Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- pci 0000:00:05.0: PREFETCH window: disabled
- pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
- pci 0000:00:06.0: IO window: disabled
- pci 0000:00:06.0: MEM window: disabled
- pci 0000:00:06.0: PREFETCH window: disabled
- pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
- pci 0000:00:07.0: IO window: disabled
- pci 0000:00:07.0: MEM window: disabled
- pci 0000:00:07.0: PREFETCH window: disabled
- pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09
- pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff
- pci 0000:08:01.0: IO window: 0x00a800-0x00a8ff
- pci 0000:08:01.0: PREFETCH window: 0x50000000-0x53ffffff
- pci 0000:08:01.0: MEM window: 0x58000000-0x5bffffff
- pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
- pci 0000:00:14.4: IO window: 0xa000-0xafff
- pci 0000:00:14.4: MEM window: 0xc0300000-0xc03fffff
- pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff
- pci 0000:00:04.0: enabling device (0000 -> 0002)
- pci 0000:00:04.0: setting latency timer to 64
- pci 0000:00:05.0: setting latency timer to 64
- pci 0000:00:06.0: setting latency timer to 64
- pci 0000:00:07.0: setting latency timer to 64
- pci 0000:08:01.0: enabling device (0000 -> 0003)
- pci 0000:08:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
- pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
- pci_bus 0000:01: resource 2 mem: [0xc8000000-0xcfffffff]
- pci_bus 0000:01: resource 3 mem: [0x0-0x0]
- pci_bus 0000:02: resource 0 mem: [0x0-0x0]
- pci_bus 0000:02: resource 1 mem: [0xc0200000-0xc02fffff]
- pci_bus 0000:02: resource 2 mem: [0x0-0x0]
- pci_bus 0000:02: resource 3 mem: [0x0-0x0]
- pci_bus 0000:03: resource 0 mem: [0x0-0xfff]
- pci_bus 0000:03: resource 1 mem: [0x0-0xfffff]
- pci_bus 0000:03: resource 2 mem: [0x0-0x0]
- pci_bus 0000:03: resource 3 mem: [0x0-0x0]
- pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
- pci_bus 0000:06: resource 1 mem: [0x0-0xfffff]
- pci_bus 0000:06: resource 2 mem: [0x0-0x0]
- pci_bus 0000:06: resource 3 mem: [0x0-0x0]
- pci_bus 0000:07: resource 0 mem: [0x0-0xfff]
- pci_bus 0000:07: resource 1 mem: [0x0-0xfffff]
- pci_bus 0000:07: resource 2 mem: [0x0-0x0]
- pci_bus 0000:07: resource 3 mem: [0x0-0x0]
- pci_bus 0000:08: resource 0 io: [0xa000-0xafff]
- pci_bus 0000:08: resource 1 mem: [0xc0300000-0xc03fffff]
- pci_bus 0000:08: resource 2 mem: [0x50000000-0x53ffffff]
- pci_bus 0000:08: resource 3 io: [0x00-0xffff]
- pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
- pci_bus 0000:09: resource 0 io: [0xa400-0xa4ff]
- pci_bus 0000:09: resource 1 io: [0xa800-0xa8ff]
- pci_bus 0000:09: resource 2 mem: [0x50000000-0x53ffffff]
- pci_bus 0000:09: resource 3 mem: [0x58000000-0x5bffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- Simple Boot Flag at 0x36 set to 0x1
- audit: initializing netlink socket (disabled)
- type=2000 audit(1245796037.164:1): initialized
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1751
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler cfq registered (default)
- pci 0000:00:00.0: MSI quirk detected; MSI disabled
- pci 0000:01:05.0: Boot video device
- pcieport-driver 0000:00:04.0: setting latency timer to 64
- pcieport-driver 0000:00:05.0: setting latency timer to 64
- pcieport-driver 0000:00:06.0: setting latency timer to 64
- pcieport-driver 0000:00:07.0: setting latency timer to 64
- aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
- aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
- aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
- aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- Uniform Multi-Platform E-IDE driver
- atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
- pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0x8420-0x8427
- atiixp 0000:00:14.1: simplex device: DMA disabled
- ide1: DMA disabled
- Probing IDE interface ide0...
- Switched to high resolution mode on CPU 0
- hda: PIONEER DVD-RW DVR-K17RS, ATAPI CD/DVD-ROM drive
- hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- hda: UDMA/33 mode selected
- Probing IDE interface ide1...
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide1 at 0x170-0x177,0x376 on irq 15
- ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
- ide-gd driver 1.18
- Driver 'sd' needs updating - please use bus_type methods
- sata_sil 0000:00:12.0: version 2.4
- sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
- sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- scsi0 : sata_sil
- scsi1 : sata_sil
- ata1: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 22
- ata2: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 22
- PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
- i8042.c: Detected active multiplexing controller, rev 1.1.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP bic registered
- NET: Registered protocol family 17
- Using IPI Shortcut mode
- input: AT Translated Set 2 keyboard as /class/input/input0
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
- ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda:<6>ata2: SATA link down (SStatus 0 SControl 310)
- Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
- input: SynPS/2 Synaptics TouchPad as /class/input/input1
- sda1 sda2 < sda5 sda6 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
- Freeing unused kernel memory: 284k freed
- ACPI: AC Adapter [ACAD] (on-line)
- processor ACPI_CPU:00: registered as cooling_device0
- ACPI: Battery Slot [BAT1] (battery absent)
- input: Power Button (FF) as /class/input/input2
- ACPI: Power Button (FF) [PWRF]
- input: Power Button (CM) as /class/input/input3
- ACPI: Power Button (CM) [PWRB]
- input: Lid Switch as /class/input/input4
- ACPI: Lid Switch [LID]
- input: Sleep Button (CM) as /class/input/input5
- ACPI: Sleep Button (CM) [SLPB]
- ACPI: WMI: Mapper loaded
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (59 C)
- cfg80211: Using static regulatory domain info
- cfg80211: Regulatory domain: US
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- cfg80211: Calling CRDA for country: US
- k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- input: PC Speaker as /class/input/input6
- Linux agpgart interface v0.103
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- yenta_cardbus 0000:08:01.0: CardBus bridge found [1025:010f]
- yenta_cardbus 0000:08:01.0: Using CSCINT to route CSC interrupts to PCI
- yenta_cardbus 0000:08:01.0: Routing CardBus interrupts to PCI
- yenta_cardbus 0000:08:01.0: TI: mfunc 0x00001202, devctl 0x44
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ehci_hcd 0000:00:13.2: EHCI Host Controller
- ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000
- 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- ide-cd driver 5.00
- ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2000kB Cache
- Uniform CD-ROM driver Revision: 3.20
- ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- yenta_cardbus 0000:08:01.0: ISA IRQ mask 0x0cf8, PCI irq 23
- yenta_cardbus 0000:08:01.0: Socket status: 30000006
- pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
- yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean.
- yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
- yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
- 8139cp 0000:08:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- ath5k 0000:02:00.0: enabling device (0000 -> 0002)
- ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ath5k 0000:02:00.0: setting latency timer to 64
- ath5k 0000:02:00.0: registered as 'phy0'
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ohci_hcd 0000:00:13.0: OHCI Host Controller
- ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
- ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0005000
- acer-wmi: Acer Laptop ACPI-WMI Extras
- 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:08:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- eth0: RealTek RTL8139 at 0xa000, 00:1b:24:48:fd:8d, IRQ 20
- eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 4 ports detected
- piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
- ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ohci_hcd 0000:00:13.1: OHCI Host Controller
- ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
- ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0006000
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 4 ports detected
- phy0: Selected rate control algorithm 'minstrel'
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- Registered led device: ath5k-phy0::rx
- Registered led device: ath5k-phy0::tx
- ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
- HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1 across:1317288k
- EXT3 FS on sda1, internal journal
- loop: module loaded
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on sda6, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ processors (1 cpu cores) (version 2.20.00)
- powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x10
- powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x12
- powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x18
- Marking TSC unstable due to cpufreq changes
- Clocksource tsc unstable (delta = -176709277 ns)
- Bluetooth: Core ver 2.15
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.13
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: SCO (Voice Link) ver 0.6
- Bluetooth: SCO socket layer initialized
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [drm] Initialized drm 1.1.0 20060810
- eth0: no IPv6 routers present
- [drm] radeon default to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- [drm] radeon: Initializing kernel modesetting.
- [drm] register mmio base: 0xC0100000
- [drm] register mmio size: 65536
- [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
- [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
- [drm] Detected VRAM RAM=128M, BAR=128M
- [drm] RAM width 128bits DDR
- [drm] Clocks initialized !
- [drm] radeon: 4 pipes initialized.
- Failed to wait MC idle while programming pipes. Bad things might happen.
- [drm] radeon: VRAM 128M
- [drm] radeon: VRAM from 0x10000000 to 0x17FFFFFF
- [drm] radeon: GTT 32M
- [drm] radeon: GTT from 0x08000000 to 0x09FFFFFF
- Failed to wait MC idle while programming pipes. Bad things might happen.
- [drm] radeon: irq initialized.
- [TTM] TTM available graphics memory: 441 MiB
- [TTM] TTM available object memory: 438 MiB
- [drm] radeon: 128M of VRAM memory ready
- [drm] radeon: 32M of GTT memory ready.
- [drm] GART: num cpu pages 8192, num gpu pages 8192
- [drm] radeon: cp idle (0x10000C03)
- [drm] Loading R300 Microcode
- [drm] radeon: ring at 0x0000000008000000
- [drm] ring test succeeded in 2 usecs
- [drm] radeon: ib pool ready.
- [drm] ib test succeeded in 0 usecs
- [drm] Default TV standard: NTSC
- [drm] 14.318180000 MHz TV ref clk
- [drm] Panel ID String: QDS
- [drm] Panel Size 1280x800
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] VGA
- [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
- [drm] Encoders:
- [drm] CRT1: INTERNAL_DAC2
- [drm] Connector 1:
- [drm] LVDS
- [drm] DDC: 0x1a0 0x1a0 0x1a0 0x1a0 0x1a0 0x1a0 0x1a4 0x1a4
- [drm] Encoders:
- [drm] LCD1: INTERNAL_LVDS
- i2c-adapter i2c-1: unable to read EDID block.
- radeon 0000:01:05.0: VGA-1: no EDID data
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [drm] fb mappable at 0xF8A80000
- [drm] vram apper at 0xC8000000
- [drm] size 4096000
- [drm] fb depth is 24
- [drm] pitch is 5120
- fb0: radeondrmfb frame buffer device
- registered panic notifier
- [drm] radeon: kernel modesetting successfully initialized.
- [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
- wlan0: authenticate with AP 00:1f:33:f8:70:7a
- wlan0: authenticated
- wlan0: associate with AP 00:1f:33:f8:70:7a
- wlan0: RX AssocResp from 00:1f:33:f8:70:7a (capab=0x421 status=0 aid=1)
- wlan0: associated
- ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- wlan0: disassociating by local choice (reason=3)
- wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement