Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29 (kszaq@cvm) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP Sat Sep 23 23:03:37 CEST 2017
- [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000@0] no prop version_code
- [ 0.000000@0] bootconsole [earlycon0] enabled
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,meson-fb: 0x000000007d100000 - 0x000000007f100000 (32 MiB)
- [ 0.000000@0] linux,di: 0x000000007b300000 - 0x000000007d100000 (30 MiB)
- [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007b300000, size 30 MiB
- [ 0.000000@0] linux,ion-dev: 0x0000000078300000 - 0x000000007b300000 (48 MiB)
- [ 0.000000@0] linux,vdin1_cma: 0x0000000077000000 - 0x0000000078000000 (16 MiB)
- [ 0.000000@0] cma: Reserved 16 MiB at 77000000, total cma pages:4096
- [ 0.000000@0] linux,ppmgr: 0x0000000078300000 - 0x0000000078300000 (0 MiB)
- [ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
- [ 0.000000@0] cma: Reserved 192 MiB at 67c00000, total cma pages:53248
- [ 0.000000@0] linux,picdec: 0x0000000078300000 - 0x0000000078300000 (0 MiB)
- [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
- [ 0.000000@0] linux,codec_mm_reserved: 0x0000000063b00000 - 0x0000000067c00000 (65 MiB)
- [ 0.000000@0] fdt Reserved memory total: 387 MiB
- [ 0.000000@0] cma: Reserved 8 MiB at 76800000, total cma pages:55296
- [ 0.000000@0] On node 0 totalpages: 510976
- [ 0.000000@0] Normal zone: 11000 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 510976 pages, LIFO batch:31
- [ 0.000000@0] psci: probing function IDs from device-tree
- [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07829f000 s17216 r8192 d23744 u49152
- [ 0.000000@0] pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 499976
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,2160p30hz maxcpus=4 vout=2160p30hz,enable hdmimode=2160p30hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.ddrclk=792MHz androidboot.hardware=amlogic mac=06:41:70:82:27:06 androidboot.mac=06:41:70:82:27:06 androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_status=auto noswap
- [ 0.000000@0] logo: osd1
- [ 0.000000@0] logo: loaded
- [ 0.000000@0] logo: 0x3d800000
- [ 0.000000@0] logo: 2160p30hz
- [ 0.000000@0] vout_serve: 2160p30hz
- [ 0.000000@0] vout_serve: en: 1
- [ 0.000000@0] vout_serve: set_vout_init_vmode: 2160p30hz
- [ 0.000000@0] vout_serve: 2160p30hz
- [ 0.000000@0] vout_serve: enable: 1
- [ 0.000000@0] logo: get hdmimode: 2160p30hz
- [ 0.000000@0] logo: get cvbsmode: 576cvbs
- [ 0.000000@0] tv_vout: cvbs performance line = 0
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000@0] Memory: 1609296K/2043904K available (6989K kernel code, 808K rwdata, 2664K rodata, 912K init, 2922K bss, 434608K reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042b0d800 ( 42 MB)
- [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07d100000 ( 2001 MB)
- [ 0.000000@0] .init : 0xffffffc0019ef000 - 0xffffffc001ad3340 ( 913 kB)
- [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc0019ee684 ( 9658 kB)
- [ 0.000000@0] .data : 0xffffffc001ad4000 - 0xffffffc001b9e1c8 ( 809 kB)
- [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019edfff]
- [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] arch_multi_cluster:0
- [ 0.000000@0] Hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.008245@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.016772@0] Console: colour dummy device 80x25
- [ 0.021087@0] console [tty0] enabled
- [ 0.024672@0] bootconsole [earlycon0] disabled
- [ 0.032270@0] allocated 8388608 bytes of page_cgroup
- [ 0.032282@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.032306@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.032324@0] pid_max: default: 32768 minimum: 301
- [ 0.032470@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.032484@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.037506@0] Initializing cgroup subsys memory
- [ 0.037549@0] Initializing cgroup subsys devices
- [ 0.037559@0] Initializing cgroup subsys freezer
- [ 0.037569@0] Initializing cgroup subsys blkio
- [ 0.037617@0] ftrace: allocating 23813 entries in 94 pages
- [ 0.062031@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.062060@0] /cpus/cpu@1: Missing clock-frequency property
- [ 0.062072@0] /cpus/cpu@2: Missing clock-frequency property
- [ 0.062083@0] /cpus/cpu@3: Missing clock-frequency property
- [ 0.063613@0] Meson chip version = RevB (21:B - A2:0)
- [ 0.064060@1] CPU1: Booted secondary processor
- [ 0.064435@2] CPU2: Booted secondary processor
- [ 0.064758@3] CPU3: Booted secondary processor
- [ 0.064825@0] Brought up 4 CPUs
- [ 0.064861@0] SMP: Total of 4 processors activated.
- [ 0.065370@0] devtmpfs: initialized
- [ 0.072445@0] instabooting: 0
- [ 0.081332@0] cma: cma_init_reserved_areas, use_cma_first:1
- [ 0.081424@0] pinctrl core: initialized pinctrl subsystem
- [ 0.082063@0] regulator-dummy: no parameters
- [ 0.082739@0] NET: Registered protocol family 16
- [ 0.085192@0] aml_vdac_init: module init
- [ 0.085334@0] register canvas platform driver
- [ 0.085410@0] register rdma platform driver
- [ 0.086927@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001adc000
- [ 0.087295@0] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.088889@0] software IO TLB [mem 0x61c00000-0x62000000] (4MB) mapped at [ffffffc061c00000-ffffffc061ffffff]
- [ 0.089336@0] aml_i2c version: 20140813
- [ 0.089547@0] i2c-core: driver [pmu4] using legacy resume method
- [ 0.089619@0] codec_mm:codec_mm_module_init
- [ 0.089902@0] gxbb_mpll_clk: register mpll_clk_out0 success done
- [ 0.089919@0] gxbb_mpll_clk: register mpll_clk_out1 success done
- [ 0.089931@0] gxbb_mpll_clk: register mpll_clk_out2 success done
- [ 0.090130@0] clk_sys: register PLL sys_pll success done
- [ 0.090148@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.090158@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.090167@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.090176@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.090186@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.090195@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.090204@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.090212@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.090221@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.090255@0] gxl_clk: clock initialization complete
- [ 0.090455@0] clkmsr: Gxl msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
- [ 0.092655@0] aml_iomap: amlogic iomap probe done
- [ 0.093092@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
- [ 0.093929@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.094459@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
- [ 0.094491@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
- [ 0.094645@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
- [ 0.094668@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
- [ 0.098639@0] codec_mm has 2 memory regions
- [ 0.098692@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.098711@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.098815@0] codec_mm has 2 memory regions
- [ 0.098835@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.098851@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.100513@0] vpu: driver version: v03
- [ 0.100556@0] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.100645@0] vpu: vpu_probe OK
- [ 0.101922@0] tv_vout: tvout_probe
- [ 0.101947@0] tv_vout: chrdev devno 266338304 for disp
- [ 0.101956@0] vout_notify: vout_register_server
- [ 0.101964@0] tv_vout: register tv module server ok
- [ 0.102191@0] tv_vout: create cdev tv
- [ 0.102207@0] tv_vout: tvout_probe OK
- [ 0.102685@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.102718@0] canvas maped reg_base =ffffff800007e000
- [ 0.106416@0] rdma_probe
- [ 0.318684@0] bio: create slab <bio-0> at 0
- [ 0.319546@0] SCSI subsystem initialized
- [ 0.320064@0] usbcore: registered new interface driver usbfs
- [ 0.320158@0] usbcore: registered new interface driver hub
- [ 0.320277@0] usbcore: registered new device driver usb
- [ 0.320986@0] i2c-gpio i2c_gpio.38: using pins 172 (SDA) and 173 (SCL)
- [ 0.321172@0] pps_core: LinuxPPS API ver. 1 registered
- [ 0.321186@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.321255@0] PTP clock support registered
- [ 0.321631@0] hdmitx: system: amhdmitx_init
- [ 0.321644@0] hdmitx: system: Ver: 2014May6
- [ 0.321823@0] hdmitx: system: amhdmitx_probe
- [ 0.322132@0] hdmitx: system: not find match init-data
- [ 0.322183@0] hdmitx hpd irq = 89
- [ 0.322734@0] hdmitx20: Mapped PHY: 0xc0800000
- [ 0.322755@0] hdmitx20: Mapped PHY: 0xc1104400
- [ 0.322780@0] hdmitx20: Mapped PHY: 0xc8100000
- [ 0.322789@0] hdmitx20: Mapped PHY: 0xc8834000
- [ 0.322798@0] hdmitx20: Mapped PHY: 0xc883a000
- [ 0.322807@0] hdmitx20: Mapped PHY: 0xc883c000
- [ 0.322820@0] hdmitx20: Mapped PHY: 0xd0100000
- [ 0.322829@0] hdmitx20: Mapped PHY: 0xda83a000
- [ 0.322845@0] hdmitx: alread display in uboot 0x15f
- [ 0.322887@0] avmute set to 1
- [ 0.323218@0] vout_serve: vout_init_module
- [ 0.323351@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=21
- [ 0.323363@0] tv_vout: mode is 21,sync_duration_den=1,sync_duration_num=30
- [ 0.323381@0] tv_vout: already display in uboot
- [ 0.323390@0] vout_serve: vinfo mode is: 2160p30hz
- [ 0.323399@0] vout_serve: init mode 2160p30hz
- [ 0.323637@0] vout_serve: create_vout_fops OK
- [ 0.323649@0] vout_serve: create vout attribute OK
- [ 0.323656@0] vout_serve: meson_vout_probe OK
- [ 0.323837@0] logo: logo_init
- [ 0.324099@0] osd_rdma: osd_rdma_init: rdma_table p=0x76841000,op=0x76841000 , v=0xffffff80001b1000
- [ 0.324130@0] rdma_register, rdma_table_addr ffffff80001b3000 rdma_table_addr_phy 76842000 reg_buf ffffffc000218000
- [ 0.324144@0] rdma_register success, handle 1 table_size 4096
- [ 0.324153@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
- [ 0.324174@0] rdma_register, rdma_table_addr ffffff80001b5000 rdma_table_addr_phy 76843000 reg_buf ffffffc000219000
- [ 0.324188@0] rdma_register success, handle 2 table_size 4096
- [ 0.324196@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
- [ 0.324642@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.326996@0] Switched to clocksource arch_sys_counter
- [ 0.329941@0] hdmitx: system: irq 2
- [ 0.336379@0] FS-Cache: Loaded
- [ 0.345419@0] NET: Registered protocol family 2
- [ 0.345948@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.346078@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.346310@0] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.346409@0] TCP: reno registered
- [ 0.346427@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.346476@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.346719@0] NET: Registered protocol family 1
- [ 0.347295@0] pwm: probe ok
- [ 0.347563@0] wifi: power_on_pin_OD = 0;
- [ 0.347581@0] aml_wifi wifi.33: [wifi_dev_probe] no power_on_pin2
- [ 0.347619@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
- [ 0.347634@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
- [ 0.347647@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
- [ 0.347660@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
- [ 0.347673@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
- [ 0.347685@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
- [ 0.347698@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
- [ 0.347710@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.347738@0] aml_wifi wifi.33: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.347790@0] aml_wifi wifi.33: [wifi_dev_probe] dhd_static_buf setup
- [ 0.347874@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
- [ 0.347888@0] aml_wifi wifi.33: [wifi_dev_probe] interrupt_pin=241
- [ 0.347899@0] aml_wifi wifi.33: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 0.347912@0] aml_wifi wifi.33: [wifi_dev_probe] power_on_pin=240
- [ 0.347922@0] aml_wifi wifi.33: [wifi_dev_probe] clock_32k_pin=0
- [ 0.348205@0] aml_wifi wifi.33: [wifi_setup_dt] wifi_setup_dt
- [ 0.348249@0] aml_wifi wifi.33: [wifi_setup_dt] interrupt_pin(241)
- [ 0.348267@0] aml_wifi wifi.33: [wifi_setup_dt] power_on_pin(240)
- [ 0.348464@0] Unpacking initramfs...
- [ 0.401922@0] Freeing initrd memory: 2004K (ffffffc073ca9000 - ffffffc073e9e000)
- [ 0.404769@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.413316@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.413780@0] msgmni has been set to 3579
- [ 0.414849@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.414952@0] io scheduler noop registered
- [ 0.414965@0] io scheduler deadline registered
- [ 0.414992@0] io scheduler cfq registered (default)
- [ 0.415815@0] meson-rng c8834000.rng: hwrng registered
- [ 0.419457@0] loop: module loaded
- [ 0.421232@0] tun: Universal TUN/TAP device driver, 1.6
- [ 0.421256@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.425271@0] libphy: stmmac: probed
- [ 0.425297@0] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
- [ 0.425704@0] PPP generic driver version 2.4.2
- [ 0.425957@0] NET: Registered protocol family 24
- [ 0.426081@0] usbcore: registered new interface driver smsc95xx
- [ 0.426426@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
- [ 0.426561@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.426587@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 0.426806@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.427212@0] usbcore: registered new interface driver usb-storage
- [ 0.427418@0] usbcore: registered new interface driver usbserial
- [ 0.427500@0] usbcore: registered new interface driver usbserial_generic
- [ 0.427585@0] usbserial: USB Serial support registered for generic
- [ 0.427668@0] usbcore: registered new interface driver pl2303
- [ 0.427745@0] usbserial: USB Serial support registered for pl2303
- [ 0.428296@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001d4000
- [ 0.428490@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.428519@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001d6080
- [ 0.428825@0] mousedev: PS/2 mouse device common for all mice
- [ 0.429048@0] i2c /dev entries driver
- [ 0.430094@0] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.430267@0] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.432495@0] usbcore: registered new interface driver usbhid
- [ 0.432519@0] usbhid: USB HID core driver
- [ 0.432785@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001d84c0
- [ 0.432822@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 0.432846@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 1.907082@3] console [ttyS0] enabled
- [ 1.907218@0] hdmitx: plugin
- [ 1.914019@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001da4c0
- [ 1.920647@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 1.931325@1] hdmitx: system: hdmitx_hdcp_init
- [ 1.934947@1] aml_vrtc rtc.32: rtc core: registered aml_vrtc as rtc0
- [ 1.940920@1] secmon has 1 memory regions
- [ 1.944607@1] secmon: share in base: 0xffffff80001ec000, share out base: 0xffffff80001ee000
- [ 1.952884@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 1.959848@1] secmon: probe done
- [ 1.962946@0] EDID Parser:
- [ 1.966128@0] hdmitx: get dtd0 vic: 97
- [ 1.966172@1] storage: storage in base: 0xffffff8001600000
- [ 1.966174@1] storage: storage out base: 0xffffff8001680000
- [ 1.966175@1] storage: storage block base: 0xffffff8001700000
- [ 1.966176@1] storage: probe done!
- [ 1.966697@1] aml_sd_emmc_probe: line 3594
- [ 1.966701@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 2.003046@0] hdmitx: edid: find IEEEOUT
- [ 2.006760@0] hdmitx: edid: check sum valid
- [ 2.010904@0] hdmitx: edid: check sum valid
- [ 2.015058@0] hdmitx: update RX hdr info 0
- [ 2.015223@1] aml_sd_emmc_reg_init 1149
- [ 2.015302@1] get property: ocr_avail, value:0x00200080
- [ 2.015305@1] get property: f_min, value:300000
- [ 2.015308@1] get property: f_max, value:100000000
- [ 2.015311@1] get property: max_req_size, value:0x00020000
- [ 2.015319@1] get property: pinname, str:emmc
- [ 2.015323@1] get property: card_type, value:1
- [ 2.015350@1] get property: gpio_dat3, str:
- [ 2.015353@1] get property: hw_reset, str:
- [ 2.015380@1] emmc:pdata->caps = c0000d47
- [ 2.015385@1] emmc:pdata->caps2 = 18060
- [ 2.015388@1] emmc:pdata->pm_caps = 0
- [ 2.015401@1] storage 1, boot 1
- [ 2.015403@1] get_storage_dev return 1
- [ 2.046968@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.052348@1] aml_sd_emmc_probe: line 3594
- [ 2.052724@1] aml_sd_emmc_reg_init 1149
- [ 2.052785@1] get property: ocr_avail, value:0x00200080
- [ 2.052789@1] get property: f_min, value:400000
- [ 2.052791@1] get property: f_max, value:100000000
- [ 2.052795@1] get property: max_req_size, value:0x00020000
- [ 2.052797@1] get property: irq_in, value:3
- [ 2.052800@1] get property: irq_out, value:5
- [ 2.052817@1] get property: gpio_cd, str:
- [ 2.052821@1] get property: pinname, str:sd
- [ 2.052824@1] get property: jtag_pin, str:
- [ 2.052829@1] get property: card_type, value:5
- [ 2.052832@1] get property: gpio_dat3, str:
- [ 2.052847@1] sd:pdata->caps = 7
- [ 2.052849@1] sd:pdata->caps2 = 0
- [ 2.052851@1] sd:pdata->pm_caps = 0
- [ 2.087132@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.087170@1] aml_sd_emmc_probe: line 3594
- [ 2.087505@1] aml_sd_emmc_reg_init 1149
- [ 2.087568@1] get property: ocr_avail, value:0x00200080
- [ 2.087571@1] get property: f_min, value:400000
- [ 2.087573@1] get property: f_max, value:200000000
- [ 2.087576@1] get property: max_req_size, value:0x00020000
- [ 2.087582@1] get property: pinname, str:sdio
- [ 2.087586@1] get property: card_type, value:3
- [ 2.087619@1] sdio:pdata->caps = 7810f
- [ 2.087621@1] sdio:pdata->caps2 = 0
- [ 2.087624@1] sdio:pdata->pm_caps = 1
- [ 2.126968@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.127352@1] ion_dev has 1 memory regions
- [ 2.131441@1] fb: osd_init_module
- [ 2.131603@1] fb: viu vsync irq: 35
- [ 2.131611@1] meson-fb has 1 memory regions
- [ 2.131660@1] meson-fb meson-fb.15: assigned reserved memory node linux,meson-fb ok
- [ 2.131680@1] fb: osd_probe vinfo:ffffffc001b39a28
- [ 2.131686@1] fb: init fbdev bpp is:32
- [ 2.275083@0] hdmitx: edid: check sum valid
- [ 2.275087@3] [aml_is_card_insert] card IN
- [ 2.283194@0] hdmitx: edid: check sum valid
- [ 2.283244@1] fb: set osd0 reverse as NONE
- [ 2.293634@1] fb: osd probe OK
- [ 2.294597@1] ge2d: ge2d_init_module
- [ 2.297869@1] ge2d: ge2d_dev major:243
- [ 2.301945@1] ge2d: ge2d clock is 400 MHZ
- [ 2.305530@1] ge2d: ge2d: pdev=ffffffc000265000, irq=182, rstc=0xffffffc0616bf700, clk=ffffffc00017ed00
- [ 2.314904@1] ge2d: mapped phy: 0xd0160000
- [ 2.318906@1] ge2d: ge2d start monitor
- [ 2.322685@2] ge2d: ge2d workqueue monitor start
- [ 2.323148@1] codec:Amlogic A/V streaming port init
- [ 2.325064@1] codec:get gate demux control ok ffffffc0616a0fc0
- [ 2.325080@1] codec:get gate parser_top control ok ffffffc0616a3040
- [ 2.325084@1] codec:get gate vpu_intr control ok ffffffc0616a30c0
- [ 2.325089@1] codec:get gate vdec control ok ffffffc0616a3140
- [ 2.356454@1] codec:[tsync_pcr_init]init success.
- [ 2.360540@1] codec:amvideocap_probe,amvideocap
- [ 2.364870@1] codec:use cma buf.
