API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 21st, 2022
35
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 43.38 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)
  2. Trying to boot from MMC1
  3.  
  4.  
  5. U-Boot 2021.10-gc2b239f7 (Dec 17 2021 - 16:57:21 +0000)
  6.  
  7. CPU  : AM335X-GP rev 2.1
  8. Model: TI AM335x BeagleBone Black
  9. DRAM:  512 MiB
  10. Reset Source: Power-on reset has occurred.
  11. RTC 32KCLK Source: Internal.
  12. WDT:   Started with servicing (60s timeout)
  13. MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
  14. Loading Environment from EXT4... ** File not found /boot/uboot.env **
  15.  
  16. ** Unable to read "/boot/uboot.env" from mmc0:1 **
  17. Model: BeagleBoard.org PocketBeagle
  18. <ethaddr> not set. Validating first E-fuse MAC
  19. Net:   Could not get PHY for ethernet@4a100000: addr 0
  20. eth2: ethernet@4a100000, eth3: usb_ether
  21. Press SPACE to abort autoboot in 0 seconds
  22. board_name=[A335PBGL] ...
  23. switch to partitions #0, OK
  24. mmc0 is current device
  25. SD/MMC found on device 0
  26. Couldn't find partition 0:2 0x82000000
  27. Can't set block device
  28. Couldn't find partition 0:2 0x82000000
  29. Can't set block device
  30. switch to partitions #0, OK
  31. mmc0 is current device
  32. Scanning mmc 0:1...
  33. libfdt fdt_check_header(): FDT_ERR_BADMAGIC
  34. Scanning disk mmc@48060000.blk...
  35. Scanning disk mmc@481d8000.blk...
  36. Disk mmc@481d8000.blk not ready
  37. Found 2 disks
  38. No EFI system partition
  39. BootOrder not defined
  40. EFI boot manager: Cannot load any image
  41. switch to partitions #0, OK
  42. mmc0 is current device
  43. Checking for: /uEnv.txt ...
  44. Checking for: /boot/uEnv.txt ...
  45. 1725 bytes read in 2 ms (841.8 KiB/s)
  46. Loaded environment from /boot/uEnv.txt
  47. Checking if uname_r is set in /boot/uEnv.txt...
  48. Running uname_boot ...
  49. loading /boot/vmlinuz-5.10.106-ti-r41 ...
  50. 10355200 bytes read in 655 ms (15.1 MiB/s)
  51. debug: [enable_uboot_overlays=1] ...
  52. debug: [enable_uboot_cape_universal=1] ...
  53. debug: [uboot_base_dtb_univ=] ...
  54. loading /boot/dtbs/5.10.106-ti-r41/am335x-pocketbeagle.dtb ...
  55. 171679 bytes read in 15 ms (10.9 MiB/s)
  56. Found 0 extension board(s).
  57. uboot_overlays: [fdt_buffer=0x60000] ...
  58. uboot_overlays: loading /boot/dtbs/5.10.106-ti-r41/overlays/BB-ADC-00A0.dtbo ...
  59. 645 bytes read in 5 ms (126 KiB/s)
  60. loading /boot/initrd.img-5.10.106-ti-r41 ...
  61. 7845807 bytes read in 503 ms (14.9 MiB/s)
  62. debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 overlayroot=tmpfs] ...
  63. debug: [bootz 0x82000000 0x88080000:77b7af 88000000] ...
  64. Kernel image @ 0x82000000 [ 0x000000 - 0x9e0200 ]
  65. ## Flattened Device Tree blob at 88000000
  66.    Booting using the fdt blob at 0x88000000
  67.    Loading Ramdisk to 8f884000, end 8ffff7af ... OK
  68.    Loading Device Tree to 8f7f7000, end 8f883fff ... OK
  69.  
  70. Starting kernel ...
  71.  
  72. [    0.000000] Booting Linux on physical CPU 0x0
  73. [    0.000000] Linux version 5.10.106-ti-r41 (voodoo@rpi4b4g-02) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Thu Mar 31 15:06:08 UTC 2022
  74. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  75. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  76. [    0.000000] OF: fdt: Machine model: TI AM335x PocketBeagle
  77. [    0.000000] Memory policy: Data cache writeback
  78. [    0.000000] efi: UEFI not found.
  79. [    0.000000] cma: Reserved 48 MiB at 0x9c800000
  80. [    0.000000] Zone ranges:
  81. [    0.000000]   Normal   [mem 0x0000000080000000-0x000000009fdfffff]
  82. [    0.000000]   HighMem  empty
  83. [    0.000000] Movable zone start for each node
  84. [    0.000000] Early memory node ranges
  85. [    0.000000]   node   0: [mem 0x0000000080000000-0x000000009fdfffff]
  86. [    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff]
  87. [    0.000000] CPU: All CPU(s) started in SVC mode.
  88. [    0.000000] AM335X ES2.1 (sgx neon)
  89. [    0.000000] percpu: Embedded 21 pages/cpu s54604 r8192 d23220 u86016
  90. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
  91. [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 overlayroot=tmpfs
  92. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  93. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  94. [    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  95. [    0.000000] Memory: 437496K/522240K available (14336K kernel code, 1407K rwdata, 3892K rodata, 1024K init, 309K bss, 35592K reserved, 49152K cma-reserved, 0K highmem)
  96. [    0.000000] random: get_random_u32 called from __kmem_cache_create+0x1c/0x42c with crng_init=0
  97. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  98. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  99. [    0.000000] rcu:     RCU event tracing is enabled.
  100. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  101. [    0.000000]  Trampoline variant of Tasks RCU enabled.
  102. [    0.000000]  Tracing variant of Tasks RCU enabled.
