API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 29th, 2018
1,054
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 135.14 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.12.29 18:03:11 =~=~=~=~=~=~=~=~=~=~=~=
  2. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  3. TE: 312770
  4.  
  5. BL2 Built : 16:32:58, Nov 3 2017.
  6. gxl gb5491d8 - xiaobo.gu@droid12
  7.  
  8. set vdd cpu_a to 1120 mv
  9. set vdd cpu_b to 1050 mv
  10. set vddee to 1000 mv
  11. Board ID = 10
  12. CPU clk: 1200MHz
  13. DQS-corr enabled
  14. DDR scramble enabled
  15. STICKY_REG0: 0x00000000
  16. STICKY_REG1: 0x00000000
  17. STICKY_REG9: 0x00000000
  18. LPDDR3 chl: Rank0+1 @ 720MHz
  19. DDR0_PUB_CATR0 1 value
  20. DDR0_PUB_CATR0: 0x00141020....
  21. DDR0_PUB_CATR1: 0x0203aaaa....
  22. DDR0_PUB_PGSR0: 0x8000003f....
  23. Rank0: 2048MB(auto)-2T-3
  24. Rank1: 1024MB(auto)-2T-3
  25. DataBus test pass!
  26. AddrBus test pass!
  27. -s
  28. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  29. New fip structure!
  30. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  31. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  32. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066a00
  33. NOTICE: BL3-1: v1.0(release):35dd647
  34. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  35. NOTICE: BL31: BL33 decompress pass
  36. mpu_config_enable:ok
  37.  
  38. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  39.  
  40. OPS=0x82
  41.  
  42. wdt: reset registers!
  43.  
  44. 24 f 34 3e 3e 47 e0 46 6f c0 f1 58 [0.560976 Inits done]
  45.  
  46. secure task start!
  47. high task start!
  48. low task start!
  49. ERROR: Error initializing runtime service opteed_fast
  50.  
  51.  
  52. U-Boot 2015.01-gbc6f877-dirty (Dec 27 2018 - 16:32:41)
  53.  
  54. DRAM: 3 GiB
  55. Relocation Offset is: b6eb5000
  56. register usb cfg[0][1] = 00000000b7f5b060
  57. [CANVAS]canvas init
  58. boot_device_flag : 1
  59. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  60. init bus_cycle=6, bus_timing=7, system=5.0ns
  61. reset failed
  62. get_chip_type and ret:fffffffe
  63. get_chip_type and ret:fffffffe
  64. chip detect failed and ret:fffffffe
  65. nandphy_init failed and ret=0xfffffff1
  66. MMC: aml_priv->desc_buf = 0x00000000b3eb56b0
  67. aml_priv->desc_buf = 0x00000000b3eb79d0
  68. SDIO Port B: 0, SDIO Port C: 1
  69. emmc/sd response timeout, cmd8, status=0x1ff2800
  70. emmc/sd response timeout, cmd55, status=0x1ff2800
  71. init_part() 293: PART_TYPE_AML
  72. [mmc_init] mmc init success
  73. dtb magic 5f4c4d41
  74. Amlogic multi-dtb tool
  75. Multi dtb detected
  76. Multi dtb tool version: v2 .
  77. Support 3 dtbs.
  78. aml_dt soc: gxm platform: q201 variant: 3g
  79. dtb 0 soc: gxm plat: q201 vari: 1g
  80. dtb 1 soc: gxm plat: q201 vari: 2g
  81. dtb 2 soc: gxm plat: q201 vari: 3g
  82. Find match dtb: 2
  83. start dts,buffer=00000000b3eba200,dt_addr=00000000b3ed1a00
  84. Amlogic multi-dtb tool
  85. Multi dtb detected
  86. Multi dtb tool version: v2 .
  87. Support 3 dtbs.
  88. aml_dt soc: gxm platform: q201 variant: 3g
  89. dtb 0 soc: gxm plat: q201 vari: 1g
  90. dtb 1 soc: gxm plat: q201 vari: 2g
  91. dtb 2 soc: gxm plat: q201 vari: 3g
  92. Find match dtb: 2
  93. parts: 10
  94. 00: logo 0000000002000000 1
  95. 01: recovery 0000000002000000 1
  96. 02: rsv 0000000000800000 1
  97. 03: tee 0000000000800000 1
  98. 04: crypt 0000000002000000 1
  99. 05: misc 0000000002000000 1
  100. 06: boot 0000000002000000 1
  101. 07: system 0000000080000000 1
  102. 08: cache 0000000020000000 2
  103. 09: data ffffffffffffffff 4
  104. init_part() 293: PART_TYPE_AML
  105. eMMC/TSD partition table have been checked OK!
  106. check pattern success
  107. mmc env offset: 0x27400000
  108. In: serial
  109. Out: serial
  110. Err: serial
  111. reboot_mode=cold_boot
  112. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  113. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  114. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  115. dtb_read()-1039: total valid 2
  116. dtb_read()-1106: do nothing
  117. Amlogic multi-dtb tool
  118. Multi dtb detected
  119. Multi dtb tool version: v2 .
  120. Support 3 dtbs.
  121. aml_dt soc: gxm platform: q201 variant: 3g
  122. dtb 0 soc: gxm plat: q201 vari: 1g
  123. dtb 1 soc: gxm plat: q201 vari: 2g
  124. dtb 2 soc: gxm plat: q201 vari: 3g
  125. Find match dtb: 2
  126. vpu: clk_level in dts: 7
  127. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  128. vpu: vpu_clk_gate_init_off
  129. vpp: vpp_init
  130. hpd_state=1
  131. [2160p60hz] is invalid for cvbs.
  132. set hdmitx VIC = 97
  133. config HPLL = 3712500
  134. HPLL: 0xc000029a
  135. config HPLL done
  136. j = 6 vid_clk_div = 1
  137. hdmitx: set enc for VIC: 353
  138. HDMITX-DWC addr=0x10004006 rd_data=0x40
  139. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  140. rx version is 2.0 div=40
  141. hdmtix: set audio
  142. hdmitx phy setting done
  143. vpp: vpp_pq_load pq val error !!!
  144. Net: dwmac.c9410000amlkey_init() enter!
  145. [EFUSE_MSG]keynum is 4
  146. [BL31]: tee size: 0
  147.  
  148. card in
  149. init_part() 278: PART_TYPE_DOS
  150. [mmc_init] mmc init success
  151. MMC Device 2 not found
  152. cfgload: no boot.ini or empty file
  153. Start read misc partition datas!
  154. info->attemp_times = 0
  155. info->active_slot = 0
  156. info->slot_info[0].bootable = 1
  157. info->slot_info[0].online = 1
  158. info->slot_info[1].bootable = 0
  159. info->slot_info[1].online = 0
  160. info->attemp_times = 0
  161. attemp_times = 0
  162. active slot = 0
  163. wipe_data=successful
  164. wipe_cache=successful
  165. upgrade_step=2
  166. [OSD]load fb addr from dts
  167. [OSD]fb_addr for logo: 0x7f851000
  168. [OSD]load fb addr from dts
  169. [OSD]fb_addr for logo: 0x7f851000
  170. [CANVAS]addr=0x7f851000 width=3840, height=2160
  171. amlkey_init() enter!
  172. amlkey_init() 71: already init!
  173. [EFUSE_MSG]keynum is 4
  174. [BL31]: tee size: 0
  175. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  176. [KM]Error:f[key_manage_query_size]L507:key[mac] not programed yet
  177. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  178. gpio: pin GPIOAO_2 (gpio 102) value is 1
  179. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
  180. gxm_q201_v1#
  181.  
  182. gxm_q201_v1#
  183.  
  184. gxm_q201_v1#
  185.  
  186. gxm_q201_v1#
  187.  
  188. gxm_q201_v1#
  189.  
  190. gxm_q201_v1#
  191.  
  192. gxm_q201_v1#
  193.  
  194. gxm_q201_v1#
  195.  
  196. gxm_q201_v1#mmcinfo; fatload mmc 0 ${loadaddr} u-boot.bin
  197.  
  198. Device: SDIO Port B
  199. Manufacturer ID: 41
  200. OEM: 3432
  201. Name: SD16G
  202. Tran Speed: 50000000
  203. Rd Block Len: 512
  204. SD version 3.0
  205. High Capacity: Yes
  206. Capacity: 29.3 GiB
  207. mmc clock: 40000000
  208. Bus Width: 4-bit
  209. reading u-boot.bin
  210. 753664 bytes read in 46 ms (15.6 MiB/s)
  211. gxm_q201_v1#store rom_write ${loadaddr} 0 100000
  212.  
  213. mmc switch to boot0 success
  214. mmc switch to boot1 success
  215. mmc switch to user success
  216. gxm_q201_v1#reset
  217.  
  218. resetting ...
  219. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  220. TE: 39323
  221.  
  222. BL2 Built : 16:32:58, Nov 3 2017.
  223. gxl gb5491d8 - xiaobo.gu@droid12
  224.  
  225. set vdd cpu_a to 1120 mv
  226. set vdd cpu_b to 1050 mv
  227. set vddee to 1000 mv
  228. Board ID = 10
  229. CPU clk: 1200MHz
  230. DQS-corr enabled
  231. DDR scramble enabled
  232. STICKY_REG0: 0x00000000
  233. STICKY_REG1: 0x00000000
  234. STICKY_REG9: 0x00000000
  235. LPDDR3 chl: Rank0+1 @ 720MHz
  236. DDR0_PUB_CATR0 1 value
  237. DDR0_PUB_CATR0: 0x00141020....
  238. DDR0_PUB_CATR1: 0x0203aaaa....
  239. DDR0_PUB_PGSR0: 0x8000003f....
  240. Rank0: 2048MB(auto)-2T-3
  241. Rank1: 1024MB(auto)-2T-3
  242. DataBus test pass!
  243. AddrBus test pass!
  244. -s
  245. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  246. New fip structure!
  247. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  248. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  249. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066a00
  250. NOTICE: BL3-1: v1.0(release):35dd647
  251. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  252. NOTICE: BL31: BL33 decompress pass
  253. mpu_config_enable:ok
  254.  
  255. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  256.  
  257. OPS=0x82
  258.  
  259. wdt: reset registers!
  260.  
  261. 24 f 34 3e 3e 47 e0 46 6f c0 f1 58 [0.287556 Inits done]
  262.  
  263. secure task start!
  264. high task start!
  265. low task start!
  266. ERROR: Error initializing runtime service opteed_fast
  267.  
  268.  
  269. U-Boot 2015.01-gbc6f877-dirty (Dec 28 2018 - 21:08:51)
  270.  
  271. DRAM: 3 GiB
  272. Relocation Offset is: b6eb5000
  273. register usb cfg[0][1] = 00000000b7f5b060
  274. [CANVAS]canvas init
  275. boot_device_flag : 1
  276. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  277. init bus_cycle=6, bus_timing=7, system=5.0ns
  278. reset failed
  279. get_chip_type and ret:fffffffe
  280. get_chip_type and ret:fffffffe
  281. chip detect failed and ret:fffffffe
  282. nandphy_init failed and ret=0xfffffff1
  283. MMC: aml_priv->desc_buf = 0x00000000b3eb56b0
  284. aml_priv->desc_buf = 0x00000000b3eb79d0
  285. SDIO Port B: 0, SDIO Port C: 1
  286. emmc/sd response timeout, cmd8, status=0x1ff2800
  287. emmc/sd response timeout, cmd55, status=0x1ff2800
  288. init_part() 293: PART_TYPE_AML
  289. [mmc_init] mmc init success
  290. dtb magic 5f4c4d41
  291. Amlogic multi-dtb tool
  292. Multi dtb detected
  293. Multi dtb tool version: v2 .
  294. Support 3 dtbs.
  295. aml_dt soc: gxm platform: q201 variant: 3g
  296. dtb 0 soc: gxm plat: q201 vari: 1g
  297. dtb 1 soc: gxm plat: q201 vari: 2g
  298. dtb 2 soc: gxm plat: q201 vari: 3g
  299. Find match dtb: 2
  300. start dts,buffer=00000000b3eba200,dt_addr=00000000b3ed1a00
  301. Amlogic multi-dtb tool
  302. Multi dtb detected
  303. Multi dtb tool version: v2 .
  304. Support 3 dtbs.
  305. aml_dt soc: gxm platform: q201 variant: 3g
  306. dtb 0 soc: gxm plat: q201 vari: 1g
  307. dtb 1 soc: gxm plat: q201 vari: 2g
  308. dtb 2 soc: gxm plat: q201 vari: 3g
  309. Find match dtb: 2
  310. parts: 10
  311. 00: logo 0000000002000000 1
  312. 01: recovery 0000000002000000 1
  313. 02: rsv 0000000000800000 1
  314. 03: tee 0000000000800000 1
  315. 04: crypt 0000000002000000 1
  316. 05: misc 0000000002000000 1
  317. 06: boot 0000000002000000 1
  318. 07: system 0000000080000000 1
  319. 08: cache 0000000020000000 2
  320. 09: data ffffffffffffffff 4
  321. init_part() 293: PART_TYPE_AML
  322. eMMC/TSD partition table have been checked OK!
  323. check pattern success
  324. mmc env offset: 0x27400000
  325. In: serial
  326. Out: serial
  327. Err: serial
  328. reboot_mode=watchdog_reboot
  329. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  330. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  331. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  332. dtb_read()-1039: total valid 2
  333. dtb_read()-1106: do nothing
  334. Amlogic multi-dtb tool
  335. Multi dtb detected
  336. Multi dtb tool version: v2 .
  337. Support 3 dtbs.
  338. aml_dt soc: gxm platform: q201 variant: 3g
  339. dtb 0 soc: gxm plat: q201 vari: 1g
  340. dtb 1 soc: gxm plat: q201 vari: 2g
  341. dtb 2 soc: gxm plat: q201 vari: 3g
  342. Find match dtb: 2
  343. vpu: clk_level in dts: 7
  344. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  345. vpu: vpu_clk_gate_init_off
  346. vpp: vpp_init
  347. hpd_state=1
  348. [2160p60hz] is invalid for cvbs.
  349. set hdmitx VIC = 97
  350. config HPLL = 3712500
  351. HPLL: 0xc000029a
  352. config HPLL done
  353. j = 6 vid_clk_div = 1
  354. hdmitx: set enc for VIC: 353
  355. HDMITX-DWC addr=0x10004006 rd_data=0x40
  356. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  357. rx version is 2.0 div=40
  358. hdmtix: set audio
  359. hdmitx phy setting done
  360. vpp: vpp_pq_load pq val error !!!
  361. Net: dwmac.c9410000amlkey_init() enter!
  362. [EFUSE_MSG]keynum is 4
  363. [BL31]: tee size: 0
  364.  
  365. card in
  366. init_part() 278: PART_TYPE_DOS
  367. [mmc_init] mmc init success
  368. MMC Device 2 not found
  369. cfgload: no boot.ini or empty file
  370. Start read misc partition datas!
  371. info->attemp_times = 0
  372. info->active_slot = 0
  373. info->slot_info[0].bootable = 1
  374. info->slot_info[0].online = 1
  375. info->slot_info[1].bootable = 0
  376. info->slot_info[1].online = 0
  377. info->attemp_times = 0
  378. attemp_times = 0
  379. active slot = 0
  380. wipe_data=successful
  381. wipe_cache=successful
  382. upgrade_step=2
  383. [OSD]load fb addr from dts
  384. [OSD]fb_addr for logo: 0x7f851000
  385. [OSD]load fb addr from dts
  386. [OSD]fb_addr for logo: 0x7f851000
  387. [CANVAS]addr=0x7f851000 width=3840, height=2160
  388. amlkey_init() enter!
  389. amlkey_init() 71: already init!
  390. [EFUSE_MSG]keynum is 4
  391. [BL31]: tee size: 0
  392. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  393. [KM]Error:f[key_manage_query_size]L507:key[mac] not programed yet
  394. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  395. gpio: pin GPIOAO_2 (gpio 102) value is 1
  396. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
  397. gxm_q201_v1#
  398.  
  399. gxm_q201_v1#
  400.  
  401. gxm_q201_v1#
  402.  
  403. gxm_q201_v1#
  404.  
  405. gxm_q201_v1#
  406.  
  407. gxm_q201_v1#
  408.  
  409. gxm_q201_v1#
  410.  
  411. gxm_q201_v1#
  412.  
  413. gxm_q201_v1#
  414.  
  415. gxm_q201_v1#
  416.  
  417. gxm_q201_v1#
  418.  
  419. gxm_q201_v1#
  420.  
  421. gxm_q201_v1#
  422.  
  423. gxm_q201_v1#run update
  424.  
  425. InUsbBurn
  426. noSof
  427. Device: SDIO Port B
  428. Manufacturer ID: 41
  429. OEM: 3432
  430. Name: SD16G
  431. Tran Speed: 50000000
  432. Rd Block Len: 512
  433. SD version 3.0
  434. High Capacity: Yes
  435. Capacity: 29.3 GiB
  436. mmc clock: 40000000
  437. Bus Width: 4-bit
  438. [MSG]Reload bmps env.
  439. Err imgread(L587):Logo header err.
  440. [MSG]ini sz 0x256B
  441. [fat]Filesize is 0x256B[0M]
  442. [fat]0x:leftSz 256 < BPS 4000, gotSz 256
  443.  
  444. =========sdc_burn_paras=====>>>
  445. [common]
  446. erase_bootloader = 1
  447. erase_flash = 4
  448. reboot = 0x0
  449. key_overwrite = 0x0
  450.  
  451. [burn_ex]
  452. package = aml_upgrade_package.img
  453. media =
  454.  
  455. [burn_parts]
  456. burn_num = 0
  457.  
  458. <<<<=====sdc_burn_paras======
  459.  
  460. [MSG]To erase OLD bootloader !
  461. emmckey_is_protected : protect
  462. start = 0,end = 8191
  463. mmc switch to boot0 success
  464. emmckey_is_protected : protect
  465. blkcnt = 8192
  466. start = 0,end = 8191
  467. mmc switch to boot1 success
  468. emmckey_is_protected : protect
  469. blkcnt = 8192
  470. start = 0,end = 8191
  471. mmc switch to user success
  472. [MSG]Reset to load NEW uboot from ext-mmc!
  473. reboot mode: <NULL>
  474. Can not find match reboot mode, use normal by default
  475. bl31 reboot reason: 0xd
  476. bl31 reboot reason: 0x1
  477. system cmd 1.
  478.  
  479. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;0.0;CHK:0;
  480. no sdio debug board detected
  481. TE: 117656
  482.  
  483. BL2 Built : 16:32:58, Nov 3 2017.
  484. gxl gb5491d8 - xiaobo.gu@droid12
  485.  
  486. set vdd cpu_a to 1120 mv
  487. set vdd cpu_b to 1050 mv
  488. set vddee to 1000 mv
  489. Board ID = 10
  490. CPU clk: 1200MHz
  491. DQS-corr enabled
  492. DDR scramble enabled
  493. STICKY_REG0: 0x00000000
  494. STICKY_REG1: 0x00000000
  495. STICKY_REG9: 0x00000000
  496. LPDDR3 chl: Rank0+1 @ 720MHz
  497. DDR0_PUB_CATR0 1 value
  498. DDR0_PUB_CATR0: 0x00141020....
  499. DDR0_PUB_CATR1: 0x0203aaaa....
  500. DDR0_PUB_PGSR0: 0x8000003f....
  501. Rank0: 2048MB(auto)-2T-3
  502. Rank1: 1024MB(auto)-2T-3
  503. DataBus test pass!
  504. AddrBus test pass!
  505. Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  506. New fip structure!
  507. Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  508. Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  509. Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066a00
  510. NOTICE: BL3-1: v1.0(release):35dd647
  511. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  512. NOTICE: BL31: BL33 decompress pass
  513. mpu_config_enable:ok
  514.  
  515. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  516.  
  517. OPS=0x82
  518.  
  519. wdt: reset registers!
  520.  
  521. 24 f 34 3e 3e 47 e0 46 6f c0 f1 58 [0.485962 Inits done]
  522.  
  523. secure task start!
  524. high task start!
  525. low task start!
  526. ERROR: Error initializing runtime service opteed_fast
  527.  
  528.  
  529. U-Boot 2015.01-gbc6f877-dirty (Dec 27 2018 - 16:32:41)
  530.  
  531. DRAM: 3 GiB
  532. Relocation Offset is: b6eb5000
  533. register usb cfg[0][1] = 00000000b7f5b060
  534. [CANVAS]canvas init
  535. boot_device_flag : 1
  536. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  537. init bus_cycle=6, bus_timing=7, system=5.0ns
  538. reset failed
  539. get_chip_type and ret:fffffffe
  540. get_chip_type and ret:fffffffe
  541. chip detect failed and ret:fffffffe
  542. nandphy_init failed and ret=0xfffffff1
  543. MMC: aml_priv->desc_buf = 0x00000000b3eb56b0
  544. aml_priv->desc_buf = 0x00000000b3eb79d0
  545. SDIO Port B: 0, SDIO Port C: 1
  546. emmc/sd response timeout, cmd8, status=0x1ff2800
  547. emmc/sd response timeout, cmd55, status=0x1ff2800
  548. init_part() 293: PART_TYPE_AML
  549. [mmc_init] mmc init success
  550. dtb magic 5f4c4d41
  551. Amlogic multi-dtb tool
  552. Multi dtb detected
  553. Multi dtb tool version: v2 .
  554. Support 3 dtbs.
  555. aml_dt soc: gxm platform: q201 variant: 3g
  556. dtb 0 soc: gxm plat: q201 vari: 1g
  557. dtb 1 soc: gxm plat: q201 vari: 2g
  558. dtb 2 soc: gxm plat: q201 vari: 3g
  559. Find match dtb: 2
  560. start dts,buffer=00000000b3eba200,dt_addr=00000000b3ed1a00
  561. Amlogic multi-dtb tool
  562. Multi dtb detected
  563. Multi dtb tool version: v2 .
  564. Support 3 dtbs.
  565. aml_dt soc: gxm platform: q201 variant: 3g
  566. dtb 0 soc: gxm plat: q201 vari: 1g
  567. dtb 1 soc: gxm plat: q201 vari: 2g
  568. dtb 2 soc: gxm plat: q201 vari: 3g
  569. Find match dtb: 2
  570. parts: 10
  571. 00: logo 0000000002000000 1
  572. 01: recovery 0000000002000000 1
  573. 02: rsv 0000000000800000 1
  574. 03: tee 0000000000800000 1
  575. 04: crypt 0000000002000000 1
  576. 05: misc 0000000002000000 1
  577. 06: boot 0000000002000000 1
  578. 07: system 0000000080000000 1
  579. 08: cache 0000000020000000 2
  580. 09: data ffffffffffffffff 4
  581. init_part() 293: PART_TYPE_AML
  582. eMMC/TSD partition table have been checked OK!
  583. check pattern success
  584. mmc env offset: 0x27400000
  585. In: serial
  586. Out: serial
  587. Err: serial
  588. reboot_mode=normal
  589. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  590. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  591. _verify_dtb_checksum()-917: calc bb800d38, store bb800d38
  592. dtb_read()-1039: total valid 2
  593. dtb_read()-1106: do nothing
  594. Amlogic multi-dtb tool
  595. Multi dtb detected
  596. Multi dtb tool version: v2 .
  597. Support 3 dtbs.
  598. aml_dt soc: gxm platform: q201 variant: 3g
  599. dtb 0 soc: gxm plat: q201 vari: 1g
  600. dtb 1 soc: gxm plat: q201 vari: 2g
  601. dtb 2 soc: gxm plat: q201 vari: 3g
  602. Find match dtb: 2
  603. vpu: clk_level in dts: 7
  604. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  605. vpu: vpu_clk_gate_init_off
  606. vpp: vpp_init
  607. hpd_state=1
  608. [2160p60hz] is invalid for cvbs.
  609. set hdmitx VIC = 97
  610. config HPLL = 3712500
  611. HPLL: 0xc000029a
  612. config HPLL done
  613. j = 6 vid_clk_div = 1
  614. hdmitx: set enc for VIC: 353
  615. HDMITX-DWC addr=0x10004006 rd_data=0x40
  616. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  617. rx version is 2.0 div=40
  618. hdmtix: set audio
  619. hdmitx phy setting done
  620. card in
  621. init_part() 278: PART_TYPE_DOS
  622. [mmc_init] mmc init success
  623. Device: SDIO Port B
  624. Manufacturer ID: 41
  625. OEM: 3432
  626. Name: SD16G
  627. Tran Speed: 25000000
  628. Rd Block Len: 512
  629. SD version 3.0
  630. High Capacity: Yes
  631. Capacity: 29.3 GiB
  632. mmc clock: 25000000
  633. Bus Width: 4-bit
  634. [MSG]ini sz 0x256B
  635. [fat]Filesize is 0x256B[0M]
  636. [fat]0x:leftSz 256 < BPS 4000, gotSz 256
  637.  
  638. =========sdc_burn_paras=====>>>
  639. [common]
  640. erase_bootloader = 1
  641. erase_flash = 4
  642. reboot = 0x0
  643. key_overwrite = 0x0
  644.  
  645. [burn_ex]
  646. package = aml_upgrade_package.img
  647. media =
  648.  
  649. [burn_parts]
  650. burn_num = 0
  651.  
  652. <<<<=====sdc_burn_paras======
  653.  
  654. [fat]Filesize is 0x41793dd8B[1047M]
  655. [fat]0x:leftSz 2c40 < BPS 4000, gotSz 6c40
  656. [MSG]image version [0x00000002]
  657. [MSG]cfg10=0xADFC318C
  658. [fat]Seek 0xba8c0 from 0x6c40
  659. [MSG]itemSizeNotAligned 0x1740
  660. [MSG]align 4 mmc read... [fat]0x:leftSz 18c0 < BPS 4000, gotSz 23000
  661. [MSG]Down(mem) part(dtb) sz(0x23000) fmt(normal)
  662. [MSG]Burn Start...
  663. [MSG]load dt.img to 0x0000000001000000, sz=0x23000
  664. [MSG]Burn complete
  665. [MSG]echo video prepare for upgrade
  666. hpd_state=1
  667. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  668. [OSD]fb_addr for logo: 0x3d800000
  669. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  670. [OSD]fb_addr for logo: 0x3d800000
  671. [CANVAS]addr=0x3d800000 width=3840, height=2160
  672. [2160p60hz] is invalid for cvbs.
  673. set hdmitx VIC = 97
  674. config HPLL = 3712500
  675. HPLL: 0xc000029a
  676. config HPLL done
  677. j = 6 vid_clk_div = 1
  678. hdmitx: set enc for VIC: 353
  679. rx version is 2.0 div=40
  680. hdmtix: set audio
  681. hdmitx phy setting done
  682. [MSG]dw,dh[1920, 1080]
  683. [MSG]w,h[4,14]
  684. [MSG]Exit before re-init
  685. command: store exit
  686. dtb magic 5f4c4d41
  687. Amlogic multi-dtb tool
  688. Multi dtb detected
  689. Multi dtb tool version: v2 .
  690. Support 3 dtbs.
  691. aml_dt soc: gxm platform: q201 variant: 3g
  692. dtb 0 soc: gxm plat: q201 vari: 1g
  693. dtb 1 soc: gxm plat: q201 vari: 2g
  694. dtb 2 soc: gxm plat: q201 vari: 3g
  695. Find match dtb: 2
  696. start dts,buffer=0000000001000000,dt_addr=0000000001017800
  697. Amlogic multi-dtb tool
  698. Multi dtb detected
  699. Multi dtb tool version: v2 .
  700. Support 3 dtbs.
  701. aml_dt soc: gxm platform: q201 variant: 3g
  702. dtb 0 soc: gxm plat: q201 vari: 1g
  703. dtb 1 soc: gxm plat: q201 vari: 2g
  704. dtb 2 soc: gxm plat: q201 vari: 3g
  705. Find match dtb: 2
  706. parts: 10
  707. 00: logo 0000000002000000 1
  708. 01: recovery 0000000002000000 1
  709. 02: rsv 0000000000800000 1
  710. 03: tee 0000000000800000 1
  711. 04: crypt 0000000002000000 1
  712. 05: misc 0000000002000000 1
  713. 06: boot 0000000002000000 1
  714. 07: system 0000000080000000 1
  715. 08: cache 0000000020000000 2
  716. 09: data ffffffffffffffff 4
  717. [MSG]run cmd [store disprotect key; store disprotect hynix]
  718. [store]disprotect key
  719. disprotect hynix
  720. emmc/sd response timeout, cmd8, status=0x1ff2800
  721. emmc/sd response timeout, cmd55, status=0x1ff2800
  722. init_part() 293: PART_TYPE_AML
  723. [mmc_init] mmc init success
  724. switch to partitions #0, OK
  725. mmc1(part 0) is current device
  726. Device: SDIO Port C
  727. Manufacturer ID: 90
  728. OEM: 14a
  729. Name: HBG4a
  730. Tran Speed: 52000000
  731. Rd Block Len: 512
  732. MMC version 5.1
  733. High Capacity: Yes
  734. Capacity: 29.1 GiB
  735. mmc clock: 40000000
  736. Bus Width: 8-bit
  737. [store]amlmmc key
  738. emmc disprotect key
  739. [store]amlmmc erase 1emmckey_is_protected : disprotect
  740. blkcnt = 61071360
  741. start = 0,end = 61071359
  742. Amlogic multi-dtb tool
  743. Multi dtb detected
  744. Multi dtb tool version: v2 .
  745. Support 3 dtbs.
  746. aml_dt soc: gxm platform: q201 variant: 3g
  747. dtb 0 soc: gxm plat: q201 vari: 1g
  748. dtb 1 soc: gxm plat: q201 vari: 2g
  749. dtb 2 soc: gxm plat: q201 vari: 3g
  750. Find match dtb: 2
  751. [burn_parts]
  752. burn_num = 5
  753. burn_part0 = _aml_dtb
  754. burn_part1 = boot
  755. burn_part2 = logo
  756. burn_part3 = recovery
  757. burn_part4 = system
  758.  
  759.  
  760. [MSG]=====>To burn part [_aml_dtb]
  761. [MSG]itemSizeNotAligned 0x1740
  762. [MSG]Down(store) part(_aml_dtb) sz(0x23000) fmt(normal)
  763. [MSG]totalSlotNum = 0, nextWriteBackSlot 3
  764. [MSG]itemSizeNotAligned 0x1740
  765. [fat]0x:leftSz 18c0 < BPS 4000, gotSz 18c0
  766. [MSG]Burn Start...
  767. [MSG]optimus_download_dtb_image:dataSzReceived=0x23000
  768. start erase dtb......
  769. start = 81920,end = 82943
  770. dev # 1, , several blocks erased OK
  771. [store]To run cmd[emmc dtb_write 0x00000000076fe8c0 0x40000]
  772. dtb_write()-1140: valid 2
  773. dtb_write()-1160: new stamp 22, checksum 0x4305b779, version 1, magic A~D
  774. dtb magic 5f4c4d41
  775. Amlogic multi-dtb tool
  776. Multi dtb detected
  777. Multi dtb tool version: v2 .
  778. Support 3 dtbs.
  779. aml_dt soc: gxm platform: q201 variant: 3g
  780. dtb 0 soc: gxm plat: q201 vari: 1g
  781. dtb 1 soc: gxm plat: q201 vari: 2g
  782. dtb 2 soc: gxm plat: q201 vari: 3g
  783. Find match dtb: 2
  784. start dts,buffer=00000000076fe8c0,dt_addr=00000000077160c0
  785. dtb magic 5f4c4d41
  786. Amlogic multi-dtb tool
  787. Multi dtb detected
  788. Multi dtb tool version: v2 .
  789. Support 3 dtbs.
  790. aml_dt soc: gxm platform: q201 variant: 3g
  791. dtb 0 soc: gxm plat: q201 vari: 1g
  792. dtb 1 soc: gxm plat: q201 vari: 2g
  793. dtb 2 soc: gxm plat: q201 vari: 3g
  794. Find match dtb: 2
  795. start dts,buffer=00000000076fe8c0,dt_addr=00000000077160c0
  796. Amlogic multi-dtb tool
  797. Multi dtb detected
  798. Multi dtb tool version: v2 .
  799. Support 3 dtbs.
  800. aml_dt soc: gxm platform: q201 variant: 3g
  801. dtb 0 soc: gxm plat: q201 vari: 1g
  802. dtb 1 soc: gxm plat: q201 vari: 2g
  803. dtb 2 soc: gxm plat: q201 vari: 3g
  804. Find match dtb: 2
  805. parts: 10
  806. 00: logo 0000000002000000 1
  807. 01: recovery 0000000002000000 1
  808. 02: rsv 0000000000800000 1
  809. 03: tee 0000000000800000 1
  810. 04: crypt 0000000002000000 1
  811. 05: misc 0000000002000000 1
  812. 06: boot 0000000002000000 1
  813. 07: system 0000000080000000 1
  814. 08: cache 0000000020000000 2
  815. 09: data ffffffffffffffff 4
  816. get_ptbl_rsv()-483: magic faild MPT,
  817. mmc_device_init()-1115: update rsv with dtb!
  818. init_part() 293: PART_TYPE_AML
  819. partition table success
  820. [MSG]Burn complete
  821. [store]To run cmd[emmc dtb_read 0x0000000007700000 0x40000]
  822. dtb_read_shortcut()-975: short cut in...
  823. [MSG]VERIFY OK
  824.  
  825. [MSG]=====>To burn part [boot]
  826. [fat]Seek 0x195d4c from 0xdd8f0
  827. [MSG]itemSizeNotAligned 0x22b4
  828. [MSG]flash LOGIC partCap 0x2000000B
  829. [MSG]Down(store) part(boot) sz(0x8a8000) fmt(normal)
  830. [MSG]totalSlotNum = 0, nextWriteBackSlot 139
  831. [MSG]itemSizeNotAligned 0x22b4
  832. Downloading %46
  833. Downloading %92
  834. [fat]0x:leftSz 1d4c < BPS 4000, gotSz 5d4c
  835. [MSG]Burn Start...
  836. [MSG]Burn complete
  837. [MSG]Verify Start...
  838. [MSG]To verify part boot in fmt normal
  839. [MSG]Verify End
  840. [MSG]VERIFY OK
  841.  
  842. [MSG]=====>To burn part [logo]
  843. [fat]Seek 0xaf5dac from 0xa3dd7c
  844. [MSG]itemSizeNotAligned 0x2254
  845. [MSG]flash LOGIC partCap 0x2000000B
  846. [MSG]Down(store) part(logo) sz(0x4d0940) fmt(normal)
  847. [MSG]totalSlotNum = 0, nextWriteBackSlot 77
  848. [MSG]itemSizeNotAligned 0x2254
  849. Downloading %83
  850. [fat]0x:leftSz 26ec < BPS 4000, gotSz e6ec
  851. [MSG]Burn Start...
  852. [MSG]Burn complete
  853. [MSG]Verify Start...
  854. [MSG]To verify part logo in fmt normal
  855. [MSG]Verify End
  856. [MSG]VERIFY OK
  857.  
  858. [MSG]=====>To burn part [recovery]
  859. [MSG]itemSizeNotAligned 0x1818
  860. [MSG]flash LOGIC partCap 0x2000000B
  861. [MSG]Down(store) part(recovery) sz(0xdc6000) fmt(normal)
  862. [MSG]totalSlotNum = 0, nextWriteBackSlot 221
  863. [MSG]itemSizeNotAligned 0x1818
  864. Downloading %29
  865. Downloading %58
  866. Downloading %87
  867. [fat]0x:leftSz 7e8 < BPS 4000, gotSz 47e8
  868. [MSG]Burn Start...
  869. [MSG]Burn complete
  870. [MSG]Verify Start...
  871. [MSG]To verify part recovery in fmt normal
  872. [MSG]Verify End
  873. [MSG]VERIFY OK
  874.  
  875. [MSG]=====>To burn part [system]
  876. [MSG]itemSizeNotAligned 0x37e8
  877. [MSG]flash LOGIC partCap 0x80000000B
  878. [MSG]Down(store) part(system) sz(0x3fa07590) fmt(sparse)
  879. [MSG]totalSlotNum = 0, nextWriteBackSlot 1024
  880. [MSG]itemSizeNotAligned 0x37e8
  881. Downloading %1
  882. Downloading %2
  883. Downloading %3
  884. Downloading %4
  885. Downloading %5
  886. Downloading %6
  887. [MSG]Burn Start...
  888. [MSG]CHUNK_TYPE_FILL
  889. Downloading %7
  890. Downloading %8
  891. Downloading %9
  892. Downloading %10
  893. Downloading %11
  894. Downloading %12
  895. Downloading %13
  896. Downloading %14
  897. Downloading %15
  898. Downloading %16
  899. Downloading %17
  900. Downloading %18
  901. Downloading %19
  902. Downloading %20
  903. Downloading %21
  904. Downloading %22
  905. Downloading %23
  906. Downloading %24
  907. Downloading %25
  908. Downloading %26
  909. Downloading %27
  910. Downloading %28
  911. Downloading %29
  912. Downloading %30
  913. Downloading %31
  914. Downloading %32
  915. Downloading %33
  916. Downloading %34
  917. Downloading %35
  918. Downloading %36
  919. Downloading %37
  920. Downloading %38
  921. Downloading %39
  922. Downloading %40
  923. Downloading %41
  924. Downloading %42
  925. Downloading %43
  926. Downloading %44
  927. Downloading %45
  928. Downloading %46
  929. Downloading %47
  930. Downloading %48
  931. Downloading %49
  932. Downloading %50
  933. Downloading %51
  934. Downloading %52
  935. Downloading %53
  936. Downloading %54
  937. Downloading %55
  938. Downloading %56
  939. Downloading %57
  940. Downloading %58
  941. Downloading %59
  942. Downloading %60
  943. Downloading %61
  944. Downloading %62
  945. Downloading %63
  946. Downloading %64
  947. Downloading %65
  948. Downloading %66
  949. Downloading %67
  950. Downloading %68
  951. Downloading %69
  952. Downloading %70
  953. Downloading %71
  954. Downloading %72
  955. Downloading %73
  956. Downloading %74
  957. Downloading %75
  958. Downloading %76
  959. Downloading %77
  960. Downloading %78
  961. Downloading %79
  962. Downloading %80
  963. Downloading %81
  964. Downloading %82
  965. Downloading %83
  966. Downloading %84
  967. Downloading %85
  968. Downloading %86
  969. Downloading %87
  970. Downloading %88
  971. Downloading %89
  972. Downloading %90
  973. Downloading %91
  974. Downloading %92
  975. Downloading %93
  976. Downloading %94
  977. Downloading %95
  978. Downloading %96
  979. Downloading %97
  980. Downloading %98
  981. Downloading %99
  982. [fat]0x:leftSz 3da8 < BPS 4000, gotSz 3da8
  983. [MSG]Burn complete
  984. Downloading %100
  985.  
  986. [MSG]Verify Start...
  987. [MSG]To verify part system in fmt sparse
  988. [MSG]Verify End
  989. [MSG]VERIFY OK
  990.  
  991. [MSG]=====>To burn part [bootloader]
  992. [MSG]itemSizeNotAligned 0x2284
  993. [MSG]Down(store) part(bootloader) sz(0xb8000) fmt(normal)
  994. [MSG]totalSlotNum = 0, nextWriteBackSlot 12
  995. [MSG]itemSizeNotAligned 0x2284
  996. [fat]0x:leftSz 1d7c < BPS 4000, gotSz 5d7c
  997. [MSG]Burn Start...
  998. mmc switch to boot0 success
  999. mmc switch to boot1 success
  1000. mmc switch to user success
  1001. [MSG]Burn complete
  1002. mmc switch to boot0 success
  1003. mmc switch to boot1 success
  1004. mmc switch to user success
  1005. [MSG]VERIFY OK
  1006. ## save_setting ##
  1007. [MSG]Set upgrade_step to 2
  1008. Saving Environment to aml-storage...
  1009. mmc env offset: 0x27400000
  1010. Writing to MMC(1)... done
  1011. [MSG]to close image
  1012. [MSG]Reload bmps env.
  1013. [MSG]======sdc burn SUCCESS.
  1014. [MSG]stop here as poweroff and powerkey not supported in platform!
  1015. [MSG]You can <Ctrl-c> to reboot
  1016. reboot mode: normal
  1017. bl31 reboot reason: 0xd
  1018. bl31 reboot reason: 0x1
  1019. system cmd 1.
  1020.  
  1021. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  1022. TE: 38696
  1023.  
  1024. BL2 Built : 16:32:58, Nov 3 2017.
  1025. gxl gb5491d8 - xiaobo.gu@droid12
  1026.  
  1027. set vdd cpu_a to 1120 mv
  1028. set vdd cpu_b to 1050 mv
  1029. set vddee to 1000 mv
  1030. Board ID = 10
  1031. CPU clk: 1200MHz
  1032. DQS-corr enabled
  1033. DDR scramble enabled
  1034. STICKY_REG0: 0x00000000
  1035. STICKY_REG1: 0x00000000
  1036. STICKY_REG9: 0x00000000
  1037. LPDDR3 chl: Rank0+1 @ 720MHz
  1038. DDR0_PUB_CATR0 1 value
  1039. DDR0_PUB_CATR0: 0x00141020....
  1040. DDR0_PUB_CATR1: 0x0203aaaa....
  1041. DDR0_PUB_PGSR0: 0x8000003f....
  1042. Rank0: 2048MB(auto)-2T-3
  1043. Rank1: 1024MB(auto)-2T-3
  1044. DataBus test pass!
  1045. AddrBus test pass!
  1046. -s
  1047. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  1048. New fip structure!
  1049. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  1050. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  1051. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066a00
  1052. NOTICE: BL3-1: v1.0(release):35dd647
  1053. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  1054. NOTICE: BL31: BL33 decompress pass
  1055. mpu_config_enable:ok
  1056.  
  1057. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  1058.  
  1059. OPS=0x82
  1060.  
  1061. wdt: reset registers!
  1062.  
  1063. 24 f 34 3e 3e 47 e0 46 6f c0 f1 58 [0.287031 Inits done]
  1064.  
  1065. secure task start!
  1066. high task start!
  1067. low task start!
  1068. ERROR: Error initializing runtime service opteed_fast
  1069.  
  1070.  
  1071. U-Boot 2015.01-gbc6f877-dirty (Dec 27 2018 - 16:32:41)
  1072.  
