Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2022.04 MNT Reform 2025-01-12-63934-gb0e908b1ec-dirty (Jan 12 2025 - 22:30:46 +0000)
- config to do 4000 1d training.
- config to do 400 1d training.
- config to do 100 1d training.
- config to do 4000 2d training.
- Normal Boot
- Trying to boot from BOOTROM
- image offset 0x0, pagesize 0x200, ivt offset 0x0
- NOTICE: Do not release JR0 to NS as it can be used by HAB
- NOTICE: BL31: v2.8(release):lf-6.1.22-2.0.0-6-g7e3484cc1
- NOTICE: BL31: Built : 15:05:50, Oct 17 2023
- U-Boot 2022.04 MNT Reform 2025-01-12-63934-gb0e908b1ec-dirty (Jan 12 2025 - 22:30:46 +0000)
- CPU: i.MX8MP[8] rev1.1 1800 MHz (running at 1200 MHz)
- CPU: Commercial temperature grade (0C to 95C) at 41C
- Reset cause: POR
- Model: MNT Pocket Reform with i.MX8MP Module
- Board: nitrogen8mp
- Watchdog enabled
- DRAM: 8 GiB
- No USB device found
- Core: 142 devices, 26 uclasses, devicetree: separate
- MMC: FSL_SDHC: 0, FSL_SDHC: 2
- Loading Environment from MMC...
- *** Warning - bad CRC, using default environment
- Display: hdmi:1920x1080M@60 (1920x1080)
- [*]-Video Link 2 (1920 x 1080)
- [0] lcd-controller@32fc6000, video
- [1] hdmi@32fd8000, display
- In: serial
- Out: serial
- Err: serial
- BuildInfo:
- - ATF 7e3484c
- [?2004lNet: Could not get PHY for FEC1: mask 0x90
- Could not get PHY for FEC1: mask 0x90
- Micrel ksz9031
- eth0: ethernet@30bf0000 [PRIME]
- Hit any key to stop autoboot: 2
- switch to partitions #0, OK
- mmc0 is current device
- switch to partitions #0, OK
- mmc2(part 0) is current device
- Scanning mmc 2:1...
- Found U-Boot script /boot.scr
- 5639 bytes read in 2 ms (2.7 MiB/s)
- ## Executing script at 40480000
- 35742208 bytes read in 197 ms (173 MiB/s)
- 54761 bytes read in 3 ms (17.4 MiB/s)
- 38603229 bytes read in 212 ms (173.7 MiB/s)
- Booting Debian 6.15.4-mnt-reform-arm64 from mmc 2:1...
- Moving Image from 0x40480000 to 0x40600000, end=42910000
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Using Device Tree in place at 0000000043000000, end 00000000430105e8
- Starting kernel ...
- ]104
- [?7h
- [32766;32766H
- ]104
- [?7h
- [32766;32766H
- Debian GNU/Linux 13 narsil ttymxc1
- narsil login:
Advertisement
Add Comment
Please, Sign In to add comment