- [ 2.370297@1] codec:vdec_request_irq ffffffc0015524d8, vsync
- [ 2.373884@1] codec:create_ge2d_work_queue video task ok
- [ 2.376393@3] normal card in
- [ 2.376469@0] hdmitx: edid: blk0 raw data
- [ 2.376507@0] 00ffffffffffff004c2dd00c56534d302019010380341d782a1255a9544d9f25
- [ 2.376507@0] 0c5054bfef80714f810081c081809500a9c0b300010108e80030f2705a80b058
- [ 2.376507@0] 8a0009252100001e000000fd00184b1e873c000a202020202020000000fc0055
- [ 2.376507@0] 3234453835300a2020202020000000ff00485448473830303033330a20200106
- [ 2.376507@0]
- [ 2.376507@0]
- [ 2.376511@0] hdmitx: edid: blk1 raw data
- [ 2.376546@0] 020334f04d611203130420221f105f605d5e23090707830100006d030c001000
- [ 2.376546@0] 803c20106001020367d85dc401788003e30f0104023a801871382d40582c4500
- [ 2.376546@0] 09252100001e023a80d072382d40102c458009252100001e011d007251d01e20
- [ 2.376546@0] 6e28550009252100001e565e00a0a0a029503020350009252100001a000000b0
- [ 2.376546@0]
- [ 2.376546@0]
- [ 2.376578@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 2.376589@0] hdmitx: video: get current mode: 2160p30hz
- [ 2.376591@0] hdmitx: update rx hdr info 0
- [ 2.376593@0] hdmitx: update physcial size: 520 290
- [ 2.376613@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 95
- [ 2.376620@0] hdmtix: set audio
- [ 2.376630@0] hdmitx tx_aud_src = 0
- [ 2.376656@0] hdmitx: fs = 0, cd = 4, tmds_clk = 297000
- [ 2.376658@0] hdmitx aud_n_para = 5120
- [ 2.376675@0] hdmitx set channel status
- [ 2.467193@2] emmc: BKOPS_EN bit is not set
- [ 2.477563@2] emmc: trying cali 0-th time(s)
- [ 2.483185@2] emmc: delay[0]= 2400 padding= 3, bidx=2
- [ 2.483187@2] emmc: delay[1]= 2600 padding= 2, bidx=2
- [ 2.483189@2] emmc: delay[2]= 2400 padding= 3, bidx=2
- [ 2.483191@2] emmc: delay[3]= 2600 padding= 2, bidx=2
- [ 2.483194@2] emmc: delay[4]= 2800 padding= 1, bidx=2
- [ 2.483196@2] emmc: delay[5]= 2400 padding= 3, bidx=2
- [ 2.483198@2] emmc: delay[6]= 2800 padding= 1, bidx=2
- [ 2.483200@2] emmc: delay[7]= 2600 padding= 2, bidx=2
- [ 2.483202@2] emmc: calibration result @ 0: max(2800), min(2400)
- [ 2.483206@2] emmc: line_delay =0x10201212, max_cal_result =2800
- [ 2.483208@2] emmc: base_index_max 2, base_index_min 2
- [ 2.483214@2] emmc: clk 100000000 SDR mode tuning start
- [ 2.483631@2] emmc: rx_tuning_result[0] = 10
- [ 2.483928@2] emmc: rx_tuning_result[1] = 10
- [ 2.484221@2] emmc: rx_tuning_result[2] = 10
- [ 2.484514@2] emmc: rx_tuning_result[3] = 10
- [ 2.484806@2] emmc: rx_tuning_result[4] = 10
- [ 2.485099@2] emmc: rx_tuning_result[5] = 10
- [ 2.485392@2] emmc: rx_tuning_result[6] = 10
- [ 2.485684@2] emmc: rx_tuning_result[7] = 10
- [ 2.485977@2] emmc: rx_tuning_result[8] = 10
- [ 2.486271@2] emmc: rx_tuning_result[9] = 10
- [ 2.486274@2] emmc: best_win_start =0, best_win_size =10
- [ 2.486278@2] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
- [ 2.486281@2] emmc: gclock =0x100024a, gdelay=0x10201212, gadjust=0x2000
- [ 2.487016@2] emmc: no support driver strength type 1 and 4
- [ 2.487359@2] emmc: try set sd/emmc to DDR mode
- [ 2.487363@2] emmc: try set sd/emmc to DDR mode
- [ 2.487700@2] emmc: new HS400 MMC card at address 0001
- [ 2.651265@0] emmc: clock 100000000, 8-bit-bus-width
- [ 2.651265@0]
- [ 2.651266@0] mmcblk0: emmc:0001 SDW16G 14.6 GiB
- [ 2.662406@0] mmcblk0boot0: emmc:0001 SDW16G partition 1 4.00 MiB
- [ 2.668476@1] rdma_register, rdma_table_addr ffffff800040e000 rdma_table_addr_phy 76850000 reg_buf ffffffc061710000
- [ 2.668480@0] mmcblk0boot1: emmc:0001 SDW16G partition 2 4.00 MiB
- [ 2.668665@0] mmcblk0rpmb: emmc:0001 SDW16G partition 3 4.00 MiB
- [ 2.690499@1] rdma_register success, handle 3 table_size 32768
- [ 2.695082@0] mmcblk0: unknown partition table
- [ 2.695947@2] [mmc_read_partition_tbl] mmc read partition OK!
- [ 2.695948@2] add_emmc_partition
- [ 2.696288@0] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 2.696465@0] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 2.696602@0] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 2.696756@0] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 2.696896@0] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 2.697116@0] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 2.697260@0] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 2.697396@0] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 2.697525@0] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 2.697670@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 2.697804@0] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
- [ 2.697993@0] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
- [ 2.698128@0] [mmcblk0p13] data offset 0x0000b7400000, size 0x0002f4000000
- [ 2.698170@0] card key: card_blk_probe.
- [ 2.698175@0] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 2.698179@0] emmc key: emmc_key_init:552 ok.
- [ 2.700977@2] amlmmc_dtb_init: register dtb chardev
- [ 2.700977@2] calc a82c9e70, store a82c9e70
- [ 2.703587@2] calc a82c9e70, store a82c9e70
- [ 2.703591@2] total valid 2
- [ 2.704278@0] amlmmc_dtb_init: register dtb chardev OK
- [ 2.704278@0] Exit aml_emmc_partition_ops OK.
- [ 2.705980@0] mmcblk0boot1: unknown partition table
- [ 2.707312@0] mmcblk0boot0: unknown partition table
- [ 2.707682@0] clear_emmc_wait_flag
- [ 2.750097@3] sd: new high speed SD card at address 1234
- [ 2.750745@3] sd: clock 50000000, 4-bit-bus-width
- [ 2.750745@3]
- [ 2.750746@3] mmcblk1: sd:1234 SA02G 1.83 GiB
- [ 2.753409@3] mmcblk1: p1 p2
- [ 2.890766@1] video_rdma:rdma_init video rdma handle = 3.
- [ 2.896103@0] codec:used fix clk for vdec clk source!
- [ 2.901098@0] codec:register clk_set_setting cpu[33]
- [ 2.906751@3] DI: di_module_init ok.
- [ 2.909556@3] DI: di_module_init: major 238
- [ 2.913893@3] DI: di_probe
- [ 2.916549@3] deinterlace has 1 memory regions
- [ 2.920799@3] DI: di reveser memory 0x7b300000, size 30MB.
- [ 2.920809@3] deinterlace deinterlace.25: assigned reserved memory node linux,di ok
- [ 2.928349@3] DI-di_probe: get flag_cma error.
- [ 2.932760@3] di_irq:78,timerc_irq:38
- [ 2.936572@3] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 7684a000 reg_buf ffffffc0617c6000
- [ 2.946719@3] rdma_register success, handle 4 table_size 8192
- [ 2.952407@3] DI: di_probe allocate rdma channel 4.
- [ 2.957238@3] DI: DI hw version 2.
- [ 2.960605@3] 0x000000db:Y=db,U=0,V=0
- [ 2.964219@3] 0x000000dc:Y=dc,U=0,V=0
- [ 2.967852@3] 0x000000dd:Y=dd,U=0,V=0
- [ 2.971464@3] 0x000000de:Y=de,U=0,V=0
- [ 2.975086@3] 0x000000df:Y=df,U=0,V=0
- [ 2.978714@3] 0x000000e0:Y=e0,U=0,V=0
- [ 2.982331@3] 0x000000e1:Y=e1,U=0,V=0
- [ 2.985954@3] 0x000000e2:Y=e2,U=0,V=0
- [ 2.989580@3] 0x000000e3:Y=e3,U=0,V=0
- [ 2.993199@3] 0x000000f0:Y=f0,U=0,V=0
- [ 2.996823@3] 0x000000f1:Y=f1,U=0,V=0
- [ 3.000448@3] 0x000000f2:Y=f2,U=0,V=0
- [ 3.004066@3] 0x000000f3:Y=f3,U=0,V=0
- [ 3.007694@3] 0x000000f4:Y=f4,U=0,V=0
- [ 3.011311@3] 0x000000f5:Y=f5,U=0,V=0
- [ 3.014934@3] 0x000000f6:Y=f6,U=0,V=0
- [ 3.018564@3] 0x000000f7:Y=f7,U=0,V=0
- [ 3.022179@3] 0x000000f8:Y=f8,U=0,V=0
- [ 3.025801@3] 0x000000f9:Y=f9,U=0,V=0
- [ 3.029429@3] 0x000000fa:Y=fa,U=0,V=0
- [ 3.033046@3] 0x000000fb:Y=fb,U=0,V=0
- [ 3.036669@3] 0x000000fc:Y=fc,U=0,V=0
- [ 3.040846@3] efusekeynum: 4
- [ 3.043145@3] efusekeyname: mac offset: 0 size: 6
- [ 3.049541@3] efusekeyname: mac_bt offset: 6 size: 6
- [ 3.055906@3] efusekeyname: mac_wifi offset: 12 size: 6
- [ 3.062296@3] efusekeyname: usid offset: 18 size: 16
- [ 3.069017@3] efuse efuse.9: probe OK!
- [ 3.072738@3] key unify config unifykey-num is 14
- [ 3.077113@3] key unify fact unifykey-num is 14
- [ 3.081524@3] aml_unifykeys_probe:1280=============unifykey_devno:ec00000
- [ 3.088579@3] 6unifykey: device unifykeys created ok
- [ 3.093388@3] 6aml_unifykeys_init done!
- [ 3.097142@3] PPMGRDRV: warn: ppmgr module init func called
- [ 3.102780@3] PPMGRDRV: err: ppmgr_driver_probe called
- [ 3.107752@3] ppmgr has 1 memory regions
- [ 3.111652@3] PPMGRDRV: info: ppmgr_dev major:235
- [ 3.116594@3] PPMGRDRV: info: ppmgr_probe done
- [ 3.121142@3] amlogic rfkill init
- [ 3.124043@3] enter bt_probe of_node
- [ 3.127521@3] not get gpio_en
- [ 3.130423@3] power on valid level is high
- [ 3.134305@3] bt: power_on_pin_OD = 0;
- [ 3.557184@3] audio_dsp: [dsp]register dsp to char divece(257)
- [ 3.558142@3] amaudio: amaudio: driver amaudio succuess!
- [ 3.562727@3] vdin_drv_init: major 234
- [ 3.566693@3] rdma_register, rdma_table_addr ffffff8000434000 rdma_table_addr_phy 7684c000 reg_buf ffffffc0617b8c00
- [ 3.576724@3] rdma_register success, handle 5 table_size 512
- [ 3.582318@3] vdin_drv_probe:vdin.0 rdma hanld 5.
- [ 3.587259@3]
- [ 3.587259@3] vdin memory resource undefined!!
- [ 3.593096@3] vdin0 cma_mem_size = 16 MB
- [ 3.596988@3] vdin0 irq: 115 rdma irq: 2
- [ 3.600894@3] vdin_drv_probe: fclk_div5 is 400 MHZ
- [ 3.605621@3] vdin_drv_probe: vdin[0] clock is 50 MHZ
- [ 3.610842@3] vdin_drv_probe: driver initialized ok
- [ 3.615575@3] rdma_register, rdma_table_addr ffffff8000436000 rdma_table_addr_phy 7684d000 reg_buf ffffffc0617b9400
- [ 3.625797@3] rdma_register success, handle 6 table_size 512
- [ 3.631394@3] vdin_drv_probe:vdin.1 rdma hanld 6.
- [ 3.636327@3] vdin1 has 1 memory regions
- [ 3.639972@3] vdin vdin1.27: assigned reserved memory node linux,vdin1_cma ok
- [ 3.647005@3]
- [ 3.647005@3] vdin memory resource done.
- [ 3.652608@3] vdin1 cma_mem_size = 16 MB
- [ 3.656491@3] vdin1 irq: 117 rdma irq: 4
- [ 3.660416@3] vdin_drv_probe: fclk_div5 is 400 MHZ
- [ 3.665119@3] vdin_drv_probe: vdin[1] clock is 50 MHZ
- [ 3.670351@3] vdin_drv_probe: driver initialized ok
- [ 3.675125@3] vdin_drv_init: vdin driver init done
- [ 3.679705@3] tvafe_drv_init: major 233
- [ 3.683842@3] tvafe: tvafe_init.
- [ 3.686967@3] [RX]-hdmirx: hdmirx_init.
- [ 3.690472@3] ESM HLD: Initializing...
- [ 3.694179@3] ESM HLD: Registering device range 'esm_rx'...
- [ 3.699714@3] ESM HLD: Device range 'esm_rx' has been registered.
- [ 3.705735@3] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 3.711727@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 3.718335@3] ESM HLD: Creating device 'esm_rx'...
- [ 3.723256@3] ESM HLD: Device 'esm_rx' has been created.
- [ 3.728343@3] ESM HLD: Done initializing the HLD driver.
- [ 3.733596@3] module init
- [ 3.736338@3]
- [ 3.736338@3] VECM probe start
- [ 3.741298@3] aml_vecm_probe: ok
- [ 3.744924@3] saradc c1108680.saradc: initialized by BL30
- [ 3.749491@3] saradc c1108680.saradc: calibration start:
- [ 3.754772@3] saradc c1108680.saradc: nominal=0, value=6
- [ 3.760038@3] saradc c1108680.saradc: nominal=256, value=232
- [ 3.765638@3] saradc c1108680.saradc: nominal=512, value=461
- [ 3.771249@3] saradc c1108680.saradc: nominal=768, value=690
- [ 3.776850@3] saradc c1108680.saradc: nominal=1023, value=918
- [ 3.782504@3] saradc c1108680.saradc: calibration end: coef=4578
- [ 3.788709@3] remote: Driver init
- [ 3.791813@3] remote: platform_data g_remote_ao_offset=580
- [ 3.797172@3] remote: platform_data irq =228
- [ 3.801430@3] remote: set drvdata completed
- [ 3.805626@3] remote: device_create_file completed
- [ 3.810855@3] input: aml_keypad as /devices/meson-remote.11/input/input0
- [ 3.817561@3] remote: input_register_device completed
- [ 3.822407@3] remote: set_remote_mode[78]
- [ 3.826336@3] remote: remote config major:230
- [ 3.830989@3] remote: physical address:0x6175c000
- [ 3.835782@3] gpio-key gpio_keypad.48: gpio_key: 0 name(power) pin()
- [ 3.841682@3] gpio-key gpio_keypad.48: amlogic_gpio_name_map_num pin 0!::
- [ 3.848415@3] gpio-key gpio_keypad.48: gpio_key: 0 power(147)
- [ 3.854123@3] gpio-key gpio_keypad.48: start setup_timer
- [ 3.859356@3] gpio-key gpio_keypad.48: power key(116) registed.
- [ 3.865456@3] input: gpio_keypad as /devices/gpio_keypad.48/input/input1
- [ 3.872074@3] gpio-key gpio_keypad.48: gpio keypad register input device completed.
- [ 3.879463@3] input input1: gpio keypad major:229
- [ 3.884515@3] cpuinfo: probe done
- [ 3.888309@3] input: cec_input as /devices/virtual/input/input2
- [ 3.893534@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
- [ 3.899385@3] cectx aocec: aml_cec_probe(): no hhi reg resource
- [ 3.905327@3] cectx aocec: aml_cec_probe(): can't find hdmirx
- [ 3.912053@3] cec: wake up flag:0
- [ 3.915872@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 3.922883@3] aml-i2s-dai I2S.40: I2S Mic is in platform!
- [ 3.926596@3] aml_pcm_dai: pcm mode detection =1
- [ 3.956980@3] input input1: key 116 up
- [ 4.137183@3] aml_snd_card: headphone detection disable=1
- [ 4.137834@3] aml_snd_m8_card aml_m8_snd.47: T9015-audio-hifi <-> I2S.40 mapping ok
- [ 4.144929@3] aml_snd_m8_card aml_m8_snd.47: dit-hifi <-> SPDIF.41 mapping ok
- [ 4.151699@3] aml_pcm: enter aml_pcm_new dai->name: PCM.42 dai->id: 0
- [ 4.158132@3] aml_snd_m8_card aml_m8_snd.47: pcm2bt-pcm <-> PCM.42 mapping ok
- [ 4.165092@3] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTL
- [ 4.172681@3] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 4.181467@3] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTR
- [ 4.189053@3] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 4.199826@3] TCP: cubic registered
- [ 4.201897@3] NET: Registered protocol family 10
- [ 4.206522@3] NET: Registered protocol family 17
- [ 4.210485@3] Key type dns_resolver registered
- [ 4.216363@3] Registering SWP/SWPB emulation handler
- [ 4.220438@3] regulator-dummy: disabling
- [ 4.925174@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
- [ 4.926921@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.932230@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 4.940413@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 4.946120@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.952917@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.960235@3] usb usb1: Product: xHCI Host Controller
- [ 4.965229@3] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 4.970843@3] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 4.976483@3] hub 1-0:1.0: USB hub found
- [ 4.979762@3] hub 1-0:1.0: 2 ports detected
- [ 4.984029@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.989486@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 4.997364@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 5.004129@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.011473@2] usb usb2: Product: xHCI Host Controller
- [ 5.016461@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 5.022082@2] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 5.027667@3] hub 2-0:1.0: USB hub found
- [ 5.030977@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 5.038713@3] console [netcon0] enabled
- [ 5.041990@3] netconsole: network logging started
- [ 5.046681@3] aml_vrtc rtc.32: setting system clock to 2017-09-25 15:10:55 UTC (1506352255)
- [ 5.055961@3] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 5.060409@3] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 5.066793@3] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
- [ 5.072244@3] gxbb_pm: enter meson_pm_probe!
- [ 5.076093@3] gxbb_pm: meson_pm_probe done
- [ 5.081013@3] cpucore_cooling_register, max_cpu_core_num:4
- [ 5.100886@0] aml_istbt_dev_ready NULL
- [ 5.100953@0] ALSA device list:
- [ 5.102123@0] #0: AML-M8AUDIO
- [ 5.105757@0] Freeing unused kernel memory: 912K (ffffffc0019ef000 - ffffffc001ad3000)
- [ 5.148031@1] fb: Frame buffer memory assigned at
- [ 5.148047@1] fb: 0, phy: 0x000000007d100000, vir:0xffffff8001b00000, size=24576K
- [ 5.148047@1]
- [ 5.148057@1] fb: ---------------clear fb0 memory ffffff8001b00000
- [ 5.166467@1] fb: osd[0] canvas.idx =0x40
- [ 5.166483@1] fb: osd[0] canvas.addr=0x7d100000
- [ 5.166490@1] fb: osd[0] canvas.width=7680
- [ 5.166497@1] fb: osd[0] canvas.height=3240
- [ 5.166503@1] fb: osd[0] frame.width=1920
- [ 5.166510@1] fb: osd[0] frame.height=1080
- [ 5.193761@1] fb: osd[0] canvas.idx =0x40
- [ 5.193765@1] fb: osd[0] canvas.addr=0x7d100000
- [ 5.193768@1] fb: osd[0] canvas.width=7680
- [ 5.193771@1] fb: osd[0] canvas.height=2160
- [ 5.193773@1] fb: osd[0] frame.width=1920
- [ 5.193775@1] fb: osd[0] frame.height=1080
- [ 5.229969@3] fb: Frame buffer memory assigned at
- [ 5.229995@3] fb: 1, phy: 0x000000007e900000, vir:0xffffff8003380000, size=1024K
- [ 5.229995@3]
- [ 5.230010@3] fb: fb1 open, logo index:1
- [ 5.294116@3] codec:free_alloced_keep_buffer (null). (null). (null)
- [ 5.327420@3] vfm_map_store:rm default
- [ 5.327420@3]
- [ 5.327688@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 5.327688@3]
- [ 5.327974@3] fb: osd[0] enable: 1 (platform_init)
- [ 5.361500@3] fb: osd[1] enable: 0 (platform_init)
- [ 5.493695@0] Console: switching to colour frame buffer device 240x67
- [ 5.525950@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 5.525966@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 10.088889@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
- [ 10.089925@2] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
- [ 10.285450@3] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 17.997801@3] random: systemd urandom read with 116 bits of entropy available
- [ 18.002157@3] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 18.002576@3] systemd[1]: Detected architecture arm64.
- [ 18.002821@3] systemd[1]: Set hostname to <LibreELEC>.
- [ 18.083874@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 18.084215@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 18.084444@3] systemd[1]: Listening on Journal Socket.
- [ 18.084681@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 18.084759@3] systemd[1]: Reached target Paths.
- [ 18.084905@3] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 18.085368@3] systemd[1]: Listening on udev Control Socket.
- [ 18.086160@3] systemd[1]: Created slice User and Session Slice.
- [ 18.086380@3] systemd[1]: Listening on udev Kernel Socket.
- [ 18.086769@3] systemd[1]: Created slice System Slice.
- [ 18.088933@1] systemd[1]: Starting Show Version...
- [ 18.091607@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 18.093756@1] systemd[1]: Starting Samba Configuration...
- [ 18.099409@3] systemd[1]: Starting Load Kernel Modules...
- [ 18.102106@3] systemd[1]: Starting Debug Shell on /dev/ttyS0...
- [ 18.105304@3] systemd[1]: Starting Setup machine-id...
- [ 18.107182@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 18.114971@3] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 18.118497@3] systemd[1]: Mounting Debug File System...
- [ 18.121739@3] systemd[1]: Mounting POSIX Message Queue File System...
- [ 18.122642@3] systemd[1]: Reached target Swap.
- [ 18.127666@3] systemd[1]: Mounting Variable Directory...
- [ 18.127954@3] systemd[1]: Reached target Slices.
- [ 18.130523@3] systemd[1]: Mounting Temporary Directory...
- [ 18.132233@3] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 18.132498@3] systemd[1]: Reached target RPC Port Mapper.
- [ 18.139078@3] systemd[1]: Mounted Debug File System.
- [ 18.139360@3] systemd[1]: Mounted POSIX Message Queue File System.
- [ 18.142309@3] systemd[1]: Mounted Temporary Directory.
- [ 18.143364@3] systemd[1]: Started Show Version.
- [ 18.144297@3] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 18.145805@3] systemd[1]: Started Samba Configuration.
- [ 18.150436@3] systemd[1]: Started Debug Shell on /dev/ttyS0.
- [ 18.151841@3] systemd[1]: Started Setup machine-id.
- [ 18.151913@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 18.152799@3] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 18.154404@3] systemd[1]: Mounted Variable Directory.
- [ 18.163407@3] systemd[1]: Starting Setup Timezone data...
- [ 18.236361@3] systemd[1]: Starting udev Coldplug all Devices...
- [ 18.242911@3] systemd[1]: Starting Journal Service...
- [ 18.245627@3] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 18.260618@0] media: Linux media interface: v0.10
- [ 18.263148@3] systemd[1]: Started Setup Timezone data.
- [ 18.269159@3] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 18.270072@3] systemd[1]: Reached target Local File Systems (Pre).
- [ 18.270295@3] systemd[1]: Reached target Local File Systems.
- [ 18.274725@0] Linux video capture interface: v2.00
- [ 18.274742@0] WARNING: You are using an experimental version of the media stack.
- [ 18.274742@0] As the driver is backported to an older kernel, it doesn't offer
- [ 18.274742@0] enough quality for its usage in production.
- [ 18.274742@0] Use it with care.
- [ 18.274742@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- [ 18.274742@0] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
- [ 18.282644@1] amlvid:err: amlvideo_init called
- [ 18.282655@1] amlvid:err: amlvideo_create_instance called
- [ 18.282664@1] amlvid:err: v4l2_dev.name=:amlvideo-000
- [ 18.282964@1] amlvideo-000: V4L2 device registered as video10
- [ 18.294213@1] mali-utgard d00c0000.mali: set min pp to default 1
- [ 18.294227@1] mali-utgard d00c0000.mali: set min clk default to 0
- [ 18.294340@1] mali-utgard d00c0000.mali: max clk set 5
- [ 18.294348@1] mali-utgard d00c0000.mali: turbo clk set to 6
- [ 18.297304@1] gpu cooling register okay with err=0
- [ 18.297500@1] gpu core cooling register okay with err=0
- [ 18.297937@1] Mali: Mali device driver loaded
- [ 18.302002@3] systemd[1]: Started Load Kernel Modules.
- [ 18.304851@3] systemd[1]: Starting Apply Kernel Variables...
- [ 18.307477@3] systemd[1]: Mounting Configuration File System...
- [ 18.316000@3] systemd[1]: Mounted Configuration File System.
- [ 18.351816@3] systemd[1]: Started Apply Kernel Variables.
- [ 18.382043@3] systemd[1]: Started Journal Service.
- [ 18.404040@2] systemd-journald[1882]: Received request to flush runtime journal from PID 1
- [ 18.623036@2] random: nonblocking pool is initialized
- [ 19.312297@3] Console: switching to colour dummy device 80x25
- [ 19.374201@1] remote: cur_mode = 0
- [ 19.374224@1] remote: set_remote_mode[78]
- [ 19.512079@0] Triggered SDIO WiFi power on and bus rescan.
- [ 19.512136@0] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240
- [ 19.817824@0] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240
- [ 20.098360@0] libphy: set driving length c
- [ 20.098461@0] libphy: set PLL minimum jitter
- [ 20.128293@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 20.128310@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 20.129317@3] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 20.130394@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 20.130409@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 20.131356@3] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 20.137039@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 20.137060@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 20.137108@3] aml_sd_emmc_data_thread 2639 sdio: cmd:8
- [ 20.159596@0] sdio: new high speed SDIO card at address 0001
- [ 20.159610@0] sdio: clock 50000000, 4-bit-bus-width
- [ 20.159610@0]
- [ 20.162255@0] [sdio_reinit] finish
- [ 20.178224@2] libphy: set driving length c
- [ 20.178324@2] libphy: set PLL minimum jitter
- [ 20.200224@1] 8021q: 802.1Q VLAN Support v1.8
- [ 21.604477@0] libphy: stmmac-0:08 - Link is Up - 100/Full
- [ 23.160390@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 23.160458@1] aml_spdif_dai: share the same clock
- [ 23.160469@1] aml_audio_hw: IEC958 PCM32
- [ 23.160477@1] hdmitx: audio: aout notify rate 44100
- [ 23.160481@1] hdmitx: audio: aout notify size 32
- [ 23.160487@1] hdmitx: audio: aout notify format CT_PCM
- [ 23.160492@1] hdmtix: set audio
- [ 23.160507@1] hdmitx tx_aud_src = 0
- [ 23.160535@1] hdmitx: fs = 2, cd = 4, tmds_clk = 297000
- [ 23.160540@1] hdmitx aud_n_para = 4707
- [ 23.160560@1] hdmitx set channel status
- [ 23.160621@1] hdmitx: audio: Audio Type: PCM
- [ 23.160626@1] hdmitx: audio: set audio param
- [ 23.160637@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
- [ 23.160982@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 23.160988@1] aml_spdif_dai: share the same clock
- [ 23.160997@1] aml_audio_hw: IEC958 PCM32
- [ 23.161002@1] hdmitx: audio: aout notify rate 44100
- [ 23.161006@1] hdmitx: audio: aout notify size 32
- [ 23.161009@1] hdmitx: audio: no update
- [ 23.161016@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
- [ 23.161221@1] channel count should be 8, we got 2 aborting
- [ 23.163846@1] aml_snd_m8_card aml_m8_snd.47: I2S playback enable
- [ 23.163869@1] aml_snd_m8_card aml_m8_snd.47: IEC958 playback enable
- [ 23.219508@1] codec:vdec_create instance ffffff80034e9000, total 1
- [ 23.338602@0] hdmitx: set frac_rate_policy as 1
- [ 23.338654@0] vout_serve: vmode set to 2160p24hz
- [ 23.338698@0] fb: current vmode=2160p30hz, cmd: 0x50000
- [ 23.338713@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=23
- [ 23.338724@0] tv_vout: mode is 23,sync_duration_den=1,sync_duration_num=24
- [ 23.338748@0] tv_vout: TV mode 2160p24hz selected.
- [ 23.338759@0]
- [ 23.338759@0] vdac_enable: on:0,module_sel:8
- [ 23.338779@0]
- [ 23.338779@0] vdac_enable: on:0,module_sel:8
- [ 23.338805@0] tv_vout: new mode =2160p24hz set ok
- [ 23.338813@0] vout_serve: vinfo mode is: 2160p24hz
- [ 23.338821@0] vout_serve: new mode 2160p24hz set ok
- [ 23.338851@0] hdmitx: video: get current mode: 2160p24hz
- [ 23.338858@0] hdmitx: update rx hdr info 0
- [ 23.338865@0] hdmitx: update physcial size: 520 290
- [ 23.338936@0] hdmitx: system: already init VIC = 0 Now VIC = 93
- [ 23.338948@0] hdmitx: rx has SCDC present indicator
- [ 23.340968@0] hdmirx version is 2.0
- [ 23.340975@0] hdmitx div40: 0
- [ 23.366988@0] hdmitx: system: set mode VIC 93 (cd0,cs0,pm1,vd0,1)
- [ 23.366999@0] hdmitx: system: set pll
- [ 23.367003@0] hdmitx: system: param->VIC:93
- [ 23.367009@0] hdmitx: set clk: VIC = 93 cd = 4 frac_rate = 1
- [ 23.367020@0] config HPLL = 5940000
- [ 23.367042@0] HPLL: 0xc000027b
- [ 23.367045@0] config HPLL done
- [ 23.367055@0] set_hpll_od3_clk_div[437] div = 6
- [ 23.367064@0] j = 6 vid_clk_div = 2
- [ 23.367078@0] hdmitx: set enc for VIC: 93
- [ 23.367095@0] hdmitx_set_hw[4941] set VIC = 93
- [ 23.367103@0] hdmitx: system: irq 80000001
- [ 23.383036@0] Start = 0x10000100 End = 0x100001ff
- [ 23.383053@0] [0x10000104]: 0x00000001
- [ 23.383235@0] [0x10000180]: 0x000000ff
- [ 23.383240@0] [0x10000181]: 0x000000ff
- [ 23.383245@0] [0x10000182]: 0x00000003
- [ 23.383251@0] [0x10000183]: 0x00000007
- [ 23.383256@0] [0x10000184]: 0x0000003f
- [ 23.383261@0] [0x10000185]: 0x00000002
- [ 23.383267@0] [0x10000187]: 0x000000ff
- [ 23.383273@0] [0x10000188]: 0x00000003
- [ 23.499088@3] hdmitx: system: PHY Setting Done
- [ 23.499155@0] hdmitx: system: irq 80000001
- [ 23.499221@0] Start = 0x10000100 End = 0x100001ff
- [ 23.499264@0] [0x10000104]: 0x00000001
- [ 23.499795@0] [0x10000180]: 0x000000ff
- [ 23.499818@0] [0x10000181]: 0x000000ff
- [ 23.499840@0] [0x10000182]: 0x00000003
- [ 23.499862@0] [0x10000183]: 0x00000007
- [ 23.499884@0] [0x10000184]: 0x0000003f
- [ 23.499906@0] [0x10000185]: 0x00000002
- [ 23.499932@0] [0x10000187]: 0x000000ff
- [ 23.499954@0] [0x10000188]: 0x00000003
- [ 23.503163@3] Sink is HDMI device
- [ 23.503245@3] hdmitx: system: packet: can't get vendor data
- [ 23.503268@3] 2160p24hz 24 1
- [ 23.503291@3] 2160p24hz 2997 125
- [ 23.503310@3] hdmtix: set audio
- [ 23.503350@3] hdmitx tx_aud_src = 0
- [ 23.503442@3] hdmitx: fs = 2, cd = 4, tmds_clk = 296703
- [ 23.503462@3] hdmitx aud_n_para = 4459
- [ 23.503527@3] hdmitx set channel status
- [ 23.503695@3] hdmitx: audio: Audio Type: PCM
- [ 23.503721@3] fb: current vmode=2160p24hz, cmd: 0x10000
- [ 23.543206@3] fb: osd[0] canvas.idx =0x40
- [ 23.543216@3] fb: osd[0] canvas.addr=0x7d100000
- [ 23.543225@3] fb: osd[0] canvas.width=15360
- [ 23.543231@3] fb: osd[0] canvas.height=2160
- [ 23.543238@3] fb: osd[0] frame.width=3840
- [ 23.543243@3] fb: osd[0] frame.height=2160
- [ 23.670385@3] fb: osd[0] canvas.idx =0x40
- [ 23.670408@3] fb: osd[0] canvas.addr=0x7d100000
- [ 23.670429@3] fb: osd[0] canvas.width=7680
- [ 23.670446@3] fb: osd[0] canvas.height=2160
- [ 23.670461@3] fb: osd[0] frame.width=1920
- [ 23.670476@3] fb: osd[0] frame.height=1080
- [ 23.719145@3] fb: osd[0] enable: 1 (kodi.bin)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement