API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 22nd, 2017
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 41.98 KB | None | 0 0
raw download clone embed print report
  1. [2017-08-22 02:10:06] [Output] : ★ Riley Baxter would press the accelerator in her E92 gently, driving it up onto the hydraulic lift.
  2. [2017-08-22 02:10:28] [Output] : ★ Riley Baxter turns the key, cutting off the engine, walking towards her toolstation and picking out
  3. [2017-08-22 02:10:45] [Output] : ★ one torque wrench, a few containers and a socket set. ((Riley Baxter))
  4. [2017-08-22 02:11:00] [Output] : ★ Riley Baxter walks back to her E92, setting the tools onto the floor and walking over to the ramp
  5. [2017-08-22 02:12:07] [Output] : ★ controls, raising the car into the air. ((Riley Baxter))
  6. [2017-08-22 02:12:20] [Output] : ★ Riley Baxter flicks a lever to lock the center rails into position.
  7. [2017-08-22 02:12:27] [Output] : ★ Riley Baxter would lower the lift again.
  8. [2017-08-22 02:12:40] [Output] : ★ The lift would lower and leave the vehicle suspended on the center rails. ((Riley Baxter))
  9. [2017-08-22 02:13:20] [Output] : ★ Riley Baxter leans into the car, flicking a button to unlock the hood.
  10. [2017-08-22 02:14:42] [Output] : ★ Riley Baxter steps back out, walking over to the hood and gripping the latch, lifting the hood
  11. [2017-08-22 02:14:49] [Output] : ★ up and supporting it onto it's rod. ((Riley Baxter))
  12. [2017-08-22 02:17:52] [Output] : ★ Riley Baxter leans herself under the car, sliding a few containers with her and positioning one under
  13. [2017-08-22 02:17:59] [Output] : ★ the radiator, and one under the intercooler. ((Riley Baxter))
  14. [2017-08-22 02:18:46] [Output] : ★ Riley Baxter moves her hands to the intercooler drain cap, turning and removing it.
  15. [2017-08-22 02:19:01] [Output] : ★ The intercooler fluids would drain out into a container until completely empty. ((Riley Baxter))
  16. [2017-08-22 02:19:15] [Output] : ★ Riley Baxter closes the cap back up, moving her hands to the radiator cap and twisting it.
  17. [2017-08-22 02:19:28] [Output] : ★ The radiator would drain into the bucket until empty. ((Riley Baxter))
  18. [2017-08-22 02:19:46] [Output] : ★ Riley Baxter moves both containers from under the car, standing herself up and leaning back into
  19. [2017-08-22 02:20:00] [Output] : ★ the engine bay, taking out a ratchet, and adding a socket to the end. ((Riley Baxter))
  20. [2017-08-22 02:20:20] [Output] : ★ Riley Baxter looks down to the 4 radiator bolts holding the radiator to it's supporting bracket.
  21. [2017-08-22 02:20:32] [Output] : ★ Riley Baxter would take her ratchet, beginning to loosen all the bolts up.
  22. [2017-08-22 02:20:57] [Output] : ★ Riley would unbolt all four bolts using the ratchet, going around each individual bolt, ((Riley Baxter))
  23. [2017-08-22 02:21:09] [Output] : ★ until she could lift out the radiator, disconnecting the hoses with a free hand. ((Riley Baxter))
  24. [2017-08-22 02:21:23] [Output] : ★ Riley Baxter disconnects the fan's electrical connector, throwing the old radiator and fan to the side.
  25. [2017-08-22 02:23:56] [Output] : ★ Riley Baxter picks her ratchet back up, looking down to the intercooler and noting the bolts.
  26. [2017-08-22 02:24:11] [Output] : ★ Riley Baxter presses the end of the ratchet to the first intercooler bolt, going around the other three
  27. [2017-08-22 02:24:17] [Output] : ★ as she'd begin to loosen them. ((Riley Baxter))
  28. [2017-08-22 02:24:33] [Output] : ★ Riley would use the ratchet to loosen all four bolts until she could lift out the old ((Riley Baxter))
  29. [2017-08-22 02:24:46] [Output] : ★ intercooler, disconnecting both pipes from the side and throwing it away. ((Riley Baxter))
  30. [2017-08-22 02:25:04] [Output] : ★ Riley Baxter reaches down to her new parts, picking out her new radiator and lifting it up.
  31. [2017-08-22 02:26:04] [Output] : ★ Riley Baxter sets it down into the engine bay, against the OEM brackets, threading all four bolts
  32. [2017-08-22 02:26:08] [Output] : ★ through with her hand. ((Riley Baxter))
  33. [2017-08-22 02:26:24] [Output] : ★ Riley Baxter would take her ratchet, beginning to tighten all four bolts up.
  34. [2017-08-22 02:26:40] [Output] : ★ Riley would go about each individual bolt, tightening with her ratchet until they were all ((Riley Baxter))
  35. [2017-08-22 02:26:44] [Output] : ★ tightly in position. ((Riley Baxter))
  36. [2017-08-22 02:27:03] [Output] : ★ Riley Baxter takes the electrical connector of her new fan, plugging it back into the loom of the E92.
  37. [2017-08-22 02:27:38] [Output] : ★ Riley Baxter connects both pipings to the side of her new radiator, strapping them firmly into position.
  38. [2017-08-22 02:28:43] [Output] : ★ Riley Baxter takes a bottle of coolant, beginning to fill the radiator until it was full, closing the cap
  39. [2017-08-22 02:28:46] [Output] : ★ back up afterwards. ((Riley Baxter))
  40. [2017-08-22 02:29:15] [Output] : ★ Riley Baxter now reaches back down to her parts, lifting up the intercooler and leaning into the engine
  41. [2017-08-22 02:29:24] [Output] : ★ bay, slotting it down into the original bracket. ((Riley Baxter))
  42. [2017-08-22 02:29:39] [Output] : ★ Riley Baxter takes all four bolts, threading them in with her fingers, taking her ratchet back out again.
  43. [2017-08-22 02:30:33] [Output] : ★ Riley Baxter begins tightening the bolts up, using her ratchet.
  44. [2017-08-22 02:30:53] [Output] : ★ She would go around all four bolts individually, tightening them with the ratchet until they ((Riley Baxter))
  45. [2017-08-22 02:31:03] [Output] : ★ would hold the new intercooler firmly into position. ((Riley Baxter))
  46. [2017-08-22 02:32:09] [Output] : ★ Riley Baxter connects both pipings to the sides of the intercooler, picking up her bottle of coolant agai
  47. [2017-08-22 02:32:24] [Output] : ★ Riley Baxter begins filling the intercooler with the coolant until it was full again.
  48. [2017-08-22 02:34:08] [Output] : ★ Riley Baxter looks around the engine bay until she'd come across the fusebox, looking in and finding
  49. [2017-08-22 02:34:19] [Output] : ★ the fuel pump relay fuse, pulling it away and setting it to the side. ((Riley Baxter))
  50. [2017-08-22 02:35:10] [Output] : ★ Riley Baxter walks over to the ignition, turning the keys to start the engine.
  51. [2017-08-22 02:35:34] [Output] : ★ The BMW would start up briefly, cutting out afterwards. She'd turn the key back. ((Riley Baxter))
  52. [2017-08-22 02:35:58] [Output] : ★ Riley Baxter walks back over to the engine bay, picking up a screwdriver on her way, locating the fuel
  53. [2017-08-22 02:36:09] [Output] : ★ rail, noting down all the screws holding it in place. ((Riley Baxter))
  54. [2017-08-22 02:36:18] [Output] : ★ Riley Baxter begins unscrewing the fuel rail using a screwdriver.
  55. [2017-08-22 02:36:36] [Output] : ★ The fuel rail would begin to come free as Riley would go about unscrewing each individual ((Riley Baxter))
  56. [2017-08-22 02:36:41] [Output] : ★ screw with her tool. ((Riley Baxter))
  57. [2017-08-22 02:36:58] [Output] : ★ Riley Baxter lifts the fuel rail slightly, until she could find the injectors
  58. [2017-08-22 02:37:30] [Output] : ★ Riley Baxter unplugs the first electrical connection on the injector, lifting it out and throwing it away
  59. [2017-08-22 02:37:41] [Output] : ★ Riley Baxter picks up one of her new injectors, adding the connection back in.
  60. [2017-08-22 02:40:59] [Output] : ★ Riley Baxter moves onto the second injector, unplugging the electrical connector and lifting it out.
  61. [2017-08-22 02:41:14] [Output] : ★ Riley Baxter takes one of her new injectors, slotting it into position and adding the electrical connecto
  62. [2017-08-22 02:41:17] [Output] : ★ back into it. ((Riley Baxter))
  63. [2017-08-22 02:42:21] [Output] : ★ Riley Baxter moves onto the third injector, removing the electrical connector and pulling out the
  64. [2017-08-22 02:42:33] [Output] : ★ old injector, picking out one of her new ones and sliding it into position. ((Riley Baxter))
  65. [2017-08-22 02:42:47] [Output] : ★ Riley Baxter adds the electrical connector back in, moving onto the fourth injector.
  66. [2017-08-22 02:43:14] [Output] : ★ Riley Baxter unplugs the connector on the fourth injector, pulling it out and picking up a new injector,
  67. [2017-08-22 02:43:25] [Output] : ★ sliding it down into position and adding the electrical connector back in. ((Riley Baxter))
  68. [2017-08-22 02:43:51] [Output] : ★ Riley Baxter moves onto the fifth injector, removing the electrical connector and pulling the old
  69. [2017-08-22 02:44:15] [Output] : ★ injector away, throwing it to the side as she'd pick up a new injector, setting it down into ((Riley Baxter))
  70. [2017-08-22 02:44:24] [Output] : ★ position and adding the electrical connector in. ((Riley Baxter))
  71. [2017-08-22 02:44:38] [Output] : ★ Riley Baxter moves onto the final injector, unplugging the connector and pulling it away from its
  72. [2017-08-22 02:44:53] [Output] : ★ original position, picking out her last injector and adding it back into ((Riley Baxter))
  73. [2017-08-22 02:45:07] [Output] : ★ position, connecting the electrical connector and moving the fuel rail back. ((Riley Baxter))
  74. [2017-08-22 02:45:33] [Output] : ★ Riley Baxter threads all the screws in individually, before using her screwdriver to tighten them.
  75. [2017-08-22 02:47:32] [Output] : ★ Riley would go about each individual screw, tightening it until the fuel rail would sit ((Riley Baxter))
  76. [2017-08-22 02:47:39] [Output] : ★ tightly in it's original position. ((Riley Baxter))
  77. [2017-08-22 02:48:05] [Output] : ★ Riley Baxter stands up, taking her ratchet over to the trunk and opening it up, setting the ratchet insid
  78. [2017-08-22 02:48:24] [Output] : ★ Riley Baxter picks up a flathead screwdriver and a hammer from nearby, lifting the boot flooring upwards.
  79. [2017-08-22 02:48:40] [Output] : ★ Riley Baxter would find the fuel pump, disconnecting the electrical connector from the top.
  80. [2017-08-22 02:49:02] [Output] : ★ Riley Baxter sets the screwdriver against the pump, lightly tapping it around to begin unscrewing the pum
  81. [2017-08-22 02:49:19] [Output] : ★ Eventually, the fuel pump would come out, and Riley would lift it up and drop it onto a ((Riley Baxter))
  82. [2017-08-22 02:49:25] [Output] : ★ fireproof mat. ((Riley Baxter))
  83. [2017-08-22 02:49:43] [Output] : ★ Riley Baxter walks back over to her parts, picking out her new fuel pump and walking back to the car with
  84. [2017-08-22 02:49:51] [Output] : ★ it, leaning into the trunk once more. ((Riley Baxter))
  85. [2017-08-22 02:50:28] [Output] : ★ Riley Baxter slides the new pump into position, twisting it as tight as she could until it
  86. [2017-08-22 02:50:34] [Output] : ★ sat in rough position. ((Riley Baxter))
  87. [2017-08-22 02:50:49] [Output] : ★ Riley Baxter sets the end of the screwdriver against the fuel pump, using the hammer to lightly
  88. [2017-08-22 02:50:54] [Output] : ★ tap it into position. ((Riley Baxter))
  89. [2017-08-22 02:51:10] [Output] : ★ Eventually, the fuel pump would sit tightly in it's position, and Riley would reconnect the ((Riley Baxter))
  90. [2017-08-22 02:51:13] [Output] : ★ electrical connector. ((Riley Baxter))
  91. [2017-08-22 02:52:00] [Output] : ★ Riley Baxter walks back over to the engine bay, finding the fusebox once more and picking her
  92. [2017-08-22 02:52:11] [Output] : ★ fuel pump relay fuse again, slotting it into position. ((Riley Baxter))
  93. [2017-08-22 02:53:10] [Output] : ★ Riley Baxter picks her ratchet up, walking over to the drivers side and leaning down into the footwell.
  94. [2017-08-22 02:53:28] [Output] : ★ Looking under the seat, she would see four bolts holding the seat and rails in it's position ((Riley Baxter))
  95. [2017-08-22 02:53:38] [Output] : ★ Riley Baxter would begin untightening the bolts using her ratchet.
  96. [2017-08-22 02:53:54] [Output] : ★ Riley would begin first with the two front bolts, untightening them with her ratchet, before ((Riley Baxter))
  97. [2017-08-22 02:54:09] [Output] : ★ struggling, but suceeding to move to the rear two bolts, removing them. ((Riley Baxter))
  98. [2017-08-22 02:55:35] [Output] : ★ Riley Baxter stands back up, gripping the seat and lifting it upwards.
  99. [2017-08-22 02:55:51] [Output] : ★ Riley would struggle, but eventually, the first seat would free itself, and Riley would set ((Riley Baxter))
  100. [2017-08-22 02:55:53] [Output] : ★ it to the side. ((Riley Baxter))
  101. [2017-08-22 02:56:14] [Output] : ★ Riley Baxter picks up her new bucket seat, unwrapping it from the packaging and lifting it into
  102. [2017-08-22 02:56:33] [Output] : ★ the car, setting it down into position. ((Riley Baxter))
  103. [2017-08-22 02:56:47] [Output] : ★ Riley Baxter leans down into the footwell, looking under the seat and threading the four bolts through
  104. [2017-08-22 02:57:01] [Output] : ★ with her fingers, picking her ratchet up and beginning to tighten them all. ((Riley Baxter))
  105. [2017-08-22 02:57:14] [Output] : ★ Riley would go about each individual bolt, tightening them with a ratchet until they were ((Riley Baxter))
  106. [2017-08-22 02:57:19] [Output] : ★ in their positions. ((Riley Baxter))
  107. [2017-08-22 02:57:40] [Output] : ★ Riley Baxter stands herself back up and out of the car, picking another bucket seat up and lifting it
  108. [2017-08-22 02:57:47] [Output] : ★ over to the passenger side, setting it aside. ((Riley Baxter))
  109. [2017-08-22 02:58:19] [Output] : ★ Riley Baxter leans herself into the passenger footwell, picking up her ratchet and beginning to
  110. [2017-08-22 02:58:30] [Output] : ★ untighten the four bolts holding the seat in it's position. ((Riley Baxter))
  111. [2017-08-22 02:58:38] [Output] : - Leader Riley Baxter (Nachtfalke)
  112. [2017-08-22 02:59:02] [Output] : ★ Riley would go about each individual bolt, untightening them until they were all free. ((Riley Baxter))
  113. [2017-08-22 02:59:23] [Output] : ★ Riley Baxter stands herself up, gripping her hands on the seat and roughly lifting it up, pulling it out
  114. [2017-08-22 02:59:29] [Output] : ★ of the car and throwing it to the side. ((Riley Baxter))
  115. [2017-08-22 03:00:01] [Output] : ★ Riley Baxter unwraps her new bucket seat, lifting it up and setting it down into the interior of the car
  116. [2017-08-22 03:00:15] [Output] : ★ spending some time getting it into position, before laying herself down into the footwell. ((Riley Baxter))
  117. [2017-08-22 03:00:51] [Output] : ★ Riley Baxter uses her hands to thread all four bolts into position, picking up her ratchet once more
  118. [2017-08-22 03:00:56] [Output] : ★ and tightening them all. ((Riley Baxter))
  119. [2017-08-22 03:01:11] [Output] : ★ Riley would go about each individual bolt, tightening them all until the seat would sit firm ((Riley Baxter))
  120. [2017-08-22 03:01:17] [Output] : ★ with the chassis. ((Riley Baxter))
  121. [2017-08-22 03:02:27] [Output] : ★ Riley Baxter walks back over to the drivers side and leans down to her parts collection,
  122. [2017-08-22 03:02:42] [Output] : ★ finding out her 6 bolt rollcage, finding the drivers side caging first. ((Riley Baxter))
  123. [2017-08-22 03:03:36] [Output] : ★ Riley Baxter leans herself into the car, slotting the drivers side caging into position.
  124. [2017-08-22 03:04:01] [Output] : ★ Riley Baxter slowly moves out, picking up the roof caging next, lining it up with the drivers side caging
  125. [2017-08-22 03:04:33] [Output] : ★ and threading the first bolt through the roof and drivers side caging. ((Riley Baxter))
  126. [2017-08-22 03:04:40] [Output] : ★ Riley Baxter begins tightening the bolt with her ratchet.
  127. [2017-08-22 03:05:11] [Output] : ★ The bolt would tighten until the roof caging would sit with the driver side caging. ((Riley Baxter))
  128. [2017-08-22 03:05:47] [Output] : ★ Riley Baxter leans back out of her car, taking the passenger side caging and feeding it through
  129. [2017-08-22 03:06:02] [Output] : ★ the car, aligning it into position and against the roof caging, threading the bolt through. ((Riley Baxter))
  130. [2017-08-22 03:06:18] [Output] : ★ Riley Baxter begins tightening the bolt with a ratchet.
  131. [2017-08-22 03:06:31] [Output] : ★ The bolt would tighten with help from the ratchet until the roof caging would sit firmly ((Riley Baxter))
  132. [2017-08-22 03:06:35] [Output] : ★ with the passenger caging. ((Riley Baxter))
  133. [2017-08-22 03:07:19] [Output] : ★ Riley Baxter steps back from her car, walking over to her toolstation and picking out a welder and a mask
  134. [2017-08-22 03:07:37] [Output] : ★ Riley Baxter attaches the mask to herself, plugging the welder in and walking over to the drivers side.
  135. [2017-08-22 03:09:12] [Output] : ★ Riley Baxter takes out a knife, slicing through the carpetting and lifting it away, throwing it out
  136. [2017-08-22 03:09:15] [Output] : ★ of the car. ((Riley Baxter))
  137. [2017-08-22 03:09:35] [Output] : ★ Riley Baxter takes the torch in hand and begins welding from the bottom footing of the rollcage to the
  138. [2017-08-22 03:09:37] [Output] : ★ chassis. ((Riley Baxter))
  139. [2017-08-22 03:09:55] [Output] : ★ The weld would be clean and eventually hold the first leg of the cage to the chassis. ((Riley Baxter))
  140. [2017-08-22 03:10:11] [Output] : ★ Riley Baxter moves to the rear of the car, with a torch and a stanley knife in hand, cutting away
  141. [2017-08-22 03:10:23] [Output] : ★ any carpetting around where she was going to weld, until she found bare metal. ((Riley Baxter))
  142. [2017-08-22 03:10:38] [Output] : ★ Riley Baxter begins welding the rear drivers side leg to the chassis, using the welder.
  143. [2017-08-22 03:10:52] [Output] : ★ The weld would be made clean, and attach the drivers side completely to the chassis. ((Riley Baxter))
  144. [2017-08-22 03:11:15] [Output] : ★ Riley Baxter reaches herself over the passenger side of the car, leaning into the footwell with a stanley
  145. [2017-08-22 03:11:27] [Output] : ★ knife and cutting away any carpetting in the footwell, removing it from the car. ((Riley Baxter))
  146. [2017-08-22 03:11:49] [Output] : ★ Riley Baxter takes her torch, pressing it against the front rollcage leg and beginning to weld.
  147. [2017-08-22 03:12:02] [Output] : ★ The weld would support the third leg of the rollcage to the chassis with a firm line. ((Riley Baxter))
  148. [2017-08-22 03:12:18] [Output] : ★ Riley Baxter moves herself over to the rear passenger side, cutting away any carpetting around
  149. [2017-08-22 03:12:23] [Output] : ★ where she was about to weld. ((Riley Baxter))
  150. [2017-08-22 03:12:33] [Output] : ★ Riley Baxter begins welding the last leg of the rollcage to the chassis.
  151. [2017-08-22 03:12:45] [Output] : ★ The weld would be made and fully secure the rollcage to the chassis. ((Riley Baxter))
  152. [2017-08-22 03:13:04] [Output] : ★ Riley Baxter leans out of the car, turning the welder off and setting it aside.
  153. [2017-08-22 03:37:10] [Output] : ★ Riley Baxter picks out her harness set, leaning into the car and taking two ends of it.
  154. [2017-08-22 03:37:29] [Output] : ★ Riley Baxter wraps both rear ends against the rear rollcage, securing them into position.
  155. [2017-08-22 03:39:24] [Output] : ★ Riley Baxter takes the other two ends, threading them through the seats and clipping the harness together
  156. [2017-08-22 03:39:36] [Output] : ★ Riley Baxter moves back to the rear bar, retightening them so there would be no slack.
  157. [2017-08-22 03:43:38] [Output] : ★ Riley Baxter takes the other harness, moving on to the passenger seat and finding the two end straps.
  158. [2017-08-22 03:43:53] [Output] : ★ Riley Baxter wraps the ends around the rear bar, tightening them slightly.
  159. [2017-08-22 03:44:12] [Output] : ★ Riley Baxter takes the front straps, threading them through the seats and clipping them into position.
  160. [2017-08-22 03:44:26] [Output] : ★ Riley Baxter moves back to the rear bar, tightening the harness so there would be no slack.
  161. [2017-08-22 03:45:00] [Output] : ★ Riley Baxter leans back out of her car, leaning down to the parts and picking out her new ECU.
  162. [2017-08-22 03:47:31] [Output] : ★ Riley Baxter leans back into the car, leaning herself under the passenger footwell.
  163. [2017-08-22 03:47:47] [Output] : ★ Riley Baxter turns the torch on her phone on, looking around under the dashboard.
  164. [2017-08-22 03:47:55] [Output] : ★ Riley Baxter would locate the ECU, making a mental note of it.
  165. [2017-08-22 03:48:14] [Output] : ★ Riley Baxter picks out her ratchet, reaching around until the found the ECU, beginning to remove the
  166. [2017-08-22 03:48:20] [Output] : ★ four bolts holding it in place. ((Riley Baxter))
  167. [2017-08-22 03:48:39] [Output] : ★ Riley would begin untightening all four bolts until she could remove the ECU, pulling ((Riley Baxter))
  168. [2017-08-22 03:48:47] [Output] : ★ the electrical connector out and setting it down. ((Riley Baxter))
  169. [2017-08-22 03:49:41] [Output] : ★ Riley Baxter picks up her new ECU, lifting it into position and threading the four bolts in by hand.
  170. [2017-08-22 03:49:53] [Output] : ★ Riley Baxter begins tightening all four bolts using her ratchet.
  171. [2017-08-22 03:50:09] [Output] : ★ Riley would begin tightening all four bolts individually, until they would support the ECU ((Riley Baxter))
  172. [2017-08-22 03:50:12] [Output] : ★ into position. ((Riley Baxter))
  173. [2017-08-22 03:50:23] [Output] : ★ Riley Baxter takes the electrical connector, plugging it back into the ECU.
  174. [2017-08-22 03:53:24] [Output] : ★ Riley Baxter leans out of her car, leaning herself down to the driver side front wheel, picking up her
  175. [2017-08-22 03:54:19] [Output] : ★ torque wrench, pressing it to the first wheel nut. ((Riley Baxter))
  176. [2017-08-22 03:54:29] [Output] : ★ Riley Baxter begins using the torque wrench to remove the wheel nuts.
  177. [2017-08-22 03:54:47] [Output] : ★ Riley would untighten all five wheel nuts until she could pull them away, setting the torque ((Riley Baxter))
  178. [2017-08-22 03:54:51] [Output] : ★ wrench down. ((Riley Baxter))
  179. [2017-08-22 03:55:59] [Output] : ★ Riley Baxter lifts up the front wheel, rolling it to the side as she'd take her ratchet in hand.
  180. [2017-08-22 03:57:26] [Output] : ★ Riley Baxter finds her outer tie rod, pulling away the cotter pin, pressing her ratchet against the
  181. [2017-08-22 03:57:30] [Output] : ★ bottom of the tie rod. ((Riley Baxter))
  182. [2017-08-22 03:59:47] [Output] : ★ Riley Baxter begins untightening the bolt on the bottom of the tie rod, loosening off the nut.
  183. [2017-08-22 03:59:55] [Output] : ★ The nut would come free and Riley would set it down. ((Riley Baxter))
  184. [2017-08-22 04:02:48] [Output] : ★ Riley Baxter takes her hammer, bashing the tie rod lightly away.
  185. [2017-08-22 04:02:57] [Output] : ★ The outer tie rod would disconnect from the knuckle. ((Riley Baxter))
  186. [2017-08-22 04:03:10] [Output] : ★ Riley Baxter begins twisting the outer tie rod until she could free it, setting it down.
  187. [2017-08-22 04:04:11] [Output] : ★ Riley Baxter reaches in, grabbing her inner tie rod, twisting it away until she could pull it out.
  188. [2017-08-22 04:05:12] [Output] : ★ Riley Baxter disconnects the inner tie rod, pulling it away and out of the car.
  189. [2017-08-22 04:05:42] [Output] : ★ Riley Baxter picks out her new inner tie rod from the kit, moving it towards the steering rack,
  190. [2017-08-22 04:05:48] [Output] : ★ attempting to twist it into place. ((Riley Baxter))
  191. [2017-08-22 04:06:01] [Output] : ★ The inner tie rod would eventually move into position. ((Riley Baxter))
  192. [2017-08-22 04:07:17] [Output] : ★ Riley Baxter picks out her new outer tie rod end from the kit, lifting it and spinning it onto the inner
  193. [2017-08-22 04:07:19] [Output] : ★ tie rod. ((Riley Baxter))
  194. [2017-08-22 04:07:40] [Output] : ★ Riley Baxter picks up her hammer, bashing the outer tie rod end lightly into the knuckle.
  195. [2017-08-22 04:07:48] [Output] : ★ The Outer tie rod end would move back into the knuckle. ((Riley Baxter))
  196. [2017-08-22 04:08:09] [Output] : ★ Riley Baxter takes the nut from earlier and spins it onto the tie rod, picking the ratchet up and using
  197. [2017-08-22 04:09:53] [Output] : ★ it to tighten the nut onto the tie rod end. ((Riley Baxter))
  198. [2017-08-22 04:10:03] [Output] : ★ Riley Baxter slides the cotter pin back in to the tie rod end.
  199. [2017-08-22 04:15:02] [Output] : ★ Riley Baxter picks up her angle kit, walking over to the passenger side and setting the kit down, picking
  200. [2017-08-22 04:17:59] [Output] : ★ her torque wrench and beginning to untighten all five wheel nuts ((Riley Baxter))
  201. [2017-08-22 04:18:38] [Output] : ★ Riley would untighten all the wheel nuts with her torque wrench, setting the tool and bolts ((Riley Baxter))
  202. [2017-08-22 04:18:41] [Output] : ★ to the side. ((Riley Baxter))
  203. [2017-08-22 04:19:01] [Output] : ★ Riley Baxter picks up the front passenger side wheel, taking it off from the hub and rolling it aside.
  204. [2017-08-22 04:21:33] [Output] : ★ Riley Baxter picks up her ratchet, removing the cotter pin from the outer tie rod and pressing the end of
  205. [2017-08-22 04:22:06] [Output] : ★ the ratchet against the nut on the bottom of the outer tie rod, twisting to untighten. ((Riley Baxter))
  206. [2017-08-22 04:22:51] [Output] : ★ The outer tie rod nut would untighten and Riley would set the nut and tool down. ((Riley Baxter))
  207. [2017-08-22 04:23:53] [Output] : ★ Riley Baxter takes her hammer, lightly bashing the outer tie rod away from the knuckle.
  208. [2017-08-22 04:24:23] [Output] : ★ The outer tie rod would disconnect from the knuckle as Riley would bash it out. ((Riley Baxter))
  209. [2017-08-22 04:24:50] [Output] : ★ Riley Baxter grips onto the outer tie rod end, twisting it away from the inner tie rod end.
  210. [2017-08-22 04:25:32] [Output] : ★ The outer tie rod would disconnect from the inner tie rod and Riley would set it aside. ((Riley Baxter))
  211. [2017-08-22 04:26:07] [Output] : ★ Riley Baxter grips onto the inner tie rod, twisting it away from the steering rack, pulling it away and
  212. [2017-08-22 04:26:10] [Output] : ★ setting it down. ((Riley Baxter))
  213. [2017-08-22 04:27:58] [Output] : ★ Riley Baxter reaches into her angle kit, pulling out a new inner tie rod, moving it to the rack and
  214. [2017-08-22 04:28:03] [Output] : ★ spinning it into place. ((Riley Baxter))
  215. [2017-08-22 04:29:37] [Output] : ★ Riley Baxter takes her new outer tie rod end, moving it towards the inner tie rod, twisting it onto
  216. [2017-08-22 04:29:44] [Output] : ★ the end of the inner tie rod. ((Riley Baxter))
  217. [2017-08-22 04:29:59] [Output] : ★ Riley Baxter picks up her hammer, tapping the end of the outer tie rod into the knuckle.
  218. [2017-08-22 04:30:24] [Output] : ★ Riley Baxter takes the nut, spinning it onto the bottom of the tie rod.
  219. [2017-08-22 04:30:35] [Output] : ★ Riley Baxter takes her ratchet, beginning to tighten the nut to the end.
  220. [2017-08-22 04:31:21] [Output] : ★ Riley Baxter adds the cotter pin back into the outer tie rod, standing herself back up.
  221. [2017-08-22 17:57:15] [Output] : ★ Riley Baxter would pick her ratchet up, leaning into the engine bay and finding the first turbocharger.
  222. [2017-08-22 17:57:33] [Output] : ★ Riley Baxter presses her ratchet against the first turbocharger's bolts, beginning to systematically
  223. [2017-08-22 17:57:37] [Output] : ★ remove them with her tool. ((Riley Baxter))
  224. [2017-08-22 17:57:52] [Output] : ★ Riley would go around each bolt, untightening it with the ratchet, until she could remove ((Riley Baxter))
  225. [2017-08-22 17:58:04] [Output] : ★ all four bolts holding the first turbocharger to the manifold. ((Riley Baxter))
  226. [2017-08-22 17:58:22] [Output] : ★ Riley Baxter would find two bolts holding the turbocharger to the downpipe, using her tool to begin
  227. [2017-08-22 17:58:25] [Output] : ★ to remove them. ((Riley Baxter))
  228. [2017-08-22 17:58:40] [Output] : ★ Riley would remove the two remaining bolts, lifting the turbocharger up slightly. ((Riley Baxter))
  229. [2017-08-22 17:58:55] [Output] : ★ Riley Baxter removes the oil and water feed lines, pluggiing the ends with a rubber end.
  230. [2017-08-22 17:59:15] [Output] : ★ Riley Baxter sets the first turbocharger down, moving back to the engine bay and finding the second turbo
  231. [2017-08-22 17:59:55] [Output] : ★ Riley Baxter finds the four bolts holding the turbocharger to the manifold, using her ratchet to remove
  232. [2017-08-22 17:59:58] [Output] : ★ the bolts. ((Riley Baxter))
  233. [2017-08-22 18:00:21] [Output] : ★ Riley would go around each bolt indidually, untightening with the ratchet and pulling ((Riley Baxter))
  234. [2017-08-22 18:00:24] [Output] : ★ the bolts away, setting them down. ((Riley Baxter))
  235. [2017-08-22 18:00:39] [Output] : ★ Riley Baxter lifts the turbocharger slightly, disconnecting the oil and water feed lines, plugging the
  236. [2017-08-22 18:00:44] [Output] : ★ ends up to avoid spill. ((Riley Baxter))
  237. [2017-08-22 18:01:21] [Output] : ★ Riley Baxter sets the turbocharger down onto the ground.
  238. [2017-08-22 18:02:06] [Output] : - Leader Riley Baxter (Nachtfalke)
  239. [2017-08-22 18:02:42] [Output] : ★ Riley Baxter takes her ratchet in hand, finding the exhaust manifold, noting down all the bolts.
  240. [2017-08-22 18:03:00] [Output] : ★ Riley Baxter would use her ratchet in hand and begin to remove all the bolts holding the manifold in.
  241. [2017-08-22 18:03:36] [Output] : ★ Riley would go around each individual bolt, loosening and removing them with her ratchet ((Riley Baxter))
  242. [2017-08-22 18:03:46] [Output] : ★ until she'd be able to pull the manifold away, setting it down. ((Riley Baxter))
  243. [2017-08-22 18:06:00] [Output] : ★ Riley Baxter reaches down to the parts on the ground, finding her new manifold out and lifting it up
  244. [2017-08-22 18:06:45] [Output] : ★ Riley Baxter sets it against the block, using her hands to thread in all the remaining bolts.
  245. [2017-08-22 18:06:59] [Output] : ★ Riley Baxter picks her ratchet back up, using it to retighten all the bolts holding the manifold to the
  246. [2017-08-22 18:07:01] [Output] : ★ block. ((Riley Baxter))
  247. [2017-08-22 18:07:17] [Output] : ★ Riley would go around each bolt and use the ratchet to tighten them all until the new ((Riley Baxter))
  248. [2017-08-22 18:07:23] [Output] : ★ manifold was in place securely. ((Riley Baxter))
  249. [2017-08-22 18:08:54] [Output] : ★ Riley Baxter turns around, leaning down to her parts once more, finding out her new turbocharger from the
  250. [2017-08-22 18:09:07] [Output] : ★ kit, lifting it up and setting it down on top of the manifold, threading the bolts in by han ((Riley Baxter))
  251. [2017-08-22 18:09:27] [Output] : ★ Riley Baxter would take her ratchet, beginning to tighten up all four bolts holding the turbocharger to
  252. [2017-08-22 18:09:33] [Output] : ★ the manifold. ((Riley Baxter))
  253. [2017-08-22 18:09:53] [Output] : ★ Riley would go around each individual bolt, using her ratchet to securely tighten them ((Riley Baxter))
  254. [2017-08-22 18:10:08] [Output] : ★ Until the turbocharger would sit firmly on top of the exhaust manifold. ((Riley Baxter))
  255. [2017-08-22 18:10:30] [Output] : ★ Riley Baxter takes her ratchet in hand, leaning out of the engine bay and lowering herself down underneat
  256. [2017-08-22 18:10:37] [Output] : ★ the car, finding the bottom of the downpipe. ((Riley Baxter))
  257. [2017-08-22 18:10:50] [Output] : ★ Riley Baxter would notice two bolts, raising her ratchet and beginning to untighten them.
  258. [2017-08-22 18:11:08] [Output] : ★ Riley would untighten both bolts, using the ratchet, before gripping and lowering the ((Riley Baxter))
  259. [2017-08-22 18:11:12] [Output] : ★ downpipe out of the car. ((Riley Baxter))
  260. [2017-08-22 18:11:31] [Output] : ★ Riley Baxter sets the old downpipe down onto the ground, picking up the new downpipe and lifting it upwar
  261. [2017-08-22 18:11:56] [Output] : ★ Riley Baxter would set the bottom of the downpipe against the exhaust system and loosely
  262. [2017-08-22 18:11:59] [Output] : ★ thread in two bolts. ((Riley Baxter))
  263. [2017-08-22 18:12:17] [Output] : ★ Riley Baxter moves back out from under the car, moving herself to the engine bay and finding the top
  264. [2017-08-22 18:13:06] [Output] : ★ of the downpipe, threading two bolts through the turbocharger with a free hand. ((Riley Baxter))
  265. [2017-08-22 18:13:19] [Output] : ★ Riley Baxter takes her ratchet in hand, beginning to tighten the two bolts.
  266. [2017-08-22 18:13:33] [Output] : ★ The two bolts would tighten as Riley would use the tool, holding the turbocharger and ((Riley Baxter))
  267. [2017-08-22 18:13:36] [Output] : ★ downpipe together. ((Riley Baxter))
  268. [2017-08-22 18:13:53] [Output] : ★ While Riley was there, she would reconnect the oil and water feed lines to the new turbo. ((Riley Baxter))
  269. [2017-08-22 18:15:00] [Output] : ★ Riley Baxter leans herself under the car once more, taking out her phone and switching the torch on.
  270. [2017-08-22 18:15:18] [Output] : ★ Riley Baxter would find the o2 sensor in the exhaust system, twisting and removing it.
  271. [2017-08-22 18:15:35] [Output] : ★ Riley Baxter would turn the torch off of her phone, moving it back into her pocket.
  272. [2017-08-22 18:16:00] [Output] : ★ Riley Baxter picks her ratchet back up, finding the two bolts holding the exhaust pipe to the back of the
  273. [2017-08-22 18:16:10] [Output] : ★ catalytic convertor, beginning to remove them. ((Riley Baxter))
  274. [2017-08-22 18:16:26] [Output] : ★ Riley would use the ratchet to remove the two bolts, before lifting the pipe from its hangar ((Riley Baxter))
  275. [2017-08-22 18:16:31] [Output] : ★ and setting it onto the ground. ((Riley Baxter))
  276. [2017-08-22 18:17:47] [Output] : ★ Riley Baxter would now find the catalytic convertor, starting to untighten the two bolts holding the
  277. [2017-08-22 18:17:53] [Output] : ★ convertor to the extension pipe. ((Riley Baxter))
  278. [2017-08-22 18:18:07] [Output] : ★ Riley would use the ratchet to remove both bolts until she could free it from the car, ((Riley Baxter))
  279. [2017-08-22 18:18:17] [Output] : ★ lifting it from the hangars and setting it down. ((Riley Baxter))
  280. [2017-08-22 18:20:56] [Output] : ★ Riley Baxter would stand back up, leaning under the car and finding the extension pipe once more, finding
  281. [2017-08-22 18:21:08] [Output] : ★ the remaining two bolts holding it to the muffler and beginning to remove them. ((Riley Baxter))
  282. [2017-08-22 18:22:08] [Output] : ★ Resonator* ((Riley Baxter))
  283. [2017-08-22 18:22:44] [Output] : ★ Riley would use the ratchet to remove the two bolts until she could lift the extension pipe, ((Riley Baxter))
  284. [2017-08-22 18:23:01] [Output] : ★ Removing it from it's hangars and setting it onto the ground. ((Riley Baxter))
  285. [2017-08-22 18:25:51] [Output] : ★ Riley Baxter would move herself back up underneath the car, finding the resonator, and two bolts connecti
  286. [2017-08-22 18:25:58] [Output] : ★ it to the remaining exhaust components. ((Riley Baxter))
  287. [2017-08-22 18:26:39] [Output] : ★ Riley Baxter begins removing the two bolts holding it into place, using the ratchet to do so.
  288. [2017-08-22 18:27:03] [Output] : ★ Riley would begin to remove the bolts with the ratchet until she could lift the resonator ((Riley Baxter))
  289. [2017-08-22 18:27:11] [Output] : ★ from it's hangars, setting it down onto the ground. ((Riley Baxter))
  290. [2017-08-22 18:27:39] [Output] : ★ Riley Baxter moves her hands up to the tailpipe, gripping it and pulling it from the hangars, setting
  291. [2017-08-22 18:27:43] [Output] : ★ it onto the ground once more. ((Riley Baxter))
  292. [2017-08-22 18:35:40] [Output] : ★ Riley Baxter would move herself to her parts, finding out the first pipe, standing herself back up and
  293. [2017-08-22 18:36:04] [Output] : ★ attaching it to the hangars, pushing it into the downpipe and securing it by threading two ((Riley Baxter))
  294. [2017-08-22 18:36:07] [Output] : ★ bolts in. ((Riley Baxter))
  295. [2017-08-22 18:36:21] [Output] : ★ Riley Baxter picks her ratchet up, using it to begin tightening the two bolts.
  296. [2017-08-22 18:41:37] [Output] : ★ Riley would use the tool to tighten the pipe to the bottom of the downpipe until it sat ((Riley Baxter))
  297. [2017-08-22 18:41:41] [Output] : ★ securely in position. ((Riley Baxter))
  298. [2017-08-22 18:43:11] [Output] : ★ Riley Baxter would reattach the o2 sensor to the exhaust system, tightening it into position.
  299. [2017-08-22 19:08:59] [Output] : ★ Riley Baxter leans down to her catalytic convertor, lifting it up and aligning it against the new piping,
  300. [2017-08-22 19:09:21] [Output] : ★ threading two bolts through to keep it secure, picking her ratchet up. ((Riley Baxter))
  301. [2017-08-22 19:09:30] [Output] : ★ Riley Baxter begins tightening the two bolts using the ratchet.
  302. [2017-08-22 19:10:35] [Output] : ★ Riley would tighten the two bolts, moving the convertor onto it's hangars. ((Riley Baxter))
  303. [2017-08-22 19:10:48] [Output] : ★ Riley Baxter leans down, picking up the extension pipe from her kit next.
  304. [2017-08-22 19:11:02] [Output] : ★ Riley Baxter lifts it up, placing it agaisnt the convertor, and hooking the hangars to the chassis.
  305. [2017-08-22 19:11:14] [Output] : ★ Riley Baxter threads two bolts into position, using her ratchet to tighten them.
  306. [2017-08-22 19:11:31] [Output] : ★ The two bolts would tighten as Riley used the ratchet, securing the convertor to the ((Riley Baxter))
  307. [2017-08-22 19:11:35] [Output] : ★ extension pipe. ((Riley Baxter))
  308. [2017-08-22 19:13:04] [Output] : ★ Riley Baxter reaches back down to her exhaust kit, picking out her resonator next, lifting it up
  309. [2017-08-22 19:13:17] [Output] : ★ into it's position and hooking the hangars to the chassis, threading two bolts through ((Riley Baxter))
  310. [2017-08-22 19:13:30] [Output] : ★ the resonator and extension pipe to keep it secure. ((Riley Baxter))
  311. [2017-08-22 19:13:33] [Output] : - Leader Riley Baxter (Nachtfalke)
  312. [2017-08-22 19:18:49] [Output] : ★ Riley Baxter moves herself back down her parts, picking out the tailpipe next.
  313. [2017-08-22 19:23:27] [Output] : - Leader Riley Baxter (Nachtfalke)
  314. [2017-08-22 19:25:10] [Output] : ★ Riley Baxter lifts the tailpipe to the bottom of the car, attaching the hangars and pressing it
  315. [2017-08-22 19:25:14] [Output] : ★ against the resonator box. ((Riley Baxter))
  316. [2017-08-22 19:25:30] [Output] : ★ Riley Baxter threads two bolts in to keep it secure, using her ratchet to tighten it.
  317. [2017-08-22 19:25:48] [Output] : ★ The two bolts would tighten as Riley would use the tool, securing the resonator to the ((Riley Baxter))
  318. [2017-08-22 19:25:51] [Output] : ★ tailpipe. ((Riley Baxter))
  319. [2017-08-22 19:28:40] [Output] : ★ Riley Baxter finally lifts the mufflier from her kit, attaching it to the tailpipe and threading two bolt
  320. [2017-08-22 19:28:49] [Output] : ★ through, tightening it with the ratchet. ((Riley Baxter))
  321. [2017-08-22 19:29:02] [Output] : ★ Riley would tighten the two bolts until the muffler would be held securely in place. ((Riley Baxter))
  322. [2017-08-22 19:30:16] [Output] : ★ Riley Baxter steps out from the car, taking some time to clean all the rest of the parts up.
  323. [2017-08-22 19:30:50] [Output] : ★ Riley Baxter walks back to her ramp controls, unlocking and lowering the center rails.
  324. [2017-08-22 19:31:00] [Output] : ★ The car would lower back down onto it's wheels. ((Riley Baxter))
  325. [2017-08-22 19:31:17] [Output] : ★ Riley Baxter opens the drivers side door, switching the keys and beginning to pull off the lift.
  326. [2017-08-22 19:31:28] [Output] : ★ Riley Baxter drives over to the rolling road, parking her rear wheels up onto it.
  327. [2017-08-22 19:31:45] [Output] : ★ Riley Baxter steps out of the car, walking around the car and securing it into place, making sure
  328. [2017-08-22 19:31:53] [Output] : ★ none of the restraints would have slack. ((Riley Baxter))
  329. [2017-08-22 19:31:59] [Output] : - Leader Riley Baxter (Nachtfalke)
  330. [2017-08-22 19:34:16] [Output] : ★ Riley Baxter wheels over a large industrial fan, placing it in front of the car, and walking over to the
  331. [2017-08-22 19:34:31] [Output] : ★ rear, placing an extraction pipe over the exhaust. ((Riley Baxter))
  332. [2017-08-22 19:34:46] [Output] : ★ Riley Baxter takes a laptop from nearby, powering it on and sitting herself down into the drivers seat.
  333. [2017-08-22 19:35:08] [Output] : ★ Riley Baxter takes a wire, plugging one end from the laptop into the OBD port of the E92.
  334. [2017-08-22 19:35:19] [Output] : ★ Riley Baxter loads up a program, beginning to flash the ECU.
  335. [2017-08-22 19:35:25] [Output] : ★ Loading 24% ((Riley Baxter))
  336. [2017-08-22 19:35:30] [Output] : ★ Loading 57% ((Riley Baxter))
  337. [2017-08-22 19:35:36] [Output] : ★ Loading 86% ((Riley Baxter))
  338. [2017-08-22 19:35:41] [Output] : ★ Complete! ((Riley Baxter))
  339. [2017-08-22 19:36:00] [Output] : ★ Riley Baxter would begin editing the air/fuel ratio to compensate for the new turbocharger,
  340. [2017-08-22 19:36:16] [Output] : ★ taking a look at all the other options, systematically setting them. ((Riley Baxter))
  341. [2017-08-22 19:36:46] [Output] : ★ Riley Baxter would derestrict the vehicle, disabling any ecosystems in the vehicle.
  342. [2017-08-22 19:36:56] [Output] : ★ Riley Baxter would save and reflash the ECU.
  343. [2017-08-22 19:37:03] [Output] : ★ Loading 12% ((Riley Baxter))
  344. [2017-08-22 19:37:06] [Output] : ★ Loading 33% ((Riley Baxter))
  345. [2017-08-22 19:37:12] [Output] : ★ Loading 49% ((Riley Baxter))
  346. [2017-08-22 19:37:18] [Output] : ★ Loading 73% ((Riley Baxter))
  347. [2017-08-22 19:37:24] [Output] : ★ Loading 86% ((Riley Baxter))
  348. [2017-08-22 19:37:29] [Output] : ★ Do Complete! ((Riley Baxter))
  349. [2017-08-22 19:37:49] [Output] : ★ Riley Baxter would switch the engine back on, beginning a dyno run.
  350. [2017-08-22 19:38:06] [Output] : ★ Riley Baxter would slowly raise the RPM's, slowly getting higher before a redline, slowing the
  351. [2017-08-22 19:38:09] [Output] : ★ car down once more. ((Riley Baxter))
  352. [2017-08-22 19:38:25] [Output] : ★ Riley Baxter would look at her new figures, opening the laptop back up and making a few more tweaks.
  353. [2017-08-22 19:38:42] [Output] : ★ once happy, Riley would save and reflash the ECU, disconnecting the laptop from it. ((Riley Baxter))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!