API tools faq
paste
Guest User

X31 NetBSD dmesg

a guest
Jan 6th, 2026
43
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.72 KB | Software | 0 0
raw download clone embed print report
  1. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
  2. 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
  3. 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
  4. 2024
  5. The NetBSD Foundation, Inc. All rights reserved.
  6. Copyright (c) 1982, 1986, 1989, 1991, 1993
  7. The Regents of the University of California. All rights reserved.
  8.  
  9. NetBSD 9.4 (GENERIC) #0: Sat Apr 20 13:32:22 UTC 2024
  10. [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
  11. total memory = 1022 MB
  12. avail memory = 985 MB
  13. rnd: seeded with 256 bits
  14. timecounter: Timecounters tick every 10.000 msec
  15. Kernelized RAIDframe activated
  16. running cgd selftest aes-xts-256 aes-xts-512 done
  17. timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
  18. IBM 2672PHG (ThinkPad X31)
  19. mainbus0 (root)
  20. ACPI: RSDP 0x00000000000F6D70 000024 (v02 IBM )
  21. ACPI: XSDT 0x000000003FF69E78 00004C (v01 IBM TP-1Q 00003020 LTP 00000000)
  22. ACPI: FACP 0x000000003FF69F00 0000F4 (v03 IBM TP-1Q 00003020 IBM 00000001)
  23. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20190405/tbfadt-642)
  24. Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20190405/tbfadt-693)
  25. ACPI: DSDT 0x000000003FF6A0E7 00CD2A (v01 IBM TP-1Q 00003020 MSFT 0100000E)
  26. ACPI: FACS 0x000000003FF78000 000040
  27. ACPI: SSDT 0x000000003FF6A0B4 000033 (v01 IBM TP-1Q 00003020 MSFT 0100000E)
  28. ACPI: ECDT 0x000000003FF76E11 000052 (v01 IBM TP-1Q 00003020 IBM 00000001)
  29. ACPI: TCPA 0x000000003FF76E63 000032 (v01 IBM TP-1Q 00003020 PTL 00000001)
  30. ACPI: BOOT 0x000000003FF76FD8 000028 (v01 IBM TP-1Q 00003020 LTP 00000001)
  31. ACPI: 2 ACPI AML tables successfully acquired and loaded
  32. cpu0 at mainbus0
  33. cpu0: Intel(R) Pentium(R) M processor 1600MHz, id 0x695
  34. cpu0: package 0, core 0, smt 0
  35. acpi0 at mainbus0: Intel ACPICA 20190405
  36. acpi0: X/RSDT: OemId <IBM ,TP-1Q ,00003020>, AslId < LTP,00000000>
  37. acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
  38. LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
  39. LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
  40. LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
  41. LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
  42. LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
  43. LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
  44. LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
  45. LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
  46. LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
  47. LNKC: ACPI: Found matching pin for 2.0.INTC at func 2: 11
  48. LNKA: ACPI: Found matching pin for 2.1.INTA at func 0: 11
  49. LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11
  50. acpi0: SCI interrupting at int 9
  51. acpi0: fixed power button present
  52. timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
  53. acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
  54. MEM (PNP0C01) at acpi0 not configured
  55. acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
  56. acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
  57. SIO (PNP0C02) at acpi0 not configured
  58. attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
  59. pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
  60. midi0 at pcppi1: PC speaker
  61. sysbeep0 at pcppi1
  62. FPU (PNP0C04) at acpi0 not configured
  63. pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
  64. pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
  65. FDC (PNP0700) at acpi0 not configured
  66. LPT (PNP0400) at acpi0 not configured
  67. acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
  68. acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
  69. thinkpad0 at acpi0 (HKEY, IBM0068)
  70. acpivga0 at acpi0 (VID): ACPI Display Adapter
  71. acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
  72. acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
  73. acpivga0: connected output devices:
  74. acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
  75. acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
  76. acpitz0 at acpi0 (THM0)
  77. acpitz0: levels: critical 91.0 C, passive 85.5 C, passive cooling
  78. apm0 at acpi0: Power Management spec V1.2
  79. attimer1: attached to pcppi1
  80. pckbd0 at pckbc1 (kbd slot)
  81. pckbc1: using irq 1 for kbd slot
  82. wskbd0 at pckbd0: console keyboard
  83. pms0 at pckbc1 (aux slot)
  84. pckbc1: using irq 12 for aux slot
  85. wsmouse0 at pms0 mux 0
  86. pci0 at mainbus0 bus 0: configuration mode 1
  87. pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
  88. pchb0 at pci0 dev 0 function 0: vendor 8086 product 3340 (rev. 0x03)
  89. agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
  90. ppb0 at pci0 dev 1 function 0: vendor 8086 product 3341 (rev. 0x03)
  91. pci1 at ppb0 bus 1
  92. pci1: i/o space, memory space enabled
  93. vga0 at pci1 dev 0 function 0: vendor 1002 product 4c59 (rev. 0x00)
  94. wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
  95. wsmux1: connecting to wsdisplay0
  96. drm at vga0 not configured
  97. uhci0 at pci0 dev 29 function 0: vendor 8086 product 24c2 (rev. 0x01)
  98. uhci0: interrupting at irq 11
  99. usb0 at uhci0: USB revision 1.0
  100. uhci1 at pci0 dev 29 function 1: vendor 8086 product 24c4 (rev. 0x01)
  101. uhci1: interrupting at irq 11
  102. usb1 at uhci1: USB revision 1.0
  103. uhci2 at pci0 dev 29 function 2: vendor 8086 product 24c7 (rev. 0x01)
  104. uhci2: interrupting at irq 11
  105. usb2 at uhci2: USB revision 1.0
  106. ehci0 at pci0 dev 29 function 7: vendor 8086 product 24cd (rev. 0x01)
  107. ehci0: interrupting at irq 11
  108. ehci0: EHCI version 1.0
  109. ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
  110. usb3 at ehci0: USB revision 2.0
  111. ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x81)
  112. pci2 at ppb1 bus 2
  113. pci2: i/o space, memory space enabled
  114. cbb0 at pci2 dev 0 function 0: vendor 1180 product 0476 (rev. 0xaa)
  115. cbb1 at pci2 dev 0 function 1: vendor 1180 product 0476 (rev. 0xaa)
  116. fwohci0 at pci2 dev 0 function 2: vendor 1180 product 0552 (rev. 0x02)
  117. fwohci0: interrupting at irq 11
  118. fwohci0: OHCI version 1.0 (ROM=0)
  119. fwohci0: No. of Isochronous channels is 4.
  120. fwohci0: EUI64 00:06:1b:03:29:01:d6:8e
  121. fwohci0: Phy 1394a available S400, 2 ports.
  122. fwohci0: Link S400, max_rec 2048 bytes.
  123. ieee1394if0 at fwohci0: IEEE1394 bus
  124. fwip0 at ieee1394if0: IP over IEEE1394
  125. fwohci0: Initiate bus reset
  126. fwohci0: Clear PME# now
  127. wm0 at pci2 dev 1 function 0, 32-bit DMA: Intel i82540EP 1000BASE-T Ethernet (rev. 0x03)
  128. wm0: interrupting at irq 11
  129. wm0: 32-bit 33MHz PCI bus
  130. wm0: 64 words (6 address bits) MicroWire EEPROM
  131. wm0: RX packet buffer size: 48KB
  132. wm0: Ethernet address 00:0d:60:cc:2e:69
  133. wm0: 0x200002<LOCK_EECD,WOL>
  134. makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
  135. makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  136. ath0 at pci2 dev 2 function 0: Atheros 5212
  137. ath0: interrupting at irq 11
  138. ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  139. ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  140. ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  141. ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3
  142. cbb0: cacheline 0x0 lattimer 0x40
  143. cbb0: bhlc 0x824000
  144. cbb0: interrupting at irq 11
  145. cardslot0 at cbb0
  146. cardbus0 at cardslot0: bus 3
  147. pcmcia0 at cardslot0
  148. cbb1: cacheline 0x0 lattimer 0x40
  149. cbb1: bhlc 0x824000
  150. cbb1: interrupting at irq 11
  151. cardslot1 at cbb1
  152. cardbus1 at cardslot1: bus 6
  153. pcmcia1 at cardslot1
  154. ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 24cc (rev. 0x01)
  155. timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
  156. ichlpcib0: 24-bit timer
  157. tco0 at ichlpcib0: TCO (watchdog) timer configured.
  158. tco0: Min/Max interval 2/37 seconds
  159. ichlpcib0: SpeedStep enabled
  160. piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
  161. piixide0: bus-master DMA support present
  162. piixide0: primary channel configured to compatibility mode
  163. piixide0: primary channel interrupting at irq 14
  164. atabus0 at piixide0 channel 0
  165. piixide0: secondary channel configured to compatibility mode
  166. piixide0: secondary channel interrupting at irq 15
  167. atabus1 at piixide0 channel 1
  168. ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 24c3 (rev. 0x01)
  169. ichsmb0: interrupting at irq 11
  170. iic0 at ichsmb0: I2C bus
  171. auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
  172. auich0: interrupting at irq 11
  173. auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
  174. auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
  175. vendor 8086 product 24c6 (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
  176. isa0 at ichlpcib0
  177. lpt2 at isa0 port 0x3bc-0x3bf irq : polled
  178. fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
  179. est0 at cpu0: Enhanced SpeedStep
  180. fwohci0: BUS reset
  181. fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
  182. ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
  183. ieee1394if0: bus manager 0
  184. timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
  185. auich0: measured ac97 link rate at 48000 Hz
  186. audio0 at auich0: playback, capture, full duplex, independent
  187. audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
  188. audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
  189. fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
  190. acpiacad0: AC adapter online.
  191. uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
  192. uhub0: 2 ports with 2 removable, self powered
  193. uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
  194. uhub1: 2 ports with 2 removable, self powered
  195. uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
  196. uhub2: 2 ports with 2 removable, self powered
  197. uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
  198. uhub3: 6 ports with 6 removable, self powered
  199. IPsec: Initialized Security Association Processing.
  200. acpibat0: BND LION rechargeable battery
  201. acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
  202. umass0 at uhub3 port 3 configuration 1 interface 0
  203. umass0: SanDisk (0x781) Cruzer Blade (0x5567), rev 2.00/1.26, addr 2
  204. umass0: using SCSI over Bulk-Only
  205. scsibus0 at umass0: 2 targets, 1 lun per target
  206. sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, 1.26> disk removable
  207. sd0: 7633 MB, 15509 cyl, 16 head, 63 sec, 512 bytes/sect x 15633408 sectors
  208. wd0 at atabus0 drive 0
  209. wd0: <HITACHI_DK23EA-40>
  210. wd0: drive supports 16-sector PIO transfers, LBA addressing
  211. wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
  212. wd0: 32-bit data port
  213. wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
  214. wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
  215. boot device: wd0
  216. root on wd0a dumps on wd0b
  217. root file system type: ffs
  218. kern.module.path=/stand/i386/9.4/modules
  219. wsdisplay0: screen 1 added (80x25, vt100 emulation)
  220. wsdisplay0: screen 2 added (80x25, vt100 emulation)
  221. wsdisplay0: screen 3 added (80x25, vt100 emulation)
  222. wsdisplay0: screen 4 added (80x25, vt100 emulation)
  223.  
Tags: dmesg netbsd
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!