SHARE
TWEET

goshanecr

a guest Apr 7th, 2009 121 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
  2. [    0.000000] Linux version 2.6.28-gentoo (root@Pantera-SMS-ka) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #5 SMP PREEMPT Fri Apr 3 11:19:50 Local time zone must be set--s
  3. [    0.000000] KERNEL supported cpus:
  4. [    0.000000]   Intel GenuineIntel
  5. [    0.000000]   AMD AuthenticAMD
  6. [    0.000000]   NSC Geode by NSC
  7. [    0.000000]   Cyrix CyrixInstead
  8. [    0.000000]   Centaur CentaurHauls
  9. [    0.000000]   Transmeta GenuineTMx86
  10. [    0.000000]   Transmeta TransmetaCPU
  11. [    0.000000]   UMC UMC UMC UMC
  12. [    0.000000] BIOS-provided physical RAM map:
  13. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  14. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  15. [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  16. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
  17. [    0.000000]  BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
  18. [    0.000000]  BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
  19. [    0.000000]  BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
  20. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  21. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
  22. [    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
  23. [    0.000000] DMI present.
  24. [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
  25. [    0.000000] last_pfn = 0x7ffc0 max_arch_pfn = 0x1000000
  26. [    0.000000] Warning only 895MB will be used.
  27. [    0.000000] Use a HIGHMEM enabled kernel.
  28. [    0.000000] kernel direct mapping tables up to 37f9d000 @ 10000-16000
  29. [    0.000000] NX (Execute Disable) protection: active
  30. [    0.000000] ACPI: RSDP 000FB810, 0024 (r2 ACPIAM)
  31. [    0.000000] ACPI: XSDT 7FFC0100, 004C (r1 A_M_I_ OEMXSDT   9000713 MSFT       97)
  32. [    0.000000] ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP   9000713 MSFT       97)
  33. [    0.000000] ACPI: DSDT 7FFC0440, 5288 (r1  A0626 A0626000        0 INTL  2002026)
  34. [    0.000000] ACPI: FACS 7FFCE000, 0040
  35. [    0.000000] ACPI: APIC 7FFC0390, 0070 (r1 A_M_I_ OEMAPIC   9000713 MSFT       97)
  36. [    0.000000] ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG   9000713 MSFT       97)
  37. [    0.000000] ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM   9000713 MSFT       97)
  38. [    0.000000] ACPI: SSDT 7FFC56D0, 0248 (r1 A_M_I_ POWERNOW        1 AMD         1)
  39. [    0.000000] ACPI: Local APIC address 0xfee00000
  40. [    0.000000] 895MB LOWMEM available.
  41. [    0.000000]   mapped low ram: 0 - 37f9d000
  42. [    0.000000]   low ram: 00000000 - 37f9d000
  43. [    0.000000]   bootmap 00013000 - 00019ff4
  44. [    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0037f9d000]
  45. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  46. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  47. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  48. [    0.000000]   #3 [0000200000 - 00007b06dc]    TEXT DATA BSS ==> [0000200000 - 00007b06dc]
  49. [    0.000000]   #4 [00007b1000 - 00007b9000]    INIT_PG_TABLE ==> [00007b1000 - 00007b9000]
  50. [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  51. [    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
  52. [    0.000000]   #7 [0000013000 - 000001a000]          BOOTMAP ==> [0000013000 - 000001a000]
  53. [    0.000000] Zone PFN ranges:
  54. [    0.000000]   DMA      0x00000010 -> 0x00001000
  55. [    0.000000]   Normal   0x00001000 -> 0x00037f9d
  56. [    0.000000] Movable zone start PFN for each node
  57. [    0.000000] early_node_map[2] active PFN ranges
  58. [    0.000000]     0: 0x00000010 -> 0x0000009f
  59. [    0.000000]     0: 0x00000100 -> 0x00037f9d
  60. [    0.000000] On node 0 totalpages: 229164
  61. [    0.000000] free_area_init_node: node 0, pgdat c06e4900, node_mem_map c1000200
  62. [    0.000000]   DMA zone: 32 pages used for memmap
  63. [    0.000000]   DMA zone: 0 pages reserved
  64. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  65. [    0.000000]   Normal zone: 1760 pages used for memmap
  66. [    0.000000]   Normal zone: 223421 pages, LIFO batch:31
  67. [    0.000000]   Movable zone: 0 pages used for memmap
  68. [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
  69. [    0.000000] If you got timer trouble try acpi_use_timer_override
  70. [    0.000000] Detected use of extended apic ids on hypertransport bus
  71. [    0.000000] ACPI: PM-Timer IO Port: 0x508
  72. [    0.000000] ACPI: Local APIC address 0xfee00000
  73. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  74. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  75. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  76. [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  77. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
  78. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  79. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  80. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  81. [    0.000000] ACPI: IRQ0 used by override.
  82. [    0.000000] ACPI: IRQ9 used by override.
  83. [    0.000000] ACPI: IRQ14 used by override.
  84. [    0.000000] ACPI: IRQ15 used by override.
  85. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  86. [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  87. [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
  88. [    0.000000] PERCPU: Allocating 32768 bytes of per cpu data
  89. [    0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
  90. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227372
  91. [    0.000000] Kernel command line: root=/dev/sda5 video=uvesafb:1400x1050-32@60,mtrr:3,ywrap
  92. [    0.000000] Enabling fast FPU save and restore... done.
  93. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  94. [    0.000000] Initializing CPU#0
  95. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  96. [    0.000000] Extended CMOS year: 2000
  97. [    0.000000] Fast TSC calibration using PIT
  98. [    0.000000] Detected 2410.729 MHz processor.
  99. [    0.000999] spurious 8259A interrupt: IRQ7.
  100. [    0.000999] Console: colour VGA+ 80x25
  101. [    0.000999] console [tty0] enabled
  102. [    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  103. [    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  104. [    0.000999] Memory: 902476k/917108k available (3795k kernel code, 13976k reserved, 1314k data, 332k init, 0k highmem)
  105. [    0.000999] virtual kernel memory layout:
  106. [    0.000999]     fixmap  : 0xfff9f000 - 0xfffff000   ( 384 kB)
  107. [    0.000999]     vmalloc : 0xf879d000 - 0xfff9d000   ( 120 MB)
  108. [    0.000999]     lowmem  : 0xc0000000 - 0xf7f9d000   ( 895 MB)
  109. [    0.000999]       .init : 0xc0704000 - 0xc0757000   ( 332 kB)
  110. [    0.000999]       .data : 0xc05b4f5b - 0xc06fda8c   (1314 kB)
  111. [    0.000999]       .text : 0xc0200000 - 0xc05b4f5b   (3795 kB)
  112. [    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  113. [    0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  114. [    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.45 BogoMIPS (lpj=2410729)
  115. [    0.000999] Security Framework initialized
  116. [    0.000999] Mount-cache hash table entries: 512
  117. [    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  118. [    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  119. [    0.000999] CPU: Physical Processor ID: 0
  120. [    0.000999] CPU: Processor Core ID: 0
  121. [    0.000999] Intel machine check architecture supported.
  122. [    0.000999] Intel machine check reporting enabled on CPU#0.
  123. [    0.000999] using C1E aware idle routine
  124. [    0.000999] Checking 'hlt' instruction... OK.
  125. [    0.004352] ACPI: Core revision 20080926
  126. [    0.011861] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  127. [    0.021923] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 03
  128. [    0.022996] Booting processor 1 APIC 0x1 ip 0x6000
  129. [    0.000999] Initializing CPU#1
  130. [    0.000999] Calibrating delay using timer specific routine.. 4820.82 BogoMIPS (lpj=2410412)
  131. [    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  132. [    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  133. [    0.000999] CPU: Physical Processor ID: 0
  134. [    0.000999] CPU: Processor Core ID: 1
  135. [    0.000999] Intel machine check architecture supported.
  136. [    0.000999] Intel machine check reporting enabled on CPU#1.
  137. [    0.093093] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 03
  138. [    0.093588] Brought up 2 CPUs
  139. [    0.093635] Total of 2 processors activated (9642.28 BogoMIPS).
  140. [    0.093773] net_namespace: 488 bytes
  141. [    0.094094] NET: Registered protocol family 16
  142. [    0.094094] ACPI: bus type pci registered
  143. [    0.094094] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  144. [    0.094094] PCI: Not using MMCONFIG.
  145. [    0.095326] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
  146. [    0.095373] PCI: Using configuration type 1 for base access
  147. [    0.098570] ACPI: EC: Look up EC in DSDT
  148. [    0.107344] ACPI: Interpreter enabled
  149. [    0.107392] ACPI: (supports S0 S5)
  150. [    0.107484] ACPI: Using IOAPIC for interrupt routing
  151. [    0.107574] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  152. [    0.113087] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
  153. [    0.113136] PCI: Using MMCONFIG for extended config space
  154. [    0.122141] ACPI: No dock devices found.
  155. [    0.122186] ACPI: PCI Root Bridge [PCI0] (0000:00)
  156. [    0.123107] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
  157. [    0.123139] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
  158. [    0.123148] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
  159. [    0.123151] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
  160. [    0.123160] pci 0000:00:01.1: PME# supported from D3hot D3cold
  161. [    0.123211] pci 0000:00:01.1: PME# disabled
  162. [    0.123296] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfdff000-0xdfdfffff]
  163. [    0.123311] pci 0000:00:02.0: supports D1 D2
  164. [    0.123313] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  165. [    0.123361] pci 0000:00:02.0: PME# disabled
  166. [    0.123425] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfdfec00-0xdfdfecff]
  167. [    0.123442] pci 0000:00:02.1: supports D1 D2
  168. [    0.123443] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  169. [    0.123492] pci 0000:00:02.1: PME# disabled
  170. [    0.123583] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfdf8000-0xdfdfbfff]
  171. [    0.123599] pci 0000:00:05.0: PME# supported from D3hot D3cold
  172. [    0.123647] pci 0000:00:05.0: PME# disabled
  173. [    0.123720] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
  174. [    0.123747] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfdfd000-0xdfdfdfff]
  175. [    0.123750] pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
  176. [    0.123761] pci 0000:00:07.0: supports D1 D2
  177. [    0.123763] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
  178. [    0.123812] pci 0000:00:07.0: PME# disabled
  179. [    0.123875] pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
  180. [    0.123877] pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
  181. [    0.123880] pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
  182. [    0.123883] pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
  183. [    0.123886] pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
  184. [    0.123889] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfdfc000-0xdfdfcfff]
  185. [    0.123909] pci 0000:00:08.1: reg 10 io port: [0xc800-0xc807]
  186. [    0.123912] pci 0000:00:08.1: reg 14 io port: [0xc480-0xc483]
  187. [    0.123915] pci 0000:00:08.1: reg 18 io port: [0xc400-0xc407]
  188. [    0.123918] pci 0000:00:08.1: reg 1c io port: [0xc080-0xc083]
  189. [    0.123921] pci 0000:00:08.1: reg 20 io port: [0xc000-0xc00f]
  190. [    0.123924] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfdf3000-0xdfdf3fff]
  191. [    0.123951] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
  192. [    0.123982] pci 0000:00:09.0: PME# disabled
  193. [    0.124046] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
  194. [    0.124094] pci 0000:00:0b.0: PME# disabled
  195. [    0.124159] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  196. [    0.124207] pci 0000:00:0c.0: PME# disabled
  197. [    0.124336] pci 0000:01:09.0: reg 10 32bit mmio: [0xdfef8000-0xdfefffff]
  198. [    0.124381] pci 0000:00:04.0: transparent bridge
  199. [    0.124430] pci 0000:00:04.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
  200. [    0.124451] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
  201. [    0.124457] pci 0000:02:00.0: reg 18 64bit mmio: [0xdfff0000-0xdfffffff]
  202. [    0.124461] pci 0000:02:00.0: reg 20 io port: [0xe800-0xe8ff]
  203. [    0.124467] pci 0000:02:00.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
  204. [    0.124472] pci 0000:02:00.0: supports D1 D2
  205. [    0.124495] pci 0000:02:00.1: reg 10 64bit mmio: [0xdffec000-0xdffeffff]
  206. [    0.124511] pci 0000:02:00.1: supports D1 D2
  207. [    0.124609] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
  208. [    0.124611] pci 0000:00:09.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
  209. [    0.124614] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
  210. [    0.124679] bus 00 -> node 0
  211. [    0.124684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  212. [    0.124905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  213. [    0.125092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  214. [    0.125196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
  215. [    0.125300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
  216. [    0.132256] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
  217. [    0.133104] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
  218. [    0.133517] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
  219. [    0.133947] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
  220. [    0.134365] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
  221. [    0.134773] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
  222. [    0.135197] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
  223. [    0.135626] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
  224. [    0.136063] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
  225. [    0.136472] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
  226. [    0.136880] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
  227. [    0.137282] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
  228. [    0.137691] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
  229. [    0.138135] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
  230. [    0.138566] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
  231. [    0.138974] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
  232. [    0.139386] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
  233. [    0.140196] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
  234. [    0.140646] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
  235. [    0.141151] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 32, should be 25 [20080926]
  236. [    0.141160] SCSI subsystem initialized
  237. [    0.141160] libata version 3.00 loaded.
  238. [    0.141160] usbcore: registered new interface driver usbfs
  239. [    0.141160] usbcore: registered new interface driver hub
  240. [    0.141160] usbcore: registered new device driver usb
  241. [    0.142010] PCI: Using ACPI for IRQ routing
  242. [    0.144000] cfg80211: Using static regulatory domain info
  243. [    0.144038] cfg80211: Regulatory domain: US
  244. [    0.144085]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  245. [    0.144156]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  246. [    0.144204]  (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  247. [    0.144252]  (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  248. [    0.144300]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  249. [    0.144348]  (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  250. [    0.144396]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  251. [    0.144444] cfg80211: Calling CRDA for country: US
  252. [    0.147982] pnp: PnP ACPI init
  253. [    0.148033] ACPI: bus type pnp registered
  254. [    0.151546] pnp 00:07: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
  255. [    0.151620] pnp 00:07: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
  256. [    0.155184] pnp: PnP ACPI: found 15 devices
  257. [    0.155231] ACPI: ACPI bus type pnp unregistered
  258. [    0.155286] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
  259. [    0.155335] system 00:07: ioport range 0x800-0x80f has been reserved
  260. [    0.155383] system 00:07: ioport range 0x500-0x57f has been reserved
  261. [    0.155431] system 00:07: ioport range 0x580-0x5ff has been reserved
  262. [    0.155479] system 00:07: ioport range 0x800-0x87f could not be reserved
  263. [    0.155527] system 00:07: ioport range 0x880-0x8ff has been reserved
  264. [    0.155575] system 00:07: ioport range 0xd00-0xd7f has been reserved
  265. [    0.155623] system 00:07: ioport range 0xd80-0xdff has been reserved
  266. [    0.155671] system 00:07: ioport range 0x2000-0x207f has been reserved
  267. [    0.155719] system 00:07: ioport range 0x2080-0x20ff has been reserved
  268. [    0.155768] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
  269. [    0.155816] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
  270. [    0.155865] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
  271. [    0.155913] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
  272. [    0.155962] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved
  273. [    0.155980] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
  274. [    0.156028] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
  275. [    0.156079] system 00:0b: ioport range 0x230-0x23f has been reserved
  276. [    0.156127] system 00:0b: ioport range 0x290-0x29f has been reserved
  277. [    0.156175] system 00:0b: ioport range 0xa00-0xa0f has been reserved
  278. [    0.156223] system 00:0b: ioport range 0xa10-0xa1f has been reserved
  279. [    0.156275] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
  280. [    0.156326] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
  281. [    0.156374] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
  282. [    0.156423] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
  283. [    0.156471] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
  284. [    0.156543] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
  285. [    0.191307] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
  286. [    0.191355] pci 0000:00:04.0:   IO window: disabled
  287. [    0.191404] pci 0000:00:04.0:   MEM window: 0xdfe00000-0xdfefffff
  288. [    0.191452] pci 0000:00:04.0:   PREFETCH window: disabled
  289. [    0.191501] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
  290. [    0.191549] pci 0000:00:09.0:   IO window: 0xe000-0xefff
  291. [    0.191597] pci 0000:00:09.0:   MEM window: 0xdff00000-0xdfffffff
  292. [    0.191645] pci 0000:00:09.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
  293. [    0.191717] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
  294. [    0.191765] pci 0000:00:0b.0:   IO window: disabled
  295. [    0.191812] pci 0000:00:0b.0:   MEM window: disabled
  296. [    0.191859] pci 0000:00:0b.0:   PREFETCH window: disabled
  297. [    0.191908] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
  298. [    0.191955] pci 0000:00:0c.0:   IO window: disabled
  299. [    0.191985] Switched to high resolution mode on CPU 0
  300. [    0.191988] pci 0000:00:0c.0:   MEM window: disabled
  301. [    0.192043] pci 0000:00:0c.0:   PREFETCH window: disabled
  302. [    0.192095] pci 0000:00:04.0: setting latency timer to 64
  303. [    0.192099] pci 0000:00:09.0: setting latency timer to 64
  304. [    0.192103] pci 0000:00:0b.0: setting latency timer to 64
  305. [    0.192106] pci 0000:00:0c.0: setting latency timer to 64
  306. [    0.192109] bus: 00 index 0 io port: [0x00-0xffff]
  307. [    0.192156] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
  308. [    0.192204] bus: 01 index 0 mmio: [0x0-0x0]
  309. [    0.192250] bus: 01 index 1 mmio: [0xdfe00000-0xdfefffff]
  310. [    0.192297] bus: 01 index 2 mmio: [0x0-0x0]
  311. [    0.192344] bus: 01 index 3 io port: [0x00-0xffff]
  312. [    0.192391] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
  313. [    0.192439] bus: 02 index 0 io port: [0xe000-0xefff]
  314. [    0.192486] bus: 02 index 1 mmio: [0xdff00000-0xdfffffff]
  315. [    0.192533] bus: 02 index 2 mmio: [0xc0000000-0xcfffffff]
  316. [    0.192554] Switched to high resolution mode on CPU 1
  317. [    0.192591] bus: 02 index 3 mmio: [0x0-0x0]
  318. [    0.192638] bus: 03 index 0 mmio: [0x0-0x0]
  319. [    0.192684] bus: 03 index 1 mmio: [0x0-0x0]
  320. [    0.192731] bus: 03 index 2 mmio: [0x0-0x0]
  321. [    0.192777] bus: 03 index 3 mmio: [0x0-0x0]
  322. [    0.192824] bus: 04 index 0 mmio: [0x0-0x0]
  323. [    0.192870] bus: 04 index 1 mmio: [0x0-0x0]
  324. [    0.192917] bus: 04 index 2 mmio: [0x0-0x0]
  325. [    0.192963] bus: 04 index 3 mmio: [0x0-0x0]
  326. [    0.193028] NET: Registered protocol family 2
  327. [    0.196050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  328. [    0.196323] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  329. [    0.196966] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  330. [    0.197343] TCP: Hash tables configured (established 131072 bind 65536)
  331. [    0.197392] TCP reno registered
  332. [    0.199072] NET: Registered protocol family 1
  333. [    0.200127] microcode: CPU0 not a capable AMD processor
  334. [    0.200201] microcode: CPU1 not a capable AMD processor
  335. [    0.200274] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  336. [    0.200416] alg: cipher: Test 1 failed on encryption for aes-asm
  337. [    0.200465] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
  338. [    0.200807] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  339. [    0.202734] VFS: Disk quotas dquot_6.5.1
  340. [    0.202807] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  341. [    0.203518] msgmni has been set to 1763
  342. [    0.203983] alg: No test for stdrng (krng)
  343. [    0.204133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  344. [    0.204207] io scheduler noop registered
  345. [    0.204269] io scheduler cfq registered (default)
  346. [    0.204342] pci 0000:00:00.0: Enabling HT MSI Mapping
  347. [    0.728684] pci 0000:00:04.0: Enabling HT MSI Mapping
  348. [    0.728743] pci 0000:00:05.0: Enabling HT MSI Mapping
  349. [    0.728812] pci 0000:00:07.0: Enabling HT MSI Mapping
  350. [    0.728870] pci 0000:00:08.0: Enabling HT MSI Mapping
  351. [    0.728928] pci 0000:00:08.1: Enabling HT MSI Mapping
  352. [    0.728986] pci 0000:00:09.0: Enabling HT MSI Mapping
  353. [    0.729055] pci 0000:00:0b.0: Enabling HT MSI Mapping
  354. [    0.729113] pci 0000:00:0c.0: Enabling HT MSI Mapping
  355. [    0.729167] pci 0000:02:00.0: Boot video device
  356. [    0.734676] pcieport-driver 0000:00:09.0: setting latency timer to 64
  357. [    0.734694] pcieport-driver 0000:00:09.0: found MSI capability
  358. [    0.734754] pcieport-driver 0000:00:09.0: irq 319 for MSI/MSI-X
  359. [    0.734759] pci_express 0000:00:09.0:pcie00: allocate port service
  360. [    0.734790] pci_express 0000:00:09.0:pcie03: allocate port service
  361. [    0.734840] pcieport-driver 0000:00:0b.0: setting latency timer to 64
  362. [    0.734857] pcieport-driver 0000:00:0b.0: found MSI capability
  363. [    0.734912] pcieport-driver 0000:00:0b.0: irq 318 for MSI/MSI-X
  364. [    0.734916] pci_express 0000:00:0b.0:pcie00: allocate port service
  365. [    0.734946] pci_express 0000:00:0b.0:pcie03: allocate port service
  366. [    0.734996] pcieport-driver 0000:00:0c.0: setting latency timer to 64
  367. [    0.735023] pcieport-driver 0000:00:0c.0: found MSI capability
  368. [    0.735078] pcieport-driver 0000:00:0c.0: irq 317 for MSI/MSI-X
  369. [    0.735083] pci_express 0000:00:0c.0:pcie00: allocate port service
  370. [    0.735113] pci_express 0000:00:0c.0:pcie03: allocate port service
  371. [    0.737222] hpet_acpi_add: no address or irqs in _CRS
  372. [    0.737381] Non-volatile memory driver v1.2
  373. [    0.737434] Linux agpgart interface v0.103
  374. [    0.737590] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
  375. [    0.737662] Hangcheck: Using get_cycles().
  376. [    0.737920] uvesafb: failed to execute /sbin/v86d
  377. [    0.737976] uvesafb: make sure that the v86d helper is installed and executable
  378. [    0.738059] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
  379. [    0.738106] uvesafb: vbe_init() failed with -22
  380. [    0.738154] uvesafb: probe of uvesafb.0 failed with error -22
  381. [    0.738339] input: Power Button (FF) as /class/input/input0
  382. [    0.739264] ACPI: Power Button (FF) [PWRF]
  383. [    0.739389] input: Power Button (CM) as /class/input/input1
  384. [    0.740271] ACPI: Power Button (CM) [PWRB]
  385. [    0.740752] processor ACPI_CPU:00: registered as cooling_device0
  386. [    0.741042] processor ACPI_CPU:01: registered as cooling_device1
  387. [    0.744833] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
  388. [    0.989114] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  389. [    0.989611] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  390. [    0.990991] brd: module loaded
  391. [    0.991629] loop: module loaded
  392. [    0.991765] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
  393. [    0.992152] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
  394. [    0.992207] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
  395. [    0.992290] forcedeth 0000:00:07.0: setting latency timer to 64
  396. [    1.504454] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1e:8c:1b:07:af
  397. [    1.504527] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
  398. [    1.504631] Uniform Multi-Platform E-IDE driver
  399. [    1.504755] amd74xx 0000:00:06.0: UDMA133 controller
  400. [    1.504802] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
  401. [    1.504857] amd74xx 0000:00:06.0: IDE port disabled
  402. [    1.504907] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
  403. [    1.504980] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
  404. [    1.505042]     ide0: BM-DMA at 0xffa0-0xffa7
  405. [    1.505092] Probing IDE interface ide0...
  406. [    2.432110] hdb: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive
  407. [    2.483092] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
  408. [    2.483329] hdb: UDMA/66 mode selected
  409. [    2.483589] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  410. [    2.485737] ide-gd driver 1.18
  411. [    2.485839] ide-cd driver 5.00
  412. [    2.487748] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
  413. [    2.487945] Uniform CD-ROM driver Revision: 3.20
  414. [    2.490801] Driver 'sd' needs updating - please use bus_type methods
  415. [    2.490942] sata_nv 0000:00:08.0: version 3.5
  416. [    2.491243] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
  417. [    2.491306] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
  418. [    2.492046] sata_nv 0000:00:08.0: setting latency timer to 64
  419. [    2.492095] scsi0 : sata_nv
  420. [    2.492238] scsi1 : sata_nv
  421. [    2.492432] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 22
  422. [    2.492481] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 22
  423. [    2.946038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  424. [    2.965227] ata1.00: ATA-8: SAMSUNG HD403LJ, CT100-12, max UDMA7
  425. [    2.965289] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
  426. [    2.968227] ata1.00: configured for UDMA/133
  427. [    3.433036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  428. [    3.436469] ata2.00: HPA detected: current 976771055, native 976773168
  429. [    3.436518] ata2.00: ATA-8: ST3500320AS, SD15, max UDMA/133
  430. [    3.436565] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
  431. [    3.442470] ata2.00: configured for UDMA/133
  432. [    3.453080] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD403LJ  CT10 PQ: 0 ANSI: 5
  433. [    3.453304] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
  434. [    3.453384] sd 0:0:0:0: [sda] Write Protect is off
  435. [    3.453431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  436. [    3.453445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  437. [    3.453560] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
  438. [    3.453637] sd 0:0:0:0: [sda] Write Protect is off
  439. [    3.453685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  440. [    3.453696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  441. [    3.453769]  sda: sda1 sda2 < sda5 sda6 > sda3
  442. [    3.502796] sd 0:0:0:0: [sda] Attached SCSI disk
  443. [    3.503000] scsi 1:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
  444. [    3.503207] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors: (500 GB/465 GiB)
  445. [    3.503297] sd 1:0:0:0: [sdb] Write Protect is off
  446. [    3.503344] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  447. [    3.503355] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  448. [    3.503454] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors: (500 GB/465 GiB)
  449. [    3.503531] sd 1:0:0:0: [sdb] Write Protect is off
  450. [    3.503578] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  451. [    3.503589] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  452. [    3.503661]  sdb: sdb1
  453. [    3.507457] sd 1:0:0:0: [sdb] Attached SCSI disk
  454. [    3.507873] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
  455. [    3.507928] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 21 (level, low) -> IRQ 21
  456. [    3.508035] sata_nv 0000:00:08.1: setting latency timer to 64
  457. [    3.508079] scsi2 : sata_nv
  458. [    3.508194] scsi3 : sata_nv
  459. [    3.508403] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 21
  460. [    3.508452] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 21
  461. [    4.114188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  462. [    4.114547] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
  463. [    4.114599] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
  464. [    4.114676] ehci_hcd 0000:00:02.1: setting latency timer to 64
  465. [    4.114679] ehci_hcd 0000:00:02.1: EHCI Host Controller
  466. [    4.114785] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  467. [    4.114880] ehci_hcd 0000:00:02.1: debug port 1
  468. [    4.114928] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
  469. [    4.114941] ehci_hcd 0000:00:02.1: irq 20, io mem 0xdfdfec00
  470. [    4.120020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
  471. [    4.120176] usb usb1: configuration #1 chosen from 1 choice
  472. [    4.120285] hub 1-0:1.0: USB hub found
  473. [    4.120338] hub 1-0:1.0: 10 ports detected
  474. [    4.120539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  475. [    4.120592] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  476. [    4.120663] usb usb1: Product: EHCI Host Controller
  477. [    4.120710] usb usb1: Manufacturer: Linux 2.6.28-gentoo ehci_hcd
  478. [    4.120757] usb usb1: SerialNumber: 0000:00:02.1
  479. [    4.120845] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  480. [    4.121150] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
  481. [    4.121198] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
  482. [    4.121288] ohci_hcd 0000:00:02.0: setting latency timer to 64
  483. [    4.121290] ohci_hcd 0000:00:02.0: OHCI Host Controller
  484. [    4.121379] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  485. [    4.121479] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfdff000
  486. [    4.174099] usb usb2: configuration #1 chosen from 1 choice
  487. [    4.174198] hub 2-0:1.0: USB hub found
  488. [    4.174261] hub 2-0:1.0: 10 ports detected
  489. [    4.174427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  490. [    4.174475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [    4.174547] usb usb2: Product: OHCI Host Controller
  492. [    4.174593] usb usb2: Manufacturer: Linux 2.6.28-gentoo ohci_hcd
  493. [    4.174640] usb usb2: SerialNumber: 0000:00:02.0
  494. [    4.174736] uhci_hcd: USB Universal Host Controller Interface driver
  495. [    4.174847] Initializing USB Mass Storage driver...
  496. [    4.174944] usbcore: registered new interface driver usb-storage
  497. [    4.174995] USB Mass Storage support registered.
  498. [    4.175097] usbcore: registered new interface driver libusual
  499. [    4.175239] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  500. [    4.175298] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  501. [    4.175510] serio: i8042 KBD port at 0x60,0x64 irq 1
  502. [    4.175610] mice: PS/2 mouse device common for all mice
  503. [    4.177486] rtc_cmos 00:02: RTC can wake from S4
  504. [    4.177599] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  505. [    4.177678] rtc0: alarms up to one year, y3k, 114 bytes nvram
  506. [    4.177840] device-mapper: uevent: version 1.0.3
  507. [    4.178040] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
  508. [    4.178951] usbcore: registered new interface driver hiddev
  509. [    4.179055] usbcore: registered new interface driver usbhid
  510. [    4.179107] usbhid: v2.6:USB HID core driver
  511. [    4.179340] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
  512. [    4.179440] can't register device seq
  513. [    4.179828] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
  514. [    4.179877] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
  515. [    4.179972] HDA Intel 0000:00:05.0: setting latency timer to 64
  516. [    4.196405] input: AT Translated Set 2 keyboard as /class/input/input2
  517. [    4.632035] usb 2-4: new low speed USB device using ohci_hcd and address 2
  518. [    4.824115] usb 2-4: configuration #1 chosen from 1 choice
  519. [    4.834290] input: Genius       Optical Mouse as /class/input/input3
  520. [    4.836382] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:00:02.0-4/input0
  521. [    4.836579] usb 2-4: New USB device found, idVendor=0458, idProduct=003a
  522. [    4.836638] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  523. [    4.836686] usb 2-4: Product: Optical Mouse
  524. [    4.836732] usb 2-4: Manufacturer: Genius      
  525. [    5.059193] ------------[ cut here ]------------
  526. [    5.059240] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x4a/0x50()
  527. [    5.059296] sysfs: duplicate filename 'audio' can not be created
  528. [    5.059343] Modules linked in:
  529. [    5.059411] Pid: 1, comm: swapper Not tainted 2.6.28-gentoo #5
  530. [    5.059459] Call Trace:
  531. [    5.059509]  [<c022decf>] warn_slowpath+0x6f/0x90
  532. [    5.059558]  [<c0225bbf>] finish_task_switch+0x1f/0xb0
  533. [    5.059607]  [<c05b1c50>] schedule+0x260/0x6e0
  534. [    5.059657]  [<c02158e7>] xapic_wait_icr_idle+0x17/0x20
  535. [    5.059705]  [<c036dd5a>] idr_get_empty_slot+0xea/0x270
  536. [    5.059752]  [<c036df60>] ida_get_new_above+0x80/0x1c0
  537. [    5.059800]  [<c02d75c0>] sysfs_ilookup_test+0x0/0x10
  538. [    5.059848]  [<c02d78c1>] sysfs_find_dirent+0x21/0x30
  539. [    5.059895]  [<c02d7970>] __sysfs_add_one+0x10/0x90
  540. [    5.059943]  [<c02d7a3a>] sysfs_add_one+0x4a/0x50
  541. [    5.059990]  [<c02d8528>] create_dir+0x48/0xa0
  542. [    5.060050]  [<c02d85a9>] sysfs_create_dir+0x29/0x50
  543. [    5.060097]  [<c036eaff>] kobject_get+0xf/0x20
  544. [    5.060144]  [<c036ec4d>] kobject_add_internal+0xcd/0x1c0
  545. [    5.060192]  [<c036edca>] kobject_set_name_vargs+0x3a/0x50
  546. [    5.060240]  [<c036ee9d>] kobject_add+0x2d/0x60
  547. [    5.060298]  [<c036eaff>] kobject_get+0xf/0x20
  548. [    5.060347]  [<c03ef94a>] device_add+0xda/0x620
  549. [    5.060394]  [<c036e8ea>] kobject_init+0x2a/0xa0
  550. [    5.060442]  [<c03eff53>] device_create_vargs+0xb3/0xd0
  551. [    5.060489]  [<c03eff9b>] device_create+0x2b/0x30
  552. [    5.060537]  [<c04acf17>] sound_insert_unit+0x117/0x1e0
  553. [    5.060585]  [<c04ad130>] register_sound_special_device+0x90/0x1b0
  554. [    5.060634]  [<c0373aa0>] vsnprintf+0x3c0/0x7e0
  555. [    5.060682]  [<c04bd079>] snd_register_oss_device+0x1d9/0x250
  556. [    5.060731]  [<c04cea2f>] register_oss_dsp+0x5f/0xa0
  557. [    5.060779]  [<c023e75f>] call_usermodehelper_exec+0x6f/0x90
  558. [    5.060827]  [<c036f4e8>] kobject_uevent_env+0xf8/0x3a0
  559. [    5.060875]  [<c036dd5a>] idr_get_empty_slot+0xea/0x270
  560. [    5.060922]  [<c036df60>] ida_get_new_above+0x80/0x1c0
  561. [    5.060970]  [<c04ceae9>] snd_pcm_oss_register_minor+0x79/0xf0
  562. [    5.061028]  [<c02d75c0>] sysfs_ilookup_test+0x0/0x10
  563. [    5.061075]  [<c04bc844>] snd_device_new+0x24/0x80
  564. [    5.061123]  [<c04bec48>] snd_timer_dev_register+0xe8/0x120
  565. [    5.061171]  [<c04bc5b7>] snd_device_register+0x57/0x70
  566. [    5.061218]  [<c04ca800>] snd_pcm_timer_init+0x130/0x180
  567. [    5.061277]  [<c04c1e9c>] snd_pcm_dev_register+0x17c/0x250
  568. [    5.061325]  [<c04bc5fd>] snd_device_register_all+0x2d/0x50
  569. [    5.061374]  [<c04b856a>] snd_card_register+0x1a/0x2d0
  570. [    5.061423]  [<c05a8426>] azx_probe+0x706/0xb90
  571. [    5.061473]  [<c04e3170>] azx_get_response+0x0/0x1f0
  572. [    5.061522]  [<c03814c6>] pci_device_probe+0x56/0x80
  573. [    5.061571]  [<c03f1cd6>] driver_probe_device+0x86/0x1a0
  574. [    5.061619]  [<c03813b0>] pci_match_device+0xa0/0xc0
  575. [    5.061666]  [<c03f1e79>] __driver_attach+0x89/0x90
  576. [    5.061715]  [<c0381410>] pci_device_remove+0x0/0x40
  577. [    5.061762]  [<c03f1604>] bus_for_each_dev+0x44/0x70
  578. [    5.061810]  [<c0381410>] pci_device_remove+0x0/0x40
  579. [    5.061858]  [<c03f1b66>] driver_attach+0x16/0x20
  580. [    5.061906]  [<c03f1df0>] __driver_attach+0x0/0x90
  581. [    5.061953]  [<c03f0f97>] bus_add_driver+0x1a7/0x220
  582. [    5.062003]  [<c0381410>] pci_device_remove+0x0/0x40
  583. [    5.062056]  [<c03f200c>] driver_register+0x5c/0x130
  584. [    5.062104]  [<c072987c>] alsa_seq_dummy_init+0x0/0xc5
  585. [    5.062152]  [<c0729941>] alsa_card_azx_init+0x0/0x1f
  586. [    5.062200]  [<c0381717>] __pci_register_driver+0x47/0x90
  587. [    5.062884]  [<c0729941>] alsa_card_azx_init+0x0/0x1f
  588. [    5.062932]  [<c0201036>] _stext+0x36/0x1b0
  589. [    5.062982]  [<c0263bef>] __alloc_pages_internal+0xaf/0x460
  590. [    5.063039]  [<c036dd5a>] idr_get_empty_slot+0xea/0x270
  591. [    5.063087]  [<c036dfe5>] ida_get_new_above+0x105/0x1c0
  592. [    5.063134]  [<c036e1b5>] idr_pre_get+0x35/0x70
  593. [    5.063183]  [<c02ce196>] proc_register+0x106/0x1d0
  594. [    5.063231]  [<c02cdd0e>] __proc_create+0x8e/0x110
  595. [    5.063288]  [<c02ce364>] create_proc_entry+0x54/0xa0
  596. [    5.063336]  [<c0259cab>] register_irq_proc+0xab/0xc0
  597. [    5.063383]  [<c0259d19>] init_irq_proc+0x59/0x70
  598. [    5.063432]  [<c07042fd>] kernel_init+0x117/0x16d
  599. [    5.063480]  [<c07041e6>] kernel_init+0x0/0x16d
  600. [    5.063527]  [<c0204ca7>] kernel_thread_helper+0x7/0x10
  601. [    5.063580] ---[ end trace 0df86071f43301ed ]---
  602. [    5.063628] kobject_add_internal failed for audio with -EEXIST, don't try to register things with the same name in the same directory.
  603. [    5.063702] Pid: 1, comm: swapper Tainted: G        W  2.6.28-gentoo #5
  604. [    5.063749] Call Trace:
  605. [    5.063796]  [<c036ec92>] kobject_add_internal+0x112/0x1c0
  606. [    5.063843]  [<c036ee9d>] kobject_add+0x2d/0x60
  607. [    5.063890]  [<c036eaff>] kobject_get+0xf/0x20
  608. [    5.063938]  [<c03ef94a>] device_add+0xda/0x620
  609. [    5.063985]  [<c036e8ea>] kobject_init+0x2a/0xa0
  610. [    5.064042]  [<c03eff53>] device_create_vargs+0xb3/0xd0
  611. [    5.064090]  [<c03eff9b>] device_create+0x2b/0x30
  612. [    5.064137]  [<c04acf17>] sound_insert_unit+0x117/0x1e0
  613. [    5.064185]  [<c04ad130>] register_sound_special_device+0x90/0x1b0
  614. [    5.064233]  [<c0373aa0>] vsnprintf+0x3c0/0x7e0
  615. [    5.064291]  [<c04bd079>] snd_register_oss_device+0x1d9/0x250
  616. [    5.064339]  [<c04cea2f>] register_oss_dsp+0x5f/0xa0
  617. [    5.064387]  [<c023e75f>] call_usermodehelper_exec+0x6f/0x90
  618. [    5.064435]  [<c036f4e8>] kobject_uevent_env+0xf8/0x3a0
  619. [    5.064482]  [<c036dd5a>] idr_get_empty_slot+0xea/0x270
  620. [    5.064530]  [<c036df60>] ida_get_new_above+0x80/0x1c0
  621. [    5.064577]  [<c04ceae9>] snd_pcm_oss_register_minor+0x79/0xf0
  622. [    5.064625]  [<c02d75c0>] sysfs_ilookup_test+0x0/0x10
  623. [    5.064673]  [<c04bc844>] snd_device_new+0x24/0x80
  624. [    5.064720]  [<c04bec48>] snd_timer_dev_register+0xe8/0x120
  625. [    5.064768]  [<c04bc5b7>] snd_device_register+0x57/0x70
  626. [    5.064816]  [<c04ca800>] snd_pcm_timer_init+0x130/0x180
  627. [    5.064863]  [<c04c1e9c>] snd_pcm_dev_register+0x17c/0x250
  628. [    5.064911]  [<c04bc5fd>] snd_device_register_all+0x2d/0x50
  629. [    5.064959]  [<c04b856a>] snd_card_register+0x1a/0x2d0
  630. [    5.065017]  [<c05a8426>] azx_probe+0x706/0xb90
  631. [    5.065064]  [<c04e3170>] azx_get_response+0x0/0x1f0
  632. [    5.065112]  [<c03814c6>] pci_device_probe+0x56/0x80
  633. [    5.065160]  [<c03f1cd6>] driver_probe_device+0x86/0x1a0
  634. [    5.065209]  [<c03813b0>] pci_match_device+0xa0/0xc0
  635. [    5.065267]  [<c03f1e79>] __driver_attach+0x89/0x90
  636. [    5.065315]  [<c0381410>] pci_device_remove+0x0/0x40
  637. [    5.065363]  [<c03f1604>] bus_for_each_dev+0x44/0x70
  638. [    5.065411]  [<c0381410>] pci_device_remove+0x0/0x40
  639. [    5.065458]  [<c03f1b66>] driver_attach+0x16/0x20
  640. [    5.065507]  [<c03f1df0>] __driver_attach+0x0/0x90
  641. [    5.065554]  [<c03f0f97>] bus_add_driver+0x1a7/0x220
  642. [    5.065602]  [<c0381410>] pci_device_remove+0x0/0x40
  643. [    5.065650]  [<c03f200c>] driver_register+0x5c/0x130
  644. [    5.065697]  [<c072987c>] alsa_seq_dummy_init+0x0/0xc5
  645. [    5.065745]  [<c0729941>] alsa_card_azx_init+0x0/0x1f
  646. [    5.065793]  [<c0381717>] __pci_register_driver+0x47/0x90
  647. [    5.065841]  [<c0729941>] alsa_card_azx_init+0x0/0x1f
  648. [    5.065888]  [<c0201036>] _stext+0x36/0x1b0
  649. [    5.065936]  [<c0263bef>] __alloc_pages_internal+0xaf/0x460
  650. [    5.065984]  [<c036dd5a>] idr_get_empty_slot+0xea/0x270
  651. [    5.066041]  [<c036dfe5>] ida_get_new_above+0x105/0x1c0
  652. [    5.066088]  [<c036e1b5>] idr_pre_get+0x35/0x70
  653. [    5.066136]  [<c02ce196>] proc_register+0x106/0x1d0
  654. [    5.066184]  [<c02cdd0e>] __proc_create+0x8e/0x110
  655. [    5.066231]  [<c02ce364>] create_proc_entry+0x54/0xa0
  656. [    5.066290]  [<c0259cab>] register_irq_proc+0xab/0xc0
  657. [    5.066337]  [<c0259d19>] init_irq_proc+0x59/0x70
  658. [    5.066385]  [<c07042fd>] kernel_init+0x117/0x16d
  659. [    5.066433]  [<c07041e6>] kernel_init+0x0/0x16d
  660. [    5.066481]  [<c0204ca7>] kernel_thread_helper+0x7/0x10
  661. [    5.069433] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
  662. [    5.069489] HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 19 (level, low) -> IRQ 19
  663. [    5.069602] HDA Intel 0000:02:00.1: setting latency timer to 64
  664. [    5.095391] ALSA device list:
  665. [    5.095440]   #0: HDA NVidia at 0xdfdf8000 irq 22
  666. [    5.095487]   #1: HDA ATI HDMI at 0xdffec000 irq 19
  667. [    5.095572] Netfilter messages via NETLINK v0.30.
  668. [    5.095635] nf_conntrack version 0.5.0 (14329 buckets, 57316 max)
  669. [    5.096210] TCP cubic registered
  670. [    5.096267] NET: Registered protocol family 17
  671. [    5.096474] RPC: Registered udp transport module.
  672. [    5.096521] RPC: Registered tcp transport module.
  673. [    5.097203] SCTP: Hash tables configured (established 65536 bind 65536)
  674. [    5.099318] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
  675. [    5.099443] powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0xe
  676. [    5.099491] powernow-k8:    1 : fid 0xe (2200 MHz), vid 0x10
  677. [    5.099539] powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x10
  678. [    5.099586] powernow-k8:    3 : fid 0xa (1800 MHz), vid 0x10
  679. [    5.099633] powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
  680. [    5.099949] Using IPI No-Shortcut mode
  681. [    5.123117] kjournald starting.  Commit interval 5 seconds
  682. [    5.123132] EXT3-fs: mounted filesystem with ordered data mode.
  683. [    5.123147] VFS: Mounted root (ext3 filesystem) readonly.
  684. [    5.123385] Freeing unused kernel memory: 332k freed
  685. [    7.853056] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
  686. [    7.853071] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
  687. [    8.110789] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
  688. [    8.134502] [fglrx] Maximum main memory to use for locked dma buffers: 801 MBytes.
  689. [    8.134735] [fglrx]   vendor: 1002 device: 9588 count: 1
  690. [    8.135137] [fglrx] ioport: bar 4, base 0xe800, size: 0x100
  691. [    8.135461] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
  692. [    8.135472] pci 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 18 (level, low) -> IRQ 18
  693. [    8.135477] pci 0000:02:00.0: setting latency timer to 64
  694. [    8.135905] [fglrx] Driver built-in PAT support is enabled successfully
  695. [    8.135935] [fglrx] module loaded - fglrx 8.58.2 [Feb  4 2009] with 1 minors
  696. [    8.213799] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
  697. [    8.213811] rt61pci 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
  698. [    8.219740] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80
  699. [    8.219742] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff
  700. [    8.219746] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0302, rf: 0003, rev: 0002561c.
  701. [    8.220050] phy0: Selected rate control algorithm 'pid'
  702. [    8.221383] Registered led device: rt61pci-phy0:radio
  703. [    8.221398] Registered led device: rt61pci-phy0:assoc
  704. [    8.696021] EXT3 FS on sda5, internal journal
  705. [    8.935451] loaded kvm module (kvm-84)
  706. [    8.968129] PPP generic driver version 2.4.2
  707. [    8.968893] PPP MPPE Compression module registered
  708. [    9.237384] Adding 522072k swap on /dev/sda6.  Priority:-1 extents:1 across:522072k
  709. [   16.383952] forcedeth 0000:00:07.0: irq 316 for MSI/MSI-X
  710. [   20.177804] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'.
  711. [   20.177809] rt61pci 0000:01:09.0: firmware: requesting rt2561.bin
  712. [   20.241653] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8.
  713. [   20.261048] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
  714. [   20.261056] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
  715. [   20.261063] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
  716. [   20.261069] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
  717. [   21.068286] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  718. [   21.068294] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  719. [   21.068300] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  720. [   21.068307] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  721. [   21.068315] wlan0: authenticate with AP 00:1d:e5:4c:56:80
  722. [   21.268027] wlan0: authenticate with AP 00:1d:e5:4c:56:80
  723. [   21.468029] wlan0: authenticate with AP 00:1d:e5:4c:56:80
  724. [   21.668278] wlan0: authentication with AP 00:1d:e5:4c:56:80 timed out
  725. [   30.691020] Clocksource tsc unstable (delta = -83314201 ns)
  726. [   31.830135] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  727. [   31.830146] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  728. [   31.830156] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  729. [   31.830164] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
  730. [   31.830174] wlan0: authenticate with AP 00:1d:e5:4c:56:80
  731. [   31.832570] wlan0: authenticated
  732. [   31.832573] wlan0: associate with AP 00:1d:e5:4c:56:80
  733. [   31.836760] wlan0: RX AssocResp from 00:1d:e5:4c:56:80 (capab=0x431 status=0 aid=59)
  734. [   31.836763] wlan0: associated
  735. [   33.673768] [fglrx] Firegl kernel thread PID: 5403
  736. [   33.717108] [fglrx] Gart USWC size:376 M.
  737. [   33.717111] [fglrx] Gart cacheable size:60 M.
  738. [   33.717117] [fglrx] Reserved FB block: Shared offset:0, size:1000000
  739. [   33.717119] [fglrx] Reserved FB block: Unshared offset:ff15000, size:e7000
  740. [   33.717122] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
  741. [   34.459472] fuse init (API version 7.10)
  742. [  362.549128] ip_tables: (C) 2000-2006 Netfilter Core Team
  743. [ 1854.781936] forcedeth 0000:00:07.0: irq 316 for MSI/MSI-X
  744. [ 1856.025941] forcedeth 0000:00:07.0: irq 316 for MSI/MSI-X
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top