Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 4096 MB Installed
- ProLiant System BIOS - I22 (07/02/2013)
- Copyright 1982, 2013 Hewlett-Packard Development Company, L.P.
- 1 Processor(s) detected, 2 total cores enabled
- Proc 1: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz
- QPI Speed: 4.8 GT/s
- HP Power Profile Mode: Balanced Power and Performance
- Power Regulator Mode: Dynamic Power Savings
- Advanced Memory Protection Mode: Advanced ECC Support
- ServerEngines 10Gb UNDI, PXE-2.0 BIOS v2.104.301.0lid backup system ROM.
- Copyright (C) 2006-2011 ServerEngines Corporation
- Configuring ServerEngines Controller Using DMTF CLP................
- Press "F9" key for ROM-Based Setup Utility
- Press "F10" key for System Maintenance Menu
- Press "F11" key for Default Boot Override Options
- Press "F12" key for Network Boot
- For access via BIOS Serial Console
- Press "ESC+9" for ROM-Based Setup Utility
- Press "ESC+0" for System Maintenance Menu
- Press "ESC+!" for Default Boot Override Options
- Press "ESC+@" for Network Boot
- +----------------------------------------------------------+
- Attempting Boot From Hard Drive (C:)
- Booting from local disk...
- PXE-M0F: Exiting Intel Boot Agent. T
- Probing EDD (edd=off to disable)... ok
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Initializing cgroup subsys cpuacct
- Linux version 3.10.6-1.el6.elrepo.x86_64 (mockbuild@Build64R6) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Mon Aug 12 23:45:59 EDT 2013
- Command line: ro root=/dev/mapper/os-root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_LVM_LV=os/root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto biosdevname=0 crashkernel=none rd_LVM_LV=os/swap rd_NO_DM console=tty0 console=ttyS0,9600n8 modprobe.blacklist=hpwdt nmi_watchdog=1
- e820: BIOS-provided physical RAM map:
- BIOS-e820: [mem 0x0000000000000000-0x0000000000096bff] usable
- BIOS-e820: [mem 0x0000000000096c00-0x000000000009ffff] reserved
- BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- BIOS-e820: [mem 0x0000000000100000-0x00000000e761efff] usable
- BIOS-e820: [mem 0x00000000e761f000-0x00000000e762bfff] ACPI data
- BIOS-e820: [mem 0x00000000e762c000-0x00000000e762cfff] usable
- BIOS-e820: [mem 0x00000000e762d000-0x00000000ebffffff] reserved
- BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
- BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
- BIOS-e820: [mem 0x0000000100000000-0x0000000117ffefff] usable
- NX (Execute Disable) protection: active
- SMBIOS 2.7 present.
- No AGP bridge found
- e820: last_pfn = 0x117fff max_arch_pfn = 0x400000000
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820: last_pfn = 0xe762d max_arch_pfn = 0x400000000
- found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
- init_memory_mapping: [mem 0x00000000-0x000fffff]
- init_memory_mapping: [mem 0x117c00000-0x117dfffff]
- init_memory_mapping: [mem 0x114000000-0x117bfffff]
- init_memory_mapping: [mem 0x100000000-0x113ffffff]
- init_memory_mapping: [mem 0x00100000-0xe761efff]
- init_memory_mapping: [mem 0xe762c000-0xe762cfff]
- init_memory_mapping: [mem 0x117e00000-0x117ffefff]
- RAMDISK: [mem 0x36ff3000-0x37feffff]
- crashkernel: memory value expected
- ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
- ACPI: XSDT 00000000e7620040 000AC (v01 HP ProLiant 00000002 ?? 0000162E)
- ACPI: FACP 00000000e7620140 000F4 (v03 HP ProLiant 00000002 ?? 0000162E)
- ACPI BIOS Bug: Warning: Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130328/tbfadt-653)
- ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130328/tbfadt-653)
- ACPI: DSDT 00000000e7620240 0231A (v01 HP DSDT 00000001 INTL 20030228)
- ACPI: FACS 00000000e761f100 00040
- ACPI: SPCR 00000000e761f140 00050 (v01 HP SPCRRBSU 00000001 ?? 0000162E)
- ACPI: MCFG 00000000e761f1c0 0003C (v01 HP ProLiant 00000001 00000000)
- ACPI: HPET 00000000e761f200 00038 (v01 HP ProLiant 00000002 ?? 0000162E)
- ACPI: FFFF 00000000e761f240 00064 (v02 HP ProLiant 00000002 ?? 0000162E)
- ACPI: SPMI 00000000e761f2c0 00040 (v05 HP ProLiant 00000001 ?? 0000162E)
- ACPI: ERST 00000000e761f300 001D0 (v01 HP ProLiant 00000001 ?? 0000162E)
- ACPI: APIC 00000000e761f500 0015E (v01 HP ProLiant 00000002 00000000)
- ACPI: SRAT 00000000e761f680 00570 (v01 HP Proliant 00000001 ?? 0000162E)
- ACPI: FFFF 00000000e761fc00 00176 (v01 HP ProLiant 00000001 ?? 0000162E)
- ACPI: BERT 00000000e761fd80 00030 (v01 HP ProLiant 00000001 ?? 0000162E)
- ACPI: HEST 00000000e761fdc0 000BC (v01 HP ProLiant 00000001 ?? 0000162E)
- ACPI: DMAR 00000000e761fe80 00106 (v01 HP ProLiant 00000001 ?? 0000162E)
- ACPI: SSDT 00000000e7622580 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
- ACPI: SSDT 00000000e76226c0 003BB (v01 HP pcc 00000001 INTL 20090625)
- ACPI: SSDT 00000000e7622a80 00377 (v01 HP pmab 00000001 INTL 20090625)
- ACPI: SSDT 00000000e7622e00 0058C (v01 INTEL PPM RCM 00000001 INTL 20061109)
- SRAT: PXM 1 -> APIC 0x10 -> Node 0
- SRAT: PXM 1 -> APIC 0x14 -> Node 0
- SRAT: Node 0 PXM 1 [mem 0x00000000-0xe7ffffff]
- SRAT: Node 0 PXM 1 [mem 0x100000000-0x117ffffff]
- NUMA: Node 0 [mem 0x00000000-0xe7ffffff] + [mem 0x100000000-0x117ffefff] -> [mem 0x00000000-0x117ffefff]
- Initmem setup node 0 [mem 0x00000000-0x117ffefff]
- NODE_DATA [mem 0x117fd8000-0x117ffefff]
- Zone ranges:
- DMA [mem 0x00001000-0x00ffffff]
- DMA32 [mem 0x01000000-0xffffffff]
- Normal [mem 0x100000000-0x117ffefff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00001000-0x00095fff]
- node 0: [mem 0x00100000-0xe761efff]
- node 0: [mem 0xe762c000-0xe762cfff]
- node 0: [mem 0x100000000-0x117ffefff]
- ACPI: PM-Timer IO Port: 0x908
- ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
- ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
- ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
- ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
- ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] disabled)
- ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] disabled)
- ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
- ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] disabled)
- ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] disabled)
- ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
- ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x06] disabled)
- ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] disabled)
- ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
- ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] disabled)
- ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] disabled)
- ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
- ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] disabled)
- ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] disabled)
- ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
- ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] disabled)
- ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] disabled)
- ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
- ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] disabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
- ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
- IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- smpboot: Allowing 32 CPUs, 30 hotplug CPUs
- PM: Registered nosave memory: 0000000000096000 - 0000000000097000
- PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- PM: Registered nosave memory: 00000000e761f000 - 00000000e762c000
- PM: Registered nosave memory: 00000000e762d000 - 00000000ec000000
- PM: Registered nosave memory: 00000000ec000000 - 00000000fec00000
- PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
- PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
- PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
- e820: [mem 0xec000000-0xfebfffff] available for PCI devices
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
- PERCPU: Embedded 29 pages/cpu @ffff880117800000 s86144 r8192 d24448 u131072
- Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031616
- Policy zone: Normal
- Kernel command line: ro root=/dev/mapper/os-root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_LVM_LV=os/root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto biosdevname=0 crashkernel=none rd_LVM_LV=os/swap rd_NO_DM console=tty0 console=ttyS0,9600n8 modprobe.blacklist=hpwdt nmi_watchdog=1
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Checking aperture...
- No AGP bridge found
- Memory: 4022500k/4587516k available (6130k kernel code, 403756k absent, 161260k reserved, 5246k data, 1868k init)
- Hierarchical RCU implementation.
- RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32.
- NR_IRQS:262400 nr_irqs:1344 16
- Console: colour VGA+ 80x25
- console [tty0] enabled
- console [ttyS0] enabled
- allocated 16777216 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- tsc: Fast TSC calibration using PIT
- tsc: Detected 1866.829 MHz processor
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.65 BogoMIPS (lpj=1866829)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- SELinux: Initializing.
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Mount-cache hash table entries: 256
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- Initializing cgroup subsys perf_event
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 0
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- tlb_flushall_shift: 6
- Freeing SMP alternatives: 20k freed
- ACPI: Core revision 20130328
- ACPI: All ACPI Tables successfully acquired
- ftrace: allocating 25177 entries in 99 pages
- dmar: Host address width 39
- dmar: DRHD base: 0x000000efffe000 flags: 0x1
- dmar: IOMMU 0: reg_base_addr efffe000 ver 1:0 cap c90780106f0462 ecap f0207e
- dmar: RMRR base: 0x000000e77fc000 end: 0x000000e77fdfff
- dmar: RMRR base: 0x000000e77f5000 end: 0x000000e77fafff
- dmar: ATSR flags: 0x0
- ------------[ cut here ]------------
- WARNING: at drivers/iommu/intel_irq_remapping.c:533 intel_irq_remapping_supported+0x35/0x75()
- This system BIOS has enabled interrupt remapping
- on a chipset that contains an erratum making that
- feature unstable. To maintain system stability
- interrupt remapping is being disabled. Please
- contact your BIOS vendor for an update
- Modules linked in:
- CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.6-1.el6.elrepo.x86_64 #1
- Hardware name: HP ProLiant BL280c G6, BIOS I22 07/02/2013
- ffffffff81879ba8 ffff8801122dfd28 ffffffff815ebdb6 ffff8801122dfd68
- ffffffff8105b2f0 0000000000000282 0000000000000246 00000000ffffffff
- 0000000000000000 000000000000b010 000000000000b008 ffff8801122dfdc8
- Call Trace:
- [<ffffffff815ebdb6>] dump_stack+0x19/0x1b
- [<ffffffff8105b2f0>] warn_slowpath_common+0x70/0xa0
- [<ffffffff8105b37f>] warn_slowpath_fmt_taint+0x3f/0x50
- [<ffffffff812a8a34>] ? find_next_bit+0x94/0xb0
- [<ffffffff81b8219f>] intel_irq_remapping_supported+0x35/0x75
- [<ffffffff814fab89>] irq_remapping_supported+0x29/0x40
- [<ffffffff81b486db>] enable_IR+0x9/0x3e
- [<ffffffff81b487a3>] enable_IR_x2apic+0x93/0x148
- [<ffffffff81b4c05c>] default_setup_apic_routing+0x15/0x6e
- [<ffffffff81b468d5>] native_smp_prepare_cpus+0x17a/0x280
- [<ffffffff81b34b2f>] kernel_init_freeable+0x1ce/0x279
- [<ffffffff815d7a60>] ? rest_init+0x80/0x80
- [<ffffffff815d7a6e>] kernel_init+0xe/0xf0
- [<ffffffff815f812c>] ret_from_fork+0x7c/0xb0
- [<ffffffff815d7a60>] ? rest_init+0x80/0x80
- ---[ end trace 4905534322db8cb4 ]---
- Switched APIC routing to physical flat.
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- smpboot: CPU0: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz (fam: 06, model: 1a, stepping: 05)
- Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Broken BIOS detected, complain to your hardware vendor.
- [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
- Intel PMU driver.
- perf_event_intel: CPU erratum AAJ80 worked around
- perf_event_intel: CPUID marked event: 'bus cycles' unavailable
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- smpboot: Booting Node 0, Processors #1
- Brought up 2 CPUs
- smpboot: Total of 2 processors activated (7467.31 BogoMIPS)
- NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- devtmpfs: initialized
- regulator-dummy: no parameters
- NET: Registered protocol family 16
- ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- ACPI: bus type PCI registered
- PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe8000000-0xebffffff] (base 0xe8000000)
- PCI: MMCONFIG at [mem 0xe8000000-0xebffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: Interpreter enabled
- ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
- ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
- ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
- ACPI: (supports S0 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- HEST: Table parsing has been initialized.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f])
- acpi PNP0A03:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-0f]
- pci_bus 0000:00: root bus resource [mem 0xef000000-0xfbffffff]
- pci_bus 0000:00: root bus resource [io 0x1000-0x5fff]
- pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
- pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
- pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
- pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
- pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
- pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
- pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- pci 0000:00:1f.0: quirk: [io 0x0900-0x097f] claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0300 (mask 001f)
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 007f)
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0800 (mask 007f)
- pci 0000:00:01.0: PCI bridge to [bus 0c]
- pci 0000:00:02.0: PCI bridge to [bus 0d]
- pci 0000:00:03.0: PCI bridge to [bus 02]
- pci 0000:00:07.0: PCI bridge to [bus 03-05]
- pci 0000:00:08.0: PCI bridge to [bus 0e]
- pci 0000:00:09.0: PCI bridge to [bus 06-08]
- pci 0000:00:0a.0: PCI bridge to [bus 0f]
- pci 0000:00:1c.0: PCI bridge to [bus 09-0b]
- pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
- acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
- ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 *11)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 5 *7 10 11)
- ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
- vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:03.0
- SCSI subsystem initialized
- ACPI: bus type ATA registered
- ACPI: bus type USB registered
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: Discovered peer bus 3e
- PCI host bridge to bus 0000:3e
- pci_bus 0000:3e: root bus resource [io 0x0000-0xffff]
- pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff]
- pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff]
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type PNP registered
- system 00:00: [io 0x0408-0x040f] has been reserved
- system 00:00: [io 0x04d0-0x04d1] has been reserved
- system 00:00: [io 0x0700-0x071f] has been reserved
- system 00:00: [io 0x0880-0x08ff] could not be reserved
- system 00:00: [io 0x0900-0x097f] has been reserved
- system 00:00: [io 0x0c80-0x0c83] has been reserved
- system 00:00: [io 0x0cd4-0x0cd7] has been reserved
- system 00:00: [io 0x0f50-0x0f58] has been reserved
- system 00:00: [io 0x0ca0-0x0ca1] has been reserved
- system 00:00: [io 0x0ca4-0x0ca5] has been reserved
- system 00:00: [io 0x03f8-0x03ff] has been reserved
- system 00:00: [mem 0xe8000000-0xebffffff] has been reserved
- system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
- system 00:00: [mem 0xefffe000-0xefffffff] could not be reserved
- pnp: PnP ACPI: found 10 devices
- ACPI: bus type PNP unregistered
- pci 0000:00:03.0: BAR 15: assigned [mem 0xef000000-0xef0fffff pref]
- pci 0000:00:07.0: BAR 15: assigned [mem 0xef100000-0xef4fffff pref]
- pci 0000:00:09.0: BAR 15: assigned [mem 0xef500000-0xef5fffff pref]
- pci 0000:00:1c.0: BAR 14: assigned [mem 0xef600000-0xef7fffff]
- pci 0000:00:1c.0: BAR 15: assigned [mem 0xef800000-0xef9fffff 64bit pref]
- pci 0000:00:1c.0: BAR 13: can't assign io (size 0x1000)
- pci 0000:00:01.0: PCI bridge to [bus 0c]
- pci 0000:00:02.0: PCI bridge to [bus 0d]
- pci 0000:02:00.0: BAR 6: assigned [mem 0xef000000-0xef01ffff pref]
- pci 0000:02:00.1: BAR 6: assigned [mem 0xef020000-0xef03ffff pref]
- pci 0000:02:00.0: BAR 7: assigned [mem 0xfb900000-0xfb91ffff 64bit]
- pci 0000:02:00.0: BAR 10: assigned [mem 0xfb920000-0xfb93ffff 64bit]
- pci 0000:02:00.1: BAR 7: can't assign mem (size 0x20000)
- pci 0000:02:00.1: BAR 10: can't assign mem (size 0x20000)
- pci 0000:00:03.0: PCI bridge to [bus 02]
- pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
- pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfb9fffff]
- pci 0000:00:03.0: bridge window [mem 0xef000000-0xef0fffff pref]
- pci 0000:03:00.0: BAR 6: assigned [mem 0xef100000-0xef17ffff pref]
- pci 0000:03:00.1: BAR 6: assigned [mem 0xef180000-0xef1fffff pref]
- pci 0000:03:00.2: BAR 6: assigned [mem 0xef200000-0xef27ffff pref]
- pci 0000:03:00.3: BAR 6: assigned [mem 0xef280000-0xef2fffff pref]
- pci 0000:03:00.4: BAR 6: assigned [mem 0xef300000-0xef37ffff pref]
- pci 0000:03:00.5: BAR 6: assigned [mem 0xef380000-0xef3fffff pref]
- pci 0000:03:00.6: BAR 6: assigned [mem 0xef400000-0xef47ffff pref]
- pci 0000:03:00.7: BAR 6: assigned [mem 0xef480000-0xef4fffff pref]
- pci 0000:00:07.0: PCI bridge to [bus 03-05]
- pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbcfffff]
- pci 0000:00:07.0: bridge window [mem 0xef100000-0xef4fffff pref]
- pci 0000:00:08.0: PCI bridge to [bus 0e]
- pci 0000:06:00.0: BAR 6: assigned [mem 0xef500000-0xef57ffff pref]
- pci 0000:00:09.0: PCI bridge to [bus 06-08]
- pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
- pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbffffff]
- pci 0000:00:09.0: bridge window [mem 0xef500000-0xef5fffff pref]
- pci 0000:00:0a.0: PCI bridge to [bus 0f]
- pci 0000:00:1c.0: PCI bridge to [bus 09-0b]
- pci 0000:00:1c.0: bridge window [mem 0xef600000-0xef7fffff]
- pci 0000:00:1c.0: bridge window [mem 0xef800000-0xef9fffff 64bit pref]
- pci 0000:01:03.0: BAR 6: assigned [mem 0xfb700000-0xfb71ffff pref]
- pci 0000:01:04.2: BAR 6: assigned [mem 0xfb720000-0xfb72ffff pref]
- pci 0000:00:1e.0: PCI bridge to [bus 01]
- pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
- pci 0000:00:1e.0: bridge window [mem 0xfb700000-0xfb8fffff]
- pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- pci 0000:00:03.0: PCI bridge to [bus 02]
- pci 0000:00:03.0: BAR 14: assigned [mem 0xefa00000-0xefbfffff]
- pci 0000:00:1c.0: BAR 13: can't assign io (size 0x1000)
- pci 0000:00:1c.0: BAR 13: can't assign io (size 0x1000)
- pci 0000:00:01.0: PCI bridge to [bus 0c]
- pci 0000:00:02.0: PCI bridge to [bus 0d]
- pci 0000:02:00.0: BAR 0: assigned [mem 0xefa00000-0xefa1ffff]
- pci 0000:02:00.0: BAR 1: assigned [mem 0xefa20000-0xefa3ffff]
- pci 0000:02:00.1: BAR 0: assigned [mem 0xefa40000-0xefa5ffff]
- pci 0000:02:00.1: BAR 1: assigned [mem 0xefa60000-0xefa7ffff]
- pci 0000:02:00.0: BAR 3: assigned [mem 0xefa80000-0xefa83fff]
- pci 0000:02:00.0: BAR 7: assigned [mem 0xefa84000-0xefaa3fff 64bit]
- pci 0000:02:00.0: BAR 10: assigned [mem 0xefaa4000-0xefac3fff 64bit]
- pci 0000:02:00.1: BAR 3: assigned [mem 0xefac4000-0xefac7fff]
- pci 0000:02:00.1: BAR 7: assigned [mem 0xefac8000-0xefae7fff 64bit]
- pci 0000:02:00.1: BAR 10: assigned [mem 0xefae8000-0xefb07fff 64bit]
- pci 0000:00:03.0: PCI bridge to [bus 02]
- pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
- pci 0000:00:03.0: bridge window [mem 0xefa00000-0xefbfffff]
- pci 0000:00:03.0: bridge window [mem 0xef000000-0xef0fffff 64bit pref]
- pci 0000:00:07.0: PCI bridge to [bus 03-05]
- pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbcfffff]
- pci 0000:00:07.0: bridge window [mem 0xef100000-0xef4fffff 64bit pref]
- pci 0000:00:08.0: PCI bridge to [bus 0e]
- pci 0000:00:09.0: PCI bridge to [bus 06-08]
- pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
- pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbffffff]
- pci 0000:00:09.0: bridge window [mem 0xef500000-0xef5fffff 64bit pref]
- pci 0000:00:0a.0: PCI bridge to [bus 0f]
- pci 0000:00:1c.0: PCI bridge to [bus 09-0b]
- pci 0000:00:1c.0: bridge window [mem 0xef600000-0xef7fffff]
- pci 0000:00:1c.0: bridge window [mem 0xef800000-0xef9fffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 01]
- pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
- pci 0000:00:1e.0: bridge window [mem 0xfb700000-0xfb8fffff]
- pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off
- NET: Registered protocol family 2
- TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 32768 bind 32768)
- TCP: reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 16372k freed
- IOMMU 0 0xefffe000: using Queued invalidation
- IOMMU: Setting RMRR:
- IOMMU: Setting identity map for device 0000:00:1d.0 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:00:1d.1 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:00:1d.2 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:00:1d.3 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:01:04.0 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:01:04.2 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:01:04.4 [0xe77f5000 - 0xe77fafff]
- IOMMU: Setting identity map for device 0000:00:1d.7 [0xe77fc000 - 0xe77fdfff]
- IOMMU: Prepare 0-16MiB unity mapping for LPC
- IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
- PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
- audit: initializing netlink socket (disabled)
- type=2000 audit(1383236037.235:1): initialized
- bounce pool size: 64 pages
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 8017
- alg: No test for stdrng (krng)
- Key type asymmetric registered
- Asymmetric key parser 'x509' registered
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- ACPI: Power Button [PWRF]
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [THM0] (8 C)
- ERST: Failed to get Error Log Address Range.
- GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- !"#$%&'()*+,-./01ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]nopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- [drm] Initialized drm 1.1.0 20060810
- brd: module loaded
- loop: module loaded
- libphy: Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ehci-pci 0000:00:1d.7: EHCI Host Controller
- ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci-pci 0000:00:1d.7: debug port 1
- ehci-pci 0000:00:1d.7: irq 20, io mem 0xfb6f0000
- ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- ehci-platform: EHCI generic platform driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.3
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- uhci_hcd 0000:01:04.4: UHCI Host Controller
- uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
- uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
- usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb6: Product: UHCI Host Controller
- usb usb6: Manufacturer: Linux 3.10.6-1.el6.elrepo.x86_64 uhci_hcd
- usb usb6: SerialNumber: 0000:01:04.4
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:09: RTC can wake from S4
- rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
- rtc_cmos 00:09: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- ledtrig-cpu: registered to indicate activity on CPUs
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP: cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- registered taskstats version 1
- IMA: No TPM chip found, activating TPM-bypass!
- rtc_cmos 00:09: setting system clock to 2013-10-31 16:13:58 UTC (1383236038)
- Freeing unused kernel memory: 1868k freed
- Write protecting the kernel read-only data: 10240k
- Freeing unused kernel memory: 4k freed
- Freeing unused kernel memory: 1168k freed
- dracut: dracut-004-303.el6
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- udev: starting version 147
- udevd (82): /proc/82/oom_adj is deprecated, please use /proc/82/oom_score_adj instead.
- [drm] radeon kernel modesetting enabled.
- [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
- [drm] register mmio base: 0xFB8F0000
- [drm] register mmio size: 65536
- radeon 0000:01:03.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (64M used)
- radeon 0000:01:03.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF
- [drm] Detected VRAM RAM=128M, BAR=128M
- [drm] RAM width 16bits DDR
- [TTM] Zone kernel: Available graphics memory: 2053942 kiB
- [TTM] Initializing pool allocator
- [TTM] Initializing DMA pool allocator
- [drm] radeon: 64M of VRAM memory ready
- [drm] radeon: 512M of GTT memory ready.
- [drm] GART: num cpu pages 131072, num gpu pages 131072
- [drm] PCI GART of 512M enabled (table at 0x00000000FFF00000).
- radeon 0000:01:03.0: WB disabled
- radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xffff8800e7002000
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- [drm] radeon: irq initialized.
- [drm] Loading R100 Microcode
- [drm] radeon: ring at 0x00000000D0001000
- [drm] ring test succeeded in 1 usecs
- usb 6-1: new full-speed USB device number 2 using uhci_hcd
- usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
- usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 6-1: Product: Virtual Keyboard
- usb 6-1: Manufacturer: HP
- input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input1
- hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
- input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input2
- hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
- tsc: Refined TSC clocksource calibration: 1866.732 MHz
- Switching to clocksource tsc
- [drm] ib test succeeded in 0 usecs
- [drm] No TV DAC info found in BIOS
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] VGA-1
- [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
- [drm] Encoders:
- [drm] CRT1: INTERNAL_DAC1
- [drm] Connector 1:
- [drm] VGA-2
- [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
- [drm] Encoders:
- [drm] CRT2: INTERNAL_DAC2
- [drm] fb mappable at 0xF0040000
- [drm] vram apper at 0xF0000000
- [drm] size 786432
- [drm] fb depth is 8
- [drm] pitch is 1024
- fbcon: radeondrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x48
- radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device
- radeon 0000:01:03.0: registered panic notifier
- [drm] Initialized radeon 2.33.0 20080528 for 0000:01:03.0 on minor 0
- dracut: Starting plymouth daemon
- dracut: rd_NO_MD: removing MD RAID activation
- Gata_piix 0000:00:1f.2: MAP [
- P0 P2 P1 P3 ]
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 20
- ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 20
- ata2.00: SATA link down (SStatus 4 SControl 300)
- ata2.01: SATA link down (SStatus 4 SControl 300)
- ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.01: SATA link down (SStatus 4 SControl 300)
- ata1.00: ATA-7: GJ0120CAGSP, HPG2, max UDMA/100
- ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA GJ0120CAGSP HPG2 PQ: 0 ANSI: 5
- HP HPSA Driver (v 2.0.2-1)
- hpsa 0000:06:00.0: MSIX
- hpsa 0000:06:00.0: hpsa0: <0x323a> at IRQ 66 using DAC
- scsi2 : hpsa
- hpsa 0000:06:00.0: RAID device c2b3t0l0 added.
- hpsa 0000:06:00.0: Direct-Access device c2b0t0l0 added.
- scsi 2:3:0:0: RAID HP P711m 6.40 PQ: 0 ANSI: 5
- scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 6.40 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 2:0:0:0: [sdb] 286611840 512-byte logical blocks: (146 GB/136 GiB)
- sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- sd 2:0:0:0: [sdb] Write Protect is off
- sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- sdb: sdb1 sdb2 sdb3 sdb4
- sd 2:0:0:0: [sdb] Attached SCSI disk
- sda: sda1 sda2 sda3 sda4 sda5 sda6
- sd 0:0:0:0: [sda] Attached SCSI disk
- FATAL: Module scsi_wait_scan not found.
- dracut: Scanning devices sda5 sda6 for LVM logical volumes os/root os/swap
- dracut: inactive '/dev/os/root' [55.88 GiB] inherit
- dracut: inactive '/dev/os/swap' [4.00 GiB] inherit
- bio: create slab <bio-1> at 1
- EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
- dracut: Mounted root filesystem /dev/mapper/os-root
- SELinux: Disabled at runtime.
- type=1404 audit(1383236041.764:2): selinux=0 auid=4294967295 ses=4294967295
- dracut:
- dracut: Switching root
- Welcome to CentOS
- Starting udev: udev: starting version 147
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- dca service started, version 1.12.1
- igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
- igb: Copyright (c) 2007-2013 Intel Corporation.
- igb 0000:02:00.0: added PHC on eth0
- igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:b3:26:f2:58
- igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
- igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
- igb 0000:02:00.1: added PHC on eth1
- igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:b3:26:f2:59
- igb 0000:02:00.1: eth1: PBA No: FFFFFF-0FF
- igb 0000:02:00.1: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
- Gpower_meter ACPI000D:00: Found ACPI power meter.
- power_meter ACPI000D:00: Ignoring unsafe software power cap!
- be2net 0000:03:00.0: enabled 2 MSI-x vector(s)
- be2net 0000:03:00.0: created 2 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.0: created 1 TX queue(s)
- be2net 0000:03:00.0: device doesn't support SRIOV
- be2net 0000:03:00.0: Emulex OneConnect: PF FLEX10 port 0
- be2net 0000:03:00.1: enabled 2 MSI-x vector(s)
- be2net 0000:03:00.1: created 2 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.1: created 1 TX queue(s)
- be2net 0000:03:00.1: device doesn't support SRIOV
- be2net 0000:03:00.1: Emulex OneConnect: PF FLEX10 port 1
- be2net 0000:03:00.2: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.2: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.2: created 1 TX queue(s)
- be2net 0000:03:00.2: device doesn't support SRIOV
- be2net 0000:03:00.2: Emulex OneConnect: PF FLEX10 port 0
- be2net 0000:03:00.3: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.3: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.3: created 1 TX queue(s)
- be2net 0000:03:00.3: device doesn't support SRIOV
- be2net 0000:03:00.3: Emulex OneConnect: PF FLEX10 port 1
- be2net 0000:03:00.4: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.4: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.4: created 1 TX queue(s)
- be2net 0000:03:00.4: device doesn't support SRIOV
- be2net 0000:03:00.4: Emulex OneConnect: PF FLEX10 port 0
- be2net 0000:03:00.5: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.5: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.5: created 1 TX queue(s)
- be2net 0000:03:00.5: device doesn't support SRIOV
- be2net 0000:03:00.5: Emulex OneConnect: PF FLEX10 port 1
- be2net 0000:03:00.6: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.6: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.6: created 1 TX queue(s)
- be2net 0000:03:00.6: device doesn't support SRIOV
- be2net 0000:03:00.6: Emulex OneConnect: PF FLEX10 port 0
- be2net 0000:03:00.7: enabled 1 MSI-x vector(s)
- be2net 0000:03:00.7: created 0 RSS queue(s) and 1 default RX queue
- be2net 0000:03:00.7: created 1 TX queue(s)
- be2net 0000:03:00.7: device doesn't support SRIOV
- be2net 0000:03:00.7: Emulex OneConnect: PF FLEX10 port 1
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 2:3:0:0: Attached scsi generic sg1 type 12
- sd 2:0:0:0: Attached scsi generic sg2 type 0
- EDAC MC: Ver: 3.0.0
- EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3e:03.0
- EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3e:03.0' (POLLED)
- EDAC i7core: Driver loaded, 1 memory controller(s) found.
- md: bind<sdb3>
- ACPI Warning: 0x0000000000000928-0x000000000000092f SystemIO conflicts with Region \SGPE 1 (20130328/utaddress-251)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- lpc_ich: Resource conflict(s) found affecting gpio_ich
- input: PC Speaker as /devices/platform/pcspkr/input/input3
- microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x19
- md: bind<sda3>
- md: kicking non-fresh sdb3 from array!
- md: unbind<sdb3>
- md: export_rdev(sdb3)
- microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x19
- microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- md: raid1 personality registered for level 1
- md/raid1:md0: active with 1 out of 2 mirrors
- md0: detected capacity change from 0 to 209649664
- md0: unknown partition table
- kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
- hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
- hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.1, timer margin: 30 seconds (nowayout=0).
- ipmi message handler version 39.2
- IPMI System Interface driver.
- ipmi_si 0000:01:04.6: probing via PCI
- ipmi_si 0000:01:04.6: [mem 0xfb7f0000-0xfb7f00ff] regsize 1 spacing 1 irq 21
- ipmi_si: Adding PCI-specified kcs state machine
- ipmi_si: probing via ACPI
- ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
- ipmi_si: Adding ACPI-specified kcs state machine
- ipmi_si: probing via SMBIOS
- ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
- ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
- ipmi_si: probing via SPMI
- ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
- ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
- ipmi_si: Trying PCI-specified kcs state machine at mem address 0xfb7f0000, slave address 0x0, irq 21
- ipmi_si 0000:01:04.6: Using irq 21
- ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2020, dev_id: 0x11)
- ipmi_si 0000:01:04.6: IPMI kcs interface initialized
- gpio_ich: GPIO from 195 to 255 on gpio_ich
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
- iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
- [ OK ]
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- NET: Registered protocol family 10
- Setting hostname node-45.mumms.com: [ OK ]
- Setting up Logical Volume Management: 0 logical volume(s) in volume group "cinder" now active
- 2 logical volume(s) in volume group "os" now active
- [ OK ]
- Checking filesystems
- Checking all file systems.
- [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/os-root
- /dev/mapper/os-root: clean, 45250/3661824 files, 497142/14647296 blocks
- [/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a /dev/md0
- /dev/md0 was not cleanly unmounted, check forced.
- /dev/md0: 37/51200 files (2.7% non-contiguous), 32973/204736 blocks
- [PASSED]
- Remounting root filesystem in read-write mode: EXT4-fs (dm-0): re-mounted. Opts: (null)
- [ OK ]
- Mounting local filesystems: mount: mount point none does not exist
- mount: mount point none does not exist
- [FAILED]
- Enabling /etc/fstab swaps: Adding 4194300k swap on /dev/mapper/os-swap. Priority:-1 extents:1 across:4194300k FS
- [ OK ]
- Entering non-interactive startup
- Starting monitoring for VG cinder: [ OK ]
- Starting monitoring for VG os: 2 logical volume(s) in volume group "os" monitored
- [ OK ]
- Bringing up loopback interface: [ OK ]
- Bringing up interface eth0: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Error, some other host already uses address 10.62.12.49.
- [FAILED]
- Starting auditd: [ OK ]
- Starting system logger: [ OK ]
- Starting mdmonitor: [ OK ]
- Mounting other filesystems: mount: mount point none does not exist
- mount: mount point none does not exist
- [FAILED]
- Retrigger failed udev events[ OK ]
- Starting sshd: [ OK ]
- ntpdate: Synchronizing with time server: [FAILED]
- Starting ntpd: [ OK ]
- Starting postfix: [ OK ]
- Starting mcollective: [ OK ]
- Starting crond: [ OK ]
- Kernel panic - not syncing: An NMI occurred, please see the Integrated Management Log for details.
- CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.10.6-1.el6.elrepo.x86_64 #1
- Hardware name: HP ProLiant BL280c G6, BIOS I22 07/02/2013
- 0000000000000000 ffff880117807d98 ffffffff815ebdb6 ffff880117807e18
- ffffffff815ebb57 ffffc90000000008 ffff880117807e28 ffff880117807dc8
- 0000000000000000 0000000000000000 0000000000000000 ffffc90004792072
- Call Trace:
- <NMI> [<ffffffff815ebdb6>] dump_stack+0x19/0x1b
- [<ffffffff815ebb57>] panic+0xc4/0x1e4
- [<ffffffffa03438d5>] hpwdt_pretimeout+0xc5/0xd0 [hpwdt]
- [<ffffffff815f085a>] nmi_handle+0x5a/0x80
- [<ffffffff815f0a7f>] default_do_nmi+0x14f/0x210
- [<ffffffff815f0bd0>] do_nmi+0x90/0xe0
- [<ffffffff815efe81>] end_repeat_nmi+0x1e/0x2e
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- <<EOE>> [<ffffffff814c9507>] cpuidle_enter_state+0x47/0xd0
- [<ffffffff814c996d>] cpuidle_idle_call+0xcd/0x160
- [<ffffffff8101ad3e>] arch_cpu_idle+0xe/0x30
- [<ffffffff810ae609>] cpu_idle_loop+0x69/0x210
- [<ffffffff810ae820>] cpu_startup_entry+0x70/0x80
- [<ffffffff815d7a57>] rest_init+0x77/0x80
- [<ffffffff81b35260>] start_kernel+0x449/0x456
- [<ffffffff81b34c35>] ? repair_env_string+0x5b/0x5b
- [<ffffffff81b345f1>] x86_64_start_reservations+0x2a/0x2c
- [<ffffffff81b34737>] x86_64_start_kernel+0x144/0x153
- drm_kms_helper: panic occurred, switching back to text console
- ------------[ cut here ]------------
- WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common+0xcf/0xe0()
- Modules linked in: ext2 nf_conntrack_ipv6 nf_defrag_ipv6 ipv6 nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iTCO_wdt iTCO_vendor_support gpio_ich ipmi_si ipmi_msghandler hpilo hpwdt coretemp freq_table mperf kvm_intel kvm crc32c_intel raid1 microcode pcspkr serio_raw lpc_ich i7core_edac edac_core sg be2net acpi_power_meter igb dca ptp pps_core ext4 jbd2 mbcache sd_mod crc_t10dif hpsa pata_acpi ata_generic ata_piix radeon ttm drm_kms_helper hwmon dm_mirror dm_region_hash dm_log dm_mod
- CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.10.6-1.el6.elrepo.x86_64 #1
- Hardware name: HP ProLiant BL280c G6, BIOS I22 07/02/2013
- ffffffff8181ac57 ffff880117803eb8 ffffffff815ebdb6 ffff880117803ef8
- ffffffff8105b2f0 ffff880117422104 0000000000000082 ffff88011780eae0
- 0000000000000000 0000000000000000 00000000000492d0 ffff880117803f08
- Call Trace:
- <IRQ> [<ffffffff815ebdb6>] dump_stack+0x19/0x1b
- [<ffffffff8105b2f0>] warn_slowpath_common+0x70/0xa0
- [<ffffffff8105b33a>] warn_slowpath_null+0x1a/0x20
- [<ffffffff810ee16f>] rcu_eqs_exit_common+0xcf/0xe0
- [<ffffffff810ee1ff>] rcu_irq_enter+0x7f/0xb0
- [<ffffffff8106391b>] irq_enter+0x1b/0x80
- [<ffffffff8101666e>] smp_irq_work_interrupt+0xe/0x40
- [<ffffffff815f935d>] irq_work_interrupt+0x6d/0x80
- <EOI> <NMI> [<ffffffff8117d8d5>] ? cache_grow+0x85/0x2e0
- [<ffffffff8117d89e>] ? cache_grow+0x4e/0x2e0
- [<ffffffff8117ddd8>] cache_alloc_refill+0x2a8/0x310
- [<ffffffff8117ec90>] __kmalloc+0x150/0x2c0
- [<ffffffffa003bd4e>] ? kzalloc.clone.0+0xe/0x10 [drm_kms_helper]
- [<ffffffffa003bd4e>] kzalloc.clone.0+0xe/0x10 [drm_kms_helper]
- [<ffffffffa003bf5e>] drm_crtc_helper_set_config+0x20e/0xb50 [drm_kms_helper]
- [<ffffffffa03926bf>] ? kcs_event+0x29f/0x630 [ipmi_si]
- [<ffffffff813b73fe>] drm_mode_set_config_internal+0x2e/0x60
- [<ffffffffa00399ac>] drm_fb_helper_restore_fbdev_mode+0x4c/0x70 [drm_kms_helper]
- [<ffffffffa0039ad8>] drm_fb_helper_panic+0x78/0xa0 [drm_kms_helper]
- [<ffffffff815f3745>] notifier_call_chain+0x55/0x80
- [<ffffffff815f3782>] __atomic_notifier_call_chain+0x12/0x20
- [<ffffffff815f37a6>] atomic_notifier_call_chain+0x16/0x20
- [<ffffffff815ebb85>] panic+0xf2/0x1e4
- [<ffffffffa03438d5>] hpwdt_pretimeout+0xc5/0xd0 [hpwdt]
- [<ffffffff815f085a>] nmi_handle+0x5a/0x80
- [<ffffffff815f0a7f>] default_do_nmi+0x14f/0x210
- [<ffffffff815f0bd0>] do_nmi+0x90/0xe0
- [<ffffffff815efe81>] end_repeat_nmi+0x1e/0x2e
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- <<EOE>> [<ffffffff814c9507>] cpuidle_enter_state+0x47/0xd0
- [<ffffffff814c996d>] cpuidle_idle_call+0xcd/0x160
- [<ffffffff8101ad3e>] arch_cpu_idle+0xe/0x30
- [<ffffffff810ae609>] cpu_idle_loop+0x69/0x210
- [<ffffffff810ae820>] cpu_startup_entry+0x70/0x80
- [<ffffffff815d7a57>] rest_init+0x77/0x80
- [<ffffffff81b35260>] start_kernel+0x449/0x456
- [<ffffffff81b34c35>] ? repair_env_string+0x5b/0x5b
- [<ffffffff81b345f1>] x86_64_start_reservations+0x2a/0x2c
- [<ffffffff81b34737>] x86_64_start_kernel+0x144/0x153
- ---[ end trace 4905534322db8cb6 ]---
- ------------[ cut here ]------------
- WARNING: at kernel/rcutree.c:363 rcu_eqs_enter_common+0xd9/0xf0()
- Modules linked in: ext2 nf_conntrack_ipv6 nf_defrag_ipv6 ipv6 nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iTCO_wdt iTCO_vendor_support gpio_ich ipmi_si ipmi_msghandler hpilo hpwdt coretemp freq_table mperf kvm_intel kvm crc32c_intel raid1 microcode pcspkr serio_raw lpc_ich i7core_edac edac_core sg be2net acpi_power_meter igb dca ptp pps_core ext4 jbd2 mbcache sd_mod crc_t10dif hpsa pata_acpi ata_generic ata_piix radeon ttm drm_kms_helper hwmon dm_mirror dm_region_hash dm_log dm_mod
- CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W I 3.10.6-1.el6.elrepo.x86_64 #1
- Hardware name: HP ProLiant BL280c G6, BIOS I22 07/02/2013
- ffffffff8181ac57 ffff880117803ec8 ffffffff815ebdb6 ffff880117803f08
- ffffffff8105b2f0 0000000000000082 ffff88011780eae0 ffff88011780eae0
- 0000000000000001 0000000000000000 00000000000492d0 ffff880117803f18
- Call Trace:
- <IRQ> [<ffffffff815ebdb6>] dump_stack+0x19/0x1b
- [<ffffffff8105b2f0>] warn_slowpath_common+0x70/0xa0
- [<ffffffff8105b33a>] warn_slowpath_null+0x1a/0x20
- [<ffffffff810ee3c9>] rcu_eqs_enter_common+0xd9/0xf0
- [<ffffffff810ee460>] rcu_irq_exit+0x80/0xb0
- [<ffffffff81063d5a>] irq_exit+0x7a/0xd0
- [<ffffffff81016694>] smp_irq_work_interrupt+0x34/0x40
- [<ffffffff815f935d>] irq_work_interrupt+0x6d/0x80
- <EOI> <NMI> [<ffffffff8117d8d5>] ? cache_grow+0x85/0x2e0
- [<ffffffff8117d89e>] ? cache_grow+0x4e/0x2e0
- [<ffffffff8117ddd8>] cache_alloc_refill+0x2a8/0x310
- [<ffffffff8117ec90>] __kmalloc+0x150/0x2c0
- [<ffffffffa003bd4e>] ? kzalloc.clone.0+0xe/0x10 [drm_kms_helper]
- [<ffffffffa003bd4e>] kzalloc.clone.0+0xe/0x10 [drm_kms_helper]
- [<ffffffffa003bf5e>] drm_crtc_helper_set_config+0x20e/0xb50 [drm_kms_helper]
- [<ffffffffa03926bf>] ? kcs_event+0x29f/0x630 [ipmi_si]
- [<ffffffff813b73fe>] drm_mode_set_config_internal+0x2e/0x60
- [<ffffffffa00399ac>] drm_fb_helper_restore_fbdev_mode+0x4c/0x70 [drm_kms_helper]
- [<ffffffffa0039ad8>] drm_fb_helper_panic+0x78/0xa0 [drm_kms_helper]
- [<ffffffff815f3745>] notifier_call_chain+0x55/0x80
- [<ffffffff815f3782>] __atomic_notifier_call_chain+0x12/0x20
- [<ffffffff815f37a6>] atomic_notifier_call_chain+0x16/0x20
- [<ffffffff815ebb85>] panic+0xf2/0x1e4
- [<ffffffffa03438d5>] hpwdt_pretimeout+0xc5/0xd0 [hpwdt]
- [<ffffffff815f085a>] nmi_handle+0x5a/0x80
- [<ffffffff815f0a7f>] default_do_nmi+0x14f/0x210
- [<ffffffff815f0bd0>] do_nmi+0x90/0xe0
- [<ffffffff815efe81>] end_repeat_nmi+0x1e/0x2e
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- [<ffffffff813081f9>] ? intel_idle+0x99/0xe0
- <<EOE>> [<ffffffff814c9507>] cpuidle_enter_state+0x47/0xd0
- [<ffffffff814c996d>] cpuidle_idle_call+0xcd/0x160
- [<ffffffff8101ad3e>] arch_cpu_idle+0xe/0x30
- [<ffffffff810ae609>] cpu_idle_loop+0x69/0x210
- [<ffffffff810ae820>] cpu_startup_entry+0x70/0x80
- [<ffffffff815d7a57>] rest_init+0x77/0x80
- [<ffffffff81b35260>] start_kernel+0x449/0x456
- [<ffffffff81b34c35>] ? repair_env_string+0x5b/0x5b
- [<ffffffff81b345f1>] x86_64_start_reservations+0x2a/0x2c
- [<ffffffff81b34737>] x86_64_start_kernel+0x144/0x153
- ---[ end trace 4905534322db8cb7 ]---
- dmar: DRHD: handling fault status reg 2
- dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr e763e000
- DMAR:[fault reason 06] PTE Read access is not set
- dmar: DMAR:[DMA Read] Request device [00:1e.0] fault addr f4000
- DMAR:[fault reason 06] PTE Read access is not set
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement