SHARE
TWEET

Untitled

a guest Jul 26th, 2018 349 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    3.292163] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  2. [    3.297464] usb usb1: SerialNumber: xhci-hcd.0.auto
  3. [    3.298798] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
  4. [    3.298802] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  5. [    3.302313] ata1.00: configured for UDMA/133
  6. [    3.302629] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
  7. [    3.327657] hub 1-0:1.0: USB hub found
  8. [    3.331339] hub 1-0:1.0: 1 port detected
  9. [    3.335340] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  10. [    3.340744] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  11. [    3.348417] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  12. [    3.356517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  13. [    3.363219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  14. [    3.370422] usb usb2: Product: xHCI Host Controller
  15. [    3.375282] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  16. [    3.380576] usb usb2: SerialNumber: xhci-hcd.0.auto
  17. [    3.385648] hub 2-0:1.0: USB hub found
  18. [    3.389327] hub 2-0:1.0: 1 port detected
  19. [    3.393612] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  20. [    3.401817] clk: Not disabling unused clocks
  21. [    3.406005] ALSA device list:
  22. [    3.408953]   #0: DisplayPort monitor
  23. [    3.423071] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  24. [    3.430576] sd 0:0:0:0: [sda] Write Protect is off
  25. [    3.435333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  26. [    3.473157] sd 0:0:0:0: [sda] Attached SCSI disk
  27. [    3.477877] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  28. INIT: version 2.88 booting
  29. Starting udev
  30. [    3.593080] udevd[1621]: starting version 3.2
  31. [    3.597704] random: udevd: uninitialized urandom read (16 bytes read)
  32. [    3.604132] random: udevd: uninitialized urandom read (16 bytes read)
  33. [    3.610544] random: udevd: uninitialized urandom read (16 bytes read)
  34. [    3.616936] random: udevd: uninitialized urandom read (16 bytes read)
  35. [    3.626966] udevd[1622]: starting eudev-3.2
  36. [    3.670516] random: udevd: uninitialized urandom read (16 bytes read)
  37. [    3.680717] random: udevd: uninitialized urandom read (16 bytes read)
  38. [    3.706109] dsaxidma: loading out-of-tree module taints kernel.
  39. [    3.713245] <dma1> init: registered
  40. [    3.723934] <dma2> init: registered
  41. [    4.166628] EXT4-fs (sda): recovery complete
  42. [    4.190532] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
  43. Populating dev cache
  44. [    4.445767] random: dd: uninitialized urandom read (512 bytes read)
  45. Thu Jul 26 08:51:43 UTC 2018
  46. Starting internet superserver: inetd.
  47. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  48. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  49. INIT: Entering runlevel: 5
  50. Hello World
  51. [22]:0x12
  52. [20]:0x201
  53. [20]:0x201
  54. [22]:0x1
  55. [0]:0x140
  56. [0]:0x140
  57. Configuring network interfaces... [    4.744900] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  58. done.
  59. Starting Dropbear SSH server: [    4.773180] random: dropbearkey: uninitialized urandom read (32 bytes read)
  60. [    4.783309] random: dropbearkey: uninitialized urandom read (32 bytes read)
  61. Generating key, this may take a while...
  62. [    5.778887] macb ff0c0000.ethernet eth0: link up (1000/Full)
  63. [    5.784486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  64. [    6.407416] random: dropbearkey: uninitialized urandom read (32 bytes read)
  65. Public key portion is:
  66. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCK0naj+0UCnif/2VopBaVwF/+I1yLTEQdoUz7AqwrFWlHGIq+DgAbmG8CPupqYoybMm0N4ALyqtz292O4HQ+t171v/DME+gXeXcJI/pwc35GY5VDQ5DskkbhS2hAz96PbNEZO1weDrvOMtaGK3Bh7rsdVKjJnx2H5YcOPvQui2Fqo0ukoRzE/WGrTzUI6Ethcl91qYPg1eBlQR3noAgkYQ0vptDvc2a8Rl28TcRaliyCLouVjr4GHydj+u5OlJ6xDCCuUPalVeVhariJc8IWWxKfXUfYSqmZ2l1QPTH8LptJgIWH27NwaOJUH9bRF0iQM/FnzvVHfBVRs1mqwSXc2h root@VP88x_2017_3_PRJ0191
  67. Fingerprint: md5 30:f0:eb:f9:63:02:ef:66:70:2c:7e:26:59:59:33:7f
  68. dropbear.
  69. Starting syslogd/klogd: done
  70. [    6.461511] random: fast init done
  71. [    6.752986] random: crng init done
  72. [    8.676188] jffs2: notice: (2106) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  73. hello world.....
  74. Starting tcf-agent: OK
  75.  
  76. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
  77. root@VP88x_2017_3_PRJ0191:~# ls /mnt
  78. lost+found  xxx
  79. root@VP88x_2017_3_PRJ0191:~# cat /mnt/xxx
  80. dfsdsdf
  81. root@VP88x_2017_3_PRJ0191:~# mkfs.
  82. mkfs.ext2     mkfs.ext4     mkfs.jffs2
  83. mkfs.ext3     mkfs.ext4dev  mkfs.vfat
  84. root@VP88x_2017_3_PRJ0191:~# mkfs.
  85. mkfs.ext2     mkfs.ext4     mkfs.jffs2
  86. mkfs.ext3     mkfs.ext4dev  mkfs.vfat
  87. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat --help
  88. BusyBox v1.24.1 (2018-05-24 10:33:04 MDT) multi-call binary.
  89.  
  90. Usage: mkfs.vfat [-v] [-n LABEL] BLOCKDEV [KBYTES]
  91.  
  92. Make a FAT32 filesystem
  93.  
  94.         -v      Verbose
  95.         -n LBL  Volume label
  96. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
  97. [   97.394817] JBD2: Spotted dirty metadata buffer (dev = sda, blocknr = 1). There's a risk of filesystem corruption in case of system crash.
  98. ^C
  99. root@VP88x_2017_3_PRJ0191:~# umount /de[  100.882849] EXT4-fs error (device sda): ext4_map_blocks:568: inode #8: block 30441521: comm jbd2/sda-8: lblock 49 mapped to illegal pblock (length 1)
  100. v[  100.943404] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
  101. [  100.950369] Aborting journal on device sda-8.
  102. /[  101.163456] EXT4-fs error (device sda): ext4_journal_check_start:56: Detected aborted journal
  103. [  101.171900] EXT4-fs (sda): Remounting filesystem read-only
  104. sda
  105. [  102.660635] EXT4-fs error (device sda): ext4_put_super:840: Couldn't clean up the journal
  106. root@VP88x_2017_3_PRJ0191:~#
  107. root@VP88x_2017_3_PRJ0191:~#
  108. root@VP88x_2017_3_PRJ0191:~#
  109. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
  110. root@VP88x_2017_3_PRJ0191:~# [  117.462911]  sda:
  111.  
  112. root@VP88x_2017_3_PRJ0191:~#
  113. root@VP88x_2017_3_PRJ0191:~#
  114. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
  115. root@VP88x_2017_3_PRJ0191:~# vi /mnt/xxx
  116.  
  117.  
  118.  
  119.  
  120.  
  121.  
  122.  
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.  
  136.  
  137.  
  138.  
  139.  
  140.  
  141. sdfsdsdf`:wq
  142.  
  143. ~
  144. ~
  145. ~
  146. ~
  147. ~
  148. ~
  149. ~
  150. ~
  151. ~
  152. ~
  153. ~
  154. ~
  155. ~
  156. ~
  157. ~
  158. ~
  159. ~
  160. ~
  161. ~
  162. ~
  163. ~
  164.                                                                                 re's a risk of filesystem corruption in case of system crash.
  165. ^C
  166. root@VP88x_2017_3_PRJ0191:~# umount /de[  100.882849] EXT4-fs error (device sda): ext4_map_blocks:568: inode #8: block 30441521: comm jbd2/sda-8: lblock 49 mapped to illegal pblock (length 1)
  167. v[  100.943404] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
  168. [  100.950369] Aborting journal on device sda-8.
  169. /[  101.163456] EXT4-fs error (device sda): ext4_journal_check_start:56: Detected aborted journal
  170. [  101.171900] EXT4-fs (sda): Remounting filesystem read-only
  171. sda
  172. [  102.660635] EXT4-fs error (device sda): ext4_put_super:840: Couldn't clean up the journal
  173. root@VP88x_2017_3_PRJ0191:~#
  174. root@VP88x_2017_3_PRJ0191:~#
  175. root@VP88x_2017_3_PRJ0191:~#
  176. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
  177. root@VP88x_2017_3_PRJ0191:~# [  117.462911]  sda:
  178.  
  179. root@VP88x_2017_3_PRJ0191:~#
  180. root@VP88x_2017_3_PRJ0191:~#
  181. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
  182. root@VP88x_2017_3_PRJ0191:~# vi /mnt/xxx
  183. root@VP88x_2017_3_PRJ0191:~# sync
  184. root@VP88x_2017_3_PRJ0191:~# Xilinx Zynq MP First Stage Boot Loader
  185. Release 2017.3   May 24 2018  -  10:35:53
  186. Marvell PHY reset
  187. SI5338 0x70 not configured
  188. SI5338 0x70 configuration finished
  189. SI5338 0x71 not configured
  190. SI5338 0x71 configuration finished
  191.  
  192.  
  193. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  194.  
  195. I2C:   ready
  196. DRAM:  2 GiB
  197. EL Level:       EL2
  198. Chip ID:        xczu3eg
  199. MMC:   Card did not respond to voltage select!
  200. sdhci@ff160000 - probe failed: -95
  201. Card did not respond to voltage select!
  202.  
  203. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  204. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  205. *** Warning - bad CRC, using default environment
  206.  
  207. In:    serial
  208. Out:   serial
  209. Err:   serial
  210. Bootmode: QSPI_MODE
  211. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  212. eth0: ethernet@ff0c0000
  213. U-BOOT for VP88x_2017_3_PRJ0191
  214.  
  215. Hit any key to stop autoboot:  0
  216. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  217. device 0 offset 0x540000, size 0x2200000
  218. SF: 35651584 bytes @ 0x540000 Read: OK
  219. ## Loading kernel from FIT Image at 10000000 ...
  220.    Using 'conf@1' configuration
  221.    Trying 'kernel@0' kernel subimage
  222.      Description:  Linux Kernel
  223.      Type:         Kernel Image
  224.      Compression:  uncompressed
  225.      Data Start:   0x100000d8
  226.      Data Size:    12503552 Bytes = 11.9 MiB
  227.      Architecture: AArch64
  228.      OS:           Linux
  229.      Load Address: 0x00080000
  230.      Entry Point:  0x00080000
  231.      Hash algo:    sha1
  232.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  233.    Verifying Hash Integrity ... sha1+ OK
  234. ## Loading ramdisk from FIT Image at 10000000 ...
  235.    Using 'conf@1' configuration
  236.    Trying 'ramdisk@0' ramdisk subimage
  237.      Description:  ramdisk
  238.      Type:         RAMDisk Image
  239.      Compression:  uncompressed
  240.      Data Start:   0x10bf54e4
  241.      Data Size:    8973721 Bytes = 8.6 MiB
  242.      Architecture: AArch64
  243.      OS:           Linux
  244.      Load Address: unavailable
  245.      Entry Point:  unavailable
  246.      Hash algo:    sha1
  247.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  248.    Verifying Hash Integrity ... sha1+ OK
  249. ## Loading fdt from FIT Image at 10000000 ...
  250.    Using 'conf@1' configuration
  251.    Trying 'fdt@0' fdt subimage
  252.      Description:  Flattened Device Tree blob
  253.      Type:         Flat Device Tree
  254.      Compression:  uncompressed
  255.      Data Start:   0x10becbd0
  256.      Data Size:    34910 Bytes = 34.1 KiB
  257.      Architecture: AArch64
  258.      Hash algo:    sha1
  259.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  260.    Verifying Hash Integrity ... sha1+ OK
  261.    Booting using the fdt blob at 0x10becbd0
  262.    Loading Kernel Image ... OK
  263.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  264.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  265.  
  266. Starting kernel ...
  267.  
  268. [    0.000000] Booting Linux on physical CPU 0x0
  269. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  270. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  271. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  272. [    0.000000] bootconsole [cdns0] enabled
  273. [    0.000000] efi: Getting EFI parameters from FDT:
  274. [    0.000000] efi: UEFI not found.
  275. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  276. [    0.000000] psci: probing for conduit method from DT.
  277. [    0.000000] psci: PSCIv1.0 detected in firmware.
  278. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  279. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  280. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  281. [    0.000000] Detected VIPT I-cache on CPU0
  282. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  283. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  284. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  285. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  286. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  287. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  288. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  289. [    0.000000] Virtual kernel memory layout:
  290. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  291. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  292. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  293. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  294. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  295. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  296. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  297. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  298. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  299. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  300. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  301. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  302. [    0.000000] Hierarchical RCU implementation.
  303. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  304. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  305. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  306. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  307. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  308. [    0.000000] GIC: Using split EOI/Deactivate mode
  309. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  310. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  311. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  312. [    0.008257] Console: colour dummy device 80x25
  313. [    0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  314. [    0.022886] pid_max: default: 32768 minimum: 301
  315. [    0.027579] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  316. [    0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  317. [    0.041862] ASID allocator initialised with 65536 entries
  318. [    0.047562] zynqmp_plat_init Power management API v0.3
  319. [    0.052576] EFI services will not be available.
  320. [    0.057342] Detected VIPT I-cache on CPU1
  321. [    0.057378] CPU1: Booted secondary processor [410fd034]
  322. [    0.057639] Detected VIPT I-cache on CPU2
  323. [    0.057655] CPU2: Booted secondary processor [410fd034]
  324. [    0.057906] Detected VIPT I-cache on CPU3
  325. [    0.057922] CPU3: Booted secondary processor [410fd034]
  326. [    0.057954] Brought up 4 CPUs
  327. [    0.088237] SMP: Total of 4 processors activated.
  328. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  329. [    0.098709] CPU: All CPU(s) started at EL2
  330. [    0.102782] alternatives: patching kernel code
  331. [    0.108041] devtmpfs: initialized
  332. [    0.115580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  333. [    0.136569] xor: measuring software checksum speed
  334. [    0.181237]    8regs     :  2543.000 MB/sec
  335. [    0.221262]    8regs_prefetch:  2266.000 MB/sec
  336. [    0.265629]    32regs    :  3125.000 MB/sec
  337. [    0.305657]    32regs_prefetch:  2627.000 MB/sec
  338. [    0.310078] xor: using function: 32regs (3125.000 MB/sec)
  339. [    0.315530] pinctrl core: initialized pinctrl subsystem
  340. [    0.321212] NET: Registered protocol family 16
  341. [    0.326344] Failed to initialise IOMMU /amba/smmu@fd800000
  342. [    0.331844] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  343. [    0.339048] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  344. [    0.374401] DMA: preallocated 65536 KiB pool for atomic allocations
  345. [    0.390743] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  346. [    0.398217] ARM CCI_400_r1 PMU driver probed[    0.404998] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  347. [    0.431711] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  348. [    0.504820] raid6: int64x1  gen()   447 MB/s
  349. [    0.576873] raid6: int64x1  xor()   485 MB/s
  350. [    0.648969] raid6: int64x2  gen()   741 MB/s
  351. [    0.720964] raid6: int64x2  xor()   661 MB/s
  352. [    0.793014] raid6: int64x4  gen()  1086 MB/s
  353. [    0.865040] raid6: int64x4  xor()   816 MB/s
  354. [    0.937076] raid6: int64x8  gen()  1265 MB/s
  355. [    1.009113] raid6: int64x8  xor()   824 MB/s
  356. [    1.081217] raid6: neonx1   gen()   797 MB/s
  357. [    1.153196] raid6: neonx1   xor()   837 MB/s
  358. [    1.225264] raid6: neonx2   gen()  1286 MB/s
  359. [    1.297300] raid6: neonx2   xor()  1143 MB/s
  360. [    1.369331] raid6: neonx4   gen()  1663 MB/s
  361. [    1.441368] raid6: neonx4   xor()  1306 MB/s
  362. [    1.513436] raid6: neonx8   gen()  1752 MB/s
  363. [    1.585448] raid6: neonx8   xor()  1348 MB/s
  364. [    1.589525] raid6: using algorithm neonx8 gen() 1752 MB/s
  365. [    1.594887] raid6: .... xor() 1348 MB/s, rmw enabled
  366. [    1.599818] raid6: using intx1 recovery algorithm
  367. [    1.604981] Write failed gate address:1000f02
  368. [    1.612937] SCSI subsystem initialized
  369. [    1.616718] usbcore: registered new interface driver usbfs
  370. [    1.622040] usbcore: registered new interface driver hub
  371. [    1.627329] usbcore: registered new device driver usb
  372. [    1.632368] media: Linux media interface: v0.10
  373. [    1.636820] Linux video capture interface: v2.00
  374. [    1.641408] pps_core: LinuxPPS API ver. 1 registered
  375. [    1.646313] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  376. [    1.655406] PTP clock support registered
  377. [    1.659305] EDAC MC: Ver: 3.0.0
  378. [    1.662665] FPGA manager framework
  379. [    1.666005] fpga-region fpga-full: FPGA Region probed
  380. [    1.671059] Advanced Linux Sound Architecture Driver Initialized.
  381. [    1.677267] Bluetooth: Core ver 2.22
  382. [    1.680676] NET: Registered protocol family 31
  383. [    1.685066] Bluetooth: HCI device and connection manager initialized
  384. [    1.691384] Bluetooth: HCI socket layer initialized
  385. [    1.696226] Bluetooth: L2CAP socket layer initialized
  386. [    1.701251] Bluetooth: SCO socket layer initialized
  387. [    1.706666] clocksource: Switched to clocksource arch_sys_counter
  388. [    1.712684] VFS: Disk quotas dquot_6.6.0
  389. [    1.716501] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  390. [    1.727921] NET: Registered protocol family 2
  391. [    1.732464] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  392. [    1.739580] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  393. [    1.746358] TCP: Hash tables configured (established 16384 bind 16384)
  394. [    1.752749] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  395. [    1.758688] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  396. [    1.765192] NET: Registered protocol family 1
  397. [    1.769699] RPC: Registered named UNIX socket transport module.
  398. [    1.775481] RPC: Registered udp transport module.
  399. [    1.780095] RPC: Registered tcp transport module.
  400. [    1.784766] RPC: Registered tcp NFSv4.1 backchannel transport module.
  401. [    1.791309] Trying to unpack rootfs image as initramfs...
  402. [    2.114291] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  403. [    2.121720] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  404. [    2.129943] futex hash table entries: 1024 (order: 5, 131072 bytes)
  405. [    2.136585] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  406. [    2.143509] NFS: Registering the id_resolver key type
  407. [    2.148389] Key type id_resolver registered
  408. [    2.152520] Key type id_legacy registered
  409. [    2.156504] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  410. [    2.163175] ntfs: driver 2.1.32 [Flags: R/W].
  411. [    2.167503] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  412. [    2.182316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  413. [    2.189553] io scheduler noop registered
  414. [    2.193410] io scheduler deadline registered
  415. [    2.197653] io scheduler cfq registered (default)
  416. [    2.202922] nwl-pcie fd0e0000.pcie: Link is UP
  417. [    2.207218] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  418. [    2.212820] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  419. [    2.218687] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  420. [    2.224912] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  421. [    2.230973] pci_bus 0000:00: root bus resource [bus 00-ff]
  422. [    2.236419] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  423. [    2.243256] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  424. [    2.251182] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  425. [    2.257779] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  426. [    2.264528] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  427. [    2.269714] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  428. [    2.277178] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  429. [    2.283552] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  430. [    2.290604] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  431. [    2.297758] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  432. [    2.304617] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  433. [    2.311535] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  434. [    2.318459] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  435. [    2.325380] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  436. [    2.332297] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  437. [    2.339220] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  438. [    2.346138] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  439. [    2.353096] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  440. [    2.359981] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  441. [    2.366897] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  442. [    2.373819] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  443. [    2.380739] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  444. [    2.387660] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  445. [    2.394578] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  446. [    2.401501] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  447. [    2.429741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  448. [    2.437219] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  449. [    2.446299] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªª¢²êconsole [ttyPS0] enabled
  450. [    2.455246] console [ttyPS0] enabled
  451. [    2.462210] bootconsole [cdns0] disabled
  452. [    2.462210] bootconsole [cdns0] disabled
  453. [    2.470280] Unable to detect cache hierarchy from DT for CPU 0
  454. [    2.480634] brd: module loaded
  455. [    2.486419] loop: module loaded
  456. [    2.490385] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  457. [    2.499263] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  458. [    2.509995] scsi host0: ahci-ceva
  459. [    2.513409] scsi host1: ahci-ceva
  460. [    2.516748] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  461. [    2.524576] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  462. [    2.532620] mtdoops: mtd device (mtddev=name/number) must be supplied
  463. [    2.539975] zynqmp-qspi ff0f0000.spi: rx bus width not found
  464. [    2.545908] m25p80 spi0.0: found n25q00, expected n25q512a
  465. [    2.551632] m25p80 spi0.0: n25q00 (131072 Kbytes)
  466. [    2.556271] 5 ofpart partitions found on MTD device spi0.0
  467. [    2.561716] Creating 5 MTD partitions on "spi0.0":
  468. [    2.566492] 0x000000000000-0x000000500000 : "boot"
  469. [    2.571735] 0x000000500000-0x000000540000 : "bootenv"
  470. [    2.577122] 0x000000540000-0x000002740000 : "kernel"
  471. [    2.582402] 0x000002740000-0x000003740000 : "user"
  472. [    2.587510] 0x000003740000-0x000003750000 : "test"
  473. [    2.593504] libphy: Fixed MDIO Bus: probed
  474. [    2.598633] tun: Universal TUN/TAP device driver, 1.6
  475. [    2.603600] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  476. [    2.609871] CAN device driver interface
  477. [    2.614190] macb ff0c0000.ethernet: Not enabling partial store and forward
  478. [    2.621484] libphy: MACB_mii_bus: probed
  479. [    2.698939] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  480. [    2.708683] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  481. [    2.721274] usbcore: registered new interface driver asix
  482. [    2.726640] usbcore: registered new interface driver ax88179_178a
  483. [    2.732685] usbcore: registered new interface driver cdc_ether
  484. [    2.738500] usbcore: registered new interface driver net1080
  485. [    2.744142] usbcore: registered new interface driver cdc_subset
  486. [    2.750043] usbcore: registered new interface driver zaurus
  487. [    2.755612] usbcore: registered new interface driver cdc_ncm
  488. [    2.761568] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  489. [    2.768007] ehci-pci: EHCI PCI platform driver
  490. [    2.772663] usbcore: registered new interface driver uas
  491. [    2.777927] usbcore: registered new interface driver usb-storage
  492. [    2.784181] mousedev: PS/2 mouse device common for all mice
  493. [    2.790074] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  494. [    2.797246] i2c /dev entries driver
  495. [    2.800875] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  496. [    2.806922] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  497. [    2.813688] usbcore: registered new interface driver uvcvideo
  498. [    2.819350] USB Video Class driver (1.1.1)
  499. [    2.823789] Bluetooth: HCI UART driver ver 2.3
  500. [    2.828154] Bluetooth: HCI UART protocol H4 registered
  501. [    2.833270] Bluetooth: HCI UART protocol BCSP registered
  502. [    2.838565] Bluetooth: HCI UART protocol LL registered
  503. [    2.843685] Bluetooth: HCI UART protocol ATH3K registered
  504. [    2.849067] Bluetooth: HCI UART protocol Three-wire (H5) registered
  505. [    2.852871] ata2: SATA link down (SStatus 0 SControl 330)
  506. [    2.860734] Bluetooth: HCI UART protocol Intel registered
  507. [    2.866115] Bluetooth: HCI UART protocol Broadcom registered
  508. [    2.871723] Bluetooth: HCI UART protocol QCA registered
  509. [    2.876962] usbcore: registered new interface driver bcm203x
  510. [    2.882606] usbcore: registered new interface driver bpa10x
  511. [    2.888159] usbcore: registered new interface driver bfusb
  512. [    2.893627] usbcore: registered new interface driver btusb
  513. [    2.899065] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  514. [    2.904758] usbcore: registered new interface driver ath3k
  515. [    2.910298] EDAC MC: ECC not enabled
  516. [    2.913923] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  517. [    2.922959] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  518. [    2.935256] sdhci: Secure Digital Host Controller Interface driver
  519. [    2.941353] sdhci: Copyright(c) Pierre Ossman
  520. [    2.945692] sdhci-pltfm: SDHCI platform and OF driver helper
  521. [    2.998677] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  522. [    3.006786] ledtrig-cpu: registered to indicate activity on CPUs
  523. [    3.012855] usbcore: registered new interface driver usbhid
  524. [    3.018338] usbhid: USB HID core driver
  525. [    3.023725] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  526. [    3.030582] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  527. [    3.037752] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  528. [    3.045101] PLL: shutdown
  529. [    3.048525] Write failed to divider address:fd1a007c
  530. [    3.053561] PLL: enable
  531. [    3.056088] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  532. [    3.064108] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  533. [    3.073779] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  534. [    3.083635] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  535. [    3.091075] pktgen: Packet Generator for packet performance testing. Version: 2.75
  536. [    3.101547] Netfilter messages via NETLINK v0.30.
  537. [    3.106284] ip_tables: (C) 2000-2006 Netfilter Core Team
  538. [    3.111561] Initializing XFRM netlink socket
  539. [    3.116809] NET: Registered protocol family 10
  540. [    3.121640] ip6_tables: (C) 2000-2006 Netfilter Core Team
  541. [    3.126995] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  542. [    3.133211] NET: Registered protocol family 17
  543. [    3.137578] NET: Registered protocol family 15
  544. [    3.142003] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  545. [    3.154927] Ebtables v2.0 registered
  546. [    3.158539] can: controller area network core (rev 20120528 abi 9)
  547. [    3.164683] NET: Registered protocol family 29
  548. [    3.169074] can: raw protocol (rev 20120528)
  549. [    3.173325] can: broadcast manager protocol (rev 20161123 t)
  550. [    3.178970] can: netlink gateway (rev 20130117) max_hops=1
  551. [    3.184936] Bluetooth: RFCOMM TTY layer initialized
  552. [    3.189729] Bluetooth: RFCOMM socket layer initialized
  553. [    3.194852] Bluetooth: RFCOMM ver 1.11
  554. [    3.198574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  555. [    3.203872] Bluetooth: BNEP filters: protocol multicast
  556. [    3.209082] Bluetooth: BNEP socket layer initialized
  557. [    3.214026] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  558. [    3.219931] Bluetooth: HIDP socket layer initialized
  559. [    3.225056] 9pnet: Installing 9P2000 support
  560. [    3.229261] Key type dns_resolver registered
  561. [    3.233917] registered taskstats version 1
  562. [    3.238309] Btrfs loaded, crc32c=crc32c-generic
  563. [    3.249905] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  564. [    3.255328] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  565. [    3.263198] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  566. [    3.271852] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  567. [    3.277923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  568. [    3.284629] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  569. [    3.291828] usb usb1: Product: xHCI Host Controller
  570. [    3.296686] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  571. [    3.301980] usb usb1: SerialNumber: xhci-hcd.0.auto
  572. [    3.307145] hub 1-0:1.0: USB hub found
  573. [    3.310828] hub 1-0:1.0: 1 port detected
  574. [    3.314827] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  575. [    3.320233] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  576. [    3.327901] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  577. [    3.336004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  578. [    3.342710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  579. [    3.349912] usb usb2: Product: xHCI Host Controller
  580. [    3.354772] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  581. [    3.360067] usb usb2: SerialNumber: xhci-hcd.0.auto
  582. [    3.365138] hub 2-0:1.0: USB hub found
  583. [    3.368814] hub 2-0:1.0: 1 port detected
  584. [    3.373093] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  585. [    3.381298] clk: Not disabling unused clocks
  586. [    3.385486] ALSA device list:
  587. [    3.388434]   #0: DisplayPort monitor
  588. [    4.658687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  589. [    4.687955] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
  590. [    4.693789] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  591. [    4.729261] ata1.00: configured for UDMA/133
  592. [    4.733726] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
  593. [    4.775040] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  594. [    4.782534] sd 0:0:0:0: [sda] Write Protect is off
  595. [    4.787287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  596. [    4.946053]  sda: sda1
  597. [    4.948837] sd 0:0:0:0: [sda] Attached SCSI disk
  598. [    4.953561] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  599. INIT: version 2.88 booting
  600. Starting udev
  601. [    5.068836] udevd[1623]: starting version 3.2
  602. [    5.073460] random: udevd: uninitialized urandom read (16 bytes read)
  603. [    5.080037] random: udevd: uninitialized urandom read (16 bytes read)
  604. [    5.086451] random: udevd: uninitialized urandom read (16 bytes read)
  605. [    5.092847] random: udevd: uninitialized urandom read (16 bytes read)
  606. [    5.102888] udevd[1624]: starting eudev-3.2
  607. [    5.146147] random: udevd: uninitialized urandom read (16 bytes read)
  608. [    5.156006] random: udevd: uninitialized urandom read (16 bytes read)
  609. [    5.165665] 4fm: loading out-of-tree module taints kernel.
  610. [    5.175394] pci 0000:00:00.0: enabling device (0000 -> 0002)
  611. [    5.181089] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  612. [    5.186717] Accessing 47232 of total 1 entries in dev->bar
  613. [    5.192195] dev->bar[u].virt_address:cf3d07c value:38011121
  614. [    5.193360] <dma1> init: registered
  615. [    5.201195] dev->bar[u].virt_address:cf3d080 value:deadbeef
  616. [    5.206726] dev->bar[u].virt_address:cf3d084 value:baadf00d
  617. [    5.212291] dev->bar[u].virt_address:cf3d088 value:eba00eba
  618. [    5.217846] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  619. [    5.229665] <dma2> init: registered
  620. [    5.239185] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  621. Populating dev cache
  622. [    5.906872] random: dd: uninitialized urandom read (512 bytes read)
  623. Thu Jul 26 08:51:43 UTC 2018
  624. Starting internet superserver: inetd.
  625. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  626. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  627. INIT: Entering runlevel: 5
  628. Hello World
  629. [22]:0x12
  630. [20]:0x201
  631. [20]:0x201
  632. [22]:0x1
  633. [0]:0x140
  634. [0]:0x140
  635. Configuring network interfaces... [    6.205172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  636. done.
  637. Starting Dropbear SSH server: [    6.233858] random: dropbearkey: uninitialized urandom read (32 bytes read)
  638. [    6.243920] random: dropbearkey: uninitialized urandom read (32 bytes read)
  639. Generating key, this may take a while...
  640. [    7.218783] macb ff0c0000.ethernet eth0: link up (1000/Full)
  641. [    7.224389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  642. [   15.776876] random: dropbearkey: uninitialized urandom read (32 bytes read)
  643. Public key portion is:
  644. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCx0xQijgYgMJX7gep1syG+VgOkT386ruyJttgLOIyUHbCP1GM+Ppz7mFU8Prtb/CIS77XEPbGUsJ6VtXvUWJ8oaRbfKSANsQjMUv0mlcvEClw9dGI44jGisIU8QMXin+IIq9BHpOyQyy/bfMgbGElT9c/ltzks3ma7p2X0NVcibhAC3pplS8AWH6HGeq3fmxPN3JswxicCxumb/mNSpQDIgmn2TeCCNuJqiIBlI8nnqxAujNgaAnmbVJTGOYrZLf7TBqfAWwzIgjXI4kmdfjp0sOHVRZH5BoNPH5rKg8GZN2zZYY5iQJf6O/lPBX4PVrcihjGKDxelq8h6AV326XhH root@VP88x_2017_3_PRJ0191
  645. Fingerprint: md5 fc:b5:9d:05:30:d4:9e:f5:59:89:2a:c8:fa:a[   15.829320] random: fast init done
  646. 5:44:e0
  647. dropbear.
  648. Starting syslogd/klogd: done
  649. [   16.183320] random: crng init done
  650. [   18.100550] jffs2: notice: (2136) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  651. hello world.....
  652. Starting tcf-agent: OK
  653.  
  654. root@VP88x_2017_3_PRJ0191:~# mount
  655. rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
  656. proc on /proc type proc (rw,relatime)
  657. sysfs on /sys type sysfs (rw,relatime)
  658. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  659. devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
  660. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
  661. tmpfs on /var/volatile type tmpfs (rw,relatime)
  662. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
  663. /dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
  664. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda
  665. sda   sda1
  666. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda
  667. sda   sda1
  668. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt2
  669. mount: mounting /dev/sda on /mnt2 failed: No such file or directory
  670. root@VP88x_2017_3_PRJ0191:~# mkdir /mnt2
  671. root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt2
  672. [   43.742405] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  673. root@VP88x_2017_3_PRJ0191:~# ls /mnt2
  674. xxx
  675. root@VP88x_2017_3_PRJ0191:~# cat /mnt2/xxx
  676. sdfsdsdf`:wq
  677.  
  678. root@VP88x_2017_3_PRJ0191:~# umount /dev/sda
  679. root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda
  680. sda   sda1
  681. root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda
  682. sda   sda1
  683. root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda1
  684. fsck (busybox 1.24.1, 2018-05-24 10:33:04 MDT)
  685. fsck: fsck.auto: No such file or directory
  686. root@VP88x_2017_3_PRJ0191:~#
  687. root@VP88x_2017_3_PRJ0191:~#
  688. root@VP88x_2017_3_PRJ0191:~#
  689. root@VP88x_2017_3_PRJ0191:~# chmod +x /tmp/*
  690. root@VP88x_2017_3_PRJ0191:~# cd /tmp
  691. root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
  692. enter number of cyclic (0 - for infinite)
  693. 1
  694. SPI1 result = 0  SUCCESS
  695. Opened device VP880. PCIe read from CID 0x2000: 2f70013
  696. PCIe result = 0  SUCCESS
  697.  
  698. --- AMS zynq PS System monitor---
  699. temperature ps 50.52C
  700. vcc_psintlp    0.87V
  701. vcc_psintfp    0.87V
  702. vcc_psaux      1.81V
  703. vcc_psddr_504  1.21V
  704. vcc_psio3_503  3.25V
  705. vcc_psio0_500  3.24V
  706. vcc_psio1_501  1.80V
  707. vcc_psio2_502  1.80V
  708. vcc_psmgtravcc 0.87V
  709. vcc_psmgtravtt 1.81V
  710. ---------------------------------
  711.  
  712. --- AMS zynq PL System monitor---
  713. temperature pl 48.54C
  714. vcc_int        0.87V
  715. vcc_aux        1.81V
  716. vcc_bram       0.87V
  717. vcc_psintlp    0.87V
  718. vcc_psintfp    0.87V
  719. vcc_psaux      1.81V
  720. vcc_vuser1     0.00V
  721. vcc_vuser2     0.00V
  722. vcc_vuser3     0.00V
  723. vcc_vuser4     0.00V
  724. ---------------------------------
  725. ranran.............temperature         27 C
  726. vmon_fmc_vadj       1.79V
  727. vmon_fmc_viob       1.79V
  728. vmon_sblast_vcore   1.64V
  729. vmon_sblast_vio     1.48V
  730. vmon_2v5_mgt_refclk 2.44V
  731. vmon_3v3_mgt_refclk 3.23V
  732. vmon_1v2            1.18V
  733. vmon_1v4            1.40V
  734. vmon_vaux           3.32V
  735. VPX_SYS_RST_N       :1
  736. PS_ERROR_STATUS     :1
  737. PS_ERROR_OUT        :1
  738. PS_INIT_B           :1
  739. PS_DONE             :1
  740. INIT_B              :1
  741. DONE                :1
  742. FLASH_A26           :1
  743. HSC_12V_PG          :1
  744. HSC_5V_PG           :1
  745. VPX_GAP             :1
  746. VPX_GA4             :1
  747. VPX_GA3             :1
  748. VPX_GA2             :1
  749. VPX_GA1             :1
  750. VPX_GA0             :1
  751. PG_LED_N            :1
  752. ZYNQ_CONFDONE_LED   :1
  753. FPGA_CONFDONE_LED   :1
  754. FMC_VADJ_VS0        :1
  755. FMC_VADJ_VS1        :1
  756. FMC_VADJ_VS2        :1
  757. VADJ_FMC_EN_L       :1
  758. FMC_BYPASS          :1
  759. HSC_ON              :1
  760. HSC_3V3_PG          :1
  761. PG_C2M_3V3          :1
  762. MGT_PG              :1
  763. DDR4_VTT_PG         :1
  764. DDR4_PG             :1
  765. PG_FPGA_CORE        :1
  766. 1V8_LOC_2V5_VPP_PG  :1
  767. HSC Source channel 1     3.250V
  768. HSC Source channel 2     5.031V
  769. HSC ADIN channel 1       0.425V
  770. HSC ADIN channel 2       0.423V
  771. HSC Sense channel 1      14.688mV
  772. HSC Current channel 1    2.938A
  773. HSC Sense channel 2      2.625mV
  774. HSC Current channel 2    0.875A
  775. HSC Power channel 1      9.547W
  776. HSC Power channel 2      4.402W
  777. ---------------------------------------------------
  778. HSC Source channel 1     2.500V
  779. HSC Source channel 2     11.906V
  780. HSC ADIN channel 1       0.423V
  781. HSC ADIN channel 2       0.421V
  782. HSC Sense channel 1      0.000mV
  783. HSC Current channel 1    0.000A
  784. HSC Sense channel 2      4.375mV
  785. HSC Current channel 2    0.875A
  786. HSC Power channel 1      0.000W
  787. HSC Power channel 2      10.418W
  788. ---------------------------------------------------
  789. HOSTIF version 1.0.0.5
  790. read fpga values
  791. temp_pl         44.919250
  792. vcc_int         0.958008
  793. vcc_aux         1.801758
  794. vcc_bram         0.958008
  795. vcc_vuser0         1.500000
  796. vcc_vuser1         1.186523
  797. vcc_vuser2         0.000000
  798. vcc_vuser3         0.000000
  799. MMC result =SUCCESS
  800. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  801.  
  802. --- 192.168.1.20 ping statistics ---
  803. 1 packets transmitted, 0 packets received, 100% packet loss
  804. Ethernet result = 256  FAILED
  805. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  806.  
  807. Global Units:
  808. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  809. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  810. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  811. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  812. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  813. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  814.  
  815.  
  816. Running 'VP880-FMC134' on PCIe, CID725
  817.  
  818. -----------------------------------------------------------
  819. Device 'VP880' (P0)
  820. -----------------------------------------------------------
  821. Constellation ID   : 759
  822. Number Of Stars    : 19
  823. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  824. Firmware Build Code: 0
  825. Firmware Revision  : 1.2
  826. -----------------------------------------------------------
  827.  
  828. FMC detected
  829. FMC result = 0  SUCCESS
  830. memory test: OK
  831. Memory result = 0  SUCCESS
  832. DISK: failed , no mount point
  833. DISK result = -1 FAILED
  834. FLASH: OK
  835. FLASH result = 0 SUCCESS
  836. read returned 9
  837. RFFE result = 0 SUCCESS
  838. root@VP88x_2017_3_PRJ0191:/tmp# mount
  839. rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
  840. proc on /proc type proc (rw,relatime)
  841. sysfs on /sys type sysfs (rw,relatime)
  842. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  843. devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
  844. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
  845. tmpfs on /var/volatile type tmpfs (rw,relatime)
  846. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
  847. /dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
  848. root@VP88x_2017_3_PRJ0191:/tmp# reboot
  849.  
  850. The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 á:57:1
  851. INIT: Sending processes the TERM signal
  852. root@VP88x_2017_3_PRJ0191:/tmp# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2123)
  853. dropbear.
  854. Stopping syslogd/klogd: stopped syslogd (pid 2131)
  855. stopped klogd (pid 2134)
  856. done
  857. Stopping tcf-agent: OK
  858. Deconfiguring network interfaces... done.
  859. Sending all processes the TERM signal...
  860. logout
  861. [  344.114693] macb ff0c0000.ethernet eth0: link down
  862. Sending all processes the KILL signal...
  863. Unmounting remote filesystems...
  864. Deactivating swap...
  865. Unmounting local filesystems...
  866. Rebooting... [  350.958765] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  867. êXilinx Zynq MP First Stage Boot Loader
  868. Release 2017.3   May 24 2018  -  10:35:53
  869. Marvell PHY reset
  870. SI5338 0x70 already configured
  871. SI5338 0x71 already configured
  872.  
  873.  
  874. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  875.  
  876. I2C:   ready
  877. DRAM:  2 GiB
  878. EL Level:       EL2
  879. Chip ID:        xczu3eg
  880. MMC:   Card did not respond to voltage select!
  881. sdhci@ff160000 - probe failed: -95
  882. Card did not respond to voltage select!
  883.  
  884. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  885. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  886. *** Warning - bad CRC, using default environment
  887.  
  888. In:    serial
  889. Out:   serial
  890. Err:   serial
  891. Bootmode: QSPI_MODE
  892. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  893. eth0: ethernet@ff0c0000
  894. U-BOOT for VP88x_2017_3_PRJ0191
  895.  
  896. Hit any key to stop autoboot:  0
  897. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  898. device 0 offset 0x540000, size 0x2200000
  899. SF: 35651584 bytes @ 0x540000 Read: OK
  900. ## Loading kernel from FIT Image at 10000000 ...
  901.    Using 'conf@1' configuration
  902.    Trying 'kernel@0' kernel subimage
  903.      Description:  Linux Kernel
  904.      Type:         Kernel Image
  905.      Compression:  uncompressed
  906.      Data Start:   0x100000d8
  907.      Data Size:    12503552 Bytes = 11.9 MiB
  908.      Architecture: AArch64
  909.      OS:           Linux
  910.      Load Address: 0x00080000
  911.      Entry Point:  0x00080000
  912.      Hash algo:    sha1
  913.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  914.    Verifying Hash Integrity ... sha1+ OK
  915. ## Loading ramdisk from FIT Image at 10000000 ...
  916.    Using 'conf@1' configuration
  917.    Trying 'ramdisk@0' ramdisk subimage
  918.      Description:  ramdisk
  919.      Type:         RAMDisk Image
  920.      Compression:  uncompressed
  921.      Data Start:   0x10bf54e4
  922.      Data Size:    8973721 Bytes = 8.6 MiB
  923.      Architecture: AArch64
  924.      OS:           Linux
  925.      Load Address: unavailable
  926.      Entry Point:  unavailable
  927.      Hash algo:    sha1
  928.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  929.    Verifying Hash Integrity ... sha1+ OK
  930. ## Loading fdt from FIT Image at 10000000 ...
  931.    Using 'conf@1' configuration
  932.    Trying 'fdt@0' fdt subimage
  933.      Description:  Flattened Device Tree blob
  934.      Type:         Flat Device Tree
  935.      Compression:  uncompressed
  936.      Data Start:   0x10becbd0
  937.      Data Size:    34910 Bytes = 34.1 KiB
  938.      Architecture: AArch64
  939.      Hash algo:    sha1
  940.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  941.    Verifying Hash Integrity ... sha1+ OK
  942.    Booting using the fdt blob at 0x10becbd0
  943.    Loading Kernel Image ... OK
  944.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  945.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  946.  
  947. Starting kernel ...
  948.  
  949. [    0.000000] Booting Linux on physical CPU 0x0
  950. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  951. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  952. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  953. [    0.000000] bootconsole [cdns0] enabled
  954. [    0.000000] efi: Getting EFI parameters from FDT:
  955. [    0.000000] efi: UEFI not found.
  956. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  957. [    0.000000] psci: probing for conduit method from DT.
  958. [    0.000000] psci: PSCIv1.0 detected in firmware.
  959. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  960. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  961. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  962. [    0.000000] Detected VIPT I-cache on CPU0
  963. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  964. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  965. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  966. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  967. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  968. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  969. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  970. [    0.000000] Virtual kernel memory layout:
  971. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  972. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  973. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  974. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  975. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  976. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  977. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  978. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  979. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  980. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  981. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  982. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  983. [    0.000000] Hierarchical RCU implementation.
  984. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  985. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  986. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  987. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  988. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  989. [    0.000000] GIC: Using split EOI/Deactivate mode
  990. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  991. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  992. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  993. [    0.008253] Console: colour dummy device 80x25
  994. [    0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  995. [    0.022878] pid_max: default: 32768 minimum: 301
  996. [    0.027570] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  997. [    0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  998. [    0.041859] ASID allocator initialised with 65536 entries
  999. [    0.047560] zynqmp_plat_init Power management API v0.3
  1000. [    0.052578] EFI services will not be available.
  1001. [    0.057341] Detected VIPT I-cache on CPU1
  1002. [    0.057376] CPU1: Booted secondary processor [410fd034]
  1003. [    0.057635] Detected VIPT I-cache on CPU2
  1004. [    0.057651] CPU2: Booted secondary processor [410fd034]
  1005. [    0.057899] Detected VIPT I-cache on CPU3
  1006. [    0.057915] CPU3: Booted secondary processor [410fd034]
  1007. [    0.057947] Brought up 4 CPUs
  1008. [    0.088228] SMP: Total of 4 processors activated.
  1009. [    0.092905] CPU features: detected feature: 32-bit EL0 Support
  1010. [    0.098701] CPU: All CPU(s) started at EL2
  1011. [    0.102775] alternatives: patching kernel code
  1012. [    0.108032] devtmpfs: initialized
  1013. [    0.115565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  1014. [    0.136576] xor: measuring software checksum speed
  1015. [    0.181246]    8regs     :  2543.000 MB/sec
  1016. [    0.221269]    8regs_prefetch:  2266.000 MB/sec
  1017. [    0.265638]    32regs    :  3125.000 MB/sec
  1018. [    0.305666]    32regs_prefetch:  2627.000 MB/sec
  1019. [    0.310087] xor: using function: 32regs (3125.000 MB/sec)
  1020. [    0.315539] pinctrl core: initialized pinctrl subsystem
  1021. [    0.321227] NET: Registered protocol family 16
  1022. [    0.326317] Failed to initialise IOMMU /amba/smmu@fd800000
  1023. [    0.331822] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  1024. [    0.339023] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  1025. [    0.374286] DMA: preallocated 65536 KiB pool for atomic allocations
  1026. [    0.390643] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  1027. [    0.398119] ARM CCI_400_r1 PMU driver probed[    0.404889] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  1028. [    0.431596] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  1029. [    0.504880] raid6: int64x1  gen()   447 MB/s
  1030. [    0.576893] raid6: int64x1  xor()   471 MB/s
  1031. [    0.648947] raid6: int64x2  gen()   741 MB/s
  1032. [    0.720997] raid6: int64x2  xor()   661 MB/s
  1033. [    0.793035] raid6: int64x4  gen()  1086 MB/s
  1034. [    0.865056] raid6: int64x4  xor()   816 MB/s
  1035. [    0.937106] raid6: int64x8  gen()  1265 MB/s
  1036. [    1.009172] raid6: int64x8  xor()   824 MB/s
  1037. [    1.081197] raid6: neonx1   gen()   796 MB/s
  1038. [    1.153226] raid6: neonx1   xor()   837 MB/s
  1039. [    1.225272] raid6: neonx2   gen()  1285 MB/s
  1040. [    1.297337] raid6: neonx2   xor()  1143 MB/s
  1041. [    1.369364] raid6: neonx4   gen()  1663 MB/s
  1042. [    1.441405] raid6: neonx4   xor()  1306 MB/s
  1043. [    1.513447] raid6: neonx8   gen()  1752 MB/s
  1044. [    1.585488] raid6: neonx8   xor()  1348 MB/s
  1045. [    1.589569] raid6: using algorithm neonx8 gen() 1752 MB/s
  1046. [    1.594931] raid6: .... xor() 1348 MB/s, rmw enabled
  1047. [    1.599862] raid6: using intx1 recovery algorithm
  1048. [    1.605023] Write failed gate address:1000f02
  1049. [    1.612888] SCSI subsystem initialized
  1050. [    1.616678] usbcore: registered new interface driver usbfs
  1051. [    1.622007] usbcore: registered new interface driver hub
  1052. [    1.627289] usbcore: registered new device driver usb
  1053. [    1.632336] media: Linux media interface: v0.10
  1054. [    1.636788] Linux video capture interface: v2.00
  1055. [    1.641374] pps_core: LinuxPPS API ver. 1 registered
  1056. [    1.646278] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1057. [    1.655373] PTP clock support registered
  1058. [    1.659273] EDAC MC: Ver: 3.0.0
  1059. [    1.662617] FPGA manager framework
  1060. [    1.665954] fpga-region fpga-full: FPGA Region probed
  1061. [    1.670962] Advanced Linux Sound Architecture Driver Initialized.
  1062. [    1.677212] Bluetooth: Core ver 2.22
  1063. [    1.680617] NET: Registered protocol family 31
  1064. [    1.685014] Bluetooth: HCI device and connection manager initialized
  1065. [    1.691332] Bluetooth: HCI socket layer initialized
  1066. [    1.696174] Bluetooth: L2CAP socket layer initialized
  1067. [    1.701208] Bluetooth: SCO socket layer initialized
  1068. [    1.706597] clocksource: Switched to clocksource arch_sys_counter
  1069. [    1.712598] VFS: Disk quotas dquot_6.6.0
  1070. [    1.716440] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1071. [    1.726718] NET: Registered protocol family 2
  1072. [    1.731267] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1073. [    1.738385] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  1074. [    1.745166] TCP: Hash tables configured (established 16384 bind 16384)
  1075. [    1.751563] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  1076. [    1.757499] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  1077. [    1.764009] NET: Registered protocol family 1
  1078. [    1.768446] RPC: Registered named UNIX socket transport module.
  1079. [    1.774174] RPC: Registered udp transport module.
  1080. [    1.778840] RPC: Registered tcp transport module.
  1081. [    1.783511] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1082. [    1.790072] Trying to unpack rootfs image as initramfs...
  1083. [    2.113201] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  1084. [    2.120628] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  1085. [    2.128939] futex hash table entries: 1024 (order: 5, 131072 bytes)
  1086. [    2.135570] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  1087. [    2.142532] NFS: Registering the id_resolver key type
  1088. [    2.147415] Key type id_resolver registered
  1089. [    2.151543] Key type id_legacy registered
  1090. [    2.155528] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  1091. [    2.162198] ntfs: driver 2.1.32 [Flags: R/W].
  1092. [    2.166527] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  1093. [    2.181324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  1094. [    2.188532] io scheduler noop registered
  1095. [    2.192423] io scheduler deadline registered
  1096. [    2.196661] io scheduler cfq registered (default)
  1097. [    2.201918] nwl-pcie fd0e0000.pcie: Link is UP
  1098. [    2.206206] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  1099. [    2.211808] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  1100. [    2.217675] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  1101. [    2.223897] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  1102. [    2.229961] pci_bus 0000:00: root bus resource [bus 00-ff]
  1103. [    2.235407] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  1104. [    2.242239] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  1105. [    2.250166] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  1106. [    2.256759] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  1107. [    2.263507] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  1108. [    2.268693] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  1109. [    2.276150] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  1110. [    2.282523] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  1111. [    2.289578] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  1112. [    2.296728] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  1113. [    2.303591] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  1114. [    2.310514] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  1115. [    2.317426] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  1116. [    2.324351] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  1117. [    2.331270] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  1118. [    2.338188] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  1119. [    2.345109] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  1120. [    2.352068] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  1121. [    2.358951] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  1122. [    2.365867] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  1123. [    2.372791] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  1124. [    2.379713] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  1125. [    2.386632] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  1126. [    2.393554] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  1127. [    2.400470] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  1128. [    2.428806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  1129. [    2.436368] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  1130. [    2.445390] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢êconsole [ttyPS0] enabled
  1131. [    2.454330] console [ttyPS0] enabled
  1132. [    2.461294] bootconsole [cdns0] disabled
  1133. [    2.461294] bootconsole [cdns0] disabled
  1134. [    2.469346] Unable to detect cache hierarchy from DT for CPU 0
  1135. [    2.479683] brd: module loaded
  1136. [    2.485461] loop: module loaded
  1137. [    2.489443] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  1138. [    2.498321] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  1139. [    2.509030] scsi host0: ahci-ceva
  1140. [    2.512456] scsi host1: ahci-ceva
  1141. [    2.515790] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  1142. [    2.523617] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  1143. [    2.531666] mtdoops: mtd device (mtddev=name/number) must be supplied
  1144. [    2.539003] zynqmp-qspi ff0f0000.spi: rx bus width not found
  1145. [    2.544944] m25p80 spi0.0: found n25q00, expected n25q512a
  1146. [    2.550660] m25p80 spi0.0: n25q00 (131072 Kbytes)
  1147. [    2.555303] 5 ofpart partitions found on MTD device spi0.0
  1148. [    2.560757] Creating 5 MTD partitions on "spi0.0":
  1149. [    2.565525] 0x000000000000-0x000000500000 : "boot"
  1150. [    2.570804] 0x000000500000-0x000000540000 : "bootenv"
  1151. [    2.576179] 0x000000540000-0x000002740000 : "kernel"
  1152. [    2.581478] 0x000002740000-0x000003740000 : "user"
  1153. [    2.586604] 0x000003740000-0x000003750000 : "test"
  1154. [    2.592602] libphy: Fixed MDIO Bus: probed
  1155. [    2.597712] tun: Universal TUN/TAP device driver, 1.6
  1156. [    2.602685] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1157. [    2.608960] CAN device driver interface
  1158. [    2.613279] macb ff0c0000.ethernet: Not enabling partial store and forward
  1159. [    2.620588] libphy: MACB_mii_bus: probed
  1160. [    2.698870] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  1161. [    2.708619] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  1162. [    2.721215] usbcore: registered new interface driver asix
  1163. [    2.726580] usbcore: registered new interface driver ax88179_178a
  1164. [    2.732627] usbcore: registered new interface driver cdc_ether
  1165. [    2.738444] usbcore: registered new interface driver net1080
  1166. [    2.744086] usbcore: registered new interface driver cdc_subset
  1167. [    2.749987] usbcore: registered new interface driver zaurus
  1168. [    2.755556] usbcore: registered new interface driver cdc_ncm
  1169. [    2.761514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1170. [    2.767959] ehci-pci: EHCI PCI platform driver
  1171. [    2.772620] usbcore: registered new interface driver uas
  1172. [    2.777880] usbcore: registered new interface driver usb-storage
  1173. [    2.784143] mousedev: PS/2 mouse device common for all mice
  1174. [    2.790054] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  1175. [    2.797226] i2c /dev entries driver
  1176. [    2.800856] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  1177. [    2.806903] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  1178. [    2.813673] usbcore: registered new interface driver uvcvideo
  1179. [    2.819337] USB Video Class driver (1.1.1)
  1180. [    2.823773] Bluetooth: HCI UART driver ver 2.3
  1181. [    2.828131] Bluetooth: HCI UART protocol H4 registered
  1182. [    2.833248] Bluetooth: HCI UART protocol BCSP registered
  1183. [    2.838543] Bluetooth: HCI UART protocol LL registered
  1184. [    2.843663] Bluetooth: HCI UART protocol ATH3K registered
  1185. [    2.845311] ata2: SATA link down (SStatus 0 SControl 330)
  1186. [    2.854427] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1187. [    2.860712] Bluetooth: HCI UART protocol Intel registered
  1188. [    2.866092] Bluetooth: HCI UART protocol Broadcom registered
  1189. [    2.871700] Bluetooth: HCI UART protocol QCA registered
  1190. [    2.876943] usbcore: registered new interface driver bcm203x
  1191. [    2.882582] usbcore: registered new interface driver bpa10x
  1192. [    2.888137] usbcore: registered new interface driver bfusb
  1193. [    2.893605] usbcore: registered new interface driver btusb
  1194. [    2.899042] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  1195. [    2.904737] usbcore: registered new interface driver ath3k
  1196. [    2.910273] EDAC MC: ECC not enabled
  1197. [    2.913902] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  1198. [    2.922935] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  1199. [    2.935231] sdhci: Secure Digital Host Controller Interface driver
  1200. [    2.941322] sdhci: Copyright(c) Pierre Ossman
  1201. [    2.945661] sdhci-pltfm: SDHCI platform and OF driver helper
  1202. [    2.998608] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  1203. [    3.006614] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  1204. [    3.014862] ledtrig-cpu: registered to indicate activity on CPUs
  1205. [    3.020911] usbcore: registered new interface driver usbhid
  1206. [    3.026395] usbhid: USB HID core driver
  1207. [    3.031803] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  1208. [    3.038681] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  1209. [    3.045838] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  1210. [    3.053195] PLL: shutdown
  1211. [    3.056622] Write failed to divider address:fd1a007c
  1212. [    3.061654] PLL: enable
  1213. [    3.064181] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  1214. [    3.072758] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  1215. [    3.082427] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  1216. [    3.092282] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  1217. [    3.099704] pktgen: Packet Generator for packet performance testing. Version: 2.75
  1218. [    3.108018] Netfilter messages via NETLINK v0.30.
  1219. [    3.112759] ip_tables: (C) 2000-2006 Netfilter Core Team
  1220. [    3.118039] Initializing XFRM netlink socket
  1221. [    3.123366] NET: Registered protocol family 10
  1222. [    3.128199] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1223. [    3.133553] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  1224. [    3.139768] NET: Registered protocol family 17
  1225. [    3.144135] NET: Registered protocol family 15
  1226. [    3.148560] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  1227. [    3.161483] Ebtables v2.0 registered
  1228. [    3.165094] can: controller area network core (rev 20120528 abi 9)
  1229. [    3.171242] NET: Registered protocol family 29
  1230. [    3.175632] can: raw protocol (rev 20120528)
  1231. [    3.179883] can: broadcast manager protocol (rev 20161123 t)
  1232. [    3.185528] can: netlink gateway (rev 20130117) max_hops=1
  1233. [    3.191563] Bluetooth: RFCOMM TTY layer initialized
  1234. [    3.196358] Bluetooth: RFCOMM socket layer initialized
  1235. [    3.201479] Bluetooth: RFCOMM ver 1.11
  1236. [    3.205206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1237. [    3.210497] Bluetooth: BNEP filters: protocol multicast
  1238. [    3.215711] Bluetooth: BNEP socket layer initialized
  1239. [    3.220654] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1240. [    3.226558] Bluetooth: HIDP socket layer initialized
  1241. [    3.231683] 9pnet: Installing 9P2000 support
  1242. [    3.235878] Key type dns_resolver registered
  1243. [    3.240526] registered taskstats version 1
  1244. [    3.244940] Btrfs loaded, crc32c=crc32c-generic
  1245. [    3.256625] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1246. [    3.262063] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1247. [    3.269928] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  1248. [    3.278586] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  1249. [    3.286697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1250. [    3.293407] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1251. [    3.300607] usb usb1: Product: xHCI Host Controller
  1252. [    3.305468] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  1253. [    3.310763] usb usb1: SerialNumber: xhci-hcd.0.auto
  1254. [    3.318975] hub 1-0:1.0: USB hub found
  1255. [    3.322676] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
  1256. [    3.328544] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  1257. [    3.335348] hub 1-0:1.0: 1 port detected
  1258. [    3.339343] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1259. [    3.342435] ata1.00: configured for UDMA/133
  1260. [    3.342752] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
  1261. [    3.357077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  1262. [    3.364757] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  1263. [    3.372859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  1264. [    3.379565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1265. [    3.386765] usb usb2: Product: xHCI Host Controller
  1266. [    3.391625] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  1267. [    3.396920] usb usb2: SerialNumber: xhci-hcd.0.auto
  1268. [    3.402006] hub 2-0:1.0: USB hub found
  1269. [    3.405694] hub 2-0:1.0: 1 port detected
  1270. [    3.409980] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 08:57:55 UTC (1532595475)
  1271. [    3.418882] clk: Not disabling unused clocks
  1272. [    3.422977] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  1273. [    3.423083] sd 0:0:0:0: [sda] Write Protect is off
  1274. [    3.423130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1275. [    3.444333] ALSA device list:
  1276. [    3.447280]   #0: DisplayPort monitor
  1277. [    3.453982] sd 0:0:0:0: [sda] Attached SCSI disk
  1278. [    3.458716] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  1279. INIT: version 2.88 booting
  1280. Starting udev
  1281. [    3.576953] udevd[1623]: starting version 3.2
  1282. [    3.581572] random: udevd: uninitialized urandom read (16 bytes read)
  1283. [    3.588009] random: udevd: uninitialized urandom read (16 bytes read)
  1284. [    3.594428] random: udevd: uninitialized urandom read (16 bytes read)
  1285. [    3.600819] random: udevd: uninitialized urandom read (16 bytes read)
  1286. [    3.610901] udevd[1624]: starting eudev-3.2
  1287. [    3.649355] random: udevd: uninitialized urandom read (16 bytes read)
  1288. [    3.655773] random: udevd: uninitialized urandom read (16 bytes read)
  1289. [    3.670997] random: udevd: uninitialized urandom read (16 bytes read)
  1290. [    3.681380] random: udevd: uninitialized urandom read (16 bytes read)
  1291. [    3.690994] 4fm: loading out-of-tree module taints kernel.
  1292. [    3.697885] pci 0000:00:00.0: enabling device (0000 -> 0002)
  1293. [    3.702132] <dma1> init: registered
  1294. [    3.706995] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  1295. [    3.712628] Accessing 47232 of total 1 entries in dev->bar
  1296. [    3.718099] dev->bar[u].virt_address:cf3d07c value:38011121
  1297. [    3.723619] dev->bar[u].virt_address:cf3d080 value:deadbeef
  1298. [    3.729201] dev->bar[u].virt_address:cf3d084 value:baadf00d
  1299. [    3.734713] dev->bar[u].virt_address:cf3d088 value:eba00eba
  1300. [    3.740295] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  1301. [    3.752144] <dma2> init: registered
  1302. [    3.753225] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  1303. Populating dev cache
  1304. [    4.634248] random: dd: uninitialized urandom read (512 bytes read)
  1305. Starting internet superserver: inetd.
  1306. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  1307. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  1308. INIT: Entering runlevel: 5
  1309. Hello World
  1310. [22]:0x12
  1311. [20]:0x201
  1312. [20]:0x201
  1313. [22]:0x1
  1314. [0]:0x140
  1315. [0]:0x140
  1316. Configuring network interfaces... [    4.924400] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1317. done.
  1318. Starting Dropbear SSH server: [    4.953034] random: dropbearkey: uninitialized urandom read (32 bytes read)
  1319. Generating key, this may take a while...
  1320. [    5.938718] macb ff0c0000.ethernet eth0: link up (1000/Full)
  1321. [    5.944319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1322. Public key portion is:
  1323. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCtBURrhoXQQSQvr6E42A+ucdKPeXyyw6L1oRpYa5qUZPnn9D3BBFXxMWDg8DBSoI9n4YbFW2YgCFx7X0nDkK8t9pv2C0W1RjmMUR/goQQYHoOWFJatIPz2OT86C/PWOkPXwagYWxHLXFjyr0DvyWt0GYCVmEaHx2pShX09ePyq0tZIlH+dU3gcbOnpcf4oNo1/rfL+j4fz9ekwRaVwk8ww7LHmaST9Bn11sAMOvhU7zRyX1mqt98CRrYjFt4cyuIhNMaR/2Bsx4kySPJ8dCVes/JodVqk60TN9LgTgO7UFoD9IeUjo58A8UvWfRF+DbCCSOXkog+ICGrRanmENImH3 root@VP88x_2017_3_PRJ0191
  1324. Fingerprint: md5 c7:5a:f0:2c:4b:b5:9f:06:df:57:29:30:69:8e:19:7[    8.032688] random: fast init done
  1325. d
  1326. dropbear.
  1327. Starting syslogd/klogd: done
  1328. [    8.343561] random: crng init done
  1329. [   10.145565] jffs2: notice: (2130) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  1330. hello world.....
  1331. Starting tcf-agent: OK
  1332.  
  1333. root@VP88x_2017_3_PRJ0191:~# mount
  1334. rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
  1335. proc on /proc type proc (rw,relatime)
  1336. sysfs on /sys type sysfs (rw,relatime)
  1337. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  1338. devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
  1339. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
  1340. tmpfs on /var/volatile type tmpfs (rw,relatime)
  1341. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
  1342. /dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
  1343. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
  1344. sda   sda1
  1345. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda^C
  1346. root@VP88x_2017_3_PRJ0191:~# fdisk /dev/sda
  1347.  
  1348. The number of cylinders for this disk is set to 30401.
  1349. There is nothing wrong with that, but this is larger than 1024,
  1350. and could in certain setups cause problems with:
  1351. 1) software that runs at boot time (e.g., old versions of LILO)
  1352. 2) booting and partitioning software from other OSs
  1353.    (e.g., DOS FDISK, OS/2 FDISK)
  1354.  
  1355. Command (m for help): d
  1356. Selected partition 1
  1357.  
  1358. Command (m for help): d
  1359. No partition is defined yet!
  1360.  
  1361. Command (m for help): d
  1362. No partition is defined yet!
  1363.  
  1364. Command (m for help): n
  1365. Command action
  1366.    e   extended
  1367.    p   primary partition (1-4)
  1368. p
  1369. Partition number (1-4): Value is out of range
  1370. Partition number (1-4): Value is out of range
  1371. Partition number (1-4): Value is out of range
  1372. Partition number (1-4): 1
  1373. First cylinder (1-30401, default 1): Using default value 1
  1374. Last cylinder or +size or +sizeM or +sizeK (1-30401, default 30401): Using default value 30401
  1375.  
  1376. Command (m for help):
  1377. Command (m for help):
  1378. Command (m for help): w
  1379. The partition table has been altered.
  1380. Calling ioctl() to re-read partition table
  1381. [  113.993684]  sda: sda1
  1382. root@VP88x_2017_3_PRJ0191:~# [  113.998038]  sda: sda1
  1383.  
  1384. root@VP88x_2017_3_PRJ0191:~#
  1385. root@VP88x_2017_3_PRJ0191:~#
  1386. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda1
  1387. root@VP88x_2017_3_PRJ0191:~# sync
  1388. root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda1^C
  1389. root@VP88x_2017_3_PRJ0191:~# reboot
  1390.  
  1391. The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 0é00:2
  1392. INIT: Sending processes the TERM signal
  1393. root@VP88x_2017_3_PRJ0191:~# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2117)
  1394. dropbear.
  1395. Stopping syslogd/klogd: stopped syslogd (pid 2125)
  1396. stopped klogd (pid 2128)
  1397. done
  1398. Stopping tcf-agent: OK
  1399. Deconfiguring network interfaces... done.
  1400. Sending all processes the TERM signal...
  1401. logout
  1402. [  156.466627] macb ff0c0000.ethernet eth0: link down
  1403. Sending all processes the KILL signal...
  1404. Unmounting remote filesystems...
  1405. Deactivating swap...
  1406. Unmounting local filesystems...
  1407. Rebooting... [  163.418793] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1408. êXilinx Zynq MP First Stage Boot Loader
  1409. Release 2017.3   May 24 2018  -  10:35:53
  1410. Marvell PHY reset
  1411. SI5338 0x70 already configured
  1412. SI5338 0x71 already configured
  1413.  
  1414.  
  1415. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  1416.  
  1417. I2C:   ready
  1418. DRAM:  2 GiB
  1419. EL Level:       EL2
  1420. Chip ID:        xczu3eg
  1421. MMC:   Card did not respond to voltage select!
  1422. sdhci@ff160000 - probe failed: -95
  1423. Card did not respond to voltage select!
  1424.  
  1425. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  1426. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  1427. *** Warning - bad CRC, using default environment
  1428.  
  1429. In:    serial
  1430. Out:   serial
  1431. Err:   serial
  1432. Bootmode: QSPI_MODE
  1433. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  1434. eth0: ethernet@ff0c0000
  1435. U-BOOT for VP88x_2017_3_PRJ0191
  1436.  
  1437. Hit any key to stop autoboot:  0
  1438. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  1439. device 0 offset 0x540000, size 0x2200000
  1440. SF: 35651584 bytes @ 0x540000 Read: OK
  1441. ## Loading kernel from FIT Image at 10000000 ...
  1442.    Using 'conf@1' configuration
  1443.    Trying 'kernel@0' kernel subimage
  1444.      Description:  Linux Kernel
  1445.      Type:         Kernel Image
  1446.      Compression:  uncompressed
  1447.      Data Start:   0x100000d8
  1448.      Data Size:    12503552 Bytes = 11.9 MiB
  1449.      Architecture: AArch64
  1450.      OS:           Linux
  1451.      Load Address: 0x00080000
  1452.      Entry Point:  0x00080000
  1453.      Hash algo:    sha1
  1454.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  1455.    Verifying Hash Integrity ... sha1+ OK
  1456. ## Loading ramdisk from FIT Image at 10000000 ...
  1457.    Using 'conf@1' configuration
  1458.    Trying 'ramdisk@0' ramdisk subimage
  1459.      Description:  ramdisk
  1460.      Type:         RAMDisk Image
  1461.      Compression:  uncompressed
  1462.      Data Start:   0x10bf54e4
  1463.      Data Size:    8973721 Bytes = 8.6 MiB
  1464.      Architecture: AArch64
  1465.      OS:           Linux
  1466.      Load Address: unavailable
  1467.      Entry Point:  unavailable
  1468.      Hash algo:    sha1
  1469.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  1470.    Verifying Hash Integrity ... sha1+ OK
  1471. ## Loading fdt from FIT Image at 10000000 ...
  1472.    Using 'conf@1' configuration
  1473.    Trying 'fdt@0' fdt subimage
  1474.      Description:  Flattened Device Tree blob
  1475.      Type:         Flat Device Tree
  1476.      Compression:  uncompressed
  1477.      Data Start:   0x10becbd0
  1478.      Data Size:    34910 Bytes = 34.1 KiB
  1479.      Architecture: AArch64
  1480.      Hash algo:    sha1
  1481.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  1482.    Verifying Hash Integrity ... sha1+ OK
  1483.    Booting using the fdt blob at 0x10becbd0
  1484.    Loading Kernel Image ... OK
  1485.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  1486.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  1487.  
  1488. Starting kernel ...
  1489.  
  1490. [    0.000000] Booting Linux on physical CPU 0x0
  1491. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  1492. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  1493. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  1494. [    0.000000] bootconsole [cdns0] enabled
  1495. [    0.000000] efi: Getting EFI parameters from FDT:
  1496. [    0.000000] efi: UEFI not found.
  1497. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  1498. [    0.000000] psci: probing for conduit method from DT.
  1499. [    0.000000] psci: PSCIv1.0 detected in firmware.
  1500. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  1501. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  1502. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  1503. [    0.000000] Detected VIPT I-cache on CPU0
  1504. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  1505. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  1506. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  1507. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  1508. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  1509. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  1510. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  1511. [    0.000000] Virtual kernel memory layout:
  1512. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  1513. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  1514. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  1515. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  1516. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  1517. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  1518. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  1519. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  1520. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  1521. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  1522. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  1523. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  1524. [    0.000000] Hierarchical RCU implementation.
  1525. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  1526. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  1527. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  1528. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  1529. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  1530. [    0.000000] GIC: Using split EOI/Deactivate mode
  1531. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  1532. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  1533. [    0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  1534. [    0.008252] Console: colour dummy device 80x25
  1535. [    0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  1536. [    0.022877] pid_max: default: 32768 minimum: 301
  1537. [    0.027570] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  1538. [    0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  1539. [    0.041861] ASID allocator initialised with 65536 entries
  1540. [    0.047556] zynqmp_plat_init Power management API v0.3
  1541. [    0.052569] EFI services will not be available.
  1542. [    0.057331] Detected VIPT I-cache on CPU1
  1543. [    0.057365] CPU1: Booted secondary processor [410fd034]
  1544. [    0.057623] Detected VIPT I-cache on CPU2
  1545. [    0.057639] CPU2: Booted secondary processor [410fd034]
  1546. [    0.057885] Detected VIPT I-cache on CPU3
  1547. [    0.057901] CPU3: Booted secondary processor [410fd034]
  1548. [    0.057933] Brought up 4 CPUs
  1549. [    0.088219] SMP: Total of 4 processors activated.
  1550. [    0.092895] CPU features: detected feature: 32-bit EL0 Support
  1551. [    0.098692] CPU: All CPU(s) started at EL2
  1552. [    0.102765] alternatives: patching kernel code
  1553. [    0.108027] devtmpfs: initialized
  1554. [    0.115559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  1555. [    0.136577] xor: measuring software checksum speed
  1556. [    0.181244]    8regs     :  2543.000 MB/sec
  1557. [    0.221268]    8regs_prefetch:  2266.000 MB/sec
  1558. [    0.265629]    32regs    :  3125.000 MB/sec
  1559. [    0.305657]    32regs_prefetch:  2627.000 MB/sec
  1560. [    0.310078] xor: using function: 32regs (3125.000 MB/sec)
  1561. [    0.315532] pinctrl core: initialized pinctrl subsystem
  1562. [    0.321214] NET: Registered protocol family 16
  1563. [    0.326362] Failed to initialise IOMMU /amba/smmu@fd800000
  1564. [    0.331864] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  1565. [    0.339066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  1566. [    0.374357] DMA: preallocated 65536 KiB pool for atomic allocations
  1567. [    0.390747] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  1568. [    0.398229] ARM CCI_400_r1 PMU driver probed[    0.405014] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  1569. [    0.435767] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  1570. [    0.508892] raid6: int64x1  gen()   447 MB/s
  1571. [    0.580933] raid6: int64x1  xor()   486 MB/s
  1572. [    0.653007] raid6: int64x2  gen()   741 MB/s
  1573. [    0.724983] raid6: int64x2  xor()   661 MB/s
  1574. [    0.797044] raid6: int64x4  gen()  1086 MB/s
  1575. [    0.869075] raid6: int64x4  xor()   816 MB/s
  1576. [    0.941127] raid6: int64x8  gen()  1266 MB/s
  1577. [    1.013140] raid6: int64x8  xor()   824 MB/s
  1578. [    1.085252] raid6: neonx1   gen()   797 MB/s
  1579. [    1.157257] raid6: neonx1   xor()   837 MB/s
  1580. [    1.229294] raid6: neonx2   gen()  1286 MB/s
  1581. [    1.301331] raid6: neonx2   xor()  1143 MB/s
  1582. [    1.373378] raid6: neonx4   gen()  1665 MB/s
  1583. [    1.445420] raid6: neonx4   xor()  1306 MB/s
  1584. [    1.517448] raid6: neonx8   gen()  1752 MB/s
  1585. [    1.589492] raid6: neonx8   xor()  1348 MB/s
  1586. [    1.593574] raid6: using algorithm neonx8 gen() 1752 MB/s
  1587. [    1.598935] raid6: .... xor() 1348 MB/s, rmw enabled
  1588. [    1.603866] raid6: using intx1 recovery algorithm
  1589. [    1.609025] Write failed gate address:1000f02
  1590. [    1.616933] SCSI subsystem initialized
  1591. [    1.620721] usbcore: registered new interface driver usbfs
  1592. [    1.626046] usbcore: registered new interface driver hub
  1593. [    1.631327] usbcore: registered new device driver usb
  1594. [    1.636379] media: Linux media interface: v0.10
  1595. [    1.640825] Linux video capture interface: v2.00
  1596. [    1.645413] pps_core: LinuxPPS API ver. 1 registered
  1597. [    1.650317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1598. [    1.659411] PTP clock support registered
  1599. [    1.663311] EDAC MC: Ver: 3.0.0
  1600. [    1.666667] FPGA manager framework
  1601. [    1.670014] fpga-region fpga-full: FPGA Region probed
  1602. [    1.675079] Advanced Linux Sound Architecture Driver Initialized.
  1603. [    1.681295] Bluetooth: Core ver 2.22
  1604. [    1.684708] NET: Registered protocol family 31
  1605. [    1.689097] Bluetooth: HCI device and connection manager initialized
  1606. [    1.695415] Bluetooth: HCI socket layer initialized
  1607. [    1.700256] Bluetooth: L2CAP socket layer initialized
  1608. [    1.705283] Bluetooth: SCO socket layer initialized
  1609. [    1.710710] clocksource: Switched to clocksource arch_sys_counter
  1610. [    1.716728] VFS: Disk quotas dquot_6.6.0
  1611. [    1.720538] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1612. [    1.730765] NET: Registered protocol family 2
  1613. [    1.735312] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1614. [    1.742435] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  1615. [    1.749221] TCP: Hash tables configured (established 16384 bind 16384)
  1616. [    1.755615] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  1617. [    1.761549] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  1618. [    1.768057] NET: Registered protocol family 1
  1619. [    1.772488] RPC: Registered named UNIX socket transport module.
  1620. [    1.778254] RPC: Registered udp transport module.
  1621. [    1.782881] RPC: Registered tcp transport module.
  1622. [    1.787551] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1623. [    1.794109] Trying to unpack rootfs image as initramfs...
  1624. [    2.117739] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  1625. [    2.125166] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  1626. [    2.133462] futex hash table entries: 1024 (order: 5, 131072 bytes)
  1627. [    2.140130] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  1628. [    2.147059] NFS: Registering the id_resolver key type
  1629. [    2.151938] Key type id_resolver registered
  1630. [    2.156067] Key type id_legacy registered
  1631. [    2.160052] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  1632. [    2.166722] ntfs: driver 2.1.32 [Flags: R/W].
  1633. [    2.171049] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  1634. [    2.185733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  1635. [    2.192946] io scheduler noop registered
  1636. [    2.196831] io scheduler deadline registered
  1637. [    2.201072] io scheduler cfq registered (default)
  1638. [    2.206328] nwl-pcie fd0e0000.pcie: Link is UP
  1639. [    2.210617] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  1640. [    2.216219] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  1641. [    2.222087] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  1642. [    2.228308] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  1643. [    2.234372] pci_bus 0000:00: root bus resource [bus 00-ff]
  1644. [    2.239818] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  1645. [    2.246650] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  1646. [    2.254582] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  1647. [    2.261179] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  1648. [    2.267927] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  1649. [    2.273114] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  1650. [    2.280583] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  1651. [    2.286962] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  1652. [    2.294015] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  1653. [    2.301163] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  1654. [    2.308027] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  1655. [    2.314944] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  1656. [    2.321865] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  1657. [    2.328789] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  1658. [    2.335705] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  1659. [    2.342624] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  1660. [    2.349549] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  1661. [    2.356504] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  1662. [    2.363389] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  1663. [    2.370302] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  1664. [    2.377234] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  1665. [    2.384146] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  1666. [    2.391068] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  1667. [    2.397990] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  1668. [    2.404906] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  1669. [    2.433029] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  1670. [    2.440497] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  1671. [    2.449557] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªÂ¢ÊÂêconsole [ttyPS0] enabled
  1672. [    2.458498] console [ttyPS0] enabled
  1673. [    2.465462] bootconsole [cdns0] disabled
  1674. [    2.465462] bootconsole [cdns0] disabled
  1675. [    2.473545] Unable to detect cache hierarchy from DT for CPU 0
  1676. [    2.483891] brd: module loaded
  1677. [    2.489704] loop: module loaded
  1678. [    2.493683] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  1679. [    2.502559] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  1680. [    2.513325] scsi host0: ahci-ceva
  1681. [    2.516750] scsi host1: ahci-ceva
  1682. [    2.520084] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  1683. [    2.527916] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  1684. [    2.535965] mtdoops: mtd device (mtddev=name/number) must be supplied
  1685. [    2.543330] zynqmp-qspi ff0f0000.spi: rx bus width not found
  1686. [    2.549274] m25p80 spi0.0: found n25q00, expected n25q512a
  1687. [    2.554978] m25p80 spi0.0: n25q00 (131072 Kbytes)
  1688. [    2.559616] 5 ofpart partitions found on MTD device spi0.0
  1689. [    2.565070] Creating 5 MTD partitions on "spi0.0":
  1690. [    2.569842] 0x000000000000-0x000000500000 : "boot"
  1691. [    2.575113] 0x000000500000-0x000000540000 : "bootenv"
  1692. [    2.580524] 0x000000540000-0x000002740000 : "kernel"
  1693. [    2.585813] 0x000002740000-0x000003740000 : "user"
  1694. [    2.590958] 0x000003740000-0x000003750000 : "test"
  1695. [    2.596985] libphy: Fixed MDIO Bus: probed
  1696. [    2.602134] tun: Universal TUN/TAP device driver, 1.6
  1697. [    2.607104] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1698. [    2.613385] CAN device driver interface
  1699. [    2.617709] macb ff0c0000.ethernet: Not enabling partial store and forward
  1700. [    2.625018] libphy: MACB_mii_bus: probed
  1701. [    2.702981] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  1702. [    2.712725] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  1703. [    2.725321] usbcore: registered new interface driver asix
  1704. [    2.730686] usbcore: registered new interface driver ax88179_178a
  1705. [    2.736733] usbcore: registered new interface driver cdc_ether
  1706. [    2.742551] usbcore: registered new interface driver net1080
  1707. [    2.748194] usbcore: registered new interface driver cdc_subset
  1708. [    2.754094] usbcore: registered new interface driver zaurus
  1709. [    2.759663] usbcore: registered new interface driver cdc_ncm
  1710. [    2.765624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1711. [    2.772066] ehci-pci: EHCI PCI platform driver
  1712. [    2.776721] usbcore: registered new interface driver uas
  1713. [    2.781980] usbcore: registered new interface driver usb-storage
  1714. [    2.788239] mousedev: PS/2 mouse device common for all mice
  1715. [    2.794178] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  1716. [    2.801350] i2c /dev entries driver
  1717. [    2.804986] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  1718. [    2.811068] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  1719. [    2.817855] usbcore: registered new interface driver uvcvideo
  1720. [    2.823538] USB Video Class driver (1.1.1)
  1721. [    2.827953] Bluetooth: HCI UART driver ver 2.3
  1722. [    2.832318] Bluetooth: HCI UART protocol H4 registered
  1723. [    2.837434] Bluetooth: HCI UART protocol BCSP registered
  1724. [    2.842729] Bluetooth: HCI UART protocol LL registered
  1725. [    2.847849] Bluetooth: HCI UART protocol ATH3K registered
  1726. [    2.848913] ata2: SATA link down (SStatus 0 SControl 330)
  1727. [    2.858613] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1728. [    2.864898] Bluetooth: HCI UART protocol Intel registered
  1729. [    2.870279] Bluetooth: HCI UART protocol Broadcom registered
  1730. [    2.875886] Bluetooth: HCI UART protocol QCA registered
  1731. [    2.881130] usbcore: registered new interface driver bcm203x
  1732. [    2.886768] usbcore: registered new interface driver bpa10x
  1733. [    2.892322] usbcore: registered new interface driver bfusb
  1734. [    2.897792] usbcore: registered new interface driver btusb
  1735. [    2.903228] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  1736. [    2.908924] usbcore: registered new interface driver ath3k
  1737. [    2.914459] EDAC MC: ECC not enabled
  1738. [    2.918089] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  1739. [    2.927120] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  1740. [    2.939412] sdhci: Secure Digital Host Controller Interface driver
  1741. [    2.945508] sdhci: Copyright(c) Pierre Ossman
  1742. [    2.949848] sdhci-pltfm: SDHCI platform and OF driver helper
  1743. [    3.002716] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  1744. [    3.010721] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  1745. [    3.017453] ledtrig-cpu: registered to indicate activity on CPUs
  1746. [    3.023509] usbcore: registered new interface driver usbhid
  1747. [    3.028992] usbhid: USB HID core driver
  1748. [    3.034386] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  1749. [    3.041276] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  1750. [    3.048439] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  1751. [    3.055800] PLL: shutdown
  1752. [    3.059238] Write failed to divider address:fd1a007c
  1753. [    3.064270] PLL: enable
  1754. [    3.066795] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  1755. [    3.074838] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  1756. [    3.084509] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  1757. [    3.094348] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  1758. [    3.101762] pktgen: Packet Generator for packet performance testing. Version: 2.75
  1759. [    3.109662] Netfilter messages via NETLINK v0.30.
  1760. [    3.114407] ip_tables: (C) 2000-2006 Netfilter Core Team
  1761. [    3.119681] Initializing XFRM netlink socket
  1762. [    3.124049] NET: Registered protocol family 10
  1763. [    3.129912] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1764. [    3.135272] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  1765. [    3.141495] NET: Registered protocol family 17
  1766. [    3.145864] NET: Registered protocol family 15
  1767. [    3.150293] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  1768. [    3.163214] Ebtables v2.0 registered
  1769. [    3.166826] can: controller area network core (rev 20120528 abi 9)
  1770. [    3.172969] NET: Registered protocol family 29
  1771. [    3.177362] can: raw protocol (rev 20120528)
  1772. [    3.181613] can: broadcast manager protocol (rev 20161123 t)
  1773. [    3.187257] can: netlink gateway (rev 20130117) max_hops=1
  1774. [    3.192783] Bluetooth: RFCOMM TTY layer initialized
  1775. [    3.197591] Bluetooth: RFCOMM socket layer initialized
  1776. [    3.202715] Bluetooth: RFCOMM ver 1.11
  1777. [    3.206446] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1778. [    3.211734] Bluetooth: BNEP filters: protocol multicast
  1779. [    3.216944] Bluetooth: BNEP socket layer initialized
  1780. [    3.221888] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1781. [    3.227793] Bluetooth: HIDP socket layer initialized
  1782. [    3.232917] 9pnet: Installing 9P2000 support
  1783. [    3.237115] Key type dns_resolver registered
  1784. [    3.241762] registered taskstats version 1
  1785. [    3.246160] Btrfs loaded, crc32c=crc32c-generic
  1786. [    3.257805] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1787. [    3.263242] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1788. [    3.271107] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  1789. [    3.279755] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  1790. [    3.285826] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1791. [    3.292530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1792. [    3.299732] usb usb1: Product: xHCI Host Controller
  1793. [    3.304591] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  1794. [    3.309886] usb usb1: SerialNumber: xhci-hcd.0.auto
  1795. [    3.315058] hub 1-0:1.0: USB hub found
  1796. [    3.318742] hub 1-0:1.0: 1 port detected
  1797. [    3.322648] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
  1798. [    3.328533] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  1799. [    3.335438] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1800. [    3.340848] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  1801. [    3.348539] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  1802. [    3.356605] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  1803. [    3.363322] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1804. [    3.370527] usb usb2: Product: xHCI Host Controller
  1805. [    3.370863] ata1.00: configured for UDMA/133
  1806. [    3.371156] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
  1807. [    3.387711] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  1808. [    3.393005] usb usb2: SerialNumber: xhci-hcd.0.auto
  1809. [    3.398085] hub 2-0:1.0: USB hub found
  1810. [    3.401763] hub 2-0:1.0: 1 port detected
  1811. [    3.406050] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 09:01:04 UTC (1532595664)
  1812. [    3.414949] clk: Not disabling unused clocks
  1813. [    3.419137] ALSA device list:
  1814. [    3.422078]   #0: DisplayPort monitor
  1815. [    3.462996] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  1816. [    3.470485] sd 0:0:0:0: [sda] Write Protect is off
  1817. [    3.475239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1818. [    3.508871]  sda: sda1
  1819. [    3.511655] sd 0:0:0:0: [sda] Attached SCSI disk
  1820. [    3.516376] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  1821. INIT: version 2.88 booting
  1822. Starting udev
  1823. [    3.629384] udevd[1622]: starting version 3.2
  1824. [    3.634071] random: udevd: uninitialized urandom read (16 bytes read)
  1825. [    3.640535] random: udevd: uninitialized urandom read (16 bytes read)
  1826. [    3.646947] random: udevd: uninitialized urandom read (16 bytes read)
  1827. [    3.653342] random: udevd: uninitialized urandom read (16 bytes read)
  1828. [    3.663360] udevd[1623]: starting eudev-3.2
  1829. [    3.701707] random: udevd: uninitialized urandom read (16 bytes read)
  1830. [    3.708129] random: udevd: uninitialized urandom read (16 bytes read)
  1831. [    3.723256] random: udevd: uninitialized urandom read (16 bytes read)
  1832. [    3.733534] random: udevd: uninitialized urandom read (16 bytes read)
  1833. [    3.743113] 4fm: loading out-of-tree module taints kernel.
  1834. [    3.749683] pci 0000:00:00.0: enabling device (0000 -> 0002)
  1835. [    3.755328] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  1836. [    3.760971] Accessing 47232 of total 1 entries in dev->bar
  1837. [    3.762213] <dma1> init: registered
  1838. [    3.769916] dev->bar[u].virt_address:cf3d07c value:38011121
  1839. [    3.775419] dev->bar[u].virt_address:cf3d080 value:deadbeef
  1840. [    3.781001] dev->bar[u].virt_address:cf3d084 value:baadf00d
  1841. [    3.786568] dev->bar[u].virt_address:cf3d088 value:eba00eba
  1842. [    3.792082] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  1843. [    3.800593] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  1844. [    3.804050] <dma2> init: registered
  1845. Populating dev cache
  1846. [    4.429621] random: dd: uninitialized urandom read (512 bytes read)
  1847. Starting internet superserver: inetd.
  1848. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  1849. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  1850. INIT: Entering runlevel: 5
  1851. Hello World
  1852. [22]:0x12
  1853. [20]:0x201
  1854. [20]:0x201
  1855. [22]:0x1
  1856. [0]:0x140
  1857. [0]:0x140
  1858. Configuring network interfaces... [    4.720846] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1859. done.
  1860. Starting Dropbear SSH server: [    4.749613] random: dropbearkey: uninitialized urandom read (32 bytes read)
  1861. Generating key, this may take a while...
  1862. [    5.746823] macb ff0c0000.ethernet eth0: link up (1000/Full)
  1863. [    5.752431] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1864. Public key portion is:
  1865. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDKemropGANgZZK3yRkO1dw83u0WPq6tLUIObosRKMn2k7WrLWC26yzh92qHIh5zbdeLVxQ9JjccvlZVx2ZAUKx9B8zZUuY0btp/uCZJUEFI/0nsiFM3sC/5e6JVAzYsVGN2+j74CpWAM+cb39mdrdEkV/lij1S4ds023fvslwwjEUyODI05TBwOhaFW8AylhbrKFK78WCLXD5Nx69YxAGyIF5ZBWdjM1KFCdjL29csEmt1D1VV1Npbs4ftiKd8OdytY4vFWlO69GX12bToi7+4Qto8p0+XcGGw7BrzKvvJLqMfS1kx/XK4RMnPIC0BBoeH9CJha7oszX5LWF4c7bCH root@VP88x_2017_3_PRJ0191
  1866. Fingerprint: md5 3d:8e:d0:a0:4b:4f:29:3d:73:2d:e1:59:9d:d5:f6:98
  1867. dropbear.
  1868. Starting syslogd/klogd: done
  1869. [    6.960737] random: fast init done
  1870. [    7.320887] random: crng init done
  1871. mount[    9.238353] jffs2: notice: (2113) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  1872. hello world.....
  1873. Starting tcf-agent: OK
  1874.  
  1875. root@VP88x_2017_3_PRJ0191:~#
  1876. root@VP88x_2017_3_PRJ0191:~# mount
  1877. rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
  1878. proc on /proc type proc (rw,relatime)
  1879. sysfs on /sys type sysfs (rw,relatime)
  1880. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  1881. devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
  1882. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
  1883. tmpfs on /var/volatile type tmpfs (rw,relatime)
  1884. /dev/sda1 on /run/media/sda1 type vfat (rw,relatime,gid=6,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
  1885. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
  1886. /dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
  1887. root@VP88x_2017_3_PRJ0191:~# mount | grep sd
  1888. /dev/sda1 on /run/media/sda1 type vfat (rw,relatime,gid=6,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
  1889. root@VP88x_2017_3_PRJ0191:~# ls /run/media/sda1/
  1890. root@VP88x_2017_3_PRJ0191:~# cd /tmp
  1891. root@VP88x_2017_3_PRJ0191:/tmp# ls
  1892. diagnostic.elf
  1893. root@VP88x_2017_3_PRJ0191:/tmp# chmod +x *
  1894. root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
  1895. enter number of cyclic (0 - for infinite)
  1896. 1
  1897. SPI1 result = 0  SUCCESS
  1898. Opened device VP880. PCIe read from CID 0x2000: 2f70013
  1899. PCIe result = 0  SUCCESS
  1900.  
  1901. --- AMS zynq PS System monitor---
  1902. temperature ps 52.75C
  1903. vcc_psintlp    0.87V
  1904. vcc_psintfp    0.87V
  1905. vcc_psaux      1.81V
  1906. vcc_psddr_504  1.21V
  1907. vcc_psio3_503  3.24V
  1908. vcc_psio0_500  3.24V
  1909. vcc_psio1_501  1.80V
  1910. vcc_psio2_502  1.80V
  1911. vcc_psmgtravcc 0.87V
  1912. vcc_psmgtravtt 1.81V
  1913. ---------------------------------
  1914.  
  1915. --- AMS zynq PL System monitor---
  1916. temperature pl 50.90C
  1917. vcc_int        0.87V
  1918. vcc_aux        1.81V
  1919. vcc_bram       0.87V
  1920. vcc_psintlp    0.87V
  1921. vcc_psintfp    0.87V
  1922. vcc_psaux      1.82V
  1923. vcc_vuser1     0.00V
  1924. vcc_vuser2     0.00V
  1925. vcc_vuser3     0.00V
  1926. vcc_vuser4     0.00V
  1927. ---------------------------------
  1928. ranran.............temperature         28 C
  1929. vmon_fmc_vadj       1.79V
  1930. vmon_fmc_viob       1.79V
  1931. vmon_sblast_vcore   1.64V
  1932. vmon_sblast_vio     1.48V
  1933. vmon_2v5_mgt_refclk 2.44V
  1934. vmon_3v3_mgt_refclk 3.23V
  1935. vmon_1v2            1.18V
  1936. vmon_1v4            1.40V
  1937. vmon_vaux           3.32V
  1938. VPX_SYS_RST_N       :1
  1939. PS_ERROR_STATUS     :1
  1940. PS_ERROR_OUT        :1
  1941. PS_INIT_B           :1
  1942. PS_DONE             :1
  1943. INIT_B              :1
  1944. DONE                :1
  1945. FLASH_A26           :1
  1946. HSC_12V_PG          :1
  1947. HSC_5V_PG           :1
  1948. VPX_GAP             :1
  1949. VPX_GA4             :1
  1950. VPX_GA3             :1
  1951. VPX_GA2             :1
  1952. VPX_GA1             :1
  1953. VPX_GA0             :1
  1954. PG_LED_N            :1
  1955. ZYNQ_CONFDONE_LED   :1
  1956. FPGA_CONFDONE_LED   :1
  1957. FMC_VADJ_VS0        :1
  1958. FMC_VADJ_VS1        :1
  1959. FMC_VADJ_VS2        :1
  1960. VADJ_FMC_EN_L       :1
  1961. FMC_BYPASS          :1
  1962. HSC_ON              :1
  1963. HSC_3V3_PG          :1
  1964. PG_C2M_3V3          :1
  1965. MGT_PG              :1
  1966. DDR4_VTT_PG         :1
  1967. DDR4_PG             :1
  1968. PG_FPGA_CORE        :1
  1969. 1V8_LOC_2V5_VPP_PG  :1
  1970. HSC Source channel 1     3.250V
  1971. HSC Source channel 2     5.031V
  1972. HSC ADIN channel 1       0.423V
  1973. HSC ADIN channel 2       0.423V
  1974. HSC Sense channel 1      14.625mV
  1975. HSC Current channel 1    2.925A
  1976. HSC Sense channel 2      2.625mV
  1977. HSC Current channel 2    0.875A
  1978. HSC Power channel 1      9.506W
  1979. HSC Power channel 2      4.402W
  1980. ---------------------------------------------------
  1981. HSC Source channel 1     2.500V
  1982. HSC Source channel 2     11.906V
  1983. HSC ADIN channel 1       0.423V
  1984. HSC ADIN channel 2       0.423V
  1985. HSC Sense channel 1      0.000mV
  1986. HSC Current channel 1    0.000A
  1987. HSC Sense channel 2      4.438mV
  1988. HSC Current channel 2    0.888A
  1989. HSC Power channel 1      0.000W
  1990. HSC Power channel 2      10.567W
  1991. ---------------------------------------------------
  1992. HOSTIF version 1.0.0.5
  1993. read fpga values
  1994. temp_pl         46.883728
  1995. vcc_int         0.955078
  1996. vcc_aux         1.801758
  1997. vcc_bram         0.955078
  1998. vcc_vuser0         1.500000
  1999. vcc_vuser1         1.186523
  2000. vcc_vuser2         0.000000
  2001. vcc_vuser3         0.000000
  2002. MMC result =SUCCESS
  2003. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2004.  
  2005. --- 192.168.1.20 ping statistics ---
  2006. 1 packets transmitted, 0 packets received, 100% packet loss
  2007. Ethernet result = 256  FAILED
  2008. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  2009.  
  2010. Global Units:
  2011. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  2012. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  2013. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  2014. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  2015. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  2016. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  2017.  
  2018.  
  2019. Running 'VP880-FMC134' on PCIe, CID725
  2020.  
  2021. -----------------------------------------------------------
  2022. Device 'VP880' (P0)
  2023. -----------------------------------------------------------
  2024. Constellation ID   : 759
  2025. Number Of Stars    : 19
  2026. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  2027. Firmware Build Code: 0
  2028. Firmware Revision  : 1.2
  2029. -----------------------------------------------------------
  2030.  
  2031. FMC detected
  2032. FMC result = 0  SUCCESS
  2033. memory test: OK
  2034. Memory result = 0  SUCCESS
  2035. DISK: OK
  2036. DISK result = 0 SUCCESS
  2037. FLASH: OK
  2038. FLASH result = 0 SUCCESS
  2039. read returned 9
  2040. RFFE result = 0 SUCCESS
  2041. root@VP88x_2017_3_PRJ0191:/tmp# ifconfig
  2042. eth0      Link encap:Ethernet  HWaddr 00:0A:35:00:22:01
  2043.           inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
  2044.           inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
  2045.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  2046.           RX packets:444 errors:0 dropped:0 overruns:0 frame:0
  2047.           TX packets:357 errors:0 dropped:0 overruns:0 carrier:0
  2048.           collisions:0 txqueuelen:1000
  2049.           RX bytes:554991 (541.9 KiB)  TX bytes:26233 (25.6 KiB)
  2050.           Interrupt:30
  2051.  
  2052. lo        Link encap:Local Loopback
  2053.           inet addr:127.0.0.1  Mask:255.0.0.0
  2054.           inet6 addr: ::1%4879712/128 Scope:Host
  2055.           UP LOOPBACK RUNNING  MTU:65536  Metric:1
  2056.           RX packets:4 errors:0 dropped:0 overruns:0 frame:0
  2057.           TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
  2058.           collisions:0 txqueuelen:1
  2059.           RX bytes:200 (200.0 B)  TX bytes:200 (200.0 B)
  2060.  
  2061. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
  2062. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2063. ^C
  2064. --- 192.168.1.20 ping statistics ---
  2065. 20 packets transmitted, 0 packets received, 100% packet loss
  2066. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
  2067. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2068. ^C
  2069. --- 192.168.1.20 ping statistics ---
  2070. 1 packets transmitted, 0 packets received, 100% packet loss
  2071. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.10
  2072. PING 192.168.1.10 (192.168.1.10): 56 data bytes
  2073. 64 bytes from 192.168.1.10: seq=0 ttl=64 time=0.159 ms
  2074. ^C
  2075. --- 192.168.1.10 ping statistics ---
  2076. 1 packets transmitted, 1 packets received, 0% packet loss
  2077. round-trip min/avg/max = 0.159/0.159/0.159 ms
  2078. root@VP88x_2017_3_PRJ0191:/tmp# ifconfig
  2079. eth0      Link encap:Ethernet  HWaddr 00:0A:35:00:22:01
  2080.           inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
  2081.           inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
  2082.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  2083.           RX packets:474 errors:0 dropped:0 overruns:0 frame:0
  2084.           TX packets:409 errors:0 dropped:0 overruns:0 carrier:0
  2085.           collisions:0 txqueuelen:1000
  2086.           RX bytes:561372 (548.2 KiB)  TX bytes:36177 (35.3 KiB)
  2087.           Interrupt:30
  2088.  
  2089. lo        Link encap:Local Loopback
  2090.           inet addr:127.0.0.1  Mask:255.0.0.0
  2091.           inet6 addr: ::1%4879712/128 Scope:Host
  2092.           UP LOOPBACK RUNNING  MTU:65536  Metric:1
  2093.           RX packets:6 errors:0 dropped:0 overruns:0 frame:0
  2094.           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
  2095.           collisions:0 txqueuelen:1
  2096.           RX bytes:368 (368.0 B)  TX bytes:368 (368.0 B)
  2097.  
  2098. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.10
  2099. PING 192.168.1.10 (192.168.1.10): 56 data bytes
  2100. 64 bytes from 192.168.1.10: seq=0 ttl=64 time=0.142 ms
  2101. ^C
  2102. --- 192.168.1.10 ping statistics ---
  2103. 1 packets transmitted, 1 packets received, 0% packet loss
  2104. round-trip min/avg/max = 0.142/0.142/0.142 ms
  2105. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
  2106. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2107. ^C
  2108. --- 192.168.1.20 ping statistics ---
  2109. 27 packets transmitted, 0 packets received, 100% packet loss
  2110. root@VP88x_2017_3_PRJ0191:/tmp#
  2111. root@VP88x_2017_3_PRJ0191:/tmp#
  2112. root@VP88x_2017_3_PRJ0191:/tmp#
  2113. root@VP88x_2017_3_PRJ0191:/tmp#
  2114. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
  2115. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2116. ^C
  2117. --- 192.168.1.20 ping statistics ---
  2118. 1 packets transmitted, 0 packets received, 100% packet loss
  2119. root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
  2120. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2121. Xilinx Zynq MP First Stage Boot Loader
  2122. Release 2017.3   May 24 2018  -  10:35:53
  2123. Marvell PHY reset
  2124. SI5338 0x70 not configured
  2125. SI5338 0x70 configuration finished
  2126. SI5338 0x71 not configured
  2127. SI5338 0x71 configuration finished
  2128.  
  2129.  
  2130. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  2131.  
  2132. I2C:   ready
  2133. DRAM:  2 GiB
  2134. EL Level:       EL2
  2135. Chip ID:        xczu3eg
  2136. MMC:   Card did not respond to voltage select!
  2137. sdhci@ff160000 - probe failed: -95
  2138. Card did not respond to voltage select!
  2139.  
  2140. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  2141. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  2142. *** Warning - bad CRC, using default environment
  2143.  
  2144. In:    serial
  2145. Out:   serial
  2146. Err:   serial
  2147. Bootmode: QSPI_MODE
  2148. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  2149. eth0: ethernet@ff0c0000
  2150. U-BOOT for VP88x_2017_3_PRJ0191
  2151.  
  2152. Hit any key to stop autoboot:  0
  2153. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  2154. device 0 offset 0x540000, size 0x2200000
  2155. SF: 35651584 bytes @ 0x540000 Read: OK
  2156. ## Loading kernel from FIT Image at 10000000 ...
  2157.    Using 'conf@1' configuration
  2158.    Trying 'kernel@0' kernel subimage
  2159.      Description:  Linux Kernel
  2160.      Type:         Kernel Image
  2161.      Compression:  uncompressed
  2162.      Data Start:   0x100000d8
  2163.      Data Size:    12503552 Bytes = 11.9 MiB
  2164.      Architecture: AArch64
  2165.      OS:           Linux
  2166.      Load Address: 0x00080000
  2167.      Entry Point:  0x00080000
  2168.      Hash algo:    sha1
  2169.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  2170.    Verifying Hash Integrity ... sha1+ OK
  2171. ## Loading ramdisk from FIT Image at 10000000 ...
  2172.    Using 'conf@1' configuration
  2173.    Trying 'ramdisk@0' ramdisk subimage
  2174.      Description:  ramdisk
  2175.      Type:         RAMDisk Image
  2176.      Compression:  uncompressed
  2177.      Data Start:   0x10bf54e4
  2178.      Data Size:    8973721 Bytes = 8.6 MiB
  2179.      Architecture: AArch64
  2180.      OS:           Linux
  2181.      Load Address: unavailable
  2182.      Entry Point:  unavailable
  2183.      Hash algo:    sha1
  2184.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  2185.    Verifying Hash Integrity ... sha1+ OK
  2186. ## Loading fdt from FIT Image at 10000000 ...
  2187.    Using 'conf@1' configuration
  2188.    Trying 'fdt@0' fdt subimage
  2189.      Description:  Flattened Device Tree blob
  2190.      Type:         Flat Device Tree
  2191.      Compression:  uncompressed
  2192.      Data Start:   0x10becbd0
  2193.      Data Size:    34910 Bytes = 34.1 KiB
  2194.      Architecture: AArch64
  2195.      Hash algo:    sha1
  2196.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  2197.    Verifying Hash Integrity ... sha1+ OK
  2198.    Booting using the fdt blob at 0x10becbd0
  2199.    Loading Kernel Image ... OK
  2200.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  2201.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  2202.  
  2203. Starting kernel ...
  2204.  
  2205. [    0.000000] Booting Linux on physical CPU 0x0
  2206. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  2207. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  2208. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  2209. [    0.000000] bootconsole [cdns0] enabled
  2210. [    0.000000] efi: Getting EFI parameters from FDT:
  2211. [    0.000000] efi: UEFI not found.
  2212. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  2213. [    0.000000] psci: probing for conduit method from DT.
  2214. [    0.000000] psci: PSCIv1.0 detected in firmware.
  2215. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  2216. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  2217. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  2218. [    0.000000] Detected VIPT I-cache on CPU0
  2219. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  2220. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  2221. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  2222. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  2223. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  2224. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  2225. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  2226. [    0.000000] Virtual kernel memory layout:
  2227. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  2228. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  2229. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  2230. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  2231. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  2232. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  2233. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  2234. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  2235. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  2236. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  2237. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  2238. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  2239. [    0.000000] Hierarchical RCU implementation.
  2240. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  2241. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  2242. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  2243. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  2244. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  2245. [    0.000000] GIC: Using split EOI/Deactivate mode
  2246. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  2247. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  2248. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  2249. [    0.008251] Console: colour dummy device 80x25
  2250. [    0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  2251. [    0.022878] pid_max: default: 32768 minimum: 301
  2252. [    0.027568] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  2253. [    0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  2254. [    0.041863] ASID allocator initialised with 65536 entries
  2255. [    0.047561] zynqmp_plat_init Power management API v0.3
  2256. [    0.052577] EFI services will not be available.
  2257. [    0.057340] Detected VIPT I-cache on CPU1
  2258. [    0.057373] CPU1: Booted secondary processor [410fd034]
  2259. [    0.057636] Detected VIPT I-cache on CPU2
  2260. [    0.057653] CPU2: Booted secondary processor [410fd034]
  2261. [    0.057903] Detected VIPT I-cache on CPU3
  2262. [    0.057920] CPU3: Booted secondary processor [410fd034]
  2263. [    0.057952] Brought up 4 CPUs
  2264. [    0.088237] SMP: Total of 4 processors activated.
  2265. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  2266. [    0.098709] CPU: All CPU(s) started at EL2
  2267. [    0.102782] alternatives: patching kernel code
  2268. [    0.108037] devtmpfs: initialized
  2269. [    0.115559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  2270. [    0.136552] xor: measuring software checksum speed
  2271. [    0.181217]    8regs     :  2542.000 MB/sec
  2272. [    0.221242]    8regs_prefetch:  2266.000 MB/sec
  2273. [    0.265603]    32regs    :  3125.000 MB/sec
  2274. [    0.305631]    32regs_prefetch:  2627.000 MB/sec
  2275. [    0.310052] xor: using function: 32regs (3125.000 MB/sec)
  2276. [    0.315506] pinctrl core: initialized pinctrl subsystem
  2277. [    0.321193] NET: Registered protocol family 16
  2278. [    0.326298] Failed to initialise IOMMU /amba/smmu@fd800000
  2279. [    0.331801] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  2280. [    0.339006] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  2281. [    0.374281] DMA: preallocated 65536 KiB pool for atomic allocations
  2282. [    0.390631] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  2283. [    0.398104] ARM CCI_400_r1 PMU driver probed[    0.404862] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  2284. [    0.431571] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  2285. [    0.504912] raid6: int64x1  gen()   447 MB/s
  2286. [    0.576875] raid6: int64x1  xor()   485 MB/s
  2287. [    0.648950] raid6: int64x2  gen()   741 MB/s
  2288. [    0.720956] raid6: int64x2  xor()   661 MB/s
  2289. [    0.792999] raid6: int64x4  gen()  1086 MB/s
  2290. [    0.865042] raid6: int64x4  xor()   816 MB/s
  2291. [    0.937074] raid6: int64x8  gen()  1266 MB/s
  2292. [    1.009128] raid6: int64x8  xor()   824 MB/s
  2293. [    1.081209] raid6: neonx1   gen()   798 MB/s
  2294. [    1.153201] raid6: neonx1   xor()   837 MB/s
  2295. [    1.225280] raid6: neonx2   gen()  1286 MB/s
  2296. [    1.297302] raid6: neonx2   xor()  1143 MB/s
  2297. [    1.369322] raid6: neonx4   gen()  1664 MB/s
  2298. [    1.441374] raid6: neonx4   xor()  1306 MB/s
  2299. [    1.513418] raid6: neonx8   gen()  1752 MB/s
  2300. [    1.585455] raid6: neonx8   xor()  1348 MB/s
  2301. [    1.589534] raid6: using algorithm neonx8 gen() 1752 MB/s
  2302. [    1.594896] raid6: .... xor() 1348 MB/s, rmw enabled
  2303. [    1.599827] raid6: using intx1 recovery algorithm
  2304. [    1.604983] Write failed gate address:1000f02
  2305. [    1.612942] SCSI subsystem initialized
  2306. [    1.616733] usbcore: registered new interface driver usbfs
  2307. [    1.622069] usbcore: registered new interface driver hub
  2308. [    1.627341] usbcore: registered new device driver usb
  2309. [    1.632388] media: Linux media interface: v0.10
  2310. [    1.636840] Linux video capture interface: v2.00
  2311. [    1.641424] pps_core: LinuxPPS API ver. 1 registered
  2312. [    1.646330] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  2313. [    1.655423] PTP clock support registered
  2314. [    1.659324] EDAC MC: Ver: 3.0.0
  2315. [    1.662721] FPGA manager framework
  2316. [    1.666063] fpga-region fpga-full: FPGA Region probed
  2317. [    1.671065] Advanced Linux Sound Architecture Driver Initialized.
  2318. [    1.677322] Bluetooth: Core ver 2.22
  2319. [    1.680728] NET: Registered protocol family 31
  2320. [    1.685118] Bluetooth: HCI device and connection manager initialized
  2321. [    1.691436] Bluetooth: HCI socket layer initialized
  2322. [    1.696278] Bluetooth: L2CAP socket layer initialized
  2323. [    1.701304] Bluetooth: SCO socket layer initialized
  2324. [    1.706712] clocksource: Switched to clocksource arch_sys_counter
  2325. [    1.712714] VFS: Disk quotas dquot_6.6.0
  2326. [    1.716543] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  2327. [    1.726783] NET: Registered protocol family 2
  2328. [    1.731339] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  2329. [    1.738455] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  2330. [    1.745242] TCP: Hash tables configured (established 16384 bind 16384)
  2331. [    1.751639] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  2332. [    1.757570] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  2333. [    1.764075] NET: Registered protocol family 1
  2334. [    1.768561] RPC: Registered named UNIX socket transport module.
  2335. [    1.774286] RPC: Registered udp transport module.
  2336. [    1.778965] RPC: Registered tcp transport module.
  2337. [    1.783624] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2338. [    1.790184] Trying to unpack rootfs image as initramfs...
  2339. [    2.113152] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  2340. [    2.120579] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  2341. [    2.128876] futex hash table entries: 1024 (order: 5, 131072 bytes)
  2342. [    2.135522] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  2343. [    2.142504] NFS: Registering the id_resolver key type
  2344. [    2.147388] Key type id_resolver registered
  2345. [    2.151518] Key type id_legacy registered
  2346. [    2.155502] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  2347. [    2.162172] ntfs: driver 2.1.32 [Flags: R/W].
  2348. [    2.166500] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  2349. [    2.181278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  2350. [    2.188566] io scheduler noop registered
  2351. [    2.192372] io scheduler deadline registered
  2352. [    2.196617] io scheduler cfq registered (default)
  2353. [    2.201869] nwl-pcie fd0e0000.pcie: Link is DOWN
  2354. [    2.206335] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  2355. [    2.211937] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  2356. [    2.217805] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  2357. [    2.224028] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  2358. [    2.230091] pci_bus 0000:00: root bus resource [bus 00-ff]
  2359. [    2.235536] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  2360. [    2.242373] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  2361. [    2.250078] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  2362. [    2.255843] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  2363. [    2.262214] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  2364. [    2.269265] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  2365. [    2.276422] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  2366. [    2.283284] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  2367. [    2.290206] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  2368. [    2.297127] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  2369. [    2.304047] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  2370. [    2.310966] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  2371. [    2.317886] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  2372. [    2.324814] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  2373. [    2.331767] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  2374. [    2.338649] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  2375. [    2.345568] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  2376. [    2.352487] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  2377. [    2.359407] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  2378. [    2.366329] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  2379. [    2.373248] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  2380. [    2.380167] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  2381. [    2.408553] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  2382. [    2.416024] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  2383. [    2.425106] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢ªêconsole [ttyPS0] enabled
  2384. [    2.434052] console [ttyPS0] enabled
  2385. [    2.441036] bootconsole [cdns0] disabled
  2386. [    2.441036] bootconsole [cdns0] disabled
  2387. [    2.449083] Unable to detect cache hierarchy from DT for CPU 0
  2388. [    2.459526] brd: module loaded
  2389. [    2.465345] loop: module loaded
  2390. [    2.469321] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  2391. [    2.478201] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  2392. [    2.488909] scsi host0: ahci-ceva
  2393. [    2.492322] scsi host1: ahci-ceva
  2394. [    2.495662] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  2395. [    2.503496] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  2396. [    2.511555] mtdoops: mtd device (mtddev=name/number) must be supplied
  2397. [    2.518891] zynqmp-qspi ff0f0000.spi: rx bus width not found
  2398. [    2.524820] m25p80 spi0.0: found n25q00, expected n25q512a
  2399. [    2.530521] m25p80 spi0.0: n25q00 (131072 Kbytes)
  2400. [    2.535154] 5 ofpart partitions found on MTD device spi0.0
  2401. [    2.540601] Creating 5 MTD partitions on "spi0.0":
  2402. [    2.545378] 0x000000000000-0x000000500000 : "boot"
  2403. [    2.550639] 0x000000500000-0x000000540000 : "bootenv"
  2404. [    2.556035] 0x000000540000-0x000002740000 : "kernel"
  2405. [    2.561326] 0x000002740000-0x000003740000 : "user"
  2406. [    2.566458] 0x000003740000-0x000003750000 : "test"
  2407. [    2.572466] libphy: Fixed MDIO Bus: probed
  2408. [    2.577585] tun: Universal TUN/TAP device driver, 1.6
  2409. [    2.582554] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  2410. [    2.588833] CAN device driver interface
  2411. [    2.593144] macb ff0c0000.ethernet: Not enabling partial store and forward
  2412. [    2.600444] libphy: MACB_mii_bus: probed
  2413. [    2.678987] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  2414. [    2.688732] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  2415. [    2.701322] usbcore: registered new interface driver asix
  2416. [    2.706687] usbcore: registered new interface driver ax88179_178a
  2417. [    2.712735] usbcore: registered new interface driver cdc_ether
  2418. [    2.718549] usbcore: registered new interface driver net1080
  2419. [    2.724191] usbcore: registered new interface driver cdc_subset
  2420. [    2.730092] usbcore: registered new interface driver zaurus
  2421. [    2.735660] usbcore: registered new interface driver cdc_ncm
  2422. [    2.741622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  2423. [    2.748064] ehci-pci: EHCI PCI platform driver
  2424. [    2.752716] usbcore: registered new interface driver uas
  2425. [    2.757975] usbcore: registered new interface driver usb-storage
  2426. [    2.764248] mousedev: PS/2 mouse device common for all mice
  2427. [    2.770150] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  2428. [    2.777320] i2c /dev entries driver
  2429. [    2.780949] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  2430. [    2.786995] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  2431. [    2.793767] usbcore: registered new interface driver uvcvideo
  2432. [    2.799423] USB Video Class driver (1.1.1)
  2433. [    2.803858] Bluetooth: HCI UART driver ver 2.3
  2434. [    2.808219] Bluetooth: HCI UART protocol H4 registered
  2435. [    2.813336] Bluetooth: HCI UART protocol BCSP registered
  2436. [    2.818630] Bluetooth: HCI UART protocol LL registered
  2437. [    2.823751] Bluetooth: HCI UART protocol ATH3K registered
  2438. [    2.827838] ata1: SATA link down (SStatus 0 SControl 330)
  2439. [    2.830423] ata2: SATA link down (SStatus 0 SControl 330)
  2440. [    2.839895] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2441. [    2.846181] Bluetooth: HCI UART protocol Intel registered
  2442. [    2.851563] Bluetooth: HCI UART protocol Broadcom registered
  2443. [    2.857170] Bluetooth: HCI UART protocol QCA registered
  2444. [    2.862413] usbcore: registered new interface driver bcm203x
  2445. [    2.868050] usbcore: registered new interface driver bpa10x
  2446. [    2.873605] usbcore: registered new interface driver bfusb
  2447. [    2.879074] usbcore: registered new interface driver btusb
  2448. [    2.884512] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  2449. [    2.890206] usbcore: registered new interface driver ath3k
  2450. [    2.895743] EDAC MC: ECC not enabled
  2451. [    2.899371] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  2452. [    2.908405] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  2453. [    2.920701] sdhci: Secure Digital Host Controller Interface driver
  2454. [    2.926791] sdhci: Copyright(c) Pierre Ossman
  2455. [    2.931130] sdhci-pltfm: SDHCI platform and OF driver helper
  2456. [    2.982724] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  2457. [    2.990845] ledtrig-cpu: registered to indicate activity on CPUs
  2458. [    2.996887] usbcore: registered new interface driver usbhid
  2459. [    3.002372] usbhid: USB HID core driver
  2460. [    3.007780] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  2461. [    3.014656] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  2462. [    3.021815] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  2463. [    3.029170] PLL: shutdown
  2464. [    3.032594] Write failed to divider address:fd1a007c
  2465. [    3.037628] PLL: enable
  2466. [    3.040155] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  2467. [    3.048194] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  2468. [    3.057859] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  2469. [    3.067721] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  2470. [    3.075148] pktgen: Packet Generator for packet performance testing. Version: 2.75
  2471. [    3.083316] Netfilter messages via NETLINK v0.30.
  2472. [    3.088063] ip_tables: (C) 2000-2006 Netfilter Core Team
  2473. [    3.093336] Initializing XFRM netlink socket
  2474. [    3.097663] NET: Registered protocol family 10
  2475. [    3.103496] ip6_tables: (C) 2000-2006 Netfilter Core Team
  2476. [    3.108845] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  2477. [    3.115078] NET: Registered protocol family 17
  2478. [    3.119447] NET: Registered protocol family 15
  2479. [    3.123874] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  2480. [    3.136797] Ebtables v2.0 registered
  2481. [    3.140410] can: controller area network core (rev 20120528 abi 9)
  2482. [    3.146552] NET: Registered protocol family 29
  2483. [    3.150946] can: raw protocol (rev 20120528)
  2484. [    3.155199] can: broadcast manager protocol (rev 20161123 t)
  2485. [    3.160843] can: netlink gateway (rev 20130117) max_hops=1
  2486. [    3.166486] Bluetooth: RFCOMM TTY layer initialized
  2487. [    3.171281] Bluetooth: RFCOMM socket layer initialized
  2488. [    3.176406] Bluetooth: RFCOMM ver 1.11
  2489. [    3.180129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2490. [    3.185421] Bluetooth: BNEP filters: protocol multicast
  2491. [    3.190633] Bluetooth: BNEP socket layer initialized
  2492. [    3.195579] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2493. [    3.201483] Bluetooth: HIDP socket layer initialized
  2494. [    3.206601] 9pnet: Installing 9P2000 support
  2495. [    3.210804] Key type dns_resolver registered
  2496. [    3.216999] registered taskstats version 1
  2497. [    3.221451] Btrfs loaded, crc32c=crc32c-generic
  2498. [    3.233100] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  2499. [    3.238535] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  2500. [    3.246430] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  2501. [    3.255086] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  2502. [    3.261158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2503. [    3.267862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2504. [    3.275061] usb usb1: Product: xHCI Host Controller
  2505. [    3.279921] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  2506. [    3.285215] usb usb1: SerialNumber: xhci-hcd.0.auto
  2507. [    3.292350] hub 1-0:1.0: USB hub found
  2508. [    3.299063] hub 1-0:1.0: 1 port detected
  2509. [    3.303035] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  2510. [    3.308444] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  2511. [    3.316115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  2512. [    3.324208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  2513. [    3.330920] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2514. [    3.338120] usb usb2: Product: xHCI Host Controller
  2515. [    3.342985] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  2516. [    3.348276] usb usb2: SerialNumber: xhci-hcd.0.auto
  2517. [    3.353344] hub 2-0:1.0: USB hub found
  2518. [    3.357032] hub 2-0:1.0: 1 port detected
  2519. [    3.361305] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  2520. [    3.369508] clk: Not disabling unused clocks
  2521. [    3.373694] ALSA device list:
  2522. [    3.376642]   #0: DisplayPort monitor
  2523. [    3.380916] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  2524. INIT: version 2.88 booting
  2525. Starting udev
  2526. [    3.493396] udevd[1613]: starting version 3.2
  2527. [    3.498031] random: udevd: uninitialized urandom read (16 bytes read)
  2528. [    3.504470] random: udevd: uninitialized urandom read (16 bytes read)
  2529. [    3.510886] random: udevd: uninitialized urandom read (16 bytes read)
  2530. [    3.517289] random: udevd: uninitialized urandom read (16 bytes read)
  2531. [    3.527353] udevd[1614]: starting eudev-3.2
  2532. [    3.571405] random: udevd: uninitialized urandom read (16 bytes read)
  2533. [    3.580850] random: udevd: uninitialized urandom read (16 bytes read)
  2534. [    3.606992] dsaxidma: loading out-of-tree module taints kernel.
  2535. [    3.607348] dsaxidma: loading out-of-tree module taints kernel.
  2536. [    3.608036] <dma1> init: registered
  2537. [    3.627739] <dma2> init: registered
  2538. Populating dev cache
  2539. [    4.099534] random: dd: uninitialized urandom read (512 bytes read)
  2540. Thu Jul 26 08:51:43 UTC 2018
  2541. Starting internet superserver: inetd.
  2542. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  2543. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  2544. INIT: Entering runlevel: 5
  2545. Hello World
  2546. [22]:0x12
  2547. [20]:0x201
  2548. [20]:0x201
  2549. [22]:0x1
  2550. [0]:0x140
  2551. [0]:0x140
  2552. Configuring network interfaces... [    4.399996] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2553. done.
  2554. Starting Dropbear SSH server: [    4.429409] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2555. [    4.439314] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2556. Generating key, this may take a while...
  2557. [    5.426827] macb ff0c0000.ethernet eth0: link up (1000/Full)
  2558. [    5.432428] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2559. [    5.708040] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2560. Public key portion is:
  2561. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDXesycGlkGPeZc7t79lfHkI9rBmw4sx8AEdnBfbWYPMy+19b2IJCyuF5AWtzzTCrQDYgNZftW762IlT1u92LRj551kY1AlcXRpT0CGefMAG3r/Qt3f6eafYm+OdPie2oFZy/rrY0a8a5EMMus6WKgam6f51Pn0rWJMrhoIi+sp+J46Tn9Ud9Bbf7SQlaPWpqXC/gM/kyXgImdQByClcQ6eecGBuNTEHx6X78LpryTcwtzLK20dAwyxLue3quFBJ8fJEL3z012nJ4doLWcDIPAeyD9I41h8lSq9c2YLTijXWda4aGdSoZaP9l+/wpc8uk318UvThSi3a7f6i0AcJXAX root@VP88x_2017_3_PRJ0191
  2562. Fingerprint: md5 2f:cc:d9:e7:c0:fe:3b:ed:9f:b1:49:bd:1f:ad:b2:96
  2563. dropbear.
  2564. Starting syslogd/klogd: done
  2565. [    5.763586] random: fast init done
  2566. [    6.217028] random: crng init done
  2567. [    8.008636] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  2568. hello world.....
  2569. Starting tcf-agent: OK
  2570.  
  2571. root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
  2572. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2573. ^C
  2574. --- 192.168.1.20 ping statistics ---
  2575. 2 packets transmitted, 0 packets received, 100% packet loss
  2576. root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
  2577. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2578. ^C
  2579. --- 192.168.1.20 ping statistics ---
  2580. 9 packets transmitted, 0 packets received, 100% packet loss
  2581. root@VP88x_2017_3_PRJ0191:~# ifconfig
  2582. eth0      Link encap:Ethernet  HWaddr 00:0A:35:00:22:01
  2583.           inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
  2584.           inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
  2585.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  2586.           RX packets:86 errors:0 dropped:0 overruns:0 frame:0
  2587.           TX packets:65 errors:0 dropped:0 overruns:0 carrier:0
  2588.           collisions:0 txqueuelen:1000
  2589.           RX bytes:11317 (11.0 KiB)  TX bytes:13095 (12.7 KiB)
  2590.           Interrupt:30
  2591.  
  2592. lo        Link encap:Local Loopback
  2593.           inet addr:127.0.0.1  Mask:255.0.0.0
  2594.           inet6 addr: ::1%4879712/128 Scope:Host
  2595.           UP LOOPBACK RUNNING  MTU:65536  Metric:1
  2596.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  2597.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  2598.           collisions:0 txqueuelen:1
  2599.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
  2600.  
  2601. root@VP88x_2017_3_PRJ0191:~# ifconfig
  2602. eth0      Link encap:Ethernet  HWaddr 00:0A:35:00:22:01
  2603.           inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
  2604.           inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
  2605.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  2606.           RX packets:108 errors:0 dropped:0 overruns:0 frame:0
  2607.           TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
  2608.           collisions:0 txqueuelen:1000
  2609.           RX bytes:15741 (15.3 KiB)  TX bytes:15714 (15.3 KiB)
  2610.           Interrupt:30
  2611.  
  2612. lo        Link encap:Local Loopback
  2613.           inet addr:127.0.0.1  Mask:255.0.0.0
  2614.           inet6 addr: ::1%4879712/128 Scope:Host
  2615.           UP LOOPBACK RUNNING  MTU:65536  Metric:1
  2616.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  2617.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  2618.           collisions:0 txqueuelen:1
  2619.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
  2620.  
  2621. root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
  2622. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2623. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.662 ms
  2624. 64 bytes from 192.168.1.20: seq=1 ttl=128 time=0.436 ms
  2625. ^C
  2626. --- 192.168.1.20 ping statistics ---
  2627. 2 packets transmitted, 2 packets received, 0% packet loss
  2628. round-trip min/avg/max = 0.436/0.549/0.662 ms
  2629. root@VP88x_2017_3_PRJ0191:~#
  2630.  
  2631.  
  2632. [   13.038763] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  2633. [   13.045056] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
  2634. [   13.051850] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
  2635. [   13.058572] ata1.00: configured for UDMA/133
  2636. [   13.063058] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk SATA Sl 25   PQ: 0 ANSI: 5
  2637. [   13.111049] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
  2638. [   13.118623] sd 0:0:0:0: [sda] Write Protect is off
  2639. [   13.123374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  2640. [   13.133141]  sda: sda1
  2641. [   13.135911] sd 0:0:0:0: [sda] Attached SCSI disk
  2642. [   13.140632] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  2643. INIT: version 2.88 booting
  2644. Starting udev
  2645. [   13.252613] udevd[1623]: starting version 3.2
  2646. [   13.257341] random: udevd: uninitialized urandom read (16 bytes read)
  2647. [   13.263811] random: udevd: uninitialized urandom read (16 bytes read)
  2648. [   13.270227] random: udevd: uninitialized urandom read (16 bytes read)
  2649. [   13.276619] random: udevd: uninitialized urandom read (16 bytes read)
  2650. [   13.286696] udevd[1624]: starting eudev-3.2
  2651. [   13.330715] random: udevd: uninitialized urandom read (16 bytes read)
  2652. [   13.349023] random: udevd: uninitialized urandom read (16 bytes read)
  2653. [   13.362345] dsaxidma: loading out-of-tree module taints kernel.
  2654. [   13.362401] dsaxidma: loading out-of-tree module taints kernel.
  2655. [   13.363238] <dma1> init: registered
  2656. [   13.383594] <dma2> init: registered
  2657. Populating dev cache
  2658. [   13.914247] random: dd: uninitialized urandom read (512 bytes read)
  2659. Thu Jul 26 08:51:43 UTC 2018
  2660. Starting internet superserver: inetd.
  2661. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  2662. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  2663. INIT: Entering runlevel: 5
  2664. Hello World
  2665. [22]:0x12
  2666. [20]:0x201
  2667. [20]:0x201
  2668. [22]:0x1
  2669. [0]:0x140
  2670. [0]:0x140
  2671. Configuring network interfaces... [   14.212935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2672. done.
  2673. Starting Dropbear SSH server: [   14.242153] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2674. [   14.252269] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2675. Generating key, this may take a while...
  2676. [   15.250869] macb ff0c0000.ethernet eth0: link up (1000/Full)
  2677. [   15.256471] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2678. [   15.314899] random: dropbearkey: uninitialized urandom read (32 bytes read)
  2679. Public key portion is:
  2680. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC1QlQ/NUvyL4v4heph5BlEw4+Ik24DDrawaqpccEwqaO8VnAVGdWszsKRZwPhNDl13kmFR7mJr0QQsYNVO3uy7YIez7u1giF7UqO4zpAVlCav8FTa7l57ZITFMhzRp37e9xORsUBW9BF5LKcEIE34lmfqgOuSG69Fd2qjmNaEAzoZn9bv1lSRNVEN3MdPvhOVsyaMulfOYA5jrxuixi7ou+uQvS7ya0dSM191Lre5eemFUIpz44V4+4cMLLcwO0Swf7nxHlNUpbfwcpoN3Wv2IxmNocI7wuaQtVCROscp/jQJdZ2FYgQiz4rE5hO/5HLT0r4rzg2onuQMbTBaAjND7 root@VP88x_2017_3_PRJ0191
  2681. Fingerprint: md5 f4:76:f4:77:a9:50:9f:16:ef:b2:4e:10:a0:[   15.367433] random: fast init done
  2682. 32:f5:63
  2683. dropbear.
  2684. Starting syslogd/klogd: done
  2685. [   15.795068] random: crng init done
  2686. [   17.491233] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  2687. hello world.....
  2688. Starting tcf-agent: OK
  2689.  
  2690. root@VP88x_2017_3_PRJ0191:~#
  2691. root@VP88x_2017_3_PRJ0191:~#
  2692. root@VP88x_2017_3_PRJ0191:~#
  2693. root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.10
  2694. PING 192.168.1.10 (192.168.1.10): 56 data bytes
  2695. 64 bytes from 192.168.1.10: seq=0 ttl=64 time=0.172 ms
  2696. ^C
  2697. --- 192.168.1.10 ping statistics ---
  2698. 1 packets transmitted, 1 packets received, 0% packet loss
  2699. round-trip min/avg/max = 0.172/0.172/0.172 ms
  2700. root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
  2701. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2702. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.540 ms
  2703. ^C
  2704. --- 192.168.1.20 ping statistics ---
  2705. 1 packets transmitted, 1 packets received, 0% packet loss
  2706. round-trip min/avg/max = 0.540/0.540/0.540 ms
  2707. root@VP88x_2017_3_PRJ0191:~# ls /run/media/sda1/
  2708. $RECYCLE.BIN/              xxx.txt
  2709. System Volume Information/
  2710. root@VP88x_2017_3_PRJ0191:~# cat /run/media/sda1/xxx.txt
  2711. sdfsdfroot@VP88x_2017_3_PRJ0191:~# ./dia^C
  2712. root@VP88x_2017_3_PRJ0191:~# cd /tmp
  2713. root@VP88x_2017_3_PRJ0191:/tmp# chmod +x *
  2714. root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
  2715. enter number of cyclic (0 - for infinite)
  2716. 1
  2717. SPI1 result = 0  SUCCESS
  2718. An error occured while opening PCIe device /dev/vp880-0
  2719. FDSP_ErrorFunction:_4FM_OpenDevice
  2720. FDSP_ErrorCode:-3
  2721. FDSP_ErrorMessage:No device found
  2722. PCIe result = -1  FAILED
  2723.  
  2724. --- AMS zynq PS System monitor---
  2725. temperature ps 61.64C
  2726. vcc_psintlp    0.87V
  2727. vcc_psintfp    0.87V
  2728. vcc_psaux      1.81V
  2729. vcc_psddr_504  1.21V
  2730. vcc_psio3_503  3.24V
  2731. vcc_psio0_500  3.24V
  2732. vcc_psio1_501  1.80V
  2733. vcc_psio2_502  1.80V
  2734. vcc_psmgtravcc 0.87V
  2735. vcc_psmgtravtt 1.81V
  2736. ---------------------------------
  2737.  
  2738. --- AMS zynq PL System monitor---
  2739. temperature pl 57.66C
  2740. vcc_int        0.87V
  2741. vcc_aux        1.81V
  2742. vcc_bram       0.87V
  2743. vcc_psintlp    0.87V
  2744. vcc_psintfp    0.87V
  2745. vcc_psaux      1.81V
  2746. vcc_vuser1     0.00V
  2747. vcc_vuser2     0.00V
  2748. vcc_vuser3     0.00V
  2749. vcc_vuser4     0.00V
  2750. ---------------------------------
  2751. ranran.............temperature         31 C
  2752. vmon_fmc_vadj       1.79V
  2753. vmon_fmc_viob       1.79V
  2754. vmon_sblast_vcore   1.64V
  2755. vmon_sblast_vio     1.48V
  2756. vmon_2v5_mgt_refclk 2.44V
  2757. vmon_3v3_mgt_refclk 3.22V
  2758. vmon_1v2            1.18V
  2759. vmon_1v4            1.40V
  2760. vmon_vaux           3.31V
  2761. VPX_SYS_RST_N       :1
  2762. PS_ERROR_STATUS     :1
  2763. PS_ERROR_OUT        :1
  2764. PS_INIT_B           :1
  2765. PS_DONE             :1
  2766. INIT_B              :1
  2767. DONE                :1
  2768. FLASH_A26           :1
  2769. HSC_12V_PG          :1
  2770. HSC_5V_PG           :1
  2771. VPX_GAP             :1
  2772. VPX_GA4             :1
  2773. VPX_GA3             :1
  2774. VPX_GA2             :1
  2775. VPX_GA1             :1
  2776. VPX_GA0             :1
  2777. PG_LED_N            :1
  2778. ZYNQ_CONFDONE_LED   :1
  2779. FPGA_CONFDONE_LED   :1
  2780. FMC_VADJ_VS0        :1
  2781. FMC_VADJ_VS1        :1
  2782. FMC_VADJ_VS2        :1
  2783. VADJ_FMC_EN_L       :1
  2784. FMC_BYPASS          :1
  2785. HSC_ON              :1
  2786. HSC_3V3_PG          :1
  2787. PG_C2M_3V3          :1
  2788. MGT_PG              :1
  2789. DDR4_VTT_PG         :1
  2790. DDR4_PG             :1
  2791. PG_FPGA_CORE        :1
  2792. 1V8_LOC_2V5_VPP_PG  :1
  2793. HSC Source channel 1     3.250V
  2794. HSC Source channel 2     5.031V
  2795. HSC ADIN channel 1       0.423V
  2796. HSC ADIN channel 2       0.423V
  2797. HSC Sense channel 1      14.688mV
  2798. HSC Current channel 1    2.938A
  2799. HSC Sense channel 2      2.688mV
  2800. HSC Current channel 2    0.896A
  2801. HSC Power channel 1      9.547W
  2802. HSC Power channel 2      4.507W
  2803. ---------------------------------------------------
  2804. HSC Source channel 1     2.500V
  2805. HSC Source channel 2     11.906V
  2806. HSC ADIN channel 1       0.423V
  2807. HSC ADIN channel 2       0.423V
  2808. HSC Sense channel 1      0.000mV
  2809. HSC Current channel 1    0.000A
  2810. HSC Sense channel 2      4.562mV
  2811. HSC Current channel 2    0.913A
  2812. HSC Power channel 1      0.000W
  2813. HSC Power channel 2      10.864W
  2814. ---------------------------------------------------
  2815. HOSTIF version 1.0.0.5
  2816. fpga disabled
  2817. MMC result =SUCCESS
  2818. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  2819. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.457 ms
  2820.  
  2821. --- 192.168.1.20 ping statistics ---
  2822. 1 packets transmitted, 1 packets received, 0% packet loss
  2823. round-trip min/avg/max = 0.457/0.457/0.457 ms
  2824. Ethernet result = 0  SUCCESS
  2825. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  2826.  
  2827. unitapi_auto_config returned -50
  2828.  
  2829. Invalid device handle '1'
  2830. Press a key to exit the application
  2831. FMC result = -2  FAILED
  2832. memory test: OK
  2833. Memory result = 0  SUCCESS
  2834. DISK: OK
  2835. DISK result = 0 SUCCESS
  2836. FLASH: OK
  2837. FLASH result = 0 SUCCESS
  2838. read returned 9
  2839. RFFE result = 0 SUCCESS
  2840. root@VP88x_2017_3_PRJ0191:/tmp#
  2841. root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf ^C
  2842. root@VP88x_2017_3_PRJ0191:/tmp# lspci
  2843. .automount-sda1  diagnostic.elf
  2844. root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
  2845. lspci: invalid option -- '-'
  2846. Usage: lspci [<switches>]
  2847.  
  2848. Basic display modes:
  2849. -mm             Produce machine-readable output (single -m for an obsolete format)
  2850. -t              Show bus tree
  2851.  
  2852. Display options:
  2853. -v              Be verbose (-vv for very verbose)
  2854. -k              Show kernel drivers handling each device
  2855. -x              Show hex-dump of the standard part of the config space
  2856. -xxx            Show hex-dump of the whole config space (dangerous; root only)
  2857. -xxxx           Show hex-dump of the 4096-byte extended config space (root only)
  2858. -b              Bus-centric view (addresses and IRQ's as seen by the bus)
  2859. -D              Always show domain numbers
  2860.  
  2861. Resolving of device ID's to names:
  2862. -n              Show numeric ID's
  2863. -nn             Show both textual and numeric ID's (names & numbers)
  2864. -q              Query the PCI ID database for unknown ID's via DNS
  2865. -qq             As above, but re-query locally cached entries
  2866. -Q              Query the PCI ID database for all ID's via DNS
  2867.  
  2868. Selection of devices:
  2869. -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]   Show only devices in selected slots
  2870. -d [<vendor>]:[<device>][:<class>]              Show only devices with specified ID's
  2871.  
  2872. Other options:
  2873. -i <file>       Use specified ID database instead of /usr/share/pci.ids.gz
  2874. -p <file>       Look up kernel modules in a given file instead of default modules.pcimap
  2875. -M              Enable `bus mapping' mode (dangerous; root only)
  2876.  
  2877. PCI access options:
  2878. -A <method>     Use the specified PCI access method (see `-A help' for a list)
  2879. -O <par>=<val>  Set PCI access parameter (see `-O help' for a list)
  2880. -G              Enable PCI access debugging
  2881. -F <file>       Read PCI configuration dump from a given file
  2882. root@VP88x_2017_3_PRJ0191:/tmp# lspci -vvv
  2883. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  2884.         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  2885.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  2886.         Interrupt: pin A routed to IRQ 255
  2887.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  2888.         I/O behind bridge: 00000000-00000fff
  2889.         Memory behind bridge: fff00000-000fffff
  2890.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  2891.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  2892.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  2893.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  2894.         Capabilities: [40] Power Management version 3
  2895.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  2896.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  2897.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  2898.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  2899.                         ExtTag- RBE+
  2900.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  2901.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  2902.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  2903.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  2904.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  2905.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  2906.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  2907.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  2908.                 LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
  2909.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  2910.                 RootCap: CRSVisible+
  2911.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  2912.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  2913.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  2914.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  2915.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  2916.                          Compliance De-emphasis: -6dB
  2917.                 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  2918.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  2919.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  2920.         Capabilities: [10c v1] Virtual Channel
  2921.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  2922.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  2923.                 Ctrl:   ArbSelect=Fixed
  2924.                 Status: InProgress-
  2925.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  2926.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  2927.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  2928.                         Status: NegoPending- InProgress-
  2929.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  2930.  
  2931. root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
  2932. lspci: invalid option -- '-'
  2933. Usage: lspci [<switches>]
  2934.  
  2935. Basic display modes:
  2936. -mm             Produce machine-readable output (single -m for an obsolete format)
  2937. -t              Show bus tree
  2938.  
  2939. Display options:
  2940. -v              Be verbose (-vv for very verbose)
  2941. -k              Show kernel drivers handling each device
  2942. -x              Show hex-dump of the standard part of the config space
  2943. -xxx            Show hex-dump of the whole config space (dangerous; root only)
  2944. -xxxx           Show hex-dump of the 4096-byte extended config space (root only)
  2945. -b              Bus-centric view (addresses and IRQ's as seen by the bus)
  2946. -D              Always show domain numbers
  2947.  
  2948. Resolving of device ID's to names:
  2949. -n              Show numeric ID's
  2950. -nn             Show both textual and numeric ID's (names & numbers)
  2951. -q              Query the PCI ID database for unknown ID's via DNS
  2952. -qq             As above, but re-query locally cached entries
  2953. -Q              Query the PCI ID database for all ID's via DNS
  2954.  
  2955. Selection of devices:
  2956. -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]   Show only devices in selected slots
  2957. -d [<vendor>]:[<device>][:<class>]              Show only devices with specified ID's
  2958.  
  2959. Other options:
  2960. -i <file>       Use specified ID database instead of /usr/share/pci.ids.gz
  2961. -p <file>       Look up kernel modules in a given file instead of default modules.pcimap
  2962. -M              Enable `bus mapping' mode (dangerous; root only)
  2963.  
  2964. PCI access options:
  2965. -A <method>     Use the specified PCI access method (see `-A help' for a list)
  2966. -O <par>=<val>  Set PCI access parameter (see `-O help' for a list)
  2967. -G              Enable PCI access debugging
  2968. -F <file>       Read PCI configuration dump from a given file
  2969. root@VP88x_2017_3_PRJ0191:/tmp# lspci -k
  2970. 00:00.0 PCI bridge: Xilinx Corporation Device d024
  2971. root@VP88x_2017_3_PRJ0191:/tmp# lspci
  2972. 00:00.0 PCI bridge: Xilinx Corporation Device d024
  2973. root@VP88x_2017_3_PRJ0191:/tmp#
  2974. root@VP88x_2017_3_PRJ0191:/tmp#
  2975. root@VP88x_2017_3_PRJ0191:/tmp#
  2976. root@VP88x_2017_3_PRJ0191:/tmp# lspci --help
  2977. lspci: invalid option -- '-'
  2978. Usage: lspci [<switches>]
  2979.  
  2980. Basic display modes:
  2981. -mm             Produce machine-readable output (single -m for an obsolete format)
  2982. -t              Show bus tree
  2983.  
  2984. Display options:
  2985. -v              Be verbose (-vv for very verbose)
  2986. -k              Show kernel drivers handling each device
  2987. -x              Show hex-dump of the standard part of the config space
  2988. -xxx            Show hex-dump of the whole config space (dangerous; root only)
  2989. -xxxx           Show hex-dump of the 4096-byte extended config space (root only)
  2990. -b              Bus-centric view (addresses and IRQ's as seen by the bus)
  2991. -D              Always show domain numbers
  2992.  
  2993. Resolving of device ID's to names:
  2994. -n              Show numeric ID's
  2995. -nn             Show both textual and numeric ID's (names & numbers)
  2996. -q              Query the PCI ID database for unknown ID's via DNS
  2997. -qq             As above, but re-query locally cached entries
  2998. -Q              Query the PCI ID database for all ID's via DNS
  2999.  
  3000. Selection of devices:
  3001. -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]   Show only devices in selected slots
  3002. -d [<vendor>]:[<device>][:<class>]              Show only devices with specified ID's
  3003.  
  3004. Other options:
  3005. -i <file>       Use specified ID database instead of /usr/share/pci.ids.gz
  3006. -p <file>       Look up kernel modules in a given file instead of default modules.pcimap
  3007. -M              Enable `bus mapping' mode (dangerous; root only)
  3008.  
  3009. PCI access options:
  3010. -A <method>     Use the specified PCI access method (see `-A help' for a list)
  3011. -O <par>=<val>  Set PCI access parameter (see `-O help' for a list)
  3012. -G              Enable PCI access debugging
  3013. -F <file>       Read PCI configuration dump from a given file
  3014. root@VP88x_2017_3_PRJ0191:/tmp# lspci -xxx
  3015. 00:00.0 PCI bridge: Xilinx Corporation Device d024
  3016. 00: ee 10 24 d0 00 00 10 00 00 00 04 06 00 00 01 00
  3017. 10: 00 00 00 00 00 00 00 00 00 01 0c 00 00 00 00 00
  3018. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  3019. 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
  3020. 40: 01 60 03 78 08 00 00 00 00 00 00 00 00 00 00 00
  3021. 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3022. 60: 10 00 42 00 01 80 00 00 10 28 20 00 22 f0 63 00
  3023. 70: 00 00 21 10 00 00 00 00 00 00 40 00 10 00 01 00
  3024. 80: 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00
  3025. 90: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
  3026. a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3027. b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3028. c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3029. d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3030. e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3031. f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  3032.  
  3033. root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
  3034. lspci: invalid option -- '-'
  3035. Usage: lspci [<switches>]
  3036.  
  3037. Basic display modes:
  3038. -mm             Produce machine-readable output (single -m for an obsolete format)
  3039. -t              Show bus tree
  3040.  
  3041. Display options:
  3042. -v              Be verbose (-vv for very verbose)
  3043. -k              Show kernel drivers handling each device
  3044. -x              Show hex-dump of the standard part of the config space
  3045. -xxx            Show hex-dump of the whole config space (dangerous; root only)
  3046. -xxxx           Show hex-dump of the 4096-byte extended config space (root only)
  3047. -b              Bus-centric view (addresses and IRQ's as seen by the bus)
  3048. -D              Always show domain numbers
  3049.  
  3050. Resolving of device ID's to names:
  3051. -n              Show numeric ID's
  3052. -nn             Show both textual and numeric ID's (names & numbers)
  3053. -q              Query the PCI ID database for unknown ID's via DNS
  3054. -qq             As above, but re-query locally cached entries
  3055. -Q              Query the PCI ID database for all ID's via DNS
  3056.  
  3057. Selection of devices:
  3058. -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]   Show only devices in selected slots
  3059. -d [<vendor>]:[<device>][:<class>]              Show only devices with specified ID's
  3060.  
  3061. Other options:
  3062. -i <file>       Use specified ID database instead of /usr/share/pci.ids.gz
  3063. -p <file>       Look up kernel modules in a given file instead of default modules.pcimap
  3064. -M              Enable `bus mapping' mode (dangerous; root only)
  3065.  
  3066. PCI access options:
  3067. -A <method>     Use the specified PCI access method (see `-A help' for a list)
  3068. -O <par>=<val>  Set PCI access parameter (see `-O help' for a list)
  3069. -G              Enable PCI access debugging
  3070. -F <file>       Read PCI configuration dump from a given file
  3071. root@VP88x_2017_3_PRJ0191:/tmp# lspci -vvv
  3072. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  3073.         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  3074.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  3075.         Interrupt: pin A routed to IRQ 255
  3076.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  3077.         I/O behind bridge: 00000000-00000fff
  3078.         Memory behind bridge: fff00000-000fffff
  3079.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  3080.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  3081.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  3082.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  3083.         Capabilities: [40] Power Management version 3
  3084.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  3085.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  3086.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  3087.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  3088.                         ExtTag- RBE+
  3089.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  3090.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  3091.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  3092.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  3093.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  3094.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  3095.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  3096.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  3097.                 LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
  3098.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  3099.                 RootCap: CRSVisible+
  3100.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  3101.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  3102.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  3103.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  3104.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  3105.                          Compliance De-emphasis: -6dB
  3106.                 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  3107.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  3108.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  3109.         Capabilities: [10c v1] Virtual Channel
  3110.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  3111.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  3112.                 Ctrl:   ArbSelect=Fixed
  3113.                 Status: InProgress-
  3114.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  3115.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  3116.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  3117.                         Status: NegoPending- InProgress-
  3118.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  3119.  
  3120. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/
  3121. block/    class/    devices/  fs/       module/
  3122. bus/      dev/      firmware/ kernel/
  3123. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/
  3124. block/    class/    devices/  fs/       module/
  3125. bus/      dev/      firmware/ kernel/
  3126. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/p
  3127. pci/      platform/
  3128. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/p
  3129. pci/      platform/
  3130. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/
  3131. devices/            drivers_probe       slots/
  3132. drivers/            rescan              uevent
  3133. drivers_autoprobe   resource_alignment
  3134. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0
  3135. 0000:00:00.0/
  3136. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0
  3137. 0000:00:00.0/
  3138. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0/
  3139. broken_parity_status      enable                    rescan
  3140. class                     irq                       resource
  3141. config                    local_cpulist             subsystem/
  3142. consistent_dma_mask_bits  local_cpus                subsystem_device
  3143. device                    modalias                  subsystem_vendor
  3144. devspec                   msi_bus                   uevent
  3145. dma_mask_bits             pci_bus/                  vendor
  3146. driver_override           remove
  3147. root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0/
  3148. broken_parity_status      enable                    rescan
  3149. class                     irq                       resource
  3150. config                    local_cpulist             subsystem/
  3151. consistent_dma_mask_bits  local_cpus                subsystem_device
  3152. device                    modalias                  subsystem_vendor
  3153. devspec                   msi_bus                   uevent
  3154. dma_mask_bits             pci_bus/                  vendor
  3155. driver_override           remove
  3156. root@VP88x_2017_3_PRJ0191:/tmp# Xilinx Zynq MP First Stage Boot Loader nfig
  3157. Release 2017.3   May 24 2018  -  10:35:53
  3158. Marvell PHY reset
  3159. SI5338 0x70 not configured
  3160. SI5338 0x70 configuration finished
  3161. SI5338 0x71 not configured
  3162. SI5338 0x71 configuration finished
  3163.  
  3164.  
  3165. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  3166.  
  3167. I2C:   ready
  3168. DRAM:  2 GiB
  3169. EL Level:       EL2
  3170. Chip ID:        xczu3eg
  3171. MMC:   Card did not respond to voltage select!
  3172. sdhci@ff160000 - probe failed: -95
  3173. Card did not respond to voltage select!
  3174.  
  3175. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  3176. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  3177. *** Warning - bad CRC, using default environment
  3178.  
  3179. In:    serial
  3180. Out:   serial
  3181. Err:   serial
  3182. Bootmode: QSPI_MODE
  3183. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  3184. eth0: ethernet@ff0c0000
  3185. U-BOOT for VP88x_2017_3_PRJ0191
  3186.  
  3187. Hit any key to stop autoboot:  0
  3188. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  3189. device 0 offset 0x540000, size 0x2200000
  3190. SF: 35651584 bytes @ 0x540000 Read: OK
  3191. ## Loading kernel from FIT Image at 10000000 ...
  3192.    Using 'conf@1' configuration
  3193.    Trying 'kernel@0' kernel subimage
  3194.      Description:  Linux Kernel
  3195.      Type:         Kernel Image
  3196.      Compression:  uncompressed
  3197.      Data Start:   0x100000d8
  3198.      Data Size:    12503552 Bytes = 11.9 MiB
  3199.      Architecture: AArch64
  3200.      OS:           Linux
  3201.      Load Address: 0x00080000
  3202.      Entry Point:  0x00080000
  3203.      Hash algo:    sha1
  3204.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  3205.    Verifying Hash Integrity ... sha1+ OK
  3206. ## Loading ramdisk from FIT Image at 10000000 ...
  3207.    Using 'conf@1' configuration
  3208.    Trying 'ramdisk@0' ramdisk subimage
  3209.      Description:  ramdisk
  3210.      Type:         RAMDisk Image
  3211.      Compression:  uncompressed
  3212.      Data Start:   0x10bf54e4
  3213.      Data Size:    8973721 Bytes = 8.6 MiB
  3214.      Architecture: AArch64
  3215.      OS:           Linux
  3216.      Load Address: unavailable
  3217.      Entry Point:  unavailable
  3218.      Hash algo:    sha1
  3219.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  3220.    Verifying Hash Integrity ... sha1+ OK
  3221. ## Loading fdt from FIT Image at 10000000 ...
  3222.    Using 'conf@1' configuration
  3223.    Trying 'fdt@0' fdt subimage
  3224.      Description:  Flattened Device Tree blob
  3225.      Type:         Flat Device Tree
  3226.      Compression:  uncompressed
  3227.      Data Start:   0x10becbd0
  3228.      Data Size:    34910 Bytes = 34.1 KiB
  3229.      Architecture: AArch64
  3230.      Hash algo:    sha1
  3231.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  3232.    Verifying Hash Integrity ... sha1+ OK
  3233.    Booting using the fdt blob at 0x10becbd0
  3234.    Loading Kernel Image ... OK
  3235.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  3236.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  3237.  
  3238. Starting kernel ...
  3239.  
  3240. [    0.000000] Booting Linux on physical CPU 0x0
  3241. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  3242. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  3243. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  3244. [    0.000000] bootconsole [cdns0] enabled
  3245. [    0.000000] efi: Getting EFI parameters from FDT:
  3246. [    0.000000] efi: UEFI not found.
  3247. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  3248. [    0.000000] psci: probing for conduit method from DT.
  3249. [    0.000000] psci: PSCIv1.0 detected in firmware.
  3250. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  3251. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  3252. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  3253. [    0.000000] Detected VIPT I-cache on CPU0
  3254. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  3255. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  3256. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  3257. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  3258. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  3259. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  3260. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  3261. [    0.000000] Virtual kernel memory layout:
  3262. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  3263. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  3264. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  3265. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  3266. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  3267. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  3268. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  3269. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  3270. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  3271. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  3272. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  3273. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  3274. [    0.000000] Hierarchical RCU implementation.
  3275. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  3276. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  3277. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  3278. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  3279. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  3280. [    0.000000] GIC: Using split EOI/Deactivate mode
  3281. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  3282. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  3283. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  3284. [    0.008251] Console: colour dummy device 80x25
  3285. [    0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  3286. [    0.022877] pid_max: default: 32768 minimum: 301
  3287. [    0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  3288. [    0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  3289. [    0.041856] ASID allocator initialised with 65536 entries
  3290. [    0.047552] zynqmp_plat_init Power management API v0.3
  3291. [    0.052570] EFI services will not be available.
  3292. [    0.057332] Detected VIPT I-cache on CPU1
  3293. [    0.057365] CPU1: Booted secondary processor [410fd034]
  3294. [    0.057626] Detected VIPT I-cache on CPU2
  3295. [    0.057642] CPU2: Booted secondary processor [410fd034]
  3296. [    0.057892] Detected VIPT I-cache on CPU3
  3297. [    0.057909] CPU3: Booted secondary processor [410fd034]
  3298. [    0.057941] Brought up 4 CPUs
  3299. [    0.088228] SMP: Total of 4 processors activated.
  3300. [    0.092904] CPU features: detected feature: 32-bit EL0 Support
  3301. [    0.098700] CPU: All CPU(s) started at EL2
  3302. [    0.102773] alternatives: patching kernel code
  3303. [    0.108033] devtmpfs: initialized
  3304. [    0.115567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  3305. [    0.136597] xor: measuring software checksum speed
  3306. [    0.181269]    8regs     :  2542.000 MB/sec
  3307. [    0.221294]    8regs_prefetch:  2266.000 MB/sec
  3308. [    0.265656]    32regs    :  3125.000 MB/sec
  3309. [    0.305683]    32regs_prefetch:  2627.000 MB/sec
  3310. [    0.310104] xor: using function: 32regs (3125.000 MB/sec)
  3311. [    0.315557] pinctrl core: initialized pinctrl subsystem
  3312. [    0.321239] NET: Registered protocol family 16
  3313. [    0.326328] Failed to initialise IOMMU /amba/smmu@fd800000
  3314. [    0.331829] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  3315. [    0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  3316. [    0.374311] DMA: preallocated 65536 KiB pool for atomic allocations
  3317. [    0.390724] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  3318. [    0.398200] ARM CCI_400_r1 PMU driver probed[    0.404972] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  3319. [    0.431691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  3320. [    0.504960] raid6: int64x1  gen()   447 MB/s
  3321. [    0.576917] raid6: int64x1  xor()   485 MB/s
  3322. [    0.648953] raid6: int64x2  gen()   741 MB/s
  3323. [    0.721006] raid6: int64x2  xor()   661 MB/s
  3324. [    0.793052] raid6: int64x4  gen()  1086 MB/s
  3325. [    0.865097] raid6: int64x4  xor()   812 MB/s
  3326. [    0.937129] raid6: int64x8  gen()  1265 MB/s
  3327. [    1.009184] raid6: int64x8  xor()   824 MB/s
  3328. [    1.081198] raid6: neonx1   gen()   796 MB/s
  3329. [    1.153246] raid6: neonx1   xor()   837 MB/s
  3330. [    1.225283] raid6: neonx2   gen()  1285 MB/s
  3331. [    1.297346] raid6: neonx2   xor()  1143 MB/s
  3332. [    1.369387] raid6: neonx4   gen()  1666 MB/s
  3333. [    1.441431] raid6: neonx4   xor()  1299 MB/s
  3334. [    1.513488] raid6: neonx8   gen()  1753 MB/s
  3335. [    1.585507] raid6: neonx8   xor()  1348 MB/s
  3336. [    1.589586] raid6: using algorithm neonx8 gen() 1753 MB/s
  3337. [    1.594948] raid6: .... xor() 1348 MB/s, rmw enabled
  3338. [    1.599879] raid6: using intx1 recovery algorithm
  3339. [    1.605035] Write failed gate address:1000f02
  3340. [    1.612971] SCSI subsystem initialized
  3341. [    1.616762] usbcore: registered new interface driver usbfs
  3342. [    1.622084] usbcore: registered new interface driver hub
  3343. [    1.627369] usbcore: registered new device driver usb
  3344. [    1.632416] media: Linux media interface: v0.10
  3345. [    1.636865] Linux video capture interface: v2.00
  3346. [    1.641450] pps_core: LinuxPPS API ver. 1 registered
  3347. [    1.646356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  3348. [    1.655450] PTP clock support registered
  3349. [    1.659349] EDAC MC: Ver: 3.0.0
  3350. [    1.662713] FPGA manager framework
  3351. [    1.666067] fpga-region fpga-full: FPGA Region probed
  3352. [    1.671063] Advanced Linux Sound Architecture Driver Initialized.
  3353. [    1.677320] Bluetooth: Core ver 2.22
  3354. [    1.680721] NET: Registered protocol family 31
  3355. [    1.685117] Bluetooth: HCI device and connection manager initialized
  3356. [    1.691436] Bluetooth: HCI socket layer initialized
  3357. [    1.696278] Bluetooth: L2CAP socket layer initialized
  3358. [    1.701311] Bluetooth: SCO socket layer initialized
  3359. [    1.706702] clocksource: Switched to clocksource arch_sys_counter
  3360. [    1.712694] VFS: Disk quotas dquot_6.6.0
  3361. [    1.716533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  3362. [    1.726796] NET: Registered protocol family 2
  3363. [    1.731344] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  3364. [    1.738462] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  3365. [    1.745250] TCP: Hash tables configured (established 16384 bind 16384)
  3366. [    1.751641] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  3367. [    1.757578] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  3368. [    1.764091] NET: Registered protocol family 1
  3369. [    1.768531] RPC: Registered named UNIX socket transport module.
  3370. [    1.774259] RPC: Registered udp transport module.
  3371. [    1.778927] RPC: Registered tcp transport module.
  3372. [    1.783597] RPC: Registered tcp NFSv4.1 backchannel transport module.
  3373. [    1.790156] Trying to unpack rootfs image as initramfs...
  3374. [    2.113488] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  3375. [    2.120905] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  3376. [    2.129211] futex hash table entries: 1024 (order: 5, 131072 bytes)
  3377. [    2.135847] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  3378. [    2.142804] NFS: Registering the id_resolver key type
  3379. [    2.147688] Key type id_resolver registered
  3380. [    2.151820] Key type id_legacy registered
  3381. [    2.155805] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  3382. [    2.162475] ntfs: driver 2.1.32 [Flags: R/W].
  3383. [    2.166803] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  3384. [    2.181580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  3385. [    2.188791] io scheduler noop registered
  3386. [    2.192674] io scheduler deadline registered
  3387. [    2.196920] io scheduler cfq registered (default)
  3388. [    2.202177] nwl-pcie fd0e0000.pcie: Link is UP
  3389. [    2.206463] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  3390. [    2.212067] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  3391. [    2.217935] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  3392. [    2.224160] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  3393. [    2.230221] pci_bus 0000:00: root bus resource [bus 00-ff]
  3394. [    2.235666] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  3395. [    2.242498] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  3396. [    2.250424] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  3397. [    2.257018] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  3398. [    2.263765] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  3399. [    2.268956] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  3400. [    2.276424] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  3401. [    2.282806] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  3402. [    2.289862] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  3403. [    2.297015] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  3404. [    2.303872] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  3405. [    2.310794] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  3406. [    2.317715] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  3407. [    2.324635] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  3408. [    2.331552] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  3409. [    2.338474] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  3410. [    2.345394] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  3411. [    2.352353] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  3412. [    2.359241] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  3413. [    2.366153] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  3414. [    2.373075] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  3415. [    2.379995] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  3416. [    2.386915] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  3417. [    2.393835] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  3418. [    2.400755] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  3419. [    2.428788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  3420. [    2.436255] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  3421. [    2.445274] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢000) is a xuartps
  3422.      ºêconsole [ttyPS0] enabled
  3423. [    2.454217] console [ttyPS0] enabled
  3424. [    2.461181] bootconsole [cdns0] disabled
  3425. [    2.461181] bootconsole [cdns0] disabled
  3426. [    2.469203] Unable to detect cache hierarchy from DT for CPU 0
  3427. [    2.479732] brd: module loaded
  3428. [    2.485519] loop: module loaded
  3429. [    2.489496] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  3430. [    2.498372] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  3431. [    2.509075] scsi host0: ahci-ceva
  3432. [    2.512494] scsi host1: ahci-ceva
  3433. [    2.515832] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  3434. [    2.523660] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  3435. [    2.531723] mtdoops: mtd device (mtddev=name/number) must be supplied
  3436. [    2.539071] zynqmp-qspi ff0f0000.spi: rx bus width not found
  3437. [    2.545003] m25p80 spi0.0: found n25q00, expected n25q512a
  3438. [    2.550735] m25p80 spi0.0: n25q00 (131072 Kbytes)
  3439. [    2.555371] 5 ofpart partitions found on MTD device spi0.0
  3440. [    2.560817] Creating 5 MTD partitions on "spi0.0":
  3441. [    2.565594] 0x000000000000-0x000000500000 : "boot"
  3442. [    2.570848] 0x000000500000-0x000000540000 : "bootenv"
  3443. [    2.576227] 0x000000540000-0x000002740000 : "kernel"
  3444. [    2.581503] 0x000002740000-0x000003740000 : "user"
  3445. [    2.586625] 0x000003740000-0x000003750000 : "test"
  3446. [    2.592631] libphy: Fixed MDIO Bus: probed
  3447. [    2.597743] tun: Universal TUN/TAP device driver, 1.6
  3448. [    2.602711] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  3449. [    2.608983] CAN device driver interface
  3450. [    2.613302] macb ff0c0000.ethernet: Not enabling partial store and forward
  3451. [    2.620617] libphy: MACB_mii_bus: probed
  3452. [    2.698977] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  3453. [    2.708722] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  3454. [    2.721315] usbcore: registered new interface driver asix
  3455. [    2.726679] usbcore: registered new interface driver ax88179_178a
  3456. [    2.732724] usbcore: registered new interface driver cdc_ether
  3457. [    2.738538] usbcore: registered new interface driver net1080
  3458. [    2.744185] usbcore: registered new interface driver cdc_subset
  3459. [    2.750083] usbcore: registered new interface driver zaurus
  3460. [    2.755651] usbcore: registered new interface driver cdc_ncm
  3461. [    2.761613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3462. [    2.768054] ehci-pci: EHCI PCI platform driver
  3463. [    2.772712] usbcore: registered new interface driver uas
  3464. [    2.777977] usbcore: registered new interface driver usb-storage
  3465. [    2.784221] mousedev: PS/2 mouse device common for all mice
  3466. [    2.790117] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  3467. [    2.797285] i2c /dev entries driver
  3468. [    2.800912] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  3469. [    2.806962] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  3470. [    2.813732] usbcore: registered new interface driver uvcvideo
  3471. [    2.819397] USB Video Class driver (1.1.1)
  3472. [    2.823836] Bluetooth: HCI UART driver ver 2.3
  3473. [    2.828201] Bluetooth: HCI UART protocol H4 registered
  3474. [    2.833318] Bluetooth: HCI UART protocol BCSP registered
  3475. [    2.838612] Bluetooth: HCI UART protocol LL registered
  3476. [    2.843733] Bluetooth: HCI UART protocol ATH3K registered
  3477. [    2.844889] ata2: SATA link down (SStatus 0 SControl 330)
  3478. [    2.854496] Bluetooth: HCI UART protocol Three-wire (H5) registered
  3479. [    2.860783] Bluetooth: HCI UART protocol Intel registered
  3480. [    2.866163] Bluetooth: HCI UART protocol Broadcom registered
  3481. [    2.871771] Bluetooth: HCI UART protocol QCA registered
  3482. [    2.877011] usbcore: registered new interface driver bcm203x
  3483. [    2.882651] usbcore: registered new interface driver bpa10x
  3484. [    2.888208] usbcore: registered new interface driver bfusb
  3485. [    2.893677] usbcore: registered new interface driver btusb
  3486. [    2.899113] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  3487. [    2.904807] usbcore: registered new interface driver ath3k
  3488. [    2.910343] EDAC MC: ECC not enabled
  3489. [    2.913975] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  3490. [    2.923015] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  3491. [    2.935308] sdhci: Secure Digital Host Controller Interface driver
  3492. [    2.941401] sdhci: Copyright(c) Pierre Ossman
  3493. [    2.945740] sdhci-pltfm: SDHCI platform and OF driver helper
  3494. [    2.998713] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  3495. [    3.002713] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  3496. [    3.002920] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
  3497. [    3.002923] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
  3498. [    3.003144] ata1.00: configured for UDMA/133
  3499. [    3.003454] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk SATA Sl 25   PQ: 0 ANSI: 5
  3500. [    3.038688] ledtrig-cpu: registered to indicate activity on CPUs
  3501. [    3.044754] usbcore: registered new interface driver usbhid
  3502. [    3.050239] usbhid: USB HID core driver
  3503. [    3.055661] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  3504. [    3.062534] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  3505. [    3.069696] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  3506. [    3.071019] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
  3507. [    3.071118] sd 0:0:0:0: [sda] Write Protect is off
  3508. [    3.071165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  3509. [    3.071994]  sda: sda1
  3510. [    3.072533] sd 0:0:0:0: [sda] Attached SCSI disk
  3511. [    3.105377] PLL: shutdown
  3512. [    3.108809] Write failed to divider address:fd1a007c
  3513. [    3.113848] PLL: enable
  3514. [    3.116373] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  3515. [    3.124449] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  3516. [    3.134124] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  3517. [    3.143999] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  3518. [    3.151424] pktgen: Packet Generator for packet performance testing. Version: 2.75
  3519. [    3.159059] Netfilter messages via NETLINK v0.30.
  3520. [    3.163807] ip_tables: (C) 2000-2006 Netfilter Core Team
  3521. [    3.169096] Initializing XFRM netlink socket
  3522. [    3.173361] NET: Registered protocol family 10
  3523. [    3.178188] ip6_tables: (C) 2000-2006 Netfilter Core Team
  3524. [    3.183551] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  3525. [    3.189754] NET: Registered protocol family 17
  3526. [    3.194123] NET: Registered protocol family 15
  3527. [    3.198550] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  3528. [    3.211473] Ebtables v2.0 registered
  3529. [    3.215080] can: controller area network core (rev 20120528 abi 9)
  3530. [    3.221226] NET: Registered protocol family 29
  3531. [    3.225622] can: raw protocol (rev 20120528)
  3532. [    3.229872] can: broadcast manager protocol (rev 20161123 t)
  3533. [    3.235517] can: netlink gateway (rev 20130117) max_hops=1
  3534. [    3.241038] Bluetooth: RFCOMM TTY layer initialized
  3535. [    3.245854] Bluetooth: RFCOMM socket layer initialized
  3536. [    3.250985] Bluetooth: RFCOMM ver 1.11
  3537. [    3.254700] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3538. [    3.259991] Bluetooth: BNEP filters: protocol multicast
  3539. [    3.265204] Bluetooth: BNEP socket layer initialized
  3540. [    3.270148] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  3541. [    3.276052] Bluetooth: HIDP socket layer initialized
  3542. [    3.281178] 9pnet: Installing 9P2000 support
  3543. [    3.285380] Key type dns_resolver registered
  3544. [    3.291019] registered taskstats version 1
  3545. [    3.295417] Btrfs loaded, crc32c=crc32c-generic
  3546. [    3.307051] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  3547. [    3.312470] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  3548. [    3.320917] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  3549. [    3.329566] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  3550. [    3.335641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  3551. [    3.342343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3552. [    3.349545] usb usb1: Product: xHCI Host Controller
  3553. [    3.354404] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  3554. [    3.359698] usb usb1: SerialNumber: xhci-hcd.0.auto
  3555. [    3.364866] hub 1-0:1.0: USB hub found
  3556. [    3.368572] hub 1-0:1.0: 1 port detected
  3557. [    3.372548] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  3558. [    3.377951] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  3559. [    3.385618] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  3560. [    3.393710] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  3561. [    3.400427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3562. [    3.407630] usb usb2: Product: xHCI Host Controller
  3563. [    3.412492] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  3564. [    3.417785] usb usb2: SerialNumber: xhci-hcd.0.auto
  3565. [    3.422858] hub 2-0:1.0: USB hub found
  3566. [    3.426525] hub 2-0:1.0: 1 port detected
  3567. [    3.430820] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  3568. [    3.439024] clk: Not disabling unused clocks
  3569. [    3.443211] ALSA device list:
  3570. [    3.446156]   #0: DisplayPort monitor
  3571. [    3.450962] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  3572. INIT: version 2.88 booting
  3573. Starting udev
  3574. [    3.565152] udevd[1624]: starting version 3.2
  3575. [    3.569788] random: udevd: uninitialized urandom read (16 bytes read)
  3576. [    3.576242] random: udevd: uninitialized urandom read (16 bytes read)
  3577. [    3.582659] random: udevd: uninitialized urandom read (16 bytes read)
  3578. [    3.589052] random: udevd: uninitialized urandom read (16 bytes read)
  3579. [    3.599176] udevd[1625]: starting eudev-3.2
  3580. [    3.642691] random: udevd: uninitialized urandom read (16 bytes read)
  3581. [    3.652515] random: udevd: uninitialized urandom read (16 bytes read)
  3582. [    3.662268] 4fm: loading out-of-tree module taints kernel.
  3583. [    3.669416] pci 0000:00:00.0: enabling device (0000 -> 0002)
  3584. [    3.675073] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  3585. [    3.680690] Accessing 47232 of total 1 entries in dev->bar
  3586. [    3.682524] <dma1> init: registered
  3587. [    3.689667] dev->bar[u].virt_address:cfb607c value:38011121
  3588. [    3.695170] dev->bar[u].virt_address:cfb6080 value:deadbeef
  3589. [    3.700743] dev->bar[u].virt_address:cfb6084 value:baadf00d
  3590. [    3.706282] dev->bar[u].virt_address:cfb6088 value:eba00eba
  3591. [    3.711863] dev->bar[u].virt_address:cfb608c value:beefdeaf
  3592. [    3.724087] <dma2> init: registered
  3593. [    3.727971] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  3594. [    3.986919] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  3595. Populating dev cache
  3596. [    4.245061] random: dd: uninitialized urandom read (512 bytes read)
  3597. Thu Jul 26 08:51:43 UTC 2018
  3598. Starting internet superserver: inetd.
  3599. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  3600. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  3601. INIT: Entering runlevel: 5
  3602. Hello World
  3603. [22]:0x12
  3604. [20]:0x201
  3605. [20]:0x201
  3606. [22]:0x1
  3607. [0]:0x140
  3608. [0]:0x140
  3609. Configuring network interfaces... [    4.544769] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  3610. done.
  3611. Starting Dropbear SSH server: [    4.573967] random: dropbearkey: uninitialized urandom read (32 bytes read)
  3612. [    4.584012] random: dropbearkey: uninitialized urandom read (32 bytes read)
  3613. Generating key, this may take a while...
  3614. [    5.554821] macb ff0c0000.ethernet eth0: link up (1000/Full)
  3615. [    5.560422] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  3616. [    5.741268] random: dropbearkey: uninitialized urandom read (32 bytes read)
  3617. Public key portion is:
  3618. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC9xlsTqalDEA0RUf1E/Y7jnVGREaQP9oKeSvQFVawVgvvkMIvaW1w2mXs7n+hOeOefuPN04fJKdREbaK7pB9ThY0GFPWyg7wo0mjBY7DYI/E7tlIXdTHehwrEhvVRdAIF3hLaagjDLT5S29keqBD5UhpQ40LIJgUCJRVGzo4rTnT3uDugK/0zGZZE8kUWnfbfn7qtAJB5Wb6x/qMQgYpX+BboJLJDQIE5kG5hbsjoe1mAP/259miF2yIiEaLqjukRao1Z7QQ5Ulr0aDpy3L4aXlFshVA2NQCWPRTVUTxtdBY9kaz0EAsHUQ8757k9QSHRlb44qsJcq4G5xQYqSS70l root@VP88x_2017_3_PRJ0191
  3619. Fingerprint: md5 77:8a:d8:04:25:85:cf:1c:75:1a:8c:8f:53:[    5.794184] random: fast init done
  3620. 49:fa:06
  3621. dropbear.
  3622. Starting syslogd/klogd: done
  3623. [    6.249535] random: crng init done
  3624. [    8.055369] jffs2: notice: (2116) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  3625. hello world.....
  3626. Starting tcf-agent: OK
  3627.  
  3628. root@VP88x_2017_3_PRJ0191:~# cd /mnt/
  3629. root@VP88x_2017_3_PRJ0191:/mnt# chmod +x *
  3630. root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
  3631. enter number of cyclic (0 - for infinite)
  3632. 1
  3633. SPI1 result = 0  SUCCESS
  3634. Opened device VP880. PCIe read from CID 0x2000: 2f70013
  3635. PCIe result = 0  SUCCESS
  3636.  
  3637. --- AMS zynq PS System monitor---
  3638. temperature ps 59.10C
  3639. vcc_psintlp    0.87V
  3640. vcc_psintfp    0.87V
  3641. vcc_psaux      1.81V
  3642. vcc_psddr_504  1.21V
  3643. vcc_psio3_503  3.24V
  3644. vcc_psio0_500  3.24V
  3645. vcc_psio1_501  1.80V
  3646. vcc_psio2_502  1.80V
  3647. vcc_psmgtravcc 0.87V
  3648. vcc_psmgtravtt 1.81V
  3649. ---------------------------------
  3650.  
  3651. --- AMS zynq PL System monitor---
  3652. temperature pl 56.73C
  3653. vcc_int        0.87V
  3654. vcc_aux        1.81V
  3655. vcc_bram       0.87V
  3656. vcc_psintlp    0.87V
  3657. vcc_psintfp    0.87V
  3658. vcc_psaux      1.81V
  3659. vcc_vuser1     0.00V
  3660. vcc_vuser2     0.00V
  3661. vcc_vuser3     0.00V
  3662. vcc_vuser4     0.00V
  3663. ---------------------------------
  3664. ranran.............temperature         30 C
  3665. vmon_fmc_vadj       1.79V
  3666. vmon_fmc_viob       1.79V
  3667. vmon_sblast_vcore   1.64V
  3668. vmon_sblast_vio     1.48V
  3669. vmon_2v5_mgt_refclk 2.44V
  3670. vmon_3v3_mgt_refclk 3.22V
  3671. vmon_1v2            1.18V
  3672. vmon_1v4            1.40V
  3673. vmon_vaux           3.32V
  3674. VPX_SYS_RST_N       :1
  3675. PS_ERROR_STATUS     :1
  3676. PS_ERROR_OUT        :1
  3677. PS_INIT_B           :1
  3678. PS_DONE             :1
  3679. INIT_B              :1
  3680. DONE                :1
  3681. FLASH_A26           :1
  3682. HSC_12V_PG          :1
  3683. HSC_5V_PG           :1
  3684. VPX_GAP             :1
  3685. VPX_GA4             :1
  3686. VPX_GA3             :1
  3687. VPX_GA2             :1
  3688. VPX_GA1             :1
  3689. VPX_GA0             :1
  3690. PG_LED_N            :1
  3691. ZYNQ_CONFDONE_LED   :1
  3692. FPGA_CONFDONE_LED   :1
  3693. FMC_VADJ_VS0        :1
  3694. FMC_VADJ_VS1        :1
  3695. FMC_VADJ_VS2        :1
  3696. VADJ_FMC_EN_L       :1
  3697. FMC_BYPASS          :1
  3698. HSC_ON              :1
  3699. HSC_3V3_PG          :1
  3700. PG_C2M_3V3          :1
  3701. MGT_PG              :1
  3702. DDR4_VTT_PG         :1
  3703. DDR4_PG             :1
  3704. PG_FPGA_CORE        :1
  3705. 1V8_LOC_2V5_VPP_PG  :1
  3706. HSC Source channel 1     3.250V
  3707. HSC Source channel 2     5.031V
  3708. HSC ADIN channel 1       0.423V
  3709. HSC ADIN channel 2       0.423V
  3710. HSC Sense channel 1      14.688mV
  3711. HSC Current channel 1    2.938A
  3712. HSC Sense channel 2      2.688mV
  3713. HSC Current channel 2    0.896A
  3714. HSC Power channel 1      9.547W
  3715. HSC Power channel 2      4.507W
  3716. ---------------------------------------------------
  3717. HSC Source channel 1     2.500V
  3718. HSC Source channel 2     11.906V
  3719. HSC ADIN channel 1       0.423V
  3720. HSC ADIN channel 2       0.421V
  3721. HSC Sense channel 1      0.000mV
  3722. HSC Current channel 1    0.000A
  3723. HSC Sense channel 2      4.625mV
  3724. HSC Current channel 2    0.925A
  3725. HSC Power channel 1      0.000W
  3726. HSC Power channel 2      11.013W
  3727. ---------------------------------------------------
  3728. HOSTIF version 1.0.0.5
  3729. read fpga values
  3730. temp_pl         51.303833
  3731. vcc_int         0.955078
  3732. vcc_aux         1.801758
  3733. vcc_bram         0.958008
  3734. vcc_vuser0         1.500000
  3735. vcc_vuser1         1.186523
  3736. vcc_vuser2         0.000000
  3737. vcc_vuser3         0.000000
  3738. MMC result =SUCCESS
  3739. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  3740. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.678 ms
  3741.  
  3742. --- 192.168.1.20 ping statistics ---
  3743. 1 packets transmitted, 1 packets received, 0% packet loss
  3744. round-trip min/avg/max = 0.678/0.678/0.678 ms
  3745. Ethernet result = 0  SUCCESS
  3746. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  3747.  
  3748. Global Units:
  3749. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  3750. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  3751. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  3752. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  3753. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  3754. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  3755.  
  3756.  
  3757. Running 'VP880-FMC134' on PCIe, CID725
  3758.  
  3759. -----------------------------------------------------------
  3760. Device 'VP880' (P0)
  3761. -----------------------------------------------------------
  3762. Constellation ID   : 759
  3763. Number Of Stars    : 19
  3764. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  3765. Firmware Build Code: 0
  3766. Firmware Revision  : 1.2
  3767. -----------------------------------------------------------
  3768.  
  3769. FMC detected
  3770. FMC result = 0  SUCCESS
  3771. memory test: OK
  3772. Memory result = 0  SUCCESS
  3773. DISK: OK
  3774. DISK result = 0 SUCCESS
  3775. FLASH: OK
  3776. FLASH result = 0 SUCCESS
  3777. read returned 9
  3778. RFFE result = 0 SUCCESS
  3779. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/
  3780. devices/            drivers_probe       slots/
  3781. drivers/            rescan              uevent
  3782. drivers_autoprobe   resource_alignment
  3783. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/
  3784. devices/            drivers_probe       slots/
  3785. drivers/            rescan              uevent
  3786. drivers_autoprobe   resource_alignment
  3787. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:0
  3788. 0000:00:00.0/ 0000:01:00.0/
  3789. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/
  3790. 0000:01:00.0/             driver_override           remove
  3791. broken_parity_status      enable                    rescan
  3792. class                     irq                       resource
  3793. config                    local_cpulist             subsystem/
  3794. consistent_dma_mask_bits  local_cpus                subsystem_device
  3795. device                    modalias                  subsystem_vendor
  3796. devspec                   msi_bus                   uevent
  3797. dma_mask_bits             pci_bus/                  vendor
  3798. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/config > /mnt/pciconfig0
  3799. BusyBox v1.24.1 (2018-05-24 10:33:04 MDT) multi-call binary.
  3800.  
  3801. Usage: cp [OPTIONS] SOURCE... DEST
  3802.  
  3803. Copy SOURCE(s) to DEST
  3804.  
  3805.         -a      Same as -dpR
  3806.         -R,-r   Recurse
  3807.         -d,-P   Preserve symlinks (default if -R)
  3808.         -L      Follow all symlinks
  3809.         -H      Follow symlinks on command line
  3810.         -p      Preserve file attributes if possible
  3811.         -f      Overwrite
  3812.         -i      Prompt before overwrite
  3813.         -l,-s   Create (sym)links
  3814. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/config  /
  3815. mnt/pciconfig0
  3816. root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:01\:00.0/config  /
  3817. mnt/pciconfig1
  3818. root@VP88x_2017_3_PRJ0191:/mnt# sync
  3819. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
  3820. rescan    resource
  3821. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
  3822. rescan    resource
  3823. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
  3824. rescan    resource
  3825. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/rescan
  3826. root@VP88x_2017_3_PRJ0191:/mnt#
  3827. root@VP88x_2017_3_PRJ0191:/mnt#
  3828. root@VP88x_2017_3_PRJ0191:/mnt#
  3829. root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
  3830. enter number of cyclic (0 - for infinite)
  3831. 1
  3832. SPI1 result = 0  SUCCESS
  3833. Opened device VP880. PCIe read from CID 0x2000: 2f70013
  3834. PCIe result = 0  SUCCESS
  3835.  
  3836. --- AMS zynq PS System monitor---
  3837. temperature ps 57.91C
  3838. vcc_psintlp    0.87V
  3839. vcc_psintfp    0.87V
  3840. vcc_psaux      1.81V
  3841. vcc_psddr_504  1.21V
  3842. vcc_psio3_503  3.24V
  3843. vcc_psio0_500  3.24V
  3844. vcc_psio1_501  1.80V
  3845. vcc_psio2_502  1.80V
  3846. vcc_psmgtravcc 0.87V
  3847. vcc_psmgtravtt 1.80V
  3848. ---------------------------------
  3849.  
  3850. --- AMS zynq PL System monitor---
  3851. temperature pl 55.69C
  3852. vcc_int        0.87V
  3853. vcc_aux        1.81V
  3854. vcc_bram       0.87V
  3855. vcc_psintlp    0.87V
  3856. vcc_psintfp    0.87V
  3857. vcc_psaux      1.81V
  3858. vcc_vuser1     0.00V
  3859. vcc_vuser2     0.00V
  3860. vcc_vuser3     0.00V
  3861. vcc_vuser4     0.00V
  3862. ---------------------------------
  3863. ranran.............temperature         29 C
  3864. vmon_fmc_vadj       1.79V
  3865. vmon_fmc_viob       1.79V
  3866. vmon_sblast_vcore   1.64V
  3867. vmon_sblast_vio     1.48V
  3868. vmon_2v5_mgt_refclk 2.44V
  3869. vmon_3v3_mgt_refclk 3.22V
  3870. vmon_1v2            1.18V
  3871. vmon_1v4            1.40V
  3872. vmon_vaux           3.31V
  3873. VPX_SYS_RST_N       :1
  3874. PS_ERROR_STATUS     :1
  3875. PS_ERROR_OUT        :1
  3876. PS_INIT_B           :1
  3877. PS_DONE             :1
  3878. INIT_B              :1
  3879. DONE                :1
  3880. FLASH_A26           :1
  3881. HSC_12V_PG          :1
  3882. HSC_5V_PG           :1
  3883. VPX_GAP             :1
  3884. VPX_GA4             :1
  3885. VPX_GA3             :1
  3886. VPX_GA2             :1
  3887. VPX_GA1             :1
  3888. VPX_GA0             :1
  3889. PG_LED_N            :1
  3890. ZYNQ_CONFDONE_LED   :1
  3891. FPGA_CONFDONE_LED   :1
  3892. FMC_VADJ_VS0        :1
  3893. FMC_VADJ_VS1        :1
  3894. FMC_VADJ_VS2        :1
  3895. VADJ_FMC_EN_L       :1
  3896. FMC_BYPASS          :1
  3897. HSC_ON              :1
  3898. HSC_3V3_PG          :1
  3899. PG_C2M_3V3          :1
  3900. MGT_PG              :1
  3901. DDR4_VTT_PG         :1
  3902. DDR4_PG             :1
  3903. PG_FPGA_CORE        :1
  3904. 1V8_LOC_2V5_VPP_PG  :1
  3905. HSC Source channel 1     3.250V
  3906. HSC Source channel 2     5.031V
  3907. HSC ADIN channel 1       0.423V
  3908. HSC ADIN channel 2       0.423V
  3909. HSC Sense channel 1      14.625mV
  3910. HSC Current channel 1    2.925A
  3911. HSC Sense channel 2      2.625mV
  3912. HSC Current channel 2    0.875A
  3913. HSC Power channel 1      9.506W
  3914. HSC Power channel 2      4.402W
  3915. ---------------------------------------------------
  3916. HSC Source channel 1     2.500V
  3917. HSC Source channel 2     11.906V
  3918. HSC ADIN channel 1       0.423V
  3919. HSC ADIN channel 2       0.423V
  3920. HSC Sense channel 1      0.000mV
  3921. HSC Current channel 1    0.000A
  3922. HSC Sense channel 2      4.562mV
  3923. HSC Current channel 2    0.913A
  3924. HSC Power channel 1      0.000W
  3925. HSC Power channel 2      10.864W
  3926. ---------------------------------------------------
  3927. HOSTIF version 1.0.0.5
  3928. read fpga values
  3929. temp_pl         51.303833
  3930. vcc_int         0.958008
  3931. vcc_aux         1.801758
  3932. vcc_bram         0.958008
  3933. vcc_vuser0         1.500000
  3934. vcc_vuser1         1.186523
  3935. vcc_vuser2         0.000000
  3936. vcc_vuser3         0.000000
  3937. MMC result =SUCCESS
  3938. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  3939. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.590 ms
  3940.  
  3941. --- 192.168.1.20 ping statistics ---
  3942. 1 packets transmitted, 1 packets received, 0% packet loss
  3943. round-trip min/avg/max = 0.590/0.590/0.590 ms
  3944. Ethernet result = 0  SUCCESS
  3945. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  3946.  
  3947. Global Units:
  3948. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index [  146.284374] Trying to free nonexistent resource <0000000400000000-000000040000ffff>
  3949. 1 of star type 0x000D (Host Interface)
  3950. Global Unit 1 is on Devi[  146.296529] Trying to free nonexistent resource <0000000400010000-000000040001ffff>
  3951. ce 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  3952. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  3953. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  3954. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  3955. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  3956.  
  3957.  
  3958. Running 'VP880-FMC134' on PCIe, CID725
  3959.  
  3960. -----------------------------------------------------------
  3961. Device 'VP880' (P0)
  3962. -----------------------------------------------------------
  3963. Constellation ID   : 759
  3964. Number Of Stars    : 19
  3965. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  3966. Firmware Build Code: 0
  3967. Firmware Revision  : 1.2
  3968. -----------------------------------------------------------
  3969.  
  3970. FMC detected
  3971. FMC result = 0  SUCCESS
  3972. memory test: OK
  3973. Memory result = 0  SUCCESS
  3974. DISK: OK
  3975. DISK result = 0 SUCCESS
  3976. FLASH: OK
  3977. FLASH result = 0 SUCCESS
  3978. read returned 9
  3979. RFFE result = 0 SUCCESS
  3980. root@VP88x_2017_3_PRJ0191:/mnt#
  3981. root@VP88x_2017_3_PRJ0191:/mnt#
  3982. root@VP88x_2017_3_PRJ0191:/mnt#
  3983. root@VP88x_2017_3_PRJ0191:/mnt#
  3984. root@VP88x_2017_3_PRJ0191:/mnt#
  3985. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:0
  3986. 0000:00:00.0/ 0000:01:00.0/
  3987. root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:0^C
  3988. root@VP88x_2017_3_PRJ0191:/mnt# reXilinx Zynq MP First Stage Boot Loader
  3989. Release 2017.3   May 24 2018  -  10:35:53
  3990. Marvell PHY reset
  3991. SI5338 0x70 not configured
  3992. SI5338 0x70 configuration finished
  3993. SI5338 0x71 not configured
  3994. SI5338 0x71 configuration finished
  3995.  
  3996.  
  3997. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  3998.  
  3999. I2C:   ready
  4000. DRAM:  2 GiB
  4001. EL Level:       EL2
  4002. Chip ID:        xczu3eg
  4003. MMC:   Card did not respond to voltage select!
  4004. sdhci@ff160000 - probe failed: -95
  4005. Card did not respond to voltage select!
  4006.  
  4007. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  4008. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  4009. *** Warning - bad CRC, using default environment
  4010.  
  4011. In:    serial
  4012. Out:   serial
  4013. Err:   serial
  4014. Bootmode: QSPI_MODE
  4015. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  4016. eth0: ethernet@ff0c0000
  4017. U-BOOT for VP88x_2017_3_PRJ0191
  4018.  
  4019. Hit any key to stop autoboot:  0
  4020. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  4021. device 0 offset 0x540000, size 0x2200000
  4022. SF: 35651584 bytes @ 0x540000 Read: OK
  4023. ## Loading kernel from FIT Image at 10000000 ...
  4024.    Using 'conf@1' configuration
  4025.    Trying 'kernel@0' kernel subimage
  4026.      Description:  Linux Kernel
  4027.      Type:         Kernel Image
  4028.      Compression:  uncompressed
  4029.      Data Start:   0x100000d8
  4030.      Data Size:    12503552 Bytes = 11.9 MiB
  4031.      Architecture: AArch64
  4032.      OS:           Linux
  4033.      Load Address: 0x00080000
  4034.      Entry Point:  0x00080000
  4035.      Hash algo:    sha1
  4036.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  4037.    Verifying Hash Integrity ... sha1+ OK
  4038. ## Loading ramdisk from FIT Image at 10000000 ...
  4039.    Using 'conf@1' configuration
  4040.    Trying 'ramdisk@0' ramdisk subimage
  4041.      Description:  ramdisk
  4042.      Type:         RAMDisk Image
  4043.      Compression:  uncompressed
  4044.      Data Start:   0x10bf54e4
  4045.      Data Size:    8973721 Bytes = 8.6 MiB
  4046.      Architecture: AArch64
  4047.      OS:           Linux
  4048.      Load Address: unavailable
  4049.      Entry Point:  unavailable
  4050.      Hash algo:    sha1
  4051.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  4052.    Verifying Hash Integrity ... sha1+ OK
  4053. ## Loading fdt from FIT Image at 10000000 ...
  4054.    Using 'conf@1' configuration
  4055.    Trying 'fdt@0' fdt subimage
  4056.      Description:  Flattened Device Tree blob
  4057.      Type:         Flat Device Tree
  4058.      Compression:  uncompressed
  4059.      Data Start:   0x10becbd0
  4060.      Data Size:    34910 Bytes = 34.1 KiB
  4061.      Architecture: AArch64
  4062.      Hash algo:    sha1
  4063.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  4064.    Verifying Hash Integrity ... sha1+ OK
  4065.    Booting using the fdt blob at 0x10becbd0
  4066.    Loading Kernel Image ... OK
  4067.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  4068.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  4069.  
  4070. Starting kernel ...
  4071.  
  4072. [    0.000000] Booting Linux on physical CPU 0x0
  4073. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  4074. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  4075. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  4076. [    0.000000] bootconsole [cdns0] enabled
  4077. [    0.000000] efi: Getting EFI parameters from FDT:
  4078. [    0.000000] efi: UEFI not found.
  4079. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  4080. [    0.000000] psci: probing for conduit method from DT.
  4081. [    0.000000] psci: PSCIv1.0 detected in firmware.
  4082. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  4083. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  4084. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  4085. [    0.000000] Detected VIPT I-cache on CPU0
  4086. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  4087. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  4088. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  4089. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  4090. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  4091. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  4092. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  4093. [    0.000000] Virtual kernel memory layout:
  4094. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  4095. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  4096. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  4097. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  4098. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  4099. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  4100. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  4101. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  4102. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  4103. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  4104. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  4105. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  4106. [    0.000000] Hierarchical RCU implementation.
  4107. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  4108. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  4109. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  4110. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  4111. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  4112. [    0.000000] GIC: Using split EOI/Deactivate mode
  4113. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  4114. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  4115. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  4116. [    0.008255] Console: colour dummy device 80x25
  4117. [    0.012528] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  4118. [    0.022886] pid_max: default: 32768 minimum: 301
  4119. [    0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  4120. [    0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  4121. [    0.041865] ASID allocator initialised with 65536 entries
  4122. [    0.047562] zynqmp_plat_init Power management API v0.3
  4123. [    0.052577] EFI services will not be available.
  4124. [    0.057339] Detected VIPT I-cache on CPU1
  4125. [    0.057374] CPU1: Booted secondary processor [410fd034]
  4126. [    0.057633] Detected VIPT I-cache on CPU2
  4127. [    0.057650] CPU2: Booted secondary processor [410fd034]
  4128. [    0.057900] Detected VIPT I-cache on CPU3
  4129. [    0.057916] CPU3: Booted secondary processor [410fd034]
  4130. [    0.057949] Brought up 4 CPUs
  4131. [    0.088237] SMP: Total of 4 processors activated.
  4132. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  4133. [    0.098710] CPU: All CPU(s) started at EL2
  4134. [    0.102782] alternatives: patching kernel code
  4135. [    0.108040] devtmpfs: initialized
  4136. [    0.115567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  4137. [    0.136591] xor: measuring software checksum speed
  4138. [    0.181263]    8regs     :  2543.000 MB/sec
  4139. [    0.221287]    8regs_prefetch:  2266.000 MB/sec
  4140. [    0.265656]    32regs    :  3125.000 MB/sec
  4141. [    0.305683]    32regs_prefetch:  2627.000 MB/sec
  4142. [    0.310104] xor: using function: 32regs (3125.000 MB/sec)
  4143. [    0.315560] pinctrl core: initialized pinctrl subsystem
  4144. [    0.321244] NET: Registered protocol family 16
  4145. [    0.326405] Failed to initialise IOMMU /amba/smmu@fd800000
  4146. [    0.331903] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  4147. [    0.339109] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  4148. [    0.374452] DMA: preallocated 65536 KiB pool for atomic allocations
  4149. [    0.390825] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  4150. [    0.398306] ARM CCI_400_r1 PMU driver probed[    0.405081] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  4151. [    0.431785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  4152. [    0.504963] raid6: int64x1  gen()   447 MB/s
  4153. [    0.576913] raid6: int64x1  xor()   485 MB/s
  4154. [    0.648983] raid6: int64x2  gen()   741 MB/s
  4155. [    0.721016] raid6: int64x2  xor()   661 MB/s
  4156. [    0.793056] raid6: int64x4  gen()  1086 MB/s
  4157. [    0.865074] raid6: int64x4  xor()   813 MB/s
  4158. [    0.937147] raid6: int64x8  gen()  1266 MB/s
  4159. [    1.009158] raid6: int64x8  xor()   824 MB/s
  4160. [    1.081202] raid6: neonx1   gen()   796 MB/s
  4161. [    1.153268] raid6: neonx1   xor()   837 MB/s
  4162. [    1.225328] raid6: neonx2   gen()  1286 MB/s
  4163. [    1.297331] raid6: neonx2   xor()  1143 MB/s
  4164. [    1.369405] raid6: neonx4   gen()  1664 MB/s
  4165. [    1.441419] raid6: neonx4   xor()  1306 MB/s
  4166. [    1.513481] raid6: neonx8   gen()  1752 MB/s
  4167. [    1.585510] raid6: neonx8   xor()  1348 MB/s
  4168. [    1.589586] raid6: using algorithm neonx8 gen() 1752 MB/s
  4169. [    1.594948] raid6: .... xor() 1348 MB/s, rmw enabled
  4170. [    1.599879] raid6: using intx1 recovery algorithm
  4171. [    1.605039] Write failed gate address:1000f02
  4172. [    1.613003] SCSI subsystem initialized
  4173. [    1.616784] usbcore: registered new interface driver usbfs
  4174. [    1.622119] usbcore: registered new interface driver hub
  4175. [    1.627395] usbcore: registered new device driver usb
  4176. [    1.632438] media: Linux media interface: v0.10
  4177. [    1.636891] Linux video capture interface: v2.00
  4178. [    1.641478] pps_core: LinuxPPS API ver. 1 registered
  4179. [    1.646382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  4180. [    1.655475] PTP clock support registered
  4181. [    1.659375] EDAC MC: Ver: 3.0.0
  4182. [    1.662740] FPGA manager framework
  4183. [    1.666090] fpga-region fpga-full: FPGA Region probed
  4184. [    1.671091] Advanced Linux Sound Architecture Driver Initialized.
  4185. [    1.677347] Bluetooth: Core ver 2.22
  4186. [    1.680753] NET: Registered protocol family 31
  4187. [    1.685144] Bluetooth: HCI device and connection manager initialized
  4188. [    1.691463] Bluetooth: HCI socket layer initialized
  4189. [    1.696304] Bluetooth: L2CAP socket layer initialized
  4190. [    1.701330] Bluetooth: SCO socket layer initialized
  4191. [    1.706742] clocksource: Switched to clocksource arch_sys_counter
  4192. [    1.712736] VFS: Disk quotas dquot_6.6.0
  4193. [    1.716580] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  4194. [    1.726831] NET: Registered protocol family 2
  4195. [    1.731373] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  4196. [    1.738489] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  4197. [    1.745277] TCP: Hash tables configured (established 16384 bind 16384)
  4198. [    1.751673] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  4199. [    1.757603] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  4200. [    1.764110] NET: Registered protocol family 1
  4201. [    1.768552] RPC: Registered named UNIX socket transport module.
  4202. [    1.774277] RPC: Registered udp transport module.
  4203. [    1.778944] RPC: Registered tcp transport module.
  4204. [    1.783615] RPC: Registered tcp NFSv4.1 backchannel transport module.
  4205. [    1.790171] Trying to unpack rootfs image as initramfs...
  4206. [    2.113325] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  4207. [    2.120762] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  4208. [    2.128988] futex hash table entries: 1024 (order: 5, 131072 bytes)
  4209. [    2.135630] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  4210. [    2.142548] NFS: Registering the id_resolver key type
  4211. [    2.147431] Key type id_resolver registered
  4212. [    2.151575] Key type id_legacy registered
  4213. [    2.155546] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  4214. [    2.162216] ntfs: driver 2.1.32 [Flags: R/W].
  4215. [    2.166545] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  4216. [    2.181286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  4217. [    2.188497] io scheduler noop registered
  4218. [    2.192381] io scheduler deadline registered
  4219. [    2.196625] io scheduler cfq registered (default)
  4220. [    2.201878] nwl-pcie fd0e0000.pcie: Link is UP
  4221. [    2.206170] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  4222. [    2.211774] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  4223. [    2.217641] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  4224. [    2.223866] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  4225. [    2.229927] pci_bus 0000:00: root bus resource [bus 00-ff]
  4226. [    2.235372] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  4227. [    2.242209] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  4228. [    2.250134] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  4229. [    2.256725] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  4230. [    2.263472] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  4231. [    2.268659] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  4232. [    2.276123] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  4233. [    2.282495] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  4234. [    2.289546] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  4235. [    2.296704] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  4236. [    2.303562] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  4237. [    2.310480] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  4238. [    2.317400] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  4239. [    2.324323] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  4240. [    2.331244] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  4241. [    2.338158] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  4242. [    2.345084] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  4243. [    2.352042] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  4244. [    2.358920] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  4245. [    2.365843] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  4246. [    2.372761] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  4247. [    2.379684] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  4248. [    2.386610] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  4249. [    2.393524] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  4250. [    2.400441] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  4251. [    2.428643] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  4252. [    2.436122] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  4253. [    2.445136] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢?êconsole [ttyPS0] enabled
  4254. [    2.454080] console [ttyPS0] enabled
  4255. [    2.461044] bootconsole [cdns0] disabled
  4256. [    2.461044] bootconsole [cdns0] disabled
  4257. [    2.469098] Unable to detect cache hierarchy from DT for CPU 0
  4258. [    2.479611] brd: module loaded
  4259. [    2.485386] loop: module loaded
  4260. [    2.489363] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  4261. [    2.498244] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  4262. [    2.508978] scsi host0: ahci-ceva
  4263. [    2.512392] scsi host1: ahci-ceva
  4264. [    2.515733] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  4265. [    2.523565] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  4266. [    2.531608] mtdoops: mtd device (mtddev=name/number) must be supplied
  4267. [    2.538969] zynqmp-qspi ff0f0000.spi: rx bus width not found
  4268. [    2.544898] m25p80 spi0.0: found n25q00, expected n25q512a
  4269. [    2.550608] m25p80 spi0.0: n25q00 (131072 Kbytes)
  4270. [    2.555251] 5 ofpart partitions found on MTD device spi0.0
  4271. [    2.560696] Creating 5 MTD partitions on "spi0.0":
  4272. [    2.565472] 0x000000000000-0x000000500000 : "boot"
  4273. [    2.570731] 0x000000500000-0x000000540000 : "bootenv"
  4274. [    2.576097] 0x000000540000-0x000002740000 : "kernel"
  4275. [    2.581391] 0x000002740000-0x000003740000 : "user"
  4276. [    2.586498] 0x000003740000-0x000003750000 : "test"
  4277. [    2.592482] libphy: Fixed MDIO Bus: probed
  4278. [    2.597593] tun: Universal TUN/TAP device driver, 1.6
  4279. [    2.602563] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  4280. [    2.608835] CAN device driver interface
  4281. [    2.613150] macb ff0c0000.ethernet: Not enabling partial store and forward
  4282. [    2.620456] libphy: MACB_mii_bus: probed
  4283. [    2.699017] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  4284. [    2.708767] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  4285. [    2.721357] usbcore: registered new interface driver asix
  4286. [    2.726721] usbcore: registered new interface driver ax88179_178a
  4287. [    2.732768] usbcore: registered new interface driver cdc_ether
  4288. [    2.738585] usbcore: registered new interface driver net1080
  4289. [    2.744224] usbcore: registered new interface driver cdc_subset
  4290. [    2.750127] usbcore: registered new interface driver zaurus
  4291. [    2.755693] usbcore: registered new interface driver cdc_ncm
  4292. [    2.761652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  4293. [    2.768098] ehci-pci: EHCI PCI platform driver
  4294. [    2.772750] usbcore: registered new interface driver uas
  4295. [    2.778011] usbcore: registered new interface driver usb-storage
  4296. [    2.784264] mousedev: PS/2 mouse device common for all mice
  4297. [    2.790165] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  4298. [    2.797327] i2c /dev entries driver
  4299. [    2.800957] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  4300. [    2.807007] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  4301. [    2.813770] usbcore: registered new interface driver uvcvideo
  4302. [    2.819433] USB Video Class driver (1.1.1)
  4303. [    2.823872] Bluetooth: HCI UART driver ver 2.3
  4304. [    2.828237] Bluetooth: HCI UART protocol H4 registered
  4305. [    2.833353] Bluetooth: HCI UART protocol BCSP registered
  4306. [    2.838648] Bluetooth: HCI UART protocol LL registered
  4307. [    2.843768] Bluetooth: HCI UART protocol ATH3K registered
  4308. [    2.844935] ata2: SATA link down (SStatus 0 SControl 330)
  4309. [    2.854531] Bluetooth: HCI UART protocol Three-wire (H5) registered
  4310. [    2.860819] Bluetooth: HCI UART protocol Intel registered
  4311. [    2.866197] Bluetooth: HCI UART protocol Broadcom registered
  4312. [    2.871805] Bluetooth: HCI UART protocol QCA registered
  4313. [    2.877045] usbcore: registered new interface driver bcm203x
  4314. [    2.882685] usbcore: registered new interface driver bpa10x
  4315. [    2.888245] usbcore: registered new interface driver bfusb
  4316. [    2.893710] usbcore: registered new interface driver btusb
  4317. [    2.899148] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  4318. [    2.904839] usbcore: registered new interface driver ath3k
  4319. [    2.910380] EDAC MC: ECC not enabled
  4320. [    2.914003] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  4321. [    2.923033] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  4322. [    2.935324] sdhci: Secure Digital Host Controller Interface driver
  4323. [    2.941419] sdhci: Copyright(c) Pierre Ossman
  4324. [    2.945758] sdhci-pltfm: SDHCI platform and OF driver helper
  4325. [    2.998755] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  4326. [    3.002753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  4327. [    3.002951] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
  4328. [    3.002954] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
  4329. [    3.003174] ata1.00: configured for UDMA/133
  4330. [    3.003479] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk SATA Sl 25   PQ: 0 ANSI: 5
  4331. [    3.038728] ledtrig-cpu: registered to indicate activity on CPUs
  4332. [    3.044803] usbcore: registered new interface driver usbhid
  4333. [    3.050292] usbhid: USB HID core driver
  4334. [    3.055739] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  4335. [    3.062609] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  4336. [    3.069774] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  4337. [    3.077127] PLL: shutdown
  4338. [    3.080565] Write failed to divider address:fd1a007c
  4339. [    3.085604] PLL: enable
  4340. [    3.088128] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  4341. [    3.096211] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  4342. [    3.107923] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  4343. [    3.117768] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  4344. [    3.119091] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
  4345. [    3.119198] sd 0:0:0:0: [sda] Write Protect is off
  4346. [    3.119245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  4347. [    3.120077]  sda: sda1
  4348. [    3.120591] sd 0:0:0:0: [sda] Attached SCSI disk
  4349. [    3.153519] pktgen: Packet Generator for packet performance testing. Version: 2.75
  4350. [    3.162194] Netfilter messages via NETLINK v0.30.
  4351. [    3.166941] ip_tables: (C) 2000-2006 Netfilter Core Team
  4352. [    3.172221] Initializing XFRM netlink socket
  4353. [    3.176491] NET: Registered protocol family 10
  4354. [    3.182943] ip6_tables: (C) 2000-2006 Netfilter Core Team
  4355. [    3.188296] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  4356. [    3.194500] NET: Registered protocol family 17
  4357. [    3.198874] NET: Registered protocol family 15
  4358. [    3.203297] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  4359. [    3.216220] Ebtables v2.0 registered
  4360. [    3.219815] can: controller area network core (rev 20120528 abi 9)
  4361. [    3.225975] NET: Registered protocol family 29
  4362. [    3.230369] can: raw protocol (rev 20120528)
  4363. [    3.234628] can: broadcast manager protocol (rev 20161123 t)
  4364. [    3.240266] can: netlink gateway (rev 20130117) max_hops=1
  4365. [    3.245789] Bluetooth: RFCOMM TTY layer initialized
  4366. [    3.250599] Bluetooth: RFCOMM socket layer initialized
  4367. [    3.255725] Bluetooth: RFCOMM ver 1.11
  4368. [    3.259461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  4369. [    3.264741] Bluetooth: BNEP filters: protocol multicast
  4370. [    3.269952] Bluetooth: BNEP socket layer initialized
  4371. [    3.274897] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  4372. [    3.280801] Bluetooth: HIDP socket layer initialized
  4373. [    3.285946] 9pnet: Installing 9P2000 support
  4374. [    3.290147] Key type dns_resolver registered
  4375. [    3.294792] registered taskstats version 1
  4376. [    3.299176] Btrfs loaded, crc32c=crc32c-generic
  4377. [    3.310882] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  4378. [    3.316310] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  4379. [    3.324192] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  4380. [    3.332841] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  4381. [    3.338914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  4382. [    3.345617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  4383. [    3.352819] usb usb1: Product: xHCI Host Controller
  4384. [    3.357678] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  4385. [    3.362972] usb usb1: SerialNumber: xhci-hcd.0.auto
  4386. [    3.368966] hub 1-0:1.0: USB hub found
  4387. [    3.372653] hub 1-0:1.0: 1 port detected
  4388. [    3.376652] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  4389. [    3.382056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  4390. [    3.389722] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  4391. [    3.397824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  4392. [    3.404533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  4393. [    3.411736] usb usb2: Product: xHCI Host Controller
  4394. [    3.416596] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  4395. [    3.421891] usb usb2: SerialNumber: xhci-hcd.0.auto
  4396. [    3.426959] hub 2-0:1.0: USB hub found
  4397. [    3.430633] hub 2-0:1.0: 1 port detected
  4398. [    3.434915] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  4399. [    3.443112] clk: Not disabling unused clocks
  4400. [    3.447301] ALSA device list:
  4401. [    3.450244]   #0: DisplayPort monitor
  4402. [    3.454517] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  4403. INIT: version 2.88 booting
  4404. Starting udev
  4405. [    3.570034] udevd[1623]: starting version 3.2
  4406. [    3.574719] random: udevd: uninitialized urandom read (16 bytes read)
  4407. [    3.581163] random: udevd: uninitialized urandom read (16 bytes read)
  4408. [    3.587581] random: udevd: uninitialized urandom read (16 bytes read)
  4409. [    3.593971] random: udevd: uninitialized urandom read (16 bytes read)
  4410. [    3.604024] udevd[1624]: starting eudev-3.2
  4411. [    3.647007] random: udevd: uninitialized urandom read (16 bytes read)
  4412. [    3.656446] random: udevd: uninitialized urandom read (16 bytes read)
  4413. [    3.665512] 4fm: loading out-of-tree module taints kernel.
  4414. [    3.672391] pci 0000:00:00.0: enabling device (0000 -> 0002)
  4415. [    3.678069] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  4416. [    3.683677] Accessing 47232 of total 1 entries in dev->bar
  4417. [    3.689174] dev->bar[u].virt_address:cfae07c value:38011121
  4418. [    3.694722] dev->bar[u].virt_address:cfae080 value:deadbeef
  4419. [    3.700240] dev->bar[u].virt_address:cfae084 value:baadf00d
  4420. [    3.705834] dev->bar[u].virt_address:cfae088 value:eba00eba
  4421. [    3.711339] dev->bar[u].virt_address:cfae08c value:beefdeaf
  4422. [    3.720486] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  4423. [    3.733882] <dma1> init: registered
  4424. [    3.743460] <dma2> init: registered
  4425. [    4.001067] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  4426. Populating dev cache
  4427. [    4.259164] random: dd: uninitialized urandom read (512 bytes read)
  4428. Thu Jul 26 08:51:43 UTC 2018
  4429. Starting internet superserver: inetd.
  4430. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  4431. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  4432. INIT: Entering runlevel: 5
  4433. Hello World
  4434. [22]:0x12
  4435. [20]:0x201
  4436. [20]:0x201
  4437. [22]:0x1
  4438. [0]:0x140
  4439. [0]:0x140
  4440. Configuring network interfaces... [    4.557995] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  4441. done.
  4442. Starting Dropbear SSH server: [    4.586649] random: dropbearkey: uninitialized urandom read (32 bytes read)
  4443. [    4.597252] random: dropbearkey: uninitialized urandom read (32 bytes read)
  4444.  
  4445. [    5.586858] macb ff0c0000.ethernet eth0: link up (1000/Full)
  4446. [    5.592459] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  4447. [    6.442661] random: dropbearkey: uninitialized urandom read (32 bytes read)
  4448. Public key portion is:
  4449. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCEiVe9ICxky0cFOqZZxLxMs7k5Hclka9GAmCcXyBQPifKoKpA1rb9ZCSwatHm+pWPA3OqU13hsSWXZ41I/zfPPantNHyNSqpIFfd3KRy952JMx9+D24a2C72hsdgmDiBb4eomIrKCxQUefLrLVyCvWB7kmTuWQP41luHOnOmsk1ssvDIikW+6Ux0WOIRg1gXLEWj1YyENQEJUaQAW13wbgtzIbHF6bjHSZX/wKPdKV2eL1I3hfZFZa91M9jYno1Y4dvWVEU3KDr3ALx3unmQmvV80R4KP/b0v8uMIJcxjIcl/X8JZzgOVLfECOJYFIg+vLMGPFbSsWjQDruIxExP9j root@VP88x_2017_3_PRJ0191
  4450. Fingerprint: md5 4c:a2:df:83:6c:59:c2:de:ad:88:25:b9:35:0b[    6.495512] random: fast init done
  4451. :c5:95
  4452. dropbear.
  4453. Starting syslogd/klogd: done
  4454. [    6.945424] random: crng init done
  4455. [    8.733735] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  4456. hello world.....
  4457. Starting tcf-agent: OK
  4458.  
  4459. root@VP88x_2017_3_PRJ0191:~# cd /mnt/
  4460. root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
  4461. enter number of cyclic (0 - for infinite)
  4462. 1
  4463. SPI1 result = 0  SUCCESS
  4464. Opened device VP880. PCIe read from CID 0x2000: 2f70013
  4465. PCIe result = 0  SUCCESS
  4466.  
  4467. --- AMS zynq PS System monitor---
  4468. temperature ps 57.61C
  4469. vcc_psintlp    0.87V
  4470. vcc_psintfp    0.87V
  4471. vcc_psaux      1.81V
  4472. vcc_psddr_504  1.21V
  4473. vcc_psio3_503  3.24V
  4474. vcc_psio0_500  3.24V
  4475. vcc_psio1_501  1.80V
  4476. vcc_psio2_502  1.80V
  4477. vcc_psmgtravcc 0.87V
  4478. vcc_psmgtravtt 1.80V
  4479. ---------------------------------
  4480.  
  4481. --- AMS zynq PL System monitor---
  4482. temperature pl 53.73C
  4483. vcc_int        0.87V
  4484. vcc_aux        1.81V
  4485. vcc_bram       0.87V
  4486. vcc_psintlp    0.87V
  4487. vcc_psintfp    0.87V
  4488. vcc_psaux      1.81V
  4489. vcc_vuser1     0.00V
  4490. vcc_vuser2     0.00V
  4491. vcc_vuser3     0.00V
  4492. vcc_vuser4     0.00V
  4493. ---------------------------------
  4494. ranran.............temperature         29 C
  4495. vmon_fmc_vadj       1.79V
  4496. vmon_fmc_viob       1.79V
  4497. vmon_sblast_vcore   1.64V
  4498. vmon_sblast_vio     1.48V
  4499. vmon_2v5_mgt_refclk 2.44V
  4500. vmon_3v3_mgt_refclk 3.22V
  4501. vmon_1v2            1.18V
  4502. vmon_1v4            1.40V
  4503. vmon_vaux           3.31V
  4504. VPX_SYS_RST_N       :1
  4505. PS_ERROR_STATUS     :1
  4506. PS_ERROR_OUT        :1
  4507. PS_INIT_B           :1
  4508. PS_DONE             :1
  4509. INIT_B              :1
  4510. DONE                :1
  4511. FLASH_A26           :1
  4512. HSC_12V_PG          :1
  4513. HSC_5V_PG           :1
  4514. VPX_GAP             :1
  4515. VPX_GA4             :1
  4516. VPX_GA3             :1
  4517. VPX_GA2             :1
  4518. VPX_GA1             :1
  4519. VPX_GA0             :1
  4520. PG_LED_N            :1
  4521. ZYNQ_CONFDONE_LED   :1
  4522. FPGA_CONFDONE_LED   :1
  4523. FMC_VADJ_VS0        :1
  4524. FMC_VADJ_VS1        :1
  4525. FMC_VADJ_VS2        :1
  4526. VADJ_FMC_EN_L       :1
  4527. FMC_BYPASS          :1
  4528. HSC_ON              :1
  4529. HSC_3V3_PG          :1
  4530. PG_C2M_3V3          :1
  4531. MGT_PG              :1
  4532. DDR4_VTT_PG         :1
  4533. DDR4_PG             :1
  4534. PG_FPGA_CORE        :1
  4535. 1V8_LOC_2V5_VPP_PG  :1
  4536. HSC Source channel 1     3.250V
  4537. HSC Source channel 2     5.031V
  4538. HSC ADIN channel 1       0.423V
  4539. HSC ADIN channel 2       0.423V
  4540. HSC Sense channel 1      14.625mV
  4541. HSC Current channel 1    2.925A
  4542. HSC Sense channel 2      2.625mV
  4543. HSC Current channel 2    0.875A
  4544. HSC Power channel 1      9.506W
  4545. HSC Power channel 2      4.402W
  4546. ---------------------------------------------------
  4547. HSC Source channel 1     2.500V
  4548. HSC Source channel 2     11.906V
  4549. HSC ADIN channel 1       0.423V
  4550. HSC ADIN channel 2       0.424V
  4551. HSC Sense channel 1      0.000mV
  4552. HSC Current channel 1    0.000A
  4553. HSC Sense channel 2      4.562mV
  4554. HSC Current channel 2    0.913A
  4555. HSC Power channel 1      0.000W
  4556. HSC Power channel 2      10.864W
  4557. ---------------------------------------------------
  4558. HOSTIF version 1.0.0.5
  4559. read fpga values
  4560. temp_pl         50.812714
  4561. vcc_int         0.958008
  4562. vcc_aux         1.801758
  4563. vcc_bram         0.958008
  4564. vcc_vuser0         1.502930
  4565. vcc_vuser1         1.186523
  4566. vcc_vuser2         0.000000
  4567. vcc_vuser3         0.000000
  4568. MMC result =SUCCESS
  4569. PING 192.168.1.20 (192.168.1.20): 56 data bytes
  4570. 64 bytes from 192.168.1.20: seq=0 ttl=128 time=0.618 ms
  4571.  
  4572. --- 192.168.1.20 ping statistics ---
  4573. 1 packets transmitted, 1 packets received, 0% packet loss
  4574. round-trip min/avg/max = 0.618/0.618/0.618 ms
  4575. Ethernet result = 0  SUCCESS
  4576. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  4577.  
  4578. Global Units:
  4579. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  4580. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  4581. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  4582. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  4583. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  4584. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  4585.  
  4586.  
  4587. Running 'VP880-FMC134' on PCIe, CID725
  4588.  
  4589. -----------------------------------------------------------
  4590. Device 'VP880' (P0)
  4591. -----------------------------------------------------------
  4592. Constellation ID   : 759
  4593. Number Of Stars    : 19
  4594. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  4595. Firmware Build Code: 0
  4596. Firmware Revision  : 1.2
  4597. -----------------------------------------------------------
  4598.  
  4599. FMC detected
  4600. FMC result = 0  SUCCESS
  4601. memory test: OK
  4602. Memory result = 0  SUCCESS
  4603. DISK: OK
  4604. DISK result = 0 SUCCESS
  4605. FLASH: OK
  4606. FLASH result = 0 SUCCESS
  4607. read returned 9
  4608. RFFE result = 0 SUCCESS
  4609. root@VP88x_2017_3_PRJ0191:/mnt# Xilinx Zynq MP First Stage Boot Loader
  4610. Release 2017.3   May 24 2018  -  10:35:53
  4611. Marvell PHY reset
  4612. SI5338 0x70 not configured
  4613. SI5338 0x70 configuration finished
  4614. SI5338 0x71 not configured
  4615. SI5338 0x71 configuration finished
  4616.  
  4617.  
  4618. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  4619.  
  4620. I2C:   ready
  4621. DRAM:  2 GiB
  4622. EL Level:       EL2
  4623. Chip ID:        xczu3eg
  4624. MMC:   Card did not respond to voltage select!
  4625. sdhci@ff160000 - probe failed: -95
  4626. Card did not respond to voltage select!
  4627.  
  4628. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  4629. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  4630. *** Warning - bad CRC, using default environment
  4631.  
  4632. In:    serial
  4633. Out:   serial
  4634. Err:   serial
  4635. Bootmode: QSPI_MODE
  4636. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  4637. eth0: ethernet@ff0c0000
  4638. U-BOOT for VP88x_2017_3_PRJ0191
  4639.  
  4640. Hit any key to stop autoboot:  0
  4641. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  4642. device 0 offset 0x540000, size 0x2200000
  4643. SF: 35651584 bytes @ 0x540000 Read: OK
  4644. ## Loading kernel from FIT Image at 10000000 ...
  4645.    Using 'conf@1' configuration
  4646.    Trying 'kernel@0' kernel subimage
  4647.      Description:  Linux Kernel
  4648.      Type:         Kernel Image
  4649.      Compression:  uncompressed
  4650.      Data Start:   0x100000d8
  4651.      Data Size:    12503552 Bytes = 11.9 MiB
  4652.      Architecture: AArch64
  4653.      OS:           Linux
  4654.      Load Address: 0x00080000
  4655.      Entry Point:  0x00080000
  4656.      Hash algo:    sha1
  4657.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  4658.    Verifying Hash Integrity ... sha1+ OK
  4659. ## Loading ramdisk from FIT Image at 10000000 ...
  4660.    Using 'conf@1' configuration
  4661.    Trying 'ramdisk@0' ramdisk subimage
  4662.      Description:  ramdisk
  4663.      Type:         RAMDisk Image
  4664.      Compression:  uncompressed
  4665.      Data Start:   0x10bf54e4
  4666.      Data Size:    8973721 Bytes = 8.6 MiB
  4667.      Architecture: AArch64
  4668.      OS:           Linux
  4669.      Load Address: unavailable
  4670.      Entry Point:  unavailable
  4671.      Hash algo:    sha1
  4672.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  4673.    Verifying Hash Integrity ... sha1+ OK
  4674. ## Loading fdt from FIT Image at 10000000 ...
  4675.    Using 'conf@1' configuration
  4676.    Trying 'fdt@0' fdt subimage
  4677.      Description:  Flattened Device Tree blob
  4678.      Type:         Flat Device Tree
  4679.      Compression:  uncompressed
  4680.      Data Start:   0x10becbd0
  4681.      Data Size:    34910 Bytes = 34.1 KiB
  4682.      Architecture: AArch64
  4683.      Hash algo:    sha1
  4684.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  4685.    Verifying Hash Integrity ... sha1+ OK
  4686.    Booting using the fdt blob at 0x10becbd0
  4687.    Loading Kernel Image ... OK
  4688.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  4689.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  4690.  
  4691. Starting kernel ...
  4692.  
  4693. [    0.000000] Booting Linux on physical CPU 0x0
  4694. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  4695. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  4696. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  4697. [    0.000000] bootconsole [cdns0] enabled
  4698. [    0.000000] efi: Getting EFI parameters from FDT:
  4699. [    0.000000] efi: UEFI not found.
  4700. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  4701. [    0.000000] psci: probing for conduit method from DT.
  4702. [    0.000000] psci: PSCIv1.0 detected in firmware.
  4703. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  4704. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  4705. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  4706. [    0.000000] Detected VIPT I-cache on CPU0
  4707. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  4708. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  4709. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  4710. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  4711. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  4712. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  4713. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  4714. [    0.000000] Virtual kernel memory layout:
  4715. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  4716. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  4717. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  4718. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  4719. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  4720. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  4721. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  4722. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  4723. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  4724. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  4725. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  4726. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  4727. [    0.000000] Hierarchical RCU implementation.
  4728. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  4729. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  4730. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  4731. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  4732. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  4733. [    0.000000] GIC: Using split EOI/Deactivate mode
  4734. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  4735. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  4736. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  4737. [    0.008254] Console: colour dummy device 80x25
  4738. [    0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  4739. [    0.022886] pid_max: default: 32768 minimum: 301
  4740. [    0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  4741. [    0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  4742. [    0.041866] ASID allocator initialised with 65536 entries
  4743. [    0.047561] zynqmp_plat_init Power management API v0.3
  4744. [    0.052578] EFI services will not be available.
  4745. [    0.057341] Detected VIPT I-cache on CPU1
  4746. [    0.057375] CPU1: Booted secondary processor [410fd034]
  4747. [    0.057636] Detected VIPT I-cache on CPU2
  4748. [    0.057653] CPU2: Booted secondary processor [410fd034]
  4749. [    0.057902] Detected VIPT I-cache on CPU3
  4750. [    0.057918] CPU3: Booted secondary processor [410fd034]
  4751. [    0.057950] Brought up 4 CPUs
  4752. [    0.088237] SMP: Total of 4 processors activated.
  4753. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  4754. [    0.098709] CPU: All CPU(s) started at EL2
  4755. [    0.102782] alternatives: patching kernel code
  4756. [    0.108038] devtmpfs: initialized
  4757. [    0.115570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  4758. [    0.136572] xor: measuring software checksum speed
  4759. [    0.181245]    8regs     :  2542.000 MB/sec
  4760. [    0.221270]    8regs_prefetch:  2266.000 MB/sec
  4761. [    0.265638]    32regs    :  3125.000 MB/sec
  4762. [    0.305666]    32regs_prefetch:  2627.000 MB/sec
  4763. [    0.310087] xor: using function: 32regs (3125.000 MB/sec)
  4764. [    0.315541] pinctrl core: initialized pinctrl subsystem
  4765. [    0.321222] NET: Registered protocol family 16
  4766. [    0.326302] Failed to initialise IOMMU /amba/smmu@fd800000
  4767. [    0.331809] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  4768. [    0.339015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  4769. [    0.374251] DMA: preallocated 65536 KiB pool for atomic allocations
  4770. [    0.390649] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  4771. [    0.398133] ARM CCI_400_r1 PMU driver probed[    0.404898] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  4772. [    0.431602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  4773. [    0.504911] raid6: int64x1  gen()   447 MB/s
  4774. [    0.576907] raid6: int64x1  xor()   486 MB/s
  4775. [    0.648955] raid6: int64x2  gen()   741 MB/s
  4776. [    0.720995] raid6: int64x2  xor()   661 MB/s
  4777. [    0.793033] raid6: int64x4  gen()  1086 MB/s
  4778. [    0.865087] raid6: int64x4  xor()   816 MB/s
  4779. [    0.937141] raid6: int64x8  gen()  1266 MB/s
  4780. [    1.009165] raid6: int64x8  xor()   824 MB/s
  4781. [    1.081195] raid6: neonx1   gen()   796 MB/s
  4782. [    1.153227] raid6: neonx1   xor()   837 MB/s
  4783. [    1.225309] raid6: neonx2   gen()  1286 MB/s
  4784. [    1.297327] raid6: neonx2   xor()  1143 MB/s
  4785. [    1.369357] raid6: neonx4   gen()  1664 MB/s
  4786. [    1.441396] raid6: neonx4   xor()  1306 MB/s
  4787. [    1.513456] raid6: neonx8   gen()  1752 MB/s
  4788. [    1.585490] raid6: neonx8   xor()  1348 MB/s
  4789. [    1.589569] raid6: using algorithm neonx8 gen() 1752 MB/s
  4790. [    1.594931] raid6: .... xor() 1348 MB/s, rmw enabled
  4791. [    1.599861] raid6: using intx1 recovery algorithm
  4792. [    1.605023] Write failed gate address:1000f02
  4793. [    1.612843] SCSI subsystem initialized
  4794. [    1.616630] usbcore: registered new interface driver usbfs
  4795. [    1.621952] usbcore: registered new interface driver hub
  4796. [    1.627239] usbcore: registered new device driver usb
  4797. [    1.632289] media: Linux media interface: v0.10
  4798. [    1.636734] Linux video capture interface: v2.00
  4799. [    1.641320] pps_core: LinuxPPS API ver. 1 registered
  4800. [    1.646226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  4801. [    1.655320] PTP clock support registered
  4802. [    1.659221] EDAC MC: Ver: 3.0.0
  4803. [    1.662567] FPGA manager framework
  4804. [    1.665913] fpga-region fpga-full: FPGA Region probed
  4805. [    1.670915] Advanced Linux Sound Architecture Driver Initialized.
  4806. [    1.677170] Bluetooth: Core ver 2.22
  4807. [    1.680575] NET: Registered protocol family 31
  4808. [    1.684971] Bluetooth: HCI device and connection manager initialized
  4809. [    1.691289] Bluetooth: HCI socket layer initialized
  4810. [    1.696131] Bluetooth: L2CAP socket layer initialized
  4811. [    1.701165] Bluetooth: SCO socket layer initialized
  4812. [    1.706553] clocksource: Switched to clocksource arch_sys_counter
  4813. [    1.712548] VFS: Disk quotas dquot_6.6.0
  4814. [    1.716386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  4815. [    1.726629] NET: Registered protocol family 2
  4816. [    1.731173] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  4817. [    1.738289] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  4818. [    1.745074] TCP: Hash tables configured (established 16384 bind 16384)
  4819. [    1.751467] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  4820. [    1.757404] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  4821. [    1.763919] NET: Registered protocol family 1
  4822. [    1.768354] RPC: Registered named UNIX socket transport module.
  4823. [    1.774077] RPC: Registered udp transport module.
  4824. [    1.778745] RPC: Registered tcp transport module.
  4825. [    1.783416] RPC: Registered tcp NFSv4.1 backchannel transport module.
  4826. [    1.789966] Trying to unpack rootfs image as initramfs...
  4827. [    2.113067] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  4828. [    2.120497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  4829. [    2.128813] futex hash table entries: 1024 (order: 5, 131072 bytes)
  4830. [    2.135455] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  4831. [    2.142401] NFS: Registering the id_resolver key type
  4832. [    2.147282] Key type id_resolver registered
  4833. [    2.151413] Key type id_legacy registered
  4834. [    2.155398] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  4835. [    2.162068] ntfs: driver 2.1.32 [Flags: R/W].
  4836. [    2.166396] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  4837. [    2.181215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  4838. [    2.188427] io scheduler noop registered
  4839. [    2.192319] io scheduler deadline registered
  4840. [    2.196556] io scheduler cfq registered (default)
  4841. [    2.201813] nwl-pcie fd0e0000.pcie: Link is UP
  4842. [    2.206102] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  4843. [    2.211704] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  4844. [    2.217572] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  4845. [    2.223796] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  4846. [    2.229857] pci_bus 0000:00: root bus resource [bus 00-ff]
  4847. [    2.235304] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  4848. [    2.242135] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  4849. [    2.250066] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  4850. [    2.256664] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  4851. [    2.263411] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  4852. [    2.268598] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  4853. [    2.276065] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  4854. [    2.282440] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  4855. [    2.289488] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  4856. [    2.296646] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  4857. [    2.303509] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  4858. [    2.310428] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  4859. [    2.317358] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  4860. [    2.324270] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  4861. [    2.331192] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  4862. [    2.338108] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  4863. [    2.345031] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  4864. [    2.351989] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  4865. [    2.358872] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  4866. [    2.365794] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  4867. [    2.372708] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  4868. [    2.379635] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  4869. [    2.386557] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  4870. [    2.393472] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  4871. [    2.400394] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  4872. [    2.428475] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  4873. [    2.435948] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  4874. [    2.444971] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª?²êconsole [ttyPS0] enabled
  4875. [    2.453916] console [ttyPS0] enabled
  4876. [    2.460878] bootconsole [cdns0] disabled
  4877. [    2.460878] bootconsole [cdns0] disabled
  4878. [    2.468967] Unable to detect cache hierarchy from DT for CPU 0
  4879. [    2.479463] brd: module loaded
  4880. [    2.485243] loop: module loaded
  4881. [    2.489216] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  4882. [    2.498097] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  4883. [    2.508825] scsi host0: ahci-ceva
  4884. [    2.512247] scsi host1: ahci-ceva
  4885. [    2.515582] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  4886. [    2.523411] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  4887. [    2.531482] mtdoops: mtd device (mtddev=name/number) must be supplied
  4888. [    2.538854] zynqmp-qspi ff0f0000.spi: rx bus width not found
  4889. [    2.544800] m25p80 spi0.0: found n25q00, expected n25q512a
  4890. [    2.550505] m25p80 spi0.0: n25q00 (131072 Kbytes)
  4891. [    2.555147] 5 ofpart partitions found on MTD device spi0.0
  4892. [    2.560593] Creating 5 MTD partitions on "spi0.0":
  4893. [    2.565368] 0x000000000000-0x000000500000 : "boot"
  4894. [    2.570627] 0x000000500000-0x000000540000 : "bootenv"
  4895. [    2.576011] 0x000000540000-0x000002740000 : "kernel"
  4896. [    2.581295] 0x000002740000-0x000003740000 : "user"
  4897. [    2.586412] 0x000003740000-0x000003750000 : "test"
  4898. [    2.592413] libphy: Fixed MDIO Bus: probed
  4899. [    2.597550] tun: Universal TUN/TAP device driver, 1.6
  4900. [    2.602520] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  4901. [    2.608801] CAN device driver interface
  4902. [    2.613120] macb ff0c0000.ethernet: Not enabling partial store and forward
  4903. [    2.620433] libphy: MACB_mii_bus: probed
  4904. [    2.698829] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  4905. [    2.708576] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  4906. [    2.721180] usbcore: registered new interface driver asix
  4907. [    2.726552] usbcore: registered new interface driver ax88179_178a
  4908. [    2.732594] usbcore: registered new interface driver cdc_ether
  4909. [    2.738411] usbcore: registered new interface driver net1080
  4910. [    2.744050] usbcore: registered new interface driver cdc_subset
  4911. [    2.749953] usbcore: registered new interface driver zaurus
  4912. [    2.755522] usbcore: registered new interface driver cdc_ncm
  4913. [    2.761481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  4914. [    2.767926] ehci-pci: EHCI PCI platform driver
  4915. [    2.772581] usbcore: registered new interface driver uas
  4916. [    2.777848] usbcore: registered new interface driver usb-storage
  4917. [    2.784119] mousedev: PS/2 mouse device common for all mice
  4918. [    2.790026] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  4919. [    2.797189] i2c /dev entries driver
  4920. [    2.800819] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  4921. [    2.806877] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  4922. [    2.813647] usbcore: registered new interface driver uvcvideo
  4923. [    2.819312] USB Video Class driver (1.1.1)
  4924. [    2.823745] Bluetooth: HCI UART driver ver 2.3
  4925. [    2.828107] Bluetooth: HCI UART protocol H4 registered
  4926. [    2.833223] Bluetooth: HCI UART protocol BCSP registered
  4927. [    2.838519] Bluetooth: HCI UART protocol LL registered
  4928. [    2.843639] Bluetooth: HCI UART protocol ATH3K registered
  4929. [    2.844748] ata2: SATA link down (SStatus 0 SControl 330)
  4930. [    2.854401] Bluetooth: HCI UART protocol Three-wire (H5) registered
  4931. [    2.860686] Bluetooth: HCI UART protocol Intel registered
  4932. [    2.866068] Bluetooth: HCI UART protocol Broadcom registered
  4933. [    2.871679] Bluetooth: HCI UART protocol QCA registered
  4934. [    2.876921] usbcore: registered new interface driver bcm203x
  4935. [    2.882562] usbcore: registered new interface driver bpa10x
  4936. [    2.888112] usbcore: registered new interface driver bfusb
  4937. [    2.893580] usbcore: registered new interface driver btusb
  4938. [    2.899018] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  4939. [    2.904713] usbcore: registered new interface driver ath3k
  4940. [    2.910250] EDAC MC: ECC not enabled
  4941. [    2.913877] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  4942. [    2.922912] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  4943. [    2.935212] sdhci: Secure Digital Host Controller Interface driver
  4944. [    2.941307] sdhci: Copyright(c) Pierre Ossman
  4945. [    2.945646] sdhci-pltfm: SDHCI platform and OF driver helper
  4946. [    2.998565] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  4947. [    3.002566] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  4948. [    3.002771] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
  4949. [    3.002774] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
  4950. [    3.002999] ata1.00: configured for UDMA/133
  4951. [    3.010845] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk SATA Sl 25   PQ: 0 ANSI: 5
  4952. [    3.038553] ledtrig-cpu: registered to indicate activity on CPUs
  4953. [    3.044603] usbcore: registered new interface driver usbhid
  4954. [    3.050085] usbhid: USB HID core driver
  4955. [    3.055514] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  4956. [    3.062410] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  4957. [    3.069586] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  4958. [    3.076927] PLL: shutdown
  4959. [    3.080350] Write failed to divider address:fd1a007c
  4960. [    3.085388] PLL: enable
  4961. [    3.087912] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  4962. [    3.096010] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  4963. [    3.096416] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
  4964. [    3.096512] sd 0:0:0:0: [sda] Write Protect is off
  4965. [    3.096558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  4966. [    3.097396]  sda: sda1
  4967. [    3.097968] sd 0:0:0:0: [sda] Attached SCSI disk
  4968. [    3.134031] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  4969. [    3.144662] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  4970. [    3.152115] pktgen: Packet Generator for packet performance testing. Version: 2.75
  4971. [    3.160769] Netfilter messages via NETLINK v0.30.
  4972. [    3.165518] ip_tables: (C) 2000-2006 Netfilter Core Team
  4973. [    3.170797] Initializing XFRM netlink socket
  4974. [    3.175068] NET: Registered protocol family 10
  4975. [    3.179899] ip6_tables: (C) 2000-2006 Netfilter Core Team
  4976. [    3.185259] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  4977. [    3.191472] NET: Registered protocol family 17
  4978. [    3.195844] NET: Registered protocol family 15
  4979. [    3.200268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  4980. [    3.213192] Ebtables v2.0 registered
  4981. [    3.216800] can: controller area network core (rev 20120528 abi 9)
  4982. [    3.222944] NET: Registered protocol family 29
  4983. [    3.227340] can: raw protocol (rev 20120528)
  4984. [    3.231591] can: broadcast manager protocol (rev 20161123 t)
  4985. [    3.237235] can: netlink gateway (rev 20130117) max_hops=1
  4986. [    3.244742] Bluetooth: RFCOMM TTY layer initialized
  4987. [    3.249540] Bluetooth: RFCOMM socket layer initialized
  4988. [    3.254666] Bluetooth: RFCOMM ver 1.11
  4989. [    3.258385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  4990. [    3.263683] Bluetooth: BNEP filters: protocol multicast
  4991. [    3.268893] Bluetooth: BNEP socket layer initialized
  4992. [    3.273837] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  4993. [    3.279743] Bluetooth: HIDP socket layer initialized
  4994. [    3.284890] 9pnet: Installing 9P2000 support
  4995. [    3.289087] Key type dns_resolver registered
  4996. [    3.293748] registered taskstats version 1
  4997. [    3.298131] Btrfs loaded, crc32c=crc32c-generic
  4998. [    3.310311] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  4999. [    3.315743] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  5000. [    3.323617] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  5001. [    3.332270] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  5002. [    3.338336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  5003. [    3.345043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  5004. [    3.352246] usb usb1: Product: xHCI Host Controller
  5005. [    3.357104] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  5006. [    3.362399] usb usb1: SerialNumber: xhci-hcd.0.auto
  5007. [    3.367562] hub 1-0:1.0: USB hub found
  5008. [    3.371248] hub 1-0:1.0: 1 port detected
  5009. [    3.375244] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  5010. [    3.380651] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  5011. [    3.388317] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  5012. [    3.396419] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  5013. [    3.403128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  5014. [    3.410330] usb usb2: Product: xHCI Host Controller
  5015. [    3.415191] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  5016. [    3.420485] usb usb2: SerialNumber: xhci-hcd.0.auto
  5017. [    3.425556] hub 2-0:1.0: USB hub found
  5018. [    3.429233] hub 2-0:1.0: 1 port detected
  5019. [    3.433515] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  5020. [    3.441716] clk: Not disabling unused clocks
  5021. [    3.445904] ALSA device list:
  5022. [    3.448852]   #0: DisplayPort monitor
  5023. [    3.453120] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  5024. INIT: version 2.88 booting
  5025. Starting udev
  5026. [    3.569116] udevd[1623]: starting version 3.2
  5027. [    3.573793] random: udevd: uninitialized urandom read (16 bytes read)
  5028. [    3.580246] random: udevd: uninitialized urandom read (16 bytes read)
  5029. [    3.586665] random: udevd: uninitialized urandom read (16 bytes read)
  5030. [    3.593083] random: udevd: uninitialized urandom read (16 bytes read)
  5031. [    3.603103] udevd[1624]: starting eudev-3.2
  5032. [    3.646883] random: udevd: uninitialized urandom read (16 bytes read)
  5033. [    3.656963] random: udevd: uninitialized urandom read (16 bytes read)
  5034. [    3.666821] 4fm: loading out-of-tree module taints kernel.
  5035. [    3.674913] pci 0000:00:00.0: enabling device (0000 -> 0002)
  5036. [    3.680599] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  5037. [    3.686218] Accessing 47232 of total 1 entries in dev->bar
  5038. [    3.686249] <dma1> init: registered
  5039. [    3.695176] dev->bar[u].virt_address:cfb607c value:38011121
  5040. [    3.700685] dev->bar[u].virt_address:cfb6080 value:deadbeef
  5041. [    3.706285] dev->bar[u].virt_address:cfb6084 value:baadf00d
  5042. [    3.711800] dev->bar[u].virt_address:cfb6088 value:eba00eba
  5043. [    3.717381] dev->bar[u].virt_address:cfb608c value:beefdeaf
  5044. [    3.729346] <dma2> init: registered
  5045. [    3.766232] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  5046. [    3.979774] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  5047. Populating dev cache
  5048. [    4.241229] random: dd: uninitialized urandom read (512 bytes read)
  5049. Thu Jul 26 08:51:43 UTC 2018
  5050. Starting internet superserver: inetd.
  5051. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  5052. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  5053. INIT: Entering runlevel: 5
  5054. Hello World
  5055. [22]:0x12
  5056. [20]:0x201
  5057. [20]:0x201
  5058. [22]:0x1
  5059. [0]:0x140
  5060. [0]:0x140
  5061. Configuring network interfaces... [    4.540685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  5062. done.
  5063. Starting Dropbear SSH server: [    4.569390] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5064. [    4.579437] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5065. Generating key, this may take a while...
  5066. [    5.554674] macb ff0c0000.ethernet eth0: link up (1000/Full)
  5067. [    5.560278] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  5068.  
  5069.  
  5070.  
  5071.  
  5072.  
  5073.  
  5074.  
  5075.  
  5076. [   16.356606] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5077. Public key portion is:
  5078. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCWzjlgP6W3MXaOBUc0iijIgkOqgk3gaY9156/YqrWIfz+WOtVc4DbL+V8Tr2PCEwdUDhiuExjJNnA5KxbkITl5RQzToZMJAilKisPGi4utvj+kYntp49tdNuOTJzHtTk2JERp+CNZNOZJJtI5uk6m9jzAbQ72a7I+y7MTQNcIc96SU5mcQWAgq//KtHkbP+ERrmg56tHZtWS+c0N097QX8W6GKi4eXDGX57Snde4qged8ZKi4XhZYcG0JCw03pTIjodMY/ck5dUC04lBwW1Nuo8bUSIEuD/w0b7Nz4ueDlOXD/fee0v4WuVkUoj+2UA13IwzirnYbCiU5brDWZ8+RH root@VP88x_2017_3_PRJ0191
  5079. Fingerprint: md5 b9:d1:79:21:26:f8:83:fe:16:64:dd:7b:00:28:a6:b9
  5080. dropbear.
  5081. Starting syslogd/klogd: done
  5082. [   16.410261] random: fast init done
  5083. [   16.865974] random: crng init done
  5084.  
  5085.  
  5086.  
  5087.  
  5088. [   18.662091] jffs2: notice: (2119) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  5089. hello world.....
  5090. Starting tcf-agent: OK
  5091.  
  5092. root@VP88x_2017_3_PRJ0191:~#
  5093. root@VP88x_2017_3_PRJ0191:~#
  5094. root@VP88x_2017_3_PRJ0191:~#
  5095. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  5096. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  5097.  
  5098. Global Units:
  5099. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  5100. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  5101. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  5102. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  5103. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  5104. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  5105.  
  5106.  
  5107. Running 'VP880-FMC134' on PCIe, CID725
  5108.  
  5109. -----------------------------------------------------------
  5110. Device 'VP880' (P0)
  5111. -----------------------------------------------------------
  5112. Constellation ID   : 759
  5113. Number Of Stars    : 19
  5114. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  5115. Firmware Build Code: 0
  5116. Firmware Revision  : 1.2
  5117. -----------------------------------------------------------
  5118.  
  5119.     - Unit 0 is VP88x host interface star
  5120.  
  5121. -------- Onboard Monitoring (ADC Monitor) ---------
  5122. Temp (       AD7291  ) : OK    (54.75C)
  5123. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  5124. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  5125. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  5126. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  5127. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  5128. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  5129.  
  5130. Vin6 ( ADC0     raw  ) : OK    (0.682V)
  5131. Vin6 ( ADC0    Temp  ) : OK    (67.65C)
  5132.  
  5133. Vin7 ( ADC1     raw  ) : OK    (0.683V)
  5134. Vin7 ( ADC1    Temp  ) : OK    (66.89C)
  5135. ---------------------------------------------------
  5136.  
  5137.  
  5138. -------- Onboard Monitoring (Voltage Monitor) ---------
  5139. Temp (   AD7291  ) : OK    (53.00C)
  5140. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  5141. Vin1 (  3.3Vclk  ) : OK    ( 3.24V)
  5142. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  5143. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  5144. Vin4 (     Vadj  ) : OK    ( 1.81V)
  5145. Vin5 (  3.3Vfmc  ) : OK    ( 3.24V)
  5146. Vin6 ( 12.0Vfmc  ) : OK    (11.95V)
  5147. Vin7 (     Viob  ) : OK    ( 1.81V)
  5148. -------------------------------------------------------
  5149.  
  5150. Configuring clock tree ...
  5151.  
  5152.  
  5153.  Setting Clock_Mode
  5154. Internal Reference Mode
  5155. Using LMX2581 PLL as Clock Source
  5156. Xilinx Zynq MP First Stage Boot Loader
  5157. Release 2017.3   May 24 2018  -  10:35:53
  5158. Marvell PHY reset
  5159. SI5338 0x70 not configured
  5160. SI5338 0x70 configuration finished
  5161. SI5338 0x71 not configured
  5162. SI5338 0x71 configuration finished
  5163.  
  5164.  
  5165. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  5166.  
  5167. I2C:   ready
  5168. DRAM:  2 GiB
  5169. EL Level:       EL2
  5170. Chip ID:        xczu3eg
  5171. MMC:   Card did not respond to voltage select!
  5172. sdhci@ff160000 - probe failed: -95
  5173. Card did not respond to voltage select!
  5174.  
  5175. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  5176. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  5177. *** Warning - bad CRC, using default environment
  5178.  
  5179. In:    serial
  5180. Out:   serial
  5181. Err:   serial
  5182. Bootmode: QSPI_MODE
  5183. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  5184. eth0: ethernet@ff0c0000
  5185. U-BOOT for VP88x_2017_3_PRJ0191
  5186.  
  5187. Hit any key to stop autoboot:  0
  5188. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  5189. device 0 offset 0x540000, size 0x2200000
  5190. SF: 35651584 bytes @ 0x540000 Read: OK
  5191. ## Loading kernel from FIT Image at 10000000 ...
  5192.    Using 'conf@1' configuration
  5193.    Trying 'kernel@0' kernel subimage
  5194.      Description:  Linux Kernel
  5195.      Type:         Kernel Image
  5196.      Compression:  uncompressed
  5197.      Data Start:   0x100000d8
  5198.      Data Size:    12503552 Bytes = 11.9 MiB
  5199.      Architecture: AArch64
  5200.      OS:           Linux
  5201.      Load Address: 0x00080000
  5202.      Entry Point:  0x00080000
  5203.      Hash algo:    sha1
  5204.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  5205.    Verifying Hash Integrity ... sha1+ OK
  5206. ## Loading ramdisk from FIT Image at 10000000 ...
  5207.    Using 'conf@1' configuration
  5208.    Trying 'ramdisk@0' ramdisk subimage
  5209.      Description:  ramdisk
  5210.      Type:         RAMDisk Image
  5211.      Compression:  uncompressed
  5212.      Data Start:   0x10bf54e4
  5213.      Data Size:    8973721 Bytes = 8.6 MiB
  5214.      Architecture: AArch64
  5215.      OS:           Linux
  5216.      Load Address: unavailable
  5217.      Entry Point:  unavailable
  5218.      Hash algo:    sha1
  5219.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  5220.    Verifying Hash Integrity ... sha1+ OK
  5221. ## Loading fdt from FIT Image at 10000000 ...
  5222.    Using 'conf@1' configuration
  5223.    Trying 'fdt@0' fdt subimage
  5224.      Description:  Flattened Device Tree blob
  5225.      Type:         Flat Device Tree
  5226.      Compression:  uncompressed
  5227.      Data Start:   0x10becbd0
  5228.      Data Size:    34910 Bytes = 34.1 KiB
  5229.      Architecture: AArch64
  5230.      Hash algo:    sha1
  5231.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  5232.    Verifying Hash Integrity ... sha1+ OK
  5233.    Booting using the fdt blob at 0x10becbd0
  5234.    Loading Kernel Image ... OK
  5235.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  5236.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  5237.  
  5238. Starting kernel ...
  5239.  
  5240. [    0.000000] Booting Linux on physical CPU 0x0
  5241. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  5242. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  5243. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  5244. [    0.000000] bootconsole [cdns0] enabled
  5245. [    0.000000] efi: Getting EFI parameters from FDT:
  5246. [    0.000000] efi: UEFI not found.
  5247. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  5248. [    0.000000] psci: probing for conduit method from DT.
  5249. [    0.000000] psci: PSCIv1.0 detected in firmware.
  5250. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  5251. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  5252. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  5253. [    0.000000] Detected VIPT I-cache on CPU0
  5254. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  5255. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  5256. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  5257. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  5258. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  5259. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  5260. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  5261. [    0.000000] Virtual kernel memory layout:
  5262. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  5263. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  5264. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  5265. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  5266. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  5267. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  5268. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  5269. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  5270. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  5271. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  5272. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  5273. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  5274. [    0.000000] Hierarchical RCU implementation.
  5275. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  5276. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  5277. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  5278. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  5279. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  5280. [    0.000000] GIC: Using split EOI/Deactivate mode
  5281. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  5282. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  5283. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  5284. [    0.008253] Console: colour dummy device 80x25
  5285. [    0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  5286. [    0.022886] pid_max: default: 32768 minimum: 301
  5287. [    0.027579] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  5288. [    0.034138] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  5289. [    0.041867] ASID allocator initialised with 65536 entries
  5290. [    0.047561] zynqmp_plat_init Power management API v0.3
  5291. [    0.052578] EFI services will not be available.
  5292. [    0.057340] Detected VIPT I-cache on CPU1
  5293. [    0.057375] CPU1: Booted secondary processor [410fd034]
  5294. [    0.057637] Detected VIPT I-cache on CPU2
  5295. [    0.057653] CPU2: Booted secondary processor [410fd034]
  5296. [    0.057905] Detected VIPT I-cache on CPU3
  5297. [    0.057922] CPU3: Booted secondary processor [410fd034]
  5298. [    0.057955] Brought up 4 CPUs
  5299. [    0.088237] SMP: Total of 4 processors activated.
  5300. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  5301. [    0.098710] CPU: All CPU(s) started at EL2
  5302. [    0.102782] alternatives: patching kernel code
  5303. [    0.108042] devtmpfs: initialized
  5304. [    0.115575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  5305. [    0.136603] xor: measuring software checksum speed
  5306. [    0.181272]    8regs     :  2543.000 MB/sec
  5307. [    0.221296]    8regs_prefetch:  2266.000 MB/sec
  5308. [    0.265664]    32regs    :  3125.000 MB/sec
  5309. [    0.305692]    32regs_prefetch:  2627.000 MB/sec
  5310. [    0.310113] xor: using function: 32regs (3125.000 MB/sec)
  5311. [    0.315571] pinctrl core: initialized pinctrl subsystem
  5312. [    0.321248] NET: Registered protocol family 16
  5313. [    0.326391] Failed to initialise IOMMU /amba/smmu@fd800000
  5314. [    0.331887] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  5315. [    0.339092] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  5316. [    0.374376] DMA: preallocated 65536 KiB pool for atomic allocations
  5317. [    0.390743] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  5318. [    0.398224] ARM CCI_400_r1 PMU driver probed[    0.405004] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  5319. [    0.439768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  5320. [    0.512952] raid6: int64x1  gen()   448 MB/s
  5321. [    0.584983] raid6: int64x1  xor()   486 MB/s
  5322. [    0.657011] raid6: int64x2  gen()   741 MB/s
  5323. [    0.729046] raid6: int64x2  xor()   661 MB/s
  5324. [    0.801074] raid6: int64x4  gen()  1086 MB/s
  5325. [    0.873104] raid6: int64x4  xor()   816 MB/s
  5326. [    0.945167] raid6: int64x8  gen()  1266 MB/s
  5327. [    1.017205] raid6: int64x8  xor()   824 MB/s
  5328. [    1.089294] raid6: neonx1   gen()   797 MB/s
  5329. [    1.161291] raid6: neonx1   xor()   837 MB/s
  5330. [    1.233336] raid6: neonx2   gen()  1286 MB/s
  5331. [    1.305370] raid6: neonx2   xor()  1143 MB/s
  5332. [    1.377420] raid6: neonx4   gen()  1664 MB/s
  5333. [    1.449436] raid6: neonx4   xor()  1306 MB/s
  5334. [    1.521488] raid6: neonx8   gen()  1752 MB/s
  5335. [    1.593532] raid6: neonx8   xor()  1349 MB/s
  5336. [    1.597613] raid6: using algorithm neonx8 gen() 1752 MB/s
  5337. [    1.602975] raid6: .... xor() 1349 MB/s, rmw enabled
  5338. [    1.607906] raid6: using intx1 recovery algorithm
  5339. [    1.613057] Write failed gate address:1000f02
  5340. [    1.620958] SCSI subsystem initialized
  5341. [    1.624743] usbcore: registered new interface driver usbfs
  5342. [    1.630070] usbcore: registered new interface driver hub
  5343. [    1.635351] usbcore: registered new device driver usb
  5344. [    1.640400] media: Linux media interface: v0.10
  5345. [    1.644849] Linux video capture interface: v2.00
  5346. [    1.649437] pps_core: LinuxPPS API ver. 1 registered
  5347. [    1.654340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  5348. [    1.663433] PTP clock support registered
  5349. [    1.667334] EDAC MC: Ver: 3.0.0
  5350. [    1.670689] FPGA manager framework
  5351. [    1.674037] fpga-region fpga-full: FPGA Region probed
  5352. [    1.679038] Advanced Linux Sound Architecture Driver Initialized.
  5353. [    1.685295] Bluetooth: Core ver 2.22
  5354. [    1.688703] NET: Registered protocol family 31
  5355. [    1.693093] Bluetooth: HCI device and connection manager initialized
  5356. [    1.699411] Bluetooth: HCI socket layer initialized
  5357. [    1.704253] Bluetooth: L2CAP socket layer initialized
  5358. [    1.709278] Bluetooth: SCO socket layer initialized
  5359. [    1.714706] clocksource: Switched to clocksource arch_sys_counter
  5360. [    1.720702] VFS: Disk quotas dquot_6.6.0
  5361. [    1.724536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  5362. [    1.735577] NET: Registered protocol family 2
  5363. [    1.740128] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  5364. [    1.747244] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  5365. [    1.754015] TCP: Hash tables configured (established 16384 bind 16384)
  5366. [    1.760415] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  5367. [    1.766349] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  5368. [    1.772859] NET: Registered protocol family 1
  5369. [    1.777289] RPC: Registered named UNIX socket transport module.
  5370. [    1.783014] RPC: Registered udp transport module.
  5371. [    1.787684] RPC: Registered tcp transport module.
  5372. [    1.792352] RPC: Registered tcp NFSv4.1 backchannel transport module.
  5373. [    1.798896] Trying to unpack rootfs image as initramfs...
  5374. [    2.121995] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  5375. [    2.129420] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  5376. [    2.137724] futex hash table entries: 1024 (order: 5, 131072 bytes)
  5377. [    2.144386] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  5378. [    2.151311] NFS: Registering the id_resolver key type
  5379. [    2.156198] Key type id_resolver registered
  5380. [    2.160323] Key type id_legacy registered
  5381. [    2.164309] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  5382. [    2.170980] ntfs: driver 2.1.32 [Flags: R/W].
  5383. [    2.175305] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  5384. [    2.190072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  5385. [    2.197287] io scheduler noop registered
  5386. [    2.201169] io scheduler deadline registered
  5387. [    2.205413] io scheduler cfq registered (default)
  5388. [    2.210672] nwl-pcie fd0e0000.pcie: Link is UP
  5389. [    2.214960] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  5390. [    2.220562] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  5391. [    2.226430] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  5392. [    2.232654] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  5393. [    2.238715] pci_bus 0000:00: root bus resource [bus 00-ff]
  5394. [    2.244161] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  5395. [    2.250997] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  5396. [    2.258927] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  5397. [    2.265521] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  5398. [    2.272269] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  5399. [    2.277456] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  5400. [    2.284933] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  5401. [    2.291305] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  5402. [    2.298358] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  5403. [    2.305510] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  5404. [    2.312368] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  5405. [    2.319289] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  5406. [    2.326209] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  5407. [    2.333129] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  5408. [    2.340054] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  5409. [    2.346966] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  5410. [    2.353891] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  5411. [    2.360851] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  5412. [    2.367729] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  5413. [    2.374647] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  5414. [    2.381570] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  5415. [    2.388491] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  5416. [    2.395409] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  5417. [    2.402330] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  5418. [    2.409252] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  5419. [    2.437594] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  5420. [    2.445068] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  5421. [    2.454137] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢²?êconsole [ttyPS0] enabled
  5422. [    2.463082] console [ttyPS0] enabled
  5423. [    2.470048] bootconsole [cdns0] disabled
  5424. [    2.470048] bootconsole [cdns0] disabled
  5425. [    2.478108] Unable to detect cache hierarchy from DT for CPU 0
  5426. [    2.488391] brd: module loaded
  5427. [    2.494209] loop: module loaded
  5428. [    2.498188] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  5429. [    2.507066] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  5430. [    2.517811] scsi host0: ahci-ceva
  5431. [    2.521229] scsi host1: ahci-ceva
  5432. [    2.524566] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  5433. [    2.532396] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  5434. [    2.540431] mtdoops: mtd device (mtddev=name/number) must be supplied
  5435. [    2.547766] zynqmp-qspi ff0f0000.spi: rx bus width not found
  5436. [    2.553698] m25p80 spi0.0: found n25q00, expected n25q512a
  5437. [    2.559420] m25p80 spi0.0: n25q00 (131072 Kbytes)
  5438. [    2.564056] 5 ofpart partitions found on MTD device spi0.0
  5439. [    2.569501] Creating 5 MTD partitions on "spi0.0":
  5440. [    2.574278] 0x000000000000-0x000000500000 : "boot"
  5441. [    2.579542] 0x000000500000-0x000000540000 : "bootenv"
  5442. [    2.584927] 0x000000540000-0x000002740000 : "kernel"
  5443. [    2.590206] 0x000002740000-0x000003740000 : "user"
  5444. [    2.595326] 0x000003740000-0x000003750000 : "test"
  5445. [    2.601325] libphy: Fixed MDIO Bus: probed
  5446. [    2.606450] tun: Universal TUN/TAP device driver, 1.6
  5447. [    2.611419] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  5448. [    2.617699] CAN device driver interface
  5449. [    2.622020] macb ff0c0000.ethernet: Not enabling partial store and forward
  5450. [    2.629340] libphy: MACB_mii_bus: probed
  5451. [    2.706981] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  5452. [    2.716728] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  5453. [    2.729318] usbcore: registered new interface driver asix
  5454. [    2.734684] usbcore: registered new interface driver ax88179_178a
  5455. [    2.740730] usbcore: registered new interface driver cdc_ether
  5456. [    2.746546] usbcore: registered new interface driver net1080
  5457. [    2.752185] usbcore: registered new interface driver cdc_subset
  5458. [    2.758089] usbcore: registered new interface driver zaurus
  5459. [    2.763657] usbcore: registered new interface driver cdc_ncm
  5460. [    2.769616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  5461. [    2.776061] ehci-pci: EHCI PCI platform driver
  5462. [    2.780715] usbcore: registered new interface driver uas
  5463. [    2.785975] usbcore: registered new interface driver usb-storage
  5464. [    2.792214] mousedev: PS/2 mouse device common for all mice
  5465. [    2.798116] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  5466. [    2.805283] i2c /dev entries driver
  5467. [    2.808909] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  5468. [    2.814970] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  5469. [    2.821738] usbcore: registered new interface driver uvcvideo
  5470. [    2.827397] USB Video Class driver (1.1.1)
  5471. [    2.831829] Bluetooth: HCI UART driver ver 2.3
  5472. [    2.836191] Bluetooth: HCI UART protocol H4 registered
  5473. [    2.841307] Bluetooth: HCI UART protocol BCSP registered
  5474. [    2.846602] Bluetooth: HCI UART protocol LL registered
  5475. [    2.851722] Bluetooth: HCI UART protocol ATH3K registered
  5476. [    2.852917] ata2: SATA link down (SStatus 0 SControl 330)
  5477. [    2.862485] Bluetooth: HCI UART protocol Three-wire (H5) registered
  5478. [    2.868773] Bluetooth: HCI UART protocol Intel registered
  5479. [    2.874153] Bluetooth: HCI UART protocol Broadcom registered
  5480. [    2.879759] Bluetooth: HCI UART protocol QCA registered
  5481. [    2.885001] usbcore: registered new interface driver bcm203x
  5482. [    2.890641] usbcore: registered new interface driver bpa10x
  5483. [    2.896196] usbcore: registered new interface driver bfusb
  5484. [    2.901665] usbcore: registered new interface driver btusb
  5485. [    2.907102] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  5486. [    2.912795] usbcore: registered new interface driver ath3k
  5487. [    2.918330] EDAC MC: ECC not enabled
  5488. [    2.921962] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  5489. [    2.930997] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  5490. [    2.943291] sdhci: Secure Digital Host Controller Interface driver
  5491. [    2.949381] sdhci: Copyright(c) Pierre Ossman
  5492. [    2.953720] sdhci-pltfm: SDHCI platform and OF driver helper
  5493. [    3.006716] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  5494. [    3.010719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
  5495. [    3.010919] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
  5496. [    3.010922] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
  5497. [    3.011145] ata1.00: configured for UDMA/133
  5498. [    3.011456] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk SATA Sl 25   PQ: 0 ANSI: 5
  5499. [    3.046685] ledtrig-cpu: registered to indicate activity on CPUs
  5500. [    3.052743] usbcore: registered new interface driver usbhid
  5501. [    3.058229] usbhid: USB HID core driver
  5502. [    3.063654] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  5503. [    3.070520] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  5504. [    3.077683] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  5505. [    3.085039] PLL: shutdown
  5506. [    3.088476] Write failed to divider address:fd1a007c
  5507. [    3.093515] PLL: enable
  5508. [    3.096039] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  5509. [    3.104109] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  5510. [    3.113792] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  5511. [    3.115181] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
  5512. [    3.115277] sd 0:0:0:0: [sda] Write Protect is off
  5513. [    3.115324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  5514. [    3.116157]  sda: sda1
  5515. [    3.116696] sd 0:0:0:0: [sda] Attached SCSI disk
  5516. [    3.151929] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  5517. [    3.159391] pktgen: Packet Generator for packet performance testing. Version: 2.75
  5518. [    3.168831] Netfilter messages via NETLINK v0.30.
  5519. [    3.173580] ip_tables: (C) 2000-2006 Netfilter Core Team
  5520. [    3.178853] Initializing XFRM netlink socket
  5521. [    3.183236] NET: Registered protocol family 10
  5522. [    3.188078] ip6_tables: (C) 2000-2006 Netfilter Core Team
  5523. [    3.193438] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  5524. [    3.199654] NET: Registered protocol family 17
  5525. [    3.204022] NET: Registered protocol family 15
  5526. [    3.208447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  5527. [    3.221370] Ebtables v2.0 registered
  5528. [    3.224968] can: controller area network core (rev 20120528 abi 9)
  5529. [    3.231126] NET: Registered protocol family 29
  5530. [    3.235520] can: raw protocol (rev 20120528)
  5531. [    3.239770] can: broadcast manager protocol (rev 20161123 t)
  5532. [    3.245419] can: netlink gateway (rev 20130117) max_hops=1
  5533. [    3.252924] Bluetooth: RFCOMM TTY layer initialized
  5534. [    3.259730] Bluetooth: RFCOMM socket layer initialized
  5535. [    3.264788] Bluetooth: RFCOMM ver 1.11
  5536. [    3.268513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  5537. [    3.273803] Bluetooth: BNEP filters: protocol multicast
  5538. [    3.279016] Bluetooth: BNEP socket layer initialized
  5539. [    3.283960] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  5540. [    3.289864] Bluetooth: HIDP socket layer initialized
  5541. [    3.295001] 9pnet: Installing 9P2000 support
  5542. [    3.299203] Key type dns_resolver registered
  5543. [    3.303838] registered taskstats version 1
  5544. [    3.310226] Btrfs loaded, crc32c=crc32c-generic
  5545. [    3.327943] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  5546. [    3.333369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  5547. [    3.343252] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  5548. [    3.353916] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  5549. [    3.361959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  5550. [    3.370671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  5551. [    3.379821] usb usb1: Product: xHCI Host Controller
  5552. [    3.384617] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  5553. [    3.389908] usb usb1: SerialNumber: xhci-hcd.0.auto
  5554. [    3.397006] hub 1-0:1.0: USB hub found
  5555. [    3.400692] hub 1-0:1.0: 1 port detected
  5556. [    3.404698] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  5557. [    3.410109] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  5558. [    3.417782] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  5559. [    3.425874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  5560. [    3.432582] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  5561. [    3.439784] usb usb2: Product: xHCI Host Controller
  5562. [    3.446652] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  5563. [    3.453881] usb usb2: SerialNumber: xhci-hcd.0.auto
  5564. [    3.458913] hub 2-0:1.0: USB hub found
  5565. [    3.462586] hub 2-0:1.0: 1 port detected
  5566. [    3.468892] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  5567. [    3.479109] clk: Not disabling unused clocks
  5568. [    3.483293] ALSA device list:
  5569. [    3.486234]   #0: DisplayPort monitor
  5570. [    3.490508] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  5571. INIT: version 2.88 booting
  5572. Starting udev
  5573. [    3.605615] udevd[1623]: starting version 3.2
  5574. [    3.610243] random: udevd: uninitialized urandom read (16 bytes read)
  5575. [    3.616682] random: udevd: uninitialized urandom read (16 bytes read)
  5576. [    3.623091] random: udevd: uninitialized urandom read (16 bytes read)
  5577. [    3.629484] random: udevd: uninitialized urandom read (16 bytes read)
  5578. [    3.639517] udevd[1624]: starting eudev-3.2
  5579. [    3.683049] random: udevd: uninitialized urandom read (16 bytes read)
  5580. [    3.692704] random: udevd: uninitialized urandom read (16 bytes read)
  5581. [    3.702387] 4fm: loading out-of-tree module taints kernel.
  5582. [    3.712544] pci 0000:00:00.0: enabling device (0000 -> 0002)
  5583. [    3.718214] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  5584. [    3.722158] <dma1> init: registered
  5585. [    3.727308] Accessing 47232 of total 1 entries in dev->bar
  5586. [    3.732795] dev->bar[u].virt_address:cfb607c value:38011121
  5587. [    3.738329] dev->bar[u].virt_address:cfb6080 value:deadbeef
  5588. [    3.743861] dev->bar[u].virt_address:cfb6084 value:baadf00d
  5589. [    3.749408] dev->bar[u].virt_address:cfb6088 value:eba00eba
  5590. [    3.754951] dev->bar[u].virt_address:cfb608c value:beefdeaf
  5591. [    3.762298] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  5592. [    3.766246] <dma2> init: registered
  5593. [    4.016071] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  5594. Populating dev cache
  5595. [    4.283141] random: dd: uninitialized urandom read (512 bytes read)
  5596. Thu Jul 26 08:51:43 UTC 2018
  5597. Starting internet superserver: inetd.
  5598. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  5599. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  5600. INIT: Entering runlevel: 5
  5601. Hello World
  5602. [22]:0x12
  5603. [20]:0x201
  5604. [20]:0x201
  5605. [22]:0x1
  5606. [0]:0x140
  5607. [0]:0x140
  5608. Configuring network interfaces... [    4.583100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  5609. done.
  5610. Starting Dropbear SSH server: [    4.611822] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5611. [    4.621843] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5612. Generating key, this may take a while...
  5613. [    5.618826] macb ff0c0000.ethernet eth0: link up (1000/Full)
  5614. [    5.624430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  5615. [    5.953948] random: dropbearkey: uninitialized urandom read (32 bytes read)
  5616. Public key portion is:
  5617. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCYpDFtnpQnJ10InGM5VllnTXDseI+Axk4ldiB1R7ZpX1HeKgSx+QSMIpNjZPNGL7nCl1tiuck8+iS4nA3R7Ddrc6oaJDhljsnm3pyFM2q8Ad3ThEzKAt/DNb1iehhncRapRpJpESeMhXrqqWU3FxGkmqBXpWWVAvClnzcwrW6NjrFp3NiTIPLDfhLaOrORN4xm/sYRPnumVMqj2RKZHwuWvZaycigSQ/6NvcVm4q7oWT/NnI7oZEgGO7EX0aQPeY/IDNMtTKJfZU6qIdYOY1M5Yy3j2upUh7TFlcAzlu6+EAdQiBkVs6ZABtmQqhCIEMlJyYZxi9b2beGmpgb/gvnb root@VP88x_2017_3_PRJ0191
  5618. Fingerprint: md5 11:d9:44:ae:8d:9c:4f:4d:49:cc:ed:55:c6:9[    6.006926] random: fast init done
  5619. 3:d0:90
  5620. dropbear.
  5621. Starting syslogd/klogd: done
  5622. [    6.456854] random: crng init done
  5623. [    8.248403] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  5624. hello world.....
  5625. Starting tcf-agent: OK
  5626.  
  5627. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  5628. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  5629.  
  5630. Global Units:
  5631. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  5632. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  5633. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  5634. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  5635. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  5636. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  5637.  
  5638.  
  5639. Running 'VP880-FMC134' on PCIe, CID725
  5640.  
  5641. -----------------------------------------------------------
  5642. Device 'VP880' (P0)
  5643. -----------------------------------------------------------
  5644. Constellation ID   : 759
  5645. Number Of Stars    : 19
  5646. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  5647. Firmware Build Code: 0
  5648. Firmware Revision  : 1.2
  5649. -----------------------------------------------------------
  5650.  
  5651.     - Unit 0 is VP88x host interface star
  5652.  
  5653. -------- Onboard Monitoring (ADC Monitor) ---------
  5654. Temp (       AD7291  ) : OK    (53.50C)
  5655. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  5656. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  5657. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  5658. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  5659. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  5660. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  5661.  
  5662. Vin6 ( ADC0     raw  ) : OK    (0.682V)
  5663. Vin6 ( ADC0    Temp  ) : OK    (67.27C)
  5664.  
  5665. Vin7 ( ADC1     raw  ) : OK    (0.684V)
  5666. Vin7 ( ADC1    Temp  ) : OK    (66.50C)
  5667. ---------------------------------------------------
  5668.  
  5669.  
  5670. -------- Onboard Monitoring (Voltage Monitor) ---------
  5671. Temp (   AD7291  ) : OK    (52.50C)
  5672. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  5673. Vin1 (  3.3Vclk  ) : OK    ( 3.25V)
  5674. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  5675. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  5676. Vin4 (     Vadj  ) : OK    ( 1.81V)
  5677. Vin5 (  3.3Vfmc  ) : OK    ( 3.25V)
  5678. Vin6 ( 12.0Vfmc  ) : OK    (11.96V)
  5679. Vin7 (     Viob  ) : OK    ( 1.81V)
  5680. -------------------------------------------------------
  5681.  
  5682. Configuring clock tree ...
  5683.  
  5684.  
  5685.  Setting Clock_Mode
  5686. Internal Reference Mode
  5687. Xilinx Zynq MP First Stage Boot Loader
  5688. Release 2017.3   May 24 2018  -  10:35:53
  5689. Marvell PHY reset
  5690. SI5338 0x70 not configured
  5691. SI5338 0x70 configuration finished
  5692. SI5338 0x71 not configured
  5693. SI5338 0x71 configuration finished
  5694. Xilinx Zynq MP First Stage Boot Loader
  5695. Release 2017.3   May 24 2018  -  10:35:53
  5696. Marvell PHY reset
  5697. SI5338 0x70 not configured
  5698. SI5338 0x70 configuration finished
  5699. SI5338 0x71 not configured
  5700. SI5338 0x71 configuration finished
  5701.  
  5702.  
  5703. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  5704.  
  5705. I2C:   ready
  5706. DRAM:  2 GiB
  5707. EL Level:       EL2
  5708. Chip ID:        xczu3eg
  5709. MMC:   Card did not respond to voltage select!
  5710. sdhci@ff160000 - probe failed: -95
  5711. Card did not respond to voltage select!
  5712.  
  5713. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  5714. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  5715. *** Warning - bad CRC, using default environment
  5716.  
  5717. In:    serial
  5718. Out:   serial
  5719. Err:   serial
  5720. Bootmode: QSPI_MODE
  5721. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  5722. eth0: ethernet@ff0c0000
  5723. U-BOOT for VP88x_2017_3_PRJ0191
  5724.  
  5725. Hit any key to stop autoboot:  0
  5726. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  5727. device 0 offset 0x540000, size 0x2200000
  5728. SF: 35651584 bytes @ 0x540000 Read: OK
  5729. ## Loading kernel from FIT Image at 10000000 ...
  5730.    Using 'conf@1' configuration
  5731.    Trying 'kernel@0' kernel subimage
  5732.      Description:  Linux Kernel
  5733.      Type:         Kernel Image
  5734.      Compression:  uncompressed
  5735.      Data Start:   0x100000d8
  5736.      Data Size:    12503552 Bytes = 11.9 MiB
  5737.      Architecture: AArch64
  5738.      OS:           Linux
  5739.      Load Address: 0x00080000
  5740.      Entry Point:  0x00080000
  5741.      Hash algo:    sha1
  5742.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  5743.    Verifying Hash Integrity ... sha1+ OK
  5744. ## Loading ramdisk from FIT Image at 10000000 ...
  5745.    Using 'conf@1' configuration
  5746.    Trying 'ramdisk@0' ramdisk subimage
  5747.      Description:  ramdisk
  5748.      Type:         RAMDisk Image
  5749.      Compression:  uncompressed
  5750.      Data Start:   0x10bf54e4
  5751.      Data Size:    8973721 Bytes = 8.6 MiB
  5752.      Architecture: AArch64
  5753.      OS:           Linux
  5754.      Load Address: unavailable
  5755.      Entry Point:  unavailable
  5756.      Hash algo:    sha1
  5757.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  5758.    Verifying Hash Integrity ... sha1+ OK
  5759. ## Loading fdt from FIT Image at 10000000 ...
  5760.    Using 'conf@1' configuration
  5761.    Trying 'fdt@0' fdt subimage
  5762.      Description:  Flattened Device Tree blob
  5763.      Type:         Flat Device Tree
  5764.      Compression:  uncompressed
  5765.      Data Start:   0x10becbd0
  5766.      Data Size:    34910 Bytes = 34.1 KiB
  5767.      Architecture: AArch64
  5768.      Hash algo:    sha1
  5769.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  5770.    Verifying Hash Integrity ... sha1+ OK
  5771.    Booting using the fdt blob at 0x10becbd0
  5772.    Loading Kernel Image ... OK
  5773.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  5774.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  5775.  
  5776. Starting kernel ...
  5777.  
  5778. [    0.000000] Booting Linux on physical CPU 0x0
  5779. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  5780. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  5781. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  5782. [    0.000000] bootconsole [cdns0] enabled
  5783. [    0.000000] efi: Getting EFI parameters from FDT:
  5784. [    0.000000] efi: UEFI not found.
  5785. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  5786. [    0.000000] psci: probing for conduit method from DT.
  5787. [    0.000000] psci: PSCIv1.0 detected in firmware.
  5788. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  5789. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  5790. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  5791. [    0.000000] Detected VIPT I-cache on CPU0
  5792. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  5793. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  5794. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  5795. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  5796. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  5797. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  5798. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  5799. [    0.000000] Virtual kernel memory layout:
  5800. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  5801. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  5802. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  5803. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  5804. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  5805. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  5806. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  5807. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  5808. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  5809. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  5810. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  5811. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  5812. [    0.000000] Hierarchical RCU implementation.
  5813. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  5814. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  5815. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  5816. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  5817. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  5818. [    0.000000] GIC: Using split EOI/Deactivate mode
  5819. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  5820. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  5821. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  5822. [    0.008261] Console: colour dummy device 80x25
  5823. [    0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  5824. [    0.022886] pid_max: default: 32768 minimum: 301
  5825. [    0.027580] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  5826. [    0.034138] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  5827. [    0.041866] ASID allocator initialised with 65536 entries
  5828. [    0.047560] zynqmp_plat_init Power management API v0.3
  5829. [    0.052578] EFI services will not be available.
  5830. [    0.057343] Detected VIPT I-cache on CPU1
  5831. [    0.057377] CPU1: Booted secondary processor [410fd034]
  5832. [    0.057639] Detected VIPT I-cache on CPU2
  5833. [    0.057655] CPU2: Booted secondary processor [410fd034]
  5834. [    0.057907] Detected VIPT I-cache on CPU3
  5835. [    0.057923] CPU3: Booted secondary processor [410fd034]
  5836. [    0.057956] Brought up 4 CPUs
  5837. [    0.088237] SMP: Total of 4 processors activated.
  5838. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  5839. [    0.098710] CPU: All CPU(s) started at EL2
  5840. [    0.102783] alternatives: patching kernel code
  5841. [    0.108042] devtmpfs: initialized
  5842. [    0.115566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  5843. [    0.136574] xor: measuring software checksum speed
  5844. [    0.181245]    8regs     :  2543.000 MB/sec
  5845. [    0.221270]    8regs_prefetch:  2266.000 MB/sec
  5846. [    0.265638]    32regs    :  3125.000 MB/sec
  5847. [    0.305665]    32regs_prefetch:  2627.000 MB/sec
  5848. [    0.310087] xor: using function: 32regs (3125.000 MB/sec)
  5849. [    0.315543] pinctrl core: initialized pinctrl subsystem
  5850. [    0.321224] NET: Registered protocol family 16
  5851. [    0.326322] Failed to initialise IOMMU /amba/smmu@fd800000
  5852. [    0.331828] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  5853. [    0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  5854. [    0.374347] DMA: preallocated 65536 KiB pool for atomic allocations
  5855. [    0.390740] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  5856. [    0.398220] ARM CCI_400_r1 PMU driver probed[    0.405002] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  5857. [    0.435709] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  5858. [    0.508900] raid6: int64x1  gen()   447 MB/s
  5859. [    0.580917] raid6: int64x1  xor()   486 MB/s
  5860. [    0.652962] raid6: int64x2  gen()   741 MB/s
  5861. [    0.725010] raid6: int64x2  xor()   661 MB/s
  5862. [    0.797056] raid6: int64x4  gen()  1086 MB/s
  5863. [    0.869081] raid6: int64x4  xor()   810 MB/s
  5864. [    0.941150] raid6: int64x8  gen()  1266 MB/s
  5865. [    1.013183] raid6: int64x8  xor()   824 MB/s
  5866. [    1.085239] raid6: neonx1   gen()   797 MB/s
  5867. [    1.157257] raid6: neonx1   xor()   837 MB/s
  5868. [    1.229325] raid6: neonx2   gen()  1286 MB/s
  5869. [    1.301332] raid6: neonx2   xor()  1143 MB/s
  5870. [    1.373384] raid6: neonx4   gen()  1665 MB/s
  5871. [    1.445417] raid6: neonx4   xor()  1300 MB/s
  5872. [    1.517479] raid6: neonx8   gen()  1752 MB/s
  5873. [    1.589499] raid6: neonx8   xor()  1348 MB/s
  5874. [    1.593574] raid6: using algorithm neonx8 gen() 1752 MB/s
  5875. [    1.598936] raid6: .... xor() 1348 MB/s, rmw enabled
  5876. [    1.603866] raid6: using intx1 recovery algorithm
  5877. [    1.609024] Write failed gate address:1000f02
  5878. [    1.616995] SCSI subsystem initialized
  5879. [    1.620774] usbcore: registered new interface driver usbfs
  5880. [    1.626106] usbcore: registered new interface driver hub
  5881. [    1.631383] usbcore: registered new device driver usb
  5882. [    1.636434] media: Linux media interface: v0.10
  5883. [    1.640880] Linux video capture interface: v2.00
  5884. [    1.645464] pps_core: LinuxPPS API ver. 1 registered
  5885. [    1.650370] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  5886. [    1.659462] PTP clock support registered
  5887. [    1.663364] EDAC MC: Ver: 3.0.0
  5888. [    1.666727] FPGA manager framework
  5889. [    1.670069] fpga-region fpga-full: FPGA Region probed
  5890. [    1.675081] Advanced Linux Sound Architecture Driver Initialized.
  5891. [    1.681332] Bluetooth: Core ver 2.22
  5892. [    1.684742] NET: Registered protocol family 31
  5893. [    1.689131] Bluetooth: HCI device and connection manager initialized
  5894. [    1.695450] Bluetooth: HCI socket layer initialized
  5895. [    1.700292] Bluetooth: L2CAP socket layer initialized
  5896. [    1.705317] Bluetooth: SCO socket layer initialized
  5897. [    1.710718] clocksource: Switched to clocksource arch_sys_counter
  5898. [    1.716719] VFS: Disk quotas dquot_6.6.0
  5899. [    1.720549] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  5900. [    1.730811] NET: Registered protocol family 2
  5901. [    1.735370] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  5902. [    1.742488] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  5903. [    1.749271] TCP: Hash tables configured (established 16384 bind 16384)
  5904. [    1.755670] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  5905. [    1.761603] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  5906. [    1.768109] NET: Registered protocol family 1
  5907. [    1.772610] RPC: Registered named UNIX socket transport module.
  5908. [    1.778335] RPC: Registered udp transport module.
  5909. [    1.783003] RPC: Registered tcp transport module.
  5910. [    1.787672] RPC: Registered tcp NFSv4.1 backchannel transport module.
  5911. [    1.794231] Trying to unpack rootfs image as initramfs...
  5912. [    2.117722] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  5913. [    2.125144] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  5914. [    2.133456] futex hash table entries: 1024 (order: 5, 131072 bytes)
  5915. [    2.140124] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  5916. [    2.147068] NFS: Registering the id_resolver key type
  5917. [    2.151944] Key type id_resolver registered
  5918. [    2.156076] Key type id_legacy registered
  5919. [    2.160062] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  5920. [    2.166732] ntfs: driver 2.1.32 [Flags: R/W].
  5921. [    2.171061] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  5922. [    2.185709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  5923. [    2.192917] io scheduler noop registered
  5924. [    2.196805] io scheduler deadline registered
  5925. [    2.201046] io scheduler cfq registered (default)
  5926. [    2.206302] nwl-pcie fd0e0000.pcie: Link is UP
  5927. [    2.210591] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  5928. [    2.216193] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  5929. [    2.222061] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  5930. [    2.228282] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  5931. [    2.234348] pci_bus 0000:00: root bus resource [bus 00-ff]
  5932. [    2.239792] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  5933. [    2.246625] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  5934. [    2.254561] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  5935. [    2.261153] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  5936. [    2.267901] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  5937. [    2.273088] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  5938. [    2.280564] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  5939. [    2.286931] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  5940. [    2.293981] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  5941. [    2.301134] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  5942. [    2.307991] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  5943. [    2.314912] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  5944. [    2.321830] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  5945. [    2.328754] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  5946. [    2.335673] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  5947. [    2.342590] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  5948. [    2.349513] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  5949. [    2.356469] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  5950. [    2.363353] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  5951. [    2.370271] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  5952. [    2.377193] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  5953. [    2.384112] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  5954. [    2.391032] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  5955. [    2.397961] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  5956. [    2.404875] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  5957. [    2.433081] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  5958. [    2.440560] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  5959. [    2.449621] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªÂª²ºêconsole [ttyPS0] enabled
  5960. [    2.458567] console [ttyPS0] enabled
  5961. [    2.465533] bootconsole [cdns0] disabled
  5962. [    2.465533] bootconsole [cdns0] disabled
  5963. [    2.473611] Unable to detect cache hierarchy from DT for CPU 0
  5964. [    2.484138] brd: module loaded
  5965. [    2.489939] loop: module loaded
  5966. [    2.493920] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  5967. [    2.502804] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  5968. [    2.513561] scsi host0: ahci-ceva
  5969. [    2.516975] scsi host1: ahci-ceva
  5970. [    2.520318] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  5971. [    2.528150] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  5972. [    2.536204] mtdoops: mtd device (mtddev=name/number) must be supplied
  5973. [    2.543534] zynqmp-qspi ff0f0000.spi: rx bus width not found
  5974. [    2.549461] m25p80 spi0.0: found n25q00, expected n25q512a
  5975. [    2.555156] m25p80 spi0.0: n25q00 (131072 Kbytes)
  5976. [    2.559790] 5 ofpart partitions found on MTD device spi0.0
  5977. [    2.565238] Creating 5 MTD partitions on "spi0.0":
  5978. [    2.570015] 0x000000000000-0x000000500000 : "boot"
  5979. [    2.575290] 0x000000500000-0x000000540000 : "bootenv"
  5980. [    2.580667] 0x000000540000-0x000002740000 : "kernel"
  5981. [    2.585951] 0x000002740000-0x000003740000 : "user"
  5982. [    2.591075] 0x000003740000-0x000003750000 : "test"
  5983. [    2.596965] libphy: Fixed MDIO Bus: probed
  5984. [    2.602136] tun: Universal TUN/TAP device driver, 1.6
  5985. [    2.607114] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  5986. [    2.613394] CAN device driver interface
  5987. [    2.617735] macb ff0c0000.ethernet: Not enabling partial store and forward
  5988. [    2.625036] libphy: MACB_mii_bus: probed
  5989. [    2.702992] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  5990. [    2.712735] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  5991. [    2.725334] usbcore: registered new interface driver asix
  5992. [    2.730698] usbcore: registered new interface driver ax88179_178a
  5993. [    2.736745] usbcore: registered new interface driver cdc_ether
  5994. [    2.742560] usbcore: registered new interface driver net1080
  5995. [    2.748206] usbcore: registered new interface driver cdc_subset
  5996. [    2.754104] usbcore: registered new interface driver zaurus
  5997. [    2.759673] usbcore: registered new interface driver cdc_ncm
  5998. [    2.765627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  5999. [    2.772067] ehci-pci: EHCI PCI platform driver
  6000. [    2.776717] usbcore: registered new interface driver uas
  6001. [    2.781977] usbcore: registered new interface driver usb-storage
  6002. [    2.788228] mousedev: PS/2 mouse device common for all mice
  6003. [    2.794120] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  6004. [    2.801289] i2c /dev entries driver
  6005. [    2.804919] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  6006. [    2.810968] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  6007. [    2.817737] usbcore: registered new interface driver uvcvideo
  6008. [    2.823401] USB Video Class driver (1.1.1)
  6009. [    2.827834] Bluetooth: HCI UART driver ver 2.3
  6010. [    2.832196] Bluetooth: HCI UART protocol H4 registered
  6011. [    2.837313] Bluetooth: HCI UART protocol BCSP registered
  6012. [    2.842608] Bluetooth: HCI UART protocol LL registered
  6013. [    2.847728] Bluetooth: HCI UART protocol ATH3K registered
  6014. [    2.853110] Bluetooth: HCI UART protocol Three-wire (H5) registered
  6015. [    2.854424] ata2: SATA link down (SStatus 0 SControl 330)
  6016. [    2.856888] ata1: SATA link down (SStatus 0 SControl 330)
  6017. [    2.870160] Bluetooth: HCI UART protocol Intel registered
  6018. [    2.875540] Bluetooth: HCI UART protocol Broadcom registered
  6019. [    2.881147] Bluetooth: HCI UART protocol QCA registered
  6020. [    2.886390] usbcore: registered new interface driver bcm203x
  6021. [    2.892030] usbcore: registered new interface driver bpa10x
  6022. [    2.897583] usbcore: registered new interface driver bfusb
  6023. [    2.903051] usbcore: registered new interface driver btusb
  6024. [    2.908489] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  6025. [    2.914184] usbcore: registered new interface driver ath3k
  6026. [    2.919717] EDAC MC: ECC not enabled
  6027. [    2.923348] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  6028. [    2.932382] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  6029. [    2.944674] sdhci: Secure Digital Host Controller Interface driver
  6030. [    2.950769] sdhci: Copyright(c) Pierre Ossman
  6031. [    2.955108] sdhci-pltfm: SDHCI platform and OF driver helper
  6032. [    3.006728] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  6033. [    3.014846] ledtrig-cpu: registered to indicate activity on CPUs
  6034. [    3.020891] usbcore: registered new interface driver usbhid
  6035. [    3.026373] usbhid: USB HID core driver
  6036. [    3.031776] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  6037. [    3.038666] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  6038. [    3.045835] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  6039. [    3.053177] PLL: shutdown
  6040. [    3.056607] Write failed to divider address:fd1a007c
  6041. [    3.061640] PLL: enable
  6042. [    3.064165] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  6043. [    3.072208] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  6044. [    3.081882] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  6045. [    3.091725] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  6046. [    3.099154] pktgen: Packet Generator for packet performance testing. Version: 2.75
  6047. [    3.109602] Netfilter messages via NETLINK v0.30.
  6048. [    3.114356] ip_tables: (C) 2000-2006 Netfilter Core Team
  6049. [    3.119629] Initializing XFRM netlink socket
  6050. [    3.124829] NET: Registered protocol family 10
  6051. [    3.129660] ip6_tables: (C) 2000-2006 Netfilter Core Team
  6052. [    3.135022] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  6053. [    3.141242] NET: Registered protocol family 17
  6054. [    3.145612] NET: Registered protocol family 15
  6055. [    3.150041] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  6056. [    3.162963] Ebtables v2.0 registered
  6057. [    3.166567] can: controller area network core (rev 20120528 abi 9)
  6058. [    3.172720] NET: Registered protocol family 29
  6059. [    3.177113] can: raw protocol (rev 20120528)
  6060. [    3.181362] can: broadcast manager protocol (rev 20161123 t)
  6061. [    3.187006] can: netlink gateway (rev 20130117) max_hops=1
  6062. [    3.194521] Bluetooth: RFCOMM TTY layer initialized
  6063. [    3.201326] Bluetooth: RFCOMM socket layer initialized
  6064. [    3.206392] Bluetooth: RFCOMM ver 1.11
  6065. [    3.212123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  6066. [    3.217352] Bluetooth: BNEP filters: protocol multicast
  6067. [    3.222561] Bluetooth: BNEP socket layer initialized
  6068. [    3.227505] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  6069. [    3.233410] Bluetooth: HIDP socket layer initialized
  6070. [    3.238532] 9pnet: Installing 9P2000 support
  6071. [    3.242729] Key type dns_resolver registered
  6072. [    3.247373] registered taskstats version 1
  6073. [    3.251957] Btrfs loaded, crc32c=crc32c-generic
  6074. [    3.265140] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  6075. [    3.270566] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  6076. [    3.278436] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  6077. [    3.287091] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  6078. [    3.293161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  6079. [    3.299866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  6080. [    3.307068] usb usb1: Product: xHCI Host Controller
  6081. [    3.311926] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  6082. [    3.317225] usb usb1: SerialNumber: xhci-hcd.0.auto
  6083. [    3.322401] hub 1-0:1.0: USB hub found
  6084. [    3.326087] hub 1-0:1.0: 1 port detected
  6085. [    3.330090] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  6086. [    3.335491] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  6087. [    3.343166] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  6088. [    3.351259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  6089. [    3.357968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  6090. [    3.365170] usb usb2: Product: xHCI Host Controller
  6091. [    3.370030] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  6092. [    3.375325] usb usb2: SerialNumber: xhci-hcd.0.auto
  6093. [    3.380393] hub 2-0:1.0: USB hub found
  6094. [    3.384075] hub 2-0:1.0: 1 port detected
  6095. [    3.388358] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  6096. [    3.396557] clk: Not disabling unused clocks
  6097. [    3.400744] ALSA device list:
  6098. [    3.403692]   #0: DisplayPort monitor
  6099. [    3.407960] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  6100. INIT: version 2.88 booting
  6101. Starting udev
  6102. [    3.520933] udevd[1613]: starting version 3.2
  6103. [    3.525582] random: udevd: uninitialized urandom read (16 bytes read)
  6104. [    3.532018] random: udevd: uninitialized urandom read (16 bytes read)
  6105. [    3.538437] random: udevd: uninitialized urandom read (16 bytes read)
  6106. [    3.544917] random: udevd: uninitialized urandom read (16 bytes read)
  6107. [    3.554997] udevd[1614]: starting eudev-3.2
  6108. [    3.599391] random: udevd: uninitialized urandom read (16 bytes read)
  6109. [    3.607743] random: udevd: uninitialized urandom read (16 bytes read)
  6110. [    3.610076] 4fm: loading out-of-tree module taints kernel.
  6111. [    3.610928] pci 0000:00:00.0: enabling device (0000 -> 0002)
  6112. [    3.610940] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  6113. [    3.610949] Accessing 47232 of total 1 entries in dev->bar
  6114. [    3.610974] dev->bar[u].virt_address:cf3d07c value:38011121
  6115. [    3.610976] dev->bar[u].virt_address:cf3d080 value:deadbeef
  6116. [    3.610979] dev->bar[u].virt_address:cf3d084 value:baadf00d
  6117. [    3.610981] dev->bar[u].virt_address:cf3d088 value:eba00eba
  6118. [    3.610983] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  6119. [    3.612011] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  6120. [    3.695038] <dma1> init: registered
  6121. [    3.708578] <dma2> init: registered
  6122. Populating dev cache
  6123. [    4.184381] random: dd: uninitialized urandom read (512 bytes read)
  6124. Thu Jul 26 08:51:43 UTC 2018
  6125. Starting internet superserver: inetd.
  6126. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  6127. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  6128. INIT: Entering runlevel: 5
  6129. Hello World
  6130. [22]:0x12
  6131. [20]:0x201
  6132. [20]:0x201
  6133. [22]:0x1
  6134. [0]:0x140
  6135. [0]:0x140
  6136. Configuring network interfaces... [    4.484284] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  6137. done.
  6138. Starting Dropbear SSH server: [    4.512784] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6139. [    4.522889] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6140. Generating key, this may take a while...
  6141. [    5.490837] macb ff0c0000.ethernet eth0: link up (1000/Full)
  6142. [    5.496435] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  6143. [    8.042218] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6144. Public key portion is:
  6145. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCIyOVMEt3ygQG5QhwbdnZVcTqi446YDaTr9AUUkuWufOZu8cwQY7h/rosTUPhiZlK2ANNGtkRnoApOveN0d/fh/g3YzqpbfKdePwgVNhefkaXLTA6xfuQ4MCvJHeMWpSTl2ilbqoTcFSHYtFhd63SWg9bhP3jhLtKNfyNaovawJUkhq8LoYNSP23jMQMFZ4esguw1ui6PzrAGnGNFbVC+G7VQFO6yTxW2+IsdtoQwG7oEyEYRL2LNzVvwo3DhCbScMPbl5Fp1MkXIDEeMPa3uC/jtBoCCnEGG6G1tUi7CMAAzdd4aEMoema/3kW70LMZx9YyzZRn7detRnDCzDxZ9z root@VP88x_2017_3_PRJ0191
  6146. Fingerprint: md5 8e:e7:81:d4:15:f4:46:04:d5:d2:59[    8.094564] random: fast init done
  6147. :ee:d4:01:a3:08
  6148. dropbear.
  6149. Starting syslogd/klogd: done
  6150. [    8.545377] random: crng init done
  6151. [   10.337979] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  6152. hello world.....
  6153. Starting tcf-agent: OK
  6154.  
  6155. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  6156. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  6157.  
  6158. Global Units:
  6159. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  6160. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  6161. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  6162. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  6163. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  6164. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  6165.  
  6166.  
  6167. Running 'VP880-FMC134' on PCIe, CID725
  6168.  
  6169. -----------------------------------------------------------
  6170. Device 'VP880' (P0)
  6171. -----------------------------------------------------------
  6172. Constellation ID   : 759
  6173. Number Of Stars    : 19
  6174. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  6175. Firmware Build Code: 0
  6176. Firmware Revision  : 1.2
  6177. -----------------------------------------------------------
  6178.  
  6179.     - Unit 0 is VP88x host interface star
  6180.  
  6181. -------- Onboard Monitoring (ADC Monitor) ---------
  6182. Temp (       AD7291  ) : OK    (52.50C)
  6183. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  6184. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  6185. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  6186. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  6187. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  6188. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  6189.  
  6190. Vin6 ( ADC0     raw  ) : OK    (0.685V)
  6191. Vin6 ( ADC0    Temp  ) : OK    (65.74C)
  6192.  
  6193. Vin7 ( ADC1     raw  ) : OK    (0.685V)
  6194. Vin7 ( ADC1    Temp  ) : OK    (65.36C)
  6195. ---------------------------------------------------
  6196.  
  6197.  
  6198. -------- Onboard Monitoring (Voltage Monitor) ---------
  6199. Temp (   AD7291  ) : OK    (52.00C)
  6200. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  6201. Vin1 (  3.3Vclk  ) : OK    ( 3.24V)
  6202. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  6203. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  6204. Vin4 (     Vadj  ) : OK    ( 1.81V)
  6205. Vin5 (  3.3Vfmc  ) : OK    ( 3.25V)
  6206. Vin6 ( 12.0Vfmc  ) : OK    (11.95V)
  6207. Vin7 (     Viob  ) : OK    ( 1.81V)
  6208. -------------------------------------------------------
  6209.  
  6210. Configuring clock tree ...
  6211.  
  6212.  
  6213.  Setting Clock_Mode
  6214. Internal Reference Mode
  6215. Using LMX2581 PLL as Clock Source
  6216. Xilinx Zynq MP First Stage Boot Loader
  6217. Release 2017.3   May 24 2018  -  10:35:53
  6218. Marvell PHY reset
  6219. SI5338 0x70 not configured
  6220. SI5338 0x70 configuration finished
  6221. SI5338 0x71 not configured
  6222. SI5338 0x71 configuration finished
  6223.  
  6224.  
  6225. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  6226.  
  6227. I2C:   ready
  6228. DRAM:  2 GiB
  6229. EL Level:       EL2
  6230. Chip ID:        xczu3eg
  6231. MMC:   Card did not respond to voltage select!
  6232. sdhci@ff160000 - probe failed: -95
  6233. Card did not respond to voltage select!
  6234.  
  6235. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  6236. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  6237. *** Warning - bad CRC, using default environment
  6238.  
  6239. In:    serial
  6240. Out:   serial
  6241. Err:   serial
  6242. Bootmode: QSPI_MODE
  6243. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  6244. eth0: ethernet@ff0c0000
  6245. U-BOOT for VP88x_2017_3_PRJ0191
  6246.  
  6247. Hit any key to stop autoboot:  0
  6248. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  6249. device 0 offset 0x540000, size 0x2200000
  6250. SF: 35651584 bytes @ 0x540000 Read: OK
  6251. ## Loading kernel from FIT Image at 10000000 ...
  6252.    Using 'conf@1' configuration
  6253.    Trying 'kernel@0' kernel subimage
  6254.      Description:  Linux Kernel
  6255.      Type:         Kernel Image
  6256.      Compression:  uncompressed
  6257.      Data Start:   0x100000d8
  6258.      Data Size:    12503552 Bytes = 11.9 MiB
  6259.      Architecture: AArch64
  6260.      OS:           Linux
  6261.      Load Address: 0x00080000
  6262.      Entry Point:  0x00080000
  6263.      Hash algo:    sha1
  6264.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  6265.    Verifying Hash Integrity ... sha1+ OK
  6266. ## Loading ramdisk from FIT Image at 10000000 ...
  6267.    Using 'conf@1' configuration
  6268.    Trying 'ramdisk@0' ramdisk subimage
  6269.      Description:  ramdisk
  6270.      Type:         RAMDisk Image
  6271.      Compression:  uncompressed
  6272.      Data Start:   0x10bf54e4
  6273.      Data Size:    8973721 Bytes = 8.6 MiB
  6274.      Architecture: AArch64
  6275.      OS:           Linux
  6276.      Load Address: unavailable
  6277.      Entry Point:  unavailable
  6278.      Hash algo:    sha1
  6279.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  6280.    Verifying Hash Integrity ... sha1+ OK
  6281. ## Loading fdt from FIT Image at 10000000 ...
  6282.    Using 'conf@1' configuration
  6283.    Trying 'fdt@0' fdt subimage
  6284.      Description:  Flattened Device Tree blob
  6285.      Type:         Flat Device Tree
  6286.      Compression:  uncompressed
  6287.      Data Start:   0x10becbd0
  6288.      Data Size:    34910 Bytes = 34.1 KiB
  6289.      Architecture: AArch64
  6290.      Hash algo:    sha1
  6291.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  6292.    Verifying Hash Integrity ... sha1+ OK
  6293.    Booting using the fdt blob at 0x10becbd0
  6294.    Loading Kernel Image ... OK
  6295.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  6296.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  6297.  
  6298. Starting kernel ...
  6299.  
  6300. [    0.000000] Booting Linux on physical CPU 0x0
  6301. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  6302. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  6303. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  6304. [    0.000000] bootconsole [cdns0] enabled
  6305. [    0.000000] efi: Getting EFI parameters from FDT:
  6306. [    0.000000] efi: UEFI not found.
  6307. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  6308. [    0.000000] psci: probing for conduit method from DT.
  6309. [    0.000000] psci: PSCIv1.0 detected in firmware.
  6310. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  6311. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  6312. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  6313. [    0.000000] Detected VIPT I-cache on CPU0
  6314. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  6315. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  6316. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  6317. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  6318. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  6319. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  6320. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  6321. [    0.000000] Virtual kernel memory layout:
  6322. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  6323. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  6324. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  6325. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  6326. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  6327. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  6328. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  6329. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  6330. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  6331. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  6332. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  6333. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  6334. [    0.000000] Hierarchical RCU implementation.
  6335. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  6336. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  6337. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  6338. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  6339. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  6340. [    0.000000] GIC: Using split EOI/Deactivate mode
  6341. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  6342. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  6343. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  6344. [    0.008255] Console: colour dummy device 80x25
  6345. [    0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  6346. [    0.022886] pid_max: default: 32768 minimum: 301
  6347. [    0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  6348. [    0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  6349. [    0.041862] ASID allocator initialised with 65536 entries
  6350. [    0.047560] zynqmp_plat_init Power management API v0.3
  6351. [    0.052577] EFI services will not be available.
  6352. [    0.057342] Detected VIPT I-cache on CPU1
  6353. [    0.057376] CPU1: Booted secondary processor [410fd034]
  6354. [    0.057636] Detected VIPT I-cache on CPU2
  6355. [    0.057653] CPU2: Booted secondary processor [410fd034]
  6356. [    0.057903] Detected VIPT I-cache on CPU3
  6357. [    0.057919] CPU3: Booted secondary processor [410fd034]
  6358. [    0.057952] Brought up 4 CPUs
  6359. [    0.088237] SMP: Total of 4 processors activated.
  6360. [    0.092913] CPU features: detected feature: 32-bit EL0 Support
  6361. [    0.098709] CPU: All CPU(s) started at EL2
  6362. [    0.102782] alternatives: patching kernel code
  6363. [    0.108045] devtmpfs: initialized
  6364. [    0.115568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  6365. [    0.136562] xor: measuring software checksum speed
  6366. [    0.181235]    8regs     :  2543.000 MB/sec
  6367. [    0.221259]    8regs_prefetch:  2266.000 MB/sec
  6368. [    0.265620]    32regs    :  3125.000 MB/sec
  6369. [    0.305648]    32regs_prefetch:  2627.000 MB/sec
  6370. [    0.310069] xor: using function: 32regs (3125.000 MB/sec)
  6371. [    0.315525] pinctrl core: initialized pinctrl subsystem
  6372. [    0.321205] NET: Registered protocol family 16
  6373. [    0.326302] Failed to initialise IOMMU /amba/smmu@fd800000
  6374. [    0.331799] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  6375. [    0.339005] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  6376. [    0.374344] DMA: preallocated 65536 KiB pool for atomic allocations
  6377. [    0.390703] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  6378. [    0.398180] ARM CCI_400_r1 PMU driver probed[    0.404942] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  6379. [    0.431656] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  6380. [    0.504925] raid6: int64x1  gen()   447 MB/s
  6381. [    0.576929] raid6: int64x1  xor()   485 MB/s
  6382. [    0.648952] raid6: int64x2  gen()   741 MB/s
  6383. [    0.720963] raid6: int64x2  xor()   661 MB/s
  6384. [    0.793026] raid6: int64x4  gen()  1086 MB/s
  6385. [    0.865058] raid6: int64x4  xor()   816 MB/s
  6386. [    0.937088] raid6: int64x8  gen()  1265 MB/s
  6387. [    1.009160] raid6: int64x8  xor()   824 MB/s
  6388. [    1.081245] raid6: neonx1   gen()   798 MB/s
  6389. [    1.153214] raid6: neonx1   xor()   837 MB/s
  6390. [    1.225296] raid6: neonx2   gen()  1286 MB/s
  6391. [    1.297307] raid6: neonx2   xor()  1143 MB/s
  6392. [    1.369358] raid6: neonx4   gen()  1663 MB/s
  6393. [    1.441397] raid6: neonx4   xor()  1306 MB/s
  6394. [    1.513441] raid6: neonx8   gen()  1753 MB/s
  6395. [    1.585485] raid6: neonx8   xor()  1348 MB/s
  6396. [    1.589560] raid6: using algorithm neonx8 gen() 1753 MB/s
  6397. [    1.594922] raid6: .... xor() 1348 MB/s, rmw enabled
  6398. [    1.599852] raid6: using intx1 recovery algorithm
  6399. [    1.605009] Write failed gate address:1000f02
  6400. [    1.612977] SCSI subsystem initialized
  6401. [    1.616770] usbcore: registered new interface driver usbfs
  6402. [    1.622102] usbcore: registered new interface driver hub
  6403. [    1.627378] usbcore: registered new device driver usb
  6404. [    1.632420] media: Linux media interface: v0.10
  6405. [    1.636875] Linux video capture interface: v2.00
  6406. [    1.641460] pps_core: LinuxPPS API ver. 1 registered
  6407. [    1.646364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  6408. [    1.655457] PTP clock support registered
  6409. [    1.659357] EDAC MC: Ver: 3.0.0
  6410. [    1.662762] FPGA manager framework
  6411. [    1.666110] fpga-region fpga-full: FPGA Region probed
  6412. [    1.671109] Advanced Linux Sound Architecture Driver Initialized.
  6413. [    1.677359] Bluetooth: Core ver 2.22
  6414. [    1.680771] NET: Registered protocol family 31
  6415. [    1.685162] Bluetooth: HCI device and connection manager initialized
  6416. [    1.691479] Bluetooth: HCI socket layer initialized
  6417. [    1.696321] Bluetooth: L2CAP socket layer initialized
  6418. [    1.701346] Bluetooth: SCO socket layer initialized
  6419. [    1.706751] clocksource: Switched to clocksource arch_sys_counter
  6420. [    1.712757] VFS: Disk quotas dquot_6.6.0
  6421. [    1.716586] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  6422. [    1.726865] NET: Registered protocol family 2
  6423. [    1.731423] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  6424. [    1.738541] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  6425. [    1.745331] TCP: Hash tables configured (established 16384 bind 16384)
  6426. [    1.751733] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  6427. [    1.757665] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  6428. [    1.764172] NET: Registered protocol family 1
  6429. [    1.768673] RPC: Registered named UNIX socket transport module.
  6430. [    1.774399] RPC: Registered udp transport module.
  6431. [    1.779066] RPC: Registered tcp transport module.
  6432. [    1.783737] RPC: Registered tcp NFSv4.1 backchannel transport module.
  6433. [    1.790289] Trying to unpack rootfs image as initramfs...
  6434. [    2.113380] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  6435. [    2.120803] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  6436. [    2.129105] futex hash table entries: 1024 (order: 5, 131072 bytes)
  6437. [    2.135738] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  6438. [    2.142676] NFS: Registering the id_resolver key type
  6439. [    2.147558] Key type id_resolver registered
  6440. [    2.151690] Key type id_legacy registered
  6441. [    2.155674] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  6442. [    2.162344] ntfs: driver 2.1.32 [Flags: R/W].
  6443. [    2.166673] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  6444. [    2.181452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  6445. [    2.188662] io scheduler noop registered
  6446. [    2.192545] io scheduler deadline registered
  6447. [    2.196790] io scheduler cfq registered (default)
  6448. [    2.202041] nwl-pcie fd0e0000.pcie: Link is DOWN
  6449. [    2.206507] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  6450. [    2.212111] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  6451. [    2.217978] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  6452. [    2.224203] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  6453. [    2.230264] pci_bus 0000:00: root bus resource [bus 00-ff]
  6454. [    2.235709] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  6455. [    2.242542] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  6456. [    2.250251] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  6457. [    2.256005] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  6458. [    2.262376] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  6459. [    2.269428] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  6460. [    2.276588] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  6461. [    2.283450] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  6462. [    2.290371] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  6463. [    2.297294] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  6464. [    2.304212] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  6465. [    2.311133] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  6466. [    2.318052] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  6467. [    2.324972] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  6468. [    2.331930] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  6469. [    2.338817] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  6470. [    2.345732] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  6471. [    2.352650] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  6472. [    2.359573] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  6473. [    2.366495] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  6474. [    2.373413] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  6475. [    2.380337] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  6476. [    2.408725] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  6477. [    2.416198] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  6478. [    2.425273] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢0000) is a xuartps
  6479.     ºêconsole [ttyPS0] enabled
  6480. [    2.434217] console [ttyPS0] enabled
  6481. [    2.441185] bootconsole [cdns0] disabled
  6482. [    2.441185] bootconsole [cdns0] disabled
  6483. [    2.449246] Unable to detect cache hierarchy from DT for CPU 0
  6484. [    2.459641] brd: module loaded
  6485. [    2.465441] loop: module loaded
  6486. [    2.469417] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  6487. [    2.478302] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  6488. [    2.489034] scsi host0: ahci-ceva
  6489. [    2.492451] scsi host1: ahci-ceva
  6490. [    2.495786] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  6491. [    2.503617] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  6492. [    2.511666] mtdoops: mtd device (mtddev=name/number) must be supplied
  6493. [    2.518986] zynqmp-qspi ff0f0000.spi: rx bus width not found
  6494. [    2.524919] m25p80 spi0.0: found n25q00, expected n25q512a
  6495. [    2.530617] m25p80 spi0.0: n25q00 (131072 Kbytes)
  6496. [    2.535256] 5 ofpart partitions found on MTD device spi0.0
  6497. [    2.540704] Creating 5 MTD partitions on "spi0.0":
  6498. [    2.545481] 0x000000000000-0x000000500000 : "boot"
  6499. [    2.550736] 0x000000500000-0x000000540000 : "bootenv"
  6500. [    2.556123] 0x000000540000-0x000002740000 : "kernel"
  6501. [    2.561411] 0x000002740000-0x000003740000 : "user"
  6502. [    2.566541] 0x000003740000-0x000003750000 : "test"
  6503. [    2.572545] libphy: Fixed MDIO Bus: probed
  6504. [    2.577654] tun: Universal TUN/TAP device driver, 1.6
  6505. [    2.582625] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  6506. [    2.588903] CAN device driver interface
  6507. [    2.593226] macb ff0c0000.ethernet: Not enabling partial store and forward
  6508. [    2.600535] libphy: MACB_mii_bus: probed
  6509. [    2.679026] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  6510. [    2.688776] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  6511. [    2.701374] usbcore: registered new interface driver asix
  6512. [    2.706739] usbcore: registered new interface driver ax88179_178a
  6513. [    2.712786] usbcore: registered new interface driver cdc_ether
  6514. [    2.718600] usbcore: registered new interface driver net1080
  6515. [    2.724240] usbcore: registered new interface driver cdc_subset
  6516. [    2.730145] usbcore: registered new interface driver zaurus
  6517. [    2.735711] usbcore: registered new interface driver cdc_ncm
  6518. [    2.741667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  6519. [    2.748107] ehci-pci: EHCI PCI platform driver
  6520. [    2.752759] usbcore: registered new interface driver uas
  6521. [    2.758019] usbcore: registered new interface driver usb-storage
  6522. [    2.764275] mousedev: PS/2 mouse device common for all mice
  6523. [    2.770179] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  6524. [    2.777345] i2c /dev entries driver
  6525. [    2.780977] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  6526. [    2.787032] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  6527. [    2.793808] usbcore: registered new interface driver uvcvideo
  6528. [    2.799465] USB Video Class driver (1.1.1)
  6529. [    2.803904] Bluetooth: HCI UART driver ver 2.3
  6530. [    2.808261] Bluetooth: HCI UART protocol H4 registered
  6531. [    2.813379] Bluetooth: HCI UART protocol BCSP registered
  6532. [    2.818673] Bluetooth: HCI UART protocol LL registered
  6533. [    2.823793] Bluetooth: HCI UART protocol ATH3K registered
  6534. [    2.824957] ata1: SATA link down (SStatus 0 SControl 330)
  6535. [    2.824996] ata2: SATA link down (SStatus 0 SControl 330)
  6536. [    2.839938] Bluetooth: HCI UART protocol Three-wire (H5) registered
  6537. [    2.846224] Bluetooth: HCI UART protocol Intel registered
  6538. [    2.851604] Bluetooth: HCI UART protocol Broadcom registered
  6539. [    2.857212] Bluetooth: HCI UART protocol QCA registered
  6540. [    2.862456] usbcore: registered new interface driver bcm203x
  6541. [    2.868092] usbcore: registered new interface driver bpa10x
  6542. [    2.873648] usbcore: registered new interface driver bfusb
  6543. [    2.879116] usbcore: registered new interface driver btusb
  6544. [    2.884554] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  6545. [    2.890249] usbcore: registered new interface driver ath3k
  6546. [    2.895785] EDAC MC: ECC not enabled
  6547. [    2.899411] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  6548. [    2.908438] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  6549. [    2.920731] sdhci: Secure Digital Host Controller Interface driver
  6550. [    2.926825] sdhci: Copyright(c) Pierre Ossman
  6551. [    2.931164] sdhci-pltfm: SDHCI platform and OF driver helper
  6552. [    2.982762] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  6553. [    2.990872] ledtrig-cpu: registered to indicate activity on CPUs
  6554. [    2.996931] usbcore: registered new interface driver usbhid
  6555. [    3.002422] usbhid: USB HID core driver
  6556. [    3.007817] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  6557. [    3.014683] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  6558. [    3.021859] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  6559. [    3.029204] PLL: shutdown
  6560. [    3.032635] Write failed to divider address:fd1a007c
  6561. [    3.037672] PLL: enable
  6562. [    3.040199] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  6563. [    3.048227] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  6564. [    3.057903] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  6565. [    3.067755] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  6566. [    3.075180] pktgen: Packet Generator for packet performance testing. Version: 2.75
  6567. [    3.084838] Netfilter messages via NETLINK v0.30.
  6568. [    3.089583] ip_tables: (C) 2000-2006 Netfilter Core Team
  6569. [    3.094864] Initializing XFRM netlink socket
  6570. [    3.099285] NET: Registered protocol family 10
  6571. [    3.104285] ip6_tables: (C) 2000-2006 Netfilter Core Team
  6572. [    3.109639] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  6573. [    3.115857] NET: Registered protocol family 17
  6574. [    3.120229] NET: Registered protocol family 15
  6575. [    3.124657] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  6576. [    3.137578] Ebtables v2.0 registered
  6577. [    3.141187] can: controller area network core (rev 20120528 abi 9)
  6578. [    3.147334] NET: Registered protocol family 29
  6579. [    3.151727] can: raw protocol (rev 20120528)
  6580. [    3.155979] can: broadcast manager protocol (rev 20161123 t)
  6581. [    3.161627] can: netlink gateway (rev 20130117) max_hops=1
  6582. [    3.169155] Bluetooth: RFCOMM TTY layer initialized
  6583. [    3.175965] Bluetooth: RFCOMM socket layer initialized
  6584. [    3.181021] Bluetooth: RFCOMM ver 1.11
  6585. [    3.184756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  6586. [    3.190038] Bluetooth: BNEP filters: protocol multicast
  6587. [    3.195248] Bluetooth: BNEP socket layer initialized
  6588. [    3.200193] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  6589. [    3.206098] Bluetooth: HIDP socket layer initialized
  6590. [    3.211219] 9pnet: Installing 9P2000 support
  6591. [    3.215418] Key type dns_resolver registered
  6592. [    3.220115] registered taskstats version 1
  6593. [    3.225648] Btrfs loaded, crc32c=crc32c-generic
  6594. [    3.238836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  6595. [    3.244273] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  6596. [    3.252136] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  6597. [    3.260788] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  6598. [    3.266864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  6599. [    3.273572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  6600. [    3.280774] usb usb1: Product: xHCI Host Controller
  6601. [    3.285633] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  6602. [    3.290931] usb usb1: SerialNumber: xhci-hcd.0.auto
  6603. [    3.296099] hub 1-0:1.0: USB hub found
  6604. [    3.299785] hub 1-0:1.0: 1 port detected
  6605. [    3.303791] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  6606. [    3.309196] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  6607. [    3.316869] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  6608. [    3.324965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  6609. [    3.331673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  6610. [    3.338876] usb usb2: Product: xHCI Host Controller
  6611. [    3.343736] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  6612. [    3.349033] usb usb2: SerialNumber: xhci-hcd.0.auto
  6613. [    3.354099] hub 2-0:1.0: USB hub found
  6614. [    3.357782] hub 2-0:1.0: 1 port detected
  6615. [    3.362048] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  6616. [    3.370253] clk: Not disabling unused clocks
  6617. [    3.374441] ALSA device list:
  6618. [    3.377389]   #0: DisplayPort monitor
  6619. [    3.381660] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  6620. INIT: version 2.88 booting
  6621. Starting udev
  6622. [    3.500680] udevd[1611]: starting version 3.2
  6623. [    3.505316] random: udevd: uninitialized urandom read (16 bytes read)
  6624. [    3.511752] random: udevd: uninitialized urandom read (16 bytes read)
  6625. [    3.518233] random: udevd: uninitialized urandom read (16 bytes read)
  6626. [    3.524623] random: udevd: uninitialized urandom read (16 bytes read)
  6627. [    3.534644] udevd[1612]: starting eudev-3.2
  6628. [    3.577847] random: udevd: uninitialized urandom read (16 bytes read)
  6629. [    3.587864] random: udevd: uninitialized urandom read (16 bytes read)
  6630. [    3.614837] dsaxidma: loading out-of-tree module taints kernel.
  6631. [    3.618158] dsaxidma: loading out-of-tree module taints kernel.
  6632. [    3.618862] <dma1> init: registered
  6633. [    3.637708] <dma2> init: registered
  6634. Populating dev cache
  6635. [    4.133530] random: dd: uninitialized urandom read (512 bytes read)
  6636. Thu Jul 26 08:51:43 UTC 2018
  6637. Starting internet superserver: inetd.
  6638. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  6639. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  6640. INIT: Entering runlevel: 5
  6641. Hello World
  6642. [22]:0x12
  6643. [20]:0x201
  6644. [20]:0x201
  6645. [22]:0x1
  6646. [0]:0x140
  6647. [0]:0x140
  6648. Configuring network interfaces... [    4.432159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  6649. done.
  6650. Starting Dropbear SSH server: [    4.461324] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6651. [    4.471424] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6652. Generating key, this may take a while...
  6653. [    5.458867] macb ff0c0000.ethernet eth0: link up (1000/Full)
  6654. [    5.464466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  6655. [    6.964355] random: dropbearkey: uninitialized urandom read (32 bytes read)
  6656. Public key portion is:
  6657. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDHkk1xDkqYpIud6G1J3ilP69K7kGcJIh8V2ugutQlSH6rDc/RsBLXO3lJlG7e1WDRi+FMo5cEtneflxd0stWsyu5fKsioGyIb4zuqvmruRI1R4TFGI4V+jHYzl0B/TQk8f9/5hZ8+PTVC3sIPhvEPKTKBZYI1IwUD7Vlye+XOVEGvocMfEtgdLj1WIz9+DEZDAqilUA//pD/5fqAw4pJy1Un5UfrnRFyUUsgRnYqcpl7knLUFal4sCuxFsxkVHIgd07SWakUZFw5QxbKeYY86hWL+xd7P7g2uzqW/ciwallEshNPUw4+7WPtyVcgRHnNKO3FfGcruKWRqYFFu+e5Qr root@VP88x_2017_3_PRJ0191
  6658. Fingerprint: md5 ce:2e:e8:dc:f7:c5:c8:d3:e5:7b:d0:fd:e2:c6:55:35
  6659. dropbear.
  6660. Starting syslogd/klogd: done
  6661. [    7.017629] random: fast init done
  6662. [    7.445578] random: crng init done
  6663. [    9.131506] jffs2: notice: (2072) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  6664. hello world.....
  6665. Starting tcf-agent: OK
  6666.  
  6667. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  6668. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  6669.  
  6670. unitapi_auto_config returned -50
  6671.  
  6672. Invalid device handle '1'
  6673. Press a key to exit the application
  6674.  
  6675. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/
  6676. devices/            drivers_probe       slots/
  6677. drivers/            rescan              uevent
  6678. drivers_autoprobe   resource_alignment
  6679. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/
  6680. broken_parity_status      enable                    rescan
  6681. class                     irq                       resource
  6682. config                    local_cpulist             subsystem/
  6683. consistent_dma_mask_bits  local_cpus                subsystem_device
  6684. device                    modalias                  subsystem_vendor
  6685. devspec                   msi_bus                   uevent
  6686. dma_mask_bits             pci_bus/                  vendor
  6687. driver_override           remove
  6688. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6689. 0000:00:00.0/
  6690. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6691. 0000:00:00.0/
  6692. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/re
  6693. remove    rescan    resource
  6694. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/re
  6695. remove    rescan    resource
  6696. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
  6697. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/d
  6698. devices/           drivers/           drivers_autoprobe  drivers_probe
  6699. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/d
  6700. devices/           drivers/           drivers_autoprobe  drivers_probe
  6701. root@VP88x_2017_3_PRJ0191:~# find /sys/bus/pci/ | grep resc
  6702. /sys/bus/pci/rescan
  6703. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  6704. [  114.515306] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  6705. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6706. 0000:00:00.0/
  6707. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6708. 0000:00:00.0/
  6709. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6710. 0000:00:00.0/
  6711. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6712. 0000:00:00.0/
  6713. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6714. 0000:00:00.0/
  6715. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
  6716. 0000:00:00.0/
  6717. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0^C
  6718. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  6719. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  6720.  
  6721. unitapi_auto_config returned -50
  6722.  
  6723. Invalid device handle '1'
  6724. Press a key to exit the application
  6725. ^C
  6726. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
  6727. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  6728. [  151.411310] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  6729. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6730. 0000:00:00.0/
  6731. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6732. 0000:00:00.0/
  6733. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6734. 0000:00:00.0/
  6735. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6736. 0000:00:00.0/
  6737. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6738. 0000:00:00.0/
  6739. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
  6740. 0000:00:00.0/
  6741. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/
  6742. broken_parity_status      enable                    rescan
  6743. class                     irq                       resource
  6744. config                    local_cpulist             subsystem/
  6745. consistent_dma_mask_bits  local_cpus                subsystem_device
  6746. device                    modalias                  subsystem_vendor
  6747. devspec                   msi_bus                   uevent
  6748. dma_mask_bits             pci_bus/                  vendor
  6749. driver_override           remove
  6750. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
  6751. cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
  6752. root@VP88x_2017_3_PRJ0191:~# rm /sys/bus/pci/devices/0000\:00\:00.0/config
  6753. rm: can't remove '/sys/bus/pci/devices/0000:00:00.0/config': Operation not permitted
  6754. root@VP88x_2017_3_PRJ0191:~# chmod 777 /sys/bus/pci/devices/0000\:00\:00.0/confi
  6755. g
  6756. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
  6757. cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
  6758. root@VP88x_2017_3_PRJ0191:~# rm /sys/bus/pci/devices/0000\:00\:00.0/config
  6759. rm: can't remove '/sys/bus/pci/devices/0000:00:00.0/config': Operation not permitted
  6760. root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0/config
  6761. -rwxrwxrwx    1 root     root          4096 Jul 26 08:55 /sys/bus/pci/devices/0000:00:00.0/config
  6762. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  6763. [  249.763023] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  6764. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  6765. [  251.866870] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  6766. root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0
  6767. 0000:00:00.0/
  6768. root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0
  6769. 0000:00:00.0/
  6770. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  6771. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  6772.  
  6773. unitapi_auto_config returned -50
  6774.  
  6775. Invalid device handle '1'
  6776. Press a key to exit the application
  6777. ^C
  6778. root@VP88x_2017_3_PRJ0191:~# Xilinx Zynq MP First Stage Boot Loader
  6779. Release 2017.3   May 24 2018  -  10:35:53
  6780. Marvell PHY reset
  6781. SI5338 0x70 not configured
  6782. SI5338 0x70 configuration finished
  6783. SI5338 0x71 not configured
  6784. SI5338 0x71 configuration finished
  6785.  
  6786.  
  6787. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  6788.  
  6789. I2C:   ready
  6790. DRAM:  2 GiB
  6791. EL Level:       EL2
  6792. Chip ID:        xczu3eg
  6793. MMC:   Card did not respond to voltage select!
  6794. sdhci@ff160000 - probe failed: -95
  6795. Card did not respond to voltage select!
  6796.  
  6797. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  6798. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  6799. *** Warning - bad CRC, using default environment
  6800.  
  6801. In:    serial
  6802. Out:   serial
  6803. Err:   serial
  6804. Bootmode: QSPI_MODE
  6805. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  6806. eth0: ethernet@ff0c0000
  6807. U-BOOT for VP88x_2017_3_PRJ0191
  6808.  
  6809. Hit any key to stop autoboot:  0
  6810. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  6811. device 0 offset 0x540000, size 0x2200000
  6812. SF: 35651584 bytes @ 0x540000 Read: OK
  6813. ## Loading kernel from FIT Image at 10000000 ...
  6814.    Using 'conf@1' configuration
  6815.    Trying 'kernel@0' kernel subimage
  6816.      Description:  Linux Kernel
  6817.      Type:         Kernel Image
  6818.      Compression:  uncompressed
  6819.      Data Start:   0x100000d8
  6820.      Data Size:    12503552 Bytes = 11.9 MiB
  6821.      Architecture: AArch64
  6822.      OS:           Linux
  6823.      Load Address: 0x00080000
  6824.      Entry Point:  0x00080000
  6825.      Hash algo:    sha1
  6826.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  6827.    Verifying Hash Integrity ... sha1+ OK
  6828. ## Loading ramdisk from FIT Image at 10000000 ...
  6829.    Using 'conf@1' configuration
  6830.    Trying 'ramdisk@0' ramdisk subimage
  6831.      Description:  ramdisk
  6832.      Type:         RAMDisk Image
  6833.      Compression:  uncompressed
  6834.      Data Start:   0x10bf54e4
  6835.      Data Size:    8973721 Bytes = 8.6 MiB
  6836.      Architecture: AArch64
  6837.      OS:           Linux
  6838.      Load Address: unavailable
  6839.      Entry Point:  unavailable
  6840.      Hash algo:    sha1
  6841.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  6842.    Verifying Hash Integrity ... sha1+ OK
  6843. ## Loading fdt from FIT Image at 10000000 ...
  6844.    Using 'conf@1' configuration
  6845.    Trying 'fdt@0' fdt subimage
  6846.      Description:  Flattened Device Tree blob
  6847.      Type:         Flat Device Tree
  6848.      Compression:  uncompressed
  6849.      Data Start:   0x10becbd0
  6850.      Data Size:    34910 Bytes = 34.1 KiB
  6851.      Architecture: AArch64
  6852.      Hash algo:    sha1
  6853.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  6854.    Verifying Hash Integrity ... sha1+ OK
  6855.    Booting using the fdt blob at 0x10becbd0
  6856.    Loading Kernel Image ... OK
  6857.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  6858.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  6859.  
  6860. Starting kernel ...
  6861.  
  6862. [    0.000000] Booting Linux on physical CPU 0x0
  6863. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  6864. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  6865. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  6866. [    0.000000] bootconsole [cdns0] enabled
  6867. [    0.000000] efi: Getting EFI parameters from FDT:
  6868. [    0.000000] efi: UEFI not found.
  6869. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  6870. [    0.000000] psci: probing for conduit method from DT.
  6871. [    0.000000] psci: PSCIv1.0 detected in firmware.
  6872. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  6873. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  6874. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  6875. [    0.000000] Detected VIPT I-cache on CPU0
  6876. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  6877. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  6878. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  6879. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  6880. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  6881. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  6882. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  6883. [    0.000000] Virtual kernel memory layout:
  6884. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  6885. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  6886. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  6887. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  6888. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  6889. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  6890. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  6891. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  6892. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  6893. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  6894. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  6895. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  6896. [    0.000000] Hierarchical RCU implementation.
  6897. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  6898. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  6899. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  6900. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  6901. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  6902. [    0.000000] GIC: Using split EOI/Deactivate mode
  6903. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  6904. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  6905. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  6906. [    0.008251] Console: colour dummy device 80x25
  6907. [    0.012521] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  6908. [    0.022878] pid_max: default: 32768 minimum: 301
  6909. [    0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  6910. [    0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  6911. [    0.041858] ASID allocator initialised with 65536 entries
  6912. [    0.047557] zynqmp_plat_init Power management API v0.3
  6913. [    0.052568] EFI services will not be available.
  6914. [    0.057335] Detected VIPT I-cache on CPU1
  6915. [    0.057369] CPU1: Booted secondary processor [410fd034]
  6916. [    0.057630] Detected VIPT I-cache on CPU2
  6917. [    0.057647] CPU2: Booted secondary processor [410fd034]
  6918. [    0.057895] Detected VIPT I-cache on CPU3
  6919. [    0.057912] CPU3: Booted secondary processor [410fd034]
  6920. [    0.057944] Brought up 4 CPUs
  6921. [    0.088228] SMP: Total of 4 processors activated.
  6922. [    0.092904] CPU features: detected feature: 32-bit EL0 Support
  6923. [    0.098701] CPU: All CPU(s) started at EL2
  6924. [    0.102773] alternatives: patching kernel code
  6925. [    0.108036] devtmpfs: initialized
  6926. [    0.115568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  6927. [    0.136593] xor: measuring software checksum speed
  6928. [    0.181264]    8regs     :  2543.000 MB/sec
  6929. [    0.221287]    8regs_prefetch:  2266.000 MB/sec
  6930. [    0.265656]    32regs    :  3125.000 MB/sec
  6931. [    0.305683]    32regs_prefetch:  2627.000 MB/sec
  6932. [    0.310104] xor: using function: 32regs (3125.000 MB/sec)
  6933. [    0.315561] pinctrl core: initialized pinctrl subsystem
  6934. [    0.321239] NET: Registered protocol family 16
  6935. [    0.326399] Failed to initialise IOMMU /amba/smmu@fd800000
  6936. [    0.331895] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  6937. [    0.339100] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  6938. [    0.374389] DMA: preallocated 65536 KiB pool for atomic allocations
  6939. [    0.390808] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  6940. [    0.398289] ARM CCI_400_r1 PMU driver probed[    0.405065] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  6941. [    0.431770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  6942. [    0.504946] raid6: int64x1  gen()   447 MB/s
  6943. [    0.576910] raid6: int64x1  xor()   485 MB/s
  6944. [    0.648950] raid6: int64x2  gen()   740 MB/s
  6945. [    0.721005] raid6: int64x2  xor()   661 MB/s
  6946. [    0.793067] raid6: int64x4  gen()  1086 MB/s
  6947. [    0.865094] raid6: int64x4  xor()   816 MB/s
  6948. [    0.937146] raid6: int64x8  gen()  1266 MB/s
  6949. [    1.009198] raid6: int64x8  xor()   824 MB/s
  6950. [    1.081231] raid6: neonx1   gen()   797 MB/s
  6951. [    1.153252] raid6: neonx1   xor()   837 MB/s
  6952. [    1.225316] raid6: neonx2   gen()  1286 MB/s
  6953. [    1.297348] raid6: neonx2   xor()  1129 MB/s
  6954. [    1.369395] raid6: neonx4   gen()  1663 MB/s
  6955. [    1.441420] raid6: neonx4   xor()  1306 MB/s
  6956. [    1.513466] raid6: neonx8   gen()  1752 MB/s
  6957. [    1.585524] raid6: neonx8   xor()  1349 MB/s
  6958. [    1.589603] raid6: using algorithm neonx8 gen() 1752 MB/s
  6959. [    1.594965] raid6: .... xor() 1349 MB/s, rmw enabled
  6960. [    1.599896] raid6: using intx1 recovery algorithm
  6961. [    1.605061] Write failed gate address:1000f02
  6962. [    1.612960] SCSI subsystem initialized
  6963. [    1.616761] usbcore: registered new interface driver usbfs
  6964. [    1.622095] usbcore: registered new interface driver hub
  6965. [    1.627369] usbcore: registered new device driver usb
  6966. [    1.632415] media: Linux media interface: v0.10
  6967. [    1.636867] Linux video capture interface: v2.00
  6968. [    1.641451] pps_core: LinuxPPS API ver. 1 registered
  6969. [    1.646356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  6970. [    1.655448] PTP clock support registered
  6971. [    1.659350] EDAC MC: Ver: 3.0.0
  6972. [    1.662726] FPGA manager framework
  6973. [    1.666070] fpga-region fpga-full: FPGA Region probed
  6974. [    1.671084] Advanced Linux Sound Architecture Driver Initialized.
  6975. [    1.677326] Bluetooth: Core ver 2.22
  6976. [    1.680736] NET: Registered protocol family 31
  6977. [    1.685127] Bluetooth: HCI device and connection manager initialized
  6978. [    1.691444] Bluetooth: HCI socket layer initialized
  6979. [    1.696287] Bluetooth: L2CAP socket layer initialized
  6980. [    1.701312] Bluetooth: SCO socket layer initialized
  6981. [    1.706735] clocksource: Switched to clocksource arch_sys_counter
  6982. [    1.712735] VFS: Disk quotas dquot_6.6.0
  6983. [    1.716578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  6984. [    1.726817] NET: Registered protocol family 2
  6985. [    1.731356] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  6986. [    1.738475] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  6987. [    1.745255] TCP: Hash tables configured (established 16384 bind 16384)
  6988. [    1.751650] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  6989. [    1.757586] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  6990. [    1.764098] NET: Registered protocol family 1
  6991. [    1.768551] RPC: Registered named UNIX socket transport module.
  6992. [    1.774287] RPC: Registered udp transport module.
  6993. [    1.778944] RPC: Registered tcp transport module.
  6994. [    1.783614] RPC: Registered tcp NFSv4.1 backchannel transport module.
  6995. [    1.790173] Trying to unpack rootfs image as initramfs...
  6996. [    2.113669] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  6997. [    2.121089] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  6998. [    2.129397] futex hash table entries: 1024 (order: 5, 131072 bytes)
  6999. [    2.136049] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  7000. [    2.142984] NFS: Registering the id_resolver key type
  7001. [    2.147860] Key type id_resolver registered
  7002. [    2.152002] Key type id_legacy registered
  7003. [    2.155979] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  7004. [    2.162649] ntfs: driver 2.1.32 [Flags: R/W].
  7005. [    2.166977] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  7006. [    2.181813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  7007. [    2.189029] io scheduler noop registered
  7008. [    2.192933] io scheduler deadline registered
  7009. [    2.197155] io scheduler cfq registered (default)
  7010. [    2.202417] nwl-pcie fd0e0000.pcie: Link is UP
  7011. [    2.206709] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  7012. [    2.212311] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  7013. [    2.218178] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  7014. [    2.224402] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  7015. [    2.230465] pci_bus 0000:00: root bus resource [bus 00-ff]
  7016. [    2.235910] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  7017. [    2.242747] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  7018. [    2.250672] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  7019. [    2.257270] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  7020. [    2.264018] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  7021. [    2.269205] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  7022. [    2.276677] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  7023. [    2.283047] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  7024. [    2.290096] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  7025. [    2.297252] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  7026. [    2.304117] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  7027. [    2.311033] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  7028. [    2.317960] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  7029. [    2.324880] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  7030. [    2.331797] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  7031. [    2.338719] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  7032. [    2.345638] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  7033. [    2.352598] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  7034. [    2.359485] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  7035. [    2.366397] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  7036. [    2.373318] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  7037. [    2.380239] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  7038. [    2.387159] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  7039. [    2.394081] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  7040. [    2.401001] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  7041. [    2.429368] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  7042. [    2.436852] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  7043. [    2.445869] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢?Êêconsole [ttyPS0] enabled
  7044. [    2.454819] console [ttyPS0] enabled
  7045. [    2.461777] bootconsole [cdns0] disabled
  7046. [    2.461777] bootconsole [cdns0] disabled
  7047. [    2.469812] Unable to detect cache hierarchy from DT for CPU 0
  7048. [    2.480248] brd: module loaded
  7049. [    2.486106] loop: module loaded
  7050. [    2.490073] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  7051. [    2.498952] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  7052. [    2.509681] scsi host0: ahci-ceva
  7053. [    2.513099] scsi host1: ahci-ceva
  7054. [    2.516443] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  7055. [    2.524274] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  7056. [    2.532345] mtdoops: mtd device (mtddev=name/number) must be supplied
  7057. [    2.539692] zynqmp-qspi ff0f0000.spi: rx bus width not found
  7058. [    2.545618] m25p80 spi0.0: found n25q00, expected n25q512a
  7059. [    2.551343] m25p80 spi0.0: n25q00 (131072 Kbytes)
  7060. [    2.555984] 5 ofpart partitions found on MTD device spi0.0
  7061. [    2.561432] Creating 5 MTD partitions on "spi0.0":
  7062. [    2.566208] 0x000000000000-0x000000500000 : "boot"
  7063. [    2.571461] 0x000000500000-0x000000540000 : "bootenv"
  7064. [    2.576839] 0x000000540000-0x000002740000 : "kernel"
  7065. [    2.582123] 0x000002740000-0x000003740000 : "user"
  7066. [    2.587240] 0x000003740000-0x000003750000 : "test"
  7067. [    2.593194] libphy: Fixed MDIO Bus: probed
  7068. [    2.598284] tun: Universal TUN/TAP device driver, 1.6
  7069. [    2.603255] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  7070. [    2.609529] CAN device driver interface
  7071. [    2.613850] macb ff0c0000.ethernet: Not enabling partial store and forward
  7072. [    2.621157] libphy: MACB_mii_bus: probed
  7073. [    2.699008] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  7074. [    2.708755] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  7075. [    2.721342] usbcore: registered new interface driver asix
  7076. [    2.726711] usbcore: registered new interface driver ax88179_178a
  7077. [    2.732757] usbcore: registered new interface driver cdc_ether
  7078. [    2.738571] usbcore: registered new interface driver net1080
  7079. [    2.744213] usbcore: registered new interface driver cdc_subset
  7080. [    2.750114] usbcore: registered new interface driver zaurus
  7081. [    2.755684] usbcore: registered new interface driver cdc_ncm
  7082. [    2.761638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  7083. [    2.768078] ehci-pci: EHCI PCI platform driver
  7084. [    2.772735] usbcore: registered new interface driver uas
  7085. [    2.778000] usbcore: registered new interface driver usb-storage
  7086. [    2.784250] mousedev: PS/2 mouse device common for all mice
  7087. [    2.790138] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  7088. [    2.797309] i2c /dev entries driver
  7089. [    2.800938] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  7090. [    2.806985] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  7091. [    2.813740] usbcore: registered new interface driver uvcvideo
  7092. [    2.819405] USB Video Class driver (1.1.1)
  7093. [    2.823849] Bluetooth: HCI UART driver ver 2.3
  7094. [    2.828209] Bluetooth: HCI UART protocol H4 registered
  7095. [    2.833325] Bluetooth: HCI UART protocol BCSP registered
  7096. [    2.838619] Bluetooth: HCI UART protocol LL registered
  7097. [    2.843739] Bluetooth: HCI UART protocol ATH3K registered
  7098. [    2.849121] Bluetooth: HCI UART protocol Three-wire (H5) registered
  7099. [    2.852943] ata2: SATA link down (SStatus 0 SControl 330)
  7100. [    2.852984] ata1: SATA link down (SStatus 0 SControl 330)
  7101. [    2.866170] Bluetooth: HCI UART protocol Intel registered
  7102. [    2.871551] Bluetooth: HCI UART protocol Broadcom registered
  7103. [    2.877158] Bluetooth: HCI UART protocol QCA registered
  7104. [    2.882399] usbcore: registered new interface driver bcm203x
  7105. [    2.888042] usbcore: registered new interface driver bpa10x
  7106. [    2.893595] usbcore: registered new interface driver bfusb
  7107. [    2.899063] usbcore: registered new interface driver btusb
  7108. [    2.904501] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  7109. [    2.910195] usbcore: registered new interface driver ath3k
  7110. [    2.915729] EDAC MC: ECC not enabled
  7111. [    2.919359] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  7112. [    2.928393] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  7113. [    2.940684] sdhci: Secure Digital Host Controller Interface driver
  7114. [    2.946781] sdhci: Copyright(c) Pierre Ossman
  7115. [    2.951119] sdhci-pltfm: SDHCI platform and OF driver helper
  7116. [    3.002745] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  7117. [    3.010871] ledtrig-cpu: registered to indicate activity on CPUs
  7118. [    3.016925] usbcore: registered new interface driver usbhid
  7119. [    3.022409] usbhid: USB HID core driver
  7120. [    3.027804] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  7121. [    3.034694] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  7122. [    3.041857] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  7123. [    3.049208] PLL: shutdown
  7124. [    3.052641] Write failed to divider address:fd1a007c
  7125. [    3.057678] PLL: enable
  7126. [    3.060201] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  7127. [    3.068248] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  7128. [    3.077921] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  7129. [    3.087760] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  7130. [    3.095177] pktgen: Packet Generator for packet performance testing. Version: 2.75
  7131. [    3.102849] Netfilter messages via NETLINK v0.30.
  7132. [    3.107601] ip_tables: (C) 2000-2006 Netfilter Core Team
  7133. [    3.112879] Initializing XFRM netlink socket
  7134. [    3.117192] NET: Registered protocol family 10
  7135. [    3.122034] ip6_tables: (C) 2000-2006 Netfilter Core Team
  7136. [    3.127387] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  7137. [    3.133600] NET: Registered protocol family 17
  7138. [    3.137970] NET: Registered protocol family 15
  7139. [    3.142395] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  7140. [    3.155322] Ebtables v2.0 registered
  7141. [    3.158933] can: controller area network core (rev 20120528 abi 9)
  7142. [    3.165078] NET: Registered protocol family 29
  7143. [    3.169468] can: raw protocol (rev 20120528)
  7144. [    3.173719] can: broadcast manager protocol (rev 20161123 t)
  7145. [    3.179363] can: netlink gateway (rev 20130117) max_hops=1
  7146. [    3.184882] Bluetooth: RFCOMM TTY layer initialized
  7147. [    3.189698] Bluetooth: RFCOMM socket layer initialized
  7148. [    3.194822] Bluetooth: RFCOMM ver 1.11
  7149. [    3.198542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  7150. [    3.203841] Bluetooth: BNEP filters: protocol multicast
  7151. [    3.209054] Bluetooth: BNEP socket layer initialized
  7152. [    3.213995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  7153. [    3.219899] Bluetooth: HIDP socket layer initialized
  7154. [    3.225027] 9pnet: Installing 9P2000 support
  7155. [    3.229229] Key type dns_resolver registered
  7156. [    3.235884] registered taskstats version 1
  7157. [    3.243131] Btrfs loaded, crc32c=crc32c-generic
  7158. [    3.264841] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  7159. [    3.270269] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  7160. [    3.280163] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  7161. [    3.290828] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  7162. [    3.298881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  7163. [    3.307602] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  7164. [    3.314738] usb usb1: Product: xHCI Host Controller
  7165. [    3.319596] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  7166. [    3.324890] usb usb1: SerialNumber: xhci-hcd.0.auto
  7167. [    3.331997] hub 1-0:1.0: USB hub found
  7168. [    3.335692] hub 1-0:1.0: 1 port detected
  7169. [    3.339689] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  7170. [    3.345095] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  7171. [    3.352767] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  7172. [    3.360866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  7173. [    3.367572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  7174. [    3.374774] usb usb2: Product: xHCI Host Controller
  7175. [    3.381643] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  7176. [    3.388872] usb usb2: SerialNumber: xhci-hcd.0.auto
  7177. [    3.393893] hub 2-0:1.0: USB hub found
  7178. [    3.397575] hub 2-0:1.0: 1 port detected
  7179. [    3.403854] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  7180. [    3.414063] clk: Not disabling unused clocks
  7181. [    3.418253] ALSA device list:
  7182. [    3.421195]   #0: DisplayPort monitor
  7183. [    3.425464] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  7184. INIT: version 2.88 booting
  7185. Starting udev
  7186. [    3.540375] udevd[1613]: starting version 3.2
  7187. [    3.545030] random: udevd: uninitialized urandom read (16 bytes read)
  7188. [    3.551462] random: udevd: uninitialized urandom read (16 bytes read)
  7189. [    3.557873] random: udevd: uninitialized urandom read (16 bytes read)
  7190. [    3.564268] random: udevd: uninitialized urandom read (16 bytes read)
  7191. [    3.574388] udevd[1614]: starting eudev-3.2
  7192. [    3.617511] random: udevd: uninitialized urandom read (16 bytes read)
  7193. [    3.627629] random: udevd: uninitialized urandom read (16 bytes read)
  7194. [    3.637012] 4fm: loading out-of-tree module taints kernel.
  7195. [    3.644182] pci 0000:00:00.0: enabling device (0000 -> 0002)
  7196. [    3.649862] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  7197. [    3.655465] Accessing 47232 of total 1 entries in dev->bar
  7198. [    3.660983] dev->bar[u].virt_address:cf3d07c value:38011121
  7199. [    3.664019] <dma1> init: registered
  7200. [    3.669967] dev->bar[u].virt_address:cf3d080 value:deadbeef
  7201. [    3.675528] dev->bar[u].virt_address:cf3d084 value:baadf00d
  7202. [    3.681111] dev->bar[u].virt_address:cf3d088 value:eba00eba
  7203. [    3.686635] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  7204. [    3.699038] <dma2> init: registered
  7205. [    3.712511] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  7206. Populating dev cache
  7207. [    4.157145] random: dd: uninitialized urandom read (512 bytes read)
  7208. Thu Jul 26 08:51:43 UTC 2018
  7209. Starting internet superserver: inetd.
  7210. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  7211. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  7212. INIT: Entering runlevel: 5
  7213. Hello World
  7214. [22]:0x12
  7215. [20]:0x201
  7216. [20]:0x201
  7217. [22]:0x1
  7218. [0]:0x140
  7219. [0]:0x140
  7220. Configuring network interfaces... [    4.457216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  7221. done.
  7222. Starting Dropbear SSH server: [    4.485943] random: dropbearkey: uninitialized urandom read (32 bytes read)
  7223. [    4.496048] random: dropbearkey: uninitialized urandom read (32 bytes read)
  7224. Generating key, this may take a while...
  7225. [    5.490854] macb ff0c0000.ethernet eth0: link up (1000/Full)
  7226. [    5.496454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  7227. [    6.903891] random: dropbearkey: uninitialized urandom read (32 bytes read)
  7228. Public key portion is:
  7229. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCj9GFFEvbsnCcDkfTK8TF4/nE1KSQX4t6r+IF3nN/qu+k4HvGGUnXB95eSIFEBw3XchsOgF3aEJS/mG3OElsQfHfvVkWElr+EhGxoZPEZxtylzWBYsx3VubLj0iNVP6j5W3M/2wiWp0NSLi2oBUZhxHkoqICXpYRMccrCJSC9RL4xf0ZJPL5J/bmjFfaeJmUEitn5SlgJpmGY1TSdHeOpNgahK+KGhFk5vrXH4l58SudoyF9vCuRhbWR7P8RNv25rMlgbNa8K0pyHkDTmO/aLyoV2H2fuOrrLkEPUWXTKmYVjrzsgsIXeAU++NKbXnjJoMhj27H0S84Rc/vm13CJ6v root@VP88x_2017_3_PRJ0191
  7230. Fingerprint: md5 1b:a3:e8:96:a6:df:66:1d:4f:c4:06:c8:77:7a:e3:70
  7231. dropbear.
  7232. Starting syslogd/klogd: done
  7233. [    6.957581] random: fast init done
  7234. [    7.413732] random: crng init done
  7235. [    9.213970] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  7236. hello world.....
  7237. Starting tcf-agent: OK
  7238.  
  7239. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  7240. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  7241.  
  7242. Global Units:
  7243. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  7244. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  7245. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  7246. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  7247. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  7248. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  7249.  
  7250.  
  7251. Running 'VP880-FMC134' on PCIe, CID725
  7252.  
  7253. -----------------------------------------------------------
  7254. Device 'VP880' (P0)
  7255. -----------------------------------------------------------
  7256. Constellation ID   : 759
  7257. Number Of Stars    : 19
  7258. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  7259. Firmware Build Code: 0
  7260. Firmware Revision  : 1.2
  7261. -----------------------------------------------------------
  7262.  
  7263.     - Unit 0 is VP88x host interface star
  7264.  
  7265. -------- Onboard Monitoring (ADC Monitor) ---------
  7266. Temp (       AD7291  ) : OK    (52.50C)
  7267. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  7268. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  7269. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  7270. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  7271. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  7272. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  7273.  
  7274. Vin6 ( ADC0     raw  ) : OK    (0.685V)
  7275. Vin6 ( ADC0    Temp  ) : OK    (65.74C)
  7276.  
  7277. Vin7 ( ADC1     raw  ) : OK    (0.685V)
  7278. Vin7 ( ADC1    Temp  ) : OK    (65.36C)
  7279. ---------------------------------------------------
  7280.  
  7281.  
  7282. -------- Onboard Monitoring (Voltage Monitor) ---------
  7283. Temp (   AD7291  ) : OK    (52.00C)
  7284. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  7285. Vin1 (  3.3Vclk  ) : OK    ( 3.25V)
  7286. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  7287. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  7288. Vin4 (     Vadj  ) : OK    ( 1.81V)
  7289. Vin5 (  3.3Vfmc  ) : OK    ( 3.25V)
  7290. Vin6 ( 12.0Vfmc  ) : OK    (11.95V)
  7291. Vin7 (     Viob  ) : OK    ( 1.81V)
  7292. -------------------------------------------------------
  7293.  
  7294. Configuring clock tree ...
  7295.  
  7296.  
  7297.  Setting Clock_Mode
  7298. Internal Reference Mode
  7299. ^C
  7300. root@VP88x_2017_3_PRJ0191:~# lspci -vvv
  7301. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  7302.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  7303.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  7304.         Latency: 0
  7305.         Interrupt: pin A routed to IRQ 255
  7306.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  7307.         I/O behind bridge: 00000000-00000fff
  7308.         Memory behind bridge: e0000000-e00fffff
  7309.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  7310.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  7311.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  7312.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  7313.         Capabilities: [40] Power Management version 3
  7314.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  7315.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  7316.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  7317.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  7318.                         ExtTag- RBE+
  7319.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  7320.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  7321.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  7322.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  7323.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  7324.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  7325.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  7326.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  7327.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt+
  7328.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  7329.                 RootCap: CRSVisible+
  7330.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  7331.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  7332.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  7333.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  7334.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  7335.                          Compliance De-emphasis: -6dB
  7336.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  7337.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  7338.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  7339.         Capabilities: [10c v1] Virtual Channel
  7340.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  7341.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  7342.                 Ctrl:   ArbSelect=Fixed
  7343.                 Status: InProgress-
  7344.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  7345.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  7346.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  7347.                         Status: NegoPending- InProgress-
  7348.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  7349.  
  7350. 01:00.0 Communication controller: Xilinx Corporation Device b880
  7351.         Subsystem: Xilinx Corporation Device b880
  7352.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  7353.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  7354.         Latency: 0
  7355.         Interrupt: pin A routed to IRQ 231
  7356.         Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
  7357.         Capabilities: [80] Power Management version 3
  7358.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  7359.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  7360.         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
  7361.                 Address: 0000000000000000  Data: 0000
  7362.         Capabilities: [c0] Express (v2) Endpoint, MSI 00
  7363.                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  7364.                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
  7365.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  7366.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  7367.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  7368.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  7369.                 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  7370.                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
  7371.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  7372.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  7373.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  7374.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
  7375.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  7376.                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
  7377.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  7378.                          Compliance De-emphasis: -6dB
  7379.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  7380.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  7381.         Capabilities: [100 v2] Advanced Error Reporting
  7382.                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  7383.                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  7384.                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  7385.                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  7386.                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  7387.                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  7388.         Capabilities: [300 v1] #19
  7389.         Kernel driver in use: 4FM
  7390.         Kernel modules: 4fm
  7391.  
  7392. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/res
  7393. rescan              resource_alignment
  7394. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  7395. root@VP88x_2017_3_PRJ0191:~# lspci -vvv
  7396. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  7397.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  7398.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  7399.         Latency: 0
  7400.         Interrupt: pin A routed to IRQ 255
  7401.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  7402.         I/O behind bridge: 00000000-00000fff
  7403.         Memory behind bridge: e0000000-e00fffff
  7404.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  7405.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  7406.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  7407.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  7408.         Capabilities: [40] Power Management version 3
  7409.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  7410.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  7411.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  7412.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  7413.                         ExtTag- RBE+
  7414.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  7415.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  7416.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  7417.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  7418.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  7419.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  7420.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  7421.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  7422.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt+
  7423.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  7424.                 RootCap: CRSVisible+
  7425.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  7426.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  7427.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  7428.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  7429.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  7430.                          Compliance De-emphasis: -6dB
  7431.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  7432.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  7433.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  7434.         Capabilities: [10c v1] Virtual Channel
  7435.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  7436.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  7437.                 Ctrl:   ArbSelect=Fixed
  7438.                 Status: InProgress-
  7439.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  7440.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  7441.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  7442.                         Status: NegoPending- InProgress-
  7443.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  7444.  
  7445. 01:00.0 Communication controller: Xilinx Corporation Device b880
  7446.         Subsystem: Xilinx Corporation Device b880
  7447.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  7448.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  7449.         Latency: 0
  7450.         Interrupt: pin A routed to IRQ 231
  7451.         Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
  7452.         Capabilities: [80] Power Management version 3
  7453.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  7454.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  7455.         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
  7456.                 Address: 0000000000000000  Data: 0000
  7457.         Capabilities: [c0] Express (v2) Endpoint, MSI 00
  7458.                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  7459.                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
  7460.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  7461.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  7462.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  7463.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  7464.                 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  7465.                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
  7466.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  7467.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  7468.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  7469.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
  7470.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  7471.                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
  7472.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  7473.                          Compliance De-emphasis: -6dB
  7474.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  7475.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  7476.         Capabilities: [100 v2] Advanced Error Reporting
  7477.                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  7478.                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  7479.                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  7480.                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  7481.                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  7482.                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  7483.         Capabilities: [300 v1] #19
  7484.         Kernel driver in use: 4FM
  7485.         Kernel modules: 4fm
  7486.  
  7487. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove
  7488. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
  7489.  
  7490. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  7491. [   74.843505] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  7492. [   74.850239] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  7493. [   74.856990] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  7494. [   74.862195] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  7495. [   74.869132] Accessing 47232 of total 1 entries in dev->bar
  7496. [   74.874579] dev->bar[u].virt_address:cffd07c value:38011121
  7497. [   74.880087] dev->bar[u].virt_address:cffd080 value:deadbeef
  7498. [   74.885644] dev->bar[u].virt_address:cffd084 value:baadf00d
  7499. [   74.891196] dev->bar[u].virt_address:cffd088 value:eba00eba
  7500. [   74.896755] dev->bar[u].virt_address:cffd08c value:beefdeaf
  7501. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  7502. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  7503.  
  7504. Global Units:
  7505. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  7506. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  7507. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  7508. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  7509. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  7510. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  7511.  
  7512.  
  7513. Running 'VP880-FMC134' on PCIe, CID725
  7514.  
  7515. -----------------------------------------------------------
  7516. Device 'VP880' (P0)
  7517. -----------------------------------------------------------
  7518. Constellation ID   : 759
  7519. Number Of Stars    : 19
  7520. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  7521. Firmware Build Code: 0
  7522. Firmware Revision  : 1.2
  7523. -----------------------------------------------------------
  7524.  
  7525.     - Unit 0 is VP88x host interface star
  7526.  
  7527. -------- Onboard Monitoring (ADC Monitor) ---------
  7528. Temp (       AD7291  ) : OK    (53.00C)
  7529. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  7530. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  7531. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  7532. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  7533. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  7534. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  7535.  
  7536. Vin6 ( ADC0     raw  ) : OK    (0.684V)
  7537. Vin6 ( ADC0    Temp  ) : OK    (66.12C)
  7538.  
  7539. Vin7 ( ADC1     raw  ) : OK    (0.685V)
  7540. Vin7 ( ADC1    Temp  ) : OK    (65.74C)
  7541. ---------------------------------------------------
  7542.  
  7543.  
  7544. -------- Onboard Monitoring (Voltage Monitor) ---------
  7545. Temp (   AD7291  ) : OK    (51.75C)
  7546. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  7547. Vin1 (  3.3Vclk  ) : OK    ( 3.25V)
  7548. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  7549. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  7550. Vin4 (     Vadj  ) : OK    ( 1.81V)
  7551. Vin5 (  3.3Vfmc  ) : OK    ( 3.25V)
  7552. Vin6 ( 12.0Vfmc  ) : OK    (11.95V)
  7553. Vin7 (     Viob  ) : OK    ( 1.81V)
  7554. -------------------------------------------------------
  7555.  
  7556. Configuring clock tree ...
  7557.  
  7558.  
  7559.  Setting Clock_Mode
  7560. Internal Reference Mode
  7561. ^C
  7562. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove Xilinx Zynq MP First Stage Boot Loader
  7563. Release 2017.3   May 24 2018  -  10:35:53
  7564. Marvell PHY reset
  7565. SI5338 0x70 not configured
  7566. SI5338 0x70 configuration finished
  7567. SI5338 0x71 not configured
  7568. SI5338 0x71 configuration finished
  7569.  
  7570.  
  7571. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  7572.  
  7573. I2C:   ready
  7574. DRAM:  2 GiB
  7575. EL Level:       EL2
  7576. Chip ID:        xczu3eg
  7577. MMC:   Card did not respond to voltage select!
  7578. sdhci@ff160000 - probe failed: -95
  7579. Card did not respond to voltage select!
  7580.  
  7581. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  7582. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  7583. *** Warning - bad CRC, using default environment
  7584.  
  7585. In:    serial
  7586. Out:   serial
  7587. Err:   serial
  7588. Bootmode: QSPI_MODE
  7589. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  7590. eth0: ethernet@ff0c0000
  7591. U-BOOT for VP88x_2017_3_PRJ0191
  7592.  
  7593. Hit any key to stop autoboot:  0
  7594. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  7595. device 0 offset 0x540000, size 0x2200000
  7596. SF: 35651584 bytes @ 0x540000 Read: OK
  7597. ## Loading kernel from FIT Image at 10000000 ...
  7598.    Using 'conf@1' configuration
  7599.    Trying 'kernel@0' kernel subimage
  7600.      Description:  Linux Kernel
  7601.      Type:         Kernel Image
  7602.      Compression:  uncompressed
  7603.      Data Start:   0x100000d8
  7604.      Data Size:    12503552 Bytes = 11.9 MiB
  7605.      Architecture: AArch64
  7606.      OS:           Linux
  7607.      Load Address: 0x00080000
  7608.      Entry Point:  0x00080000
  7609.      Hash algo:    sha1
  7610.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  7611.    Verifying Hash Integrity ... sha1+ OK
  7612. ## Loading ramdisk from FIT Image at 10000000 ...
  7613.    Using 'conf@1' configuration
  7614.    Trying 'ramdisk@0' ramdisk subimage
  7615.      Description:  ramdisk
  7616.      Type:         RAMDisk Image
  7617.      Compression:  uncompressed
  7618.      Data Start:   0x10bf54e4
  7619.      Data Size:    8973721 Bytes = 8.6 MiB
  7620.      Architecture: AArch64
  7621.      OS:           Linux
  7622.      Load Address: unavailable
  7623.      Entry Point:  unavailable
  7624.      Hash algo:    sha1
  7625.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  7626.    Verifying Hash Integrity ... sha1+ OK
  7627. ## Loading fdt from FIT Image at 10000000 ...
  7628.    Using 'conf@1' configuration
  7629.    Trying 'fdt@0' fdt subimage
  7630.      Description:  Flattened Device Tree blob
  7631.      Type:         Flat Device Tree
  7632.      Compression:  uncompressed
  7633.      Data Start:   0x10becbd0
  7634.      Data Size:    34910 Bytes = 34.1 KiB
  7635.      Architecture: AArch64
  7636.      Hash algo:    sha1
  7637.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  7638.    Verifying Hash Integrity ... sha1+ OK
  7639.    Booting using the fdt blob at 0x10becbd0
  7640.    Loading Kernel Image ... OK
  7641.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  7642.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  7643.  
  7644. Starting kernel ...
  7645.  
  7646. [    0.000000] Booting Linux on physical CPU 0x0
  7647. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  7648. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  7649. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  7650. [    0.000000] bootconsole [cdns0] enabled
  7651. [    0.000000] efi: Getting EFI parameters from FDT:
  7652. [    0.000000] efi: UEFI not found.
  7653. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  7654. [    0.000000] psci: probing for conduit method from DT.
  7655. [    0.000000] psci: PSCIv1.0 detected in firmware.
  7656. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  7657. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  7658. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  7659. [    0.000000] Detected VIPT I-cache on CPU0
  7660. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  7661. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  7662. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  7663. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  7664. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  7665. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  7666. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  7667. [    0.000000] Virtual kernel memory layout:
  7668. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  7669. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  7670. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  7671. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  7672. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  7673. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  7674. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  7675. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  7676. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  7677. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  7678. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  7679. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  7680. [    0.000000] Hierarchical RCU implementation.
  7681. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  7682. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  7683. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  7684. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  7685. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  7686. [    0.000000] GIC: Using split EOI/Deactivate mode
  7687. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  7688. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  7689. [    0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  7690. [    0.008252] Console: colour dummy device 80x25
  7691. [    0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  7692. [    0.022877] pid_max: default: 32768 minimum: 301
  7693. [    0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  7694. [    0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  7695. [    0.041857] ASID allocator initialised with 65536 entries
  7696. [    0.047551] zynqmp_plat_init Power management API v0.3
  7697. [    0.052569] EFI services will not be available.
  7698. [    0.057331] Detected VIPT I-cache on CPU1
  7699. [    0.057366] CPU1: Booted secondary processor [410fd034]
  7700. [    0.057625] Detected VIPT I-cache on CPU2
  7701. [    0.057641] CPU2: Booted secondary processor [410fd034]
  7702. [    0.057890] Detected VIPT I-cache on CPU3
  7703. [    0.057906] CPU3: Booted secondary processor [410fd034]
  7704. [    0.057939] Brought up 4 CPUs
  7705. [    0.088228] SMP: Total of 4 processors activated.
  7706. [    0.092905] CPU features: detected feature: 32-bit EL0 Support
  7707. [    0.098701] CPU: All CPU(s) started at EL2
  7708. [    0.102772] alternatives: patching kernel code
  7709. [    0.108032] devtmpfs: initialized
  7710. [    0.115565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  7711. [    0.136589] xor: measuring software checksum speed
  7712. [    0.181261]    8regs     :  2543.000 MB/sec
  7713. [    0.221286]    8regs_prefetch:  2266.000 MB/sec
  7714. [    0.265655]    32regs    :  3125.000 MB/sec
  7715. [    0.305682]    32regs_prefetch:  2627.000 MB/sec
  7716. [    0.310104] xor: using function: 32regs (3125.000 MB/sec)
  7717. [    0.315559] pinctrl core: initialized pinctrl subsystem
  7718. [    0.321240] NET: Registered protocol family 16
  7719. [    0.326335] Failed to initialise IOMMU /amba/smmu@fd800000
  7720. [    0.331831] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  7721. [    0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  7722. [    0.374343] DMA: preallocated 65536 KiB pool for atomic allocations
  7723. [    0.390718] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  7724. [    0.398193] ARM CCI_400_r1 PMU driver probed[    0.404953] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  7725. [    0.431667] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  7726. [    0.504876] raid6: int64x1  gen()   446 MB/s
  7727. [    0.576923] raid6: int64x1  xor()   485 MB/s
  7728. [    0.649004] raid6: int64x2  gen()   741 MB/s
  7729. [    0.720992] raid6: int64x2  xor()   661 MB/s
  7730. [    0.793057] raid6: int64x4  gen()  1086 MB/s
  7731. [    0.865104] raid6: int64x4  xor()   816 MB/s
  7732. [    0.937158] raid6: int64x8  gen()  1266 MB/s
  7733. [    1.009187] raid6: int64x8  xor()   824 MB/s
  7734. [    1.081260] raid6: neonx1   gen()   798 MB/s
  7735. [    1.153261] raid6: neonx1   xor()   837 MB/s
  7736. [    1.225307] raid6: neonx2   gen()  1286 MB/s
  7737. [    1.297354] raid6: neonx2   xor()  1143 MB/s
  7738. [    1.369374] raid6: neonx4   gen()  1663 MB/s
  7739. [    1.441427] raid6: neonx4   xor()  1306 MB/s
  7740. [    1.513475] raid6: neonx8   gen()  1752 MB/s
  7741. [    1.585511] raid6: neonx8   xor()  1348 MB/s
  7742. [    1.589586] raid6: using algorithm neonx8 gen() 1752 MB/s
  7743. [    1.594947] raid6: .... xor() 1348 MB/s, rmw enabled
  7744. [    1.599879] raid6: using intx1 recovery algorithm
  7745. [    1.605037] Write failed gate address:1000f02
  7746. [    1.612969] SCSI subsystem initialized
  7747. [    1.616759] usbcore: registered new interface driver usbfs
  7748. [    1.622093] usbcore: registered new interface driver hub
  7749. [    1.627367] usbcore: registered new device driver usb
  7750. [    1.632414] media: Linux media interface: v0.10
  7751. [    1.636865] Linux video capture interface: v2.00
  7752. [    1.641451] pps_core: LinuxPPS API ver. 1 registered
  7753. [    1.646355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  7754. [    1.655449] PTP clock support registered
  7755. [    1.659348] EDAC MC: Ver: 3.0.0
  7756. [    1.662749] FPGA manager framework
  7757. [    1.666092] fpga-region fpga-full: FPGA Region probed
  7758. [    1.671096] Advanced Linux Sound Architecture Driver Initialized.
  7759. [    1.677353] Bluetooth: Core ver 2.22
  7760. [    1.680761] NET: Registered protocol family 31
  7761. [    1.685152] Bluetooth: HCI device and connection manager initialized
  7762. [    1.691470] Bluetooth: HCI socket layer initialized
  7763. [    1.696312] Bluetooth: L2CAP socket layer initialized
  7764. [    1.701338] Bluetooth: SCO socket layer initialized
  7765. [    1.706739] clocksource: Switched to clocksource arch_sys_counter
  7766. [    1.712729] VFS: Disk quotas dquot_6.6.0
  7767. [    1.716567] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  7768. [    1.726793] NET: Registered protocol family 2
  7769. [    1.731329] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  7770. [    1.738445] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  7771. [    1.745227] TCP: Hash tables configured (established 16384 bind 16384)
  7772. [    1.751628] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  7773. [    1.757559] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  7774. [    1.764067] NET: Registered protocol family 1
  7775. [    1.768507] RPC: Registered named UNIX socket transport module.
  7776. [    1.774233] RPC: Registered udp transport module.
  7777. [    1.778900] RPC: Registered tcp transport module.
  7778. [    1.783570] RPC: Registered tcp NFSv4.1 backchannel transport module.
  7779. [    1.790116] Trying to unpack rootfs image as initramfs...
  7780. [    2.114110] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  7781. [    2.121536] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  7782. [    2.129838] futex hash table entries: 1024 (order: 5, 131072 bytes)
  7783. [    2.136486] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  7784. [    2.143478] NFS: Registering the id_resolver key type
  7785. [    2.148360] Key type id_resolver registered
  7786. [    2.152486] Key type id_legacy registered
  7787. [    2.156469] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  7788. [    2.163141] ntfs: driver 2.1.32 [Flags: R/W].
  7789. [    2.167468] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  7790. [    2.182226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  7791. [    2.189440] io scheduler noop registered
  7792. [    2.193323] io scheduler deadline registered
  7793. [    2.197567] io scheduler cfq registered (default)
  7794. [    2.202824] nwl-pcie fd0e0000.pcie: Link is DOWN
  7795. [    2.207284] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  7796. [    2.212889] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  7797. [    2.218756] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  7798. [    2.224977] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  7799. [    2.231042] pci_bus 0000:00: root bus resource [bus 00-ff]
  7800. [    2.236488] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  7801. [    2.243325] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  7802. [    2.251031] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  7803. [    2.256780] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  7804. [    2.263153] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  7805. [    2.270210] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  7806. [    2.277360] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  7807. [    2.284221] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  7808. [    2.291141] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  7809. [    2.298061] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  7810. [    2.304982] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  7811. [    2.311902] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  7812. [    2.318824] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  7813. [    2.325747] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  7814. [    2.332700] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  7815. [    2.339583] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  7816. [    2.346499] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  7817. [    2.353424] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  7818. [    2.360342] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  7819. [    2.367260] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  7820. [    2.374183] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  7821. [    2.381101] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  7822. [    2.409233] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  7823. [    2.416751] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  7824. [    2.425777] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢º000) is a xuartps
  7825.      Êêconsole [ttyPS0] enabled
  7826. [    2.434719] console [ttyPS0] enabled
  7827. [    2.441684] bootconsole [cdns0] disabled
  7828. [    2.441684] bootconsole [cdns0] disabled
  7829. [    2.449737] Unable to detect cache hierarchy from DT for CPU 0
  7830. [    2.461279] brd: module loaded
  7831. [    2.467541] loop: module loaded
  7832. [    2.471521] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  7833. [    2.480405] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  7834. [    2.491133] scsi host0: ahci-ceva
  7835. [    2.494542] scsi host1: ahci-ceva
  7836. [    2.497882] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  7837. [    2.505715] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  7838. [    2.513750] mtdoops: mtd device (mtddev=name/number) must be supplied
  7839. [    2.521070] zynqmp-qspi ff0f0000.spi: rx bus width not found
  7840. [    2.527013] m25p80 spi0.0: found n25q00, expected n25q512a
  7841. [    2.532738] m25p80 spi0.0: n25q00 (131072 Kbytes)
  7842. [    2.537373] 5 ofpart partitions found on MTD device spi0.0
  7843. [    2.542821] Creating 5 MTD partitions on "spi0.0":
  7844. [    2.547598] 0x000000000000-0x000000500000 : "boot"
  7845. [    2.552865] 0x000000500000-0x000000540000 : "bootenv"
  7846. [    2.558262] 0x000000540000-0x000002740000 : "kernel"
  7847. [    2.563570] 0x000002740000-0x000003740000 : "user"
  7848. [    2.568689] 0x000003740000-0x000003750000 : "test"
  7849. [    2.574690] libphy: Fixed MDIO Bus: probed
  7850. [    2.579805] tun: Universal TUN/TAP device driver, 1.6
  7851. [    2.584774] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  7852. [    2.591061] CAN device driver interface
  7853. [    2.595388] macb ff0c0000.ethernet: Not enabling partial store and forward
  7854. [    2.602694] libphy: MACB_mii_bus: probed
  7855. [    2.683012] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  7856. [    2.692757] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  7857. [    2.705339] usbcore: registered new interface driver asix
  7858. [    2.710704] usbcore: registered new interface driver ax88179_178a
  7859. [    2.716749] usbcore: registered new interface driver cdc_ether
  7860. [    2.722565] usbcore: registered new interface driver net1080
  7861. [    2.728207] usbcore: registered new interface driver cdc_subset
  7862. [    2.734111] usbcore: registered new interface driver zaurus
  7863. [    2.739677] usbcore: registered new interface driver cdc_ncm
  7864. [    2.745637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  7865. [    2.752080] ehci-pci: EHCI PCI platform driver
  7866. [    2.756735] usbcore: registered new interface driver uas
  7867. [    2.761993] usbcore: registered new interface driver usb-storage
  7868. [    2.768247] mousedev: PS/2 mouse device common for all mice
  7869. [    2.774136] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  7870. [    2.781303] i2c /dev entries driver
  7871. [    2.784935] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  7872. [    2.790993] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  7873. [    2.797758] usbcore: registered new interface driver uvcvideo
  7874. [    2.803424] USB Video Class driver (1.1.1)
  7875. [    2.807865] Bluetooth: HCI UART driver ver 2.3
  7876. [    2.812228] Bluetooth: HCI UART protocol H4 registered
  7877. [    2.817343] Bluetooth: HCI UART protocol BCSP registered
  7878. [    2.822638] Bluetooth: HCI UART protocol LL registered
  7879. [    2.827758] Bluetooth: HCI UART protocol ATH3K registered
  7880. [    2.831866] ata1: SATA link down (SStatus 0 SControl 330)
  7881. [    2.831902] ata2: SATA link down (SStatus 0 SControl 330)
  7882. [    2.843903] Bluetooth: HCI UART protocol Three-wire (H5) registered
  7883. [    2.850188] Bluetooth: HCI UART protocol Intel registered
  7884. [    2.855571] Bluetooth: HCI UART protocol Broadcom registered
  7885. [    2.861177] Bluetooth: HCI UART protocol QCA registered
  7886. [    2.866417] usbcore: registered new interface driver bcm203x
  7887. [    2.872058] usbcore: registered new interface driver bpa10x
  7888. [    2.877613] usbcore: registered new interface driver bfusb
  7889. [    2.883084] usbcore: registered new interface driver btusb
  7890. [    2.888519] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  7891. [    2.894211] usbcore: registered new interface driver ath3k
  7892. [    2.899753] EDAC MC: ECC not enabled
  7893. [    2.903377] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  7894. [    2.912412] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  7895. [    2.924709] sdhci: Secure Digital Host Controller Interface driver
  7896. [    2.930799] sdhci: Copyright(c) Pierre Ossman
  7897. [    2.935138] sdhci-pltfm: SDHCI platform and OF driver helper
  7898. [    2.986750] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  7899. [    2.994871] ledtrig-cpu: registered to indicate activity on CPUs
  7900. [    3.000920] usbcore: registered new interface driver usbhid
  7901. [    3.006405] usbhid: USB HID core driver
  7902. [    3.011804] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  7903. [    3.018666] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  7904. [    3.025830] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  7905. [    3.033182] PLL: shutdown
  7906. [    3.036610] Write failed to divider address:fd1a007c
  7907. [    3.041644] PLL: enable
  7908. [    3.044169] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  7909. [    3.052209] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  7910. [    3.061877] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  7911. [    3.071732] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  7912. [    3.079154] pktgen: Packet Generator for packet performance testing. Version: 2.75
  7913. [    3.088867] Netfilter messages via NETLINK v0.30.
  7914. [    3.093605] ip_tables: (C) 2000-2006 Netfilter Core Team
  7915. [    3.098878] Initializing XFRM netlink socket
  7916. [    3.103263] NET: Registered protocol family 10
  7917. [    3.108266] ip6_tables: (C) 2000-2006 Netfilter Core Team
  7918. [    3.113617] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  7919. [    3.119842] NET: Registered protocol family 17
  7920. [    3.124210] NET: Registered protocol family 15
  7921. [    3.128637] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  7922. [    3.141559] Ebtables v2.0 registered
  7923. [    3.145170] can: controller area network core (rev 20120528 abi 9)
  7924. [    3.151317] NET: Registered protocol family 29
  7925. [    3.155708] can: raw protocol (rev 20120528)
  7926. [    3.159960] can: broadcast manager protocol (rev 20161123 t)
  7927. [    3.165604] can: netlink gateway (rev 20130117) max_hops=1
  7928. [    3.171902] Bluetooth: RFCOMM TTY layer initialized
  7929. [    3.176701] Bluetooth: RFCOMM socket layer initialized
  7930. [    3.181825] Bluetooth: RFCOMM ver 1.11
  7931. [    3.185552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  7932. [    3.190844] Bluetooth: BNEP filters: protocol multicast
  7933. [    3.196056] Bluetooth: BNEP socket layer initialized
  7934. [    3.201000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  7935. [    3.206905] Bluetooth: HIDP socket layer initialized
  7936. [    3.212027] 9pnet: Installing 9P2000 support
  7937. [    3.216224] Key type dns_resolver registered
  7938. [    3.220865] registered taskstats version 1
  7939. [    3.225258] Btrfs loaded, crc32c=crc32c-generic
  7940. [    3.236940] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  7941. [    3.242369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  7942. [    3.250232] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  7943. [    3.258884] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  7944. [    3.264958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  7945. [    3.271660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  7946. [    3.278864] usb usb1: Product: xHCI Host Controller
  7947. [    3.283721] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  7948. [    3.289015] usb usb1: SerialNumber: xhci-hcd.0.auto
  7949. [    3.294180] hub 1-0:1.0: USB hub found
  7950. [    3.297861] hub 1-0:1.0: 1 port detected
  7951. [    3.301860] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  7952. [    3.307267] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  7953. [    3.314936] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  7954. [    3.323036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  7955. [    3.329744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  7956. [    3.336947] usb usb2: Product: xHCI Host Controller
  7957. [    3.341807] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  7958. [    3.347102] usb usb2: SerialNumber: xhci-hcd.0.auto
  7959. [    3.352164] hub 2-0:1.0: USB hub found
  7960. [    3.355840] hub 2-0:1.0: 1 port detected
  7961. [    3.360115] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
  7962. [    3.368313] clk: Not disabling unused clocks
  7963. [    3.372502] ALSA device list:
  7964. [    3.375450]   #0: DisplayPort monitor
  7965. [    3.379714] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  7966. INIT: version 2.88 booting
  7967. Starting udev
  7968. [    3.501459] udevd[1612]: starting version 3.2
  7969. [    3.506089] random: udevd: uninitialized urandom read (16 bytes read)
  7970. [    3.512598] random: udevd: uninitialized urandom read (16 bytes read)
  7971. [    3.519017] random: udevd: uninitialized urandom read (16 bytes read)
  7972. [    3.525415] random: udevd: uninitialized urandom read (16 bytes read)
  7973. [    3.535457] udevd[1613]: starting eudev-3.2
  7974. [    3.578535] random: udevd: uninitialized urandom read (16 bytes read)
  7975. [    3.588374] random: udevd: uninitialized urandom read (16 bytes read)
  7976. [    3.610698] dsaxidma: loading out-of-tree module taints kernel.
  7977. [    3.610968] dsaxidma: loading out-of-tree module taints kernel.
  7978. [    3.611625] <dma1> init: registered
  7979. [    3.631987] <dma2> init: registered
  7980. Populating dev cache
  7981. [    4.109418] random: dd: uninitialized urandom read (512 bytes read)
  7982. Thu Jul 26 08:51:43 UTC 2018
  7983. Starting internet superserver: inetd.
  7984. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  7985. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  7986. INIT: Entering runlevel: 5
  7987. Hello World
  7988. [22]:0x12
  7989. [20]:0x201
  7990. [20]:0x201
  7991. [22]:0x1
  7992. [0]:0x140
  7993. [0]:0x140
  7994. Configuring network interfaces... [    4.408381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  7995. done.
  7996. Starting Dropbear SSH server: [    4.437089] random: dropbearkey: uninitialized urandom read (32 bytes read)
  7997. [    4.447178] random: dropbearkey: uninitialized urandom read (32 bytes read)
  7998. Generating key, this may take a while...
  7999. [    5.426856] macb ff0c0000.ethernet eth0: link up (1000/Full)
  8000. [    5.432462] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  8001. [   16.674871] random: dropbearkey: uninitialized urandom read (32 bytes read)
  8002. Public key portion is:
  8003. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDciVcCeXvoel1pkntlt6NG8OacZoeySa/OJat+qwcizxoNuRJRYj/R/zC5OL7FFP4SYmlVmORSEho3XtLfpYk+yLPLact8BefB0XXkQU8cYVWfFhHvjiDrp/M44I2ymm6M9R2boAMBCEDZU/mw443azEczwE0q8V0+yam6jGsQHAeZSoDW3tEJaYgYVwD3AbmPDrEsQxhk1rMvkJf4O5JntXi10E9oL5wrWc8vHqpyETmA53HXBRn4K7TfgaXTugNrhlohFNorXwF4QG3dUUaFHjJGFFP0JEeKSbOwpZC+e6zQHe3S+YsZI4A1UgvX1Jwp52W8MvaV/HW3VBP1ZofF root@VP88x_2017_3_PRJ0191
  8004. Fingerprint: md5 31:c5:08:ad:81:94:3f:96:be:7f:e2[   16.727196] random: fast init done
  8005. :c3:75:0d:5b:db
  8006. dropbear.
  8007. Starting syslogd/klogd: done
  8008. [   17.158550] random: crng init done
  8009. [   18.946210] jffs2: notice: (2076) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  8010. hello world.....
  8011. Starting tcf-agent: OK
  8012.  
  8013. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  8014. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  8015.  
  8016. unitapi_auto_config returned -50
  8017.  
  8018. Invalid device handle '1'
  8019. Press a key to exit the application
  8020. ^C
  8021. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1^C
  8022. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
  8023. root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
  8024. [   48.979275] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  8025. root@VP88x_2017_3_PRJ0191:~# cp /mnt/
  8026. diagnostic.elf  myfile          pciconfig1
  8027. iperf           pciconfig0      start.sh
  8028. root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
  8029. cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
  8030. root@VP88x_2017_3_PRJ0191:~# reboot
  8031.  
  8032. The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 á:54:1
  8033. INIT: Sending processes the TERM signal
  8034. root@VP88x_2017_3_PRJ0191:~# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2063)
  8035. dropbear.
  8036. Stopping syslogd/klogd: stopped syslogd (pid 2071)
  8037. stopped klogd (pid 2074)
  8038. done
  8039. Stopping tcf-agent: OK
  8040. Deconfiguring network interfaces... done.
  8041. Sending all processes the TERM signal...
  8042. logout
  8043. [  156.978773] macb ff0c0000.ethernet eth0: link down
  8044. Sending all processes the KILL signal...
  8045. Unmounting remote filesystems...
  8046. Deactivating swap...
  8047. Unmounting local filesystems...
  8048. êXilinx Zynq MP First Stage Boot Loader arting system
  8049. Release 2017.3   May 24 2018  -  10:35:53
  8050. Marvell PHY reset
  8051. SI5338 0x70 already configured
  8052. SI5338 0x71 already configured
  8053.  
  8054.  
  8055. U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
  8056.  
  8057. I2C:   ready
  8058. DRAM:  2 GiB
  8059. EL Level:       EL2
  8060. Chip ID:        xczu3eg
  8061. MMC:   Card did not respond to voltage select!
  8062. sdhci@ff160000 - probe failed: -95
  8063. Card did not respond to voltage select!
  8064.  
  8065. zynqmp_qspi_ofdata_to_platdata: CLK 300000000
  8066. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  8067. *** Warning - bad CRC, using default environment
  8068.  
  8069. In:    serial
  8070. Out:   serial
  8071. Err:   serial
  8072. Bootmode: QSPI_MODE
  8073. Net:   ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
  8074. eth0: ethernet@ff0c0000
  8075. U-BOOT for VP88x_2017_3_PRJ0191
  8076.  
  8077. Hit any key to stop autoboot:  0
  8078. SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
  8079. device 0 offset 0x540000, size 0x2200000
  8080. SF: 35651584 bytes @ 0x540000 Read: OK
  8081. ## Loading kernel from FIT Image at 10000000 ...
  8082.    Using 'conf@1' configuration
  8083.    Trying 'kernel@0' kernel subimage
  8084.      Description:  Linux Kernel
  8085.      Type:         Kernel Image
  8086.      Compression:  uncompressed
  8087.      Data Start:   0x100000d8
  8088.      Data Size:    12503552 Bytes = 11.9 MiB
  8089.      Architecture: AArch64
  8090.      OS:           Linux
  8091.      Load Address: 0x00080000
  8092.      Entry Point:  0x00080000
  8093.      Hash algo:    sha1
  8094.      Hash value:   6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
  8095.    Verifying Hash Integrity ... sha1+ OK
  8096. ## Loading ramdisk from FIT Image at 10000000 ...
  8097.    Using 'conf@1' configuration
  8098.    Trying 'ramdisk@0' ramdisk subimage
  8099.      Description:  ramdisk
  8100.      Type:         RAMDisk Image
  8101.      Compression:  uncompressed
  8102.      Data Start:   0x10bf54e4
  8103.      Data Size:    8973721 Bytes = 8.6 MiB
  8104.      Architecture: AArch64
  8105.      OS:           Linux
  8106.      Load Address: unavailable
  8107.      Entry Point:  unavailable
  8108.      Hash algo:    sha1
  8109.      Hash value:   4b595c4e0c42ac8967d3d732b389c6521f0b492f
  8110.    Verifying Hash Integrity ... sha1+ OK
  8111. ## Loading fdt from FIT Image at 10000000 ...
  8112.    Using 'conf@1' configuration
  8113.    Trying 'fdt@0' fdt subimage
  8114.      Description:  Flattened Device Tree blob
  8115.      Type:         Flat Device Tree
  8116.      Compression:  uncompressed
  8117.      Data Start:   0x10becbd0
  8118.      Data Size:    34910 Bytes = 34.1 KiB
  8119.      Architecture: AArch64
  8120.      Hash algo:    sha1
  8121.      Hash value:   20fc450d3d82f1967aba254f93c3704b6f5d1f6e
  8122.    Verifying Hash Integrity ... sha1+ OK
  8123.    Booting using the fdt blob at 0x10becbd0
  8124.    Loading Kernel Image ... OK
  8125.    Loading Ramdisk to 07771000, end 07fffd99 ... OK
  8126.    Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
  8127.  
  8128. Starting kernel ...
  8129.  
  8130. [    0.000000] Booting Linux on physical CPU 0x0
  8131. [    0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
  8132. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  8133. [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  8134. [    0.000000] bootconsole [cdns0] enabled
  8135. [    0.000000] efi: Getting EFI parameters from FDT:
  8136. [    0.000000] efi: UEFI not found.
  8137. [    0.000000] cma: Reserved 512 MiB at 0x0000000060000000
  8138. [    0.000000] psci: probing for conduit method from DT.
  8139. [    0.000000] psci: PSCIv1.0 detected in firmware.
  8140. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  8141. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  8142. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
  8143. [    0.000000] Detected VIPT I-cache on CPU0
  8144. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  8145. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517120
  8146. [    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
  8147. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  8148. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  8149. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  8150. [    0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
  8151. [    0.000000] Virtual kernel memory layout:
  8152. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  8153. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  8154. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff80088d0000   (  8512 KB)
  8155. [    0.000000]     .rodata : 0xffffff80088d0000 - 0xffffff8008b70000   (  2688 KB)
  8156. [    0.000000]       .init : 0xffffff8008b70000 - 0xffffff8008be0000   (   448 KB)
  8157. [    0.000000]       .data : 0xffffff8008be0000 - 0xffffff8008c6ca00   (   563 KB)
  8158. [    0.000000]        .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434   (   383 KB)
  8159. [    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  8160. [    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  8161. [    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  8162. [    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 MB actual)
  8163. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
  8164. [    0.000000] Hierarchical RCU implementation.
  8165. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  8166. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  8167. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  8168. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  8169. [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  8170. [    0.000000] GIC: Using split EOI/Deactivate mode
  8171. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
  8172. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  8173. [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  8174. [    0.008251] Console: colour dummy device 80x25
  8175. [    0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  8176. [    0.022877] pid_max: default: 32768 minimum: 301
  8177. [    0.027568] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  8178. [    0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  8179. [    0.041858] ASID allocator initialised with 65536 entries
  8180. [    0.047560] zynqmp_plat_init Power management API v0.3
  8181. [    0.052577] EFI services will not be available.
  8182. [    0.057338] Detected VIPT I-cache on CPU1
  8183. [    0.057371] CPU1: Booted secondary processor [410fd034]
  8184. [    0.057630] Detected VIPT I-cache on CPU2
  8185. [    0.057646] CPU2: Booted secondary processor [410fd034]
  8186. [    0.057896] Detected VIPT I-cache on CPU3
  8187. [    0.057912] CPU3: Booted secondary processor [410fd034]
  8188. [    0.057945] Brought up 4 CPUs
  8189. [    0.088228] SMP: Total of 4 processors activated.
  8190. [    0.092904] CPU features: detected feature: 32-bit EL0 Support
  8191. [    0.098701] CPU: All CPU(s) started at EL2
  8192. [    0.102773] alternatives: patching kernel code
  8193. [    0.108033] devtmpfs: initialized
  8194. [    0.115552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  8195. [    0.136537] xor: measuring software checksum speed
  8196. [    0.181210]    8regs     :  2542.000 MB/sec
  8197. [    0.221234]    8regs_prefetch:  2266.000 MB/sec
  8198. [    0.265603]    32regs    :  3125.000 MB/sec
  8199. [    0.305631]    32regs_prefetch:  2627.000 MB/sec
  8200. [    0.310051] xor: using function: 32regs (3125.000 MB/sec)
  8201. [    0.315507] pinctrl core: initialized pinctrl subsystem
  8202. [    0.321184] NET: Registered protocol family 16
  8203. [    0.326288] Failed to initialise IOMMU /amba/smmu@fd800000
  8204. [    0.331792] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
  8205. [    0.338996] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  8206. [    0.374317] DMA: preallocated 65536 KiB pool for atomic allocations
  8207. [    0.390724] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  8208. [    0.398196] ARM CCI_400_r1 PMU driver probed[    0.404972] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  8209. [    0.439923] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  8210. [    0.512820] raid6: int64x1  gen()   447 MB/s
  8211. [    0.584882] raid6: int64x1  xor()   486 MB/s
  8212. [    0.656926] raid6: int64x2  gen()   741 MB/s
  8213. [    0.728951] raid6: int64x2  xor()   661 MB/s
  8214. [    0.800998] raid6: int64x4  gen()  1086 MB/s
  8215. [    0.873041] raid6: int64x4  xor()   816 MB/s
  8216. [    0.945064] raid6: int64x8  gen()  1265 MB/s
  8217. [    1.017131] raid6: int64x8  xor()   824 MB/s
  8218. [    1.089169] raid6: neonx1   gen()   796 MB/s
  8219. [    1.161211] raid6: neonx1   xor()   837 MB/s
  8220. [    1.233272] raid6: neonx2   gen()  1286 MB/s
  8221. [    1.305285] raid6: neonx2   xor()  1143 MB/s
  8222. [    1.377337] raid6: neonx4   gen()  1666 MB/s
  8223. [    1.449361] raid6: neonx4   xor()  1306 MB/s
  8224. [    1.521418] raid6: neonx8   gen()  1752 MB/s
  8225. [    1.593459] raid6: neonx8   xor()  1348 MB/s
  8226. [    1.597535] raid6: using algorithm neonx8 gen() 1752 MB/s
  8227. [    1.602897] raid6: .... xor() 1348 MB/s, rmw enabled
  8228. [    1.607827] raid6: using intx1 recovery algorithm
  8229. [    1.612979] Write failed gate address:1000f02
  8230. [    1.620929] SCSI subsystem initialized
  8231. [    1.624718] usbcore: registered new interface driver usbfs
  8232. [    1.630051] usbcore: registered new interface driver hub
  8233. [    1.635323] usbcore: registered new device driver usb
  8234. [    1.640370] media: Linux media interface: v0.10
  8235. [    1.644822] Linux video capture interface: v2.00
  8236. [    1.649410] pps_core: LinuxPPS API ver. 1 registered
  8237. [    1.654314] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  8238. [    1.663406] PTP clock support registered
  8239. [    1.667309] EDAC MC: Ver: 3.0.0
  8240. [    1.670660] FPGA manager framework
  8241. [    1.673996] fpga-region fpga-full: FPGA Region probed
  8242. [    1.678999] Advanced Linux Sound Architecture Driver Initialized.
  8243. [    1.685261] Bluetooth: Core ver 2.22
  8244. [    1.688675] NET: Registered protocol family 31
  8245. [    1.693058] Bluetooth: HCI device and connection manager initialized
  8246. [    1.699376] Bluetooth: HCI socket layer initialized
  8247. [    1.704218] Bluetooth: L2CAP socket layer initialized
  8248. [    1.709244] Bluetooth: SCO socket layer initialized
  8249. [    1.714672] clocksource: Switched to clocksource arch_sys_counter
  8250. [    1.720668] VFS: Disk quotas dquot_6.6.0
  8251. [    1.724498] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  8252. [    1.734760] NET: Registered protocol family 2
  8253. [    1.739299] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  8254. [    1.746421] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  8255. [    1.753207] TCP: Hash tables configured (established 16384 bind 16384)
  8256. [    1.759601] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  8257. [    1.765535] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  8258. [    1.772050] NET: Registered protocol family 1
  8259. [    1.776558] RPC: Registered named UNIX socket transport module.
  8260. [    1.782286] RPC: Registered udp transport module.
  8261. [    1.786953] RPC: Registered tcp transport module.
  8262. [    1.791625] RPC: Registered tcp NFSv4.1 backchannel transport module.
  8263. [    1.798175] Trying to unpack rootfs image as initramfs...
  8264. [    2.121248] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
  8265. [    2.128677] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  8266. [    2.136971] futex hash table entries: 1024 (order: 5, 131072 bytes)
  8267. [    2.143594] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  8268. [    2.150547] NFS: Registering the id_resolver key type
  8269. [    2.155432] Key type id_resolver registered
  8270. [    2.159574] Key type id_legacy registered
  8271. [    2.163546] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  8272. [    2.170217] ntfs: driver 2.1.32 [Flags: R/W].
  8273. [    2.174543] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  8274. [    2.189340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  8275. [    2.196550] io scheduler noop registered
  8276. [    2.200438] io scheduler deadline registered
  8277. [    2.204679] io scheduler cfq registered (default)
  8278. [    2.209939] nwl-pcie fd0e0000.pcie: Link is UP
  8279. [    2.214232] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
  8280. [    2.219835] OF: PCI:   MEM 0xe0000000..0xefffffff -> 0xe0000000
  8281. [    2.225702] OF: PCI:   MEM 0x600000000..0x7ffffffff -> 0x600000000
  8282. [    2.231925] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
  8283. [    2.237988] pci_bus 0000:00: root bus resource [bus 00-ff]
  8284. [    2.243434] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  8285. [    2.250270] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
  8286. [    2.258191] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  8287. [    2.264786] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
  8288. [    2.271533] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
  8289. [    2.276720] pci 0000:00:00.0:   bridge window [mem 0xe0000000-0xe00fffff]
  8290. [    2.284189] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  8291. [    2.290560] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  8292. [    2.297612] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  8293. [    2.304761] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  8294. [    2.311625] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  8295. [    2.318543] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  8296. [    2.325463] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  8297. [    2.332386] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  8298. [    2.339300] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  8299. [    2.346223] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  8300. [    2.353146] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  8301. [    2.360103] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  8302. [    2.366985] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  8303. [    2.373906] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  8304. [    2.380828] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  8305. [    2.387745] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  8306. [    2.394672] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  8307. [    2.401587] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  8308. [    2.408504] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  8309. [    2.436712] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  8310. [    2.444186] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
  8311. [    2.453275] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢²0000) is a xuartps
  8312.     ºêconsole [ttyPS0] enabled
  8313. [    2.462217] console [ttyPS0] enabled
  8314. [    2.469182] bootconsole [cdns0] disabled
  8315. [    2.469182] bootconsole [cdns0] disabled
  8316. [    2.477250] Unable to detect cache hierarchy from DT for CPU 0
  8317. [    2.487708] brd: module loaded
  8318. [    2.493491] loop: module loaded
  8319. [    2.497474] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  8320. [    2.506357] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  8321. [    2.517111] scsi host0: ahci-ceva
  8322. [    2.520531] scsi host1: ahci-ceva
  8323. [    2.523871] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
  8324. [    2.531703] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
  8325. [    2.539756] mtdoops: mtd device (mtddev=name/number) must be supplied
  8326. [    2.547102] zynqmp-qspi ff0f0000.spi: rx bus width not found
  8327. [    2.553040] m25p80 spi0.0: found n25q00, expected n25q512a
  8328. [    2.558767] m25p80 spi0.0: n25q00 (131072 Kbytes)
  8329. [    2.563407] 5 ofpart partitions found on MTD device spi0.0
  8330. [    2.568853] Creating 5 MTD partitions on "spi0.0":
  8331. [    2.573629] 0x000000000000-0x000000500000 : "boot"
  8332. [    2.578892] 0x000000500000-0x000000540000 : "bootenv"
  8333. [    2.584292] 0x000000540000-0x000002740000 : "kernel"
  8334. [    2.589594] 0x000002740000-0x000003740000 : "user"
  8335. [    2.594730] 0x000003740000-0x000003750000 : "test"
  8336. [    2.600711] libphy: Fixed MDIO Bus: probed
  8337. [    2.605814] tun: Universal TUN/TAP device driver, 1.6
  8338. [    2.610780] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  8339. [    2.617070] CAN device driver interface
  8340. [    2.621387] macb ff0c0000.ethernet: Not enabling partial store and forward
  8341. [    2.628692] libphy: MACB_mii_bus: probed
  8342. [    2.706944] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
  8343. [    2.716688] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
  8344. [    2.729289] usbcore: registered new interface driver asix
  8345. [    2.734652] usbcore: registered new interface driver ax88179_178a
  8346. [    2.740696] usbcore: registered new interface driver cdc_ether
  8347. [    2.746516] usbcore: registered new interface driver net1080
  8348. [    2.752154] usbcore: registered new interface driver cdc_subset
  8349. [    2.758058] usbcore: registered new interface driver zaurus
  8350. [    2.763624] usbcore: registered new interface driver cdc_ncm
  8351. [    2.769583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  8352. [    2.776029] ehci-pci: EHCI PCI platform driver
  8353. [    2.780680] usbcore: registered new interface driver uas
  8354. [    2.785942] usbcore: registered new interface driver usb-storage
  8355. [    2.792184] mousedev: PS/2 mouse device common for all mice
  8356. [    2.798067] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  8357. [    2.805234] i2c /dev entries driver
  8358. [    2.808865] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
  8359. [    2.814921] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
  8360. [    2.821704] usbcore: registered new interface driver uvcvideo
  8361. [    2.827362] USB Video Class driver (1.1.1)
  8362. [    2.831796] Bluetooth: HCI UART driver ver 2.3
  8363. [    2.836157] Bluetooth: HCI UART protocol H4 registered
  8364. [    2.841273] Bluetooth: HCI UART protocol BCSP registered
  8365. [    2.846568] Bluetooth: HCI UART protocol LL registered
  8366. [    2.851689] Bluetooth: HCI UART protocol ATH3K registered
  8367. [    2.852893] ata2: SATA link down (SStatus 0 SControl 330)
  8368. [    2.852933] ata1: SATA link down (SStatus 0 SControl 330)
  8369. [    2.867833] Bluetooth: HCI UART protocol Three-wire (H5) registered
  8370. [    2.874121] Bluetooth: HCI UART protocol Intel registered
  8371. [    2.879500] Bluetooth: HCI UART protocol Broadcom registered
  8372. [    2.885108] Bluetooth: HCI UART protocol QCA registered
  8373. [    2.890348] usbcore: registered new interface driver bcm203x
  8374. [    2.895987] usbcore: registered new interface driver bpa10x
  8375. [    2.901545] usbcore: registered new interface driver bfusb
  8376. [    2.907012] usbcore: registered new interface driver btusb
  8377. [    2.912450] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  8378. [    2.918142] usbcore: registered new interface driver ath3k
  8379. [    2.923681] EDAC MC: ECC not enabled
  8380. [    2.927306] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  8381. [    2.936333] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  8382. [    2.948617] sdhci: Secure Digital Host Controller Interface driver
  8383. [    2.954712] sdhci: Copyright(c) Pierre Ossman
  8384. [    2.959051] sdhci-pltfm: SDHCI platform and OF driver helper
  8385. [    3.010682] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
  8386. [    3.018793] ledtrig-cpu: registered to indicate activity on CPUs
  8387. [    3.024836] usbcore: registered new interface driver usbhid
  8388. [    3.030325] usbhid: USB HID core driver
  8389. [    3.035721] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  8390. [    3.042589] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  8391. [    3.049752] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  8392. [    3.057104] PLL: shutdown
  8393. [    3.060535] Write failed to divider address:fd1a007c
  8394. [    3.065567] PLL: enable
  8395. [    3.068091] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  8396. [    3.076128] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  8397. [    3.085802] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
  8398. [    3.095638] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
  8399. [    3.103058] pktgen: Packet Generator for packet performance testing. Version: 2.75
  8400. [    3.111246] Netfilter messages via NETLINK v0.30.
  8401. [    3.115993] ip_tables: (C) 2000-2006 Netfilter Core Team
  8402. [    3.121272] Initializing XFRM netlink socket
  8403. [    3.125601] NET: Registered protocol family 10
  8404. [    3.131438] ip6_tables: (C) 2000-2006 Netfilter Core Team
  8405. [    3.136792] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  8406. [    3.143015] NET: Registered protocol family 17
  8407. [    3.147385] NET: Registered protocol family 15
  8408. [    3.151812] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  8409. [    3.164735] Ebtables v2.0 registered
  8410. [    3.168345] can: controller area network core (rev 20120528 abi 9)
  8411. [    3.174489] NET: Registered protocol family 29
  8412. [    3.178885] can: raw protocol (rev 20120528)
  8413. [    3.185144] can: broadcast manager protocol (rev 20161123 t)
  8414. [    3.192724] can: netlink gateway (rev 20130117) max_hops=1
  8415. [    3.198174] Bluetooth: RFCOMM TTY layer initialized
  8416. [    3.204994] Bluetooth: RFCOMM socket layer initialized
  8417. [    3.212066] Bluetooth: RFCOMM ver 1.11
  8418. [    3.215745] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  8419. [    3.221024] Bluetooth: BNEP filters: protocol multicast
  8420. [    3.226236] Bluetooth: BNEP socket layer initialized
  8421. [    3.231180] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  8422. [    3.237086] Bluetooth: HIDP socket layer initialized
  8423. [    3.242204] 9pnet: Installing 9P2000 support
  8424. [    3.246407] Key type dns_resolver registered
  8425. [    3.253039] registered taskstats version 1
  8426. [    3.259461] Btrfs loaded, crc32c=crc32c-generic
  8427. [    3.272413] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  8428. [    3.277836] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  8429. [    3.285704] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
  8430. [    3.294362] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
  8431. [    3.300429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  8432. [    3.307134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  8433. [    3.314337] usb usb1: Product: xHCI Host Controller
  8434. [    3.319199] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
  8435. [    3.324491] usb usb1: SerialNumber: xhci-hcd.0.auto
  8436. [    3.329655] hub 1-0:1.0: USB hub found
  8437. [    3.333339] hub 1-0:1.0: 1 port detected
  8438. [    3.337345] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  8439. [    3.342751] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  8440. [    3.350424] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  8441. [    3.358520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  8442. [    3.365227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  8443. [    3.372430] usb usb2: Product: xHCI Host Controller
  8444. [    3.377290] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
  8445. [    3.382585] usb usb2: SerialNumber: xhci-hcd.0.auto
  8446. [    3.387659] hub 2-0:1.0: USB hub found
  8447. [    3.391344] hub 2-0:1.0: 1 port detected
  8448. [    3.395616] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 08:54:51 UTC (1532595291)
  8449. [    3.404510] clk: Not disabling unused clocks
  8450. [    3.408698] ALSA device list:
  8451. [    3.411646]   #0: DisplayPort monitor
  8452. [    3.415913] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
  8453. INIT: version 2.88 booting
  8454. Starting udev
  8455. [    3.528970] udevd[1612]: starting version 3.2
  8456. [    3.533636] random: udevd: uninitialized urandom read (16 bytes read)
  8457. [    3.540068] random: udevd: uninitialized urandom read (16 bytes read)
  8458. [    3.546484] random: udevd: uninitialized urandom read (16 bytes read)
  8459. [    3.552878] random: udevd: uninitialized urandom read (16 bytes read)
  8460. [    3.562918] udevd[1613]: starting eudev-3.2
  8461. [    3.601142] random: udevd: uninitialized urandom read (16 bytes read)
  8462. [    3.607572] random: udevd: uninitialized urandom read (16 bytes read)
  8463. [    3.622422] random: udevd: uninitialized urandom read (16 bytes read)
  8464. [    3.632422] random: udevd: uninitialized urandom read (16 bytes read)
  8465. [    3.643679] 4fm: loading out-of-tree module taints kernel.
  8466. [    3.656680] <dma1> init: registered
  8467. [    3.656792] pci 0000:00:00.0: enabling device (0000 -> 0002)
  8468. [    3.656804] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
  8469. [    3.656814] Accessing 47232 of total 1 entries in dev->bar
  8470. [    3.656833] dev->bar[u].virt_address:cf3d07c value:38011121
  8471. [    3.656835] dev->bar[u].virt_address:cf3d080 value:deadbeef
  8472. [    3.656838] dev->bar[u].virt_address:cf3d084 value:baadf00d
  8473. [    3.656840] dev->bar[u].virt_address:cf3d088 value:eba00eba
  8474. [    3.656843] dev->bar[u].virt_address:cf3d08c value:beefdeaf
  8475. [    3.658217] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
  8476. [    3.770158] <dma2> init: registered
  8477. Populating dev cache
  8478. [    4.166148] random: dd: uninitialized urandom read (512 bytes read)
  8479. Starting internet superserver: inetd.
  8480. Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
  8481. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
  8482. INIT: Entering runlevel: 5
  8483. Hello World
  8484. [22]:0x12
  8485. [20]:0x201
  8486. [20]:0x201
  8487. [22]:0x1
  8488. [0]:0x140
  8489. [0]:0x140
  8490. Configuring network interfaces... [    4.457306] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  8491. done.
  8492. Starting Dropbear SSH server: [    4.486074] random: dropbearkey: uninitialized urandom read (32 bytes read)
  8493. Generating key, this may take a while...
  8494. [    5.490792] macb ff0c0000.ethernet eth0: link up (1000/Full)
  8495. [    5.496394] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  8496. Public key portion is:
  8497. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCCljqy7I1N8nZDWucdAuaz0OwX18gwxE9P2Ml5vj8PkJNKm1WC8jUrHpWPGU7Xdo9k2vILRGCtTLCMdYMcVo9nab1LIY72KIeLy4R6RJexXBywKT7xmaY3w9yLjg2y5KNjDSXF6eOM3TTlBjoCZyWCo5GiFt5xudx0xaehgfPnXF2sG6WkPMWxANDb7xrLssQm347YAvyFIzDwBqphQawlRZYidx2D3NiFulWAyfPDf8BMEFjkQunxjTadc3r55wiEfMsPFUkxy14Xr1BePYvkNwdISfwsQEaIf2WjDrz6O430O+8jJ8cO8szSU9hf4oEwYmrBi3cQUJNS66E8DPpp root@VP88x_2017_3_PRJ0191
  8498. Fingerprint: md5 39:6b:57:9b:40:2f:d1:83:73:5a:0b:bd:4a:63:77:8e
  8499. dr[    6.148053] random: fast init done
  8500. opbear.
  8501. Starting syslogd/klogd: done
  8502. [    6.586357] random: crng init done
  8503. [    8.321598] jffs2: notice: (2070) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  8504. hello world.....
  8505. Starting tcf-agent: OK
  8506.  
  8507. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
  8508. UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
  8509.  
  8510. Global Units:
  8511. Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
  8512. Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
  8513. Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
  8514. Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
  8515. Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
  8516. Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
  8517.  
  8518.  
  8519. Running 'VP880-FMC134' on PCIe, CID725
  8520.  
  8521. -----------------------------------------------------------
  8522. Device 'VP880' (P0)
  8523. -----------------------------------------------------------
  8524. Constellation ID   : 759
  8525. Number Of Stars    : 19
  8526. Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
  8527. Firmware Build Code: 0
  8528. Firmware Revision  : 1.2
  8529. -----------------------------------------------------------
  8530.  
  8531.     - Unit 0 is VP88x host interface star
  8532.  
  8533. -------- Onboard Monitoring (ADC Monitor) ---------
  8534. Temp (       AD7291  ) : OK    (53.25C)
  8535. Vin0 ( ADC0   1.1Va  ) : OK    ( 1.13V)
  8536. Vin1 ( ADC0 1.1Vdig  ) : OK    ( 1.12V)
  8537. Vin2 ( ADC0   1.9Va  ) : OK    ( 1.92V)
  8538. Vin3 ( ADC1   1.1Va  ) : OK    ( 1.14V)
  8539. Vin4 ( ADC1 1.1Vdig  ) : OK    ( 1.13V)
  8540. Vin5 ( ADC1   1.9Va  ) : OK    ( 1.92V)
  8541.  
  8542. Vin6 ( ADC0     raw  ) : OK    (0.684V)
  8543. Vin6 ( ADC0    Temp  ) : OK    (66.12C)
  8544.  
  8545. Vin7 ( ADC1     raw  ) : OK    (0.684V)
  8546. Vin7 ( ADC1    Temp  ) : OK    (66.12C)
  8547. ---------------------------------------------------
  8548.  
  8549.  
  8550. -------- Onboard Monitoring (Voltage Monitor) ---------
  8551. Temp (   AD7291  ) : OK    (52.50C)
  8552. Vin0 (  5.5Vosc  ) : OK    ( 5.50V)
  8553. Vin1 (  3.3Vclk  ) : OK    ( 3.25V)
  8554. Vin2 (  3.3Vlmx  ) : OK    ( 3.30V)
  8555. Vin3 ( 1.8Vcpld  ) : OK    ( 1.80V)
  8556. Vin4 (     Vadj  ) : OK    ( 1.82V)
  8557. Vin5 (  3.3Vfmc  ) : OK    ( 3.25V)
  8558. Vin6 ( 12.0Vfmc  ) : OK    (11.97V)
  8559. Vin7 (     Viob  ) : OK    ( 1.81V)
  8560. -------------------------------------------------------
  8561.  
  8562. Configuring clock tree ...
  8563.  
  8564.  
  8565.  Setting Clock_Mode
  8566. Internal Reference Mode
  8567. ^C
  8568. root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1^C
  8569. root@VP88x_2017_3_PRJ0191:~# lspci -vvv
  8570. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  8571.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  8572.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  8573.         Latency: 0
  8574.         Interrupt: pin A routed to IRQ 255
  8575.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  8576.         I/O behind bridge: 00000000-00000fff
  8577.         Memory behind bridge: e0000000-e00fffff
  8578.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  8579.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  8580.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  8581.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  8582.         Capabilities: [40] Power Management version 3
  8583.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  8584.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  8585.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  8586.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  8587.                         ExtTag- RBE+
  8588.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  8589.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  8590.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  8591.                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  8592.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  8593.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  8594.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  8595.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  8596.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
  8597.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  8598.                 RootCap: CRSVisible+
  8599.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  8600.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  8601.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  8602.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  8603.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  8604.                          Compliance De-emphasis: -6dB
  8605.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  8606.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  8607.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  8608.         Capabilities: [10c v1] Virtual Channel
  8609.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  8610.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  8611.                 Ctrl:   ArbSelect=Fixed
  8612.                 Status: InProgress-
  8613.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  8614.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  8615.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  8616.                         Status: NegoPending- InProgress-
  8617.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  8618.  
  8619. 01:00.0 Communication controller: Xilinx Corporation Device b880
  8620.         Subsystem: Xilinx Corporation Device b880
  8621.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  8622.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  8623.         Latency: 0
  8624.         Interrupt: pin A routed to IRQ 231
  8625.         Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
  8626.         Capabilities: [80] Power Management version 3
  8627.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  8628.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  8629.         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
  8630.                 Address: 0000000000000000  Data: 0000
  8631.         Capabilities: [c0] Express (v2) Endpoint, MSI 00
  8632.                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  8633.                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
  8634.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  8635.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  8636.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  8637.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  8638.                 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  8639.                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
  8640.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  8641.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  8642.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  8643.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
  8644.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  8645.                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
  8646.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  8647.                          Compliance De-emphasis: -6dB
  8648.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  8649.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  8650.         Capabilities: [100 v2] Advanced Error Reporting
  8651.                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  8652.                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  8653.                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  8654.                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  8655.                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  8656.                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  8657.         Capabilities: [300 v1] #19
  8658.         Kernel driver in use: 4FM
  8659.         Kernel modules: 4fm
  8660.  
  8661. root@VP88x_2017_3_PRJ0191:~# ^C
  8662. root@VP88x_2017_3_PRJ0191:~# lspci -vvv
  8663. 00:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
  8664.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  8665.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  8666.         Latency: 0
  8667.         Interrupt: pin A routed to IRQ 255
  8668.         Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
  8669.         I/O behind bridge: 00000000-00000fff
  8670.         Memory behind bridge: e0000000-e00fffff
  8671.         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  8672.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  8673.         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  8674.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  8675.         Capabilities: [40] Power Management version 3
  8676.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  8677.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  8678.         Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
  8679.                 DevCap: MaxPayload 256 bytes, PhantFunc 0
  8680.                         ExtTag- RBE+
  8681.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  8682.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  8683.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  8684.                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
  8685.                 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  8686.                         ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  8687.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  8688.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  8689.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
  8690.                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
  8691.                 RootCap: CRSVisible+
  8692.                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  8693.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
  8694.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  8695.                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
  8696.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  8697.                          Compliance De-emphasis: -6dB
  8698.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  8699.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  8700.         Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
  8701.         Capabilities: [10c v1] Virtual Channel
  8702.                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
  8703.                 Arb:    Fixed- WRR32- WRR64- WRR128-
  8704.                 Ctrl:   ArbSelect=Fixed
  8705.                 Status: InProgress-
  8706.                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  8707.                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  8708.                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  8709.                         Status: NegoPending- InProgress-
  8710.         Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
  8711.  
  8712. 01:00.0 Communication controller: Xilinx Corporation Device b880
  8713.         Subsystem: Xilinx Corporation Device b880
  8714.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  8715.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  8716.         Latency: 0
  8717.         Interrupt: pin A routed to IRQ 231
  8718.         Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
  8719.         Capabilities: [80] Power Management version 3
  8720.                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  8721.                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  8722.         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
  8723.                 Address: 0000000000000000  Data: 0000
  8724.         Capabilities: [c0] Express (v2) Endpoint, MSI 00
  8725.                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  8726.                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
  8727.                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  8728.                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  8729.                         MaxPayload 128 bytes, MaxReadReq 512 bytes
  8730.                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  8731.                 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
  8732.                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
  8733.                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
  8734.                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  8735.                 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  8736.                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
  8737.                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  8738.                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
  8739.                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  8740.                          Compliance De-emphasis: -6dB
  8741.                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
  8742.                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  8743.         Capabilities: [100 v2] Advanced Error Reporting
  8744.                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  8745.                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  8746.                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  8747.                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  8748.                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  8749.                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  8750.         Capabilities: [300 v1] #19
  8751.         Kernel driver in use: 4FM
  8752.         Kernel modules: 4fm
  8753.  
  8754. root@VP88x_2017_3_PRJ0191:~#
RAW Paste Data