API tools faq
paste
Advertisement
embed3d

colibri-imx8x-kernel-v5.19

embed3d
Aug 10th, 2022 (edited)
277
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.44 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042]
  2. [ 0.000000] Linux version 5.19.0-00004-ge81ae5ae7340-dirty (philipp@thinkpad-philipp) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #3 SMP PREEMPT Wed Aug 10 00:32:20 CEST 2022
  3. [ 0.000000] Machine model: Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3
  4. [ 0.000000] efi: UEFI not found.
  5. [ 0.000000] NUMA: No NUMA configuration found
  6. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080200000-0x00000000ffffffff]
  7. [ 0.000000] NUMA: NODE_DATA [mem 0xffbf9b40-0xffbfbfff]
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA [mem 0x0000000080200000-0x00000000ffffffff]
  10. [ 0.000000] DMA32 empty
  11. [ 0.000000] Normal empty
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
  15. [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000861fffff]
  16. [ 0.000000] node 0: [mem 0x0000000086200000-0x0000000091ffffff]
  17. [ 0.000000] node 0: [mem 0x0000000092000000-0x00000000920fffff]
  18. [ 0.000000] node 0: [mem 0x0000000092100000-0x00000000923fffff]
  19. [ 0.000000] node 0: [mem 0x0000000092400000-0x0000000094afffff]
  20. [ 0.000000] node 0: [mem 0x0000000094b00000-0x00000000ffffffff]
  21. [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff]
  22. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  23. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fb600000
  24. [ 0.000000] psci: probing for conduit method from DT.
  25. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  26. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  28. [ 0.000000] psci: SMC Calling Convention v1.1
  29. [ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920
  30. [ 0.000000] pcpu-alloc: s43176 r8192 d30552 u81920 alloc=20*4096
  31. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. [ 0.000000] Detected VIPT I-cache on CPU0
  33. [ 0.000000] CPU features: detected: GIC system register CPU interface
  34. [ 0.000000] Fallback order for Node 0: 0
  35. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  36. [ 0.000000] Policy zone: DMA
  37. [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait loglevel=8
  38. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  39. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  40. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  41. [ 0.000000] Memory: 1924744K/2095104K available (12608K kernel code, 1252K rwdata, 4644K rodata, 2240K init, 530K bss, 137592K reserved, 32768K cma-reserved)
  42. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  43. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  44. [ 0.000000] rcu: RCU event tracing is enabled.
  45. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  46. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  47. [ 0.000000] Tracing variant of Tasks RCU enabled.
  48. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  49. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  50. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  51. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  52. [ 0.000000] GICv3: 512 SPIs implemented
  53. [ 0.000000] GICv3: 0 Extended SPIs implemented
  54. [ 0.000000] Root IRQ handler: gic_handle_irq
  55. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  56. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000051b00000
  57. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  58. [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
  59. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
  60. [ 0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
  61. [ 0.000297] Console: colour dummy device 80x25
  62. [ 0.000917] printk: console [tty0] enabled
  63. [ 0.001010] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
  64. [ 0.001041] pid_max: default: 32768 minimum: 301
  65. [ 0.001132] LSM: Security Framework initializing
  66. [ 0.001269] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  67. [ 0.001300] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  68. [ 0.002950] cblist_init_generic: Setting adjustable number of callback queues.
  69. [ 0.002990] cblist_init_generic: Setting shift to 2 and lim to 1.
  70. [ 0.003091] cblist_init_generic: Setting shift to 2 and lim to 1.
  71. [ 0.003285] rcu: Hierarchical SRCU implementation.
  72. [ 0.003301] rcu: Max phase no-delay instances is 1000.
  73. [ 0.004230] EFI services will not be available.
  74. [ 0.004530] smp: Bringing up secondary CPUs ...
  75. [ 0.005327] Detected VIPT I-cache on CPU1
  76. [ 0.005366] GICv3: CPU1: found redistributor 1 region 0:0x0000000051b20000
  77. [ 0.005417] CPU1: Booted secondary processor 0x0000000001 [0x410fd042]
  78. [ 0.006250] Detected VIPT I-cache on CPU2
  79. [ 0.006280] GICv3: CPU2: found redistributor 2 region 0:0x0000000051b40000
  80. [ 0.006307] CPU2: Booted secondary processor 0x0000000002 [0x410fd042]
  81. [ 0.007078] Detected VIPT I-cache on CPU3
  82. [ 0.007107] GICv3: CPU3: found redistributor 3 region 0:0x0000000051b60000
  83. [ 0.007132] CPU3: Booted secondary processor 0x0000000003 [0x410fd042]
  84. [ 0.007198] smp: Brought up 1 node, 4 CPUs
  85. [ 0.007313] SMP: Total of 4 processors activated.
  86. [ 0.007327] CPU features: detected: 32-bit EL0 Support
  87. [ 0.007340] CPU features: detected: 32-bit EL1 Support
  88. [ 0.007355] CPU features: detected: CRC32 instructions
  89. [ 0.007842] CPU: All CPU(s) started at EL2
  90. [ 0.007903] alternatives: patching kernel code
  91. [ 0.009562] devtmpfs: initialized
  92. [ 0.014870] KASLR disabled due to lack of seed
  93. [ 0.015088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  94. [ 0.015127] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  95. [ 0.016465] pinctrl core: initialized pinctrl subsystem
  96. [ 0.017237] DMI not present or invalid.
  97. [ 0.018103] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  98. [ 0.019511] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  99. [ 0.019711] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  100. [ 0.019881] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  101. [ 0.019979] audit: initializing netlink subsys (disabled)
  102. [ 0.020161] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1
  103. [ 0.020729] thermal_sys: Registered thermal governor 'step_wise'
  104. [ 0.020736] thermal_sys: Registered thermal governor 'power_allocator'
  105. [ 0.021016] cpuidle: using governor menu
  106. [ 0.021203] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  107. [ 0.021320] ASID allocator initialised with 65536 entries
  108. [ 0.021342] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
  109. [ 0.021361] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
  110. [ 0.021378] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
  111. [ 0.021395] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
  112. [ 0.022229] Serial: AMBA PL011 UART driver
  113. [ 0.045346] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  114. [ 0.045389] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  115. [ 0.045409] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  116. [ 0.045429] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  117. [ 0.047139] ACPI: Interpreter disabled.
  118. [ 0.048135] iommu: Default domain type: Translated
  119. [ 0.048164] iommu: DMA domain TLB invalidation policy: strict mode
  120. [ 0.048513] SCSI subsystem initialized
  121. [ 0.048684] libata version 3.00 loaded.
  122. [ 0.048782] libphy: Generic Clause 45 PHY: Registered new driver
  123. [ 0.048822] libphy: Generic PHY: Registered new driver
  124. [ 0.049450] pps_core: LinuxPPS API ver. 1 registered
  125. [ 0.049467] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  126. [ 0.049502] PTP clock support registered
  127. [ 0.049658] EDAC MC: Ver: 3.0.0
  128. [ 0.051534] vgaarb: loaded
  129. [ 0.051892] clocksource: Switched to clocksource arch_sys_counter
  130. [ 0.052147] VFS: Disk quotas dquot_6.6.0
  131. [ 0.052213] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  132. [ 0.052430] pnp: PnP ACPI: disabled
  133. [ 0.060624] NET: Registered PF_INET protocol family
  134. [ 0.060873] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  135. [ 0.063461] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  136. [ 0.063568] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  137. [ 0.063601] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  138. [ 0.063742] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  139. [ 0.064059] TCP: Hash tables configured (established 16384 bind 16384)
  140. [ 0.064178] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  141. [ 0.064242] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  142. [ 0.064441] NET: Registered PF_UNIX/PF_LOCAL protocol family
  143. [ 0.064873] RPC: Registered named UNIX socket transport module.
  144. [ 0.064894] RPC: Registered udp transport module.
  145. [ 0.064908] RPC: Registered tcp transport module.
  146. [ 0.064922] RPC: Registered tcp NFSv4.1 backchannel transport module.
  147. [ 0.064944] PCI: CLS 0 bytes, default 64
  148. [ 0.065710] hw perfevents: enabled with armv8_cortex_a35 PMU driver, 7 counters available
  149. [ 0.066535] kvm [1]: IPA Size Limit: 40 bits
  150. [ 0.067977] kvm [1]: GICv3: no GICV resource entry
  151. [ 0.067996] kvm [1]: disabling GICv2 emulation
  152. [ 0.068019] kvm [1]: GIC system register CPU interface enabled
  153. [ 0.068133] kvm [1]: vgic interrupt IRQ9
  154. [ 0.068254] kvm [1]: Hyp mode initialized successfully
  155. [ 0.069749] Initialise system trusted keyrings
  156. [ 0.070007] workingset: timestamp_bits=42 max_order=19 bucket_order=0
  157. [ 0.078570] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  158. [ 0.079410] NFS: Registering the id_resolver key type
  159. [ 0.079485] Key type id_resolver registered
  160. [ 0.079503] Key type id_legacy registered
  161. [ 0.079603] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  162. [ 0.079622] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  163. [ 0.079837] 9p: Installing v9fs 9p2000 file system support
  164. [ 0.125981] Key type asymmetric registered
  165. [ 0.126004] Asymmetric key parser 'x509' registered
  166. [ 0.126067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  167. [ 0.126089] io scheduler mq-deadline registered
  168. [ 0.126105] io scheduler kyber registered
  169. [ 0.130470] EINJ: ACPI disabled.
  170. [ 0.138104] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  171. [ 0.147801] loop: module loaded
  172. [ 0.148770] megasas: 07.719.03.00-rc1
  173. [ 0.151344] libphy: Broadcom BCM72113: Registered new driver
  174. [ 0.151385] libphy: Broadcom BCM72116: Registered new driver
  175. [ 0.151423] libphy: Broadcom BCM72165: Registered new driver
  176. [ 0.151457] libphy: Broadcom BCM7250: Registered new driver
  177. [ 0.151493] libphy: Broadcom BCM7255: Registered new driver
  178. [ 0.151527] libphy: Broadcom BCM7260: Registered new driver
  179. [ 0.151565] libphy: Broadcom BCM7268: Registered new driver
  180. [ 0.151604] libphy: Broadcom BCM7271: Registered new driver
  181. [ 0.151642] libphy: Broadcom BCM7278: Registered new driver
  182. [ 0.151678] libphy: Broadcom BCM7364: Registered new driver
  183. [ 0.151718] libphy: Broadcom BCM7366: Registered new driver
  184. [ 0.151754] libphy: Broadcom BCM74371: Registered new driver
  185. [ 0.151790] libphy: Broadcom BCM7439: Registered new driver
  186. [ 0.151824] libphy: Broadcom BCM7439 (2): Registered new driver
  187. [ 0.151859] libphy: Broadcom BCM7445: Registered new driver
  188. [ 0.151941] libphy: Broadcom BCM7346: Registered new driver
  189. [ 0.151975] libphy: Broadcom BCM7362: Registered new driver
  190. [ 0.152010] libphy: Broadcom BCM7425: Registered new driver
  191. [ 0.152047] libphy: Broadcom BCM7429: Registered new driver
  192. [ 0.152080] libphy: Broadcom BCM7435: Registered new driver
  193. [ 0.152115] libphy: Broadcom BCM7712: Registered new driver
  194. [ 0.152677] mdio_bus fixed-0: probed
  195. [ 0.152719] libphy: Micrel KS8737: Registered new driver
  196. [ 0.152755] libphy: Micrel KSZ8021 or KSZ8031: Registered new driver
  197. [ 0.152791] libphy: Micrel KSZ8031: Registered new driver
  198. [ 0.152826] libphy: Micrel KSZ8041: Registered new driver
  199. [ 0.152861] libphy: Micrel KSZ8041RNLI: Registered new driver
  200. [ 0.152898] libphy: Micrel KSZ8051: Registered new driver
  201. [ 0.152938] libphy: Micrel KSZ8001 or KS8721: Registered new driver
  202. [ 0.152978] libphy: Micrel KSZ8081 or KSZ8091: Registered new driver
  203. [ 0.153016] libphy: Micrel KSZ8061: Registered new driver
  204. [ 0.153051] libphy: Micrel KSZ9021 Gigabit PHY: Registered new driver
  205. [ 0.153093] libphy: Micrel KSZ9031 Gigabit PHY: Registered new driver
  206. [ 0.153134] libphy: Microchip INDY Gigabit Quad PHY: Registered new driver
  207. [ 0.153169] libphy: Microchip LAN966X Gigabit PHY: Registered new driver
  208. [ 0.153208] libphy: Microchip KSZ9131 Gigabit PHY: Registered new driver
  209. [ 0.153253] libphy: Micrel KSZ8873MLL Switch: Registered new driver
  210. [ 0.153292] libphy: Micrel KSZ8851 Ethernet MAC or KSZ886X Switch: Registered new driver
  211. [ 0.153336] libphy: Micrel KSZ87XX Switch: Registered new driver
  212. [ 0.153375] libphy: Microchip KSZ9477: Registered new driver
  213. [ 0.153669] tun: Universal TUN/TAP device driver, 1.6
  214. [ 0.153943] vcan: Virtual CAN interface driver
  215. [ 0.153963] CAN device driver interface
  216. [ 0.154851] e1000: Intel(R) PRO/1000 Network Driver
  217. [ 0.154869] e1000: Copyright (c) 1999-2006 Intel Corporation.
  218. [ 0.154924] e1000e: Intel(R) PRO/1000 Network Driver
  219. [ 0.154938] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  220. [ 0.154992] igb: Intel(R) Gigabit Ethernet Network Driver
  221. [ 0.155007] igb: Copyright (c) 2007-2014 Intel Corporation.
  222. [ 0.155058] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  223. [ 0.155075] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  224. [ 0.155674] VFIO - User Level meta-driver version: 0.3
  225. [ 0.156332] i2c_dev: i2c /dev entries driver
  226. [ 0.158429] sdhci: Secure Digital Host Controller Interface driver
  227. [ 0.158457] sdhci: Copyright(c) Pierre Ossman
  228. [ 0.159019] Synopsys Designware Multimedia Card Interface Driver
  229. [ 0.159547] sdhci-pltfm: SDHCI platform and OF driver helper
  230. [ 0.161219] ledtrig-cpu: registered to indicate activity on CPUs
  231. [ 0.164699] NET: Registered PF_INET6 protocol family
  232. [ 0.165815] Segment Routing with IPv6
  233. [ 0.165886] In-situ OAM (IOAM) with IPv6
  234. [ 0.165950] NET: Registered PF_PACKET protocol family
  235. [ 0.165971] can: controller area network core
  236. [ 0.166029] NET: Registered PF_CAN protocol family
  237. [ 0.166046] can: raw protocol
  238. [ 0.166061] can: broadcast manager protocol
  239. [ 0.166220] 9pnet: Installing 9P2000 support
  240. [ 0.166304] Key type dns_resolver registered
  241. [ 0.166697] registered taskstats version 1
  242. [ 0.166731] Loading compiled-in X.509 certificates
  243. [ 0.178499] imx-scu scu: NXP i.MX SCU Initialized
  244. [ 0.190439] gpt0_clk: failed to attached the power domain -2
  245. [ 0.197577] elcdif_pll: failed to attached the power domain -2
  246. [ 0.215997] mipi_csi0_core_clk: failed to attached the power domain -2
  247. [ 0.216450] mipi_csi0_esc_clk: failed to attached the power domain -2
  248. [ 0.216863] mipi_csi0_i2c0_clk: failed to attached the power domain -2
  249. [ 0.217302] mipi_csi0_pwm0_clk: failed to attached the power domain -2
  250. [ 0.217715] pi_dpll_clk: failed to attached the power domain -2
  251. [ 0.218154] pi_per_div_clk: failed to attached the power domain -2
  252. [ 0.218600] pi_mclk_div_clk: failed to attached the power domain -2
  253. [ 0.222975] imx8qxp-pinctrl scu:pinctrl: initialized IMX pinctrl driver
  254. [ 0.281641] 5a060000.serial: ttyLP0 at MMIO 0x5a060010 (irq = 281, base_baud = 5000000) is a FSL_LPUART
  255. [ 0.282971] 5a080000.serial: ttyLP2 at MMIO 0x5a080010 (irq = 282, base_baud = 0) is a FSL_LPUART
  256. [ 0.284396] 5a090000.serial: ttyLP3 at MMIO 0x5a090010 (irq = 283, base_baud = 5000000) is a FSL_LPUART
  257. [ 0.284445] fsl-lpuart 5a090000.serial: Serial: Console lpuart rounded baud ratefrom 35971 to 115200
  258. [ 1.758576] printk: console [ttyLP3] enabled
  259. [ 1.765876] pps pps0: new PPS source ptp0
  260. [ 1.771733] fec 5b040000.ethernet: ######### pre fec_enet_mii_init ok
  261. [ 1.778237] fec 5b040000.ethernet: #########register ok
  262. [ 1.783918] mdio_bus 5b040000.ethernet-1: probed
  263. [ 1.789475] fec 5b040000.ethernet: #########register after ok
  264. [ 1.796395] fec 5b040000.ethernet eth0: registered PHC device 0
  265. [ 1.804335] i2c i2c-0: LPI2C adapter registered
  266. [ 1.810636] i2c i2c-1: LPI2C adapter registered
  267. [ 1.818646] imx8qxp-lpcg-clk 59580000.clock-controller: deferred probe timeout, ignoring dependency
  268. [ 1.819699] sdhci-esdhc-imx 5b020000.mmc: Got CD GPIO
  269. [ 1.827834] imx8qxp-lpcg-clk: probe of 59580000.clock-controller failed with error -110
  270. [ 1.833487] sdhci-esdhc-imx 5b020000.mmc: drop HS400 support since no 8-bit bus
  271. [ 1.847994] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA
  272. [ 1.848518] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  273. [ 1.879399] mmc1: SDHCI controller on 5b020000.mmc [5b020000.mmc] using ADMA
  274. [ 1.886748] Waiting for root device /dev/mmcblk0p2...
  275. [ 1.900561] mmc0: new HS400 MMC card at address 0001
  276. [ 1.906663] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
  277. [ 1.913085] mmcblk0: p1 p2 p3 p4
  278. [ 1.917980] mmcblk0boot0: mmc0:0001 Q2J55L 16.0 MiB
  279. [ 1.925597] mmcblk0boot1: mmc0:0001 Q2J55L 16.0 MiB
  280. [ 1.932208] mmcblk0rpmb: mmc0:0001 Q2J55L 4.00 MiB, chardev (241:0)
  281. [ 1.957954] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
  282. [ 1.966628] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  283. [ 1.974167] devtmpfs: mounted
  284. [ 1.978038] Freeing unused kernel memory: 2240K
  285. [ 1.982765] Run /sbin/init as init process
  286. [ 1.986899] with arguments:
  287. [ 1.989885] /sbin/init
  288. [ 1.992617] with environment:
  289. [ 1.995762] HOME=/
  290. [ 1.998136] TERM=linux
  291. [ 2.120879] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  292. [ 2.143409] systemd[1]: Detected architecture arm64.
  293. [ 2.192573] systemd[1]: Set hostname to <ff0ba901-eab4-432b-9c46-b15bf216fd40>.
  294. [ 10.559909] random: crng init done
  295. [ 10.566765] systemd[1]: Created slice system-getty.slice.
  296. [ 10.589513] systemd[1]: Created slice system-serial\x2dgetty.slice.
  297. [ 10.613367] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  298. [ 10.637461] systemd[1]: Created slice User and Session Slice.
  299. [ 10.660562] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  300. [ 10.684313] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  301. [ 10.708382] systemd[1]: Reached target Paths.
  302. [ 10.728055] systemd[1]: Reached target Remote File Systems.
  303. [ 10.748033] systemd[1]: Reached target Slices.
  304. [ 10.768080] systemd[1]: Reached target Swap.
  305. [ 10.813705] systemd[1]: Listening on RPCbind Server Activation Socket.
  306. [ 10.836166] systemd[1]: Reached target RPC Port Mapper.
  307. [ 10.856944] systemd[1]: Listening on Syslog Socket.
  308. [ 10.876436] systemd[1]: Listening on initctl Compatibility Named Pipe.
  309. [ 10.901002] systemd[1]: Listening on Journal Audit Socket.
  310. [ 10.924589] systemd[1]: Listening on Journal Socket (/dev/log).
  311. [ 10.948724] systemd[1]: Listening on Journal Socket.
  312. [ 10.968998] systemd[1]: Listening on Network Service Netlink Socket.
  313. [ 10.992735] systemd[1]: Listening on udev Control Socket.
  314. [ 11.016498] systemd[1]: Listening on udev Kernel Socket.
  315. [ 11.041608] systemd[1]: Mounting Huge Pages File System...
  316. [ 11.069505] systemd[1]: Mounting POSIX Message Queue File System...
  317. [ 11.097652] systemd[1]: Mounting Kernel Debug File System...
  318. [ 11.125895] systemd[1]: Mounting Temporary Directory (/tmp)...
  319. [ 11.148442] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  320. [ 11.165231] systemd[1]: Starting RPC Bind...
  321. [ 11.189535] systemd[1]: Starting File System Check on Root Device...
  322. [ 11.220123] systemd[1]: Starting Journal Service...
  323. [ 11.226977] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  324. [ 11.238256] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  325. [ 11.251515] systemd[1]: Mounting Kernel Configuration File System...
  326. [ 11.262986] systemd[1]: Starting Apply Kernel Variables...
  327. [ 11.274202] systemd[1]: Starting udev Coldplug all Devices...
  328. [ 11.288267] systemd[1]: Started RPC Bind.
  329. [ 11.308860] systemd[1]: Started Journal Service.
  330. [ 11.491133] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
  331. [ 11.540497] systemd-journald[185]: Received client request to flush runtime journal.
  332. [ 11.658493] audit: type=1334 audit(11.652:2): prog-id=5 op=LOAD
  333. [ 11.667651] audit: type=1334 audit(11.660:3): prog-id=6 op=LOAD
  334. [ 12.567614] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none.
  335. [ 13.247907] audit: type=1334 audit(1660084389.929:4): prog-id=7 op=LOAD
  336. [ 13.255617] audit: type=1334 audit(1660084389.937:5): prog-id=8 op=LOAD
  337. [ 13.477525] Micrel KSZ8041 5b040000.ethernet-1:02: attached PHY driver (mii_bus:phy_addr=5b040000.ethernet-1:02, irq=POLL)
  338. [ 13.492208] Micrel KSZ8041 5b040000.ethernet-1:02: PHY state change UP -> NOLINK
  339. [ 84.084448] audit: type=1006 audit(1660084460.769:6): pid=286 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
  340. [ 84.096951] audit: type=1300 audit(1660084460.769:6): arch=c00000b7 syscall=64 success=yes exit=1 a0=7 a1=ffffd6ce39f0 a2=1 a3=ffff82bd6a20 items=0 ppid=1 pid=286 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
  341. [ 84.123348] audit: type=1327 audit(1660084460.769:6): proctitle="(systemd)"
  342. [ 84.130433] audit: type=1334 audit(1660084460.785:7): prog-id=9 op=LOAD
  343. [ 84.137202] audit: type=1300 audit(1660084460.785:7): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffeacc1398 a2=70 a3=0 items=0 ppid=1 pid=286 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null)
  344. [ 84.162629] audit: type=1327 audit(1660084460.785:7): proctitle=2F6C69622F73797374656D642F73797374656D64002D2D75736572
  345. [ 84.173481] audit: type=1334 audit(1660084460.805:8): prog-id=0 op=UNLOAD
  346. [ 84.180388] audit: type=1334 audit(1660084460.805:9): prog-id=10 op=LOAD
  347. [ 84.187205] audit: type=1300 audit(1660084460.805:9): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffeacc1418 a2=70 a3=0 items=0 ppid=1 pid=286 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null)
  348. [ 84.212669] audit: type=1327 audit(1660084460.805:9): proctitle=2F6C69622F73797374656D642F73797374656D64002D2D75736572
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!