Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@1974287:~# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
- [ 0.000000] Linux version 4.19.66 (oe-user@oe-host) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Wed Aug 28 16:57:11 UTC 2019
- [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
- [ 0.000000] On node 0 totalpages: 517632
- [ 0.000000] DMA32 zone: 4096 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 255488 pages, LIFO batch:63
- [ 0.000000] Normal zone: 4096 pages used for memmap
- [ 0.000000] Normal zone: 262144 pages, LIFO batch:63
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x464 with crng_init=0
- [ 0.000000] percpu: Embedded 24 pages/cpu s57880 r8192 d32232 u98304
- [ 0.000000] pcpu-alloc: s57880 r8192 d32232 u98304 alloc=24*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for EL2 vector hardening
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 509440
- [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:00:C7:42 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 rootfstype=ext4 rootwait root=PARTUUID=002138c7-02 rootwait
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] software IO TLB: mapped [mem 0x3a5ff000-0x3e5ff000] (64MB)
- [ 0.000000] Memory: 1682052K/2070528K available (8828K kernel code, 1012K rwdata, 2856K rodata, 9920K init, 933K bss, 126332K reserved, 262144K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 31455 entries in 123 pages
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
- [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
- [ 0.000219] Console: colour dummy device 80x25
- [ 0.000573] console [tty1] enabled
- [ 0.000626] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
- [ 0.000663] pid_max: default: 32768 minimum: 301
- [ 0.000933] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000975] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.024029] ASID allocator initialised with 32768 entries
- [ 0.032030] rcu: Hierarchical SRCU implementation.
- [ 0.040525] EFI services will not be available.
- [ 0.048087] smp: Bringing up secondary CPUs ...
- [ 0.080274] Detected PIPT I-cache on CPU1
- [ 0.080332] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
- [ 0.112368] Detected PIPT I-cache on CPU2
- [ 0.112411] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
- [ 0.144477] Detected PIPT I-cache on CPU3
- [ 0.144519] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
- [ 0.144660] smp: Brought up 1 node, 4 CPUs
- [ 0.144746] SMP: Total of 4 processors activated.
- [ 0.144768] CPU features: detected: 32-bit EL0 Support
- [ 0.148625] CPU: All CPU(s) started at EL2
- [ 0.148679] alternatives: patching kernel code
- [ 0.149789] devtmpfs: initialized
- [ 0.157820] Enabled cp15_barrier support
- [ 0.157867] Enabled setend support
- [ 0.158238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.158279] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.164833] pinctrl core: initialized pinctrl subsystem
- [ 0.165448] DMI not present or invalid.
- [ 0.165860] NET: Registered protocol family 16
- [ 0.167078] cpuidle: using governor menu
- [ 0.167394] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
- [ 0.167422] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.169764] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.169869] Serial: AMBA PL011 UART driver
- [ 0.173193] bcm2835-mbox fe00b880.mailbox: mailbox enabled
- [ 0.205301] bcm2835-dma fe007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
- [ 0.207519] vgaarb: loaded
- [ 0.207836] SCSI subsystem initialized
- [ 0.208032] usbcore: registered new interface driver usbfs
- [ 0.208094] usbcore: registered new interface driver hub
- [ 0.208203] usbcore: registered new device driver usb
- [ 0.208282] pps_core: LinuxPPS API ver. 1 registered
- [ 0.208303] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.208340] PTP clock support registered
- [ 0.212752] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:38, variant start_cd
- [ 0.216893] raspberrypi-firmware soc:firmware: Firmware hash is d2b1b7fb01475cb3914b2086299e32d724e832f1
- [ 0.222069] clocksource: Switched to clocksource arch_sys_counter
- [ 0.297810] VFS: Disk quotas dquot_6.6.0
- [ 0.297919] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.298160] FS-Cache: Loaded
- [ 0.298343] CacheFiles: Loaded
- [ 0.306000] NET: Registered protocol family 2
- [ 0.306719] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
- [ 0.306768] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.306887] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.307168] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.307350] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.307395] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.307628] NET: Registered protocol family 1
- [ 0.312312] RPC: Registered named UNIX socket transport module.
- [ 0.312337] RPC: Registered udp transport module.
- [ 0.312355] RPC: Registered tcp transport module.
- [ 0.312373] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.312400] PCI: CLS 0 bytes, default 64
- [ 0.375893] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 0.377833] Initialise system trusted keyrings
- [ 0.378340] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 0.385236] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.385301] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.385982] NFS: Registering the id_resolver key type
- [ 0.386023] Key type id_resolver registered
- [ 0.386043] Key type id_legacy registered
- [ 0.386376] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.389098] Key type asymmetric registered
- [ 0.389126] Asymmetric key parser 'x509' registered
- [ 0.389185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.389400] io scheduler noop registered
- [ 0.389423] io scheduler deadline registered
- [ 0.389577] io scheduler cfq registered (default)
- [ 0.389600] io scheduler mq-deadline registered
- [ 0.389620] io scheduler kyber registered
- [ 0.392660] brcm-pcie fd500000.pcie: could not get clock
- [ 0.392742] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
- [ 0.392795] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
- [ 0.442111] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
- [ 0.442380] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
- [ 0.442410] pci_bus 0000:00: root bus resource [bus 00-01]
- [ 0.442436] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
- [ 0.442499] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
- [ 0.442653] pci 0000:00:00.0: PME# supported from D0 D3hot
- [ 0.445535] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.445719] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
- [ 0.445783] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- [ 0.445957] pci 0000:01:00.0: PME# supported from D0 D3cold
- [ 0.448798] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
- [ 0.448849] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
- [ 0.448882] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
- [ 0.448927] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.448954] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
- [ 0.449029] pci 0000:00:00.0: enabling device (0000 -> 0002)
- [ 0.449064] pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 0.450918] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 0.452590] iproc-rng200 fe104000.rng: hwrng registered
- [ 0.452893] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
- [ 0.453552] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
- [ 0.453852] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.463026] brd: module loaded
- [ 0.472603] loop: module loaded
- [ 0.473408] Loading iSCSI transport class v2.0-870.
- [ 0.475221] libphy: Fixed MDIO Bus: probed
- [ 0.475272] tun: Universal TUN/TAP device driver, 1.6
- [ 0.475875] bcmgenet fd580000.genet: failed to get enet clock
- [ 0.475906] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
- [ 0.475933] bcmgenet fd580000.genet: failed to get enet-wol clock
- [ 0.475960] bcmgenet fd580000.genet: failed to get enet-eee clock
- [ 0.475993] bcmgenet: Skipping UMAC reset
- [ 0.476222] unimac-mdio unimac-mdio.-19: DMA mask not set
- [ 0.486099] libphy: bcmgenet MII bus: probed
- [ 0.514800] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(____ptrval____)
- [ 0.515946] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 0.515989] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
- [ 0.519015] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
- [ 0.519194] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 44
- [ 0.519842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 0.519874] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.519900] usb usb1: Product: xHCI Host Controller
- [ 0.519920] usb usb1: Manufacturer: Linux 4.19.66 xhci-hcd
- [ 0.519940] usb usb1: SerialNumber: 0000:01:00.0
- [ 0.520443] hub 1-0:1.0: USB hub found
- [ 0.520509] hub 1-0:1.0: 1 port detected
- [ 0.520955] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 0.520989] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
- [ 0.521022] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
- [ 0.521370] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 0.521399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.521424] usb usb2: Product: xHCI Host Controller
- [ 0.521444] usb usb2: Manufacturer: Linux 4.19.66 xhci-hcd
- [ 0.521464] usb usb2: SerialNumber: 0000:01:00.0
- [ 0.521927] hub 2-0:1.0: USB hub found
- [ 0.521994] hub 2-0:1.0: 4 ports detected
- [ 0.522841] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 0.523122] dwc_otg fe980000.usb: base=(____ptrval____)
- [ 0.725778] Core Release: 2.80a
- [ 0.725802] Setting default values for core params
- [ 0.725838] Finished setting default values for core params
- [ 0.854103] usb 1-1: new high-speed USB device number 2 using xhci_hcd
- [ 0.928985] Using Buffer DMA mode
- [ 0.929011] Periodic Transfer Interrupt Enhancement - disabled
- [ 0.929033] Multiprocessor Interrupt Enhancement - disabled
- [ 0.929054] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 0.929086] Dedicated Tx FIFOs mode
- [ 0.929415] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff8009ac1000 dma = 0x00000000ded34000 len=9024
- [ 0.929464] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- [ 0.929513] dwc_otg: Microframe scheduler enabled
- [ 0.929598] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff80099f5200
- [ 0.929691] dwc_otg fe980000.usb: DWC OTG Controller
- [ 0.929727] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
- [ 0.929784] dwc_otg fe980000.usb: irq 25, io mem 0x00000000
- [ 0.929844] Init: Port Power? op_state=1
- [ 0.929862] Init: Power Port (0)
- [ 0.930165] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 0.930196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.930221] usb usb3: Product: DWC OTG Controller
- [ 0.930241] usb usb3: Manufacturer: Linux 4.19.66 dwc_otg_hcd
- [ 0.930261] usb usb3: SerialNumber: fe980000.usb
- [ 0.930783] hub 3-0:1.0: USB hub found
- [ 0.930846] hub 3-0:1.0: 1 port detected
- [ 0.931466] dwc_otg: FIQ enabled
- [ 0.931475] dwc_otg: NAK holdoff enabled
- [ 0.931483] dwc_otg: FIQ split-transaction FSM enabled
- [ 0.931494] Module dwc_common_port init
- [ 0.931777] usbcore: registered new interface driver usb-storage
- [ 0.931975] mousedev: PS/2 mouse device common for all mice
- [ 0.933330] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
- [ 0.933515] bcm2835-cpufreq: min=600000 max=1500000
- [ 0.934344] sdhci: Secure Digital Host Controller Interface driver
- [ 0.934367] sdhci: Copyright(c) Pierre Ossman
- [ 0.934767] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
- [ 0.935013] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.936998] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.937070] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.937152] usbcore: registered new interface driver usbhid
- [ 0.937161] usbhid: USB HID core driver
- [ 0.937749] Initializing XFRM netlink socket
- [ 0.938002] NET: Registered protocol family 10
- [ 0.938573] Segment Routing with IPv6
- [ 0.938627] NET: Registered protocol family 17
- [ 0.938657] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 0.938712] Key type dns_resolver registered
- [ 0.939104] registered taskstats version 1
- [ 0.939119] Loading compiled-in X.509 certificates
- [ 0.942558] uart-pl011 fe201000.serial: cts_event_workaround enabled
- [ 0.942631] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
- [ 0.944842] console [ttyS0] disabled
- [ 0.944865] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 22, base_baud = 62500000) is a 16550
- [ 1.003176] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
- [ 1.006647] console [ttyS0] enabled
- [ 1.013270] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.081494] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
- [ 1.087924] usb 1-1: Product: USB2.0 Hub
- [ 1.094346] hub 1-1:1.0: USB hub found
- [ 1.099848] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
- [ 1.106090] hub 1-1:1.0: 4 ports detected
- [ 1.109418] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
- [ 2.261970] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
- [ 2.293749] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
- [ 2.320998] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 2.328171] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.333756] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
- [ 2.342302] of_cfs_init
- [ 2.342816] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.344834] of_cfs_init: OK
- [ 2.353136] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 2.360656] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.367694] Freeing unused kernel memory: 9920K
- [ 2.372392] Run /init as init process
- [ 2.405753] random: fast init done
- [ 2.435808] mmc1: new high speed SDIO card at address 0001
- [ 2.463977] mmc0: new ultra high speed DDR50 SDXC card at address 0001
- [ 2.471724] mmcblk0: mmc0:0001 FC8HT 59.6 GiB
- [ 2.482047] mmcblk0: p1 p2 p3 p4 < p5 p6 >
- [ 2.867535] CP437: Invalid argument
- [ 2.908685] fsck.fat 4.1 (2017-01-24)
- /dev/disk/by-label/resin-boot: 149 files, 15678/80628 clusters
- [ 2.931607] resin-rootA: clean, 5737/39936 files, 295064/319488 blocks
- [ 2.972450] resin-rootB: clean, 11/39936 files, 15349/319488 blocks
- [ 3.014721] resin-state: clean, 11/5136 files, 1849/20480 blocks
- [ 3.206183] mmcblk0: p1 p2 p3 p4 < p5 p6 >
- [ 3.751729] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.797944] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.415347] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 4.646455] systemd[1]: System time before build time, advancing clock.
- [ 4.667512] systemd[1]: systemd 241-9-gc1f8ff8+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
- [ 4.691117] systemd[1]: Detected architecture arm64.
- [ 4.714273] systemd[1]: No hostname configured.
- [ 4.719001] systemd[1]: Set hostname to <localhost>.
- [ 4.728810] random: systemd: uninitialized urandom read (16 bytes read)
- [ 4.735591] systemd[1]: Initializing machine ID from random generator.
- [ 4.750325] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
- [ 4.757874] systemd[1]: Hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0
- [ 4.765948] systemd[1]: Set hardware watchdog to 10s.
- [ 4.815591] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 4.833101] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 4.985209] random: systemd: uninitialized urandom read (16 bytes read)
- [ 4.992068] random: systemd: uninitialized urandom read (16 bytes read)
- [ 58.463786] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
- [ 59.591903] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 59.619095] vchiq: vchiq_init_state: slot_zero = (____ptrval____), is_master = 0
- [ 59.692716] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
- [ 59.707069] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
- [ 59.744871] bcm2835_audio soc:audio: card created with 8 channels
- [ 59.807030] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 59.826607] [drm] No displays found. Consider forcing hotplug if HDMI is attached
- [ 59.837549] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
- [ 59.845137] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
- [ 59.847862] media: Linux media interface: v0.10
- [ 59.860957] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
- [ 59.867718] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
- [ 59.869759] [vc_sm_connected_init]: start
- [ 59.878556] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 59.882982] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 59.886942] [drm] No driver support for vblank timestamp query.
- [ 59.889759] vc_sm_cma_vchi_init: failed to open VCHI service (-1)
- [ 59.889768] [vc_sm_connected_init]: failed to initialize shared memory service
- [ 59.895977] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 59.901445] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
- [ 59.908875] cfg80211: failed to load regulatory.db
- [ 59.911605] videodev: Linux video capture interface: v2.00
- [ 59.973832] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 59.989422] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
- [ 60.001510] brcmfmac: F1 signature read @0x18000000=0x15264345
- [ 60.004609] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
- [ 60.012540] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 60.021903] usbcore: registered new interface driver brcmfmac
- [ 60.170050] random: crng init done
- [ 60.173516] random: 7 urandom warning(s) missed due to ratelimiting
- [ 60.217693] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 60.236279] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
- [ 60.714429] uart-pl011 fe201000.serial: no DMA platform data
- [ 62.554806] i2c /dev entries driver
- [ 63.064101] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 63.070433] bcmgenet: Skipping UMAC reset
- [ 63.146696] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
- [ 63.155815] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 63.178493] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 63.211519] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 63.217631] brcmfmac: power management disabled
- [ 63.745163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 63.751316] brcmfmac: power management disabled
- [ 63.923982] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 64.051598] Bridge firewalling registered
- [ 64.158365] bcmgenet fd580000.genet eth0: Link is Down
- [ 64.391587] IPv6: ADDRCONF(NETDEV_UP): balena0: link is not ready
- [ 67.089112] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 67.095161] brcmfmac: power management disabled
- [ 67.341094] Bluetooth: Core ver 2.22
- [ 67.344788] NET: Registered protocol family 31
- [ 67.349314] Bluetooth: HCI device and connection manager initialized
- [ 67.355805] Bluetooth: HCI socket layer initialized
- [ 67.360770] Bluetooth: L2CAP socket layer initialized
- [ 67.365938] Bluetooth: SCO socket layer initialized
- [ 67.380297] Bluetooth: HCI UART driver ver 2.3
- [ 67.384847] Bluetooth: HCI UART protocol H4 registered
- [ 67.390118] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 67.396720] Bluetooth: HCI UART protocol Broadcom registered
- [ 67.609666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 67.616173] Bluetooth: BNEP filters: protocol multicast
- [ 67.621743] Bluetooth: BNEP socket layer initialized
- [ 72.409871] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 90.262346] IPv6: ADDRCONF(NETDEV_UP): supervisor0: link is not ready
- [ 378.325988] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd
- [ 378.414280] usb 1-1.2: device descriptor read/64, error -32
- [ 378.606248] usb 1-1.2: device descriptor read/64, error -32
- [ 379.214061] usb 1-1.2: new low-speed USB device number 4 using xhci_hcd
- [ 379.302315] usb 1-1.2: device descriptor read/64, error -32
- [ 379.494331] usb 1-1.2: device descriptor read/64, error -32
- [ 379.606453] usb 1-1-port2: attempt power cycle
- [ 380.214138] usb 1-1.2: new low-speed USB device number 5 using xhci_hcd
- [ 380.221512] usb 1-1.2: Device not responding to setup address.
- [ 380.434698] usb 1-1.2: Device not responding to setup address.
- [ 380.646167] usb 1-1.2: device not accepting address 5, error -71
- [ 380.730177] usb 1-1.2: new low-speed USB device number 6 using xhci_hcd
- [ 380.737588] usb 1-1.2: Device not responding to setup address.
- [ 380.950728] usb 1-1.2: Device not responding to setup address.
- [ 381.162182] usb 1-1.2: device not accepting address 6, error -71
- [ 381.168719] usb 1-1-port2: unable to enumerate USB device
- [ 403.008491] IPv6: ADDRCONF(NETDEV_UP): br-dca05dc127b8: link is not ready
- [ 1139.482240] usb 1-1.2: new low-speed USB device number 7 using xhci_hcd
- [ 1139.570478] usb 1-1.2: device descriptor read/64, error -32
- [ 1140.014518] usb 1-1.2: device descriptor read/64, error -32
- [ 1140.206253] usb 1-1.2: new low-speed USB device number 8 using xhci_hcd
- [ 1140.294494] usb 1-1.2: device descriptor read/64, error -32
- [ 1140.486493] usb 1-1.2: device descriptor read/64, error -32
- [ 1140.598438] usb 1-1-port2: attempt power cycle
- [ 1141.206278] usb 1-1.2: new low-speed USB device number 9 using xhci_hcd
- [ 1141.213600] usb 1-1.2: Device not responding to setup address.
- [ 1141.427047] usb 1-1.2: Device not responding to setup address.
- [ 1141.638289] usb 1-1.2: device not accepting address 9, error -71
- [ 1141.722280] usb 1-1.2: new low-speed USB device number 10 using xhci_hcd
- [ 1141.729671] usb 1-1.2: Device not responding to setup address.
- [ 1141.943123] usb 1-1.2: Device not responding to setup address.
- [ 1142.154305] usb 1-1.2: device not accepting address 10, error -71
- [ 1142.160773] usb 1-1-port2: unable to enumerate USB device
- [ 1516.489726] usb 1-1.2: new low-speed USB device number 11 using xhci_hcd
- [ 1516.577790] usb 1-1.2: device descriptor read/64, error -32
- [ 1516.769798] usb 1-1.2: device descriptor read/64, error -32
- [ 1516.961547] usb 1-1.2: new low-speed USB device number 12 using xhci_hcd
- [ 1517.049800] usb 1-1.2: device descriptor read/64, error -32
- [ 1517.241790] usb 1-1.2: device descriptor read/64, error -32
- [ 1517.353784] usb 1-1-port2: attempt power cycle
- [ 1588.846952] usb 1-1.2: new low-speed USB device number 14 using xhci_hcd
- [ 1588.935220] usb 1-1.2: device descriptor read/64, error -32
- [ 1589.127191] usb 1-1.2: device descriptor read/64, error -32
- [ 1589.318955] usb 1-1.2: new low-speed USB device number 15 using xhci_hcd
- [ 1589.407230] usb 1-1.2: device descriptor read/64, error -32
- [ 1589.599208] usb 1-1.2: device descriptor read/64, error -32
- [ 1589.711197] usb 1-1-port2: attempt power cycle
- [ 1671.304571] usb 1-1.2: new low-speed USB device number 17 using xhci_hcd
- [ 1671.392820] usb 1-1.2: device descriptor read/64, error -32
- [ 1671.584804] usb 1-1.2: device descriptor read/64, error -32
- [ 1671.776578] usb 1-1.2: new low-speed USB device number 18 using xhci_hcd
- [ 1671.864836] usb 1-1.2: device descriptor read/64, error -32
- [156233.632009] balena0: port 1(veth4821abb) entered blocking state
- [156233.638162] balena0: port 1(veth4821abb) entered disabled state
- [156233.644738] device veth4821abb entered promiscuous mode
- [156233.650785] IPv6: ADDRCONF(NETDEV_UP): veth4821abb: link is not ready
- [156234.222406] eth0: renamed from veth4936e72
- [156234.247845] IPv6: ADDRCONF(NETDEV_CHANGE): veth4821abb: link becomes ready
- [156234.255103] balena0: port 1(veth4821abb) entered blocking state
- [156234.261217] balena0: port 1(veth4821abb) entered forwarding state
- [156234.267665] IPv6: ADDRCONF(NETDEV_CHANGE): balena0: link becomes ready
- [156234.898209] balena0: port 1(veth4821abb) entered disabled state
- [156234.904817] veth4936e72: renamed from eth0
- [156234.972276] balena0: port 1(veth4821abb) entered disabled state
- [156234.990994] device veth4821abb left promiscuous mode
- [156234.996744] balena0: port 1(veth4821abb) entered disabled state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement