SHARE
TWEET

Printer

a guest Jul 18th, 2019 71 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # generated by PrusaSlicer 2.0.0+linux64 on 2019-06-10 at 17:13:12
  2. bed_shape = 0x0,214x0,214x210,0x210
  3. before_layer_gcode =
  4. between_objects_gcode =
  5. cooling_tube_length = 5
  6. cooling_tube_retraction = 91.5
  7. default_filament_profile = ""
  8. default_print_profile =
  9. deretract_speed = 0
  10. end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heated bed\nG28 X0  ; home X axis\nM84     ; disable motors\n
  11. extra_loading_move = -2
  12. extruder_colour = ""
  13. extruder_offset = 0x0
  14. gcode_flavor = marlin
  15. high_current_on_filament_swap = 0
  16. host_type = octoprint
  17. inherits =
  18. layer_gcode =
  19. machine_max_acceleration_e = 10000,5000
  20. machine_max_acceleration_extruding = 1500,1250
  21. machine_max_acceleration_retracting = 1500,1250
  22. machine_max_acceleration_x = 9000,1000
  23. machine_max_acceleration_y = 9000,1000
  24. machine_max_acceleration_z = 500,200
  25. machine_max_feedrate_e = 120,120
  26. machine_max_feedrate_x = 500,200
  27. machine_max_feedrate_y = 500,200
  28. machine_max_feedrate_z = 12,12
  29. machine_max_jerk_e = 2.5,2.5
  30. machine_max_jerk_x = 10,10
  31. machine_max_jerk_y = 10,10
  32. machine_max_jerk_z = 0.2,0.4
  33. machine_min_extruding_rate = 0,0
  34. machine_min_travel_rate = 0,0
  35. max_layer_height = 0.3
  36. max_print_height = 205
  37. min_layer_height = 0.07
  38. nozzle_diameter = 0.4
  39. parking_pos_retraction = 92
  40. print_host = 192.168.0.173
  41. printer_model =
  42. printer_notes =
  43. printer_settings_id =
  44. printer_technology = FFF
  45. printer_variant =
  46. printer_vendor =
  47. printhost_apikey = 8833AD106CB143AB9A7D587D9886AD4C
  48. printhost_cafile =
  49. remaining_times = 1
  50. retract_before_travel = 2
  51. retract_before_wipe = 0%
  52. retract_layer_change = 1
  53. retract_length = 3
  54. retract_length_toolchange = 10
  55. retract_lift = 0
  56. retract_lift_above = 0
  57. retract_lift_below = 0
  58. retract_restart_extra = 0
  59. retract_restart_extra_toolchange = 0
  60. retract_speed = 60
  61. serial_port =
  62. serial_speed = 250000
  63. silent_mode = 1
  64. single_extruder_multi_material = 0
  65. start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
  66. toolchange_gcode =
  67. use_firmware_retraction = 0
  68. use_relative_e_distances = 0
  69. use_volumetric_e = 0
  70. variable_layer_height = 1
  71. wipe = 1
  72. z_offset = 0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top