Advertisement
Guest User

root

a guest
Dec 9th, 2009
118
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.54 KB | None | 0 0
  1. Script started on Wed Dec 9 20:08:46 2009
  2. server# cu -l /dev/cuau0 -115200
  3. Connected
  4.  
  5.  
  6. RouterBOOT booter 2.15
  7.  
  8. RouterBoard 450
  9.  
  10. CPU frequency: 300 MHz
  11. Memory size: 32 MB
  12.  
  13. Press any key within 2 seconds to enter setup..
  14. trying bootp protocol... OK
  15. Got IP address: 192.168.0.150
  16. resolved mac address 00:08:54:0E:55:77
  17. Gateway: 192.168.0.1
  18. transfer started ..................................... transfer ok, time=2.91s
  19. setting up elf image... OK
  20. jumping to kernel code
  21. Warning: using the default setting for memory size !
  22. platform frequency: 300000000
  23. arguments:
  24. a0 = 00000007
  25. a1 = a0861c00
  26. a2 = 00000000
  27. a3 = 00000000
  28. Cmd line: console=ttyS0,115200 gpio=4031 HZ=150000000 mem=32M kmac=00:0C:42:2F:58:33 board=450 boot=1
  29. Environment:
  30. envp is invalid
  31. Cache info:
  32. picache_stride = 4096
  33. picache_loopcount = 16
  34. pdcache_stride = 4096
  35. pdcache_loopcount = 8
  36. cpu0: MIPS Technologies processor v116.147
  37. MMU: Standard TLB, 16 entries
  38. L1 i-cache: 4 ways of 512 sets, 32 bytes per line
  39. L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  40. Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  41. Config3=0x20
  42. KDB: debugger backends: ddb
  43. KDB: current backend: ddb
  44. Copyright (c) 1992-2009 The FreeBSD Project.
  45. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  46. The Regents of the University of California. All rights reserved.
  47. FreeBSD is a registered trademark of The FreeBSD Foundation.
  48. FreeBSD 9.0-CURRENT #11: Tue Dec 8 17:08:20 BRST 2009
  49. root@server.rede.int.br:/data/obj/mips/mips/data/mips/sys/RB4XX mips
  50. real memory = 33554432 (32768K bytes)
  51. Physical memory chunk(s):
  52. 0x004c1000 - 0x01f46fff, 27811840 bytes (6790 pages)
  53. avail memory = 27459584 (26MB)
  54. wlan: <802.11 Link Layer>
  55. mem: <memory>
  56. null: <null device, zero device>
  57. nfslock: pseudo-device
  58. random: <entropy source, Software, Yarrow>
  59. nexus0: <MIPS32 root nexus>
  60. clock0: <Generic MIPS32 ticker> on nexus0
  61. clock0: [FILTER]
  62. apb0 at irq 4 on nexus0
  63. apb0: [FILTER]
  64. uart0: <16550 or compatible> on apb0
  65. uart0: [FILTER]
  66. uart0: fast interrupt
  67. uart0: console (115200,n,8,1)
  68. arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
  69. arge0: bpf attached
  70. arge0: Ethernet address: 00:0c:42:2f:58:33
  71. arge0: [MPSAFE]
  72. arge0: [FILTER+ITHREAD]
  73. arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
  74. miibus0: <MII bus> on arge1
  75. ukphy0: <Generic IEEE 802.3u media interface> PHY 4 on miibus0
  76. ukphy0: OUI 0x0090c3, model 0x0018, rev. 0
  77. ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  78. arge1: bpf attached
  79. arge1: Ethernet address: 00:0c:42:2f:58:34
  80. arge1: [MPSAFE]
  81. arge1: [FILTER+ITHREAD]
  82. ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
  83. ar71xx_gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff on nexus0
  84. Press the reset button to continue...
  85. spi0: <AR71XX SPI> at mem 0x1f000000-0x1fffffff on nexus0
  86. spibus0: <spibus bus> on spi0
  87. rb_nand0: <Hynix 64MiB 8bit Nand Flash> at cs 0 on spibus0
  88. Device configuration finished.
  89. Timecounter "MIPS32" frequency 150000000 Hz quality 800
  90. Timecounters tick every 1.000 msec
  91. lo0: bpf attached
  92. bootpc_init: wired to interface 'arge1'
  93. Sending DHCP Discover packet from interface arge1 (00:0c:42:2f:58:34)
  94. arge1: link state changed to UP
  95. GEOM: new disk nand0
  96. nand_rw_data: 0xc0844c00 -> 1... ooopss
  97. nand_rw_data: 512 -> 6... ooopss
  98. rb_nand_read read 512 bytes
  99. rb_nand_read read 16 bytes
  100. nand_rw_data: nand_fix_data... ooopss
  101. nand_rw_data: 0xc0844c00 -> 1... ooopss
  102. nand_rw_data: 512 -> 6... ooopss
  103. rb_nand_read read 512 bytes
  104. rb_nand_read read 16 bytes
  105. nand_rw_data: nand_fix_data... ooopss
  106. Received DHCP Offer packet on arge1 from 192.168.0.1 (accepted) (no root path)
  107. Received DHCP Offer packet on arge1 from 192.168.0.1 (ignored) (no root path)
  108. Sending DHCP Request packet from interface arge1 (00:0c:42:2f:58:34)
  109. Received DHCP Ack packet on arge1 from 192.168.0.1 (accepted) (got root path)
  110. arge1 at 192.168.0.150 server 192.168.0.1 boot file kernel.rb450
  111. subnet mask 255.255.255.0 router 192.168.0.1 rootfs 192.168.0.1:/data/nfsroot/rb450
  112. Adjusted interface arge1
  113. ifa_del_loopback_route: deletion failed
  114. Trying to mount root from nfs:
  115. NFS ROOT: 192.168.0.1:/data/nfsroot/rb450
  116. warning: no time-of-day clock registered, system time will not be set accurately
  117. warning: no time-of-day clock registered, system time will not be set accurately
  118. start_init: trying /sbin/init
  119. Interface arge1 IP-Address 192.168.0.150 Broadcast 192.168.0.255
  120. No suitable dump device was found.
  121. Entropy harvesting: interrupts ethernet point_to_point kickstart.
  122. mount_nfs: can't update /var/db/mounttab for 192.168.0.1:/data/nfsroot/rb450
  123. Additional TCP/IP options: rfc1323 extensions=NO.
  124. Starting Network: lo0 arge0 arge1.
  125. Starting devd.
  126. devd: cannot open pid file: Operation not supported
  127. Mounting NFS file systems:.
  128. Starting syslogd.
  129. syslogd: cannot open pid file: Operation not supported
  130. /etc/rc: WARNING: Dump device does not exist. Savecore not run.
  131. Starting ntpd.
  132. Starting sshd.
  133. Starting cron.
  134. cron: can't open or create /var/run/cron.pid: Operation not supported
  135. /etc/rc: WARNING: failed to start cron
  136. Adding /usr/swap0 as additional swap
  137.  
  138. Thu Jan 1 00:00:42 BRT 1970
  139.  
  140. FreeBSD/mips (rb450) (ttyu0)
  141.  
  142. login: root
  143. Jan 1 00:00:46 rb450 login: ROOT LOGIN (root) ON ttyu0
  144. Last login: Tue Dec 8 17:36:15 on ttyu0
  145. Copyright (c) 1992-2009 The FreeBSD Project.
  146. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  147. The Regents of the University of California. All rights reserved.
  148.  
  149. FreeBSD 9.0-CURRENT (RB4XX) #11: Tue Dec 8 17:08:20 BRST 2009
  150.  
  151. Welcome to FreeBSD!
  152.  
  153. Before seeking technical support, please use the following resources:
  154.  
  155. o Security advisories and updated errata information for all releases are
  156. at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
  157. for your release first as it's updated frequently.
  158.  
  159. o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
  160. along with the mailing lists, can be searched by going to
  161. http://www.FreeBSD.org/search/. If the doc distribution has
  162. been installed, they're also available formatted in /usr/share/doc.
  163.  
  164. If you still have a question or problem, please take the output of
  165. `uname -a', along with any relevant error messages, and email it
  166. as a question to the questions@FreeBSD.org mailing list. If you are
  167. unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
  168. manual page. If you are not familiar with manual pages, type `man man'.
  169.  
  170. You may also use sysinstall(8) to re-enter the installation and
  171. configuration utility. Edit /etc/motd to change this login announcement.
  172.  
  173. rb450# uptime
  174. 8:10PM up 49 secs, 1 user, load averages: 0.66, 0.19, 0.07
  175. rb450# date
  176. Wed Dec 9 20:10:06 BRST 2009
  177. rb450# ifconfig
  178. arge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  179. ether 00:0c:42:2f:58:33
  180. inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
  181. inet 10.1.1.2 netmask 0xffffffff broadcast 10.1.1.2
  182. inet 10.1.1.3 netmask 0xffffffff broadcast 10.1.1.3
  183. inet 10.1.1.4 netmask 0xffffffff broadcast 10.1.1.4
  184. media: Ethernet 100baseTX <full-duplex>
  185. status: active
  186. arge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  187. ether 00:0c:42:2f:58:34
  188. inet 192.168.0.150 netmask 0xffffff00 broadcast 192.168.0.255
  189. media: Ethernet autoselect (100baseTX <full-duplex>)
  190. status: active
  191. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  192. options=3<RXCSUM,TXCSUM>
  193. inet 127.0.0.1 netmask 0xff000000
  194. rb450# exit
  195. logout
  196.  
  197. FreeBSD/mips (rb450) (ttyu0)
  198.  
  199. login: ~
  200. [EOT]
  201. server# exit
  202.  
  203. Script done on Wed Dec 9 20:10:29 2009
  204.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement