Advertisement
Guest User

SSD log

a guest
May 3rd, 2024
42
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.39 KB | None | 0 0
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.10.0-0.deb10.28-rt-amd64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: EK46XL85C49 YJX 120G
  6. Serial Number: AA000000000000000179
  7. LU WWN Device Id: 0 000000 000000000
  8. Firmware Version: 0818B
  9. User Capacity: 120,034,123,776 bytes [120 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Rotation Rate: Solid State Device
  12. Form Factor: 2.5 inches
  13. Device is: Not in smartctl database [for details use: -P showall]
  14. ATA Version is: ACS-2 (minor revision not indicated)
  15. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Fri May 3 17:13:45 2024 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 0) seconds.
  32. Offline data collection
  33. capabilities: (0x11) SMART execute Offline immediate.
  34. No Auto Offline data collection support.
  35. Suspend Offline collection upon new
  36. command.
  37. No Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. No Selective Self-test supported.
  41. SMART capabilities: (0x0002) Does not save SMART data before
  42. entering power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 1) minutes.
  50.  
  51. SMART Attributes Data Structure revision number: 1
  52. Vendor Specific SMART Attributes with Thresholds:
  53. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  54. 1 Raw_Read_Error_Rate 0x0000 100 100 050 Old_age Offline - 0
  55. 5 Reallocated_Sector_Ct 0x0002 100 100 050 Old_age Always - 0
  56. 9 Power_On_Hours 0x0000 100 100 050 Old_age Offline - 1261
  57. 12 Power_Cycle_Count 0x0000 100 100 050 Old_age Offline - 333
  58. 160 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0
  59. 161 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 250
  60. 162 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
  61. 163 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
  62. 164 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 261734
  63. 165 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 140
  64. 166 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 88
  65. 167 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 127
  66. 168 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 3000
  67. 169 Unknown_Attribute 0x0000 096 096 050 Old_age Offline - 96
  68. 192 Power-Off_Retract_Count 0x0000 100 100 050 Old_age Offline - 308
  69. 194 Temperature_Celsius 0x0000 100 100 050 Old_age Offline - 40
  70. 195 Hardware_ECC_Recovered 0x0000 100 100 050 Old_age Offline - 0
  71. 196 Reallocated_Event_Count 0x0000 100 100 050 Old_age Offline - 0
  72. 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
  73. 241 Total_LBAs_Written 0x0000 100 100 050 Old_age Offline - 385699
  74. 242 Total_LBAs_Read 0x0000 100 100 050 Old_age Offline - 233510
  75. 245 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 481916
  76.  
  77. SMART Error Log Version: 1
  78. No Errors Logged
  79.  
  80. SMART Self-test log structure revision number 1
  81. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  82.  
  83. Selective Self-tests/Logging not supported
  84.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement