API tools faq
paste
Advertisement
Bullet64

usb3

Bullet64
Aug 12th, 2018
192
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.03 KB | None | 0 0
raw download clone embed print report
  1. # Boot from USB2
  2.  
  3. Model: Pine64 RockPro64
  4. Net: eth0: ethernet@fe300000
  5. Hit any key to stop autoboot: 0
  6. Card did not respond to voltage select!
  7. mmc_init: -95, time 19
  8. Card did not respond to voltage select!
  9. mmc_init: -95, time 9
  10. starting USB...
  11. USB0: USB EHCI 1.00
  12. USB1: USB EHCI 1.00
  13. USB2: Register 2000140 NbrPorts 2
  14. Starting the controller
  15. USB XHCI 1.10
  16. USB3: Register 2000140 NbrPorts 2
  17. Starting the controller
  18. USB XHCI 1.10
  19. scanning bus 0 for devices... 2 USB Device(s) found
  20. scanning bus 1 for devices... 1 USB Device(s) found
  21. scanning bus 2 for devices... 1 USB Device(s) found
  22. scanning bus 3 for devices... 1 USB Device(s) found
  23. scanning usb for storage devices... 1 Storage Device(s) found
  24.  
  25. Device 0: Vendor: JMicron Rev: 8101 Prod: Generic
  26. Type: Hard Disk
  27. Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
  28. ... is now current device
  29. Scanning usb 0:7...
  30. Found /boot/extlinux/extlinux.conf
  31. Retrieving file: /boot/extlinux/extlinux.conf
  32. ------------------------
  33. # Boot from USB3
  34.  
  35.  
  36.  
  37. Model: Pine64 RockPro64
  38. Net: eth0: ethernet@fe300000
  39. Hit any key to stop autoboot: 0
  40. Card did not respond to voltage select!
  41. mmc_init: -95, time 19
  42. Card did not respond to voltage select!
  43. mmc_init: -95, time 9
  44. starting USB...
  45. USB0: USB EHCI 1.00
  46. USB1: USB EHCI 1.00
  47. USB2: Register 2000140 NbrPorts 2
  48. Starting the controller
  49. USB XHCI 1.10
  50. USB3: Register 2000140 NbrPorts 2
  51. Starting the controller
  52. USB XHCI 1.10
  53. scanning bus 0 for devices... 1 USB Device(s) found
  54. scanning bus 1 for devices... 1 USB Device(s) found
  55. scanning bus 2 for devices... 1 USB Device(s) found
  56. scanning bus 3 for devices... 1 USB Device(s) found
  57. scanning usb for storage devices... 0 Storage Device(s) found
  58.  
  59. Device 0: unknown device
  60. Speed: 1000, full duplex
  61. BOOTP broadcast 1
  62. BOOTP broadcast 2
  63. BOOTP broadcast 3
  64. DHCP client bound to address 192.168.3.15 (1008 ms)
  65. *** Warning: no boot file name; using 'C0A8030F.img'
  66. Using ethernet@fe300000 device
  67. TFTP from server 0.0.0.0; our IP address is 192.168.3.15; sending through gatew1
  68. Filename 'C0A8030F.img'.
  69. Load address: 0x800800
  70. Loading: T
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!