Advertisement
codekipper

Pine64 netboot Working With Armbian Image

Dec 1st, 2016
172
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.17 KB | None | 0 0
  1. The Good
  2. HELLO! BOOT0 is starting!
  3. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  4.  
  5. boot0 version : 4.0.0
  6. set pll start
  7. set pll end
  8. rtc[0] value = 0x00000000
  9. rtc[1] value = 0x00000000
  10. rtc[2] value = 0x00000000
  11. rtc[3] value = 0x00000000
  12. rtc[4] value = 0x00000000
  13. rtc[5] value = 0x00000000
  14. DRAM driver version: V1.1
  15. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  16. PMU: AXP81X
  17. ddr voltage = 1500 mv
  18. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  19. DRAM clk = 672 MHz
  20. DRAM zq value: 003b3bbb
  21. DRAM single rank full DQ OK
  22. DRAM size = 1024 MB
  23. DRAM init ok
  24. dram size =1024
  25. card boot number = 0, boot0 copy = 0
  26. card no is 0
  27. sdcard 0 line count 4
  28. [mmc]: mmc driver ver 2015-05-08 20:06
  29. [mmc]: sdc0 spd mode error, 2
  30. [mmc]: Wrong media type 0x00000000
  31. [mmc]: ***Try SD card 0***
  32. [mmc]: HSSDR52/SDR25 4 bit
  33. [mmc]: 50000000 Hz
  34. [mmc]: 14980 MB
  35. [mmc]: ***SD/MMC 0 init OK!!!***
  36. sdcard 0 init ok
  37. The size of uboot is 00070000.
  38. sum=ba880801
  39. src_sum=ba880801
  40. Succeed in loading uboot from sdmmc flash.
  41. boot0: start load other image
  42. boot0: Loading BL3-1
  43. Loading file 0 at address 0x40000000,size 0x00000200 success
  44. boot0: Loading scp
  45. Loading file 2 at address 0x00040000,size 0x0000c200 success
  46. set arisc reset to de-assert state
  47. Ready to disable icache.
  48. Jump to secend Boot.
  49. NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
  50. NOTICE: Configuring SPC Controller
  51. NOTICE: BL3-1: v1.0(debug):cd7fa48
  52. NOTICE: BL3-1: Built : 11:59:28, Nov 28 2016
  53. NOTICE: Configuring AXP PMIC
  54. NOTICE: PMIC: already configured for RSB
  55. NOTICE: PMIC: setup successful
  56. INFO: BL3-1: Initializing runtime services
  57. INFO: BL3-1: Preparing for EL3 exit to normal world
  58. INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
  59.  
  60.  
  61. U-Boot 2016.11-00099-g193b327 (Nov 28 2016 - 12:13:46 +0100) Allwinner Technology
  62.  
  63. CPU: Allwinner A64 (SUN50I)
  64. Model: Pine64+
  65. DRAM: 1 GiB
  66. MMC: SUNXI SD/MMC: 0
  67. *** Warning - bad CRC, using default environment
  68.  
  69. In: serial
  70. Out: serial
  71. Err: serial
  72. Net: phy interface7
  73. eth0: ethernet@01c30000
  74. starting USB...
  75. USB0: USB EHCI 1.00
  76. USB1: USB OHCI 1.0
  77. scanning bus 0 for devices... 1 USB Device(s) found
  78. Hit any key to stop autoboot: 2  1  0
  79. switch to partitions #0, OK
  80. mmc0 is current device
  81. Scanning mmc 0:1...
  82. Found U-Boot script /boot.scr
  83. reading /boot.scr
  84. 563 bytes read in 20 ms (27.3 KiB/s)
  85. ## Executing script at 4fc00000
  86. BOOTP broadcast 1
  87. BOOTP broadcast 2
  88. BOOTP broadcast 3
  89. BOOTP broadcast 4
  90. DHCP client bound to address 192.168.0.130 (1761 ms)
  91. Using ethernet@01c30000 device
  92. TFTP from server 192.168.0.199; our IP address is 192.168.0.130
  93. Filename 'Image'.
  94. Load address: 0x40080000
  95. Loading: *#################################################################
  96. #################################################################
  97. #################################################################
  98. #################################################################
  99. #################################################################
  100. #################################################################
  101. #################################################################
  102. #################################################################
  103. #################################################################
  104. #################################################################
  105. #################################################################
  106. #################################################################
  107. #################################################################
  108. #######################
  109. 10.1 MiB/s
  110. done
  111. Bytes transferred = 12731904 (c24600 hex)
  112. Using ethernet@01c30000 device
  113. TFTP from server 192.168.0.199; our IP address is 192.168.0.130
  114. Filename 'sun50i-a64-pine64-plus.dtb'.
  115. Load address: 0x4fa00000
  116. Loading: *##
  117. 8.1 MiB/s
  118. done
  119. Bytes transferred = 16906 (420a hex)
  120. ## Flattened Device Tree blob at 4fa00000
  121. Booting using the fdt blob at 0x4fa00000
  122. Loading Device Tree to 0000000049ff8000, end 0000000049fff209 ... OK
  123.  
  124. Starting kernel ...
  125.  
  126. [ 0.000000] Booting Linux on physical CPU 0x0
  127. [ 0.000000] Linux version 4.7.0-pine64 (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #4 SMP PREEMPT Sun Oct 23 17:49:12 CEST 2016
  128. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  129. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
  130. [ 0.000000] bootconsole [uart0] enabled
  131. [ 0.000000] efi: Getting EFI parameters from FDT:
  132. [ 0.000000] efi: UEFI not found.
  133. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  134. [ 0.000000] psci: probing for conduit method from DT.
  135. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  136. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  137. [ 0.000000] psci: Trusted OS migration not required
  138. [ 0.000000] percpu: Embedded 20 pages/cpu @ffff80003ef85000 s42648 r8192 d31080 u81920
  139. [ 0.000000] Detected VIPT I-cache on CPU0
  140. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  141. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048
  142. [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart,mmio32,0x1c28000 root=/dev/mmcblk0p2 rootwait
  143. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  144. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  145. [ 0.000000] log_buf_len min size: 16384 bytes
  146. [ 0.000000] log_buf_len: 32768 bytes
  147. [ 0.000000] early log buf free: 14664(89%)
  148. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  149. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  150. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  151. [ 0.000000] software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffff800039c00000-ffff80003dbfffff]
  152. [ 0.000000] Memory: 935032K/1048576K available (7616K kernel code, 657K rwdata, 3196K rodata, 960K init, 260K bss, 97160K reserved, 16384K cma-reserved)
  153. [ 0.000000] Virtual kernel memory layout:
  154. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  155. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  156. [ 0.000000] .text : 0xffff000008080000 - 0xffff0000087e0000 ( 7552 KB)
  157. [ 0.000000] .rodata : 0xffff0000087e0000 - 0xffff000008b10000 ( 3264 KB)
  158. [ 0.000000] .init : 0xffff000008b10000 - 0xffff000008c00000 ( 960 KB)
  159. [ 0.000000] .data : 0xffff000008c00000 - 0xffff000008ca4600 ( 658 KB)
  160. [ 0.000000] .bss : 0xffff000008ca4600 - 0xffff000008ce58b4 ( 261 KB)
  161. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  162. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  163. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  164. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
  165. [ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
  166. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  167. [ 0.000000] Preemptible hierarchical RCU implementation.
  168. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  169. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  170. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  171. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  172. [ 0.000000] GIC: Using split EOI/Deactivate mode
  173. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  174. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  175. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  176. [ 0.008321] Console: colour dummy device 80x25
  177. [ 0.012782] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  178. [ 0.023044] pid_max: default: 32768 minimum: 301
  179. [ 0.027729] Security Framework initialized
  180. [ 0.031864] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  181. [ 0.038562] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  182. [ 0.046496] ASID allocator initialised with 65536 entries
  183. [ 0.072503] EFI services will not be available.
  184. [ 0.102326] Detected VIPT I-cache on CPU1
  185. [ 0.102374] CPU1: Booted secondary processor [410fd034]
  186. [ 0.117700] Detected VIPT I-cache on CPU2
  187. [ 0.117732] CPU2: Booted secondary processor [410fd034]
  188. [ 0.133698] Detected VIPT I-cache on CPU3
  189. [ 0.133723] CPU3: Booted secondary processor [410fd034]
  190. [ 0.133779] Brought up 4 CPUs
  191. [ 0.164399] SMP: Total of 4 processors activated.
  192. [ 0.169102] CPU features: detected feature: 32-bit EL0 Support
  193. [ 0.174934] CPU: All CPU(s) started at EL2
  194. [ 0.179046] alternatives: patching kernel code
  195. [ 0.184292] devtmpfs: initialized
  196. [ 0.191398] DMI not present or invalid.
  197. [ 0.195453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  198. [ 0.205750] pinctrl core: initialized pinctrl subsystem
  199. [ 0.212230] NET: Registered protocol family 16
  200. [ 0.232752] cpuidle: using governor menu
  201. [ 0.236845] vdso: 2 pages (1 code @ ffff0000087e6000, 1 data @ ffff000008c04000)
  202. [ 0.244247] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  203. [ 0.251789] DMA: preallocated 256 KiB pool for atomic allocations
  204. [ 0.258086] Serial: AMBA PL011 UART driver
  205. [ 0.290751] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  206. [ 0.297988] ACPI: Interpreter disabled.
  207. [ 0.302776] vgaarb: loaded
  208. [ 0.305740] SCSI subsystem initialized
  209. [ 0.310066] usbcore: registered new interface driver usbfs
  210. [ 0.315621] usbcore: registered new interface driver hub
  211. [ 0.321006] usbcore: registered new device driver usb
  212. [ 0.326389] pps_core: LinuxPPS API ver. 1 registered
  213. [ 0.331359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  214. [ 0.340500] PTP clock support registered
  215. [ 0.344592] dmi: Firmware registration failed.
  216. [ 0.349193] Advanced Linux Sound Architecture Driver Initialized.
  217. [ 0.356108] clocksource: Switched to clocksource arch_sys_counter
  218. [ 0.362348] VFS: Disk quotas dquot_6.6.0
  219. [ 0.366326] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  220. [ 0.373453] pnp: PnP ACPI: disabled
  221. [ 0.384399] NET: Registered protocol family 2
  222. [ 0.389343] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  223. [ 0.396475] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  224. [ 0.403168] TCP: Hash tables configured (established 8192 bind 8192)
  225. [ 0.409607] UDP hash table entries: 512 (order: 2, 16384 bytes)
  226. [ 0.415552] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  227. [ 0.422065] NET: Registered protocol family 1
  228. [ 0.426715] RPC: Registered named UNIX socket transport module.
  229. [ 0.432644] RPC: Registered udp transport module.
  230. [ 0.437358] RPC: Registered tcp transport module.
  231. [ 0.442067] RPC: Registered tcp NFSv4.1 backchannel transport module.
  232. [ 0.449535] kvm [1]: 8-bit VMID
  233. [ 0.452684] kvm [1]: Hyp mode initialized successfully
  234. [ 0.457868] kvm [1]: vgic-v2@1c84000
  235. [ 0.461472] kvm [1]: vgic interrupt IRQ1
  236. [ 0.465479] kvm [1]: virtual timer IRQ4
  237. [ 0.471809] futex hash table entries: 1024 (order: 5, 131072 bytes)
  238. [ 0.478203] audit: initializing netlink subsys (disabled)
  239. [ 0.483644] audit: type=2000 audit(0.416:1): initialized
  240. [ 0.489405] workingset: timestamp_bits=44 max_order=18 bucket_order=0
  241. [ 0.506943] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  242. [ 0.513695] NFS: Registering the id_resolver key type
  243. [ 0.518800] Key type id_resolver registered
  244. [ 0.522993] Key type id_legacy registered
  245. [ 0.527415] fuse init (API version 7.24)
  246. [ 0.531907] 9p: Installing v9fs 9p2000 file system support
  247. [ 0.539838] io scheduler noop registered
  248. [ 0.543963] io scheduler cfq registered (default)
  249. [ 0.550935] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  250. [ 0.560081] xenfs: not registering filesystem on non-xen platform
  251. [ 0.569700] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  252. [ 0.577699] console [ttyS0] disabled
  253. [ 0.601561] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 10, base_baud = 1500000) is a U6_16550A
  254. [ 0.610551] console [ttyS0] enabled
  255. [ 0.610551] console [ttyS0] enabled
  256. [ 0.617527] bootconsole [uart0] disabled
  257. [ 0.617527] bootconsole [uart0] disabled
  258. [ 0.625965] SuperH (H)SCI(F) driver initialized
  259. [ 0.630750] msm_serial: driver initialized
  260. [ 0.635237] Unable to detect cache hierarchy from DT for CPU 0
  261. [ 0.645981] loop: module loaded
  262. [ 0.650828] tun: Universal TUN/TAP device driver, 1.6
  263. [ 0.655948] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  264. [ 0.662505] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  265. [ 0.668368] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  266. [ 0.674362] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  267. [ 0.681337] igb: Copyright (c) 2007-2014 Intel Corporation.
  268. [ 0.686967] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  269. [ 0.694796] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  270. [ 0.700770] sky2: driver version 1.30
  271. [ 0.704834] VFIO - User Level meta-driver version: 0.3
  272. [ 0.710855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  273. [ 0.717399] ehci-pci: EHCI PCI platform driver
  274. [ 0.721896] ehci-platform: EHCI generic platform driver
  275. [ 0.727197] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  276. [ 0.732853] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  277. [ 0.739055] ohci-pci: OHCI PCI platform driver
  278. [ 0.743548] ohci-platform: OHCI generic platform driver
  279. [ 0.748943] usbcore: registered new interface driver usb-storage
  280. [ 0.755728] mousedev: PS/2 mouse device common for all mice
  281. [ 0.762178] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  282. [ 0.768986] sun6i-rtc 1f00000.rtc: RTC enabled
  283. [ 0.773579] i2c /dev entries driver
  284. [ 0.778685] sdhci: Secure Digital Host Controller Interface driver
  285. [ 0.784896] sdhci: Copyright(c) Pierre Ossman
  286. [ 0.789297] Synopsys Designware Multimedia Card Interface Driver
  287. [ 0.796311] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  288. [ 0.832136] sunxi-mmc 1c0f000.mmc: base:0xffff00000807a000 irq:6
  289. [ 0.838242] sdhci-pltfm: SDHCI platform and OF driver helper
  290. [ 0.845379] ledtrig-cpu: registered to indicate activity on CPUs
  291. [ 0.852820] usbcore: registered new interface driver usbhid
  292. [ 0.858421] usbhid: USB HID core driver
  293. [ 0.863744] NET: Registered protocol family 17
  294. [ 0.868300] 9pnet: Installing 9P2000 support
  295. [ 0.872648] Key type dns_resolver registered
  296. [ 0.877559] registered taskstats version 1
  297. [ 0.882007] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:01:51 UTC (111)
  298. [ 0.890207] of_cfs_init
  299. [ 0.892738] of_cfs_init: OK
  300. [ 0.897692] ALSA device list:
  301. [ 0.900688] No soundcards found.
  302. [ 0.904414] Waiting for root device /dev/mmcblk0p2...
  303. [ 0.913034] mmc0: host does not support reading read-only switch, assuming write-enable
  304. [ 0.925084] mmc0: new high speed SDHC card at address 1234
  305. [ 0.931022] mmcblk0: mmc0:1234 SA16G 14.6 GiB
  306. [ 0.938265] mmcblk0: p1 p2
  307. [ 1.013814] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  308. [ 1.027476] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  309. [ 1.034793] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  310. [ 1.092902] EXT4-fs (mmcblk0p2): recovery complete
  311. [ 1.112406] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: (null)
  312. [ 1.120696] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  313. [ 1.137140] devtmpfs: mounted
  314. [ 1.140625] Freeing unused kernel memory: 960K (ffff800000b10000 - ffff800000c00000)
  315. [ 3.116928] random: systemd urandom read with 7 bits of entropy available
  316. [ 3.137030] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  317. [ 3.150573] systemd[1]: Detected architecture 'arm64'.
  318.  
  319. Welcome to Debian GNU/Linux 8 (jessie)!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement