API tools faq
paste
Guest User

Untitled

a guest
Dec 2nd, 2022
214
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.17 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2019.04.1-+g0353addb55 (Sep 30 2021 - 19:15:59 +0000)
  2. power_bd71837_init
  3. Board id: 6
  4. DDRINFO: start DRAM init
  5. DDRINFO:ddrphy calibration done
  6. DDRINFO: ddrmix config done
  7. Normal Boot
  8. Trying to boot from MMC2
  9. hdr read sector 300, count=1
  10.  
  11.  
  12. U-Boot 2019.04.1-+g0353addb55 (Sep 30 2021 - 19:15:59 +0000)
  13.  
  14. CPU: Freescale i.MX8MQ rev2.1 1500 MHz (running at 1000 MHz)
  15. CPU: Commercial temperature grade (0C to 95C) at 43C
  16. Reset cause: POR
  17. Model: Freescale i.MX8MQ Phanbell
  18. DRAM: 1 GiB
  19. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  20. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  21.  
  22. In: serial
  23. Out: serial
  24. Err: serial
  25.  
  26. BuildInfo:
  27. - ATF c688807
  28. - U-Boot 2019.04.1-+g0353addb55
  29.  
  30. flash target is MMC:0
  31. Net:
  32. Warning: ethernet@30be0000 using MAC address from ROM
  33. eth0: ethernet@30be0000
  34. Fastboot: Normal
  35. Normal Boot
  36. Hit any key to stop autoboot: 0
  37. 1713 bytes read in 10 ms (167 KiB/s)
  38. ## Executing script at 40480000
  39. 33630720 bytes read in 2453 ms (13.1 MiB/s)
  40. 34201 bytes read in 12 ms (2.7 MiB/s)
  41. ## Flattened Device Tree blob at 43000000
  42. Booting using the fdt blob at 0x43000000
  43. Using Device Tree in place at 0000000043000000, end 000000004300bfff
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  48. [ 0.000000] Linux version 5.15.78-fslc+ga6f23772003a (oe-user@oe-host) (aarch64-fslc-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sun Nov 13 15:09:41 UTC 2022
  49. [ 0.000000] Machine model: Google i.MX8MQ Phanbell
  50. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
  51. [ 0.000000] printk: bootconsole [ec_imx6q0] enabled
  52. [ 0.000000] efi: UEFI not found.
  53. [ 0.000000] NUMA: No NUMA configuration found
  54. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  55. [ 0.000000] NUMA: NODE_DATA [mem 0x7fdd1c00-0x7fdd3fff]
  56. [ 0.000000] Zone ranges:
  57. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  58. [ 0.000000] DMA32 empty
  59. [ 0.000000] Normal empty
  60. [ 0.000000] Movable zone start for each node
  61. [ 0.000000] Early memory node ranges
  62. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  63. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  64. [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000
  65. [ 0.000000] psci: probing for conduit method from DT.
  66. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  67. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  68. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  69. [ 0.000000] psci: SMC Calling Convention v1.2
  70. [ 0.000000] percpu: Embedded 20 pages/cpu s41560 r8192 d32168 u81920
  71. [ 0.000000] Detected VIPT I-cache on CPU0
  72. [ 0.000000] CPU features: detected: GIC system register CPU interface
  73. [ 0.000000] CPU features: detected: ARM erratum 845719
  74. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  75. [ 0.000000] Policy zone: DMA
  76. [ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.ifnames=0 pci=pcie_bus_perf
  77. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  78. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  79. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  80. [ 0.000000] Memory: 961892K/1048576K available (15168K kernel code, 3082K rwdata, 8248K rodata, 6208K init, 498K bss, 53916K reserved, 32768K cma-reserved)
  81. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  82. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  83. [ 0.000000] rcu: RCU event tracing is enabled.
  84. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  85. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  86. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  87. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  88. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  89. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  90. [ 0.000000] GICv3: 128 SPIs implemented
  91. [ 0.000000] GICv3: 0 Extended SPIs implemented
  92. [ 0.000000] GICv3: Distributor has no Range Selector support
  93. [ 0.000000] Root IRQ handler: gic_handle_irq
  94. [ 0.000000] GICv3: 16 PPIs implemented
  95. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
  96. [ 0.000000] ITS: No ITS available, not enabling LPIs
  97. [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  98. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
  99. [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
  100. [ 0.009043] Console: colour dummy device 80x25
  101. [ 0.012469] printk: console [tty0] enabled
  102. [ 0.016572] printk: bootconsole [ec_imx6q0] disabled
  103. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  104. [ 0.000000] Linux version 5.15.78-fslc+ga6f23772003a (oe-user@oe-host) (aarch64-fslc-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sun Nov 13 15:09:41 UTC 2022
  105. [ 0.000000] Machine model: Google i.MX8MQ Phanbell
  106. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
  107. [ 0.000000] printk: bootconsole [ec_imx6q0] enabled
  108. [ 0.000000] efi: UEFI not found.
  109. [ 0.000000] NUMA: No NUMA configuration found
  110. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  111. [ 0.000000] NUMA: NODE_DATA [mem 0x7fdd1c00-0x7fdd3fff]
  112. [ 0.000000] Zone ranges:
  113. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  114. [ 0.000000] DMA32 empty
  115. [ 0.000000] Normal empty
  116. [ 0.000000] Movable zone start for each node
  117. [ 0.000000] Early memory node ranges
  118. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  119. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  120. [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000
  121. [ 0.000000] psci: probing for conduit method from DT.
  122. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  123. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  124. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  125. [ 0.000000] psci: SMC Calling Convention v1.2
  126. [ 0.000000] percpu: Embedded 20 pages/cpu s41560 r8192 d32168 u81920
  127. [ 0.000000] Detected VIPT I-cache on CPU0
  128. [ 0.000000] CPU features: detected: GIC system register CPU interface
  129. [ 0.000000] CPU features: detected: ARM erratum 845719
  130. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  131. [ 0.000000] Policy zone: DMA
  132. [ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.ifnames=0 pci=pcie_bus_perf
  133. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  134. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  135. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  136. [ 0.000000] Memory: 961892K/1048576K available (15168K kernel code, 3082K rwdata, 8248K rodata, 6208K init, 498K bss, 53916K reserved, 32768K cma-reserved)
  137. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  138. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  139. [ 0.000000] rcu: RCU event tracing is enabled.
  140. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  141. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  142. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  143. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  144. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  145. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  146. [ 0.000000] GICv3: 128 SPIs implemented
  147. [ 0.000000] GICv3: 0 Extended SPIs implemented
  148. [ 0.000000] GICv3: Distributor has no Range Selector support
  149. [ 0.000000] Root IRQ handler: gic_handle_irq
  150. [ 0.000000] GICv3: 16 PPIs implemented
  151. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
  152. [ 0.000000] ITS: No ITS available, not enabling LPIs
  153. [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  154. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
  155. [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
  156. [ 0.009043] Console: colour dummy device 80x25
  157. [ 0.012469] printk: console [tty0] enabled
  158. [ 0.016572] printk: bootconsole [ec_imx6q0] disabled
  159. [ 0.021623] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
  160. [ 0.021648] pid_max: default: 32768 minimum: 301
  161. [ 0.021720] LSM: Security Framework initializing
  162. [ 0.021833] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  163. [ 0.021856] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  164. [ 0.023506] rcu: Hierarchical SRCU implementation.
  165. [ 0.025733] EFI services will not be available.
  166. [ 0.025952] smp: Bringing up secondary CPUs ...
  167. [ 0.026426] Detected VIPT I-cache on CPU1
  168. [ 0.026461] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
  169. [ 0.026503] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  170. [ 0.027003] Detected VIPT I-cache on CPU2
  171. [ 0.027026] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
  172. [ 0.027050] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  173. [ 0.027510] Detected VIPT I-cache on CPU3
  174. [ 0.027531] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
  175. [ 0.027554] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  176. [ 0.027623] smp: Brought up 1 node, 4 CPUs
  177. [ 0.027700] SMP: Total of 4 processors activated.
  178. [ 0.027712] CPU features: detected: 32-bit EL0 Support
  179. [ 0.027726] CPU features: detected: 32-bit EL1 Support
  180. [ 0.027739] CPU features: detected: CRC32 instructions
  181. [ 0.035829] CPU: All CPU(s) started at EL2
  182. [ 0.035874] alternatives: patching kernel code
  183. [ 0.037096] devtmpfs: initialized
  184. [ 0.042603] KASLR disabled due to lack of seed
  185. [ 0.042768] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  186. [ 0.042800] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  187. [ 0.043889] pinctrl core: initialized pinctrl subsystem
  188. [ 0.044824] DMI not present or invalid.
  189. [ 0.045490] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  190. [ 0.046947] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  191. [ 0.047070] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  192. [ 0.047203] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  193. [ 0.047289] audit: initializing netlink subsys (disabled)
  194. [ 0.047448] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
  195. [ 0.048547] thermal_sys: Registered thermal governor 'step_wise'
  196. [ 0.048553] thermal_sys: Registered thermal governor 'power_allocator'
  197. [ 0.048975] cpuidle: using governor menu
  198. [ 0.049190] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  199. [ 0.049287] ASID allocator initialised with 65536 entries
  200. [ 0.050763] Serial: AMBA PL011 UART driver
  201.  
  202. -----------------------------------
  203. [ 0.058718] imx8mq-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
  204. [ 0.065453] platform 30a90000.csi: Fixing up cyclic dependency with 30a70000.csi
  205.  
  206. --------------------------------------
  207. [ 0.081317] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  208. [ 0.081348] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  209. [ 0.081364] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  210. [ 0.081379] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  211. [ 0.082556] cryptd: max_cpu_qlen set to 1000
  212. [ 0.084761] ACPI: Interpreter disabled.
  213. [ 0.086621] iommu: Default domain type: Translated
  214. [ 0.086637] iommu: DMA domain TLB invalidation policy: strict mode
  215. [ 0.086907] vgaarb: loaded
  216. [ 0.087232] SCSI subsystem initialized
  217. [ 0.087557] usbcore: registered new interface driver usbfs
  218. [ 0.087604] usbcore: registered new interface driver hub
  219. [ 0.087642] usbcore: registered new device driver usb
  220. [ 0.088422] pps_core: LinuxPPS API ver. 1 registered
  221. [ 0.088436] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  222. [ 0.088464] PTP clock support registered
  223. [ 0.088589] EDAC MC: Ver: 3.0.0
  224. [ 0.090088] FPGA manager framework
  225. [ 0.090179] Advanced Linux Sound Architecture Driver Initialized.
  226. [ 0.091062] clocksource: Switched to clocksource arch_sys_counter
  227. [ 0.091267] VFS: Disk quotas dquot_6.6.0
  228. [ 0.091322] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  229. [ 0.091504] pnp: PnP ACPI: disabled
  230. [ 0.097303] NET: Registered PF_INET protocol family
  231. [ 0.097440] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  232. [ 0.098156] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  233. [ 0.098225] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  234. [ 0.098250] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  235. [ 0.098332] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  236. [ 0.098471] TCP: Hash tables configured (established 8192 bind 8192)
  237. [ 0.098564] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  238. [ 0.098605] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  239. [ 0.098736] NET: Registered PF_UNIX/PF_LOCAL protocol family
  240. [ 0.099143] RPC: Registered named UNIX socket transport module.
  241. [ 0.099160] RPC: Registered udp transport module.
  242. [ 0.099172] RPC: Registered tcp transport module.
  243. [ 0.099183] RPC: Registered tcp NFSv4.1 backchannel transport module.
  244. [ 0.099201] PCI: CLS 0 bytes, default 64
  245. [ 0.099820] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  246. [ 0.100209] kvm [1]: IPA Size Limit: 40 bits
  247. [ 0.101628] kvm [1]: vgic-v2@31020000
  248. [ 0.101652] kvm [1]: GIC system register CPU interface enabled
  249. [ 0.101741] kvm [1]: vgic interrupt IRQ9
  250. [ 0.101877] kvm [1]: Hyp mode initialized successfully
  251. [ 0.105396] Initialise system trusted keyrings
  252. [ 0.105539] workingset: timestamp_bits=42 max_order=18 bucket_order=0
  253. [ 0.111901] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  254. [ 0.112488] NFS: Registering the id_resolver key type
  255. [ 0.112528] Key type id_resolver registered
  256. [ 0.112541] Key type id_legacy registered
  257. [ 0.112628] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  258. [ 0.112645] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  259. [ 0.112770] 9p: Installing v9fs 9p2000 file system support
  260. [ 0.156317] Key type asymmetric registered
  261. [ 0.156333] Asymmetric key parser 'x509' registered
  262. [ 0.156398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  263. [ 0.156418] io scheduler mq-deadline registered
  264. [ 0.156431] io scheduler kyber registered
  265. [ 0.168398] EINJ: ACPI disabled.
  266. [ 0.186662] SoC: i.MX8MQ revision 2.1
  267. [ 0.195673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  268. [ 0.198105] SuperH (H)SCI(F) driver initialized
  269. [ 0.198672] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 35, base_baud = 1562500) is a IMX
  270. [ 1.136363] printk: console [ttymxc0] enabled
  271. [ 1.141331] msm_serial: driver initialized
  272. [ 1.152584] loop: module loaded
  273. [ 1.156751] megasas: 07.717.02.00-rc1
  274. [ 1.167021] tun: Universal TUN/TAP device driver, 1.6
  275. [ 1.173017] thunder_xcv, ver 1.0
  276. [ 1.176295] thunder_bgx, ver 1.0
  277. [ 1.179571] nicpf, ver 1.0
  278. [ 1.183779] hclge is initializing
  279. [ 1.187122] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  280. [ 1.194361] hns3: Copyright (c) 2017 Huawei Corporation.
  281. [ 1.199730] e1000: Intel(R) PRO/1000 Network Driver
  282. [ 1.204622] e1000: Copyright (c) 1999-2006 Intel Corporation.
  283. [ 1.210418] e1000e: Intel(R) PRO/1000 Network Driver
  284. [ 1.215395] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  285. [ 1.221361] igb: Intel(R) Gigabit Ethernet Network Driver
  286. [ 1.226780] igb: Copyright (c) 2007-2014 Intel Corporation.
  287. [ 1.232391] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  288. [ 1.238672] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  289. [ 1.244959] sky2: driver version 1.30
  290. [ 1.249803] VFIO - User Level meta-driver version: 0.3
  291. [ 1.257163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  292. [ 1.263716] ehci-pci: EHCI PCI platform driver
  293. [ 1.268204] ehci-platform: EHCI generic platform driver
  294. [ 1.273576] ehci-orion: EHCI orion driver
  295. [ 1.277705] ehci-exynos: EHCI Exynos driver
  296. [ 1.281993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  297. [ 1.288197] ohci-pci: OHCI PCI platform driver
  298. [ 1.292684] ohci-platform: OHCI generic platform driver
  299. [ 1.298042] ohci-exynos: OHCI Exynos driver
  300. [ 1.302877] usbcore: registered new interface driver usb-storage
  301. [ 1.311932] i2c_dev: i2c /dev entries driver
  302. [ 1.323365] sdhci: Secure Digital Host Controller Interface driver
  303. [ 1.329566] sdhci: Copyright(c) Pierre Ossman
  304. [ 1.334765] Synopsys Designware Multimedia Card Interface Driver
  305. [ 1.341922] sdhci-pltfm: SDHCI platform and OF driver helper
  306. [ 1.349581] ledtrig-cpu: registered to indicate activity on CPUs
  307. [ 1.356849] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  308. [ 1.363959] usbcore: registered new interface driver usbhid
  309. [ 1.369554] usbhid: USB HID core driver
  310. [ 1.379462] NET: Registered PF_PACKET protocol family
  311. [ 1.379647] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
  312. [ 1.384668] 9pnet: Installing 9P2000 support
  313. [ 1.395948] Key type dns_resolver registered
  314. [ 1.400531] Loading compiled-in X.509 certificates
  315. [ 1.451416] ldo5: supplied by buck6
  316. [ 1.457051] ldo6: supplied by buck7
  317. [ 1.461580] mmc0: new HS200 MMC card at address 0001
  318.  
  319. --------------------------------------------------------
  320. [ 1.463846] i2c i2c-0: IMX I2C adapter registered
  321. [ 1.467046] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
  322. [ 1.471901] imx-i2c 30a30000.i2c: can't get pinctrl, bus recovery not supported
  323. [ 1.483613] i2c 1-003c: Fixing up cyclic dependency with 30a70000.csi
  324. [ 1.490576] i2c i2c-1: IMX I2C adapter registered
  325.  
  326. -------------------------------------------------------------
  327. [ 1.496460] GPT:partition_entry_array_crc32 values don't match: 0x4db2764f != 0x97897541
  328. [ 1.496856] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator
  329. [ 1.504577] GPT: Use GNU Parted to correct GPT errors.
  330. [ 1.504605] mmcblk0: p1 p2 p3 p4
  331. [ 1.513325] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator
  332. [ 1.518736] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
  333. [ 1.523678] pps pps0: new PPS source ptp0
  334. [ 1.530598] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
  335. [ 1.544444] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (234:0)
  336. [ 1.691920] fec 30be0000.ethernet eth0: registered PHC device 0
  337. [ 1.701802] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  338. [ 1.708365] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  339. [ 1.716147] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002000010010
  340. [ 1.725600] xhci-hcd xhci-hcd.3.auto: irq 51, io mem 0x38200000
  341. [ 1.731674] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  342. [ 1.737184] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  343. [ 1.744868] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  344. [ 1.751954] hub 1-0:1.0: USB hub found
  345. [ 1.755745] hub 1-0:1.0: 1 port detected
  346. [ 1.759977] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  347. [ 1.768498] hub 2-0:1.0: USB hub found
  348. [ 1.772285] hub 2-0:1.0: 1 port detected
  349. [ 1.779606] input: bd718xx-pwrkey as /devices/platform/soc@0/30800000.bus/30a20000.i2c/i2c-0/0-004b/gpio-keys.0.auto/input/input0
  350. [ 1.779952] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
  351. [ 1.792218] ALSA device list:
  352. [ 1.799347] No soundcards found.
  353. [ 1.827786] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
  354. [ 1.835010] Waiting for root device /dev/mmcblk1p2...
  355. [ 1.959076] mmc1: host does not support reading read-only switch, assuming write-enable
  356. [ 1.992279] mmc1: new ultra high speed SDR104 SDHC card at address 1234
  357. [ 1.999389] mmcblk1: mmc1:1234 SA16G 14.6 GiB
  358. [ 2.009508] GPT:Primary header thinks Alt. header is not at the end of the disk.
  359. [ 2.016966] GPT:1925445 != 30703615
  360. [ 2.020471] GPT:Alternate GPT header not at the end of the disk.
  361. [ 2.026492] GPT:1925445 != 30703615
  362. [ 2.029993] GPT: Use GNU Parted to correct GPT errors.
  363. [ 2.035162] mmcblk1: p1 p2
  364. [ 2.499375] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  365. [ 2.509198] VFS: Mounted root (ext4 filesystem) on device 179:98.
  366. [ 2.516055] devtmpfs: mounted
  367. [ 2.520704] Freeing unused kernel memory: 6208K
  368. [ 2.525336] Run /sbin/init as init process
  369. [ 2.703044] systemd[1]: System time before build time, advancing clock.
  370. [ 2.746462] NET: Registered PF_INET6 protocol family
  371. [ 2.752348] Segment Routing with IPv6
  372. [ 2.756061] In-situ OAM (IOAM) with IPv6
  373. [ 2.777246] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
  374. [ 2.809081] systemd[1]: Detected architecture arm64.
  375. [ 2.877499] systemd[1]: Hostname set to <coral-dev>.
  376. [ 2.888118] systemd[1]: Initializing machine ID from random generator.
  377. [ 3.525593] systemd[1]: Queued start job for default target Multi-User System.
  378. [ 3.572082] systemd[1]: Created slice Slice /system/getty.
  379. [ 3.579666] systemd[1]: Created slice Slice /system/modprobe.
  380. [ 3.587240] systemd[1]: Created slice Slice /system/serial-getty.
  381. [ 3.595128] systemd[1]: Created slice User and Session Slice.
  382. [ 3.601310] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  383. [ 3.609618] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  384. [ 3.617679] systemd[1]: Reached target Path Units.
  385. [ 3.622700] systemd[1]: Reached target Remote File Systems.
  386. [ 3.628501] systemd[1]: Reached target Slice Units.
  387. [ 3.633607] systemd[1]: Reached target Swaps.
  388. [ 3.639660] systemd[1]: Listening on RPCbind Server Activation Socket.
  389. [ 3.646411] systemd[1]: Reached target RPC Port Mapper.
  390. [ 3.652197] systemd[1]: Listening on Syslog Socket.
  391. [ 3.657450] systemd[1]: Listening on initctl Compatibility Named Pipe.
  392. [ 3.664781] systemd[1]: Listening on Journal Audit Socket.
  393. [ 3.670747] systemd[1]: Listening on Journal Socket (/dev/log).
  394. [ 3.677240] systemd[1]: Listening on Journal Socket.
  395. [ 3.682975] systemd[1]: Listening on Network Service Netlink Socket.
  396. [ 3.690780] systemd[1]: Listening on udev Control Socket.
  397. [ 3.696669] systemd[1]: Listening on udev Kernel Socket.
  398. [ 3.702511] systemd[1]: Listening on User Database Manager Socket.
  399. [ 3.712317] systemd[1]: Mounting Huge Pages File System...
  400. [ 3.721689] systemd[1]: Mounting POSIX Message Queue File System...
  401. [ 3.731796] systemd[1]: Mounting Kernel Debug File System...
  402. [ 3.738256] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
  403. [ 3.755360] systemd[1]: Mounting Temporary Directory /tmp...
  404. [ 3.765563] systemd[1]: Starting Create List of Static Device Nodes...
  405. [ 3.776732] systemd[1]: Starting Load Kernel Module configfs...
  406. [ 3.786815] systemd[1]: Starting Load Kernel Module drm...
  407. [ 3.796526] systemd[1]: Starting Load Kernel Module fuse...
  408. [ 3.807943] systemd[1]: Starting RPC Bind...
  409. [ 3.812870] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
  410. [ 3.825867] fuse: init (API version 7.34)
  411. [ 3.826048] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  412. [ 3.842883] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  413. [ 3.856404] systemd[1]: Starting Journal Service...
  414. [ 3.863485] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
  415. [ 3.876503] systemd[1]: Starting Generate network units from Kernel command line...
  416. [ 3.888797] systemd[1]: Starting Remount Root and Kernel File Systems...
  417. [ 3.900003] systemd[1]: Starting Apply Kernel Variables...
  418. [ 3.910928] systemd[1]: Starting Coldplug All udev Devices...
  419. [ 3.919603] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none.
  420. [ 3.925272] systemd[1]: Started RPC Bind.
  421. [ 3.934018] systemd[1]: Mounted Huge Pages File System.
  422. [ 3.940080] systemd[1]: Mounted POSIX Message Queue File System.
  423. [ 3.947027] systemd[1]: Mounted Kernel Debug File System.
  424. [ 3.953159] systemd[1]: Mounted Temporary Directory /tmp.
  425. [ 3.960320] systemd[1]: Finished Create List of Static Device Nodes.
  426. [ 3.968034] systemd[1]: [email protected]: Deactivated successfully.
  427. [ 3.976401] systemd[1]: Finished Load Kernel Module configfs.
  428. [ 3.983538] systemd[1]: [email protected]: Deactivated successfully.
  429. [ 3.991992] systemd[1]: Finished Load Kernel Module drm.
  430. [ 3.998621] systemd[1]: [email protected]: Deactivated successfully.
  431. [ 4.006537] systemd[1]: Finished Load Kernel Module fuse.
  432. [ 4.012686] systemd[1]: Started Journal Service.
  433. [ 4.056415] systemd-journald[158]: Received client request to flush runtime journal.
  434. [ 5.650882] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 3 mkt segment 0 supported-hw 0x8 0x1
  435. [ 5.670620] thermal thermal_zone0: binding zone cpu-thermal with cdev cpufreq-cpu0 failed:-22
  436. [ 5.720164] caam 30900000.crypto: Entropy delay = 3200
  437. [ 5.728408] caam 30900000.crypto: Entropy delay = 3600
  438. [ 5.758058] imx-sdma 302c0000.sdma: loaded firmware 4.5
  439. [ 5.781401] imx-sdma 30bd0000.sdma: loaded firmware 4.5
  440. [ 5.806775] caam 30900000.crypto: Instantiated RNG4 SH0
  441. [ 5.874431] caam 30900000.crypto: Instantiated RNG4 SH1
  442. [ 5.879717] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
  443. [ 5.886451] caam 30900000.crypto: job rings = 3, qi = 0
  444. [ 6.516134] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
  445. [ 6.526050] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
  446. [ 6.535084] random: crng init done
  447. [ 6.554576] imx8m-ddrc-devfreq 3d400000.memory-controller: failed to get OPP table
  448. [ 6.586632] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv])
  449. [ 6.594994] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6214
  450. [ 6.596368] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0
  451. [ 6.633684] mc: Linux media interface: v0.10
  452. [ 6.664016] videodev: Linux video capture interface: v2.00
  453. [ 6.712895] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
  454. [ 6.729497] hantro-vpu 38300000.video-codec: registered nxp,imx8mq-vpu-dec as /dev/video0
  455. [ 7.094959] caam_jr 30901000.jr: failed to flush job ring 0
  456. [ 7.100885] caam_jr: probe of 30901000.jr failed with error -5
  457. [ 7.120273] caam algorithms registered in /proc/crypto
  458. [ 7.133061] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
  459. [ 7.140968] caam 30900000.crypto: registering rng-caam
  460. [ 8.403533] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  461. [ 8.406184] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  462. [ 8.495106] ext2 filesystem being mounted at /run/media/boot-mmcblk0p1 supports timestamps until 2038 (0x7fffffff)
  463. [ 8.535436] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  464. [ 8.577580] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  465. [ 8.592122] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  466. [ 8.602988] Bluetooth: Core ver 2.22
  467. [ 8.607911] NET: Registered PF_BLUETOOTH protocol family
  468. [ 8.613266] Bluetooth: HCI device and connection manager initialized
  469. [ 8.619666] Bluetooth: HCI socket layer initialized
  470. [ 8.627847] Bluetooth: L2CAP socket layer initialized
  471. [ 8.633002] Bluetooth: SCO socket layer initialized
  472. [ 8.783104] RTL8211F Gigabit Ethernet 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
  473. [ 12.904011] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  474. [ 12.911814] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  475.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!