API tools faq
paste
Advertisement
hanni76

dmesg rpi3

hanni76
Dec 27th, 2017
363
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.00 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.15.0-rc5+ (sergey@hanniubuntu) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #39 SMP Wed Dec 27 23:25:19 MSK 2017
  3. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B
  7. [ 0.000000] cma: early_cma(256M@512M)
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] Ignoring RAM at 0x30000000-0x3b400000
  10. [ 0.000000] Consider using a HIGHMEM enabled kernel.
  11. [ 0.000000] cma: dma_contiguous_reserve(limit ffffffff)
  12. [ 0.000000] cma: dma_contiguous_reserve: reserving 256 MiB for global area
  13. [ 0.000000] cma: cma_declare_contiguous(size 0x10000000, base 0x20000000, limit 0x30000000 alignment 0x00000000)
  14. [ 0.000000] cma: Reserved 256 MiB at 0x20000000
  15. [ 0.000000] On node 0 totalpages: 196608
  16. [ 0.000000] Normal zone: 1536 pages used for memmap
  17. [ 0.000000] Normal zone: 0 pages reserved
  18. [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
  19. [ 0.000000] random: fast init done
  20. [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s37836 r8192 d23604 u69632
  21. [ 0.000000] pcpu-alloc: s37836 r8192 d23604 u69632 alloc=17*4096
  22. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  23. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072
  24. [ 0.000000] Kernel command line: earlyprintk dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline rootwait console=tty1 cma=256M@512M console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 ipv6.disable=1 net.ifnames=0 init=/bin/systemd
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 503988K/786432K available (7168K kernel code, 542K rwdata, 2256K rodata, 1024K init, 698K bss, 20300K reserved, 262144K cma-reserved)
  28. [ 0.000000] Virtual kernel memory layout:
  29. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  31. vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  32. lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  33. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  34. .text : 0x(ptrval) - 0x(ptrval) (8160 kB)
  35. .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  36. .data : 0x(ptrval) - 0x(ptrval) ( 543 kB)
  37. .bss : 0x(ptrval) - 0x(ptrval) ( 699 kB)
  38. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [ 0.000000] ftrace: allocating 26420 entries in 78 pages
  40. [ 0.000000] Hierarchical RCU implementation.
  41. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  42. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  43. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  44. [ 0.000012] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  45. [ 0.000033] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  46. [ 0.000088] bcm2835: system timer (irq = 33)
  47. [ 0.000432] arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  48. [ 0.000442] arch_timer: WARNING: Please fix your firmware
  49. [ 0.000454] arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  50. [ 0.000462] arch_timer: WARNING: Please fix your firmware
  51. [ 0.000540] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  52. [ 0.000558] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  53. [ 0.000577] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  54. [ 0.000593] Switching to timer-based delay loop, resolution 52ns
  55. [ 0.000844] Console: colour dummy device 80x30
  56. [ 0.001671] console [tty1] enabled
  57. [ 0.001712] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  58. [ 0.001756] pid_max: default: 32768 minimum: 301
  59. [ 0.002055] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  60. [ 0.002090] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  61. [ 0.002917] CPU: Testing write buffer coherency: ok
  62. [ 0.003331] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  63. [ 0.003726] Setting up static identity map for 0x100000 - 0x100054
  64. [ 0.003863] Hierarchical SRCU implementation.
  65. [ 0.006528] smp: Bringing up secondary CPUs ...
  66. [ 0.007293] arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  67. [ 0.007297] arch_timer: WARNING: Please fix your firmware
  68. [ 0.007305] arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  69. [ 0.007308] arch_timer: WARNING: Please fix your firmware
  70. [ 0.007324] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  71. [ 0.008148] arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  72. [ 0.008152] arch_timer: WARNING: Please fix your firmware
  73. [ 0.008158] arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  74. [ 0.008161] arch_timer: WARNING: Please fix your firmware
  75. [ 0.008175] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  76. [ 0.008970] arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  77. [ 0.008974] arch_timer: WARNING: Please fix your firmware
  78. [ 0.008980] arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  79. [ 0.008983] arch_timer: WARNING: Please fix your firmware
  80. [ 0.008997] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  81. [ 0.009109] smp: Brought up 1 node, 4 CPUs
  82. [ 0.009426] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  83. [ 0.009449] CPU: All CPU(s) started in HYP mode.
  84. [ 0.009468] CPU: Virtualization extensions available.
  85. [ 0.010578] devtmpfs: initialized
  86. [ 0.017498] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  87. [ 0.017749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  88. [ 0.017797] futex hash table entries: 1024 (order: 4, 65536 bytes)
  89. [ 0.030860] pinctrl core: initialized pinctrl subsystem
  90. [ 0.031359] NET: Registered protocol family 16
  91. [ 0.031936] cma: cma_alloc(cma 0e24a9fe, count 64, align 6)
  92. [ 0.033224] cma: cma_alloc(): returned 2b8e2850
  93. [ 0.033523] DMA: preallocated 256 KiB pool for atomic coherent allocations
  94. [ 0.036905] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  95. [ 0.036940] hw-breakpoint: maximum watchpoint size is 8 bytes.
  96. [ 0.037129] Serial: AMBA PL011 UART driver
  97. [ 0.039420] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_gpio32, deferring probe
  98. [ 0.051980] SCSI subsystem initialized
  99. [ 0.052229] usbcore: registered new interface driver usbfs
  100. [ 0.052303] usbcore: registered new interface driver hub
  101. [ 0.052403] usbcore: registered new device driver usb
  102. [ 0.052875] Advanced Linux Sound Architecture Driver Initialized.
  103. [ 0.054090] clocksource: Switched to clocksource arch_sys_counter
  104. [ 0.115757] simple-framebuffer 3eace000.framebuffer: framebuffer at 0x3eace000, 0x12c000 bytes, mapped to 0x44ca1a7b
  105. [ 0.115816] simple-framebuffer 3eace000.framebuffer: format=a8r8g8b8, mode=640x480x32, linelength=2560
  106. [ 0.124404] Console: switching to colour frame buffer device 80x30
  107. [ 0.138518] simple-framebuffer 3eace000.framebuffer: fb0: simplefb registered!
  108. [ 0.160028] NET: Registered protocol family 2
  109. [ 0.166920] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  110. [ 0.173356] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  111. [ 0.179851] TCP: Hash tables configured (established 8192 bind 8192)
  112. [ 0.186233] UDP hash table entries: 512 (order: 2, 16384 bytes)
  113. [ 0.192439] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  114. [ 0.198769] NET: Registered protocol family 1
  115. [ 0.205262] RPC: Registered named UNIX socket transport module.
  116. [ 0.211289] RPC: Registered udp transport module.
  117. [ 0.217261] RPC: Registered tcp transport module.
  118. [ 0.223027] RPC: Registered tcp NFSv4.1 backchannel transport module.
  119. [ 0.231770] Initialise system trusted keyrings
  120. [ 0.237590] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  121. [ 0.251218] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  122. [ 0.261137] Key type asymmetric registered
  123. [ 0.266855] Asymmetric key parser 'x509' registered
  124. [ 0.272452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  125. [ 0.283669] io scheduler noop registered
  126. [ 0.289444] io scheduler deadline registered (default)
  127. [ 0.295466] io scheduler cfq registered
  128. [ 0.301186] io scheduler mq-deadline registered (default)
  129. [ 0.306915] io scheduler kyber registered
  130. [ 0.318301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  131. [ 0.325284] 3f215040.serial: ttyS1 at MMIO 0x0 (irq = 59, base_baud = 31250000) is a 16550
  132. [ 0.339198] libphy: Fixed MDIO Bus: probed
  133. [ 0.344817] usbcore: registered new interface driver zd1211rw
  134. [ 0.350244] usbcore: registered new interface driver asix
  135. [ 0.355481] usbcore: registered new interface driver ax88179_178a
  136. [ 0.360622] usbcore: registered new interface driver cdc_ether
  137. [ 0.365638] usbcore: registered new interface driver smsc95xx
  138. [ 0.370461] usbcore: registered new interface driver net1080
  139. [ 0.375153] usbcore: registered new interface driver cdc_subset
  140. [ 0.379690] usbcore: registered new interface driver zaurus
  141. [ 0.384115] usbcore: registered new interface driver cdc_ncm
  142. [ 0.388806] usbcore: registered new interface driver usb-storage
  143. [ 0.393198] i2c /dev entries driver
  144. [ 0.398268] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
  145. [ 0.403658] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  146. [ 0.408479] sdhci: Secure Digital Host Controller Interface driver
  147. [ 0.412928] sdhci: Copyright(c) Pierre Ossman
  148. [ 0.554126] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
  149. [ 0.558652] sdhci-pltfm: SDHCI platform and OF driver helper
  150. [ 0.624119] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
  151. [ 0.633586] ledtrig-cpu: registered to indicate activity on CPUs
  152. [ 0.646148] usbcore: registered new interface driver usbhid
  153. [ 0.650650] usbhid: USB HID core driver
  154. [ 0.655544] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  155. [ 0.663607] oprofile: no performance counters
  156. [ 0.668357] oprofile: using timer interrupt.
  157. [ 0.674449] IPv6: Loaded, but administratively disabled, reboot required to enable
  158. [ 0.683605] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  159. [ 0.688811] NET: Registered protocol family 17
  160. [ 0.693961] Registering SWP/SWPB emulation handler
  161. [ 0.699154] Loading compiled-in X.509 certificates
  162. [ 0.707410] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  163. [ 0.711385] mmc0: host does not support reading read-only switch, assuming write-enable
  164. [ 0.713260] mmc0: new high speed SDHC card at address 59b4
  165. [ 0.713697] mmcblk0: mmc0:59b4 00000 14.9 GiB
  166. [ 0.714248] cma: cma_alloc(cma 0e24a9fe, count 1, align 0)
  167. [ 1.678325] console [ttyAMA0] enabled
  168. [ 1.689504] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-12-01 16:16
  169. [ 1.689629] cma: cma_alloc(): returned 66997767
  170. [ 1.690361] mmcblk0: p1 p2
  171. [ 1.719779] cma: cma_alloc(cma 0e24a9fe, count 128, align 7)
  172. [ 1.719897] cma: cma_alloc(): returned 544ec873
  173. [ 1.720497] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
  174. [ 1.740114] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops)
  175. [ 1.752533] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops)
  176. [ 1.764617] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops)
  177. [ 1.776698] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops)
  178. [ 1.789379] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops)
  179. [ 1.801839] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops)
  180. [ 1.814043] cma: cma_alloc(cma 0e24a9fe, count 4096, align 8)
  181. [ 1.815020] cma: cma_alloc(): returned 94dc43fe
  182. [ 1.833251] ------------[ cut here ]------------
  183. [ 1.843169] WARNING: CPU: 2 PID: 31 at kernel/irq/chip.c:244 __irq_startup+0x50/0xb4
  184. [ 1.861610] Modules linked in:
  185. [ 1.869974] CPU: 2 PID: 31 Comm: kworker/2:1 Not tainted 4.15.0-rc5+ #39
  186. [ 1.882229] Hardware name: BCM2835
  187. [ 1.891057] Workqueue: events deferred_probe_work_func
  188. [ 1.901612] [<c0110af4>] (unwind_backtrace) from [<c010c7e0>] (show_stack+0x20/0x24)
  189. [ 1.920184] [<c010c7e0>] (show_stack) from [<c079163c>] (dump_stack+0x8c/0xb4)
  190. [ 1.938637] [<c079163c>] (dump_stack) from [<c0120ab8>] (__warn+0xe8/0x104)
  191. [ 1.951420] [<c0120ab8>] (__warn) from [<c0120bc0>] (warn_slowpath_null+0x4c/0x58)
  192. [ 1.970297] [<c0120bc0>] (warn_slowpath_null) from [<c0173fa0>] (__irq_startup+0x50/0xb4)
  193. [ 1.989900] [<c0173fa0>] (__irq_startup) from [<c0174060>] (irq_startup+0x5c/0x120)
  194. [ 2.009357] [<c0174060>] (irq_startup) from [<c0171fb0>] (__enable_irq+0x70/0x80)
  195. [ 2.028817] [<c0171fb0>] (__enable_irq) from [<c0172030>] (enable_irq+0x70/0x80)
  196. [ 2.048546] [<c0172030>] (enable_irq) from [<c049d374>] (vc4_irq_postinstall+0x20/0x44)
  197. [ 2.068999] [<c049d374>] (vc4_irq_postinstall) from [<c046fb84>] (drm_irq_install+0xe0/0x120)
  198. [ 2.090537] [<c046fb84>] (drm_irq_install) from [<c04a017c>] (vc4_v3d_bind+0x1c0/0x224)
  199. [ 2.112233] [<c04a017c>] (vc4_v3d_bind) from [<c04a2e08>] (component_bind_all+0x140/0x228)
  200. [ 2.134931] [<c04a2e08>] (component_bind_all) from [<c0494070>] (vc4_drm_bind+0x90/0x138)
  201. [ 2.157638] [<c0494070>] (vc4_drm_bind) from [<c04a297c>] (try_to_bring_up_master+0x1ec/0x250)
  202. [ 2.181150] [<c04a297c>] (try_to_bring_up_master) from [<c04a2aa0>] (component_add+0xc0/0x120)
  203. [ 2.204906] [<c04a2aa0>] (component_add) from [<c049fbc4>] (vc4_v3d_dev_probe+0x20/0x28)
  204. [ 2.228273] [<c049fbc4>] (vc4_v3d_dev_probe) from [<c04aa7e8>] (platform_drv_probe+0x60/0xac)
  205. [ 2.252096] [<c04aa7e8>] (platform_drv_probe) from [<c04a8d20>] (driver_probe_device+0x2d8/0x474)
  206. [ 2.276386] [<c04a8d20>] (driver_probe_device) from [<c04a90b8>] (__device_attach_driver+0xb0/0x104)
  207. [ 2.301002] [<c04a90b8>] (__device_attach_driver) from [<c04a6ea8>] (bus_for_each_drv+0x98/0xa0)
  208. [ 2.325264] [<c04a6ea8>] (bus_for_each_drv) from [<c04a8940>] (__device_attach+0xac/0x138)
  209. [ 2.348988] [<c04a8940>] (__device_attach) from [<c04a9128>] (device_initial_probe+0x1c/0x20)
  210. [ 2.372988] [<c04a9128>] (device_initial_probe) from [<c04a7cb4>] (bus_probe_device+0x38/0x90)
  211. [ 2.397099] [<c04a7cb4>] (bus_probe_device) from [<c04a82e0>] (deferred_probe_work_func+0x124/0x144)
  212. [ 2.421767] [<c04a82e0>] (deferred_probe_work_func) from [<c01383a4>] (process_one_work+0x25c/0x41c)
  213. [ 2.446433] [<c01383a4>] (process_one_work) from [<c0139574>] (worker_thread+0x2e0/0x478)
  214. [ 2.470106] [<c0139574>] (worker_thread) from [<c013e158>] (kthread+0x14c/0x164)
  215. [ 2.492969] [<c013e158>] (kthread) from [<c01080e8>] (ret_from_fork+0x14/0x2c)
  216. [ 2.515617] ---[ end trace 03b9a7dd066c1b6f ]---
  217. [ 2.527931] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops)
  218. [ 2.541681] checking generic (3eace000 12c000) vs hw (0 ffffffff)
  219. [ 2.541686] fb: switching to vc4drmfb from simple
  220. [ 2.554025] Console: switching to colour dummy device 80x30
  221. [ 2.560818] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
  222. [ 2.567472] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  223. [ 2.574113] [drm] Driver supports precise vblank timestamp query.
  224. [ 2.606062] cma: cma_alloc(cma 0e24a9fe, count 1280, align 8)
  225. [ 2.606673] cma: cma_alloc(): returned cd0eade3
  226. [ 2.667894] Console: switching to colour frame buffer device 160x64
  227. [ 2.707729] vc4-drm soc:gpu: fb0: frame buffer device
  228. [ 2.764105] cma: cma_alloc(cma 0e24a9fe, count 1, align 0)
  229. [ 2.764237] cma: cma_alloc(): returned 3b146621
  230. [ 2.764262] dwc2 3f980000.usb: DWC OTG Controller
  231. [ 2.769186] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
  232. [ 2.776548] dwc2 3f980000.usb: irq 39, io mem 0x3f980000
  233. [ 2.782937] hub 1-0:1.0: USB hub found
  234. [ 2.786894] hub 1-0:1.0: 1 port detected
  235. [ 2.792675] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  236. [ 2.804359] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  237. [ 2.811199] ALSA device list:
  238. [ 2.814310] #0: vc4-hdmi
  239. [ 2.817218] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  240. [ 2.826174] cfg80211: failed to load regulatory.db
  241. [ 2.831297] uart-pl011 3f201000.serial: no DMA platform data
  242. [ 2.852319] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: commit=100,data=writeback
  243. [ 2.862687] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  244. [ 2.874988] devtmpfs: mounted
  245. [ 2.883833] Freeing unused kernel memory: 1024K
  246. [ 3.224156] usb 1-1: new high-speed USB device number 2 using dwc2
  247. [ 3.263671] systemd[1]: System time before build time, advancing clock.
  248. [ 3.320095] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  249. [ 3.339450] systemd[1]: Detected architecture arm.
  250. [ 3.376253] systemd[1]: Set hostname to <raspberrypi>.
  251. [ 3.475125] hub 1-1:1.0: USB hub found
  252. [ 3.479147] hub 1-1:1.0: 5 ports detected
  253. [ 3.798614] systemd[1]: Listening on udev Control Socket.
  254. [ 3.804361] usb 1-1.1: new high-speed USB device number 3 using dwc2
  255. [ 3.844542] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  256. [ 3.884631] systemd[1]: Listening on Network Service Netlink Socket.
  257. [ 3.924483] systemd[1]: Listening on Journal Socket (/dev/log).
  258. [ 3.937348] smsc95xx v1.0.6
  259. [ 3.964385] systemd[1]: Reached target Swap.
  260. [ 3.994688] cma: cma_release(page 94dc43fe)
  261. [ 4.010167] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  262. [ 4.029502] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:27:c4:5d
  263. [ 4.055481] systemd[1]: Listening on Journal Socket.
  264. [ 4.174148] usb 1-1.4: new low-speed USB device number 4 using dwc2
  265. [ 4.234126] mmc1: error -110 whilst initialising SDIO card
  266. [ 4.333423] cma: cma_alloc(cma 0e24a9fe, count 1, align 0)
  267. [ 4.333883] cma: cma_alloc(): returned 0650e3f3
  268. [ 4.334324] input: HID 0e8f:2517 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0E8F:2517.0001/input/input0
  269. [ 4.424927] hid-generic 0003:0E8F:2517.0001: input: USB HID v1.10 Keyboard [HID 0e8f:2517] on usb-3f980000.usb-1.4/input0
  270. [ 4.459638] input: HID 0e8f:2517 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:0E8F:2517.0002/input/input1
  271. [ 4.555717] hid-generic 0003:0E8F:2517.0002: input: USB HID v1.10 Mouse [HID 0e8f:2517] on usb-3f980000.usb-1.4/input1
  272. [ 5.081295] random: crng init done
  273. [ 7.424135] mmc1: error -110 whilst initialising SDIO card
  274. [ 8.693479] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro,discard,data=writeback,commit=100
  275. [ 8.913136] systemd-journald[99]: Received request to flush runtime journal from PID 1
  276. [ 9.597871] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  277. [ 10.064495] bcm2835-rng 3f104000.rng: hwrng registered
  278. [ 10.624142] mmc1: error -110 whilst initialising SDIO card
  279. [ 11.127980] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  280. [ 11.354675] cma: cma_alloc(cma 0e24a9fe, count 1, align 0)
  281. [ 11.355028] cma: cma_alloc(): returned 0e5a345c
  282. [ 13.784119] mmc1: error -110 whilst initialising SDIO card
  283. [ 37.734160] systemd[1]: apt-daily.timer: Adding 10h 19min 12.762495s random time.
  284. [ 38.665970] systemd[1]: apt-daily.timer: Adding 57min 14.301103s random time.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!