  103. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  104. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  105. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  106. [    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
  107. [    0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000
  108. [    0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  109. [    0.000033] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  110. [    0.000409] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000
  111. [    0.001964] Console: colour dummy device 80x30
  112. [    0.002053] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS (lpj=1990656)
  113. [    0.002083] pid_max: default: 32768 minimum: 301
  114. [    0.002420] LSM: Security Framework initializing
  115. [    0.002520] Yama: becoming mindful.
  116. [    0.002766] AppArmor: AppArmor initialized
  117. [    0.002788] TOMOYO Linux initialized
  118. [    0.002899] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  119. [    0.002917] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  120. [    0.004278] CPU: Testing write buffer coherency: ok
  121. [    0.004368] CPU0: Spectre v2: using BPIALL workaround
  122. [    0.028849] Setting up static identity map for 0x80100000 - 0x80100060
  123. [    0.036487] rcu: Hierarchical SRCU implementation.
  124. [    0.045664] EFI services will not be available.
  125. [    0.056495] smp: Bringing up secondary CPUs ...
  126. [    0.056518] smp: Brought up 1 node, 1 CPU
  127. [    0.056531] SMP: Total of 1 processors activated (995.32 BogoMIPS).
  128. [    0.056542] CPU: All CPU(s) started in SVC mode.
  129. [    0.057403] devtmpfs: initialized
  130. [    0.088842] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  131. [    0.089315] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  132. [    0.089361] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
  133. [    0.093074] pinctrl core: initialized pinctrl subsystem
  134. [    0.094197] DMI not present or invalid.
  135. [    0.094739] NET: Registered protocol family 16
  136. [    0.098709] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  137. [    0.132965] l3-aon-clkctrl:0000:0: failed to disable
  138. [    0.133673] audit: initializing netlink subsys (disabled)
  139. [    0.135002] thermal_sys: Registered thermal governor 'fair_share'
  140. [    0.135017] thermal_sys: Registered thermal governor 'bang_bang'
  141. [    0.135034] thermal_sys: Registered thermal governor 'step_wise'
  142. [    0.135044] thermal_sys: Registered thermal governor 'user_space'
  143. [    0.135054] thermal_sys: Registered thermal governor 'power_allocator'
  144. [    0.135779] cpuidle: using governor ladder
  145. [    0.135842] cpuidle: using governor menu
  146. [    0.140585] audit: type=2000 audit(0.120:1): state=initialized audit_enabled=0 res=1
  147. [    1.036537] random: fast init done
  148. [    4.558457] hw-breakpoint: debug architecture 0x4 unsupported.
  149. [    4.599401] Kprobes globally optimized
  150. [    4.620877] raid6: skip pq benchmark and using algorithm neonx8
  151. [    4.620910] raid6: using neon recovery algorithm
  152. [    4.628691] iommu: Default domain type: Translated
  153. [    4.632271] SCSI subsystem initialized
  154. [    4.633151] usbcore: registered new interface driver usbfs
  155. [    4.633222] usbcore: registered new interface driver hub
  156. [    4.633302] usbcore: registered new device driver usb
  157. [    4.634465] mc: Linux media interface: v0.10
  158. [    4.634519] videodev: Linux video capture interface: v2.00
  159. [    4.634702] pps_core: LinuxPPS API ver. 1 registered
  160. [    4.634716] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  161. [    4.634746] PTP clock support registered
  162. [    4.637044] NetLabel: Initializing
  163. [    4.637070] NetLabel:  domain hash size = 128
  164. [    4.637080] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  165. [    4.637182] NetLabel:  unlabeled traffic allowed by default
  166. [    4.638339] clocksource: Switched to clocksource dmtimer
  167. [    5.686437] VFS: Disk quotas dquot_6.6.0
  168. [    5.686571] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  169. [    5.687655] AppArmor: AppArmor Filesystem Enabled
  170. [    5.700011] NET: Registered protocol family 2
  171. [    5.700251] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  172. [    5.701684] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  173. [    5.701771] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  174. [    5.701841] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  175. [    5.701903] TCP: Hash tables configured (established 4096 bind 4096)
  176. [    5.702062] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  177. [    5.702098] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  178. [    5.702297] NET: Registered protocol family 1
  179. [    5.715631] RPC: Registered named UNIX socket transport module.
  180. [    5.715657] RPC: Registered udp transport module.
  181. [    5.715667] RPC: Registered tcp transport module.
  182. [    5.715676] RPC: Registered tcp NFSv4.1 backchannel transport module.
  183. [    5.715695] NET: Registered protocol family 44
  184. [    5.716589] Trying to unpack rootfs image as initramfs...
  185. [    6.149697] Freeing initrd memory: 7664K
  186. [    6.150874] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  187. [    6.156303] Initialise system trusted keyrings
  188. [    6.156872] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  189. [    6.163691] zbud: loaded
  190. [    6.170791] NFS: Registering the id_resolver key type
  191. [    6.170860] Key type id_resolver registered
  192. [    6.170873] Key type id_legacy registered
  193. [    6.171031] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  194. [    6.171047] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  195. [    6.171095] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  196. [    6.172070] fuse: init (API version 7.32)
  197. [    6.261391] xor: automatically using best checksumming function   neon
  198. [    6.261425] Key type asymmetric registered
  199. [    6.261438] Asymmetric key parser 'x509' registered
  200. [    6.261526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  201. [    6.265894] io scheduler mq-deadline registered
  202. [    6.975196] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz
  203. [    7.165347] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  204. [    7.201062] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz
  205. [    7.449449] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!
  206. [    7.449502] edma 49000000.dma: TI EDMA DMA engine driver
  207. [    7.467876] pinctrl-single 44e10800.pinmux: 142 pins, size 568
  208. [    7.469357] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P1_02'
  209. [    7.469384] gpio-of-helper ocp:cape-universal: Failed to create gpio entry
  210. [    7.487854] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  211. [    7.492295] printk: console [ttyS0] disabled
  212. [    7.492419] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250
  213. [    8.331517] printk: console [ttyS0] enabled
  214. [    8.337622] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 27, base_baud = 3000000) is a 8250
  215. [    8.348131] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 28, base_baud = 3000000) is a 8250
  216. [    8.358782] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 41, base_baud = 3000000) is a 8250
  217. [    8.371972] omap_rng 48310000.rng: Random Number Generator ver. 20
  218. [    8.378612] random: crng init done
  219. [    8.383835] sdhci: Secure Digital Host Controller Interface driver
  220. [    8.390368] sdhci: Copyright(c) Pierre Ossman
  221. [    8.394774] sdhci-pltfm: SDHCI platform and OF driver helper
  222. [    8.509359] usbcore: registered new interface driver smsc95xx
  223. [    8.517891] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator
  224. [    8.531927] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator
  225. [    8.548551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  226. [    8.555424] ehci-platform: EHCI generic platform driver
  227. [    8.561407] ehci-omap: OMAP-EHCI Host Controller driver
  228. [    8.571465] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  229. [    8.576903] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
  230. [    8.584725] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  231. [    8.593070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  232. [    8.600346] usb usb1: Product: MUSB HDRC host driver
  233. [    8.605352] usb usb1: Manufacturer: Linux 5.10.106-ti-r41 musb-hcd
  234. [    8.611577] usb usb1: SerialNumber: musb-hdrc.0
  235. [    8.616995] hub 1-0:1.0: USB hub found
  236. [    8.620984] hub 1-0:1.0: 1 port detected
  237. [    8.633376] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  238. [    8.639341] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
  239. [    8.647104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  240. [    8.655445] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  241. [    8.662720] usb usb2: Product: MUSB HDRC host driver
  242. [    8.667724] usb usb2: Manufacturer: Linux 5.10.106-ti-r41 musb-hcd
  243. [    8.673948] usb usb2: SerialNumber: musb-hdrc.1
  244. [    8.679382] hub 2-0:1.0: USB hub found
  245. [    8.683336] hub 2-0:1.0: 1 port detected
  246. [    8.700953] omap_rtc 44e3e000.rtc: registered as rtc0
  247. [    8.706521] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
  248. [    8.716943] i2c /dev entries driver
  249. [    8.726191] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  250. [    8.733984] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
  251. [    8.742529] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
  252. [    8.752262] cpuidle: enable-method property 'ti,am3352' found operations
  253. [    8.761923] ledtrig-cpu: registered to indicate activity on CPUs
  254. [    8.769155] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  255. [    8.775410] omap-aes 53500000.aes: will run requests pump with realtime priority
  256. [    8.786199] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  257. [    8.792685] omap-sham 53100000.sham: will run requests pump with realtime priority
  258. [    8.804919] hid: raw HID events driver (C) Jiri Kosina
  259. [    8.811429] usbcore: registered new interface driver usbhid
  260. [    8.817352] usbhid: USB HID core driver
  261. [    8.821782] remoteproc remoteproc0: wkup_m3 is available
  262. [    8.834176] drop_monitor: Initializing network drop monitor service
  263. [    8.841531] NET: Registered protocol family 10
  264. [    8.917817] Segment Routing with IPv6
  265. [    8.921958] mip6: Mobile IPv6
  266. [    8.925109] NET: Registered protocol family 17
  267. [    8.934170] Key type dns_resolver registered
  268. [    8.938592] mpls_gso: MPLS GSO support
  269. [    8.942672] ThumbEE CPU extension supported.
  270. [    8.947008] Registering SWP/SWPB emulation handler
  271. [    8.951851] omap_voltage_late_init: Voltage driver support not added
  272. [    8.959242] registered taskstats version 1
  273. [    8.963446] Loading compiled-in X.509 certificates
  274. [    8.968454] zswap: loaded using pool lzo/zbud
  275. [    8.977736] Key type ._fscrypt registered
  276. [    8.981884] Key type .fscrypt registered
  277. [    8.985853] Key type fscrypt-provisioning registered
  278. [    8.998056] Btrfs loaded, crc32c=crc32c-generic
  279. [    9.002852] AppArmor: AppArmor sha1 policy hashing enabled
  280. [    9.029630] OMAP GPIO hardware version 0.1
  281. [    9.059114] tps65217-pmic: Failed to locate of_node [id: -1]
  282. [    9.076029] tps65217-bl: Failed to locate of_node [id: -1]
  283. [    9.083170] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
  284. [    9.090599] input: tps65217_pwr_but as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
  285. [    9.109191] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  286. [    9.115111] at24 0-0050: supply vcc not found, using dummy regulator
  287. [    9.122374] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  288. [    9.129473] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  289. [    9.143071] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 name='P1_02'
  290. [    9.150731] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 name='P1_04'
  291. [    9.158446] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 name='P1_06'
  292. [    9.166023] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 name='P1_08'
  293. [    9.173570] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 name='P1_10'
  294. [    9.181107] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 name='P1_12'
  295. [    9.188657] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 name='P1_20'
  296. [    9.196195] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 name='P1_26'
  297. [    9.203721] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 name='P1_28'
  298. [    9.211446] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 name='P1_29'
  299. [    9.219088] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 name='P1_30'
  300. [    9.226738] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 name='P1_31'
  301. [    9.234543] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 name='P1_32'
  302. [    9.242172] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 name='P1_33'
  303. [    9.249826] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 name='P1_34'
  304. [    9.257481] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 name='P1_35'
  305. [    9.265107] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 name='P1_36'
  306. [    9.272746] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 name='P2_01'
  307. [    9.280365] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 name='P2_02'
  308. [    9.287990] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 name='P2_03'
  309. [    9.295612] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 name='P2_04'
  310. [    9.303253] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 name='P2_05'
  311. [    9.310890] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 name='P2_06'
  312. [    9.318514] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 name='P2_07'
  313. [    9.326141] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 name='P2_08'
  314. [    9.333775] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 name='P2_09'
  315. [    9.341405] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 name='P2_10'
  316. [    9.349033] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 name='P2_11'
  317. [    9.356668] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 name='P2_17'
  318. [    9.364299] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 name='P2_18'
  319. [    9.371947] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 name='P2_19'
  320. [    9.379564] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 name='P2_20'
  321. [    9.387199] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 name='P2_22'
  322. [    9.394824] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 name='P2_24'
  323. [    9.402455] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 name='P2_25'
  324. [    9.410080] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 name='P2_27'
  325. [    9.417702] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 name='P2_28'
  326. [    9.425332] gpio-of-helper ocp:cape-universal: Allocated GPIO id=37 name='P2_29'
  327. [    9.432964] gpio-of-helper ocp:cape-universal: Allocated GPIO id=38 name='P2_30'
  328. [    9.440598] gpio-of-helper ocp:cape-universal: Allocated GPIO id=39 name='P2_31'
  329. [    9.448251] gpio-of-helper ocp:cape-universal: Allocated GPIO id=40 name='P2_32'
  330. [    9.455871] gpio-of-helper ocp:cape-universal: Allocated GPIO id=41 name='P2_33'
  331. [    9.463526] gpio-of-helper ocp:cape-universal: Allocated GPIO id=42 name='P2_34'
  332. [    9.471166] gpio-of-helper ocp:cape-universal: Allocated GPIO id=43 name='P2_35'
  333. [    9.478628] gpio-of-helper ocp:cape-universal: ready
  334. [    9.485616] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
  335. [    9.500784] sdhci-omap 48060000.mmc: Got CD GPIO
  336. [    9.505774] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator
  337. [    9.546137] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA
  338. [    9.556910] Freeing unused kernel memory: 1024K
  339. [    9.564252] Checked W+X mappings: passed, no W+X pages found
  340. [    9.570110] Run /init as init process
  341. [    9.605175] mmc0: new high speed SDHC card at address 5048
  342. [    9.622794] mmcblk0: mmc0:5048 SD16G 14.4 GiB
  343. [    9.634146]  mmcblk0: p1
  344. Loading, please wait...
  345. Starting version 247.3-7
  346. [   15.158515] usb 2-1: new high-speed USB device number 2 using musb-hdrc
  347. [   15.331683] usb 2-1: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 3.18
  348. [   15.346511] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  349. [   15.361204] usb 2-1: Product: SimTech, Incorporated
  350. [   15.370516] usb 2-1: Manufacturer: SimTech, Incorporated
  351. [   15.382810] usb 2-1: SerialNumber: 0123456789ABCDEF
  352. Begin: Loading essential drivers ... done.
  353. Begin: Running /scripts/init-premount ... done.
  354. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  355. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  356. done.
  357. Begin: Will now check root file system ... fsck from util-linux 2.36.1
  358. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  359. rootfs: clean, 28639/889024 files, 358032/3779579 blocks
  360. done.
  361. [   18.355174] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  362. done.
  363. Begin: Running /scripts/local-bottom ... done.
  364. Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=tmpfs opts='' per kernel cmdline
  365. Success: overlayroot: configured root with 'tmpfs' using overlay per kernel cmdline
  366. done.
  367. [   18.881124] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
  368. [   19.380224] systemd[1]: System time before build time, advancing clock.
  369. [   19.553644] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
  370. [   19.577252] systemd[1]: Detected architecture arm.
  371.  
  372. Welcome to Debian GNU/Linux 11 (bullseye)!
  373.  
  374. [   19.604603] systemd[1]: Set hostname to <BeagleBone>.
  375. [   20.315556] systemd-fstab-generator[448]: Checking was requested for "/media/root-ro/", but it is not a device.
  376. [   21.219881] systemd[1]: Queued start job for default target Graphical Interface.
  377. [   21.237653] systemd[1]: Created slice system-getty.slice.
  378. [  OK  ] Created slice system-getty.slice.
  379. [   21.261454] systemd[1]: Created slice system-modprobe.slice.
  380. [  OK  ] Created slice system-modprobe.slice.
  381. [   21.285769] systemd[1]: Created slice system-serial\x2dgetty.slice.
  382. [  OK  ] Created slice system-serial\x2dgetty.slice.
  383. [   21.313014] systemd[1]: Created slice User and Session Slice.
  384. [  OK  ] Created slice User and Session Slice.
  385. [   21.335442] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  386. [  OK  ] Started Dispatch Password …ts to Console Directory Watch.
  387. [   21.359277] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  388. [  OK  ] Started Forward Password R…uests to Wall Directory Watch.
  389. [   21.384292] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  390. [  OK  ] Set up automount Arbitrary…s File System Automount Point.
  391. [   21.411126] systemd[1]: Reached target Local Encrypted Volumes.
  392. [  OK  ] Reached target Local Encrypted Volumes.
  393. [   21.435128] systemd[1]: Reached target Paths.
  394. [  OK  ] Reached target Paths.
  395. [   21.454796] systemd[1]: Reached target Remote File Systems.
  396. [  OK  ] Reached target Remote File Systems.
  397. [   21.478689] systemd[1]: Reached target Slices.
  398. [  OK  ] Reached target Slices.
  399. [   21.498889] systemd[1]: Reached target Swap.
  400. [  OK  ] Reached target Swap.
  401. [   21.529514] systemd[1]: Listening on Syslog Socket.
  402. [  OK  ] Listening on Syslog Socket.
  403. [   21.551517] systemd[1]: Listening on initctl Compatibility Named Pipe.
  404. [  OK  ] Listening on initctl Compatibility Named Pipe.
  405. [   21.576593] systemd[1]: Listening on Journal Audit Socket.
  406. [  OK  ] Listening on Journal Audit Socket.
  407. [   21.599860] systemd[1]: Listening on Journal Socket (/dev/log).
  408. [  OK  ] Listening on Journal Socket (/dev/log).
  409. [   21.624044] systemd[1]: Listening on Journal Socket.
  410. [  OK  ] Listening on Journal Socket.
  411. [   21.648497] systemd[1]: Listening on Network Service Netlink Socket.
  412. [  OK  ] Listening on Network Service Netlink Socket.
  413. [   21.672368] systemd[1]: Listening on udev Control Socket.
  414. [  OK  ] Listening on udev Control Socket.
  415. [   21.695754] systemd[1]: Listening on udev Kernel Socket.
  416. [  OK  ] Listening on udev Kernel Socket.
  417. [   21.720001] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  418. [   21.736330] systemd[1]: Mounting POSIX Message Queue File System...
  419.          Mounting POSIX Message Queue File System...
  420. [   21.776295] systemd[1]: Mounting /sys/kernel/debug...
  421.          Mounting /sys/kernel/debug...
  422. [   21.823213] systemd[1]: Mounting Kernel Trace File System...
  423.          Mounting Kernel Trace File System...
  424. [   21.892111] systemd[1]: Starting Set the console keyboard layout...
  425.          Starting Set the console keyboard layout...
  426. [   21.953197] systemd[1]: Starting Create list of static device nodes for the current kernel...
  427.          Starting Create list of st…odes for the current kernel...
  428. [   21.999816] systemd[1]: Starting Load Kernel Module configfs...
  429.          Starting Load Kernel Module configfs...
  430. [   22.039939] systemd[1]: Starting Load Kernel Module drm...
  431.          Starting Load Kernel Module drm...
  432. [   22.079643] systemd[1]: Starting Load Kernel Module fuse...
  433.          Starting Load Kernel Module fuse...
  434. [   22.115256] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  435. [   22.140496] systemd[1]: Starting Journal Service...
  436.          Starting Journal Service...
  437. [   22.188868] systemd[1]: Starting Load Kernel Modules...
  438.          Starting Load Kernel Modules...
  439. [   22.244241] systemd[1]: Starting Remount Root and Kernel File Systems...
  440.          Starting Remount Root and Kernel File Systems...
  441. [   22.312195] systemd[1]: Starting Coldplug All udev Devices...
  442.          Starting Coldplug All udev Devices...
  443. [   22.429590] systemd[1]: Mounted POSIX Message Queue File System.
  444. [  OK  ] Mounted POSIX Message Queue File System.
  445. [   22.480662] systemd[1]: Mounted /sys/kernel/debug.
  446. [  OK  ] Mounted /sys/kernel/debug.
  447. [   22.528431] systemd[1]: Mounted Kernel Trace File System.
  448. [  OK  ] Mounted Kernel Trace File System.
  449. [   22.570946] systemd[1]: Finished Set the console keyboard layout.
  450. [  OK  ] Finished Set the console keyboard layout.
  451. [   22.624081] systemd[1]: Finished Create list of static device nodes for the current kernel.
  452. [  OK  ] Finished Create list of st… nodes for the current kernel.
  453. [   22.696139] systemd[1]: modprobe@configfs.service: Succeeded.
  454. [   22.727250] systemd[1]: Finished Load Kernel Module configfs.
  455. [  OK  ] Finished Load Kernel Module configfs.
  456. [   22.765972] systemd[1]: modprobe@drm.service: Succeeded.
  457. [   22.795326] systemd[1]: Finished Load Kernel Module drm.
  458. [  OK  ] Finished Load Kernel Module drm.
  459. [   22.829967] systemd[1]: modprobe@fuse.service: Succeeded.
  460. [   22.862938] systemd[1]: Finished Load Kernel Module fuse.
  461. [  OK  ] Finished Load Kernel Module fuse.
  462. [   22.903623] systemd[1]: Finished Load Kernel Modules.
  463. [  OK  ] Finished Load Kernel Modules.
  464. [   22.951280] systemd[1]: Finished Remount Root and Kernel File Systems.
  465. [  OK  ] Finished Remount Root and Kernel File Systems.
  466. [   23.009296] systemd[1]: Mounting FUSE Control File System...
  467.          Mounting FUSE Control File System...
  468. [   23.115263] systemd[1]: Mounting Kernel Configuration File System...
  469.          Mounting Kernel Configuration File System...
  470. [   23.189202] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  471. [   23.227384] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  472. [   23.264610] systemd[1]: Starting Load/Save Random Seed...
  473.          Starting Load/Save Random Seed...
  474. [   23.312096] systemd[1]: Starting Apply Kernel Variables...
  475.          Starting Apply Kernel Variables...
  476. [   23.384024] systemd[1]: Starting Create System Users...
  477.          Starting Create System Users...
  478. [   23.489938] systemd[1]: Mounted FUSE Control File System.
  479. [  OK  ] Mounted FUSE Control File System.
  480. [   23.564476] systemd[1]: Mounted Kernel Configuration File System.
  481. [  OK  ] Mounted Kernel Configuration File System.
  482. [   23.631482] systemd[1]: Finished Load/Save Random Seed.
  483. [  OK  ] Finished Load/Save Random Seed.
  484. [   23.680210] systemd[1]: Started Journal Service.
  485. [  OK  ] Started Journal Service.
  486. [  OK  ] Finished Apply Kernel Variables.
  487.          Starting Flush Journal to Persistent Storage...
  488. [  OK  ] Finished Create System Users.
  489.          Starting Create Static Device Nodes in /dev...
  490. [   24.015858] systemd-journald[467]: Received client request to flush runtime journal.
  491. [  OK  ] Finished Create Static Device Nodes in /dev.
  492. [  OK  ] Reached target Local File Systems (Pre).
  493. [  OK  ] Reached target Local File Systems.
  494. [   24.391258] systemd-journald[467]: File /var/log/journal/cc6edbf4d2064e2a8a825c827a2fcbfe/system.journal corrupted or uncleanly shut down, renaming and replacing.
  495.          Starting Set console font and keymap...
  496.          Starting Rule-based Manage…for Device Events and Files...
  497. [  OK  ] Finished Set console font and keymap.
  498. [  OK  ] Started Rule-based Manager for Device Events and Files.
  499.          Starting Network Service...
  500. [  OK  ] Finished Coldplug All udev Devices.
  501.          Starting Helper to synchronize boot up for ifupdown...
  502. [  OK  ] Finished Helper to synchronize boot up for ifupdown.
  503.          Starting Raise network interfaces...
  504. [  OK  ] Started Network Service.
  505. [  OK  ] Finished Raise network interfaces.
  506. [  OK  ] Found device /dev/ttyS0.
  507. [  OK  ] Finished Flush Journal to Persistent Storage.
  508.          Starting Create Volatile Files and Directories...
  509. [  OK  ] Finished Create Volatile Files and Directories.
  510.          Starting Network Name Resolution...
  511.          Starting Network Time Synchronization...
  512.          Starting Update UTMP about System Boot/Shutdown...
  513. [  OK  ] Finished Update UTMP about System Boot/Shutdown.
  514. [   32.796851] remoteproc remoteproc0: powering up wkup_m3
  515. [   32.814495] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
  516. [   32.854838] remoteproc remoteproc0: remote processor wkup_m3 is now up
  517. [   32.854862] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
  518. [  OK  ] Started Network Time Synchronization.
  519. [  OK  ] Reached target System Initialization.
  520. [  OK  ] Started Daily Cleanup of Temporary Directories.
  521. [  OK  ] Reached target System Time Set.
  522. [  OK  ] Reached target System Time Synchronized.
  523. [  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
  524. [  OK  ] Started Discard unused blocks once a week.
  525. [  OK  ] Started Daily rotation of log files.
  526. [  OK  ] Reached target Timers.
  527. [  OK  ] Listening on D-Bus System Message Bus Socket.
  528. [  OK  ] Reached target Sockets.
  529. [  OK  ] Reached target Basic System.
  530.          Starting BeagleBoard.org USB gadgets...
  531. [  OK  ] Started Regular background program processing daemon.
  532. [  OK  ] Started D-Bus System Message Bus.
  533.          Starting Remove Stale Onli…t4 Metadata Check Snapshots...
  534.          Starting System Logging Service...
  535.          Starting User Login Management...
  536.          Starting WPA supplicant...
  537. [  OK  ] Started System Logging Service.
  538. [  OK  ] Started Network Name Resolution.
  539. [  OK  ] Reached target Host and Network Name Lookups.
  540. [  OK  ] Started WPA supplicant.
  541. [  OK  ] Reached target Network.
  542. [   35.392798] using random self ethernet address
  543.          Starting Beagle Flasher Shutdown...
  544. [   35.436916] using random host ethernet address
  545.          Starting OpenBSD Secure Shell server...
  546.          Starting Permit User Sessions...
  547. [  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
  548. [  OK  ] Finished Beagle Flasher Shutdown.
  549. [   36.002604] using random self ethernet address
  550. [   36.026526] using random host ethernet address
  551. [  OK  ] Finished Permit User Sessions.
  552. [  OK  ] Started Getty on tty1.
  553. [  OK  ] Started Serial Getty on ttyS0.
  554. [   36.268610] Mass Storage Function, version: 2009/09/11
  555. [   36.299763] LUN: removable file: (no medium)
  556. [  OK  ] Started User Login Management.
  557. [   36.443077] usb0: HOST MAC 60:64:05:e1:15:25
  558. [   36.466684] usb0: MAC 60:64:05:e1:15:26
  559. [   36.490590] usb1: HOST MAC 60:64:05:e1:15:27
  560. [   36.506751] usb1: MAC 60:64:05:e1:15:28
  561. [  OK  ] Started BeagleBoard.org USB gadgets.
  562. [  OK  ] Started OpenBSD Secure Shell server.
  563. [  OK  ] Reached target Hardware activated USB gadget.
