Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # This is loader.conf - a file full of useful variables that you can
- # set to change the default load behavior of your system. You should
- # not edit this file! Put any overrides into one of the
- # loader_conf_files instead and you will be able to update these
- # defaults later without spamming your local configuration information.
- #
- # All arguments must be in double quotes.
- #
- # $FreeBSD: src/sys/boot/forth/loader.conf,v 1.122 2007/09/26 08:38:25 ru Exp $
- ##############################################################
- ### Basic configuration options ############################
- ##############################################################
- exec=".( Loading /boot/defaults/loader.conf ) cr"
- kernel="kernel" # /boot sub-directory containing kernel and modules
- bootfile="kernel" # Kernel name (possibly absolute path)
- kernel_options="" # Flags to be passed to the kernel
- loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.local.conf"
- nextboot_conf="/boot/nextboot.conf"
- nextboot_enable="NO"
- verbose_loading="NO" # Set to YES for verbose loader output
- ##############################################################
- ### Splash screen configuration ############################
- ##############################################################
- splash_pcx_load="NO" # Set this to YES for pcx splash screen!
- vesa_load="NO" # Set this to YES to load the vesa module
- #splash_bmp_load="YES" # Set this to YES for bmp splash screen!
- splash_bmp_load="NO" # Set this to YES for bmp splash screen!
- #bitmap_load="YES" # Set this to YES if you want splash screen!
- bitmap_load="NO" # Set this to YES if you want splash screen!
- bitmap_name="/boot/splash.bmp" # Set this to the name of the bmp or pcx file
- bitmap_type="splash_image_data" # and place it on the module_path
- ##############################################################
- ### Loader settings ########################################
- ##############################################################
- autoboot_delay="7" # Delay in seconds before autobooting,
- # set to -1 if you don't want user to be
- # allowed to interrupt autoboot process and
- # escape to the loader prompt, set to
- # "NO" to disable autobooting
- loader_color="YES"
- beastie_disable="NO" # Turn the beastie boot menu on and off
- loader_logo="beastie" # Desired logo: fbsdbw, beastiebw, beastie, none
- #comconsole_speed="9600" # Set the current serial console speed
- #console="vidconsole" # A comma separated list of console(s)
- #currdev="disk1s1a" # Set the current device
- module_path="/boot/modules" # Set the module search path
- #prompt="\\${interpret}" # Set the command prompt
- #root_disk_unit="0" # Force the root disk unit number
- #rootdev="disk1s1a" # Set the root filesystem
- graphics_enable="YES"
- beastie_theme="/boot/themes/default/theme.conf"
- ##############################################################
- ### Kernel settings ########################################
- ##############################################################
- # The following boot_ variables are enabled by setting them to any value.
- # Their presence in the kernel environment (see kenv(1)) has the same
- # effect as setting the given boot flag (see boot(8)).
- #boot_askname="" # -a: Prompt the user for the name of the root device
- #boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM
- #boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger
- #boot_dfltroot="" # -r: Use the statically configured root file system
- #boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger
- #boot_multicons="" # -D: Use multiple consoles
- #boot_mute="" # -m: Mute the console
- #boot_pause="" # -p: Pause after each line during device probing
- #boot_serial="" # -h: Use serial console
- #boot_single="" # -s: Start system in single-user mode
- #boot_verbose="" # -v: Causes extra debugging information to be printed
- #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall"
- # Sets the list of init candidates
- #init_shell="/bin/sh" # The shell binary used by init(8).
- #init_script="" # Initial script to run by init(8) before chrooting.
- #init_chroot="" # Directory for init(8) to chroot into.
- ##############################################################
- ### Kernel tunables ########################################
- ##############################################################
- #hw.physmem="1G" # Limit physical memory. See loader(8)
- #kern.dfldsiz="" # Set the initial data size limit
- #kern.dflssiz="" # Set the initial stack size limit
- #kern.hz="100" # Set the kernel interval timer rate
- #kern.maxbcache="" # Set the max buffer cache KVA storage
- #kern.maxdsiz="" # Set the max data size
- #kern.maxfiles="" # Set the sys. wide open files limit
- #kern.maxproc="" # Set the maximum # of processes
- #kern.maxssiz="" # Set the max stack size
- #kern.maxswzone="" # Set the max swmeta KVA storage
- #kern.maxtsiz="" # Set the max text size
- #kern.maxusers="32" # Set size of various static tables
- #kern.nbuf="" # Set the number of buffer headers
- #kern.ncallout="" # Set the maximum # of timer events
- #kern.sgrowsiz="" # Set the amount to grow stack
- #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
- #kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable
- #kern.ipc.nmbclusters="" # Set the number of mbuf clusters
- #kern.ipc.nmbufs="" # Set the maximum number of mbufs
- #kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs
- #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
- #vfs.root.mountfrom="" # Specify root partition in a way the
- # kernel understands
- #vm.kmem_size="" # Sets the size of kernel memory (bytes)
- #debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on
- #debug.ktr.mask="0x1200" # Bitmask of KTR events to enable
- #debug.ktr.verbose="1" # Enable console dump of KTR events
- #net.graph.maxalloc="128" # Maximum number of queue items to allocate
- ##############################################################
- ### Filesystem and related modules #########################
- ##############################################################
- # Filesystems
- cd9660_load="NO" # ISO 9660 filesystem
- coda_load="NO" # CODA filesystem
- fdescfs_load="NO" # Filedescriptors filesystem
- linprocfs_load="NO" # Linux compatibility process filesystem
- linsysfs_load="NO" # Linux compatibility system filesystem
- msdosfs_load="NO" # FAT-12/16/32
- nfsclient_load="NO" # NFS client
- nfsserver_load="NO" # NFS server
- ntfs_load="NO" # NTFS
- nullfs_load="NO" # Null filesystem
- portalfs_load="NO" # Portal filesystem
- procfs_load="NO" # Process filesystem
- reiserfs_load="NO" # ReiserFS
- unionfs_load="NO" # Union filesystem
- xfs_load="NO" # XFS
- zfs_load="NO" # ZFS
- # Related stuff
- geom_bde_load="NO" # Disk encryption driver (see gbde(4,8))
- geom_ccd_load="NO" # Concatenated disk driver (see ccd(4),
- # ccdconfig(8))
- geom_concat_load="NO" # Concatenated disk driver (see gconcat(8))
- geom_eli_load="NO" # Disk encryption driver (see geli(8))
- geom_gate_load="NO" # Userland disk driver (see geom_gate(4),
- # ggatec(8), ggated(8), ggatel(8))
- geom_label_load="NO" # File system labels (see glabel(8))
- geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see
- # md(4), mdconfig(8))
- geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8))
- geom_nop_load="NO" # Transparent disk driver (see gnop(8))
- geom_raid3_load="NO" # RAID3 disk driver (see graid3(8))
- geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8))
- geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8))
- geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8))
- geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4))
- ##############################################################
- ### Screen saver modules ###################################
- ##############################################################
- # This is best done in rc.conf
- screensave_load="NO" # Set to YES to load a screensaver module
- #screensave_name="daemon_saver" # Set to the name of the screensaver module
- ##############################################################
- ### Emulation modules ######################################
- ##############################################################
- ibcs2_load="NO" # IBCS2 (SCO) emulation
- ibcs2_coff_load="NO"
- linux_load="NO" # Linux emulation
- nvidia_load="YES"
- svr4_load="NO" # SystemV R4 emulation
- streams_load="NO" # System V streams module
- atapicam_load="YES" # SCSI emulation for ATAPI CD-ROM
- ##############################################################
- ### Networking modules #####################################
- ##############################################################
- if_disc_load="NO" # Discard device
- if_ef_load="NO" # pseudo-device providing support for multiple
- # ethernet frame types
- if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface
- if_gif_load="NO" # generic tunnel interface
- if_gre_load="NO" # encapsulating network device
- if_ppp_load="NO" # Kernel ppp
- if_sl_load="NO" # SLIP
- if_stf_load="NO" # 6to4 tunnel interface
- if_tap_load="NO" # Ethernet tunnel software network interface
- if_tun_load="NO" # Tunnel driver (user process ppp)
- if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
- ipfw_load="NO" # Firewall
- pf_load="NO" # packet filter
- ##############################################################
- ### Networking drivers #####################################
- ##############################################################
- miibus_load="NO" # miibus support, needed for some drivers
- if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
- if_ar_load="NO" # Digi SYNC/570i
- if_arl_load="NO" # Aironet Arlan 655 wireless network adapter
- if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs
- if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet
- if_awi_load="NO" # AMD PCnetMobile IEEE 802.11 wireless NICs
- if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet
- if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet
- if_bfe_load="NO" # Broadcom BCM4401
- if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
- if_cm_load="NO" # SMC (90c26, 90c56, 90c66)
- if_cs_load="NO" # Crystal Semiconductor CS8920
- if_cue_load="NO" # CATC USB-EL1210A USB Ethernet
- if_dc_load="NO" # DEC/Intel 21143 and various workalikes
- if_de_load="NO" # DEC DC21x4x Ethernet
- if_ed_load="NO" # National Semiconductor DS8390/WD83C690
- # Ethernet
- if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
- if_en_load="NO" # Midway-based ATM interfaces
- if_ep_load="NO" # 3Com Etherlink III (3c5x9)
- if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet
- if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet
- # adapters
- if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
- if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC
- if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet
- if_ie_load="NO" # Intel 82586
- if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless
- if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG
- # wireless
- if_ixgb_load="NO" # Intel PRO/10Gb Ethernet
- if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet
- if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit
- # Ethernet
- if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet
- if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet
- if_my_load="NO" # Myson PCI Fast Ethernet
- if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter
- if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet
- if_nve_load="NO" # NVIDIA nForce MCP Networking Adapter
- if_oltr_load="NO" # Olicom
- if_pcn_load="NO" # AMD PCnet PCI
- if_ray_load="NO" # Raytheon Raylink/Webgear Aviator PCCard
- if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S
- if_rl_load="NO" # RealTek 8129/8139
- if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet
- if_sbni_load="NO" # Granch SBNI12 leased line adapters
- if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
- if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
- if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet
- if_sn_load="NO" # SMC 91Cxx
- if_sr_load="NO" # synchronous RISCom/N2 / WANic 400/405
- if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet
- if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet
- if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
- if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
- if_tx_load="NO" # SMC 83c17x Fast Ethernet
- if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
- if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet
- if_udav_load="NO" # Davicom DM9601 USB Ethernet
- if_vr_load="NO" # VIA Rhine I and Rhine II
- if_vx_load="NO" # 3Com 3C590 family
- if_wb_load="NO" # Winbond W89C840F
- if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
- if_xe_load="NO" # Xircom CreditCard PCMCIA
- if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
- ##############################################################
- ### Netgraph modules #######################################
- ##############################################################
- ng_UI_load="NO" # UI netgraph node type
- ng_async_load="NO" # asynchronous framing netgraph node type
- ng_bpf_load="NO" # Berkeley packet filter netgraph node type
- ng_bridge_load="NO" # Ethernet bridging netgraph node type
- ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
- ng_echo_load="NO" # Netgraph echo node type
- ng_eiface_load="NO" # generic Ethernet interface netgraph node type
- ng_etf_load="NO" # Ethertype filtering netgraph node type
- ng_ether_load="NO" # Ethernet netgraph node type
- ng_fec_load="NO" # netgraph Fast EtherChannel node
- ng_frame_relay_load="NO" # frame relay netgraph node type
- ng_gif_load="NO" # generic tunnel interface netgraph node type
- ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes
- ng_hole_load="NO" # Netgraph discard node type
- ng_hub_load="NO" # packet distribution netgraph node type
- ng_iface_load="NO" # interface Netgraph node type
- ng_ip_input_load="NO" # netgraph IP input node type
- ng_ksocket_load="NO" # kernel socket netgraph node type
- ng_l2tp_load="NO" # L2TP protocol netgraph node type
- ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
- ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and
- # encryption netgraph node type
- ng_netflow_load="NO" # Cisco's NetFlow netgraph node type
- ng_one2many_load="NO" # packet multiplexing netgraph node type
- ng_ppp_load="NO" # PPP protocol netgraph node type
- ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
- ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
- ng_rfc1490_load="NO" # RFC 1490 netgraph node type
- ng_socket_load="NO" # Netgraph socket node type
- ng_split_load="NO" # netgraph node to separate incoming and
- # outgoing flows
- ng_sppp_load="NO" # sppp netgraph node type
- ng_tee_load="NO" # Netgraph ``tee'' node type
- ng_tty_load="NO" # Netgraph node type that is also a line
- # discipline
- ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
- ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type
- ##############################################################
- ### Sound modules ##########################################
- ##############################################################
- sound_load="NO" # Digital sound subsystem
- snd_ad1816_load="NO" # ad1816
- snd_als4000_load="NO" # als4000
- snd_atiixp_load="NO" # atiixp
- snd_cmi_load="NO" # cmi
- snd_cs4281_load="NO" # cs4281
- snd_csa_load="NO" # csa
- snd_ds1_load="NO" # ds1
- snd_emu10k1_load="NO" # Creative Sound Blaster Live
- snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy
- snd_envy24_load="NO" # VIA Envy24
- snd_envy24ht_load="NO" # VIA Envy24HT
- snd_es137x_load="NO" # es137x
- snd_ess_load="NO" # ess
- snd_fm801_load="NO" # fm801
- snd_hda_load="NO" # Intel High Definition Audio (Controller)
- snd_ich_load="NO" # Intel ICH
- snd_maestro_load="NO" # Maestro
- snd_maestro3_load="NO" # Maestro3
- snd_mss_load="NO" # Mss
- snd_neomagic_load="NO" # Neomagic
- snd_sb16_load="NO" # Sound Blaster 16
- snd_sb8_load="NO" # Sound Blaster Pro
- snd_sbc_load="NO" # Sbc
- snd_solo_load="NO" # Solo
- snd_spicds_load="NO" # SPI codecs
- snd_t4dwave_load="NO" # t4dwave
- snd_via8233_load="NO" # via8233
- snd_via82c686_load="NO" # via82c686
- snd_vibes_load="NO" # vibes
- snd_driver_load="NO" # All sound drivers
- ##############################################################
- ### USB modules ############################################
- ##############################################################
- usb_load="NO" # USB subsystem
- udbp_load="NO" # USB double bulk pipe host 2 host cables
- ugen_load="NO" # USB generic device, if all else fails ...
- ufm_load="NO" # Fm Radio
- uhid_load="NO" # Human Interface Devices
- ukbd_load="NO" # Keyboard
- ulpt_load="NO" # Printer
- ums_load="NO" # Mouse
- umass_load="NO" # Mass Storage Devices
- umodem_load="NO" # Modems
- uscanner_load="NO" # Scanners
- if_aue_load="NO" # ADMtek USB ethernet
- if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
- if_cue_load="NO" # CATC USB ethernet
- if_kue_load="NO" # Kawasaki LSI USB ethernet
- snd_uaudio_load="NO" # USB audio
- ##############################################################
- ### Other modules ##########################################
- ##############################################################
- bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
- ispfw_load="NO" # Qlogic ISP Firmware
- agp_load="NO" # agp module
- accf_data_load="NO" # Wait for data accept filter
- accf_http_load="NO" # Wait for full HTTP request accept filter
- random_load="NO" # Random device
- speaker_load="NO" # AT speaker module
- ##############################################################
- ### ACPI settings ##########################################
- ##############################################################
- acpi_dsdt_load="NO" # DSDT Overriding
- acpi_dsdt_type="acpi_dsdt" # Don't change this
- acpi_dsdt_name="/boot/acpi_dsdt.aml"
- # Override DSDT in BIOS by this file
- acpi_video_load="NO" # Load the ACPI video extension driver
- ##############################################################
- ### TrustedBSD MAC settings ##################################
- ##############################################################
- mac_biba_load="NO" # Biba MAC policy
- mac_bsdextended_load="NO" # BSD/extended MAC policy
- mac_ifoff="NO" # Interface silencing policy
- mac_mls_load="NO" # MLS MAC policy
- mac_none_load="NO" # Null MAC policy
- mac_partition_load="NO" # Partition MAC policy
- mac_seeotheruids_load="NO" # UID visbility MAC policy
- ##############################################################
- ### Module loading syntax example ##########################
- ##############################################################
- #module_load="YES" # loads module "module"
- #module_name="realname" # uses "realname" instead of "module"
- #module_type="type" # passes "-t type" to load
- #module_flags="flags" # passes "flags" to the module
- #module_before="cmd" # executes "cmd" before loading the module
- #module_after="cmd" # executes "cmd" after loading the module
- #module_error="cmd" # executes "cmd" if load fails
- ##############################################################
- ### Always try to load ZFS pool cache file #################
- ##############################################################
- #zpool_cache_load="YES"
- #zpool_cache_type="/boot/zfs/zpool.cache"
- #zpool_cache_name="/boot/zfs/zpool.cache"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement