Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-26-generic] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Blue Serial ATA
- Device Model: WDC WD5000AAKS-00A7B0
- Serial Number: WD-WMASY0192740
- LU WWN Device Id: 5 0014ee 0ab2bdce7
- Firmware Version: 01.03B01
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Tue Jul 3 10:52:36 2012 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (11160) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 131) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 157 157 051 Pre-fail Always - 249797
- 3 Spin_Up_Time 0x0003 158 155 021 Pre-fail Always - 5100
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 0
- 5 Reallocated_Sector_Ct 0x0033 182 182 140 Pre-fail Always - 137
- 7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
- 9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 34817
- 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 98
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 85
- 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 98
- 194 Temperature_Celsius 0x0022 110 096 000 Old_age Always - 37
- 196 Reallocated_Event_Count 0x0032 063 063 000 Old_age Always - 137
- 197 Current_Pending_Sector 0x0012 187 185 000 Old_age Always - 1128
- 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 35
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 6
- 200 Multi_Zone_Error_Rate 0x0008 174 174 051 Old_age Offline - 2700
- SMART Error Log Version: 1
- ATA Error Count: 15075 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 15075 occurred at disk power-on lifetime: 34796 hours (1449 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 80 f6 5a ad e0 Error: UNC 128 sectors at LBA = 0x00ad5af6 = 11361014
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 80 f6 5a ad 28 08 18d+19:10:46.585 READ DMA EXT
- 25 00 10 e6 69 ac 28 08 18d+19:10:46.462 READ DMA EXT
- 25 00 40 a6 69 ac 28 08 18d+19:10:46.419 READ DMA EXT
- 25 00 40 36 56 ac 28 08 18d+19:10:46.202 READ DMA EXT
- 25 00 40 f6 55 ac 28 08 18d+19:10:46.171 READ DMA EXT
- Error 15074 occurred at disk power-on lifetime: 34784 hours (1449 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 70 2f 3a e0 Error: UNC at LBA = 0x003a2f70 = 3813232
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 70 2f 3a 03 08 18d+07:25:03.617 READ DMA EXT
- 27 00 00 00 00 00 00 08 18d+07:25:03.601 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 08 18d+07:25:03.593 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 08 18d+07:25:03.593 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 08 18d+07:25:03.593 READ NATIVE MAX ADDRESS EXT
- Error 15073 occurred at disk power-on lifetime: 34784 hours (1449 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 70 2f 3a e0 Error: UNC at LBA = 0x003a2f70 = 3813232
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 70 2f 3a 03 08 18d+07:24:49.346 READ DMA EXT
- 27 00 00 00 00 00 00 08 18d+07:24:49.339 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 08 18d+07:24:49.331 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 08 18d+07:24:49.331 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 08 18d+07:24:49.331 READ NATIVE MAX ADDRESS EXT
- Error 15072 occurred at disk power-on lifetime: 34784 hours (1449 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 70 2f 3a e0 Error: UNC at LBA = 0x003a2f70 = 3813232
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 70 2f 3a 03 08 18d+07:24:42.618 READ DMA EXT
- 27 00 00 00 00 00 00 08 18d+07:24:42.602 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 08 18d+07:24:42.594 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 08 18d+07:24:42.594 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 08 18d+07:24:42.594 READ NATIVE MAX ADDRESS EXT
- Error 15071 occurred at disk power-on lifetime: 34784 hours (1449 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 70 2f 3a e0 Error: UNC at LBA = 0x003a2f70 = 3813232
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 70 2f 3a 03 08 18d+07:24:30.626 READ DMA EXT
- 27 00 00 00 00 00 00 08 18d+07:24:30.618 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 08 18d+07:24:30.609 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 08 18d+07:24:30.602 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 08 18d+07:24:30.602 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement