04-FastLED with Arduino Tutorial Introduction - How to Code for RGB LED Strips (WS2812B)

//from Dave's Garage YouTube video https://youtu.be/aub9PecrbuM

#include <Arduino.h>
//#include <U8g2lib.h>
#define FASTLED_INTERNAL
#include <FastLED.h>

//#define OLED_CLOCK  15          // Pins for the OLED display
//#define OLED_DATA   4
//#define OLED_RESET  16

#define NUM_LEDS    150          // FastLED definitions
#define LED_PIN     16

CRGB g_LEDs[NUM_LEDS] = {0};    // Frame buffer for FastLED

//U8G2_SSD1306_128X64_NONAME_F_HW_I2C g_OLED(U8G2_R2, OLED_RESET, OLED_CLOCK, OLED_DATA);
//int g_lineHeight = 0;

// FramesPerSecond
//
// Tracks a weighted average to smooth out the values that it calcs as the simple reciprocal
// of the amount of time taken specified by the caller.  So 1/3 of a second is 3 fps, and it
// will take up to 10 frames or so to stabilize on that value.

double FramesPerSecond(double seconds)
{
  static double framesPerSecond;
  framesPerSecond = (framesPerSecond * .9) + (1.0 / seconds * .1);
  return framesPerSecond;
}

void setup()
{
  pinMode(LED_BUILTIN, OUTPUT);
  pinMode(LED_PIN, OUTPUT);

  Serial.begin(115200);
  while (!Serial) { }
  Serial.println("ESP32 Startup");

//  g_OLED.begin();
//  g_OLED.clear();
//  g_OLED.setFont(u8g2_font_profont15_tf);
//  g_lineHeight = g_OLED.getFontAscent() - g_OLED.getFontDescent();        // Descent is a negative number so we add it to the total

  FastLED.addLeds<WS2812B, LED_PIN, GRB>(g_LEDs, NUM_LEDS);               // Add our LED strip to the FastLED library
  FastLED.setBrightness(200);
}

void loop()
{
  bool bLED = 0;
  double fps = 0;

  uint8_t initialHue = 0;
  const uint8_t deltaHue = 16;
  const uint8_t hueDensity = 4;

  for (;;)
  {
    bLED = !bLED;                                                         // Blink the LED off and on
    digitalWrite(LED_BUILTIN, bLED);

    double dStart = millis() / 1000.0;                                    // Display a frame and calc how long it takes

    // Handle OLED drawing

    //g_OLED.clearBuffer();
    //g_OLED.setCursor(0, g_lineHeight);
    //g_OLED.printf("FPS: %.1lf", fps);
    //g_OLED.sendBuffer();

    // Handle LEDs

    fill_rainbow(g_LEDs, NUM_LEDS, initialHue += hueDensity, deltaHue);

    FastLED.show();

    double dEnd = millis() / 1000.0;
    fps = FramesPerSecond(dEnd - dStart);
  }
}