Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- bootlog of the latest DD-WRT 4.14.21 for MIPSEL routers (currently running on an MT7621AT+MT7615x2 [DIR882]).
- special edition because it uses The Crispy One John Crispin aka blogic's (i am sure he hates the moniker, but as he is aware: nicks aren't always chosen ;)) mediatek ethernet driver, just to have everything up and running.
- of course the ethernet driver is not as good as RAETH, but Countrymen Crispin and Burton have pulled multiple-magnitudes of their weight for many years, so this will have to do as a "proof of concept". ideally, with RAETH, we shave a few more megabytes with respect to working memory.
- R done
- U Bytes transferred = 16377566 (f9e6de hex)
- LoadAddr=84000000 NetBootFileXferSize= 00f9e6de
- E B......................................................................................................................................R..................................................................................................................
- I......................................................................................................................................T...................................................................................................................
- A.
- N.
- NDone!
- I## Booting image at bc060000 ...
- A Image Name: Linux Kernel Image
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 3977503 Bytes = 3.8 MB
- Load Address: 80001000
- Entry Point: 806f1538
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 806f1538) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- Linux version 4.14.21 (Gagan@GagansMacPro) (gcc version 7.3.0 (GCC)) #1486 SMP PREEMPT Sat Feb 24 17:17:59 MST 2018
- SoC Type: MediaTek MT7621 ver:1 eco:3
- bootconsole [early0] enabled
- CPU0 revision is: 0001992f (MIPS 1004Kc)
- MIPS: machine is D-Link DIR-882 rev. A1
- Determined physical RAM map:
- memory: 08000000 @ 00000000 (usable)
- VPE topology {2,2} total 4
- Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Zone ranges:
- DMA [mem 0x0000000000000000-0x0000000000ffffff]
- Normal [mem 0x0000000001000000-0x0000000007ffffff]
- HighMem empty
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- percpu: Embedded 15 pages/cpu @8110e000 s31472 r8192 d21776 u61440
- Built 1 zonelists, mobility grouping on. Total pages: 32512
- Kernel command line: console=ttyS0,57600n8 rootfstype=squashfs root=/dev/mtdblock5
- log_buf_len individual max cpu contribution: 4096 bytes
- log_buf_len total cpu_extra contributions: 12288 bytes
- log_buf_len min size: 16384 bytes
- log_buf_len: 32768 bytes
- early log buf free: 14184(86%)
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Writing ErrCtl register=0001c0e0
- Readback ErrCtl register=0001c0e0
- Memory: 118444K/131072K available (7139K kernel code, 1363K rwdata, 1464K rodata, 260K init, 904K bss, 12628K reserved, 0K cma-reserved, 0K highmem)
- SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptible hierarchical RCU implementation.
- Tasks RCU enabled.
- NR_IRQS: 256
- clocksource: GIC: mask: 0xfffffffff max_cycles: 0xfffffffff, max_idle_ns: 34750190079 ns
- sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
- Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
- pid_max: default: 4096 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Hierarchical SRCU implementation.
- smp: Bringing up secondary CPUs ...
- Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- CPU1 revision is: 0001992f (MIPS 1004Kc)
- Synchronize counters for CPU 1: done.
- Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- CPU2 revision is: 0001992f (MIPS 1004Kc)
- Synchronize counters for CPU 2: done.
- Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- CPU3 revision is: 0001992f (MIPS 1004Kc)
- Synchronize counters for CPU 3: done.
- smp: Brought up 1 node, 4 CPUs
- devtmpfs: initialized
- random: get_random_u32 called from bucket_table_alloc+0x2a4/0x358 with crng_init=0
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- futex hash table entries: 16 (order: -3, 512 bytes)
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- pull PCIe RST: RALINK_RSTCTRL = 4000000
- release PCIe RST: RALINK_RSTCTRL = 7000000
- ***** Xtal 40MHz *****
- release PCIe RST: RALINK_RSTCTRL = 7000000
- Port 0 N_FTS = 1b105000
- Port 1 N_FTS = 1b105000
- Port 2 N_FTS = 1b102800
- PCIE2 no card, disable it(RST&CLK)
- -> 21007f2
- PCIE0 enabled
- PCIE1 enabled
- PCI host bridge /pcie@1e140000 ranges:
- MEM 0x0000000060000000..0x000000006fffffff
- IO 0x000000001e160000..0x000000001e16ffff
- PCI coherence region base: 0x80820000, mask/settings: 0x60000000
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- pci_bus 0000:00: root bus resource [io 0xffffffff]
- pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- pci 0000:00:00.0: PCI bridge to [bus 01]
- pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
- pci 0000:00:01.0: PCI bridge to [bus 02]
- pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- random: fast init done
- clocksource: Switched to clocksource GIC
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- UDP hash table entries: 128 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- 4 CPUs re-calibrate udelay(lpj = 1167360)
- workingset: timestamp_bits=30 max_order=15 bucket_order=0
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- io scheduler noop registered (default)
- io scheduler deadline registered
- io scheduler mq-deadline registered
- io scheduler kyber registered
- hsdma-mt7621 1e007000.hsdma: rx: 1, tx: 1
- serial8250_init
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- console [ttyS0] disabled
- 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
- console [ttyS0] enabled
- console [ttyS0] enabled
- bootconsole [early0] disabled
- bootconsole [early0] disabled
- Ralink gpio driver initialized
- cacheinfo: Failed to find cpu0 device node
- cacheinfo: Unable to detect cache hierarchy for CPU 0
- physmap platform flash device: 01000000 at 1c000000
- virtual memory bc000000
- physmap-flash physmap-flash.0: map_probe failed
- flash manufacture id: c2, device id 20 18
- MX25L12805D(c2 2018c220) (16384 Kbytes)
- mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- Creating 6 MTD partitions on "raspi":
- 0x000000000000-0x000000030000 : "Bootloader"
- 0x000000030000-0x000000040000 : "Config"
- 0x000000040000-0x000000050000 : "Factory"
- 0x000000050000-0x000000060000 : "Config2"
- 0x000000060000-0x000001000000 : "linux"
- scan from offset 60000
- found squashfs at 42C000
- 0x00000042c000-0x0000013cc000 : "rootfs"
- mtd: partition "rootfs" extends beyond the end of device "raspi" -- size truncated to 0xbd4000
- mtd: device 5 (rootfs) set to be root filesystem
- libphy: Fixed MDIO Bus: probed
- tun: Universal TUN/TAP device driver, 1.6
- netif_napi_add() called with weight 128 on device eth%d
- mtk_soc_eth 1e100000.ethernet: generated random MAC address 8e:3d:9e:0a:9e:97
- libphy: mdio: probed
- mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
- mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- register mt_drv
- bus=0x1, slot = 0x0, irq=0x0
- === pAd = c0101000, size = 3820464 ===
- <-- RTMPAllocAdapterBlock, Status=0
- get_wdev_by_idx: invalid idx(0)
- pAd->PciHif.CSRBaseAddress =0xc0000000, csr_addr=0xc0000000!
- get_wdev_by_idx: invalid idx(0)
- RTMPInitPCIeDevice():device_id=0x7615
- DriverOwn()::Try to Clear FW Own...
- DriverOwn()::Success to clear FW Own
- mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
- mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
- RtmpChipOpsHook(493): Not support for HIF_MT yet! MACVersion=0x0
- mt7615_init()-->
- Use 1st iPAiLNA default bin.
- Use 0st /etc/wlan/MT7615_2G_cal_MT.bin default bin.
- <--mt7615_init()
- ChipOpsMCUHook
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 876ebd88,876ebd88
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 876ebd98,876ebd98
- <-- RTMPAllocTxRxRingMemory, Status=0
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- pci probe count=1
- bus=0x2, slot = 0x1, irq=0x0
- === pAd = c0601000, size = 3820464 ===
- <-- RTMPAllocAdapterBlock, Status=0
- get_wdev_by_idx: invalid idx(0)
- pAd->PciHif.CSRBaseAddress =0xc0500000, csr_addr=0xc0500000!
- get_wdev_by_idx: invalid idx(0)
- RTMPInitPCIeDevice():device_id=0x7615
- DriverOwn()::Try to Clear FW Own...
- DriverOwn()::Success to clear FW Own
- mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
- mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
- RtmpChipOpsHook(493): Not support for HIF_MT yet! MACVersion=0x0
- mt7615_init()-->
- Use 2nd iPAiLNA default bin.
- Use 1st /etc/wlan/MT7615_5G_cal_MT.bin default bin.
- <--mt7615_init()
- ChipOpsMCUHook
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 86ca9f88,86ca9f88
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 86ca9f98,86ca9f98
- <-- RTMPAllocTxRxRingMemory, Status=0
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- pci probe count=2
- rdm_major = 255
- xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
- xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
- xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
- usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- usbcore: registered new interface driver usb-storage
- i2c /dev entries driver
- rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
- Ralink APSoC Hardware Watchdog Timer
- Enable MTK AesEngine Module (verson=00000401)
- reg_int_mask = 0, INT_MASK = 0
- phy_tx_ring0 = 0x00c00000, tx_ring0 = 0xa0c00000
- phy_rx_ring0 = 0x00c01000, rx_ring0 = 0xa0c01000
- TX_CTX_IDX0 = 0, TX_DTX_IDX0 = 0
- RX_CRX_IDX0 = 0, RX_DRX_IDX0 = 800080
- set burstmode = 00, AES_GLO_CFG = 0
- Registering MediaTek AES-cbc engine to kernel
- Registering MediaTek AES engine to kernel
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- u32 classifier
- Performance counters on
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
- ctnetlink v0.93: registering with nfnetlink.
- ipip: IPv4 and MPLS over IPv4 tunneling driver
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 17
- Bridge firewalling registered
- NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
- DECnet: Routing cache hash table of 512 buckets, 4Kbytes
- NET: Registered protocol family 12
- 8021q: 802.1Q VLAN Support v1.8
- nvram driver (major 251) installed
- rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- rtc-pcf8563 0-0051: hctosys: unable to read the hardware clock
- VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
- devtmpfs: mounted
- Freeing unused kernel memory: 260K
- This architecture does not have kernel memory protection.
- mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
- usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
- usb-storage 2-1:1.0: USB Mass Storage device detected
- scsi host0: usb-storage 2-1:1.0
- scsi 0:0:0:0: Direct-Access Kingston HyperX Savage PMAP PQ: 0 ANSI: 6
- sd 0:0:0:0: [sda] 122945536 512-byte logical blocks: (62.9 GB/58.6 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
- sd 0:0:0:0: [sda] Attached SCSI removable disk
- start service
- starting Architecture code for rt2880
- done
- Started WatchDog Timer.
- configure mac address to 78:32:xx:xx:96:fd
- mtk_soc_eth 1e100000.ethernet eth2: renamed from eth0
- cannot open /proc/irq/30/smp_affinity
- cannot open /proc/irq/31/smp_affinity
- Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
- Added VLAN with VID == 1 to IF -:eth2:-
- WARNING: VLAN 1 does not work with many switches,
- consider another number if you have problems.
- Added VLAN with VID == 2 to IF -:eth2:-
- [USB] checking...
- function stop_ftpsrv not found
- umount: /mnt: no mount point specified.
- cannot open /proc/sys/net/ipv4/ip_conntrack_max
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_max
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout
- cannot open /proc/sys/net/ipv4/ip_conntrack_max
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_max
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
- cannot open /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- emf: No such file or directory
- Unknown server error
- ifconfig: `--help' gives usage information.
- device br0 entered promiscuous mode
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- br0: port 1(vlan1) entered blocking state
- br0: port 1(vlan1) entered disabled state
- device vlan1 entered promiscuous mode
- device eth2 entered promiscuous mode
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- br0: port 2(vlan2) entered blocking state
- br0: port 2(vlan2) entered disabled state
- device vlan2 entered promiscuous mode
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- DriverOwn()::Return since already in Driver Own...
- ===============================
- Current DevInfo Num: 0
- ===============================
- ===============================
- Current BssInfo Num: 0
- ===============================
- ===============================
- Current StaRec Num: 0
- ===============================
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- RtmpOSFileOpen(): Error 2 opening /tmp/RT2860.dat
- Open file "/tmp/RT2860.dat" failed!
- RTMPReadParametersHook failed, Status[=0x00000001]
- <---HwCtrlThread
- kill wsc task failed!
- !!! mt_wifi_init fail !!!
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- get_wdev_by_idx: invalid idx(0)
- DriverOwn()::Return since already in Driver Own...
- ===============================
- Current DevInfo Num: 0
- ===============================
- ===============================
- Current BssInfo Num: 0
- ===============================
- ===============================
- Current StaRec Num: 0
- ===============================
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- RtmpOSFileOpen(): Error 2 opening /tmp/RT2860_pci.dat
- Open file "/tmp/RT2860_pci.dat" failed!
- RTMPReadParametersHook failed, Status[=0x00000001]
- <---HwCtrlThread
- kill wsc task failed!
- !!! mt_wifi_init fail !!!
- br0: port 2(vlan2) entered blocking state
- br0: port 2(vlan2) entered forwarding state
- br0: port 1(vlan1) entered blocking state
- br0: port 1(vlan1) entered forwarding state
- device br0 left promiscuous mode
- device br0 entered promiscuous mode
- device br0 left promiscuous mode
- wds0: ERROR while getting interface flags: No such device
- wds1: ERROR while getting interface flags: No such device
- wds2: ERROR while getting interface flags: No such device
- wds3: ERROR while getting interface flags: No such device
- apcli0: ERROR while getting interface flags: No such device
- Interface doesn't accept private ioctl...
- set (8BE2): Network is down
- wdsi0: ERROR while getting interface flags: No such device
- wdsi1: ERROR while getting interface flags: No such device
- wdsi2: ERROR while getting interface flags: No such device
- wdsi3: ERROR while getting interface flags: No such device
- apclii0: ERROR while getting interface flags: No such device
- Interface doesn't accept private ioctl...
- set (8BE2): Network iDriverOwn()::Return since already in Driver Own...
- s down
- ===============================
- Current DevInfo Num: 0
- ===============================
- ===============================
- Current BssInfo Num: 0
- ===============================
- ===============================
- Current StaRec Num: 0
- ===============================
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- E2pAccessMode=2
- SSID[0]=TELUS9134-2.4G, EdcaIdx=0
- cfg_mode=9
- cfg_mode=9
- wmode_band_equal(): Band Equal!
- [TxPower] BAND0: 100
- APEdca0
- APEdca1
- APEdca2
- APEdca3
- [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0
- rtmp_read_wds_from_file(): WDS Profile
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- WDS-Enable mode=0
- HT: Ext Channel = BELOW
- WtcSetMaxStaNum: MaxStaNum:87, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:125
- Top Init Done!
- Use alloc_skb
- RX[0] DESC a707c000 size = 8192
- RX[1] DESC a707e000 size = 8192
- Hif Init Done!
- ctl->txq = c04a1748
- ctl->rxq = c04a1754
- ctl->ackq = c04a1760
- ctl->kickq = c04a176c
- ctl->tx_doneq = c04a1778
- ctl->rx_doneq = c04a1784
- mt7615_fw_prepare():FW(8a10), HW(8a10), CHIPID(7615))
- mt7615_fw_prepare(2754): MT7615_E3, USE E3 patch and ram code binary image
- AndesMTLoadRomMethodFwDlRing(1036), cap->rom_patch_len(10302)
- AndesRestartCheck: Current TOP_MISC2(0x1)
- AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
- 2
- 0
- 1
- 7
- 0
- 4
- 2
- 4
- 1
- 1
- 4
- 0
- 4
- 1
- a
- platform =
- A
- L
- P
- S
- hw/sw version =
- 8a
- 10
- 8a
- 10
- patch version =
- 00
- 00
- 00
- 10
- Patch SEM Status=2
- MtCmdPatchSemGet:(ret = 0)
- Patch is not ready && get semaphore success, SemStatus(2)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdPatchFinishReq
- EventGenericEventHandler: CMD Success
- Send checksum req..
- Patch SEM Status=3
- MtCmdPatchSemGet:(ret = 0)
- Release patch semaphore, SemStatus(3)
- AndesMTEraseRomPatch
- WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
- AndesMTLoadFwMethodFwDlRing(810), cap->fw_len(459240)
- Build Date:
- _
- 2
- 0
- 1
- 7
- 0
- 7
- 1
- 8
- 1
- 4
- 3
- 7
- Build Date:
- _
- 2
- 0
- 1
- 7
- 0
- 7
- 1
- 8
- 1
- 4
- 3
- 7
- AndesRestartCheck: Current TOP_MISC2(0x1)
- AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdFwStartReq: override = 1, address = 540672
- EventGenericEventHandler: CMD Success
- Build Date:
- _
- 2
- 0
- 1
- 6
- 1
- 2
- 3
- 0
- 1
- 0
- 1
- 1
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdFwStartReq: override = 4, address = 0
- EventGenericEventHandler: CMD Success
- WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
- MCU Init Done!
- efuse_probe: efuse = 10000212
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- RtmpEepromGetDefault::e2p_dafault=1
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0]
- NICReadEEPROMParameters():Calling eeinit
- NICReadEEPROMParameters: EEPROM 0x52 b313
- NICReadEEPROMParameters: EEPROM 0x52 b313
- Country Region from e2p = 101
- mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
- mt7615_antenna_default_reset(): DBDC 2G TxPath = 2, 2G RxPath = 2
- mt7615_antenna_default_reset(): DBDC 5G TxPath = 2, 2G RxPath = 2
- rtmp_read_txpwr_from_eeprom(243): Don't Support this now!
- RTMPReadTxPwrPerRate(1382): Don't Support this now!
- RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- RcRadioInit(): pRadioCtrl=87cc1450,Band=0,rfcap=3,channel=1,PhyMode=2
- MtCmdSetDbdcCtrl:(ret = 0)
- Band Rf: 1, Phy Mode: 2
- AntCfgInit(2787): Not support for HIF_MT yet!
- MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
- MtBfBackOffLoadTable: RF_LOCKDOWN Feature OFF !!!
- EEPROM Init Done!
- mt_mac_init()-->
- mt_mac_pse_init(2787): Don't Support this now!
- mt7615_init_mac_cr()-->
- mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
- mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c
- MtAsicSetMacMaxLen(1313): Not finish Yet!
- <--mt_mac_init()
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- MAC Init Done!
- MT7615BBPInit():BBP Initialization.....
- Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- MT7615BBPInit() todo
- PHY Init Done!
- tx_pwr_comp_init():NotSupportYet!
- MtCmdSetMacTxRx:(ret = 0)
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=14/14, support 14 channels
- WifiSysOpen(), wdev idx = 0
- wdev_attr_update(): wdevId0 = 78:32:xx:xx:96:fe
- MtCmdSetDbdcCtrl:(ret = 0)
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 0, AutoChannelFlag = 0
- ApAutoChannelAtBootUp<-----------------
- Current Channel is 6. DfsZeroWaitSupport=0
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=6
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=14/14, support 14 channels
- Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- [RadarStateCheck]Set into RD_NORMAL_MODE
- MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 0, BandIdx: 0
- MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0
- MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0
- mt7615_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=6, HT-CentCh=6, VHT-CentCh=0
- mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432] offset [2300]
- MtCmdGetRXDCOCCalResult:(ret = 0)
- mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- MtCmdGetTXDPDCalResult:(ret = 0)
- MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(0)
- :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- ap_phy_rrm_init_byRf(): AP Set CentralFreq at 6(Prim=6, HT-CentCh=6, VHT-CentCh=0, BBP_BW=0)
- LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
- MtAsicSetRalinkBurstMode(2618): Not support for HIF_MT yet!
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- MtAsicSetTxPreamble(2597): Not support for HIF_MT yet!
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2!
- AndesLedEnhanceOP: Success!
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = 78:32:xx:xx:96:fe
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- MtCmdSetMacTxRx:(ret = 0)
- fdb_enable()
- MCS Set = ff ff ff ff 00
- <==== mt_wifi_init, Status=0
- MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
- WDS_Init():
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- Total allocated 4 WDS interfaces!
- WtcSetMaxStaNum: MaxStaNum:87, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:125
- red_is_enabled: set CR4/N9 RED Enable to 1.
- cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- Correct apidx from 0 to 0 for WscUUIDInit
- Generate UUID for apidx(0)
- UUID: c0133764, len = 16
- 0x0000 :
- bc
- 32
- 9e
- 00
- 1d
- d8
- 11
- b2
- 86
- 01
- 78
- 32
- 1b
- 49
- 96
- fe
- WifiSysOpen(), wdev idx = 5
- MtCmdSetDbdcCtrl:(ret = 0)
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=6
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=6
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=14/14, support 14 channels
- br0: port 3(ra0) entered blocking state
- br0: port 3(ra0) entered disabled state
- device ra0 entered promiscuous mode
- br0: port 3(ra0) entered blocking state
- br0: port 3(ra0) entered forwarding state
- DriverOwn()::Return since already in Driver Own...
- ===============================
- Current DevInfo Num: 0
- ===============================
- ===============================
- Current BssInfo Num: 0
- ===============================
- ===============================
- Current StaRec Num: 0
- ===============================
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- E2pAccessMode=2
- SSID[0]=TELUS9134-5.0G, EdcaIdx=0
- cfg_mode=14
- cfg_mode=14
- wmode_band_equal(): Band Equal!
- [TxPower] BAND0: 100
- APEdca0
- APEdca1
- APEdca2
- APEdca3
- [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0
- rtmp_read_wds_from_file(): WDS Profile
- APWdsInitialize():WdsEntry[0]
- APWdsInitialize():WdsEntry[1]
- APWdsInitialize():WdsEntry[2]
- APWdsInitialize():WdsEntry[3]
- WDS-Enable mode=0
- HT: Ext Channel = BELOW
- WtcSetMaxStaNum: MaxStaNum:87, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:125
- Top Init Done!
- Use alloc_skb
- RX[0] DESC a6e3a000 size = 8192
- RX[1] DESC a6e3c000 size = 8192
- Hif Init Done!
- ctl->txq = c09a1748
- ctl->rxq = c09a1754
- ctl->ackq = c09a1760
- ctl->kickq = c09a176c
- ctl->tx_doneq = c09a1778
- ctl->rx_doneq = c09a1784
- mt7615_fw_prepare():FW(8a10), HW(8a10), CHIPID(7615))
- mt7615_fw_prepare(2754): MT7615_E3, USE E3 patch and ram code binary image
- AndesMTLoadRomMethodFwDlRing(1036), cap->rom_patch_len(10302)
- AndesRestartCheck: Current TOP_MISC2(0x1)
- AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
- 2
- 0
- 1
- 7
- 0
- 4
- 2
- 4
- 1
- 1
- 4
- 0
- 4
- 1
- a
- platform =
- A
- L
- P
- S
- hw/sw version =
- 8a
- 10
- 8a
- 10
- patch version =
- 00
- 00
- 00
- 10
- Patch SEM Status=2
- MtCmdPatchSemGet:(ret = 0)
- Patch is not ready && get semaphore success, SemStatus(2)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdPatchFinishReq
- EventGenericEventHandler: CMD Success
- Send checksum req..
- Patch SEM Status=3
- MtCmdPatchSemGet:(ret = 0)
- Release patch semaphore, SemStatus(3)
- AndesMTEraseRomPatch
- WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
- AndesMTLoadFwMethodFwDlRing(810), cap->fw_len(459240)
- Build Date:
- _
- 2
- 0
- 1
- 7
- 0
- 7
- 1
- 8
- 1
- 4
- 3
- 7
- Build Date:
- _
- 2
- 0
- 1
- 7
- 0
- 7
- 1
- 8
- 1
- 4
- 3
- 7
- AndesRestartCheck: Current TOP_MISC2(0x1)
- AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdFwStartReq: override = 1, address = 540672
- EventGenericEventHandler: CMD Success
- Build Date:
- _
- 2
- 0
- 1
- 6
- 1
- 2
- 3
- 0
- 1
- 0
- 1
- 1
- EventGenericEventHandler: CMD Success
- MtCmdAddressLenReq:(ret = 0)
- MtCmdFwStartReq: override = 4, address = 0
- EventGenericEventHandler: CMD Success
- WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
- MCU Init Done!
- efuse_probe: efuse = 10000212
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- RtmpEepromGetDefault::e2p_dafault=1
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000]
- NICReadEEPROMParameters():Calling eeinit
- NICReadEEPROMParameters: EEPROM 0x52 b313
- NICReadEEPROMParameters: EEPROM 0x52 b313
- Country Region from e2p = 101
- mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
- mt7615_antenna_default_reset(): DBDC 2G TxPath = 2, 2G RxPath = 2
- mt7615_antenna_default_reset(): DBDC 5G TxPath = 2, 2G RxPath = 2
- rtmp_read_txpwr_from_eeprom(243): Don't Support this now!
- RTMPReadTxPwrPerRate(1382): Don't Support this now!
- RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- RcRadioInit(): pRadioCtrl=87cc3450,Band=0,rfcap=3,channel=1,PhyMode=2
- MtCmdSetDbdcCtrl:(ret = 0)
- random: crng init done
- Band Rf: 1, Phy Mode: 2
- AntCfgInit(2787): Not support for HIF_MT yet!
- MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
- MtBfBackOffLoadTable: RF_LOCKDOWN Feature OFF !!!
- EEPROM Init Done!
- mt_mac_init()-->
- mt_mac_pse_init(2787): Don't Support this now!
- mt7615_init_mac_cr()-->
- mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
- mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c
- MtAsicSetMacMaxLen(1313): Not finish Yet!
- <--mt_mac_init()
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- MAC Init Done!
- MT7615BBPInit():BBP Initialization.....
- Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- MT7615BBPInit() todo
- PHY Init Done!
- tx_pwr_comp_init():NotSupportYet!
- MtCmdSetMacTxRx:(ret = 0)
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=49/49, support 24 channels
- WifiSysOpen(), wdev idx = 0
- wdev_attr_update(): wdevId0 = 78:32:xx:xx:96:ff
- MtCmdSetDbdcCtrl:(ret = 0)
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 1, AutoChannelFlag = 0
- ApAutoChannelAtBootUp<-----------------
- Current Channel is 1. DfsZeroWaitSupport=0
- MtAsicSetChBusyStat(865): Not support for HIF_MT yet!
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- MtCmdSetDbdcCtrl:(ret = 0)
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=36
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=49/49, support 24 channels
- RTMPSetPhyMode(): channel out of range, use first ch=36
- Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- [RadarStateCheck]Set into RD_NORMAL_MODE
- MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 0, BandIdx: 0
- MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0
- MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0
- mt7615_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=36, HT-CentCh=36, VHT-CentCh=36
- channel_adjust_bw_by_region: channel(36) wdev(0) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- mt7615_apply_dcoc() : reload Central CH [36] BW [0] from cetral freq [5190] offset [700]
- MtCmdGetRXDCOCCalResult:(ret = 0)
- mt7615_apply_dpd() : reload Central CH [36] BW [0] from cetral freq [5180] i[7] offset [2be8]
- MtCmdGetTXDPDCalResult:(ret = 0)
- MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 36 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(0)
- :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- ap_phy_rrm_init_byRf(): AP Set CentralFreq at 36(Prim=36, HT-CentCh=36, VHT-CentCh=36, BBP_BW=0)
- [WrapDfsRadarDetectStart]: Band0Ch is 36
- [WrapDfsRadarDetectStart]: Band1Ch is 0
- LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
- MtAsicSetRalinkBurstMode(2618): Not support for HIF_MT yet!
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- MtAsicSetTxPreamble(2597): Not support for HIF_MT yet!
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2!
- AndesLedEnhanceOP: Success!
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = 78:32:xx:xx:96:ff
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- MtCmdSetMacTxRx:(ret = 0)
- fdb_enable()
- MCS Set = ff ff ff ff 00
- <==== mt_wifi_init, Status=0
- MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
- WDS_Init():
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- The new WDS interface MAC = FF:FF:FF:FF:FF:FF
- MacTabMatchWCID = 0
- Total allocated 4 WDS interfaces!
- WtcSetMaxStaNum: MaxStaNum:87, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:125
- red_is_enabled: set CR4/N9 RED Enable to 1.
- cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- Correct apidx from 0 to 0 for WscUUIDInit
- Generate UUID for apidx(0)
- UUID: c0633764, len = 16
- 0x0000 :
- bc
- 32
- 9e
- 00
- 1d
- d8
- 11
- b2
- 86
- 01
- 78
- 32
- 1b
- 49
- 96
- fe
- WifiSysOpen(), wdev idx = 5
- MtCmdSetDbdcCtrl:(ret = 0)
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=36
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=36
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=49/49, support 24 channels
- br0: port 4(rai0) entered blocking state
- br0: port 4(rai0) entered disabled state
- device rai0 entered promiscuous mode
- br0: port 4(rai0) entered blocking state
- br0: port 4(rai0) entered forwarding state
- function start_hwmon not found
- wland: No such file or directory
- modprobe: FATAL: Module shortcut-fe not found in directory /lib/modules/4.14.21
- NET: Registered protocol family 10
- Segment Routing with IPv6
- Key is a ssh-rsa key
- cat: /proc/net/ip_conntrack_flush: No such file or directory
- Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
- cp: cannot stat '/tmp/mycron.d/*': No such file or directory
- 0
- cp: cannot stat '/jffs/mycron.d/*': No such file or directory
- cp: cannot stat '/mmc/mycron.d/*': No such file or directory
- /etc/config/eop-tunnel.firewall: line 16: [: -eq: unary operator expected
- iptables: No chain/target/match by that name.
- iptables: No chain/target/match by that name.
- iptables: No chain/target/match by that name.
- apcli0: No such process
- cat: /proc/net/ip_conntrack_flush: No such file or directory
- 0
- /etc/config/eop-tunnel.firewall: line 16: [: -eq: unary operator expected
- iptables: No chain/target/match by that name.
- iptables: No chain/target/match by that name.
- iptables: No chain/target/match by that name.
- process_monitor..done
- modprobe: FATAL: Module shortcut-fe not found in directory /lib/modules/4.14.21
- wland: No such file or directory
- (ApCliCtrlDisconnectReqAction) 2. Before do ApCliLinkDown. ifIndex = 0, bValid = 0
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=0, LED_CMD=0!
- AndesLedEnhanceOP: Success!
- WifiSysClose(), wdev idx = 0
- WifiSysGetBssInfoState(): BssInfoIdx 0 not found!!!
- WifiSysUpdateBssInfoState(): BssInfoIdx 0 not found!!!
- ap_ftkd> Release FT KDP Module...
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOff
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- (ApCliCtrlDisconnectReqAction) 2. Before do ApCliLinkDown. ifIndex = 0, bValid = 0
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=0, LED_CMD=0!
- AndesLedEnhanceOP: Success!
- WifiSysClose(), wdev idx = 0
- WifiSysGetBssInfoState(): BssInfoIdx 0 not found!!!
- WifiSysUpdateBssInfoState(): BssInfoIdx 0 not found!!!
- ap_ftkd> Release FT KDP Module...
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOff
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- MtAsicSetRalinkBurstMode(2618): Not support for HIF_MT yet!
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- MtAsicSetTxPreamble(2597): Not support for HIF_MT yet!
- WifiSysOpen(), wdev idx = 0
- wdev_attr_update(): wdevId0 = 78:32:xx:xx:96:fe
- MtCmdSetDbdcCtrl:(ret = 0)
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=6
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=6
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=14/14, support 14 channels
- Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- [RadarStateCheck]Set into RD_NORMAL_MODE
- MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 0, BandIdx: 0
- MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0
- MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0
- mt7615_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=6, HT-CentCh=6, VHT-CentCh=0
- mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432] offset [2300]
- MtCmdGetRXDCOCCalResult:(ret = 0)
- mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- MtCmdGetTXDPDCalResult:(ret = 0)
- MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(0)
- ap_phy_rrm_init_byRf(): AP Set CentralFreq at 6(Prim=6, HT-CentCh=6, VHT-CentCh=0, BBP_BW=0)
- LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2!
- AndesLedEnhanceOP: Success!
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = 78:32:xx:xx:96:fe
- ioctl SIOCGIFADDR: Cannot assign requested address
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- MtAsicSetRalinkBurstMode(2618): Not support for HIF_MT yet!
- MtAsicSetPiggyBack(802): Not support for HIF_MT yet!
- MtAsicSetTxPreamble(2597): Not support for HIF_MT yet!
- WifiSysOpen(), wdev idx = 0
- wdev_attr_update(): wdevId0 = 78:32:xx:xx:96:ff
- MtCmdSetDbdcCtrl:(ret = 0)
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=36
- HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=36
- CountryCode(2.4G/5G)=5/7, RFIC=25, PHY mode(2.4G/5G)=49/49, support 24 channels
- Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- [RadarStateCheck]Set into RD_NORMAL_MODE
- MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 0, BandIdx: 0
- MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0
- MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0
- mt7615_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=36, HT-CentCh=36, VHT-CentCh=36
- channel_adjust_bw_by_region: channel(36) wdev(0) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- channel_adjust_bw_by_region: channel(36) wdev(1) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- channel_adjust_bw_by_region: channel(36) wdev(2) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- channel_adjust_bw_by_region: channel(36) wdev(3) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- channel_adjust_bw_by_region: channel(36) wdev(4) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- channel_adjust_bw_by_region: channel(36) wdev(5) change bw from 0 to 2
- wlan_operate_set_ht_bw(): new ht_bw:1 > cap_ht_bw: 0, correct to cap_ht_bw
- mt7615_apply_dcoc() : reload Central CH [36] BW [0] from cetral freq [5190] offset [700]
- MtCmdGetRXDCOCCalResult:(ret = 0)
- mt7615_apply_dpd() : reload Central CH [36] BW [0] from cetral freq [5180] i[7] offset [2be8]
- MtCmdGetTXDPDCalResult:(ret = 0)
- MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 36 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(0)
- ap_phy_rrm_init_byRf(): AP Set CentralFreq at 36(Prim=36, HT-CentCh=36, VHT-CentCh=36, BBP_BW=0)
- [WrapDfsRadarDetectStart]: Band0Ch is 36
- [WrapDfsRadarDetectStart]: Band1Ch is 0
- LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
- RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2!
- AndesLedEnhanceOP: Success!
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = 78:32:xx:xx:96:ff
- /opt/etc/init.d/rcS: No such file or directory
- /jffs/etc/init.d/rcS: No such file or directory
- /mmc/etc/init.d/rcS: No such file or directory
- rmmod: ERROR: Module eoip is not currently loaded
- /etc/config/eop-tunnel.startup: line 18: [: -eq: unary operator expected
- proxywatchdog.sh: no process found
- /mnt/smbshare
- umount: /mnt/smbshare: no mount point specified.
- rmmod: ERROR: Module cifs is not currently loaded
- rmmod: ERROR: Module fscache is not currently loaded
- schedulerb.sh: no process found
- shatd: no process found
- wdswatchdog.sh: no process found
- The Milkfish Router Services
- ERROR: Necessary service setting not found: milkfish_username - aborting.
- The Milkfish Router Services
- Restoring SIP ddsubscriber database from NVRAM...
- Empty.
- The Milkfish Router Services
- Restoring SIP ddaliases database from NVRAM...
- Empty.
- DD-WRT login: root
- Password:
- ==========================================================
- ___ ___ _ _____ ______ ___ __ ___
- / _ \/ _ \___| | /| / / _ \/_ __/__ __.`, /-` /.`, /
- / // / // /___/ |/ |/ / , _/ / / \ \/ /_``_// //_``_/
- /____/____/ |__/|__/_/|_| /_/ \__/ /_/(_)_//_/
- DD-WRT v4.14
- Wireless Liberty
- http://www.dd-wrt.com
- -----
- This version has been brought to you by:
- __ __ _____ _____ _ ____ ______ _____ _ __
- | \ / || ___|| __ \ | | / __ \ |__ __|| ___|| | / /
- | ^ || |__ | | \ \| || | | | | | | |__ | |/ /
- | | | || ___|| | | || || '--' | | | | ___|| \
- | | | || |___ | |__/ /| || |--| | | | | |___ | |\ \
- |__| |__||_____||_____/ |_||_| |_| |_| |_____||_| \_\
- Everyday Genius.
- -----
- "It takes Everyday Genius to attain Wireless Liberty"
- ~Anon
- ======*insert graffiti expressing 'Ralf r00lz!1!1!'*======
- root@DD-WRT:~# ifconfig
- apcli0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::xx22:xxff:fe49:96fe prefixlen 64 scopeid 0x20<link>
- ether 7e:22:xx:xx:96:fe txqueuelen 1000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 0 bytes 0 (0.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- apclii0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7c22:xxff:fexx:96ff prefixlen 64 scopeid 0x20<link>
- ether 7e:22:xx:xx:96:ff txqueuelen 1000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 0 bytes 0 (0.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
- inet6 fe80::7a32:xxff:fexx:96fd prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:fd txqueuelen 1000 (Ethernet)
- RX packets 46 bytes 2116 (2.0 KiB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 31 bytes 1766 (1.7 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- eth2: flags=4931<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7a32:xxff:fexx:96fd prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:fd txqueuelen 1000 (Ethernet)
- RX packets 54 bytes 3466 (3.3 KiB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 131 bytes 9776 (9.5 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- device interrupt 21
- lo: flags=4169<UP,LOOPBACK,RUNNING,MULTICAST> mtu 65536 metric 1
- inet 127.0.0.1 netmask 255.0.0.0
- inet6 ::1 prefixlen 128 scopeid 0x10<host>
- loop txqueuelen 1000 (Local Loopback)
- RX packets 6 bytes 384 (384.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 6 bytes 384 (384.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- ra0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7a32:xxff:fexx:96fe prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:fe txqueuelen 3000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 0 bytes 0 (0.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- device interrupt 23
- rai0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7a32:xxff:fexx:96ff prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:ff txqueuelen 3000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 0 bytes 0 (0.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- device interrupt 24
- vlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7a32:xxff:fexx:96fd prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:fd txqueuelen 1000 (Ethernet)
- RX packets 46 bytes 2116 (2.0 KiB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 39 bytes 2422 (2.3 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- vlan2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet6 fe80::7a32:xxff:fexx:96fd prefixlen 64 scopeid 0x20<link>
- ether 78:32:xx:xx:96:fd txqueuelen 1000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 84 bytes 5122 (5.0 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- root@DD-WRT:~# free
- total used free shared buffers cached
- Mem: 118704 71072 47632 288 8756 16116
- -/+ buffers/cache: 46200 72504
- Swap: 0 0 0
- root@DD-WRT:~# modprobe wireguard
- root@DD-WRT:~# rmmod wireguard
- root@DD-WRT:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement