[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.27+ (jenkins@vps01) (arm-linux-gnueabihf-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701], GNU ld (Linaro_Binutils-2018.05) 2.28.2.20170706) #1 SMP PREEMPT Fri Apr 16 20:19:06 CEST 2021
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001bc00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002bffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x000000002c000000-0x00000000fbffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002bffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] On node 0 totalpages: 950272
[    0.000000]   DMA zone: 2112 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 180224 pages, LIFO batch:63
[    0.000000]   HighMem zone: 770048 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s51468 r8192 d22260 u81920
[    0.000000] pcpu-alloc: s51468 r8192 d22260 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 948160
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:7D:D8:DD vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  telnet zswap.enabled=1 zswap.compressor=lz4 console=tty1 partswap root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=none rootfstype=btrfs rootwait logo.nologo quiet noswap loglevel=0 startevent=mountall selinux=0 splash nohdparm net.ifnames=0 biosdevname=0 --startup-event mountall
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000014cc0000-0x0000000018cc0000] (64MB)
[    0.000000] Memory: 3405820K/3801088K available (12288K kernel code, 1479K rwdata, 3528K rodata, 2048K init, 909K bss, 133124K reserved, 262144K cma-reserved, 3080192K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35607 entries in 70 pages
[    0.000000] ftrace: allocated 70 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x3d0/0x5a4 with crng_init=0
[    0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000012] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000042] bcm2835: system timer (irq = 25)
[    0.000311] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000319] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000328] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000334] Switching to timer-based delay loop, resolution 18ns
[    0.000455] Console: colour dummy device 80x30
[    0.000488] printk: console [tty1] enabled
[    0.000514] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000528] pid_max: default: 32768 minimum: 301
[    0.000600] LSM: Security Framework initializing
[    0.000687] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000699] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001408] Disabling memory control group subsystem
[    0.001467] CPU: Testing write buffer coherency: ok
[    0.001714] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002377] Setting up static identity map for 0x200000 - 0x20003c
[    0.002473] rcu: Hierarchical SRCU implementation.
[    0.003105] smp: Bringing up secondary CPUs ...
[    0.003760] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004511] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.005189] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.005266] smp: Brought up 1 node, 4 CPUs
[    0.005276] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.005282] CPU: All CPU(s) started in HYP mode.
[    0.005288] CPU: Virtualization extensions available.
[    0.005685] devtmpfs: initialized
[    0.012192] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.012349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.012366] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.015940] pinctrl core: initialized pinctrl subsystem
[    0.016600] NET: Registered protocol family 16
[    0.018737] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.019090] audit: initializing netlink subsys (disabled)
[    0.019219] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1
[    0.019482] thermal_sys: Registered thermal governor 'step_wise'
[    0.019939] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.019947] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.020191] Serial: AMBA PL011 UART driver
[    0.034465] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.040445] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-07T18:28:28, variant start_x
[    0.044450] raspberrypi-firmware soc:firmware: Firmware hash is fb345a0c2d5544957f4ba1a2b9e968970e3312c4
[    0.062226] Kprobes globally optimized
[    0.132593] raid6: neonx8   gen()  3585 MB/s
[    0.200634] raid6: neonx8   xor()  2284 MB/s
[    0.268702] raid6: neonx4   gen()  4270 MB/s
[    0.336766] raid6: neonx4   xor()  2666 MB/s
[    0.404833] raid6: neonx2   gen()  3752 MB/s
[    0.472898] raid6: neonx2   xor()  2746 MB/s
[    0.540964] raid6: neonx1   gen()  2897 MB/s
[    0.609030] raid6: neonx1   xor()  2291 MB/s
[    0.677104] raid6: int32x8  gen()   933 MB/s
[    0.745168] raid6: int32x8  xor()   514 MB/s
[    0.813246] raid6: int32x4  gen()   989 MB/s
[    0.881319] raid6: int32x4  xor()   606 MB/s
[    0.949378] raid6: int32x2  gen()  1003 MB/s
[    1.017432] raid6: int32x2  xor()   594 MB/s
[    1.085492] raid6: int32x1  gen()   997 MB/s
[    1.153559] raid6: int32x1  xor()   487 MB/s
[    1.153566] raid6: using algorithm neonx4 gen() 4270 MB/s
[    1.153573] raid6: .... xor() 2666 MB/s, rmw enabled
[    1.153580] raid6: using neon recovery algorithm
[    1.153990] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    1.155958] vgaarb: loaded
[    1.156167] SCSI subsystem initialized
[    1.156279] usbcore: registered new interface driver usbfs
[    1.156306] usbcore: registered new interface driver hub
[    1.156341] usbcore: registered new device driver usb
[    1.157201] clocksource: Switched to clocksource arch_sys_counter
[    1.597771] VFS: Disk quotas dquot_6.6.0
[    1.597822] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.597915] FS-Cache: Loaded
[    1.598047] CacheFiles: Loaded
[    1.598596] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes, mapped to 0x(ptrval)
[    1.598606] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    1.598843] Console: switching to colour frame buffer device 240x67
[    1.602712] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered!
[    1.606819] NET: Registered protocol family 2
[    1.607268] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.607290] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.607370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.607402] TCP: Hash tables configured (established 8192 bind 8192)
[    1.607497] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.607519] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.607742] NET: Registered protocol family 1
[    1.608127] RPC: Registered named UNIX socket transport module.
[    1.608134] RPC: Registered udp transport module.
[    1.608141] RPC: Registered tcp transport module.
[    1.608147] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.608159] PCI: CLS 0 bytes, default 64
[    1.609753] Initialise system trusted keyrings
[    1.609886] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    1.613791] zbud: loaded
[    1.614600] FS-Cache: Netfs 'nfs' registered for caching
[    1.614970] NFS: Registering the id_resolver key type
[    1.614996] Key type id_resolver registered
[    1.615002] Key type id_legacy registered
[    1.615068] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.615076] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.615569] xor: measuring software checksum speed
[    1.618228]    arm4regs        :  3789 MB/sec
[    1.621673]    8regs           :  2876 MB/sec
[    1.625111]    32regs          :  2865 MB/sec
[    1.626808]    neon            :  5843 MB/sec
[    1.626815] xor: using function: neon (5843 MB/sec)
[    1.626826] Key type asymmetric registered
[    1.626834] Asymmetric key parser 'x509' registered
[    1.626922] bounce: pool size: 64 pages
[    1.626948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.627060] io scheduler mq-deadline registered
[    1.627068] io scheduler kyber registered
[    1.629189] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.629254] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.629292] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.629333] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.679271] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.679457] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.679466] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.679476] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.679521] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.679647] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.681134] PCI: bus0: Fast back to back transfers disabled
[    1.681146] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.681382] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.681451] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.681780] pci 0000:01:00.0: PME# supported from D0 D3cold
[    1.683283] PCI: bus1: Fast back to back transfers disabled
[    1.683292] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.683313] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.683324] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.683387] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.683399] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.683598] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.683716] pcieport 0000:00:00.0: PME: Signaling with IRQ 62
[    1.687566] iproc-rng200 fe104000.rng: hwrng registered
[    1.687700] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.688110] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.693771] brd: module loaded
[    1.694535] Loading iSCSI transport class v2.0-870.
[    1.695725] libphy: Fixed MDIO Bus: probed
[    1.696307] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.705240] libphy: bcmgenet MII bus: probed
[    1.753272] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.753844] usbcore: registered new interface driver lan78xx
[    1.753878] usbcore: registered new interface driver smsc95xx
[    1.755246] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[    1.755363] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.755385] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.757030] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[    1.757758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.757767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.757775] usb usb1: Product: xHCI Host Controller
[    1.757782] usb usb1: Manufacturer: Linux 5.10.27+ xhci-hcd
[    1.757789] usb usb1: SerialNumber: 0000:01:00.0
[    1.758137] hub 1-0:1.0: USB hub found
[    1.758198] hub 1-0:1.0: 1 port detected
[    1.758551] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.758562] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.758574] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.758831] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.758839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.758846] usb usb2: Product: xHCI Host Controller
[    1.758853] usb usb2: Manufacturer: Linux 5.10.27+ xhci-hcd
[    1.758860] usb usb2: SerialNumber: 0000:01:00.0
[    1.759193] hub 2-0:1.0: USB hub found
[    1.759253] hub 2-0:1.0: 4 ports detected
[    1.760149] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.760289] dwc_otg: FIQ enabled
[    1.760295] dwc_otg: NAK holdoff enabled
[    1.760302] dwc_otg: FIQ split-transaction FSM enabled
[    1.760310] Module dwc_common_port init
[    1.760476] usbcore: registered new interface driver usb-storage
[    1.760587] mousedev: PS/2 mouse device common for all mice
[    1.761554] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.763319] sdhci: Secure Digital Host Controller Interface driver
[    1.763326] sdhci: Copyright(c) Pierre Ossman
[    1.763671] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.763935] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.767160] ledtrig-cpu: registered to indicate activity on CPUs
[    1.767323] hid: raw HID events driver (C) Jiri Kosina
[    1.767412] usbcore: registered new interface driver usbhid
[    1.767418] usbhid: USB HID core driver
[    1.770506] Initializing XFRM netlink socket
[    1.770530] NET: Registered protocol family 17
[    1.770591] Key type dns_resolver registered
[    1.770857] Registering SWP/SWPB emulation handler
[    1.770947] registered taskstats version 1
[    1.770961] Loading compiled-in X.509 certificates
[    1.771940] zswap: compressor lz4 not available, using default lzo
[    1.771977] zswap: loaded using pool lzo/zbud
[    1.772070] Key type ._fscrypt registered
[    1.772077] Key type .fscrypt registered
[    1.772083] Key type fscrypt-provisioning registered
[    1.772709] Btrfs loaded, crc32c=crc32c-generic
[    1.780550] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.780700] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.780751] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[    1.785326] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.785842] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.785850] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.813919] of_cfs_init
[    1.813993] of_cfs_init: OK
[    1.829107] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.830680] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.832252] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.835140] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.836714] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.847518] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    1.847996] Waiting for root device /dev/mmcblk0p2...
[    1.869001] random: fast init done
[    1.895723] mmc1: new high speed SDIO card at address 0001
[    1.962739] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[    1.963240] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[    1.964833]  mmcblk0: p1 p2 p3
[    1.973912] BTRFS: device label xbian devid 1 transid 65034 /dev/root scanned by swapper/0 (1)
[    1.974957] BTRFS info (device mmcblk0p2): enabling auto defrag
[    1.974968] BTRFS info (device mmcblk0p2): use no compression
[    1.974976] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    1.974984] BTRFS info (device mmcblk0p2): has skinny extents
[    1.997929] BTRFS info (device mmcblk0p2): enabling ssd optimizations
[    2.008356] VFS: Mounted root (btrfs filesystem) readonly on device 0:17.
[    2.014845] devtmpfs: mounted
[    2.018611] Freeing unused kernel memory: 2048K
[    2.029422] Run /sbin/init as init process
[    2.029430]   with arguments:
[    2.029437]     /sbin/init
[    2.029444]     telnet
[    2.029451]     partswap
[    2.029457]     noswap
[    2.029463]     splash
[    2.029469]     nohdparm
[    2.029476]     --startup-event
[    2.029482]     mountall
[    2.029488]   with environment:
[    2.029495]     HOME=/
[    2.029501]     TERM=linux
[    2.029508]     startevent=mountall
[    2.029514]     selinux=0
[    2.029520]     biosdevname=0
[    2.093232] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.243911] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.243928] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.243941] usb 1-1: Product: USB2.0 Hub
[    2.245691] hub 1-1:1.0: USB hub found
[    2.246006] hub 1-1:1.0: 4 ports detected
[    2.289551] random: init: uninitialized urandom read (12 bytes read)
[    2.333010] init: progress-report (starteddevroot) main process (119) terminated with status 1
[    2.333948] init: progress-report (mountall) main process (114) terminated with status 1
[    2.624454] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    2.780188] BTRFS info (device mmcblk0p2): devid 1 device path /dev/root changed to /dev/mmcblk0p2 scanned by mount (250)
[    2.921172] init: xbian-failaccess main process (137) killed by TERM signal
[    3.088943] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    3.098817] bcm2835_audio bcm2835_audio: card created with 4 channels
[    3.119539] bcm2835_audio bcm2835_audio: card created with 4 channels
[    4.321775] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    4.727945] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    6.942738] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    6.990917] random: automount: uninitialized urandom read (4 bytes read)
[    7.032890] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    7.033264] bcmgenet fd580000.ethernet eth0: Link is Down
[    7.036580] random: automount: uninitialized urandom read (4 bytes read)
[    7.104019] init: network-interface (wlan0) pre-start process (598) terminated with status 1
[    7.267166] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    8.501565] BTRFS info (device mmcblk0p2): disk space caching is enabled
[   10.235056] BTRFS info (device mmcblk0p2): disk space caching is enabled
[   10.912226] BTRFS info (device mmcblk0p2): disk space caching is enabled
[   11.137481] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   11.227615] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.351992] random: net: uninitialized urandom read (8 bytes read)
[   11.389365] random: mountall: uninitialized urandom read (12 bytes read)
[   11.688065] random: net: uninitialized urandom read (8 bytes read)
[   12.305761] random: crng init done
[   12.305776] random: 2 urandom warning(s) missed due to ratelimiting
[   12.311268] init: failsafe main process (282) killed by TERM signal
[   12.618008] usb_phy_generic phy: supply vcc not found, using dummy regulator
[   12.623349] Registered IR keymap rc-rc6-mce
[   12.646836] IR RC6 protocol handler initialized
[   12.681988] mc: Linux media interface: v0.10
[   12.683751] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0
[   12.684158] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[   12.684595] input: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0/input0
[   12.748845] videodev: Linux video capture interface: v2.00
[   12.771085] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   12.772307] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   12.772320] [vc_sm_connected_init]: start
[   12.778318] [vc_sm_connected_init]: installed successfully
[   12.803530] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   12.804296] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   12.814069] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   12.818039] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[   12.833028] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   12.834582] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   12.838074] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[   12.860223] rpivid feb10000.codec: Device registered as /dev/video19
[   12.948403] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[   13.081496] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fence_ops [vc4])
[   13.081510] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff)
[   13.081518] fb0: switching to vc4drmfb from simple
[   13.081896] Console: switching to colour dummy device 80x30
[   13.085663] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[   13.111889] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.159640] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.164112] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   13.164144] cfg80211: failed to load regulatory.db
[   13.196299] brcmfmac: F1 signature read @0x18000000=0x15264345
[   13.211629] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   13.213164] usbcore: registered new interface driver brcmfmac
[   13.231119] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[   13.287930] Console: switching to colour frame buffer device 240x67
[   13.313538] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[   13.486872] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   13.486954] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   13.494386] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   13.496330] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[   13.496675] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[   13.497586] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[   13.504254] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[   13.504285] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   13.504297] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   13.504307] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   13.504317] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   13.504782] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[   13.508940] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[   13.509961] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   13.510035] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   13.565736] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   13.567480] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   13.819537] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   13.988148] uart-pl011 fe201000.serial: no DMA platform data
[   14.845567] init: xbmc pre-start process (2275) terminated with status 1
[   23.988737] init: rpi-bluetooth main process (1887) terminated with status 1
[   23.988777] init: rpi-bluetooth main process ended, respawning
[   25.064796] Bluetooth: Core ver 2.22
[   25.065859] NET: Registered protocol family 31
[   25.065869] Bluetooth: HCI device and connection manager initialized
[   25.065884] Bluetooth: HCI socket layer initialized
[   25.065895] Bluetooth: L2CAP socket layer initialized
[   25.065916] Bluetooth: SCO socket layer initialized
[   25.081626] Bluetooth: HCI UART driver ver 2.3
[   25.081638] Bluetooth: HCI UART protocol H4 registered
[   25.081694] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   25.081865] Bluetooth: HCI UART protocol Broadcom registered
[   26.189309] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.189325] Bluetooth: BNEP filters: protocol multicast
[   26.189347] Bluetooth: BNEP socket layer initialized
[  114.027003] init: wait-for-state (zram-swapxbmc-done) main process (1922) terminated with status 100
[  114.053054] zram: Added device: zram0
[  114.053472] zram: Added device: zram1
[  114.054021] zram: Added device: zram2
[  114.054461] zram: Added device: zram3
[  114.082251] zram0: detected capacity change from 0 to 134217728
[  114.133229] Adding 131068k swap on /dev/zram0.  Priority:20 extents:1 across:131068k SSFS
[  114.261219] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:250876k SSFS
[  165.266258] init: wait-for-state (xbmcxbmc-loaded) main process (2465) terminated with status 100
[  165.328246] init: xbmc-failed-start main process (284) killed by TERM signal
[  165.396681] init: xbmc post-start process (2458) terminated with status 1
[  166.053323] init: wait-for-state (kill-splashxbmc-exits) main process (3229) killed by TERM signal