API tools faq
paste
Advertisement
fEsTiDiOuS

Alfa AP120C-AP v2.0-r2768 Serial Console Output

fEsTiDiOuS
Nov 28th, 2021
47
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.22 KB | None | 0 0
raw download clone embed print report
  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117
  4. S - IMAGE_VARIANT_STRING=DAABANAZA
  5. S - OEM_IMAGE_VERSION_STRING=CRM
  6. S - Boot Config, 0x00000020
  7. S - Reset status Config, 0x00000000
  8. S - Core 0 Frequency, 0 MHz
  9. B - 261 - PBL, Start
  10. B - 1338 - bootable_media_detect_entry, Start
  11. B - 1678 - bootable_media_detect_success, Start
  12. B - 1692 - elf_loader_entry, Start
  13. B - 5069 - auth_hash_seg_entry, Start
  14. B - 7212 - auth_hash_seg_exit, Start
  15. B - 578931 - elf_segs_hash_verify_entry, Start
  16. B - 696887 - PBL, End
  17. B - 696911 - SBL1, Start
  18. B - 787640 - pm_device_init, Start
  19. D - 7 - pm_device_init, Delta
  20. B - 789165 - boot_flash_init, Start
  21. D - 54253 - boot_flash_init, Delta
  22. B - 847564 - boot_config_data_table_init, Start
  23. D - 3838 - boot_config_data_table_init, Delta - (419 Bytes)
  24. B - 854778 - clock_init, Start
  25. D - 7563 - clock_init, Delta
  26. B - 866844 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:16
  27. B - 870372 - sbl1_ddr_set_params, Start
  28. B - 875361 - cpr_init, Start
  29. D - 2 - cpr_init, Delta
  30. B - 879801 - Pre_DDR_clock_init, Start
  31. D - 5 - Pre_DDR_clock_init, Delta
  32. D - 13234 - sbl1_ddr_set_params, Delta
  33. B - 893535 - pm_driver_init, Start
  34. D - 2 - pm_driver_init, Delta
  35. B - 963818 - sbl1_wait_for_ddr_training, Start
  36. D - 28 - sbl1_wait_for_ddr_training, Delta
  37. B - 979295 - Image Load, Start
  38. D - 140815 - QSEE Image Loaded, Delta - (274048 Bytes)
  39. B - 1120535 - Image Load, Start
  40. D - 1441 - SEC Image Loaded, Delta - (2048 Bytes)
  41. B - 1130941 - Image Load, Start
  42. D - 217085 - APPSBL Image Loaded, Delta - (444151 Bytes)
  43. B - 1348422 - QSEE Execution, Start
  44. D - 60 - QSEE Execution, Delta
  45. B - 1354631 - SBL1, End
  46. D - 659796 - SBL1, Delta
  47. S - Flash Throughput, 2006 KB/s (720666 Bytes, 359155 us)
  48. S - DDR Frequency, 537 MHz
  49.  
  50.  
  51. U-Boot 2012.07 [ALFA Network Inc. SmartBS v2.0dk,r2767] (Nov 30 2020 - 17:28:54)
  52.  
  53. smem ram ptable found: ver: 1 len: 3
  54. DRAM: 256 MiB
  55. NAND: spi_nand SF NAND ID 00:c2:12:c2
  56. FLASH: 144 MiB
  57. machid: 9000010
  58. FlashType: 0
  59. eth0: 00:c0:ca:a5:f7:c3
  60. eth1: 00:c0:ca:a5:f7:c4
  61. wifi0: 00:c0:ca:a5:f7:c5
  62. wifi1: 00:c0:ca:a5:f7:c6
  63. bt: ff:ff:ff:ff:ff:ff
  64.  
  65. Net:
  66. MAC0 addr:00:C0:CA:A5:F7:C3
  67. PHY ID1: 0x4d
  68. PHY ID2: 0xd0b1
  69. eth0
  70. Hit any key to stop booting: 2 1 0
  71. Creating 1 MTD partitions on "nand1":
  72. 0x000004000000-0x000008000000 : "mtd=1"
  73. UBI: attaching mtd2 to ubi0
  74. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  75. UBI: logical eraseblock size: 126976 bytes
  76. UBI: smallest flash I/O unit: 2048
  77. UBI: VID header offset: 2048 (aligned 2048)
  78. UBI: data offset: 4096
  79. UBI: attached mtd2 to ubi0
  80. UBI: MTD device name: "mtd=1"
  81. UBI: MTD device size: 64 MiB
  82. UBI: number of good PEBs: 512
  83. UBI: number of bad PEBs: 0
  84. UBI: max. allowed volumes: 128
  85. UBI: wear-leveling threshold: 4096
  86. UBI: number of internal volumes: 1
  87. UBI: number of user volumes: 3
  88. UBI: available PEBs: 0
  89. UBI: total number of reserved PEBs: 512
  90. UBI: number of PEBs reserved for bad PEB handling: 20
  91. UBI: max/mean erase counter: 8/4
  92. Read 0 bytes from volume kernel to 84000000
  93. No size specified -> Using max size (3428352)
  94. ## Booting kernel from FIT Image at 84000000 ...
  95. Using 'config@1' configuration
  96. Trying 'kernel@1' kernel subimage
  97. Description: ARM OpenWrt Linux-3.14.77
  98. Type: Kernel Image
  99. Compression: gzip compressed
  100. Data Start: 0x840000e4
  101. Data Size: 3331249 Bytes = 3.2 MiB
  102. Architecture: ARM
  103. OS: Linux
  104. Load Address: 0x80208000
  105. Entry Point: 0x80208000
  106. Hash algo: crc32
  107. Hash value: 64efb39b
  108. Hash algo: sha1
  109. Hash value: 80f412d32028529ba7ba48f37810824f8400d87a
  110. Verifying Hash Integrity ... OK
  111. ## Flattened Device Tree from FIT Image at 84000000
  112. Using 'config@1' configuration
  113. Trying 'fdt@1' FDT blob subimage
  114. Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
  115. Type: Flat Device Tree
  116. Compression: uncompressed
  117. Data Start: 0x8432d6d8
  118. Data Size: 34731 Bytes = 33.9 KiB
  119. Architecture: ARM
  120. Hash algo: crc32
  121. Hash value: d948cab7
  122. Hash algo: sha1
  123. Hash value: 2269897858c18de7a1d12a274c371e2ebc682e81
  124. Verifying Hash Integrity ... OK
  125. Booting using the fdt blob at 0x8432d6d8
  126. Uncompressing Kernel Image ... OK
  127. Loading Device Tree to 86ff4000, end 86fff7aa ... OK
  128. Using machid 0x9000010 from environment
  129. Enable QCOM Watchdog
  130.  
  131. Starting kernel ...
  132.  
  133. [ 0.000000] Booting Linux on physical CPU 0x0
  134. [ 0.000000] Linux version 3.14.77 (minglin@localhost) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r2740) ) #63 SMP PREEMPT Wed Dec 2 15:18:31 CST 2020
  135. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  136. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  137. [ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP120C-AC
  138. [ 0.000000] Memory policy: Data cache writealloc
  139. [ 0.000000] PERCPU: Embedded 7 pages/cpu @cfdca000 s7936 r8192 d12544 u32768
  140. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60928
  141. [ 0.000000] Kernel command line: ubi.mtd=rootfs2 rootwait clk_ignore_unused
  142. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  143. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  144. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  145. [ 0.000000] Memory: 235932K/245760K available (4601K kernel code, 377K rwdata, 1568K rodata, 171K init, 603K bss, 9828K reserved, 0K highmem)
  146. [ 0.000000] Virtual kernel memory layout:
  147. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  148. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  149. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  150. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  151. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  152. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  153. [ 0.000000] .text : 0xc0208000 - 0xc080e9f0 (6171 kB)
  154. [ 0.000000] .init : 0xc080f000 - 0xc0839f00 ( 172 kB)
  155. [ 0.000000] .data : 0xc083a000 - 0xc08987c8 ( 378 kB)
  156. [ 0.000000] .bss : 0xc08987c8 - 0xc092f5d0 ( 604 kB)
  157. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  158. [ 0.000000] Preemptible hierarchical RCU implementation.
  159. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  160. [ 0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
  161. [ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
  162. [ 0.000017] Switching to timer-based delay loop
  163. [ 0.000301] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
  164. [ 0.000318] pid_max: default: 32768 minimum: 301
  165. [ 0.000590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  166. [ 0.000604] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  167. [ 0.011034] CPU: Testing write buffer coherency: ok
  168. [ 0.011418] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  169. [ 0.011492] Setting up static identity map for 0x802120b0 - 0x80212108
  170. [ 0.090625] CPU1: Booted secondary processor
  171. [ 0.090672] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  172. [ 0.110616] CPU2: Booted secondary processor
  173. [ 0.110650] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  174. [ 0.130677] CPU3: Booted secondary processor
  175. [ 0.130713] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  176. [ 0.130846] Brought up 4 CPUs
  177. [ 0.130886] SMP: Total of 4 processors activated (384.00 BogoMIPS).
  178. [ 0.130894] CPU: All CPU(s) started in SVC mode.
  179. [ 0.141173] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  180. [ 0.141529] pinctrl core: initialized pinctrl subsystem
  181. [ 0.141970] regulator-dummy: no parameters
  182. [ 0.142661] NET: Registered protocol family 16
  183. [ 0.144191] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  184. [ 0.144749] cpuidle: using governor ladder
  185. [ 0.144762] cpuidle: using governor menu
  186. [ 0.152806] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  187. [ 0.152814] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
  188. [ 0.152820] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
  189. [ 0.152825] hw-breakpoint: CPU 2 failed to disable vector catch
  190. [ 0.152855] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  191. [ 0.152943]
  192. [ 0.152943] Version Rollback Feature Disabled
  193. [ 0.156418] sps:sps is ready.
  194. [ 0.161239] bio: create slab <bio-0> at 0
  195. [ 0.163082] SCSI subsystem initialized
  196. [ 0.163769] msm_bus_fabric_init_driver
  197. [ 0.163958] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  198. [ 0.163975] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  199. [ 0.163994] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
  200. [ 0.164038] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  201. [ 0.164053] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  202. [ 0.164070] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
  203. [ 0.189029] Advanced Linux Sound Architecture Driver Initialized.
  204. [ 0.189997] Switched to clocksource arch_sys_counter
  205. [ 0.191817] NET: Registered protocol family 2
  206. [ 0.193116] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  207. [ 0.193166] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  208. [ 0.193215] TCP: Hash tables configured (established 2048 bind 2048)
  209. [ 0.193272] TCP: reno registered
  210. [ 0.193290] UDP hash table entries: 256 (order: 1, 8192 bytes)
  211. [ 0.193323] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  212. [ 0.193684] NET: Registered protocol family 1
  213. [ 0.194373] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  214. [ 0.195704] futex hash table entries: 1024 (order: 4, 65536 bytes)
  215. [ 0.205138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  216. [ 0.205155] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  217. [ 0.206081] msgmni has been set to 460
  218. [ 0.207472] Key type asymmetric registered
  219. [ 0.207486] Asymmetric key parser 'x509' registered
  220. [ 0.207523] io scheduler noop registered
  221. [ 0.207533] io scheduler deadline registered (default)
  222. [ 0.208764] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
  223. [ 0.208831] tcsr 1953000.ess_tcsr: setting ess interface select = 0
  224. [ 0.208899] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
  225. [ 0.208955] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
  226. [ 0.209610] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  227. [ 0.210779] msm_serial_hsl_probe: detected port #0 (ttyMSM0)
  228. [ 0.210817] msm_serial_hsl_probe: Bus scaling is disabled
  229. [ 0.210996] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
  230. [ 0.211070] msm_hsl_console_setup: console setup on port #0
  231. [ 0.798950] console [ttyMSM0] enabled
  232. [ 0.803051] msm_serial_hsl_init: driver initialized
  233. [ 0.807867] msm_serial_hs module loaded
  234. [ 0.811669] qca_serial_hs module loaded
  235. [ 0.817609] sps: BAM device 0x07884000 is not registered yet.
  236. [ 0.822376] sps:BAM 0x07884000 is registered.
  237. [ 0.827772] sps:BAM 0x07884000 (va:0xd0b40000) enabled: ver:0x19, number of pipes:12
  238. [ 0.834943] m25p80 spi0.0: found mx25l12805d, expected n25q128a11
  239. [ 0.840762] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  240. [ 0.845809] 10 ofpart partitions found on MTD device spi0.0
  241. [ 0.851333] Creating 10 MTD partitions on "spi0.0":
  242. [ 0.856182] 0x000000000000-0x000000040000 : "0:SBL1"
  243. [ 0.862311] 0x000000040000-0x000000060000 : "0:MIBIB"
  244. [ 0.867365] 0x000000060000-0x0000000c0000 : "0:QSEE"
  245. [ 0.872407] 0x0000000c0000-0x0000000d0000 : "0:CDT"
  246. [ 0.877190] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
  247. [ 0.882600] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
  248. [ 0.887966] 0x0000000f0000-0x000000170000 : "0:APPSBL"
  249. [ 0.893134] 0x000000170000-0x000000180000 : "0:ART"
  250. [ 0.897982] 0x000000180000-0x000000190000 : "PDATA1"
  251. [ 0.902882] 0x000000190000-0x0000001a0000 : "PDATA2"
  252. [ 0.919584] libphy: ipq40xx_mdio: probed
  253. [ 0.926048] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
  254. [ 0.931710] i2c /dev entries driver
  255. [ 0.937049] sdhci: Secure Digital Host Controller Interface driver
  256. [ 0.942224] sdhci: Copyright(c) Pierre Ossman
  257. [ 0.946535] sdhci-pltfm: SDHCI platform and OF driver helper
  258. [ 0.957678] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0x12
  259. [ 0.963029] nand: Macronix MX35LFxGE4AB 128MiB 3.3V
  260. [ 0.967864] nand: 128MiB, SLC, page size: 2048, OOB size: 64
  261. [ 0.973532] Scanning device for bad blocks
  262. [ 1.687257] random: nonblocking pool is initialized
  263. [ 2.920894] 2 ofpart partitions found on MTD device spi0.1
  264. [ 2.925345] Creating 2 MTD partitions on "spi0.1":
  265. [ 2.930167] 0x000000000000-0x000004000000 : "rootfs1"
  266. [ 2.936295] 0x000004000000-0x000008000000 : "rootfs2"
  267. [ 2.944217] TCP: cubic registered
  268. [ 2.947159] NET: Registered protocol family 10
  269. [ 2.952067] NET: Registered protocol family 17
  270. [ 2.955582] Bridge firewalling registered
  271. [ 2.959479] 8021q: 802.1Q VLAN Support v1.8
  272. [ 2.963782] Registering SWP/SWPB emulation handler
  273. [ 2.969469] regulator-dummy: disabling
  274. [ 2.972694] UBI: attaching mtd11 to ubi0
  275. [ 6.261909] UBI: scanning is finished
  276. [ 6.337702] UBI: attached mtd11 (name "rootfs2", size 64 MiB) to ubi0
  277. [ 6.343149] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  278. [ 6.349883] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  279. [ 6.356583] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  280. [ 6.363439] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0
  281. [ 6.369328] UBI: user volume: 3, internal volumes: 1, max. volumes count: 128
  282. [ 6.376463] UBI: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 2086974521
  283. [ 6.385488] UBI: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20
  284. [ 6.394626] UBI: background thread "ubi_bgt0d" started, PID 71
  285. [ 6.396476] mtd: device 13 (ubi_rootfs) set to be root filesystem
  286. [ 6.397372] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  287. [ 6.401045] clk: Not disabling unused clocks
  288. [ 6.401049] ALSA device list:
  289. [ 6.401052] No soundcards found.
  290. [ 6.440104] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
  291. [ 6.446650] Freeing unused kernel memory: 168K (c080f000 - c0839000)
  292. [ 8.575463] init: Console is alive
  293. [ 8.578077] init: - watchdog -
  294. [ 14.592704] usbcore: registered new interface driver usbfs
  295. [ 14.597237] usbcore: registered new interface driver hub
  296. [ 14.602740] usbcore: registered new device driver usb
  297. [ 14.609715] Button Hotplug driver version 0.4.1
  298. [ 14.615356] exFAT: Version 1.2.9
  299. [ 14.622821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  300. [ 14.629088] ehci-platform: EHCI generic platform driver
  301. [ 14.635325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  302. [ 14.641358] ohci-platform: OHCI generic platform driver
  303. [ 14.647200] uhci_hcd: USB Universal Host Controller Interface driver
  304. [ 14.661907] usbcore: registered new interface driver usb-storage
  305. [ 14.671606] init: - preinit -
  306. Press the [f] key and hit [enter] to enter failsafe mode
  307. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  308. Before mount_root
  309. [ 17.568635] UBIFS: background thread "ubifs_bgt0_2" started, PID 112
  310. [ 18.056523] UBIFS: recovery needed
  311. [ 19.151398] UBIFS: recovery completed
  312. [ 19.154161] UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  313. [ 19.160488] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  314. [ 19.169574] UBIFS: FS size: 40124416 bytes (38 MiB, 316 LEBs), journal size 2031616 bytes (1 MiB, 16 LEBs)
  315. [ 19.179225] UBIFS: reserved for root: 1895174 bytes (1850 KiB)
  316. [ 19.185042] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9B79B866-FFD9-4845-926E-52729BD420A1, small LPT model
  317. [ 19.210134] mount_root: switching to jffs2 overlay
  318. After mount_root
  319. 377+0 records in
  320. 377+0 records out
  321. 12064 bytes (11.8KB) copied, 0.072839 seconds, 161.7KB/s
  322. 377+0 records in
  323. 377+0 records out
  324. 12064 bytes (11.8KB) copied, 0.062592 seconds, 188.2KB/s
  325. [ 19.437113] procd: - early -
  326. [ 19.439131] procd: - watchdog -
  327. [ 20.248047] procd: - watchdog -
  328. [ 20.250546] procd: - ubus -
  329. [ 20.472674] procd: - init -
  330. Please press Enter to activate this console.
  331. [ 24.656256] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  332. [ 24.774349] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  333. [ 24.780668] qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000
  334. [ 24.788035] qcrypto 8e20000.qcrypto: CE device = 0x0
  335. [ 24.788035] , IO base, CE = 0xd1200000
  336. [ 24.788035] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  337. [ 24.788035] IO base BAM = 0x (null)
  338. [ 24.788035] BAM IRQ 239
  339. [ 24.788035] Engines Availability = 0x2010453
  340. [ 24.812650] sps:BAM 0x08e04000 is registered.
  341. [ 24.817777] sps:BAM 0x08e04000 (va:0xd1240000) enabled: ver:0x27, number of pipes:4
  342. [ 24.825631] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 239
  343. [ 24.832609] bus_scale_table is NULL
  344. [ 24.835949] qcrypto 8e20000.qcrypto: qcrypto-ecb-aes
  345. [ 24.840856] qcrypto 8e20000.qcrypto: qcrypto-cbc-aes
  346. [ 24.845747] qcrypto 8e20000.qcrypto: qcrypto-ctr-aes
  347. [ 24.850725] qcrypto 8e20000.qcrypto: qcrypto-ecb-des
  348. [ 24.855646] qcrypto 8e20000.qcrypto: qcrypto-cbc-des
  349. [ 24.860640] qcrypto 8e20000.qcrypto: qcrypto-ecb-3des
  350. [ 24.865640] qcrypto 8e20000.qcrypto: qcrypto-cbc-3des
  351. [ 24.870715] qcrypto 8e20000.qcrypto: qcrypto-xts-aes
  352. [ 24.875615] qcrypto 8e20000.qcrypto: qcrypto-sha1
  353. [ 24.880340] qcrypto 8e20000.qcrypto: qcrypto-sha256
  354. [ 24.885181] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  355. [ 24.891520] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  356. [ 24.897691] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  357. [ 24.904137] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  358. [ 24.910518] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  359. [ 24.916982] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  360. [ 24.923452] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha1
  361. [ 24.928565] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha256
  362. [ 24.933842] qcrypto 8e20000.qcrypto: qcrypto-aes-ccm
  363. [ 24.938736] qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm
  364. [ 24.944266] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  365. [ 24.971857] nf_conntrack version 0.5.0 (3689 buckets, 14756 max)
  366. [ 24.981453] NTFS driver 2.1.30 [Flags: R/O MODULE].
  367. [ 24.992517] Initializing XFRM netlink socket
  368. [ 24.997137] NET: Registered protocol family 15
  369. [ 25.003430] PPP generic driver version 2.4.2
  370. [ 26.169101] ess-switch DT exist!
  371. [ 26.171360] switchreg_base_addr: 0xc000000
  372. [ 26.175380] switchreg_size: 0x80000
  373. [ 26.178851] switch_access_mode: local bus
  374. [ 26.182870] mac mode = 0x0
  375. [ 26.185536] mac mode1 doesn't exit!
  376. [ 26.189008] mac mode2 doesn't exit!
  377. [ 26.192528] ess-uniphy DT doesn't exist!
  378. [ 26.196391] wan bmp:0x20
  379. [ 26.198919] ess-psgmii DT exist!
  380. [ 26.202144] current dts led_source_num is 0
  381. [ 26.206300] mdio DT exist!
  382. [ 26.208978] ssdk_plat_init start
  383. [ 26.212414] enable ess clk
  384. [ 26.325200] reset ok in probe!
  385. [ 26.327775] PHY ID is 0x4dd0b1
  386. [ 26.390211] qca probe malibu phy driver succeeded!
  387. [ 28.201397] Chip version 0x1401
  388. [ 28.203522] qca-ssdk module init succeeded!
  389. [ 28.217145] tun: Universal TUN/TAP device driver, 1.6
  390. [ 28.221202] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  391. [ 28.233226] **********************************************************
  392. [ 28.238724] * Driver :NSS GMAC Driver for RTL v(3.72a)
  393. [ 28.244143] * Version :1.0
  394. [ 28.246970] * Copyright :Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
  395. [ 28.255342] **********************************************************
  396. [ 28.278680] l2tp_core: L2TP core driver, V2.0
  397. [ 28.283111] l2tp_netlink: L2TP netlink interface
  398. [ 28.300615] qca-nss-drv.ko is loaded for symbol link
  399. [ 28.306360] sit: IPv6 over IPv4 tunneling driver
  400. [ 28.312639] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
  401. [ 28.320638] gre: GRE over IPv4 demultiplexor driver
  402. [ 28.325700] ip_gre: GRE over IPv4 tunneling driver
  403. [ 28.335144] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  404. [ 28.344000] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  405. [ 28.348250] QCA multicast snooping installed successfully
  406. [ 28.351839] ip6_tables: (C) 2000-2006 Netfilter Core Team
  407. [ 28.451830] nss_lag_init[345]:LAG Manager Installed
  408. [ 28.458270] NET: Registered protocol family 24
  409. [ 28.463307] PPTP driver version 0.8.5
  410. [ 28.470280] <NSS-CRYPTO>:module loaded (platform - IPQ806x, build - Build_ID - 12/02/20, 15:14:57)
  411. [ 28.478813] <NSS-CRYPTO>:qca-nss-crypto.ko is loaded for symbol link
  412. [ 28.485689] crypto bench loaded - Build_ID - 12/02/20, 15:14:58
  413. [ 28.490719] nss_crypto_register_user[151]:bf5c0074: Crypto Device is not ready
  414. [ 28.500583] nss_macsec init success
  415. [ 28.505502] nss is not enabled on this platform
  416. [ 28.509017] nss_ipsecmgr_init[914]:NSS is not enabled in this platform
  417. [ 28.517540] nss_crypto_register_user[151]:bf5c0074: Crypto Device is not ready
  418. [ 28.525262] nss_crypto_register_user[151]:bf5c0074: Crypto Device is not ready
  419. [ 28.541795] hidraw: raw HID events driver (C) Jiri Kosina
  420. [ 28.554743] u32 classifier
  421. [ 28.556430] input device check on
  422. [ 28.560127] Actions configured
  423. [ 28.565615] Mirror/redirect action on
  424. [ 28.590419] fuse init (API version 7.22)
  425. [ 28.598025] arp_tables: (C) 2002 David S. Miller
  426. [ 28.760594] Bluetooth: Core ver 2.18
  427. [ 28.763256] NET: Registered protocol family 31
  428. [ 28.767567] Bluetooth: HCI device and connection manager initialized
  429. [ 28.773960] Bluetooth: HCI socket layer initialized
  430. [ 28.778777] Bluetooth: L2CAP socket layer initialized
  431. [ 28.783879] Bluetooth: SCO socket layer initialized
  432. [ 28.790121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  433. [ 28.794402] Bluetooth: BNEP filters: protocol multicast
  434. [ 28.799636] Bluetooth: BNEP socket layer initialized
  435. [ 28.807053] usbcore: registered new interface driver btusb
  436. [ 28.814203] usbcore: registered new interface driver cdc_acm
  437. [ 28.818831] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  438. [ 28.836612] Ebtables v2.0 registered
  439. [ 28.840522] Bluetooth: HCI UART driver ver 2.2
  440. [ 28.843935] Bluetooth: HCI H4 protocol initialized
  441. [ 28.848707] Bluetooth: HCI BCSP protocol initialized
  442. [ 28.853686] Bluetooth: HCIATH3K protocol initialized
  443. [ 28.860715] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  444. [ 28.865633] Bluetooth: HIDP socket layer initialized
  445. [ 28.872734] ip_tables: (C) 2000-2006 Netfilter Core Team
  446. [ 28.886262] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  447. [ 28.941497] nf_conntrack_rtsp v0.6.21 loading
  448. [ 29.034243] nf_nat_rtsp v0.6.21 loading
  449. [ 29.042869] Netfilter messages via NETLINK v0.30.
  450. [ 29.050644] PPP MPPE Compression module registered
  451. [ 29.059103] Bluetooth: RFCOMM TTY layer initialized
  452. [ 29.063013] Bluetooth: RFCOMM socket layer initialized
  453. [ 29.068104] Bluetooth: RFCOMM ver 1.11
  454. [ 29.076791] usbcore: registered new interface driver ums-alauda
  455. [ 29.083839] usbcore: registered new interface driver ums-cypress
  456. [ 29.091177] usbcore: registered new interface driver ums-datafab
  457. [ 29.098240] usbcore: registered new interface driver ums-freecom
  458. [ 29.105460] usbcore: registered new interface driver ums-isd200
  459. [ 29.112763] usbcore: registered new interface driver ums-jumpshot
  460. [ 29.119961] usbcore: registered new interface driver ums-karma
  461. [ 29.127619] usbcore: registered new interface driver ums-sddr09
  462. [ 29.134922] usbcore: registered new interface driver ums-sddr55
  463. [ 29.142426] usbcore: registered new interface driver ums-usbat
  464. [ 29.152994] usbcore: registered new interface driver usbserial
  465. [ 29.157890] usbcore: registered new interface driver usbserial_generic
  466. [ 29.164444] usbserial: USB Serial support registered for generic
  467. [ 29.212488] xt_time: kernel timezone is -0000
  468. [ 29.232004] ctnetlink v0.93: registering with nfnetlink.
  469. [ 31.116961] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  470. [ 33.707677] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  471. [ 35.571788] mem_manager: module license 'unspecified' taints kernel.
  472. [ 35.577111] Disabling lock debugging due to kernel taint
  473. [ 35.630613] ath_dfs: Version 2.0.0
  474. [ 35.630613] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  475. [ 35.653220] ath_spectral: Version 2.0.0
  476. [ 35.653220] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  477. [ 36.792991] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  478. [ 37.923160] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)
  479. [ 37.941758] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  480. [ 37.960411] ath_tx99: Version 2.0
  481. [ 37.960411] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
  482. [ 37.998925] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  483. [ 38.027663] ath_da_pci: (Atheros/multi-bss)
  484. [ 39.346339] *********** IPQ4019 *************Wifi0 CPU frequency 250000000
  485. [ 39.362458] hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
  486. [ 39.401602] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
  487. __ol_ath_attach() Allocated scn cc6404c0
  488. [ 39.415530] nss is not enabled on this platform
  489. [ 39.420005] nss register id -1 offload mode enabled = 0 nss config 0 Target Type b
  490. [ 39.427643] __ol_ath_attach: dev name wifi0
  491. [ 39.431814] ol_ath_attach interface_id 0
  492. [ 39.435925] ol_target_init() BMI inited.
  493. [ 39.439728] ol_target_init() BMI Get Target Info.
  494. [ 39.444326] Chip id: 0xb, chip version: 0x1000000
  495. [ 39.448989]
  496. [ 39.448989] CE WAR Disabled
  497. [ 39.453765] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  498. [ 39.460153] ol_target_init() configure Target .
  499. [ 39.464327]
  500. [ 39.464327] Target Version is 1000000
  501. [ 39.469020]
  502. [ 39.469020] Flash Download Address c0000
  503. [ 39.474542] ol_transfer_bin_file: flash data file defined
  504. [ 39.479896] ol_transfer_bin_file[3756] Get Caldata for wifi0.
  505. [ 39.485706] qdf_fs_read[59], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 2098file size:12064qc98xx_verify_checksum: flash checksum passed: 0x291f
  506. [ 39.502659] ol_transfer_bin_file 3817: Download Flash data len 12064
  507. [ 39.509354] Board extended Data download address: 0x0
  508. [ 39.533653]
  509. [ 39.533653] Board data initialized
  510. [ 39.537736] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  511. [ 39.545394]
  512. [ 39.545394] Selecting OTP binary for CHIP Version -1610612717
  513. [ 39.667413] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  514. [ 39.673975] ol_transfer_bin_file 3637: downloading file 0, Download data len 4680
  515. [ 39.697875]
  516. [ 39.697875] First OTP send param 8000
  517. [ 39.706840] ol_ath_download_firmware :First OTP download and Execute is good address:0x4800 return param 4660
  518. [ 39.715742] ol_ath_download_firmware:##Board Id 18 , CHIP Id 0
  519. [ 39.721690] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  520. [ 39.728878]
  521. [ 39.728878] wifi0: Selecting board data file name boardData_1_0_IPQ4019_DK03_wifi0.bin
  522. [ 39.738194] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_DK03_wifi0.bin
  523. [ 39.819390] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  524. [ 39.825904] ol_transfer_bin_file 3637: downloading file 3, Download data len 12064
  525. [ 39.833803] Board extended Data download address: 0x0
  526. [ 39.858199] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  527. [ 39.864246]
  528. [ 39.864246] Selecting OTP binary for CHIP Version -1610612717
  529. [ 39.871813] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  530. [ 39.879081] ol_transfer_bin_file 3637: downloading file 0, Download data len 4680
  531. [ 39.903007]
  532. [ 39.903007] [Flash] : Ignore Module param
  533. [ 39.907551]
  534. [ 39.907551] Second otp download Param 10000
  535. [ 39.923681] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  536. [ 39.930945]
  537. [ 39.930945] Mission mode: Firmware CHIP Version -1610612717
  538. [ 39.939254] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  539. [ 39.946109] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  540. [ 39.953904] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  541. [ 39.960782] ol_swap_wlan_memory_expansion: length:165483 size_left:165503 dma_size_left:262144 fw_temp:d224c004 fw_entry_size:165507
  542. [ 39.972664] ol_swap_wlan_memory_expansion: dma_virt_addr :d220b000 fw_temp: d224c008 length: 165483
  543. [ 39.981911] Swap: bytes_left to copy: fw:16; dma_page:96661
  544. [ 39.987224] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:96661 fw_temp:d2274677 fw_entry_size:165507
  545. [ 39.998261] Swap: wrong length read:0
  546. [ 40.001904] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 165483 Target address 417b60
  547. [ 40.010955] scn=cc6404c0 target_write_addr=417b60 seg_info=cebf9b10
  548. [ 40.017166] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  549. [ 40.025952] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  550. [ 40.036179] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  551. [ 41.417585] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  552. [ 41.610820] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  553. [ 41.617300] ol_transfer_bin_file 3637: downloading file 1, Download data len 372560
  554. [ 42.867954] ol_target_init() Download FW done.
  555. [ 42.871745] ol_ath_attach() WMI attached. wmi_handle cf9f8000
  556. [ 42.877299] wmi_unified_register_event_handler: Event id 62 is unavailable
  557. [ 42.884186] +htc_create .. HIF :cca48000-htc_create: (0xcf187000)
  558. [ 42.890158] htc_wmi_init() HT Create . cf187000
  559. [ 42.894909] htc_wmi_init 7516 host_enable 0 nss_nwifi_offload 0
  560. [ 42.900746] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  561. [ 42.910107] OL_ACBKMinfree : 0
  562. [ 42.913216] OL_ACBEMinfree : 0
  563. [ 42.916357] OL_ACVIMinfree : 0
  564. [ 42.919469] OL_ACVOMinfree : 0
  565. [ 42.922611] hif_enable_fastpath, Enabling fastpath mode
  566. [ 42.927627] +HWT
  567. [ 42.929652] hif_completion_thread_startup: pipe_num:0 pipe_info:0xcca4c578hif_completion_thread_startup: pipe_num:3 pipe_info:0xcca4c650hif_completion_thread_startup: pipe_num:4 pipe_info:0xcca4c698
  568. [ 42.953710] -HWT
  569. [ 42.954786] Startup Mode-0 set
  570. [ 42.957749] pdev attach (null) -1
  571. [ 42.961328]
  572. [ 42.961328] <=== cfg max peer id 1056 ====>
  573. [ 42.967794] htt_peer_map_timer_init Enter pdev cbf70000 hrtimer cbf74940
  574. [ 42.973676]
  575. [ 42.973676] htt_alloc_peer_map_mem : Alloc Success : host q vaddr cbf7a000 paddr 8bf7a000
  576. [ 42.983365]
  577. [ 42.983365] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  578. [ 42.995959] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from cb400000
  579. [ 43.005356] Firmware_Build_Number:10
  580. [ 43.008042] FW wireless modes: 0x680c
  581. [ 43.011678] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
  582. [ 43.024076] btcoex_support 0, wlan_prio_gpio 0, coex_gpio_pin 0 0 0
  583. [ 43.030576] wmi_service_coex_gpio 1, wmi_service_4_wire_coex_support 1, coex_version 0
  584. [ 43.037481]
  585. [ 43.037481] Sending Ext resource cfg: HOST PLATFORM as 0
  586. [ 43.037481] fw_feature_bitmap as 50 to TGT
  587. [ 43.048404] ol_ath_service_ready_event: tt_support: 1
  588. [ 43.053366] ol_ath_service_ready_event: periodic_chan_stats: 1
  589. [ 43.059166] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  590. [ 43.065515] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  591. [ 43.075018] EXT NSS Supported
  592. [ 43.077932] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  593. [ 43.085704] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  594. [ 43.093122] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  595. [ 43.100985] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  596. [ 43.108474] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  597. [ 43.116459] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  598. [ 43.123851] idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 531
  599. [ 43.131874] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 744,
  600. [ 43.139117] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  601. [ 43.147024] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  602. [ 43.154502] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  603. [ 43.162143] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  604. [ 43.169585] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2028 actual units 531
  605. [ 43.178324] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 531 unit_len 2028,
  606. [ 43.185046] Support not added yet for Service 91
  607. [ 43.189633] Support not added yet for Service 92
  608. [ 43.194241] No EXT_MSG send INIT now
  609. [ 43.197801] chunk 0 len 13568 requested , ptr 0x8c63c000
  610. [ 43.203185] chunk 1 len 54272 requested , ptr 0x8bbf0000
  611. [ 43.208559] chunk 2 len 217088 requested , ptr 0x8b480000
  612. [ 43.214034] chunk 3 len 395064 requested , ptr 0x8b500000
  613. [ 43.219495] chunk 4 len 107520 requested , ptr 0x8b460000
  614. [ 43.224972] chunk 5 len 6144 requested , ptr 0x8c93e000
  615. [ 43.230268] chunk 6 len 1076868 requested , ptr 0x8b600000
  616. [ 43.235869] ol_ath_service_ready_event[4206] WAPI MBSSID 2
  617. [ 43.241544] smart_log_init: Smart logging Enabled buf=cb710000 (size=65536)
  618. [ 43.278010] Version = 16777216 3 status = 0
  619. [ 43.281295] ol_ath_connect_htc() WMI is ready
  620. [ 43.285650] target uses HTT version 2.2; host uses 2.2
  621. [ 43.290762] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
  622. [ 43.305614] ol_ath_attach() connect HTC.
  623. [ 43.308590] bypasswmi : 0
  624. [ 43.311272] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  625. [ 43.322955] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
  626. [ 43.329771] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
  627. [ 43.336596] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
  628. [ 43.343330] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
  629. [ 43.350222] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
  630. [ 43.357377] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
  631. [ 43.364598] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
  632. [ 43.371889] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
  633. [ 43.379252] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
  634. [ 43.386645] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
  635. [ 43.394023] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
  636. [ 43.401488] ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
  637. [ 43.409026] ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
  638. [ 43.416853] OL Resmgr Init-ed
  639. [ 43.419684] ieee80211_bsteering_attach: Band steering initialized
  640. [ 43.425656] acfg_attach: 2961: Netlink socket created:ce946c00
  641. [ 43.431486] SPECTRAL : get_capability not registered
  642. [ 43.436367] HAL_CAP_PHYDIAG : Capable
  643. [ 43.440036] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  644. [ 43.448085] SPECTRAL : get_capability not registered
  645. [ 43.453048] HAL_CAP_RADAR : Capable
  646. [ 43.456683] SPECTRAL : Need to fix the capablity check for SPECTRAL
  647. [ 43.456683] (spectral_attach : 242)
  648. [ 43.466528] SPECTRAL : get_capability not registered
  649. [ 43.471452] HAL_CAP_SPECTRAL_SCAN : Capable
  650. [ 43.475604] SPECTRAL : get_tsf64 not registered
  651. [ 43.480151] spectral_init_netlink 78 NULL SKB
  652. [ 43.484463] Green-AP : Green-AP : Attached
  653. [ 43.484463]
  654. [ 43.490029] Green-AP : Attached
  655. [ 43.493138] rate power table override is only supported for AR98XX
  656. [ 43.499382] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
  657. [ 43.506585] ol_if_dfs_attach: called; ptr=cc4d198c, radar_info=cca39bd0
  658. [ 43.513123] dfs_attach: event log enabled by default
  659. [ 43.518911] >>>> CB Set (null)
  660. [ 43.521663] ol_ath_attach() UMAC attach .
  661. [ 43.525343]
  662. [ 43.525343] BURSTING enabled by default
  663. [ 43.530818] ol_ath_attach: Set global_ic[1] ..ptr:bfabd940
  664. [ 43.536227] ath_lowi_if_netlink_init LOWI Netlink successfully created
  665. [ 43.542768] osif_wrap_attach:443 osif wrap attached
  666. [ 43.547598] osif_wrap_devt_init:404 osif wrap dev table init done
  667. [ 43.553669] Wrap Attached: Wrap_com =cdce1400 ic->ic_wrap_com=cdce1400 &wrap_com->wc_devt=cdce1400
  668. [ 43.562776] __ol_ath_attach: needed_headroom reservation 60
  669. [ 43.569491] ol_ath_thermal_mitigation_attach: --
  670. [ 43.573114] ol_ath_ahb_probe num_radios=0, wifi_radios[0].sc = cc6404c0 wifi_radio_type = 2
  671. [ 43.581451] ath_sysfs_diag_init: diag_fsattr
  672. [ 43.586081] *********** IPQ4019 *************Wifi1 CPU frequency 250000000
  673. [ 43.602855] hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
  674. [ 43.640998] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
  675. __ol_ath_attach() Allocated scn cb7404c0
  676. [ 43.654927] nss is not enabled on this platform
  677. [ 43.659383] nss register id -1 offload mode enabled = 0 nss config 0 Target Type b
  678. [ 43.667042] __ol_ath_attach: dev name wifi1
  679. [ 43.671208] ol_ath_attach interface_id 1
  680. [ 43.675339] ol_target_init() BMI inited.
  681. [ 43.679100] ol_target_init() BMI Get Target Info.
  682. [ 43.683712] Chip id: 0xb, chip version: 0x1000000
  683. [ 43.688372]
  684. [ 43.688372] CE WAR Disabled
  685. [ 43.692880] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  686. [ 43.698285] ol_target_init() configure Target .
  687. [ 43.702726]
  688. [ 43.702726] Target Version is 1000000
  689. [ 43.707818]
  690. [ 43.707818] Flash Download Address c0000
  691. [ 43.713480] ol_transfer_bin_file: flash data file defined
  692. [ 43.718845] ol_transfer_bin_file[3756] Get Caldata for wifi1.
  693. [ 43.724639] qdf_fs_read[59], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 724file size:12064qc98xx_verify_checksum: flash checksum passed: 0x37f4
  694. [ 43.741524] ol_transfer_bin_file 3817: Download Flash data len 12064
  695. [ 43.748206] Board extended Data download address: 0x0
  696. [ 43.772463]
  697. [ 43.772463] Board data initialized
  698. [ 43.776553] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  699. [ 43.783977]
  700. [ 43.783977] Selecting OTP binary for CHIP Version -1610612717
  701. [ 43.791580] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  702. [ 43.798827] ol_transfer_bin_file 3637: downloading file 0, Download data len 4680
  703. [ 43.822776]
  704. [ 43.822776] First OTP send param 8000
  705. [ 43.831659] ol_ath_download_firmware :First OTP download and Execute is good address:0x6400 return param 4660
  706. [ 43.840630] ol_ath_download_firmware:##Board Id 25 , CHIP Id 0
  707. [ 43.846516] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  708. [ 43.853330]
  709. [ 43.853330] wifi1: Selecting board data file name boardData_1_0_IPQ4019_YA131_wifi1.bin
  710. [ 43.862882] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_YA131_wifi1.bin
  711. [ 43.875715] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  712. [ 43.882784] ol_transfer_bin_file 3637: downloading file 3, Download data len 12064
  713. [ 43.890752] Board extended Data download address: 0x0
  714. [ 43.904110] [wifi0] FWLOG: [54049] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  715. [ 43.911731] [wifi0] FWLOG: [54049] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  716. [ 43.920378] [wifi0] FWLOG: [54049] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  717. [ 43.929068] [wifi0] FWLOG: [54049] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  718. [ 43.937418] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  719. [ 43.937425]
  720. [ 43.937425] Selecting OTP binary for CHIP Version -1610612717
  721. [ 43.937574] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  722. [ 43.937587] ol_transfer_bin_file 3637: downloading file 0, Download data len 4680
  723. [ 43.967150] [wifi0] FWLOG: [54195] UNKNOWN 22:55 ( 0x3a, 0xa10, 0x160, 0x0, 0x12 )
  724. [ 43.974654] [wifi0] FWLOG: [54195] UNKNOWN 22:55 ( 0x3a, 0x0, 0x12, 0x10, 0x12 )
  725. [ 43.988205]
  726. [ 43.988205] [Flash] : Ignore Module param
  727. [ 43.992780]
  728. [ 43.992780] Second otp download Param 10000
  729. [ 44.009074] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  730. [ 44.016327]
  731. [ 44.016327] Mission mode: Firmware CHIP Version -1610612717
  732. [ 44.023999] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  733. [ 44.031214] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  734. [ 44.038914] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  735. [ 44.045975] ol_swap_wlan_memory_expansion: length:165483 size_left:165503 dma_size_left:262144 fw_temp:d2ae1004 fw_entry_size:165507
  736. [ 44.057846] ol_swap_wlan_memory_expansion: dma_virt_addr :d2a2b000 fw_temp: d2ae1008 length: 165483
  737. [ 44.067135] Swap: bytes_left to copy: fw:16; dma_page:96661
  738. [ 44.072436] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:96661 fw_temp:d2b09677 fw_entry_size:165507
  739. [ 44.083427] Swap: wrong length read:0
  740. [ 44.087051] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 165483 Target address 417b60
  741. [ 44.096035] scn=cb7404c0 target_write_addr=417b60 seg_info=ceaaf410
  742. [ 44.102374] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  743. [ 44.111111] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  744. [ 44.121303] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  745. [ 44.130215] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  746. [ 44.136681] ol_transfer_bin_file 3637: downloading file 1, Download data len 372560
  747. [ 44.625699] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  748. [ 45.390314] ol_target_init() Download FW done.
  749. [ 45.394041] ol_ath_attach() WMI attached. wmi_handle cbf7e000
  750. [ 45.399647] wmi_unified_register_event_handler: Event id 62 is unavailable
  751. [ 45.406606] +htc_create .. HIF :cb7f0000-htc_create: (0xcf186800)
  752. [ 45.412664] htc_wmi_init() HT Create . cf186800
  753. [ 45.417595] htc_wmi_init 7516 host_enable 0 nss_nwifi_offload 0
  754. [ 45.423269] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  755. [ 45.432505] OL_ACBKMinfree : 0
  756. [ 45.435571] OL_ACBEMinfree : 0
  757. [ 45.438693] OL_ACVIMinfree : 0
  758. [ 45.441847] OL_ACVOMinfree : 0
  759. [ 45.444950] hif_enable_fastpath, Enabling fastpath mode
  760. [ 45.449997] +HWT
  761. [ 45.451986] hif_completion_thread_startup: pipe_num:0 pipe_info:0xcb7f4578hif_completion_thread_startup: pipe_num:3 pipe_info:0xcb7f4650hif_completion_thread_startup: pipe_num:4 pipe_info:0xcb7f4698
  762. [ 45.474116] -HWT
  763. [ 45.475158] Startup Mode-0 set
  764. [ 45.478130] pdev attach (null) -1
  765. [ 45.481714]
  766. [ 45.481714] <=== cfg max peer id 1056 ====>
  767. [ 45.488075] htt_peer_map_timer_init Enter pdev cacc0000 hrtimer cacc4940
  768. [ 45.494093]
  769. [ 45.494093] htt_alloc_peer_map_mem : Alloc Success : host q vaddr cb006000 paddr 8b006000
  770. [ 45.503777]
  771. [ 45.503777] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  772. [ 45.515761] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from ca940000
  773. [ 45.525130] Firmware_Build_Number:10
  774. [ 45.527800] FW wireless modes: 0x1f9001
  775. [ 45.531617] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
  776. [ 45.541535] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
  777. [ 45.549791]
  778. [ 45.549791] Sending Ext resource cfg: HOST PLATFORM as 0
  779. [ 45.549791] fw_feature_bitmap as 50 to TGT
  780. [ 45.560337] ol_ath_service_ready_event: tt_support: 1
  781. [ 45.565288] ol_ath_service_ready_event: periodic_chan_stats: 1
  782. [ 45.571165] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  783. [ 45.577443] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  784. [ 45.586960] EXT NSS Supported
  785. [ 45.589867] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  786. [ 45.597638] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  787. [ 45.605057] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  788. [ 45.612925] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  789. [ 45.620423] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  790. [ 45.628396] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  791. [ 45.635790] idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 531
  792. [ 45.643833] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 744,
  793. [ 45.651064] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  794. [ 45.658960] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  795. [ 45.666430] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  796. [ 45.674079] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  797. [ 45.681532] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2028 actual units 531
  798. [ 45.690385] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 531 unit_len 2028,
  799. [ 45.697028] Support not added yet for Service 91
  800. [ 45.701636] Support not added yet for Service 92
  801. [ 45.706222] No EXT_MSG send INIT now
  802. [ 45.709792] chunk 0 len 13568 requested , ptr 0x8c938000
  803. [ 45.715183] chunk 1 len 54272 requested , ptr 0x8a9a0000
  804. [ 45.720559] chunk 2 len 217088 requested , ptr 0x8a9c0000
  805. [ 45.726016] chunk 3 len 395064 requested , ptr 0x8aa00000
  806. [ 45.731497] chunk 4 len 107520 requested , ptr 0x8aa80000
  807. [ 45.736957] chunk 5 len 6144 requested , ptr 0x8c8be000
  808. [ 45.742259] chunk 6 len 1076868 requested , ptr 0x8a400000
  809. [ 45.747874] ol_ath_service_ready_event[4206] WAPI MBSSID 2
  810. [ 45.753553] smart_log_init: Smart logging Enabled buf=ca510000 (size=65536)
  811. [ 45.790988] Version = 16777216 3 status = 0
  812. [ 45.794269] ol_ath_connect_htc() WMI is ready
  813. [ 45.798628] target uses HTT version 2.2; host uses 2.2
  814. [ 45.803725] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
  815. [ 45.818561] ol_ath_attach() connect HTC.
  816. [ 45.821576] bypasswmi : 0
  817. [ 45.824164] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  818. [ 45.835910] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  819. [ 45.842964] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  820. [ 45.849777] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  821. [ 45.856643] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  822. [ 45.863620] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  823. [ 45.870619] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  824. [ 45.877889] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  825. [ 45.885278] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  826. [ 45.892803] Add VHT80 channel: 5210
  827. [ 45.896117] Add VHT80 channel: 5290
  828. [ 45.899586] Add VHT80 channel: 5530
  829. [ 45.903072] Add VHT80 channel: 5610
  830. [ 45.906531] Add VHT80 channel: 5690
  831. [ 45.910013] Add VHT80 channel: 5775
  832. [ 45.913522] Skipping VHT80 channel 5825
  833. [ 45.917302] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
  834. [ 45.925036] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
  835. [ 45.933891] freq=58
  836. [ 45.935060] freq=106
  837. [ 45.937312] freq=122
  838. [ 45.939567] freq=138
  839. [ 45.941893] OL Resmgr Init-ed
  840. [ 45.944945] ieee80211_bsteering_attach: Band steering initialized
  841. [ 45.950889] acfg_attach: Offload using existing sock ce946c00
  842. [ 45.956636] SPECTRAL : get_capability not registered
  843. [ 45.961609] HAL_CAP_PHYDIAG : Capable
  844. [ 45.965184] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  845. [ 45.973268] SPECTRAL : get_capability not registered
  846. [ 45.978198] HAL_CAP_RADAR : Capable
  847. [ 45.981856] SPECTRAL : Need to fix the capablity check for SPECTRAL
  848. [ 45.981856] (spectral_attach : 242)
  849. [ 45.991664] SPECTRAL : get_capability not registered
  850. [ 45.996600] HAL_CAP_SPECTRAL_SCAN : Capable
  851. [ 46.000781] SPECTRAL : get_tsf64 not registered
  852. [ 46.005286] spectral_init_netlink 78 NULL SKB
  853. [ 46.009627] Green-AP : Green-AP : Attached
  854. [ 46.009627]
  855. [ 46.015190] Green-AP : Attached
  856. [ 46.018304] rate power table override is only supported for AR98XX
  857. [ 46.024636] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
  858. [ 46.031775] ol_if_dfs_attach: called; ptr=ca50998c, radar_info=cca39bd0
  859. [ 46.038272] dfs_attach: event log enabled by default
  860. [ 46.044141] >>>> CB Set (null)
  861. [ 46.047403] ol_ath_attach() UMAC attach .
  862. [ 46.050568]
  863. [ 46.050568] BURSTING enabled by default
  864. [ 46.056105] ol_ath_attach: Set global_ic[2] ..ptr:bfabd940
  865. [ 46.061466] ath_lowi_if_netlink_init Incremented LOWI netlink ref count: 2
  866. [ 46.068232] osif_wrap_attach:443 osif wrap attached
  867. [ 46.073143] osif_wrap_devt_init:404 osif wrap dev table init done
  868. [ 46.079160] Wrap Attached: Wrap_com =cf22e400 ic->ic_wrap_com=cf22e400 &wrap_com->wc_devt=cf22e400
  869. [ 46.088295] __ol_ath_attach: needed_headroom reservation 60
  870. [ 46.095707] ol_ath_thermal_mitigation_attach: --
  871. [ 46.099339] ol_ath_ahb_probe num_radios=1, wifi_radios[1].sc = cb7404c0 wifi_radio_type = 2
  872. [ 46.107711] ath_sysfs_diag_init: diag_fsattr
  873. [ 46.112360] ath_ol_pci: (Atheros/multi-bss)
  874. [ 46.128409] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  875. [ 46.134634] +hif_update_pipe_callback pipeid 8
  876. [ 46.139025] -hif_update_pipe_callback
  877. [ 46.142734] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  878. [ 46.149876] +hif_update_pipe_callback pipeid 8
  879. [ 46.154335] -hif_update_pipe_callback
  880. [ 46.171514] __sa_init_module
  881. No Direct-Attach chipsets found.
  882. [ 46.197785] Removing athdebug proc file
  883. [ 46.200910] ath_dev: driver unloaded
  884. [ 46.213102] ath_tx99: driver unloaded
  885. [ 46.224546] ath_rate_atheros: driver unloaded
  886. [ 46.238226] ath_hal: driver unloaded
  887. [ 46.272871] Switching to Tx Mode-1 Threshold 280
  888. [ 46.426740] [wifi1] FWLOG: [56624] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  889. [ 46.434331] [wifi1] FWLOG: [56624] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  890. [ 46.443005] [wifi1] FWLOG: [56624] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  891. [ 46.451695] [wifi1] FWLOG: [56624] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  892. [ 46.460373] [wifi1] FWLOG: [56774] UNKNOWN 22:55 ( 0x3a, 0xa10, 0x160, 0x10, 0x0 )
  893. [ 46.467924] [wifi1] FWLOG: [56774] UNKNOWN 22:55 ( 0x3a, 0x10, 0x0, 0x10, 0x12 )
  894. [ 48.785862] Switching to Tx Mode-1 Threshold 280
  895. [ 48.872016] UBI warning: ubi_open_volume: cannot open device 0, volume 2, error -16
  896. qcawifi disable radio wifi0
  897. qcawifi disable radio wifi1
  898. qcawifi: enable radio wifi0
  899. qcawifi: enable radio wifi1
  900.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!