Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-37-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 2.5" HDD MQ04UBD...
- Device Model: TOSHIBA MQ04UBD200
- Serial Number: 31IHT189T
- LU WWN Device Id: 0 000000 000000000
- Firmware Version: JT0B0U
- User Capacity: 2.000.398.934.016 bytes [2,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Thu Oct 7 09:06:36 2021 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Disabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 338) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
- 2 Throughput_Performance P-S--- 100 100 050 - 0
- 3 Spin_Up_Time POS--K 100 100 001 - 2286
- 4 Start_Stop_Count -O--CK 100 100 000 - 5
- 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
- 7 Seek_Error_Rate PO-R-- 100 100 050 - 0
- 8 Seek_Time_Performance P-S--- 100 100 050 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 0
- 10 Spin_Retry_Count PO--CK 100 100 030 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 5
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2
- 193 Load_Cycle_Count -O--CK 100 100 000 - 7
- 194 Temperature_Celsius -O---K 100 100 000 - 21 (Min/Max 20/29)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O--CK 100 100 000 - 0
- 198 Offline_Uncorrectable ----CK 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0
- 220 Disk_Shift -O---- 100 100 000 - 0
- 222 Loaded_Hours -O--CK 100 100 000 - 0
- 223 Load_Retry_Count -O--CK 100 100 000 - 0
- 224 Load_Friction -O---K 100 100 000 - 0
- 226 Load-in_Time -OS--K 100 100 000 - 263
- 240 Head_Flying_Hours P----- 100 100 001 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 51 Comprehensive SMART error log
- 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x0a GPL R/W 2 Device Statistics Notification
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x24 GPL R/O 32768 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa7 GPL VS 8 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 1 (0x0001)
- Device State: Active (0)
- Current Temperature: 21 Celsius
- Power Cycle Min/Max Temperature: 20/21 Celsius
- Lifetime Min/Max Temperature: 20/29 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: 0/60 Celsius
- Temperature History Size (Index): 478 (2)
- Index Estimated Time Temperature Celsius
- 3 2021-10-07 01:09 ? -
- ... ..(476 skipped). .. -
- 2 2021-10-07 09:06 ? -
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 5 --- Lifetime Power-On Resets
- 0x01 0x010 4 0 --- Power-on Hours
- 0x01 0x018 6 20955 --- Logical Sectors Written
- 0x01 0x020 6 199 --- Number of Write Commands
- 0x01 0x028 6 125041 --- Logical Sectors Read
- 0x01 0x030 6 1118 --- Number of Read Commands
- 0x01 0x038 6 81146 --- Date and Time TimeStamp
- 0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
- 0x02 0x010 4 0 --- Overlimit Shock Events
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 0 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 0 --- Head Flying Hours
- 0x03 0x018 4 7 --- Head Load Events
- 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 2 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 21 --- Current Temperature
- 0x05 0x010 1 - N-- Average Short Term Temperature
- 0x05 0x018 1 - N-- Average Long Term Temperature
- 0x05 0x020 1 29 --- Highest Temperature
- 0x05 0x028 1 20 --- Lowest Temperature
- 0x05 0x030 1 - N-- Highest Average Short Term Temperature
- 0x05 0x038 1 - N-- Lowest Average Short Term Temperature
- 0x05 0x040 1 - N-- Highest Average Long Term Temperature
- 0x05 0x048 1 - N-- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 1 --- Number of Hardware Resets
- 0x06 0x010 4 5 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 4 0 Command failed due to ICRC error
- 0x0002 4 0 R_ERR response for data FIS
- 0x0003 4 0 R_ERR response for device-to-host data FIS
- 0x0004 4 0 R_ERR response for host-to-device data FIS
- 0x0005 4 0 R_ERR response for non-data FIS
- 0x0006 4 0 R_ERR response for device-to-host non-data FIS
- 0x0007 4 0 R_ERR response for host-to-device non-data FIS
- 0x0008 4 0 Device-to-host non-data FIS retries
- 0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
- 0x000b 4 0 CRC errors within host-to-device FIS
- 0x000d 4 0 Non-CRC errors within host-to-device FIS
- 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement