API tools faq
paste
Guest User

CE 9.2.8

a guest
Nov 29th, 2025
53
0
359 days
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 110.67 KB | None | 0 0
raw download clone embed print report
  1. [ 0.278676@1] PPP generic driver version 2.4.2
  2. [ 0.278836@1] NET: Registered protocol family 24
  3. [ 0.278926@1] usbcore: registered new interface driver smsc95xx
  4. [ 0.279146@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  5. [ 0.279159@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  6. [ 0.279259@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  7. [ 0.279437@1] usbcore: registered new interface driver usb-storage
  8. [ 0.280112@1] usbcore: registered new interface driver usbserial
  9. [ 0.280191@1] usbcore: registered new interface driver usbserial_generic
  10. [ 0.280253@1] usbserial: USB Serial support registered for generic
  11. [ 0.280315@1] usbcore: registered new interface driver pl2303
  12. [ 0.280372@1] usbserial: USB Serial support registered for pl2303
  13. [ 0.280916@1] mousedev: PS/2 mouse device common for all mice
  14. [ 0.281123@1] i2c /dev entries driver
  15. [ 0.281739@1] ledtrig-cpu: registered to indicate activity on CPUs
  16. [ 0.281856@1] hidraw: raw HID events driver (C) Jiri Kosina
  17. [ 0.283719@1] usbcore: registered new interface driver usbhid
  18. [ 0.283725@1] usbhid: USB HID core driver
  19. [ 0.283841@1] ashmem: initialized
  20. [ 0.284088@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80003b24c0
  21. [ 0.284107@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  22. [ 0.284119@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  23. [ 0.289009@1] console [ttyS0] enabled
  24. [ 0.289216@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80003bc4c0
  25. [ 0.289230@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  26. [ 0.289637@1] hdmitx: system: hdmitx_hdcp_init
  27. [ 0.290041@1] aml_vrtc rtc.30: rtc core: registered aml_vrtc as rtc0
  28. [ 0.290162@1] secmon has 1 memory regions
  29. [ 0.290184@1] secmon: share in base: 0xffffff80003d6000, share out base: 0xffffff80003d8000
  30. [ 0.290191@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
  31. [ 0.290194@1] secmon: probe done
  32. [ 0.290338@1] storage: storage in base: 0xffffff8001800000
  33. [ 0.290341@1] storage: storage out base: 0xffffff8001880000
  34. [ 0.290344@1] storage: storage block base: 0xffffff8001900000
  35. [ 0.290347@1] storage: probe done!
  36. [ 0.290572@1] aml_sd_emmc_probe: line 3594
  37. [ 0.290576@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  38. [ 0.290898@1] aml_sd_emmc_reg_init 1149
  39. [ 0.290950@1] get property: ocr_avail, value:0x00200080
  40. [ 0.290954@1] get property: f_min, value:300000
  41. [ 0.290957@1] get property: f_max, value:200000000
  42. [ 0.290961@1] get property: max_req_size, value:0x00020000
  43. [ 0.290968@1] get property: pinname, str:emmc
  44. [ 0.290974@1] get property: card_type, value:1
  45. [ 0.290977@1] get property: tx_phase, value:0
  46. [ 0.290986@1] get property: gpio_dat3, str:
  47. [ 0.290990@1] get property: hw_reset, str:
  48. [ 0.291011@1] emmc:pdata->caps = c0000d47
  49. [ 0.291016@1] emmc:pdata->caps2 = 60
  50. [ 0.291019@1] emmc:pdata->pm_caps = 0
  51. [ 0.291027@1] storage 2, boot 2
  52. [ 0.291030@1] get_storage_dev return 2
  53. [ 0.292579@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() fail!
  54. [ 0.292596@1] aml_sd_emmc_probe: line 3594
  55. [ 0.292764@1] aml_sd_emmc_reg_init 1149
  56. [ 0.292811@1] get property: port, value:0x00000001
  57. [ 0.292815@1] get property: ocr_avail, value:0x00200080
  58. [ 0.292818@1] get property: f_min, value:400000
  59. [ 0.292821@1] get property: f_max, value:100000000
  60. [ 0.292826@1] get property: max_req_size, value:0x00020000
  61. [ 0.292829@1] get property: irq_in, value:3
  62. [ 0.292833@1] get property: irq_out, value:5
  63. [ 0.292839@1] get property: gpio_cd, str:
  64. [ 0.292843@1] get property: pinname, str:sd
  65. [ 0.292847@1] get property: jtag_pin, str:
  66. [ 0.292852@1] get property: card_type, value:5
  67. [ 0.292856@1] get property: gpio_dat3, str:
  68. [ 0.292867@1] sd:pdata->caps = 7
  69. [ 0.292870@1] sd:pdata->caps2 = 0
  70. [ 0.292873@1] sd:pdata->pm_caps = 0
  71. [ 0.292936@1] [aml_is_card_insert] card IN
  72. [ 0.394112@3] normal card in
  73. [ 0.429711@1] [aml_is_card_insert] card IN
  74. [ 0.429764@3] [aml_is_card_insert] card IN
  75. [ 0.429775@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  76. [ 0.429800@3] aml_sd_emmc_probe: line 3594
  77. [ 0.430156@3] aml_sd_emmc_reg_init 1149
  78. [ 0.430215@3] get property: ocr_avail, value:0x00200080
  79. [ 0.430219@3] get property: f_min, value:400000
  80. [ 0.430222@3] get property: f_max, value:200000000
  81. [ 0.430226@3] get property: max_req_size, value:0x00020000
  82. [ 0.430232@3] get property: pinname, str:sdio
  83. [ 0.430237@3] get property: card_type, value:3
  84. [ 0.430262@3] sdio:pdata->caps = 7810f
  85. [ 0.430266@3] sdio:pdata->caps2 = 0
  86. [ 0.430269@3] sdio:pdata->pm_caps = 1
  87. [ 0.469517@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  88. [ 0.469761@1] ion_dev has 1 memory regions
  89. [ 0.472003@1] fb: osd_init_module
  90. [ 0.472066@1] fb: viu vsync irq: 35
  91. [ 0.472072@1] meson-fb has 1 memory regions
  92. [ 0.472096@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
  93. [ 0.472110@1] fb: osd_probe vinfo:ffffffc001d76310
  94. [ 0.472115@1] fb: init fbdev bpp is:32
  95. [ 0.472203@1] sd: new high speed SDXC card at address 0001
  96. [ 0.472210@1] sd: clock 50000000, 4-bit-bus-width
  97. [ 0.472210@1]
  98. [ 0.472465@1] fb: set osd0 reverse as NONE
  99. [ 0.472721@1] mmcblk0: sd:0001 SD128 116 GiB
  100. [ 0.473382@1] mmcblk0: p1 p2
  101. [ 0.487251@0] fb: osd probe OK
  102. [ 0.487396@0] ge2d: ge2d_init_module
  103. [ 0.487405@0] ge2d: ge2d_dev major:243
  104. [ 0.487654@1] ge2d: ge2d clock is 400 MHZ
  105. [ 0.487659@1] ge2d: ge2d: pdev=ffffffc02686b400, irq=182, rstc=0xffffffc025d36d80, clk=ffffffc01037be00
  106. [ 0.487691@1] ge2d: mapped phy: 0xd0160000
  107. [ 0.487697@1] ge2d: ge2d start monitor
  108. [ 0.487732@2] ge2d: ge2d workqueue monitor start
  109. [ 0.487887@1] codec:Amlogic A/V streaming port init
  110. [ 0.488984@1] codec:get gate demux control ok ffffffc025dbbb00
  111. [ 0.488991@1] codec:get gate parser_top control ok ffffffc025dbbb80
  112. [ 0.488997@1] codec:get gate vpu_intr control ok ffffffc025dbbc00
  113. [ 0.489004@1] codec:get gate vdec control ok ffffffc025dbbc80
  114. [ 0.489442@1] codec:[tsync_pcr_init]init success.
  115. [ 0.489531@1] codec:amvideocap_probe,amvideocap
  116. [ 0.489536@1] codec:use cma buf.
  117. [ 0.491017@1] codec:vdec_request_irq ffffffc0015a48d8, vsync
  118. [ 0.491163@1] codec:create_ge2d_work_queue video task ok
  119. [ 0.491601@1] rdma_register, rdma_table_addr ffffff800062d000 rdma_table_addr_phy 36210000 reg_buf ffffffc026a98000
  120. [ 0.491606@1] rdma_register success, handle 2 table_size 32768
  121. [ 0.491610@1] video_rdma:rdma_init video rdma handle = 2.
  122. [ 0.491619@1] codec:register clk_set_setting cpu[31]
  123. [ 0.492086@1] DI: di_module_init ok.
  124. [ 0.492095@1] DI: di_module_init: major 239
  125. [ 0.492253@1] DI: di_probe
  126. [ 0.492374@1] deinterlace has 1 memory regions
  127. [ 0.492411@1] DI: di reveser memory 0x3c900000, size 30MB.
  128. [ 0.492419@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
  129. [ 0.492424@1] DI-di_probe: get flag_cma error.
  130. [ 0.492467@1] di_irq:78,timerc_irq:38
  131. [ 0.492589@1] rdma_register, rdma_table_addr ffffff8000636000 rdma_table_addr_phy 3620a000 reg_buf ffffffc025d8a000
  132. [ 0.492593@1] rdma_register success, handle 3 table_size 8192
  133. [ 0.492596@1] DI: di_probe allocate rdma channel 3.
  134. [ 0.492600@1] DI: DI hw version 2.
  135. [ 0.492610@1] 0x000000db:Y=db,U=0,V=0
  136. [ 0.492614@1] 0x000000dc:Y=dc,U=0,V=0
  137. [ 0.492617@1] 0x000000dd:Y=dd,U=0,V=0
  138. [ 0.492620@1] 0x000000de:Y=de,U=0,V=0
  139. [ 0.492623@1] 0x000000df:Y=df,U=0,V=0
  140. [ 0.492626@1] 0x000000e0:Y=e0,U=0,V=0
  141. [ 0.492629@1] 0x000000e1:Y=e1,U=0,V=0
  142. [ 0.492632@1] 0x000000e2:Y=e2,U=0,V=0
  143. [ 0.492635@1] 0x000000e3:Y=e3,U=0,V=0
  144. [ 0.492638@1] 0x000000f0:Y=f0,U=0,V=0
  145. [ 0.492643@1] 0x000000f1:Y=f1,U=0,V=0
  146. [ 0.492646@1] 0x000000f2:Y=f2,U=0,V=0
  147. [ 0.492649@1] 0x000000f3:Y=f3,U=0,V=0
  148. [ 0.492652@1] 0x000000f4:Y=f4,U=0,V=0
  149. [ 0.492656@1] 0x000000f5:Y=f5,U=0,V=0
  150. [ 0.492659@1] 0x000000f6:Y=f6,U=0,V=0
  151. [ 0.492663@1] 0x000000f7:Y=f7,U=0,V=0
  152. [ 0.492666@1] 0x000000f8:Y=f8,U=0,V=0
  153. [ 0.492669@1] 0x000000f9:Y=f9,U=0,V=0
  154. [ 0.492672@1] 0x000000fa:Y=fa,U=0,V=0
  155. [ 0.492675@1] 0x000000fb:Y=fb,U=0,V=0
  156. [ 0.492678@1] 0x000000fc:Y=fc,U=0,V=0
  157. [ 0.492964@1] efusekeynum: 4
  158. [ 0.492972@1] efusekeyname: mac offset: 0 size: 6
  159. [ 0.492979@1] efusekeyname: mac_bt offset: 6 size: 6
  160. [ 0.492985@1] efusekeyname: mac_wifi offset: 12 size: 6
  161. [ 0.492991@1] efusekeyname: usid offset: 18 size: 16
  162. [ 0.493183@1] efuse efuse.10: probe OK!
  163. [ 0.493358@1] key unify config unifykey-num is 14
  164. [ 0.493400@1] key unify fact unifykey-num is 14
  165. [ 0.493404@1] aml_unifykeys_probe:1280=============unifykey_devno:ed00000
  166. [ 0.493565@1] 6unifykey: device unifykeys created ok
  167. [ 0.493632@1] 6aml_unifykeys_init done!
  168. [ 0.493636@1] PPMGRDRV: warn: ppmgr module init func called
  169. [ 0.493677@1] PPMGRDRV: err: ppmgr_driver_probe called
  170. [ 0.496325@1] ppmgr has 1 memory regions
  171. [ 0.496346@1] PPMGRDRV: info: init ppmgr memsource 3a900000->3c8fffff
  172. [ 0.496352@1] PPMGRDRV: info: ppmgr_dev major:236
  173. [ 0.496519@1] PPMGRDRV: info: ppmgr_probe done
  174. [ 0.496689@1] amlogic rfkill init
  175. [ 0.496791@1] audio_dsp: [dsp]register dsp to char divece(257)
  176. [ 0.497275@1] amaudio: amaudio: driver amaudio succuess!
  177. [ 0.497566@1] [RX]-hdmirx: hdmirx_init.
  178. [ 0.497570@1] ESM HLD: Initializing...
  179. [ 0.497574@1] ESM HLD: Registering device range 'esm_rx'...
  180. [ 0.497579@1] ESM HLD: Device range 'esm_rx' has been registered.
  181. [ 0.497583@1] ESM HLD: Creating class /sys/class/elliptic_rx...
  182. [ 0.497639@1] ESM HLD: The class /sys/class/elliptic_rx has been created.
  183. [ 0.497643@1] ESM HLD: Creating device 'esm_rx'...
  184. [ 0.497724@1] ESM HLD: Device 'esm_rx' has been created.
  185. [ 0.497728@1] ESM HLD: Done initializing the HLD driver.
  186. [ 0.497731@1] module init
  187. [ 0.497907@1] storage 2, boot 2
  188. [ 0.497911@1] get_storage_dev return 2
  189. [ 0.500058@1] nandphy: Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  190. [ 0.500191@1] nandphy: ######STS IRQ mode for nand driver
  191. [ 0.500234@1] nandphy: NAND device id: 2c 44 44 4b a9 0 0 0
  192. [ 0.500240@1] nandphy: detect NAND device: D revision NAND 4GiB MT29F32G08CBADA
  193. [ 0.500854@1] nandphy: param data[32~43]: 4d, 49, 43, 52,4f, 4e
  194. [ 0.500856@1] nandphy: nand Manufacturer: micron
  195. [ 0.500856@1]
  196. [ 0.553007@1] nandphy: micron_check_rand_mode()
  197. [ 0.553219@2] nandphy: clk_reg = 81000244
  198. [ 0.553225@2] nandphy: bus_c=6,bus_t=7,sys=4.0ns,T_REA=16,T_RHOH=15
  199. [ 0.553229@2] nandphy: new oob mode
  200. [ 0.554152@2] nandphy: NAND CKECK:arg nbbt:arg_valid=1,blk_addr=5,page_addr=0
  201. [ 0.557420@2] nandphy: NAND CKECK:arg ncnf:arg_valid=1,blk_addr=4,page_addr=0
  202. [ 0.559611@0] hdmitx: plugin
  203. [ 0.573874@2] nandphy: NAND CKECK:arg phyp:arg_valid=1,blk_addr=9,page_addr=1
  204. [ 0.589832@2] nandphy: NAND CKECK:arg nkey:arg_valid=1,blk_addr=10,page_addr=0
  205. [ 0.614552@0] EDID Parser:
  206. [ 0.614934@0] hdmitx: get dtd0 vic: 16
  207. [ 0.614941@0] hdmitx: get dtd1 vic: 4
  208. [ 0.614960@0] hdmitx: get dtd2 vic: 20
  209. [ 0.614964@0] hdmitx: edid: find IEEEOUT
  210. [ 0.614969@0] hdmitx: edid: check sum valid
  211. [ 0.614971@0] hdmitx: edid: check sum valid
  212. [ 0.614979@0] hdmitx: update rx hdr info 0 at edid parsing
  213. [ 0.614982@0] hdmitx: edid: Setting maxTMDSclock from range block
  214. [ 0.614988@0] hdmitx: edid: check sum valid
  215. [ 0.614991@0] hdmitx: edid: check sum valid
  216. [ 0.614995@0] hdmitx: edid: blk0 raw data
  217. [ 0.615026@0] 00ffffffffffff004c2d6d07344332422314010380301b782a78f1a655489b26
  218. [ 0.615026@0] 125054bfef80714f8100814081809500950fa940b300023a801871382d40582c
  219. [ 0.615026@0] 4500dd0c1100001e011d007251d01e206e285500dd0c1100001e000000fd0038
  220. [ 0.615026@0] 4b1e5111000a202020202020000000fc00534d4258323233310a20202020014d
  221. [ 0.615026@0]
  222. [ 0.615026@0]
  223. [ 0.615036@0] hdmitx: edid: blk1 raw data
  224. [ 0.615066@0] 02031cf14890041f0514131203230907078301000066030c00200080011d80d0
  225. [ 0.615066@0] 721c1620102c2580dd0c1100009e011d8018711c1620582c2500dd0c1100009e
  226. [ 0.615066@0] 011d00bc52d01e20b8285540dd0c1100001e8c0ad090204031200c405500dd0c
  227. [ 0.615066@0] 110000188c0ad08a20e02d10103e9600dd0c1100001800000000000000000036
  228. [ 0.615066@0]
  229. [ 0.615066@0]
  230. [ 0.615102@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  231. [ 0.615110@0] hdmitx: video: auto - get current mode: 720p50hz vmode_e 14
  232. [ 0.615115@0] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
  233. [ 0.615118@0] hdmitx: update rx hdr info 0
  234. [ 0.615121@0] hdmitx: update physcial size: 480 270
  235. [ 0.615138@0] hdmitx: hdev->para now = para at 0x01d72448
  236. [ 0.615143@0] hdmitx: Stream colourdepth is 8 in para 0x01d72448 (1280x720p50hz - VIC: 19)
  237. [ 0.615150@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 19
  238. [ 0.615157@0] hdmtix: set audio
  239. [ 0.615170@0] hdmitx tx_aud_src = 0
  240. [ 0.615197@0] hdmitx: fs = 0, cd = 4, tmds_clk = 74250
  241. [ 0.615201@2] nandphy: NAND CKECK:arg ndtb:arg_valid=1,blk_addr=7,page_addr=33
  242. [ 0.615206@0] hdmitx aud_n_para = 6144
  243. [ 0.615225@0] hdmitx set channel status
  244. [ 0.645475@0] nandphy: NAND CKECK:arg nenv:arg_valid=1,blk_addr=8,page_addr=153
  245. [ 0.648158@0] nandphy: nfboot :
  246. [ 0.648165@0] nandphy: off:0x000000000000-0x000000800000 :partn=0:single_chip single_plane
  247. [ 0.648168@0] nandphy: nfcache :
  248. [ 0.648172@0] nandphy: off:0x000006800000-0x000029000000 :partn=2:single_chip multi_plane
  249. [ 0.648174@0] nandphy: nfcode :
  250. [ 0.648178@0] nandphy: off:0x00002f800000-0x000077000000 :partn=9:single_chip multi_plane
  251. [ 0.648181@0] nandphy: nfdata :
  252. [ 0.648184@0] nandphy: off:0x0000a6800000-0x000059800000 :partn=1:single_chip multi_plane
  253. [ 0.649946@0] ntd->name: nfcache
  254. [ 0.649960@0] nftl: nftl version 160602M
  255. [ 0.650079@0] nftl: size_in_blk 164; total_block 163;
  256. [ 0.650084@0] nftl: get the phy_dev_size=24000000H tmp_off_size=240000H phy_dev_block=91H
  257. [ 0.650088@0] nftl: nftl start:size_in_blk=163,free_block_num=18
  258. [ 0.683673@0] nftl: found discard block:111
  259. [ 0.698314@0] nftl: average_erase_count:0
  260. [ 0.698319@0] nftl: used_blk_cnt = 102,total_blocks = 145
  261. [ 0.750925@0] nftl: currnet_discard_block1 = 111
  262. [ 0.754321@0] nftl: reach the last discard page:5
  263. [ 0.754367@0] nftl: free block cnt = 151
  264. [ 0.754370@0] nftl: new current block is 62
  265. [ 0.754373@0] nftl: discard_page_cnt = 5
  266. [ 0.754376@0] nftl: current_used_discard_block=111,current_discard_block_used_count=131
  267. [ 0.754813@0] nftl: unmappig_pages=35717,discarded_pages=26,mapping_pages=1377
  268. [ 0.756088@0] ntd->name: nfcode
  269. [ 0.756101@0] nftl: nftl version 160602M
  270. [ 0.756443@0] nftl: get the phy_dev_size=6b000000H tmp_off_size=6b0000H phy_dev_block=1aeH
  271. [ 0.756447@0] nftl: nftl start:size_in_blk=476,free_block_num=46
  272. [ 0.894865@0] nftl: average_erase_count:0
  273. [ 0.894873@0] nftl: used_blk_cnt = 365,total_blocks = 430
  274. [ 1.084353@0] nftl: free block cnt = 338
  275. [ 1.084357@0] nftl: new current block is 110
  276. [ 1.084361@0] nftl: current_used_discard_block=109,current_discard_block_used_count=458
  277. [ 1.085626@0] nftl: unmappig_pages=82834,discarded_pages=0,mapping_pages=27246
  278. [ 1.089283@0] ntd->name: nfdata
  279. [ 1.089299@0] nftl: nftl version 160602M
  280. [ 1.089583@0] nftl: the space is size = -1
  281. [ 1.190646@0] nftl: found discard block:356
  282. [ 1.190934@0] nftl: average_erase_count:4
  283. [ 1.190940@0] nftl: used_blk_cnt = 357,total_blocks = 321
  284. [ 1.376532@0] nftl: currnet_discard_block1 = 356
  285. [ 1.417362@0] nftl: reach the last discard page:72
  286. [ 1.417545@0] nftl: free block cnt = 13
  287. [ 1.417549@0] nftl: new current block is 301
  288. [ 1.417552@0] nftl: discard_page_cnt = 72
  289. [ 1.417555@0] nftl: current_used_discard_block=356,current_discard_block_used_count=2
  290. [ 1.418480@0] nftl: unmappig_pages=45693,discarded_pages=3641,mapping_pages=32842
  291. [ 1.419866@0] saradc c1108680.saradc: initialized by BL30
  292. [ 1.419882@0] saradc c1108680.saradc: calibration start:
  293. [ 1.419926@0] saradc c1108680.saradc: nominal=0, value=0
  294. [ 1.419969@0] saradc c1108680.saradc: nominal=256, value=249
  295. [ 1.420011@0] saradc c1108680.saradc: nominal=512, value=504
  296. [ 1.420054@0] saradc c1108680.saradc: nominal=768, value=761
  297. [ 1.420096@0] saradc c1108680.saradc: nominal=1023, value=1017
  298. [ 1.420101@0] saradc c1108680.saradc: calibration end: coef=4096
  299. [ 1.420299@0] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
  300. [ 1.420304@0] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
  301. [ 1.420315@0] gpio-key gpio_keypad.47: gpio_key: 0 power(125)
  302. [ 1.420342@0] gpio-key gpio_keypad.47: start setup_timer
  303. [ 1.420347@0] gpio-key gpio_keypad.47: power key(116) registed.
  304. [ 1.420474@0] input: gpio_keypad as /devices/gpio_keypad.47/input/input0
  305. [ 1.420594@0] gpio-key gpio_keypad.47: gpio keypad register input device completed.
  306. [ 1.420604@0] input input0: gpio keypad major:231
  307. [ 1.420870@0] cpuinfo: probe done
  308. [ 1.421355@0] input: cec_input as /devices/virtual/input/input1
  309. [ 1.421540@0] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  310. [ 1.422081@0] cectx aocec: aml_cec_probe(): no hhi reg resource
  311. [ 1.428042@0] cectx aocec: aml_cec_probe(): can't find hdmirx
  312. [ 1.434799@0] cec: wake up flag:0
  313. [ 1.436777@0] aml-i2s-dai I2S.38: I2S Mic is in platform!
  314. [ 1.436943@0] aml_pcm_dai: pcm mode detection =1
  315. [ 1.437695@0] aml_snd_card: headphone detection disable=1
  316. [ 1.437700@0] aml_snd_card: no spk event delay time set
  317. [ 1.438223@0] aml_snd_m8_card aml_m8_snd.46: dummy <-> I2S.38 mapping ok
  318. [ 1.438543@0] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.39 mapping ok
  319. [ 1.438568@0] aml_pcm: enter aml_pcm_new dai->name: PCM.40 dai->id: 0
  320. [ 1.438637@0] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.40 mapping ok
  321. [ 1.442196@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
  322. [ 1.446204@0] TCP: cubic registered
  323. [ 1.446852@0] NET: Registered protocol family 10
  324. [ 1.447354@0] NET: Registered protocol family 17
  325. [ 1.447412@0] Key type dns_resolver registered
  326. [ 1.448190@0] Registering SWP/SWPB emulation handler
  327. [ 1.448610@0] regulator-dummy: disabling
  328. [ 1.448890@0] console [netcon0] enabled
  329. [ 1.448893@0] netconsole: network logging started
  330. [ 1.448925@0] aml_vrtc rtc.30: setting system clock to 2015-01-01 00:00:05 UTC (1420070405)
  331. [ 1.449852@0] cpufreq-scpi cpufreq-meson.7: enter cpufreq
  332. [ 1.449880@0] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
  333. [ 1.452334@0] gxbb_pm: enter meson_pm_probe!
  334. [ 1.452381@0] gxbb_pm: meson_pm_probe done
  335. [ 1.452860@0] cpucore_cooling_register, max_cpu_core_num:4
  336. [ 1.468087@0] aml_istbt_dev_ready NULL
  337. [ 1.468142@0] ALSA device list:
  338. [ 1.468146@0] #0: AML-M8AUDIO
  339. [ 1.468656@0] Freeing unused kernel memory: 936K (ffffffc001c1c000 - ffffffc001d06000)
  340. [ 1.504808@1] fb: Frame buffer memory assigned at
  341. [ 1.504819@1] fb: 0, phy: 0x000000003e700000, vir:0xffffff8001c00000, size=24576K
  342. [ 1.504819@1]
  343. [ 1.504828@1] fb: ---------------clear fb0 memory ffffff8001c00000
  344. [ 1.519526@0] input input0: key 116 up
  345. [ 1.520971@2] fb: osd[0] canvas.idx =0x40
  346. [ 1.520976@2] fb: osd[0] canvas.addr=0x3e700000
  347. [ 1.520980@2] fb: osd[0] canvas.width=7680
  348. [ 1.520983@2] fb: osd[0] canvas.height=3240
  349. [ 1.520986@2] fb: osd[0] frame.width=1920
  350. [ 1.520990@2] fb: osd[0] frame.height=1080
  351. [ 1.527286@2] fb: osd[0] canvas.idx =0x40
  352. [ 1.527287@2] fb: osd[0] canvas.addr=0x3e700000
  353. [ 1.527289@2] fb: osd[0] canvas.width=7680
  354. [ 1.527290@2] fb: osd[0] canvas.height=2160
  355. [ 1.527291@2] fb: osd[0] frame.width=1280
  356. [ 1.527292@2] fb: osd[0] frame.height=720
  357. [ 1.549010@1] fb: Frame buffer memory assigned at
  358. [ 1.549022@1] fb: 1, phy: 0x000000003ff00000, vir:0xffffff8003480000, size=1024K
  359. [ 1.549022@1]
  360. [ 1.549031@1] fb: fb1 open, logo index:1
  361. [ 1.587323@3] codec:free_alloced_keep_buffer (null). (null). (null)
  362. [ 1.587460@3] vfm_map_store:rm default
  363. [ 1.587460@3]
  364. [ 1.587574@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  365. [ 1.587574@3]
  366. [ 1.595689@3] fb: osd[0] enable: 1 (sh)
  367. [ 1.607325@3] fb: osd[1] enable: 0 (sh)
  368. [ 1.647293@2] Console: switching to colour frame buffer device 160x45
  369. [ 1.666904@2] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
  370. [ 2.169640@0] dwc_otg: Core Release: 3.10a
  371. [ 2.169649@0] dwc_otg: Setting default values for core params
  372. [ 2.169661@0] dwc_otg: curmode: 1, host_only: 1
  373. [ 2.181843@0] dwc_otg: Using Buffer DMA mode
  374. [ 2.181849@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  375. [ 2.181853@0] dwc_otg: Working on port type = HOST
  376. [ 2.182341@0] dwc_otg dwc2_b: DWC OTG Controller
  377. [ 2.182365@0] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
  378. [ 2.182386@0] dwc_otg dwc2_b: irq 63, io mem 0x00000000
  379. [ 2.182391@0] dwc_otg: -------hcd->flags.d32 = 0
  380. [ 2.182411@0] dwc_otg: Init: Port Power? op_state=1
  381. [ 2.182414@0] dwc_otg: Init1: Power Port (0)
  382. [ 2.182560@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  383. [ 2.182567@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  384. [ 2.182573@0] usb usb1: Product: DWC OTG Controller
  385. [ 2.182578@0] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
  386. [ 2.182583@0] usb usb1: SerialNumber: dwc2_b
  387. [ 2.183097@2] hub 1-0:1.0: USB hub found
  388. [ 2.183119@2] hub 1-0:1.0: 1 port detected
  389. [ 2.183312@2] dwc_otg: usb0: type: 1 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
  390. [ 2.194927@2] dwc_otg: Core Release: 3.10a
  391. [ 2.194933@2] dwc_otg: Setting default values for core params
  392. [ 2.194945@2] dwc_otg: curmode: 1, host_only: 1
  393. [ 2.207125@2] dwc_otg: Using Buffer DMA mode
  394. [ 2.207130@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  395. [ 2.207134@2] dwc_otg: Working on port type = HOST
  396. [ 2.207379@2] dwc_otg dwc2_a: DWC OTG Controller
  397. [ 2.207398@2] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
  398. [ 2.207417@2] dwc_otg dwc2_a: irq 62, io mem 0x00000000
  399. [ 2.207422@2] dwc_otg: -------hcd->flags.d32 = 0
  400. [ 2.207442@2] dwc_otg: Init: Port Power? op_state=1
  401. [ 2.207445@2] dwc_otg: Init1: Power Port (0)
  402. [ 2.207578@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  403. [ 2.207585@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  404. [ 2.207591@2] usb usb2: Product: DWC OTG Controller
  405. [ 2.207596@2] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
  406. [ 2.207601@2] usb usb2: SerialNumber: dwc2_a
  407. [ 2.208028@2] hub 2-0:1.0: USB hub found
  408. [ 2.208050@2] hub 2-0:1.0: 1 port detected
  409. [ 2.211791@2] Checking disk(s): LABEL=COREELEC LABEL=STORAGE
  410. [ 2.379583@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
  411. [ 2.453040@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  412. [ 2.453040@0]
  413. [ 2.477871@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  414. [ 2.477871@1]
  415. [ 2.502594@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  416. [ 2.502594@0]
  417. [ 2.516200@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  418. [ 2.516200@1]
  419. [ 2.529999@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  420. [ 2.529999@1]
  421. [ 2.531502@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  422. [ 2.531502@1]
  423. [ 2.532904@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  424. [ 2.532904@1]
  425. [ 2.535359@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  426. [ 2.535359@1]
  427. [ 2.537895@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  428. [ 2.537895@1]
  429. [ 2.544498@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  430. [ 2.544498@1]
  431. [ 2.558002@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  432. [ 2.558002@1]
  433. [ 2.559604@0] usb 1-1: new high-speed USB device number 2 using dwc_otg
  434. [ 2.559722@2] dwc_otg: Indeed it is in host mode hprt0 = 00001101
  435. [ 2.582696@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  436. [ 2.582696@3]
  437. [ 2.759789@2] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  438. [ 2.759801@2] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  439. [ 2.759807@2] usb 1-1: Product: USB 2.0 Hub
  440. [ 2.760321@2] hub 1-1:1.0: USB hub found
  441. [ 2.760369@2] hub 1-1:1.0: 4 ports detected
  442. [ 2.760731@2] dwc_otg: Indeed it is in host mode hprt0 = 00041901
  443. [ 2.939537@2] usb 2-1: new low-speed USB device number 2 using dwc_otg
  444. [ 2.940256@2] dwc_otg: Indeed it is in host mode hprt0 = 00041901
  445. [ 3.096749@2] random: nonblocking pool is initialized
  446. [ 3.142798@1] usb 2-1: New USB device found, idVendor=0810, idProduct=0001
  447. [ 3.142804@1] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  448. [ 3.142810@1] usb 2-1: Product: USB Gamepad
  449. [ 3.147587@2] input: USB Gamepad as /devices/dwc2_a/usb2/2-1/2-1:1.0/0003:0810:0001.0001/input/input2
  450. [ 3.147975@1] pantherlord 0003:0810:0001.0001: input,hidraw0: USB HID v1.10 Joystick [ USB Gamepad ] on usb-dwc2_a-1/input0
  451. [ 3.147999@1] pantherlord 0003:0810:0001.0001: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <[email protected]>
  452. [ 3.239664@2] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
  453. [ 3.360797@2] usb 1-1.2: New USB device found, idVendor=0a05, idProduct=7211
  454. [ 3.360804@2] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  455. [ 3.360810@2] usb 1-1.2: Product: USB2.0 HUB
  456. [ 3.361352@2] hub 1-1.2:1.0: USB hub found
  457. [ 3.361513@2] hub 1-1.2:1.0: 4 ports detected
  458. [ 3.439588@2] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  459. [ 3.550701@2] usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601
  460. [ 3.550708@2] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  461. [ 3.550718@2] usb 1-1.3: Product: 802.11 n WLAN
  462. [ 3.550723@2] usb 1-1.3: Manufacturer: MediaTek
  463. [ 3.550728@2] usb 1-1.3: SerialNumber: 1.0
  464. [ 3.829596@2] usb 1-1.2.1: new low-speed USB device number 5 using dwc_otg
  465. [ 3.934353@2] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  466. [ 3.934360@2] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  467. [ 3.934366@2] usb 1-1.2.1: Product: Usb Mouse
  468. [ 3.934371@2] usb 1-1.2.1: Manufacturer: SIGMACHIP
  469. [ 3.938324@2] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0002/input/input3
  470. [ 3.938728@1] hid-generic 0003:1C4F:0048.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  471. [ 4.169687@2] usb 1-1.2.4: new low-speed USB device number 6 using dwc_otg
  472. [ 4.275044@2] usb 1-1.2.4: New USB device found, idVendor=1c4f, idProduct=0002
  473. [ 4.275051@2] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  474. [ 4.275057@2] usb 1-1.2.4: Product: USB Keyboard
  475. [ 4.275062@2] usb 1-1.2.4: Manufacturer: SIGMACHIP
  476. [ 4.279049@2] input: SIGMACHIP USB Keyboard as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:1C4F:0002.0003/input/input4
  477. [ 4.279316@1] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-dwc2_b-1.2.4/input0
  478. [ 4.282332@2] input: SIGMACHIP USB Keyboard as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:1C4F:0002.0004/input/input5
  479. [ 4.282579@2] hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-dwc2_b-1.2.4/input1
  480. [ 5.510174@2] usb 1-1.2.1: USB disconnect, device number 5
  481. [ 5.859641@2] usb 1-1.2.1: new low-speed USB device number 7 using dwc_otg
  482. [ 5.964378@2] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  483. [ 5.964385@2] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  484. [ 5.964391@2] usb 1-1.2.1: Product: Usb Mouse
  485. [ 5.964396@2] usb 1-1.2.1: Manufacturer: SIGMACHIP
  486. [ 5.968021@2] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0005/input/input6
  487. [ 5.968365@2] hid-generic 0003:1C4F:0048.0005: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  488. [ 7.558723@2] usb 1-1.2.1: USB disconnect, device number 7
  489. [ 7.869705@2] usb 1-1.2.1: new low-speed USB device number 8 using dwc_otg
  490. [ 7.974468@2] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  491. [ 7.974476@2] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  492. [ 7.974481@2] usb 1-1.2.1: Product: Usb Mouse
  493. [ 7.974486@2] usb 1-1.2.1: Manufacturer: SIGMACHIP
  494. [ 7.978123@2] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0006/input/input7
  495. [ 7.978464@2] hid-generic 0003:1C4F:0048.0006: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  496. [ 9.607263@2] usb 1-1.2.1: USB disconnect, device number 8
  497. [ 9.929599@2] usb 1-1.2.1: new low-speed USB device number 9 using dwc_otg
  498. [ 10.034448@2] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  499. [ 10.034456@2] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  500. [ 10.034461@2] usb 1-1.2.1: Product: Usb Mouse
  501. [ 10.034467@2] usb 1-1.2.1: Manufacturer: SIGMACHIP
  502. [ 10.038106@2] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0007/input/input8
  503. [ 10.038440@2] hid-generic 0003:1C4F:0048.0007: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  504. [ 10.561796@2] fsck: CP437: Invalid argument
  505. [ 10.561907@2] fsck: fsck.fat 4.1 (2017-01-24)
  506. [ 10.562049@2] fsck: /dev/mmcblk0p1: 78 files, 22030/65501 clusters
  507. [ 10.562223@2] fsck: STORAGE: Superblock last mount time is in the future.
  508. [ 10.562431@2] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
  509. [ 10.562611@2] fsck: STORAGE: Superblock last write time (Thu Apr 11 16:29:06 2019,
  510. [ 10.562760@2] fsck: now = Thu Jan 1 00:00:06 2015) is in the future.
  511. [ 10.562820@2] fsck: FIXED.
  512. [ 10.563019@2] fsck: STORAGE: 11/30404608 files (0.0% non-contiguous), 3843214/121614336 blocks
  513. [ 10.964932@1] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  514. [ 10.965283@1] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  515. [ 11.152605@2] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  516. [ 11.582723@0] systemd[1]: System time before build time, advancing clock.
  517. [ 11.636920@0] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  518. [ 11.637228@0] systemd[1]: Detected architecture arm64.
  519. [ 11.637296@0] systemd[1]: Running with unpopulated /etc.
  520. [ 11.639104@0] systemd[1]: Set hostname to <CoreELEC>.
  521. [ 11.639180@0] systemd[1]: Cannot open /etc/machine-id: No such file or directory
  522. [ 11.655815@2] usb 1-1.2.1: USB disconnect, device number 9
  523. [ 11.903941@0] systemd[1]: Populated /etc with preset unit settings.
  524. [ 11.911791@0] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  525. [ 11.911808@0] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  526. [ 12.003660@1] systemd[1]: Listening on RPCbind Server Activation Socket.
  527. [ 12.004394@1] systemd[1]: Listening on udev Control Socket.
  528. [ 12.006907@1] systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
  529. [ 12.006954@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  530. [ 12.007098@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  531. [ 12.008000@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  532. [ 12.009182@1] systemd[1]: Starting Show Version...
  533. [ 12.009691@2] usb 1-1.2.1: new low-speed USB device number 10 using dwc_otg
  534. [ 12.010227@1] systemd[1]: Listening on Journal Socket (/dev/log).
  535. [ 12.011311@1] systemd[1]: Created slice User and Session Slice.
  536. [ 12.011636@1] systemd[1]: Listening on initctl Compatibility Named Pipe.
  537. [ 12.011876@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  538. [ 12.011955@1] systemd[1]: Reached target Slices.
  539. [ 12.012029@1] systemd[1]: Reached target RPC Port Mapper.
  540. [ 12.012618@1] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  541. [ 12.012936@1] systemd[1]: Listening on udev Kernel Socket.
  542. [ 12.013324@1] systemd[1]: Listening on Journal Socket.
  543. [ 12.015292@1] systemd[1]: Starting Setup NTP servers for timesyncd...
  544. [ 12.018241@1] systemd[1]: Mounting POSIX Message Queue File System...
  545. [ 12.018748@1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  546. [ 12.020681@1] systemd[1]: Mounting Variable Directory...
  547. [ 12.022784@1] systemd[1]: Mounting Kernel Debug File System...
  548. [ 12.023557@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  549. [ 12.023696@1] systemd[1]: Reached target Paths.
  550. [ 12.025686@1] systemd[1]: Starting Create Persistent Log Directory on /storage...
  551. [ 12.042378@3] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  552. [ 12.044593@3] systemd[1]: Starting Wait For Kernel Time Synchronized...
  553. [ 12.071520@2] systemd[1]: Started Show Version.
  554. [ 12.079233@2] systemd[1]: Started Setup NTP servers for timesyncd.
  555. [ 12.079879@2] systemd[1]: Mounted POSIX Message Queue File System.
  556. [ 12.080261@2] systemd[1]: Mounted Variable Directory.
  557. [ 12.080593@2] systemd[1]: Mounted Kernel Debug File System.
  558. [ 12.081418@2] systemd[1]: Started Create Persistent Log Directory on /storage.
  559. [ 12.082791@2] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  560. [ 12.084933@2] systemd[1]: Starting Create kernel modules tree from overlays...
  561. [ 12.114379@3] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  562. [ 12.114392@3] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  563. [ 12.114398@3] usb 1-1.2.1: Product: Usb Mouse
  564. [ 12.114403@3] usb 1-1.2.1: Manufacturer: SIGMACHIP
  565. [ 12.118280@3] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0008/input/input9
  566. [ 12.118682@3] hid-generic 0003:1C4F:0048.0008: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  567. [ 12.120304@1] kernel-overlays-setup: setup base modules
  568. [ 12.155788@1] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29
  569. [ 12.197722@1] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  570. [ 12.197888@1] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  571. [ 12.198095@1] kernel-overlays-setup: done
  572. [ 12.210384@1] systemd[1]: kernel-overlays.service: Succeeded.
  573. [ 12.299928@1] systemd[1]: Started Create kernel modules tree from overlays.
  574. [ 12.302919@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  575. [ 12.306759@1] systemd[1]: Starting Load Kernel Modules...
  576. [ 12.309846@1] systemd[1]: Starting Mounting swapfile...
  577. [ 12.312447@1] systemd[1]: Starting Setup machine-id...
  578. [ 12.315234@1] systemd[1]: Starting udev Coldplug all Devices...
  579. [ 12.319118@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
  580. [ 12.446341@1] Linux video capture interface: v2.00
  581. [ 12.474699@1] systemd[1]: Started Mounting swapfile.
  582. [ 12.475125@1] systemd[1]: Reached target Swap.
  583. [ 12.477153@1] systemd[1]: Mounting Temporary Directory (/tmp)...
  584. [ 12.486180@1] systemd[1]: Mounted Temporary Directory (/tmp).
  585. [ 12.486602@1] systemd[1]: Reached target Local File Systems.
  586. [ 12.512522@0] amlvid:err: amlvideo_init called
  587. [ 12.512530@0] amlvid:err: amlvideo_create_instance called
  588. [ 12.512539@0] amlvid:err: v4l2_dev.name=:amlvideo-000
  589. [ 12.512739@0] amlvideo-000: V4L2 device registered as video10
  590. [ 12.523939@1] systemd[1]: Started Setup machine-id.
  591. [ 12.526102@1] systemd[1]: Starting Create Static Device Nodes in /dev...
  592. [ 12.528524@1] systemd[1]: Starting Journal Service...
  593. [ 12.539442@0] Triggered SDIO WiFi power on and bus rescan.
  594. [ 12.539471@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Disable! 234
  595. [ 12.563424@1] systemd[1]: Started Create Static Device Nodes in /dev.
  596. [ 12.833743@3] systemd[1]: Started udev Coldplug all Devices.
  597. [ 12.838589@3] systemd[1]: Started Journal Service.
  598. [ 12.840018@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Enable! 234
  599. [ 12.877164@2] systemd-journald[2256]: Received request to flush runtime journal from PID 1
  600. [ 13.150697@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  601. [ 13.150711@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  602. [ 13.150725@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  603. [ 13.151744@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  604. [ 13.151748@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  605. [ 13.151758@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  606. [ 13.156356@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  607. [ 13.156366@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  608. [ 13.156378@1] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  609. [ 13.157393@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  610. [ 13.157398@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  611. [ 13.157408@1] aml_sd_emmc_data_thread 2639 sdio: cmd:5
  612. [ 13.158418@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  613. [ 13.158423@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  614. [ 13.158432@1] aml_sd_emmc_data_thread 2639 sdio: cmd:5
  615. [ 13.159441@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  616. [ 13.159446@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  617. [ 13.159454@1] aml_sd_emmc_data_thread 2639 sdio: cmd:5
  618. [ 13.160464@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  619. [ 13.160470@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  620. [ 13.160483@1] aml_sd_emmc_data_thread 2639 sdio: cmd:5
  621. [ 13.161501@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  622. [ 13.161505@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  623. [ 13.161515@1] aml_sd_emmc_data_thread 2639 sdio: cmd:55
  624. [ 13.162536@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  625. [ 13.162547@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  626. [ 13.162569@1] aml_sd_emmc_data_thread 2639 sdio: cmd:55
  627. [ 13.163597@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  628. [ 13.163603@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  629. [ 13.163616@1] aml_sd_emmc_data_thread 2639 sdio: cmd:55
  630. [ 13.164633@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  631. [ 13.164639@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  632. [ 13.164650@1] aml_sd_emmc_data_thread 2639 sdio: cmd:55
  633. [ 13.169462@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  634. [ 13.169474@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  635. [ 13.169534@1] aml_sd_emmc_data_thread 2639 sdio: cmd:1
  636. [ 13.169569@1] sdio: error -110 whilst initialising MMC card
  637. [ 13.170669@0] [sdio_reinit] finish
  638. [ 13.185577@2] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
  639. [ 13.185588@2] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  640. [ 13.704359@2] usb 1-1.2.1: USB disconnect, device number 10
  641. [ 14.069730@2] usb 1-1.2.1: new low-speed USB device number 11 using dwc_otg
  642. [ 14.174533@2] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048
  643. [ 14.174550@2] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  644. [ 14.174556@2] usb 1-1.2.1: Product: Usb Mouse
  645. [ 14.174561@2] usb 1-1.2.1: Manufacturer: SIGMACHIP
  646. [ 14.178445@2] input: SIGMACHIP Usb Mouse as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0009/input/input10
  647. [ 14.178822@2] hid-generic 0003:1C4F:0048.0009: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-dwc2_b-1.2.1/input0
  648. [ 14.497450@3] Console: switching to colour dummy device 80x25
  649. [ 14.755133@2] mali-utgard d00c0000.mali: max pp is 3
  650. [ 14.755149@2] mali-utgard d00c0000.mali: set min pp to default 1
  651. [ 14.755154@2] mali-utgard d00c0000.mali: min pp is 1
  652. [ 14.755159@2] mali-utgard d00c0000.mali: set min clk default to 0
  653. [ 14.755165@2] mali-utgard d00c0000.mali: min clk is 0
  654. [ 14.755227@2] mali-utgard d00c0000.mali: hiu io source 0xffffff8000afe000
  655. [ 14.755543@2] mali-utgard d00c0000.mali: hiu io source 0xffffff8000b7e000
  656. [ 14.755551@2] mali-utgard d00c0000.mali: num of pp used most of time 3
  657. [ 14.755557@2] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
  658. [ 14.755633@2] mali-utgard d00c0000.mali: max clk set 5
  659. [ 14.755638@2] mali-utgard d00c0000.mali: max clk is 5
  660. [ 14.755644@2] mali-utgard d00c0000.mali: turbo clk set to 6
  661. [ 14.755649@2] mali-utgard d00c0000.mali: turbo clk is 6
  662. [ 14.755654@2] mali-utgard d00c0000.mali: default clk is 3
  663. [ 14.755662@2] mali-utgard d00c0000.mali: ====================0====================
  664. [ 14.755662@2] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
  665. [ 14.755672@2] mali-utgard d00c0000.mali: ====================1====================
  666. [ 14.755672@2] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
  667. [ 14.755681@2] mali-utgard d00c0000.mali: ====================2====================
  668. [ 14.755681@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
  669. [ 14.755691@2] mali-utgard d00c0000.mali: ====================3====================
  670. [ 14.755691@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
  671. [ 14.755700@2] mali-utgard d00c0000.mali: ====================4====================
  672. [ 14.755700@2] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
  673. [ 14.755715@2] mali-utgard d00c0000.mali: ====================5====================
  674. [ 14.755715@2] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
  675. [ 14.755725@2] mali-utgard d00c0000.mali: ====================6====================
  676. [ 14.755725@2] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
  677. [ 14.755732@2] mali-utgard d00c0000.mali: clock dvfs table size is 7
  678. [ 14.798336@0] gpu cooling register okay with err=0
  679. [ 14.798542@0] gpu core cooling register okay with err=0
  680. [ 14.811830@1] Mali: Mali device driver loaded
  681. [ 14.890380@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  682. [ 14.890380@2]
  683. [ 14.891650@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  684. [ 14.891650@2]
  685. [ 14.920982@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  686. [ 14.920982@2]
  687. [ 14.942165@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  688. [ 14.942165@2]
  689. [ 14.943516@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  690. [ 14.943516@2]
  691. [ 14.963712@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  692. [ 14.963712@1]
  693. [ 15.012204@1] cfg80211: Calling CRDA to update world regulatory domain
  694. [ 15.015213@1] mtprealloc: module license 'unspecified' taints kernel.
  695. [ 15.015229@1] Disabling lock debugging due to kernel taint
  696. [ 15.015914@1] HTTX_BUFFER [14340]
  697. [ 15.015922@1] TX_BUFFER [3844]
  698. [ 15.015925@1] MAX_RXBULK_SIZE [24576]
  699. [ 15.015929@1] CMD_RSP_BULK_SIZE [1024]
  700. [ 15.016036@1] ==>[0]:PreBuff:0xffffffc026278000, DmaAddr:0x640122880
  701. [ 15.016040@1] ==>[1]:PreBuff:0xffffffc026274000, DmaAddr:0x640106496
  702. [ 15.016045@1] ==>[2]:PreBuff:0xffffffc024f00000, DmaAddr:0x619708416
  703. [ 15.016048@1] ==>[3]:PreBuff:0xffffffc024f80000, DmaAddr:0x620232704
  704. [ 15.016052@1] ==>[4]:PreBuff:0xffffffc023d58000, DmaAddr:0x601194496
  705. [ 15.016056@1] ==>[5]:PreBuff:0xffffffc023d4c000, DmaAddr:0x601145344
  706. [ 15.016060@1] ==>[6]:PreBuff:0xffffffc024f78000, DmaAddr:0x620199936
  707. [ 15.016064@1] ==>[7]:PreBuff:0xffffffc023c74000, DmaAddr:0x600260608
  708. [ 15.016068@1] ==>[8]:PreBuff:0xffffffc023c78000, DmaAddr:0x600276992
  709. [ 15.016072@1] ==>[9]:PreBuff:0xffffffc023c68000, DmaAddr:0x600211456
  710. [ 15.016076@1] ==>[10]:PreBuff:0xffffffc02625c000, DmaAddr:0x640008192
  711. [ 15.016079@1] ==>[11]:PreBuff:0xffffffc02620c000, DmaAddr:0x639680512
  712. [ 15.016083@1] ==>[12]:PreBuff:0xffffffc026210000, DmaAddr:0x639696896
  713. [ 15.016087@1] ==>[13]:PreBuff:0xffffffc023cf8000, DmaAddr:0x600801280
  714. [ 15.016091@1] ==>[14]:PreBuff:0xffffffc024ffc000, DmaAddr:0x620740608
  715. [ 15.016095@1] ==>[15]:PreBuff:0xffffffc023c18000, DmaAddr:0x599883776
  716. [ 15.016099@1] ==>[16]:PreBuff:0xffffffc024fe4000, DmaAddr:0x620642304
  717. [ 15.016103@1] ==>[17]:PreBuff:0xffffffc023dbc000, DmaAddr:0x601604096
  718. [ 15.016107@1] ==>[18]:PreBuff:0xffffffc023d98000, DmaAddr:0x601456640
  719. [ 15.016111@1] ==>[19]:PreBuff:0xffffffc023d50000, DmaAddr:0x601161728
  720. [ 15.016114@1] ==>[20]:PreBuff:0xffffffc023d54000, DmaAddr:0x601178112
  721. [ 15.016118@1] ==>[21]:PreBuff:0xffffffc023c60000, DmaAddr:0x600178688
  722. [ 15.016123@1] ==>[22]:PreBuff:0xffffffc023c64000, DmaAddr:0x600195072
  723. [ 15.016126@1] ==>[23]:PreBuff:0xffffffc023c58000, DmaAddr:0x600145920
  724. [ 15.016130@1] ==>[24]:PreBuff:0xffffffc023c5c000, DmaAddr:0x600162304
  725. [ 15.016134@1] ==>[25]:PreBuff:0xffffffc023c10000, DmaAddr:0x599851008
  726. [ 15.016138@1] ==>[26]:PreBuff:0xffffffc023c14000, DmaAddr:0x599867392
  727. [ 15.016142@1] ==>[27]:PreBuff:0xffffffc023d90000, DmaAddr:0x601423872
  728. [ 15.016146@1] ==>[28]:PreBuff:0xffffffc023d94000, DmaAddr:0x601440256
  729. [ 15.016150@1] ==>[29]:PreBuff:0xffffffc023c00000, DmaAddr:0x599785472
  730. [ 15.016154@1] ==>[30]:PreBuff:0xffffffc023c04000, DmaAddr:0x599801856
  731. [ 15.016158@1] ==>[31]:PreBuff:0xffffffc023d20000, DmaAddr:0x600965120
  732. [ 15.016162@1] ==>[32]:PreBuff:0xffffffc023d24000, DmaAddr:0x600981504
  733. [ 15.016166@1] ==>[33]:PreBuff:0xffffffc023db0000, DmaAddr:0x601554944
  734. [ 15.016170@1] ==>[34]:PreBuff:0xffffffc023db4000, DmaAddr:0x601571328
  735. [ 15.016174@1] ==>[35]:PreBuff:0xffffffc024ff0000, DmaAddr:0x620691456
  736. [ 15.016178@1] ==>[36]:PreBuff:0xffffffc024ff4000, DmaAddr:0x620707840
  737. [ 15.016182@1] ==>[37]:PreBuff:0xffffffc024fe8000, DmaAddr:0x620658688
  738. [ 15.016186@1] ==>[38]:PreBuff:0xffffffc024fec000, DmaAddr:0x620675072
  739. [ 15.016190@1] ==>[39]:PreBuff:0xffffffc023d60000, DmaAddr:0x601227264
  740. [ 15.016194@1] ==>[40]:PreBuff:0xffffffc023d64000, DmaAddr:0x601243648
  741. [ 15.016198@1] ==>[41]:PreBuff:0xffffffc026260000, DmaAddr:0x640024576
  742. [ 15.016202@1] ==>[42]:PreBuff:0xffffffc026264000, DmaAddr:0x640040960
  743. [ 15.016206@1] ==>[43]:PreBuff:0xffffffc026268000, DmaAddr:0x640057344
  744. [ 15.016210@1] ==>[44]:PreBuff:0xffffffc02626c000, DmaAddr:0x640073728
  745. [ 15.016214@1] ==>[45]:PreBuff:0xffffffc023d70000, DmaAddr:0x601292800
  746. [ 15.016218@1] ==>[46]:PreBuff:0xffffffc023d74000, DmaAddr:0x601309184
  747. [ 15.016222@1] ==>[47]:PreBuff:0xffffffc023d78000, DmaAddr:0x601325568
  748. [ 15.016226@1] ==>[48]:PreBuff:0xffffffc023d7c000, DmaAddr:0x601341952
  749. [ 15.016230@1] ==>[49]:PreBuff:0xffffffc023c20000, DmaAddr:0x599916544
  750. [ 15.016234@1] ==>[50]:PreBuff:0xffffffc023c24000, DmaAddr:0x599932928
  751. [ 15.016238@1] ==>[51]:PreBuff:0xffffffc023c28000, DmaAddr:0x599949312
  752. [ 15.016242@1] ==>[52]:PreBuff:0xffffffc023c2c000, DmaAddr:0x599965696
  753. [ 15.016246@1] ==>[53]:PreBuff:0xffffffc023da0000, DmaAddr:0x601489408
  754. [ 15.016250@1] ==>[54]:PreBuff:0xffffffc023da4000, DmaAddr:0x601505792
  755. [ 15.016254@1] ==>[55]:PreBuff:0xffffffc023da8000, DmaAddr:0x601522176
  756. [ 15.016258@1] ==>[56]:PreBuff:0xffffffc023dac000, DmaAddr:0x601538560
  757. [ 15.016262@1] ==>[57]:PreBuff:0xffffffc023e90000, DmaAddr:0x602472448
  758. [ 15.016266@1] ==>[58]:PreBuff:0xffffffc023e94000, DmaAddr:0x602488832
  759. [ 15.016270@1] ==>[59]:PreBuff:0xffffffc023e98000, DmaAddr:0x602505216
  760. [ 15.016274@1] ==>[60]:PreBuff:0xffffffc023e9c000, DmaAddr:0x602521600
  761. [ 15.016277@1] ==>[61]:PreBuff:0xffffffc023ea0000, DmaAddr:0x602537984
  762. [ 15.016282@1] ==>[62]:PreBuff:0xffffffc023ea4000, DmaAddr:0x602554368
  763. [ 15.016286@1] ==>[63]:PreBuff:0xffffffc023ea8000, DmaAddr:0x602570752
  764. [ 15.016290@1] ==>[64]:PreBuff:0xffffffc023eac000, DmaAddr:0x602587136
  765. [ 15.016294@1] ==>[65]:PreBuff:0xffffffc023eb0000, DmaAddr:0x602603520
  766. [ 15.016298@1] ==>[66]:PreBuff:0xffffffc023eb4000, DmaAddr:0x602619904
  767. [ 15.016302@1] ==>[67]:PreBuff:0xffffffc023eb8000, DmaAddr:0x602636288
  768. [ 15.016305@1] ==>[68]:PreBuff:0xffffffc023ebc000, DmaAddr:0x602652672
  769. [ 15.016309@1] ==>[69]:PreBuff:0xffffffc023ec0000, DmaAddr:0x602669056
  770. [ 15.016314@1] ==>[70]:PreBuff:0xffffffc025efd000, DmaAddr:0x636473344
  771. [ 15.016318@1] ==>[71]:PreBuff:0xffffffc02611e000, DmaAddr:0x638705664
  772. [ 15.016321@1] ==>[72]:PreBuff:0xffffffc023ec8000, DmaAddr:0x602701824
  773. [ 15.016326@1] ==>[73]:PreBuff:0xffffffc023ed0000, DmaAddr:0x602734592
  774. [ 15.016330@1] ==>[74]:PreBuff:0xffffffc023ed8000, DmaAddr:0x602767360
  775. [ 15.016334@1] ==>[75]:PreBuff:0xffffffc023ee0000, DmaAddr:0x602800128
  776. [ 15.016337@1] ==>[76]:PreBuff:0xffffffc023ee8000, DmaAddr:0x602832896
  777. [ 15.016341@1] ==>[77]:PreBuff:0xffffffc023ef0000, DmaAddr:0x602865664
  778. [ 15.016346@1] ==>[78]:PreBuff:0xffffffc023ef8000, DmaAddr:0x602898432
  779. [ 15.016349@1] ==>[79]:PreBuff:0xffffffc023f00000, DmaAddr:0x602931200
  780. [ 15.016353@1] ==>[80]:PreBuff:0xffffffc02631dc00, DmaAddr:0x640801792
  781. [ 15.016356@1] install prealloc ok
  782. [ 15.024248@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  783. [ 15.024248@2]
  784. [ 15.042598@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  785. [ 15.042598@1]
  786. [ 15.075424@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  787. [ 15.075424@1]
  788. [ 15.075582@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  789. [ 15.075582@3]
  790. [ 15.079604@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  791. [ 15.079604@2]
  792. [ 15.151216@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
  793. [ 15.151216@1]
  794. [ 15.211603@0] rtusb init rt2870 --->
  795. [ 15.212545@0]
  796. [ 15.212545@0]
  797. [ 15.212545@0] === pAd = ffffff8003f29000, size = 1670888 ===
  798. [ 15.212545@0]
  799. [ 15.212566@0] RTMPQMemAddr[0]
  800. [ 15.212570@0] RTMPQMemAddr[1]
  801. [ 15.212575@0] RTMPQMemAddr[2]
  802. [ 15.212578@0] RTMPQMemAddr[3]
  803. [ 15.212582@0] RTMPQMemAddr[4]
  804. [ 15.212586@0] RTMPQMemAddr[5]
  805. [ 15.212590@0] RTMPQMemAddr[6]
  806. [ 15.212593@0] RTMPQMemAddr[7]
  807. [ 15.212597@0] RTMPQMemAddr[8]
  808. [ 15.212600@0] RTMPQMemAddr[9]
  809. [ 15.212603@0] RTMPQMemAddr[10]
  810. [ 15.212607@0] RTMPQMemAddr[11]
  811. [ 15.212610@0] RTMPQMemAddr[12]
  812. [ 15.212614@0] RTMPQMemAddr[13]
  813. [ 15.212618@0] RTMPQMemAddr[14]
  814. [ 15.212622@0] RTMPQMemAddr[15]
  815. [ 15.212625@0] RTMPQMemAddr[16]
  816. [ 15.212631@0] RTMPQMemAddr[17]
  817. [ 15.212635@0] RTMPQMemAddr[18]
  818. [ 15.212639@0] RTMPQMemAddr[19]
  819. [ 15.212642@0] RTMPQMemAddr[20]
  820. [ 15.212646@0] RTMPQMemAddr[21]
  821. [ 15.212650@0] RTMPQMemAddr[22]
  822. [ 15.212654@0] RTMPQMemAddr[23]
  823. [ 15.212658@0] RTMPQMemAddr[24]
  824. [ 15.212661@0] RTMPQMemAddr[25]
  825. [ 15.212665@0] RTMPQMemAddr[26]
  826. [ 15.212668@0] RTMPQMemAddr[27]
  827. [ 15.212672@0] RTMPQMemAddr[28]
  828. [ 15.212675@0] RTMPQMemAddr[29]
  829. [ 15.212679@0] RTMPQMemAddr[30]
  830. [ 15.212682@0] RTMPQMemAddr[31]
  831. [ 15.212686@0] RTMPQMemAddr[32]
  832. [ 15.212689@0] RTMPQMemAddr[33]
  833. [ 15.212693@0] RTMPQMemAddr[34]
  834. [ 15.212697@0] RTMPQMemAddr[35]
  835. [ 15.212701@0] RTMPQMemAddr[36]
  836. [ 15.212704@0] RTMPQMemAddr[37]
  837. [ 15.212708@0] RTMPQMemAddr[38]
  838. [ 15.212712@0] RTMPQMemAddr[39]
  839. [ 15.212715@0] RTMPQMemAddr[40]
  840. [ 15.212718@0] RTMPQMemAddr[41]
  841. [ 15.212722@0] RTMPQMemAddr[42]
  842. [ 15.212725@0] RTMPQMemAddr[43]
  843. [ 15.212729@0] RTMPQMemAddr[44]
  844. [ 15.212732@0] RTMPQMemAddr[45]
  845. [ 15.212736@0] RTMPQMemAddr[46]
  846. [ 15.212739@0] RTMPQMemAddr[47]
  847. [ 15.212743@0] RTMPQMemAddr[48]
  848. [ 15.212746@0] RTMPQMemAddr[49]
  849. [ 15.212750@0] RTMPQMemAddr[50]
  850. [ 15.212753@0] RTMPQMemAddr[51]
  851. [ 15.212757@0] RTMPQMemAddr[52]
  852. [ 15.212762@0] RTMPQMemAddr[53]
  853. [ 15.212766@0] RTMPQMemAddr[54]
  854. [ 15.212770@0] RTMPQMemAddr[55]
  855. [ 15.212774@0] RTMPQMemAddr[70]
  856. [ 15.212778@0] RTMPQMemAddr[71]
  857. [ 15.212782@0] RTMPQMemAddr[72]
  858. [ 15.212786@0] RTMPQMemAddr[73]
  859. [ 15.212790@0] RTMPQMemAddr[74]
  860. [ 15.212793@0] RTMPQMemAddr[75]
  861. [ 15.212797@0] RTMPQMemAddr[76]
  862. [ 15.212800@0] RTMPQMemAddr[77]
  863. [ 15.212804@0] RTMPQMemAddr[78]
  864. [ 15.212807@0] RTMPQMemAddr[79]
  865. [ 15.212810@0] RTMPQMemAddr[80]
  866. [ 15.212817@0] <-- RTMPAllocTxRxRingMemory, Status=0
  867. [ 15.213169@0] <-- RTMPAllocAdapterBlock, Status=0
  868. [ 15.213177@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
  869. [ 15.213181@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
  870. [ 15.213184@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
  871. [ 15.213187@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
  872. [ 15.213191@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
  873. [ 15.213194@0] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
  874. [ 15.213199@0] STA Driver version-JEDI.L0.MP1.mt7601u.v1.2
  875. [ 15.213413@0] ==>WaitForAsicReady MAC_CSR0=0x76010500
  876. [ 15.213755@0] ==>WaitForAsicReady MAC_CSR0=0x76010500
  877. [ 15.213874@0] NVM is EFUSE
  878. [ 15.213879@0] Endpoint(8) is for In-band Command
  879. [ 15.213883@0] Endpoint(4) is for WMM0 AC0
  880. [ 15.213886@0] Endpoint(5) is for WMM0 AC1
  881. [ 15.213890@0] Endpoint(6) is for WMM0 AC2
  882. [ 15.213893@0] Endpoint(7) is for WMM0 AC3
  883. [ 15.213897@0] Endpoint(9) is for WMM1 AC0
  884. [ 15.213900@0] Endpoint(84) is for Data-In
  885. [ 15.213904@0] Endpoint(85) is for Command Rsp
  886. [ 15.214142@0] NumOfChan ===> 58
  887. [ 15.224187@0] usbcore: registered new interface driver rt2870
  888. [ 15.665969@2] 8021q: 802.1Q VLAN Support v1.8
  889. [ 15.693382@2] 1. LDO_CTR0(6c) = a64799, PMU_OCLEVEL c
  890. [ 15.693607@2] 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
  891. [ 15.693747@2] ==>WaitForAsicReady MAC_CSR0=0x76010500
  892. [ 15.699239@2] FW Version:0.1.00 Build:7640
  893. [ 15.699248@2] Build Time:201301040941____
  894. [ 15.699262@2] ILM Length = 44276(bytes)
  895. [ 15.699266@2] DLM Length = 0(bytes)
  896. [ 15.703622@2] Loading FW....
  897. [ 15.757670@3] ==>WaitForAsicReady MAC_CSR0=0x76010500
  898. [ 16.334025@2] cfg_mode=9
  899. [ 16.334039@2] cfg_mode=9
  900. [ 16.334047@2] wmode_band_equal(): Band Equal!
  901. [ 16.337727@2] 1. Phy Mode = 14
  902. [ 16.337732@2] 2. Phy Mode = 14
  903. [ 16.347076@2] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xc, should be 9
  904. [ 16.367589@2] 3. Phy Mode = 14
  905. [ 16.367601@2] AntCfgInit: primary/secondary ant 0/1
  906. [ 16.569755@2] MCS Set = ff 00 00 00 01
  907. [ 16.579780@2] <==== STA : rt28xx_init, Status=0
  908. [ 16.581291@2] NumOfChan ===> 14
  909. [ 16.582269@2] 0x1300 = 00064300
  910. [ 16.582277@2] RTMPDrvOpen(1):Check if PDMA is idle!
  911. [ 16.582405@2] RTMPDrvOpen(2):Check if PDMA is idle!
  912. [ 16.655297@2] Registered IR keymap rc-empty
  913. [ 16.656392@2] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input11
  914. [ 16.659333@2] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
  915. [ 16.673690@1] meson-ir c8100580.meson-ir: receiver initialized
  916. [ 16.695579@3] IR Sony protocol handler initialized
  917. [ 16.703694@1] lirc_dev: IR Remote Control driver registered, major 229
  918. [ 16.703939@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input12
  919. [ 16.708266@1] IR MCE Keyboard/mouse protocol handler initialized
  920. [ 16.708279@3] IR RC5(x) protocol handler initialized
  921. [ 16.708298@0] IR NEC protocol handler initialized
  922. [ 16.708309@2] IR JVC protocol handler initialized
  923. [ 16.708481@1] IR RC6 protocol handler initialized
  924. [ 16.708731@2] IR SANYO protocol handler initialized
  925. [ 16.712606@1] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
  926. [ 16.712620@1] IR LIRC bridge handler initialized
  927. [ 18.567211@0] codec:vdec_create instance ffffff80040c2000, total 1
  928. [ 19.129735@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  929. [ 19.129788@3] aml_spdif_dai: share the same clock
  930. [ 19.129799@3] aml_audio_hw: IEC958 PCM32
  931. [ 19.129805@3] hdmitx: audio: aout notify rate 44100
  932. [ 19.129809@3] hdmitx: audio: aout notify size 32
  933. [ 19.129813@3] hdmitx: audio: aout notify format CT_PCM
  934. [ 19.129817@3] hdmtix: set audio
  935. [ 19.129831@3] hdmitx tx_aud_src = 0
  936. [ 19.129860@3] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  937. [ 19.129866@3] hdmitx aud_n_para = 6272
  938. [ 19.129885@3] hdmitx set channel status
  939. [ 19.129949@3] hdmitx: audio: Audio Type: PCM
  940. [ 19.129953@3] hdmitx: audio: set audio param
  941. [ 19.129963@3] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  942. [ 19.130035@3] aml_snd_card: audio speaker on
  943. [ 19.141762@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  944. [ 19.141771@2] aml_spdif_dai: share the same clock
  945. [ 19.141780@2] aml_audio_hw: IEC958 PCM32
  946. [ 19.141786@2] hdmitx: audio: aout notify rate 44100
  947. [ 19.141790@2] hdmitx: audio: aout notify size 32
  948. [ 19.141793@2] hdmitx: audio: no update
  949. [ 19.141802@2] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  950. [ 19.141920@2] channel count should be 8, we got 2 aborting
  951. [ 19.234528@2] vout_serve: vmode set to null
  952. [ 19.234568@2] hdmitx: video: vinfo: 720p50hz 50 1
  953. [ 19.234575@2] hdmitx: video: vinfo recalc: 720p50hz 50 1
  954. [ 19.234579@2] fb: osd current vmode=720p50hz, cmd: 0x50000
  955. [ 19.234587@2] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
  956. [ 19.234593@2] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
  957. [ 19.234607@2] tv_vout: 3tvinfo 87 not find
  958. [ 19.234611@2] tv_vout: new mode =null set ok
  959. [ 19.234615@2] vout_serve: vinfo mode is: null
  960. [ 19.234619@2] vout_serve: new mode null set ok
  961. [ 19.234631@2] hdmitx: edid: not find mapped vic
  962. [ 19.234640@2] hdmitx: video: auto - get current mode: null vmode_e 88
  963. [ 19.234649@2] hdmitx: stream colourdepth was 8 in para 0x01d72448 (1280x720p50hz)
  964. [ 19.234654@2] hdmitx: update physcial size: 480 270
  965. [ 19.234658@2] hdmitx: video: null not valid hdmi mode
  966. [ 19.234685@2] fb: osd current vmode=null, cmd: 0x10000
  967. [ 19.247353@0] hdmitx: set frac_rate_policy as 0
  968. [ 19.247377@0] vout_serve: vmode set to 720p50hz
  969. [ 19.247394@0] vout_serve: disable HDMI PHY as soon as possible
  970. [ 19.247400@0] hdmitx: video: vinfo: null 60 1
  971. [ 19.247405@0] hdmitx: video: vinfo recalc: null 60 1
  972. [ 19.247410@0] fb: osd current vmode=null, cmd: 0x50000
  973. [ 19.247416@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=14
  974. [ 19.247421@0] tv_vout: mode is 14,sync_duration_den=1,sync_duration_num=50
  975. [ 19.247432@0] tv_vout: TV mode 720p50hz selected.
  976. [ 19.247438@0]
  977. [ 19.247438@0] vdac_enable: on:0,module_sel:8
  978. [ 19.247450@0]
  979. [ 19.247450@0] vdac_enable: on:0,module_sel:8
  980. [ 19.247459@0] tv_vout: new mode =720p50hz set ok
  981. [ 19.247463@0] vout_serve: vinfo mode is: 720p50hz
  982. [ 19.247466@0] vout_serve: new mode 720p50hz set ok
  983. [ 19.247484@0] hdmitx: video: auto - get current mode: 720p50hz vmode_e 14
  984. [ 19.247488@0] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
  985. [ 19.247492@0] hdmitx: update rx hdr info 0
  986. [ 19.247495@0] hdmitx: update physcial size: 480 270
  987. [ 19.247507@0] hdmitx: hdev->para now = para at 0x01d72448
  988. [ 19.247513@0] hdmitx: Stream colourdepth is 8 in para 0x01d72448 (1280x720p50hz - VIC: 19)
  989. [ 19.247541@0] hdmitx: video: vinfo: 720p50hz 50 1
  990. [ 19.247546@0] hdmitx: video: vinfo recalc: 720p50hz 50 1
  991. [ 19.247555@0] hdmitx: system: already init VIC = 0 Now VIC = 19
  992. [ 19.247559@0] hdmitx: system: params found at 0x01d6f6c8
  993. [ 19.247563@0] hdmitx: system: cur_param = param at 0x01d6f6c8 colourdepth 8 colourspace 0
  994. [ 19.247570@0] hdmitx: video: pixel freq 74250, tmds clock 74250, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  995. [ 19.247575@0] hdmitx: rx no SCDC present indicator
  996. [ 19.249586@0] hdmitx: ddc rd8b error 0x54 0x01
  997. [ 19.251598@0] hdmitx: ddc rd8b error 0x54 0x01
  998. [ 19.251605@0] hdmirx version is 1.4 or below
  999. [ 19.251609@0] hdmitx div40: 0
  1000. [ 19.279522@1] hdmitx: system: set pll
  1001. [ 19.279529@1] hdmitx: system: param->VIC:19
  1002. [ 19.279536@1] hdmitx: 1280x720p50hz doesn't have frac_rate
  1003. [ 19.279540@1] hdmitx: set clk: VIC = 19 cd = 4 cs = 2 frac_rate = 0
  1004. [ 19.279547@1] config HPLL = 2970000
  1005. [ 19.279568@1] HPLL: 0xc800023d
  1006. [ 19.279572@1] config HPLL done
  1007. [ 19.279580@1] set_hpll_od3_clk_div[820] div = 6
  1008. [ 19.279590@1] j = 2 vid_clk_div = 1
  1009. [ 19.279602@1] hdmitx: set enc for VIC: 19
  1010. [ 19.279623@1] hdmitx_set_hw[5067] set VIC = 19
  1011. [ 19.279676@1] Set rgb_ycc to 2
  1012. [ 19.289727@0] hdmitx: system: irq 80000001
  1013. [ 19.289747@0] Start = 0x10000100 End = 0x100001ff
  1014. [ 19.289759@0] [0x10000104]: 0x00000001
  1015. [ 19.289764@0] [0x10000105]: 0x00000003
  1016. [ 19.289927@0] [0x10000170]: 0x00000004
  1017. [ 19.289957@0] [0x10000180]: 0x000000ff
  1018. [ 19.289962@0] [0x10000181]: 0x000000ff
  1019. [ 19.289967@0] [0x10000182]: 0x00000003
  1020. [ 19.289972@0] [0x10000183]: 0x00000007
  1021. [ 19.289977@0] [0x10000184]: 0x0000003f
  1022. [ 19.289983@0] [0x10000185]: 0x00000002
  1023. [ 19.289989@0] [0x10000187]: 0x000000ff
  1024. [ 19.289994@0] [0x10000188]: 0x00000003
  1025. [ 19.291519@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  1026. [ 19.291739@0] hdmitx: system: irq 80000001
  1027. [ 19.291752@0] Start = 0x10000100 End = 0x100001ff
  1028. [ 19.291763@0] [0x10000104]: 0x00000001
  1029. [ 19.291768@0] [0x10000105]: 0x00000003
  1030. [ 19.291933@0] [0x10000170]: 0x00000004
  1031. [ 19.291960@0] [0x10000180]: 0x000000ff
  1032. [ 19.291965@0] [0x10000181]: 0x000000ff
  1033. [ 19.291972@0] [0x10000182]: 0x00000003
  1034. [ 19.291977@0] [0x10000183]: 0x00000007
  1035. [ 19.291982@0] [0x10000184]: 0x0000003f
  1036. [ 19.291987@0] [0x10000185]: 0x00000002
  1037. [ 19.291993@0] [0x10000187]: 0x000000ff
  1038. [ 19.291999@0] [0x10000188]: 0x00000003
  1039. [ 19.293532@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  1040. [ 19.293750@0] hdmitx: system: irq 80000001
  1041. [ 19.293760@0] Start = 0x10000100 End = 0x100001ff
  1042. [ 19.293771@0] [0x10000104]: 0x00000001
  1043. [ 19.293776@0] [0x10000105]: 0x00000003
  1044. [ 19.293936@0] [0x10000170]: 0x00000004
  1045. [ 19.293963@0] [0x10000180]: 0x000000ff
  1046. [ 19.293969@0] [0x10000181]: 0x000000ff
  1047. [ 19.293974@0] [0x10000182]: 0x00000003
  1048. [ 19.293979@0] [0x10000183]: 0x00000007
  1049. [ 19.293984@0] [0x10000184]: 0x0000003f
  1050. [ 19.293989@0] [0x10000185]: 0x00000002
  1051. [ 19.293995@0] [0x10000187]: 0x000000ff
  1052. [ 19.294000@0] [0x10000188]: 0x00000003
  1053. [ 19.295542@1] hdmitx: ddc rd8b error 0x54 0x21
  1054. [ 19.411573@1] hdmitx: system: PHY Setting Done
  1055. [ 19.411616@0] hdmitx: system: irq 80000001
  1056. [ 19.411664@0] Start = 0x10000100 End = 0x100001ff
  1057. [ 19.411690@0] [0x10000104]: 0x00000001
  1058. [ 19.412041@0] [0x10000180]: 0x000000ff
  1059. [ 19.412053@0] [0x10000181]: 0x000000ff
  1060. [ 19.412065@0] [0x10000182]: 0x00000003
  1061. [ 19.412077@0] [0x10000183]: 0x00000007
  1062. [ 19.412089@0] [0x10000184]: 0x0000003f
  1063. [ 19.412101@0] [0x10000185]: 0x00000002
  1064. [ 19.412115@0] [0x10000187]: 0x000000ff
  1065. [ 19.412128@0] [0x10000188]: 0x00000003
  1066. [ 19.415613@1] Sink is HDMI device
  1067. [ 19.415697@1] hdmtix: set audio
  1068. [ 19.415721@1] hdmitx tx_aud_src = 0
  1069. [ 19.415774@1] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  1070. [ 19.415785@1] hdmitx aud_n_para = 6272
  1071. [ 19.415823@1] hdmitx set channel status
  1072. [ 19.415928@1] hdmitx: audio: Audio Type: PCM
  1073. [ 19.415946@1] hdmitx: video: VIC: 19 (19) 1280x720p50hz
  1074. [ 19.415968@1] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1075. [ 19.415983@1] hdmitx: video: Colorimetry: bt709
  1076. [ 19.415998@1] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1077. [ 19.416061@1] fb: osd current vmode=720p50hz, cmd: 0x10000
  1078. [ 19.674021@2] vout_serve: vmode set to null
  1079. [ 19.674059@2] vout_serve: disable HDMI PHY as soon as possible
  1080. [ 19.674066@2] hdmitx: video: vinfo: 720p50hz 50 1
  1081. [ 19.674072@2] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1082. [ 19.674077@2] fb: osd current vmode=720p50hz, cmd: 0x50000
  1083. [ 19.674085@2] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
  1084. [ 19.674090@2] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
  1085. [ 19.674103@2] tv_vout: 3tvinfo 87 not find
  1086. [ 19.674107@2] tv_vout: new mode =null set ok
  1087. [ 19.674111@2] vout_serve: vinfo mode is: null
  1088. [ 19.674115@2] vout_serve: new mode null set ok
  1089. [ 19.674125@2] hdmitx: edid: not find mapped vic
  1090. [ 19.674134@2] hdmitx: video: auto - get current mode: null vmode_e 88
  1091. [ 19.674143@2] hdmitx: stream colourdepth was 8 in para 0x01d72448 (1280x720p50hz)
  1092. [ 19.674148@2] hdmitx: display colourdepth was 8 in cur_param 0x01d6f6c8 (VIC: 19)
  1093. [ 19.674152@2] hdmitx: update physcial size: 480 270
  1094. [ 19.674156@2] hdmitx: video: null not valid hdmi mode
  1095. [ 19.674183@2] fb: osd current vmode=null, cmd: 0x10000
  1096. [ 19.692725@2] hdmitx: set frac_rate_policy as 0
  1097. [ 19.692750@2] vout_serve: vmode set to 720p50hz
  1098. [ 19.692780@2] vout_serve: disable HDMI PHY as soon as possible
  1099. [ 19.692787@2] hdmitx: video: vinfo: null 60 1
  1100. [ 19.692792@2] hdmitx: video: vinfo recalc: null 60 1
  1101. [ 19.692797@2] fb: osd current vmode=null, cmd: 0x50000
  1102. [ 19.692803@2] tv_vout: tv_set_current_vmode[930]fps_target_mode=14
  1103. [ 19.692807@2] tv_vout: mode is 14,sync_duration_den=1,sync_duration_num=50
  1104. [ 19.692818@2] tv_vout: TV mode 720p50hz selected.
  1105. [ 19.692823@2]
  1106. [ 19.692823@2] vdac_enable: on:0,module_sel:8
  1107. [ 19.692834@2]
  1108. [ 19.692834@2] vdac_enable: on:0,module_sel:8
  1109. [ 19.692844@2] tv_vout: new mode =720p50hz set ok
  1110. [ 19.692847@2] vout_serve: vinfo mode is: 720p50hz
  1111. [ 19.692851@2] vout_serve: new mode 720p50hz set ok
  1112. [ 19.692868@2] hdmitx: video: auto - get current mode: 720p50hz vmode_e 14
  1113. [ 19.692872@2] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
  1114. [ 19.692876@2] hdmitx: display colourdepth was 8 in cur_param 0x01d6f6c8 (VIC: 19)
  1115. [ 19.692880@2] hdmitx: update rx hdr info 0
  1116. [ 19.692884@2] hdmitx: update physcial size: 480 270
  1117. [ 19.692907@2] hdmitx: hdev->para now = para at 0x01d72448
  1118. [ 19.692912@2] hdmitx: display colourdepth is 10 in cur_param 0x01d6f6c8 (VIC: 19)
  1119. [ 19.692917@2] Bitdepth is set to 10 bits but display does not support deep colour
  1120. [ 19.692922@2] hdmitx: Stream colourdepth is 8 in para 0x01d72448 (1280x720p50hz - VIC: 19)
  1121. [ 19.692952@2] hdmitx: video: vinfo: 720p50hz 50 1
  1122. [ 19.692957@2] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1123. [ 19.692965@2] hdmitx: system: already init VIC = 0 Now VIC = 19
  1124. [ 19.692970@2] hdmitx: system: params found at 0x01d6f6c8
  1125. [ 19.692974@2] hdmitx: system: cur_param = param at 0x01d6f6c8 colourdepth 8 colourspace 2
  1126. [ 19.692981@2] hdmitx: video: pixel freq 74250, tmds clock 74250, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  1127. [ 19.692986@2] hdmitx: rx no SCDC present indicator
  1128. [ 19.694997@2] hdmitx: ddc rd8b error 0x54 0x01
  1129. [ 19.697009@2] hdmitx: ddc rd8b error 0x54 0x01
  1130. [ 19.697019@2] hdmirx version is 1.4 or below
  1131. [ 19.697023@2] hdmitx div40: 0
  1132. [ 19.719532@2] hdmitx: system: set pll
  1133. [ 19.719539@2] hdmitx: system: param->VIC:19
  1134. [ 19.719548@2] hdmitx: 1280x720p50hz doesn't have frac_rate
  1135. [ 19.719552@2] hdmitx: set clk: VIC = 19 cd = 4 cs = 2 frac_rate = 0
  1136. [ 19.719559@2] config HPLL = 2970000
  1137. [ 19.719580@2] HPLL: 0xc800023d
  1138. [ 19.719584@2] config HPLL done
  1139. [ 19.719591@2] set_hpll_od3_clk_div[820] div = 6
  1140. [ 19.719600@2] j = 2 vid_clk_div = 1
  1141. [ 19.719610@2] hdmitx: set enc for VIC: 19
  1142. [ 19.719630@2] hdmitx_set_hw[5067] set VIC = 19
  1143. [ 19.719687@2] Set rgb_ycc to 2
  1144. [ 19.729728@0] hdmitx: system: irq 80000001
  1145. [ 19.729751@0] Start = 0x10000100 End = 0x100001ff
  1146. [ 19.729763@0] [0x10000104]: 0x00000001
  1147. [ 19.729768@0] [0x10000105]: 0x00000003
  1148. [ 19.729932@0] [0x10000170]: 0x00000004
  1149. [ 19.729959@0] [0x10000180]: 0x000000ff
  1150. [ 19.729964@0] [0x10000181]: 0x000000ff
  1151. [ 19.729969@0] [0x10000182]: 0x00000003
  1152. [ 19.729975@0] [0x10000183]: 0x00000007
  1153. [ 19.729980@0] [0x10000184]: 0x0000003f
  1154. [ 19.729985@0] [0x10000185]: 0x00000002
  1155. [ 19.729991@0] [0x10000187]: 0x000000ff
  1156. [ 19.729996@0] [0x10000188]: 0x00000003
  1157. [ 19.731519@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  1158. [ 19.731742@0] hdmitx: system: irq 80000001
  1159. [ 19.731755@0] Start = 0x10000100 End = 0x100001ff
  1160. [ 19.731767@0] [0x10000104]: 0x00000001
  1161. [ 19.731772@0] [0x10000105]: 0x00000003
  1162. [ 19.731934@0] [0x10000170]: 0x00000004
  1163. [ 19.731962@0] [0x10000180]: 0x000000ff
  1164. [ 19.731967@0] [0x10000181]: 0x000000ff
  1165. [ 19.731972@0] [0x10000182]: 0x00000003
  1166. [ 19.731977@0] [0x10000183]: 0x00000007
  1167. [ 19.731982@0] [0x10000184]: 0x0000003f
  1168. [ 19.731987@0] [0x10000185]: 0x00000002
  1169. [ 19.731994@0] [0x10000187]: 0x000000ff
  1170. [ 19.731999@0] [0x10000188]: 0x00000003
  1171. [ 19.733536@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  1172. [ 19.733754@0] hdmitx: system: irq 80000001
  1173. [ 19.733764@0] Start = 0x10000100 End = 0x100001ff
  1174. [ 19.733775@0] [0x10000104]: 0x00000001
  1175. [ 19.733780@0] [0x10000105]: 0x00000003
  1176. [ 19.733940@0] [0x10000170]: 0x00000004
  1177. [ 19.733967@0] [0x10000180]: 0x000000ff
  1178. [ 19.733972@0] [0x10000181]: 0x000000ff
  1179. [ 19.733977@0] [0x10000182]: 0x00000003
  1180. [ 19.733982@0] [0x10000183]: 0x00000007
  1181. [ 19.733987@0] [0x10000184]: 0x0000003f
  1182. [ 19.733992@0] [0x10000185]: 0x00000002
  1183. [ 19.733999@0] [0x10000187]: 0x000000ff
  1184. [ 19.734004@0] [0x10000188]: 0x00000003
  1185. [ 19.735547@2] hdmitx: ddc rd8b error 0x54 0x21
  1186. [ 19.851581@2] hdmitx: system: PHY Setting Done
  1187. [ 19.851626@0] hdmitx: system: irq 80000001
  1188. [ 19.851682@0] Start = 0x10000100 End = 0x100001ff
  1189. [ 19.851706@0] [0x10000104]: 0x00000001
  1190. [ 19.852030@0] [0x10000180]: 0x000000ff
  1191. [ 19.852042@0] [0x10000181]: 0x000000ff
  1192. [ 19.852054@0] [0x10000182]: 0x00000003
  1193. [ 19.852066@0] [0x10000183]: 0x00000007
  1194. [ 19.852078@0] [0x10000184]: 0x0000003f
  1195. [ 19.852090@0] [0x10000185]: 0x00000002
  1196. [ 19.852104@0] [0x10000187]: 0x000000ff
  1197. [ 19.852116@0] [0x10000188]: 0x00000003
  1198. [ 19.855621@2] Sink is HDMI device
  1199. [ 19.855712@2] hdmtix: set audio
  1200. [ 19.855736@2] hdmitx tx_aud_src = 0
  1201. [ 19.855790@2] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  1202. [ 19.855802@2] hdmitx aud_n_para = 6272
  1203. [ 19.855846@2] hdmitx set channel status
  1204. [ 19.855952@2] hdmitx: audio: Audio Type: PCM
  1205. [ 19.855972@2] hdmitx: video: VIC: 19 (19) 1280x720p50hz
  1206. [ 19.855995@2] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1207. [ 19.856010@2] hdmitx: video: Colorimetry: bt709
  1208. [ 19.856025@2] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1209. [ 19.856054@2] fb: osd current vmode=720p50hz, cmd: 0x10000
  1210. [ 21.579722@3] libphy: stmmac-0:00 - Link is Up - 100/Full
  1211. [ 21.579747@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1212. [ 24.149639@2] aml_snd_card: audio speaker off
  1213. [ 895.329697@0] unlink cmd rsp urb
  1214. [ 895.329720@0] urb_enqueue:urb(ffffffc026843240) had been killed
  1215. [ 897.085420@1] 1. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
  1216. [ 897.085740@1] 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
  1217. [ 897.086009@1] ==>WaitForAsicReady MAC_CSR0=0x76010500
  1218. [ 897.089775@1] ==>WaitForAsicReady MAC_CSR0=0x76010500
  1219. [ 897.679997@0] cfg_mode=9
  1220. [ 897.680021@0] cfg_mode=9
  1221. [ 897.680037@0] wmode_band_equal(): Band Equal!
  1222. [ 897.689210@0] 1. Phy Mode = 14
  1223. [ 897.689222@0] 2. Phy Mode = 14
  1224. [ 897.701316@0] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xc, should be 9
  1225. [ 897.720335@0] 3. Phy Mode = 14
  1226. [ 897.720363@0] AntCfgInit: primary/secondary ant 0/1
  1227. [ 897.952853@2] MCS Set = ff 00 00 00 01
  1228. [ 897.962879@2] <==== STA : rt28xx_init, Status=0
  1229. [ 897.962987@2] NumOfChan ===> 14
  1230. [ 897.963983@2] 0x1300 = 00064300
  1231. [ 897.963987@2] RTMPDrvOpen(1):Check if PDMA is idle!
  1232. [ 897.964115@2] RTMPDrvOpen(2):Check if PDMA is idle!
  1233. [ 1030.675847@2] PeerBeaconAtJoinAction(): HT-CtrlChannel=1, CentralChannel=>1
  1234. [ 1030.675870@2] PeerBeaconAtJoinAction(): Set CentralChannel=1
  1235. [ 1030.891661@1] Rcv Wcid(1) AddBAReq
  1236. [ 1030.891666@1] Start Seq = 00000003
  1237. [ 1146.342007@0] vfm_map_store:rm default
  1238. [ 1146.342066@0] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
  1239. [ 1146.342209@0] codec:free_alloced_keep_buffer (null). (null). (null)
  1240. [ 1146.343355@0] codec:vdec_create instance ffffff8004133000, total 1
  1241. [ 1146.343808@0] codec:no drmmode
  1242. [ 1146.343927@0] codec:Video stbuf alloced at 0000000036800000, size = 10485760
  1243. [ 1146.343950@0] codec:vdec_init, dev_name:amvdec_h264, vdec_type=VDEC_TYPE_SINGLE
  1244. [ 1146.343954@0] codec:vdec_init set vfm decoder ffffff8004133000
  1245. [ 1146.343960@0] codec:vdec_dev_reg.mem[0x0 -- 0x0]
  1246. [ 1146.343970@0] codec:vdec base memory alloced [0000000037200000 -- 000000003a1fffff]
  1247. [ 1146.349413@0] codec:H264 sysinfo: 1280x720 duration=1600, pts_outside=1,
  1248. [ 1146.349414@0] codec:vdec_request_irq ffffffc00157ec10, vh264-irq
  1249. [ 1146.349442@0] DI: di_receiver_event_fun: vframe provider reg
  1250. [ 1146.359521@0] set run_early_proc_fun_flag to 1
  1251. [ 1146.360128@0] codec:vdec_init, vf_provider_name =
  1252. [ 1146.360649@0] codec:video first pts = 0
  1253. [ 1146.360654@0] codec:vdec_request_irq ffffffc001570128, parser
  1254. [ 1146.363309@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1255. [ 1146.363314@2] aml_spdif_dai: share the same clock
  1256. [ 1146.363323@2] aml_audio_hw: IEC958 PCM32
  1257. [ 1146.363329@2] hdmitx: audio: aout notify rate 44100
  1258. [ 1146.363331@2] hdmitx: audio: aout notify size 32
  1259. [ 1146.363333@2] hdmitx: audio: no update
  1260. [ 1146.363344@2] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1261. [ 1146.363474@2] aml_snd_card: audio speaker on
  1262. [ 1146.367625@0] [tsync_avevent]event:1, param 1
  1263. [ 1146.367630@0] video pause!
  1264. [ 1146.368268@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1265. [ 1146.368273@2] aml_spdif_dai: share the same clock
  1266. [ 1146.368284@2] aml_audio_hw: IEC958 PCM32
  1267. [ 1146.368290@2] hdmitx: audio: aout notify rate 44100
  1268. [ 1146.368291@2] hdmitx: audio: aout notify size 32
  1269. [ 1146.368293@2] hdmitx: audio: no update
  1270. [ 1146.368303@2] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1271. [ 1146.368474@2] channel count should be 8, we got 2 aborting
  1272. [ 1146.368591@0] codec:video first checkin pts = 5dc
  1273. [ 1146.368593@0] codec:first check in vpts <0x27:0x5dc> ok!
  1274. [ 1146.369010@0] codec:Enter set parameter cmd1.
  1275. [ 1146.370116@0] codec:vdec1 video changed to 3840 x 2160 60 fps clk->648MHZ
  1276. [ 1146.370136@0] codec:actual_dpb_size 24 max_dpb_size 2
  1277. [ 1146.370274@0] codec:video first pts = 5dc
  1278. [ 1146.371940@1] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
  1279. [ 1146.371946@1] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
  1280. [ 1146.388020@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1280/720/0
  1281. [ 1146.388028@0] DI:7923 disable post.
  1282. [ 1146.492600@0] codec: Frame parameters: Size 1280x720
  1283. [ 1146.492603@0] codec: progressive
  1284. [ 1146.492608@0] codec: (Full type: 0x00009000)
  1285. [ 1146.492615@0] codec: Bit depth: 8-bit, Colour range: limited
  1286. [ 1146.492621@0] codec: Primaries: bt709, Transfer function: bt709, RGB-YCC: bt709
  1287. [ 1146.492623@0] codec: No master display info
  1288. [ 1146.492645@0] vpts to scr, apts = 0x0, vpts = 0x5dc
  1289. [ 1146.528692@0] hdmitx: set frac_rate_policy as 0
  1290. [ 1146.528760@0] vout_serve: vmode set to 720p60hz
  1291. [ 1146.528817@0] vout_serve: disable HDMI PHY as soon as possible
  1292. [ 1146.528840@0] hdmitx: video: vinfo: 720p50hz 50 1
  1293. [ 1146.528856@0] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1294. [ 1146.528866@0] fb: osd current vmode=720p50hz, cmd: 0x50000
  1295. [ 1146.528882@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=13
  1296. [ 1146.528895@0] tv_vout: mode is 13,sync_duration_den=1,sync_duration_num=60
  1297. [ 1146.528919@0] tv_vout: TV mode 720p60hz selected.
  1298. [ 1146.528932@0]
  1299. [ 1146.528932@0] vdac_enable: on:0,module_sel:8
  1300. [ 1146.528956@0]
  1301. [ 1146.528956@0] vdac_enable: on:0,module_sel:8
  1302. [ 1146.528977@0] tv_vout: new mode =720p60hz set ok
  1303. [ 1146.528987@0] vout_serve: vinfo mode is: 720p60hz
  1304. [ 1146.528996@0] vout_serve: new mode 720p60hz set ok
  1305. [ 1146.529025@0] hdmitx: video: auto - get current mode: 720p60hz vmode_e 13
  1306. [ 1146.529037@0] hdmitx: stream colourdepth was 8 in para 0x01d72448 (1280x720p50hz)
  1307. [ 1146.529048@0] hdmitx: display colourdepth was 8 in cur_param 0x01d6f6c8 (VIC: 19)
  1308. [ 1146.529057@0] hdmitx: update rx hdr info 0
  1309. [ 1146.529067@0] hdmitx: update physcial size: 480 270
  1310. [ 1146.529097@0] hdmitx: hdev->para now = para at 0x01d724c8
  1311. [ 1146.529109@0] hdmitx: display colourdepth is 10 in cur_param 0x01d6f6c8 (VIC: 19)
  1312. [ 1146.529120@0] Bitdepth is set to 10 bits but display does not support deep colour
  1313. [ 1146.529132@0] hdmitx: Stream colourdepth is 8 in para 0x01d724c8 (1280x720p60hz - VIC: 4)
  1314. [ 1146.529188@0] hdmitx: video: vinfo: 720p60hz 60 1
  1315. [ 1146.529200@0] hdmitx: video: vinfo recalc: 720p60hz 60 1
  1316. [ 1146.529217@0] hdmitx: system: already init VIC = 0 Now VIC = 4
  1317. [ 1146.529228@0] hdmitx: system: params found at 0x01d6f538
  1318. [ 1146.529238@0] hdmitx: system: cur_param = param at 0x01d6f538 colourdepth 8 colourspace 0
  1319. [ 1146.529252@0] hdmitx: video: pixel freq 74250, tmds clock 74250, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  1320. [ 1146.529263@0] hdmitx: rx no SCDC present indicator
  1321. [ 1146.531287@0] hdmitx: ddc rd8b error 0x54 0x01
  1322. [ 1146.533316@0] hdmitx: ddc rd8b error 0x54 0x01
  1323. [ 1146.533332@0] hdmirx version is 1.4 or below
  1324. [ 1146.533341@0] hdmitx div40: 0
  1325. [ 1146.557907@0] hdmitx: system: set pll
  1326. [ 1146.557933@0] hdmitx: system: param->VIC:4
  1327. [ 1146.557943@0] hdmitx: set clk: VIC = 4 cd = 4 cs = 2 frac_rate = 0
  1328. [ 1146.557950@0] config HPLL = 2970000
  1329. [ 1146.557971@0] HPLL: 0xc800023d
  1330. [ 1146.557975@0] config HPLL done
  1331. [ 1146.557983@0] set_hpll_od3_clk_div[820] div = 6
  1332. [ 1146.557992@0] j = 2 vid_clk_div = 1
  1333. [ 1146.558002@0] hdmitx: set enc for VIC: 4
  1334. [ 1146.558056@0] hdmitx_set_hw[5067] set VIC = 4
  1335. [ 1146.558113@0] Set rgb_ycc to 2
  1336. [ 1146.568111@0] hdmitx: system: irq 80000001
  1337. [ 1146.569901@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1338. [ 1146.570119@0] hdmitx: system: irq 80000001
  1339. [ 1146.571913@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1340. [ 1146.572130@0] hdmitx: system: irq 80000001
  1341. [ 1146.573924@0] hdmitx: ddc rd8b error 0x54 0x21
  1342. [ 1146.574993@0] Start = 0x10000100 End = 0x100001ff
  1343. [ 1146.575005@0] [0x10000104]: 0x00000001
  1344. [ 1146.575190@0] [0x10000180]: 0x000000ff
  1345. [ 1146.575196@0] [0x10000181]: 0x000000ff
  1346. [ 1146.575201@0] [0x10000182]: 0x00000003
  1347. [ 1146.575206@0] [0x10000183]: 0x00000007
  1348. [ 1146.575211@0] [0x10000184]: 0x0000003f
  1349. [ 1146.575216@0] [0x10000185]: 0x00000002
  1350. [ 1146.575223@0] [0x10000187]: 0x000000ff
  1351. [ 1146.575228@0] [0x10000188]: 0x00000003
  1352. [ 1146.689944@0] hdmitx: system: PHY Setting Done
  1353. [ 1146.689993@0] hdmitx: system: irq 80000001
  1354. [ 1146.693992@0] Sink is HDMI device
  1355. [ 1146.694077@0] hdmtix: set audio
  1356. [ 1146.694100@0] hdmitx tx_aud_src = 0
  1357. [ 1146.694155@0] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  1358. [ 1146.694166@0] hdmitx aud_n_para = 6272
  1359. [ 1146.694203@0] hdmitx set channel status
  1360. [ 1146.694309@0] hdmitx: audio: Audio Type: PCM
  1361. [ 1146.694329@0] hdmitx: video: VIC: 4 (4) 1280x720p60hz
  1362. [ 1146.694352@0] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1363. [ 1146.694367@0] hdmitx: video: Colorimetry: bt709
  1364. [ 1146.694383@0] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1365. [ 1146.694408@0] Start = 0x10000100 End = 0x100001ff
  1366. [ 1146.694433@0] [0x10000104]: 0x00000001
  1367. [ 1146.694552@2] fb: osd current vmode=720p60hz, cmd: 0x10000
  1368. [ 1146.694771@0] [0x10000180]: 0x000000ff
  1369. [ 1146.694777@0] [0x10000181]: 0x000000ff
  1370. [ 1146.694783@0] [0x10000182]: 0x00000003
  1371. [ 1146.694789@0] [0x10000183]: 0x00000007
  1372. [ 1146.694796@0] [0x10000184]: 0x0000003f
  1373. [ 1146.694801@0] [0x10000185]: 0x00000002
  1374. [ 1146.694810@0] [0x10000187]: 0x000000ff
  1375. [ 1146.694816@0] [0x10000188]: 0x00000003
  1376. [ 1146.957671@0] codec: detect vout mode change! was 14 now 13
  1377. [ 1146.957696@0] codec: Frame parameters: Size 1280x720
  1378. [ 1146.957705@0] codec: progressive
  1379. [ 1146.957715@0] codec: (Full type: 0x00009000)
  1380. [ 1146.957725@0] codec: Bit depth: 8-bit, Colour range: limited
  1381. [ 1146.957736@0] codec: Primaries: bt709, Transfer function: bt709, RGB-YCC: bt709
  1382. [ 1146.957744@0] codec: No master display info
  1383. [ 1146.957801@0] codec:[video4osd] first picture {1280,720} pts:bb8,
  1384. [ 1146.974410@0] codec:[video4osd] first picture {1280,720} pts:1194,
  1385. [ 1146.991175@0] codec:VsyncEnableVideoLayer
  1386. [ 1147.031040@0] codec:finished correct frame dur
  1387. [ 1147.031067@0] codec: new=1600,old_duration=1600,cnt=25
  1388. [ 1155.235135@2] codec:video_blackout_policy_store(0)
  1389. [ 1155.235202@2] [tsync_avevent]event:1, param 1
  1390. [ 1155.235209@2] video pause!
  1391. [ 1155.248158@3] PPMGRVPP: info: cma free addr is 3a900000 , size is 2000000
  1392. [ 1155.248237@3] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
  1393. [ 1155.248247@3] di_receiver_event_fun: vf_notify_receiver unreg
  1394. [ 1155.248275@1] DI: di_unreg_process unreg start 1.
  1395. [ 1155.248302@1] codec_mm:NULL mem_handle for keeper!!
  1396. [ 1155.259878@1] codec:alloced keep buffer yaddr=0000000027800000,u_addr=000000003a800000,v_addr=0000000027c00000
  1397. [ 1155.259908@1] codec:vf_keep_current keep_y_addr=0000000027800000 393f0000
  1398. [ 1155.259922@1] codec:ge2d_store_frame_NV21 cur_index:s:0x626160
  1399. [ 1155.259940@1] codec:ge2d_store_frame d:0xd9d8
  1400. [ 1155.263542@0] codec:vf_keep_current: VIDTYPE_VIU_NV21
  1401. [ 1155.263556@0] codec:vf_keep_current: keep video on with keep
  1402. [ 1155.263568@0] [tsync_avevent]event:2, param 0
  1403. [ 1155.263580@0] codec:video first pts = 0
  1404. [ 1155.263612@0] DI: di_unreg_process vf unreg cost 10 ms.
  1405. [ 1155.263622@0] DI: di_unreg_process unreg stop 0.
  1406. [ 1155.270651@3] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
  1407. [ 1155.273757@3] codec:vdec_create instance ffffff8004164000, total 1
  1408. [ 1155.273806@3] codec:no drmmode
  1409. [ 1155.273861@3] codec:Video stbuf alloced at 0000000036800000, size = 10485760
  1410. [ 1155.273890@3] codec:vdec_init, dev_name:amvdec_h264, vdec_type=VDEC_TYPE_SINGLE
  1411. [ 1155.273900@3] codec:vdec_init set vfm decoder ffffff8004164000
  1412. [ 1155.273912@3] codec:vdec_dev_reg.mem[0x37200000 -- 0x3a1fffff]
  1413. [ 1155.275424@3] codec:H264 sysinfo: 1280x720 duration=1600, pts_outside=1,
  1414. [ 1155.276314@3] codec:vdec_request_irq ffffffc00157ec10, vh264-irq
  1415. [ 1155.276380@3] DI: di_receiver_event_fun: vframe provider reg
  1416. [ 1155.286434@3] set run_early_proc_fun_flag to 1
  1417. [ 1155.286746@3] codec:vdec_init, vf_provider_name =
  1418. [ 1155.287532@3] codec:video first pts = 0
  1419. [ 1155.287547@3] codec:vdec_request_irq ffffffc001570128, parser
  1420. [ 1155.309993@3] codec:video_blackout_policy_store(1)
  1421. [ 1155.752200@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
  1422. [ 1155.752232@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
  1423. [ 1155.752333@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1424. [ 1155.752345@0] aml_spdif_dai: share the same clock
  1425. [ 1155.752366@0] aml_audio_hw: IEC958 PCM32
  1426. [ 1155.752379@0] hdmitx: audio: aout notify rate 44100
  1427. [ 1155.752389@0] hdmitx: audio: aout notify size 32
  1428. [ 1155.752397@0] hdmitx: audio: no update
  1429. [ 1155.752411@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1430. [ 1158.454117@2] codec:video first checkin pts = 87fa8c
  1431. [ 1158.454129@2] codec:first check in vpts <0x27:0x87fa8c> ok!
  1432. [ 1158.454344@0] codec:Enter set parameter cmd1.
  1433. [ 1158.455404@0] codec:vdec1 video changed to 3840 x 2160 60 fps clk->648MHZ
  1434. [ 1158.455413@0] codec:actual_dpb_size 24 max_dpb_size 2
  1435. [ 1158.455493@0] codec:video first pts = 87fa8c
  1436. [ 1158.787856@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1280/720/0
  1437. [ 1158.787872@0] DI:7923 disable post.
  1438. [ 1158.800857@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1439. [ 1158.800872@1] aml_spdif_dai: share the same clock
  1440. [ 1158.800883@1] aml_audio_hw: IEC958 PCM32
  1441. [ 1158.800889@1] hdmitx: audio: aout notify rate 44100
  1442. [ 1158.800892@1] hdmitx: audio: aout notify size 32
  1443. [ 1158.800896@1] hdmitx: audio: no update
  1444. [ 1158.800908@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1445. [ 1158.801170@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1446. [ 1158.801175@1] aml_spdif_dai: share the same clock
  1447. [ 1158.801184@1] aml_audio_hw: IEC958 PCM32
  1448. [ 1158.801188@1] hdmitx: audio: aout notify rate 44100
  1449. [ 1158.801192@1] hdmitx: audio: aout notify size 32
  1450. [ 1158.801195@1] hdmitx: audio: no update
  1451. [ 1158.801202@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1452. [ 1158.801294@1] channel count should be 8, we got 2 aborting
  1453. [ 1158.801964@1] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
  1454. [ 1158.801972@1] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
  1455. [ 1158.807673@0] vpts to scr, apts = 0x0, vpts = 0x87fa8c
  1456. [ 1158.807712@0] codec:[video4osd] first picture {1280,720} pts:87fa8c,
  1457. [ 1158.807749@0] codec:new toggle keep_id
  1458. [ 1158.824361@0] codec:VsyncEnableVideoLayer
  1459. [ 1158.994149@0] codec:finished correct frame dur
  1460. [ 1158.994163@0] codec: new=1600,old_duration=1600,cnt=25
  1461. [ 1162.178109@1] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
  1462. [ 1162.178129@1] di_receiver_event_fun: vf_notify_receiver unreg
  1463. [ 1162.178158@1] DI: di_unreg_process unreg start 1.
  1464. [ 1162.178179@1] codec:DisableVideoLayer()
  1465. [ 1162.178188@1] codec:disbled keep video before free keep buffer.
  1466. [ 1162.178197@1] codec:disbled video for next before free keep buffer!
  1467. [ 1162.178206@1] codec:DisableVideoLayer()
  1468. [ 1162.178217@1] codec:free_alloced_keep_buffer 0000000027800000.000000003a800000.0000000027c00000
  1469. [ 1162.178696@1] codec:free_alloced_keep_buffer (null). (null). (null)
  1470. [ 1162.178708@1] [tsync_avevent]event:2, param 0
  1471. [ 1162.178721@1] codec:video first pts = 0
  1472. [ 1162.178745@1] DI: di_unreg_process vf unreg cost 0 ms.
  1473. [ 1162.178755@1] DI: di_unreg_process unreg stop 0.
  1474. [ 1162.190999@0] codec:VsyncDisableVideoLayer
  1475. [ 1162.191016@0] codec:AFBC off now.
  1476. [ 1162.191749@1] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
  1477. [ 1162.195749@0] codec:video_disable_store(1)
  1478. [ 1162.195775@0] codec:DisableVideoLayer()
  1479. [ 1162.195789@0] codec:free_alloced_keep_buffer (null). (null). (null)
  1480. [ 1162.195886@0] vfm_map_store:rm default
  1481. [ 1162.195971@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  1482. [ 1162.207682@0] codec:VsyncDisableVideoLayer
  1483. [ 1162.207711@0] codec:AFBC off now.
  1484. [ 1162.516140@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
  1485. [ 1162.516159@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
  1486. [ 1162.517490@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1487. [ 1162.517503@0] aml_spdif_dai: share the same clock
  1488. [ 1162.517513@0] aml_audio_hw: IEC958 PCM32
  1489. [ 1162.517520@0] hdmitx: audio: aout notify rate 44100
  1490. [ 1162.517524@0] hdmitx: audio: aout notify size 32
  1491. [ 1162.517528@0] hdmitx: audio: no update
  1492. [ 1162.517537@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1493. [ 1162.526627@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1494. [ 1162.526642@0] aml_spdif_dai: share the same clock
  1495. [ 1162.526654@0] aml_audio_hw: IEC958 PCM32
  1496. [ 1162.526661@0] hdmitx: audio: aout notify rate 44100
  1497. [ 1162.526665@0] hdmitx: audio: aout notify size 32
  1498. [ 1162.526668@0] hdmitx: audio: no update
  1499. [ 1162.526680@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1500. [ 1162.526910@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1501. [ 1162.526916@0] aml_spdif_dai: share the same clock
  1502. [ 1162.526925@0] aml_audio_hw: IEC958 PCM32
  1503. [ 1162.526930@0] hdmitx: audio: aout notify rate 44100
  1504. [ 1162.526933@0] hdmitx: audio: aout notify size 32
  1505. [ 1162.526936@0] hdmitx: audio: no update
  1506. [ 1162.526942@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1507. [ 1162.527037@0] channel count should be 8, we got 2 aborting
  1508. [ 1162.724958@1] hdmitx: set frac_rate_policy as 0
  1509. [ 1162.724987@1] vout_serve: vmode set to 720p50hz
  1510. [ 1162.725015@1] vout_serve: disable HDMI PHY as soon as possible
  1511. [ 1162.725023@1] hdmitx: video: vinfo: 720p60hz 60 1
  1512. [ 1162.725029@1] hdmitx: video: vinfo recalc: 720p60hz 60 1
  1513. [ 1162.725033@1] fb: osd current vmode=720p60hz, cmd: 0x50000
  1514. [ 1162.725041@1] tv_vout: tv_set_current_vmode[930]fps_target_mode=14
  1515. [ 1162.725046@1] tv_vout: mode is 14,sync_duration_den=1,sync_duration_num=50
  1516. [ 1162.725059@1] tv_vout: TV mode 720p50hz selected.
  1517. [ 1162.725064@1]
  1518. [ 1162.725064@1] vdac_enable: on:0,module_sel:8
  1519. [ 1162.725075@1]
  1520. [ 1162.725075@1] vdac_enable: on:0,module_sel:8
  1521. [ 1162.725085@1] tv_vout: new mode =720p50hz set ok
  1522. [ 1162.725089@1] vout_serve: vinfo mode is: 720p50hz
  1523. [ 1162.725093@1] vout_serve: new mode 720p50hz set ok
  1524. [ 1162.725107@1] hdmitx: video: auto - get current mode: 720p50hz vmode_e 14
  1525. [ 1162.725112@1] hdmitx: stream colourdepth was 8 in para 0x01d724c8 (1280x720p60hz)
  1526. [ 1162.725117@1] hdmitx: display colourdepth was 8 in cur_param 0x01d6f538 (VIC: 4)
  1527. [ 1162.725120@1] hdmitx: update rx hdr info 0
  1528. [ 1162.725124@1] hdmitx: update physcial size: 480 270
  1529. [ 1162.725138@1] hdmitx: hdev->para now = para at 0x01d72448
  1530. [ 1162.725143@1] hdmitx: display colourdepth is 10 in cur_param 0x01d6f538 (VIC: 4)
  1531. [ 1162.725147@1] Bitdepth is set to 10 bits but display does not support deep colour
  1532. [ 1162.725152@1] hdmitx: Stream colourdepth is 8 in para 0x01d72448 (1280x720p50hz - VIC: 19)
  1533. [ 1162.725182@1] hdmitx: video: vinfo: 720p50hz 50 1
  1534. [ 1162.725187@1] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1535. [ 1162.725195@1] hdmitx: system: already init VIC = 0 Now VIC = 19
  1536. [ 1162.725200@1] hdmitx: system: params found at 0x01d6f6c8
  1537. [ 1162.725205@1] hdmitx: system: cur_param = param at 0x01d6f6c8 colourdepth 8 colourspace 2
  1538. [ 1162.725211@1] hdmitx: video: pixel freq 74250, tmds clock 74250, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  1539. [ 1162.725216@1] hdmitx: rx no SCDC present indicator
  1540. [ 1162.727228@1] hdmitx: ddc rd8b error 0x54 0x01
  1541. [ 1162.729241@1] hdmitx: ddc rd8b error 0x54 0x01
  1542. [ 1162.729249@1] hdmirx version is 1.4 or below
  1543. [ 1162.729253@1] hdmitx div40: 0
  1544. [ 1162.757718@1] hdmitx: system: set pll
  1545. [ 1162.757727@1] hdmitx: system: param->VIC:19
  1546. [ 1162.757735@1] hdmitx: 1280x720p50hz doesn't have frac_rate
  1547. [ 1162.757739@1] hdmitx: set clk: VIC = 19 cd = 4 cs = 2 frac_rate = 0
  1548. [ 1162.757746@1] config HPLL = 2970000
  1549. [ 1162.757767@1] HPLL: 0xc800023d
  1550. [ 1162.757770@1] config HPLL done
  1551. [ 1162.757778@1] set_hpll_od3_clk_div[820] div = 6
  1552. [ 1162.757787@1] j = 2 vid_clk_div = 1
  1553. [ 1162.757797@1] hdmitx: set enc for VIC: 19
  1554. [ 1162.757817@1] hdmitx_set_hw[5067] set VIC = 19
  1555. [ 1162.757871@1] Set rgb_ycc to 2
  1556. [ 1162.767928@0] hdmitx: system: irq 80000001
  1557. [ 1162.767950@0] Start = 0x10000100 End = 0x100001ff
  1558. [ 1162.767962@0] [0x10000104]: 0x00000001
  1559. [ 1162.767967@0] [0x10000105]: 0x00000003
  1560. [ 1162.768127@0] [0x10000170]: 0x00000004
  1561. [ 1162.768154@0] [0x10000180]: 0x000000ff
  1562. [ 1162.768160@0] [0x10000181]: 0x000000ff
  1563. [ 1162.768165@0] [0x10000182]: 0x00000003
  1564. [ 1162.768170@0] [0x10000183]: 0x00000007
  1565. [ 1162.768175@0] [0x10000184]: 0x0000003f
  1566. [ 1162.768180@0] [0x10000185]: 0x00000002
  1567. [ 1162.768186@0] [0x10000187]: 0x000000ff
  1568. [ 1162.768192@0] [0x10000188]: 0x00000003
  1569. [ 1162.769719@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  1570. [ 1162.769940@0] hdmitx: system: irq 80000001
  1571. [ 1162.769955@0] Start = 0x10000100 End = 0x100001ff
  1572. [ 1162.769967@0] [0x10000104]: 0x00000001
  1573. [ 1162.769973@0] [0x10000105]: 0x00000003
  1574. [ 1162.770133@0] [0x10000170]: 0x00000004
  1575. [ 1162.770160@0] [0x10000180]: 0x000000ff
  1576. [ 1162.770165@0] [0x10000181]: 0x000000ff
  1577. [ 1162.770170@0] [0x10000182]: 0x00000003
  1578. [ 1162.770175@0] [0x10000183]: 0x00000007
  1579. [ 1162.770181@0] [0x10000184]: 0x0000003f
  1580. [ 1162.770186@0] [0x10000185]: 0x00000002
  1581. [ 1162.770192@0] [0x10000187]: 0x000000ff
  1582. [ 1162.770197@0] [0x10000188]: 0x00000003
  1583. [ 1162.771731@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  1584. [ 1162.771950@0] hdmitx: system: irq 80000001
  1585. [ 1162.771964@0] Start = 0x10000100 End = 0x100001ff
  1586. [ 1162.771976@0] [0x10000104]: 0x00000001
  1587. [ 1162.771981@0] [0x10000105]: 0x00000003
  1588. [ 1162.772147@0] [0x10000170]: 0x00000004
  1589. [ 1162.772175@0] [0x10000180]: 0x000000ff
  1590. [ 1162.772180@0] [0x10000181]: 0x000000ff
  1591. [ 1162.772185@0] [0x10000182]: 0x00000003
  1592. [ 1162.772191@0] [0x10000183]: 0x00000007
  1593. [ 1162.772196@0] [0x10000184]: 0x0000003f
  1594. [ 1162.772201@0] [0x10000185]: 0x00000002
  1595. [ 1162.772208@0] [0x10000187]: 0x000000ff
  1596. [ 1162.772213@0] [0x10000188]: 0x00000003
  1597. [ 1162.773742@1] hdmitx: ddc rd8b error 0x54 0x21
  1598. [ 1162.889768@1] hdmitx: system: PHY Setting Done
  1599. [ 1162.889818@0] hdmitx: system: irq 80000001
  1600. [ 1162.889872@0] Start = 0x10000100 End = 0x100001ff
  1601. [ 1162.889896@0] [0x10000104]: 0x00000001
  1602. [ 1162.890219@0] [0x10000180]: 0x000000ff
  1603. [ 1162.890231@0] [0x10000181]: 0x000000ff
  1604. [ 1162.890243@0] [0x10000182]: 0x00000003
  1605. [ 1162.890255@0] [0x10000183]: 0x00000007
  1606. [ 1162.890267@0] [0x10000184]: 0x0000003f
  1607. [ 1162.890279@0] [0x10000185]: 0x00000002
  1608. [ 1162.890293@0] [0x10000187]: 0x000000ff
  1609. [ 1162.890305@0] [0x10000188]: 0x00000003
  1610. [ 1162.893813@1] Sink is HDMI device
  1611. [ 1162.893896@1] hdmtix: set audio
  1612. [ 1162.893919@1] hdmitx tx_aud_src = 0
  1613. [ 1162.893975@1] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  1614. [ 1162.893986@1] hdmitx aud_n_para = 6272
  1615. [ 1162.894023@1] hdmitx set channel status
  1616. [ 1162.894131@1] hdmitx: audio: Audio Type: PCM
  1617. [ 1162.894151@1] hdmitx: video: VIC: 19 (19) 1280x720p50hz
  1618. [ 1162.894174@1] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1619. [ 1162.894189@1] hdmitx: video: Colorimetry: bt709
  1620. [ 1162.894203@1] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1621. [ 1162.894246@1] fb: osd current vmode=720p50hz, cmd: 0x10000
  1622. [ 1167.538016@0] aml_snd_card: audio speaker off
  1623. [ 1216.803908@2] Rcv Wcid(1) AddBAReq
  1624. [ 1216.803932@2] Start Seq = 00000000
  1625. [ 1271.495749@3] vfm_map_store:rm default
  1626. [ 1271.495803@3] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
  1627. [ 1271.496962@3] codec:vdec_create instance ffffff8004195000, total 1
  1628. [ 1271.497320@3] codec:no drmmode
  1629. [ 1271.497419@3] codec:Video stbuf alloced at 0000000036800000, size = 10485760
  1630. [ 1271.497443@3] codec:vdec_init, dev_name:amvdec_h264, vdec_type=VDEC_TYPE_SINGLE
  1631. [ 1271.497445@3] codec:vdec_init set vfm decoder ffffff8004195000
  1632. [ 1271.497450@3] codec:vdec_dev_reg.mem[0x0 -- 0x0]
  1633. [ 1271.497515@3] codec:vdec base memory alloced [0000000037200000 -- 000000003a1fffff]
  1634. [ 1271.509867@0] codec:H264 sysinfo: 1920x1080 duration=1600, pts_outside=1,
  1635. [ 1271.509867@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1636. [ 1271.509872@0] aml_spdif_dai: share the same clock
  1637. [ 1271.509881@0] aml_audio_hw: IEC958 PCM32
  1638. [ 1271.509886@0] hdmitx: audio: aout notify rate 44100
  1639. [ 1271.509888@0] hdmitx: audio: aout notify size 32
  1640. [ 1271.509890@0] hdmitx: audio: no update
  1641. [ 1271.509901@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1642. [ 1271.510006@0] aml_snd_card: audio speaker on
  1643. [ 1271.510550@3] codec:vdec_request_irq ffffffc00157ec10, vh264-irq
  1644. [ 1271.510586@3] DI: di_receiver_event_fun: vframe provider reg
  1645. [ 1271.519803@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1646. [ 1271.519808@1] aml_spdif_dai: share the same clock
  1647. [ 1271.519817@1] aml_audio_hw: IEC958 PCM32
  1648. [ 1271.519822@1] hdmitx: audio: aout notify rate 44100
  1649. [ 1271.519824@1] hdmitx: audio: aout notify size 32
  1650. [ 1271.519826@1] hdmitx: audio: no update
  1651. [ 1271.519836@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1652. [ 1271.519965@1] channel count should be 8, we got 2 aborting
  1653. [ 1271.520611@3] set run_early_proc_fun_flag to 1
  1654. [ 1271.520837@3] codec:vdec_init, vf_provider_name =
  1655. [ 1271.521153@1] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
  1656. [ 1271.521159@1] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
  1657. [ 1271.523431@3] codec:video first pts = 0
  1658. [ 1271.523439@3] codec:vdec_request_irq ffffffc001570128, parser
  1659. [ 1271.534314@3] [tsync_avevent]event:1, param 1
  1660. [ 1271.534331@3] video pause!
  1661. [ 1271.534768@3] codec:video_freerun_mode_store(1)
  1662. [ 1271.535000@3] codec:video first checkin pts = 5dc
  1663. [ 1271.535006@3] codec:first check in vpts <0x29:0x5dc> ok!
  1664. [ 1271.535730@0] codec:Enter set parameter cmd1.
  1665. [ 1271.536825@0] codec:vdec1 video changed to 3840 x 2160 60 fps clk->648MHZ
  1666. [ 1271.536842@0] codec:actual_dpb_size 15 max_dpb_size 2
  1667. [ 1271.536928@0] codec:video first pts = 5dc
  1668. [ 1271.577621@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0
  1669. [ 1271.577637@0] DI:7923 disable post.
  1670. [ 1271.640035@2] codec:video_disable_store(0)
  1671. [ 1271.650820@0] codec: detect vout mode change! was 13 now 14
  1672. [ 1271.650827@0] codec: Frame parameters: Size 1920x1080
  1673. [ 1271.650829@0] codec: progressive
  1674. [ 1271.650835@0] codec: (Full type: 0x00009000)
  1675. [ 1271.650840@0] codec: Bit depth: 8-bit, Colour range: limited
  1676. [ 1271.650845@0] codec: Primaries: bt709, Transfer function: bt709, RGB-YCC: bt709
  1677. [ 1271.650848@0] codec: No master display info
  1678. [ 1271.650868@0] vpts to scr, apts = 0x0, vpts = 0x5dc
  1679. [ 1271.650922@0] codec:[video4osd] first picture {1920,1080} pts:5dc,
  1680. [ 1271.670874@0] codec:VsyncEnableVideoLayer
  1681. [ 1271.831489@2] hdmitx: set frac_rate_policy as 0
  1682. [ 1271.831517@2] vout_serve: vmode set to 1080p60hz
  1683. [ 1271.831545@2] vout_serve: disable HDMI PHY as soon as possible
  1684. [ 1271.831553@2] hdmitx: video: vinfo: 720p50hz 50 1
  1685. [ 1271.831559@2] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1686. [ 1271.831564@2] fb: osd current vmode=720p50hz, cmd: 0x50000
  1687. [ 1271.831572@2] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
  1688. [ 1271.831581@2] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
  1689. [ 1271.831594@2] tv_vout: TV mode 1080p60hz selected.
  1690. [ 1271.831599@2]
  1691. [ 1271.831599@2] vdac_enable: on:0,module_sel:8
  1692. [ 1271.831611@2]
  1693. [ 1271.831611@2] vdac_enable: on:0,module_sel:8
  1694. [ 1271.831621@2] tv_vout: new mode =1080p60hz set ok
  1695. [ 1271.831625@2] vout_serve: vinfo mode is: 1080p60hz
  1696. [ 1271.831629@2] vout_serve: new mode 1080p60hz set ok
  1697. [ 1271.831644@2] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 19
  1698. [ 1271.831649@2] hdmitx: stream colourdepth was 8 in para 0x01d72448 (1280x720p50hz)
  1699. [ 1271.831654@2] hdmitx: display colourdepth was 8 in cur_param 0x01d6f6c8 (VIC: 19)
  1700. [ 1271.831658@2] hdmitx: update rx hdr info 0
  1701. [ 1271.831661@2] hdmitx: update physcial size: 480 270
  1702. [ 1271.831675@2] hdmitx: hdev->para now = para at 0x01d72c48
  1703. [ 1271.831681@2] hdmitx: display colourdepth is 10 in cur_param 0x01d6f6c8 (VIC: 19)
  1704. [ 1271.831685@2] Bitdepth is set to 10 bits but display does not support deep colour
  1705. [ 1271.831691@2] hdmitx: Stream colourdepth is 8 in para 0x01d72c48 (1920x1080p60hz - VIC: 16)
  1706. [ 1271.831727@2] hdmitx: video: vinfo: 1080p60hz 60 1
  1707. [ 1271.831732@2] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  1708. [ 1271.831741@2] hdmitx: system: already init VIC = 0 Now VIC = 16
  1709. [ 1271.831745@2] hdmitx: system: params found at 0x01d6f628
  1710. [ 1271.831750@2] hdmitx: system: cur_param = param at 0x01d6f628 colourdepth 8 colourspace 0
  1711. [ 1271.831757@2] hdmitx: video: pixel freq 148500, tmds clock 148500, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  1712. [ 1271.831761@2] hdmitx: rx no SCDC present indicator
  1713. [ 1271.833775@2] hdmitx: ddc rd8b error 0x54 0x01
  1714. [ 1271.835789@2] hdmitx: ddc rd8b error 0x54 0x01
  1715. [ 1271.835797@2] hdmirx version is 1.4 or below
  1716. [ 1271.835801@2] hdmitx div40: 0
  1717. [ 1271.857512@2] hdmitx: system: set pll
  1718. [ 1271.857524@2] hdmitx: system: param->VIC:16
  1719. [ 1271.857534@2] hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
  1720. [ 1271.857542@2] config HPLL = 2970000
  1721. [ 1271.857565@2] HPLL: 0xc800023d
  1722. [ 1271.857569@2] config HPLL done
  1723. [ 1271.857576@2] set_hpll_od3_clk_div[820] div = 6
  1724. [ 1271.857593@2] j = 4 vid_clk_div = 1
  1725. [ 1271.857604@2] hdmitx: set enc for VIC: 16
  1726. [ 1271.857627@2] hdmitx_set_hw[5067] set VIC = 16
  1727. [ 1271.857686@2] Set rgb_ycc to 2
  1728. [ 1271.857859@0] hdmitx: system: irq 80000001
  1729. [ 1271.857886@0] Start = 0x10000100 End = 0x100001ff
  1730. [ 1271.857898@0] [0x10000104]: 0x00000001
  1731. [ 1271.858084@0] [0x10000180]: 0x000000ff
  1732. [ 1271.858089@0] [0x10000181]: 0x000000ff
  1733. [ 1271.858094@0] [0x10000182]: 0x00000003
  1734. [ 1271.858099@0] [0x10000183]: 0x00000007
  1735. [ 1271.858105@0] [0x10000184]: 0x0000003f
  1736. [ 1271.858110@0] [0x10000185]: 0x00000002
  1737. [ 1271.858117@0] [0x10000187]: 0x000000ff
  1738. [ 1271.858122@0] [0x10000188]: 0x00000003
  1739. [ 1271.869483@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  1740. [ 1271.871503@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  1741. [ 1271.873516@2] hdmitx: ddc rd8b error 0x54 0x21
  1742. [ 1271.989507@2] hdmitx: system: PHY Setting Done
  1743. [ 1271.993544@2] Sink is HDMI device
  1744. [ 1271.993594@2] hdmtix: set audio
  1745. [ 1271.993607@2] hdmitx tx_aud_src = 0
  1746. [ 1271.993650@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  1747. [ 1271.993656@2] hdmitx aud_n_para = 6272
  1748. [ 1271.993677@2] hdmitx set channel status
  1749. [ 1271.993739@2] hdmitx: audio: Audio Type: PCM
  1750. [ 1271.993753@2] hdmitx: video: VIC: 16 (16) 1920x1080p60hz
  1751. [ 1271.993765@2] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1752. [ 1271.993772@2] hdmitx: video: Colorimetry: bt709
  1753. [ 1271.993779@2] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1754. [ 1271.993827@2] fb: osd current vmode=1080p60hz, cmd: 0x10000
  1755. [ 1272.373905@0] codec: detect vout mode change! was 14 now 19
  1756. [ 1272.373930@0] codec: Frame parameters: Size 1920x1080
  1757. [ 1272.373938@0] codec: progressive
  1758. [ 1272.373948@0] codec: (Full type: 0x00009000)
  1759. [ 1272.373958@0] codec: Bit depth: 8-bit, Colour range: limited
  1760. [ 1272.373970@0] codec: Primaries: bt709, Transfer function: bt709, RGB-YCC: bt709
  1761. [ 1272.373979@0] codec: No master display info
  1762. [ 1272.374036@0] codec:[video4osd] first picture {1920,1080} pts:bb8,
  1763. [ 1272.390637@0] codec:VsyncEnableVideoLayer
  1764. [ 1272.407280@0] codec:[video4osd] first picture {1920,1080} pts:1194,
  1765. [ 1272.424059@0] codec:VsyncEnableVideoLayer
  1766. [ 1272.634140@0] codec:finished correct frame dur
  1767. [ 1272.634157@0] codec: new=1600,old_duration=1600,cnt=25
  1768. [ 1275.304937@0] codec:invalid h264pts1, reset
  1769. [ 1277.477817@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
  1770. [ 1277.477826@0] di_receiver_event_fun: vf_notify_receiver unreg
  1771. [ 1277.477839@1] DI: di_unreg_process unreg start 1.
  1772. [ 1277.477851@1] codec:DisableVideoLayer()
  1773. [ 1277.477855@1] codec:disbled keep video before free keep buffer.
  1774. [ 1277.477858@1] codec:disbled video for next before free keep buffer!
  1775. [ 1277.477863@1] codec:DisableVideoLayer()
  1776. [ 1277.477868@1] codec:free_alloced_keep_buffer (null). (null). (null)
  1777. [ 1277.477872@1] codec:free_alloced_keep_buffer (null). (null). (null)
  1778. [ 1277.477877@1] [tsync_avevent]event:2, param 0
  1779. [ 1277.477882@1] codec:video first pts = 0
  1780. [ 1277.477893@1] DI: di_unreg_process vf unreg cost 0 ms.
  1781. [ 1277.477897@1] DI: di_unreg_process unreg stop 0.
  1782. [ 1277.488959@0] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
  1783. [ 1277.489263@1] codec:video_disable_store(1)
  1784. [ 1277.489272@1] codec:DisableVideoLayer()
  1785. [ 1277.489278@1] codec:free_alloced_keep_buffer (null). (null). (null)
  1786. [ 1277.489323@1] vfm_map_store:rm default
  1787. [ 1277.489356@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  1788. [ 1277.490568@0] codec:VsyncDisableVideoLayer
  1789. [ 1277.490583@0] codec:AFBC off now.
  1790. [ 1277.835918@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
  1791. [ 1277.835937@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
  1792. [ 1277.836000@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1793. [ 1277.836006@0] aml_spdif_dai: share the same clock
  1794. [ 1277.836016@0] aml_audio_hw: IEC958 PCM32
  1795. [ 1277.836023@0] hdmitx: audio: aout notify rate 44100
  1796. [ 1277.836027@0] hdmitx: audio: aout notify size 32
  1797. [ 1277.836030@0] hdmitx: audio: no update
  1798. [ 1277.836036@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1799. [ 1277.843775@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1800. [ 1277.843789@1] aml_spdif_dai: share the same clock
  1801. [ 1277.843799@1] aml_audio_hw: IEC958 PCM32
  1802. [ 1277.843807@1] hdmitx: audio: aout notify rate 44100
  1803. [ 1277.843810@1] hdmitx: audio: aout notify size 32
  1804. [ 1277.843814@1] hdmitx: audio: no update
  1805. [ 1277.843825@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1806. [ 1277.844030@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1807. [ 1277.844036@1] aml_spdif_dai: share the same clock
  1808. [ 1277.844044@1] aml_audio_hw: IEC958 PCM32
  1809. [ 1277.844048@1] hdmitx: audio: aout notify rate 44100
  1810. [ 1277.844052@1] hdmitx: audio: aout notify size 32
  1811. [ 1277.844055@1] hdmitx: audio: no update
  1812. [ 1277.844061@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1813. [ 1277.844143@1] channel count should be 8, we got 2 aborting
  1814. [ 1278.207888@0] hdmitx: set frac_rate_policy as 0
  1815. [ 1278.207918@0] vout_serve: vmode set to 720p50hz
  1816. [ 1278.207949@0] vout_serve: disable HDMI PHY as soon as possible
  1817. [ 1278.207956@0] hdmitx: video: vinfo: 1080p60hz 60 1
  1818. [ 1278.207962@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  1819. [ 1278.207967@0] fb: osd current vmode=1080p60hz, cmd: 0x50000
  1820. [ 1278.207975@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=14
  1821. [ 1278.207980@0] tv_vout: mode is 14,sync_duration_den=1,sync_duration_num=50
  1822. [ 1278.207994@0] tv_vout: TV mode 720p50hz selected.
  1823. [ 1278.208000@0]
  1824. [ 1278.208000@0] vdac_enable: on:0,module_sel:8
  1825. [ 1278.208012@0]
  1826. [ 1278.208012@0] vdac_enable: on:0,module_sel:8
  1827. [ 1278.208022@0] tv_vout: new mode =720p50hz set ok
  1828. [ 1278.208026@0] vout_serve: vinfo mode is: 720p50hz
  1829. [ 1278.208030@0] vout_serve: new mode 720p50hz set ok
  1830. [ 1278.208046@0] hdmitx: video: auto - get current mode: 720p50hz vmode_e 14
  1831. [ 1278.208051@0] hdmitx: stream colourdepth was 8 in para 0x01d72c48 (1920x1080p60hz)
  1832. [ 1278.208056@0] hdmitx: display colourdepth was 8 in cur_param 0x01d6f628 (VIC: 16)
  1833. [ 1278.208060@0] hdmitx: update rx hdr info 0
  1834. [ 1278.208063@0] hdmitx: update physcial size: 480 270
  1835. [ 1278.208078@0] hdmitx: hdev->para now = para at 0x01d72448
  1836. [ 1278.208083@0] hdmitx: display colourdepth is 10 in cur_param 0x01d6f628 (VIC: 16)
  1837. [ 1278.208087@0] Bitdepth is set to 10 bits but display does not support deep colour
  1838. [ 1278.208093@0] hdmitx: Stream colourdepth is 8 in para 0x01d72448 (1280x720p50hz - VIC: 19)
  1839. [ 1278.208123@0] hdmitx: video: vinfo: 720p50hz 50 1
  1840. [ 1278.208128@0] hdmitx: video: vinfo recalc: 720p50hz 50 1
  1841. [ 1278.208137@0] hdmitx: system: already init VIC = 0 Now VIC = 19
  1842. [ 1278.208141@0] hdmitx: system: params found at 0x01d6f6c8
  1843. [ 1278.208146@0] hdmitx: system: cur_param = param at 0x01d6f6c8 colourdepth 8 colourspace 2
  1844. [ 1278.208152@0] hdmitx: video: pixel freq 74250, tmds clock 74250, MaxClock1 170000, HF_IEEEOUI 0x000000, MaxClock2 0
  1845. [ 1278.208158@0] hdmitx: rx no SCDC present indicator
  1846. [ 1278.210169@0] hdmitx: ddc rd8b error 0x54 0x01
  1847. [ 1278.212181@0] hdmitx: ddc rd8b error 0x54 0x01
  1848. [ 1278.212187@0] hdmirx version is 1.4 or below
  1849. [ 1278.212191@0] hdmitx div40: 0
  1850. [ 1278.237478@0] hdmitx: system: set pll
  1851. [ 1278.237493@0] hdmitx: system: param->VIC:19
  1852. [ 1278.237503@0] hdmitx: 1280x720p50hz doesn't have frac_rate
  1853. [ 1278.237507@0] hdmitx: set clk: VIC = 19 cd = 4 cs = 2 frac_rate = 0
  1854. [ 1278.237513@0] config HPLL = 2970000
  1855. [ 1278.237535@0] HPLL: 0xc800023d
  1856. [ 1278.237538@0] config HPLL done
  1857. [ 1278.237546@0] set_hpll_od3_clk_div[820] div = 6
  1858. [ 1278.237555@0] j = 2 vid_clk_div = 1
  1859. [ 1278.237564@0] hdmitx: set enc for VIC: 19
  1860. [ 1278.237608@0] hdmitx_set_hw[5067] set VIC = 19
  1861. [ 1278.237663@0] Set rgb_ycc to 2
  1862. [ 1278.247683@0] hdmitx: system: irq 80000001
  1863. [ 1278.249475@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1864. [ 1278.249694@0] hdmitx: system: irq 80000001
  1865. [ 1278.251488@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1866. [ 1278.251705@0] hdmitx: system: irq 80000001
  1867. [ 1278.253499@0] hdmitx: ddc rd8b error 0x54 0x21
  1868. [ 1278.254570@0] Start = 0x10000100 End = 0x100001ff
  1869. [ 1278.254584@0] [0x10000104]: 0x00000001
  1870. [ 1278.254770@0] [0x10000180]: 0x000000ff
  1871. [ 1278.254775@0] [0x10000181]: 0x000000ff
  1872. [ 1278.254780@0] [0x10000182]: 0x00000003
  1873. [ 1278.254785@0] [0x10000183]: 0x00000007
  1874. [ 1278.254790@0] [0x10000184]: 0x0000003f
  1875. [ 1278.254795@0] [0x10000185]: 0x00000002
  1876. [ 1278.254802@0] [0x10000187]: 0x000000ff
  1877. [ 1278.254807@0] [0x10000188]: 0x00000003
  1878. [ 1278.369579@0] hdmitx: system: PHY Setting Done
  1879. [ 1278.369651@0] hdmitx: system: irq 80000001
  1880. [ 1278.373657@0] Sink is HDMI device
  1881. [ 1278.373813@0] hdmtix: set audio
  1882. [ 1278.373856@0] hdmitx tx_aud_src = 0
  1883. [ 1278.373953@0] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
  1884. [ 1278.373975@0] hdmitx aud_n_para = 6272
  1885. [ 1278.374042@0] hdmitx set channel status
  1886. [ 1278.374221@0] hdmitx: audio: Audio Type: PCM
  1887. [ 1278.374256@0] hdmitx: video: VIC: 19 (19) 1280x720p50hz
  1888. [ 1278.374297@0] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  1889. [ 1278.374325@0] hdmitx: video: Colorimetry: bt709
  1890. [ 1278.374354@0] hdmitx: video: PLL clock: 0xc800023d, Vid clock div 0x000a339c
  1891. [ 1278.374403@0] Start = 0x10000100 End = 0x100001ff
  1892. [ 1278.374446@0] [0x10000104]: 0x00000001
  1893. [ 1278.375005@0] [0x10000180]: 0x000000ff
  1894. [ 1278.375028@0] [0x10000181]: 0x000000ff
  1895. [ 1278.375051@0] [0x10000182]: 0x00000003
  1896. [ 1278.375074@0] [0x10000183]: 0x00000007
  1897. [ 1278.375097@0] [0x10000184]: 0x0000003f
  1898. [ 1278.375120@0] [0x10000185]: 0x00000002
  1899. [ 1278.375147@0] [0x10000187]: 0x000000ff
  1900. [ 1278.375170@0] [0x10000188]: 0x00000003
  1901. [ 1278.375762@0] fb: osd current vmode=720p50hz, cmd: 0x10000
  1902. [ 1282.847611@1] aml_snd_card: audio speaker off
  1903. [ 1460.389811@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1904. [ 1462.377730@1] libphy: stmmac-0:00 - Link is Up - 100/Full
  1905. [ 1462.377785@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1906. [ 1489.517348@2] unlink cmd rsp urb
  1907. [ 1489.517388@2] urb_enqueue:urb(ffffffc026843240) had been killed
  1908. [ 1489.600544@3] cfg80211: Calling CRDA for country: DE
  1909. [ 1492.215414@0] 1. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
  1910. [ 1492.215629@0] 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
  1911. [ 1492.215762@0] ==>WaitForAsicReady MAC_CSR0=0x76010500
  1912. [ 1492.218282@0] ==>WaitForAsicReady MAC_CSR0=0x76010500
  1913. [ 1492.781805@2] cfg_mode=9
  1914. [ 1492.781831@2] cfg_mode=9
  1915. [ 1492.781847@2] wmode_band_equal(): Band Equal!
  1916. [ 1492.791677@2] 1. Phy Mode = 14
  1917. [ 1492.791692@2] 2. Phy Mode = 14
  1918. [ 1492.801213@2] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xc, should be 9
  1919. [ 1492.820113@2] 3. Phy Mode = 14
  1920. [ 1492.820149@2] AntCfgInit: primary/secondary ant 0/1
  1921. [ 1493.054381@2] MCS Set = ff 00 00 00 01
  1922. [ 1493.064437@2] <==== STA : rt28xx_init, Status=0
  1923. [ 1493.064640@2] NumOfChan ===> 14
  1924. [ 1493.066640@2] 0x1300 = 00064300
  1925. [ 1493.066646@2] RTMPDrvOpen(1):Check if PDMA is idle!
  1926. [ 1493.066770@2] RTMPDrvOpen(2):Check if PDMA is idle!
  1927.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!