  564. [   38.495915] usbcore: registered new interface driver usbserial_generic
  565. [   38.550643] usbserial: USB Serial support registered for generic
  566. [   38.915621] usbcore: registered new interface driver option
  567. [   38.960272] usbserial: USB Serial support registered for GSM modem (1-port)
  568. [   39.015326] option 2-1:1.2: GSM modem (1-port) converter detected
  569. [   39.074781] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
  570. [   39.129500] option 2-1:1.3: GSM modem (1-port) converter detected
  571. [   39.194631] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
  572. [   39.251363] option 2-1:1.4: GSM modem (1-port) converter detected
  573. [   39.318832] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
  574. [   39.389854] option 2-1:1.5: GSM modem (1-port) converter detected
  575. [   39.454827] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
  576. [   39.519215] option 2-1:1.6: GSM modem (1-port) converter detected
  577. [   39.598574] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4
  578. [   40.244830] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  579. [   40.356954] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  580. [   40.571953] usbcore: registered new interface driver cdc_ether
  581. [   40.782962] rndis_host 2-1:1.0 usb2: register 'rndis_host' at usb-musb-hdrc.1-1, RNDIS device, be:a6:10:d3:8b:7a
  582. [   40.982646] usbcore: registered new interface driver rndis_host
  583. [   41.027705] CAN device driver interface
  584. [   41.352888] usbcore: registered new interface driver rndis_wlan
  585. [   41.363057] c_can_platform 481cc000.can: c_can_platform device registered (regs=db6c2b08, irq=44)
  586. [   41.487047] c_can_platform 481d0000.can: c_can_platform device registered (regs=2685bc19, irq=45)
  587.  
  588. Debian GNU/Linux 11 BeagleBone ttyS0
  589.  
  590. BeagleBoard.org Debian Bullseye Minimal Image 2022-04-01
  591. Support: https://bbb.io/debian
  592. default username:password is [debian:temppwd]
  593.  
  594. BeagleBone login: r[   45.044113] PM: bootloader does not support rtc-only!
  595. oot
  596. Password:
  597. [   48.650630] remoteproc remoteproc1: 4a334000.pru is available
  598. [   48.718634] remoteproc remoteproc2: 4a338000.pru is available
  599. tmpfs-root /media/root-rw tmpfs rw,relatime 0 0
  600. overlayroot / overlay rw,relatime,lowerdir=/media/root-ro,upperdir=/media/root-rw/overlay,workdir=/media/root-rw/overlay-workdir/_ 0 0
  601. /dev/mmcblk0p1 /media/root-ro ext4 ro,relatime 0 0
  602.  
  603.  
  604. The programs included with the Debian GNU/Linux system are free software;
  605. the exact distribution terms for each program are described in the
  606. individual files in /usr/share/doc/*/copyright.
  607.  
  608. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  609. permitted by applicable law.
  610. Last login: Thu Apr 21 09:24:48 UTC 2022 on ttyS0
  611. root@BeagleBone:~# cat "/boot/uEnv.txt"
  612. #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
  613.  
  614. uname_r=5.10.106-ti-r41
  615. #uuid=
  616. #dtb=
  617.  
  618. ###U-Boot Overlays###
  619. ###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
  620. ###Master Enable
  621. enable_uboot_overlays=1
  622. ###
  623. ###Overide capes with eeprom
  624. #uboot_overlay_addr0=<file0>.dtbo
  625. #uboot_overlay_addr1=<file1>.dtbo
  626. #uboot_overlay_addr2=<file2>.dtbo
  627. #uboot_overlay_addr3=<file3>.dtbo
  628. ###
  629. ###Additional custom capes
  630. #uboot_overlay_addr4=<file4>.dtbo
  631. #uboot_overlay_addr5=<file5>.dtbo
  632. #uboot_overlay_addr6=<file6>.dtbo
  633. #uboot_overlay_addr7=<file7>.dtbo
  634. ###
  635. ###Custom Cape
  636. #dtb_overlay=<file8>.dtbo
  637. ###
  638. ###Disable auto loading of virtual capes (emmc/video/wireless/adc)
  639. #disable_uboot_overlay_emmc=1
  640. #disable_uboot_overlay_video=1
  641. #disable_uboot_overlay_audio=1
  642. #disable_uboot_overlay_wireless=1
  643. #disable_uboot_overlay_adc=1
  644. ###
  645. ###Cape Universal Enable
  646. enable_uboot_cape_universal=1
  647. ###
  648. ###Debug: disable uboot autoload of Cape
  649. #disable_uboot_overlay_addr0=1
  650. #disable_uboot_overlay_addr1=1
  651. #disable_uboot_overlay_addr2=1
  652. #disable_uboot_overlay_addr3=1
  653. ###
  654. ###U-Boot fdt tweaks... (60000 = 384KB)
  655. #uboot_fdt_buffer=0x60000
  656. ###U-Boot Overlays###
  657.  
  658. console=ttyS0,115200n8
  659. cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 overlayroot=tmpfs
  660.  
  661. #In the event of edid real failures, uncomment this next line:
  662. #cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e
  663.  
  664. #Use an overlayfs on top of a read-only root filesystem:
  665. #cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet overlayroot=tmpfs
  666.  
  667. ##enable Generic eMMC Flasher:
  668. #cmdline=init=/usr/sbin/init-beagle-flasher
  669.  
  670. root@BeagleBone:~# shutdown now
  671. root@BeagleBone:~#         Stopping Session 2 of user root.
  672. [  OK  ] Removed slice system-modprobe.slice.
  673. [  OK  ] Stopped target Graphical Interface.
  674. [  OK  ] Stopped target Multi-User System.
  675. [  OK  ] Stopped target Login Prompts.
  676. [  OK  ] Stopped target Host and Network Name Lookups.
  677. [  OK  ] Stopped target Timers.
  678. [  OK  ] Stopped Periodic ext4 Onli…ata Check for All Filesystems.
  679. [  OK  ] Stopped Discard unused blocks once a week.
  680. [  OK  ] Stopped Daily rotation of log files.
  681. [  OK  ] Stopped Daily Cleanup of Temporary Directories.
  682. [  OK  ] Stopped target System Time Synchronized.
  683. [  OK  ] Stopped target System Time Set.
  684. [  OK  ] Stopped target Hardware activated USB gadget.
  685. [  OK  ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
  686.          Stopping Regular background program processing daemon...
  687.          Stopping Getty on tty1...
  688.          Stopping System Logging Service...
  689.          Stopping Serial Getty on ttyGS0...
  690.          Stopping Serial Getty on ttyS0...
  691.          Stopping OpenBSD Secure Shell server...
  692.          Stopping Hostname Service...
  693.          Stopping Load/Save Random Seed...
  694. [  OK  ] Stopped Regular background program processing daemon.
  695. [  OK  ] Stopped System Logging Service.
  696. [  OK  ] Stopped Getty on tty1.
  697. [  OK  ] Stopped Serial Getty on ttyS0.
  698. [  OK  ] Stopped Serial Getty on ttyGS0.
  699. [  OK  ] Stopped Hostname Service.
  700. [  OK  ] Stopped OpenBSD Secure Shell server.
  701. [  OK  ] Stopped Load/Save Random Seed.
  702. [  OK  ] Stopped Session 2 of user root.
  703. [  OK  ] Removed slice system-getty.slice.
  704. [  OK  ] Removed slice system-serial\x2dgetty.slice.
  705.          Stopping User Login Management...
  706.          Stopping User Manager for UID 0...
  707. [  OK  ] Stopped User Login Management.
  708. [  OK  ] Stopped User Manager for UID 0.
  709.          Stopping User Runtime Directory /run/user/0...
  710. [  OK  ] Unmounted /run/user/0.
  711. [  OK  ] Stopped User Runtime Directory /run/user/0.
  712. [  OK  ] Removed slice User Slice of UID 0.
  713.          Stopping Permit User Sessions...
  714. [  OK  ] Stopped Permit User Sessions.
  715. [  OK  ] Stopped target Network.
  716. [  OK  ] Stopped target Remote File Systems.
  717.          Stopping Raise network interfaces...
  718.          Stopping Network Name Resolution...
  719.          Stopping WPA supplicant...
  720. [  OK  ] Stopped WPA supplicant.
  721. [  OK  ] Stopped Network Name Resolution.
  722.          Stopping D-Bus System Message Bus...
  723.          Stopping Network Service...
  724. [  OK  ] Stopped Raise network interfaces.
  725. [  OK  ] Stopped Network Service.
  726. [  OK  ] Stopped D-Bus System Message Bus.
  727. [  OK  ] Stopped target Basic System.
  728. [  OK  ] Stopped target Paths.
  729. [  OK  ] Stopped target Slices.
  730. [  OK  ] Removed slice User and Session Slice.
  731. [  OK  ] Stopped target Sockets.
  732. [  OK  ] Closed D-Bus System Message Bus Socket.
  733. [  OK  ] Stopped target System Initialization.
  734. [  OK  ] Stopped target Local Encrypted Volumes.
  735. [  OK  ] Stopped Dispatch Password …ts to Console Directory Watch.
  736. [  OK  ] Stopped Forward Password R…uests to Wall Directory Watch.
  737. [  OK  ] Closed Syslog Socket.
  738. [  OK  ] Stopped Apply Kernel Variables.
  739. [  OK  ] Stopped Load Kernel Modules.
  740.          Stopping Network Time Synchronization...
  741.          Stopping Update UTMP about System Boot/Shutdown...
  742. [  OK  ] Stopped Network Time Synchronization.
  743. [  OK  ] Stopped Update UTMP about System Boot/Shutdown.
  744. [  OK  ] Stopped Create Volatile Files and Directories.
  745. [  OK  ] Stopped target Local File Systems.
  746.          Unmounting /media/root-ro...
  747.          Unmounting /media/root-rw...
  748. [  OK  ] Unmounted /media/root-ro.
  749. [  OK  ] Unmounted /media/root-rw.
  750. [  OK  ] Stopped target Local File Systems (Pre).
  751. [  OK  ] Stopped target Swap.
  752. [  OK  ] Reached target Unmount All Filesystems.
  753. [  OK  ] Stopped Create Static Device Nodes in /dev.
  754. [  OK  ] Stopped Create System Users.
  755. [  OK  ] Stopped Remount Root and Kernel File Systems.
  756. [  OK  ] Reached target Shutdown.
  757. [  OK  ] Reached target Final Step.
  758. [  OK  ] Finished Power-Off.
  759. [  OK  ] Reached target Power-Off.
  760. [   70.671366] systemd-shutdown[1]: Syncing filesystems and block devices.
  761. [   70.681616] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
  762. [   70.712423] systemd-journald[467]: Received SIGTERM from PID 1 (systemd-shutdow).
  763. [   70.771099] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
  764. [   70.817582] systemd-shutdown[1]: Unmounting file systems.
  765. [   70.843418] [919]: Remounting '/' read-only in with options 'lowerdir=/media/root-ro,upperdir=/media/root-rw/overlay,workdir=/media/root-rw/overlay-workdir/_'.
  766. [   70.907851] systemd-shutdown[1]: All filesystems unmounted.
  767. [   70.918415] systemd-shutdown[1]: Deactivating swaps.
  768. [   70.926804] systemd-shutdown[1]: All swaps deactivated.
  769. [   70.938393] systemd-shutdown[1]: Detaching loop devices.
  770. [   70.951302] systemd-shutdown[1]: All loop devices detached.
  771. [   70.962410] systemd-shutdown[1]: Stopping MD devices.
  772. [   70.975059] systemd-shutdown[1]: All MD devices stopped.
  773. [   70.986400] systemd-shutdown[1]: Detaching DM devices.
  774. [   70.998983] systemd-shutdown[1]: All DM devices detached.
  775. [   71.010401] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
  776. [   71.036140] systemd-shutdown[1]: Syncing filesystems and block devices.
  777. [   71.047495] systemd-shutdown[1]: Powering off.
  778. [   71.068053] reboot: Power down
  779.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!