  1073. DRAM: 3 GiB
  1074. Relocation Offset is: b6eb5000
  1075. register usb cfg[0][1] = 00000000b7f5b060
  1076. [CANVAS]canvas init
  1077. boot_device_flag : 1
  1078. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  1079. init bus_cycle=6, bus_timing=7, system=5.0ns
  1080. reset failed
  1081. get_chip_type and ret:fffffffe
  1082. get_chip_type and ret:fffffffe
  1083. chip detect failed and ret:fffffffe
  1084. nandphy_init failed and ret=0xfffffff1
  1085. MMC: aml_priv->desc_buf = 0x00000000b3eb56b0
  1086. aml_priv->desc_buf = 0x00000000b3eb79d0
  1087. SDIO Port B: 0, SDIO Port C: 1
  1088. emmc/sd response timeout, cmd8, status=0x1ff2800
  1089. emmc/sd response timeout, cmd55, status=0x1ff2800
  1090. init_part() 293: PART_TYPE_AML
  1091. [mmc_init] mmc init success
  1092. dtb magic 5f4c4d41
  1093. Amlogic multi-dtb tool
  1094. Multi dtb detected
  1095. Multi dtb tool version: v2 .
  1096. Support 3 dtbs.
  1097. aml_dt soc: gxm platform: q201 variant: 3g
  1098. dtb 0 soc: gxm plat: q201 vari: 1g
  1099. dtb 1 soc: gxm plat: q201 vari: 2g
  1100. dtb 2 soc: gxm plat: q201 vari: 3g
  1101. Find match dtb: 2
  1102. start dts,buffer=00000000b3eba200,dt_addr=00000000b3ed1a00
  1103. Amlogic multi-dtb tool
  1104. Multi dtb detected
  1105. Multi dtb tool version: v2 .
  1106. Support 3 dtbs.
  1107. aml_dt soc: gxm platform: q201 variant: 3g
  1108. dtb 0 soc: gxm plat: q201 vari: 1g
  1109. dtb 1 soc: gxm plat: q201 vari: 2g
  1110. dtb 2 soc: gxm plat: q201 vari: 3g
  1111. Find match dtb: 2
  1112. parts: 10
  1113. 00: logo 0000000002000000 1
  1114. 01: recovery 0000000002000000 1
  1115. 02: rsv 0000000000800000 1
  1116. 03: tee 0000000000800000 1
  1117. 04: crypt 0000000002000000 1
  1118. 05: misc 0000000002000000 1
  1119. 06: boot 0000000002000000 1
  1120. 07: system 0000000080000000 1
  1121. 08: cache 0000000020000000 2
  1122. 09: data ffffffffffffffff 4
  1123. init_part() 293: PART_TYPE_AML
  1124. eMMC/TSD partition table have been checked OK!
  1125. check pattern failed, need to write pattern
  1126. several calibration pattern blocks write OK
  1127. mmc env offset: 0x27400000
  1128. In: serial
  1129. Out: serial
  1130. Err: serial
  1131. reboot_mode=normal
  1132. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  1133. _verify_dtb_checksum()-917: calc 4305b779, store 4305b779
  1134. _verify_dtb_checksum()-917: calc 4305b779, store 4305b779
  1135. dtb_read()-1039: total valid 2
  1136. dtb_read()-1106: do nothing
  1137. Amlogic multi-dtb tool
  1138. Multi dtb detected
  1139. Multi dtb tool version: v2 .
  1140. Support 3 dtbs.
  1141. aml_dt soc: gxm platform: q201 variant: 3g
  1142. dtb 0 soc: gxm plat: q201 vari: 1g
  1143. dtb 1 soc: gxm plat: q201 vari: 2g
  1144. dtb 2 soc: gxm plat: q201 vari: 3g
  1145. Find match dtb: 2
  1146. vpu: clk_level in dts: 7
  1147. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  1148. vpu: vpu_clk_gate_init_off
  1149. vpp: vpp_init
  1150. hpd_state=1
  1151. [2160p60hz] is invalid for cvbs.
  1152. set hdmitx VIC = 97
  1153. config HPLL = 5940000
  1154. HPLL: 0xc000027b
  1155. config HPLL done
  1156. j = 8 vid_clk_div = 1
  1157. hdmitx: set enc for VIC: 97
  1158. HDMITX-DWC addr=0x10004006 rd_data=0x40
  1159. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  1160. rx version is 2.0 div=40
  1161. hdmtix: set audio
  1162. hdmitx phy setting done
  1163. vpp: vpp_pq_load pq val error !!!
  1164. Net: dwmac.c9410000amlkey_init() enter!
  1165. [EFUSE_MSG]keynum is 4
  1166. [BL31]: tee size: 0
  1167.  
  1168. card in
  1169. init_part() 278: PART_TYPE_DOS
  1170. [mmc_init] mmc init success
  1171. MMC Device 2 not found
  1172. cfgload: no boot.ini or empty file
  1173. Start read misc partition datas!
  1174. info->attemp_times = 0
  1175. info->active_slot = 0
  1176. info->slot_info[0].bootable = 0
  1177. info->slot_info[0].online = 0
  1178. info->slot_info[1].bootable = 0
  1179. info->slot_info[1].online = 0
  1180. info->attemp_times = 0
  1181. boot-info is invalid. Resetting.
  1182. save boot-info
  1183. info->attemp_times = 0
  1184. info->active_slot = 0
  1185. info->slot_info[0].bootable = 1
  1186. info->slot_info[0].online = 1
  1187. info->slot_info[1].bootable = 0
  1188. info->slot_info[1].online = 0
  1189. info->attemp_times = 0
  1190. attemp_times = 0
  1191. active slot = 0
  1192. wipe_data=successful
  1193. wipe_cache=successful
  1194. upgrade_step=2
  1195. [OSD]load fb addr from dts
  1196. [OSD]fb_addr for logo: 0x7f851000
  1197. [OSD]load fb addr from dts
  1198. [OSD]fb_addr for logo: 0x7f851000
  1199. [CANVAS]addr=0x7f851000 width=3840, height=2160
  1200. amlkey_init() enter!
  1201. amlkey_init() 71: already init!
  1202. [EFUSE_MSG]keynum is 4
  1203. [BL31]: tee size: 0
  1204. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  1205. [KM]Error:f[key_manage_query_size]L507:key[mac] not programed yet
  1206. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  1207. gpio: pin GPIOAO_2 (gpio 102) value is 1
  1208. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
  1209. gxm_q201_v1#
  1210.  
  1211. gxm_q201_v1#
  1212.  
  1213. gxm_q201_v1#
  1214.  
  1215. gxm_q201_v1#
  1216.  
  1217. gxm_q201_v1#
  1218.  
  1219. gxm_q201_v1#
  1220.  
  1221. gxm_q201_v1#
  1222.  
  1223. gxm_q201_v1#
  1224.  
  1225. gxm_q201_v1#
  1226.  
  1227. gxm_q201_v1#
  1228.  
  1229. gxm_q201_v1#
  1230.  
  1231. gxm_q201_v1#
  1232.  
  1233. gxm_q201_v1#store erase dtb
  1234.  
  1235. start erase dtb......
  1236. start = 81920,end = 82943
  1237. dev # 1, , several blocks erased OK
  1238. gxm_q201_v1#fatload mmc 0 ${dtb_mem_addr} meson1.dtb
  1239.  
  1240. reading meson1.dtb
  1241. 143360 bytes read in 17 ms (8 MiB/s)
  1242. gxm_q201_v1#store dtb write ${dtb_mem_addr} 0x40000
  1243.  
  1244. [store]To run cmd[emmc dtb_write 0x1000000 0x40000]
  1245. dtb_write()-1140: valid 2
  1246. dtb_write()-1160: new stamp 23, checksum 0xd76acd16, version 1, magic A~D
  1247. dtb magic 5f4c4d41
  1248. Amlogic multi-dtb tool
  1249. Multi dtb detected
  1250. Multi dtb tool version: v2 .
  1251. Support 3 dtbs.
  1252. aml_dt soc: gxm platform: q201 variant: 3g
  1253. dtb 0 soc: gxm plat: q201 vari: 1g
  1254. dtb 1 soc: gxm plat: q201 vari: 2g
  1255. dtb 2 soc: gxm plat: q201 vari: 3g
  1256. Find match dtb: 2
  1257. start dts,buffer=0000000001000000,dt_addr=0000000001017800
  1258. dtb magic 5f4c4d41
  1259. Amlogic multi-dtb tool
  1260. Multi dtb detected
  1261. Multi dtb tool version: v2 .
  1262. Support 3 dtbs.
  1263. aml_dt soc: gxm platform: q201 variant: 3g
  1264. dtb 0 soc: gxm plat: q201 vari: 1g
  1265. dtb 1 soc: gxm plat: q201 vari: 2g
  1266. dtb 2 soc: gxm plat: q201 vari: 3g
  1267. Find match dtb: 2
  1268. start dts,buffer=0000000001000000,dt_addr=0000000001017800
  1269. Amlogic multi-dtb tool
  1270. Multi dtb detected
  1271. Multi dtb tool version: v2 .
  1272. Support 3 dtbs.
  1273. aml_dt soc: gxm platform: q201 variant: 3g
  1274. dtb 0 soc: gxm plat: q201 vari: 1g
  1275. dtb 1 soc: gxm plat: q201 vari: 2g
  1276. dtb 2 soc: gxm plat: q201 vari: 3g
  1277. Find match dtb: 2
  1278. parts: 10
  1279. 00: logo 0000000002000000 1
  1280. 01: recovery 0000000002000000 1
  1281. 02: rsv 0000000000800000 1
  1282. 03: tee 0000000000800000 1
  1283. 04: crypt 0000000002000000 1
  1284. 05: misc 0000000002000000 1
  1285. 06: boot 0000000002000000 1
  1286. 07: system 0000000080000000 1
  1287. 08: cache 0000000020000000 2
  1288. 09: data ffffffffffffffff 4
  1289. init_part() 293: PART_TYPE_AML
  1290. partition table success
  1291. gxm_q201_v1#reset
  1292.  
  1293. resetting ...
  1294. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  1295. TE: 37846
  1296.  
  1297. BL2 Built : 16:32:58, Nov 3 2017.
  1298. gxl gb5491d8 - xiaobo.gu@droid12
  1299.  
  1300. set vdd cpu_a to 1120 mv
  1301. set vdd cpu_b to 1050 mv
  1302. set vddee to 1000 mv
  1303. Board ID = 10
  1304. CPU clk: 1200MHz
  1305. DQS-corr enabled
  1306. DDR scramble enabled
  1307. STICKY_REG0: 0x00000000
  1308. STICKY_REG1: 0x00000000
  1309. STICKY_REG9: 0x00000000
  1310. LPDDR3 chl: Rank0+1 @ 720MHz
  1311. DDR0_PUB_CATR0 1 value
  1312. DDR0_PUB_CATR0: 0x00141020....
  1313. DDR0_PUB_CATR1: 0x0203aaaa....
  1314. DDR0_PUB_PGSR0: 0x8000003f....
  1315. Rank0: 2048MB(auto)-2T-3
  1316. Rank1: 1024MB(auto)-2T-3
  1317. DataBus test pass!
  1318. AddrBus test pass!
  1319. -s
  1320. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  1321. New fip structure!
  1322. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  1323. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  1324. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066a00
  1325. NOTICE: BL3-1: v1.0(release):35dd647
  1326. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  1327. NOTICE: BL31: BL33 decompress pass
  1328. mpu_config_enable:ok
  1329.  
  1330. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  1331.  
  1332. OPS=0x82
  1333.  
  1334. wdt: reset registers!
  1335.  
  1336. 24 f 34 3e 3e 47 e0 46 6f c0 f1 58 [0.286147 Inits done]
  1337.  
  1338. secure task start!
  1339. high task start!
  1340. low task start!
  1341. ERROR: Error initializing runtime service opteed_fast
  1342.  
  1343.  
  1344. U-Boot 2015.01-gbc6f877-dirty (Dec 27 2018 - 16:32:41)
  1345.  
  1346. DRAM: 3 GiB
  1347. Relocation Offset is: b6eb5000
  1348. register usb cfg[0][1] = 00000000b7f5b060
  1349. [CANVAS]canvas init
  1350. boot_device_flag : 1
  1351. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  1352. init bus_cycle=6, bus_timing=7, system=5.0ns
  1353. reset failed
  1354. get_chip_type and ret:fffffffe
  1355. get_chip_type and ret:fffffffe
  1356. chip detect failed and ret:fffffffe
  1357. nandphy_init failed and ret=0xfffffff1
  1358. MMC: aml_priv->desc_buf = 0x00000000b3eb56b0
  1359. aml_priv->desc_buf = 0x00000000b3eb79d0
  1360. SDIO Port B: 0, SDIO Port C: 1
  1361. emmc/sd response timeout, cmd8, status=0x1ff2800
  1362. emmc/sd response timeout, cmd55, status=0x1ff2800
  1363. init_part() 293: PART_TYPE_AML
  1364. [mmc_init] mmc init success
  1365. dtb magic 5f4c4d41
  1366. Amlogic multi-dtb tool
  1367. Multi dtb detected
  1368. Multi dtb tool version: v2 .
  1369. Support 3 dtbs.
  1370. aml_dt soc: gxm platform: q201 variant: 3g
  1371. dtb 0 soc: gxm plat: q201 vari: 1g
  1372. dtb 1 soc: gxm plat: q201 vari: 2g
  1373. dtb 2 soc: gxm plat: q201 vari: 3g
  1374. Find match dtb: 2
  1375. start dts,buffer=00000000b3eba200,dt_addr=00000000b3ed1a00
  1376. Amlogic multi-dtb tool
  1377. Multi dtb detected
  1378. Multi dtb tool version: v2 .
  1379. Support 3 dtbs.
  1380. aml_dt soc: gxm platform: q201 variant: 3g
  1381. dtb 0 soc: gxm plat: q201 vari: 1g
  1382. dtb 1 soc: gxm plat: q201 vari: 2g
  1383. dtb 2 soc: gxm plat: q201 vari: 3g
  1384. Find match dtb: 2
  1385. parts: 10
  1386. 00: logo 0000000002000000 1
  1387. 01: recovery 0000000002000000 1
  1388. 02: rsv 0000000000800000 1
  1389. 03: tee 0000000000800000 1
  1390. 04: crypt 0000000002000000 1
  1391. 05: misc 0000000002000000 1
  1392. 06: boot 0000000002000000 1
  1393. 07: system 0000000080000000 1
  1394. 08: cache 0000000020000000 2
  1395. 09: data ffffffffffffffff 4
  1396. init_part() 293: PART_TYPE_AML
  1397. eMMC/TSD partition table have been checked OK!
  1398. check pattern success
  1399. mmc env offset: 0x27400000
  1400. In: serial
  1401. Out: serial
  1402. Err: serial
  1403. reboot_mode=watchdog_reboot
  1404. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  1405. _verify_dtb_checksum()-917: calc d76acd16, store d76acd16
  1406. _verify_dtb_checksum()-917: calc d76acd16, store d76acd16
  1407. dtb_read()-1039: total valid 2
  1408. dtb_read()-1106: do nothing
  1409. Amlogic multi-dtb tool
  1410. Multi dtb detected
  1411. Multi dtb tool version: v2 .
  1412. Support 3 dtbs.
  1413. aml_dt soc: gxm platform: q201 variant: 3g
  1414. dtb 0 soc: gxm plat: q201 vari: 1g
  1415. dtb 1 soc: gxm plat: q201 vari: 2g
  1416. dtb 2 soc: gxm plat: q201 vari: 3g
  1417. Find match dtb: 2
  1418. vpu: clk_level in dts: 7
  1419. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  1420. vpu: vpu_clk_gate_init_off
  1421. vpp: vpp_init
  1422. hpd_state=1
  1423. [2160p60hz] is invalid for cvbs.
  1424. set hdmitx VIC = 97
  1425. config HPLL = 5940000
  1426. HPLL: 0xc000027b
  1427. config HPLL done
  1428. j = 8 vid_clk_div = 1
  1429. hdmitx: set enc for VIC: 97
  1430. HDMITX-DWC addr=0x10004006 rd_data=0x40
  1431. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  1432. rx version is 2.0 div=40
  1433. hdmtix: set audio
  1434. hdmitx phy setting done
  1435. vpp: vpp_pq_load pq val error !!!
  1436. Net: dwmac.c9410000amlkey_init() enter!
  1437. [EFUSE_MSG]keynum is 4
  1438. [BL31]: tee size: 0
  1439.  
  1440. card out
  1441. emmc/sd response timeout, cmd8, status=0x1ff2800
  1442. emmc/sd response timeout, cmd55, status=0x1ff2800
  1443. emmc/sd response timeout, cmd1, status=0x1ff2800
  1444. MMC Device 2 not found
  1445. cfgload: no boot.ini or empty file
  1446. Start read misc partition datas!
  1447. info->attemp_times = 0
  1448. info->active_slot = 0
  1449. info->slot_info[0].bootable = 1
  1450. info->slot_info[0].online = 1
  1451. info->slot_info[1].bootable = 0
  1452. info->slot_info[1].online = 0
  1453. info->attemp_times = 0
  1454. attemp_times = 0
  1455. active slot = 0
  1456. wipe_data=successful
  1457. wipe_cache=successful
  1458. upgrade_step=2
  1459. [OSD]load fb addr from dts
  1460. [OSD]fb_addr for logo: 0x7f851000
  1461. [OSD]load fb addr from dts
  1462. [OSD]fb_addr for logo: 0x7f851000
  1463. [CANVAS]addr=0x7f851000 width=3840, height=2160
  1464. amlkey_init() enter!
  1465. amlkey_init() 71: already init!
  1466. [EFUSE_MSG]keynum is 4
  1467. [BL31]: tee size: 0
  1468. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  1469. [KM]Error:f[key_manage_query_size]L507:key[mac] not programed yet
  1470. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  1471. gpio: pin GPIOAO_2 (gpio 102) value is 1
  1472. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
  1473. ee_gate_off ...
  1474. ## Booting Android Image at 0x01080000 ...
  1475. reloc_addr =b3f3a450
  1476. copy done
  1477. Kernel command line: buildvariant=userdebug
  1478. load dtb from 0x1000000 ......
  1479. Amlogic multi-dtb tool
  1480. Single dtb detected
  1481. Uncompressing Kernel Image ... OK
  1482. kernel loaded at 0x01080000, end = 0x021c8c40
  1483. Loading Ramdisk to b3d62000, end b3ea2681 ... OK
  1484. Loading Device Tree to 000000001fff1000, end 000000001ffff0b0 ... OK
  1485. fdt_instaboot: no instaboot image
  1486.  
  1487. Starting kernel ...
  1488.  
  1489. uboot time: 2408820 us
  1490. [ 0.000000@0] Initializing cgroup subsys cpu
  1491. [ 0.000000@0] Initializing cgroup subsys cpuacct
  1492. [ 0.000000@0] Linux version 3.14.29-gef2caefb9bc (server@ubuntu) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #3 SMP PREEMPT Fri Jan 26 11:15:30 CST 2018
  1493. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  1494. [ 0.000000@0] no prop version_code
  1495. [ 0.000000@0] bootconsole [earlycon0] enabled
  1496. [ 0.000000@0] fdt Reserved memory table:
  1497. [ 0.000000@0] linux,di: 0x00000000be200000 - 0x00000000c0000000 (30 MiB)
  1498. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x00000000be200000, size 30 MiB
  1499. [ 0.000000@0] linux,chunk-reserve: 0x00000000ba200000 - 0x00000000be200000 (64 MiB)
  1500. [ 0.000000@0] linux,vdin1_cma: 0x00000000b9000000 - 0x00000000ba000000 (16 MiB)
  1501. [ 0.000000@0] cma: Reserved 16 MiB at b9000000, total cma pages:4096
  1502. [ 0.000000@0] linux,ppmgr: 0x00000000ba200000 - 0x00000000ba200000 (0 MiB)
  1503. [ 0.000000@0] linux,codec_mm_cma: 0x000000009ec00000 - 0x00000000b3c00000 (336 MiB)
  1504. [ 0.000000@0] cma: Reserved 336 MiB at 9ec00000, total cma pages:90112
  1505. [ 0.000000@0] linux,picdec: 0x00000000ba200000 - 0x00000000ba200000 (0 MiB)
  1506. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  1507. [ 0.000000@0] linux,codec_mm_reserved: 0x00000000b4f00000 - 0x00000000b9000000 (65 MiB)
  1508. [ 0.000000@0] fdt Reserved memory total: 595 MiB
  1509. [ 0.000000@0] cma: Reserved 8 MiB at b4400000, total cma pages:92160
  1510. [ 0.000000@0] psci: Using PSCI v0.1 Function IDs from DT
  1511. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0ba160000 s19968 r8192 d20992 u49152
  1512. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 768261
  1513. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,2160p60hz maxcpus=8 vout=2160p60hz,enable hdmimode=2160p60hz cvbsmode=576cvbs hdmitx=cec3f cvbsdrv=0 pq= androidboot.firstboot=1 jtag=apao androidboot.hardware=amlogic androidboot.slot_suffix=_a buildvariant=userdebug
  1514. [ 0.000000@0] logo: osd1
  1515. [ 0.000000@0] logo: loaded
  1516. [ 0.000000@0] logo: 0x3d800000
  1517. [ 0.000000@0] logo: 2160p60hz
  1518. [ 0.000000@0] vout_serve: 2160p60hz
  1519. [ 0.000000@0] vout_serve: enable: 1
  1520. [ 0.000000@0] logo: get hdmimode: 2160p60hz
  1521. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  1522. [ 0.000000@0] tv_vout: cvbs performance line = 0
  1523. [ 0.000000@0] [amvecm] pq string error !!!
  1524. [ 0.000000@0] jtag: jtag select 2
  1525. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  1526. [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  1527. [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  1528. [ 0.000000@0] Memory: 2427908K/3140608K available (10982K kernel code, 1259K rwdata, 4148K rodata, 1303K init, 3808K bss, 712700K reserved)
  1529. [ 0.000000@0] Virtual kernel memory layout:
  1530. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  1531. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8044210000 ( 66 MB)
  1532. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  1533. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
  1534. [ 0.000000@0] .init : 0xffffffc001f48000 - 0xffffffc00208de00 ( 1304 kB)
  1535. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001f47814 ( 15135 kB)
  1536. [ 0.000000@0] .data : 0xffffffc00208e000 - 0xffffffc0021c8c40 ( 1260 kB)
  1537. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01f46fff]
  1538. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
  1539. [ 0.000000@0] arch_multi_cluster:1
  1540. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  1541. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  1542. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  1543. [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  1544. [ 0.008246@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994
  1545. [ 0.016868@0] Console: colour dummy device 80x25
  1546. [ 0.021097@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  1547. [ 0.031672@0] pid_max: default: 32768 minimum: 301
  1548. [ 0.036591@0] Security Framework initialized
  1549. [ 0.040787@0] SELinux: Initializing.
  1550. [ 0.044534@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  1551. [ 0.051369@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  1552. [ 0.065446@0] Initializing cgroup subsys debug
  1553. [ 0.065486@0] Initializing cgroup subsys freezer
  1554. [ 0.069014@0] ftrace: allocating 37848 entries in 148 pages
  1555. [ 0.126127@0] /cpus/cpu@0: Missing clock-frequency property
  1556. [ 0.126167@0] /cpus/cpu@1: Missing clock-frequency property
  1557. [ 0.131748@0] /cpus/cpu@2: Missing clock-frequency property
  1558. [ 0.137383@0] /cpus/cpu@3: Missing clock-frequency property
  1559. [ 0.142950@0] /cpus/cpu@100: Missing clock-frequency property
  1560. [ 0.148732@0] /cpus/cpu@101: Missing clock-frequency property
  1561. [ 0.154501@0] /cpus/cpu@102: Missing clock-frequency property
  1562. [ 0.160282@0] /cpus/cpu@103: Missing clock-frequency property
  1563. [ 0.166050@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  1564. [ 0.216456@0] Meson chip version = RevA (22:A - 82:0)
  1565. [ 0.234805@1] CPU1: Booted secondary processor
  1566. [ 0.254766@2] CPU2: Booted secondary processor
  1567. [ 0.274772@3] CPU3: Booted secondary processor
  1568. [ 0.294811@4] CPU4: Booted secondary processor
  1569. [ 0.314808@5] CPU5: Booted secondary processor
  1570. [ 0.334822@6] CPU6: Booted secondary processor
  1571. [ 0.354852@7] CPU7: Booted secondary processor
  1572. [ 0.354950@0] Brought up 8 CPUs
  1573. [ 0.383766@0] SMP: Total of 8 processors activated.
  1574. [ 0.397644@2] sched: registering cpufreq notifiers for scale-invariant loads
  1575. [ 0.399175@2] instabooting: 0
  1576. [ 0.420974@2] cma: cma_init_reserved_areas, use_cma_first:1
  1577. [ 0.421103@2] pinctrl core: initialized pinctrl subsystem
  1578. [ 0.427166@2] regulator-dummy: no parameters
  1579. [ 0.431675@3] NET: Registered protocol family 16
  1580. [ 0.437684@2] ramoops: using module parameters
  1581. [ 0.440438@2] console [pstore-1] enabled
  1582. [ 0.443745@2] pstore: Registered ramoops as persistent store backend
  1583. [ 0.450158@2] ramoops: attached 0x100000@0x7300000, ecc: 0/0
  1584. [ 0.456869@2] cpuidle: using governor menu
  1585. [ 0.460210@3] aml_vdac_init: module init
  1586. [ 0.464068@2] register canvas platform driver
  1587. [ 0.468342@3] register rdma platform driver
  1588. [ 0.474486@3] vdso: 2 pages (1 code, 1 data) at base ffffffc002098000
  1589. [ 0.478987@3] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  1590. [ 0.486359@3] DMA: preallocated 256 KiB pool for atomic allocations
  1591. [ 0.493423@3] software IO TLB [mem 0x99400000-0x99800000] (4MB) mapped at [ffffffc099400000-ffffffc0997fffff]
  1592. [ 0.502197@3] Serial: AMBA PL011 UART driver
  1593. [ 0.507198@2] aml_i2c version: 20140813
  1594. [ 0.510645@2] i2c-core: driver [pmu4] using legacy resume method
  1595. [ 0.516567@3] codec_mm:codec_mm_module_init
  1596. [ 0.520670@2] media_configs_system_init
  1597. [ 0.524622@2] aml_watch_point_probe, in
  1598. [ 0.528802@2] meson_mpll_clk: register mpll_clk_out0 success done
  1599. [ 0.534415@2] meson_mpll_clk: register mpll_clk_out1 success done
  1600. [ 0.540522@2] meson_mpll_clk: register mpll_clk_out2 success done
  1601. [ 0.546865@2] clk_sys: register PLL sys_pll success done
  1602. [ 0.551990@2] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  1603. [ 0.557366@2] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  1604. [ 0.562483@2] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
  1605. [ 0.568002@2] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
  1606. [ 0.573944@2] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  1607. [ 0.579909@2] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  1608. [ 0.585756@2] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  1609. [ 0.591625@2] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  1610. [ 0.597482@2] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  1611. [ 0.603379@2] gxl_clk: clock initialization complete
  1612. [ 0.608533@2] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff800003e764
  1613. [ 0.619052@2] aml_iomap: amlogic iomap probe done
  1614. [ 0.621614@2] pinmux-gxl c1109880.pinmux: Init pinux probe!
  1615. [ 0.627946@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  1616. [ 0.633703@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  1617. [ 0.641264@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  1618. [ 0.649515@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  1619. [ 0.657356@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  1620. domain-0 init dvfs: 4
  1621.  
  1622. domain-1 init dvfs: 4
  1623.  
  1624. [ 0.677818@2] codec_mm has 2 memory regions
  1625. [ 0.677897@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
  1626. [ 0.684532@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
  1627. [ 0.693119@2] codec_mm has 2 memory regions
  1628. [ 0.697200@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
  1629. [ 0.705226@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
  1630. [ 0.716285@3] vpu: driver version: v04
  1631. [ 0.717575@3] vpu: load vpu_clk: 666667000Hz(7)
  1632. [ 0.722148@2] vpu: vpu_probe OK
  1633. [ 0.727288@2] tv_vout: tvout_probe
  1634. [ 0.728591@2] tv_vout: chrdev devno 266338304 for disp
  1635. [ 0.733746@2] vout_notify: vout_register_server
  1636. [ 0.738312@2] tv_vout: register tv module server ok
  1637. [ 0.743464@2] tv_vout: create cdev tv
  1638. [ 0.746874@2] tv_vout: tvout_probe OK
  1639. [ 0.751257@2] canvas_probe reg=00000000c8838000,size=400
  1640. [ 0.755914@2] canvas maped reg_base =ffffff800009a000
  1641. [ 0.765442@3] rdma_probe
  1642. [ 1.169724@1] bio: create slab <bio-0> at 0
  1643. [ 1.170985@2] SCSI subsystem initialized
  1644. [ 1.173039@1] usbcore: registered new interface driver usbfs
  1645. [ 1.178185@2] usbcore: registered new interface driver hub
  1646. [ 1.183657@2] usbcore: registered new device driver usb
  1647. [ 1.189785@1] i2c-gpio i2c_gpio.41: using pins 172 (SDA) and 173 (SCL)
  1648. [ 1.195460@2] Linux video capture interface: v2.00
  1649. [ 1.200510@2] pps_core: LinuxPPS API ver. 1 registered
  1650. [ 1.205284@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  1651. [ 1.214714@1] PTP clock support registered
  1652. [ 1.220162@2] hdmitx: system: Ver: 2014May6
  1653. [ 1.223163@2] hdmitx: amhdmitx_probe
  1654. [ 1.226911@3] hdmitx: hdmi_init_chip_type: 0
  1655. [ 1.230930@3] hdmitx hpd irq = 89
  1656. [ 1.235001@3] hdmitx20: Mapped PHY: 0xc1100000
  1657. [ 1.238621@3] hdmitx20: Mapped PHY: 0xc8834400
  1658. [ 1.243218@3] hdmitx20: Mapped PHY: 0xd0100000
  1659. [ 1.247542@3] hdmitx20: Mapped PHY: 0xc8100000
  1660. [ 1.251993@3] hdmitx20: Mapped PHY: 0xc883c000
  1661. [ 1.256462@3] hdmitx20: Mapped PHY: 0xc1104400
  1662. [ 1.260916@3] hdmitx20: Mapped PHY: 0xc883a000
  1663. [ 1.265379@3] hdmitx20: Mapped PHY: 0xda83a000
  1664. [ 1.269847@3] hdmitx20: Mapped PHY: 0xd0044000
  1665. [ 1.274308@3] hdmitx: alread display in uboot 0x61
  1666. [ 1.279148@3] avmute set to 1
  1667. [ 1.282102@3] hdmitx: attr 444,8bit
  1668. [ 1.286289@2] tv_vout: tv_set_current_vmode[925]fps_target_mode=35
  1669. [ 1.291961@2] tv_vout: mode is 35,sync_duration_den=1,sync_duration_num=60
  1670. [ 1.293040@0] hdmitx: system: irq 2
  1671. [ 1.302233@2] tv_vout: already display in uboot
  1672. [ 1.306766@2] vout_serve: vinfo mode is: 2160p60hz
  1673. [ 1.311578@2] vout_serve: init mode 2160p60hz
  1674. [ 1.316279@2] vout_serve: create_vout_fops OK
  1675. [ 1.320330@2] vout_serve: create vout attribute OK
  1676. [ 1.325140@2] vout_serve: meson_vout_probe OK
  1677. [ 1.329779@2] logo: logo_init
  1678. [ 1.332996@2] osd_rdma: osd_rdma_init: rdma_table p=0xb4441000,op=0xb4441000 , v=0xffffff80000b9000
  1679. [ 1.341639@2] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy b4442000 reg_buf ffffffc0991cb000
  1680. [ 1.352098@2] rdma_register success, handle 1 table_size 4096
  1681. [ 1.357866@2] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  1682. [ 1.363947@2] rdma_register, rdma_table_addr ffffff80000d9000 rdma_table_addr_phy b4443000 reg_buf ffffffc099bfa000
  1683. [ 1.374419@2] rdma_register success, handle 2 table_size 4096
  1684. [ 1.380178@2] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  1685. [ 1.386282@2] Advanced Linux Sound Architecture Driver Initialized.
  1686. [ 1.392704@2] Bluetooth: Core ver 2.18
  1687. [ 1.395894@1] NET: Registered protocol family 31
  1688. [ 1.400417@1] Bluetooth: HCI device and connection manager initialized
  1689. [ 1.406964@1] Bluetooth: HCI socket layer initialized
  1690. [ 1.412050@1] Bluetooth: L2CAP socket layer initialized
  1691. [ 1.417309@1] Bluetooth: SCO socket layer initialized
  1692. [ 1.422366@1] NetLabel: Initializing
  1693. [ 1.425940@1] NetLabel: domain hash size = 128
  1694. [ 1.430490@1] NetLabel: protocols = UNLABELED CIPSOv4
  1695. [ 1.435718@1] NetLabel: unlabeled traffic allowed by default
  1696. [ 1.443814@2] Switched to clocksource arch_sys_counter
  1697. [ 1.489805@2] register gxtv_demod demod driver
  1698. [ 1.490267@1] [amlatvdemod..]aml_atvdemod_init.
  1699. [ 1.493344@1] NET: Registered protocol family 2
  1700. [ 1.498437@1] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  1701. [ 1.505514@1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  1702. [ 1.512602@1] TCP: Hash tables configured (established 32768 bind 32768)
  1703. [ 1.518909@1] TCP: reno registered
  1704. [ 1.522213@1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  1705. [ 1.528500@1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  1706. [ 1.535703@1] NET: Registered protocol family 1
  1707. [ 1.539933@1] RPC: Registered named UNIX socket transport module.
  1708. [ 1.545757@1] RPC: Registered udp transport module.
  1709. [ 1.550636@1] RPC: Registered tcp transport module.
  1710. [ 1.555543@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1711. [ 1.562362@1] pwm: output_co = 16 ; clock_co = 8
  1712. [ 1.566865@1] pwm: npwm= 16
  1713. [ 1.569912@2] pwm: probe ok
  1714. [ 1.572870@2] wifi: power_on_pin_OD = 0;
  1715. [ 1.576436@2] aml_wifi wifi.34: [wifi_dev_probe] no power_on_pin2
  1716. [ 1.582528@2] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm phandle val=40;pwm-channel1=4;pwm-channel2=12
  1717. [ 1.592561@2] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
  1718. [ 1.600258@2] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
  1719. [ 1.607957@2] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
  1720. [ 1.615713@2] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
  1721. [ 1.623369@2] hdmitx: plugin
  1722. [ 1.623829@3] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
  1723. [ 1.623833@3] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
  1724. [ 1.623837@3] aml_wifi wifi.34: [pwm_double_channel_conf_dt] wifi pwm dt ok
  1725. [ 1.623860@3] aml_wifi wifi.34: [pwm_double_channel_conf] wifi pwm conf ok
  1726. [ 1.623919@3] aml_wifi wifi.34: [wifi_dev_probe] dhd_static_buf setup
  1727. [ 1.623999@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  1728. [ 1.624004@3] aml_wifi wifi.34: [wifi_dev_probe] interrupt_pin=241
  1729. [ 1.624008@3] aml_wifi wifi.34: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  1730. [ 1.624012@3] aml_wifi wifi.34: [wifi_dev_probe] power_on_pin=240
  1731. [ 1.624016@3] aml_wifi wifi.34: [wifi_dev_probe] clock_32k_pin=0
  1732. [ 1.624347@1] aml_wifi wifi.34: [wifi_setup_dt] wifi_setup_dt
  1733. [ 1.624388@1] aml_wifi wifi.34: [wifi_setup_dt] interrupt_pin(241)
  1734. [ 1.624402@1] aml_wifi wifi.34: [wifi_setup_dt] power_on_pin(240)
  1735. [ 1.624790@3] Unpacking initramfs...
  1736. [ 1.671930@3] Freeing initrd memory: 1280K (ffffffc0b3d62000 - ffffffc0b3ea2000)
  1737. [ 1.677516@1] futex hash table entries: 2048 (order: 5, 131072 bytes)
  1738. [ 1.677628@1] Initialise system trusted keyring
  1739. [ 1.677678@1] audit: initializing netlink subsys (disabled)
  1740. [ 1.677724@1] audit: type=2000 audit(1.600:1): initialized
  1741. [ 1.678728@3] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  1742. [ 1.686481@3] VFS: Disk quotas dquot_6.5.2
  1743. [ 1.686758@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1744. [ 1.692121@3] NFS: Registering the id_resolver key type
  1745. [ 1.692162@3] Key type id_resolver registered
  1746. [ 1.692163@3] Key type id_legacy registered
  1747. [ 1.692186@3] NTFS driver 2.1.30 [Flags: R/O].
  1748. [ 1.692587@3] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  1749. [ 1.693393@3] fuse init (API version 7.22)
  1750. [ 1.694106@3] msgmni has been set to 5464
  1751. [ 1.798419@1] NET: Registered protocol family 38
  1752. [ 1.801687@1] Key type asymmetric registered
  1753. [ 1.805976@1] Asymmetric key parser 'x509' registered
  1754. [ 1.811489@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  1755. [ 1.818668@1] io scheduler noop registered
  1756. [ 1.822762@1] io scheduler deadline registered
  1757. [ 1.827495@3] io scheduler cfq registered (default)
  1758. [ 1.853943@2] EDID Parser:
  1759. [ 1.854051@2] hdmitx: edid: maybe invalid dv0 data
  1760. [ 1.855893@2] hdmitx: edid: change preferred_mode from 0 to 97
  1761. [ 1.861753@2] hdmitx: get PMT vic: 97
  1762. [ 1.865458@2] hdmitx: edid: find IEEEOUT
  1763. [ 1.869374@2] hdmitx: update rx hdr info 5 at edid parsing
  1764. [ 1.874940@2] 00ffffffffffff004c2df70d000e0001011b0103807944780a23ada4544d9926
  1765. [ 1.874940@2] 0f474abdef80714f81c0810081809500a9c0b300010108e80030f2705a80b058
  1766. [ 1.874940@2] 8a00501d7400001e023a801871382d40582c4500501d7400001e000000fd0018
  1767. [ 1.874940@2] 4b0f873c000a202020202020000000fc0053414d53554e470a20202020200165
  1768. [ 1.874940@2]
  1769. [ 1.874940@2]
  1770. [ 1.885383@3] meson-rng c8834000.rng: hwrng registered
  1771. [ 1.889247@3] loop: module loaded
  1772. [ 1.889897@0] zram: Created 1 device(s) ...
  1773. [ 1.891004@0] mtdoops: mtd device (mtddev=name/number) must be supplied
  1774. [ 1.891798@3] tun: Universal TUN/TAP device driver, 1.6
  1775. [ 1.891800@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  1776. [ 1.938315@2] 020359f05761101f041305142021225d5e5f606566626364071603122c090707
  1777. [ 1.938315@2] 1507503d04c057070083010000e2000fe305c3016e030c003000b83c20008001
  1778. [ 1.938315@2] 02030467d85dc401788003e3060d01e30f01e0e5018b849001011d80d0721c16
  1779. [ 1.938315@2] 20102c2580501d7400009e662156aa51001e30468f3300501d7400001e0000b3
  1780. [ 1.938315@2]
  1781. [ 1.938315@2]
  1782. [ 1.970651@2] hdmitx: video: get current mode: 2160p60hz
  1783. [ 1.975947@2] hdmitx: update rx hdr info 5
  1784. [ 1.980051@2] hdmitx: update physcial size: 1210 680
  1785. [ 1.985066@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 97
  1786. [ 1.991791@2] hdmtix: set audio
  1787. [ 1.994942@2] hdmitx tx_aud_src = 0
  1788. [ 1.998446@2] hdmitx: fs = 0, cd = 4, tmds_clk = 594000
  1789. [ 2.003677@2] hdmitx aud_n_para = 6144
  1790. [ 2.018974@3] libphy: stmmac: probed
  1791. [ 2.019011@3] eth0: PHY ID 03815c11 at 1 IRQ POLL (stmmac-0:01) active
  1792. [ 2.024145@3] PPP generic driver version 2.4.2
  1793. [ 2.028247@2] PPP BSD Compression module registered
  1794. [ 2.032904@2] PPP Deflate Compression module registered
  1795. [ 2.038187@2] PPP MPPE Compression module registered
  1796. [ 2.043141@2] NET: Registered protocol family 24
  1797. [ 2.047985@3] usbcore: registered new interface driver asix
  1798. [ 2.053564@3] usbcore: registered new interface driver ax88179_178a
  1799. [ 2.059832@2] usbcore: registered new interface driver cdc_ether
  1800. [ 2.065915@2] usbcore: registered new interface driver net1080
  1801. [ 2.071711@3] usbcore: registered new interface driver cdc_subset
  1802. [ 2.078157@2] usbcore: registered new interface driver zaurus
  1803. [ 2.083632@2] usbcore: registered new interface driver cdc_ncm
  1804. [ 2.089752@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1805. [ 2.096108@3] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  1806. [ 2.102160@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1807. [ 2.108796@3] usbcore: registered new interface driver cdc_acm
  1808. [ 2.114131@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1809. [ 2.122501@2] usbcore: registered new interface driver usb-storage
  1810. [ 2.128880@3] usbcore: registered new interface driver usbserial
  1811. [ 2.135470@3] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800010e000
  1812. [ 2.145592@3] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  1813. [ 2.152102@3] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff800011a080
  1814. [ 2.163542@3] mousedev: PS/2 mouse device common for all mice
  1815. [ 2.169166@2] usbcore: registered new interface driver xpad
  1816. [ 2.174412@3] i2c /dev entries driver
  1817. [ 2.178345@2] IR NEC protocol handler initialized
  1818. [ 2.182530@2] IR RC5(x) protocol handler initialized
  1819. [ 2.187530@2] IR RC6 protocol handler initialized
  1820. [ 2.192240@2] IR JVC protocol handler initialized
  1821. [ 2.196999@2] IR Sony protocol handler initialized
  1822. [ 2.201777@2] IR RC5 (streamzap) protocol handler initialized
  1823. [ 2.207558@2] IR SANYO protocol handler initialized
  1824. [ 2.212452@2] IR MCE Keyboard/mouse protocol handler initialized
  1825. [ 2.218745@2] usbcore: registered new interface driver uvcvideo
  1826. [ 2.224451@2] USB Video Class driver (1.1.1)
  1827. [ 2.228890@3] usbcore: registered new interface driver cx231xx
  1828. [ 2.234603@3] cx231xx: Cx231xx dvb Extension initialized
  1829. [ 2.240936@3] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
  1830. [ 2.248762@3] Bluetooth: HCI UART driver ver 2.2
  1831. [ 2.253231@3] Bluetooth: HCI H4 protocol initialized
  1832. [ 2.258645@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  1833. [ 2.266049@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
  1834. [ 2.269452@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
  1835. [ 2.277321@0] CPUidle arm64: cpuidle init start!!
  1836. [ 2.282220@0] CPUidle arm64: cpuidle init done!
  1837. [ 2.287013@2] hidraw: raw HID events driver (C) Jiri Kosina
  1838. [ 2.292241@2] @@@@@@@@@@_____2______in dia_init()
  1839. [ 2.296580@2] ATVR driver - init called!
  1840. [ 2.300620@3] usbcore: registered new interface driver usbhid
  1841. [ 2.306278@3] usbhid: USB HID core driver
  1842. [ 2.310707@2] ashmem: initialized
  1843. [ 2.313824@3] logger: created 256K log 'log_main'
  1844. [ 2.318932@3] logger: created 256K log 'log_events'
  1845. [ 2.323845@3] logger: created 256K log 'log_radio'
  1846. [ 2.328673@3] logger: created 256K log 'log_system'
  1847. [ 2.338005@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff800011c4c0
  1848. [ 2.340149@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  1849. [ 2.355167@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  1850. [ 2.357797@2] console [ttyS0] enabled
  1851. [ 2.357797@2] console [ttyS0] enabled
  1852. [ 2.365049@2] bootconsole [earlycon0] disabled
  1853. [ 2.365049@2] bootconsole [earlycon0] disabled
  1854. [ 2.374613@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800011e4c0
  1855. [ 2.380849@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  1856. [ 2.391432@2] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff]
  1857. [ 2.400086@2] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16
  1858. [ 2.407872@2] hdmitx_hdcp_init
  1859. [ 2.411691@0] aml_vrtc rtc.33: rtc core: registered aml_vrtc as rtc0
  1860. [ 2.416955@2] BLASTER Driver Init
  1861. [ 2.420572@2] secmon has 1 memory regions
  1862. [ 2.423990@2] secmon: share in base: 0xffffff800013a000, share out base: 0xffffff800013c000
  1863. [ 2.432150@2] secmon secmon.4: assigned reserved memory node linux,secmon ok
  1864. [ 2.439134@2] secmon: probe done
  1865. [ 2.442793@2] storage: storage in base: 0xffffff8001800000
  1866. [ 2.447849@2] storage: storage out base: 0xffffff8001880000
  1867. [ 2.453268@2] storage: storage block base: 0xffffff8001900000
  1868. [ 2.458965@2] storage: probe done!
  1869. [ 2.463065@2] aml_sd_emmc_probe: line 3608
  1870. [ 2.466456@2] mmc driver version: 1.07, 2017-4-26: Support new emmc host controller for version 3
  1871. [ 2.475754@2] aml_sd_emmc_reg_init 1152
  1872. [ 2.479026@2] get property: ocr_avail, value:0x00200080
  1873. [ 2.485510@2] get property: f_min, value:300000
  1874. [ 2.491565@2] get property: f_max, value:50000000
  1875. [ 2.497867@2] get property: max_req_size, value:0x00020000
  1876. [ 2.504367@2] get property: pinname, str:emmc
  1877. [ 2.510111@2] get property: card_type, value:1
  1878. [ 2.515825@2] get property: gpio_dat3, str:
  1879. [ 2.521234@2] get property: hw_reset, str:
  1880. [ 2.526699@2] emmc:pdata->caps = c0000547
  1881. [ 2.530638@2] emmc:pdata->caps2 = 0
  1882. [ 2.534104@2] emmc:pdata->pm_caps = 0
  1883. [ 2.537735@2] storage 1, boot 1
  1884. [ 2.540811@2] get_storage_dev return 1
  1885. [ 2.583873@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1886. [ 2.584113@2] aml_sd_emmc_probe: line 3608
  1887. [ 2.588549@2] aml_sd_emmc_reg_init 1152
  1888. [ 2.591976@2] get property: ocr_avail, value:0x00200080
  1889. [ 2.598449@2] get property: f_min, value:400000
  1890. [ 2.604526@2] get property: f_max, value:100000000
  1891. [ 2.610891@2] get property: max_req_size, value:0x00020000
  1892. [ 2.617391@2] get property: irq_in, value:3
  1893. [ 2.623054@2] get property: irq_out, value:5
  1894. [ 2.628808@2] get property: gpio_cd, str:
  1895. [ 2.634222@2] get property: pinname, str:sd
  1896. [ 2.639802@2] get property: jtag_pin, str:
  1897. [ 2.645237@2] get property: card_type, value:5
  1898. [ 2.650393@1] emmc: BKOPS_EN bit is not set
  1899. [ 2.655094@2] get property: gpio_dat3, str:
  1900. [ 2.656289@1] emmc: new high speed MMC card at address 0001
  1901. [ 2.657499@1] emmc: clock 50000000, 8-bit-bus-width
  1902. [ 2.657499@1]
  1903. [ 2.657499@1] mmcblk0: emmc:0001 HBG4a2 29.1 GiB
  1904. [ 2.657705@1] mmcblk0boot0: emmc:0001 HBG4a2 partition 1 4.00 MiB
  1905. [ 2.657831@1] mmcblk0boot1: emmc:0001 HBG4a2 partition 2 4.00 MiB
  1906. [ 2.657963@1] mmcblk0rpmb: emmc:0001 HBG4a2 partition 3 4.00 MiB
  1907. [ 2.659482@1] mmcblk0: unknown partition table
  1908. [ 2.660461@1] [mmc_read_partition_tbl] mmc read partition OK!
  1909. [ 2.660463@1] add_emmc_partition
  1910. [ 2.660984@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  1911. [ 2.661391@1] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  1912. [ 2.661959@1] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  1913. [ 2.662527@1] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  1914. [ 2.663089@1] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  1915. [ 2.663665@1] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  1916. [ 2.663938@1] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  1917. [ 2.664518@1] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  1918. [ 2.665075@1] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  1919. [ 2.665645@1] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  1920. [ 2.666209@1] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  1921. [ 2.666463@1] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  1922. [ 2.667028@1] [mmcblk0p13] data offset 0x0000b7400000, size 0x000690800000
  1923. [ 2.667076@1] card key: card_blk_probe.
  1924. [ 2.667084@1] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  1925. [ 2.667087@1] emmc key: emmc_key_init:552 ok.
  1926. [ 2.673531@1] amlmmc_dtb_init: register dtb chardev
  1927. [ 2.673532@1] calc d76acd16, store d76acd16
  1928. [ 2.679800@1] calc d76acd16, store d76acd16
  1929. [ 2.679802@1] total valid 2
  1930. [ 2.681118@1] amlmmc_dtb_init: register dtb chardev OK
  1931. [ 2.681119@1] Exit aml_emmc_partition_ops OK.
  1932. [ 2.683490@0] mmcblk0boot1: unknown partition table
  1933. [ 2.684585@0] mmcblk0boot0: unknown partition table
  1934. [ 2.684879@1] clear_emmc_wait_flag
  1935. [ 2.870799@2] sd:pdata->caps = 7
  1936. [ 2.873975@2] sd:pdata->caps2 = 0
  1937. [ 2.877230@2] sd:pdata->pm_caps = 0
  1938. [ 2.914276@4] [aml_is_card_insert] card OUT
  1939. [ 2.914502@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1940. [ 2.914562@4] [aml_is_card_insert] card OUT
  1941. [ 2.922786@2] aml_sd_emmc_probe: line 3608
  1942. [ 2.927542@2] aml_sd_emmc_reg_init 1152
  1943. [ 2.930672@2] get property: ocr_avail, value:0x00200080
  1944. [ 2.937115@2] get property: f_min, value:400000
  1945. [ 2.943195@2] get property: f_max, value:200000000
  1946. [ 2.949594@2] get property: max_req_size, value:0x00020000
  1947. [ 2.956055@2] get property: pinname, str:sdio
  1948. [ 2.961826@2] get property: card_type, value:3
  1949. [ 2.967586@2] sdio:pdata->caps = 7810f
  1950. [ 2.971227@2] sdio:pdata->caps2 = 0
  1951. [ 2.974705@2] sdio:pdata->pm_caps = 1
  1952. [ 3.013901@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1953. [ 3.014809@2] ion_dev has 1 memory regions
  1954. [ 3.018196@2] ion_dev ion_dev.21: assigned reserved memory node linux,ion-dev ok
  1955. [ 3.057541@2] ion_chunk_heap_create: base 3122659328 size 67108864 align 0
  1956. [ 3.075593@2] ion_carveout_heap_create: base 2063597568 size 83886080 align 0
  1957. [ 3.077933@2] fb: osd_init_module
  1958. [ 3.080525@2] fb: viu vsync irq: 35
  1959. [ 3.083895@2] fb: failed to init reserved memory
  1960. [ 3.088380@2] fb: osd_set_free_scale_mode_hw
  1961. [ 3.092616@2] fb: osd_probe vinfo:ffffffc0021492f0
  1962. [ 3.097361@2] fb: init fbdev bpp is:32
  1963. [ 3.101648@0] fb: set osd0 reverse as NONE
  1964. [ 3.118963@0] fb: osd probe OK
  1965. [ 3.119669@0] ge2d: ge2d_init_module
  1966. [ 3.119962@0] ge2d: ge2d_dev major:240
  1967. [ 3.124325@0] ge2d: vpu clock is 666660000 HZ
  1968. [ 3.127973@0] ge2d: ge2d clock is 400 MHZ
  1969. [ 3.131934@0] ge2d: ge2d: pdev=ffffffc0999a4a00, irq=182, rstc=0xffffffc098506c00, clk=ffffffc099998300
  1970. [ 3.141348@0] ge2d: mapped phy: 0xd0160000
  1971. [ 3.145306@0] ge2d: ge2d start monitor
  1972. [ 3.149073@1] ge2d: ge2d workqueue monitor start
  1973. [ 3.149368@2] sysled: module init
  1974. [ 3.149902@2] pwmled: module init
  1975. [ 3.149914@2] aml_ledlight_init!
  1976. [ 3.150218@0] codec:Amlogic A/V streaming port init
  1977. [ 3.152476@0] codec:get gate demux control ok ffffffc098487340
  1978. [ 3.152481@0] codec:get gate parser_top control ok ffffffc098487500
  1979. [ 3.152486@0] codeec:get gate vpu_intr control ok ffffffc0984877c0
  1980. [ 3.152492@0] codec:get gate vdec control ok ffffffc098487780
  1981. [ 3.153524@0] codec:[tsync_pcr_init]init success.
  1982. [ 3.153563@0] codec:amvideocap_init_module
  1983. [ 3.153733@0] codec:amvideocap_probe,amvideocap
  1984. [ 3.153737@0] codec:use cma buf.
  1985. [ 3.153739@0] codec:amvideocap_dev_register
  1986. [ 3.154572@2] codec:amvdec_mmpeg4 module init
  1987. [ 3.154981@0] ammvdec_h264 module init
  1988. [ 3.156727@0] amvenc_avc_probe -- reserved memory config fail.
  1989. [ 3.156731@0] amvenc_avc - cma memory pool size: 40 MB
  1990. [ 3.156759@0] encode_wq_init.
  1991. [ 3.156764@0] encode start monitor.
  1992. [ 3.156828@2] encode workqueue monitor start.
  1993. [ 3.157221@2] jpegenc module init
  1994. [ 3.157579@0] codec:picdec_driver_probe called.
  1995. [ 3.157584@0] picdec has 1 memory regions
  1996. [ 3.157625@0] codec:picdec_driver_probe done.
  1997. [ 3.158530@2] codec:vdec_request_irq ffffffc0017b1c50, vsync
  1998. [ 3.158802@0] codec:create_ge2d_work_queue video task ok
  1999. [ 3.159385@2] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr_phy b4450000 reg_buf ffffffc098b68000
  2000. [ 3.159389@2] rdma_register success, handle 3 table_size 32768
  2001. [ 3.159391@2] video_rdma:rdma_init video rdma handle = 3.
  2002. [ 3.159396@2] codec:used fix clk for vdec clk source!
  2003. [ 3.159401@2] codec:register clk_set_setting cpu[34]
  2004. [ 3.159989@2] vpu_init
  2005. [ 3.160193@2] vpu_probe
  2006. [ 3.160197@2] HevcEnc reserved memory config fail.
  2007. [ 3.160204@2] HevcEnc - cma memory pool size: 64 MB
  2008. [ 3.160206@2] HevcEnc - wave420l_irq: 219
  2009. [ 3.160261@2] vpu base address get from platform driver physical base addr=0xc8810000, virtual base=0xffffff80003d8000
  2010. [ 3.160636@2] success to probe vpu device with video memory from cma
  2011. [ 3.160973@0] DI: di_module_init ok.
  2012. [ 3.160978@0] DI: di_module_init: major 233
  2013. [ 3.161210@2] DI: di_probe
  2014. [ 3.161342@0] deinterlace has 1 memory regions
  2015. [ 3.161398@0] deinterlace deinterlace.25: assigned reserved memory node linux,di ok
  2016. [ 3.161402@0] DI-di_probe: get flag_cma error.
  2017. [ 3.161424@0] di_irq:78,timerc_irq:38
  2018. [ 3.161612@0] rdma_register, rdma_table_addr ffffff800019c000 rdma_table_addr_phy b444a000 reg_buf ffffffc09805c000
  2019. [ 3.161614@0] rdma_register success, handle 4 table_size 8192
  2020. [ 3.161616@0] DI: di_probe allocate rdma channel 4.
  2021. [ 3.161620@0] DI: DI hw version 2.
  2022. [ 3.161630@0] 0x000000db:Y=db,U=0,V=0
  2023. [ 3.161631@0] 0x000000dc:Y=dc,U=0,V=0
  2024. [ 3.161633@0] 0x000000dd:Y=dd,U=0,V=0
  2025. [ 3.161635@0] 0x000000de:Y=de,U=0,V=0
  2026. [ 3.161636@0] 0x000000df:Y=df,U=0,V=0
  2027. [ 3.161638@0] 0x000000e0:Y=e0,U=0,V=0
  2028. [ 3.161640@0] 0x000000e1:Y=e1,U=0,V=0
  2029. [ 3.161641@0] 0x000000e2:Y=e2,U=0,V=0
  2030. [ 3.161643@0] 0x000000e3:Y=e3,U=0,V=0
  2031. [ 3.161645@0] 0x000000f0:Y=f0,U=0,V=0
  2032. [ 3.161649@0] 0x000000f1:Y=f1,U=0,V=0
  2033. [ 3.161650@0] 0x000000f2:Y=f2,U=0,V=0
  2034. [ 3.161652@0] 0x000000f3:Y=f3,U=0,V=0
  2035. [ 3.161654@0] 0x000000f4:Y=f4,U=0,V=0
  2036. [ 3.161655@0] 0x000000f5:Y=f5,U=0,V=0
  2037. [ 3.161657@0] 0x000000f6:Y=f6,U=0,V=0
  2038. [ 3.161660@0] 0x000000f7:Y=f7,U=0,V=0
  2039. [ 3.161662@0] 0x000000f8:Y=f8,U=0,V=0
  2040. [ 3.161664@0] 0x000000f9:Y=f9,U=0,V=0
  2041. [ 3.161665@0] 0x000000fa:Y=fa,U=0,V=0
  2042. [ 3.161667@0] 0x000000fb:Y=fb,U=0,V=0
  2043. [ 3.161668@0] 0x000000fc:Y=fc,U=0,V=0
  2044. [ 3.161672@0] 0x000000fd:Y=fd,U=0,V=0
  2045. [ 3.161673@0] 0x000000fe:Y=fe,U=0,V=0
  2046. [ 3.161675@0] 0x000000ff:Y=ff,U=0,V=0
  2047. [ 3.161677@0] DI: support multi decoding 253~254~255.
  2048. [ 3.161755@0] DI: di_probe:Di use HRTIMER
  2049. [ 3.162227@2] efusekeynum: 4
  2050. [ 3.162235@2] efusekeyname: mac offset: 0 size: 6
  2051. [ 3.162241@2] efusekeyname: mac_bt offset: 6 size: 6
  2052. [ 3.162246@2] efusekeyname: mac_wifi offset: 12 size: 6
  2053. [ 3.162251@2] efusekeyname: usid offset: 18 size: 16
  2054. [ 3.162499@2] efuse efuse.10: probe OK!
  2055. [ 3.162883@0] key unify config unifykey-num is 14
  2056. [ 3.162926@0] key unify fact unifykey-num is 14
  2057. [ 3.162931@0] aml_unifykeys_probe:1280=============unifykey_devno:e700000
  2058. [ 3.163191@0] 6unifykey: device unifykeys created ok
  2059. [ 3.163333@2] 6aml_unifykeys_init done!
  2060. [ 3.163335@2] PPMGRDRV: warn: ppmgr module init func called
  2061. [ 3.163473@2] PPMGRDRV: err: ppmgr_driver_probe called
  2062. [ 3.163477@2] ppmgr has 1 memory regions
  2063. [ 3.163523@2] PPMGRDRV: info: ppmgr_dev major:230
  2064. [ 3.163764@2] PPMGRDRV: info: ppmgr_probe done
  2065. [ 3.164314@2] amlogic rfkill init
  2066. [ 3.164430@2] enter bt_probe of_node
  2067. [ 3.164454@2] not get gpio_en
  2068. [ 3.164460@2] power on valid level is high
  2069. [ 3.164460@2] bt: power_on_pin_OD = 0;
  2070. [ 3.164776@2] Bluetooth: BlueSleep Mode Driver Ver 1.2
  2071. [ 3.165357@2] ionvideo-000: V4L2 device registered as video13
  2072. [ 3.165478@0] ionvideo-001: V4L2 device registered as video14
  2073. [ 3.165594@2] ionvideo-002: V4L2 device registered as video15
  2074. [ 3.165711@0] ionvideo-003: V4L2 device registered as video16
  2075. [ 3.165830@2] ionvideo-004: V4L2 device registered as video17
  2076. [ 3.165944@0] ionvideo-005: V4L2 device registered as video18
  2077. [ 3.166060@2] ionvideo-006: V4L2 device registered as video19
  2078. [ 3.166173@0] ionvideo-007: V4L2 device registered as video20
  2079. [ 3.166281@2] ionvideo-008: V4L2 device registered as video21
  2080. [ 3.166283@2] ionvid: info: Video Technology Magazine Ion Video
  2081. [ 3.166285@2] ionvid: info: Capture Board ver 1.0 successfully loaded
  2082. [ 3.166300@2] audio_dsp: [dsp]register dsp to char divece(257)
  2083. [ 3.167014@0] amaudio: amaudio: driver amaudio succuess!
  2084. [ 3.167367@2] amlvid:info: amlvideo_init called
  2085. [ 3.167368@2] amlvid:info: amlvideo_create_instance called
  2086. [ 3.167372@2] amlvid:info: v4l2_dev.name=:amlvideo-000
  2087. [ 3.167521@0] amlvideo-000: V4L2 device registered as video10
  2088. [ 3.167907@0] vdin_drv_init: major 229
  2089. [ 3.168284@2] rdma_register, rdma_table_addr ffffff80001a9000 rdma_table_addr_phy b444c000 reg_buf ffffffc0980bc200
  2090. [ 3.168287@2] rdma_register success, handle 5 table_size 512
  2091. [ 3.168290@2] vdin_drv_probe:vdin.0 rdma hanld 5.
  2092. [ 3.168514@0]
  2093. [ 3.168514@0] vdin memory resource undefined!!
  2094. [ 3.168519@0] vdin0 cma_mem_size = 16 MB
  2095. [ 3.168523@0] vdin0 irq: 115 rdma irq: 2
  2096. [ 3.168566@0] vdin_drv_probe: fclk_div5 is 400 MHZ
  2097. [ 3.168588@0] vdin_drv_probe: vdin[0] clock is 50 MHZ
  2098. [ 3.168845@2] vdin_drv_probe: driver initialized ok
  2099. [ 3.169020@2] rdma_register, rdma_table_addr ffffff80001ab000 rdma_table_addr_phy b444d000 reg_buf ffffffc0980bc600
  2100. [ 3.169022@2] rdma_register success, handle 6 table_size 512
  2101. [ 3.169025@2] vdin_drv_probe:vdin.1 rdma hanld 6.
  2102. [ 3.169244@0] vdin1 has 1 memory regions
  2103. [ 3.169291@0] vdin vdin1.27: assigned reserved memory node linux,vdin1_cma ok
  2104. [ 3.169292@0]
  2105. [ 3.169292@0] vdin memory resource done.
  2106. [ 3.169298@0] vdin1 cma_mem_size = 16 MB
  2107. [ 3.169302@0] vdin1 irq: 117 rdma irq: 4
  2108. [ 3.169329@0] vdin_drv_probe: fclk_div5 is 400 MHZ
  2109. [ 3.169337@0] vdin_drv_probe: vdin[1] clock is 50 MHZ
  2110. [ 3.169583@2] vdin_drv_probe: driver initialized ok
  2111. [ 3.169778@0] vdin_drv_init: vdin driver init done
  2112. [ 3.169785@0] tvafe_drv_init: major 228
  2113. [ 3.170172@0] tvafe: tvafe_init.
  2114. [ 3.170500@0] vbi: vbi_init.
  2115. [ 3.171026@2] [RX]-hdmirx: hdmirx_init.
  2116. [ 3.171031@2] ESM HLD: Initializing...
  2117. [ 3.171033@2] ESM HLD: Registering device range 'esm_rx'...
  2118. [ 3.171039@2] ESM HLD: Device range 'esm_rx' has been registered.
  2119. [ 3.171041@2] ESM HLD: Creating class /sys/class/elliptic_rx...
  2120. [ 3.171117@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
  2121. [ 3.171119@0] ESM HLD: Creating device 'esm_rx'...
  2122. [ 3.171241@2] ESM HLD: Device 'esm_rx' has been created.
  2123. [ 3.171242@2] ESM HLD: Done initializing the HLD driver.
  2124. [ 3.171244@2] amvdec_656in module: init.
  2125. [ 3.171247@2] amvdec_656in_init_module. 1 hardware detected!.
  2126. [ 3.171251@2] amvdec_656in_init_module:major 225
  2127. [ 3.171451@0] amvdec_656in_probe:start probe .
  2128. [ 3.171457@0] amvdec_656in_probe: bt656 devp->index =0
  2129. [ 3.171497@0] amvdec_656in_probe: bt656[0] clock is 333 MHZ
  2130. [ 3.171642@2] amvdec_656in_probe:bt656[0]start get ioremap .
  2131. [ 3.171659@2] amvdec_656in_probe: bt656[0] maped reg_base =ffffff80001ae000, size=7c
  2132. [ 3.171661@2] amvdec_656in_probe: tvin_frontend_init done :0
  2133. [ 3.171668@2] amvdec_656in probe ok.
  2134. [ 3.171685@2] amvdec_656in_probe:start probe .
  2135. [ 3.171688@2] amvdec_656in_probe: bt656 devp->index =1
  2136. [ 3.171711@2] amvdec_656in_probe: bt656[1] clock is 333 MHZ
  2137. [ 3.171841@0] amvdec_656in_probe:bt656[1]start get ioremap .
  2138. [ 3.171854@0] amvdec_656in_probe: bt656[1] maped reg_base =ffffff80001ba000, size=7c
  2139. [ 3.171856@0] amvdec_656in_probe: tvin_frontend_init done :1
  2140. [ 3.171863@0] amvdec_656in probe ok.
  2141. [ 3.172031@2] amvdec_656in_init_module: bt656 driver init done
  2142. [ 3.172035@2] [viuin..]viuin_init_module viuin module init
  2143. [ 3.172496@2] [viuin..]viuin_probe probe ok.
  2144. [ 3.172576@0] aml_vecm_init:module init
  2145. [ 3.172720@0]
  2146. [ 3.172720@0] VECM probe start
  2147. [ 3.173014@0] Can't find wb_sel.
  2148. [ 3.173019@0] dolby_vision_init_receiver(dvel)
  2149. [ 3.173026@0] dolby_vision_init_receiver: dvel
  2150. [ 3.173210@0] aml_vecm_probe: ok
  2151. [ 3.174101@2] saradc c1108680.saradc: initialized by BL30
  2152. [ 3.174112@2] saradc c1108680.saradc: calibration start:
  2153. [ 3.174159@2] saradc c1108680.saradc: nominal=0, value=6
  2154. [ 3.174207@2] saradc c1108680.saradc: nominal=256, value=231
  2155. [ 3.174253@2] saradc c1108680.saradc: nominal=512, value=460
  2156. [ 3.174299@2] saradc c1108680.saradc: nominal=768, value=690
  2157. [ 3.174345@2] saradc c1108680.saradc: nominal=1023, value=919
  2158. [ 3.174348@2] saradc c1108680.saradc: calibration end: coef=4568
  2159. [ 3.174591@0] remote: Driver init
  2160. [ 3.174692@0] remote: cant find match item for remote_ao_offset
  2161. [ 3.174704@0] meson-remote: probe of c8100580.rc failed with error -1
  2162. [ 3.175267@0] gpio-key gpio_keypad.51: gpio_key: 0 name(power) pin()
  2163. [ 3.175271@0] gpio-key gpio_keypad.51: amlogic_gpio_name_map_num pin 0!::
  2164. [ 3.175293@0] gpio-key gpio_keypad.51: gpio_key: 0 power(147)
  2165. [ 3.175328@0] gpio-key gpio_keypad.51: start setup_timer
  2166. [ 3.175336@0] gpio-key gpio_keypad.51: power key(303) registed.
  2167. [ 3.175573@2] input: gpio_keypad as /devices/gpio_keypad.51/input/input0
  2168. [ 3.175715@0] gpio-key gpio_keypad.51: gpio keypad register input device completed.
  2169. [ 3.175724@0] input input0: gpio keypad major:223
  2170. [ 3.177060@2] Sensor: lsm303d_init
  2171. [ 3.177303@0] Sensor: stk8313_init
  2172. [ 3.177389@2] Sensor: stk831x_init
  2173. [ 3.177471@0] Sensor: mxc622x_acc_init
  2174. [ 3.177553@2] Sensor: mxc6255xc_acc_init
  2175. [ 3.177718@2] Sensor: l3gd20_gyr_init
  2176. [ 3.178810@2] aml dvb init
  2177. [ 3.179288@2] Amlogic Demod DVB-T/C DebugIF Init
  2178. [ 3.179492@2] Amlogic Demod DVB-T/C DebugIF Init ok----------------
  2179. [ 3.181556@0] jtag: module init
  2180. [ 3.181790@2] jtag: pinctrl setup apao
  2181. [ 3.181793@2] jtag: set state 2
  2182. fuse_pw_en: 0x3
  2183.  
  2184. WARNING! efuse bits is disabled
  2185.  
  2186. Enable A53 JTAG cluster 0 to AO
  2187.  
  2188. [ 4.156484@0] HDR: clr bt2020
  2189. [ 4.156685@0] input input0: key 303 up
  2190. [ 4.157578@0] jtag: module probed ok
  2191. [ 4.162815@0] defendkey c8834500.defendkey: defendkey_devno:da00000
  2192. [ 4.168106@0] defendkey c8834500.defendkey: defendkey: device defendkey created ok
  2193. [ 4.174884@0] hdmitx: system: irq 80000001
  2194. [ 4.179014@0] Start = 0x10000100 End = 0x100001ff
  2195. [ 4.183689@0] [0x10000102]: 0x00000004
  2196. [ 4.187623@0] [0x10000104]: 0x00000001
  2197. [ 4.188020@2] defendkey: driver init
  2198. [ 4.188858@3] input: cec_input as /devices/virtual/input/input1
  2199. [ 4.189112@3] cectx aocec: no hdmirx reg resource
  2200. [ 4.189115@3] cectx aocec: no hhi reg resource
  2201. [ 4.189124@3] cec: wake up flag:0
  2202. [ 4.191123@3] aml_aes_dma c883e000.aml_aes: Aml AES_dma
  2203. [ 4.191724@3] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
  2204. [ 4.192406@3] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma
  2205. [ 4.193059@3] usbcore: registered new interface driver snd-usb-audio
  2206. [ 4.194801@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  2207. [ 4.196987@3] aml-i2s-dai I2S.43: I2S Mic is in platform!
  2208. [ 4.197347@3] aml_pcm_dai: pcm mode detection =1
  2209. [ 4.197718@3] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  2210. [ 4.197740@3] aml_spdif_dai: set normal 512 fs /4 fs
  2211. [ 4.197742@3] aml_spdif_dai: set 958 audio clk div 4
  2212. [ 4.197749@3] aml_audio_hw: IEC958 16bit
  2213. [ 4.197753@3] hdmitx: audio: aout notify rate 48000
  2214. [ 4.197755@3] hdmitx: audio: aout notify size 16
  2215. [ 4.197757@3] hdmitx: audio: aout notify format CT_PCM
  2216. [ 4.197760@3] hdmtix: set audio
  2217. [ 4.197773@3] hdmitx tx_aud_src = 0
  2218. [ 4.197793@3] hdmitx: fs = 3, cd = 4, tmds_clk = 594000
  2219. [ 4.197795@3] hdmitx aud_n_para = 6144
  2220. [ 4.197856@3] hdmitx: audio: Audio Type: PCM
  2221. [ 4.197858@3] hdmitx: audio: set audio param
  2222. [ 4.198718@3] aml_snd_card: aml_multi_dev_parse_of ...
  2223. [ 4.198722@3] aml_snd_card: no multi dev!
  2224. [ 4.321957@0] [0x10000105]: 0x00000002
  2225. [ 4.324896@0] [0x10000170]: 0x00000020
  2226. [ 4.328501@0] [0x10000180]: 0x000000ff
  2227. [ 4.332206@0] [0x10000181]: 0x000000ff
  2228. [ 4.335964@0] [0x10000182]: 0x00000003
  2229. [ 4.339616@0] [0x10000183]: 0x00000007
  2230. [ 4.343331@0] [0x10000184]: 0x0000003f
  2231. [ 4.347065@0] [0x10000185]: 0x00000002
  2232. [ 4.350743@0] [0x10000187]: 0x000000ff
  2233. [ 4.354490@0] [0x10000188]: 0x00000003
  2234. [ 4.404080@3] aml_snd_card: headphone detection disable=1
  2235. [ 4.404128@3] aml_snd_card: no spk event delay time set
  2236. [ 4.410088@3] aml_snd_m8_card aml_m8_snd.50: T9015-audio-hifi <-> I2S.43 mapping ok
  2237. [ 4.417435@3] aml_snd_m8_card aml_m8_snd.50: dit-hifi <-> SPDIF.44 mapping ok
  2238. [ 4.423832@3] aml_pcm: enter aml_pcm_new dai->name: PCM.45 dai->id: 0
  2239. [ 4.430252@3] aml_snd_m8_card aml_m8_snd.50: pcm2bt-pcm <-> PCM.45 mapping ok
  2240. [ 4.437177@3] aml_snd_m8_card aml_m8_snd.50: ASoC: no source widget found for LOUTL
  2241. [ 4.444745@3] aml_snd_m8_card aml_m8_snd.50: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  2242. [ 4.453529@3] aml_snd_m8_card aml_m8_snd.50: ASoC: no source widget found for LOUTR
  2243. [ 4.461124@3] aml_snd_m8_card aml_m8_snd.50: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  2244. [ 4.472033@0] GACT probability NOT on
  2245. [ 4.473549@0] Mirror/redirect action on
  2246. [ 4.477351@0] u32 classifier
  2247. [ 4.480177@0] Actions configured
  2248. [ 4.483732@0] Netfilter messages via NETLINK v0.30.
  2249. [ 4.488705@0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  2250. [ 4.495363@3] ctnetlink v0.93: registering with nfnetlink.
  2251. [ 4.500775@3] xt_time: kernel timezone is -0000
  2252. [ 4.504812@3] ipip: IPv4 over IPv4 tunneling driver
  2253. [ 4.510334@3] ip_tables: (C) 2000-2006 Netfilter Core Team
  2254. [ 4.515094@3] arp_tables: (C) 2002 David S. Miller
  2255. [ 4.520516@3] TCP: cubic registered
  2256. [ 4.523130@3] Initializing XFRM netlink socket
  2257. [ 4.528530@0] NET: Registered protocol family 10
  2258. [ 4.533347@3] mip6: Mobile IPv6
  2259. [ 4.535274@3] ip6_tables: (C) 2000-2006 Netfilter Core Team
  2260. [ 4.543385@3] sit: IPv6 over IPv4 tunneling driver
  2261. [ 4.546982@3] NET: Registered protocol family 17
  2262. [ 4.550091@3] NET: Registered protocol family 15
  2263. [ 4.557214@3] Bridge firewalling registered
  2264. [ 4.558871@3] Bluetooth: RFCOMM TTY layer initialized
  2265. [ 4.563775@3] Bluetooth: RFCOMM socket layer initialized
  2266. [ 4.569092@3] Bluetooth: RFCOMM ver 1.11
  2267. [ 4.572907@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2268. [ 4.578345@3] Bluetooth: BNEP filters: protocol multicast
  2269. [ 4.583697@3] Bluetooth: BNEP socket layer initialized
  2270. [ 4.589218@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2271. [ 4.594838@3] Bluetooth: HIDP socket layer initialized
  2272. [ 4.599964@3] l2tp_core: L2TP core driver, V2.0
  2273. [ 4.604395@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  2274. [ 4.609294@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  2275. [ 4.615121@3] l2tp_netlink: L2TP netlink interface
  2276. [ 4.619771@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  2277. [ 4.625816@3] l2tp_debugfs: L2TP debugfs support
  2278. [ 4.630338@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  2279. [ 4.636956@3] NET: Registered protocol family 35
  2280. [ 4.641540@3] Key type dns_resolver registered
  2281. [ 4.647672@3] Registering SWP/SWPB emulation handler
  2282. [ 4.651654@3] Loading compiled-in X.509 certificates
  2283. [ 4.655835@3] regulator-dummy: disabling
  2284. [ 4.660209@3] aml_vrtc rtc.33: setting system clock to 2015-01-01 00:00:07 UTC (1420070407)
  2285. [ 4.670427@0] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
  2286. [ 4.673781@0] gxbb_pm: enter meson_pm_probe!
  2287. [ 4.677785@0] gxbb_pm: meson_pm_probe done
  2288. [ 4.682834@0] cpucore_cooling_register, max_cpu_core_num:4
  2289. [ 4.687640@0] cpucore_cooling_register, max_cpu_core_num:4
  2290. [ 4.708428@0] aml_istbt_dev_ready NULL
  2291. [ 4.70849R 4.713222@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  2292. [ 4.716894@0] Freeing unused kernel memory: 1300K (ffffffc001f48000 - ffffffc00208d000)
  2293. [ 4.744017@0] init: init first stage started!
  2294. [ 4.879598@6] audit: type=1403 audit(1420070407.710:2): policy loaded auid=4294967295 ses=4294967295
  2295. [ 4.884155@6] init: (Initializing SELinux non-enforcing took 0.14s.)
  2296. [ 4.894154@6] init: init second stage started!
  2297. [ 4.902387@6] init: Running restorecon...
  2298. [ 4.998763@1] init: waitpid failed: No child processes
  2299. [ 4.999141@1] init: (Loading properties from /default.prop took 0.00s.)
  2300. [ 5.007728@1] init: (Parsing /init.environ.rc took 0.00s.)
  2301. [ 5.010929@1] init: (Parsing /init.usb.rc took 0.00s.)
  2302. [ 5.016624@1] init: /init.amlogic.rc: 272: chmod requires 2 arguments
  2303. [ 5.023901@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
  2304. [ 5.028368@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
  2305. [ 5.033124@1] init: (Parsing init.amlogic.board.rc took 0.01s.)
  2306. [ 5.039827@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
  2307. [ 5.044712@1] init: (Parsing init.amlogic.wifi.rc took 0.01s.)
  2308. [ 5.050491@1] init: could not import file 'init.mtk.rc' from '/init.amlogic.rc': No such file or directory
  2309. [ 5.060049@1] init: (Parsing /init.amlogic.rc took 0.04s.)
  2310. [ 5.066505@1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  2311. [ 5.071497@1] init: (Parsing /init.zygote32.rc took 0.00s.)
  2312. [ 5.076920@1] init: (Parsing /init.rc took 0.07s.)
  2313. [ 5.081640@1] init: aml-firstboot-init insert aml-firstboot-init
  2314. [ 5.088202@1] init: Starting service 'ueventd'...
  2315. [ 5.093656@1] init: insmod: open("/boot/optee.ko") failed: No such file or directory[ 5.096267@0] ueventd: ueventd started!
  2316. [ 5.098820@0] ueventd: coldboot /sys/class
  2317. [ 5.102139@0] ueventd: coldboot /sys/block
  2318. [ 5.102188@0] ueventd: coldboot /sys/devices/virtual/tty/console
  2319. [ 5.105538@0] ueventd: coldboot /sys/devices/virtual/tty/tty
  2320. [ 5.106520@0] ueventd: coldboot /sys/devices/virtual/tty/ptmx
  2321. [ 5.107465@0] ueventd: coldboot /sys/devices
  2322.  
  2323. [ 5.133195@1] init: insmod: open("/boot/optee_armtz.ko") failed: No such file or directoryueventd: Coldboot took 0.31s.
  2324. [ [ 5.415954@4] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  2325. [ 5.416672@3] audit: type=1400 audit(1420070408.250:3): avc: denied { relabelfrom } for pid=3106 comm="ueventd" name="tty" dev="tmpfs" ino=58 scontext=u:r:ueventd:s0 tcontext=u:object_r:owntty_device:s0 tclass=chr_file permissive=1
  2326. [ 5.416694@3] audit: type=1400 audit(1420070408.250:4): avc: denied { relabelto } for pid=3106 comm="ueventd" name="tty" dev="tmpfs" ino=58 scontext=u:r:ueventd:s0 tcontext=u:object_r:owntty_device:s0 tclass=chr_file permissive=1
  2327. [ 5.417542@3] audit: type=1400 audit(1420070408.250:5): avc: denied { relabelfrom } for pid=3106 comm="ueventd" name="ptmx" dev="tmpfs" ino=59 scontext=u:r:ueventd:s0 tcontext=u:object_r:ptmx_device:s0 tclass=chr_file permissive=1
  2328. [ 5.417563@3] audit: type=1400 audit(1420070408.250:6): avc: denied { relabelto } for pid=3106 comm="ueventd" name="ptmx" dev="tmpfs" ino=59 scontext=u:r:ueventd:s0 tcontext=u:object_r:ptmx_device:s0 tclass=chr_file permissive=1
  2329. [ 5.427776@1] audit: type=1400 audit(1420070408.260:7): avc: denied { relabelfrom } for pid=3106 comm="ueventd" name="console" dev="tmpfs" ino=57 scontext=u:r:ueventd:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1
  2330. [ 5.427799@1] audit: type=1400 audit(1420070408.260:8): avc: denied { relabelto } for pid=3106 comm="ueventd" name="console" dev="tmpfs" ino=57 scontext=u:r:ueventd:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1
  2331. [ 5.977023@0] ueventd: Coldboot tty took 0.56s.
  2332. [ 6.127257@3] fb: afbc: 1
  2333. [ 6.127907@3] init: enter do_confirm_formated /dev/block/tee, /tee
  2334. [ 6.130396@3] init: blocksize 1024, bytes_per_inode 1024
  2335. [ 6.135681@3] init: do_confirm_formated ext4 try mount
  2336. [ 6.146254@3] EXT4-fs (mmcblk0p8): VFS: Can't find ext4 filesystem
  2337. [ 6.146994@3] init: do_confirm_formated mount fail,maybe firstboot, need format, try format now, dev:/dev/block/tee, mountpoint:/tee
  2338. [ 6.257738@6] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  2339. [ 6.316631@6] init: enter do_confirm_formated /dev/block/data, /data
  2340. [ 6.317367@6] init: do_confirm_formated ext4 try mount
  2341. [ 6.323967@7] EXT4-fs (mmcblk0p13): VFS: Can't find ext4 filesystem
  2342. [ 6.328837@7] init: do_confirm_formated mount fail,maybe firstboot, need format, try format now, dev:/dev/block/data, mountpoint:/data
  2343. [ 8.852315@0] random: nonblocking pool is initialized
  2344. [ 11.768576@1] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  2345. [ 11.807542@1] init: enter do_confirm_formated /dev/block/cache, /cache
  2346. [ 11.808444@1] init: do_confirm_formated ext4 try mount
  2347. [ 11.814205@1] EXT4-fs (mmcblk0p3): VFS: Can't find ext4 filesystem
  2348. [ 11.819751@1] init: do_confirm_formated mount fail,maybe firstboot, need format, try format now, dev:/dev/block/cache, mountpoint:/cache
  2349. [ 12.167862@4] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  2350. [ 12.212005@5] fs_mgr: only system!, ignore mount_point:/misc
  2351. [ 12.215768@2] EXT4-fs (mmcblk0p12): INFO: recovery required on readonly filesystem
  2352. [ 12.219542@2] EXT4-fs (mmcblk0p12): write access will be enabled during recovery
  2353. [ 12.235781@2] EXT4-fs (mmcblk0p12): recovery complete
  2354. [ 12.236238@2] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
  2355. [ 12.243649@2] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
  2356. [ 12.251142@2] fs_mgr: only system!, ignore mount_point:/cache
  2357. [ 12.256698@2] fs_mgr: only system!, ignore mount_point:/data
  2358. [ 12.262289@2] fs_mgr: only system!, ignore mount_point:/swap_zram0
  2359. [ 12.268420@2] fs_mgr: only system!, ignore mount_point:/tee
  2360. [ 12.288980@3] fs_mgr: ignore system!, ignore mount_point:/system
  2361. [ 12.291722@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  2362. [ 12.301227@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2363. [ 12.307198@0] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0: Success
  2364. [ 12.375741@7] fs_mgr: check_fs(): unmount(/cache) succeeded
  2365. [ 12.376103@7] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
  2366. [ 12.430897@0] accelerate: old buffer is: 1408
  2367. [ 12.513608@4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  2368. [ 12.513608@4]
  2369. [ 12.514424@4] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  2370. [ 12.514424@4]
  2371. [ 12.521921@4] e2fsck: Pass 2: Checking directory structure
  2372. [ 12.521921@4]
  2373. [ 12.529005@4] e2fsck: Pass 3: Checking directory connectivity
  2374. [ 12.529005@4]
  2375. [ 12.536346@4] e2fsck: Pass 4: Checking reference counts
  2376. [ 12.536346@4]
  2377. [ 12.543138@4] e2fsck: Pass 5: Checking group summary information
  2378. [ 12.543138@4]
  2379. [ 12.550756@4] e2fsck: /dev/block/cache: 11/32768 files (0.0% non-contiguous), 4206/131072 blocks
  2380. [ 12.550756@4]
  2381. [ 12.562738@2] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  2382. [ 12.570014@2] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2383. [ 12.579270@2] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
  2384. [ 12.586956@2] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  2385. [ 12.598730@2] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2386. [ 12.604299@2] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0: Success
  2387. [ 12.636262@2] fs_mgr: check_fs(): unmount(/data) succeeded
  2388. [ 12.636331@2] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
  2389. [ 13.317283@4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  2390. [ 13.317283@4]
  2391. [ 13.318036@4] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  2392. [ 13.318036@4]
  2393. [ 13.325648@4] e2fsck: Pass 2: Checking directory structure
  2394. [ 13.325648@4]
  2395. [ 13.332671@4] e2fsck: Pass 3: Checking directory connectivity
  2396. [ 13.332671@4]
  2397. [ 13.340012@4] e2fsck: Pass 4: Checking reference counts
  2398. [ 13.340012@4]
  2399. [ 13.346825@4] e2fsck: Pass 5: Checking group summary information
  2400. [ 13.346825@4]
  2401. [ 13.354496@4] e2fsck: Block bitmap differences: +(557056--557060) +557062 +557065 +(557067--557069) +(557071--557072) +557074 +(557077--557095) +(557099--557103) +(557105--557106) +557108 +(557111--557248) +(557250--557280) +(557282--557326) +(557328--557358) +(557360--557380) +(557389--557488) +557490 +(557492--557503) +(557506--557507) +557509 +557511 +557516 +(557521--557536) +(557538--557567) -557664 -(557728--557729) -557731 -557768 -557776 -557780 -557782 -(557794--557796) -557825 -557830 -(557856--557857) -55e2fsck: Fix? yes
  2402.  
  2403. [ 13.401409@0] e2fsck:
  2404. [ 13.401409@0]
  2405. [ 13.405418@0] e2fsck:
  2406. [ 13.405418@0]
  2407. [ 13.409344@0] e2fsck: /dev/block/data: ***** FILE SYSTEM WAS MODIFIED *****
  2408. [ 13.409344@0]
  2409. [ 13.417898@0] e2fsck: /dev/block/data: 11/1721760 files (0.0% non-contiguous), 152100/6883072 blocks
  2410. [ 13.417898@0]
  2411. [ 13.428630@0] e2fsck: e2fsck terminated by exit(1)
  2412. [ 13.428630@0]
  2413. [ 13.436654@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  2414. [ 13.444775@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2415. [ 13.453407@0] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
  2416. [ 13.462535@0] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
  2417. [ 13.469758@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2418. [ 13.478041@0] fs_mgr: check_fs(): mount(/dev/block/tee,/tee,ext4)=0: Success
  2419. [ 13.536838@0] fs_mgr: check_fs(): unmount(/tee) succeeded
  2420. [ 13.536914@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/tee
  2421. [ 13.635391@7] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  2422. [ 13.635391@7]
  2423. [ 13.636141@7] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  2424. [ 13.636141@7]
  2425. [ 13.643728@7] e2fsck: Pass 2: Checking directory structure
  2426. [ 13.643728@7]
  2427. [ 13.650807@7] e2fsck: Pass 3: Checking directory connectivity
  2428. [ 13.650807@7]
  2429. [ 13.658143@7] e2fsck: Pass 4: Checking reference counts
  2430. [ 13.658143@7]
  2431. [ 13.665002@0] e2fsck: Pass 5: Checking group summary information
  2432. [ 13.665002@0]
  2433. [ 13.672557@0] e2fsck: /dev/block/tee: 11/8192 files (0.0% non-contiguous), 3111/8192 blocks
  2434. [ 13.672557@0]
  2435. [ 13.689284@0] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
  2436. [ 13.700753@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2437. [ 13.706598@0] fs_mgr: __mount(source=/dev/block/tee,target=/tee,type=ext4)=0
  2438. [ 13.715557@6] init: here: 1, 1 mount_mode:512
  2439. [ 13.786272@6] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
  2440. [ 13.802565@6] init: cannot find '/system/bin/tee-supplicant' (No such file or directory), disabling 'tee_supplicant'
  2441. [ 13.815853@2] init: /recovery not specified in fstab
  2442. [ 13.820406@2] init: do_start: Service debuggerd64 not found
  2443. [ 13.835052@1] logd.auditd: start
  2444. [ 13.835127@1] logd.klogd: 13761303796
  2445. [ 13.981098@0] dig: dig start!
  2446. [ 14.046362@2] init: decode_uid: Unable to find UID for 'pppoe'. Returning UINT_MAX
  2447. [ 14.048736@2] init: decode_uid: Unable to find UID for 'pppoe'. Returning UINT_MAX
  2448. [ 14.375652@4] mali_kbase: unknown parameter 'mali_debug_level' ignored
  2449. [ 14.376548@4] mali_kbase: unknown parameter 'mali_shared_mem_size' ignored
  2450. [ 14.386928@7] ftrace: Allocated trace_printk buffers
  2451. [ 14.388525@7] mali d00c0000.t82x: Continuing without Mali regulator control
  2452. [ 14.395300@7] mali d00c0000.t82x: set min pp to default 1
  2453. [ 14.400519@7] mali d00c0000.t82x: set min clk default to 0
  2454. [ 14.406062@7] mali d00c0000.t82x: dvfs table is 5
  2455. [ 14.410610@7] mali d00c0000.t82x: dvfs table addr ffffffc08faf6a18, ele size=48
  2456. [ 14.417921@0] mali d00c0000.t82x: max clk set 3
  2457. [ 14.422376@0] mali d00c0000.t82x: turbo clk set to 4
  2458. [ 14.427277@0] mali d00c0000.t82x: default clk set to 1
  2459. [ 14.432486@0] mali_plat=ffffffbffc04b240
  2460. [ 14.436966@0] gpu cooling register okay with err=0
  2461. [ 14.441181@0] gpu core cooling register okay with err=0
  2462. [ 14.446430@0] gpu_power_main, 63
  2463. [ 14.449598@0] hrtimer: interrupt took 13917 ns
  2464. [ 14.453985@1] mali d00c0000.t82x: GPU identified as 0x0820 r1p0 status 0
  2465. [ 14.461445@0] mali d00c0000.t82x: Probed as mali0
  2466. [ 14.465737@0] init: insmod: open("/system/lib/dovi.ko") failed: No such file or directory
  2467. [ 14.497717@0] binder: 4108:4108 transaction failed 29189, size 0-0
  2468. [ 14.499839@1] type=1400 audit(1420070417.330:9): avc: denied { getattr } for pid=4110 comm="hdmi_cec" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:hdmi_cec:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2469. [ 14.518093@7] init: insmod: open("/system/lib/aml_thermal.ko") failed: No such file or directory
  2470. [ 14.518093@7] logd.daemon: reinit
  2471. [ 14.519170@1] type=1400 audit(1420070417.330:10): avc: denied { getattr } for pid=4109 comm="systemcontrol" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:system_control:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2472. [ 14.524566@0] ddr_window,module_VER_:2017-03-18-11-13
  2473. [ 14.533733@2] binder: 4110:4110 transaction failed 29189, size 0-0
  2474. [ 14.540885@0] xpad: module is already loaded
  2475. [ 14.584022@0] init: finit_module for "/system/lib/xpad.ko" failed: Invalid argumentinit: insmod: open("/system/lib/hidps3remote.ko") failed: No such file or directoryinit: insmod: open("/system/lib/hidpt7.ko") failed: No such file or directoryinit: insmod: open("/system/lib/hidsony.ko") failed: No such file or directory
  2476. [ 14.610119@0] type=1400 audit(1420070417.440:11): avc: denied { open } for pid=4109 comm="systemcontrol" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=10260 scontext=u:r:system_control:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
  2477. [ 14.612884@2] amlkey_init() enter!
  2478. [ 14.636505@0] type=1400 audit(1420070417.440:12): avc: denied { getattr } for pid=4109 comm="systemcontrol" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=10260 scontext=u:r:system_control:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
  2479. [ 14.662429@2] emmc_key_read:428, read ok
  2480. [ 14.666021@2] amlkey_init() storagekey_info.buffer=ffffff8001900000, storagekey_info.size = 40000!
  2481. [ 14.668596@1] set hdcp_pwr 1
  2482. [ 14.679241@2] vfm_map_store:rm default
  2483. [ 14.681459@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  2484. [ 14.688423@2] init: property_set("ro.radio.noril", "true") failed
  2485. [ 14.694832@2] fb: afbc: 1
  2486. [ 14.697395@2] init: Service installxbmc does not have a SELinux domain defined.
  2487. [ 14.707932@2] init: Service fastinstall does not have a SELinux domain defined.
  2488. [ 14.708230@0] type=1400 audit(1420070417.540:13): avc: denied { execute_no_trans } for pid=4122 comm="init" path="/system/bin/installxbmc.sh" dev="mmcblk0p12" ino=215 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  2489. [ 14.714602@6] restore hdcp_pwr 0
  2490. [ 14.716819@6] hdmitx: set frac_rate_policy as 0
  2491. [ 14.717088@6] sname = 2160p60hz
  2492. [ 14.717092@6] char_clk = 594000
  2493. [ 14.717093@6] cd = 5
  2494. [ 14.717094@6] cs = 3
  2495. [ 14.717099@6] RX tmds clk: 600 Calc clk: 371
  2496. [ 14.717360@6] vout_serve: vmode set to null
  2497. [ 14.717400@6] fb: current vmode=2160p60hz, cmd: 0x50000
  2498. [ 14.717411@6] tv_vout: tv_set_current_vmode[925]fps_target_mode=88
  2499. [ 14.717416@6] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
  2500. [ 14.717431@6] tv_vout: 3Invalid video output modes.
  2501. [ 14.717434@6] tv_vout: new mode =null set ok
  2502. [ 14.717436@6] vout_serve: vinfo mode is: null
  2503. [ 14.717438@6] vout_serve: new mode null set ok
  2504. [ 14.717452@6] hdmitx: edid: not find mapped vic
  2505. [ 14.717456@6] hdmitx: video: get current mode: null
  2506. [ 14.717459@6] hdmitx: update physcial size: 1210 680
  2507. [ 14.717461@6] hdmitx: video: null not valid hdmi mode
  2508. [ 14.717491@6] fb: current vmode=null, cmd: 0x10000
  2509. [ 14.823746@2] init: Service xbmc_addons does not have a SELinux domain defined.
  2510. [ 14.835510@2] init: cannot find '/system/bin/tee-supplicant' 40790@6] vout_serve: vmode set to 2160p60hz
  2511. [ 14.841064@6] vout_serve: disable HDMI PHY as soon as possible
  2512. [ 14.845257@6] android_usb: Cannot enable 'adb' (-22)
  2513. [ 14.845257@6] fb: current vmode=null, cmd: 0x50000
  2514. [ 14.845829@2] android_usb: Cannot enable 'adb' (-22)
  2515. [ 14.848468@7] android_usb: Cannot enable 'adb' (-22)init: Service sud does not have a SELinux domain defined.
  2516. [ 14.869611@6] tv_vout: tv_set_current_vmode[925]fps_target_mode=35
  2517. [ 14.875717@0] tv_vout: mode is 35,sync_duration_den=1,sync_duration_num=60
  2518. [ 14.882519@0] tv_vout: 3tvinfo 35 not find
  2519. [ 14.886967@0] tv_vout: new mode =2160p60hz set ok
  2520. [ 14.891275@0] vout_serve: vinfo mode is: 2160p60hz
  2521. [ 14.896087@0] vout_serve: new mode 2160p60hz set ok
  2522. [ 14.900882@0] hdmitx: video: get current mode: 2160p60hz
  2523. [ 14.903944@1] type=1400 audit(1420070417.730:14): avc: denied { write } for pid=4140 comm="setprop" name="property_service" dev="tmpfs" ino=3111 scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  2524. [ 14.904409@1] type=1400 audit(1420070417.730:15): avc: denied { connectto } for pid=4140 comm="setprop" path="/dev/socket/property_service" scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
  2525. [ 14.946801@0] hdmitx: update rx hdr info 5
  2526. [ 14.950688@0] hdmitx: update physcial size: 1210 680
  2527. [ 14.955692@0] hdmitx: system: already init VIC = 0 Now VIC = 353
  2528. [ 14.962557@6] type=1400 audit(1420070417.790:16): avc: denied { create } for pid=4139 comm="sud" name="server" scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=sock_file permissive=1
  2529. [ 14.963655@0] hdmitx: system: hdmirx version is 2.0
  2530. [ 14.963659@0] hdmitx div40: 1
  2531. [ 14.966567@1] init: avc: denied { set } for property=dev.xbmc.addon pid=4140 uid=0 gid=0 scontext=u:r:toolbox:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1
  2532. [ 14.966850@1] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)'
  2533. [ 14.966909@1] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
  2534. [ 14.983452@1] init: Service ddrtest does not have a SELinux domain defined.
  2535. [ 14.983902@2] hdmitx: system: set mode VIC 353 (cd0,cs0,pm1,vd0,1)
  2536. [ 14.983906@2] hdmitx: system: set pll VIC:353
  2537. [ 14.983910@2] hdmitx: set clk: VIC = 353 cd = 5 frac_rate = 0
  2538. [ 14.983925@2] config HPLL = 3712500
  2539. [ 14.983989@2] HPLL: 0x4000029a
  2540. [ 14.983990@2] config HPLL done
  2541. [ 14.985017@2] set_hpll_od3_clk_div[825] div = 8
  2542. [ 14.985026@2] j = 6 vid_clk_div = 1
  2543. [ 14.987367@1] init: cannot find '/system/bin/factoryreset.sh' (No such file or directory), disabling 'factoryreset'
  2544. [ 14.999883@2] hdmitx20: rx scrambler status is not ok
  2545. [ 15.005805@5] init: couldn't write 4152 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2546. [ 15.091896@7] ------------[ cut here ]------------
  2547. [ 15.092254@6] type=1400 audit(1420070417.790:17): avc: denied { setattr } for pid=4139 comm="sud" name="server" dev="tmpfs" ino=10067 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=sock_file permissive=1
  2548. [ 15.092394@6] type=1400 audit(1420070417.820:18): avc: denied { getattr } for pid=4143 comm="pppoe_wrapper" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:pppoe_wrapper:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2549. [ 15.092517@6] type=1400 audit(1420070417.820:19): avc: denied { getattr } for pid=4145 comm="imageserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:imageserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2550. [ 15.093131@1] type=1400 audit(1420070417.840:20): avc: denied { getattr } for pid=4151 comm="audioserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:audioserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2551. [ 15.094622@0] type=1400 audit(1420070417.850:21): avc: denied { getattr } for pid=4152 comm="cameraserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:cameraserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2552. [ 15.094709@1] request_suspend_state: wakeup (3->0) at 15020907088 (2015-01-01 00:00:17.934521463 UTC)
  2553. [ 15.094711@1] request_suspend_state,164,old_sleep=0,new_state=0
  2554. [ 15.095153@0] type=1400 audit(1420070417.880:22): avc: denied { getattr } for pid=4156 comm="mediacodec" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:mediacodec:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2555. [ 15.095648@0] type=1400 audit(1420070417.890:23): avc: denied { getattr } for pid=4157 comm="mediadrmserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:mediadrmserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2556. [ 15.115873@0] hdmitx: system: irq 80000001
  2557. [ 15.115894@0] Start = 0x10000100 End = 0x100001ff
  2558. [ 15.115900@0] [0x10000104]: 0x00000001
  2559. [ 15.116000@0] [0x10000180]: 0x000000ff
  2560. [ 15.116002@0] [0x10000181]: 0x000000ff
  2561. [ 15.116004@0] [0x10000182]: 0x00000003
  2562. [ 15.116006@0] [0x10000183]: 0x00000007
  2563. [ 15.116008@0] [0x10000184]: 0x0000003f
  2564. [ 15.116010@0] [0x10000185]: 0x00000002
  2565. [ 15.116013@0] [0x10000187]: 0x000000ff
  2566. [ 15.116015@0] [0x10000188]: 0x00000003
  2567. [ 15.119874@2] Sink is HDMI device
  2568. [ 15.119912@2] 2160p60hz 60 1
  2569. [ 15.119915@2] 2160p60hz 60 1
  2570. [ 15.119918@2] hdmtix: set audio
  2571. [ 15.119925@2] hdmitx tx_aud_src = 0
  2572. [ 15.119946@2] hdmitx: fs = 3, cd = 5, tmds_clk = 594000
  2573. [ 15.119949@2] hdmitx aud_n_para = 6144
  2574. [ 15.120009@2] hdmitx: audio: Audio Type: PCM
  2575. [ 15.120014@2] fb: current vmode=2160p60hz, cmd: 0x10000
  2576. [ 15.328570@7] WARNING: CPU: 7 PID: 4135 at /mnt/data2/server/n-oranth_juebao/common/drivers/gpio/gpiolib.c:159 gpio_to_desc+0x5c/0x6c()
  2577. [ 15.340204@1] invalid GPIO 1430137304
  2578. [ 15.343650@1] Modules linked in: aml_fd628(O+) ddr_window mali_kbase(O)
  2579. [ 15.350198@1] CPU: 1 PID: 4135 Comm: insmod Tainted: G O 3.14.29-gef2caefb9bc #3
  2580. [ 15.358457@1] Call trace:
  2581. [ 15.361009@1] [<ffffffc001089390>] dump_backtrace+0x0/0x144
  2582. [ 15.366672@1] [<ffffffc0010894f0>] show_stack+0x1c/0x28
  2583. [ 15.371679@1] [<ffffffc001b22b4c>] dump_stack+0x74/0xb8
  2584. [ 15.376939@1] [<ffffffc00109ed10>] warn_slowpath_common+0x98/0xc0
  2585. [ 15.382908@1] [<ffffffc00109edac>] warn_slowpath_fmt+0x74/0x88
  2586. [ 15.388779@1] [<ffffffc001441e24>] gpio_to_desc+0x58/0x6c
  2587. [ 15.394083@1] [<ffffffc001442b24>] gpio_request+0x20/0x38
  2588. [ 15.399382@1] [<ffffffbffc077c0c>] fd628_driver_probe+0xb8/0x338 [aml_fd628]
  2589. [ 15.406442@1] [<ffffffc00148ec80>] platform_drv_probe+0x28/0x60
  2590. [ 15.412213@1] [<ffffffc00148cbec>] really_probe+0xd4/0x244
  2591. [ 15.417760@1] [<ffffffc00148ce80>] __driver_attach+0xb0/0xb8
  2592. [ 15.423269@1] [<ffffffc00148ac54>] bus_for_each_dev+0x68/0xac
  2593. [ 15.429046@1] [<ffffffc00148c69c>] driver_attach+0x28/0x34
  2594. [ 15.434442@1] [<ffffffc00148c2a4>] bus_add_driver+0x158/0x210
  2595. [ 15.440086@1] [<ffffffc00148d63c>] driver_register+0x64/0x124
  2596. [ 15.445856@1] [<ffffffc00148ec48>] __platform_driver_register+0x74/0x84
  2597. [ 15.452339@1] [<ffffffbffc07b01c>] $x+0x1c/0x28 [aml_fd628]
  2598. [ 15.457928@1] [<ffffffc0010816a4>] do_one_initcall+0xd4/0x138
  2599. [ 15.463551@1] [<ffffffc00111bb04>] load_module+0x1420/0x1dbc
  2600. [ 15.469212@1] [<ffffffc00111c618>] SyS_finit_module+0x80/0x90
  2601. [ 15.474921@7] ---[ end trace c6daeb698615c41b ]---
  2602. [ 15.479630@1] gpiod_request: invalid GPIO
  2603. [ 15.483535@1] FD628: can't request gpio of fd628_clk
  2604. [ 15.488377@1] fd628_dev: probe of fd628_dev.35 failed with error -22
  2605. [ 15.500246@4] healthd: No battery devices found
  2606. [ 15.500276@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  2607. Hel[ 15.509881@2] hdmitx20: rx scrambler status
  2608. lo Jten!!!
  2609. Hello Jten!!!
  2610. Hello Jten!!!
  2611. atvX_S905X:/ $ [ 19.553614@4] init: couldn't write 4182 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2612. [ 19.770648@6] request_suspend_state: wakeup (0->0) at 19696839799 (2015-01-01 00:00:22.610454882 UTC)
  2613. [ 19.774208@6] request_suspend_state,164,old_sleep=0,new_state=0
  2614. [ 20.485348@6] fb: osd[0] enable: 0 (systemcontrol)
  2615. [ 20.500868@6] fb: osd[1] enable: 0 (systemcontrol)
  2616. [ 20.517662@6] fb: osd_set_free_scale_enable_hw
  2617. [ 20.517778@0] type=1400 audit(1420070423.350:24): avc: denied { read write } for pid=4166 comm="systemcontrol" name="free_scale" dev="sysfs" ino=14318 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs_fb1_free_scale:s0 tclass=file permissive=1
  2618. [ 20.518190@0] type=1400 audit(1420070423.350:25): avc: denied { open } for pid=4166 comm="systemcontrol" path="/sys/devices/meson-fb.15/graphics/fb1/free_scale" dev="sysfs" ino=14318 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs_fb1_free_scale:s0 tclass=file permissive=1
  2619. [ 20.584050@2] fb: osd_set_free_scale_enable_hw
  2620. [ 20.600849@0] vout_serve: osd0=> x:0,y:0,w:1920,h:1080
  2621. [ 20.600849@0] osd1=> x:0,y:0,w:18,h:18
  2622. [ 20.604129@0] fb: current vmode=2160p60hz, cmd: 0x30000
  2623. [ 20.609371@0] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
  2624. [ 20.615548@0] fb: osd[1].scaledata: 1920 3840 1080 2160
  2625. [ 20.620751@0] fb: osd[1].pandata: 0 0 0 0
  2626. [ 23.424267@6] accelerate: /data/system/users/0/settings_global.xml not exist!
  2627. [ 23.425790@6] accelerate: device do not provisioned:do not trace - wait next time
  2628. [ 24.491831@4] type=1400 audit(1420070427.320:26): avc: denied { getattr } for pid=4205 comm="audioserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:audioserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2629. [ 24.498239@5] init: couldn't write 4206 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2630. [ 24.516788@5] type=1400 audit(1420070427.330:27): avc: denied { getattr } for pid=4206 comm="cameraserver" path="/vendor" dev="rootfs" ino=2097 scontext=u:r:cameraserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  2631. [ 24.770699@7] request_suspend_state: wakeup (0->0) at 24696891260 (2015-01-01 00:00:27.610506092 UTC)
  2632. [ 24.774272@7] request_suspend_state,164,old_sleep=0,new_state=0
  2633. [ 29.806124@4] init: couldn't write 4242 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2634. [ 30.114176@6] request_suspend_state: wakeup (0->0) at 30040366554 (2015-01-01 00:00:32.953980928 UTC)
  2635. [ 30.117745@6] request_suspend_state,164,old_sleep=0,new_state=0
  2636. [ 34.154060@3] init: couldn't write 4286 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2637. [ 34.443712@7] request_suspend_state: wakeup (0->0) at 34369904139 (2015-01-01 00:00:37.283518139 UTC)
  2638. [ 34.447276@7] request_suspend_state,164,old_sleep=0,new_state=0
  2639. [ 39.479517@4] init: couldn't write 4332 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2640. [ 39.770917@4] request_suspend_state: wakeup (0->0) at 39697110559 (2015-01-01 00:00:42.610724975 UTC)
  2641. [ 39.774495@4] request_suspend_state,164,old_sleep=0,new_state=0
  2642. [ 44.806237@6] init: couldn't write 4376 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2643. [ 45.095349@6] request_suspend_state: wakeup (0->0) at 45021541978 (2015-01-01 00:00:47.935156019 UTC)
  2644. [ 45.098930@6] request_suspend_state,164,old_sleep=0,new_state=0
  2645. [ 49.129443@7] init: couldn't write 4420 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2646. [ 49.421267@4] request_suspend_state: wakeup (0->0) at 49347458855 (2015-01-01 00:00:52.261073146 UTC)
  2647. [ 49.424831@4] request_suspend_state,164,old_sleep=0,new_state=0
  2648. [ 54.458608@5] init: couldn't write 4465 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2649. [ 54.754814@4] request_suspend_state: wakeup (0->0) at 54681006732 (2015-01-01 00:00:57.594620732 UTC)
  2650. [ 54.758382@4] request_suspend_state,164,old_sleep=0,new_state=0
  2651. [ 59.789614@5] init: couldn't write 4507 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2652. [ 60.082142@7] request_suspend_state: wakeup (0->0) at 60008332860 (2015-01-01 00:01:02.921947193 UTC)
  2653. [ 60.085712@7] request_suspend_state,164,old_sleep=0,new_state=0
  2654. [ 64.124138@1] init: couldn't write 4550 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2655. [ 64.417499@4] request_suspend_state: wakeup (0->0) at 64343691904 (2015-01-01 00:01:07.257306195 UTC)
  2656. [ 64.421066@4] request_suspend_state,164,old_sleep=0,new_state=0
  2657. [ 69.453421@5] init: couldn't write 4594 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2658. [ 69.750822@4] request_suspend_state: wakeup (0->0) at 69677013906 (2015-01-01 00:01:12.590627781 UTC)
  2659. [ 69.754385@4] request_suspend_state,164,old_sleep=0,new_state=0
  2660. [ 74.786900@6] init: couldn't write 4639 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2661. [ 75.089735@4] request_suspend_state: wakeup (0->0) at 75015923200 (2015-01-01 00:01:17.929537200 UTC)
  2662. [ 75.093304@4] request_suspend_state,164,old_sleep=0,new_state=0
  2663. [ 79.134198@1] init: couldn't write 4683 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2664. [ 79.430444@6] request_suspend_state: wakeup (0->0) at 79356635702 (2015-01-01 00:01:22.270250077 UTC)
  2665. [ 79.434005@6] request_suspend_state,164,old_sleep=0,new_state=0
  2666. [ 84.466449@7] init: couldn't write 4728 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2667. [ 84.765357@6] request_suspend_state: wakeup (0->0) at 84691548705 (2015-01-01 00:01:27.605162954 UTC)
  2668. [ 84.768925@6] request_suspend_state,164,old_sleep=0,new_state=0
  2669. [ 89.804708@7] init: couldn't write 4772 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2670. [ 90.102891@6] request_suspend_state: wakeup (0->0) at 90029082583 (2015-01-01 00:01:32.942697540 UTC)
  2671. [ 90.106461@6] request_suspend_state,164,old_sleep=0,new_state=0
  2672. [ 94.137964@4] init: couldn't write 4816 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2673. [ 94.445359@7] request_suspend_state: wakeup (0->0) at 94371550376 (2015-01-01 00:01:37.285164542 UTC)
  2674. [ 94.448923@7] request_suspend_state,164,old_sleep=0,new_state=0
  2675. [ 99.480522@4] init: couldn't write 4861 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2676. [ 99.774799@7] request_suspend_state: wakeup (0->0) at 99700990921 (2015-01-01 00:01:42.614605753 UTC)
  2677. [ 99.778364@7] request_suspend_state,164,old_sleep=0,new_state=0
  2678. [ 104.810216@4] init: couldn't write 4906 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2679. [ 105.097823@5] request_suspend_state: wakeup (0->0) at 105024014756 (2015-01-01 00:01:47.937628672 UTC)
  2680. [ 105.101475@5] request_suspend_state,164,old_sleep=0,new_state=0
  2681. [ 109.133772@6] init: couldn't write 4950 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2682. [ 109.433059@5] request_suspend_state: wakeup (0->0) at 109359251342 (2015-01-01 00:01:52.272865674 UTC)
  2683. [ 109.436707@5] request_suspend_state,164,old_sleep=0,new_state=0
  2684. [ 114.474885@6] init: couldn't write 4995 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2685. [ 114.775809@5] request_suspend_state: wakeup (0->0) at 114701999928 (2015-01-01 00:01:57.615614844 UTC)
  2686. [ 114.779463@5] request_suspend_state,164,old_sleep=0,new_state=0
  2687. [ 119.811274@6] init: couldn't write 5039 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2688. [ 120.068964@6] request_suspend_state: wakeup (0->0) at 119995156389 (2015-01-01 00:02:02.908771346 UTC)
  2689. [ 120.072618@6] request_suspend_state,164,old_sleep=0,new_state=0
  2690. [ 124.104074@3] init: couldn't write 5081 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2691. [ 124.404812@7] request_suspend_state: wakeup (0->0) at 124331004849 (2015-01-01 00:02:07.244619598 UTC)
  2692. [ 124.408466@7] request_suspend_state,164,old_sleep=0,new_state=0
  2693. [ 129.445061@4] init: couldn't write 5126 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2694. [ 129.732433@6] request_suspend_state: wakeup (0->0) at 129658625351 (2015-01-01 00:02:12.572240226 UTC)
  2695. [ 129.736086@6] request_suspend_state,164,old_sleep=0,new_state=0
  2696. [ 134.768789@5] init: couldn't write 5171 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2697. [ 135.068913@7] request_suspend_state: wakeup (0->0) at 134995107979 (2015-01-01 00:02:17.908722145 UTC)
  2698. [ 135.072561@7] request_suspend_state,164,old_sleep=0,new_state=0
  2699. [ 139.104326@4] init: couldn't write 5215 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2700. [ 139.404520@7] request_suspend_state: wakeup (0->0) at 139330713481 (2015-01-01 00:02:22.244327355 UTC)
  2701. [ 139.408177@7] request_suspend_state,164,old_sleep=0,new_state=0
  2702. [ 144.445149@4] init: couldn't write 5258 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2703. [ 144.743782@4] request_suspend_state: wakeup (0->0) at 144669973025 (2015-01-01 00:02:27.583587150 UTC)
  2704. [ 144.747431@4] request_suspend_state,164,old_sleep=0,new_state=0
  2705. [ 149.784714@5] init: couldn't write 5301 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2706. [ 150.081396@5] request_suspend_state: wakeup (0->0) at 150007587695 (2015-01-01 00:02:32.921202527 UTC)
  2707. [ 150.085048@5] request_suspend_state,164,old_sleep=0,new_state=0
  2708. [ 154.124265@4] init: couldn't write 5345 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2709. [ 154.418743@6] request_suspend_state: wakeup (0->0) at 154344935238 (2015-01-01 00:02:37.258549613 UTC)
  2710. [ 154.422395@6] request_suspend_state,164,old_sleep=0,new_state=0
  2711. [ 159.454793@7] init: couldn't write 5390 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2712. [ 159.746525@6] request_suspend_state: wakeup (0->0) at 159672718574 (2015-01-01 00:02:42.586332323 UTC)
  2713. [ 159.750178@6] request_suspend_state,164,old_sleep=0,new_state=0
  2714. [ 164.782187@7] init: couldn't write 5433 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2715. [ 165.129362@6] request_suspend_state: wakeup (0->0) at 165055555035 (2015-01-01 00:02:47.969169743 UTC)
  2716. [ 165.133019@6] request_suspend_state,164,old_sleep=0,new_state=0
  2717. [ 169.164078@1] init: couldn't write 5482 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2718. [ 169.452057@5] request_suspend_state: wakeup (0->0) at 169378249454 (2015-01-01 00:02:52.291863786 UTC)
  2719. [ 169.455710@5] request_suspend_state,164,old_sleep=0,new_state=0
  2720. [ 174.494996@7] init: couldn't write 5526 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2721. [ 174.809653@5] request_suspend_state: wakeup (0->0) at 174735846081 (2015-01-01 00:02:57.649460372 UTC)
  2722. [ 174.813300@5] request_suspend_state,164,old_sleep=0,new_state=0
  2723. [ 179.845231@6] init: couldn't write 5571 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2724. [ 180.144088@5] request_suspend_state: wakeup (0->0) at 180070280667 (2015-01-01 00:03:02.983895542 UTC)
  2725. [ 180.147742@5] request_suspend_state,164,old_sleep=0,new_state=0
  2726. [ 184.177711@6] init: couldn't write 5615 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2727. [ 184.474095@7] request_suspend_state: wakeup (0->0) at 184400285586 (2015-01-01 00:03:07.313900585 UTC)
  2728. [ 184.477751@7] request_suspend_state,164,old_sleep=0,new_state=0
  2729. [ 189.514718@5] init: couldn't write 5659 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2730. [ 189.814106@7] request_suspend_state: wakeup (0->0) at 189740298422 (2015-01-01 00:03:12.653912629 UTC)
  2731. [ 189.817756@7] request_suspend_state,164,old_sleep=0,new_state=0
  2732. [ 194.852513@4] init: couldn't write 5702 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2733. [ 195.146242@7] request_suspend_state: wakeup (0->0) at 195072435341 (2015-01-01 00:03:17.986049340 UTC)
  2734. [ 195.149895@7] request_suspend_state,164,old_sleep=0,new_state=0
  2735. [ 199.180745@4] init: couldn't write 5747 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2736. [ 199.478917@5] request_suspend_state: wakeup (0->0) at 199405109051 (2015-01-01 00:03:22.318723051 UTC)
  2737. [ 199.482571@5] request_suspend_state,164,old_sleep=0,new_state=0
  2738. [ 204.516566@6] init: couldn't write 5792 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2739. [ 204.821586@7] request_suspend_state: wakeup (0->0) at 204747777012 (2015-01-01 00:03:27.661391803 UTC)
  2740. [ 204.825238@7] request_suspend_state,164,old_sleep=0,new_state=0
  2741. [ 209.857302@4] init: couldn't write 5837 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2742. [ 210.159351@7] request_suspend_state: wakeup (0->0) at 210085542515 (2015-01-01 00:03:32.999156972 UTC)
  2743. [ 210.163002@7] request_suspend_state,164,old_sleep=0,new_state=0
  2744. [ 214.193653@4] init: couldn't write 5881 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2745. [ 214.484490@6] request_suspend_state: wakeup (0->0) at 214410684559 (2015-01-01 00:03:37.324298891 UTC)
  2746. [ 214.488146@6] request_suspend_state,164,old_sleep=0,new_state=0
  2747. [ 219.524709@7] init: couldn't write 5925 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2748. [ 219.826132@6] request_suspend_state: wakeup (0->0) at 219752325394 (2015-01-01 00:03:42.665939727 UTC)
  2749. [ 219.829781@6] request_suspend_state,164,old_sleep=0,new_state=0
  2750. [ 224.861237@7] init: couldn't write 5969 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2751. [ 225.157298@5] request_suspend_state: wakeup (0->0) at 225083493105 (2015-01-01 00:03:47.997107521 UTC)
  2752. [ 225.160957@5] request_suspend_state,164,old_sleep=0,new_state=0
  2753. [ 229.193770@6] init: couldn't write 6014 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2754. [ 229.483976@5] request_suspend_state: wakeup (0->0) at 229410166649 (2015-01-01 00:03:52.323780773 UTC)
  2755. [ 229.487624@5] request_suspend_state,164,old_sleep=0,new_state=0
  2756. [ 234.521058@6] init: couldn't write 6058 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2757. [ 234.812424@4] request_suspend_state: wakeup (0->0) at 234738615902 (2015-01-01 00:03:57.652230901 UTC)
  2758. [ 234.816080@4] request_suspend_state,164,old_sleep=0,new_state=0
  2759. [ 239.854816@5] init: couldn't write 6102 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2760. [ 240.151844@7] request_suspend_state: wakeup (0->0) at 240078036362 (2015-01-01 00:04:02.991650528 UTC)
  2761. [ 240.155498@7] request_suspend_state,164,old_sleep=0,new_state=0
  2762. [ 244.186271@4] init: couldn't write 6147 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2763. [ 244.481324@7] request_suspend_state: wakeup (0->0) at 244407517615 (2015-01-01 00:04:07.321132239 UTC)
  2764. [ 244.484972@7] request_suspend_state,164,old_sleep=0,new_state=0
  2765. [ 249.517047@4] init: couldn't write 6191 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2766. [ 249.815028@4] request_suspend_state: wakeup (0->0) at 249741219450 (2015-01-01 00:04:12.654833741 UTC)
  2767. [ 249.818687@4] request_suspend_state,164,old_sleep=0,new_state=0
  2768. [ 254.856688@7] init: couldn't write 6235 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2769. [ 255.157532@4] request_suspend_state: wakeup (0->0) at 255083720453 (2015-01-01 00:04:17.997335077 UTC)
  2770. [ 255.161189@4] request_suspend_state,164,old_sleep=0,new_state=0
  2771. [ 259.190397@5] init: couldn't write 6280 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2772. [ 259.486544@5] request_suspend_state: wakeup (0->0) at 259412739747 (2015-01-01 00:04:22.326353663 UTC)
  2773. [ 259.490199@5] request_suspend_state,164,old_sleep=0,new_state=0
  2774. [ 264.524633@6] init: couldn't write 6325 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2775. [ 264.823601@6] request_suspend_state: wakeup (0->0) at 264749784499 (2015-01-01 00:04:27.663397290 UTC)
  2776. [ 264.827252@6] request_suspend_state,164,old_sleep=0,new_state=0
  2777. [ 269.864974@4] init: couldn't write 6370 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2778. [ 270.177974@5] request_suspend_state: wakeup (0->0) at 270104167752 (2015-01-01 00:04:33.017782376 UTC)
  2779. [ 270.181624@5] request_suspend_state,164,old_sleep=0,new_state=0
  2780. [ 274.214154@1] init: couldn't write 6415 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2781. [ 274.509129@5] request_suspend_state: wakeup (0->0) at 274435321379 (2015-01-01 00:04:37.348936128 UTC)
  2782. [ 274.512779@5] request_suspend_state,164,old_sleep=0,new_state=0
  2783. [ 279.546683@6] init: couldn't write 6458 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2784. [ 279.849888@5] request_suspend_state: wakeup (0->0) at 279776078006 (2015-01-01 00:04:42.689692131 UTC)
  2785. [ 279.853548@5] request_suspend_state,164,old_sleep=0,new_state=0
  2786. [ 284.894868@6] init: couldn't write 6503 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2787. [ 285.202565@7] request_suspend_state: wakeup (0->0) at 285128757967 (2015-01-01 00:04:48.042372967 UTC)
  2788. [ 285.206225@7] request_suspend_state,164,old_sleep=0,new_state=0
  2789. [ 289.244120@0] init: couldn't write 6548 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2790. [ 289.534505@5] request_suspend_state: wakeup (0->0) at 289460697678 (2015-01-01 00:04:52.374312594 UTC)
  2791. [ 289.538162@5] request_suspend_state,164,old_sleep=0,new_state=0
  2792. [ 294.570167@6] init: couldn't write 6592 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2793. [ 294.867045@6] request_suspend_state: wakeup (0->0) at 294793238305 (2015-01-01 00:04:57.706853263 UTC)
  2794. [ 294.870697@6] request_suspend_state,164,old_sleep=0,new_state=0
  2795. [ 299.904748@7] init: couldn't write 6637 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2796. [ 300.206594@7] request_suspend_state: wakeup (0->0) at 300132786808 (2015-01-01 00:05:03.046400890 UTC)
  2797. [ 300.210246@7] request_suspend_state,164,old_sleep=0,new_state=0
  2798. [ 304.241298@4] init: couldn't write 6683 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2799. [ 304.533304@6] request_suspend_state: wakeup (0->0) at 304459495768 (2015-01-01 00:05:07.373110517 UTC)
  2800. [ 304.536958@6] request_suspend_state,164,old_sleep=0,new_state=0
  2801. [ 309.568738@7] init: couldn't write 6728 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2802. [ 309.880823@5] request_suspend_state: wakeup (0->0) at 309807016604 (2015-01-01 00:05:12.720631270 UTC)
  2803. [ 309.884474@5] request_suspend_state,164,old_sleep=0,new_state=0
  2804. [ 314.916006@6] init: couldn't write 6774 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2805. [ 315.215978@5] request_suspend_state: wakeup (0->0) at 315142171190 (2015-01-01 00:05:18.055785564 UTC)
  2806. [ 315.219633@5] request_suspend_state,164,old_sleep=0,new_state=0
  2807. [ 319.252114@6] init: couldn't write 6819 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2808. [ 319.545985@4] request_suspend_state: wakeup (0->0) at 319472176859 (2015-01-01 00:05:22.385790816 UTC)
  2809. [ 319.549643@4] request_suspend_state,164,old_sleep=0,new_state=0
  2810. [ 324.584979@5] init: couldn't write 6864 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2811. [ 324.886135@5] request_suspend_state: wakeup (0->0) at 324812325986 (2015-01-01 00:05:27.725940944 UTC)
  2812. [ 324.889787@5] request_suspend_state,164,old_sleep=0,new_state=0
  2813. [ 329.921733@6] init: couldn't write 6907 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2814. [ 330.218949@5] request_suspend_state: wakeup (0->0) at 330145136072 (2015-01-01 00:05:33.058750988 UTC)
  2815. [ 330.222604@5] request_suspend_state,164,old_sleep=0,new_state=0
  2816. [ 334.254215@4] init: couldn't write 6952 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2817. [ 334.553768@6] request_suspend_state: wakeup (0->0) at 334479960574 (2015-01-01 00:05:37.393575032 UTC)
  2818. [ 334.557417@6] request_suspend_state,164,old_sleep=0,new_state=0
  2819. [ 339.594836@7] init: couldn't write 6996 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2820. [ 339.897297@7] request_suspend_state: wakeup (0->0) at 339823490327 (2015-01-01 00:05:42.737104618 UTC)
  2821. [ 339.900950@7] request_suspend_state,164,old_sleep=0,new_state=0
  2822. [ 344.932820@4] init: couldn't write 7040 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2823. [ 345.225006@5] request_suspend_state: wakeup (0->0) at 345151194329 (2015-01-01 00:05:48.064807537 UTC)
  2824. [ 345.228663@5] request_suspend_state,164,old_sleep=0,new_state=0
  2825. [ 349.259561@6] init: couldn't write 7084 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2826. [ 349.558874@5] request_suspend_state: wakeup (0->0) at 349485067373 (2015-01-01 00:05:52.398681956 UTC)
  2827. [ 349.562528@5] request_suspend_state,164,old_sleep=0,new_state=0
  2828. [ 354.594332@0] init: couldn't write 7128 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2829. [ 354.911171@5] request_suspend_state: wakeup (0->0) at 354837362584 (2015-01-01 00:05:57.750976833 UTC)
  2830. [ 354.914824@5] request_suspend_state,164,old_sleep=0,new_state=0
  2831. [ 359.947486@6] init: couldn't write 7174 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2832. [ 360.248574@6] request_suspend_state: wakeup (0->0) at 360174769170 (2015-01-01 00:06:03.088383836 UTC)
  2833. [ 360.252223@6] request_suspend_state,164,old_sleep=0,new_state=0
  2834. [ 364.283326@7] init: couldn't write 7220 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2835. [ 364.574856@5] request_suspend_state: wakeup (0->0) at 364501050005 (2015-01-01 00:06:07.414664463 UTC)
  2836. [ 364.578508@5] request_suspend_state,164,old_sleep=0,new_state=0
  2837. [ 369.610319@6] init: couldn't write 7263 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2838. [ 369.910783@4] request_suspend_state: wakeup (0->0) at 369836975966 (2015-01-01 00:06:12.750590799 UTC)
  2839. [ 369.914432@4] request_suspend_state,164,old_sleep=0,new_state=0
  2840. [ 374.955140@5] init: couldn't write 7308 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2841. [ 375.252316@6] request_suspend_state: wakeup (0->0) at 375178510177 (2015-01-01 00:06:18.092125010 UTC)
  2842. [ 375.255974@6] request_suspend_state,164,old_sleep=0,new_state=0
  2843. [ 379.294295@0] init: couldn't write 7353 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2844. [ 379.591412@6] request_suspend_state: wakeup (0->0) at 379517604304 (2015-01-01 00:06:22.431218095 UTC)
  2845. [ 379.595063@6] request_suspend_state,164,old_sleep=0,new_state=0
  2846. [ 384.634891@7] init: couldn't write 7398 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2847. [ 384.931432@7] request_suspend_state: wakeup (0->0) at 384857625223 (2015-01-01 00:06:27.771239639 UTC)
  2848. [ 384.935085@7] request_suspend_state,164,old_sleep=0,new_state=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!