API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 22nd, 2020
88
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.42 KB | None | 0 0
raw download clone embed print report
  1. ~ # dmesg | grep -i touch
  2. <6>[ 0.564118 / 01-01 00:00:00.549] dsi_panel_device_register: touch_en gpio not specified
  3. <6>[ 0.647987 / 01-01 00:00:00.639] usbcore: registered new interface driver ums-onetouch
  4. <3>[ 0.650915 / 01-01 00:00:00.639] [TOUCH][F][COMMON] touch_init()
  5. <3>[ 0.650928 / 01-01 00:00:00.639] [TOUCH][F][PLATFORM] TouchInitializePlatform()
  6. <3>[ 0.650963 / 01-01 00:00:00.639] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
  7. <3>[ 0.666531 / 01-01 00:00:00.659] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
  8. <3>[ 0.776512 / 01-01 00:00:00.769] [TOUCH][L][MIT200] Device was reset
  9. <3>[ 0.776528 / 01-01 00:00:00.769] [TOUCH][F][MIT200] MIT200_Connect()
  10. <3>[ 0.776655 / 01-01 00:00:00.769] [TOUCH][E][COMMON] touch_init() line=2592 : ######## [unified_driver,ver2] ##########
  11. <3>[ 0.777301 / 01-01 00:00:00.769] [TOUCH][F][COMMON] touch_probe()
  12. <3>[ 0.777318 / 01-01 00:00:00.769] [TOUCH][L][COMMON] STATE = BOOT
  13. <3>[ 0.777332 / 01-01 00:00:00.769] [TOUCH][L][MODEL] ======== Model Configuration ( Begin ) ========
  14. <3>[ 0.777345 / 01-01 00:00:00.769] [TOUCH][L][MODEL] button_support=0
  15. <3>[ 0.777357 / 01-01 00:00:00.769] [TOUCH][L][MODEL] number_of_button=0
  16. <3>[ 0.777370 / 01-01 00:00:00.769] [TOUCH][L][MODEL] button_name[0]=0
  17. <3>[ 0.777382 / 01-01 00:00:00.769] [TOUCH][L][MODEL] button_name[1]=0
  18. <3>[ 0.777394 / 01-01 00:00:00.769] [TOUCH][L][MODEL] button_name[2]=0
  19. <3>[ 0.777407 / 01-01 00:00:00.769] [TOUCH][L][MODEL] button_name[3]=0
  20. <3>[ 0.777419 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_x=480
  21. <3>[ 0.777431 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_y=854
  22. <3>[ 0.777444 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_pressure=255
  23. <3>[ 0.777456 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_width=30
  24. <3>[ 0.777468 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_orientation=1
  25. <3>[ 0.777481 / 01-01 00:00:00.769] [TOUCH][L][MODEL] max_id=10
  26. <3>[ 0.777493 / 01-01 00:00:00.769] [TOUCH][L][MODEL] protocol_type=MT_PROTOCOL_B
  27. <3>[ 0.777506 / 01-01 00:00:00.769] [TOUCH][L][MODEL] ======== Model Configuration ( End ) ========
  28. <3>[ 0.777518 / 01-01 00:00:00.769] [TOUCH][F][COMMON] register_input_dev()
  29. <6>[ 0.777698 / 01-01 00:00:00.769] input: touch_dev as /devices/virtual/input/input0
  30. <3>[ 0.777796 / 01-01 00:00:00.769] [TOUCH][F][COMMON] sysfs_register()
  31. <3>[ 0.777992 / 01-01 00:00:00.769] [TOUCH][F][MIT200] MIT200_Initialize()
  32. <3>[ 0.778008 / 01-01 00:00:00.769] [TOUCH][F][MIT200] mip_dev_create()
  33. <3>[ 0.778730 / 01-01 00:00:00.769] [TOUCH][F][MIT200] MIT200_ReadIcFirmwareInfo()
  34. <3>[ 0.778955 / 01-01 00:00:00.769] [TOUCH][L][MIT200] IC F/W Version = v1.01 ( Official Release )
  35. <3>[ 0.778971 / 01-01 00:00:00.769] [TOUCH][F][MIT200] MIT200_GetBinFirmwareInfo()
  36. <3>[ 0.778985 / 01-01 00:00:00.769] [TOUCH][L][MIT200] Firmware filename = melfas/m1_spr_us/fw.bin
  37. <3>[ 0.779003 / 01-01 00:00:00.769] [TOUCH][L][MIT200] BIN F/W Version = v1.01 ( Official Release )
  38. <3>[ 0.779017 / 01-01 00:00:00.769] [TOUCH][L][COMMON] [touch_probe] pDriverData->bootMode != BOOT_OFF_CHARGING
  39. <3>[ 0.779030 / 01-01 00:00:00.769] [TOUCH][L][COMMON] TouchIrqHandler will be Registered
  40. <3>[ 0.779041 / 01-01 00:00:00.769] [TOUCH][F][PLATFORM] TouchRegisterIrq()
  41. <3>[ 0.779208 / 01-01 00:00:00.769] [TOUCH][L][COMMON] STATE = NORMAL
  42. <3>[ 0.779250 / 01-01 00:00:00.769] [TOUCH][L][PLATFORM] Interrupt Disabled
  43. <3>[ 0.779267 / 01-01 00:00:00.769] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
  44. <3>[ 0.779351 / 01-01 00:00:00.769] [TOUCH][E][PLATFORM] Mit200_proc4_I2C_Write() line=426 : failed to write i2c ( reg = 799 )
  45. <3>[ 0.779367 / 01-01 00:00:00.769] [TOUCH][E][MIT200] mip_lpwg_debug_enable() line=258 : LPWG debug Setting failed
  46. <3>[ 0.779381 / 01-01 00:00:00.769] [TOUCH][L][MIT200] [MIT200_lpwg_debug_enable_set_status] lpwg_debug_enable status = 0
  47. <3>[ 0.779395 / 01-01 00:00:00.769] [TOUCH][L][COMMON] sensor_value set to 0, enable_sensor_interlock set to 1
  48. <3>[ 0.796515 / 01-01 00:00:00.789] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
  49. <3>[ 0.906505 / 01-01 00:00:00.899] [TOUCH][L][MIT200] Device was reset
  50. <3>[ 0.906660 / 01-01 00:00:00.899] [TOUCH][L][COMMON] STATE = NORMAL
  51. <3>[ 0.906677 / 01-01 00:00:00.899] [TOUCH][L][PLATFORM] Interrupt Enabled
  52. <3>[ 2.434152 / 01-01 00:06:46.289] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  53. <3>[ 2.434160 / 01-01 00:06:46.289] [TOUCH][F][COMMON] DecideNextDriverState()
  54. <3>[ 2.434165 / 01-01 00:06:46.289] [TOUCH][E][COMMON] DecideNextDriverState() line=931 : Invalid Mode Setting ( mode = -1 )
  55. <3>[ 2.434170 / 01-01 00:06:46.289] [TOUCH][E][COMMON] DecideNextDriverState() line=932 : State was forcely changed to Normal
  56. <3>[ 2.434173 / 01-01 00:06:46.289] [TOUCH][F][MIT200] MIT200_SetLpwgMode()
  57. <3>[ 2.434176 / 01-01 00:06:46.289] [TOUCH][F][MIT200] lpwg_control()
  58. <3>[ 2.434179 / 01-01 00:06:46.289] [TOUCH][L][MIT200] currState = [0], newState = [2]
  59. <3>[ 2.434182 / 01-01 00:06:46.289] [TOUCH][L][MIT200] device was set to NORMAL
  60. <3>[ 2.434184 / 01-01 00:06:46.289] [TOUCH][L][COMMON] STATE = NORMAL
  61. <3>[ 2.434202 / 01-01 00:06:46.289] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  62. <3>[ 2.434339 / 01-01 00:06:46.289] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  63. <3>[ 2.434345 / 01-01 00:06:46.289] [TOUCH][L][MIT200] gp93 set to high, sensor far
  64. <3>[ 2.434349 / 01-01 00:06:46.289] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
  65. <3>[ 2.446520 / 01-01 00:06:46.309] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
  66. <3>[ 2.476690 / 01-01 00:06:46.339] [TOUCH][F][COMMON] DecideNextDriverState()
  67. <3>[ 2.476693 / 01-01 00:06:46.339] [TOUCH][L][COMMON] next = STATE_NORMAL_HOVER
  68. <3>[ 2.476696 / 01-01 00:06:46.339] [TOUCH][F][MIT200] MIT200_SetLpwgMode()
  69. <3>[ 2.476699 / 01-01 00:06:46.339] [TOUCH][L][MIT200] device state is same as driver requested
  70. <3>[ 2.476701 / 01-01 00:06:46.339] [TOUCH][L][COMMON] STATE = NORMAL
  71. <3>[ 2.476728 / 01-01 00:06:46.339] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  72. <3>[ 2.476760 / 01-01 00:06:46.339] [TOUCH][L][PLATFORM] Interrupt Disabled
  73. <3>[ 2.476764 / 01-01 00:06:46.339] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
  74. <3>[ 2.496519 / 01-01 00:06:46.359] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
  75. <3>[ 2.547427 / 01-01 00:06:46.409] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  76. <3>[ 2.606533 / 01-01 00:06:46.469] [TOUCH][L][MIT200] Device was reset
  77. <3>[ 2.606974 / 01-01 00:06:46.469] [TOUCH][L][COMMON] STATE = NORMAL
  78. <3>[ 2.606982 / 01-01 00:06:46.469] [TOUCH][L][PLATFORM] Interrupt Enabled
  79. <3>[ 2.623319 / 01-01 00:06:46.479] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  80. <3>[ 2.673342 / 01-01 00:06:46.529] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  81. <3>[ 5.506693 / 03-21 05:03:41.257] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  82. <3>[ 25.056835 / 03-21 05:04:00.807] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  83. <3>[ 47.623652 / 03-21 05:04:23.367] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  84. <3>[ 67.190443 / 03-21 05:04:42.937] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  85. <3>[ 84.757230 / 03-21 05:05:00.507] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  86. <3>[ 144.374303 / 03-21 05:06:00.117] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  87. <3>[ 204.991381 / 03-21 05:07:00.737] [TOUCH][F][COMMON] touch_fb_notifier_callback()
  88. <3>[ 227.558201 / 03-21 05:07:23.307] [TOUCH][F][COMMON] touch_fb_notifier_callback()
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!