Hellcat Strip & VIN Removal.

2023-03-30 15:28:51 ★ Cletus Taylor opens the tailgate on his Ford F-350, then heads over to the toolbox.
2023-03-30 15:29:29 ★ Cletus Taylor grabs his thick leather mechanic's gloves, slipping them on and opens the toolbox.
2023-03-30 15:29:50 ★ Cletus Taylor grabs the ratchet set from within the toolbox, then heads over to the ramp.
2023-03-30 15:30:13 ★ Cletus Taylor places the ratchet set down on the ramp and opens it, he'd grab the electric ratchet ---
2023-03-30 15:30:29 ★ from within, then heads over to the wall and grabs the battery soon after slotting it in.      ((Cletus Taylor))
2023-03-30 15:30:41 ★ Cletus Taylor heads back to the Hellcat, continuing to open the driver's door.
2023-03-30 15:30:59 ★ Cletus Taylor reaches over to the toolbox, grabbing the sharp pin removal tool and goes about ---
2023-03-30 15:31:17 ★ pressing the release pin on the door harness in; soon after disconnecting the wire.      ((Cletus Taylor))
2023-03-30 15:31:45 ★ Cletus Taylor drops the harness, allowing it to hang freely then grabs the electric ratchet.
2023-03-30 15:32:09 ★ Cletus Taylor flips the switch on the ratchet to spin in reverse, thus allowing it to spin left to loosen
2023-03-30 15:32:21 ★ bolts, he'd eye the door hinge bolts identifying their size.      ((Cletus Taylor))
2023-03-30 15:32:35 ★ Cletus Taylor grabs the proper socket from within the kit, attaching it to his ratchet.
2023-03-30 15:33:06 ★ Cletus Taylor goes about loosening the two bolts on the upper door hinge, then focuses on the ---
2023-03-30 15:33:32 ★ bottom hinge in order to loosen its bolts; he'd intentionally leave one bolt secure.      ((Cletus Taylor))
2023-03-30 15:33:57 ★ Cletus Taylor grabs the door with his left hand, holding it firmly as he continues to loosen the final ---
2023-03-30 15:34:12 ★ bolt, thus allowing the door to be lifted off.      ((Cletus Taylor))
2023-03-30 15:34:28 ★ Cletus Taylor places the ratchet on the driver's seat, then continues to grab the door with -
2023-03-30 15:34:40 ★ both hands firmly, continuing to lift it off of the hinge.      ((Cletus Taylor))
2023-03-30 15:34:52 ★ Cletus Taylor carries the door over to the stack of old rubber tires, placing it down ontop.
2023-03-30 15:35:14 ★ Cletus Taylor goes over the door, removing the loose glass shards from the window; tossing them ---
2023-03-30 15:35:19 ★ over into the trashcan.      ((Cletus Taylor))
2023-03-30 15:35:51 ★ Cletus Taylor grabs the door with both hands, lifting it up and continues to carry it over to the truck.
2023-03-30 15:36:05 ★ Cletus Taylor places the door on the back of the truck, leaning it up neatly.
2023-03-30 15:36:20 ★ Cletus Taylor heads back to the Hellcat and grabs his ratchet from the seat, he soon after opens the ---
2023-03-30 15:36:28 ★ rear-left door and eyes the hinges.      ((Cletus Taylor))
2023-03-30 15:36:47 ★ Cletus Taylor reaches up to the upper hinge, continuing to loosen each of the bolts one-by-one ---
2023-03-30 15:37:04 ★ soon after continuing to get to work on the bottom bolts.      ((Cletus Taylor))
2023-03-30 15:37:22 ★ Cletus Taylor loosens each bolt on the hinges, then places the ratchet down on the back seat.
2023-03-30 15:37:37 ★ Cletus Taylor grabs the pin tool, continuing to press in the release pin on the door harness.
2023-03-30 15:37:46 ★ Cletus Taylor grabs the harness firmly, tugging the ends apart.
2023-03-30 15:37:58 ★ Cletus Taylor places the pin tool into his pocket, then grabs the door firmly with both hands.
2023-03-30 15:38:08 ★ Cletus Taylor lifts the door up and carries it over to the truck, placing it on the back.
2023-03-30 15:38:35 ★ Cletus Taylor walks over to the Hellcat and grabs his ratchet from the back seat, he'd head over to the --
2023-03-30 15:38:47 ★ passenger side of the Hellcat where he'd open the front passenger door.      ((Cletus Taylor))
2023-03-30 15:38:59 ★ Cletus Taylor places the ratchet down and slips the pin tool from his pocket.
2023-03-30 15:39:30 ★ Cletus Taylor presses the release pin from the door harness in, then separates the two ends.
2023-03-30 15:39:40 ★ Cletus Taylor places the pin tool back into his pocket and grabs the ratchet.
2023-03-30 15:40:05 ★ Cletus Taylor reaches to the upper hinge, continuing to get to work on loosening the bolts on it.
2023-03-30 15:40:26 ★ Cletus Taylor would continue to loosen the bolts on the upper hinge, then moves onto the lower ---
2023-03-30 15:40:35 ★ hinge, soon afte places the ratchet down.      ((Cletus Taylor))
2023-03-30 15:40:51 ★ Cletus Taylor grabs the door with both hands, then heads over to the truck placing it on the bed.
2023-03-30 15:41:05 ★ Cletus Taylor heads back to the Hellcat once again, opening the final remaining door.
2023-03-30 15:41:30 ★ Cletus Taylor grabs the pin tool from his pocket, continuing to press the release pin in then separates --
2023-03-30 15:41:38 ★ the two ends of the harness from one another.      ((Cletus Taylor))
2023-03-30 15:41:56 ★ Cletus Taylor grabs the ratchet and goes about loosening each of the bolts between the upper and ---
2023-03-30 15:42:19 ★ lower door hinges, he'd continue to place the ratchet down then grips the door with ---      ((Cletus Taylor))
2023-03-30 15:42:34 ★ both hands, firmly lifting up on it to detach it from the hinge.      ((Cletus Taylor))
2023-03-30 15:42:44 ★ Cletus Taylor carries the door over to the truck and places it down.
2023-03-30 15:43:04 ★ Cletus Taylor heads back over to the Dodge and climbs into the back seat, he'd locate the seat ---
2023-03-30 15:43:18 ★ release, pulling on it in order to open the back seat.      ((Cletus Taylor))
2023-03-30 15:43:31 ★ Cletus Taylor climbs into the trunk and pulls on the glowing emergency release cord and pushes ---
2023-03-30 15:43:37 ★ the trunk open before crawling back out.      ((Cletus Taylor))
2023-03-30 15:44:04 ★ Cletus Taylor grabs his pin tool, continuing to press the release clip on the wiring harness in.
2023-03-30 15:44:16 ★ Cletus Taylor separates the two ends of the harness, continuing to then grab his electric ratchet.
2023-03-30 15:45:08 ★ Cletus Taylor reaches into the trunk and connects the socket on his ratchet to one of the two -
2023-03-30 15:45:28 ★ bolts on the left hand hinge, he'd press the trigger in and loosen each of the two.      ((Cletus Taylor))
2023-03-30 15:45:45 ★ Cletus Taylor leans over to the opposite side, continuing to do the same to each of the bolts; he'd ---
2023-03-30 15:46:09 ★ intentionally leave one bolt loosely in place in order to keep the trunk from falling off.      ((Cletus Taylor))
2023-03-30 15:46:25 ★ Cletus Taylor grabs the trunk with one hand, continuing to loosen the final bolt with the ratchet ---
2023-03-30 15:46:41 ★ thus freeing the trunk from the Hellcat. He'd drop the ratchet into the trunk, taking hold -      ((Cletus Taylor))
2023-03-30 15:46:52 ★ of the trunk with both hands and slides it off.      ((Cletus Taylor))
2023-03-30 15:47:03 ★ Cletus Taylor heads over to the Ford and places the trunk onto the bed of the truck.
2023-03-30 15:47:35 ★ Cletus Taylor heads back over to the trunk, continuing to peel the carpet forward exposing the plastic ---
2023-03-30 15:47:59 ★ trunk trim, he'd grab the right hand side trim and forcefully pull on it in order to pop ---      ((Cletus Taylor))
2023-03-30 15:48:06 ★ the weak plastic coupler off.      ((Cletus Taylor))
2023-03-30 15:48:25 ★ Cletus Taylor tosses the plastic trim panel into the trunk, then heads over to the drivers side.
2023-03-30 15:48:46 ★ Cletus Taylor grips the trim panel on the drivers side, pulling on it with some force, snapping it free --
2023-03-30 15:48:57 ★ from its plastic coupler, then tosses the panel into the trunk.      ((Cletus Taylor))
2023-03-30 15:49:18 ★ Cletus Taylor would've exposed the nuts on the back of the taillight assemblies, he'd now lean into ---
2023-03-30 15:49:37 ★ the trunk, eyeing the nuts on the taillight.      ((Cletus Taylor))
2023-03-30 15:49:56 ★ Cletus Taylor hops down from the ramp and grabs an adjustable wrench from the toolbox.
2023-03-30 15:50:14 ★ Cletus Taylor hops back onto the ramp, continuing to connect the mouth of his adjustable wrench ---
2023-03-30 15:50:21 ★ to one of the nuts, then adjusts it down to side.      ((Cletus Taylor))
2023-03-30 15:50:41 ★ Cletus Taylor begins to crank the nut to the left, eventually freeing it from the stud; he'd move onto ---
2023-03-30 15:50:52 ★ the remaining nuts, loosening them one-by-one.      ((Cletus Taylor))
2023-03-30 15:51:08 ★ Cletus Taylor heads over to the passenger side, continuing to do the same to the nuts on the right hand --
2023-03-30 15:51:16 ★ taillight assembly, tossing the loose nuts aside.      ((Cletus Taylor))
2023-03-30 15:51:31 ★ Cletus Taylor places the wrench into his toolbag, continuing to grab the pin tool from his pocket.
2023-03-30 15:52:03 ★ Cletus Taylor presses in on the release pin on the taillight harness, then disconnects the two ends.
2023-03-30 15:52:20 ★ Cletus Taylor would move over to the passenger side, doing the same to the harness, then palces ---
2023-03-30 15:52:28 ★ his pin tool into the toolbag for later usage.      ((Cletus Taylor))
2023-03-30 15:52:49 ★ Cletus Taylor grabs the lefthand taillight firmly, wiggling it free from the final rubber stud securing --
2023-03-30 15:52:57 ★ the taillight housing to the chassis of the Hellcat.      ((Cletus Taylor))
2023-03-30 15:53:09 ★ Cletus Taylor heads over to the Ford and places the taillight down, then heads back to the Hellca.t
2023-03-30 15:53:27 ★ Cletus Taylor grabs the remaining taillight firmly, wiggling on it in order to free the rubber stud.
2023-03-30 15:53:37 ★ Cletus Taylor heads over to the truck, carefully placig the taillight down.
2023-03-30 15:53:57 ★ Cletus Taylor heads back to the Hellcat and takes a gander at the rear bumper, he'd notice it is ---
2023-03-30 15:54:09 ★ secured with a mixture of plasic clips and metal bolts.      ((Cletus Taylor))
2023-03-30 15:55:08 ★ Cletus Taylor would eye one of the bolts, identifying its size. He'd hop down and head to the socket set.
2023-03-30 15:55:32 ★ Cletus Taylor grabs his ratchet from the bag, continuing to pop the current socket off then switches sizes
2023-03-30 15:55:58 ★ Cletus Taylor heads to the rear bumper, quickly goes about connecting the socket to each of the ---
2023-03-30 15:56:10 ★ bolts on the bumper one-by-one, pressing the trigger back loosening them.      ((Cletus Taylor))
2023-03-30 15:56:23 ★ Cletus Taylor tosses the bolts aside, then places the ratchet into his toolbag.
2023-03-30 15:56:45 ★ Cletus Taylor grabs the plastic panel popper from the toolbox, then heads to the Hellcat and goes ---
2023-03-30 15:57:01 ★ to down prying the plastic pins out one-by-one, eventually freeing the bumper.      ((Cletus Taylor))
2023-03-30 15:57:19 ★ Cletus Taylor places the tool back into his bag, then grips the bumper firmly with both hands.
2023-03-30 15:57:42 ★ Cletus Taylor wiggles the bumper side to side, eventually releasing it from its pop-in points, then ---
2023-03-30 15:57:50 ★ carries it over to the Ford and places it onto the bed.      ((Cletus Taylor))
2023-03-30 16:02:33 ★ Cletus Taylor looks at the mostly disassembled rear-end, then heads over to the front of the Hellcat.
2023-03-30 16:03:05 ★ Cletus Taylor pulls the hood release lever as he walks by, then grabs the hood and unlatches its hinge.
2023-03-30 16:03:25 ★ Cletus Taylor lifts the hood up, allowing the struts to holt it upright.
2023-03-30 16:03:45 ★ Cletus Taylor reaches into his toolbag and removes the electric ratchet from within it, he'd ---
2023-03-30 16:03:57 ★ reach towards the rubberized washer fluid hoses, popping them loose.      ((Cletus Taylor))
2023-03-30 16:04:13 ★ Cletus Taylor now reaches towards the right hand hood hinge, connecting the mouth of the ---
2023-03-30 16:04:29 ★ socket onto one of the two bolts, pressing the trigger back in order to quickly ---      ((Cletus Taylor))
2023-03-30 16:05:00 ★ loosen each of the two bolts, he'd soon after move over to the left hand hinge; ---      ((Cletus Taylor))
2023-03-30 16:05:29 ★ loosening the bolts, he'd intentionally leave one bolt loosely in place as he continues ---      ((Cletus Taylor))
2023-03-30 16:05:47 ★ to grab the hood, lowering it onto his shoulder and gripping it with his left hand.      ((Cletus Taylor))
2023-03-30 16:06:25 ★ Cletus Taylor goes ahead loosens the final bolt, thus freeing the hood and allowing it to rest on his ---
2023-03-30 16:06:41 ★ shoulder. He'd continue to place the electric ratchet into his bag, then grips the hood ---      ((Cletus Taylor))
2023-03-30 16:06:47 ★ with both hands, lifting on it.      ((Cletus Taylor))
2023-03-30 16:06:57 ★ Cletus Taylor carries the hood over to the Ford, leaning it over on the bed.
2023-03-30 16:08:26 ★ Cletus Taylor heads back to the ramp and walks to the front-end of the Hellcat, taking a look at --
2023-03-30 16:08:41 ★ the engine bay, eyeing each plastic trim piece covering the bumper.      ((Cletus Taylor))
2023-03-30 16:09:02 ★ Cletus Taylor sighs at the sighting of all the cheap plastic, continuing to grab the largest piece in ---
2023-03-30 16:09:20 ★ which covers the radiator support. He'd tug on it with some force, attempting to snap ---      ((Cletus Taylor))
2023-03-30 16:09:31 ★ all of the plastic pins at once.      ((Cletus Taylor))
2023-03-30 16:09:32 ((OOC Luck)) Cletus Taylor tries his luck from 1 to 100 and gets 16.
2023-03-30 16:09:35 ((OOC Chance at 16%)) Cletus Taylor's attempt has succeeded.
2023-03-30 16:09:46 ★ The plastic snap-in pins would pop free at once, freeing the piece.      ((Cletus Taylor))
2023-03-30 16:10:03 ★ Cletus Taylor tosses the plastic panel into the corner, continuing to look down at the back of ---
2023-03-30 16:10:20 ★ the headlight, he'd chuckle as he looks at the metal nuts.      ((Cletus Taylor))
2023-03-30 16:10:36 ★ Cletus Taylor reaches into his pocket and removes the adjustable wrench from within, then soon ---
2023-03-30 16:10:50 ★ after reaches down into the engine bay. He'd connect the mouth of his adjustable ---      ((Cletus Taylor))
2023-03-30 16:11:07 ★ wrench onto one of the nuts, adjusting it to size before cranking it to the left in order --      ((Cletus Taylor))
2023-03-30 16:11:29 ★ to loosen the nut. Once he's done removing the one nut, he'd move onto the other ---      ((Cletus Taylor))
2023-03-30 16:11:38 ★ nuts, one-by-one removing them and tossing them aside.      ((Cletus Taylor))
2023-03-30 16:11:57 ★ Cletus Taylor heads over to the passenger side, continuing to do the same to the nuts on the back ---
2023-03-30 16:12:02 ★ of the remaining headlight.      ((Cletus Taylor))
2023-03-30 16:12:21 ★ Cletus Taylor places the wrench back into his pocket, then grabs the pin tool from his pocket.
2023-03-30 16:12:41 ★ Cletus Taylor reaches down towards the passenger headlight, pressing in on the pin for the harness.
2023-03-30 16:12:59 ★ Cletus Taylor seperates the two ends from one another, then grips the headlight and wiggles it ---
2023-03-30 16:13:14 ★ out of position. Once done, he'd place the headlight ontop of the engine.      ((Cletus Taylor))
2023-03-30 16:13:30 ★ Cletus Taylor then reaches over to the drivers headlight, continuing to press in on the release pin ---
2023-03-30 16:13:42 ★ for the headlight's harness, once popped he'd separate the ends.      ((Cletus Taylor))
2023-03-30 16:13:57 ★ Cletus Taylor places the tool back into his pocket, then grips the headlight and wiggles it out of place.
2023-03-30 16:14:09 ★ Cletus Taylor grabs both headlights and heads back to the Ford, placing them into the bed of the truck.
2023-03-30 16:15:35 ★ Cletus Taylor grabs his electric ratchet, continuing to reach down into the engine bay as he'd locate ---
2023-03-30 16:16:39 ★ the bolts securing the front bumper to the vehicle; he'd continue to go about connecting ---      ((Cletus Taylor))
2023-03-30 16:16:55 ★ the metal socket on the electric ratchet to one of the bolts.      ((Cletus Taylor))
2023-03-30 16:17:14 ★ Cletus Taylor presses the trigger in, loosenign the bolt entirely and allows it to fall through the bay --
2023-03-30 16:17:29 ★ and to the floor. He'd move onto the remainder of the bolts, loosening them one-by-one and -      ((Cletus Taylor))
2023-03-30 16:17:43 ★ eventually removes all of them.      ((Cletus Taylor))
2023-03-30 16:17:59 ★ Cletus Taylor places his ratchet into his bag, then stands up and grabs the bumper.
2023-03-30 16:18:14 ★ Cletus Taylor carefully wiggles on the bumper in order to free it from the snap-in points on the ---
2023-03-30 16:18:31 ★ Hellcat's fenders, he'd then firmly grip it and walks it over to the truck placing it down.      ((Cletus Taylor))
2023-03-30 16:18:54 [Southern Accent] Cletus Taylor says: Alright... body is done... get these Hellcat seats then it's on to the engine.
2023-03-30 16:19:38 ★ Cletus Taylor grabs his ratchet from the toolbag, chuckling as he'd already know the current socket --
2023-03-30 16:19:55 ★ is too small. He'd continue to snap the socket off, placing it back into the tray.      ((Cletus Taylor))
2023-03-30 16:20:22 ★ Cletus Taylor grabs a larger socket, then pops it onto the electric ratchet.
2023-03-30 16:20:41 ★ Cletus Taylor leans into the Hellcat, carefully socketing the mouth of his ratchet onto one of the ---
2023-03-30 16:21:01 ★ four bolts securing the drivers seat bracket to the floorpan of the Hellcat.      ((Cletus Taylor))
2023-03-30 16:21:31 ★ Cletus Taylor presses the trigger back, allowing the ratchet to go to town loosening the bolt.
2023-03-30 16:22:08 ★ Cletus Taylor continues on to the remaining three of the large bolts, removing each and continues to ---
2023-03-30 16:22:15 ★ toss the ratchet over to the passenger seat.      ((Cletus Taylor))
2023-03-30 16:22:32 ★ Cletus Taylor grabs the metal pin tool from his pocket, then goes about locating the seat's electrical ---
2023-03-30 16:22:46 ★ harness. He'd press the release pin on the harness in, then tugs the two ends apart.      ((Cletus Taylor))
2023-03-30 16:23:36 ★ Cletus Taylor grabs the Hellcat seat firmly, lifting it up and out of the vehicle.
2023-03-30 16:23:53 ★ Cletus Taylor carries the seat over to the cab of the Ford, then places it down as he'd continue to ---
2023-03-30 16:23:58 ★ open the rear door of the truck.      ((Cletus Taylor))
2023-03-30 16:24:11 ★ Cletus Taylor picks the seat back up and places it into the back seat of the Ford, sliding it over.
2023-03-30 16:24:29 ★ Cletus Taylor walks over to the passenger side of the Hellcat, grabbing his previously placed ratchet.
2023-03-30 16:24:51 ★ Cletus Taylor reaches underneath the seat, then connects the mouth of the socket to one of the ---
2023-03-30 16:25:08 ★ four large bolts. He'd press the trigger back eventually loosenign the large bolt.      ((Cletus Taylor))
2023-03-30 16:25:21 ★ Cletus Taylor moves onto the other three remaining bolts, thus freeign the seat.
2023-03-30 16:25:38 ★ Cletus Taylor places his ratchet into the toolbag, grabing ahold of the pin remover tool from his pocket.
2023-03-30 16:25:53 ★ Cletus Taylor presses the release pin on the seat's harness, then tugs the two ends apart.
2023-03-30 16:26:11 ★ Cletus Taylor pockets the tool, then grabs the seat with both hands; he'd lift it up and pull it out.
2023-03-30 16:26:27 ★ Cletus Taylor carries the seat over to the Ford, then places the seat into the back of the truck's cab.
2023-03-30 16:27:07 ★ The exterior would be basically fully dis-assembled, the interior would be partially gutted.      ((Cletus Taylor))
2023-03-30 16:27:15 [Southern Accent] Cletus Taylor says: Alright... engine bay and I'm done...
2023-03-30 16:27:45 ★ Cletus Taylor grabs the oil drain pan from the back of the ramp, sliding it into position underneath ---
2023-03-30 16:27:52 ★ the Hellcat's engine oil pan.      ((Cletus Taylor))
2023-03-30 16:28:15 ★ Cletus Taylor grabs his adjustable wrench from his pocket, continuing to connect it to the oilpan's ---
2023-03-30 16:28:26 ★ drain plug, then uses his thumb to adjust it to size.      ((Cletus Taylor))
2023-03-30 16:28:51 ★ Cletus Taylor twists the wrench to the left, unthreading the drain plug and allows the oil to begin to ---
2023-03-30 16:28:59 ★ drain out of the engine and into the drain pan.      ((Cletus Taylor))
2023-03-30 16:29:20 ★ Cletus Taylor waits for the oil to drain out, then moves the pan back underneath the transmission.
2023-03-30 16:29:40 ★ Cletus Taylor moves onto the transmission drain plug, connecting the mouth of his wrench to it; then ---
2023-03-30 16:29:48 ★ continues to crank it to the left to remove the bolt.      ((Cletus Taylor))
2023-03-30 16:30:25 ★ Cletus Taylor grabs both bolts, allowing the oil time to drain out; then places both bolts back into ---
2023-03-30 16:30:38 ★ their respective holes; twisting them to the right by hand to tighten them.      ((Cletus Taylor))
2023-03-30 16:31:10 ★ Cletus Taylor slides the drain pan out of the way, then grabs a pair of bolt cutters from the toolbox.
2023-03-30 16:31:26 ★ Cletus Taylor climbs up onto the ramp again, then looks over the engine.
2023-03-30 16:33:36 ★ Cletus Taylor goes over the engine bay, forcefully cutting through many of the rubber hoses with ---
2023-03-30 16:33:59 ★ the large bolt cutters, not caring about the hoses as they're worthless.      ((Cletus Taylor))
2023-03-30 16:34:18 ★ Cletus Taylor continues through the engine bay, cutting through the oil feed lines, fuel hoses, ---
2023-03-30 16:34:31 ★ air conditioner hoses, and any wires that get in his way.      ((Cletus Taylor))
2023-03-30 16:35:10 ★ The only hoses left safe from Cletus would be irrelevant hoses connected to things such as -      ((Cletus Taylor))
2023-03-30 16:35:27 ★ the windshield washer fluid and aux. electrical wires, which were cut at the fuse box.      ((Cletus Taylor))
2023-03-30 16:36:04 ★ Cletus Taylor hops down and heads back to the toolbox, placing the cutters back inside.
2023-03-30 16:37:08 ★ Cletus Taylor grabs another battery from the wall charger, then grabs his Sawz-All from the shelf.
2023-03-30 16:37:25 ★ Cletus Taylor would socket the battery into the Sawz-All, then hops down into the pit underneath ---
2023-03-30 16:37:55 ★ the Hellcat. He'd grab the driveshaft firmly with one hand, then uses the other to ---      ((Cletus Taylor))
2023-03-30 16:38:16 ★ hold up the Sawz-All. He'd guide the sharp "Firefighters" blade towards the front-end of ---      ((Cletus Taylor))
2023-03-30 16:38:30 ★ the Hellcat's driveshaft, then pulls the trigger back as he presses it against it.      ((Cletus Taylor))
2023-03-30 16:38:57 ★ The blade would eat right through the shaft, the other end would drop down and hang freely.      ((Cletus Taylor))
2023-03-30 16:39:21 ★ Cletus Taylor places the Sawz-All on the ground, then grabs the front half of the cut shaft; pulling ---
2023-03-30 16:39:35 ★ it from within the Transmission's output shaft.      ((Cletus Taylor))
2023-03-30 16:39:55 ★ Cletus Taylor tosses the mangled shaft end aside, then grabs the rear half of the driveshaft.
2023-03-30 16:40:17 ★ Cletus Taylor tugs the shaft piece out from the rear-end, then tosses it aside and climbs out.
2023-03-30 16:40:32 [Southern Accent] Cletus Taylor says: Alright... engine and transmission mounts...
2023-03-30 16:41:14 ★ Cletus Taylor grabs a breaker bar from the toolbox, continuing to also grab a larger socket from ---
2023-03-30 16:41:31 ★ his toolkit. He'd connect the socket to the breaker bar, then climbs into the pit under -      ((Cletus Taylor))
2023-03-30 16:41:48 ★ the vehicle. He walks up to the front of the engine bay, examining the mounts.      ((Cletus Taylor))
2023-03-30 16:42:16 ★ Cletus Taylor reaches up to one of the motor mounts, connecting the mouth of the large socket to ---
2023-03-30 16:43:00 ★ the bolt on one end, then grabs and adjusts the wrench to size.      ((Cletus Taylor))
2023-03-30 16:43:38 ★ Cletus Taylor holds the nut in place, then pushes the breaker bar to the left in order to loosen the ---
2023-03-30 16:43:53 ★ mount's bolt, allowign the nut to just drop to the ground afterwards.      ((Cletus Taylor))
2023-03-30 16:44:09 ★ Cletus Taylor goes about loosening the remaining bolts on the engine and transmission mounts; thus ---
2023-03-30 16:44:17 ★ allowing the engine to just loosely sit ontop of the mounts.      ((Cletus Taylor))
2023-03-30 16:44:36 ★ Cletus Taylor climbs up into the Hellcat and disengages the parking brake. He'd then hop down and ---
2023-03-30 16:44:41 ★ walk to the front of the Hellcat.      ((Cletus Taylor))
2023-03-30 16:44:55 ★ Cletus Taylor places both gloves hands on the chassis, pushing it down the ramp and onto the ground.
2023-03-30 16:45:32 ★ Cletus Taylor grabs the engine hoist and rolls it into position infront of the Hellcat.
2023-03-30 16:45:53 ★ Cletus Taylor rolls it into position, carefully eyeing the hoist position over the engine bay. He'd ---
2023-03-30 16:46:05 ★ roll it into position ensuring it covers most of the engine bay.      ((Cletus Taylor))
2023-03-30 16:46:25 ★ Cletus Taylor grabs the chains from the hoist, carefully reachign down into the engine bay in order ---
2023-03-30 16:46:48 ★ to locate the hoist-points on the V8 Engine's block.      ((Cletus Taylor))
2023-03-30 16:47:02 ★ Cletus Taylor secures the chains to these points, then takes a step back and begins to crank the ---
2023-03-30 16:47:17 ★ lever on the hoist up and down, He'd eventually hoist the large supercharged V8 ---      ((Cletus Taylor))
2023-03-30 16:47:26 ★ out of the engine bay, allowing it to dangle from the chains.      ((Cletus Taylor))
2023-03-30 16:47:44 ★ Cletus Taylor rolls the hoist over towards his Ford, guiding the engine over the remaining space ---
2023-03-30 16:47:55 ★ in the back of the Ford's long-bed, then slowly lowers it.      ((Cletus Taylor))
2023-03-30 16:48:09 ★ Cletus Taylor disconnects the chains from the engine, then rolls the hoist out of place.
2023-03-30 16:48:19 ★ Cletus Taylor grips the tailgate of his Ford, lifting it up and slamming it shut.
2023-03-30 16:50:38 [Southern Accent] Cletus Taylor says: Alright... parts are removed... cover my tracks...
2023-03-30 16:50:58 ★ Cletus Taylor looks down at the windshield of the Dodge, reading the VIN through the glass.
2023-03-30 16:51:10 ★ Cletus Taylor heads over to the toolbox, taking hold of a tire iron.
2023-03-30 16:51:48 ★ Cletus Taylor grabs the tire iron firmly, then walks to the Hellcat.
2023-03-30 16:52:03 ★ Cletus Taylor jams the sharp end of the tire iron into the lower corner of the windshield.
2023-03-30 16:52:05 ((OOC Luck)) Cletus Taylor tries his luck from 1 to 100 and gets 82.
2023-03-30 16:52:08 ((OOC Chance at 82%)) Cletus Taylor's attempt has succeeded.
2023-03-30 16:52:16 ★ The windshield would shatter, glass would splinter around.      ((Cletus Taylor))
2023-03-30 16:52:42 ★ Cletus Taylor goes about prying at the windshield with the end of the iron, exposing the VIN plate- --
2023-03-30 16:52:59 ★ on the dashboard. He'd then toss the tire iron aside and head over to the toolox.      ((Cletus Taylor))
2023-03-30 16:53:20 ★ Cletus Taylor grabs the electric grinder, then heads over to the Hellcat.
2023-03-30 16:53:36 ★ Cletus Taylor angles the grinder's blade against the VIN plate, pulling the trigger back in order to ---
2023-03-30 16:53:55 ★ grind away at the VIN, he'd move the grinder side to side and forward and backwards ---      ((Cletus Taylor))
2023-03-30 16:54:10 ★ ensuring the entire VIN plate is scratched away.      ((Cletus Taylor))
2023-03-30 16:54:48 ★ Cletus Taylor walks over to the driver's side door frame, locating the VIN sticker and the engraved ---
2023-03-30 16:55:18 ★ VIN on the chassis of the vehicle, quickly grinding away at them with the angle grinder.      ((Cletus Taylor))
2023-03-30 16:56:39 ★ Cletus Taylor places the angle grinder back into the toolbox, then heads over to the Hellcat.
2023-03-30 16:57:37 [Southern Accent] Cletus Taylor says: Alright... got everything I want.