Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.18.9-arch1-1-ARCH (builduser@heftig-19946) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 19 21:19:17 UTC 2018
- [ 0.000000] Command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz archisolabel=$isolabel img_dev=/dev/disk/by-uuid/1477AD651C030862 img_loop=/isos/archlinux-2018.10.01-x86_64.iso earlymodules=loop
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: /GA-MA770-S3, BIOS F7e 08/12/2009
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] total RAM covered: 2047M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
- [ 0.000000] found SMP MP-table at [mem 0x000f4e30-0x000f4e3f] mapped at [(____ptrval____)]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
- [ 0.000000] BRK [0x3c2a1000, 0x3c2a1fff] PGTABLE
- [ 0.000000] BRK [0x3c2a2000, 0x3c2a2fff] PGTABLE
- [ 0.000000] BRK [0x3c2a3000, 0x3c2a3fff] PGTABLE
- [ 0.000000] BRK [0x3c2a4000, 0x3c2a4fff] PGTABLE
- [ 0.000000] BRK [0x3c2a5000, 0x3c2a5fff] PGTABLE
- [ 0.000000] BRK [0x3c2a6000, 0x3c2a6fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x3377b000-0x35bb4fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F6800 000014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 0x000000007FEE3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: FACP 0x000000007FEE3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: DSDT 0x000000007FEE30C0 004A2D (v01 GBT GBTUACPI 00001000 MSFT 03000000)
- [ 0.000000] ACPI: FACS 0x000000007FEE0000 000040
- [ 0.000000] ACPI: SSDT 0x000000007FEE7BC0 000206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
- [ 0.000000] ACPI: HPET 0x000000007FEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
- [ 0.000000] ACPI: MCFG 0x000000007FEE7E40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: APIC 0x000000007FEE7B00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x7fedc000-0x7fedffff]
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007fedffff]
- [ 0.000000] Normal empty
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fedffff]
- [ 0.000000] Reserved but unavailable: 386 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fedffff]
- [ 0.000000] On node 0 totalpages: 523902
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8124 pages used for memmap
- [ 0.000000] DMA32 zone: 519904 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
- [ 0.000000] [mem 0x7ff00000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
- [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
- [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
- [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515693
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz archisolabel=$isolabel img_dev=/dev/disk/by-uuid/1477AD651C030862 img_loop=/isos/archlinux-2018.10.01-x86_64.iso earlymodules=loop
- [ 0.000000] AGP: Checking aperture...
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] AGP: Node 0: aperture [bus addr 0x981e000000-0x981fffffff] (32MB)
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Memory: 2001636K/2095608K available (10252K kernel code, 1335K rwdata, 3608K rodata, 1504K init, 636K bss, 93972K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 34439 entries in 135 pages
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
- [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
- [ 0.000000] Offload RCU callbacks from CPUs: (none).
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] ACPI: Core revision 20180531
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
- [ 0.000000] hpet clockevent registered
- [ 0.003333] APIC: Switch to symmetric I/O mode setup
- [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.019999] tsc: Fast TSC calibration using PIT
- [ 0.023333] tsc: Detected 2210.166 MHz processor
- [ 0.023333] tsc: Marking TSC unstable due to TSCs unsynchronized
- [ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.51 BogoMIPS (lpj=7367220)
- [ 0.023333] pid_max: default: 32768 minimum: 301
- [ 0.023333] Security Framework initialized
- [ 0.023333] Yama: becoming mindful.
- [ 0.023333] AppArmor: AppArmor disabled by boot time parameter
- [ 0.026801] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.027343] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.027387] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.027406] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.027813] mce: CPU supports 5 MCE banks
- [ 0.027821] LVT offset 0 assigned for vector 0xf9
- [ 0.027824] process: using AMD E400 aware idle routine
- [ 0.027826] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- [ 0.027827] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
- [ 0.027830] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
- [ 0.027840] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.027840] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.027982] Freeing SMP alternatives memory: 28K
- [ 0.033333] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (family: 0xf, model: 0x6b, stepping: 0x1)
- [ 0.050017] Performance Events: AMD PMU driver.
- [ 0.050022] ... version: 0
- [ 0.050023] ... bit width: 48
- [ 0.050024] ... generic registers: 4
- [ 0.050025] ... value mask: 0000ffffffffffff
- [ 0.050026] ... max period: 00007fffffffffff
- [ 0.050027] ... fixed-purpose events: 0
- [ 0.050028] ... event mask: 000000000000000f
- [ 0.056672] Hierarchical SRCU implementation.
- [ 0.076777] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.083338] smp: Bringing up secondary CPUs ...
- [ 0.123360] x86: Booting SMP configuration:
- [ 0.123362] .... node #0, CPUs: #1
- [ 0.003333] do_IRQ: 1.55 No irq handler for vector
- [ 0.206791] smp: Brought up 1 node, 2 CPUs
- [ 0.206791] smpboot: Max logical packages: 2
- [ 0.206791] smpboot: Total of 2 processors activated (8844.81 BogoMIPS)
- [ 0.207298] devtmpfs: initialized
- [ 0.207298] x86/mm: Memory block size: 128MB
- [ 0.207320] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
- [ 0.207320] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.207320] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.207320] pinctrl core: initialized pinctrl subsystem
- [ 0.207320] RTC time: 20:05:35, date: 12/09/19
- [ 0.207320] NET: Registered protocol family 16
- [ 0.207373] audit: initializing netlink subsys (disabled)
- [ 0.207391] audit: type=2000 audit(1575921935.206:1): state=initialized audit_enabled=0 res=1
- [ 0.210034] cpuidle: using governor ladder
- [ 0.213345] cpuidle: using governor menu
- [ 0.213346] node 0 link 0: io port [c000, ffff]
- [ 0.213350] TOM: 0000000080000000 aka 2048M
- [ 0.213350] node 0 link 0: mmio [a0000, bffff]
- [ 0.213350] node 0 link 0: mmio [80000000, dfffffff]
- [ 0.213352] node 0 link 0: mmio [f0000000, fe02ffff]
- [ 0.213354] node 0 link 0: mmio [e0000000, e03fffff]
- [ 0.213358] bus: [bus 00-03] on node 0 link 0
- [ 0.213359] bus: 00 [io 0x0000-0xffff]
- [ 0.213360] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.213361] bus: 00 [mem 0x80000000-0xefffffff]
- [ 0.213362] bus: 00 [mem 0xf0000000-0xfcffffffff]
- [ 0.213426] ACPI: bus type PCI registered
- [ 0.213429] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.213538] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.213542] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.213561] PCI: Using configuration type 1 for base access
- [ 0.214969] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.214969] ACPI: Added _OSI(Module Device)
- [ 0.214969] ACPI: Added _OSI(Processor Device)
- [ 0.214969] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.214969] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.214969] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.222419] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.222747] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.222762] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.222772] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.222782] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.222802] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.222812] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.222821] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.222831] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.222851] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.222861] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.222870] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.222882] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.222903] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.222914] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.222925] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.222935] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.222957] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.222968] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.222979] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.222989] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223011] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223022] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223032] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223043] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.223064] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223075] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223086] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.223096] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223118] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.223129] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223139] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223150] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223171] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223182] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223193] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223203] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.223225] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223236] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223246] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223257] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.223279] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414)
- [ 0.223290] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414)
- [ 0.223300] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414)
- [ 0.223311] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414)
- [ 0.227330] ACPI: Interpreter enabled
- [ 0.227362] ACPI: (supports S0 S1 S4 S5)
- [ 0.227364] ACPI: Using IOAPIC for interrupt routing
- [ 0.227490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.227759] ACPI: Enabled 6 GPEs in block 00 to 1F
- [ 0.236922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.236931] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.236937] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 0.237456] PCI host bridge to bus 0000:00
- [ 0.237459] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.237461] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.237463] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.237465] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.237467] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
- [ 0.237469] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.237483] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
- [ 0.237502] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
- [ 0.237685] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
- [ 0.237712] pci 0000:00:02.0: enabling Extended Tags
- [ 0.237749] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.237920] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
- [ 0.237946] pci 0000:00:0a.0: enabling Extended Tags
- [ 0.237981] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- [ 0.238145] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
- [ 0.238170] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
- [ 0.238181] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
- [ 0.238193] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
- [ 0.238204] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
- [ 0.238215] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
- [ 0.238227] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
- [ 0.238408] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
- [ 0.238430] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
- [ 0.238652] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
- [ 0.238674] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
- [ 0.238884] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
- [ 0.238906] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
- [ 0.239116] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
- [ 0.239139] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
- [ 0.239347] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
- [ 0.239369] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
- [ 0.239583] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
- [ 0.239610] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
- [ 0.239710] pci 0000:00:13.5: supports D1 D2
- [ 0.239712] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
- [ 0.239869] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.239899] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
- [ 0.240130] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
- [ 0.240152] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
- [ 0.240163] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
- [ 0.240174] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
- [ 0.240186] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
- [ 0.240197] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
- [ 0.240222] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
- [ 0.240223] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
- [ 0.240225] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
- [ 0.240227] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
- [ 0.240372] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.240402] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
- [ 0.240486] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.240633] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
- [ 0.240852] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.241052] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.241193] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.241328] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.241471] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.241680] pci 0000:01:00.0: [10de:0141] type 00 class 0x030000
- [ 0.241700] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
- [ 0.241713] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.241725] pci 0000:01:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
- [ 0.241741] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.241855] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.241863] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.241867] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- [ 0.241870] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
- [ 0.241874] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.241937] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.241967] pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
- [ 0.241995] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit]
- [ 0.242027] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.242037] pci 0000:02:00.0: enabling Extended Tags
- [ 0.242122] pci 0000:02:00.0: supports D1 D2
- [ 0.242124] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.242218] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.242227] pci 0000:00:0a.0: PCI bridge to [bus 02]
- [ 0.242231] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.242234] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.242238] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
- [ 0.242252] pci_bus 0000:03: extended config space not accessible
- [ 0.242332] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
- [ 0.242337] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.242341] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
- [ 0.242346] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.242348] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 0.242350] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.242352] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.242354] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
- [ 0.242356] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
- [ 0.242684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.242795] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.242906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.243015] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.243123] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.243231] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.243351] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.243460] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 0.244631] pci 0000:01:00.0: vgaarb: setting as boot VGA device
- [ 0.244631] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.244631] pci 0000:01:00.0: vgaarb: bridge control possible
- [ 0.244631] vgaarb: loaded
- [ 0.244631] pps_core: LinuxPPS API ver. 1 registered
- [ 0.244631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.244631] PTP clock support registered
- [ 0.244631] EDAC MC: Ver: 3.0.0
- [ 0.244631] PCI: Using ACPI for IRQ routing
- [ 0.256031] PCI: pci_cache_line_size set to 64 bytes
- [ 0.256098] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- [ 0.256100] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
- [ 0.256260] NetLabel: Initializing
- [ 0.256262] NetLabel: domain hash size = 128
- [ 0.256262] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.256283] NetLabel: unlabeled traffic allowed by default
- [ 0.256291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.256291] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- [ 0.257728] clocksource: Switched to clocksource hpet
- [ 0.278338] VFS: Disk quotas dquot_6.6.0
- [ 0.278366] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.278472] pnp: PnP ACPI init
- [ 0.278664] system 00:00: [io 0x04d0-0x04d1] has been reserved
- [ 0.278666] system 00:00: [io 0x0220-0x0225] has been reserved
- [ 0.278668] system 00:00: [io 0x0290-0x0294] has been reserved
- [ 0.278676] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.279070] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
- [ 0.279074] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
- [ 0.279111] system 00:01: [io 0x4100-0x411f] has been reserved
- [ 0.279114] system 00:01: [io 0x0228-0x022f] has been reserved
- [ 0.279116] system 00:01: [io 0x040b] has been reserved
- [ 0.279122] system 00:01: [io 0x04d6] has been reserved
- [ 0.279124] system 00:01: [io 0x0c00-0x0c01] has been reserved
- [ 0.279126] system 00:01: [io 0x0c14] has been reserved
- [ 0.279128] system 00:01: [io 0x0c50-0x0c52] has been reserved
- [ 0.279130] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
- [ 0.279140] system 00:01: [io 0x0c6f] has been reserved
- [ 0.279142] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.279144] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.279146] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
- [ 0.279149] system 00:01: [io 0x4000-0x40fe] has been reserved
- [ 0.279151] system 00:01: [io 0x4210-0x4217] has been reserved
- [ 0.279154] system 00:01: [io 0x0b00-0x0b1f] could not be reserved
- [ 0.279156] system 00:01: [io 0x0238-0x023f] has been reserved
- [ 0.279159] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
- [ 0.279165] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.279482] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.279770] pnp 00:03: [dma 2]
- [ 0.279814] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.280229] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.280601] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.280705] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.280711] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.281026] system 00:07: [mem 0x000cf000-0x000cffff] has been reserved
- [ 0.281029] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.281031] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.281033] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.281035] system 00:07: [mem 0x7fee0000-0x7fefffff] could not be reserved
- [ 0.281038] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.281040] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.281042] system 00:07: [mem 0x00100000-0x7fedffff] could not be reserved
- [ 0.281045] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.281048] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved
- [ 0.281050] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 0.281056] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.281092] pnp: PnP ACPI: found 8 devices
- [ 0.288816] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.288857] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
- [ 0.288860] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.288863] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- [ 0.288866] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
- [ 0.288869] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.288875] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
- [ 0.288877] pci 0000:00:0a.0: PCI bridge to [bus 02]
- [ 0.288879] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.288882] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.288885] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
- [ 0.288890] pci 0000:00:14.4: PCI bridge to [bus 03]
- [ 0.288893] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.288899] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
- [ 0.288904] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.288912] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.288914] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.288916] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.288918] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.288920] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff window]
- [ 0.288922] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.288924] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
- [ 0.288926] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.288928] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.288930] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
- [ 0.288931] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
- [ 0.288934] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 0.288935] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
- [ 0.288937] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.288939] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.288941] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
- [ 0.288943] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.288944] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.288946] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff window]
- [ 0.289106] NET: Registered protocol family 2
- [ 0.289350] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
- [ 0.289374] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.289467] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.289590] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.289684] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.289710] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.289812] NET: Registered protocol family 1
- [ 0.289820] NET: Registered protocol family 44
- [ 0.373604] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 81788 usecs
- [ 0.456840] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6c6 took 81269 usecs
- [ 1.290020] pci 0000:00:13.2: OHCI: BIOS handoff failed (BIOS bug?) 00000184
- [ 1.346830] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6c6 took 869120 usecs
- [ 1.430163] pci 0000:00:13.3: quirk_usb_early_handoff+0x0/0x6c6 took 81368 usecs
- [ 1.503503] pci 0000:00:13.4: quirk_usb_early_handoff+0x0/0x6c6 took 71610 usecs
- [ 1.503872] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 1.503880] PCI: CLS 4 bytes, default 64
- [ 1.503939] Unpacking initramfs...
- [ 6.835129] Freeing initrd memory: 37096K
- [ 6.835276] Scanning for low memory corruption every 60 seconds
- [ 6.836233] Initialise system trusted keyrings
- [ 6.836246] Key type blacklist registered
- [ 6.836356] workingset: timestamp_bits=41 max_order=19 bucket_order=0
- [ 6.839381] zbud: loaded
- [ 6.839780] pstore: using lz4hc compression
- [ 6.842856] Key type asymmetric registered
- [ 6.842859] Asymmetric key parser 'x509' registered
- [ 6.842955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 6.843016] io scheduler noop registered
- [ 6.843018] io scheduler deadline registered
- [ 6.843106] io scheduler cfq registered (default)
- [ 6.843107] io scheduler mq-deadline registered
- [ 6.843108] io scheduler kyber registered
- [ 6.843153] io scheduler bfq registered
- [ 6.843994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 6.844114] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 6.844115] vesafb: scrolling: redraw
- [ 6.844117] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 6.844156] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
- [ 6.879784] Console: switching to colour frame buffer device 160x64
- [ 6.915198] fb0: VESA VGA frame buffer device
- [ 6.915290] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 6.915307] ACPI: Power Button [PWRB]
- [ 6.915388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 6.915413] ACPI: Power Button [PWRF]
- [ 6.915992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 6.936812] 00:04: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
- [ 6.938354] rtc_cmos 00:02: RTC can wake from S4
- [ 6.938557] rtc_cmos 00:02: registered as rtc0
- [ 6.938584] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 6.938697] ledtrig-cpu: registered to indicate activity on CPUs
- [ 6.939124] NET: Registered protocol family 10
- [ 6.946163] Segment Routing with IPv6
- [ 6.946202] NET: Registered protocol family 17
- [ 6.946513] RAS: Correctable Errors collector initialized.
- [ 6.946818] registered taskstats version 1
- [ 6.946830] Loading compiled-in X.509 certificates
- [ 6.951165] Loaded X.509 cert 'Build time autogenerated kernel key: 383ffa8379c82d154075bba04ee7c064ed536b2d'
- [ 6.951211] zswap: loaded using pool lzo/zbud
- [ 6.957799] Key type big_key registered
- [ 6.958293] Magic number: 15:348:93
- [ 6.958414] rtc_cmos 00:02: setting system clock to 2019-12-09 20:05:42 UTC (1575921942)
- [ 6.958563] Unstable clock detected, switching default tracing clock to "global"
- If you want to keep using the local clock, then add:
- "trace_clock=local"
- on the kernel command line
- [ 6.961731] Freeing unused kernel image memory: 1504K
- [ 6.983403] Write protecting the kernel read-only data: 16384k
- [ 6.984800] Freeing unused kernel image memory: 2008K
- [ 6.985107] Freeing unused kernel image memory: 488K
- [ 6.985335] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 7.026942] loop: module loaded
- [ 7.138227] Floppy drive(s): fd0 is 1.44M
- [ 7.139543] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 7.139546] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 7.139769] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 7.157324] FDC 0 is a post-1991 82077
- [ 7.174267] Linux agpgart interface v0.103
- [ 7.204793] ACPI: bus type USB registered
- [ 7.204831] usbcore: registered new interface driver usbfs
- [ 7.204846] usbcore: registered new interface driver hub
- [ 7.212142] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 7.212170] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 7.212711] r8169 0000:02:00.0 eth0: RTL8168b/8111b, 00:1d:7d:ac:4e:29, XID 38000000, IRQ 24
- [ 7.212714] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
- [ 7.214435] SCSI subsystem initialized
- [ 7.226746] usbcore: registered new device driver usb
- [ 7.245131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.246188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.246191] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- [ 7.248407] ehci-pci: EHCI PCI platform driver
- [ 7.248731] ehci-pci 0000:00:13.5: EHCI Host Controller
- [ 7.248743] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
- [ 7.248750] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
- [ 7.248765] ehci-pci 0000:00:13.5: debug port 1
- [ 7.248834] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
- [ 7.260100] libata version 3.00 loaded.
- [ 7.263385] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
- [ 7.263498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
- [ 7.263501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.263503] usb usb1: Product: EHCI Host Controller
- [ 7.263504] usb usb1: Manufacturer: Linux 4.18.9-arch1-1-ARCH ehci_hcd
- [ 7.263506] usb usb1: SerialNumber: 0000:00:13.5
- [ 7.263701] hub 1-0:1.0: USB hub found
- [ 7.263711] hub 1-0:1.0: 10 ports detected
- [ 7.265783] ohci-pci: OHCI PCI platform driver
- [ 7.266086] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 7.266096] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
- [ 7.266155] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
- [ 7.275163] ahci 0000:00:12.0: version 3.0
- [ 7.275433] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
- [ 7.275549] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 7.275553] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 7.279740] scsi host1: ahci
- [ 7.281863] scsi host0: pata_atiixp
- [ 7.284640] scsi host3: pata_atiixp
- [ 7.284730] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
- [ 7.284731] ata2: DUMMY
- [ 7.286419] scsi host2: ahci
- [ 7.292330] scsi host4: ahci
- [ 7.292593] scsi host5: ahci
- [ 7.292665] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
- [ 7.292668] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
- [ 7.292671] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
- [ 7.292673] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
- [ 7.299051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 7.324151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
- [ 7.324155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.324157] usb usb2: Product: OHCI PCI host controller
- [ 7.324159] usb usb2: Manufacturer: Linux 4.18.9-arch1-1-ARCH ohci_hcd
- [ 7.324160] usb usb2: SerialNumber: 0000:00:13.0
- [ 7.324391] hub 2-0:1.0: USB hub found
- [ 7.324403] hub 2-0:1.0: 2 ports detected
- [ 7.324857] ohci-pci 0000:00:13.1: OHCI PCI host controller
- [ 7.324865] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
- [ 7.324921] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
- [ 7.384103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
- [ 7.384106] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.384107] usb usb3: Product: OHCI PCI host controller
- [ 7.384109] usb usb3: Manufacturer: Linux 4.18.9-arch1-1-ARCH ohci_hcd
- [ 7.384111] usb usb3: SerialNumber: 0000:00:13.1
- [ 7.384312] hub 3-0:1.0: USB hub found
- [ 7.384324] hub 3-0:1.0: 2 ports detected
- [ 7.384706] ohci-pci 0000:00:13.2: OHCI PCI host controller
- [ 7.384715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
- [ 7.384768] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
- [ 7.401307] checking generic (d0000000 500000) vs hw (d0000000 10000000)
- [ 7.401309] fb: switching to nouveaufb from VESA VGA
- [ 7.401344] Console: switching to colour dummy device 80x25
- [ 7.401549] nouveau 0000:01:00.0: NVIDIA NV43 (043100a4)
- [ 7.437546] nouveau 0000:01:00.0: bios: version 05.43.02.72.11
- [ 7.438351] nouveau 0000:01:00.0: fb: 256 MiB DDR2
- [ 7.444129] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
- [ 7.444131] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.444133] usb usb4: Product: OHCI PCI host controller
- [ 7.444134] usb usb4: Manufacturer: Linux 4.18.9-arch1-1-ARCH ohci_hcd
- [ 7.444136] usb usb4: SerialNumber: 0000:00:13.2
- [ 7.444562] hub 4-0:1.0: USB hub found
- [ 7.444575] hub 4-0:1.0: 2 ports detected
- [ 7.462385] ata1.00: HPA detected: current 234439535, native 234441648
- [ 7.462390] ata1.00: ATA-8: SAMSUNG HM121HC, LS100-10, max UDMA/100
- [ 7.462392] ata1.00: 234439535 sectors, multi 16: LBA48
- [ 7.462397] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 7.489151] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM121HC 0-10 PQ: 0 ANSI: 5
- [ 7.493429] ohci-pci 0000:00:13.3: OHCI PCI host controller
- [ 7.493439] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
- [ 7.493474] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
- [ 7.494398] sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/112 GiB)
- [ 7.494421] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.494423] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 7.494458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.497088] [TTM] Zone kernel: Available graphics memory: 1021380 kiB
- [ 7.497091] [TTM] Initializing pool allocator
- [ 7.497097] [TTM] Initializing DMA pool allocator
- [ 7.497121] nouveau 0000:01:00.0: DRM: VRAM: 252 MiB
- [ 7.497123] nouveau 0000:01:00.0: DRM: GART: 512 MiB
- [ 7.497128] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
- [ 7.497130] nouveau 0000:01:00.0: DRM: DCB version 3.0
- [ 7.497133] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
- [ 7.497136] nouveau 0000:01:00.0: DRM: DCB outp 01: 04011320 00000028
- [ 7.497138] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011322 00000000
- [ 7.497141] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 00c0c080
- [ 7.497143] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
- [ 7.497145] nouveau 0000:01:00.0: DRM: DCB conn 01: 1130
- [ 7.497146] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
- [ 7.497148] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
- [ 7.497150] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
- [ 7.499499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 7.499500] [drm] Driver supports precise vblank timestamp query.
- [ 7.502080] sda: sda1
- [ 7.502569] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 7.502640] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
- [ 7.502658] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
- [ 7.554108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
- [ 7.554110] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.554112] usb usb5: Product: OHCI PCI host controller
- [ 7.554114] usb usb5: Manufacturer: Linux 4.18.9-arch1-1-ARCH ohci_hcd
- [ 7.554115] usb usb5: SerialNumber: 0000:00:13.3
- [ 7.554320] hub 5-0:1.0: USB hub found
- [ 7.554332] hub 5-0:1.0: 2 ports detected
- [ 7.554740] ohci-pci 0000:00:13.4: OHCI PCI host controller
- [ 7.554749] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
- [ 7.554791] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
- [ 7.596687] usb 1-3: new high-speed USB device number 2 using ehci-pci
- [ 7.613060] ata4: SATA link down (SStatus 0 SControl 300)
- [ 7.614099] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
- [ 7.614101] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 7.614103] usb usb6: Product: OHCI PCI host controller
- [ 7.614105] usb usb6: Manufacturer: Linux 4.18.9-arch1-1-ARCH ohci_hcd
- [ 7.614106] usb usb6: SerialNumber: 0000:00:13.4
- [ 7.614287] hub 6-0:1.0: USB hub found
- [ 7.614298] hub 6-0:1.0: 2 ports detected
- [ 7.619701] ata6: SATA link down (SStatus 0 SControl 300)
- [ 7.633642] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo (____ptrval____)
- [ 7.643476] fbcon: nouveaufb (fb0) is primary device
- [ 7.754682] usb 1-3: New USB device found, idVendor=0951, idProduct=1621, bcdDevice= 1.10
- [ 7.754685] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 7.754686] usb 1-3: Product: DataTraveler 150
- [ 7.754688] usb 1-3: Manufacturer: Kingston
- [ 7.754689] usb 1-3: SerialNumber: 0018F30C08425B890A04000C
- [ 7.760698] usb-storage 1-3:1.0: USB Mass Storage device detected
- [ 7.760977] scsi host6: usb-storage 1-3:1.0
- [ 7.761117] usbcore: registered new interface driver usb-storage
- [ 7.763663] usbcore: registered new interface driver uas
- [ 7.766723] ata3: softreset failed (device not ready)
- [ 7.766726] ata3: applying PMP SRST workaround and retrying
- [ 7.773363] ata5: softreset failed (device not ready)
- [ 7.773365] ata5: applying PMP SRST workaround and retrying
- [ 7.787069] Console: switching to colour frame buffer device 160x64
- [ 7.787795] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
- [ 7.803370] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
- [ 7.923374] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 7.929745] ata3.00: HPA detected: current 2930275055, native 2930277168
- [ 7.929807] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
- [ 7.929809] ata3.00: 2930275055 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 7.929813] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 7.930029] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 7.930569] ata5.00: HPA detected: current 488395055, native 488397168
- [ 7.930641] ata5.00: ATA-7: WDC WD2500JS-55NCB1, 10.02E01, max UDMA/133
- [ 7.930643] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 7.930646] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 7.931308] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 7.931310] ata5.00: configured for UDMA/133
- [ 7.936295] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 7.936297] ata3.00: configured for UDMA/133
- [ 7.936595] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
- [ 7.937053] sd 1:0:0:0: [sdb] 2930275055 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 7.937074] sd 1:0:0:0: [sdb] Write Protect is off
- [ 7.937076] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 7.937112] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.937920] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JS-55N 2E01 PQ: 0 ANSI: 5
- [ 7.938332] sd 4:0:0:0: [sdc] 488395055 512-byte logical blocks: (250 GB/233 GiB)
- [ 7.938352] sd 4:0:0:0: [sdc] Write Protect is off
- [ 7.938354] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 7.938389] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.956690] sdc: sdc1 sdc2
- [ 7.959762] sdb: sdb1 sdb2 sdb3
- [ 7.960389] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 7.960552] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 8.093398] usb 4-1: new low-speed USB device number 2 using ohci-pci
- [ 8.191696] random: fast init done
- [ 8.287765] usb 4-1: New USB device found, idVendor=1ea7, idProduct=0002, bcdDevice= 2.00
- [ 8.287769] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 8.287770] usb 4-1: Product: Trust Wireless Mouse
- [ 8.296535] hidraw: raw HID events driver (C) Jiri Kosina
- [ 8.314423] usbcore: registered new interface driver usbhid
- [ 8.314425] usbhid: USB HID core driver
- [ 8.319838] input: Trust Wireless Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/0003:1EA7:0002.0001/input/input3
- [ 8.373515] hid-generic 0003:1EA7:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [Trust Wireless Mouse] on usb-0000:00:13.2-1/input0
- [ 8.374365] input: Trust Wireless Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/0003:1EA7:0002.0002/input/input4
- [ 8.374411] input: Trust Wireless Mouse Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/0003:1EA7:0002.0002/input/input5
- [ 8.374474] input: Trust Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/0003:1EA7:0002.0002/input/input6
- [ 8.430114] input: Trust Wireless Mouse System Control as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/0003:1EA7:0002.0002/input/input7
- [ 8.430291] hid-generic 0003:1EA7:0002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Trust Wireless Mouse] on usb-0000:00:13.2-1/input1
- [ 8.774859] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 150 PMAP PQ: 0 ANSI: 0 CCS
- [ 8.778220] sd 6:0:0:0: [sdd] 63037440 512-byte logical blocks: (32.3 GB/30.1 GiB)
- [ 8.778826] sd 6:0:0:0: [sdd] Write Protect is off
- [ 8.778829] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
- [ 8.779451] sd 6:0:0:0: [sdd] No Caching mode page found
- [ 8.779471] sd 6:0:0:0: [sdd] Assuming drive cache: write through
- [ 8.791994] sdd: sdd1 sdd2 sdd3
- [ 8.794713] sd 6:0:0:0: [sdd] Attached SCSI removable disk
- [ 9.220499] ntfs: driver 2.1.32 [Flags: R/W MODULE].
- [ 9.527816] ntfs: volume version 3.1.
- [ 9.531309] ntfs: (device sdd3): load_system_files(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
- [ 9.597010] random: crng init done
- [ 9.660360] ISO 9660 Extensions: RRIP_1991A
- [ 9.795263] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 9.826445] overlayfs: fs on '/run/archiso/sfs/airootfs' does not support file handles, falling back to index=off,nfs_export=off.
- [ 10.890862] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 10.891054] systemd[1]: Detected architecture x86-64.
- [ 10.905170] systemd[1]: Set hostname to <archiso>.
- [ 10.906930] systemd[1]: Initializing machine ID from random generator.
- [ 11.310481] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 11.310799] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 11.311508] systemd[1]: Listening on Journal Audit Socket.
- [ 11.311617] systemd[1]: Reached target Remote File Systems.
- [ 11.311980] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 11.312154] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 11.547431] audit: type=1130 audit(1575921947.086:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.548772] audit: type=1130 audit(1575921947.086:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.553645] audit: type=1130 audit(1575921947.093:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.562107] audit: type=1130 audit(1575921947.099:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.623964] audit: type=1130 audit(1575921947.163:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.632304] audit: type=1130 audit(1575921947.169:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.649370] systemd-journald[257]: Received request to flush runtime journal from PID 1
- [ 11.664841] audit: type=1130 audit(1575921947.203:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.673920] audit: type=1130 audit(1575921947.213:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 11.724449] audit: type=1130 audit(1575921947.263:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 12.088385] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 12.088462] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
- [ 12.130444] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
- [ 12.213919] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 12.275300] mousedev: PS/2 mouse device common for all mice
- [ 12.349271] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 12.349301] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 12.403917] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 12.866380] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
- [ 12.866385] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 12.866387] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 12.866389] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0
- [ 12.866391] snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0
- [ 12.866392] snd_hda_codec_realtek hdaudioC0D3: inputs:
- [ 12.866395] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18
- [ 12.866397] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19
- [ 12.866398] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a
- [ 12.866400] snd_hda_codec_realtek hdaudioC0D3: CD=0x1c
- [ 12.866402] snd_hda_codec_realtek hdaudioC0D3: dig-in=0x1f
- [ 12.906545] kvm: disabled by bios
- [ 12.909791] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
- [ 12.910884] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
- [ 12.910968] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
- [ 12.911079] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
- [ 12.911165] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
- [ 12.911241] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
- [ 12.911315] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
- [ 12.911400] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
- [ 12.947294] kvm: disabled by bios
- [ 13.134977] MCE: In-kernel MCE decoding enabled.
- [ 13.146665] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 13.146729] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 13.152480] powernow_k8: fid 0xe (2200 MHz), vid 0xc
- [ 13.152484] powernow_k8: fid 0xc (2000 MHz), vid 0xe
- [ 13.152485] powernow_k8: fid 0xa (1800 MHz), vid 0x10
- [ 13.152486] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
- [ 13.152633] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
- [ 15.157136] kauditd_printk_skb: 8 callbacks suppressed
- [ 15.157136] audit: type=1130 audit(1575921950.693:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 15.182095] audit: type=1130 audit(1575921950.719:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 15.203428] audit: type=1130 audit(1575921950.739:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 15.368078] 8021q: 802.1Q VLAN Support v1.8
- [ 15.514878] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 15.529835] audit: type=1130 audit(1575921951.066:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 15.531814] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 15.656738] r8169 0000:02:00.0 enp2s0: link down
- [ 15.656847] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 27.209673] audit: type=1130 audit(1575921962.746:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pacman-init comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 45.631510] audit: type=1130 audit(1575921981.169:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd@enp2s0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
- [ 45.652666] audit: type=1130 audit(1575921981.189:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 45.655191] audit: type=1130 audit(1575921981.193:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 45.780204] audit: type=1006 audit(1575921981.319:27): pid=501 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=1 res=1
- [ 45.801221] audit: type=1130 audit(1575921981.339:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 45.822374] audit: type=1006 audit(1575921981.359:29): pid=503 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
- [ 45.971191] audit: type=1130 audit(1575921981.509:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
- [ 236.903841] fuse init (API version 7.27)
- [ 307.831943] print_req_error: I/O error, dev fd0, sector 0
- [ 307.832645] floppy: error 10 while reading block 0
- [ 320.085233] print_req_error: I/O error, dev fd0, sector 0
- [ 320.085606] floppy: error 10 while reading block 0
- [ 336.302942] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement