API tools faq
paste
PrintService3D

configuration_adv.h

PrintService3D
Feb 14th, 2024
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C++ 177.41 KB | Source Code | 0 0
raw download clone embed print report
  1. /**
  2.  * Marlin 3D Printer Firmware
  3.  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4.  *
  5.  * Based on Sprinter and grbl.
  6.  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7.  *
  8.  * This program is free software: you can redistribute it and/or modify
  9.  * it under the terms of the GNU General Public License as published by
  10.  * the Free Software Foundation, either version 3 of the License, or
  11.  * (at your option) any later version.
  12.  *
  13.  * This program is distributed in the hope that it will be useful,
  14.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16.  * GNU General Public License for more details.
  17.  *
  18.  * You should have received a copy of the GNU General Public License
  19.  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  20.  *
  21.  */
  22. #pragma once
  23.  
  24. /**
  25.  * Configuration_adv.h
  26.  *
  27.  * Advanced settings.
  28.  * Only change these if you know exactly what you're doing.
  29.  * Some of these settings can damage your printer if improperly set!
  30.  *
  31.  * Basic settings can be found in Configuration.h
  32.  */
  33. #define CONFIGURATION_ADV_H_VERSION 02010202
  34.  
  35. // @section develop
  36.  
  37. /**
  38.  * Configuration Export
  39.  *
  40.  * Export the configuration as part of the build. (See signature.py)
  41.  * Output files are saved with the build (e.g., .pio/build/mega2560).
  42.  *
  43.  * See `build_all_examples --ini` as an example of config.ini archiving.
  44.  *
  45.  *  1 = marlin_config.json - Dictionary containing the configuration.
  46.  *      This file is also generated for CONFIGURATION_EMBEDDING.
  47.  *  2 = config.ini - File format for PlatformIO preprocessing.
  48.  *  3 = schema.json - The entire configuration schema. (13 = pattern groups)
  49.  *  4 = schema.yml - The entire configuration schema.
  50.  */
  51. //#define CONFIG_EXPORT 2 // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
  52.  
  53. //===========================================================================
  54. //============================= Thermal Settings ============================
  55. //===========================================================================
  56. // @section temperature
  57.  
  58. /**
  59.  * Thermocouple sensors are quite sensitive to noise.  Any noise induced in
  60.  * the sensor wires, such as by stepper motor wires run in parallel to them,
  61.  * may result in the thermocouple sensor reporting spurious errors.  This
  62.  * value is the number of errors which can occur in a row before the error
  63.  * is reported.  This allows us to ignore intermittent error conditions while
  64.  * still detecting an actual failure, which should result in a continuous
  65.  * stream of errors from the sensor.
  66.  *
  67.  * Set this value to 0 to fail on the first error to occur.
  68.  */
  69. #define THERMOCOUPLE_MAX_ERRORS 15
  70.  
  71. //
  72. // Custom Thermistor 1000 parameters
  73. //
  74. #if TEMP_SENSOR_0 == 1000
  75.   #define HOTEND0_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  76.   #define HOTEND0_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  77.   #define HOTEND0_BETA                    3950 // Beta value
  78.   #define HOTEND0_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  79. #endif
  80.  
  81. #if TEMP_SENSOR_1 == 1000
  82.   #define HOTEND1_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  83.   #define HOTEND1_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  84.   #define HOTEND1_BETA                    3950 // Beta value
  85.   #define HOTEND1_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  86. #endif
  87.  
  88. #if TEMP_SENSOR_2 == 1000
  89.   #define HOTEND2_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  90.   #define HOTEND2_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  91.   #define HOTEND2_BETA                    3950 // Beta value
  92.   #define HOTEND2_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  93. #endif
  94.  
  95. #if TEMP_SENSOR_3 == 1000
  96.   #define HOTEND3_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  97.   #define HOTEND3_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  98.   #define HOTEND3_BETA                    3950 // Beta value
  99.   #define HOTEND3_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  100. #endif
  101.  
  102. #if TEMP_SENSOR_4 == 1000
  103.   #define HOTEND4_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  104.   #define HOTEND4_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  105.   #define HOTEND4_BETA                    3950 // Beta value
  106.   #define HOTEND4_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  107. #endif
  108.  
  109. #if TEMP_SENSOR_5 == 1000
  110.   #define HOTEND5_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  111.   #define HOTEND5_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  112.   #define HOTEND5_BETA                    3950 // Beta value
  113.   #define HOTEND5_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  114. #endif
  115.  
  116. #if TEMP_SENSOR_6 == 1000
  117.   #define HOTEND6_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  118.   #define HOTEND6_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  119.   #define HOTEND6_BETA                    3950 // Beta value
  120.   #define HOTEND6_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  121. #endif
  122.  
  123. #if TEMP_SENSOR_7 == 1000
  124.   #define HOTEND7_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  125.   #define HOTEND7_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  126.   #define HOTEND7_BETA                    3950 // Beta value
  127.   #define HOTEND7_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  128. #endif
  129.  
  130. #if TEMP_SENSOR_BED == 1000
  131.   #define BED_PULLUP_RESISTOR_OHMS        4700 // Pullup resistor
  132.   #define BED_RESISTANCE_25C_OHMS       100000 // Resistance at 25C
  133.   #define BED_BETA                        3950 // Beta value
  134.   #define BED_SH_C_COEFF                     0 // Steinhart-Hart C coefficient
  135. #endif
  136.  
  137. #if TEMP_SENSOR_CHAMBER == 1000
  138.   #define CHAMBER_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
  139.   #define CHAMBER_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
  140.   #define CHAMBER_BETA                    3950 // Beta value
  141.   #define CHAMBER_SH_C_COEFF                 0 // Steinhart-Hart C coefficient
  142. #endif
  143.  
  144. #if TEMP_SENSOR_COOLER == 1000
  145.   #define COOLER_PULLUP_RESISTOR_OHMS     4700 // Pullup resistor
  146.   #define COOLER_RESISTANCE_25C_OHMS    100000 // Resistance at 25C
  147.   #define COOLER_BETA                     3950 // Beta value
  148.   #define COOLER_SH_C_COEFF                  0 // Steinhart-Hart C coefficient
  149. #endif
  150.  
  151. #if TEMP_SENSOR_PROBE == 1000
  152.   #define PROBE_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
  153.   #define PROBE_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
  154.   #define PROBE_BETA                      3950 // Beta value
  155.   #define PROBE_SH_C_COEFF                   0 // Steinhart-Hart C coefficient
  156. #endif
  157.  
  158. #if TEMP_SENSOR_BOARD == 1000
  159.   #define BOARD_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
  160.   #define BOARD_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
  161.   #define BOARD_BETA                      3950 // Beta value
  162.   #define BOARD_SH_C_COEFF                   0 // Steinhart-Hart C coefficient
  163. #endif
  164.  
  165. #if TEMP_SENSOR_REDUNDANT == 1000
  166.   #define REDUNDANT_PULLUP_RESISTOR_OHMS  4700 // Pullup resistor
  167.   #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  168.   #define REDUNDANT_BETA                  3950 // Beta value
  169.   #define REDUNDANT_SH_C_COEFF               0 // Steinhart-Hart C coefficient
  170. #endif
  171.  
  172. /**
  173.  * Thermocouple Options — for MAX6675 (-2), MAX31855 (-3), and MAX31865 (-5).
  174.  */
  175. //#define TEMP_SENSOR_FORCE_HW_SPI                // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus.
  176. //#define MAX31865_SENSOR_WIRES_0 2               // (2-4) Number of wires for the probe connected to a MAX31865 board.
  177. //#define MAX31865_SENSOR_WIRES_1 2
  178. //#define MAX31865_SENSOR_WIRES_2 2
  179.  
  180. //#define MAX31865_50HZ_FILTER                    // Use a 50Hz filter instead of the default 60Hz.
  181. //#define MAX31865_USE_READ_ERROR_DETECTION       // Treat value spikes (20°C delta in under 1s) as read errors.
  182.  
  183. //#define MAX31865_USE_AUTO_MODE                  // Read faster and more often than 1-shot; bias voltage always on; slight effect on RTD temperature.
  184. //#define MAX31865_MIN_SAMPLING_TIME_MSEC     100 // (ms) 1-shot: minimum read interval. Reduces bias voltage effects by leaving sensor unpowered for longer intervals.
  185. //#define MAX31865_IGNORE_INITIAL_FAULTY_READS 10 // Ignore some read faults (keeping the temperature reading) to work around a possible issue (#23439).
  186.  
  187. //#define MAX31865_WIRE_OHMS_0              0.95f // For 2-wire, set the wire resistances for more accurate readings.
  188. //#define MAX31865_WIRE_OHMS_1              0.0f
  189. //#define MAX31865_WIRE_OHMS_2              0.0f
  190.  
  191. /**
  192.  * Hephestos 2 24V heated bed upgrade kit.
  193.  * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/
  194.  */
  195. //#define HEPHESTOS2_HEATED_BED_KIT
  196. #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
  197.   #define HEATER_BED_INVERTING true
  198. #endif
  199.  
  200. //
  201. // Heated Bed Bang-Bang options
  202. //
  203. #if DISABLED(PIDTEMPBED)
  204.   #define BED_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
  205.   #if ENABLED(BED_LIMIT_SWITCHING)
  206.     #define BED_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  207.   #endif
  208. #endif
  209.  
  210. //
  211. // Heated Chamber options
  212. //
  213. #if DISABLED(PIDTEMPCHAMBER)
  214.   #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
  215.   #if ENABLED(CHAMBER_LIMIT_SWITCHING)
  216.     #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
  217.   #endif
  218. #endif
  219.  
  220. #if TEMP_SENSOR_CHAMBER
  221.   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
  222.   //#define HEATER_CHAMBER_INVERTING false
  223.   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
  224.  
  225.   //#define CHAMBER_FAN               // Enable a fan on the chamber
  226.   #if ENABLED(CHAMBER_FAN)
  227.     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)
  228.     #define CHAMBER_FAN_MODE      2   // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve; 3=similar to 1 but fan is always on.
  229.     #if CHAMBER_FAN_MODE == 0
  230.       #define CHAMBER_FAN_BASE  255   // Chamber fan PWM (0-255)
  231.     #elif CHAMBER_FAN_MODE == 1
  232.       #define CHAMBER_FAN_BASE  128   // Base chamber fan PWM (0-255); turns on when chamber temperature is above the target
  233.       #define CHAMBER_FAN_FACTOR 25   // PWM increase per °C above target
  234.     #elif CHAMBER_FAN_MODE == 2
  235.       #define CHAMBER_FAN_BASE  128   // Minimum chamber fan PWM (0-255)
  236.       #define CHAMBER_FAN_FACTOR 25   // PWM increase per °C difference from target
  237.     #elif CHAMBER_FAN_MODE == 3
  238.       #define CHAMBER_FAN_BASE  128   // Base chamber fan PWM (0-255)
  239.       #define CHAMBER_FAN_FACTOR 25   // PWM increase per °C above target
  240.     #endif
  241.   #endif
  242.  
  243.   //#define CHAMBER_VENT              // Enable a servo-controlled vent on the chamber
  244.   #if ENABLED(CHAMBER_VENT)
  245.     #define CHAMBER_VENT_SERVO_NR  1  // Index of the vent servo
  246.     #define HIGH_EXCESS_HEAT_LIMIT 5  // How much above target temp to consider there is excess heat in the chamber
  247.     #define LOW_EXCESS_HEAT_LIMIT  3
  248.     #define MIN_COOLING_SLOPE_TIME_CHAMBER_VENT 20
  249.     #define MIN_COOLING_SLOPE_DEG_CHAMBER_VENT 1.5
  250.   #endif
  251. #endif
  252.  
  253. //
  254. // Laser Cooler options
  255. //
  256. #if TEMP_SENSOR_COOLER
  257.   #define COOLER_MINTEMP           8  // (°C)
  258.   #define COOLER_MAXTEMP          26  // (°C)
  259.   #define COOLER_DEFAULT_TEMP     16  // (°C)
  260.   #define TEMP_COOLER_HYSTERESIS   1  // (°C) Temperature proximity considered "close enough" to the target
  261.   #define COOLER_PIN               8  // Laser cooler on/off pin used to control power to the cooling element (e.g., TEC, External chiller via relay)
  262.   #define COOLER_INVERTING     false
  263.   #define TEMP_COOLER_PIN         15  // Laser/Cooler temperature sensor pin. ADC is required.
  264.   #define COOLER_FAN                  // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
  265.   #define COOLER_FAN_INDEX         0  // FAN number 0, 1, 2 etc. e.g.
  266.   #if ENABLED(COOLER_FAN)
  267.     #define COOLER_FAN_BASE      100  // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
  268.     #define COOLER_FAN_FACTOR     25  // PWM increase per °C above target
  269.   #endif
  270. #endif
  271.  
  272. //
  273. // Motherboard Sensor options
  274. //
  275. #if TEMP_SENSOR_BOARD
  276.   #define THERMAL_PROTECTION_BOARD   // Halt the printer if the board sensor leaves the temp range below.
  277.   #define BOARD_MINTEMP           8  // (°C)
  278.   #define BOARD_MAXTEMP          70  // (°C)
  279.   //#define TEMP_BOARD_PIN -1        // Board temp sensor pin override.
  280. #endif
  281.  
  282. /**
  283.  * Thermal Protection provides additional protection to your printer from damage
  284.  * and fire. Marlin always includes safe min and max temperature ranges which
  285.  * protect against a broken or disconnected thermistor wire.
  286.  *
  287.  * The issue: If a thermistor falls out, it will report the much lower
  288.  * temperature of the air in the room, and the the firmware will keep
  289.  * the heater on.
  290.  *
  291.  * The solution: Once the temperature reaches the target, start observing.
  292.  * If the temperature stays too far below the target (hysteresis) for too
  293.  * long (period), the firmware will halt the machine as a safety precaution.
  294.  *
  295.  * If you get false positives for "Thermal Runaway", increase
  296.  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  297.  */
  298. #if ENABLED(THERMAL_PROTECTION_HOTENDS)
  299.   #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
  300.   #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
  301.  
  302.   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
  303.   #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
  304.     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
  305.   #endif
  306.  
  307.   /**
  308.    * Whenever an M104, M109, or M303 increases the target temperature, the
  309.    * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
  310.    * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
  311.    * requires a hard reset. This test restarts with any M104/M109/M303, but only
  312.    * if the current temperature is far enough below the target for a reliable
  313.    * test.
  314.    *
  315.    * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
  316.    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
  317.    * below 2.
  318.    */
  319.   #define WATCH_TEMP_PERIOD  40               // (seconds)
  320.   #define WATCH_TEMP_INCREASE 2               // (°C)
  321. #endif
  322.  
  323. /**
  324.  * Thermal Protection parameters for the bed are just as above for hotends.
  325.  */
  326. #if ENABLED(THERMAL_PROTECTION_BED)
  327.   #define THERMAL_PROTECTION_BED_PERIOD        20 // (seconds)
  328.   #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // (°C)
  329.  
  330.   /**
  331.    * As described above, except for the bed (M140/M190/M303).
  332.    */
  333.   #define WATCH_BED_TEMP_PERIOD                60 // (seconds)
  334.   #define WATCH_BED_TEMP_INCREASE               2 // (°C)
  335. #endif
  336.  
  337. /**
  338.  * Thermal Protection parameters for the heated chamber.
  339.  */
  340. #if ENABLED(THERMAL_PROTECTION_CHAMBER)
  341.   #define THERMAL_PROTECTION_CHAMBER_PERIOD    20 // (seconds)
  342.   #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C)
  343.  
  344.   /**
  345.    * Heated chamber watch settings (M141/M191).
  346.    */
  347.   #define WATCH_CHAMBER_TEMP_PERIOD            60 // (seconds)
  348.   #define WATCH_CHAMBER_TEMP_INCREASE           2 // (°C)
  349. #endif
  350.  
  351. /**
  352.  * Thermal Protection parameters for the laser cooler.
  353.  */
  354. #if ENABLED(THERMAL_PROTECTION_COOLER)
  355.   #define THERMAL_PROTECTION_COOLER_PERIOD     10 // (seconds)
  356.   #define THERMAL_PROTECTION_COOLER_HYSTERESIS  3 // (°C)
  357.  
  358.   /**
  359.    * Laser cooling watch settings (M143/M193).
  360.    */
  361.   #define WATCH_COOLER_TEMP_PERIOD             60 // (seconds)
  362.   #define WATCH_COOLER_TEMP_INCREASE            3 // (°C)
  363. #endif
  364.  
  365. #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER)
  366.   /**
  367.    * Thermal Protection Variance Monitor - EXPERIMENTAL.
  368.    * Kill the machine on a stuck temperature sensor. Disable if you get false positives.
  369.    */
  370.   //#define THERMAL_PROTECTION_VARIANCE_MONITOR   // Detect a sensor malfunction preventing temperature updates
  371. #endif
  372.  
  373. #if ENABLED(PIDTEMP)
  374.   // Add an additional term to the heater power, proportional to the extrusion speed.
  375.   // A well-chosen Kc value should add just enough power to melt the increased material volume.
  376.   //#define PID_EXTRUSION_SCALING
  377.   #if ENABLED(PID_EXTRUSION_SCALING)
  378.     #define DEFAULT_Kc (100) // heating power = Kc * e_speed
  379.     #define LPQ_MAX_LEN 50
  380.   #endif
  381.  
  382.   /**
  383.    * Add an additional term to the heater power, proportional to the fan speed.
  384.    * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
  385.    * You can either just add a constant compensation with the DEFAULT_Kf value
  386.    * or follow the instruction below to get speed-dependent compensation.
  387.    *
  388.    * Constant compensation (use only with fan speeds of 0% and 100%)
  389.    * ---------------------------------------------------------------------
  390.    * A good starting point for the Kf-value comes from the calculation:
  391.    *   kf = (power_fan * eff_fan) / power_heater * 255
  392.    * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater.
  393.    *
  394.    * Example:
  395.    *   Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8
  396.    *   Kf = (2.4W * 0.8) / 40W * 255 = 12.24
  397.    *
  398.    * Fan-speed dependent compensation
  399.    * --------------------------------
  400.    * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%).
  401.    *    Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled.
  402.    *    If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature
  403.    *    drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big.
  404.    * 2. Note the Kf-value for fan-speed at 100%
  405.    * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving.
  406.    * 4. Repeat step 1. and 2. for this fan speed.
  407.    * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in
  408.    *    PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED
  409.    */
  410.   //#define PID_FAN_SCALING
  411.   #if ENABLED(PID_FAN_SCALING)
  412.     //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION
  413.     #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION)
  414.       // The alternative definition is used for an easier configuration.
  415.       // Just figure out Kf at full speed (255) and PID_FAN_SCALING_MIN_SPEED.
  416.       // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly.
  417.  
  418.       #define PID_FAN_SCALING_AT_FULL_SPEED 13.0        //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf
  419.       #define PID_FAN_SCALING_AT_MIN_SPEED   6.0        //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf
  420.       #define PID_FAN_SCALING_MIN_SPEED     10.0        // Minimum fan speed at which to enable PID_FAN_SCALING
  421.  
  422.       #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED)
  423.       #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
  424.  
  425.     #else
  426.       #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power loss due to cooling = Kf * (fan_speed)
  427.       #define DEFAULT_Kf 10                              // A constant value added to the PID-tuner
  428.       #define PID_FAN_SCALING_MIN_SPEED 10               // Minimum fan speed at which to enable PID_FAN_SCALING
  429.     #endif
  430.   #endif
  431. #endif
  432.  
  433. /**
  434.  * Automatic Temperature Mode
  435.  *
  436.  * Dynamically adjust the hotend target temperature based on planned E moves.
  437.  *
  438.  * (Contrast with PID_EXTRUSION_SCALING, which tracks E movement and adjusts PID
  439.  *  behavior using an additional kC value.)
  440.  *
  441.  * Autotemp is calculated by (mintemp + factor * mm_per_sec), capped to maxtemp.
  442.  *
  443.  * Enable Autotemp Mode with M104/M109 F<factor> S<mintemp> B<maxtemp>.
  444.  * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL).
  445.  */
  446. #define AUTOTEMP
  447. #if ENABLED(AUTOTEMP)
  448.   #define AUTOTEMP_OLDWEIGHT    0.98  // Factor used to weight previous readings (0.0 < value < 1.0)
  449.   // Turn on AUTOTEMP on M104/M109 by default using proportions set here
  450.   //#define AUTOTEMP_PROPORTIONAL
  451.   #if ENABLED(AUTOTEMP_PROPORTIONAL)
  452.     #define AUTOTEMP_MIN_P      0 // (°C) Added to the target temperature
  453.     #define AUTOTEMP_MAX_P      5 // (°C) Added to the target temperature
  454.     #define AUTOTEMP_FACTOR_P   1 // Apply this F parameter by default (overridden by M104/M109 F)
  455.   #endif
  456. #endif
  457.  
  458. // Show Temperature ADC value
  459. // Enable for M105 to include ADC values read from temperature sensors.
  460. //#define SHOW_TEMP_ADC_VALUES
  461.  
  462. /**
  463.  * High Temperature Thermistor Support
  464.  *
  465.  * Thermistors able to support high temperature tend to have a hard time getting
  466.  * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP
  467.  * will probably be caught when the heating element first turns on during the
  468.  * preheating process, which will trigger a MINTEMP error as a safety measure
  469.  * and force stop everything.
  470.  * To circumvent this limitation, we allow for a preheat time (during which,
  471.  * MINTEMP error won't be triggered) and add a min_temp buffer to handle
  472.  * aberrant readings.
  473.  *
  474.  * If you want to enable this feature for your hotend thermistor(s)
  475.  * uncomment and set values > 0 in the constants below
  476.  */
  477.  
  478. // The number of consecutive low temperature errors that can occur
  479. // before a MINTEMP error is triggered. (Shouldn't be more than 10.)
  480. //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
  481.  
  482. /**
  483.  * The number of milliseconds a hotend will preheat before starting to check
  484.  * the temperature. This value should NOT be set to the time it takes the
  485.  * hot end to reach the target temperature, but the time it takes to reach
  486.  * the minimum temperature your thermistor can read. The lower the better/safer.
  487.  * This shouldn't need to be more than 30 seconds (30000)
  488.  */
  489. //#define MILLISECONDS_PREHEAT_TIME 0
  490.  
  491. // @section extruder
  492.  
  493. /**
  494.  * Extruder runout prevention.
  495.  * If the machine is idle and the temperature over MINTEMP
  496.  * then extrude some filament every couple of SECONDS.
  497.  */
  498. //#define EXTRUDER_RUNOUT_PREVENT
  499. #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
  500.   #define EXTRUDER_RUNOUT_MINTEMP 190
  501.   #define EXTRUDER_RUNOUT_SECONDS 30
  502.   #define EXTRUDER_RUNOUT_SPEED 1500  // (mm/min)
  503.   #define EXTRUDER_RUNOUT_EXTRUDE 5   // (mm)
  504. #endif
  505.  
  506. /**
  507.  * Hotend Idle Timeout
  508.  * Prevent filament in the nozzle from charring and causing a critical jam.
  509.  */
  510. //#define HOTEND_IDLE_TIMEOUT
  511. #if ENABLED(HOTEND_IDLE_TIMEOUT)
  512.   #define HOTEND_IDLE_TIMEOUT_SEC (5*60)    // (seconds) Time without extruder movement to trigger protection
  513.   #define HOTEND_IDLE_MIN_TRIGGER   180     // (°C) Minimum temperature to enable hotend protection
  514.   #define HOTEND_IDLE_NOZZLE_TARGET   0     // (°C) Safe temperature for the nozzle after timeout
  515.   #define HOTEND_IDLE_BED_TARGET      0     // (°C) Safe temperature for the bed after timeout
  516. #endif
  517.  
  518. // @section temperature
  519.  
  520. // Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
  521. // The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
  522. #define TEMP_SENSOR_AD595_OFFSET  0.0
  523. #define TEMP_SENSOR_AD595_GAIN    1.0
  524. #define TEMP_SENSOR_AD8495_OFFSET 0.0
  525. #define TEMP_SENSOR_AD8495_GAIN   1.0
  526.  
  527. // @section fans
  528.  
  529. /**
  530.  * Controller Fan
  531.  * To cool down the stepper drivers and MOSFETs.
  532.  *
  533.  * The fan turns on automatically whenever any driver is enabled and turns
  534.  * off (or reduces to idle speed) shortly after drivers are turned off.
  535.  */
  536. //#define USE_CONTROLLER_FAN
  537. #if ENABLED(USE_CONTROLLER_FAN)
  538.   //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
  539.   //#define CONTROLLER_FAN2_PIN -1          // Set a custom pin for second controller fan
  540.   //#define CONTROLLER_FAN_USE_Z_ONLY       // With this option only the Z axis is considered
  541.   //#define CONTROLLER_FAN_IGNORE_Z         // Ignore Z stepper. Useful when stepper timeout is disabled.
  542.   #define CONTROLLERFAN_SPEED_MIN         0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
  543.   #define CONTROLLERFAN_SPEED_ACTIVE    255 // (0-255) Active speed, used when any motor is enabled
  544.   #define CONTROLLERFAN_SPEED_IDLE        0 // (0-255) Idle speed, used when motors are disabled
  545.   #define CONTROLLERFAN_IDLE_TIME        60 // (seconds) Extra time to keep the fan running after disabling motors
  546.  
  547.   // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
  548.   //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40  // (°C) Turn on the fan if the board reaches this temperature
  549.  
  550.   //#define CONTROLLER_FAN_EDITABLE         // Enable M710 configurable settings
  551.   #if ENABLED(CONTROLLER_FAN_EDITABLE)
  552.     #define CONTROLLER_FAN_MENU             // Enable the Controller Fan submenu
  553.   #endif
  554. #endif
  555.  
  556. /**
  557.  * Fan Kickstart
  558.  * When part cooling or controller fans first start, run at a speed that
  559.  * gets it spinning reliably for a short time before setting the requested speed.
  560.  * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
  561.  */
  562. //#define FAN_KICKSTART_TIME  100  // (ms)
  563. //#define FAN_KICKSTART_POWER 180  // 64-255
  564.  
  565. // Some coolers may require a non-zero "off" state.
  566. //#define FAN_OFF_PWM  1
  567.  
  568. /**
  569.  * PWM Fan Scaling
  570.  *
  571.  * Define the min/max speeds for PWM fans (as set with M106).
  572.  *
  573.  * With these options the M106 0-255 value range is scaled to a subset
  574.  * to ensure that the fan has enough power to spin, or to run lower
  575.  * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
  576.  * Value 0 always turns off the fan.
  577.  *
  578.  * Define one or both of these to override the default 0-255 range.
  579.  */
  580. //#define FAN_MIN_PWM 50
  581. //#define FAN_MAX_PWM 128
  582.  
  583. /**
  584.  * Fan Fast PWM
  585.  *
  586.  * Combinations of PWM Modes, prescale values and TOP resolutions are used internally
  587.  * to produce a frequency as close as possible to the desired frequency.
  588.  *
  589.  * FAST_PWM_FAN_FREQUENCY
  590.  *   Set this to your desired frequency.
  591.  *   For AVR, if left undefined this defaults to F = F_CPU/(2*255*1)
  592.  *            i.e., F = 31.4kHz on 16MHz micro-controllers or F = 39.2kHz on 20MHz micro-controllers.
  593.  *   For non AVR, if left undefined this defaults to F = 1Khz.
  594.  *   This F value is only to protect the hardware from an absence of configuration
  595.  *   and not to complete it when users are not aware that the frequency must be specifically set to support the target board.
  596.  *
  597.  *   NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
  598.  *         Setting very high frequencies can damage your hardware.
  599.  *
  600.  * USE_OCR2A_AS_TOP [undefined by default]
  601.  *   Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
  602.  *   16MHz MCUs: [62.5kHz, 31.4kHz (default), 7.8kHz, 3.92kHz, 1.95kHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
  603.  *   20MHz MCUs: [78.1kHz, 39.2kHz (default), 9.77kHz, 4.9kHz, 2.44kHz, 1.22kHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
  604.  *   A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
  605.  *   PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
  606.  *   USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  607.  */
  608. //#define FAST_PWM_FAN    // Increase the fan PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  609. #if ENABLED(FAST_PWM_FAN)
  610.   //#define FAST_PWM_FAN_FREQUENCY 31400  // Define here to override the defaults below
  611.   //#define USE_OCR2A_AS_TOP
  612.   #ifndef FAST_PWM_FAN_FREQUENCY
  613.     #ifdef __AVR__
  614.       #define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1))
  615.     #else
  616.       #define FAST_PWM_FAN_FREQUENCY 1000U
  617.     #endif
  618.   #endif
  619. #endif
  620.  
  621. /**
  622.  * Use one of the PWM fans as a redundant part-cooling fan
  623.  */
  624. //#define REDUNDANT_PART_COOLING_FAN 2  // Index of the fan to sync with FAN 0.
  625.  
  626. /**
  627.  * Extruder cooling fans
  628.  *
  629.  * Extruder auto fans automatically turn on when their extruders'
  630.  * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
  631.  *
  632.  * Your board's pins file specifies the recommended pins. Override those here
  633.  * or set to -1 to disable completely.
  634.  *
  635.  * Multiple extruders can be assigned to the same pin in which case
  636.  * the fan will turn on when any selected extruder is above the threshold.
  637.  */
  638. #define E0_AUTO_FAN_PIN -1
  639. #define E1_AUTO_FAN_PIN -1
  640. #define E2_AUTO_FAN_PIN -1
  641. #define E3_AUTO_FAN_PIN -1
  642. #define E4_AUTO_FAN_PIN -1
  643. #define E5_AUTO_FAN_PIN -1
  644. #define E6_AUTO_FAN_PIN -1
  645. #define E7_AUTO_FAN_PIN -1
  646. #define CHAMBER_AUTO_FAN_PIN -1
  647. #define COOLER_AUTO_FAN_PIN -1
  648.  
  649. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  650. #define EXTRUDER_AUTO_FAN_SPEED 255   // 255 == full speed
  651. #define CHAMBER_AUTO_FAN_TEMPERATURE 30
  652. #define CHAMBER_AUTO_FAN_SPEED 255
  653. #define COOLER_AUTO_FAN_TEMPERATURE 18
  654. #define COOLER_AUTO_FAN_SPEED 255
  655.  
  656. /**
  657.  * Hotend Cooling Fans tachometers
  658.  *
  659.  * Define one or more tachometer pins to enable fan speed
  660.  * monitoring, and reporting of fan speeds with M123.
  661.  *
  662.  * NOTE: Only works with fans up to 7000 RPM.
  663.  */
  664. //#define FOURWIRES_FANS      // Needed with AUTO_FAN when 4-wire PWM fans are installed
  665. //#define E0_FAN_TACHO_PIN -1
  666. //#define E0_FAN_TACHO_PULLUP
  667. //#define E0_FAN_TACHO_PULLDOWN
  668. //#define E1_FAN_TACHO_PIN -1
  669. //#define E1_FAN_TACHO_PULLUP
  670. //#define E1_FAN_TACHO_PULLDOWN
  671. //#define E2_FAN_TACHO_PIN -1
  672. //#define E2_FAN_TACHO_PULLUP
  673. //#define E2_FAN_TACHO_PULLDOWN
  674. //#define E3_FAN_TACHO_PIN -1
  675. //#define E3_FAN_TACHO_PULLUP
  676. //#define E3_FAN_TACHO_PULLDOWN
  677. //#define E4_FAN_TACHO_PIN -1
  678. //#define E4_FAN_TACHO_PULLUP
  679. //#define E4_FAN_TACHO_PULLDOWN
  680. //#define E5_FAN_TACHO_PIN -1
  681. //#define E5_FAN_TACHO_PULLUP
  682. //#define E5_FAN_TACHO_PULLDOWN
  683. //#define E6_FAN_TACHO_PIN -1
  684. //#define E6_FAN_TACHO_PULLUP
  685. //#define E6_FAN_TACHO_PULLDOWN
  686. //#define E7_FAN_TACHO_PIN -1
  687. //#define E7_FAN_TACHO_PULLUP
  688. //#define E7_FAN_TACHO_PULLDOWN
  689.  
  690. /**
  691.  * Part-Cooling Fan Multiplexer
  692.  *
  693.  * This feature allows you to digitally multiplex the fan output.
  694.  * The multiplexer is automatically switched at tool-change.
  695.  * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
  696.  */
  697. #define FANMUX0_PIN -1
  698. #define FANMUX1_PIN -1
  699. #define FANMUX2_PIN -1
  700.  
  701. /**
  702.  * @section caselight
  703.  * M355 Case Light on-off / brightness
  704.  */
  705. //#define CASE_LIGHT_ENABLE
  706. #if ENABLED(CASE_LIGHT_ENABLE)
  707.   //#define CASE_LIGHT_PIN 4                  // Override the default pin if needed
  708.   #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
  709.   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
  710.   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
  711.   //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
  712.   //#define CASE_LIGHT_MAX_PWM 128            // Limit PWM duty cycle (0-255)
  713.   //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
  714.   #if ENABLED(NEOPIXEL_LED)
  715.     //#define CASE_LIGHT_USE_NEOPIXEL         // Use NeoPixel LED as case light
  716.   #endif
  717.   #if EITHER(RGB_LED, RGBW_LED)
  718.     //#define CASE_LIGHT_USE_RGB_LED          // Use RGB / RGBW LED as case light
  719.   #endif
  720.   #if EITHER(CASE_LIGHT_USE_NEOPIXEL, CASE_LIGHT_USE_RGB_LED)
  721.     #define CASE_LIGHT_DEFAULT_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
  722.   #endif
  723. #endif
  724.  
  725. // @section endstops
  726.  
  727. // If you want endstops to stay on (by default) even when not homing
  728. // enable this option. Override at any time with M120, M121.
  729. //#define ENDSTOPS_ALWAYS_ON_DEFAULT
  730.  
  731. // @section extras
  732.  
  733. //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
  734.  
  735. // Employ an external closed loop controller. Override pins here if needed.
  736. //#define EXTERNAL_CLOSED_LOOP_CONTROLLER
  737. #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
  738.   //#define CLOSED_LOOP_ENABLE_PIN        -1
  739.   //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
  740. #endif
  741.  
  742. // @section idex
  743.  
  744. /**
  745.  * Dual X Carriage
  746.  *
  747.  * This setup has two X carriages that can move independently, each with its own hotend.
  748.  * The carriages can be used to print an object with two colors or materials, or in
  749.  * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
  750.  * The inactive carriage is parked automatically to prevent oozing.
  751.  * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
  752.  * By default the X2 stepper is assigned to the first unused E plug on the board.
  753.  *
  754.  * The following Dual X Carriage modes can be selected with M605 S<mode>:
  755.  *
  756.  *   0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
  757.  *       results as long as it supports dual X-carriages. (M605 S0)
  758.  *
  759.  *   1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
  760.  *       that additional slicer support is not required. (M605 S1)
  761.  *
  762.  *   2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
  763.  *       the first X-carriage and extruder, to print 2 copies of the same object at the same time.
  764.  *       Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
  765.  *       follow with M605 S2 to initiate duplicated movement.
  766.  *
  767.  *   3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
  768.  *       the movement of the first except the second extruder is reversed in the X axis.
  769.  *       Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
  770.  *       follow with M605 S3 to initiate mirrored movement.
  771.  */
  772. //#define DUAL_X_CARRIAGE
  773. #if ENABLED(DUAL_X_CARRIAGE)
  774.   #define X1_MIN_POS X_MIN_POS    // Set to X_MIN_POS
  775.   #define X1_MAX_POS X_BED_SIZE   // A max coordinate so the X1 carriage can't hit the parked X2 carriage
  776.   #define X2_MIN_POS    80        // A min coordinate so the X2 carriage can't hit the parked X1 carriage
  777.   #define X2_MAX_POS   353        // The max position of the X2 carriage, typically also the home position
  778.   #define X2_HOME_POS X2_MAX_POS  // Default X2 home position. Set to X2_MAX_POS.
  779.                                   // NOTE: For Dual X Carriage use M218 T1 Xn to override the X2_HOME_POS.
  780.                                   // This allows recalibration of endstops distance without a rebuild.
  781.                                   // Remember to set the second extruder's X-offset to 0 in your slicer.
  782.  
  783.   // This is the default power-up mode which can be changed later using M605 S<mode>.
  784.   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
  785.  
  786.   // Default x offset in duplication mode (typically set to half print bed width)
  787.   #define DEFAULT_DUPLICATION_X_OFFSET 100
  788.  
  789.   // Default action to execute following M605 mode change commands. Typically G28X to apply new mode.
  790.   //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X"
  791. #endif
  792.  
  793. // @section multi stepper
  794.  
  795. /**
  796.  * Multi-Stepper / Multi-Endstop
  797.  *
  798.  * When X2_DRIVER_TYPE is defined, this indicates that the X and X2 motors work in tandem.
  799.  * The following explanations for X also apply to Y and Z multi-stepper setups.
  800.  * Endstop offsets may be changed by 'M666 X<offset> Y<offset> Z<offset>' and stored to EEPROM.
  801.  *
  802.  * - Enable INVERT_X2_VS_X_DIR if the X2 motor requires an opposite DIR signal from X.
  803.  *
  804.  * - Enable X_DUAL_ENDSTOPS if the second motor has its own endstop, with adjustable offset.
  805.  *
  806.  *   - Extra endstops are included in the output of 'M119'.
  807.  *
  808.  *   - Set X_DUAL_ENDSTOP_ADJUSTMENT to the known error in the X2 endstop.
  809.  *     Applied to the X2 motor on 'G28' / 'G28 X'.
  810.  *     Get the offset by homing X and measuring the error.
  811.  *     Also set with 'M666 X<offset>' and stored to EEPROM with 'M500'.
  812.  *
  813.  *   - Use X2_USE_ENDSTOP to set the endstop plug by name. (_XMIN_, _XMAX_, _YMIN_, _YMAX_, _ZMIN_, _ZMAX_)
  814.  */
  815. #if HAS_X2_STEPPER && DISABLED(DUAL_X_CARRIAGE)
  816.   //#define INVERT_X2_VS_X_DIR        // X2 direction signal is the opposite of X
  817.   //#define X_DUAL_ENDSTOPS           // X2 has its own endstop
  818.   #if ENABLED(X_DUAL_ENDSTOPS)
  819.     #define X2_USE_ENDSTOP    _XMAX_  // X2 endstop board plug. Don't forget to enable USE_*_PLUG.
  820.     #define X2_ENDSTOP_ADJUSTMENT  0  // X2 offset relative to X endstop
  821.   #endif
  822. #endif
  823.  
  824. #if HAS_DUAL_Y_STEPPERS
  825.   //#define INVERT_Y2_VS_Y_DIR        // Y2 direction signal is the opposite of Y
  826.   //#define Y_DUAL_ENDSTOPS           // Y2 has its own endstop
  827.   #if ENABLED(Y_DUAL_ENDSTOPS)
  828.     #define Y2_USE_ENDSTOP    _YMAX_  // Y2 endstop board plug. Don't forget to enable USE_*_PLUG.
  829.     #define Y2_ENDSTOP_ADJUSTMENT  0  // Y2 offset relative to Y endstop
  830.   #endif
  831. #endif
  832.  
  833. //
  834. // Multi-Z steppers
  835. //
  836. #ifdef Z2_DRIVER_TYPE
  837.   //#define INVERT_Z2_VS_Z_DIR        // Z2 direction signal is the opposite of Z
  838.  
  839.   //#define Z_MULTI_ENDSTOPS          // Other Z axes have their own endstops
  840.   #if ENABLED(Z_MULTI_ENDSTOPS)
  841.     #define Z2_USE_ENDSTOP   _XMAX_   // Z2 endstop board plug. Don't forget to enable USE_*_PLUG.
  842.     #define Z2_ENDSTOP_ADJUSTMENT 0   // Z2 offset relative to Z endstop
  843.   #endif
  844.   #ifdef Z3_DRIVER_TYPE
  845.     //#define INVERT_Z3_VS_Z_DIR      // Z3 direction signal is the opposite of Z
  846.     #if ENABLED(Z_MULTI_ENDSTOPS)
  847.       #define Z3_USE_ENDSTOP   _YMAX_ // Z3 endstop board plug. Don't forget to enable USE_*_PLUG.
  848.       #define Z3_ENDSTOP_ADJUSTMENT 0 // Z3 offset relative to Z endstop
  849.     #endif
  850.   #endif
  851.   #ifdef Z4_DRIVER_TYPE
  852.     //#define INVERT_Z4_VS_Z_DIR      // Z4 direction signal is the opposite of Z
  853.     #if ENABLED(Z_MULTI_ENDSTOPS)
  854.       #define Z4_USE_ENDSTOP   _ZMAX_ // Z4 endstop board plug. Don't forget to enable USE_*_PLUG.
  855.       #define Z4_ENDSTOP_ADJUSTMENT 0 // Z4 offset relative to Z endstop
  856.     #endif
  857.   #endif
  858. #endif
  859.  
  860. // Drive the E axis with two synchronized steppers
  861. //#define E_DUAL_STEPPER_DRIVERS
  862. #if ENABLED(E_DUAL_STEPPER_DRIVERS)
  863.   //#define INVERT_E1_VS_E0_DIR       // E direction signals are opposites
  864. #endif
  865.  
  866. // @section extruder
  867.  
  868. // Activate a solenoid on the active extruder with M380. Disable all with M381.
  869. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
  870. //#define EXT_SOLENOID
  871.  
  872. // @section homing
  873.  
  874. /**
  875.  * Homing Procedure
  876.  * Homing (G28) does an indefinite move towards the endstops to establish
  877.  * the position of the toolhead relative to the workspace.
  878.  */
  879.  
  880. //#define SENSORLESS_BACKOFF_MM  { 2, 2, 0 }  // (linear=mm, rotational=°) Backoff from endstops before sensorless homing
  881.  
  882. #define HOMING_BUMP_MM      { 5, 5, 2 }       // (linear=mm, rotational=°) Backoff from endstops after first bump
  883. #define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
  884.  
  885. //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
  886. //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa
  887.  
  888. //#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
  889. //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
  890. //#define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
  891. //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
  892.  
  893. // @section bltouch
  894.  
  895. #if ENABLED(BLTOUCH)
  896.   /**
  897.    * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
  898.    * Do not activate settings that the probe might not understand. Clones might misunderstand
  899.    * advanced commands.
  900.    *
  901.    * Note: If the probe is not deploying, do a "Reset" and "Self-Test" and then check the
  902.    *       wiring of the BROWN, RED and ORANGE wires.
  903.    *
  904.    * Note: If the trigger signal of your probe is not being recognized, it has been very often
  905.    *       because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
  906.    *       like they would be with a real switch. So please check the wiring first.
  907.    *
  908.    * Settings for all BLTouch and clone probes:
  909.    */
  910.  
  911.   // Safety: The probe needs time to recognize the command.
  912.   //         Minimum command delay (ms). Enable and increase if needed.
  913.   //#define BLTOUCH_DELAY 500
  914.  
  915.   /**
  916.    * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
  917.    */
  918.  
  919.   // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
  920.   //          in special cases, like noisy or filtered input configurations.
  921.   //#define BLTOUCH_FORCE_SW_MODE
  922.  
  923.   /**
  924.    * Settings for BLTouch Smart 3.0 and 3.1
  925.    * Summary:
  926.    *   - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
  927.    *   - High-Speed mode
  928.    *   - Disable LCD voltage options
  929.    */
  930.  
  931.   /**
  932.    * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
  933.    * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
  934.    * If disabled, OD mode is the hard-coded default on 3.0
  935.    * On startup, Marlin will compare its EEPROM to this value. If the selected mode
  936.    * differs, a mode set EEPROM write will be completed at initialization.
  937.    * Use the option below to force an EEPROM write to a V3.1 probe regardless.
  938.    */
  939.   //#define BLTOUCH_SET_5V_MODE
  940.  
  941.   // Safety: Enable voltage mode settings in the LCD menu.
  942.   //#define BLTOUCH_LCD_VOLTAGE_MENU
  943.  
  944.   /**
  945.    * Safety: Activate if connecting a probe with an unknown voltage mode.
  946.    * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
  947.    * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
  948.    * To preserve the life of the probe, use this once then turn it off and re-flash.
  949.    */
  950.   //#define BLTOUCH_FORCE_MODE_SET
  951.  
  952.   /**
  953.    * Enable "HIGH SPEED" option for probing.
  954.    * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
  955.    * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians
  956.    * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM.
  957.    *
  958.    * Set the default state here, change with 'M401 S' or UI, use M500 to save, M502 to reset.
  959.    */
  960.   //#define BLTOUCH_HS_MODE true
  961.  
  962.  
  963. #endif // BLTOUCH
  964.  
  965. // @section calibration
  966.  
  967. /**
  968.  * Z Steppers Auto-Alignment
  969.  * Add the G34 command to align multiple Z steppers using a bed probe.
  970.  */
  971. //#define Z_STEPPER_AUTO_ALIGN
  972. #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  973.   /**
  974.    * Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
  975.    * These positions are machine-relative and do not shift with the M206 home offset!
  976.    * If not defined, probe limits will be used.
  977.    * Override with 'M422 S<index> X<pos> Y<pos>'.
  978.    */
  979.   //#define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
  980.  
  981.   /**
  982.    * Orientation for the automatically-calculated probe positions.
  983.    * Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
  984.    *
  985.    * 2 Steppers:  (0)     (1)
  986.    *               |       |   2   |
  987.    *               | 1   2 |       |
  988.    *               |       |   1   |
  989.    *
  990.    * 3 Steppers:  (0)     (1)     (2)     (3)
  991.    *               |   3   | 1     | 2   1 |     2 |
  992.    *               |       |     3 |       | 3     |
  993.    *               | 1   2 | 2     |   3   |     1 |
  994.    *
  995.    * 4 Steppers:  (0)     (1)     (2)     (3)
  996.    *               | 4   3 | 1   4 | 2   1 | 3   2 |
  997.    *               |       |       |       |       |
  998.    *               | 1   2 | 2   3 | 3   4 | 4   1 |
  999.    */
  1000.   #ifndef Z_STEPPER_ALIGN_XY
  1001.     //#define Z_STEPPERS_ORIENTATION 0
  1002.   #endif
  1003.  
  1004.   /**
  1005.    * Z Stepper positions for more rapid convergence in bed alignment.
  1006.    * Requires 3 or 4 Z steppers.
  1007.    *
  1008.    * Define Stepper XY positions for Z1, Z2, Z3... corresponding to the screw
  1009.    * positions in the bed carriage, with one position per Z stepper in stepper
  1010.    * driver order.
  1011.    */
  1012.   //#define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  1013.  
  1014.   #ifndef Z_STEPPER_ALIGN_STEPPER_XY
  1015.     // Amplification factor. Used to scale the correction step up or down in case
  1016.     // the stepper (spindle) position is farther out than the test point.
  1017.     #define Z_STEPPER_ALIGN_AMP 1.0       // Use a value > 1.0 NOTE: This may cause instability!
  1018.   #endif
  1019.  
  1020.   // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
  1021.   #define G34_MAX_GRADE              5    // (%) Maximum incline that G34 will handle
  1022.   #define Z_STEPPER_ALIGN_ITERATIONS 5    // Number of iterations to apply during alignment
  1023.   #define Z_STEPPER_ALIGN_ACC        0.02 // Stop iterating early if the accuracy is better than this
  1024.   #define RESTORE_LEVELING_AFTER_G34      // Restore leveling after G34 is done?
  1025.   // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
  1026.   // Re-homing might be more precise in reproducing the actual 'G28 Z' homing height, especially on an uneven bed.
  1027.   #define HOME_AFTER_G34
  1028. #endif
  1029.  
  1030. //
  1031. // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
  1032. //
  1033. //#define ASSISTED_TRAMMING
  1034. #if ENABLED(ASSISTED_TRAMMING)
  1035.  
  1036.   // Define from 3 to 9 points to probe.
  1037.   #define TRAMMING_POINT_XY { {  20, 20 }, { 180,  20 }, { 180, 180 }, { 20, 180 } }
  1038.  
  1039.   // Define position names for probe points.
  1040.   #define TRAMMING_POINT_NAME_1 "Front-Left"
  1041.   #define TRAMMING_POINT_NAME_2 "Front-Right"
  1042.   #define TRAMMING_POINT_NAME_3 "Back-Right"
  1043.   #define TRAMMING_POINT_NAME_4 "Back-Left"
  1044.  
  1045.   #define RESTORE_LEVELING_AFTER_G35    // Enable to restore leveling setup after operation
  1046.   //#define REPORT_TRAMMING_MM          // Report Z deviation (mm) for each point relative to the first
  1047.  
  1048.   //#define ASSISTED_TRAMMING_WIZARD    // Add a Tramming Wizard to the LCD menu
  1049.  
  1050.   //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
  1051.  
  1052.   /**
  1053.    * Screw thread:
  1054.    *   M3: 30 = Clockwise, 31 = Counter-Clockwise
  1055.    *   M4: 40 = Clockwise, 41 = Counter-Clockwise
  1056.    *   M5: 50 = Clockwise, 51 = Counter-Clockwise
  1057.    */
  1058.   #define TRAMMING_SCREW_THREAD 30
  1059.  
  1060. #endif
  1061.  
  1062. // @section motion control
  1063.  
  1064. /**
  1065.  * Input Shaping -- EXPERIMENTAL
  1066.  *
  1067.  * Zero Vibration (ZV) Input Shaping for X and/or Y movements.
  1068.  *
  1069.  * This option uses a lot of SRAM for the step buffer. The buffer size is
  1070.  * calculated automatically from SHAPING_FREQ_[XY], DEFAULT_AXIS_STEPS_PER_UNIT,
  1071.  * DEFAULT_MAX_FEEDRATE and ADAPTIVE_STEP_SMOOTHING. The default calculation can
  1072.  * be overridden by setting SHAPING_MIN_FREQ and/or SHAPING_MAX_FEEDRATE.
  1073.  * The higher the frequency and the lower the feedrate, the smaller the buffer.
  1074.  * If the buffer is too small at runtime, input shaping will have reduced
  1075.  * effectiveness during high speed movements.
  1076.  *
  1077.  * Tune with M593 D<factor> F<frequency>:
  1078.  *
  1079.  *  D<factor>    Set the zeta/damping factor. If axes (X, Y, etc.) are not specified, set for all axes.
  1080.  *  F<frequency> Set the frequency. If axes (X, Y, etc.) are not specified, set for all axes.
  1081.  *  T[map]       Input Shaping type, 0:ZV, 1:EI, 2:2H EI (not implemented yet)
  1082.  *  X<1>         Set the given parameters only for the X axis.
  1083.  *  Y<1>         Set the given parameters only for the Y axis.
  1084.  */
  1085. //#define INPUT_SHAPING_X
  1086. //#define INPUT_SHAPING_Y
  1087. #if EITHER(INPUT_SHAPING_X, INPUT_SHAPING_Y)
  1088.   #if ENABLED(INPUT_SHAPING_X)
  1089.     #define SHAPING_FREQ_X  40          // (Hz) The default dominant resonant frequency on the X axis.
  1090.     #define SHAPING_ZETA_X  0.15f       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
  1091.   #endif
  1092.   #if ENABLED(INPUT_SHAPING_Y)
  1093.     #define SHAPING_FREQ_Y  40          // (Hz) The default dominant resonant frequency on the Y axis.
  1094.     #define SHAPING_ZETA_Y  0.15f       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
  1095.   #endif
  1096.   //#define SHAPING_MIN_FREQ  20        // By default the minimum of the shaping frequencies. Override to affect SRAM usage.
  1097.   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
  1098.   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.
  1099. #endif
  1100.  
  1101. // @section motion
  1102.  
  1103. #define AXIS_RELATIVE_MODES { false, false, false, false }
  1104.  
  1105. // Add a Duplicate option for well-separated conjoined nozzles
  1106. //#define MULTI_NOZZLE_DUPLICATION
  1107.  
  1108. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
  1109. #define INVERT_X_STEP_PIN false
  1110. #define INVERT_Y_STEP_PIN false
  1111. #define INVERT_Z_STEP_PIN false
  1112. #define INVERT_I_STEP_PIN false
  1113. #define INVERT_J_STEP_PIN false
  1114. #define INVERT_K_STEP_PIN false
  1115. #define INVERT_U_STEP_PIN false
  1116. #define INVERT_V_STEP_PIN false
  1117. #define INVERT_W_STEP_PIN false
  1118. #define INVERT_E_STEP_PIN false
  1119.  
  1120. /**
  1121.  * Idle Stepper Shutdown
  1122.  * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
  1123.  * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  1124.  */
  1125. #define DEFAULT_STEPPER_TIMEOUT_SEC 120
  1126. #define DISABLE_IDLE_X
  1127. #define DISABLE_IDLE_Y
  1128. #define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
  1129. //#define DISABLE_IDLE_I
  1130. //#define DISABLE_IDLE_J
  1131. //#define DISABLE_IDLE_K
  1132. //#define DISABLE_IDLE_U
  1133. //#define DISABLE_IDLE_V
  1134. //#define DISABLE_IDLE_W
  1135. #define DISABLE_IDLE_E    // Shut down all idle extruders
  1136.  
  1137. // Default Minimum Feedrates for printing and travel moves
  1138. #define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s. °/s for rotational-only moves) Minimum feedrate. Set with M205 S.
  1139. #define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s. °/s for rotational-only moves) Minimum travel feedrate. Set with M205 T.
  1140.  
  1141. // Minimum time that a segment needs to take as the buffer gets emptied
  1142. #define DEFAULT_MINSEGMENTTIME        20000   // (µs) Set with M205 B.
  1143.  
  1144. // Slow down the machine if the lookahead buffer is (by default) half full.
  1145. // Increase the slowdown divisor for larger buffer sizes.
  1146. #define SLOWDOWN
  1147. #if ENABLED(SLOWDOWN)
  1148.   #define SLOWDOWN_DIVISOR 2
  1149. #endif
  1150.  
  1151. /**
  1152.  * XY Frequency limit
  1153.  * Reduce resonance by limiting the frequency of small zigzag infill moves.
  1154.  * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
  1155.  * Use M201 F<freq> G<min%> to change limits at runtime.
  1156.  */
  1157. //#define XY_FREQUENCY_LIMIT      10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
  1158. #ifdef XY_FREQUENCY_LIMIT
  1159.   #define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 G<min%>.
  1160. #endif
  1161.  
  1162. // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
  1163. // of the buffer and all stops. This should not be much greater than zero and should only be changed
  1164. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
  1165. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
  1166.  
  1167. //
  1168. // Backlash Compensation
  1169. // Adds extra movement to axes on direction-changes to account for backlash.
  1170. //
  1171. //#define BACKLASH_COMPENSATION
  1172. #if ENABLED(BACKLASH_COMPENSATION)
  1173.   // Define values for backlash distance and correction.
  1174.   // If BACKLASH_GCODE is enabled these values are the defaults.
  1175.   #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (linear=mm, rotational=°) One value for each linear axis
  1176.   #define BACKLASH_CORRECTION    0.0       // 0.0 = no correction; 1.0 = full correction
  1177.  
  1178.   // Add steps for motor direction changes on CORE kinematics
  1179.   //#define CORE_BACKLASH
  1180.  
  1181.   // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
  1182.   // to reduce print artifacts. (Enabling this is costly in memory and computation!)
  1183.   //#define BACKLASH_SMOOTHING_MM 3 // (mm)
  1184.  
  1185.   // Add runtime configuration and tuning of backlash values (M425)
  1186.   //#define BACKLASH_GCODE
  1187.  
  1188.   #if ENABLED(BACKLASH_GCODE)
  1189.     // Measure the Z backlash when probing (G29) and set with "M425 Z"
  1190.     #define MEASURE_BACKLASH_WHEN_PROBING
  1191.  
  1192.     #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
  1193.       // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
  1194.       // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
  1195.       // increments while checking for the contact to be broken.
  1196.       #define BACKLASH_MEASUREMENT_LIMIT       0.5   // (mm)
  1197.       #define BACKLASH_MEASUREMENT_RESOLUTION  0.005 // (mm)
  1198.       #define BACKLASH_MEASUREMENT_FEEDRATE    Z_PROBE_FEEDRATE_SLOW // (mm/min)
  1199.     #endif
  1200.   #endif
  1201. #endif
  1202.  
  1203. /**
  1204.  * Automatic backlash, position, and hotend offset calibration
  1205.  *
  1206.  * Enable G425 to run automatic calibration using an electrically-
  1207.  * conductive cube, bolt, or washer mounted on the bed.
  1208.  *
  1209.  * G425 uses the probe to touch the top and sides of the calibration object
  1210.  * on the bed and measures and/or correct positional offsets, axis backlash
  1211.  * and hotend offsets.
  1212.  *
  1213.  * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within
  1214.  *       ±5mm of true values for G425 to succeed.
  1215.  */
  1216. //#define CALIBRATION_GCODE
  1217. #if ENABLED(CALIBRATION_GCODE)
  1218.  
  1219.   //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
  1220.   //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
  1221.  
  1222.   #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
  1223.  
  1224.   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
  1225.   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
  1226.   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
  1227.  
  1228.   // The following parameters refer to the conical section of the nozzle tip.
  1229.   #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
  1230.   #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // mm
  1231.  
  1232.   // Uncomment to enable reporting (required for "G425 V", but consumes flash).
  1233.   //#define CALIBRATION_REPORTING
  1234.  
  1235.   // The true location and dimension the cube/bolt/washer on the bed.
  1236.   #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
  1237.   #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
  1238.  
  1239.   // Comment out any sides which are unreachable by the probe. For best
  1240.   // auto-calibration results, all sides must be reachable.
  1241.   #define CALIBRATION_MEASURE_RIGHT
  1242.   #define CALIBRATION_MEASURE_FRONT
  1243.   #define CALIBRATION_MEASURE_LEFT
  1244.   #define CALIBRATION_MEASURE_BACK
  1245.  
  1246.   //#define CALIBRATION_MEASURE_IMIN
  1247.   //#define CALIBRATION_MEASURE_IMAX
  1248.   //#define CALIBRATION_MEASURE_JMIN
  1249.   //#define CALIBRATION_MEASURE_JMAX
  1250.   //#define CALIBRATION_MEASURE_KMIN
  1251.   //#define CALIBRATION_MEASURE_KMAX
  1252.   //#define CALIBRATION_MEASURE_UMIN
  1253.   //#define CALIBRATION_MEASURE_UMAX
  1254.   //#define CALIBRATION_MEASURE_VMIN
  1255.   //#define CALIBRATION_MEASURE_VMAX
  1256.   //#define CALIBRATION_MEASURE_WMIN
  1257.   //#define CALIBRATION_MEASURE_WMAX
  1258.  
  1259.   // Probing at the exact top center only works if the center is flat. If
  1260.   // probing on a screw head or hollow washer, probe near the edges.
  1261.   //#define CALIBRATION_MEASURE_AT_TOP_EDGES
  1262.  
  1263.   // Define the pin to read during calibration
  1264.   #ifndef CALIBRATION_PIN
  1265.     //#define CALIBRATION_PIN -1            // Define here to override the default pin
  1266.     #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
  1267.     //#define CALIBRATION_PIN_PULLDOWN
  1268.     #define CALIBRATION_PIN_PULLUP
  1269.   #endif
  1270. #endif
  1271.  
  1272. /**
  1273.  * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
  1274.  * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
  1275.  * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  1276.  * lowest stepping frequencies.
  1277.  */
  1278. //#define ADAPTIVE_STEP_SMOOTHING
  1279.  
  1280. /**
  1281.  * Custom Microstepping
  1282.  * Override as-needed for your setup. Up to 3 MS pins are supported.
  1283.  */
  1284. //#define MICROSTEP1 LOW,LOW,LOW
  1285. //#define MICROSTEP2 HIGH,LOW,LOW
  1286. //#define MICROSTEP4 LOW,HIGH,LOW
  1287. //#define MICROSTEP8 HIGH,HIGH,LOW
  1288. //#define MICROSTEP16 LOW,LOW,HIGH
  1289. //#define MICROSTEP32 HIGH,LOW,HIGH
  1290.  
  1291. // Microstep settings (Requires a board with pins named X_MS1, X_MS2, etc.)
  1292. #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
  1293.  
  1294. /**
  1295.  *  @section  stepper motor current
  1296.  *
  1297.  *  Some boards have a means of setting the stepper motor current via firmware.
  1298.  *
  1299.  *  The power on motor currents are set by:
  1300.  *    PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
  1301.  *                         known compatible chips: A4982
  1302.  *    DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
  1303.  *                         known compatible chips: AD5206
  1304.  *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
  1305.  *                         known compatible chips: MCP4728
  1306.  *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
  1307.  *                         known compatible chips: MCP4451, MCP4018
  1308.  *
  1309.  *  Motor currents can also be set by M907 - M910 and by the LCD.
  1310.  *    M907 - applies to all.
  1311.  *    M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
  1312.  *    M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  1313.  */
  1314. //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 }          // Values in milliamps
  1315. //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  1316. //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 }    // Default drive percent - X, Y, Z, E axis
  1317.  
  1318. /**
  1319.  * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
  1320.  */
  1321. //#define DIGIPOT_MCP4018             // Requires https://github.com/felias-fogg/SlowSoftI2CMaster
  1322. //#define DIGIPOT_MCP4451
  1323. #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
  1324.   #define DIGIPOT_I2C_NUM_CHANNELS 8  // 5DPRINT:4   AZTEEG_X3_PRO:8   MKS_SBASE:5   MIGHTYBOARD_REVE:5
  1325.  
  1326.   // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
  1327.   // These correspond to the physical drivers, so be mindful if the order is changed.
  1328.   #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
  1329.  
  1330.   //#define DIGIPOT_USE_RAW_VALUES    // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
  1331.  
  1332.   /**
  1333.    * Common slave addresses:
  1334.    *
  1335.    *                        A   (A shifted)   B   (B shifted)  IC
  1336.    * Smoothie              0x2C (0x58)       0x2D (0x5A)       MCP4451
  1337.    * AZTEEG_X3_PRO         0x2C (0x58)       0x2E (0x5C)       MCP4451
  1338.    * AZTEEG_X5_MINI        0x2C (0x58)       0x2E (0x5C)       MCP4451
  1339.    * AZTEEG_X5_MINI_WIFI         0x58              0x5C        MCP4451
  1340.    * MIGHTYBOARD_REVE      0x2F (0x5E)                         MCP4018
  1341.    */
  1342.   //#define DIGIPOT_I2C_ADDRESS_A 0x2C  // Unshifted slave address for first DIGIPOT
  1343.   //#define DIGIPOT_I2C_ADDRESS_B 0x2D  // Unshifted slave address for second DIGIPOT
  1344. #endif
  1345.  
  1346. //===========================================================================
  1347. //=============================Additional Features===========================
  1348. //===========================================================================
  1349.  
  1350. // @section lcd
  1351.  
  1352. #if HAS_MANUAL_MOVE_MENU
  1353.   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
  1354.   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
  1355.   #if IS_ULTIPANEL
  1356.     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
  1357.     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
  1358.   #endif
  1359. #endif
  1360.  
  1361. // Change values more rapidly when the encoder is rotated faster
  1362. #define ENCODER_RATE_MULTIPLIER
  1363. #if ENABLED(ENCODER_RATE_MULTIPLIER)
  1364.   #define ENCODER_10X_STEPS_PER_SEC   30  // (steps/s) Encoder rate for 10x speed
  1365.   #define ENCODER_100X_STEPS_PER_SEC  80  // (steps/s) Encoder rate for 100x speed
  1366. #endif
  1367.  
  1368. // Play a beep when the feedrate is changed from the Status Screen
  1369. //#define BEEP_ON_FEEDRATE_CHANGE
  1370. #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
  1371.   #define FEEDRATE_CHANGE_BEEP_DURATION   10
  1372.   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
  1373. #endif
  1374.  
  1375. //
  1376. // LCD Backlight Timeout
  1377. //
  1378. //#define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight
  1379.  
  1380. #if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
  1381.   //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
  1382.   #if ENABLED(PROBE_OFFSET_WIZARD)
  1383.     /**
  1384.      * Enable to init the Probe Z-Offset when starting the Wizard.
  1385.      * Use a height slightly above the estimated nozzle-to-probe Z offset.
  1386.      * For example, with an offset of -5, consider a starting height of -4.
  1387.      */
  1388.     //#define PROBE_OFFSET_WIZARD_START_Z -4.0
  1389.  
  1390.     // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
  1391.     //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
  1392.   #endif
  1393. #endif
  1394.  
  1395. #if HAS_MARLINUI_MENU
  1396.  
  1397.   #if HAS_BED_PROBE
  1398.     // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
  1399.     //#define X_AXIS_TWIST_COMPENSATION
  1400.     #if ENABLED(X_AXIS_TWIST_COMPENSATION)
  1401.       /**
  1402.        * Enable to init the Probe Z-Offset when starting the Wizard.
  1403.        * Use a height slightly above the estimated nozzle-to-probe Z offset.
  1404.        * For example, with an offset of -5, consider a starting height of -4.
  1405.        */
  1406.       #define XATC_START_Z 0.0
  1407.       #define XATC_MAX_POINTS 3             // Number of points to probe in the wizard
  1408.       #define XATC_Y_POSITION Y_CENTER      // (mm) Y position to probe
  1409.       #define XATC_Z_OFFSETS { 0, 0, 0 }    // Z offsets for X axis sample points
  1410.     #endif
  1411.  
  1412.     // Show Deploy / Stow Probe options in the Motion menu.
  1413.     #define PROBE_DEPLOY_STOW_MENU
  1414.   #endif
  1415.  
  1416.   // Include a page of printer information in the LCD Main Menu
  1417.   //#define LCD_INFO_MENU
  1418.   #if ENABLED(LCD_INFO_MENU)
  1419.     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  1420.   #endif
  1421.  
  1422.   // BACK menu items keep the highlight at the top
  1423.   //#define TURBO_BACK_MENU_ITEM
  1424.  
  1425.   // Insert a menu for preheating at the top level to allow for quick access
  1426.   //#define PREHEAT_SHORTCUT_MENU_ITEM
  1427.  
  1428. #endif // HAS_MARLINUI_MENU
  1429.  
  1430. #if ANY(HAS_DISPLAY, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
  1431.   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
  1432.   #define SOUND_ON_DEFAULT    // Buzzer/speaker default enabled state
  1433. #endif
  1434.  
  1435. #if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
  1436.   // The timeout to return to the status screen from sub-menus
  1437.   //#define LCD_TIMEOUT_TO_STATUS 15000   // (ms)
  1438.  
  1439.   #if ENABLED(SHOW_BOOTSCREEN)
  1440.     #define BOOTSCREEN_TIMEOUT 3000       // (ms) Total Duration to display the boot screen(s)
  1441.     #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
  1442.       #define BOOT_MARLIN_LOGO_SMALL      // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
  1443.     #endif
  1444.   #endif
  1445.  
  1446.   // Scroll a longer status message into view
  1447.   //#define STATUS_MESSAGE_SCROLLING
  1448.  
  1449.   // Apply a timeout to low-priority status messages
  1450.   //#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
  1451.  
  1452.   // On the Info Screen, display XY with one decimal place when possible
  1453.   //#define LCD_DECIMAL_SMALL_XY
  1454.  
  1455.   // Show the E position (filament used) during printing
  1456.   //#define LCD_SHOW_E_TOTAL
  1457.  
  1458.   /**
  1459.    * LED Control Menu
  1460.    * Add LED Control to the LCD menu
  1461.    */
  1462.   //#define LED_CONTROL_MENU
  1463.   #if ENABLED(LED_CONTROL_MENU)
  1464.     #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
  1465.     //#define NEO2_COLOR_PRESETS              // Enable a second NeoPixel Preset Color menu option
  1466.     #if ENABLED(LED_COLOR_PRESETS)
  1467.       #define LED_USER_PRESET_RED        255  // User defined RED value
  1468.       #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
  1469.       #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
  1470.       #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
  1471.       #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
  1472.       //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
  1473.     #endif
  1474.     #if ENABLED(NEO2_COLOR_PRESETS)
  1475.       #define NEO2_USER_PRESET_RED        255 // User defined RED value
  1476.       #define NEO2_USER_PRESET_GREEN      128 // User defined GREEN value
  1477.       #define NEO2_USER_PRESET_BLUE         0 // User defined BLUE value
  1478.       #define NEO2_USER_PRESET_WHITE      255 // User defined WHITE value
  1479.       #define NEO2_USER_PRESET_BRIGHTNESS 255 // User defined intensity
  1480.       //#define NEO2_USER_PRESET_STARTUP      // Have the printer display the user preset color on startup for the second strip
  1481.     #endif
  1482.   #endif
  1483.  
  1484. #endif // HAS_DISPLAY || DWIN_LCD_PROUI
  1485.  
  1486. // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
  1487. //#define SET_PROGRESS_MANUALLY
  1488. #if ENABLED(SET_PROGRESS_MANUALLY)
  1489.   #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
  1490.   #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
  1491.   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
  1492.   //#define M73_REPORT                    // Report M73 values to host
  1493.   #if BOTH(M73_REPORT, SDSUPPORT)
  1494.     #define M73_REPORT_SD_ONLY            // Report only when printing from SD
  1495.   #endif
  1496. #endif
  1497.  
  1498. // LCD Print Progress options. Multiple times may be displayed in turn.
  1499. #if HAS_DISPLAY && EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
  1500.   #define SHOW_PROGRESS_PERCENT           // Show print progress percentage (doesn't affect progress bar)
  1501.   #define SHOW_ELAPSED_TIME               // Display elapsed printing time (prefix 'E')
  1502.   //#define SHOW_REMAINING_TIME           // Display estimated time to completion (prefix 'R')
  1503.   #if ENABLED(SET_INTERACTION_TIME)
  1504.     #define SHOW_INTERACTION_TIME         // Display time until next user interaction ('C' = filament change)
  1505.   #endif
  1506.   //#define PRINT_PROGRESS_SHOW_DECIMALS  // Show/report progress with decimal digits, not all UIs support this
  1507.  
  1508.   #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
  1509.     //#define LCD_PROGRESS_BAR            // Show a progress bar on HD44780 LCDs for SD printing
  1510.     #if ENABLED(LCD_PROGRESS_BAR)
  1511.       #define PROGRESS_BAR_BAR_TIME 2000  // (ms) Amount of time to show the bar
  1512.       #define PROGRESS_BAR_MSG_TIME 3000  // (ms) Amount of time to show the status message
  1513.       #define PROGRESS_MSG_EXPIRE      0  // (ms) Amount of time to retain the status message (0=forever)
  1514.       //#define PROGRESS_MSG_ONCE         // Show the message for MSG_TIME then clear it
  1515.       //#define LCD_PROGRESS_BAR_TEST     // Add a menu item to test the progress bar
  1516.     #endif
  1517.   #endif
  1518. #endif
  1519.  
  1520. #if ENABLED(SDSUPPORT)
  1521.   /**
  1522.    * SD Card SPI Speed
  1523.    * May be required to resolve "volume init" errors.
  1524.    *
  1525.    * Enable and set to SPI_HALF_SPEED, SPI_QUARTER_SPEED, or SPI_EIGHTH_SPEED
  1526.    *  otherwise full speed will be applied.
  1527.    *
  1528.    * :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED']
  1529.    */
  1530.   //#define SD_SPI_SPEED SPI_HALF_SPEED
  1531.  
  1532.   // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
  1533.   // Enable this option and set to HIGH if your SD cards are incorrectly detected.
  1534.   //#define SD_DETECT_STATE HIGH
  1535.  
  1536.   //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
  1537.   //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)
  1538.  
  1539.   //#define GCODE_REPEAT_MARKERS            // Enable G-code M808 to set repeat markers and do looping
  1540.  
  1541.   #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls
  1542.  
  1543.   #define SD_FINISHED_STEPPERRELEASE true   // Disable steppers when SD Print is finished
  1544.   #define SD_FINISHED_RELEASECOMMAND "M84"  // Use "M84XYE" to keep Z enabled so your bed stays in place
  1545.  
  1546.   // Reverse SD sort to show "more recent" files first, according to the card's FAT.
  1547.   // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  1548.   #define SDCARD_RATHERRECENTFIRST
  1549.  
  1550.   #define SD_MENU_CONFIRM_START             // Confirm the selected SD file before printing
  1551.  
  1552.   //#define NO_SD_AUTOSTART                 // Remove auto#.g file support completely to save some Flash, SRAM
  1553.   //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
  1554.  
  1555.   //#define BROWSE_MEDIA_ON_INSERT          // Open the file browser when media is inserted
  1556.  
  1557.   //#define MEDIA_MENU_AT_TOP               // Force the media menu to be listed on the top of the main menu
  1558.  
  1559.   #define EVENT_GCODE_SD_ABORT "G28XY"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
  1560.  
  1561.   #if ENABLED(PRINTER_EVENT_LEDS)
  1562.     #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
  1563.   #endif
  1564.  
  1565.   /**
  1566.    * Continue after Power-Loss (Creality3D)
  1567.    *
  1568.    * Store the current state to the SD Card at the start of each layer
  1569.    * during SD printing. If the recovery file is found at boot time, present
  1570.    * an option on the LCD screen to continue the print from the last-known
  1571.    * point in the file.
  1572.    */
  1573.   //#define POWER_LOSS_RECOVERY
  1574.   #if ENABLED(POWER_LOSS_RECOVERY)
  1575.     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
  1576.     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
  1577.     //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
  1578.     //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
  1579.     //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
  1580.     //#define POWER_LOSS_PULLUP         // Set pullup / pulldown as appropriate for your sensor
  1581.     //#define POWER_LOSS_PULLDOWN
  1582.     //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
  1583.     //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
  1584.  
  1585.     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
  1586.     // especially with "vase mode" printing. Set too high and vases cannot be continued.
  1587.     #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
  1588.  
  1589.     // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
  1590.     //#define POWER_LOSS_RECOVER_ZHOME
  1591.     #if ENABLED(POWER_LOSS_RECOVER_ZHOME)
  1592.       //#define POWER_LOSS_ZHOME_POS { 0, 0 } // Safe XY position to home Z while avoiding objects on the bed
  1593.     #endif
  1594.   #endif
  1595.  
  1596.   /**
  1597.    * Sort SD file listings in alphabetical order.
  1598.    *
  1599.    * With this option enabled, items on SD cards will be sorted
  1600.    * by name for easier navigation.
  1601.    *
  1602.    * By default...
  1603.    *
  1604.    *  - Use the slowest -but safest- method for sorting.
  1605.    *  - Folders are sorted to the top.
  1606.    *  - The sort key is statically allocated.
  1607.    *  - No added G-code (M34) support.
  1608.    *  - 40 item sorting limit. (Items after the first 40 are unsorted.)
  1609.    *
  1610.    * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
  1611.    * compiler to calculate the worst-case usage and throw an error if the SRAM
  1612.    * limit is exceeded.
  1613.    *
  1614.    *  - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
  1615.    *  - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
  1616.    *  - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
  1617.    *  - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
  1618.    */
  1619.   //#define SDCARD_SORT_ALPHA
  1620.  
  1621.   // SD Card Sorting options
  1622.   #if ENABLED(SDCARD_SORT_ALPHA)
  1623.     #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
  1624.     #define SDSORT_FOLDERS     -1     // -1=above  0=none  1=below
  1625.     #define SDSORT_GCODE       false  // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
  1626.     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
  1627.     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
  1628.     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
  1629.     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
  1630.     #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
  1631.                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
  1632.   #endif
  1633.  
  1634.   // Allow international symbols in long filenames. To display correctly, the
  1635.   // LCD's font must contain the characters. Check your selected LCD language.
  1636.   //#define UTF_FILENAME_SUPPORT
  1637.  
  1638.   //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
  1639.   //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
  1640.   //#define M20_TIMESTAMP_SUPPORT         // Include timestamps by adding the 'T' flag to M20 commands
  1641.  
  1642.   //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
  1643.  
  1644.   //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
  1645.  
  1646.   /**
  1647.    * Abort SD printing when any endstop is triggered.
  1648.    * This feature is enabled with 'M540 S1' or from the LCD menu.
  1649.    * Endstops must be activated for this option to work.
  1650.    */
  1651.   //#define SD_ABORT_ON_ENDSTOP_HIT
  1652.   #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
  1653.     //#define SD_ABORT_ON_ENDSTOP_HIT_GCODE "G28XY" // G-code to run on endstop hit (e.g., "G28XY" or "G27")
  1654.   #endif
  1655.  
  1656.   //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
  1657.  
  1658.   //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
  1659.  
  1660.   /**
  1661.    * Support for USB thumb drives using an Arduino USB Host Shield or
  1662.    * equivalent MAX3421E breakout board. The USB thumb drive will appear
  1663.    * to Marlin as an SD card.
  1664.    *
  1665.    * The MAX3421E can be assigned the same pins as the SD card reader, with
  1666.    * the following pin mapping:
  1667.    *
  1668.    *    SCLK, MOSI, MISO --> SCLK, MOSI, MISO
  1669.    *    INT              --> SD_DETECT_PIN [1]
  1670.    *    SS               --> SDSS
  1671.    *
  1672.    * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
  1673.    */
  1674.   //#define USB_FLASH_DRIVE_SUPPORT
  1675.   #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
  1676.     /**
  1677.      * USB Host Shield Library
  1678.      *
  1679.      * - UHS2 uses no interrupts and has been production-tested
  1680.      *   on a LulzBot TAZ Pro with a 32-bit Archim board.
  1681.      *
  1682.      * - UHS3 is newer code with better USB compatibility. But it
  1683.      *   is less tested and is known to interfere with Servos.
  1684.      *   [1] This requires USB_INTR_PIN to be interrupt-capable.
  1685.      */
  1686.     //#define USE_UHS2_USB
  1687.     //#define USE_UHS3_USB
  1688.  
  1689.     #define DISABLE_DUE_SD_MMC // Disable USB Host access to USB Drive to prevent hangs on block access for DUE platform
  1690.  
  1691.     /**
  1692.      * Native USB Host supported by some boards (USB OTG)
  1693.      */
  1694.     //#define USE_OTG_USB_HOST
  1695.  
  1696.     #if DISABLED(USE_OTG_USB_HOST)
  1697.       #define USB_CS_PIN    SDSS
  1698.       #define USB_INTR_PIN  SD_DETECT_PIN
  1699.     #endif
  1700.   #endif
  1701.  
  1702.   /**
  1703.    * When using a bootloader that supports SD-Firmware-Flashing,
  1704.    * add a menu item to activate SD-FW-Update on the next reboot.
  1705.    *
  1706.    * Requires ATMEGA2560 (Arduino Mega)
  1707.    *
  1708.    * Tested with this bootloader:
  1709.    *   https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
  1710.    */
  1711.   //#define SD_FIRMWARE_UPDATE
  1712.   #if ENABLED(SD_FIRMWARE_UPDATE)
  1713.     #define SD_FIRMWARE_UPDATE_EEPROM_ADDR    0x1FF
  1714.     #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE   0xF0
  1715.     #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
  1716.   #endif
  1717.  
  1718.   /**
  1719.    * Enable this option if you have more than ~3K of unused flash space.
  1720.    * Marlin will embed all settings in the firmware binary as compressed data.
  1721.    * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'.
  1722.    * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'.
  1723.    */
  1724.   //#define CONFIGURATION_EMBEDDING
  1725.  
  1726.   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
  1727.   //#define BINARY_FILE_TRANSFER
  1728.  
  1729.   #if ENABLED(BINARY_FILE_TRANSFER)
  1730.     // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER
  1731.     //#define CUSTOM_FIRMWARE_UPLOAD
  1732.   #endif
  1733.  
  1734.   /**
  1735.    * Set this option to one of the following (or the board's defaults apply):
  1736.    *
  1737.    *           LCD - Use the SD drive in the external LCD controller.
  1738.    *       ONBOARD - Use the SD drive on the control board.
  1739.    *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
  1740.    *
  1741.    * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
  1742.    */
  1743.   #define SDCARD_CONNECTION _SDCARD_ONBOARD
  1744.  
  1745.   // Enable if SD detect is rendered useless (e.g., by using an SD extender)
  1746.   //#define NO_SD_DETECT
  1747.  
  1748.   /**
  1749.    * Multiple volume support - EXPERIMENTAL.
  1750.    * Adds 'M21 Pm' / 'M21 S' / 'M21 U' to mount SD Card / USB Drive.
  1751.    */
  1752.   //#define MULTI_VOLUME
  1753.   #if ENABLED(MULTI_VOLUME)
  1754.     #define VOLUME_SD_ONBOARD
  1755.     #define VOLUME_USB_FLASH_DRIVE
  1756.     #define DEFAULT_VOLUME SV_SD_ONBOARD
  1757.     #define DEFAULT_SHARED_VOLUME SV_USB_FLASH_DRIVE
  1758.   #endif
  1759.  
  1760. #endif // SDSUPPORT
  1761.  
  1762. /**
  1763.  * By default an onboard SD card reader may be shared as a USB mass-
  1764.  * storage device. This option hides the SD card from the host PC.
  1765.  */
  1766. //#define NO_SD_HOST_DRIVE   // Disable SD Card access over USB (for security).
  1767.  
  1768. /**
  1769.  * Additional options for Graphical Displays
  1770.  *
  1771.  * Use the optimizations here to improve printing performance,
  1772.  * which can be adversely affected by graphical display drawing,
  1773.  * especially when doing several short moves, and when printing
  1774.  * on DELTA and SCARA machines.
  1775.  *
  1776.  * Some of these options may result in the display lagging behind
  1777.  * controller events, as there is a trade-off between reliable
  1778.  * printing performance versus fast display updates.
  1779.  */
  1780. #if HAS_MARLINUI_U8GLIB
  1781.   // Save many cycles by drawing a hollow frame or no frame on the Info Screen
  1782.   //#define XYZ_NO_FRAME
  1783.   #define XYZ_HOLLOW_FRAME
  1784.  
  1785.   // A bigger font is available for edit items. Costs 3120 bytes of flash.
  1786.   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1787.   //#define USE_BIG_EDIT_FONT
  1788.  
  1789.   // A smaller font may be used on the Info Screen. Costs 2434 bytes of flash.
  1790.   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1791.   //#define USE_SMALL_INFOFONT
  1792.  
  1793.   /**
  1794.    * Graphical Display Sleep
  1795.    *
  1796.    * The U8G library provides sleep / wake functions for SH1106, SSD1306,
  1797.    * SSD1309, and some other DOGM displays.
  1798.    * Enable this option to save energy and prevent OLED pixel burn-in.
  1799.    * Adds the menu item Configuration > LCD Timeout (m) to set a wait period
  1800.    * from 0 (disabled) to 99 minutes.
  1801.    */
  1802.   //#define DISPLAY_SLEEP_MINUTES 2  // (minutes) Timeout before turning off the screen. Set with M255 S.
  1803.  
  1804.   /**
  1805.    * ST7920-based LCDs can emulate a 16 x 4 character display using
  1806.    * the ST7920 character-generator for very fast screen updates.
  1807.    * Enable LIGHTWEIGHT_UI to use this special display mode.
  1808.    *
  1809.    * Since LIGHTWEIGHT_UI has limited space, the position and status
  1810.    * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
  1811.    * length of time to display the status message before clearing.
  1812.    *
  1813.    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
  1814.    * This will prevent position updates from being displayed.
  1815.    */
  1816.   #if IS_U8GLIB_ST7920
  1817.     // Enable this option and reduce the value to optimize screen updates.
  1818.     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
  1819.     //#define DOGM_SPI_DELAY_US 5
  1820.  
  1821.     //#define LIGHTWEIGHT_UI
  1822.     #if ENABLED(LIGHTWEIGHT_UI)
  1823.       #define STATUS_EXPIRE_SECONDS 20
  1824.     #endif
  1825.   #endif
  1826.  
  1827.   /**
  1828.    * Status (Info) Screen customization
  1829.    * These options may affect code size and screen render time.
  1830.    * Custom status screens can forcibly override these settings.
  1831.    */
  1832.   //#define STATUS_COMBINE_HEATERS    // Use combined heater images instead of separate ones
  1833.   //#define STATUS_HOTEND_NUMBERLESS  // Use plain hotend icons instead of numbered ones (with 2+ hotends)
  1834.   #define STATUS_HOTEND_INVERTED      // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM for numbered hotends)
  1835.   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
  1836.   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
  1837.   #define STATUS_CHAMBER_ANIM         // Use a second bitmap to indicate chamber heating
  1838.   //#define STATUS_CUTTER_ANIM        // Use a second bitmap to indicate spindle / laser active
  1839.   //#define STATUS_COOLER_ANIM        // Use a second bitmap to indicate laser cooling
  1840.   //#define STATUS_FLOWMETER_ANIM     // Use multiple bitmaps to indicate coolant flow
  1841.   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
  1842.   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
  1843.   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
  1844.   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
  1845.   //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
  1846.  
  1847.   // Frivolous Game Options
  1848.   //#define MARLIN_BRICKOUT
  1849.   //#define MARLIN_INVADERS
  1850.   //#define MARLIN_SNAKE
  1851.   //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
  1852.  
  1853. #endif // HAS_MARLINUI_U8GLIB
  1854.  
  1855. #if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
  1856.   #define MENU_HOLLOW_FRAME           // Enable to save many cycles by drawing a hollow frame on Menu Screens
  1857.   //#define OVERLAY_GFX_REVERSE       // Swap the CW/CCW indicators in the graphics overlay
  1858. #endif
  1859.  
  1860. //
  1861. // Additional options for DGUS / DWIN displays
  1862. //
  1863. #if HAS_DGUS_LCD
  1864.   #define LCD_BAUDRATE 115200
  1865.  
  1866.   #define DGUS_RX_BUFFER_SIZE 128
  1867.   #define DGUS_TX_BUFFER_SIZE 48
  1868.   //#define SERIAL_STATS_RX_BUFFER_OVERRUNS  // Fix Rx overrun situation (Currently only for AVR)
  1869.  
  1870.   #define DGUS_UPDATE_INTERVAL_MS  500    // (ms) Interval between automatic screen updates
  1871.  
  1872.   #if ANY(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS, DGUS_LCD_UI_HIPRECY)
  1873.     #define DGUS_PRINT_FILENAME           // Display the filename during printing
  1874.     #define DGUS_PREHEAT_UI               // Display a preheat screen during heatup
  1875.  
  1876.     #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS)
  1877.       //#define DGUS_UI_MOVE_DIS_OPTION   // Disabled by default for FYSETC and MKS
  1878.     #else
  1879.       #define DGUS_UI_MOVE_DIS_OPTION     // Enabled by default for UI_HIPRECY
  1880.     #endif
  1881.  
  1882.     #define DGUS_FILAMENT_LOADUNLOAD
  1883.     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
  1884.       #define DGUS_FILAMENT_PURGE_LENGTH 10
  1885.       #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
  1886.     #endif
  1887.  
  1888.     #define DGUS_UI_WAITING               // Show a "waiting" screen between some screens
  1889.     #if ENABLED(DGUS_UI_WAITING)
  1890.       #define DGUS_UI_WAITING_STATUS 10
  1891.       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
  1892.     #endif
  1893.   #endif
  1894. #endif // HAS_DGUS_LCD
  1895.  
  1896. //
  1897. // Additional options for AnyCubic Chiron TFT displays
  1898. //
  1899. #if ENABLED(ANYCUBIC_LCD_CHIRON)
  1900.   // By default the type of panel is automatically detected.
  1901.   // Enable one of these options if you know the panel type.
  1902.   //#define CHIRON_TFT_STANDARD
  1903.   //#define CHIRON_TFT_NEW
  1904.  
  1905.   // Enable the longer Anycubic powerup startup tune
  1906.   //#define AC_DEFAULT_STARTUP_TUNE
  1907.  
  1908.   /**
  1909.    * Display Folders
  1910.    * By default the file browser lists all G-code files (including those in subfolders) in a flat list.
  1911.    * Enable this option to display a hierarchical file browser.
  1912.    *
  1913.    * NOTES:
  1914.    * - Without this option it helps to enable SDCARD_SORT_ALPHA so files are sorted before/after folders.
  1915.    * - When used with the "new" panel, folder names will also have '.gcode' appended to their names.
  1916.    *   This hack is currently required to force the panel to show folders.
  1917.    */
  1918.   #define AC_SD_FOLDER_VIEW
  1919. #endif
  1920.  
  1921. //
  1922. // Specify additional languages for the UI. Default specified by LCD_LANGUAGE.
  1923. //
  1924. #if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE, IS_DWIN_MARLINUI)
  1925.   //#define LCD_LANGUAGE_2 fr
  1926.   //#define LCD_LANGUAGE_3 de
  1927.   //#define LCD_LANGUAGE_4 es
  1928.   //#define LCD_LANGUAGE_5 it
  1929.   #ifdef LCD_LANGUAGE_2
  1930.     //#define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change
  1931.   #endif
  1932. #endif
  1933.  
  1934. //
  1935. // Touch UI for the FTDI Embedded Video Engine (EVE)
  1936. //
  1937. #if ENABLED(TOUCH_UI_FTDI_EVE)
  1938.   // Display board used
  1939.   //#define LCD_FTDI_VM800B35A        // FTDI 3.5" with FT800 (320x240)
  1940.   //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
  1941.   //#define LCD_HAOYU_FT800CB         // Haoyu with 4.3" or 5" (480x272)
  1942.   //#define LCD_HAOYU_FT810CB         // Haoyu with 5" (800x480)
  1943.   //#define LCD_LULZBOT_CLCD_UI       // LulzBot Color LCD UI
  1944.   //#define LCD_FYSETC_TFT81050       // FYSETC with 5" (800x480)
  1945.   //#define LCD_EVE3_50G              // Matrix Orbital 5.0", 800x480, BT815
  1946.   //#define LCD_EVE2_50G              // Matrix Orbital 5.0", 800x480, FT813
  1947.  
  1948.   // Correct the resolution if not using the stock TFT panel.
  1949.   //#define TOUCH_UI_320x240
  1950.   //#define TOUCH_UI_480x272
  1951.   //#define TOUCH_UI_800x480
  1952.  
  1953.   // Mappings for boards with a standard RepRapDiscount Display connector
  1954.   //#define AO_EXP1_PINMAP      // LulzBot CLCD UI EXP1 mapping
  1955.   //#define AO_EXP2_PINMAP      // LulzBot CLCD UI EXP2 mapping
  1956.   //#define CR10_TFT_PINMAP     // Rudolph Riedel's CR10 pin mapping
  1957.   //#define S6_TFT_PINMAP       // FYSETC S6 pin mapping
  1958.   //#define F6_TFT_PINMAP       // FYSETC F6 pin mapping
  1959.  
  1960.   //#define OTHER_PIN_LAYOUT  // Define pins manually below
  1961.   #if ENABLED(OTHER_PIN_LAYOUT)
  1962.     // Pins for CS and MOD_RESET (PD) must be chosen
  1963.     #define CLCD_MOD_RESET  9
  1964.     #define CLCD_SPI_CS    10
  1965.  
  1966.     // If using software SPI, specify pins for SCLK, MOSI, MISO
  1967.     //#define CLCD_USE_SOFT_SPI
  1968.     #if ENABLED(CLCD_USE_SOFT_SPI)
  1969.       #define CLCD_SOFT_SPI_MOSI 11
  1970.       #define CLCD_SOFT_SPI_MISO 12
  1971.       #define CLCD_SOFT_SPI_SCLK 13
  1972.     #endif
  1973.   #endif
  1974.  
  1975.   // Display Orientation. An inverted (i.e. upside-down) display
  1976.   // is supported on the FT800. The FT810 and beyond also support
  1977.   // portrait and mirrored orientations.
  1978.   //#define TOUCH_UI_INVERTED
  1979.   //#define TOUCH_UI_PORTRAIT
  1980.   //#define TOUCH_UI_MIRRORED
  1981.  
  1982.   // UTF8 processing and rendering.
  1983.   // Unsupported characters are shown as '?'.
  1984.   //#define TOUCH_UI_USE_UTF8
  1985.   #if ENABLED(TOUCH_UI_USE_UTF8)
  1986.     // Western accents support. These accented characters use
  1987.     // combined bitmaps and require relatively little storage.
  1988.     #define TOUCH_UI_UTF8_WESTERN_CHARSET
  1989.     #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
  1990.       // Additional character groups. These characters require
  1991.       // full bitmaps and take up considerable storage:
  1992.       //#define TOUCH_UI_UTF8_SUPERSCRIPTS  // ¹ ² ³
  1993.       //#define TOUCH_UI_UTF8_COPYRIGHT     // © ®
  1994.       //#define TOUCH_UI_UTF8_GERMANIC      // ß
  1995.       //#define TOUCH_UI_UTF8_SCANDINAVIAN  // Æ Ð Ø Þ æ ð ø þ
  1996.       //#define TOUCH_UI_UTF8_PUNCTUATION   // « » ¿ ¡
  1997.       //#define TOUCH_UI_UTF8_CURRENCY      // ¢ £ ¤ ¥
  1998.       //#define TOUCH_UI_UTF8_ORDINALS      // º ª
  1999.       //#define TOUCH_UI_UTF8_MATHEMATICS   // ± × ÷
  2000.       //#define TOUCH_UI_UTF8_FRACTIONS     // ¼ ½ ¾
  2001.       //#define TOUCH_UI_UTF8_SYMBOLS       // µ ¶ ¦ § ¬
  2002.     #endif
  2003.  
  2004.     // Cyrillic character set, costs about 27KiB of flash
  2005.     //#define TOUCH_UI_UTF8_CYRILLIC_CHARSET
  2006.   #endif
  2007.  
  2008.   // Use a smaller font when labels don't fit buttons
  2009.   #define TOUCH_UI_FIT_TEXT
  2010.  
  2011.   // Use a numeric passcode for "Screen lock" keypad.
  2012.   // (recommended for smaller displays)
  2013.   //#define TOUCH_UI_PASSCODE
  2014.  
  2015.   // Output extra debug info for Touch UI events
  2016.   //#define TOUCH_UI_DEBUG
  2017.  
  2018.   // Developer menu (accessed by touching "About Printer" copyright text)
  2019.   //#define TOUCH_UI_DEVELOPER_MENU
  2020. #endif
  2021.  
  2022. //
  2023. // Classic UI Options
  2024. //
  2025. #if TFT_SCALED_DOGLCD
  2026.   //#define TFT_MARLINUI_COLOR 0xFFFF // White
  2027.   //#define TFT_MARLINBG_COLOR 0x0000 // Black
  2028.   //#define TFT_DISABLED_COLOR 0x0003 // Almost black
  2029.   //#define TFT_BTCANCEL_COLOR 0xF800 // Red
  2030.   //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
  2031.   //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
  2032. #endif
  2033.  
  2034. //
  2035. // ADC Button Debounce
  2036. //
  2037. #if HAS_ADC_BUTTONS
  2038.   #define ADC_BUTTON_DEBOUNCE_DELAY 16  // Increase if buttons bounce or repeat too fast
  2039. #endif
  2040.  
  2041. // @section safety
  2042.  
  2043. /**
  2044.  * The watchdog hardware timer will do a reset and disable all outputs
  2045.  * if the firmware gets too overloaded to read the temperature sensors.
  2046.  *
  2047.  * If you find that watchdog reboot causes your AVR board to hang forever,
  2048.  * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
  2049.  * NOTE: This method is less reliable as it can only catch hangups while
  2050.  * interrupts are enabled.
  2051.  */
  2052. #define USE_WATCHDOG
  2053. #if ENABLED(USE_WATCHDOG)
  2054.   //#define WATCHDOG_RESET_MANUAL
  2055. #endif
  2056.  
  2057. // @section lcd
  2058.  
  2059. /**
  2060.  * Babystepping enables movement of the axes by tiny increments without changing
  2061.  * the current position values. This feature is used primarily to adjust the Z
  2062.  * axis in the first layer of a print in real-time.
  2063.  *
  2064.  * Warning: Does not respect endstops!
  2065.  */
  2066. #define BABYSTEPPING
  2067. #if ENABLED(BABYSTEPPING)
  2068.   #define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
  2069.   #define BABYSTEP_WITHOUT_HOMING
  2070.   #define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
  2071.   #define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  2072.   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
  2073.   #define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
  2074.   #define BABYSTEP_MULTIPLICATOR_Z  0.01       // (steps or mm) Steps or millimeter distance for each Z babystep
  2075.   #define BABYSTEP_MULTIPLICATOR_XY 0.01       // (steps or mm) Steps or millimeter distance for each XY babystep
  2076.  
  2077.   //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
  2078.   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
  2079.     #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
  2080.                                             // Note: Extra time may be added to mitigate controller latency.
  2081.     //#define MOVE_Z_WHEN_IDLE              // Jump to the move Z menu on double-click when printer is idle.
  2082.     #if ENABLED(MOVE_Z_WHEN_IDLE)
  2083.       #define MOVE_Z_IDLE_MULTIPLICATOR 1   // Multiply 1mm by this factor for the move step size.
  2084.     #endif
  2085.   #endif
  2086.  
  2087.   #define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
  2088.  
  2089.   //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
  2090.   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
  2091.     //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
  2092.     //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
  2093.   #endif
  2094. #endif
  2095.  
  2096. // @section extruder
  2097.  
  2098. /**
  2099.  * Linear Pressure Control v1.5
  2100.  *
  2101.  * Assumption: advance [steps] = k * (delta velocity [steps/s])
  2102.  * K=0 means advance disabled.
  2103.  *
  2104.  * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
  2105.  *
  2106.  * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
  2107.  * Larger K values will be needed for flexible filament and greater distances.
  2108.  * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
  2109.  * print acceleration will be reduced during the affected moves to keep within the limit.
  2110.  *
  2111.  * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
  2112.  */
  2113. //#define LIN_ADVANCE
  2114. #if ENABLED(LIN_ADVANCE)
  2115.   #if ENABLED(DISTINCT_E_FACTORS)
  2116.     #define ADVANCE_K { 0.22 }    // (mm) Compression length per 1mm/s extruder speed, per extruder
  2117.   #else
  2118.     #define ADVANCE_K 0.22        // (mm) Compression length applying to all extruders
  2119.   #endif
  2120.   //#define ADVANCE_K_EXTRA       // Add a second linear advance constant, configurable with M900 L.
  2121.   //#define LA_DEBUG              // Print debug information to serial during operation. Disable for production use.
  2122.   //#define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
  2123.   //#define EXPERIMENTAL_I2S_LA   // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
  2124. #endif
  2125.  
  2126. // @section leveling
  2127.  
  2128. /**
  2129.  * Use Safe Bed Leveling coordinates to move axes to a useful position before bed probing.
  2130.  * For example, after homing a rotational axis the Z probe might not be perpendicular to the bed.
  2131.  * Choose values the orient the bed horizontally and the Z-probe vertically.
  2132.  */
  2133. //#define SAFE_BED_LEVELING_START_X 0.0
  2134. //#define SAFE_BED_LEVELING_START_Y 0.0
  2135. //#define SAFE_BED_LEVELING_START_Z 0.0
  2136. //#define SAFE_BED_LEVELING_START_I 0.0
  2137. //#define SAFE_BED_LEVELING_START_J 0.0
  2138. //#define SAFE_BED_LEVELING_START_K 0.0
  2139. //#define SAFE_BED_LEVELING_START_U 0.0
  2140. //#define SAFE_BED_LEVELING_START_V 0.0
  2141. //#define SAFE_BED_LEVELING_START_W 0.0
  2142.  
  2143. /**
  2144.  * Points to probe for all 3-point Leveling procedures.
  2145.  * Override if the automatically selected points are inadequate.
  2146.  */
  2147. #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  2148.   //#define PROBE_PT_1_X 15
  2149.   //#define PROBE_PT_1_Y 180
  2150.   //#define PROBE_PT_2_X 15
  2151.   //#define PROBE_PT_2_Y 20
  2152.   //#define PROBE_PT_3_X 170
  2153.   //#define PROBE_PT_3_Y 20
  2154. #endif
  2155.  
  2156. /**
  2157.  * Probing Margins
  2158.  *
  2159.  * Override PROBING_MARGIN for each side of the build plate
  2160.  * Useful to get probe points to exact positions on targets or
  2161.  * to allow leveling to avoid plate clamps on only specific
  2162.  * sides of the bed. With NOZZLE_AS_PROBE negative values are
  2163.  * allowed, to permit probing outside the bed.
  2164.  *
  2165.  * If you are replacing the prior *_PROBE_BED_POSITION options,
  2166.  * LEFT and FRONT values in most cases will map directly over
  2167.  * RIGHT and REAR would be the inverse such as
  2168.  * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
  2169.  *
  2170.  * This will allow all positions to match at compilation, however
  2171.  * should the probe position be modified with M851XY then the
  2172.  * probe points will follow. This prevents any change from causing
  2173.  * the probe to be unable to reach any points.
  2174.  */
  2175. #if PROBE_SELECTED && !IS_KINEMATIC
  2176.   //#define PROBING_MARGIN_LEFT PROBING_MARGIN
  2177.   //#define PROBING_MARGIN_RIGHT PROBING_MARGIN
  2178.   //#define PROBING_MARGIN_FRONT PROBING_MARGIN
  2179.   //#define PROBING_MARGIN_BACK PROBING_MARGIN
  2180. #endif
  2181.  
  2182. #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  2183.   // Override the mesh area if the automatic (max) area is too large
  2184.   //#define MESH_MIN_X MESH_INSET
  2185.   //#define MESH_MIN_Y MESH_INSET
  2186.   //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
  2187.   //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
  2188. #endif
  2189.  
  2190. #if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS)
  2191.   //#define OPTIMIZED_MESH_STORAGE  // Store mesh with less precision to save EEPROM space
  2192. #endif
  2193.  
  2194. /**
  2195.  * Repeatedly attempt G29 leveling until it succeeds.
  2196.  * Stop after G29_MAX_RETRIES attempts.
  2197.  */
  2198. //#define G29_RETRY_AND_RECOVER
  2199. #if ENABLED(G29_RETRY_AND_RECOVER)
  2200.   #define G29_MAX_RETRIES 3
  2201.   #define G29_HALT_ON_FAILURE
  2202.   /**
  2203.    * Specify the GCODE commands that will be executed when leveling succeeds,
  2204.    * between attempts, and after the maximum number of retries have been tried.
  2205.    */
  2206.   #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
  2207.   #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
  2208.   #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
  2209.  
  2210. #endif
  2211.  
  2212. // @section probes
  2213.  
  2214. /**
  2215.  * Thermal Probe Compensation
  2216.  *
  2217.  * Adjust probe measurements to compensate for distortion associated with the temperature
  2218.  * of the probe, bed, and/or hotend.
  2219.  * Use G76 to automatically calibrate this feature for probe and bed temperatures.
  2220.  * (Extruder temperature/offset values must be calibrated manually.)
  2221.  * Use M871 to set temperature/offset values manually.
  2222.  * For more details see https://marlinfw.org/docs/features/probe_temp_compensation.html
  2223.  */
  2224. //#define PTC_PROBE    // Compensate based on probe temperature
  2225. //#define PTC_BED      // Compensate based on bed temperature
  2226. //#define PTC_HOTEND   // Compensate based on hotend temperature
  2227.  
  2228. #if ANY(PTC_PROBE, PTC_BED, PTC_HOTEND)
  2229.   /**
  2230.    * If the probe is outside the defined range, use linear extrapolation with the closest
  2231.    * point and the point with index PTC_LINEAR_EXTRAPOLATION. e.g., If set to 4 it will use the
  2232.    * linear extrapolation between data[0] and data[4] for values below PTC_PROBE_START.
  2233.    */
  2234.   //#define PTC_LINEAR_EXTRAPOLATION 4
  2235.  
  2236.   #if ENABLED(PTC_PROBE)
  2237.     // Probe temperature calibration generates a table of values starting at PTC_PROBE_START
  2238.     // (e.g., 30), in steps of PTC_PROBE_RES (e.g., 5) with PTC_PROBE_COUNT (e.g., 10) samples.
  2239.     #define PTC_PROBE_START   30    // (°C)
  2240.     #define PTC_PROBE_RES      5    // (°C)
  2241.     #define PTC_PROBE_COUNT   10
  2242.     #define PTC_PROBE_ZOFFS   { 0 } // (µm) Z adjustments per sample
  2243.   #endif
  2244.  
  2245.   #if ENABLED(PTC_BED)
  2246.     // Bed temperature calibration builds a similar table.
  2247.     #define PTC_BED_START     60    // (°C)
  2248.     #define PTC_BED_RES        5    // (°C)
  2249.     #define PTC_BED_COUNT     10
  2250.     #define PTC_BED_ZOFFS     { 0 } // (µm) Z adjustments per sample
  2251.   #endif
  2252.  
  2253.   #if ENABLED(PTC_HOTEND)
  2254.     // Note: There is no automatic calibration for the hotend. Use M871.
  2255.     #define PTC_HOTEND_START 180    // (°C)
  2256.     #define PTC_HOTEND_RES     5    // (°C)
  2257.     #define PTC_HOTEND_COUNT  20
  2258.     #define PTC_HOTEND_ZOFFS  { 0 } // (µm) Z adjustments per sample
  2259.   #endif
  2260.  
  2261.   // G76 options
  2262.   #if BOTH(PTC_PROBE, PTC_BED)
  2263.     // Park position to wait for probe cooldown
  2264.     #define PTC_PARK_POS   { 0, 0, 100 }
  2265.  
  2266.     // Probe position to probe and wait for probe to reach target temperature
  2267.     //#define PTC_PROBE_POS  { 12.0f, 7.3f } // Example: MK52 magnetic heatbed
  2268.     #define PTC_PROBE_POS  { 90, 100 }
  2269.  
  2270.     // The temperature the probe should be at while taking measurements during
  2271.     // bed temperature calibration.
  2272.     #define PTC_PROBE_TEMP    30  // (°C)
  2273.  
  2274.     // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster.
  2275.     // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z).
  2276.     #define PTC_PROBE_HEATING_OFFSET 0.5  // (mm)
  2277.   #endif
  2278. #endif // PTC_PROBE || PTC_BED || PTC_HOTEND
  2279.  
  2280. // @section extras
  2281.  
  2282. //
  2283. // G60/G61 Position Save and Return
  2284. //
  2285. //#define SAVED_POSITIONS 1         // Each saved position slot costs 12 bytes
  2286.  
  2287. //
  2288. // G2/G3 Arc Support
  2289. //
  2290. #define ARC_SUPPORT                   // Requires ~3226 bytes
  2291. #if ENABLED(ARC_SUPPORT)
  2292.   #define MIN_ARC_SEGMENT_MM      0.1 // (mm) Minimum length of each arc segment
  2293.   #define MAX_ARC_SEGMENT_MM      1.0 // (mm) Maximum length of each arc segment
  2294.   #define MIN_CIRCLE_SEGMENTS    72   // Minimum number of segments in a complete circle
  2295.   //#define ARC_SEGMENTS_PER_SEC 50   // Use the feedrate to choose the segment length
  2296.   #define N_ARC_CORRECTION       25   // Number of interpolated segments between corrections
  2297.   //#define ARC_P_CIRCLES             // Enable the 'P' parameter to specify complete circles
  2298.   //#define SF_ARC_FIX                // Enable only if using SkeinForge with "Arc Point" fillet procedure
  2299. #endif
  2300.  
  2301. // G5 Bézier Curve Support with XYZE destination and IJPQ offsets
  2302. //#define BEZIER_CURVE_SUPPORT        // Requires ~2666 bytes
  2303.  
  2304. #if EITHER(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
  2305.   //#define CNC_WORKSPACE_PLANES      // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
  2306. #endif
  2307.  
  2308. /**
  2309.  * Direct Stepping
  2310.  *
  2311.  * Comparable to the method used by Klipper, G6 direct stepping significantly
  2312.  * reduces motion calculations, increases top printing speeds, and results in
  2313.  * less step aliasing by calculating all motions in advance.
  2314.  * Preparing your G-code: https://github.com/colinrgodsey/step-daemon
  2315.  */
  2316. //#define DIRECT_STEPPING
  2317.  
  2318. /**
  2319.  * G38 Probe Target
  2320.  *
  2321.  * This option adds G38.2 and G38.3 (probe towards target)
  2322.  * and optionally G38.4 and G38.5 (probe away from target).
  2323.  * Set MULTIPLE_PROBING for G38 to probe more than once.
  2324.  */
  2325. //#define G38_PROBE_TARGET
  2326. #if ENABLED(G38_PROBE_TARGET)
  2327.   //#define G38_PROBE_AWAY        // Include G38.4 and G38.5 to probe away from target
  2328.   #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
  2329. #endif
  2330.  
  2331. // @section motion
  2332.  
  2333. // Moves (or segments) with fewer steps than this will be joined with the next move
  2334. #define MIN_STEPS_PER_SEGMENT 6
  2335.  
  2336. /**
  2337.  * Minimum delay before and after setting the stepper DIR (in ns)
  2338.  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  2339.  *    20 : Minimum for TMC2xxx drivers
  2340.  *   200 : Minimum for A4988 drivers
  2341.  *   400 : Minimum for A5984 drivers
  2342.  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  2343.  *   650 : Minimum for DRV8825 drivers
  2344.  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
  2345.  * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
  2346.  *
  2347.  * Override the default value based on the driver type set in Configuration.h.
  2348.  */
  2349. //#define MINIMUM_STEPPER_POST_DIR_DELAY 650
  2350. //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
  2351.  
  2352. /**
  2353.  * Minimum stepper driver pulse width (in µs)
  2354.  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
  2355.  *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
  2356.  *   1 : Minimum for A4988 and A5984 stepper drivers
  2357.  *   2 : Minimum for DRV8825 stepper drivers
  2358.  *   3 : Minimum for TB6600 stepper drivers
  2359.  *  30 : Minimum for TB6560 stepper drivers
  2360.  *
  2361.  * Override the default value based on the driver type set in Configuration.h.
  2362.  */
  2363. //#define MINIMUM_STEPPER_PULSE 2
  2364.  
  2365. /**
  2366.  * Maximum stepping rate (in Hz) the stepper driver allows
  2367.  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
  2368.  *  5000000 : Maximum for TMC2xxx stepper drivers
  2369.  *  1000000 : Maximum for LV8729 stepper driver
  2370.  *  500000  : Maximum for A4988 stepper driver
  2371.  *  250000  : Maximum for DRV8825 stepper driver
  2372.  *  150000  : Maximum for TB6600 stepper driver
  2373.  *   15000  : Maximum for TB6560 stepper driver
  2374.  *
  2375.  * Override the default value based on the driver type set in Configuration.h.
  2376.  */
  2377. //#define MAXIMUM_STEPPER_RATE 250000
  2378.  
  2379. // @section temperature
  2380.  
  2381. // Control heater 0 and heater 1 in parallel.
  2382. //#define HEATERS_PARALLEL
  2383.  
  2384. //===========================================================================
  2385. //================================= Buffers =================================
  2386. //===========================================================================
  2387.  
  2388. // @section gcode
  2389.  
  2390. // The number of linear moves that can be in the planner at once.
  2391. // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g., 8, 16, 32)
  2392. #if BOTH(SDSUPPORT, DIRECT_STEPPING)
  2393.   #define BLOCK_BUFFER_SIZE  8
  2394. #elif ENABLED(SDSUPPORT)
  2395.   #define BLOCK_BUFFER_SIZE 16
  2396. #else
  2397.   #define BLOCK_BUFFER_SIZE 16
  2398. #endif
  2399.  
  2400. // @section serial
  2401.  
  2402. // The ASCII buffer for serial input
  2403. #define MAX_CMD_SIZE 96
  2404. #define BUFSIZE 4
  2405.  
  2406. // Transmission to Host Buffer Size
  2407. // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
  2408. // To buffer a simple "ok" you need 4 bytes.
  2409. // For ADVANCED_OK (M105) you need 32 bytes.
  2410. // For debug-echo: 128 bytes for the optimal speed.
  2411. // Other output doesn't need to be that speedy.
  2412. // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
  2413. #define TX_BUFFER_SIZE 0
  2414.  
  2415. // Host Receive Buffer Size
  2416. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
  2417. // To use flow control, set this buffer size to at least 1024 bytes.
  2418. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
  2419. //#define RX_BUFFER_SIZE 1024
  2420.  
  2421. #if RX_BUFFER_SIZE >= 1024
  2422.   // Enable to have the controller send XON/XOFF control characters to
  2423.   // the host to signal the RX buffer is becoming full.
  2424.   //#define SERIAL_XON_XOFF
  2425. #endif
  2426.  
  2427. #if ENABLED(SDSUPPORT)
  2428.   // Enable this option to collect and display the maximum
  2429.   // RX queue usage after transferring a file to SD.
  2430.   //#define SERIAL_STATS_MAX_RX_QUEUED
  2431.  
  2432.   // Enable this option to collect and display the number
  2433.   // of dropped bytes after a file transfer to SD.
  2434.   //#define SERIAL_STATS_DROPPED_RX
  2435. #endif
  2436.  
  2437. // Monitor RX buffer usage
  2438. // Dump an error to the serial port if the serial receive buffer overflows.
  2439. // If you see these errors, increase the RX_BUFFER_SIZE value.
  2440. // Not supported on all platforms.
  2441. //#define RX_BUFFER_MONITOR
  2442.  
  2443. /**
  2444.  * Emergency Command Parser
  2445.  *
  2446.  * Add a low-level parser to intercept certain commands as they
  2447.  * enter the serial receive buffer, so they cannot be blocked.
  2448.  * Currently handles M108, M112, M410, M876
  2449.  * NOTE: Not yet implemented for all platforms.
  2450.  */
  2451. //#define EMERGENCY_PARSER
  2452.  
  2453. /**
  2454.  * Realtime Reporting (requires EMERGENCY_PARSER)
  2455.  *
  2456.  * - Report position and state of the machine (like Grbl).
  2457.  * - Auto-report position during long moves.
  2458.  * - Useful for CNC/LASER.
  2459.  *
  2460.  * Adds support for commands:
  2461.  *  S000 : Report State and Position while moving.
  2462.  *  P000 : Instant Pause / Hold while moving.
  2463.  *  R000 : Resume from Pause / Hold.
  2464.  *
  2465.  * - During Hold all Emergency Parser commands are available, as usual.
  2466.  * - Enable NANODLP_Z_SYNC and NANODLP_ALL_AXIS for move command end-state reports.
  2467.  */
  2468. //#define REALTIME_REPORTING_COMMANDS
  2469. #if ENABLED(REALTIME_REPORTING_COMMANDS)
  2470.   //#define FULL_REPORT_TO_HOST_FEATURE   // Auto-report the machine status like Grbl CNC
  2471. #endif
  2472.  
  2473. /**
  2474.  * Bad Serial-connections can miss a received command by sending an 'ok'
  2475.  * Therefore some clients abort after 30 seconds in a timeout.
  2476.  * Some other clients start sending commands while receiving a 'wait'.
  2477.  * This "wait" is only sent when the buffer is empty. 1 second is a good value here.
  2478.  */
  2479. //#define NO_TIMEOUTS 1000 // (ms)
  2480.  
  2481. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
  2482. //#define ADVANCED_OK
  2483.  
  2484. // Printrun may have trouble receiving long strings all at once.
  2485. // This option inserts short delays between lines of serial output.
  2486. #define SERIAL_OVERRUN_PROTECTION
  2487.  
  2488. // For serial echo, the number of digits after the decimal point
  2489. //#define SERIAL_FLOAT_PRECISION 4
  2490.  
  2491. /**
  2492.  * Set the number of proportional font spaces required to fill up a typical character space.
  2493.  * This can help to better align the output of commands like `G29 O` Mesh Output.
  2494.  *
  2495.  * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
  2496.  * Otherwise, adjust according to your client and font.
  2497.  */
  2498. #define PROPORTIONAL_FONT_RATIO 1.0
  2499.  
  2500. // @section extras
  2501.  
  2502. /**
  2503.  * Extra Fan Speed
  2504.  * Adds a secondary fan speed for each print-cooling fan.
  2505.  *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
  2506.  *   'M106 P<fan> T2'     : Use the set secondary speed
  2507.  *   'M106 P<fan> T1'     : Restore the previous fan speed
  2508.  */
  2509. //#define EXTRA_FAN_SPEED
  2510.  
  2511. // @section gcode
  2512.  
  2513. /**
  2514.  * Firmware-based and LCD-controlled retract
  2515.  *
  2516.  * Add G10 / G11 commands for automatic firmware-based retract / recover.
  2517.  * Use M207 and M208 to define parameters for retract / recover.
  2518.  *
  2519.  * Use M209 to enable or disable auto-retract.
  2520.  * With auto-retract enabled, all G1 E moves within the set range
  2521.  * will be converted to firmware-based retract/recover moves.
  2522.  *
  2523.  * Be sure to turn off auto-retract during filament change.
  2524.  *
  2525.  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  2526.  */
  2527. //#define FWRETRACT
  2528. #if ENABLED(FWRETRACT)
  2529.   #define FWRETRACT_AUTORETRACT             // Override slicer retractions
  2530.   #if ENABLED(FWRETRACT_AUTORETRACT)
  2531.     #define MIN_AUTORETRACT             0.1 // (mm) Don't convert E moves under this length
  2532.     #define MAX_AUTORETRACT            10.0 // (mm) Don't convert E moves over this length
  2533.   #endif
  2534.   #define RETRACT_LENGTH                3   // (mm) Default retract length (positive value)
  2535.   #define RETRACT_LENGTH_SWAP          13   // (mm) Default swap retract length (positive value)
  2536.   #define RETRACT_FEEDRATE             45   // (mm/s) Default feedrate for retracting
  2537.   #define RETRACT_ZRAISE                0   // (mm) Default retract Z-raise
  2538.   #define RETRACT_RECOVER_LENGTH        0   // (mm) Default additional recover length (added to retract length on recover)
  2539.   #define RETRACT_RECOVER_LENGTH_SWAP   0   // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
  2540.   #define RETRACT_RECOVER_FEEDRATE      8   // (mm/s) Default feedrate for recovering from retraction
  2541.   #define RETRACT_RECOVER_FEEDRATE_SWAP 8   // (mm/s) Default feedrate for recovering from swap retraction
  2542.   #if ENABLED(MIXING_EXTRUDER)
  2543.     //#define RETRACT_SYNC_MIXING           // Retract and restore all mixing steppers simultaneously
  2544.   #endif
  2545. #endif
  2546.  
  2547. // @section tool change
  2548.  
  2549. /**
  2550.  * Universal tool change settings.
  2551.  * Applies to all types of extruders except where explicitly noted.
  2552.  */
  2553. #if HAS_MULTI_EXTRUDER
  2554.   // Z raise distance for tool-change, as needed for some extruders
  2555.   #define TOOLCHANGE_ZRAISE                 2 // (mm)
  2556.   //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT  // Apply raise before swap retraction (if enabled)
  2557.   //#define TOOLCHANGE_NO_RETURN              // Never return to previous position on tool-change
  2558.   #if ENABLED(TOOLCHANGE_NO_RETURN)
  2559.     //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X"   // Extra G-code to run after tool-change
  2560.   #endif
  2561.  
  2562.   /**
  2563.    * Extra G-code to run while executing tool-change commands. Can be used to use an additional
  2564.    * stepper motor (e.g., I axis in Configuration.h) to drive the tool-changer.
  2565.    */
  2566.   //#define EVENT_GCODE_TOOLCHANGE_T0 "G28 A\nG1 A0"  // Extra G-code to run while executing tool-change command T0
  2567.   //#define EVENT_GCODE_TOOLCHANGE_T1 "G1 A10"        // Extra G-code to run while executing tool-change command T1
  2568.   //#define EVENT_GCODE_TOOLCHANGE_ALWAYS_RUN         // Always execute above G-code sequences. Use with caution!
  2569.  
  2570.   /**
  2571.    * Tool Sensors detect when tools have been picked up or dropped.
  2572.    * Requires the pins TOOL_SENSOR1_PIN, TOOL_SENSOR2_PIN, etc.
  2573.    */
  2574.   //#define TOOL_SENSOR
  2575.  
  2576.   /**
  2577.    * Retract and prime filament on tool-change to reduce
  2578.    * ooze and stringing and to get cleaner transitions.
  2579.    */
  2580.   //#define TOOLCHANGE_FILAMENT_SWAP
  2581.   #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
  2582.     // Load / Unload
  2583.     #define TOOLCHANGE_FS_LENGTH              12  // (mm) Load / Unload length
  2584.     #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH  0  // (mm) Extra length for better restart. Adjust with LCD or M217 B.
  2585.     #define TOOLCHANGE_FS_RETRACT_SPEED   (50*60) // (mm/min) (Unloading)
  2586.     #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down)
  2587.  
  2588.     // Longer prime to clean out a SINGLENOZZLE
  2589.     #define TOOLCHANGE_FS_EXTRA_PRIME          0  // (mm) Extra priming length
  2590.     #define TOOLCHANGE_FS_PRIME_SPEED    (4.6*60) // (mm/min) Extra priming feedrate
  2591.     #define TOOLCHANGE_FS_WIPE_RETRACT         0  // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G.
  2592.  
  2593.     // Cool after prime to reduce stringing
  2594.     #define TOOLCHANGE_FS_FAN                 -1  // Fan index or -1 to skip
  2595.     #define TOOLCHANGE_FS_FAN_SPEED          255  // 0-255
  2596.     #define TOOLCHANGE_FS_FAN_TIME            10  // (seconds)
  2597.  
  2598.     // Use TOOLCHANGE_FS_PRIME_SPEED feedrate the first time each extruder is primed
  2599.     //#define TOOLCHANGE_FS_SLOW_FIRST_PRIME
  2600.  
  2601.     /**
  2602.      * Prime T0 the first time T0 is sent to the printer:
  2603.      *  [ Power-On -> T0 { Activate & Prime T0 } -> T1 { Retract T0, Activate & Prime T1 } ]
  2604.      * If disabled, no priming on T0 until switching back to T0 from another extruder:
  2605.      *  [ Power-On -> T0 { T0 Activated } -> T1 { Activate & Prime T1 } -> T0 { Retract T1, Activate & Prime T0 } ]
  2606.      * Enable with M217 V1 before printing to avoid unwanted priming on host connect.
  2607.      */
  2608.     //#define TOOLCHANGE_FS_PRIME_FIRST_USED
  2609.  
  2610.     /**
  2611.      * Tool Change Migration
  2612.      * This feature provides G-code and LCD options to switch tools mid-print.
  2613.      * All applicable tool properties are migrated so the print can continue.
  2614.      * Tools must be closely matching and other restrictions may apply.
  2615.      * Useful to:
  2616.      *   - Change filament color without interruption
  2617.      *   - Switch spools automatically on filament runout
  2618.      *   - Switch to a different nozzle on an extruder jam
  2619.      */
  2620.     #define TOOLCHANGE_MIGRATION_FEATURE
  2621.  
  2622.   #endif
  2623.  
  2624.   /**
  2625.    * Position to park head during tool change.
  2626.    * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
  2627.    */
  2628.   //#define TOOLCHANGE_PARK
  2629.   #if ENABLED(TOOLCHANGE_PARK)
  2630.     #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
  2631.     #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/min)
  2632.     //#define TOOLCHANGE_PARK_X_ONLY          // X axis only move
  2633.     //#define TOOLCHANGE_PARK_Y_ONLY          // Y axis only move
  2634.   #endif
  2635. #endif // HAS_MULTI_EXTRUDER
  2636.  
  2637. // @section advanced pause
  2638.  
  2639. /**
  2640.  * Advanced Pause for Filament Change
  2641.  *  - Adds the G-code M600 Filament Change to initiate a filament change.
  2642.  *  - This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  2643.  *
  2644.  * Requirements:
  2645.  *  - For Filament Change parking enable and configure NOZZLE_PARK_FEATURE.
  2646.  *  - For user interaction enable an LCD display, HOST_PROMPT_SUPPORT, or EMERGENCY_PARSER.
  2647.  *
  2648.  * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
  2649.  */
  2650. //#define ADVANCED_PAUSE_FEATURE
  2651. #if ENABLED(ADVANCED_PAUSE_FEATURE)
  2652.   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
  2653.   #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
  2654.                                                   // This short retract is done immediately, before parking the nozzle.
  2655.   #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
  2656.   #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
  2657.   #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
  2658.                                                   //   For Bowden, the full length of the tube and nozzle.
  2659.                                                   //   For direct drive, the full length of the nozzle.
  2660.                                                   //   Set to 0 for manual unloading.
  2661.   #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
  2662.   #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
  2663.                                                   // 0 to disable start loading and skip to fast load only
  2664.   #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
  2665.   #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
  2666.   #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
  2667.                                                   //   For Bowden, the full length of the tube and nozzle.
  2668.                                                   //   For direct drive, the full length of the nozzle.
  2669.   //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
  2670.   #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
  2671.   #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
  2672.                                                   //   Set to 0 for manual extrusion.
  2673.                                                   //   Filament can be extruded repeatedly from the Filament Change menu
  2674.                                                   //   until extrusion is consistent, and to purge old filament.
  2675.   #define ADVANCED_PAUSE_RESUME_PRIME          0  // (mm) Extra distance to prime nozzle after returning from park.
  2676.   //#define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
  2677.  
  2678.                                                   // Filament Unload does a Retract, Delay, and Purge first:
  2679.   #define FILAMENT_UNLOAD_PURGE_RETRACT       13  // (mm) Unload initial retract length.
  2680.   #define FILAMENT_UNLOAD_PURGE_DELAY       5000  // (ms) Delay for the filament to cool after retract.
  2681.   #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
  2682.   #define FILAMENT_UNLOAD_PURGE_FEEDRATE      25  // (mm/s) feedrate to purge before unload
  2683.  
  2684.   #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
  2685.   #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
  2686.   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
  2687.   //#define FILAMENT_CHANGE_RESUME_ON_INSERT      // Automatically continue / load filament when runout sensor is triggered again.
  2688.   //#define PAUSE_REHEAT_FAST_RESUME              // Reduce number of waits by not prompting again post-timeout before continuing.
  2689.  
  2690.   //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
  2691.   //#define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change
  2692.  
  2693.   //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
  2694.   //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  2695. #endif
  2696.  
  2697. // @section tmc_smart
  2698.  
  2699. /**
  2700.  * Trinamic Smart Drivers
  2701.  *
  2702.  * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode:
  2703.  *  - Connect your SPI pins to the Hardware SPI interface on the board.
  2704.  *    Some boards have simple jumper connections! See your board's documentation.
  2705.  *  - Define the required Stepper CS pins in your `pins_MYBOARD.h` file.
  2706.  *    (See the RAMPS pins, for example.)
  2707.  *  - You can also use Software SPI with GPIO pins instead of Hardware SPI.
  2708.  *
  2709.  * To use TMC220x stepper drivers with Serial UART:
  2710.  *  - Connect PDN_UART to the #_SERIAL_TX_PIN through a 1K resistor.
  2711.  *    For reading capabilities also connect PDN_UART to #_SERIAL_RX_PIN with no resistor.
  2712.  *    Some boards have simple jumper connections! See your board's documentation.
  2713.  *  - These drivers can also be used with Hardware Serial.
  2714.  *
  2715.  * The TMC26XStepper library is required for TMC26X stepper drivers.
  2716.  *   https://github.com/MarlinFirmware/TMC26XStepper
  2717.  *
  2718.  * The TMCStepper library is required for other TMC stepper drivers.
  2719.  *   https://github.com/teemuatlut/TMCStepper
  2720.  *
  2721.  * @section tmc/config
  2722.  */
  2723. #if HAS_TRINAMIC_CONFIG || HAS_TMC26X
  2724.  
  2725.   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
  2726.  
  2727.   /**
  2728.    * Interpolate microsteps to 256
  2729.    * Override for each driver with <driver>_INTERPOLATE settings below
  2730.    */
  2731.   #define INTERPOLATE      true
  2732.  
  2733.   #if AXIS_IS_TMC_CONFIG(X)
  2734.     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
  2735.     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
  2736.     #define X_MICROSTEPS     16        // 0..256
  2737.     #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
  2738.     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
  2739.     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
  2740.     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
  2741.   #endif
  2742.  
  2743.   #if AXIS_IS_TMC_CONFIG(X2)
  2744.     #define X2_CURRENT      X_CURRENT
  2745.     #define X2_CURRENT_HOME X_CURRENT_HOME
  2746.     #define X2_MICROSTEPS   X_MICROSTEPS
  2747.     #define X2_RSENSE       X_RSENSE
  2748.     #define X2_CHAIN_POS     -1
  2749.     //#define X2_INTERPOLATE true
  2750.     //#define X2_HOLD_MULTIPLIER 0.5
  2751.   #endif
  2752.  
  2753.   #if AXIS_IS_TMC_CONFIG(Y)
  2754.     #define Y_CURRENT       800
  2755.     #define Y_CURRENT_HOME  Y_CURRENT
  2756.     #define Y_MICROSTEPS     16
  2757.     #define Y_RSENSE          0.11
  2758.     #define Y_CHAIN_POS      -1
  2759.     //#define Y_INTERPOLATE  true
  2760.     //#define Y_HOLD_MULTIPLIER 0.5
  2761.   #endif
  2762.  
  2763.   #if AXIS_IS_TMC_CONFIG(Y2)
  2764.     #define Y2_CURRENT      Y_CURRENT
  2765.     #define Y2_CURRENT_HOME Y_CURRENT_HOME
  2766.     #define Y2_MICROSTEPS   Y_MICROSTEPS
  2767.     #define Y2_RSENSE       Y_RSENSE
  2768.     #define Y2_CHAIN_POS     -1
  2769.     //#define Y2_INTERPOLATE true
  2770.     //#define Y2_HOLD_MULTIPLIER 0.5
  2771.   #endif
  2772.  
  2773.   #if AXIS_IS_TMC_CONFIG(Z)
  2774.     #define Z_CURRENT       800
  2775.     #define Z_CURRENT_HOME  Z_CURRENT
  2776.     #define Z_MICROSTEPS     16
  2777.     #define Z_RSENSE          0.11
  2778.     #define Z_CHAIN_POS      -1
  2779.     //#define Z_INTERPOLATE  true
  2780.     //#define Z_HOLD_MULTIPLIER 0.5
  2781.   #endif
  2782.  
  2783.   #if AXIS_IS_TMC_CONFIG(Z2)
  2784.     #define Z2_CURRENT      Z_CURRENT
  2785.     #define Z2_CURRENT_HOME Z_CURRENT_HOME
  2786.     #define Z2_MICROSTEPS   Z_MICROSTEPS
  2787.     #define Z2_RSENSE       Z_RSENSE
  2788.     #define Z2_CHAIN_POS     -1
  2789.     //#define Z2_INTERPOLATE true
  2790.     //#define Z2_HOLD_MULTIPLIER 0.5
  2791.   #endif
  2792.  
  2793.   #if AXIS_IS_TMC_CONFIG(Z3)
  2794.     #define Z3_CURRENT      Z_CURRENT
  2795.     #define Z3_CURRENT_HOME Z_CURRENT_HOME
  2796.     #define Z3_MICROSTEPS   Z_MICROSTEPS
  2797.     #define Z3_RSENSE       Z_RSENSE
  2798.     #define Z3_CHAIN_POS     -1
  2799.     //#define Z3_INTERPOLATE true
  2800.     //#define Z3_HOLD_MULTIPLIER 0.5
  2801.   #endif
  2802.  
  2803.   #if AXIS_IS_TMC_CONFIG(Z4)
  2804.     #define Z4_CURRENT      Z_CURRENT
  2805.     #define Z4_CURRENT_HOME Z_CURRENT_HOME
  2806.     #define Z4_MICROSTEPS   Z_MICROSTEPS
  2807.     #define Z4_RSENSE       Z_RSENSE
  2808.     #define Z4_CHAIN_POS     -1
  2809.     //#define Z4_INTERPOLATE true
  2810.     //#define Z4_HOLD_MULTIPLIER 0.5
  2811.   #endif
  2812.  
  2813.   #if AXIS_IS_TMC_CONFIG(I)
  2814.     #define I_CURRENT      800
  2815.     #define I_CURRENT_HOME I_CURRENT
  2816.     #define I_MICROSTEPS    16
  2817.     #define I_RSENSE         0.11
  2818.     #define I_CHAIN_POS     -1
  2819.     //#define I_INTERPOLATE  true
  2820.     //#define I_HOLD_MULTIPLIER 0.5
  2821.   #endif
  2822.  
  2823.   #if AXIS_IS_TMC_CONFIG(J)
  2824.     #define J_CURRENT      800
  2825.     #define J_CURRENT_HOME J_CURRENT
  2826.     #define J_MICROSTEPS    16
  2827.     #define J_RSENSE         0.11
  2828.     #define J_CHAIN_POS     -1
  2829.     //#define J_INTERPOLATE  true
  2830.     //#define J_HOLD_MULTIPLIER 0.5
  2831.   #endif
  2832.  
  2833.   #if AXIS_IS_TMC_CONFIG(K)
  2834.     #define K_CURRENT      800
  2835.     #define K_CURRENT_HOME K_CURRENT
  2836.     #define K_MICROSTEPS    16
  2837.     #define K_RSENSE         0.11
  2838.     #define K_CHAIN_POS     -1
  2839.     //#define K_INTERPOLATE  true
  2840.     //#define K_HOLD_MULTIPLIER 0.5
  2841.   #endif
  2842.  
  2843.   #if AXIS_IS_TMC_CONFIG(U)
  2844.     #define U_CURRENT      800
  2845.     #define U_CURRENT_HOME U_CURRENT
  2846.     #define U_MICROSTEPS     8
  2847.     #define U_RSENSE         0.11
  2848.     #define U_CHAIN_POS     -1
  2849.     //#define U_INTERPOLATE  true
  2850.     //#define U_HOLD_MULTIPLIER 0.5
  2851.   #endif
  2852.  
  2853.   #if AXIS_IS_TMC_CONFIG(V)
  2854.     #define V_CURRENT      800
  2855.     #define V_CURRENT_HOME V_CURRENT
  2856.     #define V_MICROSTEPS     8
  2857.     #define V_RSENSE         0.11
  2858.     #define V_CHAIN_POS     -1
  2859.     //#define V_INTERPOLATE  true
  2860.     //#define V_HOLD_MULTIPLIER 0.5
  2861.   #endif
  2862.  
  2863.   #if AXIS_IS_TMC_CONFIG(W)
  2864.     #define W_CURRENT      800
  2865.     #define W_CURRENT_HOME W_CURRENT
  2866.     #define W_MICROSTEPS     8
  2867.     #define W_RSENSE         0.11
  2868.     #define W_CHAIN_POS     -1
  2869.     //#define W_INTERPOLATE  true
  2870.     //#define W_HOLD_MULTIPLIER 0.5
  2871.   #endif
  2872.  
  2873.   #if AXIS_IS_TMC_CONFIG(E0)
  2874.     #define E0_CURRENT      800
  2875.     #define E0_MICROSTEPS    16
  2876.     #define E0_RSENSE         0.11
  2877.     #define E0_CHAIN_POS     -1
  2878.     //#define E0_INTERPOLATE true
  2879.     //#define E0_HOLD_MULTIPLIER 0.5
  2880.   #endif
  2881.  
  2882.   #if AXIS_IS_TMC_CONFIG(E1)
  2883.     #define E1_CURRENT      E0_CURRENT
  2884.     #define E1_MICROSTEPS   E0_MICROSTEPS
  2885.     #define E1_RSENSE       E0_RSENSE
  2886.     #define E1_CHAIN_POS     -1
  2887.     //#define E1_INTERPOLATE true
  2888.     //#define E1_HOLD_MULTIPLIER 0.5
  2889.   #endif
  2890.  
  2891.   #if AXIS_IS_TMC_CONFIG(E2)
  2892.     #define E2_CURRENT      E0_CURRENT
  2893.     #define E2_MICROSTEPS   E0_MICROSTEPS
  2894.     #define E2_RSENSE       E0_RSENSE
  2895.     #define E2_CHAIN_POS     -1
  2896.     //#define E2_INTERPOLATE true
  2897.     //#define E2_HOLD_MULTIPLIER 0.5
  2898.   #endif
  2899.  
  2900.   #if AXIS_IS_TMC_CONFIG(E3)
  2901.     #define E3_CURRENT      E0_CURRENT
  2902.     #define E3_MICROSTEPS   E0_MICROSTEPS
  2903.     #define E3_RSENSE       E0_RSENSE
  2904.     #define E3_CHAIN_POS     -1
  2905.     //#define E3_INTERPOLATE true
  2906.     //#define E3_HOLD_MULTIPLIER 0.5
  2907.   #endif
  2908.  
  2909.   #if AXIS_IS_TMC_CONFIG(E4)
  2910.     #define E4_CURRENT      E0_CURRENT
  2911.     #define E4_MICROSTEPS   E0_MICROSTEPS
  2912.     #define E4_RSENSE       E0_RSENSE
  2913.     #define E4_CHAIN_POS     -1
  2914.     //#define E4_INTERPOLATE true
  2915.     //#define E4_HOLD_MULTIPLIER 0.5
  2916.   #endif
  2917.  
  2918.   #if AXIS_IS_TMC_CONFIG(E5)
  2919.     #define E5_CURRENT      E0_CURRENT
  2920.     #define E5_MICROSTEPS   E0_MICROSTEPS
  2921.     #define E5_RSENSE       E0_RSENSE
  2922.     #define E5_CHAIN_POS     -1
  2923.     //#define E5_INTERPOLATE true
  2924.     //#define E5_HOLD_MULTIPLIER 0.5
  2925.   #endif
  2926.  
  2927.   #if AXIS_IS_TMC_CONFIG(E6)
  2928.     #define E6_CURRENT      E0_CURRENT
  2929.     #define E6_MICROSTEPS   E0_MICROSTEPS
  2930.     #define E6_RSENSE       E0_RSENSE
  2931.     #define E6_CHAIN_POS     -1
  2932.     //#define E6_INTERPOLATE true
  2933.     //#define E6_HOLD_MULTIPLIER 0.5
  2934.   #endif
  2935.  
  2936.   #if AXIS_IS_TMC_CONFIG(E7)
  2937.     #define E7_CURRENT      E0_CURRENT
  2938.     #define E7_MICROSTEPS   E0_MICROSTEPS
  2939.     #define E7_RSENSE       E0_RSENSE
  2940.     #define E7_CHAIN_POS     -1
  2941.     //#define E7_INTERPOLATE true
  2942.     //#define E7_HOLD_MULTIPLIER 0.5
  2943.   #endif
  2944.  
  2945.   // @section tmc/spi
  2946.  
  2947.   /**
  2948.    * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
  2949.    * The default pins can be found in your board's pins file.
  2950.    */
  2951.   //#define X_CS_PIN      -1
  2952.   //#define Y_CS_PIN      -1
  2953.   //#define Z_CS_PIN      -1
  2954.   //#define X2_CS_PIN     -1
  2955.   //#define Y2_CS_PIN     -1
  2956.   //#define Z2_CS_PIN     -1
  2957.   //#define Z3_CS_PIN     -1
  2958.   //#define Z4_CS_PIN     -1
  2959.   //#define I_CS_PIN      -1
  2960.   //#define J_CS_PIN      -1
  2961.   //#define K_CS_PIN      -1
  2962.   //#define U_CS_PIN      -1
  2963.   //#define V_CS_PIN      -1
  2964.   //#define W_CS_PIN      -1
  2965.   //#define E0_CS_PIN     -1
  2966.   //#define E1_CS_PIN     -1
  2967.   //#define E2_CS_PIN     -1
  2968.   //#define E3_CS_PIN     -1
  2969.   //#define E4_CS_PIN     -1
  2970.   //#define E5_CS_PIN     -1
  2971.   //#define E6_CS_PIN     -1
  2972.   //#define E7_CS_PIN     -1
  2973.  
  2974.   /**
  2975.    * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160).
  2976.    * The default SW SPI pins are defined the respective pins files,
  2977.    * but you can override or define them here.
  2978.    */
  2979.   //#define TMC_USE_SW_SPI
  2980.   //#define TMC_SPI_MOSI  -1
  2981.   //#define TMC_SPI_MISO  -1
  2982.   //#define TMC_SPI_SCK   -1
  2983.  
  2984.   // @section tmc/serial
  2985.  
  2986.   /**
  2987.    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
  2988.    * Set the address using jumpers on pins MS1 and MS2.
  2989.    * Address | MS1  | MS2
  2990.    *       0 | LOW  | LOW
  2991.    *       1 | HIGH | LOW
  2992.    *       2 | LOW  | HIGH
  2993.    *       3 | HIGH | HIGH
  2994.    *
  2995.    * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
  2996.    * on the same serial port, either here or in your board's pins file.
  2997.    */
  2998.   //#define  X_SLAVE_ADDRESS 0
  2999.   //#define  Y_SLAVE_ADDRESS 0
  3000.   //#define  Z_SLAVE_ADDRESS 0
  3001.   //#define X2_SLAVE_ADDRESS 0
  3002.   //#define Y2_SLAVE_ADDRESS 0
  3003.   //#define Z2_SLAVE_ADDRESS 0
  3004.   //#define Z3_SLAVE_ADDRESS 0
  3005.   //#define Z4_SLAVE_ADDRESS 0
  3006.   //#define  I_SLAVE_ADDRESS 0
  3007.   //#define  J_SLAVE_ADDRESS 0
  3008.   //#define  K_SLAVE_ADDRESS 0
  3009.   //#define  U_SLAVE_ADDRESS 0
  3010.   //#define  V_SLAVE_ADDRESS 0
  3011.   //#define  W_SLAVE_ADDRESS 0
  3012.   //#define E0_SLAVE_ADDRESS 0
  3013.   //#define E1_SLAVE_ADDRESS 0
  3014.   //#define E2_SLAVE_ADDRESS 0
  3015.   //#define E3_SLAVE_ADDRESS 0
  3016.   //#define E4_SLAVE_ADDRESS 0
  3017.   //#define E5_SLAVE_ADDRESS 0
  3018.   //#define E6_SLAVE_ADDRESS 0
  3019.   //#define E7_SLAVE_ADDRESS 0
  3020.  
  3021.   // @section tmc/smart
  3022.  
  3023.   /**
  3024.    * Software enable
  3025.    *
  3026.    * Use for drivers that do not use a dedicated enable pin, but rather handle the same
  3027.    * function through a communication line such as SPI or UART.
  3028.    */
  3029.   //#define SOFTWARE_DRIVER_ENABLE
  3030.  
  3031.   // @section tmc/stealthchop
  3032.  
  3033.   /**
  3034.    * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  3035.    * Use Trinamic's ultra quiet stepping mode.
  3036.    * When disabled, Marlin will use spreadCycle stepping mode.
  3037.    */
  3038.   #if HAS_STEALTHCHOP
  3039.     #define STEALTHCHOP_XY
  3040.     #define STEALTHCHOP_Z
  3041.     #define STEALTHCHOP_I
  3042.     #define STEALTHCHOP_J
  3043.     #define STEALTHCHOP_K
  3044.     #define STEALTHCHOP_U
  3045.     #define STEALTHCHOP_V
  3046.     #define STEALTHCHOP_W
  3047.     #define STEALTHCHOP_E
  3048.   #endif
  3049.  
  3050.   /**
  3051.    * Optimize spreadCycle chopper parameters by using predefined parameter sets
  3052.    * or with the help of an example included in the library.
  3053.    * Provided parameter sets are
  3054.    * CHOPPER_DEFAULT_12V
  3055.    * CHOPPER_DEFAULT_19V
  3056.    * CHOPPER_DEFAULT_24V
  3057.    * CHOPPER_DEFAULT_36V
  3058.    * CHOPPER_09STEP_24V   // 0.9 degree steppers (24V)
  3059.    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
  3060.    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
  3061.    *
  3062.    * Define your own with:
  3063.    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
  3064.    */
  3065.   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
  3066.   //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
  3067.   //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
  3068.   //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
  3069.   //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
  3070.   //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
  3071.   //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
  3072.   //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
  3073.   //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
  3074.   //#define CHOPPER_TIMING_I  CHOPPER_TIMING        // For I Axis
  3075.   //#define CHOPPER_TIMING_J  CHOPPER_TIMING        // For J Axis
  3076.   //#define CHOPPER_TIMING_K  CHOPPER_TIMING        // For K Axis
  3077.   //#define CHOPPER_TIMING_U  CHOPPER_TIMING        // For U Axis
  3078.   //#define CHOPPER_TIMING_V  CHOPPER_TIMING        // For V Axis
  3079.   //#define CHOPPER_TIMING_W  CHOPPER_TIMING        // For W Axis
  3080.   //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
  3081.   //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
  3082.   //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
  3083.   //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
  3084.   //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
  3085.   //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
  3086.   //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
  3087.   //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
  3088.  
  3089.   // @section tmc/status
  3090.  
  3091.   /**
  3092.    * Monitor Trinamic drivers
  3093.    * for error conditions like overtemperature and short to ground.
  3094.    * To manage over-temp Marlin can decrease the driver current until the error condition clears.
  3095.    * Other detected conditions can be used to stop the current print.
  3096.    * Relevant G-codes:
  3097.    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
  3098.    * M911 - Report stepper driver overtemperature pre-warn condition.
  3099.    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
  3100.    * M122 - Report driver parameters (Requires TMC_DEBUG)
  3101.    */
  3102.   //#define MONITOR_DRIVER_STATUS
  3103.  
  3104.   #if ENABLED(MONITOR_DRIVER_STATUS)
  3105.     #define CURRENT_STEP_DOWN     50  // [mA]
  3106.     #define REPORT_CURRENT_CHANGE
  3107.     #define STOP_ON_ERROR
  3108.   #endif
  3109.  
  3110.   // @section tmc/hybrid
  3111.  
  3112.   /**
  3113.    * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  3114.    * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
  3115.    * This mode allows for faster movements at the expense of higher noise levels.
  3116.    * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
  3117.    * M913 X/Y/Z/E to live tune the setting
  3118.    */
  3119.   //#define HYBRID_THRESHOLD
  3120.  
  3121.   #define X_HYBRID_THRESHOLD     100  // [mm/s]
  3122.   #define X2_HYBRID_THRESHOLD    100
  3123.   #define Y_HYBRID_THRESHOLD     100
  3124.   #define Y2_HYBRID_THRESHOLD    100
  3125.   #define Z_HYBRID_THRESHOLD       3
  3126.   #define Z2_HYBRID_THRESHOLD      3
  3127.   #define Z3_HYBRID_THRESHOLD      3
  3128.   #define Z4_HYBRID_THRESHOLD      3
  3129.   #define I_HYBRID_THRESHOLD       3  // [linear=mm/s, rotational=°/s]
  3130.   #define J_HYBRID_THRESHOLD       3  // [linear=mm/s, rotational=°/s]
  3131.   #define K_HYBRID_THRESHOLD       3  // [linear=mm/s, rotational=°/s]
  3132.   #define U_HYBRID_THRESHOLD       3  // [mm/s]
  3133.   #define V_HYBRID_THRESHOLD       3
  3134.   #define W_HYBRID_THRESHOLD       3
  3135.   #define E0_HYBRID_THRESHOLD     30
  3136.   #define E1_HYBRID_THRESHOLD     30
  3137.   #define E2_HYBRID_THRESHOLD     30
  3138.   #define E3_HYBRID_THRESHOLD     30
  3139.   #define E4_HYBRID_THRESHOLD     30
  3140.   #define E5_HYBRID_THRESHOLD     30
  3141.   #define E6_HYBRID_THRESHOLD     30
  3142.   #define E7_HYBRID_THRESHOLD     30
  3143.  
  3144.   /**
  3145.    * Use StallGuard to home / probe X, Y, Z.
  3146.    *
  3147.    * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
  3148.    * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
  3149.    * X, Y, and Z homing will always be done in spreadCycle mode.
  3150.    *
  3151.    * X/Y/Z_STALL_SENSITIVITY is the default stall threshold.
  3152.    * Use M914 X Y Z to set the stall threshold at runtime:
  3153.    *
  3154.    *  Sensitivity   TMC2209   Others
  3155.    *    HIGHEST       255      -64    (Too sensitive => False positive)
  3156.    *    LOWEST         0        63    (Too insensitive => No trigger)
  3157.    *
  3158.    * It is recommended to set HOMING_BUMP_MM to { 0, 0, 0 }.
  3159.    *
  3160.    * SPI_ENDSTOPS  *** TMC2130/TMC5160 Only ***
  3161.    * Poll the driver through SPI to determine load when homing.
  3162.    * Removes the need for a wire from DIAG1 to an endstop pin.
  3163.    *
  3164.    * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
  3165.    * homing and adds a guard period for endstop triggering.
  3166.    *
  3167.    * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
  3168.    * @section tmc/stallguard
  3169.    */
  3170.   //#define SENSORLESS_HOMING // StallGuard capable drivers only
  3171.  
  3172.   #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
  3173.     // TMC2209: 0...255. TMC2130: -64...63
  3174.     #define X_STALL_SENSITIVITY  8
  3175.     #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
  3176.     #define Y_STALL_SENSITIVITY  8
  3177.     #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY
  3178.     //#define Z_STALL_SENSITIVITY  8
  3179.     //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  3180.     //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  3181.     //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  3182.     //#define I_STALL_SENSITIVITY  8
  3183.     //#define J_STALL_SENSITIVITY  8
  3184.     //#define K_STALL_SENSITIVITY  8
  3185.     //#define U_STALL_SENSITIVITY  8
  3186.     //#define V_STALL_SENSITIVITY  8
  3187.     //#define W_STALL_SENSITIVITY  8
  3188.     //#define SPI_ENDSTOPS              // TMC2130/TMC5160 only
  3189.     //#define IMPROVE_HOMING_RELIABILITY
  3190.   #endif
  3191.  
  3192.   // @section tmc/config
  3193.  
  3194.   /**
  3195.    * TMC Homing stepper phase.
  3196.    *
  3197.    * Improve homing repeatability by homing to stepper coil's nearest absolute
  3198.    * phase position. Trinamic drivers use a stepper phase table with 1024 values
  3199.    * spanning 4 full steps with 256 positions each (ergo, 1024 positions).
  3200.    * Full step positions (128, 384, 640, 896) have the highest holding torque.
  3201.    *
  3202.    * Values from 0..1023, -1 to disable homing phase for that axis.
  3203.    */
  3204.    //#define TMC_HOME_PHASE { 896, 896, 896 }
  3205.  
  3206.   /**
  3207.    * Step on both rising and falling edge signals (as with a square wave).
  3208.    */
  3209.   //#define SQUARE_WAVE_STEPPING
  3210.  
  3211.   /**
  3212.    * Enable M122 debugging command for TMC stepper drivers.
  3213.    * M122 S0/1 will enable continuous reporting.
  3214.    */
  3215.   //#define TMC_DEBUG
  3216.  
  3217.   /**
  3218.    * You can set your own advanced settings by filling in predefined functions.
  3219.    * A list of available functions can be found on the library github page
  3220.    * https://github.com/teemuatlut/TMCStepper
  3221.    *
  3222.    * Example:
  3223.    * #define TMC_ADV() { \
  3224.    *   stepperX.diag0_otpw(1); \
  3225.    *   stepperY.intpol(0); \
  3226.    * }
  3227.    */
  3228.   #define TMC_ADV() {  }
  3229.  
  3230. #endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
  3231.  
  3232. // @section i2cbus
  3233.  
  3234. //
  3235. // I2C Master ID for LPC176x LCD and Digital Current control
  3236. // Does not apply to other peripherals based on the Wire library.
  3237. //
  3238. //#define I2C_MASTER_ID  1  // Set a value from 0 to 2
  3239.  
  3240. /**
  3241.  * TWI/I2C BUS
  3242.  *
  3243.  * This feature is EXPERIMENTAL but may be useful for custom I2C peripherals.
  3244.  * Enable this to send and receive I2C data from slave devices on the bus.
  3245.  *
  3246.  * ; Example #1
  3247.  * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
  3248.  * ; It uses multiple M260 commands with one B<base 10> arg
  3249.  * M260 A99  ; Target slave address
  3250.  * M260 B77  ; M
  3251.  * M260 B97  ; a
  3252.  * M260 B114 ; r
  3253.  * M260 B108 ; l
  3254.  * M260 B105 ; i
  3255.  * M260 B110 ; n
  3256.  * M260 S1   ; Send the current buffer
  3257.  *
  3258.  * ; Example #2
  3259.  * ; Request 6 bytes from slave device with address 0x63 (99)
  3260.  * M261 A99 B5
  3261.  *
  3262.  * ; Example #3
  3263.  * ; Example serial output of a M261 request
  3264.  * echo:i2c-reply: from:99 bytes:5 data:hello
  3265.  */
  3266.  
  3267. //#define EXPERIMENTAL_I2CBUS
  3268. #if ENABLED(EXPERIMENTAL_I2CBUS)
  3269.   #define I2C_SLAVE_ADDRESS  0  // Set a value from 8 to 127 to act as a slave
  3270. #endif
  3271.  
  3272. // @section photo
  3273.  
  3274. /**
  3275.  * Photo G-code
  3276.  * Add the M240 G-code to take a photo.
  3277.  * The photo can be triggered by a digital pin or a physical movement.
  3278.  */
  3279. //#define PHOTO_GCODE
  3280. #if ENABLED(PHOTO_GCODE)
  3281.   // A position to move to (and raise Z) before taking the photo
  3282.   //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 }  // { xpos, ypos, zraise } (M240 X Y Z)
  3283.   //#define PHOTO_DELAY_MS   100                            // (ms) Duration to pause before moving back (M240 P)
  3284.   //#define PHOTO_RETRACT_MM   6.5                          // (mm) E retract/recover for the photo move (M240 R S)
  3285.  
  3286.   // Canon RC-1 or homebrew digital camera trigger
  3287.   // Data from: https://www.doc-diy.net/photo/rc-1_hacked/
  3288.   //#define PHOTOGRAPH_PIN 23
  3289.  
  3290.   // Canon Hack Development Kit
  3291.   // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
  3292.   //#define CHDK_PIN        4
  3293.  
  3294.   // Optional second move with delay to trigger the camera shutter
  3295.   //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS }  // { xpos, ypos } (M240 I J)
  3296.  
  3297.   // Duration to hold the switch or keep CHDK_PIN high
  3298.   //#define PHOTO_SWITCH_MS   50 // (ms) (M240 D)
  3299.  
  3300.   /**
  3301.    * PHOTO_PULSES_US may need adjustment depending on board and camera model.
  3302.    * Pin must be running at 48.4kHz.
  3303.    * Be sure to use a PHOTOGRAPH_PIN which can rise and fall quick enough.
  3304.    * (e.g., MKS SBase temp sensor pin was too slow, so used P1.23 on J8.)
  3305.    *
  3306.    *  Example pulse data for Nikon: https://bit.ly/2FKD0Aq
  3307.    *                     IR Wiring: https://git.io/JvJf7
  3308.    */
  3309.   //#define PHOTO_PULSES_US { 2000, 27850, 400, 1580, 400, 3580, 400 }  // (µs) Durations for each 48.4kHz oscillation
  3310.   #ifdef PHOTO_PULSES_US
  3311.     #define PHOTO_PULSE_DELAY_US 13 // (µs) Approximate duration of each HIGH and LOW pulse in the oscillation
  3312.   #endif
  3313. #endif
  3314.  
  3315. // @section cnc
  3316.  
  3317. /**
  3318.  * Spindle & Laser control
  3319.  *
  3320.  * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
  3321.  * to set spindle speed, spindle direction, and laser power.
  3322.  *
  3323.  * SuperPid is a router/spindle speed controller used in the CNC milling community.
  3324.  * Marlin can be used to turn the spindle on and off. It can also be used to set
  3325.  * the spindle speed from 5,000 to 30,000 RPM.
  3326.  *
  3327.  * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
  3328.  * hardware PWM pin for the speed control and a pin for the rotation direction.
  3329.  *
  3330.  * See https://marlinfw.org/docs/configuration/2.0.9/laser_spindle.html for more config details.
  3331.  */
  3332. //#define SPINDLE_FEATURE
  3333. //#define LASER_FEATURE
  3334. #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
  3335.   #define SPINDLE_LASER_ACTIVE_STATE    LOW    // Set to "HIGH" if SPINDLE_LASER_ENA_PIN is active HIGH
  3336.  
  3337.   #define SPINDLE_LASER_USE_PWM                // Enable if your controller supports setting the speed/power
  3338.   #if ENABLED(SPINDLE_LASER_USE_PWM)
  3339.     #define SPINDLE_LASER_PWM_INVERT    false  // Set to "true" if the speed/power goes up when you want it to go slower
  3340.     #define SPINDLE_LASER_FREQUENCY     2500   // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
  3341.                                                // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander
  3342.                                                //  the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ...
  3343.                                                //  (250000 / SPINDLE_LASER_FREQUENCY) = max value.
  3344.   #endif
  3345.  
  3346.   //#define AIR_EVACUATION                     // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
  3347.   #if ENABLED(AIR_EVACUATION)
  3348.     #define AIR_EVACUATION_ACTIVE       LOW    // Set to "HIGH" if the on/off function is active HIGH
  3349.     //#define AIR_EVACUATION_PIN        42     // Override the default Cutter Vacuum or Laser Blower pin
  3350.   #endif
  3351.  
  3352.   //#define AIR_ASSIST                         // Air Assist control with G-codes M8-M9
  3353.   #if ENABLED(AIR_ASSIST)
  3354.     #define AIR_ASSIST_ACTIVE           LOW    // Active state on air assist pin
  3355.     //#define AIR_ASSIST_PIN            44     // Override the default Air Assist pin
  3356.   #endif
  3357.  
  3358.   //#define SPINDLE_SERVO                      // A servo converting an angle to spindle power
  3359.   #ifdef SPINDLE_SERVO
  3360.     #define SPINDLE_SERVO_NR   0               // Index of servo used for spindle control
  3361.     #define SPINDLE_SERVO_MIN 10               // Minimum angle for servo spindle
  3362.   #endif
  3363.  
  3364.   /**
  3365.    * Speed / Power can be set ('M3 S') and displayed in terms of:
  3366.    *  - PWM255  (S0 - S255)
  3367.    *  - PERCENT (S0 - S100)
  3368.    *  - RPM     (S0 - S50000)  Best for use with a spindle
  3369.    *  - SERVO   (S0 - S180)
  3370.    */
  3371.   #define CUTTER_POWER_UNIT PWM255
  3372.  
  3373.   /**
  3374.    * Relative Cutter Power
  3375.    * Normally, 'M3 O<power>' sets
  3376.    * OCR power is relative to the range SPEED_POWER_MIN...SPEED_POWER_MAX.
  3377.    * so input powers of 0...255 correspond to SPEED_POWER_MIN...SPEED_POWER_MAX
  3378.    * instead of normal range (0 to SPEED_POWER_MAX).
  3379.    * Best used with (e.g.) SuperPID router controller: S0 = 5,000 RPM and S255 = 30,000 RPM
  3380.    */
  3381.   //#define CUTTER_POWER_RELATIVE              // Set speed proportional to [SPEED_POWER_MIN...SPEED_POWER_MAX]
  3382.  
  3383.   #if ENABLED(SPINDLE_FEATURE)
  3384.     //#define SPINDLE_CHANGE_DIR               // Enable if your spindle controller can change spindle direction
  3385.     #define SPINDLE_CHANGE_DIR_STOP            // Enable if the spindle should stop before changing spin direction
  3386.     #define SPINDLE_INVERT_DIR          false  // Set to "true" if the spin direction is reversed
  3387.  
  3388.     #define SPINDLE_LASER_POWERUP_DELAY   5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
  3389.     #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
  3390.  
  3391.     /**
  3392.      * M3/M4 Power Equation
  3393.      *
  3394.      * Each tool uses different value ranges for speed / power control.
  3395.      * These parameters are used to convert between tool power units and PWM.
  3396.      *
  3397.      * Speed/Power = (PWMDC / 255 * 100 - SPEED_POWER_INTERCEPT) / SPEED_POWER_SLOPE
  3398.      * PWMDC = (spdpwr - SPEED_POWER_MIN) / (SPEED_POWER_MAX - SPEED_POWER_MIN) / SPEED_POWER_SLOPE
  3399.      */
  3400.     #if ENABLED(SPINDLE_LASER_USE_PWM)
  3401.       #define SPEED_POWER_INTERCEPT       0    // (%) 0-100 i.e., Minimum power percentage
  3402.       #define SPEED_POWER_MIN          5000    // (RPM)
  3403.       #define SPEED_POWER_MAX         30000    // (RPM) SuperPID router controller 0 - 30,000 RPM
  3404.       #define SPEED_POWER_STARTUP     25000    // (RPM) M3/M4 speed/power default (with no arguments)
  3405.     #endif
  3406.  
  3407.   #else
  3408.  
  3409.     #if ENABLED(SPINDLE_LASER_USE_PWM)
  3410.       #define SPEED_POWER_INTERCEPT       0    // (%) 0-100 i.e., Minimum power percentage
  3411.       #define SPEED_POWER_MIN             0    // (%) 0-100
  3412.       #define SPEED_POWER_MAX           100    // (%) 0-100
  3413.       #define SPEED_POWER_STARTUP        80    // (%) M3/M4 speed/power default (with no arguments)
  3414.     #endif
  3415.  
  3416.     // Define the minimum and maximum test pulse time values for a laser test fire function
  3417.     #define LASER_TEST_PULSE_MIN           1   // (ms) Used with Laser Control Menu
  3418.     #define LASER_TEST_PULSE_MAX         999   // (ms) Caution: Menu may not show more than 3 characters
  3419.  
  3420.     #define SPINDLE_LASER_POWERUP_DELAY   50   // (ms) Delay to allow the spindle/laser to come up to speed/power
  3421.     #define SPINDLE_LASER_POWERDOWN_DELAY 50   // (ms) Delay to allow the spindle to stop
  3422.  
  3423.    /**
  3424.     * Laser Safety Timeout
  3425.     *
  3426.     * The laser should be turned off when there is no movement for a period of time.
  3427.     * Consider material flammability, cut rate, and G-code order when setting this
  3428.     * value. Too low and it could turn off during a very slow move; too high and
  3429.     * the material could ignite.
  3430.     */
  3431.     #define LASER_SAFETY_TIMEOUT_MS     1000   // (ms)
  3432.  
  3433.     /**
  3434.      * Any M3 or G1/2/3/5 command with the 'I' parameter enables continuous inline power mode.
  3435.      *
  3436.      * e.g., 'M3 I' enables continuous inline power which is processed by the planner.
  3437.      * Power is stored in move blocks and applied when blocks are processed by the Stepper ISR.
  3438.      *
  3439.      * 'M4 I' sets dynamic mode which uses the current feedrate to calculate a laser power OCR value.
  3440.      *
  3441.      * Any move in dynamic mode will use the current feedrate to calculate the laser power.
  3442.      * Feed rates are set by the F parameter of a move command e.g. G1 X0 Y10 F6000
  3443.      * Laser power would be calculated by bit shifting off 8 LSB's. In binary this is div 256.
  3444.      * The calculation gives us ocr values from 0 to 255, values over F65535 will be set as 255 .
  3445.      * More refined power control such as compensation for accel/decel will be addressed in future releases.
  3446.      *
  3447.      * M5 I clears inline mode and set power to 0, M5 sets the power output to 0 but leaves inline mode on.
  3448.      */
  3449.  
  3450.     /**
  3451.      * Enable M3 commands for laser mode inline power planner syncing.
  3452.      * This feature enables any M3 S-value to be injected into the block buffers while in
  3453.      * CUTTER_MODE_CONTINUOUS. The option allows M3 laser power to be committed without waiting
  3454.      * for a planner synchronization
  3455.      */
  3456.     //#define LASER_POWER_SYNC
  3457.  
  3458.     /**
  3459.      * Scale the laser's power in proportion to the movement rate.
  3460.      *
  3461.      * - Sets the entry power proportional to the entry speed over the nominal speed.
  3462.      * - Ramps the power up every N steps to approximate the speed trapezoid.
  3463.      * - Due to the limited power resolution this is only approximate.
  3464.      */
  3465.     //#define LASER_POWER_TRAP
  3466.  
  3467.     //
  3468.     // Laser I2C Ammeter (High precision INA226 low/high side module)
  3469.     //
  3470.     //#define I2C_AMMETER
  3471.     #if ENABLED(I2C_AMMETER)
  3472.       #define I2C_AMMETER_IMAX            0.1    // (Amps) Calibration value for the expected current range
  3473.       #define I2C_AMMETER_SHUNT_RESISTOR  0.1    // (Ohms) Calibration shunt resistor value
  3474.     #endif
  3475.  
  3476.     //
  3477.     // Laser Coolant Flow Meter
  3478.     //
  3479.     //#define LASER_COOLANT_FLOW_METER
  3480.     #if ENABLED(LASER_COOLANT_FLOW_METER)
  3481.       #define FLOWMETER_PIN         20  // Requires an external interrupt-enabled pin (e.g., RAMPS 2,3,18,19,20,21)
  3482.       #define FLOWMETER_PPL       5880  // (pulses/liter) Flow meter pulses-per-liter on the input pin
  3483.       #define FLOWMETER_INTERVAL  1000  // (ms) Flow rate calculation interval in milliseconds
  3484.       #define FLOWMETER_SAFETY          // Prevent running the laser without the minimum flow rate set below
  3485.       #if ENABLED(FLOWMETER_SAFETY)
  3486.         #define FLOWMETER_MIN_LITERS_PER_MINUTE 1.5 // (liters/min) Minimum flow required when enabled
  3487.       #endif
  3488.     #endif
  3489.  
  3490.   #endif
  3491. #endif // SPINDLE_FEATURE || LASER_FEATURE
  3492.  
  3493. /**
  3494.  * Synchronous Laser Control with M106/M107
  3495.  *
  3496.  * Marlin normally applies M106/M107 fan speeds at a time "soon after" processing
  3497.  * a planner block. This is too inaccurate for a PWM/TTL laser attached to the fan
  3498.  * header (as with some add-on laser kits). Enable this option to set fan/laser
  3499.  * speeds with much more exact timing for improved print fidelity.
  3500.  *
  3501.  * NOTE: This option sacrifices some cooling fan speed options.
  3502.  */
  3503. //#define LASER_SYNCHRONOUS_M106_M107
  3504.  
  3505. /**
  3506.  * Coolant Control
  3507.  *
  3508.  * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
  3509.  *
  3510.  * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
  3511.  */
  3512. //#define COOLANT_CONTROL
  3513. #if ENABLED(COOLANT_CONTROL)
  3514.   #define COOLANT_MIST                // Enable if mist coolant is present
  3515.   #define COOLANT_FLOOD               // Enable if flood coolant is present
  3516.   #define COOLANT_MIST_INVERT  false  // Set "true" if the on/off function is reversed
  3517.   #define COOLANT_FLOOD_INVERT false  // Set "true" if the on/off function is reversed
  3518. #endif
  3519.  
  3520. // @section filament width
  3521.  
  3522. /**
  3523.  * Filament Width Sensor
  3524.  *
  3525.  * Measures the filament width in real-time and adjusts
  3526.  * flow rate to compensate for any irregularities.
  3527.  *
  3528.  * Also allows the measured filament diameter to set the
  3529.  * extrusion rate, so the slicer only has to specify the
  3530.  * volume.
  3531.  *
  3532.  * Only a single extruder is supported at this time.
  3533.  *
  3534.  *  34 RAMPS_14    : Analog input 5 on the AUX2 connector
  3535.  *  81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
  3536.  * 301 RAMBO       : Analog input 3
  3537.  *
  3538.  * Note: May require analog pins to be defined for other boards.
  3539.  */
  3540. //#define FILAMENT_WIDTH_SENSOR
  3541.  
  3542. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  3543.   #define FILAMENT_SENSOR_EXTRUDER_NUM 0    // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
  3544.   #define MEASUREMENT_DELAY_CM        14    // (cm) The distance from the filament sensor to the melting chamber
  3545.  
  3546.   #define FILWIDTH_ERROR_MARGIN        1.0  // (mm) If a measurement differs too much from nominal width ignore it
  3547.   #define MAX_MEASUREMENT_DELAY       20    // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
  3548.  
  3549.   #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
  3550.  
  3551.   // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
  3552.   //#define FILAMENT_LCD_DISPLAY
  3553. #endif
  3554.  
  3555. // @section power
  3556.  
  3557. /**
  3558.  * Power Monitor
  3559.  * Monitor voltage (V) and/or current (A), and -when possible- power (W)
  3560.  *
  3561.  * Read and configure with M430
  3562.  *
  3563.  * The current sensor feeds DC voltage (relative to the measured current) to an analog pin
  3564.  * The voltage sensor feeds DC voltage (relative to the measured voltage) to an analog pin
  3565.  */
  3566. //#define POWER_MONITOR_CURRENT   // Monitor the system current
  3567. //#define POWER_MONITOR_VOLTAGE   // Monitor the system voltage
  3568.  
  3569. #if ENABLED(POWER_MONITOR_CURRENT)
  3570.   #define POWER_MONITOR_VOLTS_PER_AMP    0.05000  // Input voltage to the MCU analog pin per amp  - DO NOT apply more than ADC_VREF!
  3571.   #define POWER_MONITOR_CURRENT_OFFSET   0        // Offset (in amps) applied to the calculated current
  3572.   #define POWER_MONITOR_FIXED_VOLTAGE   13.6      // Voltage for a current sensor with no voltage sensor (for power display)
  3573. #endif
  3574.  
  3575. #if ENABLED(POWER_MONITOR_VOLTAGE)
  3576.   #define POWER_MONITOR_VOLTS_PER_VOLT  0.077933  // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF!
  3577.   #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
  3578. #endif
  3579.  
  3580. // @section safety
  3581.  
  3582. /**
  3583.  * Stepper Driver Anti-SNAFU Protection
  3584.  *
  3585.  * If the SAFE_POWER_PIN is defined for your board, Marlin will check
  3586.  * that stepper drivers are properly plugged in before applying power.
  3587.  * Disable protection if your stepper drivers don't support the feature.
  3588.  */
  3589. //#define DISABLE_DRIVER_SAFE_POWER_PROTECT
  3590.  
  3591. // @section cnc
  3592.  
  3593. /**
  3594.  * CNC Coordinate Systems
  3595.  *
  3596.  * Enables G53 and G54-G59.3 commands to select coordinate systems
  3597.  * and G92.1 to reset the workspace to native machine space.
  3598.  */
  3599. //#define CNC_COORDINATE_SYSTEMS
  3600.  
  3601. // @section reporting
  3602.  
  3603. /**
  3604.  * Auto-report fan speed with M123 S<seconds>
  3605.  * Requires fans with tachometer pins
  3606.  */
  3607. //#define AUTO_REPORT_FANS
  3608.  
  3609. /**
  3610.  * Auto-report temperatures with M155 S<seconds>
  3611.  */
  3612. #define AUTO_REPORT_TEMPERATURES
  3613. #if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
  3614.   //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
  3615. #endif
  3616.  
  3617. /**
  3618.  * Auto-report position with M154 S<seconds>
  3619.  */
  3620. //#define AUTO_REPORT_POSITION
  3621.  
  3622. /**
  3623.  * Include capabilities in M115 output
  3624.  */
  3625. #define EXTENDED_CAPABILITIES_REPORT
  3626. #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
  3627.   //#define M115_GEOMETRY_REPORT
  3628. #endif
  3629.  
  3630. // @section security
  3631.  
  3632. /**
  3633.  * Expected Printer Check
  3634.  * Add the M16 G-code to compare a string to the MACHINE_NAME.
  3635.  * M16 with a non-matching string causes the printer to halt.
  3636.  */
  3637. //#define EXPECTED_PRINTER_CHECK
  3638.  
  3639. // @section volumetrics
  3640.  
  3641. /**
  3642.  * Disable all Volumetric extrusion options
  3643.  */
  3644. //#define NO_VOLUMETRICS
  3645.  
  3646. #if DISABLED(NO_VOLUMETRICS)
  3647.   /**
  3648.    * Volumetric extrusion default state
  3649.    * Activate to make volumetric extrusion the default method,
  3650.    * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  3651.    *
  3652.    * M200 D0 to disable, M200 Dn to set a new diameter (and enable volumetric).
  3653.    * M200 S0/S1 to disable/enable volumetric extrusion.
  3654.    */
  3655.   //#define VOLUMETRIC_DEFAULT_ON
  3656.  
  3657.   //#define VOLUMETRIC_EXTRUDER_LIMIT
  3658.   #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
  3659.     /**
  3660.      * Default volumetric extrusion limit in cubic mm per second (mm^3/sec).
  3661.      * This factory setting applies to all extruders.
  3662.      * Use 'M200 [T<extruder>] L<limit>' to override and 'M502' to reset.
  3663.      * A non-zero value activates Volume-based Extrusion Limiting.
  3664.      */
  3665.     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
  3666.   #endif
  3667. #endif
  3668.  
  3669. // @section reporting
  3670.  
  3671. // Extra options for the M114 "Current Position" report
  3672. //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
  3673. //#define M114_REALTIME       // Real current position based on forward kinematics
  3674. //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
  3675.  
  3676. //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)
  3677.  
  3678. // @section gcode
  3679.  
  3680. /**
  3681.  * Spend 28 bytes of SRAM to optimize the G-code parser
  3682.  */
  3683. #define FASTER_GCODE_PARSER
  3684.  
  3685. #if ENABLED(FASTER_GCODE_PARSER)
  3686.   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
  3687. #endif
  3688.  
  3689. /**
  3690.  * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
  3691.  */
  3692. //#define MEATPACK_ON_SERIAL_PORT_1
  3693. //#define MEATPACK_ON_SERIAL_PORT_2
  3694.  
  3695. //#define GCODE_CASE_INSENSITIVE  // Accept G-code sent to the firmware in lowercase
  3696.  
  3697. //#define REPETIER_GCODE_M360     // Add commands originally from Repetier FW
  3698.  
  3699. /**
  3700.  * Enable this option for a leaner build of Marlin that removes all
  3701.  * workspace offsets, simplifying coordinate transformations, leveling, etc.
  3702.  *
  3703.  *  - M206 and M428 are disabled.
  3704.  *  - G92 will revert to its behavior from Marlin 1.0.
  3705.  */
  3706. //#define NO_WORKSPACE_OFFSETS
  3707.  
  3708. /**
  3709.  * CNC G-code options
  3710.  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
  3711.  * Note that G0 feedrates should be used with care for 3D printing (if used at all).
  3712.  * High feedrates may cause ringing and harm print quality.
  3713.  */
  3714. //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
  3715. //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
  3716.  
  3717. // Enable and set a (default) feedrate for all G0 moves
  3718. //#define G0_FEEDRATE 3000 // (mm/min)
  3719. #ifdef G0_FEEDRATE
  3720.   //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
  3721. #endif
  3722.  
  3723. /**
  3724.  * Startup commands
  3725.  *
  3726.  * Execute certain G-code commands immediately after power-on.
  3727.  */
  3728. //#define STARTUP_COMMANDS "M17 Z"
  3729.  
  3730. /**
  3731.  * G-code Macros
  3732.  *
  3733.  * Add G-codes M810-M819 to define and run G-code macros.
  3734.  * Macros are not saved to EEPROM.
  3735.  */
  3736. //#define GCODE_MACROS
  3737. #if ENABLED(GCODE_MACROS)
  3738.   #define GCODE_MACROS_SLOTS       5  // Up to 10 may be used
  3739.   #define GCODE_MACROS_SLOT_SIZE  50  // Maximum length of a single macro
  3740. #endif
  3741.  
  3742. /**
  3743.  * User-defined menu items to run custom G-code.
  3744.  * Up to 25 may be defined, but the actual number is LCD-dependent.
  3745.  */
  3746.  
  3747. // @section custom main menu
  3748.  
  3749. // Custom Menu: Main Menu
  3750. //#define CUSTOM_MENU_MAIN
  3751. #if ENABLED(CUSTOM_MENU_MAIN)
  3752.   //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands"
  3753.   #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done"
  3754.   #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK
  3755.   //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN   // Return to status screen after a script
  3756.   #define CUSTOM_MENU_MAIN_ONLY_IDLE         // Only show custom menu when the machine is idle
  3757.  
  3758.   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
  3759.   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
  3760.   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
  3761.  
  3762.   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
  3763.   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
  3764.   //#define MAIN_MENU_ITEM_2_CONFIRM
  3765.  
  3766.   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
  3767.   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
  3768.   //#define MAIN_MENU_ITEM_3_CONFIRM
  3769.  
  3770.   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
  3771.   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
  3772.   //#define MAIN_MENU_ITEM_4_CONFIRM
  3773.  
  3774.   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
  3775.   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
  3776.   //#define MAIN_MENU_ITEM_5_CONFIRM
  3777. #endif
  3778.  
  3779. // @section custom config menu
  3780.  
  3781. // Custom Menu: Configuration Menu
  3782. //#define CUSTOM_MENU_CONFIG
  3783. #if ENABLED(CUSTOM_MENU_CONFIG)
  3784.   //#define CUSTOM_MENU_CONFIG_TITLE "Custom Commands"
  3785.   #define CUSTOM_MENU_CONFIG_SCRIPT_DONE "M117 Wireless Script Done"
  3786.   #define CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK
  3787.   //#define CUSTOM_MENU_CONFIG_SCRIPT_RETURN  // Return to status screen after a script
  3788.   #define CUSTOM_MENU_CONFIG_ONLY_IDLE        // Only show custom menu when the machine is idle
  3789.  
  3790.   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
  3791.   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
  3792.   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
  3793.  
  3794.   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
  3795.   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
  3796.   //#define CONFIG_MENU_ITEM_2_CONFIRM
  3797.  
  3798.   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
  3799.   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
  3800.   //#define CONFIG_MENU_ITEM_3_CONFIRM
  3801.  
  3802.   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
  3803.   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
  3804.   //#define CONFIG_MENU_ITEM_4_CONFIRM
  3805.  
  3806.   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
  3807.   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
  3808.   //#define CONFIG_MENU_ITEM_5_CONFIRM
  3809. #endif
  3810.  
  3811. // @section custom buttons
  3812.  
  3813. /**
  3814.  * User-defined buttons to run custom G-code.
  3815.  * Up to 25 may be defined.
  3816.  */
  3817. //#define CUSTOM_USER_BUTTONS
  3818. #if ENABLED(CUSTOM_USER_BUTTONS)
  3819.   //#define BUTTON1_PIN -1
  3820.   #if PIN_EXISTS(BUTTON1)
  3821.     #define BUTTON1_HIT_STATE     LOW       // State of the triggered button. NC=LOW. NO=HIGH.
  3822.     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
  3823.     #define BUTTON1_GCODE         "G28"
  3824.     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
  3825.   #endif
  3826.  
  3827.   //#define BUTTON2_PIN -1
  3828.   #if PIN_EXISTS(BUTTON2)
  3829.     #define BUTTON2_HIT_STATE     LOW
  3830.     #define BUTTON2_WHEN_PRINTING false
  3831.     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
  3832.     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
  3833.   #endif
  3834.  
  3835.   //#define BUTTON3_PIN -1
  3836.   #if PIN_EXISTS(BUTTON3)
  3837.     #define BUTTON3_HIT_STATE     LOW
  3838.     #define BUTTON3_WHEN_PRINTING false
  3839.     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
  3840.     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
  3841.   #endif
  3842. #endif
  3843.  
  3844. // @section host
  3845.  
  3846. /**
  3847.  * Host Action Commands
  3848.  *
  3849.  * Define host streamer action commands in compliance with the standard.
  3850.  *
  3851.  * See https://reprap.org/wiki/G-code#Action_commands
  3852.  * Common commands ........ poweroff, pause, paused, resume, resumed, cancel
  3853.  * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
  3854.  *
  3855.  * Some features add reason codes to extend these commands.
  3856.  *
  3857.  * Host Prompt Support enables Marlin to use the host for user prompts so
  3858.  * filament runout and other processes can be managed from the host side.
  3859.  */
  3860. //#define HOST_ACTION_COMMANDS
  3861. #if ENABLED(HOST_ACTION_COMMANDS)
  3862.   //#define HOST_PAUSE_M76                // Tell the host to pause in response to M76
  3863.   //#define HOST_PROMPT_SUPPORT           // Initiate host prompts to get user feedback
  3864.   #if ENABLED(HOST_PROMPT_SUPPORT)
  3865.     //#define HOST_STATUS_NOTIFICATIONS   // Send some status messages to the host as notifications
  3866.   #endif
  3867.   //#define HOST_START_MENU_ITEM          // Add a menu item that tells the host to start
  3868.   //#define HOST_SHUTDOWN_MENU_ITEM       // Add a menu item that tells the host to shut down
  3869. #endif
  3870.  
  3871. // @section extras
  3872.  
  3873. /**
  3874.  * Cancel Objects
  3875.  *
  3876.  * Implement M486 to allow Marlin to skip objects
  3877.  */
  3878. //#define CANCEL_OBJECTS
  3879. #if ENABLED(CANCEL_OBJECTS)
  3880.   #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message
  3881. #endif
  3882.  
  3883. /**
  3884.  * I2C position encoders for closed loop control.
  3885.  * Developed by Chris Barr at Aus3D.
  3886.  *
  3887.  * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder
  3888.  * Github: https://github.com/Aus3D/MagneticEncoder
  3889.  *
  3890.  * Supplier: https://aus3d.com.au/products/magnetic-encoder-module
  3891.  * Alternative Supplier: https://reliabuild3d.com/
  3892.  *
  3893.  * Reliabuild encoders have been modified to improve reliability.
  3894.  * @section i2c encoders
  3895.  */
  3896.  
  3897. //#define I2C_POSITION_ENCODERS
  3898. #if ENABLED(I2C_POSITION_ENCODERS)
  3899.  
  3900.   #define I2CPE_ENCODER_CNT         1                       // The number of encoders installed; max of 5
  3901.                                                             // encoders supported currently.
  3902.  
  3903.   #define I2CPE_ENC_1_ADDR          I2CPE_PRESET_ADDR_X     // I2C address of the encoder. 30-200.
  3904.   #define I2CPE_ENC_1_AXIS          X_AXIS                  // Axis the encoder module is installed on.  <X|Y|Z|E>_AXIS.
  3905.   #define I2CPE_ENC_1_TYPE          I2CPE_ENC_TYPE_LINEAR   // Type of encoder:  I2CPE_ENC_TYPE_LINEAR -or-
  3906.                                                             // I2CPE_ENC_TYPE_ROTARY.
  3907.   #define I2CPE_ENC_1_TICKS_UNIT    2048                    // 1024 for magnetic strips with 2mm poles; 2048 for
  3908.                                                             // 1mm poles. For linear encoders this is ticks / mm,
  3909.                                                             // for rotary encoders this is ticks / revolution.
  3910.   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
  3911.                                                             // steps per full revolution (motor steps/rev * microstepping)
  3912.   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
  3913.   #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
  3914.   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
  3915.                                                             // printer will attempt to correct the error; errors
  3916.                                                             // smaller than this are ignored to minimize effects of
  3917.                                                             // measurement noise / latency (filter).
  3918.  
  3919.   #define I2CPE_ENC_2_ADDR          I2CPE_PRESET_ADDR_Y     // Same as above, but for encoder 2.
  3920.   #define I2CPE_ENC_2_AXIS          Y_AXIS
  3921.   #define I2CPE_ENC_2_TYPE          I2CPE_ENC_TYPE_LINEAR
  3922.   #define I2CPE_ENC_2_TICKS_UNIT    2048
  3923.   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
  3924.   //#define I2CPE_ENC_2_INVERT
  3925.   #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
  3926.   #define I2CPE_ENC_2_EC_THRESH     0.10
  3927.  
  3928.   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
  3929.   #define I2CPE_ENC_3_AXIS          Z_AXIS                  // as above, or use defaults below.
  3930.  
  3931.   #define I2CPE_ENC_4_ADDR          I2CPE_PRESET_ADDR_E     // Encoder 4.
  3932.   #define I2CPE_ENC_4_AXIS          E_AXIS
  3933.  
  3934.   #define I2CPE_ENC_5_ADDR          34                      // Encoder 5.
  3935.   #define I2CPE_ENC_5_AXIS          E_AXIS
  3936.  
  3937.   // Default settings for encoders which are enabled, but without settings configured above.
  3938.   #define I2CPE_DEF_TYPE            I2CPE_ENC_TYPE_LINEAR
  3939.   #define I2CPE_DEF_ENC_TICKS_UNIT  2048
  3940.   #define I2CPE_DEF_TICKS_REV       (16 * 200)
  3941.   #define I2CPE_DEF_EC_METHOD       I2CPE_ECM_NONE
  3942.   #define I2CPE_DEF_EC_THRESH       0.1
  3943.  
  3944.   //#define I2CPE_ERR_THRESH_ABORT  100.0                   // Threshold size for error (in mm) error on any given
  3945.                                                             // axis after which the printer will abort. Comment out to
  3946.                                                             // disable abort behavior.
  3947.  
  3948.   #define I2CPE_TIME_TRUSTED        10000                   // After an encoder fault, there must be no further fault
  3949.                                                             // for this amount of time (in ms) before the encoder
  3950.                                                             // is trusted again.
  3951.  
  3952.   /**
  3953.    * Position is checked every time a new command is executed from the buffer but during long moves,
  3954.    * this setting determines the minimum update time between checks. A value of 100 works well with
  3955.    * error rolling average when attempting to correct only for skips and not for vibration.
  3956.    */
  3957.   #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
  3958.  
  3959.   // Use a rolling average to identify persistent errors that indicate skips, as opposed to vibration and noise.
  3960.   #define I2CPE_ERR_ROLLING_AVERAGE
  3961.  
  3962. #endif // I2C_POSITION_ENCODERS
  3963.  
  3964. /**
  3965.  * Analog Joystick(s)
  3966.  * @section joystick
  3967.  */
  3968. //#define JOYSTICK
  3969. #if ENABLED(JOYSTICK)
  3970.   #define JOY_X_PIN    5  // RAMPS: Suggested pin A5  on AUX2
  3971.   #define JOY_Y_PIN   10  // RAMPS: Suggested pin A10 on AUX2
  3972.   #define JOY_Z_PIN   12  // RAMPS: Suggested pin A12 on AUX2
  3973.   #define JOY_EN_PIN  44  // RAMPS: Suggested pin D44 on AUX2
  3974.  
  3975.   //#define INVERT_JOY_X  // Enable if X direction is reversed
  3976.   //#define INVERT_JOY_Y  // Enable if Y direction is reversed
  3977.   //#define INVERT_JOY_Z  // Enable if Z direction is reversed
  3978.  
  3979.   // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
  3980.   #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
  3981.   #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
  3982.   #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
  3983.   //#define JOYSTICK_DEBUG
  3984. #endif
  3985.  
  3986. /**
  3987.  * Mechanical Gantry Calibration
  3988.  * Modern replacement for the Průša TMC_Z_CALIBRATION.
  3989.  * Adds capability to work with any adjustable current drivers.
  3990.  * Implemented as G34 because M915 is deprecated.
  3991.  * @section calibrate
  3992.  */
  3993. //#define MECHANICAL_GANTRY_CALIBRATION
  3994. #if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
  3995.   #define GANTRY_CALIBRATION_CURRENT          600     // Default calibration current in ma
  3996.   #define GANTRY_CALIBRATION_EXTRA_HEIGHT      15     // Extra distance in mm past Z_###_POS to move
  3997.   #define GANTRY_CALIBRATION_FEEDRATE         500     // Feedrate for correction move
  3998.   //#define GANTRY_CALIBRATION_TO_MIN                 // Enable to calibrate Z in the MIN direction
  3999.  
  4000.   //#define GANTRY_CALIBRATION_SAFE_POSITION XY_CENTER // Safe position for nozzle
  4001.   //#define GANTRY_CALIBRATION_XY_PARK_FEEDRATE 3000  // XY Park Feedrate - MMM
  4002.   //#define GANTRY_CALIBRATION_COMMANDS_PRE   ""
  4003.   #define GANTRY_CALIBRATION_COMMANDS_POST  "G28"     // G28 highly recommended to ensure an accurate position
  4004. #endif
  4005.  
  4006. /**
  4007.  * Instant freeze / unfreeze functionality
  4008.  * Potentially useful for emergency stop that allows being resumed.
  4009.  * @section interface
  4010.  */
  4011. //#define FREEZE_FEATURE
  4012. #if ENABLED(FREEZE_FEATURE)
  4013.   //#define FREEZE_PIN 41   // Override the default (KILL) pin here
  4014.   #define FREEZE_STATE LOW  // State of pin indicating freeze
  4015. #endif
  4016.  
  4017. /**
  4018.  * MAX7219 Debug Matrix
  4019.  *
  4020.  * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
  4021.  * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  4022.  * @section debug matrix
  4023.  */
  4024. //#define MAX7219_DEBUG
  4025. #if ENABLED(MAX7219_DEBUG)
  4026.   #define MAX7219_CLK_PIN   64
  4027.   #define MAX7219_DIN_PIN   57
  4028.   #define MAX7219_LOAD_PIN  44
  4029.  
  4030.   //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
  4031.   #define MAX7219_INIT_TEST    2   // Test pattern at startup: 0=none, 1=sweep, 2=spiral
  4032.   #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
  4033.   #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
  4034.                                    // connector at:  right=0   bottom=-90  top=90  left=180
  4035.   //#define MAX7219_REVERSE_ORDER  // The order of the LED matrix units may be reversed
  4036.   //#define MAX7219_REVERSE_EACH   // The LEDs in each matrix unit row may be reversed
  4037.   //#define MAX7219_SIDE_BY_SIDE   // Big chip+matrix boards can be chained side-by-side
  4038.  
  4039.   /**
  4040.    * Sample debug features
  4041.    * If you add more debug displays, be careful to avoid conflicts!
  4042.    */
  4043.   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
  4044.   #define MAX7219_DEBUG_PLANNER_HEAD  2  // Show the planner queue head position on this and the next LED matrix row
  4045.   #define MAX7219_DEBUG_PLANNER_TAIL  4  // Show the planner queue tail position on this and the next LED matrix row
  4046.  
  4047.   #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
  4048.                                          // If you experience stuttering, reboots, etc. this option can reveal how
  4049.                                          // tweaks made to the configuration are affecting the printer in real-time.
  4050.   #define MAX7219_DEBUG_PROFILE       6  // Display the fraction of CPU time spent in profiled code on this LED matrix
  4051.                                          // row. By default idle() is profiled so this shows how "idle" the processor is.
  4052.                                          // See class CodeProfiler.
  4053. #endif
  4054.  
  4055. /**
  4056.  * NanoDLP Sync support
  4057.  *
  4058.  * Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
  4059.  * output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
  4060.  * This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
  4061.  * @section nanodlp
  4062.  */
  4063. //#define NANODLP_Z_SYNC
  4064. #if ENABLED(NANODLP_Z_SYNC)
  4065.   //#define NANODLP_ALL_AXIS  // Send a "Z_move_comp" report for any axis move (not just Z).
  4066. #endif
  4067.  
  4068. /**
  4069.  * Ethernet. Use M552 to enable and set the IP address.
  4070.  * @section network
  4071.  */
  4072. #if HAS_ETHERNET
  4073.   #define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D }  // A MAC address unique to your network
  4074. #endif
  4075.  
  4076. /**
  4077.  * Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module
  4078.  */
  4079. //#define WIFISUPPORT         // Marlin embedded WiFi management. Not needed for simple WiFi serial port.
  4080. //#define ESP3D_WIFISUPPORT   // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
  4081.  
  4082. /**
  4083.  * Extras for an ESP32-based motherboard with WIFISUPPORT
  4084.  * These options don't apply to add-on WiFi modules based on ESP32 WiFi101.
  4085.  */
  4086. #if ENABLED(WIFISUPPORT)
  4087.   //#define WEBSUPPORT          // Start a webserver (which may include auto-discovery) using SPIFFS
  4088.   //#define OTASUPPORT          // Support over-the-air firmware updates
  4089.   //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
  4090.  
  4091.   /**
  4092.    * To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
  4093.    * the following defines, customized for your network. This specific file is excluded via
  4094.    * .gitignore to prevent it from accidentally leaking to the public.
  4095.    *
  4096.    *   #define WIFI_SSID "WiFi SSID"
  4097.    *   #define WIFI_PWD  "WiFi Password"
  4098.    */
  4099.   //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
  4100. #endif
  4101.  
  4102. // @section multi-material
  4103.  
  4104. /**
  4105.  * Průša Multi-Material Unit (MMU)
  4106.  * Enable in Configuration.h
  4107.  *
  4108.  * These devices allow a single stepper driver on the board to drive
  4109.  * multi-material feeders with any number of stepper motors.
  4110.  */
  4111. #if HAS_PRUSA_MMU1
  4112.   /**
  4113.    * This option only allows the multiplexer to switch on tool-change.
  4114.    * Additional options to configure custom E moves are pending.
  4115.    *
  4116.    * Override the default DIO selector pins here, if needed.
  4117.    * Some pins files may provide defaults for these pins.
  4118.    */
  4119.   //#define E_MUX0_PIN 40  // Always Required
  4120.   //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
  4121.   //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
  4122. #elif HAS_PRUSA_MMU2
  4123.   // Serial port used for communication with MMU2.
  4124.   #define MMU2_SERIAL_PORT 2
  4125.  
  4126.   // Use hardware reset for MMU if a pin is defined for it
  4127.   //#define MMU2_RST_PIN 23
  4128.  
  4129.   // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
  4130.   //#define MMU2_MODE_12V
  4131.  
  4132.   // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
  4133.   #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
  4134.  
  4135.   // Add an LCD menu for MMU2
  4136.   //#define MMU2_MENUS
  4137.  
  4138.   // Settings for filament load / unload from the LCD menu.
  4139.   // This is for Průša MK3-style extruders. Customize for your hardware.
  4140.   #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
  4141.   #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
  4142.     {  7.2, 1145 }, \
  4143.     { 14.4,  871 }, \
  4144.     { 36.0, 1393 }, \
  4145.     { 14.4,  871 }, \
  4146.     { 50.0,  198 }
  4147.  
  4148.   #define MMU2_RAMMING_SEQUENCE \
  4149.     {   1.0, 1000 }, \
  4150.     {   1.0, 1500 }, \
  4151.     {   2.0, 2000 }, \
  4152.     {   1.5, 3000 }, \
  4153.     {   2.5, 4000 }, \
  4154.     { -15.0, 5000 }, \
  4155.     { -14.0, 1200 }, \
  4156.     {  -6.0,  600 }, \
  4157.     {  10.0,  700 }, \
  4158.     { -10.0,  400 }, \
  4159.     { -50.0, 2000 }
  4160.  
  4161.   /**
  4162.    * Using a sensor like the MMU2S
  4163.    * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S.
  4164.    * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11
  4165.    */
  4166.   #if HAS_PRUSA_MMU2S
  4167.     #define MMU2_C0_RETRY   5             // Number of retries (total time = timeout*retries)
  4168.  
  4169.     #define MMU2_CAN_LOAD_FEEDRATE 800    // (mm/min)
  4170.     #define MMU2_CAN_LOAD_SEQUENCE \
  4171.       {  0.1, MMU2_CAN_LOAD_FEEDRATE }, \
  4172.       {  60.0, MMU2_CAN_LOAD_FEEDRATE }, \
  4173.       { -52.0, MMU2_CAN_LOAD_FEEDRATE }
  4174.  
  4175.     #define MMU2_CAN_LOAD_RETRACT   6.0   // (mm) Keep under the distance between Load Sequence values
  4176.     #define MMU2_CAN_LOAD_DEVIATION 0.8   // (mm) Acceptable deviation
  4177.  
  4178.     #define MMU2_CAN_LOAD_INCREMENT 0.2   // (mm) To reuse within MMU2 module
  4179.     #define MMU2_CAN_LOAD_INCREMENT_SEQUENCE \
  4180.       { -MMU2_CAN_LOAD_INCREMENT, MMU2_CAN_LOAD_FEEDRATE }
  4181.  
  4182.   #else
  4183.  
  4184.     /**
  4185.      * MMU1 Extruder Sensor
  4186.      *
  4187.      * Support for a Průša (or other) IR Sensor to detect filament near the extruder
  4188.      * and make loading more reliable. Suitable for an extruder equipped with a filament
  4189.      * sensor less than 38mm from the gears.
  4190.      *
  4191.      * During loading the extruder will stop when the sensor is triggered, then do a last
  4192.      * move up to the gears. If no filament is detected, the MMU2 can make some more attempts.
  4193.      * If all attempts fail, a filament runout will be triggered.
  4194.      */
  4195.     //#define MMU_EXTRUDER_SENSOR
  4196.     #if ENABLED(MMU_EXTRUDER_SENSOR)
  4197.       #define MMU_LOADING_ATTEMPTS_NR 5 // max. number of attempts to load filament if first load fail
  4198.     #endif
  4199.  
  4200.   #endif
  4201.  
  4202.   //#define MMU2_DEBUG  // Write debug info to serial output
  4203.  
  4204. #endif // HAS_PRUSA_MMU2
  4205.  
  4206. /**
  4207.  * Advanced Print Counter settings
  4208.  * @section stats
  4209.  */
  4210. #if ENABLED(PRINTCOUNTER)
  4211.   #define SERVICE_WARNING_BUZZES  3
  4212.   // Activate up to 3 service interval watchdogs
  4213.   //#define SERVICE_NAME_1      "Service S"
  4214.   //#define SERVICE_INTERVAL_1  100 // print hours
  4215.   //#define SERVICE_NAME_2      "Service L"
  4216.   //#define SERVICE_INTERVAL_2  200 // print hours
  4217.   //#define SERVICE_NAME_3      "Service 3"
  4218.   //#define SERVICE_INTERVAL_3    1 // print hours
  4219. #endif
  4220.  
  4221. // @section develop
  4222.  
  4223. //
  4224. // M100 Free Memory Watcher to debug memory usage
  4225. //
  4226. //#define M100_FREE_MEMORY_WATCHER
  4227.  
  4228. //
  4229. // M42 - Set pin states
  4230. //
  4231. //#define DIRECT_PIN_CONTROL
  4232.  
  4233. //
  4234. // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
  4235. //
  4236. //#define PINS_DEBUGGING
  4237.  
  4238. // Enable Tests that will run at startup and produce a report
  4239. //#define MARLIN_TEST_BUILD
  4240.  
  4241. // Enable Marlin dev mode which adds some special commands
  4242. //#define MARLIN_DEV_MODE
  4243.  
  4244. #if ENABLED(MARLIN_DEV_MODE)
  4245.   /**
  4246.    * D576 - Buffer Monitoring
  4247.    * To help diagnose print quality issues stemming from empty command buffers.
  4248.    */
  4249.   //#define BUFFER_MONITORING
  4250. #endif
  4251.  
  4252. /**
  4253.  * Postmortem Debugging captures misbehavior and outputs the CPU status and backtrace to serial.
  4254.  * When running in the debugger it will break for debugging. This is useful to help understand
  4255.  * a crash from a remote location. Requires ~400 bytes of SRAM and 5Kb of flash.
  4256.  */
  4257. //#define POSTMORTEM_DEBUGGING
  4258.  
  4259. /**
  4260.  * Software Reset options
  4261.  */
  4262. //#define SOFT_RESET_VIA_SERIAL         // 'KILL' and '^X' commands will soft-reset the controller
  4263. //#define SOFT_RESET_ON_KILL            // Use a digital button to soft-reset the controller after KILL
  4264.  
  4265. // Report uncleaned reset reason from register r2 instead of MCUSR. Supported by Optiboot on AVR.
  4266. //#define OPTIBOOT_RESET_REASON
  4267.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!