Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2020.10 (Nov 17 2020 - 19:53:12 +0300)
- DRAM: 1024 MiB
- Trying to boot from MMC1
- U-Boot 2020.10 (Nov 17 2020 - 19:53:12 +0300) Allwinner Technology
- CPU: Allwinner A31s (SUN6I)
- Model: Sinovoip BPI-M2
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0, mmc@1c11000: 1
- Loading Environment from FAT... Unable to use mmc 0:1... EDID block 0: checksum error, retrying
- EDID block 0: checksum error, retrying
- EDID block 0: checksum error
- In: serial
- Out: serial
- Err: serial
- Net: eth0: ethernet@1c30000
- starting USB...
- Bus usb@1c1a000: USB EHCI 1.00
- Bus usb@1c1a400: USB OHCI 1.0
- scanning bus usb@1c1a000 for devices... 2 USB Device(s) found
- scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 2124 bytes read in 3 ms (691.4 KiB/s)
- ## Executing script at 43100000
- Boot script loaded from mmc
- 114 bytes read in 2 ms (55.7 KiB/s)
- 4868400 bytes read in 217 ms (21.4 MiB/s)
- 26019 bytes read in 3 ms (8.3 MiB/s)
- ## Flattened Device Tree blob at 46000000
- Booting using the fdt blob at 0x46000000
- Loading Device Tree to 49f91000, end 49ffffff ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.0-rc4-next-20201117-sunxi (sergey@hanni-desktop-ubuntu) (arm-linux-gnueabihf-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-20190
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Sinovoip BPI-M2
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 16 MiB at 0x7f000000
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
- [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] percpu: Embedded 15 pages/cpu s31436 r8192 d21812 u61440
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 console=tty1 net.ifnames=0 ipv6.disable=1 consoleblank=0 loglevel=7 earlyprintk rootfstype=ext4 r
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1010404K/1048576K available (7168K kernel code, 903K rwdata, 1964K rodata, 1024K init, 272K bss, 21788K reserved, 16384K cma-reserved, 245760K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x4d8 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000019] Switching to timer-based delay loop, resolution 41ns
- [ 0.000264] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000444] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000789] Console: colour dummy device 80x30
- [ 0.001285] printk: console [tty1] enabled
- [ 0.001337] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.001372] pid_max: default: 32768 minimum: 301
- [ 0.001520] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001553] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002218] CPU: Testing write buffer coherency: ok
- [ 0.002524] /cpus/cpu@0 missing clock-frequency property
- [ 0.002557] /cpus/cpu@1 missing clock-frequency property
- [ 0.002584] /cpus/cpu@2 missing clock-frequency property
- [ 0.002611] /cpus/cpu@3 missing clock-frequency property
- [ 0.002631] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.003115] Setting up static identity map for 0x40100000 - 0x40100060
- [ 0.003247] rcu: Hierarchical SRCU implementation.
- [ 0.003670] smp: Bringing up secondary CPUs ...
- [ 0.014287] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.024965] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.035596] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.035688] smp: Brought up 1 node, 4 CPUs
- [ 0.035748] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.035765] CPU: All CPU(s) started in HYP mode.
- [ 0.035779] CPU: Virtualization extensions available.
- [ 0.036313] devtmpfs: initialized
- [ 0.041919] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
- [ 0.042155] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.042195] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.042898] pinctrl core: initialized pinctrl subsystem
- [ 0.043842] NET: Registered protocol family 16
- [ 0.045089] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.046090] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.046552] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.046593] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.064974] SCSI subsystem initialized
- [ 0.065332] usbcore: registered new interface driver usbfs
- [ 0.065396] usbcore: registered new interface driver hub
- [ 0.065458] usbcore: registered new device driver usb
- [ 0.065642] mc: Linux media interface: v0.10
- [ 0.065685] videodev: Linux video capture interface: v2.00
- [ 0.065778] pps_core: LinuxPPS API ver. 1 registered
- [ 0.065798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.065835] PTP clock support registered
- [ 0.066198] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.067063] clocksource: Switched to clocksource arch_sys_counter
- [ 0.073825] NET: Registered protocol family 2
- [ 0.074291] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.074337] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.074439] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.074568] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.074691] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.074755] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.074945] NET: Registered protocol family 1
- [ 0.075335] RPC: Registered named UNIX socket transport module.
- [ 0.075360] RPC: Registered udp transport module.
- [ 0.075376] RPC: Registered tcp transport module.
- [ 0.075391] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.076081] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- [ 0.076391] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.077550] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 0.083176] NFS: Registering the id_resolver key type
- [ 0.083230] Key type id_resolver registered
- [ 0.083246] Key type id_legacy registered
- [ 0.083340] bounce: pool size: 64 pages
- [ 0.083392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.083416] io scheduler mq-deadline registered
- [ 0.083432] io scheduler kyber registered
- [ 0.089583] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.089916] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing
- [ 0.136418] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.138182] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
- [ 0.138955] printk: console [ttyS0] disabled
- [ 0.159145] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 54, base_baud = 1500000) is a U6_16550A
- [ 0.852247] printk: console [ttyS0] enabled
- [ 0.866453] libphy: Fixed MDIO Bus: probed
- [ 0.871043] CAN device driver interface
- [ 0.875259] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 0.883939] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 0.890317] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 0.896310] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 0.902647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.909206] ehci-platform: EHCI generic platform driver
- [ 0.914639] ehci-platform 1c1a000.usb: EHCI Host Controller
- [ 0.920260] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
- [ 0.928333] ehci-platform 1c1a000.usb: irq 41, io mem 0x01c1a000
- [ 0.957073] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
- [ 0.963843] hub 1-0:1.0: USB hub found
- [ 0.967648] hub 1-0:1.0: 1 port detected
- [ 0.972053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.978266] ohci-platform: OHCI generic platform driver
- [ 0.983689] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
- [ 0.990342] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
- [ 0.998227] ohci-platform 1c1a400.usb: irq 42, io mem 0x01c1a400
- [ 1.071618] hub 2-0:1.0: USB hub found
- [ 1.075403] hub 2-0:1.0: 1 port detected
- [ 1.081307] sun6i-rtc 1f00000.rtc: registered as rtc0
- [ 1.086398] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:13 UTC (13)
- [ 1.094424] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 1.099094] i2c /dev entries driver
- [ 1.104189] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 1.112813] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- [ 1.112866] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
- [ 1.121650] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
- [ 1.130501] sun4i-ss 1c15000.crypto-engine: Die ID 5
- [ 1.145040] usbcore: registered new interface driver usbhid
- [ 1.150657] usbhid: USB HID core driver
- [ 1.156534] NET: Registered protocol family 17
- [ 1.161042] can: controller area network core
- [ 1.165466] NET: Registered protocol family 29
- [ 1.169936] can: raw protocol
- [ 1.172909] can: broadcast manager protocol
- [ 1.177115] can: netlink gateway - max_hops=1
- [ 1.181658] Key type dns_resolver registered
- [ 1.186148] Registering SWP/SWPB emulation handler
- [ 1.205173] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 1.213087] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 1.221821] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 1.228207] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 1.234212] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 1.240610] sun6i-a31-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
- [ 1.250631] axp20x-i2c 0-0068: AXP20x variant AXP221 found
- [ 1.266136] input: axp20x-pek as /devices/platform/soc/1f03400.i2c/i2c-0/0-0068/axp221-pek/input/input0
- [ 1.292190] vdd-3v0: supplied by regulator-dummy
- [ 1.297584] vdd-gpu: supplied by regulator-dummy
- [ 1.302966] vdd-cpu: supplied by regulator-dummy
- [ 1.308367] vdd-sys-dll: supplied by regulator-dummy
- [ 1.314089] vcc-dram: supplied by regulator-dummy
- [ 1.318998] dc1sw: supplied by vdd-3v0
- [ 1.323529] vdd-cpus: supplied by vcc-dram
- [ 1.328392] vcc-wifi: supplied by regulator-dummy
- [ 1.333733] vcc-gmac: Bringing 1800000uV into 2500000-2500000uV
- [ 1.340411] vcc-gmac: supplied by regulator-dummy
- [ 1.346401] avcc: supplied by regulator-dummy
- [ 1.350880] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 1.357911] vdd-csi: Bringing 700000uV into 1800000-1800000uV
- [ 1.364959] vdd-csi: supplied by vdd-3v0
- [ 1.369636] eldo2: supplied by vdd-3v0
- [ 1.374144] eldo3: supplied by vdd-3v0
- [ 1.378687] vcc-mac: supplied by regulator-dummy
- [ 1.383922] avdd-csi: Bringing 700000uV into 2800000-2800000uV
- [ 1.390513] avdd-csi: supplied by regulator-dummy
- [ 1.395853] vcc-pb: Bringing 700000uV into 3300000-3300000uV
- [ 1.402857] vcc-pb: supplied by regulator-dummy
- [ 1.408167] dldo4: supplied by regulator-dummy
- [ 1.412842] rtc_ldo: supplied by regulator-dummy
- [ 1.418233] ldo_io0: supplied by regulator-dummy
- [ 1.423478] vcc-pm-cpus: Bringing 3800000uV into 1800000-1800000uV
- [ 1.431523] vcc-pm-cpus: supplied by regulator-dummy
- [ 1.437330] axp20x-i2c 0-0068: Supply for drivevbus (drivevbus) resolved to itself
- [ 1.444905] drivevbus: supplied by regulator-dummy
- [ 1.450196] axp20x-adc axp22x-adc: DMA mask not set
- [ 1.456548] axp20x-i2c 0-0068: AXP20X driver loaded
- [ 1.462141] Registered IR keymap rc-empty
- [ 1.466222] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
- [ 1.472976] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input1
- [ 1.480426] sunxi-ir 1f02000.ir: initialized sunXi IR driver
- [ 1.488813] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- [ 1.488950] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 1.488993] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
- [ 1.489695] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
- [ 1.498004] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 1.506034] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 1.514479] debugfs: Directory '1c20800.pinctrl-vcc-pa' with parent 'reg-dummy-regulator-dummy' already present!
- [ 1.514926] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
- [ 1.519724] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 1.528262] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 1.534675] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 1.568278] sun7i-dwmac 1c30000.ethernet: Version ID not available
- [ 1.570132] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
- [ 1.574507] sun7i-dwmac 1c30000.ethernet: DWMAC1000
- [ 1.586434] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported
- [ 1.593696] sun7i-dwmac 1c30000.ethernet: Normal descriptors
- [ 1.599388] sun7i-dwmac 1c30000.ethernet: Ring mode enabled
- [ 1.605480] libphy: stmmac: probed
- [ 1.614304] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.621311] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.628288] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.636468] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.638272] mmc1: host does not support reading read-only switch, assuming write-enable
- [ 1.652275] mmc1: new high speed SDHC card at address 0001
- [ 1.652568] hub 1-1:1.0: USB hub found
- [ 1.658587] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
- [ 1.661777] hub 1-1:1.0: 4 ports detected
- [ 1.670263] mmcblk1: p1
- [ 1.673466] random: fast init done
- [ 1.679705] mmc0: new high speed SDIO card at address 0001
- [ 1.680736] ALSA device list:
- [ 1.688205] No soundcards found.
- [ 1.691799] Waiting for root device /dev/mmcblk0p1...
- [ 31.837141] vdd-gpu: disabling
- [ 31.840844] dc1sw: disabling
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement