API tools faq
paste
Guest User

rk3568-radxa-rock-3a-bootlog

a guest
Oct 26th, 2022
43
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.24 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  2. [ 0.000000] Linux version 6.1.0-rc2 (<redacted>) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.37) #1 SMP PREEMPT Wed Oct 26 09:27:09 CEST 2022
  3. [ 0.000000] Machine model: Radxa ROCK3 Model A
  4. [ 0.000000] efi: UEFI not found.
  5. [ 0.000000] NUMA: No NUMA configuration found
  6. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000a00000-0x000000007fffffff]
  7. [ 0.000000] NUMA: NODE_DATA [mem 0x7fb64100-0x7fb65fff]
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA [mem 0x0000000000a00000-0x000000007fffffff]
  10. [ 0.000000] DMA32 empty
  11. [ 0.000000] Normal empty
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000000a00000-0x000000007fffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000a00000-0x000000007fffffff]
  16. [ 0.000000] On node 0, zone DMA: 2560 pages in unavailable ranges
  17. [ 0.000000] cma: Reserved 32 MiB at 0x000000007ba00000
  18. [ 0.000000] psci: probing for conduit method from DT.
  19. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  20. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  21. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  22. [ 0.000000] psci: SMC Calling Convention v1.2
  23. [ 0.000000] percpu: Embedded 19 pages/cpu s39336 r8192 d30296 u77824
  24. [ 0.000000] pcpu-alloc: s39336 r8192 d30296 u77824 alloc=19*4096
  25. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  26. [ 0.000000] Detected VIPT I-cache on CPU0
  27. [ 0.000000] CPU features: detected: GIC system register CPU interface
  28. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  29. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  30. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  31. [ 0.000000] alternatives: applying boot alternatives
  32. [ 0.000000] Fallback order for Node 0: 0
  33. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513576
  34. [ 0.000000] Policy zone: DMA
  35. [ 0.000000] Kernel command line: console=ttyS2,1500000n8
  36. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  37. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  38. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  39. [ 0.000000] Memory: 1976780K/2086912K available (11648K kernel code, 1108K rwdata, 3720K rodata, 2304K init, 483K bss, 77364K reserved, 32768K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU event tracing is enabled.
  43. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  44. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  45. [ 0.000000] Tracing variant of Tasks RCU enabled.
  46. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  47. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  48. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  49. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  50. [ 0.000000] GICv3: 320 SPIs implemented
  51. [ 0.000000] GICv3: 0 Extended SPIs implemented
  52. [ 0.000000] GICv3: MBI range [296:319]
  53. [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  54. [ 0.000000] Root IRQ handler: gic_handle_irq
  55. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  56. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  57. [ 0.000000] ITS: No ITS available, not enabling LPIs
  58. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  59. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  60. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  61. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  62. [ 0.001304] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  63. [ 0.001324] pid_max: default: 32768 minimum: 301
  64. [ 0.001566] LSM: Security Framework initializing
  65. [ 0.001759] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  66. [ 0.001780] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  67. [ 0.003264] cacheinfo: Unable to detect cache hierarchy for CPU 0
  68. [ 0.004146] cblist_init_generic: Setting adjustable number of callback queues.
  69. [ 0.004159] cblist_init_generic: Setting shift to 2 and lim to 1.
  70. [ 0.004265] cblist_init_generic: Setting shift to 2 and lim to 1.
  71. [ 0.004531] rcu: Hierarchical SRCU implementation.
  72. [ 0.004538] rcu: Max phase no-delay instances is 1000.
  73. [ 0.006181] EFI services will not be available.
  74. [ 0.006583] smp: Bringing up secondary CPUs ...
  75. [ 0.007277] Detected VIPT I-cache on CPU1
  76. [ 0.007382] cacheinfo: Unable to detect cache hierarchy for CPU 1
  77. [ 0.007398] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  78. [ 0.007447] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  79. [ 0.008217] Detected VIPT I-cache on CPU2
  80. [ 0.008311] cacheinfo: Unable to detect cache hierarchy for CPU 2
  81. [ 0.008326] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  82. [ 0.008362] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  83. [ 0.009069] Detected VIPT I-cache on CPU3
  84. [ 0.009162] cacheinfo: Unable to detect cache hierarchy for CPU 3
  85. [ 0.009177] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  86. [ 0.009211] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  87. [ 0.009308] smp: Brought up 1 node, 4 CPUs
  88. [ 0.009318] SMP: Total of 4 processors activated.
  89. [ 0.009325] CPU features: detected: 32-bit EL0 Support
  90. [ 0.009330] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  91. [ 0.009336] CPU features: detected: Common not Private translations
  92. [ 0.009341] CPU features: detected: CRC32 instructions
  93. [ 0.009347] CPU features: detected: RCpc load-acquire (LDAPR)
  94. [ 0.009351] CPU features: detected: LSE atomic instructions
  95. [ 0.009356] CPU features: detected: Privileged Access Never
  96. [ 0.009359] CPU features: detected: RAS Extension Support
  97. [ 0.009365] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  98. [ 0.009446] CPU: All CPU(s) started at EL2
  99. [ 0.009451] alternatives: applying system-wide alternatives
  100. [ 0.013890] devtmpfs: initialized
  101. [ 0.038665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  102. [ 0.038693] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  103. [ 0.039815] pinctrl core: initialized pinctrl subsystem
  104. [ 0.040575] DMI not present or invalid.
  105. [ 0.041453] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  106. [ 0.042729] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  107. [ 0.043111] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  108. [ 0.043343] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  109. [ 0.043458] audit: initializing netlink subsys (disabled)
  110. [ 0.043667] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
  111. [ 0.045972] thermal_sys: Registered thermal governor 'step_wise'
  112. [ 0.045984] thermal_sys: Registered thermal governor 'power_allocator'
  113. [ 0.046048] cpuidle: using governor menu
  114. [ 0.046185] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  115. [ 0.046309] ASID allocator initialised with 65536 entries
  116. [ 0.059414] platform fe070000.dsi: Fixing up cyclic dependency with fe040000.vop
  117. [ 0.060110] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
  118. [ 0.084902] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  119. [ 0.085457] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  120. [ 0.086011] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  121. [ 0.08679] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  122. [ 0.087212] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  123. [ 0.089474] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
  124. [ 0.097933] KASLR disabled due to lack of seed
  125. [ 0.106821] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  126. [ 0.106834] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
  127. [ 0.106842] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  128. [ 0.106847] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
  129. [ 0.106854] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  130. [ 0.106859] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
  131. [ 0.106865] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  132. [ 0.106870] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  133. [ 0.113142] iommu: Default domain type: Translated
  134. [ 0.113155] iommu: DMA domain TLB invalidation policy: strict mode
  135. [ 0.113553] SCSI subsystem initialized
  136. [ 0.113831] usbcore: registered new interface driver usbfs
  137. [ 0.113876] usbcore: registered new interface driver hub
  138. [ 0.113917] usbcore: registered new device driver usb
  139. [ 0.114616] pps_core: LinuxPPS API ver. 1 registered
  140. [ 0.114622] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  141. [ 0.114640] PTP clock support registered
  142. [ 0.114677] EDAC MC: Ver: 3.0.0
  143. [ 0.115372] ARM FF-A: FFA_VERSION returned not supported
  144. [ 0.115532] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
  145. [ 0.115707] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  146. [ 0.115759] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:1)
  147. [ 0.115770] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  148. [ 0.116414] Advanced Linux Sound Architecture Driver Initialized.
  149. [ 0.117352] vgaarb: loaded
  150. [ 0.117683] clocksource: Switched to clocksource arch_sys_counter
  151. [ 0.118097] VFS: Disk quotas dquot_6.6.0
  152. [ 0.118162] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  153. [ 0.119781] NET: Registered PF_INET protocol family
  154. [ 0.119962] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  155. [ 0.122286] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  156. [ 0.122322] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  157. [ 0.122342] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  158. [ 0.122481] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  159. [ 0.122925] TCP: Hash tables configured (established 16384 bind 16384)
  160. [ 0.123065] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  161. [ 0.123122] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  162. [ 0.123376] NET: Registered PF_UNIX/PF_LOCAL protocol family
  163. [ 0.123912] RPC: Registered named UNIX socket transport module.
  164. [ 0.123920] RPC: Registered udp transport module.
  165. [ 0.123924] RPC: Registered tcp transport module.
  166. [ 0.123928] RPC: Registered tcp NFSv4.1 backchannel transport module.
  167. [ 0.123938] PCI: CLS 0 bytes, default 64
  168. [ 0.124278] Unpacking initramfs...
  169. [ 0.134663] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  170. [ 0.136840] Initialise system trusted keyrings
  171. [ 0.137147] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  172. [ 0.147028] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  173. [ 0.148063] NFS: Registering the id_resolver key type
  174. [ 0.148096] Key type id_resolver registered
  175. [ 0.148102] Key type id_legacy registered
  176. [ 0.148236] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  177. [ 0.148244] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  178. [ 0.199894] Key type asymmetric registered
  179. [ 0.199910] Asymmetric key parser 'x509' registered
  180. [ 0.200059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  181. [ 0.200069] io scheduler mq-deadline registered
  182. [ 0.200075] io scheduler kyber registered
  183. [ 0.217570] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
  184. [ 0.217590] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  185. [ 0.220177] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
  186. [ 0.220196] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  187. [ 0.221540] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active.
  188. [ 0.222110] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
  189. [ 0.222454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  190. [ 0.224542] printk: console [ttyS2] disabled
  191. [ 0.224617] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 29, base_baud = 1500000) is a 16550A
  192. [ 0.324195] printk: console [ttyS2] enabled
  193. [ 0.329356] rockchip-vop2 fe040000.vop: Adding to iommu group 2
  194. [ 0.340764] cacheinfo: Unable to detect cache hierarchy for CPU 0
  195. [ 0.348606] loop: module loaded
  196. [ 0.354697] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  197. [ 0.355516] rk_gmac-dwmac fe010000.ethernet: no regulator found
  198. [ 0.356048] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
  199. [ 0.356679] rk_gmac-dwmac fe010000.ethernet: Can not read property: tx_delay.
  200. [ 0.357307] rk_gmac-dwmac fe010000.ethernet: set tx_delay to 0x30
  201. [ 0.357871] rk_gmac-dwmac fe010000.ethernet: Can not read property: rx_delay.
  202. [ 0.358501] rk_gmac-dwmac fe010000.ethernet: set rx_delay to 0x10
  203. [ 0.359050] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  204. [ 0.364688] rk_gmac-dwmac fe010000.ethernet: init for RGMII_ID
  205. [ 0.365476] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  206. [ 0.366143] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  207. [ 0.366605] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  208. [ 0.367265] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  209. [ 0.367923] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  210. [ 0.368543] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  211. [ 0.369110] rk_gmac-dwmac fe010000.ethernet: TSO supported
  212. [ 0.369596] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  213. [ 0.370327] rk_gmac-dwmac fe010000.ethernet: device MAC address 3a:ac:3e:23:e6:bd
  214. [ 0.370993] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
  215. [ 0.371625] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  216. [ 0.372157] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
  217. [ 0.997214] Freeing initrd memory: 16756K
  218. [ 1.267142] rockchip-naneng-combphy fe820000.phy: wait phy status ready timeout
  219. [ 1.278811] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  220. [ 1.279333] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  221. [ 1.280077] ehci-platform fd800000.usb: EHCI Host Controller
  222. [ 1.280099] ohci-platform fd840000.usb: Generic Platform OHCI controller
  223. [ 1.280161] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010
  224. [ 1.280178] ehci-platform fd880000.usb: EHCI Host Controller
  225. [ 1.280202] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
  226. [ 1.280222] xhci-hcd xhci-hcd.0.auto: irq 36, io mem 0xfd000000
  227. [ 1.280332] ehci-platform fd880000.usb: irq 38, io mem 0xfd880000
  228. [ 1.280382] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  229. [ 1.280404] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 3
  230. [ 1.280419] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  231. [ 1.280436] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
  232. [ 1.280452] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  233. [ 1.280530] ohci-platform fd8c0000.usb: irq 40, io mem 0xfd8c0000
  234. [ 1.281214] hub 1-0:1.0: USB hub found
  235. [ 1.288144] hub 1-0:1.0: 1 port detected
  236. [ 1.288905] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  237. [ 1.290234] hub 4-0:1.0: USB hub found
  238. [ 1.290618] hub 4-0:1.0: 1 port detected
  239. [ 1.291379] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 5
  240. [ 1.291394] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 6
  241. [ 1.291485] usbcore: registered new interface driver cdc_acm
  242. [ 1.291492] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  243. [ 1.291562] usbcore: registered new interface driver usb-storage
  244. [ 1.291666] usbcore: registered new interface driver ch341
  245. [ 1.291711] usbserial: USB Serial support registered for ch341-uart
  246. [ 1.291748] usbcore: registered new interface driver cp210x
  247. [ 1.291771] usbserial: USB Serial support registered for cp210x
  248. [ 1.291816] usbcore: registered new interface driver ftdi_sio
  249. [ 1.291840] usbserial: USB Serial support registered for FTDI USB Serial Device
  250. [ 1.291914] usbcore: registered new interface driver pl2303
  251. [ 1.291939] usbserial: USB Serial support registered for pl2303
  252. [ 1.292211] ehci-platform fd800000.usb: irq 37, io mem 0xfd800000
  253. [ 1.292895] ohci-platform fd840000.usb: irq 39, io mem 0xfd840000
  254. [ 1.293608] i2c_dev: i2c /dev entries driver
  255. [ 1.293735] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  256. [ 1.294463] hub 2-0:1.0: USB hub found
  257. [ 1.296546] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
  258. [ 1.297067] hub 2-0:1.0: 1 port detected
  259. [ 1.303582] rk808 0-0020: chip id: 0x8090
  260. [ 1.309741] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  261. [ 1.311042] hub 5-0:1.0: USB hub found
  262. [ 1.311430] hub 5-0:1.0: 1 port detected
  263. [ 1.342387] hub 3-0:1.0: USB hub found
  264. [ 1.342779] hub 3-0:1.0: 1 port detected
  265. [ 1.347399] rk808-regulator rk808-regulator: there is no dvs0 gpio
  266. [ 1.347976] rk808-regulator rk808-regulator: there is no dvs1 gpio
  267. [ 1.358431] hub 6-0:1.0: USB hub found
  268. [ 1.358806] hub 6-0:1.0: 1 port detected
  269. [ 1.403323] rk808-rtc rk808-rtc: registered as rtc0
  270. [ 1.406410] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:02 UTC (1501923602)
  271. [ 1.409079] i2c 3-0045: Fixing up cyclic dependency with fe070000.dsi
  272. [ 1.411143] edt_ft5x06 3-0038: supply vcc not found, using dummy regulator
  273. [ 1.411926] edt_ft5x06 3-0038: supply iovcc not found, using dummy regulator
  274. [ 1.417172] rtc-hym8563 5-0051: no valid clock/calendar values available
  275. [ 1.417994] rtc-hym8563 5-0051: registered as rtc1
  276. [ 1.421042] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
  277. [ 1.423401] edt_ft5x06 3-0038: touchscreen probe failed
  278. [ 1.431675] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
  279. [ 1.432859] sdhci: Secure Digital Host Controller Interface driver
  280. [ 1.433403] sdhci: Copyright(c) Pierre Ossman
  281. [ 1.433827] Synopsys Designware Multimedia Card Interface Driver
  282. [ 1.434626] sdhci-pltfm: SDHCI platform and OF driver helper
  283. [ 1.435418] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  284. [ 1.436070] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  285. [ 1.436654] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  286. [ 1.437177] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 72,32 bit host data width,256 deep fifo
  287. [ 1.438084] ledtrig-cpu: registered to indicate activity on CPUs
  288. [ 1.438339] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
  289. [ 1.438857] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  290. [ 1.439674] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  291. [ 1.440320] usbcore: registered new interface driver usbhid
  292. [ 1.440808] usbhid: USB HID core driver
  293. [ 1.441703] Driver 'optee' was unable to register with bus_type 'arm_ffa' because the bus was not initialized.
  294. [ 1.447557] NET: Registered PF_INET6 protocol family
  295. [ 1.448797] Segment Routing with IPv6
  296. [ 1.449148] In-situ OAM (IOAM) with IPv6
  297. [ 1.449528] NET: Registered PF_PACKET protocol family
  298. [ 1.450048] Key type dns_resolver registered
  299. [ 1.450646] registered taskstats version 1
  300. [ 1.451018] Loading compiled-in X.509 certificates
  301. [ 1.451662] Key type .fscrypt registered
  302. [ 1.452009] Key type fscrypt-provisioning registered
  303. [ 1.453138] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  304. [ 1.476038] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
  305. [ 1.476708] rockchip-dw-pcie 3c0000000.pcie: IO 0x033ef00000..0x033effffff -> 0x003ef00000
  306. [ 1.477483] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033eefffff -> 0x0000000000
  307. [ 1.478378] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
  308. [ 1.478913] rockchip-dw-pcie 3c0000000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
  309. [ 1.507975] mmc0: Problem switching card into high-speed mode!
  310. [ 1.508522] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  311. [ 1.509423] mmc0: new SDHC card at address 0001
  312. [ 1.510486] mmcblk0: mmc0:0001 SD32G 28.8 GiB
  313. [ 1.513269] mmcblk0: p1 p2
  314. [ 1.565696] usb 5-1: new high-speed USB device number 2 using ehci-platform
  315. [ 1.722693] hub 5-1:1.0: USB hub found
  316. [ 1.723144] hub 5-1:1.0: 4 ports detected
  317. [ 2.585783] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up
  318. [ 2.586423] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
  319. [ 2.587035] pci_bus 0000:00: root bus resource [bus 00-0f]
  320. [ 2.587519] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3ef00000-0x3effffff])
  321. [ 2.588353] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33eefffff] (bus address [0x00000000-0x3eefffff])
  322. [ 2.589278] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
  323. [ 2.589840] pci 0000:00:00.0: reg 0x38: [mem 0x300000000-0x30000ffff pref]
  324. [ 2.590497] pci 0000:00:00.0: supports D1 D2
  325. [ 2.590873] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  326. [ 2.595355] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
  327. [ 2.596502] pci 0000:00:00.0: BAR 6: assigned [mem 0x300000000-0x30000ffff pref]
  328. [ 2.597158] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  329. [ 2.597753] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
  330. [ 2.599188] pcieport 0000:00:00.0: PME: Signaling with IRQ 75
  331. [ 2.608758] panfrost fde60000.gpu: clock rate = 594000000
  332. [ 2.609257] panfrost fde60000.gpu: bus_clock rate = 500000000
  333. [ 2.613887] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
  334. [ 2.614574] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
  335. [ 2.615290] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
  336. [ 2.616319] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
  337. [ 2.617928] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 0
  338. [ 2.619717] rpi-ts-dsi fe070000.dsi.0: failed to attach dsi to host: -517
  339. [ 2.621490] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
  340. [ 2.623434] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  341. [ 2.624757] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
  342. [ 2.625722] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
  343. [ 2.626861] rockchip-drm display-subsystem: bound fe070000.dsi (ops dw_mipi_dsi_rockchip_ops)
  344. [ 2.628157] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
  345. [ 2.631109] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
  346. [ 2.635934] ALSA device list:
  347. [ 2.636210] #0: Dummy 1
  348. [ 2.636443] #1: Loopback 1
  349. [ 2.636844] dw-apb-uart fe660000.serial: forbid DMA for kernel console
  350. [ 2.638085] Freeing unused kernel memory: 2304K
  351. [ 2.638564] Run /init as init process
  352. [ 2.638888] with arguments:
  353. [ 2.638890] /init
  354. [ 2.638892] with environment:
  355. [ 2.638894] HOME=/
  356. [ 2.638896] TERM=linux
  357. [ 8.413683] random: crng init done
  358. [ 12.774511] platform hdmi-sound: deferred probe pending
  359. [ 12.775012] platform rk809-sound: deferred probe pending
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!