Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.06.03 21:25:56 =~=~=~=~=~=~=~=~=~=~=~=
- 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- MP SPI-NOR Bootstrap v0.2
- Boot image offset: 0x10000. Booting Image .....
- 0567Will set the following freq...
- PLL1: 800 MHz, PLL2: 540 MHz, CPU freq: 540 MHz, AHB freq: 270 MHz, DDR freq: 800 MHz
- go...
- *********************************************
- Please input Space to run Linux
- Please input ESC to run UBOOT
- Please input . to run burn-in
- Otherwise, system will run Linux after 1 sec
- *********************************************
- Load image from SPI-NOR offset 0xd0000 to sdram 0x4000000
- Jump 0x4000000
- Uncompressing Linux..................................................................................................................................................................................................... done, booting the kernel.
- Linux version 2.6.28 (root@gm8126.localdomain) (gcc version 4.4.0 (Faraday C/C++ Compiler Release 20100325) ) #154 PREEMPT Tue Dec 4 03:04:11 HKT 2012
- CPU: FA626TE [66056261] revision 1 (ARMv5TE), cr=0000797f
- CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
- Machine: Faraday GM8126
- Warning: bad configuration page, trying to continue
- Memory policy: ECC disabled, Data cache writeback
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: mem=128M console=uart,shift,2,io,0xF9830000,38400
- Early serial console at I/O port 0xf9830000 (options '38400', shift 2)
- console [uart0] enabled
- PID hash table entries: 512 (order: 9, 2048 bytes)
- IC: GM8128 MP
- GM Clock: CPU = 540 MHz, AHBCLK = 270 MHz, PLL1CLK = 800 MHz, PLL2CLK = 540 MHz
- console handover: boot [uart0] -> real [ttyS0]
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 128MB = 128MB total
- Memory: 123348KB available (3366K code, 311K data, 2712K init)
- Calibrating delay loop... 532.48 BogoMIPS (lpj=266240)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- net_namespace: 288 bytes
- Fmem: node 0 is online, alloc pages = 8192(active pages = 32768)
- high_memory:0xc8000000, VM Start:0xc8800000, End:0xe0000000
- NET: Registered protocol family 16
- PMU: Mapped at 0xf9900000
- pmu_get_cpu_clk:221 <fclk_mode=2, pll2_out=540000000>
- Attach GM AHB-DMA Driver
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switched to NOHz mode on CPU #0
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- NET: Registered protocol family 1
- Video Timer(timer3) Max 31000ms in 0xf9720840 HZ.
- JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- msgmni has been set to 241
- io scheduler noop registered
- io scheduler anticipatory registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- probe ftgpio010.0 OK!!, at c8858000
- probe ftgpio010.1 OK!!, at c885c000
- probe ftgpio010.2 OK!!, at c8860000
- Serial: 8250/16550 driver 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0xf9830000 (irq = 9) is a 16550A
- serial8250: ttyS1 at I/O 0xf9840000 (irq = 10) is a 16550A
- serial8250: ttyS3 at I/O 0xf9880000 (irq = 21) is a 16550A
- brd: module loaded
- loop: module loaded
- PPP generic driver version 2.4.2
- NET: Registered protocol family 24
- rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- usbcore: registered new interface driver rtl8150
- usbcore: registered new interface driver asix
- usbcore: registered new interface driver cdc_ether
- usbcore: registered new interface driver net1080
- usbcore: registered new interface driver cdc_subset
- usbcore: registered new interface driver zaurus
- Linux video capture interface: v2.00
- Driver 'sd' needs updating - please use bus_type methods
- Driver 'sr' needs updating - please use bus_type methods
- Creating 6 MTD partitions on "wb_spi_flash":
- 0x000d0000-0x005ff000 : "Linux Section"
- 0x00600000-0x01000000 : "User Section"
- 0x00001000-0x00010000 : "Loader Section"
- 0x00010000-0x000b0000 : "BurnIn Section"
- 0x000b0000-0x000ce000 : "UBoot Section"
- 0x000ce000-0x000d0000 : "CFG Section"
- Probe FTSSP010 SPI Controller at 0x98200000 (irq 6)
- usbmon: debugfs is not available
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- AMBA bus_register ok
- Enter Device A
- temp = 340
- Drive Vbus because of ID pin shows Device A
- otg2xx device_register ok
- AMBA_bus_match(...) Found Driver FOTG2XX_DRV
- AMBA_bus_match(...) Found Driver FOTG2XX_DRV
- FOTG2XX_DRV fotg2xx_dev: GM USB2.0 Host Controller
- FOTG2XX_DRV fotg2xx_dev: new USB bus registered, assigned bus number 1
- FOTG2XX_DRV fotg2xx_dev: irq 4, io mem 0xf9220000
- FOTG2XX_DRV fotg2xx_dev: USB 2.0 started, EHCI 1.00
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- FOTG200 Controller Initialization
- fotg200 int enable = 1f30
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- i2c /dev entries driver
- ftiic010 ftiic010.0: irq 18, mapped at c886c000
- Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
- ALSA device list:
- No soundcards found.
- TCP cubic registered
- NET: Registered protocol family 17
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- Freeing init memory: 2712K
- usb 1-1: new high speed USB device using FOTG2XX_DRV and address 2
- port status 10009
- 2nd port status 10009
- ***************************************
- Busybox starts to run
- ***************************************
- Mounting root fs rw ...
- Mounting other filesystems ...
- Setting hostname ...
- Mounting user's MTD partion
- Empty flash at 0x007506a8 ends at 0x007507b8
- FTMAC with FARADAY Internal PHY support
- FTMAC110 Driver (Linux 2.6) 01/10/11 - (C) 2011 GM Corp.
- reset Faraday Internal PHY.
- ADDR: 00:64:03:00:12:51
- ftmac110_link_change:2225 <SPEED100>
- ftmac110_link_change:2239 <FULL>
- Archive: /mnt/mtd/ipc/ipc_server
- inflating: ipc_server
- usb 1-1: configuration #1 chosen from 1 choice
- ftmac110_link_change:2225 <SPEED100>
- ftmac110_link_change:2239 <FULL>
- Archive: /mnt/mtd/ipc/onvif
- inflating: onvif
- check..
- mount: mounting none on /proc/bus/usb failed: No such file or directory
- grep: /proc/bus/usb/devices: No such file or directory
- rt5370sta: module license 'unspecified' taints kernel.
- rtusb init rt3070STA --->
- === pAd = c89ce000, size = 528648 ===
- <-- RTMPAllocTxRxRingMemory, Status=0
- <-- RTMPAllocAdapterBlock, Status=0
- usbcore: registered new interface driver rt3070STA
- i2c: 0x201200
- sinit driver init successful!
- mmc0: SDHCI controller on <NULL> [ftsdc010] using DMA
- encript driver init successful!
- infrared driver init successful!
- relay driver init successful!
- reset driver init successful!
- rs485 driver init successful!
- ft-32ssp: common[ver:0.3.4] INIT OK!
- card->cardno = 2
- card->pbase = 98a00000
- card->vbase = c8abe000
- card->irq = 11
- my_card->capture.dma_ch = 4
- my_card->playback.dma_ch = 5
- ft-32ssp: SoundCard(2) attached OK (c43745d0)
- I2S probe ok in Slave mode.
- Init SAR ADC done.
- register sar adc device (0) OK!!
- extalarm driver init successful!
- wifikey driver init successful!
- light driver init successful!
- WDT base virtual address = c8ad8000
- WDT base virtual address = c8adc000
- wdt: default timeout: 5 sec.
- wdt: default time(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
- out: 20 sec.
- RTMP_TimerListAdd: add timer obj c8a18930!
- RTMP_TimerListAdd: add timer obj c8a18948!
- RTMP_TimerListAdd: add timer obj c8a18960!
- RTMP_TimerListAdd: add timer obj c8a18918!
- RTMP_TimerListAdd: add timer obj c8a188d0!
- RTMP_TimerListAdd: add timer obj c8a188e8!
- RTMP_TimerListAdd: add timer obj c89e3364!
- RTMP_TimerListAdd: add timer obj c89cffa4!
- RTMP_TimerListAdd: add timer obj c89cffc4!
- RTMP_TimerListAdd: add timer obj c89e33c0!
- RTMP_TimerListAdd: add timer obj c89d279c!
- RTMP_TimerListAdd: add timer obj c89d200c!
- RTMP_TimerListAdd: add timer obj c89d2780!
- RTMP_TimerListAdd: add timer obj c89d2a00!
- RTMP_TimerListAdd: add timer obj c89d2818!
- RTMP_TimerListAdd: add timer obj c89d2834!
- RTMP_TimerListAdd: add timer obj c89d27b8!
- RTMP_TimerListAdd: add timer obj c89d27d4!
- RTMP_TimerListAdd: add timer obj c89d27f0!
- RTMP_TimerListAdd: add timer obj c89e3334!
- RTMP_TimerListAdd: add timer obj c89e33a4!
- -->RTUSBVenderReset
- <--RTUSBVenderReset
- Key1Str is Invalid key length(0) or Type(0)
- Key2Str is Invalid key length(0) or Type(0)
- Key3Str is Invalid key length(0) or Type(0)
- Key4Str is Invalid key length(0) or Type(0)
- 1. Phy Mode = 9
- 2. Phy Mode = 9
- NVM is Efuse and its size =2d[2d0-2fc]
- (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
- 3. Phy Mode = 9
- [mAntCfgInit: primary/secondary ant 0/1
- [m<7>Abnormal time diff = 11 ms
- RTMPSetPhyMode: channel is out of range, use first channel=1
- MCS Set = ff 00 00 00 00
- <==== rt28xx_init, Status=0
- 0x1300 = 00064300
- ADDR: 10:d1:dc:0b:82:f5
- ftmac110_link_change:2225 <SPEED100>
- ftmac110_link_change:2239 <FULL>
- killall: udhcpc: no process killed
- udhcpc (v1.13.4) started
- Sending discover...
- Sending select for 192.168.2.22...
- input_mode = 0
- Lease of 192.168.2.22 obtained, lease time 864000
- deleting routers
- route: SIOCDELRT: No such process
- adding dns 192.168.2.1
- [1;32mipc_server[0m [0;0mnetflag.dat[0m [1;32monvif[0m [1;34msd[0m [0;0mwifi.mac[0m [0;0mwifi.type[0m
- [1;32mipc_server[0m [0;0mnetflag.dat[0m [1;32monvif[0m [1;34msd[0m [0;0mwifi.mac[0m [0;0mwifi.type[0m
- ls: /lib/libiniparser.so: No such file or directory
- [1;32m/lib/libNetLib.so[0m
- RTC time 120-06-01 13:29:12
- Set system time as date 06011329120.12.
- /mnt/mtd/ipc/run: line 7: /mnt/mtd/ipc/confSec: Permission denied
- /mnt/mtd/ipc/run: line 7: /mnt/mtd/ipc/confSec: Pei2c-adapter i2c-0: NAK!
- rmission denied
- sh: 15: unknown operand
- sh: 15: unknown operand
- keep rec length
- i2c-adapter i2c-0: I2C TX data 0x48 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x49 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x48 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x49 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x48 timeout!
- killall: arping: no proi2c-adapter i2c-0: NAK!
- cess killed
- i2c-adapter i2c-0: I2C TX data 0x49 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x48 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x49 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x48 timeout!
- i2c-adapter i2c-0: NAK!
- i2c-adapter i2c-0: I2C TX data 0x49 timeout!
- WDT base virtual address = c8ae0000
- Frammap: DDR0: memory base=0x4800000, memory size=0x2000000, alignment=4K
- Frammap: version 0.28.3, 1 DDR is managed.
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- videograph: Unknown symbol
- dvr_common: Unknown symbol video_setgraph
- insmod:dvr_common: Unknown symbol video_apply_flow
- cannotdvr_common: Unknown symbol printm_with_panic
- insertdvr_common: Unknown symbol video_set_src_nodirty
- '/mntdvr_common: Unknown symbol video_register_preprocess
- /mtd/dvr_common: Unknown symbol video_get_flow
- ipc/modvr_common: Unknown symbol video_suspend
- dules/vidvr_common: Unknown symbol get_property
- deogrdvr_common: Unknown symbol video_startgraph
- aph.kodvr_common: Unknown symbol video_cleargraph
- ': undvr_common: Unknown symbol video_create_queue
- known dvr_common: Unknown symbol query_propertyid
- symbol idvr_common: Unknown symbol video_update_flow
- n modudvr_common: Unknown symbol video_register_postprocess
- le, or dvr_common: Unknown symbol printm
- unknowndvr_common: Unknown symbol set_property
- paradvr_common: Unknown symbol video_destroy_queue
- meter
- dvr_common: Unknown symbol video_rearrange_queue
- dvr_common: Unknown symbol video_setfree
- dvr_enc: Unknown symbol gmcfg_getfieldint
- insmod:dvr_enc: Unknown symbol dvr_common_retrieve_info
- canndvr_enc: Unknown symbol video_remap_pfn_range
- ot indvr_enc: Unknown symbol printm_with_panic
- sert 'dvr_enc: Unknown symbol dvr_register_postprocess
- /mnt/mdvr_enc: Unknown symbol dvr_graph_set_property_directly
- td/ipdvr_enc: Unknown symbol gmcfg_open
- c/modudvr_enc: Unknown symbol dvr_queue_destroy
- les/dvrdvr_enc: Unknown symbol dvr_queue_allocate
- _commodvr_enc: Unknown symbol print_debug
- n.ko':dvr_enc: Unknown symbol dvr_graph_set_flow_flag
- unknodvr_enc: Unknown symbol PROPID
- wn symdvr_enc: Unknown symbol video_get_buffer_remap_offset
- bol idvr_enc: Unknown symbol DvrProcRoot
- n modudvr_enc: Unknown symbol dvr_graph_apply_flow
- le, odvr_enc: Unknown symbol video_entity_register
- r unknowdvr_enc: Unknown symbol video_buf_arrange_size
- n paramedvr_enc: Unknown symbol dvr_register_preprocess
- ter
- dvr_enc: Unknown symbol enter_panic
- dvr_enc: Unknown symbol dvr_common_store_info
- dvr_enc: Unknown symbol print_user_last_api_data
- dvr_enc: Unknown symbol video_entity_deregister
- dvr_enc: Unknown symbol dvr_graph_add_link
- dvr_enc: Unknown symbol gmcfg_close
- dvr_enc: Unknown symbol dvr_graph_get_property
- dvr_enc: Unknown symbol dvr_graph_update_flow
- dvr_enc: Unknown symbol printm
- dvr_enc: Unknown symbol set_property
- dvr_enc: Unknown symbol video_get_queue_number
- dvr_enc: Unknown symbol dvr_graph_destroy
- dvr_enc: Unknown symbol dvr_graph_del_link
- dvr_enc: Unknown symbol dvr_graph_update_flow_list
- dvr_enc: Unknown symbol video_set_disable_mode
- dvr_enc: Unknown symbol dvr_graph_create
- dvr_enc: Unknown symbol dvr_graph_set_property
- insmod: cannot insert '/mnt/mtd/ipc/modules/dvr_enc.ko': unknown symbol in module, or unknown parameter
- fcap_common: Unknown symbol video_entity_register
- fcap_common: Unknown symbol video_entity_deregister
- fcap0: Unknown symbol fcap_dev_power_ctrl
- insmod: cannot insert '/mnt/mtd/ipc/modules/fcap_common.ko': unknown symfcap1: Unknown symbol fcap_dev_power_ctrl
- bol in moWDT base virtual address = c8b68000
- dule, or unknown parameter
- insmod: cannot insert '/mnt/mtd/ipc/modules/fcap0.ko': unknown symbol in module, or unknown parameter
- insmod: cannofcap200_ov10630: Unknown symbol fcap_input_register
- t insertfcap200_ov10630: Unknown symbol fcap_create_proc_entry
- '/mnt/mfcap200_ov10630: Unknown symbol fcap_input_unregister
- td/ipc/modulesfcap200_ov10630: Unknown symbol fcap_drv_get_input_API_ver
- /fcap1.fcap200_ov10630: Unknown symbol fcap_remove_proc_entry
- ko': fcap200_ov10630: Unknown symbol Capture_ClockOut_Config
- unknown sfcap200_ov10630: Unknown symbol Capture_Port_Config
- ymbol in module, or unknown parameter
- insmod: cannot insert '/mnt/mtd/ipc/modules/fcap200_ov10630.ko': unknown symbol in module, or unknown parameter
- fscaler0: Unknown symbol printm_with_panic
- fscaler0: Unknown symbol video_entity_register
- fscaler0: Unknown symbol video_entity_deregister
- fscaler0: Unknown symbol printm
- favc_drv: Unknown symbol video_entity_register
- insmod: cannot insert 'favc_drv: Unknown symbol video_entity_deregister
- /mnt/mtd/ipc/modules/fscaler0.favc_drv: Unknown symbol video_postprocess
- ko': favc_drv: Unknown symbol video_preprocess
- unknown symbol in module, or unknown parameter
- insmod: cannot insert '/mnt/mtd/ipc/modules/favc_drv.ko': unknown symbol in module, or unknown parameter
- MCP100 driver with CPU for VG,
- fmpeg4_drv: Unknown symbol video_entity_register
- fmpeg4_drv: Unknown symbol video_entity_deregister
- fmpeg4_drv: Unknown symbol video_postprocess
- fmpeg4_drv: Unknown symbol video_preprocess
- ftdi210: Unknown symbol video_entity_register
- insmod: cannot insert ftdi210: Unknown symbol video_entity_deregister
- '/mnt/mtd/ipc/modules/fmpeg4_drv.ko': unknown symbol in module, or unknown parameter
- insmod: cannot insert '/mnt/mtd/ipc/modules/fmjpeg_drv.ko': unknown symbol in module, or unknown parameter
- insmod: cannot insert '/mnt/mtd/ipc/modules/ftdi210.ko': unknown symbol in module, or unknown parameter
- killall: gerddns: no process killed
- killall: upnp_map: no process killed
- killall: upnp_map: no process killed
- killall: ddns_update: no process killed
- killall: mdns: no process killed
- motor driver init successful!
- WDT base virtual address = c8be4000
- / # umount: can't forcibly umount /mnt/mtd/ipc/tmpfs/sd: Invalid argument
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- reset: 0x45003
- TimeZone: -1
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_indencript: 0x55003
- ex= 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:19
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:20
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:21
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= 0encript: 0x55000
- , 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:22
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:23
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- reset: 0x55000
- TimeZone: -1
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: toencript: 0x55000
- ur_index= 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:24
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:26
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:27
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:28
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- reset: 0x55000
- TimeZone: -1
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tourencript: 0x55000
- _index= 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:29
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:30
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:31
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:32
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:33
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- reset: 0x55000
- TimeZone: -1
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: touencript: 0x55000
- r_index= 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:35
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- HI_Media_SDKInit: HI_SDK_Init() error!
- HI_Media_Init: init sdk failed!
- HI_Websvr_Init: init media failed!
- workthread: websvr start failed!
- ipc_server stop: 2020-06-01 13:29:36
- log: mode=0
- workthread: log init succeed.
- timer: proc start.
- workthread: timer init succeed.
- libs_initnettype(Lan): succeed.
- videocomm(0): 6 1280 720
- videocomm(1): 7 640 352
- videocomm(2): 8 320 176
- cp -r /mnt/mtd/ipc/web/images/logo0.jpg /mnt/mtd/ipc/web/images/logo.jpg
- cp: cannot stat '/mnt/mtd/ipc/web/images/logo0.jpg': No such file or directory
- TimeZone: -1
- reset: 0x55000
- workthread: init ini succeed.
- workthread: ntpsvr init succeed.
- workthread: reset init succeed.
- ptz type: motor
- motor: alarm_presetindex=0, init_presetindex=0
- motor: tour_enable=1, tour_times=50
- motor: tour_index= encript: 0x55000
- 0, 1, 2, 3, 4, 5, 6, 7
- motor: tour_interval= 5, 5, 5, 5, 5, 5, 5, 5
- motor: timerpreset_enable=0, timerpreset_index=0, timerpreset_interval=600
- motor: limit_hor_min=0, limit_hor_max=0, limit_ver_min=0, limit_ver_max=0
- workthread: ptz init succeed.
- MP SPI-NOR Bootstrap v0.2
- Boot image offset: 0x10000. Booting Image .....
- 0567Will set the following freq...
- PLL1: 800 MHz, PLL2: 540 MHz, CPU freq: 540 MHz, AHB freq: 270 MHz, DDR freq: 800 MHz
- go...
- *********************************************
- Please input Space to run Linux
- Please input ESC to run UBOOT
- Please input . to run burn-in
- Otherwise, system will run Linux after 1 sec
- *********************************************
- Load image from SPI-NOR offset 0xd0000 to sdram 0x4000000
- Jump 0x4000000
- Uncompressing Linux..................................................................................................................................................................................................... done, booting the kernel.
- Linux version 2.6.28 (root@gm8126.localdomain) (gcc version 4.4.0 (Faraday C/C++ Compiler Release 20100325) ) #154 PREEMPT Tue Dec 4 03:04:11 HKT 2012
- CPU: FA626TE [66056261] revision 1 (ARMv5TE), cr=0000797f
- CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
- Machine: Faraday GM8126
- Warning: bad configuration page, trying to continue
- Memory policy: ECC disabled, Data cache writeback
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: mem=128M console=uart,shift,2,io,0xF9830000,38400
- Early serial console at I/O port 0xf9830000 (options '38400', shift 2)
- console [uart0] enabled
- PID hash table entries: 512 (order: 9, 2048 bytes)
- IC: GM8128 MP
- GM Clock: CPU = 540 MHz, AHBCLK = 270 MHz, PLL1CLK = 800 MHz, PLL2CLK = 540 MHz
- console handover: boot [uart0] -> real [ttyS0]
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 128MB = 128MB total
- Memory: 123348KB available (3366K code, 311K data, 2712K init)
- Calibrating delay loop... 532.48 BogoMIPS (lpj=266240)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- net_namespace: 288 bytes
- Fmem: node 0 is online, alloc pages = 8192(active pages = 32768)
- high_memory:0xc8000000, VM Start:0xc8800000, End:0xe0000000
- NET: Registered protocol family 16
- PMU: Mapped at 0xf9900000
- pmu_get_cpu_clk:221 <fclk_mode=2, pll2_out=540000000>
- Attach GM AHB-DMA Driver
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switched to NOHz mode on CPU #0
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- NET: Registered protocol family 1
- V
Add Comment
Please, Sign In to add comment