Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11> cat rsts.ini
- set cpu 11/73, 4M, idle
- set clk 50Hz
- show cpu
- set hk disable
- set ptr disable
- set ptp disable
- set rk disable
- set rp disable
- set rx disable
- set vh disable
- set tm disable
- set cr disable
- set lpt disable
- set rl disable
- ; disk drives
- set rq enable
- set rq0 ra81
- set rq1 ra81
- set rq2 disable
- set rq3 disable
- ;set rq2 rd31
- ;set rq3 rd31
- attach rq0 Disks/rq0-ra81a.dsk
- attach rq1 Disks/rq1-ra81b.dsk
- ;attach rq2 Disks/rq2-rd31a.dsk
- ;attach rq3 Disks/rq3-rd31b.dsk
- ;set console telnet=10003
- ; DZ11, KB5:-KB12:
- echo DZ11-->10000
- echo
- set dz lines=8
- ; make SIMH listen on port 10000
- att dz 10000
- ; tape drives
- set tq0 locked
- set tq1 disable
- set tq2 disable
- set tq3 disable
- ;set tq1 locked
- ;set tq2 locked
- ;set tq3 locked
- ;attach -e tq0 tapes/rstse_v10_1_install_sep10_1992.tap
- attach -e tq0 -f tpc tapes/decnet-e_v4_1.tap
- ;attach -e tq1 -f tpc tapes/...
- ;attach -e tq2 -f tpc tapes/...
- ;attach -e tq3 -f tpc tapes/...
- ; DECnet 31.28
- set xq enable
- set xq type=DELQA mac=AA-00-04-00-1C-7C
- att xq tap:dnettap0
- ;set xqb enable
- set xqb disable
- set xqb type=DEQNA mac=96-72-A1-2A-E7-40
- ;attach xqb ...
- boot rq0
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11>
- localuser@opensuse:~/PDP-11> ./rsts
- PDP-11 simulator V4.0-0 Current git commit id: 314a1da9
- Disabling RK
- Disabling HK
- Disabling TM
- CPU 11/73, NOCIS, autoconfiguration enabled, idle enabled
- 4088KB
- DZ11-->10000
- /home/localuser/PDP-11/rsts.ini-37> att dz 10000
- Listening on port 10000
- /home/localuser/PDP-11/rsts.ini-56> att xq tap:dnettap0
- libpcap version 1.9.0 (with TPACKET_V3)
- Eth: opened OS device dnettap0
- RSTS V10.1-L MICRO (DU0) INIT V10.1-0L
- Today's date? 8-MAR-19
- Current time? 22:57
- Start timesharing? <Yes>
- Size of monitor has changed from 74K to 79K.
- Adjusting memory table.
- Memory allocation table:
- 0K: 00000000 - 00473777 ( 79K) : EXEC
- 79K: 00474000 - 15523777 (1670K) : USER
- 1749K: 15524000 - 17757777 ( 295K) : XBUF
- Memory available to RSTS/E is 2044K words.
- 08-Mar-19 10:57 PM
- 7 devices disabled
- Proceed with system startup? <YES>
- Beginning RSTS/E system startup...
- 08-Mar-19 10:57 PM Installing monitor overlays
- 08-Mar-19 10:57 PM Mounting disks
- 08-Mar-19 10:57 PM Assigning logical names
- 08-Mar-19 10:57 PM Starting error logging
- 08-Mar-19 10:57 PM Setting system characteristics
- 08-Mar-19 10:57 PM Installing run-time systems and libraries
- 08-Mar-19 10:57 PM Starting Operator/Message Services
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 10:57 PM <<<<<<<<<<<<<<<
- Message 4 from OMS, user [1,2], Detached, job 3
- Starting Operator/Message Services
- 08-Mar-19 10:57 PM Setting terminal characteristics
- 08-Mar-19 10:57 PM Defining system commands
- 08-Mar-19 10:57 PM Setting printer characteristics
- 08-Mar-19 10:57 PM Starting spoolers
- *** From [1,2] "[ 1, 2]" on KB0: at 10:57 PM 08-Mar-19
- ** RSTS/E is on the air...
