armoon

odroid_xu4_exynos_defconfig_4.13

Sep 3rd, 2017
483
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Ubuntu 16.04.3 LTS odroid ttySAC2
  2.  
  3. odroid login: root
  4. Password:
  5. Last login: Mon Sep 4 04:24:10 UTC 2017 on ttySAC2
  6. Welcome to Ubuntu 16.04.3 LTS (GNU/Linux 4.13.0-xu4ml armv7l)
  7.  
  8. * Documentation: https://help.ubuntu.com
  9. * Management: https://landscape.canonical.com
  10. * Support: https://ubuntu.com/advantage
  11. root@odroid:~# dmesg
  12. [ 0.000000] Booting Linux on physical CPU 0x100
  13. [ 0.000000] Linux version 4.13.0-xu4ml (root@odroid) (gcc version 6.3.0 20170519 (Ubuntu/Linaro 6.3.0-18ubuntu2~16.04)) #32 SMP PREEMPT Mon Sep 4 04:09:50 UTC 2017
  14. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  15. [ 0.000000] CPU: div instructions available: patching division code
  16. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  17. [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
  18. [ 0.000000] Memory policy: Data cache writealloc
  19. [ 0.000000] cma: Reserved 96 MiB at 0xb8800000
  20. [ 0.000000] Samsung CPU ID: 0xe5422001
  21. [ 0.000000] On node 0 totalpages: 518656
  22. [ 0.000000] free_area_init_node: node 0, pgdat c0c43780, node_mem_map ef020000
  23. [ 0.000000] Normal zone: 1536 pages used for memmap
  24. [ 0.000000] Normal zone: 0 pages reserved
  25. [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
  26. [ 0.000000] HighMem zone: 322048 pages, LIFO batch:31
  27. [ 0.000000] Running under secure firmware.
  28. [ 0.000000] percpu: Embedded 16 pages/cpu @eef6f000 s35288 r8192 d22056 u65536
  29. [ 0.000000] pcpu-alloc: s35288 r8192 d22056 u65536 alloc=16*4096
  30. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  31. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
  32. [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 HPD=true vout=hdmi usbhid.quirks=0x0eef:0x0005:0x0004 smsc95xx.macaddr=00:1e:06:61:7a:39 false governor=performance xhci_hcd.dyndbg=+p
  33. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  34. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  35. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  36. [ 0.000000] Memory: 1943124K/2074624K available (7168K kernel code, 329K rwdata, 2500K rodata, 1024K init, 324K bss, 33196K reserved, 98304K cma-reserved, 1189888K highmem)
  37. [ 0.000000] Virtual kernel memory layout:
  38. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  39. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  40. vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  41. lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  42. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  43. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  44. .text : 0xc0008000 - 0xc0800000 (8160 kB)
  45. .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
  46. .data : 0xc0c00000 - 0xc0c527d0 ( 330 kB)
  47. .bss : 0xc0c5a30c - 0xc0cab684 ( 325 kB)
  48. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  49. [ 0.000000] Preemptible hierarchical RCU implementation.
  50. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  51. [ 0.000000] GIC: Using split EOI/Deactivate mode
  52. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  53. [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  54. [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  55. [ 0.001333] Console: colour dummy device 80x30
  56. [ 0.002043] console [tty1] enabled
  57. [ 0.002088] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  58. [ 0.002145] pid_max: default: 32768 minimum: 301
  59. [ 0.002301] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  60. [ 0.002347] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  61. [ 0.003017] CPU: Testing write buffer coherency: ok
  62. [ 0.003763] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  63. [ 0.040045] Setting up static identity map for 0x40100000 - 0x40100060
  64. [ 0.040643] ARM CCI driver probed
  65. [ 0.040894] Exynos MCPM support installed
  66. [ 0.059984] Hierarchical SRCU implementation.
  67. [ 0.099983] smp: Bringing up secondary CPUs ...
  68. [ 0.170334] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  69. [ 0.240302] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  70. [ 0.310301] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  71. [ 0.380289] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  72. [ 0.450288] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  73. [ 0.520291] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  74. [ 0.590274] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  75. [ 0.590410] smp: Brought up 1 node, 8 CPUs
  76. [ 0.590613] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  77. [ 0.590646] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
  78. [ 0.590689] CPU: This may indicate a broken bootloader or firmware.
  79. [ 0.591964] devtmpfs: initialized
  80. [ 0.614737] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
  81. [ 0.615212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  82. [ 0.615278] futex hash table entries: 2048 (order: 5, 131072 bytes)
  83. [ 0.619859] pinctrl core: initialized pinctrl subsystem
  84. [ 0.622422] random: get_random_u32 called from bucket_table_alloc+0x10c/0x25c with crng_init=0
  85. [ 0.622631] NET: Registered protocol family 16
  86. [ 0.624780] DMA: preallocated 256 KiB pool for atomic coherent allocations
  87. [ 0.627917] cpuidle: using governor menu
  88. [ 0.641219] gpio gpiochip0: (gpy7): added GPIO chardev (254:0)
  89. [ 0.641233] gpiochip_setup_dev: registered GPIOs 0 to 7 on device: gpiochip0 (gpy7)
  90. [ 0.641459] gpio gpiochip1: (gpx0): added GPIO chardev (254:1)
  91. [ 0.641471] gpiochip_setup_dev: registered GPIOs 8 to 15 on device: gpiochip1 (gpx0)
  92. [ 0.641674] gpio gpiochip2: (gpx1): added GPIO chardev (254:2)
  93. [ 0.641685] gpiochip_setup_dev: registered GPIOs 16 to 23 on device: gpiochip2 (gpx1)
  94. [ 0.641895] gpio gpiochip3: (gpx2): added GPIO chardev (254:3)
  95. [ 0.641905] gpiochip_setup_dev: registered GPIOs 24 to 31 on device: gpiochip3 (gpx2)
  96. [ 0.642113] gpio gpiochip4: (gpx3): added GPIO chardev (254:4)
  97. [ 0.642124] gpiochip_setup_dev: registered GPIOs 32 to 39 on device: gpiochip4 (gpx3)
  98. [ 0.645368] gpio gpiochip5: (gpc0): added GPIO chardev (254:5)
  99. [ 0.645381] gpiochip_setup_dev: registered GPIOs 40 to 47 on device: gpiochip5 (gpc0)
  100. [ 0.645596] gpio gpiochip6: (gpc1): added GPIO chardev (254:6)
  101. [ 0.645607] gpiochip_setup_dev: registered GPIOs 48 to 55 on device: gpiochip6 (gpc1)
  102. [ 0.645825] gpio gpiochip7: (gpc2): added GPIO chardev (254:7)
  103. [ 0.645836] gpiochip_setup_dev: registered GPIOs 56 to 62 on device: gpiochip7 (gpc2)
  104. [ 0.646055] gpio gpiochip8: (gpc3): added GPIO chardev (254:8)
  105. [ 0.646066] gpiochip_setup_dev: registered GPIOs 63 to 66 on device: gpiochip8 (gpc3)
  106. [ 0.646282] gpio gpiochip9: (gpc4): added GPIO chardev (254:9)
  107. [ 0.646293] gpiochip_setup_dev: registered GPIOs 67 to 68 on device: gpiochip9 (gpc4)
  108. [ 0.646512] gpio gpiochip10: (gpd1): added GPIO chardev (254:10)
  109. [ 0.646523] gpiochip_setup_dev: registered GPIOs 69 to 76 on device: gpiochip10 (gpd1)
  110. [ 0.646732] gpio gpiochip11: (gpy0): added GPIO chardev (254:11)
  111. [ 0.646742] gpiochip_setup_dev: registered GPIOs 77 to 82 on device: gpiochip11 (gpy0)
  112. [ 0.646966] gpio gpiochip12: (gpy1): added GPIO chardev (254:12)
  113. [ 0.646977] gpiochip_setup_dev: registered GPIOs 83 to 86 on device: gpiochip12 (gpy1)
  114. [ 0.647197] gpio gpiochip13: (gpy2): added GPIO chardev (254:13)
  115. [ 0.647208] gpiochip_setup_dev: registered GPIOs 87 to 92 on device: gpiochip13 (gpy2)
  116. [ 0.647418] gpio gpiochip14: (gpy3): added GPIO chardev (254:14)
  117. [ 0.647429] gpiochip_setup_dev: registered GPIOs 93 to 100 on device: gpiochip14 (gpy3)
  118. [ 0.647639] gpio gpiochip15: (gpy4): added GPIO chardev (254:15)
  119. [ 0.647649] gpiochip_setup_dev: registered GPIOs 101 to 108 on device: gpiochip15 (gpy4)
  120. [ 0.647876] gpio gpiochip16: (gpy5): added GPIO chardev (254:16)
  121. [ 0.647887] gpiochip_setup_dev: registered GPIOs 109 to 116 on device: gpiochip16 (gpy5)
  122. [ 0.648100] gpio gpiochip17: (gpy6): added GPIO chardev (254:17)
  123. [ 0.648111] gpiochip_setup_dev: registered GPIOs 117 to 124 on device: gpiochip17 (gpy6)
  124. [ 0.650069] gpio gpiochip18: (gpe0): added GPIO chardev (254:18)
  125. [ 0.650081] gpiochip_setup_dev: registered GPIOs 125 to 132 on device: gpiochip18 (gpe0)
  126. [ 0.650312] gpio gpiochip19: (gpe1): added GPIO chardev (254:19)
  127. [ 0.650324] gpiochip_setup_dev: registered GPIOs 133 to 134 on device: gpiochip19 (gpe1)
  128. [ 0.650546] gpio gpiochip20: (gpf0): added GPIO chardev (254:20)
  129. [ 0.650557] gpiochip_setup_dev: registered GPIOs 135 to 140 on device: gpiochip20 (gpf0)
  130. [ 0.650785] gpio gpiochip21: (gpf1): added GPIO chardev (254:21)
  131. [ 0.650797] gpiochip_setup_dev: registered GPIOs 141 to 148 on device: gpiochip21 (gpf1)
  132. [ 0.651015] gpio gpiochip22: (gpg0): added GPIO chardev (254:22)
  133. [ 0.651025] gpiochip_setup_dev: registered GPIOs 149 to 156 on device: gpiochip22 (gpg0)
  134. [ 0.651253] gpio gpiochip23: (gpg1): added GPIO chardev (254:23)
  135. [ 0.651263] gpiochip_setup_dev: registered GPIOs 157 to 164 on device: gpiochip23 (gpg1)
  136. [ 0.651493] gpio gpiochip24: (gpg2): added GPIO chardev (254:24)
  137. [ 0.651503] gpiochip_setup_dev: registered GPIOs 165 to 166 on device: gpiochip24 (gpg2)
  138. [ 0.651718] gpio gpiochip25: (gpj4): added GPIO chardev (254:25)
  139. [ 0.651729] gpiochip_setup_dev: registered GPIOs 167 to 170 on device: gpiochip25 (gpj4)
  140. [ 0.653748] gpio gpiochip26: (gpa0): added GPIO chardev (254:26)
  141. [ 0.653761] gpiochip_setup_dev: registered GPIOs 171 to 178 on device: gpiochip26 (gpa0)
  142. [ 0.653955] gpio gpiochip27: (gpa1): added GPIO chardev (254:27)
  143. [ 0.653966] gpiochip_setup_dev: registered GPIOs 179 to 184 on device: gpiochip27 (gpa1)
  144. [ 0.654161] gpio gpiochip28: (gpa2): added GPIO chardev (254:28)
  145. [ 0.654171] gpiochip_setup_dev: registered GPIOs 185 to 192 on device: gpiochip28 (gpa2)
  146. [ 0.654360] gpio gpiochip29: (gpb0): added GPIO chardev (254:29)
  147. [ 0.654371] gpiochip_setup_dev: registered GPIOs 193 to 197 on device: gpiochip29 (gpb0)
  148. [ 0.654560] gpio gpiochip30: (gpb1): added GPIO chardev (254:30)
  149. [ 0.654570] gpiochip_setup_dev: registered GPIOs 198 to 202 on device: gpiochip30 (gpb1)
  150. [ 0.654805] gpio gpiochip31: (gpb2): added GPIO chardev (254:31)
  151. [ 0.654816] gpiochip_setup_dev: registered GPIOs 203 to 206 on device: gpiochip31 (gpb2)
  152. [ 0.655008] gpio gpiochip32: (gpb3): added GPIO chardev (254:32)
  153. [ 0.655018] gpiochip_setup_dev: registered GPIOs 207 to 214 on device: gpiochip32 (gpb3)
  154. [ 0.655207] gpio gpiochip33: (gpb4): added GPIO chardev (254:33)
  155. [ 0.655218] gpiochip_setup_dev: registered GPIOs 215 to 216 on device: gpiochip33 (gpb4)
  156. [ 0.655425] gpio gpiochip34: (gph0): added GPIO chardev (254:34)
  157. [ 0.655435] gpiochip_setup_dev: registered GPIOs 217 to 224 on device: gpiochip34 (gph0)
  158. [ 0.657018] gpio gpiochip35: (gpz): added GPIO chardev (254:35)
  159. [ 0.657030] gpiochip_setup_dev: registered GPIOs 225 to 231 on device: gpiochip35 (gpz)
  160. [ 0.662006] EXYNOS5420 PMU initialized
  161. [ 0.691235] SCSI subsystem initialized
  162. [ 0.691570] usbcore: registered new interface driver usbfs
  163. [ 0.691669] usbcore: registered new interface driver hub
  164. [ 0.691867] usbcore: registered new device driver usb
  165. [ 0.692688] s3c-i2c 12c80000.i2c: slave address 0x00
  166. [ 0.692733] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
  167. [ 0.693334] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
  168. [ 0.694624] Advanced Linux Sound Architecture Driver Initialized.
  169. [ 0.696492] clocksource: Switched to clocksource mct-frc
  170. [ 0.712441] NET: Registered protocol family 2
  171. [ 0.713265] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  172. [ 0.713423] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  173. [ 0.713818] TCP: Hash tables configured (established 8192 bind 8192)
  174. [ 0.714076] UDP hash table entries: 512 (order: 2, 24576 bytes)
  175. [ 0.714179] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  176. [ 0.714492] NET: Registered protocol family 1
  177. [ 0.715187] RPC: Registered named UNIX socket transport module.
  178. [ 0.715226] RPC: Registered udp transport module.
  179. [ 0.715254] RPC: Registered tcp transport module.
  180. [ 0.715283] RPC: Registered tcp NFSv4.1 backchannel transport module.
  181. [ 0.715611] Trying to unpack rootfs image as initramfs...
  182. [ 0.958122] Freeing initrd memory: 3428K
  183. [ 0.960668] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  184. [ 0.973242] NFS: Registering the id_resolver key type
  185. [ 0.973313] Key type id_resolver registered
  186. [ 0.973344] Key type id_legacy registered
  187. [ 0.973413] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  188. [ 0.974780] random: fast init done
  189. [ 0.974828] bounce: pool size: 64 pages
  190. [ 0.974925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  191. [ 0.974973] io scheduler noop registered
  192. [ 0.975002] io scheduler deadline registered
  193. [ 0.975058] io scheduler cfq registered (default)
  194. [ 0.975089] io scheduler mq-deadline registered
  195. [ 0.975118] io scheduler kyber registered
  196. [ 0.977782] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
  197. [ 0.979105] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
  198. [ 0.979267] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
  199. [ 0.979796] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
  200. [ 0.979912] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
  201. [ 0.990954] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  202. [ 0.991007] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  203. [ 0.995434] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  204. [ 0.995480] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  205. [ 0.997117] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  206. [ 0.997162] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  207. [ 1.084831] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  208. [ 1.087901] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
  209. [ 1.088442] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
  210. [ 1.088955] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
  211. [ 1.829756] console [ttySAC2] enabled
  212. [ 1.833904] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
  213. [ 1.847193] exynos-hdmi 14530000.hdmi: GPIO lookup for consumer hpd
  214. [ 1.847205] exynos-hdmi 14530000.hdmi: using device tree for GPIO lookup
  215. [ 1.847233] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@14530000[0]' - status (0)
  216. [ 1.847507] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
  217. [ 1.872973] brd: module loaded
  218. [ 1.888835] loop: module loaded
  219. [ 1.892514] mdio_bus fixed-0: GPIO lookup for consumer reset
  220. [ 1.892525] mdio_bus fixed-0: using lookup tables for GPIO lookup
  221. [ 1.892537] mdio_bus fixed-0: lookup for GPIO reset failed
  222. [ 1.892568] libphy: Fixed MDIO Bus: probed
  223. [ 1.895575] usbcore: registered new interface driver r8152
  224. [ 1.900819] usbcore: registered new interface driver asix
  225. [ 1.906103] usbcore: registered new interface driver ax88179_178a
  226. [ 1.912267] usbcore: registered new interface driver cdc_ether
  227. [ 1.918029] usbcore: registered new interface driver smsc75xx
  228. [ 1.923703] usbcore: registered new interface driver smsc95xx
  229. [ 1.929470] usbcore: registered new interface driver net1080
  230. [ 1.935033] usbcore: registered new interface driver cdc_subset
  231. [ 1.940968] usbcore: registered new interface driver zaurus
  232. [ 1.946538] usbcore: registered new interface driver cdc_ncm
  233. [ 1.954212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  234. [ 1.959347] ehci-exynos: EHCI EXYNOS driver
  235. [ 1.963579] of_get_named_gpiod_flags: can't parse 'samsung,vbus-gpio' property of node '/soc/usb@12110000[0]'
  236. [ 1.963844] exynos-ehci 12110000.usb: EHCI Host Controller
  237. [ 1.968971] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  238. [ 1.976956] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
  239. [ 2.006543] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  240. [ 2.011430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  241. [ 2.017888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  242. [ 2.025046] usb usb1: Product: EHCI Host Controller
  243. [ 2.029920] usb usb1: Manufacturer: Linux 4.13.0-xu4ml ehci_hcd
  244. [ 2.035779] usb usb1: SerialNumber: 12110000.usb
  245. [ 2.041337] hub 1-0:1.0: USB hub found
  246. [ 2.044153] hub 1-0:1.0: 3 ports detected
  247. [ 2.049384] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  248. [ 2.054254] ohci-exynos: OHCI EXYNOS driver
  249. [ 2.058701] exynos-ohci 12120000.usb: USB Host Controller
  250. [ 2.063794] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  251. [ 2.071619] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
  252. [ 2.150835] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  253. [ 2.156163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  254. [ 2.164456] usb usb2: Product: USB Host Controller
  255. [ 2.168156] usb usb2: Manufacturer: Linux 4.13.0-xu4ml ohci_hcd
  256. [ 2.174010] usb usb2: SerialNumber: 12120000.usb
  257. [ 2.179561] hub 2-0:1.0: USB hub found
  258. [ 2.182367] hub 2-0:1.0: 3 ports detected
  259. [ 2.188410] usbcore: registered new interface driver usb-storage
  260. [ 2.193429] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
  261. [ 2.204294] i2c /dev entries driver
  262. [ 2.222467] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
  263. [ 2.236262] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
  264. [ 2.245925] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
  265. [ 2.259721] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
  266. [ 2.320229] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
  267. [ 2.332520] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
  268. [ 2.338626] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
  269. [ 2.351654] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
  270. [ 2.359683] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
  271. [ 2.376396] pwrseq_emmc pwrseq: GPIO lookup for consumer reset
  272. [ 2.376406] pwrseq_emmc pwrseq: using device tree for GPIO lookup
  273. [ 2.376429] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/pwrseq[0]' - status (0)
  274. [ 2.376573] sdhci: Secure Digital Host Controller Interface driver
  275. [ 2.381293] sdhci: Copyright(c) Pierre Ossman
  276. [ 2.385886] Synopsys Designware Multimedia Card Interface Driver
  277. [ 2.392454] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
  278. [ 2.398558] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
  279. [ 2.404862] dwmmc_exynos 12200000.mmc: Version ID is 250a
  280. [ 2.410309] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64 bit host data width,64 deep fifo
  281. [ 2.419700] dwmmc_exynos 12200000.mmc: GPIO lookup for consumer cd
  282. [ 2.419708] dwmmc_exynos 12200000.mmc: using device tree for GPIO lookup
  283. [ 2.419717] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@12200000[0]'
  284. [ 2.419725] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@12200000[0]'
  285. [ 2.419731] dwmmc_exynos 12200000.mmc: using lookup tables for GPIO lookup
  286. [ 2.419738] dwmmc_exynos 12200000.mmc: lookup for GPIO cd failed
  287. [ 2.419747] dwmmc_exynos 12200000.mmc: GPIO lookup for consumer wp
  288. [ 2.419753] dwmmc_exynos 12200000.mmc: using device tree for GPIO lookup
  289. [ 2.419760] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12200000[0]'
  290. [ 2.419767] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12200000[0]'
  291. [ 2.419773] dwmmc_exynos 12200000.mmc: using lookup tables for GPIO lookup
  292. [ 2.419780] dwmmc_exynos 12200000.mmc: lookup for GPIO wp failed
  293. [ 2.419861] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
  294. [ 2.456983] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  295. [ 2.487127] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
  296. [ 2.492655] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
  297. [ 2.499005] dwmmc_exynos 12220000.mmc: Version ID is 250a
  298. [ 2.504400] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64 bit host data width,64 deep fifo
  299. [ 2.514818] dwmmc_exynos 12220000.mmc: GPIO lookup for consumer cd
  300. [ 2.514825] dwmmc_exynos 12220000.mmc: using device tree for GPIO lookup
  301. [ 2.514835] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@12220000[0]'
  302. [ 2.514843] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@12220000[0]'
  303. [ 2.514849] dwmmc_exynos 12220000.mmc: using lookup tables for GPIO lookup
  304. [ 2.514856] dwmmc_exynos 12220000.mmc: lookup for GPIO cd failed
  305. [ 2.514864] dwmmc_exynos 12220000.mmc: GPIO lookup for consumer wp
  306. [ 2.514870] dwmmc_exynos 12220000.mmc: using device tree for GPIO lookup
  307. [ 2.514877] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12220000[0]'
  308. [ 2.514884] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12220000[0]'
  309. [ 2.514890] dwmmc_exynos 12220000.mmc: using lookup tables for GPIO lookup
  310. [ 2.514897] dwmmc_exynos 12220000.mmc: lookup for GPIO wp failed
  311. [ 2.548115] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  312. [ 2.583041] s5p-secss 10830000.sss: s5p-sss driver registered
  313. [ 2.588701] usbcore: registered new interface driver usbhid
  314. [ 2.592916] usbhid: USB HID core driver
  315. [ 2.616624] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
  316. [ 2.622069] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
  317. [ 2.628769] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
  318. [ 2.635234] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
  319. [ 2.649587] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  320. [ 2.657758] NET: Registered protocol family 10
  321. [ 2.659649] Segment Routing with IPv6
  322. [ 2.659739] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  323. [ 2.660768] NET: Registered protocol family 17
  324. [ 2.660798] NET: Registered protocol family 15
  325. [ 2.660906] Key type dns_resolver registered
  326. [ 2.662230] Registering SWP/SWPB emulation handler
  327. [ 2.690023] mmc1: new high speed SDHC card at address 0007
  328. [ 2.696266] mmcblk1: mmc1:0007 SL32G 29.0 GiB
  329. [ 2.699016] exynos-hdmi 14530000.hdmi: GPIO lookup for consumer hpd
  330. [ 2.699026] exynos-hdmi 14530000.hdmi: using device tree for GPIO lookup
  331. [ 2.699066] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@14530000[0]' - status (0)
  332. [ 2.701294] OF: graph: no port node found in /soc/hdmi@14530000
  333. [ 2.702198] mmcblk1: p1 p2
  334. [ 2.710991] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
  335. [ 2.717654] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
  336. [ 2.724769] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
  337. [ 2.732106] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  338. [ 2.738617] [drm] No driver support for vblank timestamp query.
  339. [ 2.745624] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
  340. [ 2.756951] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  341. [ 2.761021] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  342. [ 2.768673] xhci-hcd xhci-hcd.2.auto: xHCI capability registers at f0a48000:
  343. [ 2.768684] xhci-hcd xhci-hcd.2.auto: CAPLENGTH AND HCIVERSION 0x1000020:
  344. [ 2.768691] xhci-hcd xhci-hcd.2.auto: CAPLENGTH: 0x20
  345. [ 2.768699] xhci-hcd xhci-hcd.2.auto: HCIVERSION: 0x100
  346. [ 2.768707] xhci-hcd xhci-hcd.2.auto: HCSPARAMS 1: 0x2000140
  347. [ 2.768716] xhci-hcd xhci-hcd.2.auto: Max device slots: 64
  348. [ 2.768723] xhci-hcd xhci-hcd.2.auto: Max interrupters: 1
  349. [ 2.768731] xhci-hcd xhci-hcd.2.auto: Max ports: 2
  350. [ 2.768740] xhci-hcd xhci-hcd.2.auto: HCSPARAMS 2: 0xc0000f1
  351. [ 2.768748] xhci-hcd xhci-hcd.2.auto: Isoc scheduling threshold: 1
  352. [ 2.768756] xhci-hcd xhci-hcd.2.auto: Maximum allowed segments in event ring: 15
  353. [ 2.768764] xhci-hcd xhci-hcd.2.auto: HCSPARAMS 3 0x7ff000a:
  354. [ 2.768773] xhci-hcd xhci-hcd.2.auto: Worst case U1 device exit latency: 10
  355. [ 2.768781] xhci-hcd xhci-hcd.2.auto: Worst case U2 device exit latency: 2047
  356. [ 2.768789] xhci-hcd xhci-hcd.2.auto: HCC PARAMS 0x220f04c:
  357. [ 2.768797] xhci-hcd xhci-hcd.2.auto: HC generates 32 bit addresses
  358. [ 2.768805] xhci-hcd xhci-hcd.2.auto: HC hasn't Contiguous Frame ID Capability
  359. [ 2.768813] xhci-hcd xhci-hcd.2.auto: HC can't generate Stopped - Short Package event
  360. [ 2.768820] xhci-hcd xhci-hcd.2.auto: FIXME: more HCCPARAMS debugging
  361. [ 2.768829] xhci-hcd xhci-hcd.2.auto: RTSOFF 0x440:
  362. [ 2.768838] xhci-hcd xhci-hcd.2.auto: xHCI operational registers at f0a48020:
  363. [ 2.768847] xhci-hcd xhci-hcd.2.auto: USBCMD 0x0:
  364. [ 2.768854] xhci-hcd xhci-hcd.2.auto: HC is being stopped
  365. [ 2.768862] xhci-hcd xhci-hcd.2.auto: HC has finished hard reset
  366. [ 2.768870] xhci-hcd xhci-hcd.2.auto: Event Interrupts disabled
  367. [ 2.768878] xhci-hcd xhci-hcd.2.auto: Host System Error Interrupts disabled
  368. [ 2.768886] xhci-hcd xhci-hcd.2.auto: HC has finished light reset
  369. [ 2.768894] xhci-hcd xhci-hcd.2.auto: USBSTS 0x11:
  370. [ 2.768902] xhci-hcd xhci-hcd.2.auto: Event ring is empty
  371. [ 2.768909] xhci-hcd xhci-hcd.2.auto: No Host System Error
  372. [ 2.768916] xhci-hcd xhci-hcd.2.auto: HC is halted
  373. [ 2.768926] xhci-hcd xhci-hcd.2.auto: f0a48420 port status reg = 0x400206e1
  374. [ 2.768935] xhci-hcd xhci-hcd.2.auto: f0a48424 port power reg = 0x0
  375. [ 2.768943] xhci-hcd xhci-hcd.2.auto: f0a48428 port link reg = 0x0
  376. [ 2.768952] xhci-hcd xhci-hcd.2.auto: f0a4842c port reserved reg = 0x0
  377. [ 2.768961] xhci-hcd xhci-hcd.2.auto: f0a48430 port status reg = 0x40100088
  378. [ 2.768970] xhci-hcd xhci-hcd.2.auto: f0a48434 port power reg = 0x0
  379. [ 2.768978] xhci-hcd xhci-hcd.2.auto: f0a48438 port link reg = 0x0
  380. [ 2.768987] xhci-hcd xhci-hcd.2.auto: f0a4843c port reserved reg = 0x0
  381. [ 2.768997] xhci-hcd xhci-hcd.2.auto: // Halt the HC
  382. [ 2.769008] xhci-hcd xhci-hcd.2.auto: Resetting HCD
  383. [ 2.769017] xhci-hcd xhci-hcd.2.auto: // Reset the HC
  384. [ 2.769060] xhci-hcd xhci-hcd.2.auto: Wait for controller to be ready for doorbell rings
  385. [ 2.769069] xhci-hcd xhci-hcd.2.auto: Reset complete
  386. [ 2.769079] xhci-hcd xhci-hcd.2.auto: Enabling 32-bit DMA addresses.
  387. [ 2.769087] xhci-hcd xhci-hcd.2.auto: Calling HCD init
  388. [ 2.769095] xhci-hcd xhci-hcd.2.auto: xhci_init
  389. [ 2.769103] xhci-hcd xhci-hcd.2.auto: xHCI doesn't need link TRB QUIRK
  390. [ 2.769113] xhci-hcd xhci-hcd.2.auto: Supported page size register = 0x1
  391. [ 2.769122] xhci-hcd xhci-hcd.2.auto: Supported page size of 4K
  392. [ 2.769130] xhci-hcd xhci-hcd.2.auto: HCD page size set to 4K
  393. [ 2.769139] xhci-hcd xhci-hcd.2.auto: // xHC can handle at most 64 device slots.
  394. [ 2.769147] xhci-hcd xhci-hcd.2.auto: // Setting Max device slots reg = 0x40.
  395. [ 2.769245] xhci-hcd xhci-hcd.2.auto: // Device context base array address = 0xb884a000 (DMA), f0a29000 (virt)
  396. [ 2.769328] xhci-hcd xhci-hcd.2.auto: Allocated command ring at eea50080
  397. [ 2.769336] xhci-hcd xhci-hcd.2.auto: First segment DMA is 0xb884b000
  398. [ 2.769346] xhci-hcd xhci-hcd.2.auto: // Setting command ring address to 0x00000000b884b001
  399. [ 2.769356] xhci-hcd xhci-hcd.2.auto: // xHC command ring deq ptr low bits + flags = @00000000
  400. [ 2.769364] xhci-hcd xhci-hcd.2.auto: // xHC command ring deq ptr high bits = @00000000
  401. [ 2.769423] xhci-hcd xhci-hcd.2.auto: // Doorbell array is located at offset 0x480 from cap regs base addr
  402. [ 2.769433] xhci-hcd xhci-hcd.2.auto: // xHCI capability registers at f0a48000:
  403. [ 2.769443] xhci-hcd xhci-hcd.2.auto: // @f0a48000 = 0x1000020 (CAPLENGTH AND HCIVERSION)
  404. [ 2.769450] xhci-hcd xhci-hcd.2.auto: // CAPLENGTH: 0x20
  405. [ 2.769458] xhci-hcd xhci-hcd.2.auto: // HCIVERSION: 0x100
  406. [ 2.769466] xhci-hcd xhci-hcd.2.auto: // xHCI operational registers at f0a48020:
  407. [ 2.769475] xhci-hcd xhci-hcd.2.auto: // @f0a48018 = 0x440 RTSOFF
  408. [ 2.769483] xhci-hcd xhci-hcd.2.auto: // xHCI runtime registers at f0a48440:
  409. [ 2.769491] xhci-hcd xhci-hcd.2.auto: // @f0a48014 = 0x480 DBOFF
  410. [ 2.769499] xhci-hcd xhci-hcd.2.auto: // Doorbell array at f0a48480:
  411. [ 2.769508] xhci-hcd xhci-hcd.2.auto: xHCI runtime registers at f0a48440:
  412. [ 2.769517] xhci-hcd xhci-hcd.2.auto: f0a48440: Microframe index = 0x0
  413. [ 2.769528] xhci-hcd xhci-hcd.2.auto: // Allocating event ring
  414. [ 2.769589] xhci-hcd xhci-hcd.2.auto: TRB math tests passed.
  415. [ 2.769639] xhci-hcd xhci-hcd.2.auto: // Allocated event ring segment table at 0xb884e000
  416. [ 2.769649] xhci-hcd xhci-hcd.2.auto: Set ERST to 0; private num segs = 1, virt addr = f0a43000, dma addr = 0xb884e000
  417. [ 2.769659] xhci-hcd xhci-hcd.2.auto: // Write ERST size = 1 to ir_set 0 (some bits preserved)
  418. [ 2.769667] xhci-hcd xhci-hcd.2.auto: // Set ERST entries to point to event ring.
  419. [ 2.769675] xhci-hcd xhci-hcd.2.auto: // Set ERST base address for ir_set 0 = 0xb884e000
  420. [ 2.769686] xhci-hcd xhci-hcd.2.auto: // Write event ring dequeue pointer, preserving EHB bit
  421. [ 2.769694] xhci-hcd xhci-hcd.2.auto: Wrote ERST address to ir_set 0.
  422. [ 2.769705] xhci-hcd xhci-hcd.2.auto: Allocating 1 scratchpad buffers
  423. [ 2.769816] xhci-hcd xhci-hcd.2.auto: Ext Cap f0a48890, port offset = 1, count = 1, revision = 0x2
  424. [ 2.769825] xhci-hcd xhci-hcd.2.auto: xHCI 1.0: support USB2 software lpm
  425. [ 2.769834] xhci-hcd xhci-hcd.2.auto: xHCI 1.0: support USB2 hardware lpm
  426. [ 2.769846] xhci-hcd xhci-hcd.2.auto: Ext Cap f0a488a0, port offset = 2, count = 1, revision = 0x3
  427. [ 2.769856] xhci-hcd xhci-hcd.2.auto: Found 1 USB 2.0 ports and 1 USB 3.0 ports.
  428. [ 2.769866] xhci-hcd xhci-hcd.2.auto: USB 2.0 port at index 0, addr = f0a48420
  429. [ 2.769875] xhci-hcd xhci-hcd.2.auto: USB 3.0 port at index 1, addr = f0a48430
  430. [ 2.769883] xhci-hcd xhci-hcd.2.auto: Finished xhci_init
  431. [ 2.769891] xhci-hcd xhci-hcd.2.auto: Called HCD init
  432. [ 2.769899] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010
  433. [ 2.777389] xhci-hcd xhci-hcd.2.auto: irq 136, io mem 0x12000000
  434. [ 2.783246] xhci-hcd xhci-hcd.2.auto: xhci_run
  435. [ 2.783256] xhci-hcd xhci-hcd.2.auto: // xHC command ring deq ptr low bits + flags = @00000000
  436. [ 2.783264] xhci-hcd xhci-hcd.2.auto: // xHC command ring deq ptr high bits = @00000000
  437. [ 2.783272] xhci-hcd xhci-hcd.2.auto: ERST memory map follows:
  438. [ 2.783282] xhci-hcd xhci-hcd.2.auto: @00000000b884e000 b884d000 00000000 00000100 00000000
  439. [ 2.783291] xhci-hcd xhci-hcd.2.auto: ERST deq = 64'hb884d000
  440. [ 2.783299] xhci-hcd xhci-hcd.2.auto: // Set the interrupt modulation register
  441. [ 2.783309] xhci-hcd xhci-hcd.2.auto: // Enable interrupts, cmd = 0x4.
  442. [ 2.783318] xhci-hcd xhci-hcd.2.auto: // Enabling event ring interrupter f0a48460 by writing 0x2 to irq_pending
  443. [ 2.783328] xhci-hcd xhci-hcd.2.auto: f0a48460: ir_set[0]
  444. [ 2.783336] xhci-hcd xhci-hcd.2.auto: f0a48460: ir_set.pending = 0x2
  445. [ 2.783345] xhci-hcd xhci-hcd.2.auto: f0a48464: ir_set.control = 0xa0
  446. [ 2.783354] xhci-hcd xhci-hcd.2.auto: f0a48468: ir_set.erst_size = 0x1
  447. [ 2.783364] xhci-hcd xhci-hcd.2.auto: f0a48470: ir_set.erst_base = @b884e000
  448. [ 2.783373] xhci-hcd xhci-hcd.2.auto: f0a48478: ir_set.erst_dequeue = @b884d000
  449. [ 2.783381] xhci-hcd xhci-hcd.2.auto: Finished xhci_run for USB2 roothub
  450. [ 2.783648] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  451. [ 2.790048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  452. [ 2.797238] usb usb3: Product: xHCI Host Controller
  453. [ 2.802045] usb usb3: Manufacturer: Linux 4.13.0-xu4ml xhci-hcd
  454. [ 2.807964] usb usb3: SerialNumber: xhci-hcd.2.auto
  455. [ 2.813662] xHCI xhci_add_endpoint called for root hub
  456. [ 2.813673] xHCI xhci_check_bandwidth called for root hub
  457. [ 2.813688] xhci-hcd xhci-hcd.2.auto: Endpoint 0x81 ep reset callback called
  458. [ 2.813931] hub 3-0:1.0: USB hub found
  459. [ 2.816604] hub 3-0:1.0: 1 port detected
  460. [ 2.820615] xhci-hcd xhci-hcd.2.auto: set port power, actual port 0 status = 0x400206e1
  461. [ 2.820930] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  462. [ 2.825890] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
  463. [ 2.833563] xhci-hcd xhci-hcd.2.auto: // Turn on HC, cmd = 0x5.
  464. [ 2.833573] xhci-hcd xhci-hcd.2.auto: Finished xhci_run for USB3 roothub
  465. [ 2.833590] xhci-hcd xhci-hcd.2.auto: Port Status Change Event for port 2
  466. [ 2.833605] xhci-hcd xhci-hcd.2.auto: handle_port_status: starting port polling.
  467. [ 2.833624] xhci-hcd xhci-hcd.2.auto: Port Status Change Event for port 1
  468. [ 2.833635] xhci-hcd xhci-hcd.2.auto: handle_port_status: starting port polling.
  469. [ 2.833667] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  470. [ 2.841822] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  471. [ 2.848355] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  472. [ 2.855519] usb usb4: Product: xHCI Host Controller
  473. [ 2.860448] usb usb4: Manufacturer: Linux 4.13.0-xu4ml xhci-hcd
  474. [ 2.866257] usb usb4: SerialNumber: xhci-hcd.2.auto
  475. [ 2.871854] xHCI xhci_add_endpoint called for root hub
  476. [ 2.871862] xHCI xhci_check_bandwidth called for root hub
  477. [ 2.871872] xhci-hcd xhci-hcd.2.auto: Endpoint 0x81 ep reset callback called
  478. [ 2.872051] hub 4-0:1.0: USB hub found
  479. [ 2.874866] hub 4-0:1.0: 1 port detected
  480. [ 2.878928] xhci-hcd xhci-hcd.2.auto: set port power, actual port 0 status = 0x40100088
  481. [ 2.882087] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  482. [ 2.886143] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
  483. [ 2.893837] xhci-hcd xhci-hcd.5.auto: xHCI capability registers at f0a60000:
  484. [ 2.893846] xhci-hcd xhci-hcd.5.auto: CAPLENGTH AND HCIVERSION 0x1000020:
  485. [ 2.893853] xhci-hcd xhci-hcd.5.auto: CAPLENGTH: 0x20
  486. [ 2.893859] xhci-hcd xhci-hcd.5.auto: HCIVERSION: 0x100
  487. [ 2.893866] xhci-hcd xhci-hcd.5.auto: HCSPARAMS 1: 0x2000140
  488. [ 2.893873] xhci-hcd xhci-hcd.5.auto: Max device slots: 64
  489. [ 2.893880] xhci-hcd xhci-hcd.5.auto: Max interrupters: 1
  490. [ 2.893886] xhci-hcd xhci-hcd.5.auto: Max ports: 2
  491. [ 2.893894] xhci-hcd xhci-hcd.5.auto: HCSPARAMS 2: 0xc0000f1
  492. [ 2.893900] xhci-hcd xhci-hcd.5.auto: Isoc scheduling threshold: 1
  493. [ 2.893908] xhci-hcd xhci-hcd.5.auto: Maximum allowed segments in event ring: 15
  494. [ 2.893915] xhci-hcd xhci-hcd.5.auto: HCSPARAMS 3 0x7ff000a:
  495. [ 2.893923] xhci-hcd xhci-hcd.5.auto: Worst case U1 device exit latency: 10
  496. [ 2.893931] xhci-hcd xhci-hcd.5.auto: Worst case U2 device exit latency: 2047
  497. [ 2.893938] xhci-hcd xhci-hcd.5.auto: HCC PARAMS 0x220f04c:
  498. [ 2.893944] xhci-hcd xhci-hcd.5.auto: HC generates 32 bit addresses
  499. [ 2.893951] xhci-hcd xhci-hcd.5.auto: HC hasn't Contiguous Frame ID Capability
  500. [ 2.893959] xhci-hcd xhci-hcd.5.auto: HC can't generate Stopped - Short Package event
  501. [ 2.893965] xhci-hcd xhci-hcd.5.auto: FIXME: more HCCPARAMS debugging
  502. [ 2.893973] xhci-hcd xhci-hcd.5.auto: RTSOFF 0x440:
  503. [ 2.893981] xhci-hcd xhci-hcd.5.auto: xHCI operational registers at f0a60020:
  504. [ 2.893988] xhci-hcd xhci-hcd.5.auto: USBCMD 0x0:
  505. [ 2.893995] xhci-hcd xhci-hcd.5.auto: HC is being stopped
  506. [ 2.894002] xhci-hcd xhci-hcd.5.auto: HC has finished hard reset
  507. [ 2.894009] xhci-hcd xhci-hcd.5.auto: Event Interrupts disabled
  508. [ 2.894015] xhci-hcd xhci-hcd.5.auto: Host System Error Interrupts disabled
  509. [ 2.894022] xhci-hcd xhci-hcd.5.auto: HC has finished light reset
  510. [ 2.894029] xhci-hcd xhci-hcd.5.auto: USBSTS 0x11:
  511. [ 2.894036] xhci-hcd xhci-hcd.5.auto: Event ring is empty
  512. [ 2.894043] xhci-hcd xhci-hcd.5.auto: No Host System Error
  513. [ 2.894049] xhci-hcd xhci-hcd.5.auto: HC is halted
  514. [ 2.894057] xhci-hcd xhci-hcd.5.auto: f0a60420 port status reg = 0x400206e1
  515. [ 2.894064] xhci-hcd xhci-hcd.5.auto: f0a60424 port power reg = 0x0
  516. [ 2.894072] xhci-hcd xhci-hcd.5.auto: f0a60428 port link reg = 0x0
  517. [ 2.894080] xhci-hcd xhci-hcd.5.auto: f0a6042c port reserved reg = 0x0
  518. [ 2.894087] xhci-hcd xhci-hcd.5.auto: f0a60430 port status reg = 0x40100088
  519. [ 2.894095] xhci-hcd xhci-hcd.5.auto: f0a60434 port power reg = 0x0
  520. [ 2.894102] xhci-hcd xhci-hcd.5.auto: f0a60438 port link reg = 0x0
  521. [ 2.894110] xhci-hcd xhci-hcd.5.auto: f0a6043c port reserved reg = 0x0
  522. [ 2.894118] xhci-hcd xhci-hcd.5.auto: // Halt the HC
  523. [ 2.894129] xhci-hcd xhci-hcd.5.auto: Resetting HCD
  524. [ 2.894136] xhci-hcd xhci-hcd.5.auto: // Reset the HC
  525. [ 2.894181] xhci-hcd xhci-hcd.5.auto: Wait for controller to be ready for doorbell rings
  526. [ 2.894188] xhci-hcd xhci-hcd.5.auto: Reset complete
  527. [ 2.894197] xhci-hcd xhci-hcd.5.auto: Enabling 32-bit DMA addresses.
  528. [ 2.894204] xhci-hcd xhci-hcd.5.auto: Calling HCD init
  529. [ 2.894211] xhci-hcd xhci-hcd.5.auto: xhci_init
  530. [ 2.894217] xhci-hcd xhci-hcd.5.auto: xHCI doesn't need link TRB QUIRK
  531. [ 2.894225] xhci-hcd xhci-hcd.5.auto: Supported page size register = 0x1
  532. [ 2.894233] xhci-hcd xhci-hcd.5.auto: Supported page size of 4K
  533. [ 2.894240] xhci-hcd xhci-hcd.5.auto: HCD page size set to 4K
  534. [ 2.894248] xhci-hcd xhci-hcd.5.auto: // xHC can handle at most 64 device slots.
  535. [ 2.894255] xhci-hcd xhci-hcd.5.auto: // Setting Max device slots reg = 0x40.
  536. [ 2.894346] xhci-hcd xhci-hcd.5.auto: // Device context base array address = 0xb8852000 (DMA), f0a5b000 (virt)
  537. [ 2.894407] xhci-hcd xhci-hcd.5.auto: Allocated command ring at c2145500
  538. [ 2.894415] xhci-hcd xhci-hcd.5.auto: First segment DMA is 0xb8853000
  539. [ 2.894424] xhci-hcd xhci-hcd.5.auto: // Setting command ring address to 0x00000000b8853001
  540. [ 2.894433] xhci-hcd xhci-hcd.5.auto: // xHC command ring deq ptr low bits + flags = @00000000
  541. [ 2.894440] xhci-hcd xhci-hcd.5.auto: // xHC command ring deq ptr high bits = @00000000
  542. [ 2.894494] xhci-hcd xhci-hcd.5.auto: // Doorbell array is located at offset 0x480 from cap regs base addr
  543. [ 2.894502] xhci-hcd xhci-hcd.5.auto: // xHCI capability registers at f0a60000:
  544. [ 2.894511] xhci-hcd xhci-hcd.5.auto: // @f0a60000 = 0x1000020 (CAPLENGTH AND HCIVERSION)
  545. [ 2.894517] xhci-hcd xhci-hcd.5.auto: // CAPLENGTH: 0x20
  546. [ 2.894524] xhci-hcd xhci-hcd.5.auto: // HCIVERSION: 0x100
  547. [ 2.894531] xhci-hcd xhci-hcd.5.auto: // xHCI operational registers at f0a60020:
  548. [ 2.894539] xhci-hcd xhci-hcd.5.auto: // @f0a60018 = 0x440 RTSOFF
  549. [ 2.894546] xhci-hcd xhci-hcd.5.auto: // xHCI runtime registers at f0a60440:
  550. [ 2.894553] xhci-hcd xhci-hcd.5.auto: // @f0a60014 = 0x480 DBOFF
  551. [ 2.894560] xhci-hcd xhci-hcd.5.auto: // Doorbell array at f0a60480:
  552. [ 2.894567] xhci-hcd xhci-hcd.5.auto: xHCI runtime registers at f0a60440:
  553. [ 2.894575] xhci-hcd xhci-hcd.5.auto: f0a60440: Microframe index = 0x0
  554. [ 2.894585] xhci-hcd xhci-hcd.5.auto: // Allocating event ring
  555. [ 2.894643] xhci-hcd xhci-hcd.5.auto: TRB math tests passed.
  556. [ 2.894688] xhci-hcd xhci-hcd.5.auto: // Allocated event ring segment table at 0xb8856000
  557. [ 2.894697] xhci-hcd xhci-hcd.5.auto: Set ERST to 0; private num segs = 1, virt addr = f0a6d000, dma addr = 0xb8856000
  558. [ 2.894706] xhci-hcd xhci-hcd.5.auto: // Write ERST size = 1 to ir_set 0 (some bits preserved)
  559. [ 2.894713] xhci-hcd xhci-hcd.5.auto: // Set ERST entries to point to event ring.
  560. [ 2.894720] xhci-hcd xhci-hcd.5.auto: // Set ERST base address for ir_set 0 = 0xb8856000
  561. [ 2.894729] xhci-hcd xhci-hcd.5.auto: // Write event ring dequeue pointer, preserving EHB bit
  562. [ 2.894737] xhci-hcd xhci-hcd.5.auto: Wrote ERST address to ir_set 0.
  563. [ 2.894747] xhci-hcd xhci-hcd.5.auto: Allocating 1 scratchpad buffers
  564. [ 2.894866] xhci-hcd xhci-hcd.5.auto: Ext Cap f0a60890, port offset = 1, count = 1, revision = 0x2
  565. [ 2.894875] xhci-hcd xhci-hcd.5.auto: xHCI 1.0: support USB2 software lpm
  566. [ 2.894882] xhci-hcd xhci-hcd.5.auto: xHCI 1.0: support USB2 hardware lpm
  567. [ 2.894893] xhci-hcd xhci-hcd.5.auto: Ext Cap f0a608a0, port offset = 2, count = 1, revision = 0x3
  568. [ 2.894901] xhci-hcd xhci-hcd.5.auto: Found 1 USB 2.0 ports and 1 USB 3.0 ports.
  569. [ 2.894910] xhci-hcd xhci-hcd.5.auto: USB 2.0 port at index 0, addr = f0a60420
  570. [ 2.894918] xhci-hcd xhci-hcd.5.auto: USB 3.0 port at index 1, addr = f0a60430
  571. [ 2.894926] xhci-hcd xhci-hcd.5.auto: Finished xhci_init
  572. [ 2.894933] xhci-hcd xhci-hcd.5.auto: Called HCD init
  573. [ 2.894940] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010
  574. [ 2.902528] xhci-hcd xhci-hcd.5.auto: irq 137, io mem 0x12400000
  575. [ 2.908406] xhci-hcd xhci-hcd.5.auto: xhci_run
  576. [ 2.908415] xhci-hcd xhci-hcd.5.auto: // xHC command ring deq ptr low bits + flags = @00000000
  577. [ 2.908422] xhci-hcd xhci-hcd.5.auto: // xHC command ring deq ptr high bits = @00000000
  578. [ 2.908429] xhci-hcd xhci-hcd.5.auto: ERST memory map follows:
  579. [ 2.908438] xhci-hcd xhci-hcd.5.auto: @00000000b8856000 b8855000 00000000 00000100 00000000
  580. [ 2.908446] xhci-hcd xhci-hcd.5.auto: ERST deq = 64'hb8855000
  581. [ 2.908453] xhci-hcd xhci-hcd.5.auto: // Set the interrupt modulation register
  582. [ 2.908461] xhci-hcd xhci-hcd.5.auto: // Enable interrupts, cmd = 0x4.
  583. [ 2.908470] xhci-hcd xhci-hcd.5.auto: // Enabling event ring interrupter f0a60460 by writing 0x2 to irq_pending
  584. [ 2.908478] xhci-hcd xhci-hcd.5.auto: f0a60460: ir_set[0]
  585. [ 2.908486] xhci-hcd xhci-hcd.5.auto: f0a60460: ir_set.pending = 0x2
  586. [ 2.908494] xhci-hcd xhci-hcd.5.auto: f0a60464: ir_set.control = 0xa0
  587. [ 2.908501] xhci-hcd xhci-hcd.5.auto: f0a60468: ir_set.erst_size = 0x1
  588. [ 2.908510] xhci-hcd xhci-hcd.5.auto: f0a60470: ir_set.erst_base = @b8856000
  589. [ 2.908518] xhci-hcd xhci-hcd.5.auto: f0a60478: ir_set.erst_dequeue = @b8855000
  590. [ 2.908525] xhci-hcd xhci-hcd.5.auto: Finished xhci_run for USB2 roothub
  591. [ 2.908717] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  592. [ 2.915139] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  593. [ 2.922366] usb usb5: Product: xHCI Host Controller
  594. [ 2.927220] usb usb5: Manufacturer: Linux 4.13.0-xu4ml xhci-hcd
  595. [ 2.933072] usb usb5: SerialNumber: xhci-hcd.5.auto
  596. [ 2.938228] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x400206e1
  597. [ 2.938235] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x10101
  598. [ 2.938289] xhci-hcd xhci-hcd.2.auto: clear port connect change, actual port 0 status = 0x400006e1
  599. [ 2.938655] xHCI xhci_add_endpoint called for root hub
  600. [ 2.938663] xHCI xhci_check_bandwidth called for root hub
  601. [ 2.938675] xhci-hcd xhci-hcd.5.auto: Endpoint 0x81 ep reset callback called
  602. [ 2.938866] hub 5-0:1.0: USB hub found
  603. [ 2.941687] hub 5-0:1.0: 1 port detected
  604. [ 2.945689] xhci-hcd xhci-hcd.5.auto: set port power, actual port 0 status = 0x400206e1
  605. [ 2.945928] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  606. [ 2.951072] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
  607. [ 2.958683] xhci-hcd xhci-hcd.5.auto: // Turn on HC, cmd = 0x5.
  608. [ 2.958692] xhci-hcd xhci-hcd.5.auto: Finished xhci_run for USB3 roothub
  609. [ 2.958706] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 2
  610. [ 2.958716] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  611. [ 2.958731] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 1
  612. [ 2.958741] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  613. [ 2.958787] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  614. [ 2.966864] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  615. [ 2.973458] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  616. [ 2.980680] usb usb6: Product: xHCI Host Controller
  617. [ 2.985497] usb usb6: Manufacturer: Linux 4.13.0-xu4ml xhci-hcd
  618. [ 2.991421] usb usb6: SerialNumber: xhci-hcd.5.auto
  619. [ 2.996532] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x40100088
  620. [ 2.996540] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x80088
  621. [ 2.996599] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x40100088
  622. [ 2.996607] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x80088
  623. [ 2.996645] xhci-hcd xhci-hcd.2.auto: clear port over-current change, actual port 0 status = 0x40000088
  624. [ 2.996917] xHCI xhci_add_endpoint called for root hub
  625. [ 2.996924] xHCI xhci_check_bandwidth called for root hub
  626. [ 2.996933] xhci-hcd xhci-hcd.5.auto: Endpoint 0x81 ep reset callback called
  627. [ 2.997118] hub 6-0:1.0: USB hub found
  628. [ 2.999999] hub 6-0:1.0: 1 port detected
  629. [ 3.004017] xhci-hcd xhci-hcd.5.auto: set port power, actual port 0 status = 0x40100088
  630. [ 3.005297] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
  631. [ 3.009484] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  632. [ 3.009579] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it
  633. [ 3.016826] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0
  634. [ 3.022393] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
  635. [ 3.030158] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
  636. [ 3.037899] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
  637. [ 3.045648] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
  638. [ 3.054061] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
  639. [ 3.061721] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  640. [ 3.062440] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
  641. [ 3.070777] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
  642. [ 3.078776] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
  643. [ 3.087053] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
  644. [ 3.095223] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
  645. [ 3.103224] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
  646. [ 3.111527] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
  647. [ 3.118868] xhci-hcd xhci-hcd.2.auto: set port power, actual port 0 status = 0x40000088
  648. [ 3.119765] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
  649. [ 3.127943] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
  650. [ 3.136700] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
  651. [ 3.144803] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
  652. [ 3.153776] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
  653. [ 3.161756] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x400206e1
  654. [ 3.161764] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x10101
  655. [ 3.161823] xhci-hcd xhci-hcd.5.auto: clear port connect change, actual port 0 status = 0x400006e1
  656. [ 3.161922] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40100088
  657. [ 3.161929] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x80088
  658. [ 3.162411] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x400006e1
  659. [ 3.162419] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x101
  660. [ 3.162496] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  661. [ 3.162824] xhci-hcd xhci-hcd.2.auto: Slot 1 output ctx = 0xb8859000 (dma)
  662. [ 3.162889] xhci-hcd xhci-hcd.2.auto: Slot 1 input ctx = 0xb885a000 (dma)
  663. [ 3.162988] xhci-hcd xhci-hcd.2.auto: Set slot id 1 dcbaa entry f0a29008 to 0xb8859000
  664. [ 3.163034] xhci-hcd xhci-hcd.2.auto: set port reset, actual port 0 status = 0x400006f1
  665. [ 3.163097] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40100088
  666. [ 3.163104] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x80088
  667. [ 3.163145] xhci-hcd xhci-hcd.5.auto: clear port over-current change, actual port 0 status = 0x40000088
  668. [ 3.163663] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:00:08 UTC (946684808)
  669. [ 3.170702] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  670. [ 3.170711] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  671. [ 3.173893] ALSA device list:
  672. [ 3.175408] No soundcards found.
  673. [ 3.183701] Freeing unused kernel memory: 1024K
  674. [ 3.213361] xhci-hcd xhci-hcd.2.auto: Port Status Change Event for port 1
  675. [ 3.213385] xhci-hcd xhci-hcd.2.auto: handle_port_status: starting port polling.
  676. [ 3.226679] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x40200e03
  677. [ 3.226696] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x100503
  678. [ 3.226782] xhci-hcd xhci-hcd.2.auto: clear port reset change, actual port 0 status = 0x40000e03
  679. [ 3.236551] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x40000088
  680. [ 3.236560] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x88
  681. [ 3.236597] usb usb4-port1: over-current condition
  682. [ 3.240008] xhci-hcd xhci-hcd.2.auto: set port power, actual port 0 status = 0x40000088
  683. [ 3.240171] xhci-hcd xhci-hcd.2.auto: set port remote wake mask, actual port 0 status = 0x4e000088
  684. [ 3.240287] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  685. [ 3.266660] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x400006e1
  686. [ 3.266677] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x101
  687. [ 3.266774] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  688. [ 3.270703] xhci-hcd xhci-hcd.5.auto: Slot 1 output ctx = 0xb885d000 (dma)
  689. [ 3.270845] xhci-hcd xhci-hcd.5.auto: Slot 1 input ctx = 0xb885e000 (dma)
  690. [ 3.271113] xhci-hcd xhci-hcd.5.auto: Set slot id 1 dcbaa entry f0a5b008 to 0xb885d000
  691. [ 3.271182] xhci-hcd xhci-hcd.5.auto: set port reset, actual port 0 status = 0x400006f1
  692. [ 3.276543] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  693. [ 3.276621] xhci-hcd xhci-hcd.5.auto: set port power, actual port 0 status = 0x40000088
  694. [ 3.296620] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  695. [ 3.301743] xhci-hcd xhci-hcd.2.auto: Set root hub portnum to 1
  696. [ 3.301751] xhci-hcd xhci-hcd.2.auto: Set fake root hub portnum to 1
  697. [ 3.301762] xhci-hcd xhci-hcd.2.auto: udev->tt = (null)
  698. [ 3.301770] xhci-hcd xhci-hcd.2.auto: udev->ttport = 0x0
  699. [ 3.301795] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  700. [ 3.301887] xhci-hcd xhci-hcd.2.auto: Successful setup context command
  701. [ 3.301898] xhci-hcd xhci-hcd.2.auto: Op regs DCBAA ptr = 0x000000b884a000
  702. [ 3.301906] xhci-hcd xhci-hcd.2.auto: Slot ID 1 dcbaa entry @f0a29008 = 0x000000b8859000
  703. [ 3.301914] xhci-hcd xhci-hcd.2.auto: Output Context DMA address = 0xb8859000
  704. [ 3.301921] xhci-hcd xhci-hcd.2.auto: Internal device address = 0
  705. [ 3.302394] xhci-hcd xhci-hcd.2.auto: Waiting for status stage event
  706. [ 3.302476] xhci-hcd xhci-hcd.2.auto: set port reset, actual port 0 status = 0x40000ef1
  707. [ 3.306541] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  708. [ 3.321416] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 1
  709. [ 3.321438] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  710. [ 3.336624] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40200e03
  711. [ 3.336657] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x100503
  712. [ 3.336847] xhci-hcd xhci-hcd.5.auto: clear port reset change, actual port 0 status = 0x40000e03
  713. [ 3.352821] xhci-hcd xhci-hcd.2.auto: Port Status Change Event for port 1
  714. [ 3.352851] xhci-hcd xhci-hcd.2.auto: handle_port_status: starting port polling.
  715. [ 3.366629] xhci-hcd xhci-hcd.2.auto: get port status, actual port 0 status = 0x40200e03
  716. [ 3.366653] xhci-hcd xhci-hcd.2.auto: Get port status returned 0x100503
  717. [ 3.366815] xhci-hcd xhci-hcd.2.auto: clear port reset change, actual port 0 status = 0x40000e03
  718. [ 3.396635] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40000088
  719. [ 3.396659] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x88
  720. [ 3.396919] usb usb6-port1: over-current condition
  721. [ 3.400330] xhci-hcd xhci-hcd.5.auto: set port power, actual port 0 status = 0x40000088
  722. [ 3.400472] xhci-hcd xhci-hcd.5.auto: set port remote wake mask, actual port 0 status = 0x4e000088
  723. [ 3.400629] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  724. [ 3.406632] usb 5-1: new high-speed USB device number 2 using xhci-hcd
  725. [ 3.411761] xhci-hcd xhci-hcd.5.auto: Set root hub portnum to 1
  726. [ 3.411782] xhci-hcd xhci-hcd.5.auto: Set fake root hub portnum to 1
  727. [ 3.411803] xhci-hcd xhci-hcd.5.auto: udev->tt = (null)
  728. [ 3.411821] xhci-hcd xhci-hcd.5.auto: udev->ttport = 0x0
  729. [ 3.411854] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  730. [ 3.411939] xhci-hcd xhci-hcd.5.auto: Successful setup context command
  731. [ 3.411962] xhci-hcd xhci-hcd.5.auto: Op regs DCBAA ptr = 0x000000b8852000
  732. [ 3.411985] xhci-hcd xhci-hcd.5.auto: Slot ID 1 dcbaa entry @f0a5b008 = 0x000000b885d000
  733. [ 3.412005] xhci-hcd xhci-hcd.5.auto: Output Context DMA address = 0xb885d000
  734. [ 3.412023] xhci-hcd xhci-hcd.5.auto: Internal device address = 0
  735. [ 3.412119] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  736. [ 3.412209] xhci-hcd xhci-hcd.5.auto: set port reset, actual port 0 status = 0x40000ef1
  737. [ 3.436625] xhci-hcd xhci-hcd.2.auto: Resetting device with slot ID 1
  738. [ 3.436664] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  739. [ 3.436711] xhci-hcd xhci-hcd.2.auto: Completed reset device command.
  740. [ 3.436850] xhci-hcd xhci-hcd.2.auto: Can't reset device (slot ID 1) in default state
  741. [ 3.436869] xhci-hcd xhci-hcd.2.auto: Not freeing device rings.
  742. [ 3.436904] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  743. [ 3.437203] xhci-hcd xhci-hcd.2.auto: Successful setup address command
  744. [ 3.437228] xhci-hcd xhci-hcd.2.auto: Op regs DCBAA ptr = 0x000000b884a000
  745. [ 3.437251] xhci-hcd xhci-hcd.2.auto: Slot ID 1 dcbaa entry @f0a29008 = 0x000000b8859000
  746. [ 3.437271] xhci-hcd xhci-hcd.2.auto: Output Context DMA address = 0xb8859000
  747. [ 3.437290] xhci-hcd xhci-hcd.2.auto: Internal device address = 0
  748. [ 3.437318] xhci-hcd xhci-hcd.2.auto: Endpoint 0x0 ep reset callback called
  749. [ 3.462518] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 1
  750. [ 3.462545] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  751. [ 3.468320] xhci-hcd xhci-hcd.2.auto: Waiting for status stage event
  752. [ 3.468691] xhci-hcd xhci-hcd.2.auto: Waiting for status stage event
  753. [ 3.469080] xhci-hcd xhci-hcd.2.auto: Waiting for status stage event
  754. [ 3.469162] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
  755. [ 3.474463] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  756. [ 3.481722] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40200e03
  757. [ 3.481738] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x100503
  758. [ 3.481975] xhci-hcd xhci-hcd.5.auto: clear port reset change, actual port 0 status = 0x40000e03
  759. [ 3.486585] usb 3-1: Product: USB2.0 Hub
  760. [ 3.489085] usb 3-1: Manufacturer: GenesysLogic
  761. [ 3.507452] xhci-hcd xhci-hcd.2.auto: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
  762. [ 3.507472] xhci-hcd xhci-hcd.2.auto: xhci_check_bandwidth called for udev c2174400
  763. [ 3.507516] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  764. [ 3.537677] xhci-hcd xhci-hcd.2.auto: Successful Endpoint Configure command
  765. [ 3.537712] xhci-hcd xhci-hcd.2.auto: Endpoint 0x81 ep reset callback called
  766. [ 3.538524] hub 3-1:1.0: USB hub found
  767. [ 3.541181] xhci-hcd xhci-hcd.2.auto: Waiting for status stage event
  768. [ 3.541241] hub 3-1:1.0: 2 ports detected
  769. [ 3.544827] xhci-hcd xhci-hcd.2.auto: xhci_drop_endpoint called for udev c2174400
  770. [ 3.544845] xhci-hcd xhci-hcd.2.auto: drop ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x0
  771. [ 3.545175] xhci-hcd xhci-hcd.2.auto: add ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x8
  772. [ 3.545188] xhci-hcd xhci-hcd.2.auto: xhci_check_bandwidth called for udev c2174400
  773. [ 3.545223] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  774. [ 3.546571] xhci-hcd xhci-hcd.5.auto: Resetting device with slot ID 1
  775. [ 3.546589] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  776. [ 3.546618] xhci-hcd xhci-hcd.5.auto: Completed reset device command.
  777. [ 3.546671] xhci-hcd xhci-hcd.5.auto: Can't reset device (slot ID 1) in default state
  778. [ 3.546680] xhci-hcd xhci-hcd.5.auto: Not freeing device rings.
  779. [ 3.546704] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  780. [ 3.546758] xhci-hcd xhci-hcd.5.auto: Successful setup address command
  781. [ 3.546769] xhci-hcd xhci-hcd.5.auto: Op regs DCBAA ptr = 0x000000b8852000
  782. [ 3.546778] xhci-hcd xhci-hcd.5.auto: Slot ID 1 dcbaa entry @f0a5b008 = 0x000000b885d000
  783. [ 3.546787] xhci-hcd xhci-hcd.5.auto: Output Context DMA address = 0xb885d000
  784. [ 3.546796] xhci-hcd xhci-hcd.5.auto: Internal device address = 0
  785. [ 3.546810] xhci-hcd xhci-hcd.5.auto: Endpoint 0x0 ep reset callback called
  786. [ 3.556531] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  787. [ 3.556536] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  788. [ 3.569666] xhci-hcd xhci-hcd.2.auto: Successful Endpoint Configure command
  789. [ 3.569905] xhci-hcd xhci-hcd.2.auto: Endpoint 0x81 ep reset callback called
  790. [ 3.571101] xhci-hcd xhci-hcd.2.auto: xHCI version 100 needs hub TT think time and number of ports
  791. [ 3.571116] xhci-hcd xhci-hcd.2.auto: Set up configure endpoint for hub device.
  792. [ 3.571141] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  793. [ 3.571219] xhci-hcd xhci-hcd.2.auto: Successful Endpoint Configure command
  794. [ 3.577540] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  795. [ 3.577641] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  796. [ 3.577740] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  797. [ 3.577829] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  798. [ 3.577891] usb 5-1: New USB device found, idVendor=0bda, idProduct=8153
  799. [ 3.583170] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
  800. [ 3.590316] usb 5-1: Product: USB 10/100/1000 LAN
  801. [ 3.594923] usb 5-1: Manufacturer: Realtek
  802. [ 3.599050] usb 5-1: SerialNumber: 000001000000
  803. [ 3.604697] xhci-hcd xhci-hcd.5.auto: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x80
  804. [ 3.604716] xhci-hcd xhci-hcd.5.auto: xhci_check_bandwidth called for udev c2174c00
  805. [ 3.604760] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  806. [ 3.614840] xhci-hcd xhci-hcd.5.auto: Successful Endpoint Configure command
  807. [ 3.614874] xhci-hcd xhci-hcd.5.auto: Endpoint 0x83 ep reset callback called
  808. [ 3.615362] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  809. [ 3.617380] xhci-hcd xhci-hcd.5.auto: xhci_drop_endpoint called for udev c2174c00
  810. [ 3.617401] xhci-hcd xhci-hcd.5.auto: drop ep 0x83, slot id 1, new drop flags = 0x80, new add flags = 0x0
  811. [ 3.617415] xhci-hcd xhci-hcd.5.auto: xhci_check_bandwidth called for udev c2174c00
  812. [ 3.617453] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  813. [ 3.630780] xhci-hcd xhci-hcd.5.auto: Successful Endpoint Configure command
  814. [ 3.630847] xhci-hcd xhci-hcd.5.auto: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
  815. [ 3.631313] xhci-hcd xhci-hcd.5.auto: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x18
  816. [ 3.631423] xhci-hcd xhci-hcd.5.auto: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x98
  817. [ 3.631433] xhci-hcd xhci-hcd.5.auto: xhci_check_bandwidth called for udev c2174c00
  818. [ 3.631466] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  819. [ 3.646779] xhci-hcd xhci-hcd.5.auto: Successful Endpoint Configure command
  820. [ 3.646812] xhci-hcd xhci-hcd.5.auto: Endpoint 0x81 ep reset callback called
  821. [ 3.646826] xhci-hcd xhci-hcd.5.auto: Endpoint 0x2 ep reset callback called
  822. [ 3.646836] xhci-hcd xhci-hcd.5.auto: Endpoint 0x83 ep reset callback called
  823. [ 3.647557] xhci-hcd xhci-hcd.5.auto: Endpoint 0x0 ep reset callback called
  824. [ 3.647596] xhci-hcd xhci-hcd.5.auto: set port reset, actual port 0 status = 0x40000ef1
  825. [ 3.677888] xhci-hcd xhci-hcd.2.auto: Cancel URB c21f6a00, dev 1, ep 0x81, starting at offset 0xb8863000
  826. [ 3.677912] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  827. [ 3.677938] xhci-hcd xhci-hcd.2.auto: Stopped on Transfer TRB for slot 1 ep 2
  828. [ 3.677956] xhci-hcd xhci-hcd.2.auto: Removing canceled TD starting at 0xb8863000 (dma).
  829. [ 3.677966] xhci-hcd xhci-hcd.2.auto: Finding endpoint context
  830. [ 3.677975] xhci-hcd xhci-hcd.2.auto: Cycle state = 0x1
  831. [ 3.677982] xhci-hcd xhci-hcd.2.auto: New dequeue segment = c21f0b00 (virtual)
  832. [ 3.677990] xhci-hcd xhci-hcd.2.auto: New dequeue pointer = 0xb8863010 (DMA)
  833. [ 3.678001] xhci-hcd xhci-hcd.2.auto: Set TR Deq Ptr cmd, new deq seg = c21f0b00 (0xb8863000 dma), new deq ptr = f0aff010 (0xb8863010 dma), new cycle = 1
  834. [ 3.678011] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  835. [ 3.678041] xhci-hcd xhci-hcd.2.auto: Successful Set TR Deq Ptr cmd, deq = @b8863010
  836. [ 3.678368] xhci-hcd xhci-hcd.2.auto: // Ding dong!
  837. [ 3.697881] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 1
  838. [ 3.697897] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  839. [ 3.716553] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40200e03
  840. [ 3.716567] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x100503
  841. [ 3.716628] xhci-hcd xhci-hcd.5.auto: clear port reset change, actual port 0 status = 0x40000e03
  842. [ 3.736656] xhci-hcd xhci-hcd.2.auto: xhci_hub_status_data: stopping port polling.
  843. [ 3.786591] xhci-hcd xhci-hcd.5.auto: Resetting device with slot ID 1
  844. [ 3.786618] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  845. [ 3.790708] xhci-hcd xhci-hcd.5.auto: Completed reset device command.
  846. [ 3.790771] xhci-hcd xhci-hcd.5.auto: Successful reset device command.
  847. [ 3.790854] usb 5-1: reset high-speed USB device number 2 using xhci-hcd
  848. [ 3.796119] xhci-hcd xhci-hcd.5.auto: Slot already in default state
  849. [ 3.796192] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  850. [ 3.796414] xhci-hcd xhci-hcd.5.auto: set port reset, actual port 0 status = 0x40000ef1
  851. [ 3.806535] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  852. [ 3.846644] xhci-hcd xhci-hcd.5.auto: Port Status Change Event for port 1
  853. [ 3.846667] xhci-hcd xhci-hcd.5.auto: handle_port_status: starting port polling.
  854. [ 3.866665] xhci-hcd xhci-hcd.5.auto: get port status, actual port 0 status = 0x40200e03
  855. [ 3.866680] xhci-hcd xhci-hcd.5.auto: Get port status returned 0x100503
  856. [ 3.866758] xhci-hcd xhci-hcd.5.auto: clear port reset change, actual port 0 status = 0x40000e03
  857. [ 3.936625] xhci-hcd xhci-hcd.5.auto: Resetting device with slot ID 1
  858. [ 3.936665] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  859. [ 3.936701] xhci-hcd xhci-hcd.5.auto: Completed reset device command.
  860. [ 3.936760] xhci-hcd xhci-hcd.5.auto: Can't reset device (slot ID 1) in default state
  861. [ 3.936770] xhci-hcd xhci-hcd.5.auto: Not freeing device rings.
  862. [ 3.936798] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  863. [ 3.936881] xhci-hcd xhci-hcd.5.auto: Successful setup address command
  864. [ 3.936896] xhci-hcd xhci-hcd.5.auto: Op regs DCBAA ptr = 0x000000b8852000
  865. [ 3.936909] xhci-hcd xhci-hcd.5.auto: Slot ID 1 dcbaa entry @f0a5b008 = 0x000000b885d000
  866. [ 3.936921] xhci-hcd xhci-hcd.5.auto: Output Context DMA address = 0xb885d000
  867. [ 3.936932] xhci-hcd xhci-hcd.5.auto: Internal device address = 0
  868. [ 3.936952] xhci-hcd xhci-hcd.5.auto: Endpoint 0x0 ep reset callback called
  869. [ 3.967246] xhci-hcd xhci-hcd.5.auto: Waiting for status stage event
  870. [ 3.967306] xhci-hcd xhci-hcd.5.auto: xhci_drop_endpoint called for udev c2174c00
  871. [ 3.967322] xhci-hcd xhci-hcd.5.auto: xhci_drop_endpoint called for udev c2174c00
  872. [ 3.967334] xhci-hcd xhci-hcd.5.auto: xhci_drop_endpoint called for udev c2174c00
  873. [ 3.967379] xhci-hcd xhci-hcd.5.auto: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
  874. [ 3.967405] xhci-hcd xhci-hcd.5.auto: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x18
  875. [ 3.967426] xhci-hcd xhci-hcd.5.auto: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x98
  876. [ 3.967442] xhci-hcd xhci-hcd.5.auto: xhci_check_bandwidth called for udev c2174c00
  877. [ 3.967483] xhci-hcd xhci-hcd.5.auto: // Ding dong!
  878. [ 3.982771] xhci-hcd xhci-hcd.5.auto: Successful Endpoint Configure command
  879. [ 3.982940] xhci-hcd xhci-hcd.5.auto: Endpoint 0x81 ep reset callback called
  880. [ 3.982947] xhci-hcd xhci-hcd.5.auto: Endpoint 0x2 ep reset callback called
  881. [ 3.982955] xhci-hcd xhci-hcd.5.auto: Endpoint 0x83 ep reset callback called
  882. [ 4.028103] r8152 5-1:1.0 eth0: v1.09.9
  883. [ 4.056559] xhci-hcd xhci-hcd.5.auto: xhci_hub_status_data: stopping port polling.
  884. [ 5.707407] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
  885. [ 5.713607] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
  886. [ 16.100731] random: crng init done
  887. [ 23.601351] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
  888. [ 24.122083] systemd[1]: System time before build time, advancing clock.
  889. [ 24.235083] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  890. [ 24.252979] systemd[1]: Detected architecture arm.
  891. [ 24.297893] systemd[1]: Set hostname to <odroid>.
  892. [ 24.835713] systemd[1]: Listening on udev Control Socket.
  893. [ 24.866976] systemd[1]: Listening on Journal Socket.
  894. [ 24.896984] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  895. [ 24.968293] systemd[1]: Created slice System Slice.
  896. [ 25.015183] systemd[1]: Starting Load Kernel Modules...
  897. [ 25.047550] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  898. [ 25.092105] systemd[1]: Started Read required files in advance.
  899. [ 25.559247] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
  900. [ 26.698338] systemd-journald[221]: Received request to flush runtime journal from PID 1
  901. [ 27.027761] media: Linux media interface: v0.10
  902. [ 27.115615] Linux video capture interface: v2.00
  903. [ 27.365778] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers
  904. [ 27.365968] s5p-mfc 11000000.codec: decoder registered as /dev/video0
  905. [ 27.366085] s5p-mfc 11000000.codec: encoder registered as /dev/video1
  906. [ 27.495789] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video2
  907. [ 27.495940] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video3
  908. [ 27.495947] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
  909. [ 27.496264] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video4
  910. [ 27.496407] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video5
  911. [ 27.496414] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
  912. [ 28.068907] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  913. [ 30.687153] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  914. [ 30.693896] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  915. [ 30.720345] r8152 5-1:1.0 eth0: carrier on
  916. [ 30.720426] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  917. [ 33.667354] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16248 bytes untransferred
  918. [ 33.677373] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 15760 bytes untransferred
  919. [ 33.796790] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 15760 bytes untransferred
  920. [ 33.856729] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 15760 bytes untransferred
  921. [ 33.983489] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16296 bytes untransferred
  922. [ 41.014021] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16216 bytes untransferred
  923. [ 43.317109] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16264 bytes untransferred
  924. [ 43.318605] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16224 bytes untransferred
  925. [ 48.327667] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16272 bytes untransferred
  926. [ 57.678062] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16248 bytes untransferred
  927. [ 58.619619] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16296 bytes untransferred
  928. [ 58.623480] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16064 bytes untransferred
  929. [ 58.624125] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16080 bytes untransferred
  930. [ 58.624622] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16056 bytes untransferred
  931. [ 58.625229] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16072 bytes untransferred
  932. [ 58.769887] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16264 bytes untransferred
  933. [ 63.617122] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16296 bytes untransferred
  934. [ 64.223504] xhci-hcd xhci-hcd.5.auto: ep 0x81 - asked for 16384 bytes, 16296 bytes untransferred
  935. root@odroid:~#
  936. root@odroid:~#
  937. root@odroid:~# uname -a
  938. Linux odroid 4.13.0-xu4ml #32 SMP PREEMPT Mon Sep 4 04:09:50 UTC 2017 armv7l armv7l armv7l GNU/Linux
  939. root@odroid:~#
  940. root@odroid:~#
  941. root@odroid:~# lsusb -t
  942. /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  943. /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  944. |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 480M
  945. /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  946. /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  947. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
  948. /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
  949. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
  950. root@odroid:~#
  951. root@odroid:~#
  952. root@odroid:~# lsusb -v
  953.  
  954. Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  955. Device Descriptor:
  956. bLength 18
  957. bDescriptorType 1
  958. bcdUSB 3.00
  959. bDeviceClass 9 Hub
  960. bDeviceSubClass 0 Unused
  961. bDeviceProtocol 3
  962. bMaxPacketSize0 9
  963. idVendor 0x1d6b Linux Foundation
  964. idProduct 0x0003 3.0 root hub
  965. bcdDevice 4.13
  966. iManufacturer 3 Linux 4.13.0-xu4ml xhci-hcd
  967. iProduct 2 xHCI Host Controller
  968. iSerial 1 xhci-hcd.5.auto
  969. bNumConfigurations 1
  970. Configuration Descriptor:
  971. bLength 9
  972. bDescriptorType 2
  973. wTotalLength 31
  974. bNumInterfaces 1
  975. bConfigurationValue 1
  976. iConfiguration 0
  977. bmAttributes 0xe0
  978. Self Powered
  979. Remote Wakeup
  980. MaxPower 0mA
  981. Interface Descriptor:
  982. bLength 9
  983. bDescriptorType 4
  984. bInterfaceNumber 0
  985. bAlternateSetting 0
  986. bNumEndpoints 1
  987. bInterfaceClass 9 Hub
  988. bInterfaceSubClass 0 Unused
  989. bInterfaceProtocol 0 Full speed (or root) hub
  990. iInterface 0
  991. Endpoint Descriptor:
  992. bLength 7
  993. bDescriptorType 5
  994. bEndpointAddress 0x81 EP 1 IN
  995. bmAttributes 3
  996. Transfer Type Interrupt
  997. Synch Type None
  998. Usage Type Data
  999. wMaxPacketSize 0x0004 1x 4 bytes
  1000. bInterval 12
  1001. bMaxBurst 0
  1002. Hub Descriptor:
  1003. bLength 12
  1004. bDescriptorType 42
  1005. nNbrPorts 1
  1006. wHubCharacteristic 0x0009
  1007. Per-port power switching
  1008. Per-port overcurrent protection
  1009. bPwrOn2PwrGood 10 * 2 milli seconds
  1010. bHubContrCurrent 0 milli Ampere
  1011. bHubDecLat 0.0 micro seconds
  1012. wHubDelay 0 nano seconds
  1013. DeviceRemovable 0x02
  1014. Hub Port Status:
  1015. Port 1: 0000.0088 5Gbps SS.disabled oc
  1016. Binary Object Store Descriptor:
  1017. bLength 5
  1018. bDescriptorType 15
  1019. wTotalLength 15
  1020. bNumDeviceCaps 1
  1021. SuperSpeed USB Device Capability:
  1022. bLength 10
  1023. bDescriptorType 16
  1024. bDevCapabilityType 3
  1025. bmAttributes 0x02
  1026. Latency Tolerance Messages (LTM) Supported
  1027. wSpeedsSupported 0x0008
  1028. Device can operate at SuperSpeed (5Gbps)
  1029. bFunctionalitySupport 3
  1030. Lowest fully-functional device speed is SuperSpeed (5Gbps)
  1031. bU1DevExitLat 0 micro seconds
  1032. bU2DevExitLat 0 micro seconds
  1033. Device Status: 0x0001
  1034. Self Powered
  1035.  
  1036. Bus 005 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
  1037. Device Descriptor:
  1038. bLength 18
  1039. bDescriptorType 1
  1040. bcdUSB 2.10
  1041. bDeviceClass 0 (Defined at Interface level)
  1042. bDeviceSubClass 0
  1043. bDeviceProtocol 0
  1044. bMaxPacketSize0 64
  1045. idVendor 0x0bda Realtek Semiconductor Corp.
  1046. idProduct 0x8153
  1047. bcdDevice 30.00
  1048. iManufacturer 1 Realtek
  1049. iProduct 2 USB 10/100/1000 LAN
  1050. iSerial 6 000001000000
  1051. bNumConfigurations 2
  1052. Configuration Descriptor:
  1053. bLength 9
  1054. bDescriptorType 2
  1055. wTotalLength 39
  1056. bNumInterfaces 1
  1057. bConfigurationValue 1
  1058. iConfiguration 0
  1059. bmAttributes 0xa0
  1060. (Bus Powered)
  1061. Remote Wakeup
  1062. MaxPower 180mA
  1063. Interface Descriptor:
  1064. bLength 9
  1065. bDescriptorType 4
  1066. bInterfaceNumber 0
  1067. bAlternateSetting 0
  1068. bNumEndpoints 3
  1069. bInterfaceClass 255 Vendor Specific Class
  1070. bInterfaceSubClass 255 Vendor Specific Subclass
  1071. bInterfaceProtocol 0
  1072. iInterface 0
  1073. Endpoint Descriptor:
  1074. bLength 7
  1075. bDescriptorType 5
  1076. bEndpointAddress 0x81 EP 1 IN
  1077. bmAttributes 2
  1078. Transfer Type Bulk
  1079. Synch Type None
  1080. Usage Type Data
  1081. wMaxPacketSize 0x0200 1x 512 bytes
  1082. bInterval 0
  1083. Endpoint Descriptor:
  1084. bLength 7
  1085. bDescriptorType 5
  1086. bEndpointAddress 0x02 EP 2 OUT
  1087. bmAttributes 2
  1088. Transfer Type Bulk
  1089. Synch Type None
  1090. Usage Type Data
  1091. wMaxPacketSize 0x0200 1x 512 bytes
  1092. bInterval 0
  1093. Endpoint Descriptor:
  1094. bLength 7
  1095. bDescriptorType 5
  1096. bEndpointAddress 0x83 EP 3 IN
  1097. bmAttributes 3
  1098. Transfer Type Interrupt
  1099. Synch Type None
  1100. Usage Type Data
  1101. wMaxPacketSize 0x0002 1x 2 bytes
  1102. bInterval 8
  1103. Configuration Descriptor:
  1104. bLength 9
  1105. bDescriptorType 2
  1106. wTotalLength 80
  1107. bNumInterfaces 2
  1108. bConfigurationValue 2
  1109. iConfiguration 0
  1110. bmAttributes 0xa0
  1111. (Bus Powered)
  1112. Remote Wakeup
  1113. MaxPower 180mA
  1114. Interface Descriptor:
  1115. bLength 9
  1116. bDescriptorType 4
  1117. bInterfaceNumber 0
  1118. bAlternateSetting 0
  1119. bNumEndpoints 1
  1120. bInterfaceClass 2 Communications
  1121. bInterfaceSubClass 6 Ethernet Networking
  1122. bInterfaceProtocol 0
  1123. iInterface 5 CDC Communications Control
  1124. CDC Header:
  1125. bcdCDC 1.10
  1126. CDC Union:
  1127. bMasterInterface 0
  1128. bSlaveInterface 1
  1129. CDC Ethernet:
  1130. iMacAddress 3 001E0631AB2A
  1131. bmEthernetStatistics 0x00000000
  1132. wMaxSegmentSize 1514
  1133. wNumberMCFilters 0x0000
  1134. bNumberPowerFilters 0
  1135. Endpoint Descriptor:
  1136. bLength 7
  1137. bDescriptorType 5
  1138. bEndpointAddress 0x83 EP 3 IN
  1139. bmAttributes 3
  1140. Transfer Type Interrupt
  1141. Synch Type None
  1142. Usage Type Data
  1143. wMaxPacketSize 0x0010 1x 16 bytes
  1144. bInterval 8
  1145. Interface Descriptor:
  1146. bLength 9
  1147. bDescriptorType 4
  1148. bInterfaceNumber 1
  1149. bAlternateSetting 0
  1150. bNumEndpoints 0
  1151. bInterfaceClass 10 CDC Data
  1152. bInterfaceSubClass 0 Unused
  1153. bInterfaceProtocol 0
  1154. iInterface 0
  1155. Interface Descriptor:
  1156. bLength 9
  1157. bDescriptorType 4
  1158. bInterfaceNumber 1
  1159. bAlternateSetting 1
  1160. bNumEndpoints 2
  1161. bInterfaceClass 10 CDC Data
  1162. bInterfaceSubClass 0 Unused
  1163. bInterfaceProtocol 0
  1164. iInterface 4 Ethernet Data
  1165. Endpoint Descriptor:
  1166. bLength 7
  1167. bDescriptorType 5
  1168. bEndpointAddress 0x81 EP 1 IN
  1169. bmAttributes 2
  1170. Transfer Type Bulk
  1171. Synch Type None
  1172. Usage Type Data
  1173. wMaxPacketSize 0x0200 1x 512 bytes
  1174. bInterval 0
  1175. Endpoint Descriptor:
  1176. bLength 7
  1177. bDescriptorType 5
  1178. bEndpointAddress 0x02 EP 2 OUT
  1179. bmAttributes 2
  1180. Transfer Type Bulk
  1181. Synch Type None
  1182. Usage Type Data
  1183. wMaxPacketSize 0x0200 1x 512 bytes
  1184. bInterval 0
  1185. Binary Object Store Descriptor:
  1186. bLength 5
  1187. bDescriptorType 15
  1188. wTotalLength 22
  1189. bNumDeviceCaps 2
  1190. USB 2.0 Extension Device Capability:
  1191. bLength 7
  1192. bDescriptorType 16
  1193. bDevCapabilityType 2
  1194. bmAttributes 0x00000002
  1195. Link Power Management (LPM) Supported
  1196. SuperSpeed USB Device Capability:
  1197. bLength 10
  1198. bDescriptorType 16
  1199. bDevCapabilityType 3
  1200. bmAttributes 0x02
  1201. Latency Tolerance Messages (LTM) Supported
  1202. wSpeedsSupported 0x000e
  1203. Device can operate at Full Speed (12Mbps)
  1204. Device can operate at High Speed (480Mbps)
  1205. Device can operate at SuperSpeed (5Gbps)
  1206. bFunctionalitySupport 2
  1207. Lowest fully-functional device speed is High Speed (480Mbps)
  1208. bU1DevExitLat 10 micro seconds
  1209. bU2DevExitLat 2047 micro seconds
  1210. Device Status: 0x0000
  1211. (Bus Powered)
  1212.  
  1213. Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1214. Device Descriptor:
  1215. bLength 18
  1216. bDescriptorType 1
  1217. bcdUSB 2.00
  1218. bDeviceClass 9 Hub
  1219. bDeviceSubClass 0 Unused
  1220. bDeviceProtocol 1 Single TT
  1221. bMaxPacketSize0 64
  1222. idVendor 0x1d6b Linux Foundation
  1223. idProduct 0x0002 2.0 root hub
  1224. bcdDevice 4.13
  1225. iManufacturer 3 Linux 4.13.0-xu4ml xhci-hcd
  1226. iProduct 2 xHCI Host Controller
  1227. iSerial 1 xhci-hcd.5.auto
  1228. bNumConfigurations 1
  1229. Configuration Descriptor:
  1230. bLength 9
  1231. bDescriptorType 2
  1232. wTotalLength 25
  1233. bNumInterfaces 1
  1234. bConfigurationValue 1
  1235. iConfiguration 0
  1236. bmAttributes 0xe0
  1237. Self Powered
  1238. Remote Wakeup
  1239. MaxPower 0mA
  1240. Interface Descriptor:
  1241. bLength 9
  1242. bDescriptorType 4
  1243. bInterfaceNumber 0
  1244. bAlternateSetting 0
  1245. bNumEndpoints 1
  1246. bInterfaceClass 9 Hub
  1247. bInterfaceSubClass 0 Unused
  1248. bInterfaceProtocol 0 Full speed (or root) hub
  1249. iInterface 0
  1250. Endpoint Descriptor:
  1251. bLength 7
  1252. bDescriptorType 5
  1253. bEndpointAddress 0x81 EP 1 IN
  1254. bmAttributes 3
  1255. Transfer Type Interrupt
  1256. Synch Type None
  1257. Usage Type Data
  1258. wMaxPacketSize 0x0004 1x 4 bytes
  1259. bInterval 12
  1260. Hub Descriptor:
  1261. bLength 9
  1262. bDescriptorType 41
  1263. nNbrPorts 1
  1264. wHubCharacteristic 0x0009
  1265. Per-port power switching
  1266. Per-port overcurrent protection
  1267. TT think time 8 FS bits
  1268. bPwrOn2PwrGood 10 * 2 milli seconds
  1269. bHubContrCurrent 0 milli Ampere
  1270. DeviceRemovable 0x02
  1271. PortPwrCtrlMask 0xff
  1272. Hub Port Status:
  1273. Port 1: 0000.0503 highspeed power enable connect
  1274. Device Status: 0x0001
  1275. Self Powered
  1276.  
  1277. Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  1278. Device Descriptor:
  1279. bLength 18
  1280. bDescriptorType 1
  1281. bcdUSB 3.00
  1282. bDeviceClass 9 Hub
  1283. bDeviceSubClass 0 Unused
  1284. bDeviceProtocol 3
  1285. bMaxPacketSize0 9
  1286. idVendor 0x1d6b Linux Foundation
  1287. idProduct 0x0003 3.0 root hub
  1288. bcdDevice 4.13
  1289. iManufacturer 3 Linux 4.13.0-xu4ml xhci-hcd
  1290. iProduct 2 xHCI Host Controller
  1291. iSerial 1 xhci-hcd.2.auto
  1292. bNumConfigurations 1
  1293. Configuration Descriptor:
  1294. bLength 9
  1295. bDescriptorType 2
  1296. wTotalLength 31
  1297. bNumInterfaces 1
  1298. bConfigurationValue 1
  1299. iConfiguration 0
  1300. bmAttributes 0xe0
  1301. Self Powered
  1302. Remote Wakeup
  1303. MaxPower 0mA
  1304. Interface Descriptor:
  1305. bLength 9
  1306. bDescriptorType 4
  1307. bInterfaceNumber 0
  1308. bAlternateSetting 0
  1309. bNumEndpoints 1
  1310. bInterfaceClass 9 Hub
  1311. bInterfaceSubClass 0 Unused
  1312. bInterfaceProtocol 0 Full speed (or root) hub
  1313. iInterface 0
  1314. Endpoint Descriptor:
  1315. bLength 7
  1316. bDescriptorType 5
  1317. bEndpointAddress 0x81 EP 1 IN
  1318. bmAttributes 3
  1319. Transfer Type Interrupt
  1320. Synch Type None
  1321. Usage Type Data
  1322. wMaxPacketSize 0x0004 1x 4 bytes
  1323. bInterval 12
  1324. bMaxBurst 0
  1325. Hub Descriptor:
  1326. bLength 12
  1327. bDescriptorType 42
  1328. nNbrPorts 1
  1329. wHubCharacteristic 0x0009
  1330. Per-port power switching
  1331. Per-port overcurrent protection
  1332. bPwrOn2PwrGood 10 * 2 milli seconds
  1333. bHubContrCurrent 0 milli Ampere
  1334. bHubDecLat 0.0 micro seconds
  1335. wHubDelay 0 nano seconds
  1336. DeviceRemovable 0x02
  1337. Hub Port Status:
  1338. Port 1: 0000.0088 5Gbps SS.disabled oc
  1339. Binary Object Store Descriptor:
  1340. bLength 5
  1341. bDescriptorType 15
  1342. wTotalLength 15
  1343. bNumDeviceCaps 1
  1344. SuperSpeed USB Device Capability:
  1345. bLength 10
  1346. bDescriptorType 16
  1347. bDevCapabilityType 3
  1348. bmAttributes 0x02
  1349. Latency Tolerance Messages (LTM) Supported
  1350. wSpeedsSupported 0x0008
  1351. Device can operate at SuperSpeed (5Gbps)
  1352. bFunctionalitySupport 3
  1353. Lowest fully-functional device speed is SuperSpeed (5Gbps)
  1354. bU1DevExitLat 0 micro seconds
  1355. bU2DevExitLat 0 micro seconds
  1356. Device Status: 0x0001
  1357. Self Powered
  1358.  
  1359. Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
  1360. Device Descriptor:
  1361. bLength 18
  1362. bDescriptorType 1
  1363. bcdUSB 2.00
  1364. bDeviceClass 9 Hub
  1365. bDeviceSubClass 0 Unused
  1366. bDeviceProtocol 2 TT per port
  1367. bMaxPacketSize0 64
  1368. idVendor 0x05e3 Genesys Logic, Inc.
  1369. idProduct 0x0610 4-port hub
  1370. bcdDevice 22.23
  1371. iManufacturer 1 GenesysLogic
  1372. iProduct 2 USB2.0 Hub
  1373. iSerial 0
  1374. bNumConfigurations 1
  1375. Configuration Descriptor:
  1376. bLength 9
  1377. bDescriptorType 2
  1378. wTotalLength 41
  1379. bNumInterfaces 1
  1380. bConfigurationValue 1
  1381. iConfiguration 0
  1382. bmAttributes 0xe0
  1383. Self Powered
  1384. Remote Wakeup
  1385. MaxPower 100mA
  1386. Interface Descriptor:
  1387. bLength 9
  1388. bDescriptorType 4
  1389. bInterfaceNumber 0
  1390. bAlternateSetting 0
  1391. bNumEndpoints 1
  1392. bInterfaceClass 9 Hub
  1393. bInterfaceSubClass 0 Unused
  1394. bInterfaceProtocol 1 Single TT
  1395. iInterface 0
  1396. Endpoint Descriptor:
  1397. bLength 7
  1398. bDescriptorType 5
  1399. bEndpointAddress 0x81 EP 1 IN
  1400. bmAttributes 3
  1401. Transfer Type Interrupt
  1402. Synch Type None
  1403. Usage Type Data
  1404. wMaxPacketSize 0x0001 1x 1 bytes
  1405. bInterval 12
  1406. Interface Descriptor:
  1407. bLength 9
  1408. bDescriptorType 4
  1409. bInterfaceNumber 0
  1410. bAlternateSetting 1
  1411. bNumEndpoints 1
  1412. bInterfaceClass 9 Hub
  1413. bInterfaceSubClass 0 Unused
  1414. bInterfaceProtocol 2 TT per port
  1415. iInterface 0
  1416. Endpoint Descriptor:
  1417. bLength 7
  1418. bDescriptorType 5
  1419. bEndpointAddress 0x81 EP 1 IN
  1420. bmAttributes 3
  1421. Transfer Type Interrupt
  1422. Synch Type None
  1423. Usage Type Data
  1424. wMaxPacketSize 0x0001 1x 1 bytes
  1425. bInterval 12
  1426. Hub Descriptor:
  1427. bLength 9
  1428. bDescriptorType 41
  1429. nNbrPorts 2
  1430. wHubCharacteristic 0x00e9
  1431. Per-port power switching
  1432. Per-port overcurrent protection
  1433. TT think time 32 FS bits
  1434. Port indicators
  1435. bPwrOn2PwrGood 50 * 2 milli seconds
  1436. bHubContrCurrent 100 milli Ampere
  1437. DeviceRemovable 0x00
  1438. PortPwrCtrlMask 0xff
  1439. Hub Port Status:
  1440. Port 1: 0000.0100 power
  1441. Port 2: 0000.0100 power
  1442. Device Qualifier (for other device speed):
  1443. bLength 10
  1444. bDescriptorType 6
  1445. bcdUSB 2.00
  1446. bDeviceClass 9 Hub
  1447. bDeviceSubClass 0 Unused
  1448. bDeviceProtocol 0 Full speed (or root) hub
  1449. bMaxPacketSize0 64
  1450. bNumConfigurations 1
  1451. Device Status: 0x0001
  1452. Self Powered
  1453.  
  1454. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1455. Device Descriptor:
  1456. bLength 18
  1457. bDescriptorType 1
  1458. bcdUSB 2.00
  1459. bDeviceClass 9 Hub
  1460. bDeviceSubClass 0 Unused
  1461. bDeviceProtocol 1 Single TT
  1462. bMaxPacketSize0 64
  1463. idVendor 0x1d6b Linux Foundation
  1464. idProduct 0x0002 2.0 root hub
  1465. bcdDevice 4.13
  1466. iManufacturer 3 Linux 4.13.0-xu4ml xhci-hcd
  1467. iProduct 2 xHCI Host Controller
  1468. iSerial 1 xhci-hcd.2.auto
  1469. bNumConfigurations 1
  1470. Configuration Descriptor:
  1471. bLength 9
  1472. bDescriptorType 2
  1473. wTotalLength 25
  1474. bNumInterfaces 1
  1475. bConfigurationValue 1
  1476. iConfiguration 0
  1477. bmAttributes 0xe0
  1478. Self Powered
  1479. Remote Wakeup
  1480. MaxPower 0mA
  1481. Interface Descriptor:
  1482. bLength 9
  1483. bDescriptorType 4
  1484. bInterfaceNumber 0
  1485. bAlternateSetting 0
  1486. bNumEndpoints 1
  1487. bInterfaceClass 9 Hub
  1488. bInterfaceSubClass 0 Unused
  1489. bInterfaceProtocol 0 Full speed (or root) hub
  1490. iInterface 0
  1491. Endpoint Descriptor:
  1492. bLength 7
  1493. bDescriptorType 5
  1494. bEndpointAddress 0x81 EP 1 IN
  1495. bmAttributes 3
  1496. Transfer Type Interrupt
  1497. Synch Type None
  1498. Usage Type Data
  1499. wMaxPacketSize 0x0004 1x 4 bytes
  1500. bInterval 12
  1501. Hub Descriptor:
  1502. bLength 9
  1503. bDescriptorType 41
  1504. nNbrPorts 1
  1505. wHubCharacteristic 0x0009
  1506. Per-port power switching
  1507. Per-port overcurrent protection
  1508. TT think time 8 FS bits
  1509. bPwrOn2PwrGood 10 * 2 milli seconds
  1510. bHubContrCurrent 0 milli Ampere
  1511. DeviceRemovable 0x02
  1512. PortPwrCtrlMask 0xff
  1513. Hub Port Status:
  1514. Port 1: 0000.0507 highspeed power suspend enable connect
  1515. Device Status: 0x0001
  1516. Self Powered
  1517.  
  1518. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  1519. Device Descriptor:
  1520. bLength 18
  1521. bDescriptorType 1
  1522. bcdUSB 1.10
  1523. bDeviceClass 9 Hub
  1524. bDeviceSubClass 0 Unused
  1525. bDeviceProtocol 0 Full speed (or root) hub
  1526. bMaxPacketSize0 64
  1527. idVendor 0x1d6b Linux Foundation
  1528. idProduct 0x0001 1.1 root hub
  1529. bcdDevice 4.13
  1530. iManufacturer 3 Linux 4.13.0-xu4ml ohci_hcd
  1531. iProduct 2 USB Host Controller
  1532. iSerial 1 12120000.usb
  1533. bNumConfigurations 1
  1534. Configuration Descriptor:
  1535. bLength 9
  1536. bDescriptorType 2
  1537. wTotalLength 25
  1538. bNumInterfaces 1
  1539. bConfigurationValue 1
  1540. iConfiguration 0
  1541. bmAttributes 0xe0
  1542. Self Powered
  1543. Remote Wakeup
  1544. MaxPower 0mA
  1545. Interface Descriptor:
  1546. bLength 9
  1547. bDescriptorType 4
  1548. bInterfaceNumber 0
  1549. bAlternateSetting 0
  1550. bNumEndpoints 1
  1551. bInterfaceClass 9 Hub
  1552. bInterfaceSubClass 0 Unused
  1553. bInterfaceProtocol 0 Full speed (or root) hub
  1554. iInterface 0
  1555. Endpoint Descriptor:
  1556. bLength 7
  1557. bDescriptorType 5
  1558. bEndpointAddress 0x81 EP 1 IN
  1559. bmAttributes 3
  1560. Transfer Type Interrupt
  1561. Synch Type None
  1562. Usage Type Data
  1563. wMaxPacketSize 0x0002 1x 2 bytes
  1564. bInterval 255
  1565. Hub Descriptor:
  1566. bLength 9
  1567. bDescriptorType 41
  1568. nNbrPorts 3
  1569. wHubCharacteristic 0x0002
  1570. No power switching (usb 1.0)
  1571. Ganged overcurrent protection
  1572. bPwrOn2PwrGood 2 * 2 milli seconds
  1573. bHubContrCurrent 0 milli Ampere
  1574. DeviceRemovable 0x00
  1575. PortPwrCtrlMask 0xff
  1576. Hub Port Status:
  1577. Port 1: 0000.0100 power
  1578. Port 2: 0000.0100 power
  1579. Port 3: 0000.0100 power
  1580. Device Status: 0x0001
  1581. Self Powered
  1582.  
  1583. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1584. Device Descriptor:
  1585. bLength 18
  1586. bDescriptorType 1
  1587. bcdUSB 2.00
  1588. bDeviceClass 9 Hub
  1589. bDeviceSubClass 0 Unused
  1590. bDeviceProtocol 0 Full speed (or root) hub
  1591. bMaxPacketSize0 64
  1592. idVendor 0x1d6b Linux Foundation
  1593. idProduct 0x0002 2.0 root hub
  1594. bcdDevice 4.13
  1595. iManufacturer 3 Linux 4.13.0-xu4ml ehci_hcd
  1596. iProduct 2 EHCI Host Controller
  1597. iSerial 1 12110000.usb
  1598. bNumConfigurations 1
  1599. Configuration Descriptor:
  1600. bLength 9
  1601. bDescriptorType 2
  1602. wTotalLength 25
  1603. bNumInterfaces 1
  1604. bConfigurationValue 1
  1605. iConfiguration 0
  1606. bmAttributes 0xe0
  1607. Self Powered
  1608. Remote Wakeup
  1609. MaxPower 0mA
  1610. Interface Descriptor:
  1611. bLength 9
  1612. bDescriptorType 4
  1613. bInterfaceNumber 0
  1614. bAlternateSetting 0
  1615. bNumEndpoints 1
  1616. bInterfaceClass 9 Hub
  1617. bInterfaceSubClass 0 Unused
  1618. bInterfaceProtocol 0 Full speed (or root) hub
  1619. iInterface 0
  1620. Endpoint Descriptor:
  1621. bLength 7
  1622. bDescriptorType 5
  1623. bEndpointAddress 0x81 EP 1 IN
  1624. bmAttributes 3
  1625. Transfer Type Interrupt
  1626. Synch Type None
  1627. Usage Type Data
  1628. wMaxPacketSize 0x0004 1x 4 bytes
  1629. bInterval 12
  1630. Hub Descriptor:
  1631. bLength 9
  1632. bDescriptorType 41
  1633. nNbrPorts 3
  1634. wHubCharacteristic 0x0009
  1635. Per-port power switching
  1636. Per-port overcurrent protection
  1637. bPwrOn2PwrGood 10 * 2 milli seconds
  1638. bHubContrCurrent 0 milli Ampere
  1639. DeviceRemovable 0x00
  1640. PortPwrCtrlMask 0xff
  1641. Hub Port Status:
  1642. Port 1: 0000.0100 power
  1643. Port 2: 0000.0100 power
  1644. Port 3: 0000.0100 power
  1645. Device Status: 0x0001
  1646. Self Powered
  1647. root@odroid:~#
RAW Paste Data