API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 6th, 2022
276
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 49.26 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.06.15 09:55:23 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3.  
  4. ===================================================================
  5.  
  6. MT7621 stage1 code 10:33:11 (ASIC)
  7.  
  8. CPU=50000000 HZ BUS=12500000 HZ
  9.  
  10. ==================================================================
  11.  
  12. Change MPLL source from XTAL to CR...
  13.  
  14. do MEMPLL setting..
  15.  
  16. MEMPLL Config : 0x21100000
  17.  
  18. 3PLL mode + External loopback
  19.  
  20. === XTAL-40Mhz === DDR-1066Mhz ===
  21.  
  22. PLL3 FB_DL: 0xb, 1/0 = 513/511 2D000000
  23.  
  24. PLL2 FB_DL: 0x10, 1/0 = 518/506 41000000
  25.  
  26. PLL4 FB_DL: 0x13, 1/0 = 523/501 4D000000
  27.  
  28. do DDR setting..[00320381]
  29.  
  30. Apply DDR3 Setting...(use customer AC)
  31.  
  32. 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
  33.  
  34. --------------------------------------------------------------------------------
  35.  
  36. 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  37.  
  38. 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  39.  
  40. 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  41.  
  42. 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  43.  
  44. 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  45.  
  46. 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  47.  
  48. 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  49.  
  50. 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  51.  
  52. 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  53.  
  54. 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  55.  
  56. 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  57.  
  58. 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  59.  
  60. 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  61.  
  62. 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
  63.  
  64. 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
  65.  
  66. 000F:| 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0
  67.  
  68. 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
  69.  
  70. 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  71.  
  72. 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  73.  
  74. 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  75.  
  76. 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  77.  
  78. 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  79.  
  80. 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  81.  
  82. 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  83.  
  84. 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  85.  
  86. 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  87.  
  88. 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  89.  
  90. 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  91.  
  92. 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  93.  
  94. 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  95.  
  96. 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  97.  
  98. 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  99.  
  100. rank 0 coarse = 15
  101.  
  102. rank 0 fine = 64
  103.  
  104. B:| 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0
  105.  
  106. opt_dle value:10
  107.  
  108. DRAMC_R0DELDLY[018]=00002625
  109.  
  110. ==================================================================
  111.  
  112. RX DQS perbit delay software calibration
  113.  
  114. ==================================================================
  115.  
  116. 1.0-15 bit dq delay value
  117.  
  118. ==================================================================
  119.  
  120. bit| 0 1 2 3 4 5 6 7 8 9
  121.  
  122. --------------------------------------
  123.  
  124. 0 | 14 9 15 13 15 11 15 10 11 10
  125.  
  126. 10 | 13 11 9 13 11 11
  127.  
  128. --------------------------------------
  129.  
  130.  
  131.  
  132. ==================================================================
  133.  
  134. 2.dqs window
  135.  
  136. x=pass dqs delay value (min~max)center
  137.  
  138. y=0-7bit DQ of every group
  139.  
  140. input delay:DQS0 =37 DQS1 = 38
  141.  
  142. ==================================================================
  143.  
  144. bit DQS0 bit DQS1
  145.  
  146. 0 (1~73)37 8 (2~70)36
  147.  
  148. 1 (0~70)35 9 (1~71)36
  149.  
  150. 2 (1~73)37 10 (3~72)37
  151.  
  152. 3 (1~73)37 11 (1~71)36
  153.  
  154. 4 (1~73)37 12 (1~70)35
  155.  
  156. 5 (1~72)36 13 (2~74)38
  157.  
  158. 6 (0~72)36 14 (2~73)37
  159.  
  160. 7 (1~70)35 15 (2~70)36
  161.  
  162. ==================================================================
  163.  
  164. 3.dq delay value last
  165.  
  166. ==================================================================
  167.  
  168. bit| 0 1 2 3 4 5 6 7 8 9
  169.  
  170. --------------------------------------
  171.  
  172. 0 | 14 11 15 13 15 12 15 12 13 12
  173.  
  174. 10 | 14 13 12 13 12 13
  175.  
  176. ==================================================================
  177.  
  178. ==================================================================
  179.  
  180. TX perbyte calibration
  181.  
  182. ==================================================================
  183.  
  184. DQS loop = 15, cmp_err_1 = ffff0000
  185.  
  186. dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
  187.  
  188. dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
  189.  
  190. DQ loop=15, cmp_err_1 = ffff0000
  191.  
  192. dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
  193.  
  194. dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
  195.  
  196. byte:0, (DQS,DQ)=(8,8)
  197.  
  198. byte:1, (DQS,DQ)=(8,8)
  199.  
  200. 20,data:88
  201.  
  202. [EMI] DRAMC calibration passed
  203.  
  204.  
  205.  
  206.  
  207. ===================================================================
  208.  
  209. MT7621 stage1 code done
  210.  
  211. CPU=50000000 HZ BUS=12500000 HZ
  212.  
  213. ===================================================================
  214.  
  215.  
  216.  
  217. U-Boot 1.1.3 (Nov 11 2021 - 19:30:41)
  218.  
  219.  
  220. Board: Ralink APSoC DRAM: 128 MB
  221.  
  222. relocate_code Pointer at: 87f94000
  223.  
  224.  
  225. Config XHCI 40M PLL
  226.  
  227. ***************************
  228.  
  229. hardware power up
  230.  
  231. ***************************
  232.  
  233. Allocate 16 byte aligned buffer: 87fc8530
  234.  
  235. Enable NFI Clock
  236.  
  237. # MTK NAND # : Use HW ECC
  238.  
  239. NAND ID [01 F1 80 1D 01]
  240.  
  241. Device found in MTK table, ID: 1f1, EXT_ID: 801d01
  242.  
  243. Support this Device in MTK table! 1f1
  244.  
  245. select_chip
  246.  
  247. [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  248.  
  249. Signature matched and data read!
  250.  
  251. load_fact_bbt success 1023
  252.  
  253. load fact bbt success
  254.  
  255. [mtk_nand] probe successfully!
  256.  
  257. mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
  258.  
  259. [U]: in env check
  260.  
  261. ...============================================
  262.  
  263. Ralink UBoot Version: 5.0.0.0
  264.  
  265. --------------------------------------------
  266.  
  267. ASIC MT7621A DualCore (MAC to MT7530 Mode)
  268.  
  269. DRAM_CONF_FROM: Auto-Detection
  270.  
  271. DRAM_TYPE: DDR3
  272.  
  273. DRAM bus: 16 bit
  274.  
  275. Xtal Mode=3 OCP Ratio=1/4
  276.  
  277. Flash component: NAND Flash
  278.  
  279. Date:Nov 11 2021 Time:19:30:41
  280.  
  281. ============================================
  282.  
  283. icache: sets:256, ways:4, linesz:32 ,total:32768
  284.  
  285. dcache: sets:256, ways:4, linesz:32 ,total:32768
  286.  
  287.  
  288. ##### The CPU freq = 880 MHZ ####
  289.  
  290. estimate memory size =128 Mbytes
  291.  
  292. #Reset_MT7530
  293.  
  294. set LAN/WAN LLLLW
  295.  
  296. [u]ofs = 0x00000000
  297.  
  298. [u]size = 0x00000000
  299.  
  300. REG: MEMO2 value = 0x00000000
  301.  
  302.  
  303. Please choose the operation:
  304.  
  305. 1: Load system code to SDRAM via TFTP.
  306.  
  307. 2: Load system code then write to Flash via TFTP.
  308.  
  309. 3: Boot system code via Flash (default).
  310.  
  311. 4: Entr boot command line interface.
  312.  
  313. 7: Load Boot Loader code then write to Flash via Serial.
  314.  
  315. 9: Load Boot Loader code then write to Flash via TFTP.
  316.  
  317. default: 3
  318.  
  319.  0
  320.  
  321. restore key unpress
  322.  
  323. BootType = 3
  324.  
  325.  
  326.  
  327. 3: System Boot system code via Flash.
  328.  
  329. ## Booting image at be800000 ...
  330.  
  331. Image Name: MIPS OpenWrt Linux-3.10.108
  332.  
  333. Image Type: MIPS Linux Kernel Image (lzma compressed)
  334.  
  335. Data Size: 1666492 Bytes = 1.6 MB
  336.  
  337. Load Address: 81001000
  338.  
  339. Entry Point: 81001000
  340.  
  341. .......................... Verifying Checksum ... OK
  342.  
  343. Uncompressing Kernel Image ... OK
  344.  
  345. No initrd
  346.  
  347. ## Transferring control to Linux (at address 81001000) ...
  348.  
  349. ## Giving linux memsize in MB, 128
  350.  
  351.  
  352. Starting kernel ...
  353.  
  354.  
  355.  
  356. LINUX started...
  357.  
  358. THIS IS ASIC
  359.  
  360. SDK 5.0.S.0
  361. [ 0.000000] Linux version 3.10.108 (jenkins@wh-cis01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #1 SMP Thu Nov 11 19:35:07 CST 2021
  362. [ 0.000000]
  363. [ 0.000000] The CPU feqenuce set to 880 MHz
  364. [ 0.000000] GCMP present
  365. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  366. [ 0.000000] Software DMA cache coherency
  367. [ 0.000000] Determined physical RAM map:
  368. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  369. [ 0.000000] Initrd not found or empty - disabling initrd
  370. [ 0.000000] Zone ranges:
  371. [ 0.000000] DMA [mem 0x00000000-0x00ffffff]
  372. [ 0.000000] Normal [mem 0x01000000-0x07ffffff]
  373. [ 0.000000] Movable zone start for each node
  374. [ 0.000000] Early memory node ranges
  375. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  376. [ 0.000000] Detected 3 available secondary CPU(s)
  377. [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  378. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  379. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  380. [ 0.000000] PERCPU: Embedded 7 pages/cpu @815e2000 s6464 r8192 d14016 u32768
  381. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  382. [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock6 rootfstype=squashfs,jffs2
  383. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  384. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  385. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  386. [ 0.000000] Writing ErrCtl register=0005048b
  387. [ 0.000000] Readback ErrCtl register=0005048b
  388. [ 0.000000] Memory: 124824k/131072k available (3722k kernel code, 6248k reserved, 887k data, 248k init, 0k highmem)
  389. [ 0.000000] Hierarchical RCU implementation.
  390. [ 0.000000] NR_IRQS:128
  391. [ 0.000000] console [ttyS1] enabled
  392. [ 0.120000] Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
  393. [ 0.160000] pid_max: default: 32768 minimum: 301
  394. [ 0.164000] Mount-cache hash table entries: 512
  395. [ 0.168000] launch: starting cpu1
  396. [ 0.172000] launch: cpu1 gone!
  397. [ 0.172000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  398. [ 0.172000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  399. [ 0.172000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  400. [ 0.172000] CPU1 revision is: 0001992f (MIPS 1004Kc)
  401. [ 0.204000] Synchronize counters for CPU 1: done.
  402. [ 0.208000] launch: starting cpu2
  403. [ 0.212000] launch: cpu2 gone!
  404. [ 0.212000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  405. [ 0.212000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  406. [ 0.212000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  407. [ 0.212000] CPU2 revision is: 0001992f (MIPS 1004Kc)
  408. [ 0.244000] Synchronize counters for CPU 2: done.
  409. [ 0.248000] launch: starting cpu3
  410. [ 0.252000] launch: cpu3 gone!
  411. [ 0.252000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  412. [ 0.252000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  413. [ 0.252000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  414. [ 0.252000] CPU3 revision is: 0001992f (MIPS 1004Kc)
  415. [ 0.280000] Synchronize counters for CPU 3: done.
  416. [ 0.284000] Brought up 4 CPUs
  417. [ 0.288000] NET: Registered protocol family 16
  418. [ 0.292000] release PCIe RST: RALINK_RSTCTRL = 7000000
  419. [ 0.296000] PCIE PHY initialize
  420. [ 0.300000] ***** Xtal 40MHz *****
  421. [ 0.304000] start MT7621 PCIe register access
  422. [ 0.308000] RALINK_PCI_PCICFG_ADDR= 21007f2
  423. [ 0.312000] RALINK_PCI_PCICFG_ADDR = 21007f0
  424. [ 0.808000] RALINK_RSTCTRL = 7000000
  425. [ 0.812000] RALINK_CLKCFG1 = 77ffeff8
  426. [ 0.816000]
  427. [ 0.816000] *************** MT7621 PCIe RC mode *************
  428. [ 1.312000] PCIE2 no card, disable it(RST&CLK)
  429. [ 1.316000] pcie_link status = 0x3
  430. [ 1.320000] RALINK_RSTCTRL= 3000000
  431. [ 1.324000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
  432. [ 1.328000] RALINK_PCI_PCICFG_ADDR = 21007f0 -> 21007f0
  433. [ 1.332000] PCIE0 enabled
  434. [ 1.336000] PCIE1 enabled
  435. [ 1.340000] interrupt enable status: 300000
  436. [ 1.344000] Port 1 N_FTS = 1b105000
  437. [ 1.348000] Port 0 N_FTS = 1b105000
  438. [ 1.352000] config reg done
  439. [ 1.356000] init_rt2880pci done
  440. [ 1.376000] bio: create slab <bio-0> at 0
  441. [ 1.380000] Module notion_dbg has been initialized.
  442. [ 1.384000] vgaarb: loaded
  443. [ 1.388000] PCI host bridge to bus 0000:00
  444. [ 1.392000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  445. [ 1.396000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
  446. [ 1.400000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  447. [ 1.404000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  448. [ 1.408000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  449. [ 1.412000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
  450. [ 1.416000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
  451. [ 1.420000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  452. [ 1.424000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref]
  453. [ 1.428000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
  454. [ 1.432000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
  455. [ 1.436000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
  456. [ 1.440000] pci 0000:00:00.0: PCI bridge to [bus 01]
  457. [ 1.444000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
  458. [ 1.448000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit pref]
  459. [ 1.452000] pci 0000:02:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bit pref]
  460. [ 1.456000] pci 0000:02:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bit pref]
  461. [ 1.460000] pci 0000:00:01.0: PCI bridge to [bus 02]
  462. [ 1.464000] pci 0000:00:01.0: bridge window [mem 0x60100000-0x602fffff pref]
  463. [ 1.468000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
  464. [ 1.472000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
  465. [ 1.476000] BAR0 at slot 0 = 0
  466. [ 1.480000] bus=0x0, slot = 0x0
  467. [ 1.484000] res[0]->start = 0
  468. [ 1.488000] res[0]->end = 0
  469. [ 1.492000] res[1]->start = 60300000
  470. [ 1.496000] res[1]->end = 6030ffff
  471. [ 1.500000] res[2]->start = 0
  472. [ 1.504000] res[2]->end = 0
  473. [ 1.508000] res[3]->start = 0
  474. [ 1.512000] res[3]->end = 0
  475. [ 1.516000] res[4]->start = 0
  476. [ 1.520000] res[4]->end = 0
  477. [ 1.524000] res[5]->start = 0
  478. [ 1.528000] res[5]->end = 0
  479. [ 1.532000] BAR0 at slot 1 = 0
  480. [ 1.536000] bus=0x0, slot = 0x1
  481. [ 1.540000] res[0]->start = 0
  482. [ 1.544000] res[0]->end = 0
  483. [ 1.548000] res[1]->start = 60310000
  484. [ 1.552000] res[1]->end = 6031ffff
  485. [ 1.556000] res[2]->start = 0
  486. [ 1.560000] res[2]->end = 0
  487. [ 1.564000] res[3]->start = 0
  488. [ 1.568000] res[3]->end = 0
  489. [ 1.572000] res[4]->start = 0
  490. [ 1.576000] res[4]->end = 0
  491. [ 1.580000] res[5]->start = 0
  492. [ 1.584000] res[5]->end = 0
  493. [ 1.588000] bus=0x1, slot = 0x0, irq=0x4
  494. [ 1.592000] res[0]->start = 60000000
  495. [ 1.596000] res[0]->end = 600fffff
  496. [ 1.600000] res[1]->start = 0
  497. [ 1.604000] res[1]->end = 0
  498. [ 1.608000] res[2]->start = 0
  499. [ 1.612000] res[2]->end = 0
  500. [ 1.616000] res[3]->start = 0
  501. [ 1.620000] res[3]->end = 0
  502. [ 1.624000] res[4]->start = 0
  503. [ 1.628000] res[4]->end = 0
  504. [ 1.632000] res[5]->start = 0
  505. [ 1.636000] res[5]->end = 0
  506. [ 1.640000] bus=0x2, slot = 0x1, irq=0x18
  507. [ 1.644000] res[0]->start = 60100000
  508. [ 1.648000] res[0]->end = 601fffff
  509. [ 1.652000] res[1]->start = 0
  510. [ 1.656000] res[1]->end = 0
  511. [ 1.660000] res[2]->start = 60200000
  512. [ 1.664000] res[2]->end = 60203fff
  513. [ 1.668000] res[3]->start = 0
  514. [ 1.672000] res[3]->end = 0
  515. [ 1.676000] res[4]->start = 60204000
  516. [ 1.680000] res[4]->end = 60204fff
  517. [ 1.684000] res[5]->start = 0
  518. [ 1.688000] res[5]->end = 0
  519. [ 1.692000] Switching to clocksource Ralink Systick timer
  520. [ 1.696000] NET: Registered protocol family 2
  521. [ 1.704000] Clockevents: could not switch to one-shot mode:
  522. [ 1.704000] Clockevents: could not switch to one-shot mode:
  523. [ 1.704000] Clockevents: could not switch to one-shot mode:
  524. [ 1.704000] MIPS is not functional.
  525. [ 1.704000] MIPS is not functional.
  526. [ 1.704000] Clockevents: could not switch to one-shot mode: MIPS is not functional.
  527. [ 1.704000] Could not switch to high resolution mode on CPU 0
  528. [ 1.704000] Could not switch to high resolution mode on CPU 3
  529. [ 1.704000] Could not switch to high resolution mode on CPU 2
  530. [ 1.800000] MIPS is not functional.
  531. [ 1.808000] Could not switch to high resolution mode on CPU 1
  532. [ 1.820000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  533. [ 1.836000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  534. [ 1.848000] TCP: Hash tables configured (established 1024 bind 1024)
  535. [ 1.860000] TCP: reno registered
  536. [ 1.868000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  537. [ 1.880000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  538. [ 1.892000] NET: Registered protocol family 1
  539. [ 1.988000] 4 CPUs re-calibrate udelay(lpj = 1167360)
  540. [ 2.000000] MTK/Ralink keys init.
  541. [ 2.008000] MTK/Ralink leds init.
  542. [ 2.016000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  543. [ 2.028000] jffs2: version 2.2. (NAND) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  544. [ 2.048000] io scheduler noop registered (default)
  545. [ 2.056000] reg_int_mask=0, INT_MASK= 0
  546. [ 2.064000] HSDMA_init
  547. [ 2.068000]
  548. [ 2.068000] hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000
  549. [ 2.088000]
  550. [ 2.088000] hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000
  551. [ 2.104000] TX_CTX_IDX0 = 0
  552. [ 2.108000] TX_DTX_IDX0 = 0
  553. [ 2.112000] RX_CRX_IDX0 = 3ff
  554. [ 2.120000] RX_DRX_IDX0 = 0
  555. [ 2.124000] set_fe_HSDMA_glo_cfg
  556. [ 2.132000] HSDMA_GLO_CFG = 465
  557. [ 2.144000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  558. [ 2.156000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
  559. [ 2.168000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
  560. [ 2.188000] Ralink gpio driver initialized
  561. [ 2.196000] Enable Ralink GDMA Controller Module
  562. [ 2.204000] GDMA IP Version=3
  563. [ 2.212000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  564. [ 2.224000] Allocate 16 byte aligned buffer: 814d32e0
  565. [ 2.236000] Enable NFI Clock
  566. [ 2.240000] # MTK NAND # : Use HW ECC
  567. [ 2.248000] NAND ID [01 F1 80 1D 01, 00801d01]
  568. [ 2.256000] Device found in MTK table, ID: 1f1, EXT_ID: 801d01
  569. [ 2.268000] Support this Device in MTK table! 1f1
  570.  
  571. [ 2.276000] NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  572. [ 2.304000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  573. [ 2.316000] Scanning device for bad blocks
  574. [ 2.612000] Signature matched and data read!
  575. [ 2.620000] load_fact_bbt success 1023
  576. [ 2.628000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  577. [ 2.648000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  578. [ 2.668000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  579. [ 2.688000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  580. [ 2.708000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  581. [ 2.728000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  582. [ 2.748000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  583. [ 2.768000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  584. [ 2.788000] Creating 8 MTD partitions on "MT7621-NAND":
  585. [ 2.796000] 0x000000000000-0x000007f80000 : "ALL"
  586. [ 2.840000] 0x000000000000-0x000000080000 : "Bootloader"
  587. [ 2.852000] 0x000000080000-0x000000100000 : "Config"
  588. [ 2.864000] 0x000000100000-0x000000140000 : "Factory"
  589. [ 2.876000] 0x000000140000-0x000002800000 : "firmware1"
  590. [ 2.896000] 0x000002800000-0x000004ec0000 : "firmware2"
  591. [ 2.920000] 0x000002996dfc-0x000004ec0000 : "rootfs"
  592. [ 2.932000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  593. [ 2.976000] mtd: partition "rootfs_data" created automatically, ofs=0x3180000, len=0x1d40000
  594. [ 2.992000] 0x000003180000-0x000004ec0000 : "rootfs_data"
  595. [ 3.012000] 0x000004ec0000-0x000007f00000 : "ota"
  596. [ 3.036000] 0x000007f00000-0x000007f80000 : "Configbak"
  597. [ 3.048000] [mtk_nand] probe successfully!
  598. [ 3.056000] rootfs = 2996dfc to 3180000
  599. [ 3.064000] GMAC1_MAC_ADRH -- : 0x0000000c
  600. [ 3.072000] GMAC1_MAC_ADRL -- : 0x43288024
  601. [ 3.080000] Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
  602. [ 3.100000] GMAC1_MAC_ADRH -- : 0x0000000c
  603. [ 3.108000] GMAC1_MAC_ADRL -- : 0x4328800e
  604. [ 3.116000] PROC INIT OK!
  605. [ 3.124000] mt_msdc_init: !!!!! SDXC Module Initialize Fail !!!!!
  606. [ 3.136000] logger: created 256K log 'log_main'
  607. [ 3.144000] logger: created 256K log 'log_events'
  608. [ 3.156000] logger: created 256K log 'log_radio'
  609. [ 3.164000] logger: created 256K log 'log_system'
  610. [ 3.172000] arp_tables: (C) 2002 David S. Miller
  611. [ 3.184000] TCP: cubic registered
  612. [ 3.188000] NET: Registered protocol family 10
  613. [ 3.200000] sit: IPv6 over IPv4 tunneling driver
  614. [ 3.212000] NET: Registered protocol family 17
  615. [ 3.220000] Bridge firewalling registered
  616. [ 3.228000] 8021q: 802.1Q VLAN Support v1.8
  617. [ 3.248000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
  618. [ 3.260000] Freeing unused kernel memory: 248K
  619. [ 3.976000] init: Console is alive
  620. [ 6.180000] usbcore: registered new interface driver usbfs
  621. [ 6.192000] usbcore: registered new interface driver hub
  622. [ 6.200000] usbcore: registered new device driver usb
  623. [ 6.212000] antenna_init sucess
  624. [ 6.244000] xiehj : RALINK_REG_GPIOMODE = 0xa01a8
  625. [ 6.252000] xiehj : RALINK_REG_GPIOMODE = 0xa01a8
  626. [ 6.264000] reset_cp_gpio = 5
  627. [ 6.272000] xiehj : gpio = 5, val = 0
  628. [ 6.280000] register reboot notifier
  629. [ 6.292000] SCSI subsystem initialized
  630. [ 6.304000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  631. [ 6.320000] ehci-platform: EHCI generic platform driver
  632. [ 6.336000] *****run project phy.
  633. [ 6.348000] FM_OUT value: u4FmOut = 0(0x00000000)
  634. [ 6.364000] FM_OUT value: u4FmOut = 0(0x00000000)
  635. [ 6.380000] FM_OUT value: u4FmOut = 0(0x00000000)
  636. [ 6.396000] FM_OUT value: u4FmOut = 0(0x00000000)
  637. [ 6.412000] FM_OUT value: u4FmOut = 0(0x00000000)
  638. [ 6.428000] FM_OUT value: u4FmOut = 0(0x00000000)
  639. [ 6.444000] FM_OUT value: u4FmOut = 0(0x00000000)
  640. [ 6.460000] FM_OUT value: u4FmOut = 0(0x00000000)
  641. [ 6.476000] FM_OUT value: u4FmOut = 0(0x00000000)
  642. [ 6.492000] FM_OUT value: u4FmOut = 0(0x00000000)
  643. [ 6.524000] FM_OUT value: u4FmOut = 0(0x00000000)
  644. [ 6.540000] FM_OUT value: u4FmOut = 0(0x00000000)
  645. [ 6.556000] FM_OUT value: u4FmOut = 0(0x00000000)
  646. [ 6.572000] FM_OUT value: u4FmOut = 0(0x00000000)
  647. [ 6.588000] FM_OUT value: u4FmOut = 0(0x00000000)
  648. [ 6.604000] FM_OUT value: u4FmOut = 0(0x00000000)
  649. [ 6.620000] FM_OUT value: u4FmOut = 0(0x00000000)
  650. [ 6.636000] FM_OUT value: u4FmOut = 0(0x00000000)
  651. [ 6.652000] FM_OUT value: u4FmOut = 0(0x00000000)
  652. [ 6.668000] FM_OUT value: u4FmOut = 0(0x00000000)
  653. [ 6.796000] xhci-hcd xhci-hcd: xHCI Host Controller
  654. [ 6.804000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
  655. [ 6.820000] xhci-hcd xhci-hcd: irq 22, io mem 0x1e1c0000
  656. [ 6.832000] hub 1-0:1.0: USB hub found
  657. [ 6.840000] hub 1-0:1.0: 2 ports detected
  658. [ 6.848000] xhci-hcd xhci-hcd: xHCI Host Controller
  659. [ 6.856000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
  660. [ 6.872000] hub 2-0:1.0: USB hub found
  661. [ 6.880000] hub 2-0:1.0: 1 port detected
  662. [ 6.892000] usbcore: registered new interface driver usb-storage
  663. [ 6.996000] init: - preinit -
  664. ifconfig: bad address 'broadcast'
  665. usage: netmsg <ip> "<message>"
  666. Press the [f] key and hit [enter] to enter failsafe mode
  667. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  668. mount_root.
  669. emmc_partition_find(0x74d008, rootfs_data)
  670. (null) is not created by block2mtd, skip.
  671. [ 10.584000] block: attempting to load /etc/config/fstab
  672. [ 10.596000] block: extroot: not configured
  673. jffs2 is ready
  674. jffs2 is ready
  675. [ 10.668000] jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x00247ff0: Read 0xffffffff, calculated 0x245604fd
  676. [ 11.036000] jffs2: notice: (349) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 20 of xref (0 dead, 8 orphan) found.
  677. [ 11.100000] block: attempting to load /etc/config/fstab
  678. [ 11.112000] block: extroot: not configured
  679. switching to overlay
  680. [ 11.132000] FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF
  681. [ 11.144000] Raeth v3.1 (Tasklet)
  682. [ 11.152000]
  683. [ 11.152000] phy_tx_ring = 0x00c10000, tx_ring = 0xa0c10000
  684. [ 11.168000]
  685. [ 11.168000] phy_rx_ring0 = 0x00c14000, rx_ring[0] = 0xa0c14000
  686. [ 11.184000]
  687. [ 11.184000] phy_rx_ring0 = 0x00c14000, rx_ring[0] = 0xa0c14000
  688. [ 11.220000] MT7530 Reset Completed!!
  689. [ 11.228000] change HW-TRAP to 0x117c8f
  690. [ 11.236000] set LAN/WAN WLLLL
  691. [ 11.248000] GMAC1_MAC_ADRH -- : 0x0000000c
  692. [ 11.256000] GMAC1_MAC_ADRL -- : 0x4328800e
  693. [ 11.264000] GDMA2_MAC_ADRH -- : 0x0000000c
  694. [ 11.272000] GDMA2_MAC_ADRL -- : 0x43288063
  695. [ 11.280000] eth2: ===> VirtualIF_open
  696. [ 11.288000] MT7621 GE2 link rate to 1G
  697. [ 11.288000] CDMA_CSG_CFG = 81000000
  698. [ 11.288000] GDMA1_FWD_CFG = 20710000
  699. [ 11.288000] GDMA2_FWD_CFG = 20710000
  700. [ 11.316000] ra2880stop()...Done
  701. [ 11.324000] eth2: ===> VirtualIF_close
  702. [ 11.332000] Free TX/RX Ring Memory!
  703. [ 11.344000] procd: - early -
  704. [ 12.152000] procd: - ubus -
  705. [ 13.168000] procd: - init -
  706. Please press Enter to activate this console.
  707. [ 14.264000] NET: Registered protocol family 8
  708. [ 14.272000] NET: Registered protocol family 20
  709. [ 14.292000] l2tp_core: L2TP core driver, V2.0
  710. [ 14.300000] l2tp_netlink: L2TP netlink interface
  711. [ 14.312000] gre: GRE over IPv4 demultiplexor driver
  712. [ 14.324000] ip_gre: GRE over IPv4 tunneling driver
  713. [ 14.340000] PPP generic driver version 2.4.2
  714. [ 14.360000] nf_conntrack version 0.5.0 (1954 buckets, 7816 max)
  715. [ 14.376000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  716. [ 14.420000] u32 classifier
  717. [ 14.424000] input device check on
  718. [ 14.432000] Actions configured
  719. [ 14.440000] Mirror/redirect action on
  720. [ 14.452000] Failed to load ipt action
  721. [ 14.480000] fuse init (API version 7.22)
  722. [ 14.496000] usbcore: registered new interface driver cdc_acm
  723. [ 14.508000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  724. [ 14.532000] Ebtables v2.0 registered
  725. [ 14.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
  726. [ 14.548000] Type=Linux
  727. [ 14.680000] register rlt_drv
  728. [ 14.684000] ===> rt_pci_probe()
  729. [ 14.696000]
  730. [ 14.696000]
  731. [ 14.696000] === pAd = c0d81000, size = 1345960 ===
  732. [ 14.696000]
  733. [ 14.716000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
  734. [ 14.728000] <-- RTMPAllocAdapterBlock, Status=0
  735. [ 14.736000] pAd->CSRBaseAddress =0xc0c80000, csr_addr=0xc0c80000!
  736. [ 14.748000] device_id =0x7603
  737. [ 14.756000] RtmpChipOpsHook(474): Not support for HIF_MT yet!
  738. [ 14.768000] mt7603_init()-->
  739. [ 14.772000] mt_bcn_buf_init(224): Not support for HIF_MT yet!
  740. [ 14.784000] <--mt7603_init()
  741. [ 14.792000] <=== rt_pci_probe()
  742. [ 15.276000] register mt_drv
  743. [ 15.292000]
  744. [ 15.292000]
  745. [ 15.292000] === pAd = c1881000, size = 2746944 ===
  746. [ 15.292000]
  747. [ 15.312000] <-- RTMPAllocAdapterBlock, Status=0
  748. [ 15.324000] get_wdev_by_idx: invalid idx(0)
  749. [ 15.332000] pAd->PciHif.CSRBaseAddress =0xc1780000, csr_addr=0xc1780000!
  750. [ 15.344000] get_wdev_by_idx: invalid idx(0)
  751. [ 15.352000] RTMPInitPCIeDevice():device_id=0x7663
  752. [ 15.364000] mt_pci_chip_cfg(): HWVer=0x8b10, FWVer=0x8a01, pAd->ChipID=0x7663
  753. [ 15.376000] mt7663_init()-->
  754. [ 15.380000] <--mt7663_init()
  755. [ 15.392000] <-- RTMPAllocTxRxRingMemory, Status=0
  756. [ 15.400000] get_wdev_by_idx: invalid idx(0)
  757. [ 15.412000] get_wdev_by_idx: invalid idx(0)
  758. [ 15.420000] get_wdev_by_idx: invalid idx(0)
  759. [ 15.428000] get_wdev_by_idx: invalid idx(0)
  760. [ 15.436000] get_wdev_by_idx: invalid idx(0)
  761. [ 15.444000] get_wdev_by_idx: invalid idx(0)
  762. [ 15.456000] get_wdev_by_idx: invalid idx(0)
  763. [ 15.464000] add_oom_notifier()
  764. [ 15.600000] PPP MPPE Compression module registered
  765. [ 15.612000] NET: Registered protocol family 24
  766. [ 15.620000] PPTP driver version 0.8.5
  767. [ 15.628000] Ralink APSoC Hardware Watchdog Timer
  768. [ 15.640000] rdm_major = 253
  769. [ 15.656000] usbcore: registered new interface driver ums-alauda
  770. [ 15.672000] usbcore: registered new interface driver ums-cypress
  771. [ 15.684000] usbcore: registered new interface driver ums-datafab
  772. [ 15.700000] usbcore: registered new interface driver ums-freecom
  773. [ 15.712000] usbcore: registered new interface driver ums-isd200
  774. [ 15.728000] usbcore: registered new interface driver ums-jumpshot
  775. [ 15.740000] usbcore: registered new interface driver ums-karma
  776. [ 15.756000] usbcore: registered new interface driver ums-sddr09
  777. [ 15.772000] usbcore: registered new interface driver ums-sddr55
  778. [ 15.784000] usbcore: registered new interface driver ums-usbat
  779. [ 15.800000] usbcore: registered new interface driver usblp
  780. [ 15.844000] xt_time: kernel timezone is -0000
  781. [ 15.856000] usbcore: registered new interface driver cdc_ether
  782. [ 15.876000] fast-classifier[v2.0]: starting up
  783. [ 15.884000] fast-classifier: registered
  784. [ 15.896000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  785. [ 15.924000] usbcore: registered new interface driver rndis_host
  786. [ 18.340000] get_wdev_by_idx: invalid idx(0)
  787. [ 18.380000] get_wdev_by_idx: invalid idx(0)
  788. [ 18.448000] Started WatchDog Timer.
  789. [ 18.456000] Started WatchDog Timer.
  790. [ 19.200000] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  791. [ 19.268000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 3, maxp 8, interval 8, burst 0, mult 0, ep 0x84f7c800, ep_ctx 0xa0c620c0, sch_ep 0x85c49200
  792. [ 19.296000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x84f7c900, ep_ctx 0xa0c62080, sch_ep 0x85c7de00
  793. [ 19.324000] add_ep parameters, dev_speed 3, is_in 0, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x84f7c92c, ep_ctx 0xa0c62060, sch_ep 0x85c7db00
  794. [ 19.356000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 3, maxp 10, interval 256, burst 0, mult 0, ep 0x85c49c00, ep_ctx 0xa0c62140, sch_ep 0x85c7d800
  795. [ 19.384000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49b80, ep_ctx 0xa0c62100, sch_ep 0x85c7d500
  796. [ 19.412000] add_ep parameters, dev_speed 3, is_in 0, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49bac, ep_ctx 0xa0c620a0, sch_ep 0x85c7d200
  797. [ 19.440000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49b00, ep_ctx 0xa0c62180, sch_ep 0x85c72e00
  798. [ 19.472000] add_ep parameters, dev_speed 3, is_in 0, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49b2c, ep_ctx 0xa0c620e0, sch_ep 0x85c72b00
  799. [ 19.500000] add_ep parameters, dev_speed 3, is_in 1, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49a80, ep_ctx 0xa0c621c0, sch_ep 0x85c72800
  800. [ 19.528000] add_ep parameters, dev_speed 3, is_in 0, isTT 0, ep_type 2, maxp 512, interval 1, burst 0, mult 0, ep 0x85c49aac, ep_ctx 0xa0c62120, sch_ep 0x85c72500
  801. [ 19.572000] generic_rndis_bind: rx_urb_size: 0x4000
  802. [ 19.584000] generic_rndis_bind: data zero copy=0
  803. [ 19.608000] rndis_host 1-1:1.0 eth1: register 'rndis_host' at usb-xhci-hcd-1, RNDIS device, ac:50:43:88:e6:6b
  804. [ 19.640000] cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.
  805. [ 19.656000] cdc_acm 1-1:1.2: ttyACM0: USB ACM device
  806. [ 19.668000] acm register reboot notifier
  807. [ 26.012000] UBI: attaching mtd8 to ubi0
  808. [ 26.484000] UBI: scanning is finished
  809. [ 26.504000] UBI: attached mtd8 (name "ota", size 48 MiB) to ubi0
  810. [ 26.516000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  811. [ 26.532000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  812. [ 26.544000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  813. [ 26.556000] UBI: good PEBs: 386, bad PEBs: 0, corrupted PEBs: 0
  814. [ 26.568000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  815. [ 26.584000] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 155050756
  816. [ 26.600000] UBI: available PEBs: 15, total reserved PEBs: 371, PEBs reserved for bad PEB handling: 20
  817. [ 26.620000] UBI: background thread "ubi_bgt0d" started, PID 1252
  818. [ 26.644000] UBIFS: background thread "ubifs_bgt0_0" started, PID 1256
  819. [ 26.716000] UBIFS: recovery needed
  820. [ 26.904000] UBIFS: recovery completed
  821. [ 26.908000] UBIFS: mounted UBI device 0, volume 0, name "ota"
  822. [ 26.920000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  823. [ 26.940000] UBIFS: FS size: 42790912 bytes (40 MiB, 337 LEBs), journal size 2158592 bytes (2 MiB, 17 LEBs)
  824. [ 26.960000] UBIFS: reserved for root: 2021120 bytes (1973 KiB)
  825. [ 26.972000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 1DF5FDDA-B668-40BD-93EC-0670AA02DB92, small LPT model
  826. [ 27.448000] DiagSaverEnable=false
  827. [ 27.456000] /etc/rc.common should not exe DiagSaver,exit
  828. [ 27.572000] firewall boot
  829. [ 27.584000] firewall start_service
  830. [ 29.588000] network start_service
  831. [ 29.600000] network init_switch
  832. [ 29.784000] network service_triggers
  833. [ 29.948000] network service_running
  834. [ 30.628000] *************dropbear_mode is close***********
  835. [ 33.112000] get_wdev_by_idx: invalid idx(0)
  836. [ 33.136000] get_wdev_by_idx: invalid idx(0)
  837. [ 33.512000] FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF
  838. [ 33.524000] Raeth v3.1 (Tasklet)
  839. [ 33.536000]
  840. [ 33.536000] phy_tx_ring = 0x00ccc000, tx_ring = 0xa0ccc000
  841. [ 33.548000]
  842. [ 33.548000] phy_rx_ring0 = 0x00cd0000, rx_ring[0] = 0xa0cd0000
  843. [ 33.568000]
  844. [ 33.568000] phy_rx_ring0 = 0x00cd0000, rx_ring[0] = 0xa0cd0000
  845. [ 33.608000] MT7530 Reset Completed!!
  846. [ 33.616000] change HW-TRAP to 0x117c8f
  847. [ 33.624000] set LAN/WAN WLLLL
  848. [ 33.636000] GMAC1_MAC_ADRH -- : 0x0000000c
  849. [ 33.644000] GMAC1_MAC_ADRL -- : 0x4328800e
  850. [ 33.652000] eth2: ===> VirtualIF_open
  851. [ 33.660000] CDMA_CSG_CFG = 81000000
  852. [ 33.660000] MT7621 GE2 link rate to 1G
  853. [ 33.676000] GDMA1_FWD_CFG = 20710000
  854. [ 33.684000] GDMA2_FWD_CFG = 20710000
  855. [ 33.692000] device eth0 entered promiscuous mode
  856. [ 33.704000] br-lan: port 1(eth0) entered forwarding state
  857. [ 33.712000] br-lan: port 1(eth0) entered forwarding state
  858. [ 33.804000] get_wdev_by_idx: invalid idx(0)
  859. [ 33.820000] ESW: send SIGUSR2 to pid
  860. [ 33.832000] get_wdev_by_idx: invalid idx(0)
  861. [ 34.144000] TX_BCN DESC a0c2b000 size = 320
  862. [ 34.152000] RX[0] DESC a0c2d000 size = 2048
  863. [ 34.160000] RX[1] DESC a0c2e000 size = 2048
  864. [ 34.180000] E2pAccessMode=1
  865. [ 34.188000] cfg_mode=9
  866. [ 34.192000] cfg_mode=9
  867. [ 34.196000] wmode_band_equal(): Band Equal!
  868. [ 34.208000] APSDCapable[0]=0
  869. [ 34.216000] APSDCapable[1]=0
  870. [ 34.220000] APSDCapable[2]=0
  871. [ 34.228000] APSDCapable[3]=0
  872. [ 34.232000] APSDCapable[4]=0
  873. [ 34.236000] APSDCapable[5]=0
  874. [ 34.244000] APSDCapable[6]=0
  875. [ 34.248000] APSDCapable[7]=0
  876. [ 34.256000] APSDCapable[8]=0
  877. [ 34.260000] APSDCapable[9]=0
  878. [ 34.268000] APSDCapable[10]=0
  879. [ 34.272000] APSDCapable[11]=0
  880. [ 34.280000] APSDCapable[12]=0
  881. [ 34.284000] APSDCapable[13]=0
  882. [ 34.292000] APSDCapable[14]=0
  883. [ 34.296000] APSDCapable[15]=0
  884. [ 34.304000] default ApCliAPSDCapable[0]=0
  885. [ 34.508000] Key1Str is Invalid key length(0) or Type(1)
  886. [ 34.520000] Key2Str is Invalid key length(0) or Type(0)
  887. [ 34.532000] Key3Str is Invalid key length(0) or Type(0)
  888. [ 34.540000] Key4Str is Invalid key length(0) or Type(0)
  889. [ 34.556000] IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0).
  890. [ 34.616000] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
  891. [ 34.628000] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
  892. [ 34.640000] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
  893. [ 34.652000] FW Version:CL173766_R
  894. [ 34.660000] FW Build Date:20171110105932
  895. [ 34.668000] CmdAddressLenReq:(ret = 0)
  896. [ 34.676000] CmdFwStartReq: override = 1, address = 1048576
  897. [ 34.688000] CmdStartDLRsp: WiFI FW Download Success
  898. [ 34.708000] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
  899. [ 34.720000] efuse_probe: efuse = 10000012
  900. [ 34.728000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
  901. [ 34.736000] RtmpEepromGetDefault::e2p_dafault=1
  902. [ 34.748000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
  903. [ 34.760000] NVM is FLASH mode, flash_offset = 0x0
  904. [ 34.772000] 1. Phy Mode = 14
  905. [ 34.776000] @@@ NICReadEEPROMParameters : pAd->FWLoad=0
  906. [ 34.948000] Country Region from e2p = ffff
  907. [ 34.956000] tssi_1_target_pwr_g_band = 36
  908. [ 34.964000] 2. Phy Mode = 14
  909. [ 34.968000] 3. Phy Mode = 14
  910. [ 34.976000] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
  911. [ 34.988000] NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
  912. [ 35.004000] mt_mac_init()-->
  913. [ 35.008000] mt7603_init_mac_cr()-->
  914. [ 35.020000] AsicSetMacMaxLen(1899): Set the Max RxPktLen=1024!
  915. [ 35.032000] <--mt_mac_init()
  916. [ 35.036000] WTBL Segment 1 info:
  917. [ 35.044000] MemBaseAddr/FID:0x28000/0
  918. [ 35.052000] EntrySize/Cnt:32/128
  919. [ 35.060000] WTBL Segment 2 info:
  920. [ 35.064000] MemBaseAddr/FID:0x40000/0
  921. [ 35.072000] EntrySize/Cnt:64/128
  922. [ 35.080000] WTBL Segment 3 info:
  923. [ 35.088000] MemBaseAddr/FID:0x42000/64
  924. [ 35.096000] EntrySize/Cnt:64/128
  925. [ 35.100000] WTBL Segment 4 info:
  926. [ 35.108000] MemBaseAddr/FID:0x44000/128
  927. [ 35.116000] EntrySize/Cnt:32/128
  928. [ 35.124000] MtAsicACQueue: Write CR:21510, Value=10421
  929. [ 35.132000] MtAsicACQueue: Write CR:21500, Value=10421
  930. [ 35.144000] AntCfgInit(2657): Not support for HIF_MT yet!
  931. [ 35.152000] MCS Set = ff ff 00 00 00
  932. [ 35.160000] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  933. [ 35.384000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
  934. [ 35.396000] AsicSetRalinkBurstMode(4312): Not support for HIF_MT yet!
  935. [ 35.408000] RTMPSetPiggyBack(935): Not support for HIF_MT yet!
  936. [ 35.640000] xiehj: antenna status changed!!
  937. [ 35.716000] br-lan: port 1(eth0) entered forwarding state
  938. [ 35.928000] firewall reload
  939. [ 35.944000] firewall reload start1
  940. [ 37.304000] ****************enter rc.local***********
  941. [ 37.348000] AsicSetTxPreamble(4299): Not support for HIF_MT yet!
  942. [ 37.364000] luow-MT7603 LEDStatus: 1, LEDCmd: 2
  943. [ 37.376000] AsicAddSharedKeyEntry(2065): Not support for HIF_MT yet!
  944. [ 37.388000] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
  945. [ 37.400000] ap_ftkd> Initialize FT KDP Module...
  946. [ 37.408000] Main bssid = e4:7d:eb:74:37:5e
  947. [ 37.420000] luow-MT7603 LEDStatus: 1, LEDCmd: 2
  948. [ 37.428000] <==== rt28xx_init, Status=0
  949. [ 37.436000] @@@ ed_monitor_exit : ===>
  950. [ 37.444000] @@@ ed_monitor_exit : <===
  951. [ 37.452000] mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0x8564267c, EDCCA_Status=0
  952. [ 37.468000] WiFi Startup Cost (ra0): 3.328s
  953. [ 37.480000] get_wdev_by_idx: invalid idx(0)
  954. [ 37.508000] get_wdev_by_idx: invalid idx(0)
  955. [ 38.056000] device ra0 entered promiscuous mode
  956. [ 38.064000] br-lan: port 2(ra0) entered forwarding state
  957. [ 38.076000] br-lan: port 2(ra0) entered forwarding state
  958. [ 38.148000] get_wdev_by_idx: invalid idx(0)
  959. [ 38.204000] get_wdev_by_idx: invalid idx(0)
  960. [ 38.304000] Device[2.4G] MaxCliNum = 32
  961. [ 38.376000] get_wdev_by_idx: invalid idx(0)
  962. [ 38.392000] get_wdev_by_idx: invalid idx(0)
  963. [ 38.644000] get_wdev_by_idx: invalid idx(0)
  964. [ 38.660000] get_wdev_by_idx: invalid idx(0)
  965. [ 38.956000] get_wdev_by_idx: invalid idx(0)
  966. [ 39.984000] firewall reload end1
  967. [ 40.080000] br-lan: port 2(ra0) entered forwarding state
  968. [ 40.228000] *************hotplug: br-lan up: start dnsmasq...
  969. [ 40.460000] luow-MT7603 LEDStatus: 2, LEDCmd: 1
  970. [ 40.468000] MTPciPollTxRxEmpty
  971. [ 41.120000] -1McastPsQueue.Number 0...
  972. [ 41.128000] -2McastPsQueue.Number 0...
  973. [ 41.136000] McastPsQueue.Number 0...
  974. [ 41.144000] 2McastPsQueue.Number 0...
  975. [ 41.152000] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
  976. [ 41.164000] RTMPSetPiggyBack(935): Not support for HIF_MT yet!
  977. [ 41.176000] luow-MT7603 LEDStatus: 0, LEDCmd: 0
  978. [ 41.184000] ap_ftkd> Release FT KDP Module...
  979. [ 41.192000] luow-MT7603 LEDStatus: 4, LEDCmd: -1
  980. [ 41.208000] luow-MT7603 LEDStatus: 2, LEDCmd: 1
  981. [ 41.216000] RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
  982. [ 41.228000] RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
  983. [ 41.240000] tx_kickout_fail_count = 0
  984. [ 41.248000] tx_timeout_fail_count = 0
  985. [ 41.256000] rx_receive_fail_count = 0
  986. [ 41.260000] alloc_cmd_msg = 43
  987. [ 41.268000] free_cmd_msg = 43
  988. [ 41.280000] br-lan: port 2(ra0) entered disabled state
  989. [ 41.336000] get_wdev_by_idx: invalid idx(0)
  990. [ 41.352000] get_wdev_by_idx: invalid idx(0)
  991. [ 41.492000] get_wdev_by_idx: invalid idx(0)
  992. [ 41.508000] ****************mac vlan start***********
  993. [ 41.520000] device eth2 entered promiscuous mode
  994. [ 41.624000] get_wdev_by_idx: invalid idx(0)
  995. [ 41.644000] get_wdev_by_idx: invalid idx(0)
  996. [ 41.744000] GDMA2_MAC_ADRH -- : 0x0000000c
  997. [ 41.752000] GDMA2_MAC_ADRL -- : 0x4328802c
  998. [ 41.840000] ****************mac vlan ok***********
  999. [ 41.868000] *************waitsleep ra0
  1000. [ 41.884000] ****************start autolan add br-lan***********
  1001. [ 41.900000] device autolan entered promiscuous mode
  1002. [ 41.912000] br-lan: port 3(autolan) entered forwarding state
  1003. [ 41.920000] br-lan: port 3(autolan) entered forwarding state
  1004. [ 41.996000] TX_BCN DESC a0c2b000 size = 320
  1005. [ 42.004000] RX[0] DESC a0c2d000 size = 2048
  1006. [ 42.004000] ****************end autolan add br-lan***********
  1007. [ 42.024000] RX[1] DESC a0c2e000 size = 2048
  1008. [ 42.040000] E2pAccessMode=1
  1009. [ 42.048000] cfg_mode=9
  1010. [ 42.052000] cfg_mode=9
  1011. [ 42.056000] wmode_band_equal(): Band Equal!
  1012. [ 42.068000] APSDCapable[0]=0
  1013. [ 42.072000] APSDCapable[1]=0
  1014. [ 42.080000] APSDCapable[2]=0
  1015. [ 42.084000] APSDCapable[3]=0
  1016. [ 42.092000] APSDCapable[4]=0
  1017. [ 42.096000] APSDCapable[5]=0
  1018. [ 42.104000] APSDCapable[6]=0
  1019. [ 42.108000] APSDCapable[7]=0
  1020. [ 42.116000] APSDCapable[8]=0
  1021. [ 42.120000] APSDCapable[9]=0
  1022. [ 42.124000] APSDCapable[10]=0
  1023. [ 42.132000] APSDCapable[11]=0
  1024. [ 42.136000] APSDCapable[12]=0
  1025. [ 42.144000] APSDCapable[13]=0
  1026. [ 42.148000] APSDCapable[14]=0
  1027. [ 42.156000] APSDCapable[15]=0
  1028. [ 42.160000] default ApCliAPSDCapable[0]=0
  1029. [ 42.292000] Key1Str is Invalid key length(0) or Type(1)
  1030. [ 42.304000] Key2Str is Invalid key length(0) or Type(0)
  1031. [ 42.312000] Key3Str is Invalid key length(0) or Type(0)
  1032. [ 42.324000] Key4Str is Invalid key length(0) or Type(0)
  1033. [ 42.340000] IF(ra0) The length of WAPI PSKPassPhrase is invalid(len=0).
  1034. [ 42.396000] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
  1035. [ 42.408000] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
  1036. [ 42.420000] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
  1037. [ 42.432000] FW Version:CL173766_R
  1038. [ 42.440000] FW Build Date:20171110105932
  1039. [ 42.448000] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
  1040. [ 42.460000] efuse_probe: efuse = 10000012
  1041. [ 42.468000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
  1042. [ 42.480000] RtmpEepromGetDefault::e2p_dafault=1
  1043. [ 42.488000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
  1044. [ 42.504000] NVM is FLASH mode, flash_offset = 0x0
  1045. [ 42.512000] 1. Phy Mode = 14
  1046. [ 42.520000] @@@ NICReadEEPROMParameters : pAd->FWLoad=1
  1047. [ 42.528000] Country Region from e2p = ffff
  1048. [ 42.536000] tssi_1_target_pwr_g_band = 36
  1049. [ 42.544000] 2. Phy Mode = 14
  1050. [ 42.552000] 3. Phy Mode = 14
  1051. [ 42.556000] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
  1052. [ 42.568000] NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
  1053. [ 42.584000] mt_mac_init()-->
  1054. [ 42.588000] mt7603_init_mac_cr()-->
  1055. [ 42.596000] AsicSetMacMaxLen(1899): Set the Max RxPktLen=1024!
  1056. [ 42.608000] <--mt_mac_init()
  1057. [ 42.616000] WTBL Segment 1 info:
  1058. [ 42.620000] MemBaseAddr/FID:0x28000/0
  1059. [ 42.628000] EntrySize/Cnt:32/128
  1060. [ 42.636000] WTBL Segment 2 info:
  1061. [ 42.644000] MemBaseAddr/FID:0x40000/0
  1062. [ 42.648000] EntrySize/Cnt:64/128
  1063. [ 42.656000] WTBL Segment 3 info:
  1064. [ 42.664000] MemBaseAddr/FID:0x42000/64
  1065. [ 42.672000] EntrySize/Cnt:64/128
  1066. [ 42.676000] WTBL Segment 4 info:
  1067. [ 42.684000] MemBaseAddr/FID:0x44000/128
  1068. [ 42.692000] EntrySize/Cnt:32/128
  1069. [ 42.700000] MtAsicACQueue: Write CR:21510, Value=10421
  1070. [ 42.708000] MtAsicACQueue: Write CR:21500, Value=10421
  1071. [ 42.720000] AntCfgInit(2657): Not support for HIF_MT yet!
  1072. [ 42.732000] RTMPSetPhyMode(): channel out of range, use first ch=0
  1073. [ 42.744000] MCS Set = ff ff 00 00 00
  1074. [ 42.752000] [BuildAcsScanChList] Support channel: PrimCh=1, CentCh=1, DFS=0, skip 0
  1075. [ 42.764000] [BuildAcsScanChList] Support channel: PrimCh=2, CentCh=2, DFS=0, skip 0
  1076. [ 42.780000] [BuildAcsScanChList] Support channel: PrimCh=3, CentCh=3, DFS=0, skip 0
  1077. [ 42.796000] [BuildAcsScanChList] Support channel: PrimCh=4, CentCh=4, DFS=0, skip 0
  1078. [ 42.812000] [BuildAcsScanChList] Support channel: PrimCh=5, CentCh=5, DFS=0, skip 0
  1079. [ 42.828000] [BuildAcsScanChList] Support channel: PrimCh=6, CentCh=6, DFS=0, skip 0
  1080. [ 42.840000] [BuildAcsScanChList] Support channel: PrimCh=7, CentCh=7, DFS=0, skip 0
  1081. [ 42.856000] [BuildAcsScanChList] Support channel: PrimCh=8, CentCh=8, DFS=0, skip 0
  1082. [ 42.872000] [BuildAcsScanChList] Support channel: PrimCh=9, CentCh=9, DFS=0, skip 0
  1083. [ 42.888000] [BuildAcsScanChList] Support channel: PrimCh=10, CentCh=10, DFS=0, skip 0
  1084. [ 42.904000] [BuildAcsScanChList] Support channel: PrimCh=11, CentCh=11, DFS=0, skip 0
  1085. [ 43.924000] br-lan: port 3(autolan) entered forwarding state
  1086. [ 48.984000] Rule 2 APCnt : minimum APCnt with minimum interference(dirtiness: 30~32) ==> Select Channel 9
  1087. [ 49.000000] Dirtiness = 30 , Min ApCnt = 1
  1088. [ 49.008000] select channel[9] cost: 6088
  1089. [ 49.016000] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  1090. [ 49.148000] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
  1091. [ 49.160000] AsicSetRalinkBurstMode(4312): Not support for HIF_MT yet!
  1092. [ 49.172000] RTMPSetPiggyBack(935): Not support for HIF_MT yet!
  1093. [ 49.208000] AsicSetTxPreamble(4299): Not support for HIF_MT yet!
  1094. [ 49.220000] luow-MT7603 LEDStatus: 1, LEDCmd: 2
  1095. [ 49.228000] AsicAddSharedKeyEntry(2065): Not support for HIF_MT yet!
  1096. [ 49.244000] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
  1097. [ 49.256000] ap_ftkd> Initialize FT KDP Module...
  1098. [ 49.264000] Main bssid = e4:7d:eb:74:37:5e
  1099. [ 49.272000] luow-MT7603 LEDStatus: 1, LEDCmd: 2
  1100. [ 49.280000] <==== rt28xx_init, Status=0
  1101. [ 49.288000] @@@ ed_monitor_exit : ===>
  1102. [ 49.296000] @@@ ed_monitor_exit : <===
  1103. [ 49.304000] mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0x8564267c, EDCCA_Status=0
  1104. [ 49.320000] WiFi Startup Cost (ra0): 7.324s
  1105. [ 49.328000] br-lan: port 2(ra0) entered forwarding state
  1106. [ 49.340000] br-lan: port 2(ra0) entered forwarding state
  1107.  
  1108. cpe login: [ 49.556000] *************hotplug: lo up: start dnsmasq...
  1109. [ 49.904000] get_wdev_by_idx: invalid idx(0)
  1110. [ 49.936000] Device[2.4G] MaxCliNum = 32
  1111. [ 50.016000] get_wdev_by_idx: invalid idx(0)
  1112. [ 50.032000] get_wdev_by_idx: invalid idx(0)
  1113. [ 50.320000] get_wdev_by_idx: invalid idx(0)
  1114. [ 50.340000] get_wdev_by_idx: invalid idx(0)
  1115. [ 50.376000] firewall reload
  1116. [ 50.388000] firewall reload start1
  1117. [ 50.472000] get_wdev_by_idx: invalid idx(0)
  1118. [ 50.704000] get_wdev_by_idx: invalid idx(0)
  1119. [ 51.344000] br-lan: port 2(ra0) entered forwarding state
  1120. [ 51.732000] firewall reload end1
  1121. [ 51.784000] *************hotplug: eth1 up: start dnsmasq...
  1122. [ 52.580000] firewall reload
  1123. [ 52.596000] firewall reload start1
  1124. [ 52.656000] get_wdev_by_idx: invalid idx(0)
  1125. [ 52.888000] get_wdev_by_idx: invalid idx(0)
  1126. [ 53.472000] ******************leave rc.local
  1127. [ 53.916000] firewall reload end1
  1128. [ 53.972000] *************hotplug: eth1 up: start dnsmasq...
  1129. [ 54.440000] firewall reload
  1130. [ 54.456000] firewall reload start1
  1131. [ 54.568000] get_wdev_by_idx: invalid idx(0)
  1132. [ 54.824000] get_wdev_by_idx: invalid idx(0)
  1133. [ 55.852000] firewall reload end1
  1134.  
  1135. cpe login: �
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!