Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ###################### Filebeat Configuration Example #########################
- # This file is an example configuration file highlighting only the most common
- # options. The filebeat.reference.yml file from the same directory contains all the
- # supported options with more comments. You can use it as a reference.
- #
- # You can find the full configuration reference here:
- # https://www.elastic.co/guide/en/beats/filebeat/index.html
- # For more available modules and options, please see the filebeat.reference.yml sample
- # configuration file.
- #=========================== Filebeat prospectors =============================
- filebeat.prospectors:
- # Each - is a prospector. Most options can be set at the prospector level, so
- # you can use different prospectors for various configurations.
- # Below are the prospector specific configurations.
- - type: log
- # Change to true to enable this prospector configuration.
- enabled: true
- # Paths that should be crawled and fetched. Glob based paths.
- paths:
- - /home/ubuntu/Documents/apache_example/firsthalf.log
- #- c:\programdata\elasticsearch\logs\*
- # Exclude lines. A list of regular expressions to match. It drops the lines that are
- # matching any regular expression from the list.
- #exclude_lines: ['^DBG']
- # Include lines. A list of regular expressions to match. It exports the lines that are
- # matching any regular expression from the list.
- #include_lines: ['^ERR', '^WARN']
- # Exclude files. A list of regular expressions to match. Filebeat drops the files that
- # are matching any regular expression from the list. By default, no files are dropped.
- #exclude_files: ['.gz$']
- # Optional additional fields. These fields can be freely picked
- # to add additional information to the crawled log files for filtering
- #fields:
- # level: debug
- # review: 1
- ### Multiline options
- # Mutiline can be used for log messages spanning multiple lines. This is common
- # for Java Stack Traces or C-Line Continuation
- # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
- #multiline.pattern: ^\[
- # Defines if the pattern set under pattern should be negated or not. Default is false.
- #multiline.negate: false
- # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
- # that was (not) matched before or after or as long as a pattern is not matched based on negate.
- # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
- #multiline.match: after
- #============================= Filebeat modules ===============================
- filebeat.config.modules:
- # Glob pattern for configuration loading
- path: ${path.config}/modules.d/*.yml
- # Set to true to enable config reloading
- reload.enabled: false
- # Period on which files under path should be checked for changes
- #reload.period: 10s
- #==================== Elasticsearch template setting ==========================
- setup.template.settings:
- index.number_of_shards: 3
- #index.codec: best_compression
- #_source.enabled: false
- #================================ General =====================================
- # The name of the shipper that publishes the network data. It can be used to group
- # all the transactions sent by a single shipper in the web interface.
- #name:
- # The tags of the shipper are included in their own field with each
- # transaction published.
- #tags: ["service-X", "web-tier"]
- # Optional fields that you can specify to add additional information to the
- # output.
- #fields:
- # env: staging
- #============================== Dashboards =====================================
- # These settings control loading the sample dashboards to the Kibana index. Loading
- # the dashboards is disabled by default and can be enabled either by setting the
- # options here, or by using the `-setup` CLI flag or the `setup` command.
- #setup.dashboards.enabled: false
- # The URL from where to download the dashboards archive. By default this URL
- # has a value which is computed based on the Beat name and version. For released
- # versions, this URL points to the dashboard archive on the artifacts.elastic.co
- # website.
- #setup.dashboards.url:
- #============================== Kibana =====================================
- # Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
- # This requires a Kibana endpoint configuration.
- setup.kibana:
- # Kibana Host
- # Scheme and port can be left out and will be set to the default (http and 5601)
- # In case you specify and additional path, the scheme is required: http://localhost:5601/path
- # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
- #host: "localhost:5601"
- #============================= Elastic Cloud ==================================
- # These settings simplify using filebeat with the Elastic Cloud (https://cloud.elastic.co/).
- # The cloud.id setting overwrites the `output.elasticsearch.hosts` and
- # `setup.kibana.host` options.
- # You can find the `cloud.id` in the Elastic Cloud web UI.
- #cloud.id:
- # The cloud.auth setting overwrites the `output.elasticsearch.username` and
- # `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
- #cloud.auth:
- #================================ Outputs =====================================
- # Configure what output to use when sending the data collected by the beat.
- #-------------------------- Elasticsearch output ------------------------------
- #output.elasticsearch:
- # Array of hosts to connect to.
- #hosts: ["localhost:9200"]
- # Optional protocol and basic auth credentials.
- #protocol: "https"
- #username: "elastic"
- #password: "changeme"
- #----------------------------- Logstash output --------------------------------
- output.logstash:
- # The Logstash hosts
- hosts: ["10.0.2.4:5050"]
- # Optional SSL. By default is off.
- # List of root certificates for HTTPS server verifications
- #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
- # Certificate for SSL client authentication
- #ssl.certificate: "/etc/pki/client/cert.pem"
- # Client Certificate Key
- #ssl.key: "/etc/pki/client/cert.key"
- #================================ Logging =====================================
- # Sets log level. The default log level is info.
- # Available log levels are: error, warning, info, debug
- #logging.level: debug
- # At debug level, you can selectively enable logging only for some components.
- # To enable all selectors use ["*"]. Examples of other selectors are "beat",
- # "publish", "service".
- #logging.selectors: ["*"]
- #============================== Xpack Monitoring ===============================
- # filebeat can export internal metrics to a central Elasticsearch monitoring
- # cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
- # reporting is disabled by default.
- # Set to true to enable the monitoring reporter.
- #xpack.monitoring.enabled: false
- # Uncomment to send the metrics to Elasticsearch. Most settings from the
- # Elasticsearch output are accepted here as well. Any setting that is not set is
- # automatically inherited from the Elasticsearch output configuration, so if you
- # have the Elasticsearch output configured, you can simply uncomment the
- # following line.
- #xpack.monitoring.elasticsearch:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement