KMSG from BOOTLOOP (SAMSUNG NOTE 3 LINEAGE 15.0 by J0SH1X)

[    0.000000] sec_dbg_setup: str=@0x10100008
[    0.000000] sec_dbg_setup: secdbg_paddr = 0x10100008
[    0.000000] sec_dbg_setup: secdbg_size = 0x80000
[    0.000000] synaptics_read_lcd_id: string is 424024, integer is 424024, ID2[0x04], system_rev is 8
[    0.004379] set_dload_mode <1> ( c110fc00 )
[    0.037601] sec_debug_init: enable=0
[    0.037612] sec_debug_init:__raw_readl restart_reason=305419896
[    0.037622] sec_debug_init: restart_reason : 0xfa00a65c
[    0.038408] msm_8974_init_gpiomux:2701 socinfo_get_version 20002
[    0.038425] msm_gpiomux_install: write failure: status[-22] gpio[-1]
[    0.038436] msm_gpiomux_install: write failure: status[-22] gpio[-1]
[    0.582408] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[    0.598043] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.630041] ION-heap mm: Cannot specify alignment for this type of heap
[    0.630406] ION-heap adsp: Cannot specify alignment for this type of heap
[    0.637800] Trying to set irq flags for IRQ353
[    0.638014] Trying to set irq flags for IRQ354
[    0.638129] Trying to set irq flags for IRQ355
[    0.638246] Trying to set irq flags for IRQ356
[    0.638457] Trying to set irq flags for IRQ357
[    0.638573] Trying to set irq flags for IRQ358
[    0.638785] Trying to set irq flags for IRQ359
[    0.638901] Trying to set irq flags for IRQ360
[    0.639017] Trying to set irq flags for IRQ361
[    0.639229] Trying to set irq flags for IRQ362
[    0.639345] Trying to set irq flags for IRQ363
[    0.639556] Trying to set irq flags for IRQ364
[    0.639671] Trying to set irq flags for IRQ365
[    0.639786] Trying to set irq flags for IRQ366
[    0.639996] Trying to set irq flags for IRQ367
[    0.640112] Trying to set irq flags for IRQ368
[    0.640229] Trying to set irq flags for IRQ369
[    0.640345] Trying to set irq flags for IRQ370
[    0.640462] Trying to set irq flags for IRQ371
[    0.640675] Trying to set irq flags for IRQ372
[    0.640790] Trying to set irq flags for IRQ373
[    0.640935] Trying to set irq flags for IRQ374
[    0.641147] Trying to set irq flags for IRQ375
[    0.641262] Trying to set irq flags for IRQ376
[    0.641471] Trying to set irq flags for IRQ377
[    0.641586] Trying to set irq flags for IRQ378
[    0.641700] Trying to set irq flags for IRQ379
[    0.641909] Trying to set irq flags for IRQ380
[    0.642024] Trying to set irq flags for IRQ381
[    0.642235] Trying to set irq flags for IRQ382
[    0.642349] Trying to set irq flags for IRQ383
[    0.645727] Error-Bad Function Input
[    0.647053] Error-Bad Function Input
[    0.833407] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[    0.912376] FIPS : Tcrypt Tests Start
[    0.919813] FIPS : Tcrypt Tests End
[    1.037213] tcrypt: CRYPTO API started in FIPS mode!!!
[    1.042354] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
[    1.042467] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
[    1.042540] mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1691:cmdline panel not set disp_idx=[00000000]
[    1.044510] mdss_samsung_parse_panel_cmd:3334, Unable to read samsung,panel-mtp-read-cmds
[    1.044655] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-display-unblank-cmds
[    1.044817] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-display-blank-cmds
[    1.044995] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-touchsensing-on-cmds
[    1.045157] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-touchsensing-off-cmds
[    1.045472] [mdnie lite] start!
[    1.045577] [mdnie lite] end!
[    1.045870] dsi_panel_device_register:2086, Disp_en_gpio (421)
[    1.045989] dsi_panel_device_register:2376, Disp_te_gpio (12)
[    1.046169] dsi_panel_device_register:2425, Disp_rst_gpio (426)
[    1.071827] mdss_dsi_pref_prim_panel:can't find panel phandle
[    1.071935] mdss_dsi_ctrl_probe: can't find panel node
[    1.074358] samsung_dsi_panel_event_handler : unknown event
[    1.075011] sii8240,vcc_1p2v is not exist in device tree
[    1.075080] sii8240,vcc_1p8v is not exist in device tree
[    1.075147] sii8240,vcc_3p3v is not exist in device tree
[    1.090363] sps: BAM device 0xf9944000 is not registered yet.
[    1.102040] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
[    1.105442] barcode_emul_ice4_hlte: probe complete barcode_emul_probe
[    1.117246] sps: BAM device 0xf9904000 is not registered yet.
[    1.385734] get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
[    1.388730] conn_gadget_function_init(#) call conn_gadget_setup
[    1.389639] cypress_touchkey_init
[    1.389887] cypress_parse_dt: SCL:96, SDA:95, INT:436, ID:101, VDD_GPIO:-22 ,VCC_EN:-22, FW_UPDATE:0
[    1.681327] cypress_touchkey_init: init done 0
[    1.681567] wacom_get_dt_coords: x_invert = 1, y_invert = 0, xy_switch = 1
[    1.681706] wacom_parse_dt: fwe1: 80, reset_n: 79, pdct: 145, insert: 427, model: SM-N9005, mpu: 2c, irq_flags=2
[    1.681886] wacom_i2c_probe: wacom : gpio_to_irq : 327
[    1.883326] wacom_i2c_probe: wacon ic turn on
[    1.987609] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_probe start.
[    1.987778] synaptics_parse_dt: power= 416, tsp_int= 437, X= 1079, Y= 1919, project= H, config[0][0][0][0], tablet = 0 reset= -22 surface-only= 0
[    2.146821] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: f51 query feature feature1:51, feature2:3
[    2.150788] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
[    2.163063] synaptics_rmi4_i2c 2-0020: rmidb_scan_pdt: Failed to find FDB
[    2.164187] qcom,qpnp-rtc qpnp-rtc-17: Probe success !!
[    2.166467] cam_dummy_init_module:182
[    2.166593] cam_dummy_platform_probe:87
[    2.172400] msm_camera_request_gpio_table:555 invalid gpio_tbl   (null) / size 0
[    2.178802] msm_camera_request_gpio_table:555 invalid gpio_tbl   (null) / size 0
[    2.181699] __msm_jpeg_init:895] Jpeg Device id 0
[    2.181903] __msm_jpeg_init:895] Jpeg Device id 1
[    2.182101] __msm_jpeg_init:895] Jpeg Device id 2
[    2.196675] QCTKD: camss_top_ahb_clk[1:1] Enable
[    2.196744] QCTKD: vfe_clk_src[1:1] Enable
[    2.196810] QCTKD: camss_vfe_vfe_clk[1:1] Enable
[    2.196924] QCTKD: iface_clk[1:1] Enable
[    2.196994] QCTKD: cpp_core_clk[1:1] Enable
[    2.197106] QCTKD: cpp_iface_clk[1:1] Enable
[    2.197171] QCTKD: cpp_bus_clk[1:1] Enable
[    2.197235] QCTKD: micro_iface_clk[1:1] Enable
[    2.197373] MSM-CPP cpp_init_hardware:803 stream_cnt:0
[    2.197432] MSM-CPP cpp_init_hardware:826 cpp_dbg: end of cpp_init_hardware
[    2.197698] QCTKD: micro_iface_clk[0:0] Disable
[    2.197758] QCTKD: cpp_bus_clk[0:0] Disable
[    2.197866] QCTKD: cpp_iface_clk[0:0] Disable
[    2.197927] QCTKD: cpp_core_clk[0:0] Disable
[    2.197986] QCTKD: iface_clk[0:0] Disable
[    2.198094] QCTKD: camss_vfe_vfe_clk[0:0] Disable
[    2.198152] QCTKD: vfe_clk_src[0:0] Disable
[    2.198211] QCTKD: camss_top_ahb_clk[0:0] Disable
[    2.250076] bluesleep probe
[    2.250077]  [BT]
[    2.250192] configure input direction
[    2.250193]  [BT]
[    2.264963] sdhci_msm_populate_pdata: before parsing vendor_type
[    2.267471] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
[    2.267779] sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
[    2.268026] mmc1: id 1
[    2.271802] sdhci_msm_populate_pdata: before parsing vendor_type
[    2.275816] mmc2: id 3
[    2.293467] QCE50: __qce_init_clk: Unable to get CE core clk
[    2.293576] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
[    2.293994] QCE50: __qce_init_clk: Unable to get CE core clk
[    2.294104] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
[    2.296380] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    2.296449] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
[    2.301234] sec_hal_fg_get_property: Fail to get psy (battery)
[    2.301343] max17048_get_current: Fail to get psy (sec-charger)
[    2.301452] max17048_get_current_average: Fail to get psy (sec-charger)
[    2.301510] max17048_get_current_average: Fail to get psy (battery)
[    2.303751] sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 99)
[    2.303816] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
[    2.304690] sec_hal_fg_get_property: Fail to get psy (battery)
[    2.304799] max17048_get_current: Fail to get psy (sec-charger)
[    2.304859] max17048_get_current_average: Fail to get psy (sec-charger)
[    2.304966] max17048_get_current_average: Fail to get psy (battery)
[    2.307194] sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 99)
[    2.307308] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
[    2.309363] max77803-charger max77803-charger: max77803_charger_probe : Failed to get charger int
[    2.313336] max77803_get_health_state: Fail to get psy (battery)
[    2.313747] max77803_get_vbus_state: Fail to get psy (battery)
[    2.316404] max77803_get_health_state: Fail to get psy (battery)
[    2.316845] max77803_get_vbus_state: Fail to get psy (battery)
[    2.357074] **** secdbg_log or secdbg_paddr is not initialized ****
[    2.359240] reg-fixed-voltage regulator-tpd4s214.99: Could not obtain regulator enable GPIO 425: -16
[    2.363714] gpio-keys gpio_keys.97: [Keys] no regulator: ignoring
[    2.364636] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
[    2.364745] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
[    2.364868] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
[    2.366285]
[    2.366287] w1_gpio_msm_probe start
[    2.366625] w1_uevent master_dev name = w1_bus_master1
[    2.374592] sec_hal_fg_get_property: Fail to get psy (battery)
[    2.375436] max17048_get_current_average: Fail to get psy (battery)
[    2.403799] max17048_rcomp_update: Fail to get psy (battery)
[    2.406507] cable_initial_check: ta_int_gpio is 0 or not assigned yet(cable_type(1))
[    2.410507] mmc1: sdhci_msm_execute_tuning: data error (-84)
[    2.413831] mmc1: sdhci_msm_execute_tuning: data error (-84)
[    2.435094] hostwake line change [BT]
[    2.435180] bluesleep_sleep_work - uport is null [BT]
[    3.178925] selinux: SELinux:  Could not stat /dev/block: No such file or directory.
[    3.178929]
[    3.179221] init: waitpid failed: No child processes
[    3.183799] init: decode_uid: Unable to find UID for 'qcom_diag'; returning UINT_MAX
[    3.187374] init: init.target.rc: 49: invalid keyword 'check_fs'
[    3.187487] init:
[    3.187595] init: init.target.rc: 53: invalid keyword 'check_fs'
[    3.187707] init:
[    3.189387] init: could not import file '/vendor/etc/init/hw/init.qcom.rc' from '/init.rc': No such file or directory
[    3.191275] init: failed to open /acct/uid_0/pid_256/cgroup.procs: No such file or directory
[    3.191382] init: createProcessGroup(0, 256) failed for service 'ueventd': No such file or directory
[    3.194627] ueventd: invalid gid 'qcom_diag'
[    3.195199] ueventd: invalid gid 'net_bt_stack'
[    3.195273] ueventd: invalid gid 'net_bt_stack'
[    3.362940] w1_uevent master_dev name = w1_bus_master1
[    3.399244] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
[    4.122793] sec_bat_cable_work: Fail to sec-charger set (9=>-22)
[    4.140671] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[    4.144239] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[    4.144442] init: write_file: Unable to open '/sys/class/leds/vibrator/trigger': No such file or directory
[    4.146234] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
[    4.150255] init: [libfs_mgr]Not running /system/bin/tune2fs on /dev/block/platform/msm_sdcc.1/by-name/system (executable not in system image)
[    4.232152] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
[    4.232921] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
[    4.233630] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
[    4.234274] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
[    4.258744] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
[    4.259517] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
[    4.260237] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
[    4.260885] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
[    4.410261] init: [libfs_mgr]mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/userdata on /data with fs_type=ext4 instead of f2fs
[    4.445740] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
[    4.446827] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
[    4.447590] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
[    4.448293] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
[    4.484256] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
[    4.485579] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
[    4.486333] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
[    4.486816] F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
[    4.563268] init: [libfs_mgr]mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/cache on /cache with fs_type=ext4 instead of f2fs
[    4.642041] init: ignored duplicate definition of service 'hostapd'
[    5.741501] sec_bat_swelling_check: Fail to sec-charger get (9=>-22)
[    6.383638] dwc3 f9200000.dwc3: dwc3_otg_init_sm: completion timeout
[   22.005821] [SSP]: get_sensor_scanning_info - 0 3 254 255
[   22.019912] [SSP]: set_proximity_threshold - SENSOR_PROXTHRESHOL
[   22.051041] [SSP]: set_proximity_threshold - SENSOR_PROXTHRESHOL
[   22.664261] ldi_fps:LDI EVT0 Not Support. Skip!!
[   28.307653] ldi_fps:LDI EVT0 Not Support. Skip!!
[   33.854402] ldi_fps:LDI EVT0 Not Support. Skip!!
[   36.202872] sec_bat_swelling_check: Fail to sec-charger get (9=>-22)
[   39.272134] ldi_fps:LDI EVT0 Not Support. Skip!!
[   44.534481] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
[   44.534858] (sec_debug_set_upload_cause) type = 0x85
[   44.616817] sec_debug_check_crash_key code 172 value 1 state 0 enable 0
[   44.626827] sec_debug_check_crash_key code 115 value 1 state 0 enable 0
[   44.643456] sec_debug_check_crash_key code 114 value 1 state 0 enable 0
[   44.759704] ldi_fps:LDI EVT0 Not Support. Skip!!
[   50.375368] ldi_fps:LDI EVT0 Not Support. Skip!!
[   51.763488] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
[   51.810108] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
[   51.837115] sec_debug_check_crash_key code 116 value 0 state 0 enable 0
[   51.837267] (sec_debug_set_upload_cause) type = 0xcafebabe
[   51.870093] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
[   53.600506] sec_debug_check_crash_key code 114 value 1 state 0 enable 0
[   53.602470] sec_debug_check_crash_key code 115 value 1 state 0 enable 0
[   53.610825] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
[   53.610975] (sec_debug_set_upload_cause) type = 0x85
[   53.663462] sec_debug_check_crash_key code 172 value 1 state 0 enable 0
[   55.906176] ldi_fps:LDI EVT0 Not Support. Skip!!

No errors detected