Mekanism 1.12.2 30MRF/s Fusion Reactor Setup

Laser Initiator:
    26 Laser Amplifiers
    80 Lasers

    Structure: 9x8x9
    Power:     160,000 RF/t

Fusion Reactor:
    1 Controller
    8 Reactor Glass
    5 Ports
    1 Laser Focus Matrix
    51 Frame

    (66 Total)

    1 Hohlraum
    D-T fuel (chemical infuser)
    1 Electric Pump
    8 Speed Upgrades
    8 energy Upgrades

    Structure:  5x5x5
    Input:      Deuterium, 12 mB/t
                Tritium, 12 mB/t
                Water, 1,312,000 mB/t (returned from Turbine, filled from pool)
    Output:     Steam, 1,312,000 mB/t
    Power:      400 Rf/t

Deuterium Fuel:
    4 Pumps
    1 Electrolytic Separator
    1 Ultimate gas tank
    40 ea. speed and energy upgrades
    4 Filter upgrades
    4 Muffling Upgrades

    Input: (water from pool)
    Output: Deuterium (gas), 400 mB/t
    Power: 2,560 RF/t

Evaporation:
    2 Thermal Evaporation Controller
    6 Thermal Evaporation Valves
    424 Thermal Evaporation Blocks

    4 Pumps
    2 Resistive Heaters
    32 ea. Speed and energy upgrades

    Each Structure 4x4x18

    Input: (water from pool)
    Output:  Liquid Lithium, 20 mB/t
    Power: 2,600 RF/t


Lithium Processing:
    1 Drum / Black Hole Tank
    1 Rotary Condensentrator
    1 Neutron Activator (must see sky, works during day)
    1 Ultimate Gas Tank

    16 Speed upgrades
    8 Energy Upgrades
    4 Muffling Upgrades

    Input:  Liquid Lithium, 20 mB/t
    Output: Tritium Gas, 20 mB/t
    Power: 40 RF/t

Industrial Turbine:
    8 Turbine Rotor
    16 Turbine Blade
    121 Turbine Casing
    158 Structural Glass
    1 Rotational Complex
    24 Pressure Disperser
    9 Electromagnetic Coils
    41 Saturating Condenser
    85 Turbine Vents
    2 Turbine Valves

    Structure: 7x7x13
    Input: Steam, 1,312,000 mB/t
    Output: Water, 1,312,000 mB/t

    Generates: 30,000,000+ RF/t

Notes:
  - Evap towers don't need sunlight or solar panels,
    use resistive heaters instead, set to 500 RF/tick.
    Input heat through a valve block
  - Neutron Activator needs direct sky, can be through glass
  - Laser Initiator should be charged when needed, then
    turned off.  It is a big power drain.
  - Fusion Reactor is set to 36 mB/t injection rate
  - Mekanism Pipe Throughput depends on the number of segments,
    Ultimate pipes are 64,000 mB/t/pipe.  It takes 21 pipes
    to achieve 1,312,000 mB/t.  This is needed for both steam and
    return water.
  - Turbine construction:
     Base: 7x7 Casing
     All edges: Casing
     Sides: 8x5 Structural glass, except for 2 valves,
        Above that, 3x5 Vents
     Top: 5x5 Vents
     Interior:
        Layers 1-8: 8 Turbine Rotor, stack in center
                    16 Turbine Blades, right click on rotor
        Layer 9:    1 Rotational Matrix, in center
                    24 Pressure Dispersers
        Layer 10:   9 Electromagnetic coils, 3x3 in center
                    16 Saturating Condenser, in ring around coils
        Layer 11:   25 Saturating Condenser
  - System Limiting factor is number of saturating condensers,
    controlling the return water flow rate, but it is pretty close to the
    limit of the turbine vents, and about 90% of the limit of the
    brine/lithium production.
  - The neutron activator only works during the day, but am
    ultimate gas tank easily buffers through the night, and the
    activator can catch up pretty quickly.  It may be possible
    to run out if there is a long enough sequence of rain/night
    that prevents the activator from running.
  - Use Advanced pipe instead of Ultimate for filling the steam loop,
    and set the pipes to pull from the pumps actively.  This prevents
    an annoying flicker.
  - The entire balance-of-plant power usage comes to 6,800 RF/t, plus
    160kRF/t for charging the lasers.  Basic universal cable is enough
    to handle this.
  - Extracting 30MRF/t requires 235 Ultimate cables,  or a direct
    connection to Draconic or Flux Network (Draconic must be a single
    hop, or an energy pylon directly attached to the turbine)
  - Beware that lasers may come pre-charged, and can immediately start
    destroying blocks and/or damaging the player when they are placed.