Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.13.0-169-g9323a5df'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '3.9.2 (default, Mar 20 2025, 22:21:41) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jul 14 20:29:57 2025 (1752521397.7 2060344.8)
===== Config file =====
[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA5
position_endstop = -10
position_max = 240
position_min = -15
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA6
position_endstop = -10
position_max = 225
position_min = -15
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 270
position_min = -4

[extruder]
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
gear_ratio = 42:12
rotation_distance = 26.3952
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PC5
min_temp = 0
max_temp = 300
pressure_advance = 0.0950
control = pid
pid_kp = 21.734
pid_ki = 1.050
pid_kd = 112.471

[heater_bed]
heater_pin = PA7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 81.000
pid_ki = 1.616
pid_kd = 1014.000
min_temp = 0
max_temp = 110

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[heater_fan hotend_fan]
pin = PC0

[fan]
pin = PA0

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method = command

[mcu PIS]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6687030674CB131-if00
restart_method = command

[adxl345]
cs_pin = PIS:gpio13
spi_software_sclk_pin = PIS:gpio10
spi_software_mosi_pin = PIS:gpio11
spi_software_miso_pin = PIS:gpio12
axes_map = x,-z,y

[resonance_tester]
accel_chip = adxl345
probe_points =
	100,100,20

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2000
max_z_velocity = 10
max_z_accel = 200

[bltouch]
sensor_pin = ^PC14
control_pin = PC13
x_offset = -31.8
y_offset = -40.5
z_offset = 2.915
speed = 10
pin_move_time = 1.0
probe_with_touch_mode = true
stow_on_each_sample = true
samples = 2
samples_result = average
sample_retract_dist = 2.0
samples_tolerance = 0.100
samples_tolerance_retries = 1

[virtual_sdcard]
path = /home/pi/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]
recover_velocity = 25

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}

	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}


	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False

	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}

	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"

	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}


	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}

	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}

	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}

	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro _CLIENT_LINEAR_MOVE]
description = Linear move with save and restore of the gcode state
gcode =
	{% set x_move = "X" ~ params.X if params.X is defined else "" %}
	{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
	{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
	{% set e_move = "E" ~ params.E if params.E is defined else "" %}
	{% set rate = "F" ~ params.F if params.F is defined else "" %}
	{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
	{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
	SAVE_GCODE_STATE NAME=_client_movement
	{% if x_move or y_move or z_move %}
	G9{ 0 if ABSOLUTE else 1 }
	{% endif %}
	{% if e_move %}
	M8{ 2 if ABSOLUTE_E else 3 }
	{% endif %}
	G1 { x_move } { y_move } { z_move } { e_move } { rate }
	RESTORE_GCODE_STATE NAME=_client_movement

[safe_z_home]
home_xy_position = 147,154
speed = 100
z_hop = 10
z_hop_speed = 5

[bed_mesh]
speed = 120
mesh_min = 20, 20
mesh_max = 200, 184.5
probe_count = 11,11
algorithm = bicubic

[gcode_macro TILT_ADJUST]
description = Start screws tilt adjust
gcode =
	SCREWS_TILT_CALCULATE

[screws_tilt_adjust]
screw1 = 50, 67
screw1_name = front left
screw2 = 226, 67
screw2_name = front right
screw3 = 226, 225
screw3_name = back right
screw4 = 50, 225
screw4_name = back left
horizontal_move_z = 10.
speed = 50.
screw_thread = CW-M3

[exclude_object]

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode =

	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}

	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}

	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}

	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}

	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}

	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}

	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}

	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }

	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }

	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }

	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }

	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}

	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}

	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }

	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}

	{% else %}

	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}

	{% endif %}

	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}

	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}

	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode =

	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}


	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}


	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}



	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}

	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}

	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}


	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}

	{% if cross_section < 5 %}

	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}

	{% else %}

	{% if verbose_enable == True %}

	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}

	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}

	{% if purge_y_origin > 0 %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }

	{% else %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Prepurge_State

	{% if purge_y_origin > 0 %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% else %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% endif %}

	RESTORE_GCODE_STATE NAME=Prepurge_State

	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode =

	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}


	{% if verbose_enable == True %}

	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Presmartpark_State

	G90
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

	RESTORE_GCODE_STATE NAME=Presmartpark_State

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 5
variable_fuzz_amount = 0.2
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 15
variable_smart_park_height = 10
gcode =

	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[temperature_sensor Raspberry_Pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[filament_switch_sensor e0_sensor]
switch_pin = !PC15
pause_on_runout = true
runout_gcode = PAUSE

[bed_mesh default]
version = 1
points =
	0.012500, -0.007500, -0.035000, -0.077500, -0.145000, -0.092500, -0.057500, -0.047500, 0.002500, 0.180000, 0.282500
	-0.002500, -0.025000, -0.052500, -0.122500, -0.167500, -0.127500, -0.082500, -0.075000, -0.007500, 0.170000, 0.300000
	-0.000000, -0.022500, -0.090000, -0.132500, -0.197500, -0.100000, -0.142500, -0.100000, -0.052500, 0.057500, 0.087500
	0.020000, 0.050000, -0.035000, -0.105000, -0.115000, -0.065000, -0.112500, -0.022500, -0.015000, 0.005000, 0.087500
	0.032500, -0.030000, -0.040000, -0.077500, -0.097500, -0.085000, -0.037500, -0.037500, -0.042500, 0.072500, 0.182500
	0.030000, 0.007500, -0.040000, -0.062500, -0.097500, -0.060000, -0.047500, -0.010000, -0.022500, 0.122500, 0.107500
	0.035000, -0.015000, 0.012500, -0.015000, -0.115000, -0.072500, -0.017500, -0.005000, 0.012500, 0.077500, 0.182500
	0.030000, -0.010000, -0.010000, -0.087500, -0.097500, -0.062500, -0.022500, -0.040000, 0.005000, 0.032500, 0.160000
	0.010000, 0.012500, -0.042500, -0.090000, -0.137500, -0.072500, -0.032500, 0.005000, -0.005000, 0.082500, 0.167500
	-0.012500, -0.027500, -0.085000, -0.097500, -0.130000, -0.080000, -0.140000, 0.010000, -0.005000, 0.052500, 0.155000
	-0.095000, -0.092500, -0.135000, -0.180000, -0.185000, -0.140000, -0.107500, -0.055000, -0.092500, -0.027500, 0.037500
x_count = 11
y_count = 11
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 20.0
max_x = 200.0
min_y = 20.0
max_y = 184.49999999999997
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1963835840: New connection
webhooks client 1963835840: Client info {'program': 'Moonraker', 'version': 'v0.9.3-87-g06cdffa'}
mcu 'mcu': got {'oid': 10, 'next_clock': 3984865408, 'value': 31612, '#name': 'analog_in_state', '#sent_time': 2060348.134310134, '#receive_time': 2060348.16317279}
mcu 'mcu': got {'oid': 17, 'next_clock': 3990745408, 'value': 31541, '#name': 'analog_in_state', '#sent_time': 2060348.189153831, '#receive_time': 2060348.233506279}
mcu 'mcu': got {'oid': 10, 'next_clock': 4010065408, 'value': 31613, '#name': 'analog_in_state', '#sent_time': 2060348.409596279, '#receive_time': 2060348.464185602}
Loaded MCU 'mcu' 144 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=84000000 MCU=stm32f401xc PWM_MAX=257 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PH0,PH1 RESERVE_PINS_serial=PA10,PA9 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=11 STEPPER_STEP_BOTH_EDGE=1
mcu 'PIS': Starting serial connect
mcu 'mcu': got {'oid': 17, 'next_clock': 4015945408, 'value': 31541, '#name': 'analog_in_state', '#sent_time': 2060348.475859456, '#receive_time': 2060348.5333853941}
mcu 'mcu': got {'oid': 10, 'next_clock': 4035265408, 'value': 31613, '#name': 'analog_in_state', '#sent_time': 2060348.475859456, '#receive_time': 2060348.7634296122}
mcu 'mcu': got {'oid': 17, 'next_clock': 4041145408, 'value': 31541, '#name': 'analog_in_state', '#sent_time': 2060348.475859456, '#receive_time': 2060348.8336168001}
mcu 'mcu': got {'oid': 10, 'next_clock': 4060465408, 'value': 31609, '#name': 'analog_in_state', '#sent_time': 2060348.475859456, '#receive_time': 2060349.063724248}
mcu 'mcu': got {'oid': 17, 'next_clock': 4066345408, 'value': 31542, '#name': 'analog_in_state', '#sent_time': 2060348.475859456, '#receive_time': 2060349.133826279}
Loaded MCU 'PIS' 132 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'PIS' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0_gpio0_gpio3_gpio2=gpio0,gpio3,gpio2 BUS_PINS_spi0_gpio16_gpio19_gpio18=gpio16,gpio19,gpio18 BUS_PINS_spi0_gpio20_gpio23_gpio22=gpio20,gpio23,gpio22 BUS_PINS_spi0_gpio4_gpio3_gpio2=gpio4,gpio3,gpio2 BUS_PINS_spi0_gpio4_gpio7_gpio6=gpio4,gpio7,gpio6 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1_gpio12_gpio11_gpio10=gpio12,gpio11,gpio10 BUS_PINS_spi1_gpio12_gpio15_gpio14=gpio12,gpio15,gpio14 BUS_PINS_spi1_gpio24_gpio27_gpio26=gpio24,gpio27,gpio26 BUS_PINS_spi1_gpio8_gpio11_gpio10=gpio8,gpio11,gpio10 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=2 STEPPER_STEP_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Configured MCU 'PIS' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Failed to verify BLTouch probe is raised; retrying.
webhooks client 1963835840: Disconnected
Failed to verify BLTouch probe is raised; retrying.
BLTouch raise probe error: BLTouch failed to raise probe
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (51.8, 60.5)    | (20.0, 20.0)
  1   | (69.8, 60.5)    | (38.0, 20.0)
  2   | (87.8, 60.5)    | (56.0, 20.0)
  3   | (105.8, 60.5)   | (74.0, 20.0)
  4   | (123.8, 60.5)   | (92.0, 20.0)
  5   | (141.8, 60.5)   | (110.0, 20.0)
  6   | (159.8, 60.5)   | (128.0, 20.0)
  7   | (177.8, 60.5)   | (146.0, 20.0)
  8   | (195.8, 60.5)   | (164.0, 20.0)
  9   | (213.8, 60.5)   | (182.0, 20.0)
  10  | (231.8, 60.5)   | (200.0, 20.0)
  11  | (231.8, 77.0)   | (200.0, 36.5)
  12  | (213.8, 77.0)   | (182.0, 36.5)
  13  | (195.8, 77.0)   | (164.0, 36.5)
  14  | (177.8, 77.0)   | (146.0, 36.5)
  15  | (159.8, 77.0)   | (128.0, 36.5)
  16  | (141.8, 77.0)   | (110.0, 36.5)
  17  | (123.8, 77.0)   | (92.0, 36.5)
  18  | (105.8, 77.0)   | (74.0, 36.5)
  19  | (87.8, 77.0)    | (56.0, 36.5)
  20  | (69.8, 77.0)    | (38.0, 36.5)
  21  | (51.8, 77.0)    | (20.0, 36.5)
  22  | (51.8, 93.4)    | (20.0, 52.9)
  23  | (69.8, 93.4)    | (38.0, 52.9)
  24  | (87.8, 93.4)    | (56.0, 52.9)
  25  | (105.8, 93.4)   | (74.0, 52.9)
  26  | (123.8, 93.4)   | (92.0, 52.9)
  27  | (141.8, 93.4)   | (110.0, 52.9)
  28  | (159.8, 93.4)   | (128.0, 52.9)
  29  | (177.8, 93.4)   | (146.0, 52.9)
  30  | (195.8, 93.4)   | (164.0, 52.9)
  31  | (213.8, 93.4)   | (182.0, 52.9)
  32  | (231.8, 93.4)   | (200.0, 52.9)
  33  | (231.8, 109.9)  | (200.0, 69.4)
  34  | (213.8, 109.9)  | (182.0, 69.4)
  35  | (195.8, 109.9)  | (164.0, 69.4)
  36  | (177.8, 109.9)  | (146.0, 69.4)
  37  | (159.8, 109.9)  | (128.0, 69.4)
  38  | (141.8, 109.9)  | (110.0, 69.4)
  39  | (123.8, 109.9)  | (92.0, 69.4)
  40  | (105.8, 109.9)  | (74.0, 69.4)
  41  | (87.8, 109.9)   | (56.0, 69.4)
  42  | (69.8, 109.9)   | (38.0, 69.4)
  43  | (51.8, 109.9)   | (20.0, 69.4)
  44  | (51.8, 126.3)   | (20.0, 85.8)
  45  | (69.8, 126.3)   | (38.0, 85.8)
  46  | (87.8, 126.3)   | (56.0, 85.8)
  47  | (105.8, 126.3)  | (74.0, 85.8)
  48  | (123.8, 126.3)  | (92.0, 85.8)
  49  | (141.8, 126.3)  | (110.0, 85.8)
...points 50 through 120 truncated
Stats 2060355.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=1656 bytes_read=6486 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=167 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999669 PIS: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=943 bytes_read=5218 bytes_retransmit=9 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=11999871 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.31 cputime=4.360 memavail=721844 print_time=156.803 buffer_time=0.149 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060356.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000009 bytes_write=1662 bytes_read=6622 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999635 PIS: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=949 bytes_read=5234 bytes_retransmit=9 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12001019 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.31 cputime=4.372 memavail=720100 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060357.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000009 bytes_write=1668 bytes_read=6743 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999543 PIS: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=955 bytes_read=5250 bytes_retransmit=9 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000262 adj=12000888 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.53 cputime=4.384 memavail=719492 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060358.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000009 bytes_write=1674 bytes_read=6864 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999434 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=961 bytes_read=5277 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000264 adj=12000805 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.53 cputime=4.396 memavail=719492 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
webhooks client 1964949544: New connection
webhooks client 1964949544: Client info {'program': 'Moonraker', 'version': 'v0.9.3-87-g06cdffa'}
Stats 2060359.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000009 bytes_write=1680 bytes_read=6970 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999385 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=967 bytes_read=5293 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000745 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.53 cputime=4.419 memavail=719492 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1964949544
webhooks: registering remote method 'reboot_machine' for connection id: 1964949544
webhooks: registering remote method 'pause_job_queue' for connection id: 1964949544
webhooks: registering remote method 'start_job_queue' for connection id: 1964949544
Stats 2060360.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000009 bytes_write=1686 bytes_read=7091 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=973 bytes_read=5309 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000647 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.53 cputime=4.444 memavail=718752 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060361.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1692 bytes_read=7225 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999317 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=979 bytes_read=5325 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000582 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.53 cputime=4.457 memavail=718752 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060362.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1698 bytes_read=7331 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=985 bytes_read=5341 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000247 adj=12000515 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.49 cputime=4.469 memavail=718500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060363.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1704 bytes_read=7452 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999307 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=991 bytes_read=5368 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000467 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.49 cputime=4.482 memavail=718000 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060364.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1710 bytes_read=7573 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999306 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=997 bytes_read=5384 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000457 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.49 cputime=4.494 memavail=718000 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060365.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1716 bytes_read=7679 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999297 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1003 bytes_read=5400 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000432 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.49 cputime=4.506 memavail=718000 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060366.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1722 bytes_read=7813 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1009 bytes_read=5416 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000413 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.49 cputime=4.520 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060367.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1728 bytes_read=7934 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999315 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1015 bytes_read=5432 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000380 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.45 cputime=4.533 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060368.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1734 bytes_read=8040 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999307 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1021 bytes_read=5459 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000372 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.45 cputime=4.546 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060369.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1740 bytes_read=8161 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999317 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1027 bytes_read=5475 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000372 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.45 cputime=4.559 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060370.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1746 bytes_read=8282 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999305 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1033 bytes_read=5491 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000363 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.45 cputime=4.572 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060371.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1752 bytes_read=8401 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999305 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1039 bytes_read=5507 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000330 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.45 cputime=4.584 memavail=717500 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060372.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1758 bytes_read=8522 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999298 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1045 bytes_read=5523 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000330 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.41 cputime=4.596 memavail=717504 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060373.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1764 bytes_read=8643 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999291 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1051 bytes_read=5550 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000341 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.41 cputime=4.608 memavail=717504 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060374.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1770 bytes_read=8749 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999292 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1057 bytes_read=5566 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000350 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.41 cputime=4.619 memavail=717504 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060375.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1776 bytes_read=8870 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999292 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1063 bytes_read=5582 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000348 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.41 cputime=4.630 memavail=717504 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060376.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1782 bytes_read=9004 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999282 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1069 bytes_read=5598 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000351 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.41 cputime=4.657 memavail=717032 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060377.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1788 bytes_read=9110 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999283 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1075 bytes_read=5614 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000367 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.38 cputime=4.674 memavail=717036 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060378.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1794 bytes_read=9231 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999282 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1081 bytes_read=5641 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000361 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.38 cputime=4.695 memavail=717036 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060379.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1800 bytes_read=9352 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1087 bytes_read=5657 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000357 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.38 cputime=4.717 memavail=717040 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060380.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1806 bytes_read=9458 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1093 bytes_read=5673 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000308 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.38 cputime=4.739 memavail=717040 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060381.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1812 bytes_read=9592 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1099 bytes_read=5689 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000321 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.38 cputime=4.761 memavail=717040 print_time=156.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060382.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2011 bytes_read=9728 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1105 bytes_read=5705 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000330 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.35 cputime=4.798 memavail=717040 print_time=185.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060383.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2017 bytes_read=9834 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1111 bytes_read=5732 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000336 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.35 cputime=4.818 memavail=717040 print_time=185.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060384.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2191 bytes_read=10042 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1117 bytes_read=5748 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000342 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.35 cputime=4.848 memavail=717040 print_time=185.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060385.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=2608 bytes_read=10505 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1123 bytes_read=5764 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000317 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.35 cputime=4.891 memavail=717044 print_time=186.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060386.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000008 bytes_write=3037 bytes_read=10987 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1129 bytes_read=5780 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000329 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.35 cputime=4.935 memavail=717044 print_time=187.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060387.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000008 bytes_write=3644 bytes_read=11553 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=318 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=83999317 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1135 bytes_read=5796 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.32 cputime=4.992 memavail=717044 print_time=189.273 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060388.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000008 bytes_write=4001 bytes_read=11888 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1141 bytes_read=5823 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000348 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.32 cputime=5.038 memavail=717004 print_time=189.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060389.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000008 bytes_write=4427 bytes_read=12293 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1147 bytes_read=5839 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000342 heater_bed: target=0 temp=19.7 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.32 cputime=5.081 memavail=717004 print_time=190.885 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060390.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000008 bytes_write=4844 bytes_read=12771 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999315 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1153 bytes_read=5855 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000349 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.32 cputime=5.124 memavail=717004 print_time=191.885 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060391.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000018 mcu_task_stddev=0.000006 bytes_write=5261 bytes_read=13234 bytes_retransmit=9 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999308 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1159 bytes_read=5871 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000358 heater_bed: target=0 temp=19.7 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.32 cputime=5.169 memavail=717008 print_time=192.885 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060392.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000018 mcu_task_stddev=0.000006 bytes_write=5829 bytes_read=13689 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999303 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1165 bytes_read=5887 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000362 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=5.221 memavail=717008 print_time=193.890 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060393.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000018 mcu_task_stddev=0.000006 bytes_write=6498 bytes_read=14030 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999308 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1171 bytes_read=5914 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000363 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=5.273 memavail=716944 print_time=196.691 buffer_time=2.009 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 2060394.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000018 mcu_task_stddev=0.000006 bytes_write=6504 bytes_read=14136 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999308 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1177 bytes_read=5930 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000345 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=5.294 memavail=716944 print_time=196.691 buffer_time=1.008 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060395.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000018 mcu_task_stddev=0.000006 bytes_write=6510 bytes_read=14242 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999314 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1183 bytes_read=5946 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000352 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.29 cputime=5.317 memavail=716944 print_time=196.691 buffer_time=0.008 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060396.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6539 bytes_read=14398 bytes_retransmit=9 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1189 bytes_read=5962 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000349 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=5.340 memavail=716944 print_time=196.691 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2060397.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6680 bytes_read=14630 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=36 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1195 bytes_read=5978 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=5.370 memavail=716936 print_time=198.207 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060398.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6714 bytes_read=14746 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1201 bytes_read=6005 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000337 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=5.392 memavail=716936 print_time=198.207 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2060399.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6845 bytes_read=15018 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=44 freq=83999318 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1207 bytes_read=6021 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000346 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.27 cputime=5.427 memavail=716940 print_time=200.726 buffer_time=0.041 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060400.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6912 bytes_read=15129 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1213 bytes_read=6037 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=5.448 memavail=716940 print_time=200.726 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060401.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6941 bytes_read=15254 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1225 bytes_read=6069 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=5.471 memavail=716940 print_time=200.726 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
BLTouch failed to verify sensor state
Stats 2060402.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7056 bytes_read=15519 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1231 bytes_read=6085 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000348 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.25 cputime=5.502 memavail=716940 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060403.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7062 bytes_read=15618 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1237 bytes_read=6112 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000357 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.25 cputime=5.524 memavail=716940 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060404.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7068 bytes_read=15717 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999317 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1243 bytes_read=6128 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000357 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.25 cputime=5.545 memavail=716940 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060405.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7074 bytes_read=15845 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1249 bytes_read=6144 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000359 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.25 cputime=5.568 memavail=716940 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060406.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7080 bytes_read=15964 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1255 bytes_read=6160 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.25 cputime=5.590 memavail=716944 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060407.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7086 bytes_read=16070 bytes_retransmit=9 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1261 bytes_read=6176 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.23 cputime=5.612 memavail=716692 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060408.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7092 bytes_read=16206 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1267 bytes_read=6203 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000375 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.23 cputime=5.635 memavail=716440 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060409.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7098 bytes_read=16312 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1273 bytes_read=6219 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000372 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.23 cputime=5.657 memavail=716440 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060410.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7104 bytes_read=16418 bytes_retransmit=9 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1279 bytes_read=6235 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.23 cputime=5.680 memavail=716440 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060411.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7110 bytes_read=16567 bytes_retransmit=9 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1285 bytes_read=6251 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.23 cputime=5.703 memavail=716204 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060412.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7116 bytes_read=16673 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1291 bytes_read=6267 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.21 cputime=5.725 memavail=716204 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060413.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7122 bytes_read=16779 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1297 bytes_read=6294 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=5.746 memavail=716204 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060414.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7128 bytes_read=16915 bytes_retransmit=9 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1303 bytes_read=6310 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=5.766 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060415.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7134 bytes_read=17021 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1309 bytes_read=6326 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=5.786 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060416.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7146 bytes_read=17127 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=549 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1315 bytes_read=6342 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000354 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=5.807 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060417.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7152 bytes_read=17292 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999318 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1321 bytes_read=6358 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000352 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=5.829 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060418.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7158 bytes_read=17398 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999318 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1327 bytes_read=6385 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000292 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=5.850 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060419.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7164 bytes_read=17504 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1333 bytes_read=6401 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000306 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=5.871 memavail=715956 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060420.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7170 bytes_read=17640 bytes_retransmit=9 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999318 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1339 bytes_read=6417 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000319 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=5.891 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060421.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7176 bytes_read=17746 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1345 bytes_read=6433 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000327 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=5.912 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060422.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7182 bytes_read=17865 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1351 bytes_read=6449 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000337 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=5.933 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060423.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7188 bytes_read=18001 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1357 bytes_read=6476 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000340 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=5.954 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060424.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7194 bytes_read=18107 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1363 bytes_read=6492 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=5.974 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060425.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7200 bytes_read=18213 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1369 bytes_read=6508 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=5.995 memavail=715960 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060426.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7206 bytes_read=18349 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1375 bytes_read=6524 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000336 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=6.015 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060427.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7212 bytes_read=18468 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1381 bytes_read=6540 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.16 cputime=6.036 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060428.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7218 bytes_read=18574 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1387 bytes_read=6567 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=6.057 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060429.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7224 bytes_read=18710 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1393 bytes_read=6583 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=6.078 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060430.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7230 bytes_read=18816 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1399 bytes_read=6599 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.16 cputime=6.099 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060431.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7236 bytes_read=18922 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1405 bytes_read=6615 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=6.120 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2060432.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7242 bytes_read=19071 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1411 bytes_read=6631 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000324 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=6.142 memavail=715964 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060433.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7248 bytes_read=19177 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1417 bytes_read=6658 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000335 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=6.162 memavail=715968 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060434.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7254 bytes_read=19298 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1423 bytes_read=6674 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.15 cputime=6.184 memavail=715968 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060435.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7260 bytes_read=19419 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1429 bytes_read=6690 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=6.205 memavail=715968 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060436.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7266 bytes_read=19525 bytes_retransmit=9 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1435 bytes_read=6706 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=6.226 memavail=715968 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060437.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7272 bytes_read=19659 bytes_retransmit=9 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1441 bytes_read=6722 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=6.248 memavail=715968 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060438.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7278 bytes_read=19780 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1447 bytes_read=6749 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=6.268 memavail=715972 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060439.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7284 bytes_read=19886 bytes_retransmit=9 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1453 bytes_read=6765 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000324 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.14 cputime=6.289 memavail=715972 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060440.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7290 bytes_read=20007 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1459 bytes_read=6781 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000330 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=6.311 memavail=715972 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060441.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7296 bytes_read=20128 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1465 bytes_read=6797 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.14 cputime=6.331 memavail=715976 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060442.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7302 bytes_read=20247 bytes_retransmit=9 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999351 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1471 bytes_read=6813 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=6.351 memavail=715976 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060443.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7308 bytes_read=20368 bytes_retransmit=9 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999353 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1477 bytes_read=6840 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000324 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.13 cputime=6.373 memavail=715976 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060444.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7314 bytes_read=20489 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999350 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1483 bytes_read=6856 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000327 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=6.393 memavail=721036 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060445.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7320 bytes_read=20595 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999347 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1489 bytes_read=6872 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000336 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=6.414 memavail=721132 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060446.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7326 bytes_read=20716 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1495 bytes_read=6888 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=6.434 memavail=721132 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060447.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7332 bytes_read=20850 bytes_retransmit=9 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1501 bytes_read=6904 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=6.456 memavail=724636 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060448.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7338 bytes_read=20956 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1507 bytes_read=6931 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=6.476 memavail=724636 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060449.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7344 bytes_read=21077 bytes_retransmit=9 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1513 bytes_read=6947 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=6.498 memavail=724636 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060450.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7350 bytes_read=21198 bytes_retransmit=9 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1519 bytes_read=6963 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=6.517 memavail=724384 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060451.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7356 bytes_read=21304 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1525 bytes_read=6979 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.12 cputime=6.539 memavail=724384 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060452.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7362 bytes_read=21438 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1531 bytes_read=6995 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=6.559 memavail=724384 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060453.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7368 bytes_read=21557 bytes_retransmit=9 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1537 bytes_read=7022 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=6.580 memavail=724148 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060454.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7374 bytes_read=21656 bytes_retransmit=9 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1543 bytes_read=7038 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=6.600 memavail=724148 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060455.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7380 bytes_read=21769 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1549 bytes_read=7054 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000362 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=6.621 memavail=724148 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060456.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7386 bytes_read=21882 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1555 bytes_read=7070 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=6.642 memavail=724148 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060457.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7392 bytes_read=22001 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1561 bytes_read=7086 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=6.662 memavail=723676 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060458.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7398 bytes_read=22122 bytes_retransmit=9 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1567 bytes_read=7113 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=6.683 memavail=723676 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060459.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7404 bytes_read=22243 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1573 bytes_read=7129 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=6.704 memavail=723172 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060460.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7410 bytes_read=22349 bytes_retransmit=9 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1579 bytes_read=7145 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=6.726 memavail=723172 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060461.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7416 bytes_read=22470 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1585 bytes_read=7161 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=6.748 memavail=723172 print_time=203.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=reset
Sending BLTOUCH_DEBUG COMMAND=pin_down
Sending BLTOUCH_DEBUG COMMAND=touch_mode
Stats 2060712.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=8961 bytes_read=52207 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=36 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3121 bytes_read=11795 bytes_retransmit=9 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.835 memavail=721284 print_time=516.613 buffer_time=2.714 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060713.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=8990 bytes_read=52318 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=20 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3127 bytes_read=11811 bytes_retransmit=9 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.857 memavail=721284 print_time=516.613 buffer_time=1.712 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2060714.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9019 bytes_read=52429 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=2 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3133 bytes_read=11827 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.879 memavail=721036 print_time=516.613 buffer_time=0.712 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
probe: open
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 2060715.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9055 bytes_read=52598 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3139 bytes_read=11843 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.909 memavail=721036 print_time=517.872 buffer_time=0.970 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
probe: open
Sending BLTOUCH_DEBUG COMMAND=self_test
Stats 2060716.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9091 bytes_read=52724 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3145 bytes_read=11859 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000339 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.937 memavail=721036 print_time=519.130 buffer_time=1.227 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060717.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9110 bytes_read=52835 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3151 bytes_read=11886 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000341 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=11.958 memavail=721036 print_time=519.130 buffer_time=0.226 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060718.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9116 bytes_read=52971 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3157 bytes_read=11902 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=11.980 memavail=721040 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060719.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9122 bytes_read=53077 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3163 bytes_read=11918 bytes_retransmit=9 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.12 cputime=12.000 memavail=721040 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060720.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9128 bytes_read=53196 bytes_retransmit=9 bytes_invalid=0 send_seq=866 receive_seq=866 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3169 bytes_read=11934 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=12.021 memavail=721040 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060721.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9134 bytes_read=53332 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999347 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3175 bytes_read=11950 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=12.042 memavail=721040 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060722.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9140 bytes_read=53438 bytes_retransmit=9 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3181 bytes_read=11977 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000332 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=12.063 memavail=721040 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060723.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9152 bytes_read=53544 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=869 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3187 bytes_read=11993 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000337 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=12.085 memavail=721044 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060724.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9158 bytes_read=53696 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3193 bytes_read=12009 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.11 cputime=12.107 memavail=721044 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060725.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9164 bytes_read=53815 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3199 bytes_read=12025 bytes_retransmit=9 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=12.128 memavail=721044 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060726.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9170 bytes_read=53936 bytes_retransmit=9 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3205 bytes_read=12041 bytes_retransmit=9 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=12.150 memavail=720804 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060727.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9176 bytes_read=54057 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3211 bytes_read=12068 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.11 cputime=12.171 memavail=720804 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060728.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9182 bytes_read=54163 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999352 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3217 bytes_read=12084 bytes_retransmit=9 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.26 cputime=12.191 memavail=720804 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060729.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9188 bytes_read=54284 bytes_retransmit=9 bytes_invalid=0 send_seq=876 receive_seq=876 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999350 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3223 bytes_read=12100 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000325 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.26 cputime=12.214 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060730.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9194 bytes_read=54418 bytes_retransmit=9 bytes_invalid=0 send_seq=877 receive_seq=877 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3229 bytes_read=12116 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000336 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.26 cputime=12.234 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060731.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9200 bytes_read=54524 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3235 bytes_read=12132 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.26 cputime=12.255 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060732.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9206 bytes_read=54645 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3241 bytes_read=12159 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.26 cputime=12.277 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060733.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9212 bytes_read=54766 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3247 bytes_read=12175 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=12.299 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060734.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9218 bytes_read=54872 bytes_retransmit=9 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3253 bytes_read=12191 bytes_retransmit=9 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.24 cputime=12.319 memavail=720808 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060735.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9224 bytes_read=55006 bytes_retransmit=9 bytes_invalid=0 send_seq=882 receive_seq=882 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3259 bytes_read=12207 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000362 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=12.342 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060736.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9230 bytes_read=55127 bytes_retransmit=9 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3265 bytes_read=12223 bytes_retransmit=9 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000367 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=12.364 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060737.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9236 bytes_read=55233 bytes_retransmit=9 bytes_invalid=0 send_seq=884 receive_seq=884 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3271 bytes_read=12250 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000366 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=12.385 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060738.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9242 bytes_read=55354 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3277 bytes_read=12266 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000364 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.22 cputime=12.407 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060739.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9248 bytes_read=55475 bytes_retransmit=9 bytes_invalid=0 send_seq=886 receive_seq=886 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3283 bytes_read=12282 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000364 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=12.428 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060740.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9254 bytes_read=55594 bytes_retransmit=9 bytes_invalid=0 send_seq=887 receive_seq=887 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3289 bytes_read=12298 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000365 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=12.449 memavail=720812 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060741.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9260 bytes_read=55715 bytes_retransmit=9 bytes_invalid=0 send_seq=888 receive_seq=888 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3295 bytes_read=12314 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000364 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.22 cputime=12.471 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060742.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9266 bytes_read=55836 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3301 bytes_read=12341 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000367 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=12.493 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060743.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9272 bytes_read=55942 bytes_retransmit=9 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3307 bytes_read=12357 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.20 cputime=12.514 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060744.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9278 bytes_read=56063 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3313 bytes_read=12373 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000362 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.20 cputime=12.536 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060745.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9284 bytes_read=56197 bytes_retransmit=9 bytes_invalid=0 send_seq=892 receive_seq=892 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3319 bytes_read=12389 bytes_retransmit=9 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=37.6 sysload=0.20 cputime=12.559 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060746.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9290 bytes_read=56303 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3325 bytes_read=12405 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.20 cputime=12.580 memavail=720576 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060747.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9296 bytes_read=56424 bytes_retransmit=9 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3331 bytes_read=12432 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.20 cputime=12.602 memavail=720328 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060748.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9302 bytes_read=56545 bytes_retransmit=9 bytes_invalid=0 send_seq=895 receive_seq=895 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3337 bytes_read=12448 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=12.623 memavail=720328 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060749.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9308 bytes_read=56651 bytes_retransmit=9 bytes_invalid=0 send_seq=896 receive_seq=896 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3343 bytes_read=12464 bytes_retransmit=9 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=12.645 memavail=720328 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060750.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9314 bytes_read=56785 bytes_retransmit=9 bytes_invalid=0 send_seq=897 receive_seq=897 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3349 bytes_read=12480 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.18 cputime=12.667 memavail=720332 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060751.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9320 bytes_read=56906 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3355 bytes_read=12496 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.18 cputime=12.689 memavail=720332 print_time=519.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=reset
Sending BLTOUCH_DEBUG COMMAND=pin_down
Stats 2060752.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9349 bytes_read=57017 bytes_retransmit=9 bytes_invalid=0 send_seq=900 receive_seq=900 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3361 bytes_read=12523 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.18 cputime=12.718 memavail=720332 print_time=555.259 buffer_time=1.332 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060753.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9378 bytes_read=57143 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3367 bytes_read=12539 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=12.740 memavail=720332 print_time=555.259 buffer_time=0.331 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060754.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9384 bytes_read=57264 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3373 bytes_read=12555 bytes_retransmit=9 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.17 cputime=12.761 memavail=720332 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060755.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9390 bytes_read=57383 bytes_retransmit=9 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3379 bytes_read=12571 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=12.784 memavail=720332 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060756.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9396 bytes_read=57504 bytes_retransmit=9 bytes_invalid=0 send_seq=905 receive_seq=905 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3385 bytes_read=12587 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.17 cputime=12.805 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060757.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9402 bytes_read=57625 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3391 bytes_read=12614 bytes_retransmit=9 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=12.827 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060758.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9408 bytes_read=57731 bytes_retransmit=9 bytes_invalid=0 send_seq=907 receive_seq=907 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3397 bytes_read=12630 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=12.844 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060759.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=9414 bytes_read=57852 bytes_retransmit=9 bytes_invalid=0 send_seq=908 receive_seq=908 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3403 bytes_read=12646 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=12.865 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060760.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9420 bytes_read=57982 bytes_retransmit=9 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3409 bytes_read=12662 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=12.886 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060761.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9426 bytes_read=58081 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3415 bytes_read=12678 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000330 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=12.908 memavail=720084 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060762.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9432 bytes_read=58194 bytes_retransmit=9 bytes_invalid=0 send_seq=911 receive_seq=911 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3421 bytes_read=12705 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000334 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=12.929 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060763.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9438 bytes_read=58310 bytes_retransmit=9 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3427 bytes_read=12721 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=12.949 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060764.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9444 bytes_read=58416 bytes_retransmit=9 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3433 bytes_read=12737 bytes_retransmit=9 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=12.970 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060765.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9450 bytes_read=58550 bytes_retransmit=9 bytes_invalid=0 send_seq=914 receive_seq=914 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3439 bytes_read=12753 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=12.992 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060766.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9456 bytes_read=58671 bytes_retransmit=9 bytes_invalid=0 send_seq=915 receive_seq=915 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3445 bytes_read=12769 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.14 cputime=13.014 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060767.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9462 bytes_read=58777 bytes_retransmit=9 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3451 bytes_read=12796 bytes_retransmit=9 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=13.035 memavail=720088 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060768.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9468 bytes_read=58898 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3457 bytes_read=12812 bytes_retransmit=9 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=13.055 memavail=723780 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060769.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9474 bytes_read=59019 bytes_retransmit=9 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3463 bytes_read=12828 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=13.076 memavail=723780 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060770.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9480 bytes_read=59138 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3475 bytes_read=12860 bytes_retransmit=9 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=13.098 memavail=723780 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060771.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9486 bytes_read=59259 bytes_retransmit=9 bytes_invalid=0 send_seq=920 receive_seq=920 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3481 bytes_read=12876 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000362 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=13.118 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060772.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9492 bytes_read=59380 bytes_retransmit=9 bytes_invalid=0 send_seq=921 receive_seq=921 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3487 bytes_read=12903 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=13.141 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060773.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9498 bytes_read=59486 bytes_retransmit=9 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3493 bytes_read=12919 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=13.161 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060774.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9504 bytes_read=59607 bytes_retransmit=9 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3499 bytes_read=12935 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=13.182 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060775.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9510 bytes_read=59741 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3505 bytes_read=12951 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=13.203 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060776.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9516 bytes_read=59847 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999323 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3511 bytes_read=12967 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=37.6 sysload=0.12 cputime=13.224 memavail=723784 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060777.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9522 bytes_read=59968 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3517 bytes_read=12994 bytes_retransmit=9 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=13.245 memavail=723788 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060778.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9528 bytes_read=60089 bytes_retransmit=9 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3523 bytes_read=13010 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=13.267 memavail=723520 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060779.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9534 bytes_read=60195 bytes_retransmit=9 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3529 bytes_read=13026 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=13.288 memavail=723520 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060780.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9540 bytes_read=60329 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3535 bytes_read=13042 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=13.310 memavail=723520 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060781.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9546 bytes_read=60450 bytes_retransmit=9 bytes_invalid=0 send_seq=930 receive_seq=930 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3541 bytes_read=13058 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000336 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=13.331 memavail=723520 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060782.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9552 bytes_read=60556 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3547 bytes_read=13085 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000338 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=13.352 memavail=723520 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060783.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9558 bytes_read=60677 bytes_retransmit=9 bytes_invalid=0 send_seq=932 receive_seq=932 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3553 bytes_read=13101 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000340 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=13.374 memavail=723524 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060784.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9564 bytes_read=60798 bytes_retransmit=9 bytes_invalid=0 send_seq=933 receive_seq=933 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3559 bytes_read=13117 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000327 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=13.395 memavail=723524 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060785.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9576 bytes_read=60933 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3565 bytes_read=13133 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000329 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=13.417 memavail=723524 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060786.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9582 bytes_read=61054 bytes_retransmit=9 bytes_invalid=0 send_seq=936 receive_seq=936 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3571 bytes_read=13149 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000339 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=13.439 memavail=723524 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060787.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9588 bytes_read=61175 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3577 bytes_read=13176 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000325 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=13.460 memavail=723524 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060788.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9594 bytes_read=61281 bytes_retransmit=9 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3583 bytes_read=13192 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000337 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=13.482 memavail=723528 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060789.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9600 bytes_read=61402 bytes_retransmit=9 bytes_invalid=0 send_seq=939 receive_seq=939 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3589 bytes_read=13208 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=13.503 memavail=723276 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060790.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9606 bytes_read=61523 bytes_retransmit=9 bytes_invalid=0 send_seq=940 receive_seq=940 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3595 bytes_read=13224 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=13.525 memavail=723276 print_time=555.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 2060791.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9627 bytes_read=61647 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3601 bytes_read=13240 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=13.552 memavail=723276 print_time=594.026 buffer_time=1.076 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060792.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9646 bytes_read=61773 bytes_retransmit=9 bytes_invalid=0 send_seq=944 receive_seq=944 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3607 bytes_read=13267 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=13.575 memavail=723024 print_time=594.026 buffer_time=0.076 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060793.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9652 bytes_read=61894 bytes_retransmit=9 bytes_invalid=0 send_seq=945 receive_seq=945 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3613 bytes_read=13283 bytes_retransmit=9 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=13.597 memavail=723024 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060794.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9658 bytes_read=62000 bytes_retransmit=9 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3619 bytes_read=13299 bytes_retransmit=9 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=13.617 memavail=723024 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060795.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9664 bytes_read=62121 bytes_retransmit=9 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3625 bytes_read=13315 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=13.639 memavail=722788 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060796.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9670 bytes_read=62255 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3631 bytes_read=13331 bytes_retransmit=9 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=13.661 memavail=722788 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060797.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9676 bytes_read=62361 bytes_retransmit=9 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3637 bytes_read=13358 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=13.681 memavail=722788 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060798.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9682 bytes_read=62482 bytes_retransmit=9 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3643 bytes_read=13374 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=13.702 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060799.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9688 bytes_read=62603 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3649 bytes_read=13390 bytes_retransmit=9 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.08 cputime=13.723 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060800.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9694 bytes_read=62709 bytes_retransmit=9 bytes_invalid=0 send_seq=952 receive_seq=952 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3655 bytes_read=13406 bytes_retransmit=9 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=13.743 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060801.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9700 bytes_read=62843 bytes_retransmit=9 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3661 bytes_read=13422 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=13.765 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060802.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9706 bytes_read=62964 bytes_retransmit=9 bytes_invalid=0 send_seq=954 receive_seq=954 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3667 bytes_read=13449 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=13.786 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060803.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9712 bytes_read=63070 bytes_retransmit=9 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3673 bytes_read=13465 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.807 memavail=722792 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060804.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9718 bytes_read=63191 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3679 bytes_read=13481 bytes_retransmit=9 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.828 memavail=722796 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060805.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9724 bytes_read=63312 bytes_retransmit=9 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3685 bytes_read=13497 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.848 memavail=722796 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060806.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9730 bytes_read=63431 bytes_retransmit=9 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3691 bytes_read=13513 bytes_retransmit=9 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.869 memavail=722796 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060807.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9736 bytes_read=63552 bytes_retransmit=9 bytes_invalid=0 send_seq=959 receive_seq=959 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3697 bytes_read=13540 bytes_retransmit=9 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.892 memavail=722544 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060808.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9742 bytes_read=63673 bytes_retransmit=9 bytes_invalid=0 send_seq=960 receive_seq=960 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3703 bytes_read=13556 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.913 memavail=722544 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060809.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9748 bytes_read=63779 bytes_retransmit=9 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3709 bytes_read=13572 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=13.933 memavail=722544 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060810.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9754 bytes_read=63900 bytes_retransmit=9 bytes_invalid=0 send_seq=962 receive_seq=962 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3715 bytes_read=13588 bytes_retransmit=9 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.954 memavail=722056 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060811.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9760 bytes_read=64030 bytes_retransmit=9 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3721 bytes_read=13604 bytes_retransmit=9 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.976 memavail=722056 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060812.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9766 bytes_read=64129 bytes_retransmit=9 bytes_invalid=0 send_seq=964 receive_seq=964 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3727 bytes_read=13631 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=13.997 memavail=722056 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060813.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9772 bytes_read=64242 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3733 bytes_read=13647 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.018 memavail=721816 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060814.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9778 bytes_read=64357 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3739 bytes_read=13663 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.039 memavail=721816 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060815.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9784 bytes_read=64463 bytes_retransmit=9 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3745 bytes_read=13679 bytes_retransmit=9 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000338 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.060 memavail=721816 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060816.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9790 bytes_read=64597 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3751 bytes_read=13695 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.082 memavail=721820 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060817.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9796 bytes_read=64718 bytes_retransmit=9 bytes_invalid=0 send_seq=969 receive_seq=969 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3757 bytes_read=13722 bytes_retransmit=9 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.104 memavail=721820 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060818.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9802 bytes_read=64824 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3763 bytes_read=13738 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.125 memavail=721568 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060819.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9808 bytes_read=64945 bytes_retransmit=9 bytes_invalid=0 send_seq=971 receive_seq=971 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3769 bytes_read=13754 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.06 cputime=14.146 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060820.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9814 bytes_read=65066 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3775 bytes_read=13770 bytes_retransmit=9 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.167 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060821.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9820 bytes_read=65185 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3781 bytes_read=13786 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=14.188 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060822.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9826 bytes_read=65306 bytes_retransmit=9 bytes_invalid=0 send_seq=974 receive_seq=974 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3787 bytes_read=13813 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.06 cputime=14.211 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060823.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9832 bytes_read=65427 bytes_retransmit=9 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3793 bytes_read=13829 bytes_retransmit=9 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.234 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060824.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9838 bytes_read=65533 bytes_retransmit=9 bytes_invalid=0 send_seq=976 receive_seq=976 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3799 bytes_read=13845 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.257 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060825.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9844 bytes_read=65654 bytes_retransmit=9 bytes_invalid=0 send_seq=977 receive_seq=977 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3805 bytes_read=13861 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.281 memavail=721572 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060826.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9850 bytes_read=65788 bytes_retransmit=9 bytes_invalid=0 send_seq=978 receive_seq=978 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3811 bytes_read=13877 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.302 memavail=721576 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060827.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9856 bytes_read=65894 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3817 bytes_read=13904 bytes_retransmit=9 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.323 memavail=721576 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060828.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9862 bytes_read=66015 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3823 bytes_read=13920 bytes_retransmit=9 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.05 cputime=14.345 memavail=721576 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060829.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9868 bytes_read=66136 bytes_retransmit=9 bytes_invalid=0 send_seq=981 receive_seq=981 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3829 bytes_read=13936 bytes_retransmit=9 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.05 cputime=14.366 memavail=721576 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060830.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9874 bytes_read=66242 bytes_retransmit=9 bytes_invalid=0 send_seq=982 receive_seq=982 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999320 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3835 bytes_read=13952 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.386 memavail=721576 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060831.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9880 bytes_read=66376 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3847 bytes_read=13984 bytes_retransmit=9 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.409 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060832.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9886 bytes_read=66497 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999322 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3853 bytes_read=14011 bytes_retransmit=9 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.05 cputime=14.430 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060833.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9892 bytes_read=66603 bytes_retransmit=9 bytes_invalid=0 send_seq=985 receive_seq=985 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3859 bytes_read=14027 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.452 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060834.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9898 bytes_read=66724 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3865 bytes_read=14043 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.472 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060835.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9904 bytes_read=66845 bytes_retransmit=9 bytes_invalid=0 send_seq=987 receive_seq=987 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3871 bytes_read=14059 bytes_retransmit=9 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.493 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060836.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9910 bytes_read=66964 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3877 bytes_read=14075 bytes_retransmit=9 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.514 memavail=721340 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060837.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9916 bytes_read=67085 bytes_retransmit=9 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3883 bytes_read=14102 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000328 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.536 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060838.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9922 bytes_read=67206 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3889 bytes_read=14118 bytes_retransmit=9 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000335 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.558 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060839.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9928 bytes_read=67312 bytes_retransmit=9 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3895 bytes_read=14134 bytes_retransmit=9 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000339 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.579 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060840.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9934 bytes_read=67448 bytes_retransmit=9 bytes_invalid=0 send_seq=992 receive_seq=992 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3901 bytes_read=14150 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.601 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060841.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9940 bytes_read=67567 bytes_retransmit=9 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3907 bytes_read=14166 bytes_retransmit=9 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.622 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060842.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9946 bytes_read=67673 bytes_retransmit=9 bytes_invalid=0 send_seq=994 receive_seq=994 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3913 bytes_read=14193 bytes_retransmit=9 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.644 memavail=721344 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2060843.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9952 bytes_read=67809 bytes_retransmit=9 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3919 bytes_read=14209 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.666 memavail=721348 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060844.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9958 bytes_read=67915 bytes_retransmit=9 bytes_invalid=0 send_seq=996 receive_seq=996 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3925 bytes_read=14225 bytes_retransmit=9 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000330 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.686 memavail=721348 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060845.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=9964 bytes_read=68021 bytes_retransmit=9 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3931 bytes_read=14241 bytes_retransmit=9 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000333 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.707 memavail=721348 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060846.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9970 bytes_read=68170 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3937 bytes_read=14257 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000339 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.729 memavail=721352 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060847.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9982 bytes_read=68292 bytes_retransmit=9 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3943 bytes_read=14284 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.04 cputime=14.750 memavail=721352 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060848.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9988 bytes_read=68398 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3949 bytes_read=14300 bytes_retransmit=9 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.03 cputime=14.772 memavail=721100 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060849.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=9994 bytes_read=68534 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3955 bytes_read=14316 bytes_retransmit=9 bytes_invalid=0 send_seq=627 receive_seq=627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.03 cputime=14.794 memavail=721100 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060850.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=10000 bytes_read=68640 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3961 bytes_read=14332 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.03 cputime=14.816 memavail=721100 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060851.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=10006 bytes_read=68759 bytes_retransmit=9 bytes_invalid=0 send_seq=1004 receive_seq=1004 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3967 bytes_read=14348 bytes_retransmit=9 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.03 cputime=14.834 memavail=721100 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2060852.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=10012 bytes_read=68895 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=3973 bytes_read=14375 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.03 cputime=14.857 memavail=721104 print_time=594.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061394.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13306 bytes_read=132919 bytes_retransmit=9 bytes_invalid=0 send_seq=1554 receive_seq=1554 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7273 bytes_read=24317 bytes_retransmit=9 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=25.945 memavail=719340 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061395.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13312 bytes_read=133040 bytes_retransmit=9 bytes_invalid=0 send_seq=1555 receive_seq=1555 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7279 bytes_read=24333 bytes_retransmit=9 bytes_invalid=0 send_seq=1181 receive_seq=1181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.15 cputime=25.966 memavail=719340 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061396.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13318 bytes_read=133161 bytes_retransmit=9 bytes_invalid=0 send_seq=1556 receive_seq=1556 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7285 bytes_read=24349 bytes_retransmit=9 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.15 cputime=25.988 memavail=719340 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061397.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13324 bytes_read=133267 bytes_retransmit=9 bytes_invalid=0 send_seq=1557 receive_seq=1557 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7291 bytes_read=24365 bytes_retransmit=9 bytes_invalid=0 send_seq=1183 receive_seq=1183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=26.009 memavail=719340 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2061398.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13330 bytes_read=133401 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7297 bytes_read=24392 bytes_retransmit=9 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.15 cputime=26.031 memavail=719340 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061399.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13342 bytes_read=133522 bytes_retransmit=9 bytes_invalid=0 send_seq=1560 receive_seq=1559 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7303 bytes_read=24408 bytes_retransmit=9 bytes_invalid=0 send_seq=1185 receive_seq=1185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.13 cputime=26.052 memavail=718836 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061400.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13348 bytes_read=133644 bytes_retransmit=9 bytes_invalid=0 send_seq=1561 receive_seq=1561 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7309 bytes_read=24424 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=26.074 memavail=718840 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061401.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13354 bytes_read=133765 bytes_retransmit=9 bytes_invalid=0 send_seq=1562 receive_seq=1562 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7315 bytes_read=24440 bytes_retransmit=9 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=26.094 memavail=718840 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061402.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13360 bytes_read=133886 bytes_retransmit=9 bytes_invalid=0 send_seq=1563 receive_seq=1563 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7321 bytes_read=24456 bytes_retransmit=9 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=26.115 memavail=718840 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061403.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13366 bytes_read=134005 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7327 bytes_read=24483 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=26.136 memavail=718840 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061404.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13372 bytes_read=134126 bytes_retransmit=9 bytes_invalid=0 send_seq=1565 receive_seq=1565 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7333 bytes_read=24499 bytes_retransmit=9 bytes_invalid=0 send_seq=1190 receive_seq=1190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=26.158 memavail=718840 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061405.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13378 bytes_read=134247 bytes_retransmit=9 bytes_invalid=0 send_seq=1566 receive_seq=1566 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7339 bytes_read=24515 bytes_retransmit=9 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=26.179 memavail=718104 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061406.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13384 bytes_read=134353 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7345 bytes_read=24531 bytes_retransmit=9 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=26.200 memavail=718104 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061407.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13390 bytes_read=134474 bytes_retransmit=9 bytes_invalid=0 send_seq=1568 receive_seq=1568 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7351 bytes_read=24547 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=26.221 memavail=718104 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061408.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13396 bytes_read=134608 bytes_retransmit=9 bytes_invalid=0 send_seq=1569 receive_seq=1569 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7357 bytes_read=24574 bytes_retransmit=9 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.12 cputime=26.243 memavail=718108 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061409.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13402 bytes_read=134714 bytes_retransmit=9 bytes_invalid=0 send_seq=1570 receive_seq=1570 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7363 bytes_read=24590 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.11 cputime=26.263 memavail=717856 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061410.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13408 bytes_read=134835 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7369 bytes_read=24606 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.11 cputime=26.284 memavail=717856 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061411.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13414 bytes_read=134956 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7375 bytes_read=24622 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=26.307 memavail=717856 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061412.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13420 bytes_read=135062 bytes_retransmit=9 bytes_invalid=0 send_seq=1573 receive_seq=1573 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7381 bytes_read=24638 bytes_retransmit=9 bytes_invalid=0 send_seq=1198 receive_seq=1198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.11 cputime=26.327 memavail=717856 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061413.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13426 bytes_read=135196 bytes_retransmit=9 bytes_invalid=0 send_seq=1574 receive_seq=1574 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7387 bytes_read=24665 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=26.349 memavail=717856 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061414.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13432 bytes_read=135317 bytes_retransmit=9 bytes_invalid=0 send_seq=1575 receive_seq=1575 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7393 bytes_read=24681 bytes_retransmit=9 bytes_invalid=0 send_seq=1200 receive_seq=1200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.370 memavail=717860 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061415.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13438 bytes_read=135423 bytes_retransmit=9 bytes_invalid=0 send_seq=1576 receive_seq=1576 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7399 bytes_read=24697 bytes_retransmit=9 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.10 cputime=26.392 memavail=717860 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061416.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13444 bytes_read=135544 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7405 bytes_read=24713 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.413 memavail=717860 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061417.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13450 bytes_read=135665 bytes_retransmit=9 bytes_invalid=0 send_seq=1578 receive_seq=1578 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7411 bytes_read=24729 bytes_retransmit=9 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=26.434 memavail=717356 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061418.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13456 bytes_read=135784 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7417 bytes_read=24756 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000346 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.457 memavail=717356 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061419.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13462 bytes_read=135905 bytes_retransmit=9 bytes_invalid=0 send_seq=1580 receive_seq=1580 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7423 bytes_read=24772 bytes_retransmit=9 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.478 memavail=717356 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061420.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13468 bytes_read=136026 bytes_retransmit=9 bytes_invalid=0 send_seq=1581 receive_seq=1581 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7429 bytes_read=24788 bytes_retransmit=9 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000334 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.500 memavail=717360 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061421.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13474 bytes_read=136132 bytes_retransmit=9 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7435 bytes_read=24804 bytes_retransmit=9 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.522 memavail=717360 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061422.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13480 bytes_read=136253 bytes_retransmit=9 bytes_invalid=0 send_seq=1583 receive_seq=1583 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7441 bytes_read=24820 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000339 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=26.543 memavail=717360 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061423.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13486 bytes_read=136387 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7447 bytes_read=24847 bytes_retransmit=9 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000340 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=26.565 memavail=717360 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061424.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13492 bytes_read=136493 bytes_retransmit=9 bytes_invalid=0 send_seq=1585 receive_seq=1585 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7453 bytes_read=24863 bytes_retransmit=9 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=26.587 memavail=717360 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061425.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13498 bytes_read=136626 bytes_retransmit=9 bytes_invalid=0 send_seq=1586 receive_seq=1586 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7459 bytes_read=24879 bytes_retransmit=9 bytes_invalid=0 send_seq=1211 receive_seq=1211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=26.609 memavail=717364 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061426.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13504 bytes_read=136725 bytes_retransmit=9 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7465 bytes_read=24895 bytes_retransmit=9 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=26.630 memavail=721772 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061427.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13510 bytes_read=136824 bytes_retransmit=9 bytes_invalid=0 send_seq=1588 receive_seq=1588 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7471 bytes_read=24911 bytes_retransmit=9 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.09 cputime=26.652 memavail=721772 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061428.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13516 bytes_read=136966 bytes_retransmit=9 bytes_invalid=0 send_seq=1589 receive_seq=1589 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7477 bytes_read=24938 bytes_retransmit=9 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=26.675 memavail=721772 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061429.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13522 bytes_read=137072 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7483 bytes_read=24954 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000350 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.08 cputime=26.696 memavail=721548 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061430.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13528 bytes_read=137178 bytes_retransmit=9 bytes_invalid=0 send_seq=1591 receive_seq=1591 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7489 bytes_read=24970 bytes_retransmit=9 bytes_invalid=0 send_seq=1216 receive_seq=1216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.08 cputime=26.718 memavail=721548 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061431.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13534 bytes_read=137314 bytes_retransmit=9 bytes_invalid=0 send_seq=1592 receive_seq=1592 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7495 bytes_read=24986 bytes_retransmit=9 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000344 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.08 cputime=26.741 memavail=721548 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061432.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13540 bytes_read=137420 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7501 bytes_read=25002 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=26.762 memavail=721548 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061433.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=13546 bytes_read=137526 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7507 bytes_read=25029 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000347 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.08 cputime=26.784 memavail=721552 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061434.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13552 bytes_read=137675 bytes_retransmit=9 bytes_invalid=0 send_seq=1595 receive_seq=1595 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7513 bytes_read=25045 bytes_retransmit=9 bytes_invalid=0 send_seq=1220 receive_seq=1220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=26.807 memavail=721552 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061435.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13558 bytes_read=137781 bytes_retransmit=9 bytes_invalid=0 send_seq=1596 receive_seq=1596 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7519 bytes_read=25061 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.828 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061436.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13564 bytes_read=137887 bytes_retransmit=9 bytes_invalid=0 send_seq=1597 receive_seq=1597 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7525 bytes_read=25077 bytes_retransmit=9 bytes_invalid=0 send_seq=1222 receive_seq=1222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000354 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.849 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061437.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13570 bytes_read=138023 bytes_retransmit=9 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7531 bytes_read=25093 bytes_retransmit=9 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.871 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061438.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13576 bytes_read=138129 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7537 bytes_read=25120 bytes_retransmit=9 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.7 sysload=0.07 cputime=26.892 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061439.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13582 bytes_read=138248 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7543 bytes_read=25136 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.915 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061440.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13588 bytes_read=138384 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7549 bytes_read=25152 bytes_retransmit=9 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.937 memavail=721316 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061441.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13594 bytes_read=138490 bytes_retransmit=9 bytes_invalid=0 send_seq=1602 receive_seq=1602 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7555 bytes_read=25168 bytes_retransmit=9 bytes_invalid=0 send_seq=1227 receive_seq=1227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=26.958 memavail=721320 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2061442.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13600 bytes_read=138596 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7561 bytes_read=25184 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=26.979 memavail=721320 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061443.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13606 bytes_read=138732 bytes_retransmit=9 bytes_invalid=0 send_seq=1604 receive_seq=1604 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7567 bytes_read=25211 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000357 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=27.002 memavail=721320 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061444.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13612 bytes_read=138851 bytes_retransmit=9 bytes_invalid=0 send_seq=1605 receive_seq=1605 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7573 bytes_read=25227 bytes_retransmit=9 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.06 cputime=27.023 memavail=721068 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061445.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13618 bytes_read=138957 bytes_retransmit=9 bytes_invalid=0 send_seq=1606 receive_seq=1606 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7579 bytes_read=25243 bytes_retransmit=9 bytes_invalid=0 send_seq=1231 receive_seq=1231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000357 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.044 memavail=721068 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061446.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13624 bytes_read=139093 bytes_retransmit=9 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7585 bytes_read=25259 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.067 memavail=721068 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061447.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13630 bytes_read=139199 bytes_retransmit=9 bytes_invalid=0 send_seq=1608 receive_seq=1608 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7597 bytes_read=25291 bytes_retransmit=9 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.089 memavail=720816 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061448.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13636 bytes_read=139305 bytes_retransmit=9 bytes_invalid=0 send_seq=1609 receive_seq=1609 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7603 bytes_read=25318 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000337 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.111 memavail=720820 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061449.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13642 bytes_read=139454 bytes_retransmit=9 bytes_invalid=0 send_seq=1610 receive_seq=1610 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7609 bytes_read=25334 bytes_retransmit=9 bytes_invalid=0 send_seq=1236 receive_seq=1236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.134 memavail=720568 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061450.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13648 bytes_read=139560 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7615 bytes_read=25350 bytes_retransmit=9 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.06 cputime=27.155 memavail=720568 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061451.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13654 bytes_read=139666 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7621 bytes_read=25366 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.176 memavail=720568 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061452.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13660 bytes_read=139802 bytes_retransmit=9 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7627 bytes_read=25382 bytes_retransmit=9 bytes_invalid=0 send_seq=1239 receive_seq=1239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.06 cputime=27.199 memavail=720568 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2061453.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=13666 bytes_read=139908 bytes_retransmit=9 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=7633 bytes_read=25409 bytes_retransmit=9 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000347 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.06 cputime=27.221 memavail=720568 print_time=1194.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
b'Got EOF when reading from device'
Timeout with MCU 'mcu' (eventtime=2062075.560408)
Transition to shutdown state: Lost communication with MCU 'mcu'
Dumping gcode input 0 blocks
Dumping 20 requests for client 1964949544
Received 2060358.908617: b'{"id": 1919149056, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 2060359.154636: b'{"id": 1931317840, "method": "objects/list", "params": {}}'
Received 2060359.156469: b'{"id": 1931317840, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 2060359.418706: b'{"id": 1928533832, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 2060359.422282: b'{"id": 1928533832, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 2060359.425352: b'{"id": 1928533832, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 2060359.428600: b'{"id": 1928533832, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 2060359.434578: b'{"id": 1919696128, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 2060359.435183: b'{"id": 1919214328, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 2060359.656830: b'{"id": 1919696464, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_sensor Raspberry_Pi": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 2060359.910022: b'{"id": 1931317840, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_sensor Raspberry_Pi": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 2060375.803137: b'{"id": 1919150184, "method": "objects/query", "params": {"objects": {"gcode": ["commands"]}}}'
Received 2060375.803687: b'{"id": 1919150328, "method": "info", "params": {}}'
Received 2060375.804249: b'{"id": 1919150040, "method": "objects/list", "params": {}}'
Received 2060375.814948: b'{"id": 1919149608, "method": "objects/subscribe", "params": {"objects": {"gcode": null, "webhooks": null, "configfile": null, "mcu": null, "mcu PIS": null, "heaters": null, "heater_bed": null, "heater_fan hotend_fan": null, "fan": null, "probe": null, "bltouch": null, "gcode_move": null, "print_stats": null, "virtual_sdcard": null, "pause_resume": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro _CLIENT_LINEAR_MOVE": null, "bed_mesh": null, "gcode_macro TILT_ADJUST": null, "screws_tilt_adjust": null, "exclude_object": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "temperature_host Raspberry_Pi": null, "temperature_sensor Raspberry_Pi": null, "filament_switch_sensor e0_sensor": null, "query_endstops": null, "stepper_enable": null, "motion_report": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 2060376.178240: b'{"id": 1919149008, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 2060381.911166: b'{"id": 1919150112, "method": "gcode/script", "params": {"script": "G28"}}'
Received 2060712.118492: b'{"id": 1919150472, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=reset\\nBLTOUCH_DEBUG COMMAND=pin_down\\nBLTOUCH_DEBUG COMMAND=touch_mode\\nQUERY_PROBE\\nBLTOUCH_DEBUG COMMAND=pin_up\\nQUERY_PROBE\\nBLTOUCH_DEBUG COMMAND=self_test\\n"}}'
Received 2060751.763196: b'{"id": 1919149296, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=reset\\nBLTOUCH_DEBUG COMMAND=pin_down"}}'
Received 2060791.529096: b'{"id": 1919149656, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_up"}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[147.0, 154.0, 403.54249999999996, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (2060375.963087102, 0.0, 0.0)
Lost communication with MCU 'mcu'
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown

MCU 'PIS' shutdown: Command request
clocksync state: mcu_freq=12000000 last_clock=34654748597 clock_est=(2062046.797 34312073005 12000254.880) min_half_rtt=0.000146 min_rtt_time=2061347.698 time_avg=2062046.797(843.537) clock_avg=34312073005.294(10122662178.778) pred_variance=10587.799 clock_adj=(-1011.226 12000353.250)
Dumping serial stats: bytes_write=11431 bytes_read=36850 bytes_retransmit=9 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 2061978.854697 2061978.854697 6: seq: 1d, get_clock
Sent 1 2061979.839571 2061979.839571 6: seq: 1e, get_clock
Sent 2 2061980.824474 2061980.824474 6: seq: 1f, get_clock
Sent 3 2061981.808912 2061981.808912 6: seq: 10, get_clock
Sent 4 2061982.793667 2061982.793667 6: seq: 11, get_clock
Sent 5 2061983.778380 2061983.778380 6: seq: 12, get_clock
Sent 6 2061984.762429 2061984.762429 6: seq: 13, get_clock
Sent 7 2061985.747565 2061985.747565 6: seq: 14, get_clock
Sent 8 2061986.732440 2061986.732440 6: seq: 15, get_clock
Sent 9 2061987.716922 2061987.716922 6: seq: 16, get_clock
Sent 10 2061988.701976 2061988.701976 6: seq: 17, get_clock
Sent 11 2061989.686852 2061989.686852 6: seq: 18, get_clock
Sent 12 2061990.671811 2061990.671811 6: seq: 19, get_clock
Sent 13 2061991.656172 2061991.656172 6: seq: 1a, get_clock
Sent 14 2061992.640407 2061992.640407 6: seq: 1b, get_clock
Sent 15 2061993.624790 2061993.624790 6: seq: 1c, get_clock
Sent 16 2061994.609344 2061994.609344 6: seq: 1d, get_clock
Sent 17 2061995.594104 2061995.594104 6: seq: 1e, get_clock
Sent 18 2061996.579069 2061996.579069 6: seq: 1f, get_clock
Sent 19 2061997.563299 2061997.563299 6: seq: 10, get_clock
Sent 20 2061998.548269 2061998.548269 6: seq: 11, get_clock
Sent 21 2061999.533009 2061999.533009 6: seq: 12, get_clock
Sent 22 2062000.517387 2062000.517387 6: seq: 13, get_clock
Sent 23 2062001.502218 2062001.502218 6: seq: 14, get_clock
Sent 24 2062002.487298 2062002.487298 6: seq: 15, get_clock
Sent 25 2062003.471633 2062003.471633 6: seq: 16, get_clock
Sent 26 2062004.456035 2062004.456035 6: seq: 17, get_clock
Sent 27 2062005.440357 2062005.440357 6: seq: 18, get_clock
Sent 28 2062006.424605 2062006.424605 6: seq: 19, get_clock
Sent 29 2062007.409496 2062007.409496 6: seq: 1a, get_clock
Sent 30 2062008.394001 2062008.394001 6: seq: 1b, get_clock
Sent 31 2062009.378744 2062009.378744 6: seq: 1c, get_clock
Sent 32 2062010.362888 2062010.362888 6: seq: 1d, get_clock
Sent 33 2062011.347856 2062011.347856 6: seq: 1e, get_clock
Sent 34 2062012.332779 2062012.332779 6: seq: 1f, get_clock
Sent 35 2062013.317938 2062013.317938 6: seq: 10, get_clock
Sent 36 2062014.302541 2062014.302541 6: seq: 11, get_clock
Sent 37 2062015.287535 2062015.287535 6: seq: 12, get_clock
Sent 38 2062016.272542 2062016.272542 6: seq: 13, get_clock
Sent 39 2062017.256850 2062017.256850 6: seq: 14, get_clock
Sent 40 2062018.241312 2062018.241312 6: seq: 15, get_clock
Sent 41 2062019.225903 2062019.225903 6: seq: 16, get_clock
Sent 42 2062020.210843 2062020.210843 6: seq: 17, get_clock
Sent 43 2062021.195325 2062021.195325 6: seq: 18, get_clock
Sent 44 2062022.180262 2062022.180262 6: seq: 19, get_clock
Sent 45 2062023.164351 2062023.164351 6: seq: 1a, get_clock
Sent 46 2062024.149417 2062024.149417 6: seq: 1b, get_clock
Sent 47 2062025.133689 2062025.133689 6: seq: 1c, get_clock
Sent 48 2062026.118441 2062026.118441 6: seq: 1d, get_clock
Sent 49 2062027.103379 2062027.103379 6: seq: 1e, get_clock
Sent 50 2062028.088316 2062028.088316 6: seq: 1f, get_clock
Sent 51 2062029.072422 2062029.072422 6: seq: 10, get_clock
Sent 52 2062030.057296 2062030.057296 6: seq: 11, get_clock
Sent 53 2062031.041875 2062031.041875 6: seq: 12, get_clock
Sent 54 2062032.026097 2062032.026097 6: seq: 13, get_clock
Sent 55 2062033.010631 2062033.010631 6: seq: 14, get_clock
Sent 56 2062033.994833 2062033.994833 6: seq: 15, get_clock
Sent 57 2062034.979230 2062034.979230 6: seq: 16, get_clock
Sent 58 2062035.964606 2062035.964606 6: seq: 17, get_clock
Sent 59 2062036.948887 2062036.948887 6: seq: 18, get_clock
Sent 60 2062037.933783 2062037.933783 6: seq: 19, get_clock
Sent 61 2062038.918369 2062038.918369 6: seq: 1a, get_clock
Sent 62 2062039.902817 2062039.902817 6: seq: 1b, get_clock
Sent 63 2062040.888058 2062040.888058 6: seq: 1c, get_clock
Sent 64 2062041.872870 2062041.872870 6: seq: 1d, get_clock
Sent 65 2062042.857844 2062042.857844 6: seq: 1e, get_clock
Sent 66 2062043.842390 2062043.842390 6: seq: 1f, get_clock
Sent 67 2062044.826615 2062044.826615 6: seq: 10, get_clock
Sent 68 2062045.811285 2062045.811285 6: seq: 11, get_clock
Sent 69 2062046.795756 2062046.795756 6: seq: 12, get_clock
Sent 70 2062047.780170 2062047.780170 6: seq: 13, get_clock
Sent 71 2062048.764924 2062048.764924 6: seq: 14, get_clock
Sent 72 2062049.749737 2062049.749737 6: seq: 15, get_clock
Sent 73 2062050.734567 2062050.734567 6: seq: 16, get_clock
Sent 74 2062051.721404 2062051.721404 6: seq: 17, get_clock
Sent 75 2062052.705633 2062052.705633 6: seq: 18, get_clock
Sent 76 2062053.690064 2062053.690064 6: seq: 19, get_clock
Sent 77 2062054.674819 2062054.674819 6: seq: 1a, get_clock
Sent 78 2062055.659523 2062055.659523 6: seq: 1b, get_clock
Sent 79 2062056.644203 2062056.644203 6: seq: 1c, get_clock
Sent 80 2062057.628819 2062057.628819 6: seq: 1d, get_clock
Sent 81 2062058.613668 2062058.613668 6: seq: 1e, get_clock
Sent 82 2062059.598160 2062059.598160 6: seq: 1f, get_clock
Sent 83 2062060.582961 2062060.582961 6: seq: 10, get_clock
Sent 84 2062061.567642 2062061.567642 6: seq: 11, get_clock
Sent 85 2062062.552228 2062062.552228 6: seq: 12, get_clock
Sent 86 2062063.536621 2062063.536621 6: seq: 13, get_clock
Sent 87 2062064.521097 2062064.521097 6: seq: 14, get_clock
Sent 88 2062065.505750 2062065.505750 6: seq: 15, get_clock
Sent 89 2062066.490516 2062066.490516 6: seq: 16, get_clock
Sent 90 2062067.475654 2062067.475654 6: seq: 17, get_clock
Sent 91 2062068.460500 2062068.460500 6: seq: 18, get_clock
Sent 92 2062069.445094 2062069.445094 6: seq: 19, get_clock
Sent 93 2062070.429495 2062070.429495 6: seq: 1a, get_clock
Sent 94 2062071.414089 2062071.414089 6: seq: 1b, get_clock
Sent 95 2062072.398447 2062072.398447 6: seq: 1c, get_clock
Sent 96 2062073.383442 2062073.383442 6: seq: 1d, get_clock
Sent 97 2062074.368544 2062074.368544 6: seq: 1e, get_clock
Sent 98 2062075.352685 2062075.352685 6: seq: 1f, get_clock
Sent 99 2062075.565532 2062075.565532 6: seq: 10, emergency_stop
Dumping receive queue 100 messages
Receive: 0 2061994.609797 2061994.609344 11: seq: 1e, clock clock=3621036858
Receive: 1 2061995.594932 2061995.594104 11: seq: 1f, clock clock=3632854456
Receive: 2 2061996.580036 2061996.579069 11: seq: 10, clock clock=3644674053
Receive: 3 2061997.460230 2061996.579069 11: seq: 10, stats count=67 sum=2123 sumsq=414
Receive: 4 2061997.564044 2061997.563299 11: seq: 11, clock clock=3656485260
Receive: 5 2061998.549169 2061998.548269 11: seq: 12, clock clock=3668304940
Receive: 6 2061999.534284 2061999.533009 11: seq: 13, clock clock=3680122042
Receive: 7 2062000.518155 2062000.517387 11: seq: 14, clock clock=3691934856
Receive: 8 2062001.503327 2062001.502218 11: seq: 15, clock clock=3703753061
Receive: 9 2062002.459710 2062001.502218 11: seq: 15, stats count=67 sum=2121 sumsq=413
Receive: 10 2062002.488528 2062002.487298 11: seq: 16, clock clock=3715574225
Receive: 11 2062003.472408 2062003.471633 11: seq: 17, clock clock=3727386545
Receive: 12 2062004.457523 2062004.456035 11: seq: 18, clock clock=3739199755
Receive: 13 2062005.441410 2062005.440357 11: seq: 19, clock clock=3751011913
Receive: 14 2062006.425289 2062006.424605 11: seq: 1a, clock clock=3762823179
Receive: 15 2062007.410408 2062007.409496 11: seq: 1b, clock clock=3774641944
Receive: 16 2062007.459279 2062007.409496 11: seq: 1b, stats count=70 sum=2275 sumsq=464
Receive: 17 2062008.394405 2062008.394001 11: seq: 1c, clock clock=3786456269
Receive: 18 2062009.379588 2062009.378744 11: seq: 1d, clock clock=3798273594
Receive: 19 2062010.363410 2062010.362888 11: seq: 1e, clock clock=3810083389
Receive: 20 2062011.348535 2062011.347856 11: seq: 1f, clock clock=3821903433
Receive: 21 2062012.333643 2062012.332779 11: seq: 10, clock clock=3833722511
Receive: 22 2062012.458853 2062012.332779 11: seq: 10, stats count=67 sum=2122 sumsq=414
Receive: 23 2062013.318904 2062013.317938 11: seq: 11, clock clock=3845544693
Receive: 24 2062014.304036 2062014.302541 11: seq: 12, clock clock=3857360268
Receive: 25 2062015.287905 2062015.287535 11: seq: 13, clock clock=3869180423
Receive: 26 2062016.273025 2062016.272542 11: seq: 14, clock clock=3881000694
Receive: 27 2062017.258169 2062017.256850 11: seq: 15, clock clock=3892812906
Receive: 28 2062017.459614 2062017.256850 11: seq: 15, stats count=67 sum=2123 sumsq=414
Receive: 29 2062018.242149 2062018.241312 11: seq: 16, clock clock=3904626429
Receive: 30 2062019.227292 2062019.225903 11: seq: 17, clock clock=3916441875
Receive: 31 2062020.211203 2062020.210843 11: seq: 18, clock clock=3928261584
Receive: 32 2062021.196300 2062021.195325 11: seq: 19, clock clock=3940075389
Receive: 33 2062022.181417 2062022.180262 11: seq: 1a, clock clock=3951894897
Receive: 34 2062022.459028 2062022.180262 11: seq: 1a, stats count=67 sum=2123 sumsq=414
Receive: 35 2062023.165410 2062023.164351 11: seq: 1b, clock clock=3963704381
Receive: 36 2062024.150555 2062024.149417 11: seq: 1c, clock clock=3975525319
Receive: 37 2062025.134416 2062025.133689 11: seq: 1d, clock clock=3987336772
Receive: 38 2062026.119527 2062026.118441 11: seq: 1e, clock clock=3999154009
Receive: 39 2062027.104666 2062027.103379 11: seq: 1f, clock clock=4010973624
Receive: 40 2062027.458582 2062027.103379 11: seq: 1f, stats count=67 sum=2123 sumsq=414
Receive: 41 2062028.088659 2062028.088316 11: seq: 10, clock clock=4022793054
Receive: 42 2062029.073783 2062029.072422 11: seq: 11, clock clock=4034602585
Receive: 43 2062030.057663 2062030.057296 11: seq: 12, clock clock=4046421363
Receive: 44 2062031.042786 2062031.041875 11: seq: 13, clock clock=4058236506
Receive: 45 2062032.026657 2062032.026097 11: seq: 14, clock clock=4070047590
Receive: 46 2062032.459365 2062032.026097 11: seq: 14, stats count=67 sum=2124 sumsq=416
Receive: 47 2062033.011913 2062033.010631 11: seq: 15, clock clock=4081862065
Receive: 48 2062033.995796 2062033.994833 11: seq: 16, clock clock=4093672738
Receive: 49 2062034.979635 2062034.979230 11: seq: 17, clock clock=4105485653
Receive: 50 2062035.966121 2062035.964606 11: seq: 18, clock clock=4117310669
Receive: 51 2062036.949925 2062036.948887 11: seq: 19, clock clock=4129122324
Receive: 52 2062037.458808 2062036.948887 11: seq: 19, stats count=67 sum=2123 sumsq=413
Receive: 53 2062037.935184 2062037.933783 11: seq: 1a, clock clock=4140941377
Receive: 54 2062038.919040 2062038.918369 11: seq: 1b, clock clock=4152756465
Receive: 55 2062039.904179 2062039.902817 11: seq: 1c, clock clock=4164570158
Receive: 56 2062040.889312 2062040.888058 11: seq: 1d, clock clock=4176393304
Receive: 57 2062041.874467 2062041.872870 11: seq: 1e, clock clock=4188211218
Receive: 58 2062042.458383 2062041.872870 11: seq: 1e, stats count=67 sum=2123 sumsq=414
Receive: 59 2062042.858403 2062042.857844 11: seq: 1f, clock clock=4200031010
Receive: 60 2062043.843594 2062043.842390 11: seq: 10, clock clock=4211845929
Receive: 61 2062044.827405 2062044.826615 11: seq: 11, clock clock=4223656969
Receive: 62 2062045.812538 2062045.811285 10: seq: 12, clock clock=4235473209
Receive: 63 2062046.796417 2062046.795756 10: seq: 13, clock clock=4247287089
Receive: 64 2062047.459111 2062046.795756 11: seq: 13, stats count=67 sum=2119 sumsq=411
Receive: 65 2062047.781672 2062047.780170 10: seq: 14, clock clock=4259100386
Receive: 66 2062048.765551 2062048.764924 10: seq: 15, clock clock=4270917629
Receive: 67 2062049.750662 2062049.749737 10: seq: 16, clock clock=4282735723
Receive: 68 2062050.735897 2062050.734567 9: seq: 17, clock clock=4294554013
Receive: 69 2062051.722219 2062051.721404 10: seq: 18, clock clock=11428932
Receive: 70 2062052.458556 2062051.721404 11: seq: 18, stats count=67 sum=2109 sumsq=403
Receive: 71 2062052.706155 2062052.705633 10: seq: 19, clock clock=23239725
Receive: 72 2062053.691278 2062053.690064 10: seq: 1a, clock clock=35053214
Receive: 73 2062054.675167 2062054.674819 10: seq: 1b, clock clock=46870516
Receive: 74 2062055.660285 2062055.659523 10: seq: 1c, clock clock=58687214
Receive: 75 2062056.645400 2062056.644203 10: seq: 1d, clock clock=70503547
Receive: 76 2062057.458103 2062056.644203 11: seq: 1d, stats count=67 sum=2109 sumsq=405
Receive: 77 2062057.629407 2062057.628819 10: seq: 1e, clock clock=82319249
Receive: 78 2062058.614541 2062058.613668 10: seq: 1f, clock clock=94137688
Receive: 79 2062059.599643 2062059.598160 10: seq: 10, clock clock=105952022
Receive: 80 2062060.583532 2062060.582961 10: seq: 11, clock clock=117769696
Receive: 81 2062061.568705 2062061.567642 10: seq: 12, clock clock=129586202
Receive: 82 2062062.458828 2062061.567642 11: seq: 12, stats count=67 sum=2111 sumsq=406
Receive: 83 2062062.552671 2062062.552228 10: seq: 13, clock clock=141401627
Receive: 84 2062063.537788 2062063.536621 10: seq: 14, clock clock=153214437
Receive: 85 2062064.521703 2062064.521097 10: seq: 15, clock clock=165028628
Receive: 86 2062065.506832 2062065.505750 10: seq: 16, clock clock=176844455
Receive: 87 2062066.491901 2062066.490516 10: seq: 17, clock clock=188661886
Receive: 88 2062067.458316 2062066.490516 11: seq: 17, stats count=67 sum=2110 sumsq=406
Receive: 89 2062067.477156 2062067.475654 10: seq: 18, clock clock=200483868
Receive: 90 2062068.461030 2062068.460500 11: seq: 19, clock clock=212302249
Receive: 91 2062069.446233 2062069.445094 11: seq: 1a, clock clock=224117942
Receive: 92 2062070.430047 2062070.429495 11: seq: 1b, clock clock=235930706
Receive: 93 2062071.415163 2062071.414089 11: seq: 1c, clock clock=247746323
Receive: 94 2062072.399047 2062072.398447 11: seq: 1d, clock clock=259558661
Receive: 95 2062072.457953 2062072.398447 11: seq: 1d, stats count=70 sum=2275 sumsq=461
Receive: 96 2062073.384299 2062073.383442 11: seq: 1e, clock clock=271378850
Receive: 97 2062074.369426 2062074.368544 11: seq: 1f, clock clock=283200289
Receive: 98 2062075.353298 2062075.352685 11: seq: 10, clock clock=295010229
Receive: 99 2062075.565967 2062075.565532 12: seq: 11, shutdown clock=297564726 static_string_id=Command request
Unable to issue reset command on MCU 'mcu'
Attempting MCU 'PIS' reset command
webhooks client 1964949544: Disconnected
Restarting printer
Start printer at Mon Jul 14 21:01:53 2025 (1752523313.9 2062261.0)
===== Config file =====
[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA5
position_endstop = -10
position_max = 240
position_min = -15
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA6
position_endstop = -10
position_max = 225
position_min = -15
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 270
position_min = -4

[extruder]
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
gear_ratio = 42:12
rotation_distance = 26.3952
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PC5
min_temp = 0
max_temp = 300
pressure_advance = 0.0950
control = pid
pid_kp = 21.734
pid_ki = 1.050
pid_kd = 112.471

[heater_bed]
heater_pin = PA7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 81.000
pid_ki = 1.616
pid_kd = 1014.000
min_temp = 0
max_temp = 110

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[heater_fan hotend_fan]
pin = PC0

[fan]
pin = PA0

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method = command

[mcu PIS]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6687030674CB131-if00
restart_method = command

[adxl345]
cs_pin = PIS:gpio13
spi_software_sclk_pin = PIS:gpio10
spi_software_mosi_pin = PIS:gpio11
spi_software_miso_pin = PIS:gpio12
axes_map = x,-z,y

[resonance_tester]
accel_chip = adxl345
probe_points =
	100,100,20

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2000
max_z_velocity = 10
max_z_accel = 200

[bltouch]
sensor_pin = ^PC14
control_pin = PC13
x_offset = -31.8
y_offset = -40.5
z_offset = 2.915
speed = 10
pin_move_time = 1.0
probe_with_touch_mode = true
stow_on_each_sample = true
samples = 2
samples_result = average
sample_retract_dist = 2.0
samples_tolerance = 0.100
samples_tolerance_retries = 1

[virtual_sdcard]
path = /home/pi/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]
recover_velocity = 25

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}

	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}


	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False

	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}

	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"

	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}


	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}

	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}

	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}

	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro _CLIENT_LINEAR_MOVE]
description = Linear move with save and restore of the gcode state
gcode =
	{% set x_move = "X" ~ params.X if params.X is defined else "" %}
	{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
	{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
	{% set e_move = "E" ~ params.E if params.E is defined else "" %}
	{% set rate = "F" ~ params.F if params.F is defined else "" %}
	{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
	{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
	SAVE_GCODE_STATE NAME=_client_movement
	{% if x_move or y_move or z_move %}
	G9{ 0 if ABSOLUTE else 1 }
	{% endif %}
	{% if e_move %}
	M8{ 2 if ABSOLUTE_E else 3 }
	{% endif %}
	G1 { x_move } { y_move } { z_move } { e_move } { rate }
	RESTORE_GCODE_STATE NAME=_client_movement

[safe_z_home]
home_xy_position = 147,154
speed = 100
z_hop = 10
z_hop_speed = 5

[bed_mesh]
speed = 120
mesh_min = 20, 20
mesh_max = 200, 184.5
probe_count = 11,11
algorithm = bicubic

[gcode_macro TILT_ADJUST]
description = Start screws tilt adjust
gcode =
	SCREWS_TILT_CALCULATE

[screws_tilt_adjust]
screw1 = 50, 67
screw1_name = front left
screw2 = 226, 67
screw2_name = front right
screw3 = 226, 225
screw3_name = back right
screw4 = 50, 225
screw4_name = back left
horizontal_move_z = 10.
speed = 50.
screw_thread = CW-M3

[exclude_object]

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode =

	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}

	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}

	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}

	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}

	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}

	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}

	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}

	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }

	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }

	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }

	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }

	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}

	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}

	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }

	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}

	{% else %}

	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}

	{% endif %}

	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}

	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}

	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode =

	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}


	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}


	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}



	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}

	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}

	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}


	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}

	{% if cross_section < 5 %}

	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}

	{% else %}

	{% if verbose_enable == True %}

	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}

	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}

	{% if purge_y_origin > 0 %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }

	{% else %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Prepurge_State

	{% if purge_y_origin > 0 %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% else %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% endif %}

	RESTORE_GCODE_STATE NAME=Prepurge_State

	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode =

	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}


	{% if verbose_enable == True %}

	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Presmartpark_State

	G90
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

	RESTORE_GCODE_STATE NAME=Presmartpark_State

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 5
variable_fuzz_amount = 0.2
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 15
variable_smart_park_height = 10
gcode =

	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[temperature_sensor Raspberry_Pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[filament_switch_sensor e0_sensor]
switch_pin = !PC15
pause_on_runout = true
runout_gcode = PAUSE

[bed_mesh default]
version = 1
points =
	0.012500, -0.007500, -0.035000, -0.077500, -0.145000, -0.092500, -0.057500, -0.047500, 0.002500, 0.180000, 0.282500
	-0.002500, -0.025000, -0.052500, -0.122500, -0.167500, -0.127500, -0.082500, -0.075000, -0.007500, 0.170000, 0.300000
	-0.000000, -0.022500, -0.090000, -0.132500, -0.197500, -0.100000, -0.142500, -0.100000, -0.052500, 0.057500, 0.087500
	0.020000, 0.050000, -0.035000, -0.105000, -0.115000, -0.065000, -0.112500, -0.022500, -0.015000, 0.005000, 0.087500
	0.032500, -0.030000, -0.040000, -0.077500, -0.097500, -0.085000, -0.037500, -0.037500, -0.042500, 0.072500, 0.182500
	0.030000, 0.007500, -0.040000, -0.062500, -0.097500, -0.060000, -0.047500, -0.010000, -0.022500, 0.122500, 0.107500
	0.035000, -0.015000, 0.012500, -0.015000, -0.115000, -0.072500, -0.017500, -0.005000, 0.012500, 0.077500, 0.182500
	0.030000, -0.010000, -0.010000, -0.087500, -0.097500, -0.062500, -0.022500, -0.040000, 0.005000, 0.032500, 0.160000
	0.010000, 0.012500, -0.042500, -0.090000, -0.137500, -0.072500, -0.032500, 0.005000, -0.005000, 0.082500, 0.167500
	-0.012500, -0.027500, -0.085000, -0.097500, -0.130000, -0.080000, -0.140000, 0.010000, -0.005000, 0.052500, 0.155000
	-0.095000, -0.092500, -0.135000, -0.180000, -0.185000, -0.140000, -0.107500, -0.055000, -0.092500, -0.027500, 0.037500
x_count = 11
y_count = 11
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 20.0
max_x = 200.0
min_y = 20.0
max_y = 184.49999999999997
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1946423056: New connection
webhooks client 1946423056: Client info {'program': 'Moonraker', 'version': 'v0.9.3-87-g06cdffa'}
mcu 'mcu': got {'count': 154, 'sum': 253800, 'sumsq': 2132230, '#name': 'stats', '#sent_time': 2062264.139323465, '#receive_time': 2062264.143587215}
Loaded MCU 'mcu' 144 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=84000000 MCU=stm32f401xc PWM_MAX=257 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PH0,PH1 RESERVE_PINS_serial=PA10,PA9 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=11 STEPPER_STEP_BOTH_EDGE=1
mcu 'PIS': Starting serial connect
mcu 'PIS': got {'count': 449, 'sum': 29015, 'sumsq': 15910, '#name': 'stats', '#sent_time': 2062264.815868621, '#receive_time': 2062264.8664081}
Loaded MCU 'PIS' 132 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'PIS' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0_gpio0_gpio3_gpio2=gpio0,gpio3,gpio2 BUS_PINS_spi0_gpio16_gpio19_gpio18=gpio16,gpio19,gpio18 BUS_PINS_spi0_gpio20_gpio23_gpio22=gpio20,gpio23,gpio22 BUS_PINS_spi0_gpio4_gpio3_gpio2=gpio4,gpio3,gpio2 BUS_PINS_spi0_gpio4_gpio7_gpio6=gpio4,gpio7,gpio6 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1_gpio12_gpio11_gpio10=gpio12,gpio11,gpio10 BUS_PINS_spi1_gpio12_gpio15_gpio14=gpio12,gpio15,gpio14 BUS_PINS_spi1_gpio24_gpio27_gpio26=gpio24,gpio27,gpio26 BUS_PINS_spi1_gpio8_gpio11_gpio10=gpio8,gpio11,gpio10 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=2 STEPPER_STEP_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'PIS' printer configuration...
Configured MCU 'PIS' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (51.8, 60.5)    | (20.0, 20.0)
  1   | (69.8, 60.5)    | (38.0, 20.0)
  2   | (87.8, 60.5)    | (56.0, 20.0)
  3   | (105.8, 60.5)   | (74.0, 20.0)
  4   | (123.8, 60.5)   | (92.0, 20.0)
  5   | (141.8, 60.5)   | (110.0, 20.0)
  6   | (159.8, 60.5)   | (128.0, 20.0)
  7   | (177.8, 60.5)   | (146.0, 20.0)
  8   | (195.8, 60.5)   | (164.0, 20.0)
  9   | (213.8, 60.5)   | (182.0, 20.0)
  10  | (231.8, 60.5)   | (200.0, 20.0)
  11  | (231.8, 77.0)   | (200.0, 36.5)
  12  | (213.8, 77.0)   | (182.0, 36.5)
  13  | (195.8, 77.0)   | (164.0, 36.5)
  14  | (177.8, 77.0)   | (146.0, 36.5)
  15  | (159.8, 77.0)   | (128.0, 36.5)
  16  | (141.8, 77.0)   | (110.0, 36.5)
  17  | (123.8, 77.0)   | (92.0, 36.5)
  18  | (105.8, 77.0)   | (74.0, 36.5)
  19  | (87.8, 77.0)    | (56.0, 36.5)
  20  | (69.8, 77.0)    | (38.0, 36.5)
  21  | (51.8, 77.0)    | (20.0, 36.5)
  22  | (51.8, 93.4)    | (20.0, 52.9)
  23  | (69.8, 93.4)    | (38.0, 52.9)
  24  | (87.8, 93.4)    | (56.0, 52.9)
  25  | (105.8, 93.4)   | (74.0, 52.9)
  26  | (123.8, 93.4)   | (92.0, 52.9)
  27  | (141.8, 93.4)   | (110.0, 52.9)
  28  | (159.8, 93.4)   | (128.0, 52.9)
  29  | (177.8, 93.4)   | (146.0, 52.9)
  30  | (195.8, 93.4)   | (164.0, 52.9)
  31  | (213.8, 93.4)   | (182.0, 52.9)
  32  | (231.8, 93.4)   | (200.0, 52.9)
  33  | (231.8, 109.9)  | (200.0, 69.4)
  34  | (213.8, 109.9)  | (182.0, 69.4)
  35  | (195.8, 109.9)  | (164.0, 69.4)
  36  | (177.8, 109.9)  | (146.0, 69.4)
  37  | (159.8, 109.9)  | (128.0, 69.4)
  38  | (141.8, 109.9)  | (110.0, 69.4)
  39  | (123.8, 109.9)  | (92.0, 69.4)
  40  | (105.8, 109.9)  | (74.0, 69.4)
  41  | (87.8, 109.9)   | (56.0, 69.4)
  42  | (69.8, 109.9)   | (38.0, 69.4)
  43  | (51.8, 109.9)   | (20.0, 69.4)
  44  | (51.8, 126.3)   | (20.0, 85.8)
  45  | (69.8, 126.3)   | (38.0, 85.8)
  46  | (87.8, 126.3)   | (56.0, 85.8)
  47  | (105.8, 126.3)  | (74.0, 85.8)
  48  | (123.8, 126.3)  | (92.0, 85.8)
  49  | (141.8, 126.3)  | (110.0, 85.8)
...points 50 through 120 truncated
Stats 2062266.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1390 bytes_read=5491 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999614 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=958 bytes_read=5162 bytes_retransmit=9 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000110 adj=11999558 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.547 memavail=718120 print_time=182.537 buffer_time=0.191 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1946423056
webhooks: registering remote method 'reboot_machine' for connection id: 1946423056
webhooks: registering remote method 'pause_job_queue' for connection id: 1946423056
webhooks: registering remote method 'start_job_queue' for connection id: 1946423056
Stats 2062267.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1396 bytes_read=5612 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999825 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=964 bytes_read=5177 bytes_retransmit=9 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000129 adj=11999702 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=45.590 memavail=717872 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2062268.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1402 bytes_read=5733 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999384 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=970 bytes_read=5192 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000182 adj=11999771 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.621 memavail=717632 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062269.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=1408 bytes_read=5854 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999405 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=976 bytes_read=5207 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000234 adj=12000104 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.642 memavail=717640 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062270.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=1414 bytes_read=5975 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999319 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000010 bytes_write=982 bytes_read=5234 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000244 adj=12000252 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.664 memavail=717640 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062271.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=1420 bytes_read=6096 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000010 bytes_write=988 bytes_read=5249 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000326 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.685 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062272.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=1426 bytes_read=6202 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000010 bytes_write=994 bytes_read=5264 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.708 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062273.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=1432 bytes_read=6323 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999356 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000010 bytes_write=1000 bytes_read=5279 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000369 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.730 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062274.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1438 bytes_read=6457 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000010 bytes_write=1006 bytes_read=5294 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.751 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062275.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1444 bytes_read=6563 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999394 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1012 bytes_read=5320 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=45.773 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062276.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1450 bytes_read=6684 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999394 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1018 bytes_read=5335 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000300 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=45.794 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062277.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1456 bytes_read=6805 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999406 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1024 bytes_read=5351 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000323 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=45.816 memavail=717644 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062278.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1462 bytes_read=6911 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999524 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1030 bytes_read=5367 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000319 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.838 memavail=717648 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062279.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1468 bytes_read=7045 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999500 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1036 bytes_read=5383 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000248 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.861 memavail=717648 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062280.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1474 bytes_read=7166 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999463 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1042 bytes_read=5410 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000292 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=45.882 memavail=717648 print_time=182.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062281.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1673 bytes_read=7287 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999464 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1048 bytes_read=5426 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000320 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.918 memavail=717648 print_time=198.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062282.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1679 bytes_read=7408 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999503 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1054 bytes_read=5442 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000314 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.941 memavail=717648 print_time=198.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062283.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1949 bytes_read=7693 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999489 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1060 bytes_read=5458 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000283 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=45.976 memavail=717648 print_time=199.533 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062284.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000008 bytes_write=2383 bytes_read=8179 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999461 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1066 bytes_read=5474 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000302 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.024 memavail=717652 print_time=200.533 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062285.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000008 bytes_write=2805 bytes_read=8647 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999424 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1072 bytes_read=5501 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000318 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.070 memavail=717652 print_time=201.533 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062286.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000008 bytes_write=3311 bytes_read=9136 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=83999403 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1078 bytes_read=5517 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000368 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.119 memavail=717652 print_time=202.710 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062287.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000008 bytes_write=3773 bytes_read=9485 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999379 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1084 bytes_read=5533 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000367 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.165 memavail=717652 print_time=203.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062288.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000008 bytes_write=4183 bytes_read=9937 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999354 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1090 bytes_read=5549 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000379 heater_bed: target=0 temp=19.1 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.207 memavail=717652 print_time=204.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 2062289.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=4582 bytes_read=10389 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1096 bytes_read=5565 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000385 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.251 memavail=717652 print_time=205.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 2062290.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=4997 bytes_read=10835 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1102 bytes_read=5592 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000383 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.297 memavail=717656 print_time=206.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 2062291.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=5979 bytes_read=11370 bytes_retransmit=9 bytes_invalid=0 send_seq=458 receive_seq=455 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=69 upcoming_bytes=74 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1108 bytes_read=5608 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000247 adj=12000382 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=46.374 memavail=717656 print_time=210.120 buffer_time=2.753 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062292.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6112 bytes_read=11516 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1114 bytes_read=5624 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000248 adj=12000341 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.398 memavail=717656 print_time=210.120 buffer_time=1.752 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 2062293.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6118 bytes_read=11622 bytes_retransmit=9 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1120 bytes_read=5640 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000249 adj=12000341 heater_bed: target=0 temp=19.8 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=46.423 memavail=717660 print_time=210.120 buffer_time=0.751 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062294.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6124 bytes_read=11758 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1126 bytes_read=5656 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.448 memavail=717660 print_time=210.120 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062295.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6178 bytes_read=11922 bytes_retransmit=9 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1132 bytes_read=5683 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000250 adj=12000348 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.474 memavail=717660 print_time=210.120 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2062296.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6307 bytes_read=12121 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=36 freq=83999354 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1138 bytes_read=5699 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000345 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.509 memavail=717660 print_time=211.639 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062297.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6341 bytes_read=12252 bytes_retransmit=9 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1144 bytes_read=5715 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.533 memavail=717660 print_time=211.639 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2062298.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=6459 bytes_read=12504 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=36 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1156 bytes_read=5747 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.567 memavail=717660 print_time=214.156 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062299.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6526 bytes_read=12629 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=18 freq=83999352 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1162 bytes_read=5763 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000358 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.591 memavail=717664 print_time=214.156 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062300.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6580 bytes_read=12793 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999353 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1168 bytes_read=5790 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000342 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.614 memavail=717664 print_time=214.156 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
BLTouch failed to verify sensor state
Stats 2062301.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6670 bytes_read=13007 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1174 bytes_read=5806 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000336 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.645 memavail=722016 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062302.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6676 bytes_read=13113 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1180 bytes_read=5822 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000251 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.663 memavail=721764 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062303.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=6682 bytes_read=13234 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1186 bytes_read=5838 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=46.685 memavail=721764 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062304.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=6688 bytes_read=13369 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1192 bytes_read=5854 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000367 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.706 memavail=721764 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062305.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=6694 bytes_read=13475 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1198 bytes_read=5881 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000361 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.727 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062306.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=6700 bytes_read=13611 bytes_retransmit=9 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1204 bytes_read=5897 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000358 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.750 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062307.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=6706 bytes_read=13717 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1210 bytes_read=5913 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000361 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.771 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062308.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=6712 bytes_read=13823 bytes_retransmit=9 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1216 bytes_read=5929 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.792 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062309.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6718 bytes_read=13972 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1222 bytes_read=5945 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.815 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062310.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6724 bytes_read=14078 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1228 bytes_read=5972 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.837 memavail=721768 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062311.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6736 bytes_read=14200 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1234 bytes_read=5988 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.860 memavail=721520 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062312.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6742 bytes_read=14336 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1240 bytes_read=6004 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000265 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.882 memavail=721520 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062313.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6748 bytes_read=14442 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1246 bytes_read=6020 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000285 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.904 memavail=721520 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062314.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6754 bytes_read=14561 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1252 bytes_read=6036 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000303 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=46.925 memavail=721272 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062315.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6760 bytes_read=14697 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1258 bytes_read=6063 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000313 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.947 memavail=721272 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062316.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6766 bytes_read=14803 bytes_retransmit=9 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1264 bytes_read=6079 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000330 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.969 memavail=721272 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062317.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6772 bytes_read=14909 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1270 bytes_read=6095 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000337 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=46.990 memavail=721032 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062318.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6778 bytes_read=15045 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1276 bytes_read=6111 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000338 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.012 memavail=721032 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062319.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6784 bytes_read=15151 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1282 bytes_read=6127 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000334 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=47.034 memavail=721032 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062320.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6790 bytes_read=15270 bytes_retransmit=9 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1288 bytes_read=6154 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000338 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=47.057 memavail=721036 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062321.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6796 bytes_read=15406 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1294 bytes_read=6170 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000338 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=47.079 memavail=720784 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062322.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6802 bytes_read=15512 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1300 bytes_read=6186 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000336 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.101 memavail=720784 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062323.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6808 bytes_read=15618 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1306 bytes_read=6202 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.122 memavail=720784 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062324.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6814 bytes_read=15754 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1312 bytes_read=6218 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.145 memavail=720784 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062325.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6820 bytes_read=15873 bytes_retransmit=9 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1318 bytes_read=6245 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.169 memavail=720784 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062326.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6826 bytes_read=15979 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1324 bytes_read=6261 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.190 memavail=720284 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062327.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6832 bytes_read=16115 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1330 bytes_read=6277 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.214 memavail=720284 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062328.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6838 bytes_read=16221 bytes_retransmit=9 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1336 bytes_read=6293 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.236 memavail=720284 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062329.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6844 bytes_read=16327 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1342 bytes_read=6309 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.2 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.258 memavail=720284 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062330.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6850 bytes_read=16476 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1348 bytes_read=6336 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.282 memavail=720284 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062331.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6856 bytes_read=16582 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1354 bytes_read=6352 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.304 memavail=720288 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062332.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6862 bytes_read=16688 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1360 bytes_read=6368 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.326 memavail=720288 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062333.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6868 bytes_read=16824 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999344 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1366 bytes_read=6384 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.348 memavail=720288 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062334.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6874 bytes_read=16930 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1372 bytes_read=6400 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000332 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.370 memavail=720288 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062335.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6880 bytes_read=17049 bytes_retransmit=9 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1378 bytes_read=6427 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.393 memavail=719796 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062336.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6886 bytes_read=17185 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1384 bytes_read=6443 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.416 memavail=719796 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062337.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6892 bytes_read=17291 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1390 bytes_read=6459 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.438 memavail=719796 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062338.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6898 bytes_read=17397 bytes_retransmit=9 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1396 bytes_read=6475 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.460 memavail=719796 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062339.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6904 bytes_read=17525 bytes_retransmit=9 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1402 bytes_read=6491 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.484 memavail=719800 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062340.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6910 bytes_read=17637 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1408 bytes_read=6518 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000362 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.505 memavail=719800 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062341.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6916 bytes_read=17736 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1414 bytes_read=6534 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.526 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062342.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6922 bytes_read=17868 bytes_retransmit=9 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1420 bytes_read=6550 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.549 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062343.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6928 bytes_read=17974 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1426 bytes_read=6566 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.570 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062344.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=6934 bytes_read=18080 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1432 bytes_read=6582 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.592 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062345.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6940 bytes_read=18229 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1438 bytes_read=6609 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.615 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062346.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6946 bytes_read=18335 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1444 bytes_read=6625 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.00 cputime=47.635 memavail=719804 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062347.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6952 bytes_read=18441 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1450 bytes_read=6641 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.657 memavail=719808 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062348.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6958 bytes_read=18577 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1456 bytes_read=6657 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.680 memavail=719808 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062349.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6964 bytes_read=18683 bytes_retransmit=9 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1462 bytes_read=6673 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.701 memavail=719808 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062350.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6970 bytes_read=18817 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1468 bytes_read=6700 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.724 memavail=719808 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062351.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6976 bytes_read=18938 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1474 bytes_read=6716 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.747 memavail=719556 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062352.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6982 bytes_read=19044 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1480 bytes_read=6732 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.768 memavail=719556 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062353.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6988 bytes_read=19165 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1486 bytes_read=6748 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000353 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.790 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062354.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=6994 bytes_read=19286 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1492 bytes_read=6764 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.811 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062355.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7000 bytes_read=19405 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1498 bytes_read=6791 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.832 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062356.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7006 bytes_read=19526 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1504 bytes_read=6807 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.854 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062357.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7012 bytes_read=19647 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1510 bytes_read=6823 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000348 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.876 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062358.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7018 bytes_read=19753 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1516 bytes_read=6839 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000337 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.898 memavail=719308 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062359.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7024 bytes_read=19874 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1522 bytes_read=6855 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.00 cputime=47.919 memavail=719060 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062360.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7030 bytes_read=20008 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1534 bytes_read=6898 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.00 cputime=47.941 memavail=719060 print_time=216.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062544.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=8152 bytes_read=41787 bytes_retransmit=9 bytes_invalid=0 send_seq=752 receive_seq=752 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=2656 bytes_read=10286 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.30 cputime=51.717 memavail=723552 print_time=461.377 buffer_time=0.828 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Attempting MCU 'mcu' reset command
Attempting MCU 'PIS' reset command
webhooks client 1946423056: Disconnected
Restarting printer
Start printer at Mon Jul 14 21:06:39 2025 (1752523599.6 2062546.7)
===== Config file =====
[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA5
position_endstop = -10
position_max = 240
position_min = -15
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = !PA6
position_endstop = -10
position_max = 225
position_min = -15
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 270
position_min = -4

[extruder]
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
gear_ratio = 42:12
rotation_distance = 26.3952
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PC5
min_temp = 0
max_temp = 300
pressure_advance = 0.0950
control = pid
pid_kp = 21.734
pid_ki = 1.050
pid_kd = 112.471

[heater_bed]
heater_pin = PA7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 81.000
pid_ki = 1.616
pid_kd = 1014.000
min_temp = 0
max_temp = 110

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[heater_fan hotend_fan]
pin = PC0

[fan]
pin = PA0

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method = command

[mcu PIS]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6687030674CB131-if00
restart_method = command

[adxl345]
cs_pin = PIS:gpio13
spi_software_sclk_pin = PIS:gpio10
spi_software_mosi_pin = PIS:gpio11
spi_software_miso_pin = PIS:gpio12
axes_map = x,-z,y

[resonance_tester]
accel_chip = adxl345
probe_points =
	100,100,20

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2000
max_z_velocity = 10
max_z_accel = 200

[bltouch]
sensor_pin = ^PC14
control_pin = !PC13
x_offset = -31.8
y_offset = -40.5
z_offset = 2.915
speed = 10
pin_move_time = 1.0
probe_with_touch_mode = true
stow_on_each_sample = true
samples = 2
samples_result = average
sample_retract_dist = 2.0
samples_tolerance = 0.100
samples_tolerance_retries = 1

[virtual_sdcard]
path = /home/pi/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]
recover_velocity = 25

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}

	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}


	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False

	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}

	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"

	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}


	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}

	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}

	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}

	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro _CLIENT_LINEAR_MOVE]
description = Linear move with save and restore of the gcode state
gcode =
	{% set x_move = "X" ~ params.X if params.X is defined else "" %}
	{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
	{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
	{% set e_move = "E" ~ params.E if params.E is defined else "" %}
	{% set rate = "F" ~ params.F if params.F is defined else "" %}
	{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
	{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
	SAVE_GCODE_STATE NAME=_client_movement
	{% if x_move or y_move or z_move %}
	G9{ 0 if ABSOLUTE else 1 }
	{% endif %}
	{% if e_move %}
	M8{ 2 if ABSOLUTE_E else 3 }
	{% endif %}
	G1 { x_move } { y_move } { z_move } { e_move } { rate }
	RESTORE_GCODE_STATE NAME=_client_movement

[safe_z_home]
home_xy_position = 147,154
speed = 100
z_hop = 10
z_hop_speed = 5

[bed_mesh]
speed = 120
mesh_min = 20, 20
mesh_max = 200, 184.5
probe_count = 11,11
algorithm = bicubic

[gcode_macro TILT_ADJUST]
description = Start screws tilt adjust
gcode =
	SCREWS_TILT_CALCULATE

[screws_tilt_adjust]
screw1 = 50, 67
screw1_name = front left
screw2 = 226, 67
screw2_name = front right
screw3 = 226, 225
screw3_name = back right
screw4 = 50, 225
screw4_name = back left
horizontal_move_z = 10.
speed = 50.
screw_thread = CW-M3

[exclude_object]

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode =

	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}

	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}

	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}

	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}

	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}

	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}

	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}

	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }

	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }

	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }

	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }

	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}

	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}

	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }

	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}

	{% else %}

	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}

	{% endif %}

	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}

	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}

	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode =

	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}


	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}


	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}



	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}

	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}

	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}


	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}

	{% if cross_section < 5 %}

	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}

	{% else %}

	{% if verbose_enable == True %}

	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}

	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}

	{% if purge_y_origin > 0 %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }

	{% else %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Prepurge_State

	{% if purge_y_origin > 0 %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% else %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% endif %}

	RESTORE_GCODE_STATE NAME=Prepurge_State

	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode =

	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}


	{% if verbose_enable == True %}

	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Presmartpark_State

	G90
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

	RESTORE_GCODE_STATE NAME=Presmartpark_State

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 5
variable_fuzz_amount = 0.2
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 15
variable_smart_park_height = 10
gcode =

	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[temperature_sensor Raspberry_Pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[filament_switch_sensor e0_sensor]
switch_pin = !PC15
pause_on_runout = true
runout_gcode = PAUSE

[bed_mesh default]
version = 1
points =
	0.012500, -0.007500, -0.035000, -0.077500, -0.145000, -0.092500, -0.057500, -0.047500, 0.002500, 0.180000, 0.282500
	-0.002500, -0.025000, -0.052500, -0.122500, -0.167500, -0.127500, -0.082500, -0.075000, -0.007500, 0.170000, 0.300000
	-0.000000, -0.022500, -0.090000, -0.132500, -0.197500, -0.100000, -0.142500, -0.100000, -0.052500, 0.057500, 0.087500
	0.020000, 0.050000, -0.035000, -0.105000, -0.115000, -0.065000, -0.112500, -0.022500, -0.015000, 0.005000, 0.087500
	0.032500, -0.030000, -0.040000, -0.077500, -0.097500, -0.085000, -0.037500, -0.037500, -0.042500, 0.072500, 0.182500
	0.030000, 0.007500, -0.040000, -0.062500, -0.097500, -0.060000, -0.047500, -0.010000, -0.022500, 0.122500, 0.107500
	0.035000, -0.015000, 0.012500, -0.015000, -0.115000, -0.072500, -0.017500, -0.005000, 0.012500, 0.077500, 0.182500
	0.030000, -0.010000, -0.010000, -0.087500, -0.097500, -0.062500, -0.022500, -0.040000, 0.005000, 0.032500, 0.160000
	0.010000, 0.012500, -0.042500, -0.090000, -0.137500, -0.072500, -0.032500, 0.005000, -0.005000, 0.082500, 0.167500
	-0.012500, -0.027500, -0.085000, -0.097500, -0.130000, -0.080000, -0.140000, 0.010000, -0.005000, 0.052500, 0.155000
	-0.095000, -0.092500, -0.135000, -0.180000, -0.185000, -0.140000, -0.107500, -0.055000, -0.092500, -0.027500, 0.037500
x_count = 11
y_count = 11
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 20.0
max_x = 200.0
min_y = 20.0
max_y = 184.49999999999997
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1946421112: New connection
webhooks client 1946421112: Client info {'program': 'Moonraker', 'version': 'v0.9.3-87-g06cdffa'}
Loaded MCU 'mcu' 144 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=84000000 MCU=stm32f401xc PWM_MAX=257 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PH0,PH1 RESERVE_PINS_serial=PA10,PA9 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=11 STEPPER_STEP_BOTH_EDGE=1
mcu 'PIS': Starting serial connect
mcu 'PIS': got {'count': 458, 'sum': 29480, 'sumsq': 16044, '#name': 'stats', '#sent_time': 2062550.594206116, '#receive_time': 2062550.601616898}
Loaded MCU 'PIS' 132 commands (v0.13.0-169-g9323a5df / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'PIS' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0_gpio0_gpio3_gpio2=gpio0,gpio3,gpio2 BUS_PINS_spi0_gpio16_gpio19_gpio18=gpio16,gpio19,gpio18 BUS_PINS_spi0_gpio20_gpio23_gpio22=gpio20,gpio23,gpio22 BUS_PINS_spi0_gpio4_gpio3_gpio2=gpio4,gpio3,gpio2 BUS_PINS_spi0_gpio4_gpio7_gpio6=gpio4,gpio7,gpio6 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1_gpio12_gpio11_gpio10=gpio12,gpio11,gpio10 BUS_PINS_spi1_gpio12_gpio15_gpio14=gpio12,gpio15,gpio14 BUS_PINS_spi1_gpio24_gpio27_gpio26=gpio24,gpio27,gpio26 BUS_PINS_spi1_gpio8_gpio11_gpio10=gpio8,gpio11,gpio10 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=2 STEPPER_STEP_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'PIS' printer configuration...
Configured MCU 'PIS' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (51.8, 60.5)    | (20.0, 20.0)
  1   | (69.8, 60.5)    | (38.0, 20.0)
  2   | (87.8, 60.5)    | (56.0, 20.0)
  3   | (105.8, 60.5)   | (74.0, 20.0)
  4   | (123.8, 60.5)   | (92.0, 20.0)
  5   | (141.8, 60.5)   | (110.0, 20.0)
  6   | (159.8, 60.5)   | (128.0, 20.0)
  7   | (177.8, 60.5)   | (146.0, 20.0)
  8   | (195.8, 60.5)   | (164.0, 20.0)
  9   | (213.8, 60.5)   | (182.0, 20.0)
  10  | (231.8, 60.5)   | (200.0, 20.0)
  11  | (231.8, 77.0)   | (200.0, 36.5)
  12  | (213.8, 77.0)   | (182.0, 36.5)
  13  | (195.8, 77.0)   | (164.0, 36.5)
  14  | (177.8, 77.0)   | (146.0, 36.5)
  15  | (159.8, 77.0)   | (128.0, 36.5)
  16  | (141.8, 77.0)   | (110.0, 36.5)
  17  | (123.8, 77.0)   | (92.0, 36.5)
  18  | (105.8, 77.0)   | (74.0, 36.5)
  19  | (87.8, 77.0)    | (56.0, 36.5)
  20  | (69.8, 77.0)    | (38.0, 36.5)
  21  | (51.8, 77.0)    | (20.0, 36.5)
  22  | (51.8, 93.4)    | (20.0, 52.9)
  23  | (69.8, 93.4)    | (38.0, 52.9)
  24  | (87.8, 93.4)    | (56.0, 52.9)
  25  | (105.8, 93.4)   | (74.0, 52.9)
  26  | (123.8, 93.4)   | (92.0, 52.9)
  27  | (141.8, 93.4)   | (110.0, 52.9)
  28  | (159.8, 93.4)   | (128.0, 52.9)
  29  | (177.8, 93.4)   | (146.0, 52.9)
  30  | (195.8, 93.4)   | (164.0, 52.9)
  31  | (213.8, 93.4)   | (182.0, 52.9)
  32  | (231.8, 93.4)   | (200.0, 52.9)
  33  | (231.8, 109.9)  | (200.0, 69.4)
  34  | (213.8, 109.9)  | (182.0, 69.4)
  35  | (195.8, 109.9)  | (164.0, 69.4)
  36  | (177.8, 109.9)  | (146.0, 69.4)
  37  | (159.8, 109.9)  | (128.0, 69.4)
  38  | (141.8, 109.9)  | (110.0, 69.4)
  39  | (123.8, 109.9)  | (92.0, 69.4)
  40  | (105.8, 109.9)  | (74.0, 69.4)
  41  | (87.8, 109.9)   | (56.0, 69.4)
  42  | (69.8, 109.9)   | (38.0, 69.4)
  43  | (51.8, 109.9)   | (20.0, 69.4)
  44  | (51.8, 126.3)   | (20.0, 85.8)
  45  | (69.8, 126.3)   | (38.0, 85.8)
  46  | (87.8, 126.3)   | (56.0, 85.8)
  47  | (105.8, 126.3)  | (74.0, 85.8)
  48  | (123.8, 126.3)  | (92.0, 85.8)
  49  | (141.8, 126.3)  | (110.0, 85.8)
...points 50 through 120 truncated
Stats 2062552.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=1396 bytes_read=5506 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999202 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=958 bytes_read=5162 bytes_retransmit=9 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000264 adj=11999847 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.48 cputime=54.239 memavail=720824 print_time=6.653 buffer_time=0.191 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1946421112
webhooks: registering remote method 'reboot_machine' for connection id: 1946421112
webhooks: registering remote method 'pause_job_queue' for connection id: 1946421112
webhooks: registering remote method 'start_job_queue' for connection id: 1946421112
Stats 2062553.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=1402 bytes_read=5627 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999578 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=964 bytes_read=5177 bytes_retransmit=9 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000275 adj=12000169 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.48 cputime=54.279 memavail=720580 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062554.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=1408 bytes_read=5733 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999449 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=970 bytes_read=5192 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000290 adj=12000130 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.48 cputime=54.345 memavail=720356 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062555.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=1414 bytes_read=5854 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999611 PIS: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=976 bytes_read=5207 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000273 adj=12000250 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.48 cputime=54.367 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062556.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000035 bytes_write=1420 bytes_read=5990 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999453 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000011 bytes_write=982 bytes_read=5233 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000292 adj=12000187 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.48 cputime=54.389 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062557.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000035 bytes_write=1426 bytes_read=6096 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999844 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000011 bytes_write=988 bytes_read=5248 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000277 adj=12000326 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.44 cputime=54.411 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062558.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000035 bytes_write=1432 bytes_read=6217 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999660 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000011 bytes_write=994 bytes_read=5263 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000271 adj=12000141 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.44 cputime=54.433 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Unknown command:"SUDO"
Stats 2062559.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000035 bytes_write=1438 bytes_read=6338 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999555 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000011 bytes_write=1000 bytes_read=5278 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000269 adj=12000243 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.44 cputime=54.458 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062560.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000035 bytes_write=1444 bytes_read=6444 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999784 PIS: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000011 bytes_write=1006 bytes_read=5293 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000272 adj=12000307 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.44 cputime=54.479 memavail=720360 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062561.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1450 bytes_read=6578 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999677 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1012 bytes_read=5319 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000266 adj=12000208 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.44 cputime=54.501 memavail=720364 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062562.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1456 bytes_read=6699 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999647 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1018 bytes_read=5334 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000266 adj=12000266 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.40 cputime=54.523 memavail=720364 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062563.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1462 bytes_read=6805 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999610 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1024 bytes_read=5350 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000269 adj=12000295 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.40 cputime=54.545 memavail=719860 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062564.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1468 bytes_read=6926 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999558 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1030 bytes_read=5366 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000267 adj=12000337 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.40 cputime=54.567 memavail=719860 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062565.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1474 bytes_read=7047 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999515 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1036 bytes_read=5382 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000267 adj=12000358 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.40 cputime=54.589 memavail=719780 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062566.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1480 bytes_read=7166 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999483 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1042 bytes_read=5409 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000266 adj=12000378 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.40 cputime=54.612 memavail=719780 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062567.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1486 bytes_read=7287 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999472 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1048 bytes_read=5425 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000268 adj=12000385 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.37 cputime=54.634 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062568.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1492 bytes_read=7408 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999434 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1054 bytes_read=5441 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000266 adj=12000389 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.37 cputime=54.656 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062569.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1498 bytes_read=7514 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999412 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1060 bytes_read=5457 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000264 adj=12000397 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.37 cputime=54.677 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062570.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1504 bytes_read=7635 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999395 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1066 bytes_read=5473 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000263 adj=12000393 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.37 cputime=54.699 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062571.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1510 bytes_read=7769 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999384 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1072 bytes_read=5500 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000263 adj=12000388 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.37 cputime=54.721 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062572.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1516 bytes_read=7875 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999372 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1078 bytes_read=5516 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000264 adj=12000390 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.34 cputime=54.742 memavail=719784 print_time=6.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=reset
Sending BLTOUCH_DEBUG COMMAND=pin_down
Stats 2062573.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1537 bytes_read=8001 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=83999358 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1084 bytes_read=5532 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000263 adj=12000392 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.34 cputime=54.772 memavail=719788 print_time=29.699 buffer_time=2.224 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=touch_mode
Stats 2062574.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1554 bytes_read=8122 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=44 freq=83999364 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1090 bytes_read=5548 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000262 adj=12000364 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.34 cputime=54.799 memavail=719788 print_time=30.699 buffer_time=2.223 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062575.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1587 bytes_read=8233 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=24 freq=83999365 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1096 bytes_read=5564 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000261 adj=12000357 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.34 cputime=54.822 memavail=728680 print_time=30.699 buffer_time=1.223 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062576.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1620 bytes_read=8372 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=83999368 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1102 bytes_read=5591 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000348 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.34 cputime=54.848 memavail=728380 print_time=30.699 buffer_time=0.222 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
probe: open
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 2062577.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1648 bytes_read=8517 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=2 freq=83999363 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1108 bytes_read=5607 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000340 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.31 cputime=54.879 memavail=727652 print_time=31.966 buffer_time=0.489 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
probe: open
Stats 2062578.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1677 bytes_read=8647 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999389 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1114 bytes_read=5623 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.31 cputime=54.904 memavail=727176 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062579.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1683 bytes_read=8768 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999380 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1120 bytes_read=5639 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000259 adj=12000322 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.31 cputime=54.926 memavail=727176 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062580.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1689 bytes_read=8889 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999380 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1126 bytes_read=5655 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000259 adj=12000330 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.31 cputime=54.949 memavail=727176 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062581.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1695 bytes_read=9008 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999372 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1132 bytes_read=5682 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000333 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.31 cputime=54.971 memavail=726672 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062582.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1701 bytes_read=9144 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999367 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1138 bytes_read=5698 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000260 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=54.993 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062583.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1707 bytes_read=9250 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999359 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1144 bytes_read=5714 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000259 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=55.014 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062584.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1713 bytes_read=9356 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999357 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1150 bytes_read=5730 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000259 adj=12000359 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=55.035 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062585.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000007 bytes_write=1719 bytes_read=9492 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999354 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1162 bytes_read=5762 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000259 adj=12000361 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.29 cputime=55.057 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062586.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1725 bytes_read=9611 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999355 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1168 bytes_read=5789 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000258 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.29 cputime=55.079 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062587.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1731 bytes_read=9717 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1174 bytes_read=5805 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000258 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=55.100 memavail=726424 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062588.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1737 bytes_read=9853 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1180 bytes_read=5821 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000258 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=55.123 memavail=726428 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062589.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1743 bytes_read=9959 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1186 bytes_read=5837 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.27 cputime=55.145 memavail=726428 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062590.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1749 bytes_read=10065 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1192 bytes_read=5853 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=55.166 memavail=726428 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062591.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1755 bytes_read=10214 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1198 bytes_read=5880 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.27 cputime=55.189 memavail=726428 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062592.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1761 bytes_read=10320 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1204 bytes_read=5896 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000362 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=55.211 memavail=726180 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062593.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1767 bytes_read=10426 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1210 bytes_read=5912 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000258 adj=12000359 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=55.233 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062594.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1773 bytes_read=10562 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1216 bytes_read=5928 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000258 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=55.255 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062595.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1779 bytes_read=10668 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1222 bytes_read=5944 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=55.276 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062596.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1785 bytes_read=10772 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1228 bytes_read=5971 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000257 adj=12000354 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.24 cputime=55.298 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062597.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1791 bytes_read=10912 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1234 bytes_read=5987 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=55.321 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062598.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1797 bytes_read=11011 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1240 bytes_read=6003 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=55.342 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062599.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1809 bytes_read=11111 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=205 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1246 bytes_read=6019 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=55.364 memavail=725940 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062600.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1815 bytes_read=11262 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1252 bytes_read=6035 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000340 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=55.385 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062601.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=1821 bytes_read=11368 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1258 bytes_read=6062 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.22 cputime=55.405 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062602.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1827 bytes_read=11487 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1264 bytes_read=6078 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=55.429 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062603.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1833 bytes_read=11623 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1270 bytes_read=6094 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=55.452 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062604.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1839 bytes_read=11729 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1276 bytes_read=6110 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=55.475 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062605.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1845 bytes_read=11835 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1282 bytes_read=6126 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=55.497 memavail=725692 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062606.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1851 bytes_read=11971 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1288 bytes_read=6153 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000344 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=55.521 memavail=725696 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062607.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1857 bytes_read=12090 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1294 bytes_read=6169 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=55.541 memavail=725696 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062608.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1863 bytes_read=12196 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1300 bytes_read=6185 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=55.564 memavail=725696 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062609.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1869 bytes_read=12332 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1306 bytes_read=6201 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000359 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=55.587 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062610.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1875 bytes_read=12438 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1312 bytes_read=6217 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000373 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=55.609 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062611.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1881 bytes_read=12544 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1318 bytes_read=6244 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000366 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=55.630 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062612.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1887 bytes_read=12693 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1324 bytes_read=6260 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000324 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=55.652 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062613.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1893 bytes_read=12799 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1330 bytes_read=6276 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000329 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=55.673 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062614.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1899 bytes_read=12905 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1336 bytes_read=6292 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000320 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=55.694 memavail=725700 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062615.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1905 bytes_read=13041 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1342 bytes_read=6308 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000318 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=55.715 memavail=725704 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062616.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1911 bytes_read=13147 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1348 bytes_read=6335 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000327 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.17 cputime=55.736 memavail=725704 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062617.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1917 bytes_read=13266 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1354 bytes_read=6351 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000307 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=55.757 memavail=725212 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062618.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1923 bytes_read=13402 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1360 bytes_read=6367 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000320 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=55.780 memavail=725212 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062619.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1929 bytes_read=13508 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1366 bytes_read=6383 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000324 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=55.802 memavail=725212 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062620.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1935 bytes_read=13614 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1372 bytes_read=6399 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000329 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=55.826 memavail=725212 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062621.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=1941 bytes_read=13750 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999346 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1378 bytes_read=6426 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000338 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.16 cputime=55.850 memavail=725216 print_time=31.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062622.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2145 bytes_read=13889 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999349 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1384 bytes_read=6442 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000343 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.15 cputime=55.887 memavail=725216 print_time=78.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2062623.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2151 bytes_read=14010 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999351 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1390 bytes_read=6458 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000342 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=55.911 memavail=724964 print_time=78.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062624.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2325 bytes_read=14218 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999351 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1396 bytes_read=6474 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000336 heater_bed: target=0 temp=19.7 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=55.941 memavail=724964 print_time=78.689 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2062625.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=2742 bytes_read=14666 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999345 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1402 bytes_read=6490 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000335 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=55.985 memavail=724964 print_time=79.689 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062626.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=3176 bytes_read=15153 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1408 bytes_read=6517 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=56.031 memavail=724964 print_time=80.689 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062627.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000007 bytes_write=3658 bytes_read=15700 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=350 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1414 bytes_read=6533 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000352 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=56.082 memavail=724968 print_time=81.747 buffer_time=0.235 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 2062628.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000007 bytes_write=4135 bytes_read=16049 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1420 bytes_read=6549 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000353 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=56.134 memavail=724968 print_time=82.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062629.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000007 bytes_write=4561 bytes_read=16459 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=402 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1426 bytes_read=6565 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000353 heater_bed: target=0 temp=19.7 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=56.181 memavail=724968 print_time=83.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062630.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000007 bytes_write=4978 bytes_read=16932 bytes_retransmit=0 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1432 bytes_read=6581 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000357 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=56.225 memavail=724972 print_time=84.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 2062631.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000007 bytes_write=5400 bytes_read=17385 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1438 bytes_read=6608 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000358 heater_bed: target=0 temp=19.7 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.13 cputime=56.269 memavail=724972 print_time=85.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 2062632.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=5968 bytes_read=17865 bytes_retransmit=0 bytes_invalid=0 send_seq=505 receive_seq=504 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999321 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1444 bytes_read=6624 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.12 cputime=56.321 memavail=724972 print_time=86.732 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2062633.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6632 bytes_read=18191 bytes_retransmit=0 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=83999324 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1450 bytes_read=6640 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000252 adj=12000322 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=56.372 memavail=724972 print_time=89.533 buffer_time=2.017 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 2062634.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6638 bytes_read=18297 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1456 bytes_read=6656 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000337 heater_bed: target=0 temp=19.6 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.12 cputime=56.394 memavail=724972 print_time=89.533 buffer_time=1.016 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 2062635.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6644 bytes_read=18418 bytes_retransmit=0 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=83999325 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1462 bytes_read=6672 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=56.419 memavail=724972 print_time=89.533 buffer_time=0.016 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 2062636.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000006 bytes_write=6677 bytes_read=18544 bytes_retransmit=0 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1468 bytes_read=6699 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000343 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.12 cputime=56.442 memavail=724976 print_time=89.533 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2062637.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=6821 bytes_read=18791 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=43 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1474 bytes_read=6715 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000344 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=56.474 memavail=724976 print_time=91.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062638.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=6858 bytes_read=18922 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=22 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1480 bytes_read=6731 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000340 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=56.497 memavail=724976 print_time=91.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
BLTouch failed to verify sensor state; retrying.
Stats 2062639.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=6996 bytes_read=19179 bytes_retransmit=0 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=54 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1486 bytes_read=6747 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000341 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=56.529 memavail=724976 print_time=93.566 buffer_time=0.045 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062640.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=7066 bytes_read=19290 bytes_retransmit=0 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=33 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1492 bytes_read=6763 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=56.551 memavail=724976 print_time=93.566 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062641.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=7099 bytes_read=19416 bytes_retransmit=0 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1498 bytes_read=6790 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000343 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.11 cputime=56.574 memavail=724976 print_time=93.566 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
BLTouch failed to verify sensor state
Stats 2062642.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7217 bytes_read=19682 bytes_retransmit=0 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1504 bytes_read=6806 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000253 adj=12000344 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=56.604 memavail=724980 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062643.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7223 bytes_read=19788 bytes_retransmit=0 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1510 bytes_read=6822 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.1 sysload=0.10 cputime=56.625 memavail=724980 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062644.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7229 bytes_read=19909 bytes_retransmit=0 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1516 bytes_read=6838 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.648 memavail=724488 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062645.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7235 bytes_read=20030 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1522 bytes_read=6854 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=56.669 memavail=724488 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062646.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000008 bytes_write=7241 bytes_read=20136 bytes_retransmit=0 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1534 bytes_read=6897 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.691 memavail=724488 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062647.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7247 bytes_read=20268 bytes_retransmit=0 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1540 bytes_read=6913 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.713 memavail=724488 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062648.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7253 bytes_read=20381 bytes_retransmit=0 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1546 bytes_read=6929 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.734 memavail=724492 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062649.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7259 bytes_read=20480 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1552 bytes_read=6945 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000351 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.10 cputime=56.755 memavail=724492 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062650.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7265 bytes_read=20594 bytes_retransmit=0 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1558 bytes_read=6961 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.778 memavail=724492 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062651.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=7271 bytes_read=20715 bytes_retransmit=0 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1564 bytes_read=6988 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.10 cputime=56.800 memavail=724464 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062652.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7277 bytes_read=20834 bytes_retransmit=0 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1570 bytes_read=7004 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=56.820 memavail=724464 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062653.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7283 bytes_read=20955 bytes_retransmit=0 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1576 bytes_read=7020 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=56.841 memavail=724464 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062654.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7289 bytes_read=21076 bytes_retransmit=0 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1582 bytes_read=7036 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.09 cputime=56.862 memavail=724464 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062655.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7295 bytes_read=21182 bytes_retransmit=0 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1588 bytes_read=7052 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=56.882 memavail=724464 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062656.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7301 bytes_read=21303 bytes_retransmit=0 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1594 bytes_read=7079 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.09 cputime=56.903 memavail=724224 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062657.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7307 bytes_read=21437 bytes_retransmit=0 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1600 bytes_read=7095 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=56.924 memavail=723976 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062658.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7313 bytes_read=21543 bytes_retransmit=0 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1606 bytes_read=7111 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=56.942 memavail=723976 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062659.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7319 bytes_read=21664 bytes_retransmit=0 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999330 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1612 bytes_read=7127 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=56.964 memavail=723976 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062660.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7325 bytes_read=21785 bytes_retransmit=0 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1618 bytes_read=7143 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=56.984 memavail=723976 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062661.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7337 bytes_read=21907 bytes_retransmit=0 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1624 bytes_read=7170 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000357 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.08 cputime=57.006 memavail=723976 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062662.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7343 bytes_read=22041 bytes_retransmit=0 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1630 bytes_read=7186 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.028 memavail=723728 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062663.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7349 bytes_read=22162 bytes_retransmit=0 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1636 bytes_read=7202 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=57.050 memavail=727872 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062664.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7355 bytes_read=22268 bytes_retransmit=0 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999329 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1642 bytes_read=7218 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000354 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.073 memavail=727872 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062665.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7361 bytes_read=22389 bytes_retransmit=0 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999328 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1648 bytes_read=7234 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.07 cputime=57.096 memavail=727872 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062666.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7367 bytes_read=22510 bytes_retransmit=0 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999327 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1654 bytes_read=7261 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.120 memavail=727620 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062667.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7373 bytes_read=22629 bytes_retransmit=0 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1660 bytes_read=7277 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000360 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.142 memavail=727620 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062668.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7379 bytes_read=22750 bytes_retransmit=0 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999326 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1666 bytes_read=7293 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000365 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.166 memavail=727620 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062669.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7385 bytes_read=22871 bytes_retransmit=0 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1672 bytes_read=7309 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000363 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.189 memavail=727384 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062670.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7391 bytes_read=22977 bytes_retransmit=0 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1678 bytes_read=7325 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.211 memavail=727384 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062671.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7397 bytes_read=23098 bytes_retransmit=0 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1684 bytes_read=7352 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.07 cputime=57.236 memavail=727384 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062672.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7403 bytes_read=23232 bytes_retransmit=0 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1690 bytes_read=7368 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=57.258 memavail=727384 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062673.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7409 bytes_read=23338 bytes_retransmit=0 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1696 bytes_read=7384 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=57.280 memavail=727384 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062674.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7415 bytes_read=23459 bytes_retransmit=0 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1702 bytes_read=7400 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000256 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=57.303 memavail=726880 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062675.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7421 bytes_read=23580 bytes_retransmit=0 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999343 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1708 bytes_read=7416 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000355 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.14 cputime=57.325 memavail=726884 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062676.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7427 bytes_read=23686 bytes_retransmit=0 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999342 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1714 bytes_read=7443 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000331 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.14 cputime=57.348 memavail=726884 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062677.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7433 bytes_read=23820 bytes_retransmit=0 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999340 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1720 bytes_read=7459 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000336 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.21 cputime=57.372 memavail=726392 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062678.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7439 bytes_read=23941 bytes_retransmit=0 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1726 bytes_read=7475 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000340 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=57.395 memavail=726144 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062679.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7445 bytes_read=24047 bytes_retransmit=0 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1732 bytes_read=7491 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000343 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=57.417 memavail=725920 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062680.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7451 bytes_read=24168 bytes_retransmit=0 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1738 bytes_read=7507 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.21 cputime=57.439 memavail=725920 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062681.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7457 bytes_read=24289 bytes_retransmit=0 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1744 bytes_read=7534 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000345 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=39.2 sysload=0.21 cputime=57.462 memavail=725920 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062682.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7463 bytes_read=24408 bytes_retransmit=0 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1750 bytes_read=7550 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.3 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=57.484 memavail=725920 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062683.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7469 bytes_read=24529 bytes_retransmit=0 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1756 bytes_read=7566 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000353 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=57.507 memavail=725668 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062684.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7475 bytes_read=24650 bytes_retransmit=0 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1762 bytes_read=7582 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=57.530 memavail=725672 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062685.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7481 bytes_read=24756 bytes_retransmit=0 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999338 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1768 bytes_read=7598 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000346 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=57.553 memavail=725672 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062686.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000008 bytes_write=7487 bytes_read=24877 bytes_retransmit=0 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1774 bytes_read=7625 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000348 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.19 cputime=57.576 memavail=725672 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062687.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7493 bytes_read=25011 bytes_retransmit=0 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1780 bytes_read=7641 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=57.600 memavail=725672 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062688.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7499 bytes_read=25117 bytes_retransmit=0 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999341 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1786 bytes_read=7657 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000352 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=57.623 memavail=725672 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 2062689.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7505 bytes_read=25238 bytes_retransmit=0 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999339 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1792 bytes_read=7673 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000342 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=57.647 memavail=725432 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062690.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7511 bytes_read=25359 bytes_retransmit=0 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1798 bytes_read=7689 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000255 adj=12000347 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=57.671 memavail=725436 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062691.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7517 bytes_read=25465 bytes_retransmit=0 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999337 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1804 bytes_read=7716 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.18 cputime=57.692 memavail=725436 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062692.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7523 bytes_read=25599 bytes_retransmit=0 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1810 bytes_read=7732 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=57.717 memavail=725184 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062693.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7529 bytes_read=25720 bytes_retransmit=0 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1816 bytes_read=7748 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=57.739 memavail=725184 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062694.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7535 bytes_read=25826 bytes_retransmit=0 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1822 bytes_read=7764 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000351 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=57.761 memavail=725184 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062695.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7541 bytes_read=25947 bytes_retransmit=0 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999336 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1828 bytes_read=7780 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000356 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=57.784 memavail=725184 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062696.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7547 bytes_read=26068 bytes_retransmit=0 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999334 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1834 bytes_read=7807 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.16 cputime=57.807 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062697.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7553 bytes_read=26187 bytes_retransmit=0 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999335 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1840 bytes_read=7823 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000350 heater_bed: target=0 temp=19.4 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=57.829 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062698.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7559 bytes_read=26307 bytes_retransmit=0 bytes_invalid=0 send_seq=627 receive_seq=627 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1846 bytes_read=7839 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000346 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=57.852 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062699.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7565 bytes_read=26419 bytes_retransmit=0 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999333 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1852 bytes_read=7855 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=57.874 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062700.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7571 bytes_read=26518 bytes_retransmit=0 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999332 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1858 bytes_read=7871 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000349 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=57.896 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 2062701.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000007 bytes_write=7577 bytes_read=26632 bytes_retransmit=0 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=83999331 PIS: mcu_awake=0.000 mcu_task_avg=0.000003 mcu_task_stddev=0.000002 bytes_write=1864 bytes_read=7898 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000254 adj=12000352 heater_bed: target=0 temp=19.5 pwm=0.000  Raspberry_Pi: temp=38.6 sysload=0.15 cputime=57.919 memavail=725188 print_time=96.286 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000