API tools faq
paste
Advertisement
Chrushev

Gargoyle MyNet n750 v1.13.x non working serial output

Chrushev
Jul 1st, 2021
163
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.58 KB | None | 0 0
raw download clone embed print report
  1. FRESET button pressed, force into HTTP server.
  2. GIGA: athrs17_link_up lan port...
  3.  
  4. Emergency web server start......IP is 192.168.1.1
  5.  
  6. Trying eth0
  7. dup 1 speed AUTO(10/100/1000)
  8. Press 'q' to quit.
  9. checksum bad
  10. checksum bad
  11. checksum bad
  12. checksum bad
  13. checksum bad
  14. checksum bad
  15. checksum bad
  16. checksum bad
  17. checksum bad
  18. Post up.htm
  19. verify_seama: data=0x81000000, size=12124200
  20. SEAMA ==========================================
  21. magic : 5ea3a417
  22. meta size : 24 bytes
  23. meta data : signature=wrgnd13_wd_av
  24. image size : 0 bytes
  25. ================================================
  26. SEAMA ==========================================
  27. magic : 5ea3a417
  28. meta size : 36 bytes
  29. meta data : dev=/dev/mtdblock/1
  30. meta data : type=firmware
  31. meta data :
  32. meta data :
  33. image size : 12124100 bytes
  34. checksum : 15A3F96C83249B7B34300D5FA4B4BA35
  35. digest : 15A3F96C83249B7B34300D5FA4B4BA35
  36. Selected !!!
  37. ================================================
  38. (ENV) begin addr=0x9f070000,end=0x9ffeffff
  39. Erase Flash from 0x9f070000 to 0x9ffeffff in Bank # 1
  40. First 0x7 last 0xfe sector size 0x10000
  41.  7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254
  42. Erased 248 sectors
  43. write addr: 9f070000
  44.  
  45. Write runtime image into flash...OK,dest addr=0x9f070000
  46. Upload file OK!
  47.  
  48. U-Boot 1.1.4 (Jan 11 2012 - 20:59:53)
  49.  
  50. SVN revision: 48
  51. Target board: WRG-ND13
  52.  
  53. DRAM:
  54. sri
  55. Wasp 1.1
  56. wasp_ddr_initial_config(255): (32bit) ddr2 init
  57. 64 MB
  58. Top of RAM usable for U-Boot at: 84000000
  59. Reserving 242k for U-Boot at: 83fc0000
  60. Reserving 192k for malloc() at: 83f90000
  61. Reserving 44 Bytes for Board Info at: 83f8ffd4
  62. Reserving 36 Bytes for Global Data at: 83f8ffb0
  63. Reserving 128k for boot params() at: 83f6ffb0
  64. Stack Pointer at: 83f6ff98
  65. Now running in RAM - U-Boot at: 83fc0000
  66. id read 0x100000ff
  67. flash size 16 MB, sector count = 256
  68. Flash: 16 MB
  69. pci_init_board: PCIe PLL not set for 40MHz refclk
  70. In: serial
  71. Out: serial
  72. Err: serial
  73. Net: ag934x_enet_initialize...
  74. wasp reset mask:c03300
  75. WASP ----> S17 PHY *
  76. : cfg1 0x7 cfg2 0x7114
  77. eth0: MAC - HIDDEN FROM LOG!!!!!!!!!
  78. athrs17_reg_init: complete
  79. GIGA: athrs17_link_down all port...
  80. eth0 up
  81. eth0
  82. Hit any key to stop autoboot: 1  0
  83. ## Booting image at 9f070000 ...
  84. Verifying Checksum ...
  85. Uncompressing SEAMA linux.lzma ... OK
  86. do_boot_linux entry = 80002000
  87. ## Transferring control to Linux (at address 00000000) ...
  88. ## Giving linux memsize in bytes, 67108864
  89.  
  90. Starting kernel ...
  91.  
  92. [ 0.000000] Linux version 4.14.229 (user@svr18) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0+11333-cc0b70467d)) #0 Fri Apr 9 13:43:38 2021
  93. [ 0.000000] bootconsole [early0] enabled
  94. [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
  95. [ 0.000000] MIPS: machine is Western Digital My Net N750
  96. [ 0.000000] SoC: Atheros AR9344 rev 1
  97. [ 0.000000] Determined physical RAM map:
  98. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  99. [ 0.000000] Initrd not found or empty - disabling initrd
  100. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  101. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  102. [ 0.000000] Zone ranges:
  103. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  104. [ 0.000000] Movable zone start for each node
  105. [ 0.000000] Early memory node ranges
  106. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  107. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  108. [ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x484 with crng_init=0
  109. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  110. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  111. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  112. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  113. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  114. [ 0.000000] Writing ErrCtl register=00000000
  115. [ 0.000000] Readback ErrCtl register=00000000
  116. [ 0.000000] Memory: 58080K/65536K available (3909K kernel code, 151K rwdata, 932K rodata, 1204K init, 204K bss, 7456K reserved, 0K cma-reserved)
  117. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  118. [ 0.000000] NR_IRQS: 51
  119. [ 0.000000] CPU clock: 560.000 MHz
  120. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
  121. [ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
  122. [ 0.008311] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
  123. [ 0.084948] pid_max: default: 32768 minimum: 301
  124. [ 0.090061] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  125. [ 0.097118] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  126. [ 0.108838] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  127. [ 0.119331] futex hash table entries: 256 (order: -1, 3072 bytes)
  128. [ 0.125887] pinctrl core: initialized pinctrl subsystem
  129. [ 0.132355] NET: Registered protocol family 16
  130. [ 0.142837] GPIO line 15 (mynet-n750:ext:lna0) hogged as output/high
  131. [ 0.149609] GPIO line 18 (mynet-n750:ext:lna1) hogged as output/high
  132. [ 0.158199] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  133. [ 0.164700] MEM 0x0000000010000000..0x0000000013ffffff
  134. [ 0.170296] IO 0x0000000000000000..0x0000000000000000
  135. [ 0.191817] PCI host bridge to bus 0000:00
  136. [ 0.196190] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  137. [ 0.203549] pci_bus 0000:00: root bus resource [io 0x0000]
  138. [ 0.209480] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  139. [ 0.216718] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  140. [ 0.225649] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
  141. [ 0.233483] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
  142. [ 0.243685] clocksource: Switched to clocksource MIPS
  143. [ 0.250049] NET: Registered protocol family 2
  144. [ 0.255507] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  145. [ 0.262934] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  146. [ 0.269747] TCP: Hash tables configured (established 1024 bind 1024)
  147. [ 0.276647] UDP hash table entries: 256 (order: 0, 4096 bytes)
  148. [ 0.282872] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  149. [ 0.289793] NET: Registered protocol family 1
  150. [ 0.297284] Crashlog allocated RAM at address 0x3f00000
  151. [ 0.304145] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  152. [ 0.315847] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  153. [ 0.322052] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  154. [ 0.341380] io scheduler noop registered
  155. [ 0.345599] io scheduler deadline registered (default)
  156. [ 0.351400] ar7200-usb-phy usb-phy: phy reset is missing
  157. [ 0.359150] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
  158. [ 0.367533] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  159. [ 0.375042] console [ttyS0] disabled
  160. [ 0.378880] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
  161. [ 0.388098] console [ttyS0] enabled
  162. [ 0.388098] console [ttyS0] enabled
  163. [ 0.395527] bootconsole [early0] disabled
  164. [ 0.395527] bootconsole [early0] disabled
  165. [ 0.419547] m25p80 spi0.0: w25q128 (16384 Kbytes)
  166. [ 0.424398] 6 fixed-partitions partitions found on MTD device spi0.0
  167. [ 0.430843] Creating 6 MTD partitions on "spi0.0":
  168. [ 0.435733] 0x000000000000-0x000000040000 : "bootloader"
  169. [ 0.441921] 0x000000040000-0x000000050000 : "bdcfg"
  170. [ 0.447672] 0x000000050000-0x000000060000 : "devdata"
  171. [ 0.453529] 0x000000060000-0x000000070000 : "devconf"
  172. [ 0.459476] 0x000000070000-0x000000ff0000 : "firmware"
  173. [ 0.465709] 2 seama-fw partitions found on MTD device firmware
  174. [ 0.471632] Creating 2 MTD partitions on "firmware":
  175. [ 0.476721] 0x000000000040-0x0000001a0000 : "kernel"
  176. [ 0.482494] 0x0000001a0000-0x000000f80000 : "rootfs"
  177. [ 0.488259] mtd: device 6 (rootfs) set to be root filesystem
  178. [ 0.494083] 1 squashfs-split partitions found on MTD device rootfs
  179. [ 0.500365] 0x000000b90000-0x000000f80000 : "rootfs_data"
  180. [ 0.506607] 0x000000ff0000-0x000001000000 : "art"
  181. [ 0.513202] libphy: Fixed MDIO Bus: probed
  182. [ 0.519643] ag71xx 19000000.eth: invalid MAC address, using random address
  183. [ 0.865477] libphy: ag71xx_mdio: probed
  184. [ 0.871063] switch0: Atheros AR8327 rev. 2 switch registered on mdio-bus.0
  185. [ 1.523880] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  186. [ 1.533549] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
  187. [ 1.542026] NET: Registered protocol family 10
  188. [ 1.551138] Segment Routing with IPv6
  189. [ 1.555014] NET: Registered protocol family 17
  190. [ 1.559571] 8021q: 802.1Q VLAN Support v1.8
  191. [ 1.570339] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
  192. [ 1.582708] Freeing unused kernel memory: 1204K
  193. [ 1.587335] This architecture does not have kernel memory protection.
  194. [ 2.312768] init: Console is alive
  195. [ 2.316494] init: - watchdog -
  196. [ 2.513702] random: fast init done
  197. [ 5.229391] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  198. [ 5.516528] usbcore: registered new interface driver usbfs
  199. [ 5.522162] usbcore: registered new interface driver hub
  200. [ 5.527689] usbcore: registered new device driver usb
  201. [ 5.568891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  202. [ 5.585401] SCSI subsystem initialized
  203. [ 5.595338] ehci-platform: EHCI generic platform driver
  204. [ 5.600922] ehci-platform 1b000000.usb: EHCI Host Controller
  205. [ 5.606747] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  206. [ 5.614792] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
  207. [ 5.643714] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  208. [ 5.650815] hub 1-0:1.0: USB hub found
  209. [ 5.655044] hub 1-0:1.0: 1 port detected
  210. [ 5.664668] usbcore: registered new interface driver usb-storage
  211. [ 5.673597] usbcore: registered new interface driver uas
  212. [ 5.679831] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  213. [ 5.697618] init: - preinit -
  214. [ 6.205897] usb 1-1: new high-speed USB device number 2 using ehci-platform
  215. [ 6.462618] random: procd: uninitialized urandom read (4 bytes read)
  216. [ 6.469533] hub 1-1:1.0: USB hub found
  217. [ 6.475285] hub 1-1:1.0: 4 ports detected
  218. [ 6.887999] random: jshn: uninitialized urandom read (4 bytes read)
  219. [ 7.117836] random: jshn: uninitialized urandom read (4 bytes read)
  220. [ 7.522664] random: jshn: uninitialized urandom read (4 bytes read)
  221. [ 7.588789] random: jshn: uninitialized urandom read (4 bytes read)
  222. [ 7.684216] random: jshn: uninitialized urandom read (4 bytes read)
  223. [ 8.990909] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  224. [ 8.996956] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  225. Press the [f] key and hit [enter] to enter failsafe mode
  226. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  227. [ 10.034837] eth0: link up (1000Mbps/Full duplex)
  228. [ 10.039549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  229. [ 10.046377] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  230. [ 12.299355] mount_root: loading kmods from internal overlay
  231. [ 12.401490] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  232. [ 12.410187] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  233. [ 13.049578] block: attempting to load /etc/config/fstab
  234. [ 13.060596] block: unable to load configuration (fstab: Entry not found)
  235. [ 13.067545] block: no usable configuration
  236. [ 13.072515] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  237. [ 13.173482] urandom-seed: Seed file not found (/etc/urandom.seed)
  238. [ 13.283933] eth0: link down
  239. [ 13.305683] procd: - early -
  240. [ 13.308712] procd: - watchdog -
  241. [ 13.984346] procd: - watchdog -
  242. [ 13.987854] procd: - ubus -
  243. [ 14.109268] urandom_read: 2 callbacks suppressed
  244. [ 14.109276] random: jshn: uninitialized urandom read (4 bytes read)
  245. [ 14.347777] random: ubusd: uninitialized urandom read (4 bytes read)
  246. [ 14.468986] procd: - init -
  247. Please press Enter to activate this console.
  248. [ 16.162904] kmodloader: loading kernel modules from /etc/modules.d/*
  249. [ 16.387039] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
  250. [ 16.467592] Key type dns_resolver registered
  251. [ 16.564532] RPC: Registered named UNIX socket transport module.
  252. [ 16.570545] RPC: Registered udp transport module.
  253. [ 16.575361] RPC: Registered tcp transport module.
  254. [ 16.580127] RPC: Registered tcp NFSv4.1 backchannel transport module.
  255. [ 16.602237] urngd: v1.0.2 started.
  256. [ 16.679160] tun: Universal TUN/TAP device driver, 1.6
  257. [ 16.745400] gre: GRE over IPv4 demultiplexor driver
  258. [ 16.770673] ip_gre: GRE over IPv4 tunneling driver
  259. [ 16.879076] Installing knfsd (copyright (C) 1996 [email protected]).
  260. [ 16.954211] NFS: Registering the id_resolver key type
  261. [ 16.959376] Key type id_resolver registered
  262. [ 16.963615] Key type id_legacy registered
  263. [ 17.035940] ip6_tables: (C) 2000-2006 Netfilter Core Team
  264. [ 17.081278] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  265. [ 17.160914] random: crng init done
  266. [ 17.587710] Netfilter messages via NETLINK v0.30.
  267. [ 17.608484] ip_set: protocol 6
  268. [ 17.905265] Linux video capture interface: v2.00
  269. [ 18.065181] Mirror/redirect action on
  270. [ 18.105395] u32 classifier
  271. [ 18.108151] input device check on
  272. [ 18.111862] Actions configured
  273. [ 18.195290] GACT probability on
  274. [ 18.218756] Simple TC action Loaded
  275. [ 18.322555] fuse init (API version 7.26)
  276. [ 18.365225] usbcore: registered new interface driver cdc_acm
  277. [ 18.370973] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  278. [ 18.432293] usbcore: registered new interface driver cdc_wdm
  279. [ 18.451363] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
  280. [ 18.459186] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
  281. [ 18.537123] Ebtables v2.0 registered
  282. [ 18.588987] ip_tables: (C) 2000-2006 Netfilter Core Team
  283. [ 19.415677] usbcore: registered new interface driver ums-alauda
  284. [ 19.458517] usbcore: registered new interface driver ums-cypress
  285. [ 19.497113] usbcore: registered new interface driver ums-datafab
  286. [ 19.526646] usbcore: registered new interface driver ums-freecom
  287. [ 19.557021] usbcore: registered new interface driver ums-isd200
  288. [ 19.577358] usbcore: registered new interface driver ums-jumpshot
  289. [ 19.606723] usbcore: registered new interface driver ums-karma
  290. [ 19.638344] usbcore: registered new interface driver ums-sddr09
  291. [ 19.667101] usbcore: registered new interface driver ums-sddr55
  292. [ 19.690853] usbcore: registered new interface driver ums-usbat
  293. [ 19.728521] usbcore: registered new interface driver usblp
  294. [ 19.804842] usbcore: registered new interface driver usbserial
  295. [ 19.810845] usbcore: registered new interface driver usbserial_generic
  296. [ 19.817592] usbserial: USB Serial support registered for generic
  297. [ 19.940351] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
  298. [ 19.948966] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  299. [ 20.178368] xt_time: kernel timezone is -0000
  300. [ 20.206077] usbcore: registered new interface driver cdc_ether
  301. [ 20.251263] usbcore: registered new interface driver cdc_ncm
  302. [ 20.504226] gspca_main: v2.14.0 registered
  303. [ 20.534009] usbcore: registered new interface driver ov534
  304. [ 20.568251] usbcore: registered new interface driver gspca_zc3xx
  305. [ 20.590469] usbcore: registered new interface driver huawei_cdc_ncm
  306. [ 20.819742] PPP generic driver version 2.4.2
  307. [ 20.836686] NET: Registered protocol family 24
  308. [ 20.855497] PPTP driver version 0.8.5
  309. [ 20.867894] usbcore: registered new interface driver qmi_wwan
  310. [ 20.888529] usbcore: registered new interface driver rndis_host
  311. [ 20.904637] usbcore: registered new interface driver sierra
  312. [ 20.910382] usbserial: USB Serial support registered for Sierra USB modem
  313. [ 20.936235] usbcore: registered new interface driver sierra_net
  314. [ 20.985772] usbcore: registered new interface driver uvcvideo
  315. [ 20.991611] USB Video Class driver (1.1.1)
  316. [ 21.137173] usbcore: registered new interface driver cdc_mbim
  317. [ 21.154554] usbcore: registered new interface driver option
  318. [ 21.160289] usbserial: USB Serial support registered for GSM modem (1-port)
  319. [ 21.185582] usbcore: registered new interface driver qcserial
  320. [ 21.191497] usbserial: USB Serial support registered for Qualcomm USB modem
  321. [ 21.236497] ath9k 18100000.wmac: Direct firmware load for ath9k-eeprom-ahb-18100000.wmac.bin failed with error -2
  322. [ 21.246960] ath9k 18100000.wmac: Falling back to user helper
  323. [ 22.240562] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=12
  324. [ 22.247662] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  325. [ 22.257781] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
  326. [ 22.268080] ath9k 0000:00:00.0: Falling back to user helper
  327. [ 23.140459] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=14
  328. [ 23.173580] kmodloader: done loading kernel modules from /etc/modules.d/*
  329. [ 67.528053] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  330. [ 67.535183] eth0: link up (1000Mbps/Full duplex)
  331. [ 67.539885] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  332. [ 67.567296] device eth0 entered promiscuous mode
  333. [ 67.572652] br-lan: port 1(eth0.1) entered blocking state
  334. [ 67.578197] br-lan: port 1(eth0.1) entered disabled state
  335. [ 67.583993] device eth0.1 entered promiscuous mode
  336. [ 67.607035] br-lan: port 1(eth0.1) entered blocking state
  337. [ 67.612522] br-lan: port 1(eth0.1) entered forwarding state
  338. [ 67.618398] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  339. [ 68.641910] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  340. [ 108.231186] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  341. [ 108.244031] jffs2_build_filesystem(): unlocking the mtd device...
  342. [ 108.244087] done.
  343.  
  344.  
  345.  
  346.  
  347.  
  348. BusyBox v1.30.1 () built-in shell (ash)
  349.  
  350.  
  351.  
  352. ------------------------------------------------------------------
  353. | _____ _ |
  354. | | __ \ | | |
  355. | | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
  356. | | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
  357. | | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
  358. | \____/\__,_|_| \__, |\___/ \__, |_|\___| |
  359. | __/ | __/ | |
  360. | |___/ |___/ |
  361. | |
  362. |----------------------------------------------------------------|
  363. | Gargoyle version 1.13.X | OpenWrt 19.07 branch |
  364. | Gargoyle revision 600bef8e| OpenWrt commit cc0b704 |
  365. | Built April 23, 2021 | Target ath79/usb_large |
  366. ------------------------------------------------------------------
  367.  
  368. root@Gargoyle:/#
  369. root@Gargoyle:/#
  370. root@Gargoyle:/#
  371. root@Gargoyle:/#
  372. root@Gargoyle:/#
  373. root@Gargoyle:/# [ 108.252306] jffs2_build_filesystem(): erasing all blocks after the end marker...
  374. [ 117.043881] done.
  375. [ 117.053450] jffs2: notice: (5023) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  376. [ 118.319599] overlayfs: upper fs does not support tmpfile.
  377.  
  378. root@Gargoyle:/#
  379. root@Gargoyle:/#
  380. root@Gargoyle:/# echo power cycling here
  381. power cycling here
  382. root@Gargoyle:/#
  383. root@Gargoyle:/#
  384. root@Gargoyle:/#
  385. root@Gargoyle:/#
  386. root@Gargoyle:/#
  387. root@Gargoyle:/#
  388. root@Gargoyle:/#  D8Ððÿÿ¿ÿÿÿÿÿÿÿÿÿÿÿÿÿøÿ[D’
  389.  
  390.  
  391. U-Boot 1.1.4 (Jan 11 2012 - 20:59:53)
  392.  
  393. SVN revision: 48
  394. Target board: WRG-ND13
  395.  
  396. DRAM:
  397. sri
  398. Wasp 1.1
  399. wasp_ddr_initial_config(255): (32bit) ddr2 init
  400. 64 MB
  401. Top of RAM usable for U-Boot at: 84000000
  402. Reserving 242k for U-Boot at: 83fc0000
  403. Reserving 192k for malloc() at: 83f90000
  404. Reserving 44 Bytes for Board Info at: 83f8ffd4
  405. Reserving 36 Bytes for Global Data at: 83f8ffb0
  406. Reserving 128k for boot params() at: 83f6ffb0
  407. Stack Pointer at: 83f6ff98
  408. Now running in RAM - U-Boot at: 83fc0000
  409. id read 0x100000ff
  410. flash size 16 MB, sector count = 256
  411. Flash: 16 MB
  412.  D ðÿïÿ¿ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿøßw{‘¨
  413.  
  414. U-Boot 1.1.4 (Jan 11 2012 - 20:59:53)
  415.  
  416. SVN revision: 48
  417. Target board: WRG-ND13
  418.  
  419. DRAM:
  420. sri
  421. Wasp 1.1
  422. wasp_ddr_initial_config(255): (32bit) ddr2 init
  423. 64 MB
  424. Top of RAM usable for U-Boot at: 84000000
  425. Reserving 242k for U-Boot at: 83fc0000
  426. Reserving 192k for malloc() at: 83f90000
  427. Reserving 44 Bytes for Board Info at: 83f8ffd4
  428. Reserving 36 Bytes for Global Data at: 83f8ffb0
  429. Reserving 128k for boot params() at: 83f6ffb0
  430. Stack Pointer at: 83f6ff98
  431. Now running in RAM - U-Boot at: 83fc0000
  432. id read 0x100000ff
  433. flash size 16 MB, sector count = 256
  434. Flash: 16 MB
  435. pci_init_board: PCIe PLL not set for 40MHz refclk
  436. In: serial
  437. Out: serial
  438. Err: serial
  439. Net: ag934x_enet_initialize...
  440. wasp reset mask:c03300
  441. WASP ----> S17 PHY *
  442. : cfg1 0x7 cfg2 0x7114
  443. eth0: MAC - HIDDEN FROM LOG!!!!!!!!!
  444. athrs17_reg_init: complete
  445. GIGA: athrs17_link_down all port...
  446. eth0 up
  447. eth0
  448. Hit any key to stop autoboot: 1  0
  449. ## Booting image at 9f070000 ...
  450. Verifying Checksum ...
  451. csum:
  452. £ùlƒ$›{40
  453. _¤´º5
  454. afterMD5_we_get_digest:
  455. I=ciû÷õ1˜Íþ§;A
  456. Bad Header Checksum.
  457. GIGA: athrs17_link_up lan port...
  458. ar7240>
  459.  
  460. ar7240>
  461.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!