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 10:57 PM <<<<<<<<<<<<<<<
- Message 5 from user [1,2] on _KB0:, job 2
- The system startup is complete
- RSTS V10.1-L 08-Mar-19 10:57 PM
- User: 1,2
- Password:
- Jobs detached under this account:
- Job What Size State Run-time RTS
- 1 ERRCPY 5K SR 0.3 ...RSX
- 3 OMS 9K SL 0.0 ...RSX
- 4 PBS... 19K SL 0.0 ...RSX
- Job number to attach to?
- Last interactive login on 08-Mar-19, 10:57 PM at KB0:
- Last non-interactive login on 08-Mar-19, 10:57 PM
- 3 other users are logged in under this account
- $
- $
- $ show dev
- Device _DV0: Status: Disabled by INIT
- Device _DL0: Control RL: Status: Disabled by INIT
- Device _DL1: Control RL: Status: Disabled by INIT
- Device _DL2: Control RL: Status: Disabled by INIT
- Device _DL3: Control RL: Status: Disabled by INIT
- Device _DU0: Control RU0: CSR 772150 Status: Mounted
- Device _DU1: Control RU0: CSR 772150
- Device _DU2: Control RU: Status: Non-existent
- Device _DU3: Control RU: Status: Non-existent
- Device _DU4: Control RU: Status: Non-existent
- Device _DU5: Control RU: Status: Non-existent
- Device _DU6: Control RU: Status: Non-existent
- Device _DU7: Control RU: Status: Non-existent
- Device _DU8: Control RU: Status: Non-existent
- Device _DU9: Control RU: Status: Non-existent
- Device _DU10: Control RU: Status: Non-existent
- Device _DU11: Control RU: Status: Non-existent
- Device _DU12: Control RU: Status: Non-existent
- Device _DU13: Control RU: Status: Non-existent
- Device _DU14: Control RU: Status: Non-existent
- Device _DU15: Control RU: Status: Non-existent
- Device _KB0: (KBA0:) Control TT0: CSR 777560 Status: Restricted
- Device _KB1: (KBD0:) Control PK0: Status: Restricted
- Device _KB2: (KBD1:) Control PK1: Status: Restricted
- Device _KB3: (KBD2:) Control PK2: Status: Restricted
- Device _KB4: (KBD3:) Control PK3: Status: Restricted
- Device _KB5: (KBG0:) Control DZ0:0 CSR 760100 Status: Restricted
- Device _KB6: (KBG1:) Control DZ0:1 CSR 760100 Status: Restricted
- Device _KB7: (KBG2:) Control DZ0:2 CSR 760100 Status: Restricted
- Device _KB8: (KBG3:) Control DZ0:3 CSR 760100 Status: Restricted
- Device _KB9: (KBG4:) Control DZ0:4 CSR 760100 Status: Restricted
- Device _KB10: (KBG5:) Control DZ0:5 CSR 760100 Status: Restricted
- Device _KB11: (KBG6:) Control DZ0:6 CSR 760100 Status: Restricted
- Device _KB12: (KBG7:) Control DZ0:7 CSR 760100 Status: Restricted
- Device _KB13: (KBG8:) Control DZ1:0 CSR 760110 Status: Restricted
- Device _KB14: (KBG9:) Control DZ1:1 CSR 760110 Status: Restricted
- Device _KB15: (KBG10:) Control DZ1:2 CSR 760110 Status: Restricted
- Device _KB16: (KBG11:) Control DZ1:3 CSR 760110 Status: Restricted
- Device _KB17: (KBG12:) Control DZ1:4 CSR 760110 Status: Restricted
- Device _KB18: (KBG13:) Control DZ1:5 CSR 760110 Status: Restricted
- Device _KB19: (KBG14:) Control DZ1:6 CSR 760110 Status: Restricted
- Device _KB20: (KBG15:) Control DZ1:7 CSR 760110 Status: Restricted
- Device _NL0:
- Device _PK0:
- Device _PK1:
- Device _PK2:
- Device _PK3:
- Device _XH0: (DELQA) Control QNA-0 CSR 774456 Def Addr: AA-00-04-00-1C-7C
- Device _LP0: Control LP0: Status: Disabled by INIT
- Device _MS0: Control TS11 Status: Disabled by INIT
- Device _MU0: CSR 774500
- Device _MU1: Status: Disabled by INIT
- $
- $
- $
- $
- $ show dev _XH0:
- Device _XH0: (DELQA) Control QNA-0 CSR 774456 Def Addr: AA-00-04-00-1C-7C
- $
- $
- $
- $
- $
- $
- $ @[0,1]install layered
- Deleting all global symbols
- Z[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m
- 7[1;61H[7m[1m08-Mar-19 10:57 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m
- 7[3H[K[7m[1m Dialogue Phase 8[0m
- 7[3H[K[7m[1m Dialogue Phase 8[0m[5H[J
- During this installation procedure you may:
- Type '?' for help
- Type '^' to go back to the previous question in the present section
- Type CTRL/Z to return to the beginning of the present section
- You cannot return to a previous section
- 7[3H[K[7m[1m Dialogue Phase 8[0m
- 7[22H[K[1mAre you ready to proceed? <yes>
- [21H[J8[0m[5H[J7[3H[K[7m[1m Dialogue Phase 8[0m
- Product names:
- BP2 DIBOL FRTRN77 PLXY 3271
- C81 DTR MAIL RJ2780
- DECDX FMS MENU WPS
- DECNET FORTRAN PDPDBG 2780 3780
- Enter a product name, multiple names separated by commas, or ALL.
- Enter ALL,NOprod[,...] to transfer all product updates except prod.
- 7[22H[K[1mProducts to install:
- [21H[J8[0m
- 7[22H[K[1mPatch account? <PATCH$:>
- [21H[J8[0m
- [5H[J
- The following will be installed:
- BP2 C81 DECDX DECNET
- DIBOL DTR FMS FORTRAN
- FRTRN77 MAIL MENU PDPDBG
- PLXY RJ2780 WPS 27803780
- 3271
- You may answer "Yes" to accept this list, or "No" to change it.
- 7[22H[K[1mIs this list OK? <yes>
- [21H[J8[0m
- Please enter the name and unit number of the disk to
- which you want to install the software. This disk
- should be physically mounted and write-enabled.
- 7[22H[K[1mTarget disk? <_SY:>
- [21H[J8[0m[5H[J
- Assigning system logicals
- 7[3H[K[7m[1m Dialogue Phase 8[0mThis is the end of the DIALOGUE phase.
- The next phase is the BUILD phase.
- 7[22H[K[1mAre you ready to proceed? <yes>
- [21H[J8[0m7[3H[K[7m[1m Build Phase 8[0m[5H[J
- 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m
- 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m
- 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5H[J
- Please mount the BP2 Library media and enter the
- name and unit number of the device.
- Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL'
- 7[22H[K[1mBP2 Library device? <_MU0:>
- [21H[J8[0m?ID labels don't match
- ? 7[21H[K[7m?Unable to mount media8[0m
- 7[22H[K[1mBP2 Library device? <_MU0:>
- [21H[J8[0m?ID labels don't match
- ? 7[21H[K[7m?Unable to mount media8[0m
- 7[22H[K[1mBP2 Library device? <_MU0:>
- [21H[J8[0m?ID labels don't match
- ? 7[21H[K[7m?Unable to mount media8[0m
- 7[22H[K[1mBP2 Library device? <_MU0:> ^Z
- [21H[J8[0m[5H[J
- Please mount the BP2 Library media and enter the
- name and unit number of the device.
- Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL'
- 7[22H[K[1mBP2 Library device? <_MU0:> ^C
- 7[3H[K[7m[1m Aborting 8[0m
- 7[r8[0mDeleting all global symbols
- Deassigning system logicals
- 08-Mar-19 10:58 PM
- System tape label default set to DOS
- SY:[1,2]INSTAL.LOG is a log file of this session
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $
- $ @[1, 0,1]install layered
- Deleting all global symbols
- Z[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m
- 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m
- 7[3H[K[7m[1m Dialogue Phase 8[0m
- 7[3H[K[7m[1m Dialogue Phase 8[0m[5H[J
- During this installation procedure you may:
- Type '?' for help
- Type '^' to go back to the previous question in the present section
- Type CTRL/Z to return to the beginning of the present section
- You cannot return to a previous section
- 7[3H[K[7m[1m Dialogue Phase 8[0m
- 7[22H[K[1mAre you ready to proceed? <yes>
- [21H[J8[0m[5H[J7[3H[K[7m[1m Dialogue Phase 8[0m
- Product names:
- BP2 DIBOL FRTRN77 PLXY 3271
- C81 DTR MAIL RJ2780
- DECDX FMS MENU WPS
- DECNET FORTRAN PDPDBG 2780 3780
- Enter a product name, multiple names separated by commas, or ALL.
- Enter ALL,NOprod[,...] to transfer all product updates except prod.
- 7[22H[K[1mProducts to install: DECNET
- [21H[J8[0m
- 7[22H[K[1mPatch account? <PATCH$:>
- [21H[J8[0m
- [5H[J
- The following will be installed:
- DECNET
- You may answer "Yes" to accept this list, or "No" to change it.
- 7[22H[K[1mIs this list OK? <yes>
- [21H[J8[0m
- Please enter the name and unit number of the disk to
- which you want to install the software. This disk
- should be physically mounted and write-enabled.
- 7[22H[K[1mTarget disk? <_SY:>
- [21H[J8[0m[5H[J
- Assigning system logicals
- 7[3H[K[7m[1m Dialogue Phase 8[0mThis is the end of the DIALOGUE phase.
- The next phase is the BUILD phase.
- 7[22H[K[1mAre you ready to proceed? <yes>
- [21H[J8[0m7[3H[K[7m[1m Build Phase 8[0m[5H[J
- 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m
- 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m
- 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5H[J
- Please mount the DECNET Library media and enter the
- name and unit number of the device.
- Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL'
- 7[22H[K[1mDECNET Library device? <_MU0:>
- [21H[J8[0m
- Deleting previous versions of DECnet/E software
- This activity may take a few minutes - please be patient
- Installing required components - please wait
- Do you want to install the HELP files for NCP? (YES/NO) <YES>
- Installing resident library versions of NFT and FAL
- DECnet/E components successfully installed
- The following information is required to complete this phase:
- Maximum area number in your network
- Maximum number of nodes in your network
- Please consult the DECnet/E Installation and Update Guide or
- the DECnet/E System Manager's Guide if you need additional help.
- Maximum area number in your network? (1-63) <1> 63
- Maximum number of nodes in your network? (1-26000) <256> 3000
- Creating DECnet/E parameter file
- DECnet/E parameter file successfully created
- Checking for network devices
- This activity may take a few minutes - please be patient
- The following information is required to complete this phase:
- Name of the executor node
- Address of the executor node
- DECnet default account information
- Please consult the DECnet/E Installation and Update Guide or
- the DECnet/E System Manager's Guide if you need additional help.
- Beginning parameter file configuration
- Name of the executor node? (1-6 characters, e.g. ALPHA) RST101
- Address of the executor node? (area.node, e.g. 1.25) 31.28
- Do you want a DECnet default account? (YES/NO) <YES>
- DECnet default account PPN? ([project-number,programmer-number])
- ?You have entered an invalid response
- You must enter a PPN for the account in the form
- [project-number,programmer-number] - for example [219,10].
- The project number and programmer number must each be
- decimal numbers in the range 1 to 254.
- DECnet default account PPN? ([project-number,programmer-number]) [219 319. 50 [50,1]
- Account [50,1] has been created to be the default DECnet account
- Only 1 circuit is defined on this node. The node will be defined as
- an end node unless you enter YES in response to the following
- prompt
- Do you want to define this node as a router? (YES/NO) <NO>
- Beginning DECnet/E V4.1 object definitions
- DECnet/E V4.1 object definitions completed
- Parameter file configuration completed
- Beginning DECnet/E start-up file creation
- A new DECnet/E start-up file has been created for you. To view the
- contents of the file, type or print DECNET$:DSTART.COM following
- completion of the installation. To use this file, add the following
- command to START.COM or enter it at the $ prompt whenever you want
- to restart DECnet/E:
- $ @DECNET$:DSTART
- To complete DECnet/E installation and testing, the system must
- be shut down and restarted to load the required DECnet/E monitor
- code. The SHUTUP program will be invoked to control the shutdown
- process. Please consult the RSTS/E System Manager's Guide if you
- are unfamiliar with SHUTUP.
- Are you ready to proceed with system shutdown? (YES/NO) <YES>
- %DECnet/E requires 4K words of XBUF to run as currently configured.
- If the current XBUF allocation is insufficient to handle the additional
- requirements of DECnet/E, change the memory defaults to provide the
- additional XBUF needed before restarting the system. Please consult
- the RSTS/E System Installation and Update Guide if you need additional
- help.
- Closing DECnet/E installation log file and running SHUTUP
- SHUTUP V10.1-H RSTS V10.1-L RSTS/E V10.1
- 11:00 PM 08-Mar-19 ######## Set-up Dialogue Phase ########
- Type '^' to any query to backup one question
- Allow Print/Batch Services jobs to complete <YES>?
- Minutes until system shutdown (0-99) <5>? 0
- Shutdown with automatic RESTART <NO>? yes
- 11:00 PM 08-Mar-19 ######## Warning Message Phase ########
- Further LOGINs are now disabled
- 11:00 PM 08-Mar-19 ######## Initial Job Killing Phase ########
- 11:00 PM 08-Mar-19 ######## Print/Batch Shutdown Phase ########
- Print/Batch Services shutdown complete at 11:01 PM
- 11:01 PM 08-Mar-19 ######## OMS Shutdown Phase ########
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:01 PM <<<<<<<<<<<<<<<
- Message 6 from SHUTUP, operator [1,2] on _KB0:, job 2
- Operator/Message Services shutting down
- Operator/Message Services shutdown complete at 11:01 PM
- 11:01 PM 08-Mar-19 ######## EVTLOG Shutdown Phase ########
- 11:01 PM 08-Mar-19 ######## ERRCPY Shutdown Phase ########
- 11:01 PM 08-Mar-19 ######## Remove RTS/RES LIB Phase ########
- 11:01 PM 08-Mar-19 ######## Log File Closing Phase ########
- 11:01 PM 08-Mar-19 ######## SWAP File Removal Phase ########
- 11:01 PM 08-Mar-19 ######## Disk DISMOUNT Phase ########
- 11:01 PM 08-Mar-19 ######## Final Shutdown Phase ########
- Please wait for system to re-boot itself
- RSTS V10.1-L MICRO (DU0) INIT V10.1-0L
- 08-Mar-19 11:01 PM
- Size of monitor has changed from 79K to 92K.
- Adjusting memory table.
- Memory allocation table:
- 0K: 00000000 - 00557777 ( 92K) : EXEC
- 92K: 00560000 - 15523777 (1657K) : USER
- 1749K: 15524000 - 17757777 ( 295K) : XBUF
- Memory available to RSTS/E is 2044K words.
- 7 devices disabled
- Continuing DECnet/E installation
- Event type 2.0, Local node state change
- Occurred 23-Feb-32 23:01:03.1 on node 31.28 (RST101)
- Reason for state change: Operator command
- Old node state = Off
- New node state = On
- Shutting down EVTLOG by operator request.
- Creating data file for network testing
- This activity may take a few minutes - please be patient
- Do you want to run the local node tests? (YES/NO) <YES>
- Beginning DECnet/E local node testing
- DECnet/E local node testing successfully completed
- DECNET$:DTESTL.LOG is a log file of local node testing
- Please check this file to verify the results
- Do you want to run the adjacent node test? (YES/NO) <YES>
- Beginning adjacent node testing for circuit QNA-0
- Circuit QNA-0 adjacent node testing completed.
- Adjacent node testing completed
- DECNET$:DTESTA.LOG is a log file of adjacent node testing.
- Please check this file to verify the results.
- Do you want to define any remote nodes? (YES/NO) <YES>
- Name of node? (Or press RETURN to quit) imp\pmi\
- IMPVAX
- Address of node IMPVAX? (area.node, e.g. 1.25) 31.1
- Node IMPVAX defined at address 31.1
- Name of node? (Or press RETURN to quit) IMPRTR
- Address of node IMPRTR? (area.node, e.g. 1.25) 31.1023
- Node IMPRTR defined at address 31.1023
- Name of node? (Or press RETURN to quit)
- Are you finished defining nodes for your network? (YES or NO) <YES>
- 08-Mar-19 11:02 PM Starting up DECnet/E V4.1
- DECnet/E installation completed
- * End of build phase *
- Deleting all global symbols
- Deassigning system logicals
- 08-Mar-19 11:02 PM
- System tape label default set to DOS
- SY:[1,2]INSTAL.LOG is a log file of this session
- Continuing system startup
- Proceed with system startup? <YES>
- Event type 4.15, Adjacency up
- Occurred 23-Feb-32 23:02:09.5 on node 31.28 (RST101)
- Circuit QNA-0
- Node address = 31.1023 (IMPRTR)
- Beginning RSTS/E system startup...
- 08-Mar-19 11:02 PM Installing monitor overlays
- 08-Mar-19 11:02 PM Mounting disks
- 08-Mar-19 11:02 PM Assigning logical names
- 08-Mar-19 11:02 PM Starting error logging
- 08-Mar-19 11:02 PM Setting system characteristics
- 08-Mar-19 11:02 PM Installing run-time systems and libraries
- 08-Mar-19 11:02 PM Starting Operator/Message Services
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:02 PM <<<<<<<<<<<<<<<
- Message 7 from OMS, user [1,2], Detached, job 4
- Starting Operator/Message Services
- 08-Mar-19 11:02 PM Setting terminal characteristics
- 08-Mar-19 11:02 PM Defining system commands
- 08-Mar-19 11:02 PM Setting printer characteristics
- 08-Mar-19 11:02 PM Starting spoolers
- 08-Mar-19 11:02 PM Starting up DECnet/E V4.1
- ?Command not unique
- ?Command not unique
- ?Command not unique
- ?Command not unique
- ?Can't SET SYSTEM - System already SET?Listener response - Component in wrong state, Circuit
- *** From RST101::[1,2] "[ 1, 2]" on KB0: at 11:02 PM 08-Mar-19
- ** RSTS/E is on the air...
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:02 PM <<<<<<<<<<<<<<<
- Message 8 from user [1,2] on _KB0:, job 3
- The system startup is complete
- RSTS V10.1-L 08-Mar-19 11:02 PM
- User: 1.\.\2\2\,2
- Password:
- Jobs detached under this account:
- Job What Size State Run-time RTS
- 1 ERRCPY 5K SR 0.2 ...RSX
- 2 EVTLOG 18K SL 0.0 ...RSX
- 4 OMS 9K SL 0.0 ...RSX
- 5 PBS... 19K SL 0.0 ...RSX
- Job number to attach to?
- Last interactive login on 08-Mar-19, 11:01 PM at KB0:
- Last non-interactive login on 08-Mar-19, 11:02 PM
- 4 other users are logged in under this account
- $
- $
- $
- $ mc ncp
- mc ncp
- ^
- ?Invalid command
- $ ncp
- NCP>
- NCP>show exec
- Node Volatile Summary as of 8-MAR-19 23:02:42
- Executor Node = 31.28 (RST101)
- State = On
- Identification = DECnet/E V4.1
- Active Links = 0
- NCP>
- NCP>
- NCP>show adjacent nodes
- ?Invalid command - SHOW \\ADJACENT NODES\\
- NCP>show k\k wohs\
- NCP>
- NCP>show active circ
- Active Circuit Volatile Summary as of 8-MAR-19 23:03:04
- Circuit = QNA-0
- State = On
- Adjacent Node = 31.1023 (IMPRTR)
- NCP>
- NCP>show active circui char
- Active Circuit Volatile Characteristics as of 8-MAR-19 23:03:13
- Circuit = QNA-0
- State = On
- Cost = 1
- Hello Timer = 45
- Originating Queue Limit = 5
- Listen Timer = 90
- Owner = 31.28 (RST101)
- Line = QNA-0
- Protocol Type = Ethernet
- Router Priority = 64
- Autorestart = On
- NCP>define circuit qna-0 hello 15
- ?Invalid command - DEFINE CIRCUIT QNA-0 \\HELLO 15\\
- NCP>set circuit qna-0 hello 15
- ?Invalid command - SET CIRCUIT QNA-0 \\HELLO 15\\
- NCP>help set
- Programs
- NCP
- SET
- Use the SET command to create or modify parameters or components in the
- volatile database on the executor node. Use the DEFINE command to
- create or modify parameters or components in the permanent database on
- the executor node.
- Additional help is available on:
- CIRCUIT EXECUTOR LINE LOGGING
- NODE OBJECT
- Programs NCP SET Subtopic? circ
- Programs
- NCP
- SET
- CIRCUIT
- Use the SET CIRCUIT command to create or modify circuit parameters in
- the volatile database. Use the DEFINE CIRCUIT command to create or
- modify permanent circuit parameters.
- SET KNOWN CIRCUITS (parameters ...)
- CIRCUIT circuit-id
- Additional help is available on:
- KNOWN CIRCUITS CIRCUIT circuit-id ALL
- AUTORESTART COST HELLO TIMER MAXIMUM ROUTERS
- ORIGINATING QUEUE LIMIT OWNER EXECUTOR RECALL TIMER
- ROUTER PRIORITY STATE TRIBUTARY Examples
- Programs NCP SET CIRCUIT Subtopic?
- PROGRAMS NCP SET Subtopic?
- PROGRAMS NCP Subtopic?
- PROGRAMS Subtopic?
- Topic?
- NCP>
- NCP>define circuit qna-0 hello timer 15
- NCP>set circuit qna-0 hello timer 15
- NCP>define circuit qna-0 cost 4
- NCP>set circuit qna-0 cost 4
- NCP>copy known nodes from impvax to both with purge
- ?Invalid command - \\COPY KNOWN NODES FROM IMPVAX TO BOTH WITH PURGE\\
- NCP>
- NCP>help copy
- Programs
- NCP
- Sorry, no help available on COPY at this level
- Help is available on:
- ABORT CLEAR Commands DEFINE
- EVENTS EXIT HELP LIST
- LOOP PARAMETERS PURGE SET
- SHOW TELL ZERO
- Programs NCP Subtopic?
- PROGRAMS Subtopic?
- Topic?
- NCP>
- NCP>
- NCP>exit
- $
- $
- $ show network
- Active Node Volatile Summary as of 8-MAR-19 23:04:44
- Executor Node = 31.28 (RST101)
- State = On
- Identification = DECnet/E V4.1
- Active Links = 0
- Remote Node = 31.1023 (IMPRTR)
- Circuit = QNA-0
- Next Node = 31.1023 (IMPRTR)
- $
- $ run $shutdown
- run $shutdown
- ^
- ?File does not exist
- $ run $shutup
- SHUTUP V10.1-H RSTS V10.1-L RSTS/E V10.1
- 11:04 PM 08-Mar-19 ######## Set-up Dialogue Phase ########
- Type '^' to any query to backup one question
- Allow Print/Batch Services jobs to complete <YES>?
- Minutes until system shutdown (0-99) <5>? 0
- Shutdown with automatic RESTART <NO>?
- 11:05 PM 08-Mar-19 ######## Warning Message Phase ########
- Further LOGINs are now disabled
- Further network activity is now disabled
- 11:05 PM 08-Mar-19 ######## DECNET Shutdown Phase ########
- 11:05 PM 08-Mar-19 ######## Initial Job Killing Phase ########
- 11:05 PM 08-Mar-19 ######## Print/Batch Shutdown Phase ########
- Event type 2.0, Local node state change
- Occurred 23-Feb-32 23:05:00.9 on node 31.28 (RST101)
- Reason for state change: Operator command
- Old node state = On
- New node state = Off
- Print/Batch Services shutdown complete at 11:05 PM
- 11:05 PM 08-Mar-19 ######## OMS Shutdown Phase ########
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<<
- Message 9 from SHUTUP, operator [1,2] on _KB0:, job 3
- Operator/Message Services shutting down
- Operator/Message Services shutdown complete at 11:05 PM
- 11:05 PM 08-Mar-19 ######## EVTLOG Shutdown Phase ########
- Shutting down EVTLOG by operator request.
- 11:05 PM 08-Mar-19 ######## ERRCPY Shutdown Phase ########
- 11:05 PM 08-Mar-19 ######## Remove RTS/RES LIB Phase ########
- 11:05 PM 08-Mar-19 ######## Log File Closing Phase ########
- 11:05 PM 08-Mar-19 ######## SWAP File Removal Phase ########
- 11:05 PM 08-Mar-19 ######## Disk DISMOUNT Phase ########
- 11:05 PM 08-Mar-19 ######## Final Shutdown Phase ########
- Please wait for system to re-boot itself
- RSTS V10.1-L MICRO (DU0) INIT V10.1-0L
- 08-Mar-19 11:05 PM
- Start timesharing? <Yes>
- 7 devices disabled
- Proceed with system startup? <YES>
- Beginning RSTS/E system startup...
- 08-Mar-19 11:05 PM Installing monitor overlays
- 08-Mar-19 11:05 PM Mounting disks
- 08-Mar-19 11:05 PM Assigning logical names
- 08-Mar-19 11:05 PM Starting error logging
- 08-Mar-19 11:05 PM Setting system characteristics
- 08-Mar-19 11:05 PM Installing run-time systems and libraries
- 08-Mar-19 11:05 PM Starting Operator/Message Services
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<<
- Message 10 from OMS, user [1,2], Detached, job 3
- Starting Operator/Message Services
- 08-Mar-19 11:05 PM Setting terminal characteristics
- 08-Mar-19 11:05 PM Defining system commands
- 08-Mar-19 11:05 PM Setting printer characteristics
- 08-Mar-19 11:05 PM Starting spoolers
- 08-Mar-19 11:05 PM Starting up DECnet/E V4.1
- Event type 2.0, Local node state change
- Occurred 23-Feb-32 23:05:07.0 on node 31.28 (RST101)
- Reason for state change: Operator command
- Old node state = Off
- New node state = On
- *** From RST101::[1,2] "[ 1, 2]" on KB0: at 11:05 PM 08-Mar-19
- ** RSTS/E is on the air...
- >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<<
- Message 11 from user [1,2] on _KB0:, job 2
- The system startup is complete
- Event type 4.15, Adjacency up
- Occurred 23-Feb-32 23:05:07.1 on node 31.28 (RST101)
- Circuit QNA-0
- Node address = 31.1023 (IMPRTR)
- RSTS V10.1-L 08-Mar-19 11:05 PM
- User: 1,2
- Password:
- Jobs detached under this account:
- Job What Size State Run-time RTS
- 1 ERRCPY 5K SR 0.0 ...RSX
- 3 OMS 9K SL 0.0 ...RSX
- 4 PBS... 19K SL 0.0 ...RSX
- 5 EVTLOG 18K SL 0.0 ...RSX
- Job number to attach to?
- Last interactive login on 08-Mar-19, 11:05 PM at KB0:
- Last non-interactive login on 08-Mar-19, 11:05 PM
- 4 other users are logged in under this account
- $
- $
- $ ncp
- NCP>show active lines
- Active Line Volatile Summary as of 8-MAR-19 23:05:28
- Line = QNA-0
- State = On
- NCP>
- NCP>
- NCP>show active circuits
- Active Circuit Volatile Summary as of 8-MAR-19 23:05:33
- Circuit = QNA-0
- State = On
- Adjacent Node = 31.1023 (IMPRTR)
- NCP>
- NCP>
- NCP>help
- Programs
- NCP
- NCP is the Network Control Program. It can be used to create, monitor,
- and modify the network parameters on the EXECUTOR node. Type HELP at
- the Topic? prompt for help in using this facility. For information
- about using NCP, request help on Commands or Parameters.
- Additional help is available on:
- ABORT CLEAR Commands DEFINE
- EVENTS EXIT HELP LIST
- LOOP PARAMETERS PURGE SET
- SHOW TELL ZERO
- Programs NCP Subtopic? set
- Programs
- NCP
- SET
- Use the SET command to create or modify parameters or components in the
- volatile database on the executor node. Use the DEFINE command to
- create or modify parameters or components in the permanent database on
- the executor node.
- Additional help is available on:
- CIRCUIT EXECUTOR LINE LOGGING
- NODE OBJECT
- Programs NCP SET Subtopic? node
- Programs
- NCP
- SET
- NODE
- Use the SET NODE command to create or modify node parameters in the
- volatile database on the local node. Use the DEFINE NODE command to
- create or modify node parameters in the permanent database on the
- local node.
- SET KNOWN NODES (parameters ...)
- NODE node-id
- Additional help is available on:
- KNOWN NODES NODE node-id ALL ADDRESS node-address
- CIRCUIT circuit-id COUNTER TIMER seconds
- NAME node-name RECEIVE ANSWER PASSWORD
- RECEIVE ORIGINATE PASSWORD TRANSMIT ANSWER PASSWORD
- TRANSMIT ORIGINATE PASSWORD Examples
- Programs NCP SET NODE Subtopic? ex
- Programs
- NCP
- SET
- NODE
- Examples
- NCP>SET NODE 5.14 NAME DENVER
- This command sets the node name of node 5.14 to DENVER.
- NCP>SET NODE 14 ADDRESS 2
- This command associates the information for node 1.14 with
- a new node whose address is 1.2. This example assumes
- that the executor is in area 1.
- PROGRAMS NCP SET NODE Subtopic?
- PROGRAMS NCP SET Subtopic?
- PROGRAMS NCP Subtopic?
- PROGRAMS Subtopic?
- Topic?
- NCP>
- NCP>exit
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement