Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
Reading boot sector
Error: reading boot sector
Loading u-boot.bin from nand


U-Boot 2011.09-dirty (Oct 16 2011 - 09:39:15)

OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev Ax/Bx
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #5ac400030000000004013f8901001001
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
reading uImage

3124584 bytes read
reading rd-ext2.bin

** Unable to read "rd-ext2.bin" from mmc 0:1 **
## Booting kernel from Legacy Image at 80300000 ...
   Image Name:   Angstrom/3.0/omap3-multi
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3124520 Bytes = 3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

.---O---.
|       |                  .-.           o o
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution omap3-multi ttyO2

Angstrom v2011.12 omap3-multi ttyO2

omap3-multi login: root
Password:
root@omap3-multi:~# ls




**************************************************************************

OMAP3 beagleboard.org # printenv
bootargs=console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext2 rw rootdelay=1 nohz=off
dvimode=1024x768MR-16@60
baudrate=115200
beaglerev=AxBx
bootargs=console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=1 nohz=off debug
bootcmd=mmc rescan;fatload mmc 0 0x80300000 uImage;fatload mmc 0 0x81600000 rd-ext2.bin;bootm 0x80300000
bootdelay=2
bootenv=uEnv.txt
bootfile=uImage.beagle
buddy=unknown
buddy2=unknown
camera=none
console=ttyO2,115200n8
defaultdisplay=dvi
dieid#=5ac400030000000004013f8901001001
dvimode=640x480MR-16@60
filesize=310740
importbootenv=echo Importing environment from mmc ...; env import -t $loadaddr $filesize
loadaddr=0x80200000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}
loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz
loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage
loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage
mmcargs=setenv bootargs console=${console} ${optargs} mpurate=${mpurate} buddy=${buddy} buddy2=${buddy2} camera=${camera} vram=${vram} omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay} root=${mmcroot} rootfstype=${mmcrootfstype}
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
mmcdev=0
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext3 rootwait
mpurate=auto
mtdids=nand0=nand
nandargs=setenv bootargs console=${console} ${optargs} mpurate=${mpurate} buddy=${buddy} camera=${camera} vram=${vram} omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay} root=${nandroot} rootfstype=${nandrootfstype}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 280000 400000; bootm ${loadaddr}
nandroot=/dev/mtdblock4 rw
nandrootfstype=jffs2
ramargs=setenv bootargs console=${console} ${optargs} mpurate=${mpurate} buddy=${buddy} vram=${vram} omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay} root=${ramroot} rootfstype=${ramrootfstype}
ramboot=echo Booting from ramdisk ...; run ramargs; bootm ${loadaddr}
ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M
ramrootfstype=ext2
rdaddr=0x81000000
usbtty=cdc_acm
vram=12M

Environment size: 2201/131068 bytes
OMAP3 beagleboard.org #