API tools faq
paste
Guest User

Untitled

a guest
Jun 5th, 2020
132
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.46 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 5.7.0-sunxi (kamil@kamil-desktop) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2), GNU ld (GNU Binutils for Ubuntu) 2.33) #2 SMP Fri Jun 5 21:31:12 CEST 2020
  3. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Q8 A33 Tablet
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] cma: Reserved 128 MiB at 0x76c00000
  9. [ 0.000000] On node 0 totalpages: 261144
  10. [ 0.000000] Normal zone: 1728 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
  13. [ 0.000000] HighMem zone: 64536 pages, LIFO batch:15
  14. [ 0.000000] psci: probing for conduit method from DT.
  15. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  16. [ 0.000000] percpu: Embedded 15 pages/cpu s30988 r8192 d22260 u61440
  17. [ 0.000000] pcpu-alloc: s30988 r8192 d22260 u61440 alloc=15*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259416
  20. [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p2 rootwait panic=10
  21. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  22. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  23. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  24. [ 0.000000] Memory: 889020K/1044576K available (8192K kernel code, 530K rwdata, 2092K rodata, 2048K init, 262K bss, 24484K reserved, 131072K cma-reserved, 127060K highmem)
  25. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  26. [ 0.000000] rcu: Hierarchical RCU implementation.
  27. [ 0.000000] rcu: RCU event tracing is enabled.
  28. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  29. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  30. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  31. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  32. [ 0.000000] GIC: Using split EOI/Deactivate mode
  33. [ 0.000000] random: get_random_bytes called from start_kernel+0x308/0x4bc with crng_init=0
  34. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  35. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  36. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  37. [ 0.000018] Switching to timer-based delay loop, resolution 41ns
  38. [ 0.000246] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  39. [ 0.000728] Console: colour dummy device 80x30
  40. [ 0.000784] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  41. [ 0.000797] pid_max: default: 32768 minimum: 301
  42. [ 0.000989] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  43. [ 0.001008] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  44. [ 0.001976] CPU: Testing write buffer coherency: ok
  45. [ 0.002374] /cpus/cpu@0 missing clock-frequency property
  46. [ 0.002394] /cpus/cpu@1 missing clock-frequency property
  47. [ 0.002410] /cpus/cpu@2 missing clock-frequency property
  48. [ 0.002428] /cpus/cpu@3 missing clock-frequency property
  49. [ 0.002440] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  50. [ 0.003059] Setting up static identity map for 0x40100000 - 0x40100060
  51. [ 0.003197] rcu: Hierarchical SRCU implementation.
  52. [ 0.003776] smp: Bringing up secondary CPUs ...
  53. [ 0.004639] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  54. [ 0.005617] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  55. [ 0.006521] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  56. [ 0.006619] smp: Brought up 1 node, 4 CPUs
  57. [ 0.006641] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  58. [ 0.006647] CPU: All CPU(s) started in HYP mode.
  59. [ 0.006652] CPU: Virtualization extensions available.
  60. [ 0.007502] devtmpfs: initialized
  61. [ 0.013506] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  62. [ 0.013765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  63. [ 0.013791] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  64. [ 0.018669] pinctrl core: initialized pinctrl subsystem
  65. [ 0.019383] thermal_sys: Registered thermal governor 'step_wise'
  66. [ 0.020698] NET: Registered protocol family 16
  67. [ 0.022167] DMA: preallocated 256 KiB pool for atomic coherent allocations
  68. [ 0.023320] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  69. [ 0.023332] hw-breakpoint: maximum watchpoint size is 8 bytes.
  70. [ 0.042418] SCSI subsystem initialized
  71. [ 0.042802] libata version 3.00 loaded.
  72. [ 0.043063] usbcore: registered new interface driver usbfs
  73. [ 0.043110] usbcore: registered new interface driver hub
  74. [ 0.043174] usbcore: registered new device driver usb
  75. [ 0.043435] pps_core: LinuxPPS API ver. 1 registered
  76. [ 0.043443] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  77. [ 0.043463] PTP clock support registered
  78. [ 0.043696] Advanced Linux Sound Architecture Driver Initialized.
  79. [ 0.045012] clocksource: Switched to clocksource arch_sys_counter
  80. [ 0.053244] NET: Registered protocol family 2
  81. [ 0.053803] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  82. [ 0.053837] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  83. [ 0.053910] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  84. [ 0.054025] TCP: Hash tables configured (established 8192 bind 8192)
  85. [ 0.054196] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  86. [ 0.054275] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  87. [ 0.054531] NET: Registered protocol family 1
  88. [ 0.055207] RPC: Registered named UNIX socket transport module.
  89. [ 0.055221] RPC: Registered udp transport module.
  90. [ 0.055227] RPC: Registered tcp transport module.
  91. [ 0.055232] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [ 0.104048] Initialise system trusted keyrings
  93. [ 0.104422] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  94. [ 0.112965] NFS: Registering the id_resolver key type
  95. [ 0.113015] Key type id_resolver registered
  96. [ 0.113022] Key type id_legacy registered
  97. [ 0.113039] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  98. [ 0.113464] Key type asymmetric registered
  99. [ 0.113476] Asymmetric key parser 'x509' registered
  100. [ 0.113531] bounce: pool size: 64 pages
  101. [ 0.113575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  102. [ 0.113586] io scheduler mq-deadline registered
  103. [ 0.113594] io scheduler kyber registered
  104. [ 0.114453] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
  105. [ 0.115972] sun8i-a23-r-pinctrl 1f02c00.pinctrl: Reset controller missing
  106. [ 0.118841] sun8i-a33-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  107. [ 0.119747] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
  108. [ 0.128045] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  109. [ 0.131200] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  110. [ 0.133026] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply
  111. [ 0.143584] loop: module loaded
  112. [ 0.146749] libphy: Fixed MDIO Bus: probed
  113. [ 0.146764] tun: Universal TUN/TAP device driver, 1.6
  114. [ 0.147012] CAN device driver interface
  115. [ 0.147898] usbcore: registered new interface driver asix
  116. [ 0.147963] usbcore: registered new interface driver ax88179_178a
  117. [ 0.147999] usbcore: registered new interface driver cdc_ether
  118. [ 0.148032] usbcore: registered new interface driver net1080
  119. [ 0.148065] usbcore: registered new interface driver cdc_subset
  120. [ 0.148096] usbcore: registered new interface driver zaurus
  121. [ 0.148150] usbcore: registered new interface driver cdc_ncm
  122. [ 0.148242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  123. [ 0.148250] ehci-platform: EHCI generic platform driver
  124. [ 0.148601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  125. [ 0.148628] ohci-platform: OHCI generic platform driver
  126. [ 0.148944] usbcore: registered new interface driver usb-storage
  127. [ 0.149884] input: 1c22800.lradc as /devices/platform/soc/1c22800.lradc/input/input0
  128. [ 0.151355] sun6i-rtc 1f00000.rtc: registered as rtc0
  129. [ 0.151420] sun6i-rtc 1f00000.rtc: setting system clock to 2020-06-05T20:18:36 UTC (1591388316)
  130. [ 0.151430] sun6i-rtc 1f00000.rtc: RTC enabled
  131. [ 0.151733] i2c /dev entries driver
  132. [ 0.154368] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  133. [ 0.154877] sdhci: Secure Digital Host Controller Interface driver
  134. [ 0.154887] sdhci: Copyright(c) Pierre Ossman
  135. [ 0.155147] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
  136. [ 0.155591] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
  137. [ 0.156336] sun4i-ss 1c15000.crypto-engine: Die ID 5
  138. [ 0.158687] hid: raw HID events driver (C) Jiri Kosina
  139. [ 0.159252] usbcore: registered new interface driver usbhid
  140. [ 0.159259] usbhid: USB HID core driver
  141. [ 0.163546] NET: Registered protocol family 10
  142. [ 0.164466] Segment Routing with IPv6
  143. [ 0.164581] NET: Registered protocol family 17
  144. [ 0.164629] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  145. [ 0.164637] can: controller area network core (rev 20170425 abi 9)
  146. [ 0.164707] NET: Registered protocol family 29
  147. [ 0.164716] can: raw protocol (rev 20170425)
  148. [ 0.164724] can: broadcast manager protocol (rev 20170425 t)
  149. [ 0.164735] can: netlink gateway (rev 20190810) max_hops=1
  150. [ 0.164956] Key type dns_resolver registered
  151. [ 0.165187] Registering SWP/SWPB emulation handler
  152. [ 0.165258] Loading compiled-in X.509 certificates
  153. [ 0.177378] sun8i-a23-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  154. [ 0.177661] sun8i-a23-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
  155. [ 0.178264] printk: console [ttyS0] disabled
  156. [ 0.178346] 1f02800.serial: ttyS0 at MMIO 0x1f02800 (irq = 49, base_baud = 1500000) is a 16550A
  157. [ 1.115539] printk: console [ttyS0] enabled
  158. [ 1.120547] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  159. [ 1.129936] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply
  160. [ 1.138217] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
  161. [ 1.147393] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
  162. [ 1.156830] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
  163. [ 1.162969] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP223 found
  164. [ 1.170944] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input1
  165. [ 1.181856] axp20x-adc axp22x-adc: DMA mask not set
  166. [ 1.187442] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
  167. [ 1.196058] dcdc1: supplied by regulator-dummy
  168. [ 1.200863] dcdc2: supplied by regulator-dummy
  169. [ 1.205638] dcdc3: supplied by regulator-dummy
  170. [ 1.210364] dcdc4: supplied by regulator-dummy
  171. [ 1.215097] dcdc5: supplied by regulator-dummy
  172. [ 1.219853] dc1sw: supplied by vcc-3v0
  173. [ 1.223801] dc5ldo: supplied by vcc-dram
  174. [ 1.228150] aldo1: supplied by regulator-dummy
  175. [ 1.232970] aldo2: supplied by regulator-dummy
  176. [ 1.237802] aldo3: supplied by regulator-dummy
  177. [ 1.242623] eldo1: supplied by vcc-3v0
  178. [ 1.246772] eldo2: supplied by vcc-3v0
  179. [ 1.250889] eldo3: supplied by vcc-3v0
  180. [ 1.254998] dldo1: supplied by regulator-dummy
  181. [ 1.259723] dldo2: supplied by regulator-dummy
  182. [ 1.264416] dldo3: supplied by regulator-dummy
  183. [ 1.269151] dldo4: supplied by regulator-dummy
  184. [ 1.273865] rtc_ldo: supplied by regulator-dummy
  185. [ 1.278701] ldo_io0: supplied by regulator-dummy
  186. [ 1.283593] ldo_io1: supplied by regulator-dummy
  187. [ 1.288303] vcc-touchscreen: Bringing 3800000uV into 3300000-3300000uV
  188. [ 1.295157] drivevbus: supplied by vcc5v0
  189. [ 1.299811] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set
  190. [ 1.308296] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
  191. [ 1.316456] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
  192. [ 1.323202] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  193. [ 1.333490] ehci-platform 1c1a000.usb: EHCI Host Controller
  194. [ 1.339172] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  195. [ 1.347852] ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
  196. [ 1.374989] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  197. [ 1.381321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  198. [ 1.389605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  199. [ 1.396837] usb usb1: Product: EHCI Host Controller
  200. [ 1.401712] usb usb1: Manufacturer: Linux 5.7.0-sunxi ehci_hcd
  201. [ 1.407554] usb usb1: SerialNumber: 1c1a000.usb
  202. [ 1.412710] hub 1-0:1.0: USB hub found
  203. [ 1.416523] hub 1-0:1.0: 1 port detected
  204. [ 1.421319] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  205. [ 1.427977] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  206. [ 1.435912] ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
  207. [ 1.509227] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07
  208. [ 1.517510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  209. [ 1.524725] usb usb2: Product: Generic Platform OHCI controller
  210. [ 1.530655] usb usb2: Manufacturer: Linux 5.7.0-sunxi ohci_hcd
  211. [ 1.536496] usb usb2: SerialNumber: 1c1a400.usb
  212. [ 1.542136] hub 2-0:1.0: USB hub found
  213. [ 1.545945] hub 2-0:1.0: 1 port detected
  214. [ 1.550820] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator
  215. [ 1.560289] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver
  216. [ 1.566077] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 3
  217. [ 1.574195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  218. [ 1.582477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  219. [ 1.589704] usb usb3: Product: MUSB HDRC host driver
  220. [ 1.594665] usb usb3: Manufacturer: Linux 5.7.0-sunxi musb-hcd
  221. [ 1.600506] usb usb3: SerialNumber: musb-hdrc.2.auto
  222. [ 1.605989] hub 3-0:1.0: USB hub found
  223. [ 1.609789] hub 3-0:1.0: 1 port detected
  224. [ 1.617066] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
  225. [ 1.626498] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
  226. [ 1.635177] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  227. [ 1.675620] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
  228. [ 1.683630] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
  229. [ 1.693464] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
  230. [ 1.753381] mmc0: host does not support reading read-only switch, assuming write-enable
  231. [ 1.770740] mmc0: new high speed SDHC card at address f83b
  232. [ 1.777303] mmcblk0: mmc0:f83b SU04G 3.69 GiB
  233. [ 1.813862] mmcblk0: p1 p2
  234. [ 1.937423] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
  235. [ 1.954355] simple-framebuffer 7fc18000.framebuffer: framebuffer at 0x7fc18000, 0x3e8000 bytes, mapped to 0x(ptrval)
  236. [ 1.965037] simple-framebuffer 7fc18000.framebuffer: format=x8r8g8b8, mode=800x1280x32, linelength=3200
  237. [ 1.997740] Console: switching to colour frame buffer device 100x80
  238. [ 2.019061] simple-framebuffer 7fc18000.framebuffer: fb0: simplefb registered!
  239. [ 2.026954] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  240. [ 2.036594] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  241. [ 2.046016] ALSA device list:
  242. [ 2.049010] No soundcards found.
  243. [ 2.052494] Warning: unable to open an initial console.
  244. [ 2.060432] Freeing unused kernel memory: 2048K
  245. [ 2.102215] Run /init as init process
  246. [ 2.106096] with arguments:
  247. [ 2.109108] /init
  248. [ 2.111416] with environment:
  249. [ 2.114593] HOME=/
  250. [ 2.117164] TERM=linux
  251. [ 2.182391] [hybris-boot] Hello from the initramfs
  252. [ 4.765872] [hybris-boot] data partition: /dev/mmcblk0p2
  253. [ 4.833226] random: fast init done
  254. [ 4.843754] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  255. [ 4.913572] [hybris-boot] switch_root to /dev/mmcblk0p2
  256. [ 5.679393] [hybris-boot] switch_root done
  257. [ 5.733909] using random self ethernet address
  258. [ 5.739657] using random host ethernet address
  259. [ 5.944362] usb0: HOST MAC 9e:7e:9d:a3:fd:1d
  260. [ 5.948804] usb0: MAC 56:1b:be:60:8d:5e
  261. [ 6.137397] random: init-debug: uninitialized urandom read (4 bytes read)
  262. [ 6.175754] random: init-debug: uninitialized urandom read (4 bytes read)
  263. [ 6.196807] random: init-debug: uninitialized urandom read (4 bytes read)
  264. [ 6.315427] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
  265. [ 7.238106] [hybris-boot] usb_info: Mer Debug telnet on port 2323 on usb0 192.168.2.15 - also running udhcpd
  266. [ 7.374201] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  267. [ 7.424567] preinit: (7.41) Welcome to Sailfish OS 3.3.0.14 (Rokua)
  268. [ 7.438202] preinit: (7.43) "Magic Close" /dev/watchdog with character 'V'
  269. [ 9.133376] preinit: (9.12) is_erase_needed: No : 0
  270. [ 9.267375] preinit: (9.26) get_bootstate: USER : 0
  271. [ 9.273019] preinit: (9.26) BOOTSTATE = USER
  272. [ 9.280248] preinit: (9.27) Booting to default.target
  273. [ 9.678751] random: systemd: uninitialized urandom read (16 bytes read)
  274. [ 9.703625] random: systemd: uninitialized urandom read (16 bytes read)
  275. [ 9.712592] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  276. [ 9.731303] systemd[1]: Detected architecture arm.
  277. [ 9.766999] systemd[1]: Set hostname to <MID08S>.
  278. [ 9.892810] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
  279. [ 10.687017] systemd[1]: Reached target Swap.
  280. [ 10.715592] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  281. [ 10.755365] systemd[1]: Reached target Encrypted Volumes.
  282. [ 10.796075] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  283. [ 10.845152] systemd[1]: Created slice Root Slice.
  284. [ 10.875704] systemd[1]: Listening on Journal Socket.
  285. [ 10.888777] systemd[1]: Listening on udev Control Socket.
  286. [ 11.153920] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  287. [ 13.281696] pwm-backlight backlight: supply power not found, using dummy regulator
  288. [ 13.301934] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  289. [ 13.458176] silead_ts 0-0040: supply avdd not found, using dummy regulator
  290. [ 13.478035] k101_im2ba02_dsi_probe
  291. [ 13.481927] k101_im2ba02_dsi_probe: mipi_dsi_attach ret: -517
  292. [ 13.524564] lima 1c40000.gpu: IRQ ppmmu2 not found
  293. [ 13.529544] lima 1c40000.gpu: IRQ ppmmu3 not found
  294. [ 13.534417] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
  295. [ 13.540994] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
  296. [ 13.547505] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
  297. [ 13.553869] lima 1c40000.gpu: IRQ pp2 not found
  298. [ 13.555403] silead_ts 0-0040: Silead chip ID: 0x80360000
  299. [ 13.558487] lima 1c40000.gpu: IRQ pp3 not found
  300. [ 13.568388] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
  301. [ 13.597723] lima 1c40000.gpu: bus rate = 200000000
  302. [ 13.602548] lima 1c40000.gpu: mod rate = 384000000
  303. [ 13.611936] bmc150_accel_i2c 1-0019: mounting matrix not found: using identity...
  304. [ 13.620526] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
  305. [ 13.630764] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  306. [ 13.642358] k101_im2ba02_dsi_probe
  307. [ 13.646505] k101_im2ba02_dsi_probe: mipi_dsi_attach ret: -517
  308. [ 13.657276] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  309. [ 13.667896] k101_im2ba02_dsi_probe
  310. [ 13.671730] k101_im2ba02_dsi_probe: mipi_dsi_attach ret: -517
  311. [ 13.868431] fuse: init (API version 7.31)
  312. [ 13.980450] systemd-journald[326]: Received request to flush runtime journal from PID 1
  313. [ 13.994401] random: crng init done
  314. [ 13.997826] random: 4 urandom warning(s) missed due to ratelimiting
  315. [ 15.700365] input: silead_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0040/input/input2
  316. [ 15.712364] sun8i-a33-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
  317. [ 15.732243] k101_im2ba02_dsi_probe
  318. [ 15.745004] k101_im2ba02_dsi_probe: mipi_dsi_attach ret: -517
  319. [ 15.931198] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  320. [ 15.939435] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
  321. [ 16.726031] Mass Storage Function, version: 2009/09/11
  322. [ 16.731236] LUN: removable file: (no medium)
  323. [ 16.735897] file system registered
  324. [ 32.475155] vcc3v3: disabling
  325. [ 32.478159] vcc5v0: disabling
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!