Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl -a /dev/sdd
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.17.0-0.bpo.1-amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Blue Mobile
- Device Model: WDC WD10JPVX-22JC3T0
- Serial Number: WD-WX91A750X34T
- LU WWN Device Id: 5 0014ee 6060edf58
- Firmware Version: 01.01A01
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Aug 16 23:31:31 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 73) The previous self-test completed having
- a test element that failed and the test
- element that failed is not known.
- Total time to complete Offline
- data collection: (17160) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 192) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 193 193 051 Pre-fail Always - 35363
- 3 Spin_Up_Time 0x0027 180 175 021 Pre-fail Always - 1958
- 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2583
- 5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 2829
- 7 Seek_Error_Rate 0x002e 200 138 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 794
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1467
- 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 72023
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 157
- 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4233
- 194 Temperature_Celsius 0x0022 111 102 000 Old_age Always - 36
- 196 Reallocated_Event_Count 0x0032 101 101 000 Old_age Always - 99
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 6553 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 6553 occurred at disk power-on lifetime: 793 hours (33 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 01 00 00 00 00 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- b0 d5 01 e1 4f c2 00 80 04:30:22.959 SMART READ LOG
- b0 d5 01 e1 4f c2 00 80 04:30:22.959 SMART READ LOG
- b0 d6 01 e0 4f c2 00 80 04:30:22.948 SMART WRITE LOG
- Error 6552 occurred at disk power-on lifetime: 643 hours (26 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 61 00 00 00 00 a0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ef 02 00 00 00 00 a0 00 01:00:13.746 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:13.122 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:12.498 SET FEATURES [Enable write cache]
- Error 6551 occurred at disk power-on lifetime: 643 hours (26 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 61 00 00 00 00 a0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ef 02 00 00 00 00 a0 00 01:00:13.122 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:12.498 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:11.873 SET FEATURES [Enable write cache]
- Error 6550 occurred at disk power-on lifetime: 643 hours (26 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 61 00 00 00 00 a0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ef 02 00 00 00 00 a0 00 01:00:12.498 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:11.873 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:11.233 SET FEATURES [Enable write cache]
- Error 6549 occurred at disk power-on lifetime: 643 hours (26 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 61 00 00 00 00 a0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ef 02 00 00 00 00 a0 00 01:00:11.873 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:11.233 SET FEATURES [Enable write cache]
- ef 02 00 00 00 00 a0 00 01:00:10.609 SET FEATURES [Enable write cache]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: unknown failure 90% 794 -
- # 2 Extended offline Completed: unknown failure 90% 793 -
- # 3 Short offline Completed without error 00% 0 -
- # 4 Short offline Completed without error 00% 0 -
- # 5 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement