API tools faq
paste
Guest User

Untitled

a guest
Sep 20th, 2021
52
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.94 KB | None | 0 0
raw download clone embed print report
  1. root@wrt:~# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 5.4.143 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16279-5cc0535800)) #0 SMP Tue Aug 31 22:20:08 2021
  4. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Linksys WRT32X
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] On node 0 totalpages: 131072
  9. [ 0.000000] Normal zone: 1152 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  12. [ 0.000000] percpu: Embedded 11 pages/cpu s15628 r8192 d21236 u45056
  13. [ 0.000000] pcpu-alloc: s15628 r8192 d21236 u45056 alloc=11*4096
  14. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  15. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
  16. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6
  17. [ 0.000000] Bootloader command line (ignored): console= root=/dev/mtdblock6
  18. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  19. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  20. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  21. [ 0.000000] Memory: 508376K/524288K available (7168K kernel code, 234K rwdata, 996K rodata, 1024K init, 239K bss, 15912K reserved, 0K cma-reserved, 0K highmem)
  22. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  23. [ 0.000000] rcu: Hierarchical RCU implementation.
  24. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  25. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  26. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  27. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  28. [ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
  29. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  30. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  31. [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
  32. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  33. [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
  34. [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
  35. [ 0.000000] random: get_random_bytes called from 0xc0a00c78 with crng_init=0
  36. [ 0.000005] sched_clock: 64 bits at 933MHz, resolution 1ns, wraps every 4398046511103ns
  37. [ 0.000013] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1ae5b571769, max_idle_ns: 881590513431 ns
  38. [ 0.000024] Switching to timer-based delay loop, resolution 1ns
  39. [ 0.000128] Ignoring duplicate/late registration of read_current_timer delay
  40. [ 0.000134] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  41. [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.00 BogoMIPS (lpj=9330000)
  42. [ 0.000246] pid_max: default: 32768 minimum: 301
  43. [ 0.000304] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  44. [ 0.000308] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  45. [ 0.000596] CPU: Testing write buffer coherency: ok
  46. [ 0.000606] CPU0: Spectre v2: using BPIALL workaround
  47. [ 0.000700] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  48. [ 0.000846] Setting up static identity map for 0x100000 - 0x100060
  49. [ 0.000907] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
  50. [ 0.000970] mvebu-pmsu: Initializing Power Management Service Unit
  51. [ 0.001015] rcu: Hierarchical SRCU implementation.
  52. [ 0.001105] smp: Bringing up secondary CPUs ...
  53. [ 0.001215] Booting CPU 1
  54. [ 0.001351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [ 0.001354] CPU1: Spectre v2: using BPIALL workaround
  56. [ 0.001398] smp: Brought up 1 node, 2 CPUs
  57. [ 0.001401] SMP: Total of 2 processors activated (3732.00 BogoMIPS).
  58. [ 0.001404] CPU: All CPU(s) started in SVC mode.
  59. [ 0.002752] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  60. [ 0.002803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  61. [ 0.002810] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  62. [ 0.002863] pinctrl core: initialized pinctrl subsystem
  63. [ 0.003183] NET: Registered protocol family 16
  64. [ 0.003633] DMA: preallocated 256 KiB pool for atomic coherent allocations
  65. [ 0.004136] cpuidle: using governor ladder
  66. [ 0.004259] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
  67. [ 0.004265] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
  68. [ 0.010507] cryptd: max_cpu_qlen set to 1000
  69. [ 0.011228] SCSI subsystem initialized
  70. [ 0.011288] libata version 3.00 loaded.
  71. [ 0.011378] usbcore: registered new interface driver usbfs
  72. [ 0.011399] usbcore: registered new interface driver hub
  73. [ 0.011414] usbcore: registered new device driver usb
  74. [ 0.011566] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  75. [ 0.012285] clocksource: Switched to clocksource arm_global_timer
  76. [ 0.012526] thermal_sys: Registered thermal governor 'step_wise'
  77. [ 0.012631] NET: Registered protocol family 2
  78. [ 0.012690] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  79. [ 0.012982] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  80. [ 0.012994] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  81. [ 0.013013] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  82. [ 0.013041] TCP: Hash tables configured (established 4096 bind 4096)
  83. [ 0.013074] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  84. [ 0.013088] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  85. [ 0.013161] NET: Registered protocol family 1
  86. [ 0.013173] PCI: CLS 0 bytes, default 64
  87. [ 0.014265] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  88. [ 0.016208] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  89. [ 0.016213] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  90. [ 0.016622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  91. [ 0.018280] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  92. [ 0.019206] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
  93. [ 0.019217] pci_bus 0000:00: root bus resource [bus 00-ff]
  94. [ 0.019221] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  95. [ 0.019225] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
  96. [ 0.019290] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
  97. [ 0.019303] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  98. [ 0.019411] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
  99. [ 0.019421] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  100. [ 0.020058] PCI: bus0: Fast back to back transfers disabled
  101. [ 0.020064] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  102. [ 0.020070] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  103. [ 0.020121] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
  104. [ 0.020143] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
  105. [ 0.020153] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
  106. [ 0.020221] pci 0000:01:00.0: supports D1 D2
  107. [ 0.020225] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
  108. [ 0.020905] PCI: bus1: Fast back to back transfers disabled
  109. [ 0.020912] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  110. [ 0.020968] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
  111. [ 0.020997] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
  112. [ 0.021009] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
  113. [ 0.021097] pci 0000:02:00.0: supports D1 D2
  114. [ 0.021101] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
  115. [ 0.021123] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
  116. [ 0.021813] PCI: bus2: Fast back to back transfers disabled
  117. [ 0.021819] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  118. [ 0.021840] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
  119. [ 0.021846] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
  120. [ 0.021850] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0300000-0xe03007ff pref]
  121. [ 0.021855] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0700000-0xe07007ff pref]
  122. [ 0.021860] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
  123. [ 0.021869] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
  124. [ 0.021876] pci 0000:00:01.0: PCI bridge to [bus 01]
  125. [ 0.021881] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
  126. [ 0.021887] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
  127. [ 0.021896] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
  128. [ 0.021905] pci 0000:00:02.0: PCI bridge to [bus 02]
  129. [ 0.021909] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
  130. [ 0.022116] mv_xor f1060800.xor: Marvell shared XOR driver
  131. [ 0.082628] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  132. [ 0.082730] mv_xor f1060900.xor: Marvell shared XOR driver
  133. [ 0.142625] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  134. [ 0.142754] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  135. [ 0.143301] printk: console [ttyS0] disabled
  136. [ 0.163375] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
  137. [ 1.007564] printk: console [ttyS0] enabled
  138. [ 1.013300] loop: module loaded
  139. [ 1.016457] Loading iSCSI transport class v2.0-870.
  140. [ 1.021745] ahci-mvebu f10a8000.sata: f10a8000.sata supply ahci not found, using dummy regulator
  141. [ 1.030615] ahci-mvebu f10a8000.sata: f10a8000.sata supply phy not found, using dummy regulator
  142. [ 1.039374] ahci-mvebu f10a8000.sata: f10a8000.sata supply target not found, using dummy regulator
  143. [ 1.048438] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  144. [ 1.057530] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  145. [ 1.066622] scsi host0: ahci-mvebu
  146. [ 1.070241] scsi host1: ahci-mvebu
  147. [ 1.073742] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
  148. [ 1.081696] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
  149. [ 1.090143] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
  150. [ 1.096533] nand: AMD/Spansion S34ML02G2
  151. [ 1.100471] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  152. [ 1.108518] Bad block table found at page 131008, version 0x01
  153. [ 1.115015] Bad block table found at page 130944, version 0x01
  154. [ 1.121287] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
  155. [ 1.128372] Creating 10 MTD partitions on "pxa3xx_nand-0":
  156. [ 1.133896] 0x000000000000-0x000000200000 : "u-boot"
  157. [ 1.139154] 0x000000200000-0x000000220000 : "u_env"
  158. [ 1.144303] 0x000000220000-0x000000260000 : "s_env"
  159. [ 1.149415] 0x000000260000-0x000000820000 : "unused_area"
  160. [ 1.155066] 0x0000007e0000-0x000000820000 : "devinfo"
  161. [ 1.160373] 0x000000900000-0x000008400000 : "kernel1"
  162. [ 1.165812] 0x000000f00000-0x000008400000 : "ubi"
  163. [ 1.170885] 0x000008400000-0x00000ff00000 : "kernel2"
  164. [ 1.176328] 0x000008a00000-0x00000ff00000 : "rootfs2"
  165. [ 1.181763] 0x00000ff00000-0x000010000000 : "BBT"
  166. [ 1.187002] libphy: Fixed MDIO Bus: probed
  167. [ 1.191399] libphy: orion_mdio_bus: probed
  168. [ 1.195656] mv88e6085 f1072004.mdio-mii:00: switch 0x3520 detected: Marvell 88E6352, revision 1
  169. [ 1.370734] libphy: mv88e6xxx SMI: probed
  170. [ 1.376435] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
  171. [ 1.385119] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:c9:ac:88
  172. [ 1.393233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  173. [ 1.399789] ehci-pci: EHCI PCI platform driver
  174. [ 1.404277] ehci-platform: EHCI generic platform driver
  175. [ 1.409586] ehci-orion: EHCI orion driver
  176. [ 1.413506] ata1: SATA link down (SStatus 0 SControl 300)
  177. [ 1.413684] orion-ehci f1058000.usb: EHCI Host Controller
  178. [ 1.419059] ata2: SATA link down (SStatus 0 SControl 300)
  179. [ 1.424462] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
  180. [ 1.437515] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
  181. [ 1.472285] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  182. [ 1.478420] hub 1-0:1.0: USB hub found
  183. [ 1.482196] hub 1-0:1.0: 1 port detected
  184. [ 1.486575] usbcore: registered new interface driver usb-storage
  185. [ 1.492745] i2c /dev entries driver
  186. [ 1.498645] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
  187. [ 1.506956] watchdog: f1020300.watchdog: falling back to default timeout (171)
  188. [ 1.514296] orion_wdt: Initial timeout 171 sec
  189. [ 1.518969] sdhci: Secure Digital Host Controller Interface driver
  190. [ 1.525179] sdhci: Copyright(c) Pierre Ossman
  191. [ 1.561262] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
  192. [ 1.568784] sdhci-pltfm: SDHCI platform and OF driver helper
  193. [ 1.577995] marvell-cesa f1090000.crypto: CESA device successfully registered
  194. [ 1.585618] NET: Registered protocol family 10
  195. [ 1.590452] Segment Routing with IPv6
  196. [ 1.594166] NET: Registered protocol family 17
  197. [ 1.598649] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  198. [ 1.611740] 8021q: 802.1Q VLAN Support v1.8
  199. [ 1.615976] Registering SWP/SWPB emulation handler
  200. [ 1.622658] mv88e6085 f1072004.mdio-mii:00: switch 0x3520 detected: Marvell 88E6352, revision 1
  201. [ 1.651078] random: fast init done
  202. [ 1.655516] mmc0: new high speed SDIO card at address 0001
  203. [ 1.798900] libphy: mv88e6xxx SMI: probed
  204. [ 1.972404] mv88e6085 f1072004.mdio-mii:00 lan4 (uninitialized): PHY [mv88e6xxx-1:00] driver [Marvell 88E1540]
  205. [ 1.989882] mv88e6085 f1072004.mdio-mii:00 lan3 (uninitialized): PHY [mv88e6xxx-1:01] driver [Marvell 88E1540]
  206. [ 2.007152] mv88e6085 f1072004.mdio-mii:00 lan2 (uninitialized): PHY [mv88e6xxx-1:02] driver [Marvell 88E1540]
  207. [ 2.024407] mv88e6085 f1072004.mdio-mii:00 lan1 (uninitialized): PHY [mv88e6xxx-1:03] driver [Marvell 88E1540]
  208. [ 2.041662] mv88e6085 f1072004.mdio-mii:00 wan (uninitialized): PHY [mv88e6xxx-1:04] driver [Marvell 88E1540]
  209. [ 2.072416] mv88e6085 f1072004.mdio-mii:00: configuring for fixed/ link mode
  210. [ 2.080785] DSA: tree 0 setup
  211. [ 2.083922] xhci-hcd f10f8000.usb3: xHCI Host Controller
  212. [ 2.089265] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
  213. [ 2.096853] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
  214. [ 2.106140] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
  215. [ 2.112183] hub 2-0:1.0: USB hub found
  216. [ 2.115971] hub 2-0:1.0: 1 port detected
  217. [ 2.120009] xhci-hcd f10f8000.usb3: xHCI Host Controller
  218. [ 2.125354] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
  219. [ 2.132886] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
  220. [ 2.139297] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  221. [ 2.147600] hub 3-0:1.0: USB hub found
  222. [ 2.151380] hub 3-0:1.0: 1 port detected
  223. [ 2.155829] UBI: auto-attach mtd6
  224. [ 2.159159] ubi0: attaching mtd6
  225. [ 2.162786] mv88e6085 f1072004.mdio-mii:00: Link is Up - 1Gbps/Full - flow control off
  226. [ 2.771719] ubi0: scanning is finished
  227. [ 2.783345] ubi0: attached mtd6 (name "ubi", size 117 MiB)
  228. [ 2.788856] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  229. [ 2.795765] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  230. [ 2.802584] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  231. [ 2.809575] ubi0: good PEBs: 936, bad PEBs: 0, corrupted PEBs: 0
  232. [ 2.815609] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  233. [ 2.822865] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1630448408
  234. [ 2.832037] ubi0: available PEBs: 0, total reserved PEBs: 936, PEBs reserved for bad PEB handling: 40
  235. [ 2.841809] ubi0: background thread "ubi_bgt0d" started, PID 869
  236. [ 2.841847] block ubiblock0_0: created from ubi0:0(rootfs)
  237. [ 2.853358] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  238. [ 2.860350] hctosys: unable to open rtc device (rtc0)
  239. [ 2.868029] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  240. [ 2.875565] Freeing unused kernel memory: 1024K
  241. [ 2.912385] Run /sbin/init as init process
  242. [ 3.083953] init: Console is alive
  243. [ 3.087427] init: - watchdog -
  244. [ 3.414998] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  245. [ 3.468387] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  246. [ 3.485801] init: - preinit -
  247. [ 3.759831] random: jshn: uninitialized urandom read (4 bytes read)
  248. [ 3.795108] random: jshn: uninitialized urandom read (4 bytes read)
  249. [ 3.873159] random: jshn: uninitialized urandom read (4 bytes read)
  250. [ 3.929025] mvneta f1070000.ethernet eth0: configuring for fixed/rgmii-id link mode
  251. [ 3.937165] mv88e6085 f1072004.mdio-mii:00 lan1: configuring for phy/gmii link mode
  252. [ 3.944908] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  253. [ 3.955108] 8021q: adding VLAN 0 to HW filter on device lan1
  254. [ 3.960808] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  255. [ 8.033696] UBIFS (ubi0:1): Mounting in unauthenticated mode
  256. [ 8.039430] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 978
  257. [ 8.080227] UBIFS (ubi0:1): recovery needed
  258. [ 8.179298] UBIFS (ubi0:1): recovery completed
  259. [ 8.183808] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  260. [ 8.191676] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  261. [ 8.201640] UBIFS (ubi0:1): FS size: 107548672 bytes (102 MiB, 847 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
  262. [ 8.212299] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  263. [ 8.218943] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 3B373C54-3568-4EFD-B969-CFEDD24193B5, small LPT model
  264. [ 8.236881] mount_root: switching to ubifs overlay
  265. [ 8.343534] urandom-seed: Seeding with /etc/urandom.seed
  266. [ 8.387234] procd: - early -
  267. [ 8.390613] procd: - watchdog -
  268. [ 8.924765] procd: - watchdog -
  269. [ 8.929352] procd: - ubus -
  270. [ 8.951403] urandom_read: 5 callbacks suppressed
  271. [ 8.951406] random: ubusd: uninitialized urandom read (4 bytes read)
  272. [ 8.983016] random: ubusd: uninitialized urandom read (4 bytes read)
  273. [ 8.990342] procd: - init -
  274. [ 9.359956] kmodloader: loading kernel modules from /etc/modules.d/*
  275. [ 9.374422] tun: Universal TUN/TAP device driver, 1.6
  276. [ 9.374443] urngd: v1.0.2 started.
  277. [ 9.382557] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
  278. [ 9.390521] Backport generated by backports.git v5.10.42-1-0-gbee5c545
  279. [ 9.409046] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181210>>
  280. [ 9.416505] random: crng init done
  281. [ 9.417128] pci 0000:00:01.0: enabling device (0140 -> 0142)
  282. [ 9.426289] ieee80211 phy0: priv->pcmd_buf = 9dbf1069 priv->pphys_cmd_buf = 6bcda96b
  283. [ 9.523992] ieee80211 phy0: fw download start
  284. [ 9.523998] ieee80211 phy0: ddr init: download start
  285. [ 9.524377] ieee80211 phy0: ddr init: download complete
  286. [ 9.680249] ieee80211 phy0: FwSize = 451040 downloaded Size = 451040 curr_iteration 65522
  287. [ 12.548284] ieee80211 phy0: fw download complete
  288. [ 12.548329] ieee80211 phy0: device node: pcie@1,0
  289. [ 12.563714] ieee80211 phy0: pcmd = 9dbf1069
  290. [ 12.581302] ieee80211 phy0: firmware version: 0x903020c
  291. [ 12.888294] ieee80211 phy0: firmware region code: 30
  292. [ 12.927111] ieee80211 phy0: 2G disabled, 5G enabled
  293. [ 12.932025] ieee80211 phy0: 4 TX antennas, 4 RX antennas
  294. [ 12.937571] pci 0000:00:02.0: enabling device (0140 -> 0142)
  295. [ 12.943386] ieee80211 phy1: priv->pcmd_buf = af5d1bfd priv->pphys_cmd_buf = 815891fd
  296. [ 12.950232] ieee80211 phy1: fw download start
  297. [ 12.950237] ieee80211 phy1: ddr init: download start
  298. [ 12.950620] ieee80211 phy1: ddr init: download complete
  299. [ 13.096702] ieee80211 phy1: FwSize = 451040 downloaded Size = 451040 curr_iteration 65526
  300. [ 14.288287] ieee80211 phy1: fw download complete
  301. [ 14.288336] ieee80211 phy1: device node: pcie@2,0
  302. [ 14.303811] ieee80211 phy1: pcmd = af5d1bfd
  303. [ 14.321307] ieee80211 phy1: firmware version: 0x903020c
  304. [ 14.628295] ieee80211 phy1: firmware region code: 30
  305. [ 14.661075] ieee80211 phy1: 2G enabled, 5G disabled
  306. [ 14.666009] ieee80211 phy1: 4 TX antennas, 4 RX antennas
  307. [ 14.673988] hidraw: raw HID events driver (C) Jiri Kosina
  308. [ 14.682053] Bluetooth: Core ver 2.22
  309. [ 14.685721] NET: Registered protocol family 31
  310. [ 14.690191] Bluetooth: HCI device and connection manager initialized
  311. [ 14.696597] Bluetooth: HCI socket layer initialized
  312. [ 14.701507] Bluetooth: L2CAP socket layer initialized
  313. [ 14.706608] Bluetooth: SCO socket layer initialized
  314. [ 14.712040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  315. [ 14.717408] Bluetooth: BNEP filters: protocol multicast
  316. [ 14.722690] Bluetooth: BNEP socket layer initialized
  317. [ 14.730341] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
  318. [ 15.461889] Bluetooth: FW download over, size 616840 bytes
  319. [ 16.062313] btmrvl_sdio mmc0:0001:2: sdio device tree data not available
  320. [ 16.070118] usbcore: registered new interface driver btusb
  321. [ 16.076484] Bluetooth: HCI UART driver ver 2.3
  322. [ 16.080955] Bluetooth: HCI UART protocol H4 registered
  323. [ 16.086130] Bluetooth: HCI UART protocol BCSP registered
  324. [ 16.091463] Bluetooth: HCI UART protocol ATH3K registered
  325. [ 16.097373] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  326. [ 16.103337] Bluetooth: HIDP socket layer initialized
  327. [ 16.117316] Bluetooth: RFCOMM TTY layer initialized
  328. [ 16.122232] Bluetooth: RFCOMM socket layer initialized
  329. [ 16.127426] Bluetooth: RFCOMM ver 1.11
  330. [ 16.131309] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
  331. [ 16.134428] xt_time: kernel timezone is -0000
  332. [ 16.138329] mwifiex_sdio mmc0:0001:1: WLAN FW is active
  333. [ 16.146794] PPP generic driver version 2.4.2
  334. [ 16.152733] NET: Registered protocol family 24
  335. [ 16.159810] kmodloader: done loading kernel modules from /etc/modules.d/*
  336. [ 16.188850] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p189)
  337. [ 16.197017] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p189)
  338. [ 17.815369] mvneta f1070000.ethernet eth0: Link is Down
  339. [ 17.826703] mvneta f1070000.ethernet eth0: configuring for fixed/rgmii-id link mode
  340. [ 17.834549] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  341. [ 17.845782] mv88e6085 f1072004.mdio-mii:00 lan1: configuring for phy/gmii link mode
  342. [ 17.859799] 8021q: adding VLAN 0 to HW filter on device lan1
  343. [ 17.865544] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  344. [ 17.872044] br-lan: port 1(lan1) entered blocking state
  345. [ 17.877326] br-lan: port 1(lan1) entered disabled state
  346. [ 17.888457] device lan1 entered promiscuous mode
  347. [ 17.893170] device eth0 entered promiscuous mode
  348. [ 18.000435] mv88e6085 f1072004.mdio-mii:00 lan2: configuring for phy/gmii link mode
  349. [ 18.012845] 8021q: adding VLAN 0 to HW filter on device lan2
  350. [ 18.018655] br-lan: port 2(lan2) entered blocking state
  351. [ 18.023942] br-lan: port 2(lan2) entered disabled state
  352. [ 18.030749] device lan2 entered promiscuous mode
  353. [ 18.047278] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
  354. [ 18.067067] mv88e6085 f1072004.mdio-mii:00 lan3: configuring for phy/gmii link mode
  355. [ 18.081929] 8021q: adding VLAN 0 to HW filter on device lan3
  356. [ 18.087876] br-lan: port 3(lan3) entered blocking state
  357. [ 18.093165] br-lan: port 3(lan3) entered disabled state
  358. [ 18.102459] device lan3 entered promiscuous mode
  359. [ 18.118826] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
  360. [ 18.142523] mv88e6085 f1072004.mdio-mii:00 lan4: configuring for phy/gmii link mode
  361. [ 18.161795] 8021q: adding VLAN 0 to HW filter on device lan4
  362. [ 18.167632] br-lan: port 4(lan4) entered blocking state
  363. [ 18.172926] br-lan: port 4(lan4) entered disabled state
  364. [ 18.205121] device lan4 entered promiscuous mode
  365. [ 18.237715] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
  366. [ 18.268561] mv88e6085 f1072004.mdio-mii:00 wan: configuring for phy/gmii link mode
  367. [ 18.324158] 8021q: adding VLAN 0 to HW filter on device wan
  368. [ 19.018371] ieee80211 phy1: change: 0xffffffff
  369. [ 19.109742] br-lan: port 5(wlan1) entered blocking state
  370. [ 19.115116] br-lan: port 5(wlan1) entered disabled state
  371. [ 19.120562] device wlan1 entered promiscuous mode
  372. [ 19.125347] br-lan: port 5(wlan1) entered blocking state
  373. [ 19.130687] br-lan: port 5(wlan1) entered forwarding state
  374. [ 19.137476] br-lan: port 5(wlan1) entered disabled state
  375. [ 19.338356] ieee80211 phy0: change: 0xffffffff
  376. [ 19.448934] br-lan: port 6(wlan0) entered blocking state
  377. [ 19.454324] br-lan: port 6(wlan0) entered disabled state
  378. [ 19.459791] device wlan0 entered promiscuous mode
  379. [ 19.464581] br-lan: port 6(wlan0) entered blocking state
  380. [ 19.469924] br-lan: port 6(wlan0) entered forwarding state
  381. [ 19.475507] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  382. [ 20.162571] br-lan: port 6(wlan0) entered disabled state
  383. [ 21.466292] mv88e6085 f1072004.mdio-mii:00 wan: Link is Up - 1Gbps/Full - flow control off
  384. [ 21.474617] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  385. [ 21.914229] mv88e6085 f1072004.mdio-mii:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  386. [ 21.922823] br-lan: port 4(lan4) entered blocking state
  387. [ 21.928073] br-lan: port 4(lan4) entered forwarding state
  388. [ 24.177384] ieee80211 phy1: change: 0x100
  389. [ 24.190504] ieee80211 phy1: change: 0x42
  390. [ 24.330376] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  391. [ 24.336880] br-lan: port 5(wlan1) entered blocking state
  392. [ 24.342223] br-lan: port 5(wlan1) entered forwarding state
  393. [ 24.492534] ieee80211 phy0: change: 0x100
  394. [ 24.505595] ieee80211 phy0: change: 0x40
  395. [ 24.722336] ieee80211 phy0: change: 0x40
  396. [ 24.942303] ieee80211 phy0: change: 0x40
  397. [ 25.055900] ieee80211 phy0: change: 0x100
  398. [ 25.068968] ieee80211 phy0: change: 0x100
  399. [ 25.082027] ieee80211 phy0: change: 0x42
  400. [ 25.259369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  401. [ 25.265879] br-lan: port 6(wlan0) entered blocking state
  402. [ 25.271216] br-lan: port 6(wlan0) entered forwarding state
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!