API tools faq
paste
Advertisement
Guest User

Recovery boot

a guest
Mar 4th, 2021
86
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 73.05 KB | None | 0 0
raw download clone embed print report
  1. 1 Storage Device(s) found
  2. reading factory_update_param.ubt
  3.  
  4. ** Unable to read "factory_update_param.ubt" from usb 0:1 **
  5. reading recovery.img
  6.  
  7. ** Unable to read "recovery.img" from usb 0:1 **
  8. board_usb_stop cfg: 0
  9. (Re)start USB(1)...
  10. USB: dwc_usb driver version: 2.94 6-June-2012
  11. USB (0) peri reg base: c1108800
  12. USB (0) use clock source: XTAL input
  13. USB (0) base addr: 0xc9040000
  14. Force id mode: Host
  15. dwc_otg: No USB device found !
  16. Error, couldn't init Lowlevel part
  17. ## ANDROID Format IMAGE
  18. ## Booting kernel from Legacy Image at 12000000 ...
  19. Image Name: 53de8ee(20150701.173038)
  20. Image Type: ARM Linux Kernel Image (lzo compressed)
  21. Data Size: 6255533 Bytes = 6 MiB
  22. Load Address: 00208000
  23. Entry Point: 00208000
  24. Verifying Checksum ... OK
  25. Ramdisk start addr = 0x125f8000, len = 0x1fac06
  26. Multi dtb tool version: v2 .
  27. Multi dtb detected, support 22 dtbs.
  28. aml_dt soc: stvm8 platform: normal variant: 1g
  29. dtb 0 soc: stvm8 plat: dongle vari: 1g
  30. dtb 1 soc: stvm8 plat: dongle vari: 1ga
  31. dtb 2 soc: stvm8 plat: dragon vari: 2g
  32. dtb 3 soc: stvm8 plat: hdmiin vari: 1g
  33. dtb 4 soc: stvm8 plat: hdmiin vari: 1gnopmu
  34. dtb 5 soc: stvm8m2 plat: hdmiin vari: 1gpmu
  35. dtb 6 soc: stvm8m2 plat: hdmiin vari: 2g
  36. dtb 7 soc: stvm8 plat: hdmiin vari: 2gnopmu
  37. dtb 8 soc: stvm8m2 plat: hdmiin vari: 2gpmu
  38. dtb 9 soc: stvm8m2 plat: normal vari: 1g
  39. dtb 10 soc: stvm8 plat: normal vari: 1gops
  40. dtb 11 soc: stvm8 plat: normal vari: 2ga
  41. dtb 12 soc: stvm8m2 plat: hdmiin vari: 1g
  42. dtb 13 soc: stvm8 plat: hdmiin vari: 2g
  43. dtb 14 soc: stvm8 plat: normal vari: 1g
  44. dtb 15 soc: stvm8 plat: normal vari: 1ga
  45. dtb 16 soc: stvm8 plat: normal vari: 2g
  46. dtb 17 soc: stvm8 plat: tongfang vari: 2g
  47. dtb 18 soc: stvm8m2 plat: normal vari: 1gpmu
  48. dtb 19 soc: stvm8m2 plat: normal vari: 2g
  49. dtb 20 soc: stvm8m2 plat: normal vari: 2gpmu
  50. dtb 21 soc: stvm8m2 plat: tongfang vari: 2gpmu
  51. Find match dtb: 14
  52. Flat device tree start addr = 0x12844000, len = 0x56d3 magic=0xedfe0dd0
  53. Uncompressing Kernel Image ... OK
  54. uboot time: 31973037 us.
  55. EFUSE machid is not set.
  56. Using machid 0xf81 from environment
  57. From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5204001
  58. Loading Ramdisk to 05009000, end 05203c06 ... OK
  59. Loading Device Tree to 05000000, end 050086d2 ... OK
  60.  
  61. Starting kernel ...
  62.  
  63. [ 0.000000@0] Booting Linux on physical CPU 0x200
  64. [ 0.000000@0] Initializing cgroup subsys cpu
  65. [ 0.000000@0] Initializing cgroup subsys cpuacct
  66. [ 0.000000@0] Linux version 3.10.33-g53de8ee (jp@ubt124) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linaro GCC 2013.02) ) 53de8ee(20150701.173038)
  67. [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  68. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  69. [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
  70. [ 0.000000@0] physical memory start address is 0x200000
  71. [ 0.000000@0] reserved_end is 7ffffff
  72. [ 0.000000@0]
  73. [ 0.000000@0] Total memory is 1022 MiB
  74. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x07ffffff, size: 32 MiB
  75. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  76. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  77. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  78. [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB)
  79. [ 0.000000@0] vdec0(high) : 0x37f00000 - 0x3bf00000 ( 64 MiB)
  80. [ 0.000000@0] ppmgr0(high) : 0x36f00000 - 0x37f00000 ( 16 MiB)
  81. [ 0.000000@0] amvideocap0(low) : 0x07a00000 - 0x08000000 ( 6 MiB)
  82. [ 0.000000@0] get storage device: storage 2
  83. [ 0.000000@0] value=2
  84. [ 0.000000@0] get_storage_device : get storage device: storage 2
  85. [ 0.000000@0] get_storage_device : value=2
  86. [ 0.000000@0] [get_storage_device] storage_flag=2
  87. [ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
  88. [ 0.000000@0] cma: Found region@1, memory base 0, size 192 MiB
  89. [ 0.000000@0] cma: CMA: reserved 192 MiB at 23000000
  90. [ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
  91. [ 0.000000@0] cma: CMA: reserved 20 MiB at 21c00000
  92. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  93. [ 0.000000@0] Meson chip version = RevC (19:C - 0:27ED)
  94. [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c14e8000 s8960 r8192 d15616 u32768
  95. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211216
  96. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xa007 logo=osd1,loaded,0x15100000,480cvbs,full hdmimode=1080p cvbsmode=480cvbs androidboot.firstboot=0 a9_clk_max=1608000000 mac=xx:xx:xx:xx:xx:xx verhw=0x80000 hdmitx=cec0
  97. [ 0.000000@0] cvbs performance line = 0
  98. [ 0.000000@0] cvbs trimming line = 0xa007
  99. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x7
  100. [ 0.000000@0] osd1:1
  101. [ 0.000000@0] loaded:268435459
  102. [ 0.000000@0] logo has been loaded
  103. [ 0.000000@0] 480cvbs:2
  104. [ 0.000000@0] full:2
  105. [ 0.000000@0] kernel get hdmimode form uboot is 1080p
  106. [ 0.000000@0] kernel get cvbsmode form uboot is 480cvbs
  107. [ 0.000000@0] ******** uboot setup mac-addr ethernet: ac:db:da:3c:fc:b8
  108. [ 0.000000@0] >>>>>>>>>>>>>>>>>>>> wifi driver = usb
  109. [ 0.000000@0] >>>>>>>>>>>>>>>>>>>> main hw version = BOARD_NORMAL
  110. [ 0.000000@0] >>>>>>>>>>>>>>>>>>>> emmc flash used high frequency
  111. [ 0.000000@0] hdmitx: cec: Function List: disable, , ,
  112. [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0x0
  113. [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x0
  114. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  115. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  116. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  117. [ 0.000000@0] Memory: 64MB 16MB 751MB = 831MB total
  118. [ 0.000000@0] Memory: 600808k/600808k available, 250136k reserved, 119808K highmem
  119. [ 0.000000@0] Virtual kernel memory layout:
  120. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  121. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  122. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  123. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  124. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  125. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  126. [ 0.000000@0] .text : 0xc0008000 - 0xc0a71280 (10661 kB)
  127. [ 0.000000@0] .init : 0xc0a72000 - 0xc0aac300 ( 233 kB)
  128. [ 0.000000@0] .data : 0xc0aae000 - 0xc0b490c0 ( 621 kB)
  129. [ 0.000000@0] .bss : 0xc0b490c0 - 0xc0df9894 (2754 kB)
  130. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  131. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  132. [ 0.000000@0] NR_IRQS:256
  133. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  134. [ 0.000000@0] Switching to timer-based delay loop
  135. [ 0.000000@0] console [ttyS0] enabled
  136. [ 0.413843@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  137. [ 0.424140@0] pid_max: default: 32768 minimum: 301
  138. [ 0.429011@0] Security Framework initialized
  139. [ 0.433184@0] SELinux: Initializing.
  140. [ 0.436891@0] Mount-cache hash table entries: 512
  141. [ 0.444861@0] Initializing cgroup subsys debug
  142. [ 0.445899@0] Initializing cgroup subsys freezer
  143. [ 0.450565@0] CPU: Testing write buffer coherency: ok
  144. [ 0.455839@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  145. [ 0.461391@0] Setting up static identity map for 0xc073d0c8 - 0xc073d120
  146. [ 0.468094@0] L310 cache controller enabled
  147. [ 0.472196@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B
  148. [ 0.479701@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000
  149. [ 0.487855@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  150. [ 0.570148@0] write pen_release: 1
  151. [ 0.570322@1] CPU1: Booted secondary processor
  152. [ 0.570336@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  153. [ 0.590141@0] write pen_release: 2
  154. [ 0.598281@2] CPU2: Booted secondary processor
  155. [ 0.598294@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  156. [ 0.610140@0] write pen_release: 3
  157. [ 0.618278@3] CPU3: Booted secondary processor
  158. [ 0.618292@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  159. [ 0.618361@0] Brought up 4 CPUs
  160. [ 0.631492@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  161. [ 0.637720@0] CPU: All CPU(s) started in SVC mode.
  162. [ 0.642992@0] devtmpfs: initialized
  163. [ 0.650571@0] clkrate [ xtal ] : 24000000
  164. [ 0.650599@0] clkrate [ pll_sys ] : 1200000000
  165. [ 0.654538@0] clkrate [ pll_fixed ] : 2550000000
  166. [ 0.659219@0] clkrate [ pll_vid ] : 648000000
  167. [ 0.663647@0] TODO: clk_get_rate_hpll() is not implement in M8 now
  168. [ 0.669793@0] clkrate [ pll_hpll ] : 0
  169. [ 0.673613@0] clkrate [ pll_ddr ] : 0
  170. [ 0.677336@0] clkrate [ a9_clk ] : 1200000000
  171. [ 0.681762@0] clkrate [ clk81 ] : 141666666
  172. [ 0.686273@0] pinctrl core: initialized pinctrl subsystem
  173. [ 0.691550@0] regulator-dummy: no parameters
  174. [ 0.701054@0] NET: Registered protocol family 16
  175. [ 0.707121@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  176. [ 0.709625@0] VPU driver version: v03
  177. [ 0.712278@0] vpu driver detect cpu type: m8
  178. [ 0.716504@0] load vpu_clk in dts: 364300000Hz(7)
  179. [ 0.721202@0] vpu_probe OK
  180. [ 0.724006@0] cma: Assigned CMA region with name cma_4k2k to vdec.0 device
  181. [ 0.730838@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
  182. [ 0.739470@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  183. [ 0.743569@0] register lm device lm-root
  184. [ 0.747304@0] register lm device lm1
  185. [ 0.750867@0] register lm device lm0
  186. [ 0.754501@0] Init pinux probe!
  187. [ 0.757984@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
  188. [ 0.763251@0] tv_init_module
  189. [ 0.766090@0] major number 349 for disp
  190.  
  191.  
  192. [ 0.769985@0] vout_register_server
  193. [ 0.773374@0] register tv module server ok
  194.  
  195.  
  196. [ 0.777634@0] major number 0 for disp
  197.  
  198.  
  199. [ 0.781348@0] register tv module server ok
  200.  
  201.  
  202. [ 0.785627@0] aml_i2c version: 20140813
  203. [ 0.789519@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(e17510a8)
  204. [ 0.795921@0] aml-i2c i2c-AO: aml i2c bus driver.
  205. [ 0.800249@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(e17514a8)
  206. [ 0.806134@0] aml-i2c i2c-A: aml i2c bus driver.
  207. [ 0.810841@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(e17518a8)
  208. [ 0.816709@0] aml-i2c i2c-B: aml i2c bus driver.
  209. [ 0.821402@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(e1751ca8)
  210. [ 0.827284@0] aml-i2c i2c-C: aml i2c bus driver.
  211. [ 0.831947@0] aml_pmu_init, 454
  212. [ 0.835026@0] call aml_dvfs_init in
  213. [ 0.838626@0] hdmitx: system: amhdmitx_init
  214. [ 0.842635@0] hdmitx: system: Ver: 2014May6
  215. [ 0.846837@0] hdmitx: system: amhdmitx_probe
  216. [ 0.851194@0] hdmitx: system: not find cec config
  217. [ 0.855714@0] hdmitx: system: not find vend_init_data
  218. [ 0.860840@0] hdmitx: system: gate/pwr cmd: 1
  219. [ 0.865079@0] hdmitx: system: hw init
  220. [ 0.869168@1] hdmitx: system: reset intr mask
  221. [ 0.897056@0] bio: create slab <bio-0> at 0
  222. [ 0.897460@0] SCSI subsystem initialized
  223. [ 0.899605@0] usbcore: registered new interface driver usbfs
  224. [ 0.905179@0] usbcore: registered new interface driver hub
  225. [ 0.910652@0] usbcore: registered new device driver usb
  226. [ 0.915840@0] Linux video capture interface: v2.00
  227. [ 0.920599@0] pps_core: LinuxPPS API ver. 1 registered
  228. [ 0.925678@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  229. [ 0.934968@0] PTP clock support registered
  230. [ 0.939251@0] TV mode 480cvbs selected.
  231. [ 0.942851@0] already display in uboot
  232. [ 0.946569@0] osd1 cur_mode = 2, mode = 2
  233. [ 0.952447@0] call aml_pmu_probe_init in
  234. [ 0.954499@0] aml_pmus_probe, child name:rn5t618
  235. [ 0.959052@0] aml_pmus_probe, i2c_bus:i2c_bus_ao
  236. [ 0.963926@0] [RICOH]setup_supply_data, failed to get property: board_battery
  237. [ 0.971629@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu
  238. [ 0.979530@0] Advanced Linux Sound Architecture Driver Initialized.
  239. [ 0.985866@0] Bluetooth: Core ver 2.16
  240. [ 0.989330@0] NET: Registered protocol family 31
  241. [ 0.993909@0] Bluetooth: HCI device and connection manager initialized
  242. [ 1.000410@0] Bluetooth: HCI socket layer initialized
  243. [ 1.005438@0] Bluetooth: L2CAP socket layer initialized
  244. [ 1.010646@0] Bluetooth: SCO socket layer initialized
  245. [ 1.015793@0] cfg80211: Calling CRDA to update world regulatory domain
  246. [ 1.023268@0] Switching to clocksource Timer-E
  247. [ 1.027444@0] NET: Registered protocol family 2
  248. [ 1.031428@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  249. [ 1.038386@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  250. [ 1.044956@0] TCP: Hash tables configured (established 8192 bind 8192)
  251. [ 1.051408@0] TCP: reno registered
  252. [ 1.054761@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  253. [ 1.060845@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  254. [ 1.067469@0] NET: Registered protocol family 1
  255. [ 1.071896@0] wifi_dev_probe
  256. [ 1.074687@0] wifi_dt : interrupt_pin=GPIOX_21
  257. [ 1.079123@0] wifi_dt : irq_num=null
  258. [ 1.082660@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  259. [ 1.087792@0] wifi_dt : power_on_pin=GPIOAO_6
  260. [ 1.092110@0] wifi_dt : power_on_pin2=GPIOX_11
  261. [ 1.096534@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6, power_on_pin2=123, power_on_pin3=0, clock_32k_pin=122
  262. [ 1.108684@0] Unpacking initramfs...
  263. [ 1.187812@0] Freeing initrd memory: 2024K (c4e09000 - c5003000)
  264. [ 1.189325@0] audit: initializing netlink socket (disabled)
  265. [ 1.193753@0] type=2000 audit(1.080:1): initialized
  266. [ 1.199015@0] bounce pool size: 64 pages
  267. [ 1.205331@0] VFS: Disk quotas dquot_6.5.2
  268. [ 1.206717@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  269. [ 1.214694@0] NTFS driver 2.1.30 [Flags: R/O].
  270. [ 1.217883@0] fuse init (API version 7.22)
  271. [ 1.222087@0] msgmni has been set to 1383
  272. [ 1.226820@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 343)
  273. [ 1.233257@0] io scheduler noop registered
  274. [ 1.237357@0] io scheduler deadline registered
  275. [ 1.241840@0] io scheduler cfq registered (default)
  276. [ 1.248736@0] loop: module loaded
  277. [ 1.250246@0] tun: Universal TUN/TAP device driver, 1.6
  278. [ 1.255112@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  279. [ 1.261776@0] PPP generic driver version 2.4.2
  280. [ 1.265938@0] PPP BSD Compression module registered
  281. [ 1.270740@0] PPP Deflate Compression module registered
  282. [ 1.275907@0] PPP MPPE Compression module registered
  283. [ 1.280855@0] NET: Registered protocol family 24
  284. [ 1.285495@0] usbcore: registered new interface driver asix
  285. [ 1.291063@0] usbcore: registered new interface driver ax88179_178a
  286. [ 1.297261@0] usbcore: registered new interface driver cdc_ether
  287. [ 1.303238@0] usbcore: registered new interface driver dm9601
  288. [ 1.308961@0] usbcore: registered new interface driver net1080
  289. [ 1.314757@0] usbcore: registered new interface driver cdc_subset
  290. [ 1.320845@0] usbcore: registered new interface driver zaurus
  291. [ 1.326571@0] usbcore: registered new interface driver cdc_ncm
  292. [ 1.332366@0] usbcore: registered new interface driver qf9700
  293. [ 1.338094@0] usbcore: registered new interface driver sr9600
  294. [ 1.343908@0] usbcore: registered new interface driver cdc_acm
  295. [ 1.349594@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  296. [ 1.357785@0] usbcore: registered new interface driver usb-storage
  297. [ 1.363946@0] usbcore: registered new interface driver usbserial
  298. [ 1.369908@0] usbcore: registered new interface driver cp210x
  299. [ 1.375602@0] usbserial: USB Serial support registered for cp210x
  300. [ 1.381686@0] usbcore: registered new interface driver option
  301. [ 1.387410@0] usbserial: USB Serial support registered for GSM modem (1-port)
  302. [ 1.394504@0] usbcore: registered new interface driver pl2303
  303. [ 1.400230@0] usbserial: USB Serial support registered for pl2303
  304. [ 1.406477@0] mousedev: PS/2 mouse device common for all mice
  305. [ 1.412223@0] i2c /dev entries driver
  306. [ 1.415976@0] usbcore: registered new interface driver uvcvideo
  307. [ 1.421551@0] USB Video Class driver (1.1.1)
  308. [ 1.425954@0] device-mapper: uevent: version 1.0.3
  309. [ 1.430732@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  310. [ 1.439282@0] Bluetooth: HCI UART driver ver 2.2
  311. [ 1.443721@0] Bluetooth: HCI H4 protocol initialized
  312. [ 1.448869@0] hidraw: raw HID events driver (C) Jiri Kosina
  313. [ 1.454398@0] usbcore: registered new interface driver usbhid
  314. [ 1.459941@0] usbhid: USB HID core driver
  315. [ 1.464184@0] zram: Created 1 device(s) ...
  316. [ 1.468327@0] ashmem: initialized
  317. [ 1.471487@0] logger: created 256K log 'log_main'
  318. [ 1.476143@0] logger: created 256K log 'log_events'
  319. [ 1.481012@0] logger: created 256K log 'log_radio'
  320. [ 1.485763@0] logger: created 256K log 'log_system'
  321. [ 1.490704@0] vout_init_module
  322. [ 1.493597@0] start init vout module
  323.  
  324.  
  325. [ 1.497327@0] create vout attribute ok
  326.  
  327.  
  328. [ 1.501595@0] ge2d_init
  329. [ 1.503717@0] ge2d_dev major:339
  330.  
  331.  
  332. [ 1.507109@0] ge2d start monitor
  333.  
  334.  
  335. [ 1.510339@0] osd_init
  336. [ 1.510347@1] ge2d workqueue monitor start
  337.  
  338.  
  339. [ 1.516832@0] osd_probe, vinfo:c0782ae4
  340. [ 1.520794@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  341. [ 1.528769@0] osd_probe, mydef_var:c0aed734, vinfo:c0782ae4
  342. [ 1.534304@0] init fbdev bpp is :32
  343.  
  344.  
  345. [ 1.537873@0] ---------------clear framebuffer0 memory
  346.  
  347.  
  348. [ 1.553059@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0200000, size=1024K
  349. [ 1.555502@0] osd_probe, mydef_var:c0aed734, vinfo:c0782ae4
  350. [ 1.561059@0] don't find to display_size_default from mesonfb-dts
  351. [ 1.567125@0] init fbdev bpp is :16
  352.  
  353.  
  354. [ 1.586358@0] osd probe ok
  355.  
  356.  
  357. [ 1.586449@0] osd_ext_init
  358. [ 1.586673@0] vout2_init_module enter
  359. [ 1.590353@0] amlvideo-000: V4L2 device registered as video10
  360. [ 1.595897@0] ionvideo-000: V4L2 device registered as video13
  361. [ 1.601470@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
  362. [ 1.610149@0] aml_wdt_driver_init,301
  363. [ 1.613504@0] ** disable watchdog
  364. [ 1.616960@0] keys===========================================
  365. [ 1.622531@0] keys_devno=15000000
  366. [ 1.625894@0] securitykey: device aml_keys created
  367. [ 1.630616@0] amlkeys=0
  368. [ 1.633031@0] platform_driver_register--aml_keys_driver--------------------
  369. [ 1.640169@0] set uart_ao pinmux use pinctrl subsystem
  370. [ 1.645057@0] P_AO_RTI_PIN_MUX_REG:5860
  371. [ 1.648912@0] start uart_ao_ttyS0:(irq = 122)
  372. [ 1.653215@0] register uart_ao ok
  373. [ 1.656679@0] set uart_a pinmux use pinctrl subsystem
  374. [ 1.661526@0] P_AO_RTI_PIN_MUX_REG:5860
  375. [ 1.665350@0] start uart_a_ttyS1:(irq = 58)
  376. [ 1.669527@0] register uart_a ok
  377. [ 1.672859@0] set uart_b pinmux use pinctrl subsystem
  378. [ 1.677763@0] P_AO_RTI_PIN_MUX_REG:5860
  379. [ 1.681560@0] start uart_b_ttyS2:(irq = 107)
  380. [ 1.685798@0] register uart_b ok
  381. [ 1.689119@0] dwc_otg: version 3.10a 12-MAY-2014
  382. [ 1.693623@0] dwc_otg_driver_probe NOT match
  383. [ 1.697903@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  384. [ 1.706446@0] USB (1) use clock source: XTAL input
  385. [ 1.732278@0] Core Release: 3.10a
  386. [ 1.732303@0] Setting default values for core params
  387. [ 1.734899@0] curmode: 1, host_only: 1
  388. [ 1.758775@0] Using Buffer DMA mode
  389. [ 1.758800@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  390. [ 1.761131@0] Working on port type = HOST
  391. [ 1.765814@0] dwc_otg lm1: DWC OTG Controller
  392. [ 1.769507@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  393. [ 1.776155@0] dwc_otg lm1: irq 63, io mem 0x00000000
  394. [ 1.781093@0] -------hcd->flags.d32 = 0
  395. [ 1.784898@0] Init: Port Power? op_state=1
  396. [ 1.788986@0] Init1: Power Port (0)
  397. [ 1.792814@0] hub 1-0:1.0: USB hub found
  398. [ 1.796331@0] hub 1-0:1.0: 1 port detected
  399. [ 1.800609@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  400. [ 1.809024@0] USB (0) use clock source: XTAL input
  401. [ 1.834799@0] Core Release: 3.10a
  402. [ 1.834824@0] Setting default values for core params
  403. [ 1.837454@0] curmode: 1, host_only: 0
  404. [ 1.901233@0] Using Buffer DMA mode
  405. [ 1.901257@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  406. [ 1.903597@0] Working on port type = OTG
  407. [ 1.907511@0] Current port type: SLAVE
  408. [ 1.911342@0] dwc_otg lm0: DWC OTG Controller
  409. [ 1.915562@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  410. [ 1.922277@0] dwc_otg lm0: irq 62, io mem 0x00000000
  411. [ 1.927494@0] hub 2-0:1.0: USB hub found
  412. [ 1.931073@0] hub 2-0:1.0: 1 port detected
  413. [ 1.935263@0] Dedicated Tx FIFOs mode
  414. [ 1.939033@0] using timer detect id change, e19b5000
  415. [ 1.943754@0] gpio dev major number:335
  416.  
  417.  
  418. [ 1.947749@0] create gpio device success
  419. [ 1.951681@0] boot_device_flag : -1
  420. [ 1.955002@0] do not init nand
  421. [ 1.958039@1] HOST mode
  422. [ 1.958168@0] ethernet_driver probe!
  423. [ 1.958171@0] Please config phy interface.
  424. [ 1.958173@0] ethernet_probe phy_interface = 1
  425. [ 1.958175@0] Please config savepowermode.
  426. [ 1.958176@0] Please config reset_pin_enable.
  427. [ 1.958177@0] Please config reset_delay.
  428. [ 1.958179@0] Please config reset_pin.
  429. [ 1.958182@0] ethernetinit(dbg[c0af415c]=1)
  430. [ 1.958200@0] ethernet base addr is fe0c0000
  431. [ 1.958210@0] write mac add to:e17d4508: ac db da 3c fc b8 |...<..|
  432. [ 2.003325@1] Indeed it is in host mode hprt0 = 00021501
  433. [ 2.005379@0] libphy: AMLMAC MII Bus: probed
  434. [ 2.005383@0] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active
  435. [ 2.005772@0] Amlogic A/V streaming port init
  436. [ 2.023451@0] buffersize=262144,0,start=0
  437. [ 2.026901@0] Subtitle stbuf alloced at 0xe0e00000, size = 262144
  438. [ 2.032919@0] changed the (2) buffer size from 0 to 262144
  439. [ 2.038552@0] init vdec memsource 37f00000->3befffff
  440. [ 2.043392@0] [tsync_pcr_init]init success.
  441. [ 2.047603@0] amvideocap_init_module
  442. [ 2.051149@0] amvideocap_probe,amvideocap
  443. [ 2.055122@0] amvideocap_dev_register buf:07a00000,size:600000.
  444. [ 2.056614@2] -------hcd->flags.d32 = 0
  445. [ 2.056638@2] Init: Port Power? op_state=1
  446. [ 2.056640@2] Init1: Power Port (0)
  447. [ 2.056644@2] [RN5T618]rn5t618_otg_change, driver is not ready, do it later
  448. [ 2.056646@2] set usb port power on (board gpio 15)!
  449. [ 2.084464@0] regist mpeg12 codec profile
  450. [ 2.088315@0] regist mpeg4 codec profile
  451. [ 2.092122@0] amvdec_vc1 module init
  452. [ 2.095712@0] regist vc1 codec profile
  453. [ 2.099431@0] amvdec_h264 module init
  454. [ 2.103099@0] regist h264 codec profile
  455. [ 2.106894@0] amvdec_h264mvc module init
  456. [ 2.110795@0] regist hmvc codec profile
  457. [ 2.114573@0] amvdec_h264_4k2k module init
  458. [ 2.118706@0] regist h264_4k2k codec profile
  459. [ 2.122904@0] amvdec_h265 module init
  460. [ 2.126568@0] regist hevc_unsupport codec profile
  461. [ 2.131274@0] regist mjpeg codec profile
  462. [ 2.135116@0] amvdec_real module init
  463. [ 2.138833@0] amvdec_avs module init
  464. [ 2.142401@0] amvenc_avc memory resource undefined.
  465. [ 2.147193@0] encode_wq_init.
  466. [ 2.150114@0] encode start monitor.
  467. [ 2.153641@1] encode workqueue monitor start.
  468. [ 2.158083@0] jpegenc module init
  469. [ 2.161392@0] picdec buffer size is 2000000
  470. [ 2.165474@0] alloc_keep_buffer keep_y_addr e0a00000
  471. [ 2.170373@0] alloc_keep_buffer keep_u_addr e0f00000
  472. [ 2.175257@0] alloc_keep_buffer keep_v_addr e0e80000
  473. [ 2.180218@0] yaddr=e0a00000,u_addr=e0f00000,v_addr=e0e80000
  474. [ 2.186018@0] create_ge2d_work_queue video task ok
  475. [ 2.190932@0]
  476. [ 2.190932@0]
  477. [ 2.190932@0] VECM init
  478. [ 2.190932@0]
  479. [ 2.198348@0] ===============================alpum_init
  480. [ 2.203551@0] ===============================hw_version_init
  481. [ 2.206626@2] usb 1-1: new high-speed USB device number 2 using dwc_otg
  482. [ 2.215898@0] ======================= hw_version_probe
  483. [ 2.220973@2] Indeed it is in host mode hprt0 = 00001101
  484. [ 2.220998@0] hw_version : write_protect_pin=GPIOH_3
  485. [ 2.221003@0] write_protect_pin(32) : (null)
  486. [ 2.221013@0] write_protect_pin(32) : hw_version
  487. [ 2.221016@0] hw version write protect Enable! 32
  488. [ 2.244846@0] efuse===========================================
  489. [ 2.250607@0] efuse: device efuse created
  490. [ 2.254558@0] efuse--------------------------------------------
  491. [ 2.260399@0] SARADC Driver init.
  492. [ 2.263754@0] __saradc_probe__
  493. [ 2.416745@0] saradc calibration: ref_val = 510
  494. [ 2.416773@0] saradc calibration: ref_nominal = 512
  495. [ 2.420497@0] saradc calibration: coef = 4064
  496. [ 2.425030@0] ir irblaster probe
  497. [ 2.428169@0] Remote Driver
  498. [ 2.430868@0] Remote platform_data g_remote_base=fe600580
  499. [ 2.436195@0] set drvdata completed
  500.  
  501.  
  502. [ 2.439782@0] device_create_file completed
  503.  
  504.  
  505. [ 2.444272@0] input: aml_keypad as /devices/platform/meson-remote/input/input0
  506. [ 2.451417@0] input_register_device completed
  507.  
  508.  
  509. [ 2.455774@0] [0x0] = 0x1dd0190
  510. [ 2.458858@0] [0x4] = 0xf800ca
  511. [ 2.461854@0] [0x8] = 0x82006e
  512. [ 2.464878@0] [0xc] = 0x3c0030
  513. [ 2.467942@0] [0x10] = 0x30fa0013
  514. [ 2.471231@0] [0x18] = 0x6f19000
  515. [ 2.474413@0] [0x1c] = 0x9f40
  516. [ 2.474503@2] hub 1-1:1.0: USB hub found
  517. [ 2.481286@0] [0x20] = 0x0
  518. [ 2.483958@0] [0x24] = 0x0
  519. [ 2.483968@2] hub 1-1:1.0: 4 ports detected
  520. [ 2.490835@3] [0x28] = 0x0
  521. [ 2.493474@3] set_remote_mode[65]
  522. [ 2.496815@3] remote config major:326
  523.  
  524.  
  525. [ 2.500598@3] physical address:0x21072000
  526. [ 2.504513@3] ADC Keypad Driver init.
  527. [ 2.508221@3] ==touch_ts_init==
  528. [ 2.511312@3] ==ft5x0x_ts_init==
  529. [ 2.514474@3] ==goodix_ts_init==
  530. [ 2.517713@3] i2c-core: driver [gslx680_compatible] using legacy suspend method
  531. [ 2.524939@3] i2c-core: driver [gslx680_compatible] using legacy resume method
  532. [ 2.532175@3] !!!ntp_ts: ret = 0.
  533. [ 2.535515@3] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
  534. [ 2.541953@3] i2c-core: driver [ct36x] using legacy suspend method
  535. [ 2.548091@3] i2c-core: driver [ct36x] using legacy resume method
  536. [ 2.554153@3] VTL ct36x TouchScreen driver End.
  537. [ 2.558666@3] ==gsl_ts_init==
  538. [ 2.561624@3] ret=0
  539. [ 2.563808@3] i2c-core: driver [mir3da] using legacy suspend method
  540. [ 2.569936@3] i2c-core: driver [mir3da] using legacy resume method
  541. [ 2.576100@3] i2c-core: driver [lis3dh_acc] using legacy suspend method
  542. [ 2.582677@3] i2c-core: driver [lis3dh_acc] using legacy resume method
  543. [ 2.589213@3] i2c-core: driver [bma222] using legacy suspend method
  544. [ 2.595412@3] i2c-core: driver [bma222] using legacy resume method
  545. [ 2.601613@3] i2c-core: driver [dmard06] using legacy suspend method
  546. [ 2.607902@3] i2c-core: driver [dmard06] using legacy resume method
  547. [ 2.614155@3] lsm303d driver: init
  548. [ 2.617560@3] i2c-core: driver [dmard10] using legacy suspend method
  549. [ 2.623844@3] i2c-core: driver [dmard10] using legacy resume method
  550. [ 2.630113@3] stk8313_init
  551. [ 2.632789@3] ======stk831x init ok======
  552. [ 2.636767@3] stk831x_init
  553. [ 2.639465@3] mxc622x accelerometer driver: init
  554. [ 2.644055@3] i2c-core: driver [mxc622x] using legacy suspend method
  555. [ 2.650376@3] i2c-core: driver [mxc622x] using legacy resume method
  556. [ 2.656619@3] mxc6255xc accelerometer driver: init
  557. [ 2.661393@3] i2c-core: driver [mxc6255xc] using legacy suspend method
  558. [ 2.667886@3] i2c-core: driver [mxc6255xc] using legacy resume method
  559. [ 2.674352@3] cm3217 v.1.0.0.1
  560. [ 2.677352@3] i2c-core: driver [elan_epl6814] using legacy suspend method
  561. [ 2.684088@3] i2c-core: driver [elan_epl6814] using legacy resume method
  562. [ 2.690789@3] i2c-core: driver [LTR501] using legacy suspend method
  563. [ 2.697011@3] i2c-core: driver [LTR501] using legacy resume method
  564. [ 2.703211@3] GPIO Keypad Driver init.
  565. [ 2.706956@3] ==gpio_key_probe==
  566. [ 2.710095@3] gpio request set to High-Z status
  567. [ 2.714615@3] reg:2620,clearmask=400040,setmask=1
  568. [ 2.719369@3] reg:2622,clearmask=ff0000,set pin=3
  569. [ 2.724049@3] reg:2623,clearmask=7000000,setmask=7
  570. [ 2.728827@3] reg:2620,clearmask=800080,setmask=10001
  571. [ 2.733931@3] reg:2622,clearmask=ff000000,set pin=3
  572. [ 2.738785@3] reg:2623,clearmask=70000000,setmask=7
  573. [ 2.743666@3] power key(116) registed.
  574. [ 2.743669@0] key 116 up
  575. [ 2.749983@3] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
  576. [ 2.757341@3] gpio keypad register input device completed.
  577.  
  578.  
  579. [ 2.762799@3] gpio keypad major:325
  580.  
  581.  
  582. [ 2.766464@3] spi_nor_init
  583. [ 2.766992@0] usb 1-1.3: new high-speed USB device number 3 using dwc_otg
  584. [ 2.775871@3] amlogic_spi_nor_probe:
  585. [ 2.779364@3] amlogic_spi->state_name:default
  586. [ 2.783750@3] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  587. [ 2.791288@3] check_storage_device : spi boot_device_flag : -1
  588. [ 2.797044@3] spi_nor_probe
  589. [ 2.799810@3] spi_nor_probe 629 boot_device_flag 2 : do not init spi
  590. [ 2.806142@3] spi_nor: probe of apollospi:32766 failed with error -12
  591. [ 2.812560@3] amlogic_spi_nor_probe over
  592. [ 2.816533@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  593. [ 2.826303@3] host->base fe108c20
  594. [ 2.829221@3] get property: port, value:0x00000001
  595. [ 2.835697@3] get property: card_type, value:0x00000005
  596. [ 2.842219@3] pdata->caps 7
  597. [ 2.844971@3] pdata->caps2 0
  598. [ 2.847839@3] get property: port, value:0x00000001
  599. [ 2.854333@3] get property: ocr_avail, value:0x00200000
  600. [ 2.860841@3] get property: f_min, value:0x000493e0
  601. [ 2.867342@3] get property: f_max, value:0x02faf080
  602. [ 2.871068@0] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  603. [ 2.880277@3] get property: max_req_size, value:0x00020000
  604. [ 2.886772@3] get property: irq_in, value:0x00000003
  605. [ 2.886858@0] scsi0 : usb-storage 1-1.3:1.0
  606. [ 2.897424@3] get property: irq_out, value:0x00000005
  607. [ 2.903918@3] get property: gpio_cd, str:CARD_6
  608. [ 2.909905@3] get property: pinname, str:sd
  609. [ 2.915531@3] get property: jtag_pin, str:CARD_0
  610. [ 2.921519@3] get property: card_type, value:0x00000005
  611. [ 2.928020@3] get property: gpio_dat3, str:CARD_4
  612. [ 2.966639@3] reg:2620,clearmask=80008,setmask=10001
  613. [ 2.966678@3] reg:2621,clearmask=ff000000,set pin=64
  614. [ 2.970990@3] reg:2623,clearmask=7000,setmask=7
  615. [ 2.975498@3] reg:2620,clearmask=200020,setmask=1
  616. [ 2.980265@3] reg:2622,clearmask=ff00,set pin=64
  617. [ 2.984859@3] reg:2623,clearmask=700000,setmask=7
  618. [ 2.989667@3] get property: port, value:0x00000000
  619. [ 2.996042@3] get property: card_type, value:0x00000003
  620. [ 3.002551@3] SDIO Wifi used port SDHC, Closd SDIO.
  621. [ 3.156612@3] [aml_sdio_probe] aml_sdio_probe() success!
  622. [ 3.157700@3] host->base fe108e00
  623. [ 3.159600@3] get property: port, value:0x00000005
  624. [ 3.166077@3] get property: card_type, value:0x00000001
  625. [ 3.172616@3] pdata->caps 80000547
  626. [ 3.175958@3] pdata->caps2 0
  627. [ 3.178827@3] get property: port, value:0x00000005
  628. [ 3.185320@3] get property: ocr_avail, value:0x00200000
  629. [ 3.191828@3] get property: f_min, value:0x000493e0
  630. [ 3.198329@3] get property: f_max, value:0x05f5e100
  631. [ 3.204824@3] get property: max_req_size, value:0x00020000
  632. [ 3.211334@3] get property: pinname, str:emmc
  633. [ 3.217139@3] get property: card_type, value:0x00000001
  634. [ 3.223635@3] get property: gpio_dat3, str:BOOT_3
  635. [ 3.229635@3] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
  636. [ 3.266625@1] aml_emmc_hw_reset 1329
  637. [ 3.266642@3] get property: port, value:0x00000003
  638. [ 3.266645@3] get property: card_type, value:0x00000003
  639. [ 3.266679@3] pdata->caps 78107
  640. [ 3.266681@3] pdata->caps2 0
  641. [ 3.266683@3] get property: port, value:0x00000003
  642. [ 3.266686@3] get property: ocr_avail, value:0x00200080
  643. [ 3.266688@3] get property: f_min, value:0x000493e0
  644. [ 3.266690@3] get property: f_max, value:0x05f5e100
  645. [ 3.266693@3] get property: max_req_size, value:0x00020000
  646. [ 3.266698@3] get property: pinname, str:sdio
  647. [ 3.266700@3] get property: card_type, value:0x00000003
  648. [ 3.336064@1] mmc_init_card
  649. [ 3.409401@1] emmc: BKOPS_EN bit is not set
  650. [ 3.409429@1] ###check hw reset function is already enabled here
  651. [ 3.414611@1] Activate high speed
  652. [ 3.418097@1] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width
  653. [ 3.425879@1] mmcblk0: emmc:0001 8WMB3R 7.28 GiB
  654. [ 3.430431@1] mmcblk0boot0: emmc:0001 8WMB3R partition 1 4.00 MiB
  655. [ 3.436481@1] mmcblk0boot1: emmc:0001 8WMB3R partition 2 4.00 MiB
  656. [ 3.457486@1] mmcblk0: unknown partition table
  657. [ 3.457897@1] emmc read lba=0x12000, blocks=0x1 OK!
  658. [ 3.461917@1] emmc read lba=0x12001, blocks=0x1 OK!
  659. [ 3.466086@1] [mmc_read_partition_tbl] mmc read partition OK!
  660. [ 3.471818@1] add_emmc_partition
  661. [ 3.475121@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  662. [ 3.483532@1] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  663. [ 3.491933@1] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  664. [ 3.500343@1] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  665. [ 3.508763@1] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  666. [ 3.516611@3] [aml_sdhc_probe] aml_sdhc_probe() success!
  667. [ 3.516684@3] [dsp]DSP start addr 0xc5e00000
  668. [ 3.516705@3] [dsp]register dsp to char divece(352)
  669. [ 3.516932@3] amlogic audio spdif interface device init!
  670. [ 3.517002@3] device name=nand_key open error
  671. [ 3.517005@3] aml_keys: version 0 can not be init c0af2534
  672. [ 3.517007@3] device name=emmc_key open error
  673. [ 3.517009@3] aml_keys: version 0 can not be init c0af2534
  674. [ 3.517607@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  675. [ 3.519165@3] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input2
  676. [ 3.519259@3] [RN5T618] NO BATTERY_PARAMETERS FOUND
  677. [ 3.519262@3] [RN5T618]rn5t618_otg_change, value:1, is_short:0
  678. [ 3.520352@3] register 0xB3:33
  679. [ 3.523398@3] ------------[ cut here ]------------
  680. [ 3.523411@3] WARNING: at /data/jp/jb-stvm8-4.4-release-20150526/common/kernel/workqueue.c:1368 __queue_work+0x1b8/0x258()
  681. [ 3.523414@3] Modules linked in:
  682. [ 3.523419@3] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.10.33-g53de8ee 53de8ee(20150701.173038)
  683. [ 3.523441@3] [<c00149c8>] (unwind_backtrace+0x0/0xf8) from [<c0011aac>] (show_stack+0x10/0x14)
  684. [ 3.523451@3] [<c0011aac>] (show_stack+0x10/0x14) from [<c0030ce8>] (warn_slowpath_common+0x4c/0x6c)
  685. [ 3.523458@3] [<c0030ce8>] (warn_slowpath_common+0x4c/0x6c) from [<c0030d24>] (warn_slowpath_null+0x1c/0x24)
  686. [ 3.523465@3] [<c0030d24>] (warn_slowpath_null+0x1c/0x24) from [<c0046cc0>] (__queue_work+0x1b8/0x258)
  687. [ 3.523472@3] [<c0046cc0>] (__queue_work+0x1b8/0x258) from [<c0046e0c>] (queue_work_on+0x40/0x4c)
  688. [ 3.523480@3] [<c0046e0c>] (queue_work_on+0x40/0x4c) from [<c04dbc14>] (rn5t618_otg_change+0x140/0x188)
  689. [ 3.523488@3] [<c04dbc14>] (rn5t618_otg_change+0x140/0x188) from [<c04dbed8>] (rn5t618_battery_probe+0x27c/0x594)
  690. [ 3.523497@3] [<c04dbed8>] (rn5t618_battery_probe+0x27c/0x594) from [<c0299c14>] (platform_drv_probe+0x14/0x18)
  691. [ 3.523505@3] [<c0299c14>] (platform_drv_probe+0x14/0x18) from [<c0298a4c>] (driver_probe_device+0xc4/0x20c)
  692. [ 3.523511@3] [<c0298a4c>] (driver_probe_device+0xc4/0x20c) from [<c0298bfc>] (__driver_attach+0x68/0x8c)
  693. [ 3.523521@3] [<c0298bfc>] (__driver_attach+0x68/0x8c) from [<c02971b8>] (bus_for_each_dev+0x4c/0x8c)
  694. [ 3.523529@3] [<c02971b8>] (bus_for_each_dev+0x4c/0x8c) from [<c02981b4>] (bus_add_driver+0xcc/0x234)
  695. [ 3.523536@3] [<c02981b4>] (bus_add_driver+0xcc/0x234) from [<c0299148>] (driver_register+0xa0/0x13c)
  696. [ 3.523546@3] [<c0299148>] (driver_register+0xa0/0x13c) from [<c04da56c>] (rn5t618_battery_init+0x10/0x34)
  697. [ 3.523554@3] [<c04da56c>] (rn5t618_battery_init+0x10/0x34) from [<c0008554>] (do_one_initcall+0x94/0x144)
  698. [ 3.523563@3] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0a72b74>] (kernel_init_freeable+0x100/0x1d0)
  699. [ 3.523575@3] [<c0a72b74>] (kernel_init_freeable+0x100/0x1d0) from [<c072bbb0>] (kernel_init+0x8/0xe4)
  700. [ 3.523584@3] [<c072bbb0>] (kernel_init+0x8/0xe4) from [<c000e1d8>] (ret_from_fork+0x14/0x3c)
  701. [ 3.523596@3] ---[ end trace 8543788bd1c22495 ]---
  702. [ 3.629560@2] vdin_drv_init: major 323
  703. [ 3.629668@2] amvdec_656in module: init.
  704. [ 3.629671@2] amvdec_656in_init_module:major 322
  705. [ 3.629894@2] amvdec_656in probe ok.
  706. [ 3.630099@2] amvdec_csi probe ok.
  707. [ 3.630114@2] [viuin..]viuin_init_module viuin module init
  708. [ 3.630220@2] [viuin..]viuin_probe probe ok.
  709. [ 3.630385@2] [isp..]isp_probe isp probe ok.
  710. [ 3.630428@2] sii5293, sii5293drv driver starting!
  711. [ 3.630432@2] sii5293, Version: CP5293-v0.90.01, Build: 11:13:58-Jun 30 2015
  712. [ 3.630433@2] sii5293, register_chrdev sii5293
  713. [ 3.630860@2] sii5293, Starting sii-5293
  714. [ 3.630952@2] uart_ao is using the pin GPIOAO_0 as pinmux
  715. [ 3.630958@2] pinmux-m8 pinmux: request() failed for pin 0
  716. [ 3.630962@2] pinmux-m8 pinmux: pin-0 (amlogic:gpio:0) status -22
  717. [ 3.630966@2] HalInit gpio_request for GPIO 0 (H/W Reset) failed, status: -22
  718. [ 3.630969@2] Initialization of HAL failed, error code: 1
  719. [ 3.630995@2] sii5293 mhldrv initialized failed !
  720. [ 3.631172@2] sii5293 [SiiMhlInit] something wrong !
  721. [ 3.631694@2] amaudio2: device amaudio2 created
  722. [ 3.631815@2] Error: Didn't get power valid value --- wifi_power_probe 332
  723. [ 3.631819@2] wifi_power power_gpio is 6
  724. [ 3.631822@2] wifi_power power_gpio2 is 123
  725. [ 3.631964@2] amlogic rfkill init
  726. [ 3.632003@2] not get gpio_en
  727. [ 3.632005@2] not get gpio_wake
  728. [ 3.656674@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  729. [ 3.656677@2] clock_32k_pin(122) : (null)
  730. [ 3.656684@2] clock_32k_pin(122) : sdio_wifi
  731. [ 3.767385@2] aml_hw_crypto initialization.
  732. [ 3.767899@2] usbcore: registered new interface driver snd-usb-audio
  733. [ 3.768139@2] enter rt5616_modinit
  734. [ 3.768345@2] == ES8323 == es8323_modinit()
  735. [ 3.768658@2] i2s get no clk src setting in dts, use the default mpll 0
  736. [ 3.768663@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  737. [ 3.768801@2] [aml-spdif-dai]enter aml_dai_spdif_init
  738. [ 3.768805@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  739. [ 3.768806@2] audio_set_958_clk, freq=4,
  740. [ 3.768813@2] IEC958 16bit
  741. [ 3.768817@2] hdmitx: audio: aout notify rate 48000
  742. [ 3.768819@2] hdmitx: audio: aout notify size 16
  743. [ 3.768821@2] hdmitx: audio: aout notify format CT_PCM
  744. [ 3.768873@2] [aml-spdif-dai]aml_spdif_probe
  745. [ 3.768964@2] test codec dummy_codec
  746. [ 3.768967@2] test_codec_of_node, node dummy_codec disable
  747. [ 3.768969@2] no external codec, using aml default codec
  748. [ 3.769044@2] enter spdif_dit_probe
  749. [ 3.769045@2] aml_spdif_unmute
  750. [ 3.769171@2] codec_name = aml_m8_codec.0
  751. [ 3.769724@2] p_aml_audio->hp_disable=1
  752. [ 3.769726@2] falied to get spk event delay time paraments from dts file
  753. [ 3.769728@2] spk_event delay_time = 0
  754. [ 4.030164@1] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  755. [ 4.031678@0] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
  756. [ 4.032890@2] sd 0:0:0:0: [sda] 30481152 512-byte logical blocks: (15.6 GB/14.5 GiB)
  757. [ 4.033528@2] sd 0:0:0:0: [sda] Write Protect is off
  758. [ 4.034062@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
  759. [ 4.036633@3] sd 0:0:0:0: [sda] No Caching mode page found
  760. [ 4.036637@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
  761. [ 4.039631@3] sd 0:0:0:0: [sda] No Caching mode page found
  762. [ 4.039635@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
  763. [ 4.040776@3] sda: sda1 sda2
  764. [ 4.043007@3] sd 0:0:0:0: [sda] No Caching mode page found
  765. [ 4.043011@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
  766. [ 4.043015@3] sd 0:0:0:0: [sda] Attached SCSI removable disk
  767. [ 4.112449@3] [mmcblk0p07] misc offset 0x00002d400000, size 0x000002000000
  768. [ 4.113340@0] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
  769. [ 4.113363@0] aml_snd_m8 aml_m8_sound_card.5: AML-M8 <-> aml-i2s-dai.0 mapping ok
  770. [ 4.137120@3] [mmcblk0p08] boot offset 0x00002fc00000, size 0x000002000000
  771. [ 4.145475@3] [mmcblk0p09] system offset 0x000032400000, size 0x000040000000
  772. [ 4.149331@0] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
  773. [ 4.162800@3] [mmcblk0p10] backup offset 0x000072c00000, size 0x000020000000
  774. [ 4.163683@0] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
  775. [ 4.163701@0] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok
  776. [ 4.187915@3] [mmcblk0p11] data offset 0x000093400000, size 0x00013ec00000
  777. [ 4.196167@3] card key: card_blk_probe.
  778. [ 4.200062@3] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  779. [ 4.206993@3] i=0,register --- emmc_key
  780. [ 4.207208@0] -----ext_codec=0---
  781. [ 4.207222@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  782. [ 4.207340@0] GACT probability NOT on
  783. [ 4.207347@0] Mirror/redirect action on
  784. [ 4.207350@0] u32 classifier
  785. [ 4.207351@0] Actions configured
  786. [ 4.207355@0] Netfilter messages via NETLINK v0.30.
  787. [ 4.207393@0] nf_conntrack version 0.5.0 (12939 buckets, 51756 max)
  788. [ 4.207775@0] ctnetlink v0.93: registering with nfnetlink.
  789. [ 4.207824@0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  790. [ 4.207825@0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  791. [ 4.263606@3] emmc key: emmc_key_init:450 ok.
  792. [ 4.263669@0] xt_time: kernel timezone is -0000
  793. [ 4.263763@0] ipip: IPv4 over IPv4 tunneling driver
  794. [ 4.264175@0] ip_tables: (C) 2000-2006 Netfilter Core Team
  795. [ 4.264288@0] arp_tables: (C) 2002 David S. Miller
  796. [ 4.264316@0] TCP: cubic registered
  797. [ 4.264318@0] Initializing XFRM netlink socket
  798. [ 4.264632@0] NET: Registered protocol family 10
  799. [ 4.265203@0] mip6: Mobile IPv6
  800. [ 4.265222@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  801. [ 4.265367@0] sit: IPv6 over IPv4 tunneling driver
  802. [ 4.266014@0] NET: Registered protocol family 17
  803. [ 4.266039@0] NET: Registered protocol family 15
  804. [ 4.266088@0] Bridge firewalling registered
  805. [ 4.266183@0] Bluetooth: RFCOMM TTY layer initialized
  806. [ 4.266199@0] Bluetooth: RFCOMM socket layer initialized
  807. [ 4.266201@0] Bluetooth: RFCOMM ver 1.11
  808. [ 4.266204@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  809. [ 4.266205@0] Bluetooth: BNEP filters: protocol multicast
  810. [ 4.266211@0] Bluetooth: BNEP socket layer initialized
  811. [ 4.266213@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  812. [ 4.266218@0] Bluetooth: HIDP socket layer initialized
  813. [ 4.266237@0] l2tp_core: L2TP core driver, V2.0
  814. [ 4.266244@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  815. [ 4.266246@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  816. [ 4.266259@0] l2tp_netlink: L2TP netlink interface
  817. [ 4.266282@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  818. [ 4.266295@0] l2tp_debugfs: L2TP debugfs support
  819. [ 4.266297@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  820. [ 4.266322@0] NET: Registered protocol family 35
  821. [ 4.409986@0] VFP support v0.3: [ 4.410014@3] Exit aml_emmc_partition_ops OK.
  822. implementor 41 architecture 3 part 30 variant 9 rev 4
  823. [ 4.419268@3] mmcblk0boot1: unknown partition table
  824. [ 4.420023@3] mmcblk0boot0: unknown partition table
  825. [ 4.432011@2] Registering SWP/SWPB emulation handler
  826. [ 4.436937@2] enter meson_pm_init
  827. [ 4.440344@2] enter meson_pm_probe!
  828. [ 4.443692@2] meson_pm_probe done !
  829. [ 4.447691@2] file system registered
  830. [ 4.451372@2] android_usb gadget: Mass Storage Function, version: 2009/09/11
  831. [ 4.457746@2] android_usb gadget: Number of LUNs=2
  832. [ 4.462499@2] lun0: LUN: removable file: (no medium)
  833. [ 4.467534@2] lun1: LUN: removable file: (no medium)
  834. [ 4.472716@2] android_usb gadget: android_usb ready
  835. [ 4.477830@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  836. [ 4.484796@2] ### dt-test ### No testcase data in device tree; not running tests
  837. [ 4.492249@2] meson_cpufreq: no voltage_control prop
  838. [ 4.497095@2] voltage_control = 0
  839. [ 4.501153@2] <<-GTP-INFO->> GTP driver installing...
  840. [ 4.505488@2] hdmitx: cec: CEC init
  841. [ 4.508921@3] hdmitx: cec: CEC task process
  842. [ 4.509022@2] input: cec_input as /devices/virtual/input/input3
  843. [ 4.518990@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  844. [ 4.5[ 4.546610@2] Changing uart_ao_ttyS0: baud from 0 to 115200
  845. [ 4.573568@2] Board checking OK, continue ...
  846. [ 4.573688@2] Freeing unused kernel memory: 232K (c0a72000 - c0aac000)
  847. [ 4.600643@3] SELinux: Permission attach_queue in class tun_socket not defined in policy.
  848. [ 4.603262@3] SELinux: the above unknown classes and permissions will be denied
  849. [ 4.809948@3] type=1403 audit(0.820:2): policy loaded auid=4294967295 ses=4294967295
  850. [ 4.812148@3] SELinux: Loaded policy from /sepolicy
  851. [ 4.818786@3] type=1404 audit(0.830:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  852. [ 5.596105@3] init: mount /dev/block/system to target failed
  853. [ 5.596302@3] init: umount system fail before analy rc file
  854. [ 5.605703@3] aml_nftl_dev: module license 'Proprietary' taints kernel.
  855. [ 5.608308@3] Disabling lock debugging due to kernel taint
  856. [ 5.614936@3] boot_device_flag : -1
  857. �[ 6.617619@3] init: command 'loglevel' r=0
  858. [ 6.617650@3] init: command 'export' r=0
  859. [ 6.619978@3] init: command 'export' r=0
  860. [ 6.623878@3] init: command 'export' r=0
  861. [ 6.627811@3] init: command 'export' r=0
  862. [ 6.631680@3] init: command 'export' r=0
  863. [ 6.635580@3] init: command 'export' r=0
  864. [ 6.639493@3] init: command 'export' r=0
  865. [ 6.643389@3] init: command 'symlink' r=-1
  866. [ 6.647788@3] init: command 'mkdir' r=0
  867. [ 6.651299@3] init: command 'symlink' r=0
  868. [ 6.655309@3] init: command 'mkdir' r=0
  869. [ 6.659157@3] init: command 'mkdir' r=0
  870. [ 6.662960@3] init: command 'mkdir' r=0
  871. [ 6.666782@3] init: command 'mkdir' r=0
  872. [ 6.670523@3] init: mount /tmp to target failed
  873. [ 6.675020@3] init: command 'mount' r=0
  874. [ 6.678868@3] init: command 'chown' r=0
  875. [ 6.682658@3] init: command 'chmod' r=0
  876. [ 6.686474@3] init: processing action 0x99900 (fs)
  877. [ 6.691405@3] init: command 'mkdir' r=0
  878. [ 6.695159@3] init: command 'mkdir' r=0
  879. [ 6.699019@3] init: command 'mount' r=0
  880. [ 6.702725@3] init: command 'write' r=0
  881. [ 6.706508@3] android_usb: already disabled
  882. [ 6.710661@3] init: command 'write' r=0
  883. [ 6.714487@3] init: command 'write' r=0
  884. [ 6.718307@3] init: command 'write' r=0
  885. [ 6.722114@3] init: command 'write' r=0
  886. [ 6.725931@3] init: command 'write' r=0
  887. [ 6.729750@3] init: command 'write' r=0
  888. [ 6.733554@3] init: command 'write' r=0
  889. [ 6.737363@3] init: processing action 0x9a3a8 (mix_hwrng_into_linux_rng)
  890. [ 6.744028@3] init: /dev/hw_random not found
  891. [ 6.748277@3] init: command 'mix_hwrng_into_linux_rng' r=0
  892. [ 6.753728@3] init: processing action 0x9a3f0 (property_service_init)
  893. [ 6.760173@3] init: Unable to open persistent property directory /data/property errno: 2
  894. [ 6.768402@3] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  895. [ 6.777505@3] init: command 'property_service_init' r=0
  896. [ 6.782683@3] init: processing action 0x9a438 (signal_init)
  897. [ 6.788301@3] init: waitpid returned pid 109, status = 00000006
  898. [ 6.794122@3] init: process 'healthd', pid 109 exited
  899. [ 6.799162@3] init: process 'healthd' killing any children in process group
  900. [ 6.806114@3] init: property_changed: property_triggers_enabled == 0
  901. [ 6.812511@3] init: command 'signal_init' r=0
  902. [ 6.816842@3] init: processing action 0x9a480 (check_startup)
  903. [ 6.822572@3] init: command 'check_startup' r=0
  904. [ 6.827070@3] init: processing action 0x9a4c8 (queue_property_triggers)
  905. [ 6.833656@3] init: command 'queue_property_triggers' r=0
  906. [ 6.839031@3] init: processing action 0x9a510 (ubootenv_init)
  907. [ 6.844804@3] init: stat /dev/block/env OK
  908. [ 6.853967@3] init: property_set ro.ubootenv.varible.prefix is: ubootenv.var
  909. [ 6.855856@3] init: property_changed: property_triggers_enabled == 1
  910. [ 6.862275@3] init: property_changed: name [ro.ubootenv.varible.prefix] value [ubootenv.var]
  911. [ 6.870761@3] init: ubootenv varible prefix is: ubootenv.var
  912. [ 6.880298@3] init: property_changed: property_triggers_enabled == 1
  913. [ 6.882798@3] init: property_changed: name [ubootenv.var.has.accelerometer] value [true]
  914. [ 6.890982@3] init: update_bootenv_varible name [ubootenv.var.has.accelerometer] value [true]
  915. [ 6.899712@3] init: property_changed: property_triggers_enabled == 1
  916. [ 6.906029@3] init: property_changed: name [ubootenv.var.emac] value [efuse]
  917. [ 6.913149@3] init: update_bootenv_varible name [ubootenv.var.emac] value [efuse]
  918. [ 6.920824@3] init: property_changed: property_triggers_enabled == 1
  919. [ 6.927191@3] init: property_changed: name [ubootenv.var.wifi] value [usb]
  920. [ 6.934114@3] init: update_bootenv_varible name [ubootenv.var.wifi] value [usb]
  921. [ 6.941627@3] init: property_changed: property_triggers_enabled == 1
  922. [ 6.947992@3] init: property_changed: name [ubootenv.var.verhw] value [0x80000]
  923. [ 6.955351@3] init: update_bootenv_varible name [ubootenv.var.verhw] value [0x80000]
  924. [ 6.963296@3] init: property_changed: property_triggers_enabled == 1
  925. [ 6.969663@3] init: property_changed: name [ubootenv.var.camera] value [usb]
  926. [ 6.976767@3] init: update_bootenv_varible name [ubootenv.var.camera] value [usb]
  927. [ 6.984440@3] init: property_changed: property_triggers_enabled == 1
  928. [ 6.990814@3] init: property_changed: name [ubootenv.var.verubt] value [10d3da4(20150701.170752)]
  929. [ 6.999738@3] init: update_bootenv_varible name [ubootenv.var.verubt] value [10d3da4(20150701.170752)]
  930. [ 7.009238@3] init: property_changed: property_triggers_enabled == 1
  931. [ 7.015595@3] init: property_changed: name [ubootenv.var.ethaddr] value [ac:db:da:3c:fc:b8]
  932. [ 7.024013@3] init: update_bootenv_varible name [ubootenv.var.ethaddr] value [ac:db:da:3c:fc:b8]
  933. [ 7.032987@3] init: property_changed: property_triggers_enabled == 1
  934. [ 7.039355@3] init: property_changed: name [ubootenv.var.macaddr] value [ac:db:da:3c:fc:b8]
  935. [ 7.047760@3] init: update_bootenv_varible name [ubootenv.var.macaddr] value [ac:db:da:3c:fc:b8]
  936. [ 7.056738@3] init: property_changed: property_triggers_enabled == 1
  937. [ 7.063097@3] init: property_changed: name [ubootenv.var.cvbsmode] value [480cvbs]
  938. [ 7.070735@3] init: update_bootenv_varible name [ubootenv.var.cvbsmode] value [480cvbs]
  939. [ 7.078928@3] init: property_changed: property_triggers_enabled == 1
  940. [ 7.085288@3] init: property_changed: name [ubootenv.var.hdmimode] value [1080p]
  941. [ 7.092751@3] init: update_bootenv_varible name [ubootenv.var.hdmimode] value [1080p]
  942. [ 7.100774@3] init: property_changed: property_triggers_enabled == 1
  943. [ 7.107141@3] init: property_changed: name [ubootenv.var.poweroff] value [disable]
  944. [ 7.114759@3] init: update_bootenv_varible name [ubootenv.var.poweroff] value [disable]
  945. [ 7.122963@3] init: property_changed: property_triggers_enabled == 1
  946. [ 7.129331@3] init: property_changed: name [ubootenv.var.boardname] value [stvm8]
  947. [ 7.136870@3] init: update_bootenv_varible name [ubootenv.var.boardname] value [stvm8]
  948. [ 7.144973@3] init: property_changed: property_triggers_enabled == 1
  949. [ 7.151352@3] init: property_changed: name [ubootenv.var.boardtype] value [normal]
  950. [ 7.158975@3] init: update_bootenv_varible name [ubootenv.var.boardtype] value [normal]
  951. [ 7.167170@3] init: property_changed: property_triggers_enabled == 1
  952. [ 7.173531@3] init: property_changed: name [ubootenv.var.cecconfig] value [cec0]
  953. [ 7.180994@3] init: update_bootenv_varible name [ubootenv.var.cecconfig] value [cec0]
  954. [ 7.189016@3] init: property_changed: property_triggers_enabled == 1
  955. [ 7.195375@3] init: property_changed: name [ubootenv.var.firstboot] value [0]
  956. [ 7.202578@3] init: update_bootenv_varible name [ubootenv.var.firstboot] value [0]
  957. [ 7.210337@3] init: property_changed: property_triggers_enabled == 1
  958. [ 7.216707@3] init: property_changed: name [ubootenv.var.1024x768_x] value [10]
  959. [ 7.224066@3] init: update_bootenv_varible name [ubootenv.var.1024x768_x] value [10]
  960. [ 7.232005@3] init: property_changed: property_triggers_enabled == 1
  961. [ 7.238378@3] init: property_changed: name [ubootenv.var.1024x768_y] value [7]
  962. [ 7.245650@3] init: update_bootenv_varible name [ubootenv.var.1024x768_y] value [7]
  963. [ 7.253502@3] init: property_changed: property_triggers_enabled == 1
  964. [ 7.259875@3] init: property_changed: name [ubootenv.var.1280x800_x] value [12]
  965. [ 7.267240@3] init: update_bootenv_varible name [ubootenv.var.1280x800_x] value [12]
  966. [ 7.275168@3] init: property_changed: property_triggers_enabled == 1
  967. [ 7.281546@3] init: property_changed: name [ubootenv.var.1280x800_y] value [7]
  968. [ 7.288824@3] init: update_bootenv_varible name [ubootenv.var.1280x800_y] value [7]
  969. [ 7.296671@3] init: property_changed: property_triggers_enabled == 1
  970. [ 7.303034@3] init: property_changed: name [ubootenv.var.4k2k24hz_x] value [38]
  971. [ 7.310411@3] init: update_bootenv_varible name [ubootenv.var.4k2k24hz_x] value [38]
  972. [ 7.318341@3] init: property_changed: property_triggers_enabled == 1
  973. [ 7.324704@3] init: property_changed: name [ubootenv.var.4k2k24hz_y] value [21]
  974. [ 7.332081@3] init: update_bootenv_varible name [ubootenv.var.4k2k24hz_y] value [21]
  975. [ 7.340013@3] init: property_changed: property_triggers_enabled == 1
  976. [ 7.346375@3] init: property_changed: name [ubootenv.var.4k2k25hz_x] value [38]
  977. [ 7.353752@3] init: update_bootenv_varible name [ubootenv.var.4k2k25hz_x] value [38]
  978. [ 7.361684@3] init: property_changed: property_triggers_enabled == 1
  979. [ 7.368055@3] init: property_changed: name [ubootenv.var.4k2k25hz_y] value [21]
  980. [ 7.375413@3] init: update_bootenv_varible name [ubootenv.var.4k2k25hz_y] value [21]
  981. [ 7.383355@3] init: property_changed: property_triggers_enabled == 1
  982. [ 7.389725@3] init: property_changed: name [ubootenv.var.4k2k30hz_x] value [38]
  983. [ 7.397090@3] init: update_bootenv_varible name [ubootenv.var.4k2k30hz_x] value [38]
  984. [ 7.405019@3] init: property_changed: property_triggers_enabled == 1
  985. [ 7.411399@3] init: property_changed: name [ubootenv.var.4k2k30hz_y] value [21]
  986. [ 7.418761@3] init: update_bootenv_varible name [ubootenv.var.4k2k30hz_y] value [21]
  987. [ 7.426697@3] init: property_changed: property_triggers_enabled == 1
  988. [ 7.433057@3] init: property_changed: name [ubootenv.var.outputmode] value [480cvbs]
  989. [ 7.440868@3] init: update_bootenv_varible name [ubootenv.var.outputmode] value [480cvbs]
  990. [ 7.449235@3] init: property_changed: property_triggers_enabled == 1
  991. [ 7.455595@3] init: property_changed: name [ubootenv.var.1600x1200_x] value [15]
  992. [ 7.463058@3] init: update_bootenv_varible name [ubootenv.var.1600x1200_x] value [15]
  993. [ 7.471075@3] init: property_changed: property_triggers_enabled == 1
  994. [ 7.477448@3] init: property_changed: name [ubootenv.var.1600x1200_y] value [11]
  995. [ 7.484893@3] init: update_bootenv_varible name [ubootenv.var.1600x1200_y] value [11]
  996. [ 7.492919@3] init: property_changed: property_triggers_enabled == 1
  997. [ 7.499292@3] init: property_changed: name [ubootenv.var.1920x1200_x] value [19]
  998. [ 7.506743@3] init: update_bootenv_varible name [ubootenv.var.1920x1200_x] value [19]
  999. [ 7.514758@3] init: property_changed: property_triggers_enabled == 1
  1000. [ 7.521135@3] init: property_changed: name [ubootenv.var.1920x1200_y] value [11]
  1001. [ 7.528587@3] init: update_bootenv_varible name [ubootenv.var.1920x1200_y] value [11]
  1002. [ 7.536613@3] init: property_changed: property_triggers_enabled == 1
  1003. [ 7.542971@3] init: property_changed: name [ubootenv.var.2560x1600_x] value [25]
  1004. [ 7.550434@3] init: update_bootenv_varible name [ubootenv.var.2560x1600_x] value [25]
  1005. [ 7.558452@3] init: property_changed: property_triggers_enabled == 1
  1006. [ 7.564815@3] init: property_changed: name [ubootenv.var.2560x1600_y] value [15]
  1007. [ 7.572278@3] init: update_bootenv_varible name [ubootenv.var.2560x1600_y] value [15]
  1008. [ 7.580295@3] init: property_changed: property_triggers_enabled == 1
  1009. [ 7.586668@3] init: property_changed: name [ubootenv.var.480ioutputx] value [14]
  1010. [ 7.594113@3] init: update_bootenv_varible name [ubootenv.var.480ioutputx] value [14]
  1011. [ 7.602139@3] init: property_changed: property_triggers_enabled == 1
  1012. [ 7.608512@3] init: property_changed: name [ubootenv.var.480ioutputy] value [8]
  1013. [ 7.615871@3] init: update_bootenv_varible name [ubootenv.var.480ioutputy] value [8]
  1014. [ 7.623811@3] init: property_changed: property_triggers_enabled == 1
  1015. [ 7.630183@3] init: property_changed: name [ubootenv.var.480poutputx] value [14]
  1016. [ 7.637634@3] init: update_bootenv_varible name [ubootenv.var.480poutputx] value [14]
  1017. [ 7.645650@3] init: property_changed: property_triggers_enabled == 1
  1018. [ 7.652026@3] init: property_changed: name [ubootenv.var.480poutputy] value [8]
  1019. [ 7.659391@3] init: update_bootenv_varible name [ubootenv.var.480poutputy] value [8]
  1020. [ 7.667385@3] init: property_changed: property_triggers_enabled == 1
  1021. [ 7.673688@3] init: property_changed: name [ubootenv.var.576ioutputx] value [14]
  1022. [ 7.681151@3] init: update_bootenv_varible name [ubootenv.var.576ioutputx] value [14]
  1023. [ 7.689170@3] init: property_changed: property_triggers_enabled == 1
  1024. [ 7.695532@3] init: property_changed: name [ubootenv.var.576ioutputy] value [10]
  1025. [ 7.702995@3] init: update_bootenv_varible name [ubootenv.var.576ioutputy] value [10]
  1026. [ 7.711014@3] init: property_changed: property_triggers_enabled == 1
  1027. [ 7.717384@3] init: property_changed: name [ubootenv.var.576poutputx] value [14]
  1028. [ 7.724830@3] init: update_bootenv_varible name [ubootenv.var.576poutputx] value [14]
  1029. [ 7.732858@3] init: property_changed: property_triggers_enabled == 1
  1030. [ 7.739229@3] init: property_changed: name [ubootenv.var.576poutputy] value [12]
  1031. [ 7.746680@3] init: update_bootenv_varible name [ubootenv.var.576poutputy] value [12]
  1032. [ 7.754696@3] init: property_changed: property_triggers_enabled == 1
  1033. [ 7.761072@3] init: property_changed: name [ubootenv.var.720poutputx] value [0]
  1034. [ 7.768437@3] init: update_bootenv_varible name [ubootenv.var.720poutputx] value [0]
  1035. [ 7.776367@3] init: property_changed: property_triggers_enabled == 1
  1036. [ 7.782743@3] init: property_changed: name [ubootenv.var.720poutputy] value [0]
  1037. [ 7.790109@3] init: update_bootenv_varible name [ubootenv.var.720poutputy] value [0]
  1038. [ 7.798043@3] init: property_changed: property_triggers_enabled == 1
  1039. [ 7.804405@3] init: property_changed: name [ubootenv.var.audiodecode] value [dummy]
  1040. [ 7.812128@3] init: update_bootenv_varible name [ubootenv.var.audiodecode] value [dummy]
  1041. [ 7.820405@3] init: property_changed: property_triggers_enabled == 1
  1042. [ 7.826778@3] init: property_changed: name [ubootenv.var.1080ioutputx] value [42]
  1043. [ 7.834310@3] init: update_bootenv_varible name [ubootenv.var.1080ioutputx] value [42]
  1044. [ 7.842422@3] init: property_changed: property_triggers_enabled == 1
  1045. [ 7.848795@3] init: property_changed: name [ubootenv.var.1080ioutputy] value [20]
  1046. [ 7.856327@3] init: update_bootenv_varible name [ubootenv.var.1080ioutputy] value [20]
  1047. [ 7.864439@3] init: property_changed: property_triggers_enabled == 1
  1048. [ 7.870812@3] init: property_changed: name [ubootenv.var.1080poutputx] value [0]
  1049. [ 7.878264@3] init: update_bootenv_varible name [ubootenv.var.1080poutputx] value [0]
  1050. [ 7.886277@3] init: property_changed: property_triggers_enabled == 1
  1051. [ 7.892657@3] init: property_changed: name [ubootenv.var.1080poutputy] value [0]
  1052. [ 7.900108@3] init: update_bootenv_varible name [ubootenv.var.1080poutputy] value [0]
  1053. [ 7.908128@3] init: property_changed: property_triggers_enabled == 1
  1054. [ 7.914491@3] init: property_changed: name [ubootenv.var.1024x768_width] value [1003]
  1055. [ 7.922388@3] init: update_bootenv_varible name [ubootenv.var.1024x768_width] value [1003]
  1056. [ 7.930841@3] init: property_changed: property_triggers_enabled == 1
  1057. [ 7.937211@3] init: property_changed: name [ubootenv.var.1280x800_width] value [1255]
  1058. [ 7.945090@3] init: update_bootenv_varible name [ubootenv.var.1280x800_width] value [1255]
  1059. [ 7.953550@3] init: property_changed: property_triggers_enabled == 1
  1060. [ 7.959922@3] init: property_changed: name [ubootenv.var.4k2k24hz_width] value [3763]
  1061. [ 7.967807@3] init: update_bootenv_varible name [ubootenv.var.4k2k24hz_width] value [3763]
  1062. [ 7.976255@3] init: property_changed: property_triggers_enabled == 1
  1063. [ 7.982633@3] init: property_changed: name [ubootenv.var.4k2k25hz_width] value [3763]
  1064. [ 7.990518@3] init: update_bootenv_varible name [ubootenv.var.4k2k25hz_width] value [3763]
  1065. [ 7.998972@3] init: property_changed: property_triggers_enabled == 1
  1066. [ 8.005335@3] init: property_changed: name [ubootenv.var.4k2k30hz_width] value [3763]
  1067. [ 8.013231@3] init: update_bootenv_varible name [ubootenv.var.4k2k30hz_width] value [3763]
  1068. [ 8.021682@3] init: property_changed: property_triggers_enabled == 1
  1069. [ 8.028054@3] init: property_changed: name [ubootenv.var.1024x768_height] value [753]
  1070. [ 8.035933@3] init: update_bootenv_varible name [ubootenv.var.1024x768_height] value [753]
  1071. [ 8.044392@3] init: property_changed: property_triggers_enabled == 1
  1072. [ 8.050782@3] init: property_changed: name [ubootenv.var.1280x800_height] value [785]
  1073. [ 8.058651@3] init: update_bootenv_varible name [ubootenv.var.1280x800_height] value [785]
  1074. [ 8.067104@3] init: property_changed: property_triggers_enabled == 1
  1075. [ 8.073467@3] init: property_changed: name [ubootenv.var.1600x1200_width] value [1569]
  1076. [ 8.081451@3] init: update_bootenv_varible name [ubootenv.var.1600x1200_width] value [1569]
  1077. [ 8.089988@3] init: property_changed: property_triggers_enabled == 1
  1078. [ 8.096351@3] init: property_changed: name [ubootenv.var.1920x1200_width] value [1881]
  1079. [ 8.104335@3] init: update_bootenv_varible name [ubootenv.var.1920x1200_width] value [1881]
  1080. [ 8.112873@3] init: property_changed: property_triggers_enabled == 1
  1081. [ 8.119244@3] init: property_changed: name [ubootenv.var.2560x1600_width] value [2509]
  1082. [ 8.127216@3] init: update_bootenv_varible name [ubootenv.var.2560x1600_width] value [2509]
  1083. [ 8.135750@3] init: property_changed: property_triggers_enabled == 1
  1084. [ 8.142128@3] init: property_changed: name [ubootenv.var.480ioutputwidth] value [688]
  1085. [ 8.150013@3] init: update_bootenv_varible name [ubootenv.var.480ioutputwidth] value [688]
  1086. [ 8.158467@3] init: property_changed: property_triggers_enabled == 1
  1087. [ 8.164830@3] init: property_changed: name [ubootenv.var.480poutputwidth] value [688]
  1088. [ 8.172727@3] init: update_bootenv_varible name [ubootenv.var.480poutputwidth] value [688]
  1089. [ 8.181179@3] init: property_changed: property_triggers_enabled == 1
  1090. [ 8.187553@3] init: property_changed: name [ubootenv.var.4k2k24hz_height] value [2117]
  1091. [ 8.195515@3] init: update_bootenv_varible name [ubootenv.var.4k2k24hz_height] value [2117]
  1092. [ 8.204063@3] init: property_changed: property_triggers_enabled == 1
  1093. [ 8.210434@3] init: property_changed: name [ubootenv.var.4k2k25hz_height] value [2117]
  1094. [ 8.218406@3] init: update_bootenv_varible name [ubootenv.var.4k2k25hz_height] value [2117]
  1095. [ 8.226947@3] init: property_changed: property_triggers_enabled == 1
  1096. [ 8.233309@3] init: property_changed: name [ubootenv.var.4k2k30hz_height] value [2117]
  1097. [ 8.241293@3] init: update_bootenv_varible name [ubootenv.var.4k2k30hz_height] value [2117]
  1098. [ 8.249861@3] init: property_changed: property_triggers_enabled == 1
  1099. [ 8.256193@3] init: property_changed: name [ubootenv.var.576ioutputwidth] value [688]
  1100. [ 8.264090@3] init: update_bootenv_varible name [ubootenv.var.576ioutputwidth] value [688]
  1101. [ 8.272542@3] init: property_changed: property_triggers_enabled == 1
  1102. [ 8.278913@3] init: property_changed: name [ubootenv.var.576poutputwidth] value [688]
  1103. [ 8.286798@3] init: update_bootenv_varible name [ubootenv.var.576poutputwidth] value [688]
  1104. [ 8.295247@3] init: property_changed: property_triggers_enabled == 1
  1105. [ 8.301624@3] init: property_changed: name [ubootenv.var.720poutputwidth] value [1279]
  1106. [ 8.309595@3] init: update_bootenv_varible name [ubootenv.var.720poutputwidth] value [1279]
  1107. [ 8.318136@3] init: property_changed: property_triggers_enabled == 1
  1108. [ 8.324499@3] init: property_changed: name [ubootenv.var.1080ioutputwidth] value [1834]
  1109. [ 8.332569@3] init: update_bootenv_varible name [ubootenv.var.1080ioutputwidth] value [1834]
  1110. [ 8.341192@3] init: property_changed: property_triggers_enabled == 1
  1111. [ 8.347565@3] init: property_changed: name [ubootenv.var.1080poutputwidth] value [1919]
  1112. [ 8.355617@3] init: update_bootenv_varible name [ubootenv.var.1080poutputwidth] value [1919]
  1113. [ 8.364250@3] init: property_changed: property_triggers_enabled == 1
  1114. [ 8.370623@3] init: property_changed: name [ubootenv.var.1600x1200_height] value [1177]
  1115. [ 8.378681@3] init: update_bootenv_varible name [ubootenv.var.1600x1200_height] value [1177]
  1116. [ 8.387308@3] init: property_changed: property_triggers_enabled == 1
  1117. [ 8.393671@3] init: property_changed: name [ubootenv.var.1920x1200_height] value [1177]
  1118. [ 8.401741@3] init: update_bootenv_varible name [ubootenv.var.1920x1200_height] value [1177]
  1119. [ 8.410366@3] init: property_changed: property_triggers_enabled == 1
  1120. [ 8.416738@3] init: property_changed: name [ubootenv.var.2560x1600_height] value [1569]
  1121. [ 8.424790@3] init: update_bootenv_varible name [ubootenv.var.2560x1600_height] value [1569]
  1122. [ 8.433425@3] init: property_changed: property_triggers_enabled == 1
  1123. [ 8.439795@3] init: property_changed: name [ubootenv.var.480ioutputheight] value [462]
  1124. [ 8.447771@3] init: update_bootenv_varible name [ubootenv.var.480ioutputheight] value [462]
  1125. [ 8.456301@3] init: property_changed: property_triggers_enabled == 1
  1126. [ 8.462679@3] init: property_changed: name [ubootenv.var.480poutputheight] value [462]
  1127. [ 8.470651@3] init: update_bootenv_varible name [ubootenv.var.480poutputheight] value [462]
  1128. [ 8.479221@3] init: property_changed: property_triggers_enabled == 1
  1129. [ 8.485555@3] init: property_changed: name [ubootenv.var.576ioutputheight] value [554]
  1130. [ 8.493538@3] init: update_bootenv_varible name [ubootenv.var.576ioutputheight] value [554]
  1131. [ 8.502076@3] init: property_changed: property_triggers_enabled == 1
  1132. [ 8.508448@3] init: property_changed: name [ubootenv.var.576poutputheight] value [552]
  1133. [ 8.516413@3] init: update_bootenv_varible name [ubootenv.var.576poutputheight] value [552]
  1134. [ 8.524961@3] init: property_changed: property_triggers_enabled == 1
  1135. [ 8.531332@3] init: property_changed: name [ubootenv.var.720poutputheight] value [719]
  1136. [ 8.539304@3] init: update_bootenv_varible name [ubootenv.var.720poutputheight] value [719]
  1137. [ 8.547845@3] init: property_changed: property_triggers_enabled == 1
  1138. [ 8.554207@3] init: property_changed: name [ubootenv.var.digitaudiooutput] value [PCM]
  1139. [ 8.562191@3] init: update_bootenv_varible name [ubootenv.var.digitaudiooutput] value [PCM]
  1140. [ 8.570730@3] init: property_changed: property_triggers_enabled == 1
  1141. [ 8.577101@3] init: property_changed: name [ubootenv.var.1080ioutputheight] value [1042]
  1142. [ 8.585239@3] init: update_bootenv_varible name [ubootenv.var.1080ioutputheight] value [1042]
  1143. [ 8.593958@3] init: property_changed: property_triggers_enabled == 1
  1144. [ 8.600331@3] init: property_changed: name [ubootenv.var.1080poutputheight] value [1079]
  1145. [ 8.608476@3] init: update_bootenv_varible name [ubootenv.var.1080poutputheight] value [1079]
  1146. [ 8.617270@3] init: value: run storeboot
  1147. [ 8.621051@3] init: property_changed: property_triggers_enabled == 1
  1148. [ 8.627476@3] init: property_changed: name [ubootenv.var.bootcmd] value [run storeboot]
  1149. [ 8.635516@3] init: update_bootenv_varible name [ubootenv.var.bootcmd] value [run storeboot]
  1150. [ 8.644107@3] init: Get 79 varibles from /dev/block/env succeed!
  1151. [ 8.650083@3] init: command 'ubootenv_init' r=0
  1152. [ 8.654593@3] init: processing action 0x9a558 (firstboot_complete)
  1153. [ 8.660747@3] init: command 'firstboot_complete' r=0
  1154. [ 8.665682@3] init: processing action 0x99b00 (boot)
  1155. [ 8.670939@3] init: command 'ifup' r=0
  1156. [ 8.674419@3] init: command 'hostname' r=0
  1157. [ 8.678464@3] init: command 'domainname' r=0
  1158. [ 8.682701@3] init: command 'write' r=0
  1159. [ 8.686560@3] init: computing context for service '/sbin/sh'
  1160. [ 8.692228@3] init: starting 'display'
  1161. [ 8.696011@3] init: property_changed: property_triggers_enabled == 1
  1162. [ 8.699327@0] tvmode set to 480cvbs
  1163. [ 8.699327@0]
  1164.  
  1165.  
  1166. [ 8.699340@0] don't set the same mode as current.
  1167.  
  1168.  
  1169. [ 8.712272@3] init: property_changed: name [init.svc.display] value [running]
  1170. [ 8.719517@3] init: computing context for service '/sbin/remotecfg'
  1171. [ 8.725746@3] init: starting 'remotecontrol'
  1172. [ 8.730125@3] init: property_changed: property_triggers_enabled == 1
  1173. [ 8.730132@3] init: property_changed: name [init.svc.remotecontrol] value [running]
  1174. [ 8.730216@3] init: computing context for service '/sbin/sh'
  1175. [ 8.730300@3] init: starting 'console'
  1176. [ 8.730465@3] init: property_changed: property_triggers_enabled == 1
  1177. [ 8.730473@3] init: property_changed: name [init.svc.console] value [running]
  1178. [ 8.730557@3] init: computing context for service '/sbin/healthd'
  1179. [ 8.730659@3] init: starting 'healthd'
  1180. [ 8.730837@3] init: property_changed: property_triggers_enabled == 1
  1181. [ 8.730843@3] init: property_changed: name [init.svc.healthd] value [running]
  1182. [ 8.730917@3] init: computing context for service '/sbin/recovery'
  1183. [ 8.730999@3] init: starting 'recovery'
  1184. [ 8.731080@1] cur_mode = 0
  1185. [ 8.731083@1] [0x0] = 0x1dd0190
  1186. [ 8.731084@1] [0x4] = 0xf800ca
  1187. [ 8.731085@1] [0x8] = 0x82006e
  1188. [ 8.731086@1] [0xc] = 0x3c0030
  1189. [ 8.731087@1] [0x10] = 0x30fa0013
  1190. [ 8.731089@1] [0x18] = 0x6f19000
  1191. [ 8.731090@1] [0x1c] = 0x9f40
  1192. [ 8.731091@1] [0x20] = 0x0
  1193. [ 8.731092@1] [0x24] = 0x0
  1194. [ 8.731093@1] [0x28] = 0x0
  1195. [ 8.731094@1] set_remote_mode[65]
  1196. [ 8.731180@3] init: property_changed: property_triggers_enabled == 1
  1197. [ 8.731189@3] init: property_changed: name [init.svc.recovery] value [running]
  1198. [ 8.731200@3] init: command 'class_start' r=0
  1199. [ 8.731237@3] init: processing action 0x9a1b0 (property:sys.powerctl=*)
  1200. [ 8.731249@3] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  1201. [ 8.731256@3] init: powerctl: cannot expand '${sys.powerctl}'
  1202. [ 8.731263@3] init: command 'powerctl' r=-22
  1203. [ 8.731818@1] ==================================== read power key = 0x45bd02
  1204. [ 8.732062@1] init: waitpid returned pid 121, status = 00000000
  1205. [ 8.732068@1] init: process 'remotecontrol', pid 121 exited
  1206. [ 8.732100@1] init: property_changed: property_triggers_enabled == 1
  1207. [ 8.732104@1] init: pr# [ 9.061915@3] force enable DISCARD here for ext4 fs
  1208. [ 9.080597@3] EXT4-fs (mmcblk0p3): recovery complete
  1209. [ 9.082114@3] checked enable EXT4 DISCARD here
  1210. [ 9.084375@3] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:
  1211. [ 10.664304@0] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1212. [ 10.669709@1] force enable DISCARD here for ext4 fs
  1213. [ 10.689224@1] EXT4-fs (mmcblk0p10): recovery complete
  1214. [ 10.690689@1] checked enable EXT4 DISCARD here
  1215. [ 10.693058@1] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
  1216. [ 12.036608@2] Connect Timeout
  1217. [ 12.036636@2] Device Not Connected/Responding
  1218.  
  1219.  
  1220.  
  1221. #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!