Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Runtime journal is using 5.7M (max allowed 46.1M, trying to leave 69.2M free of 455.7M available β current limit 46.1M).
- Runtime journal is using 5.7M (max allowed 46.1M, trying to leave 69.2M free of 455.7M available β current limit 46.1M).
- Booting Linux on physical CPU 0x0
- Linux version 4.9.35-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1014 SMP Fri Jun 30 14:47:43 BST 2017
- CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- CPU: div instructions available: patching division code
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
- cma: Reserved 8 MiB at 0x3a800000
- Memory policy: Data cache writealloc
- On node 0 totalpages: 241664
- free_area_init_node: node 0, pgdat 80c6ee40, node_mem_map b9faa000
- Normal zone: 2124 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 241664 pages, LIFO batch:31
- percpu: Embedded 14 pages/cpu @b9f64000 s25600 r8192 d23552 u57344
- pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
- pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
- Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e0032eda-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 936296K/966656K available (7168K kernel code, 484K rwdata, 2012K rodata, 1024K init, 778K bss, 22168K reserved, 8192K cma-reserved)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
- lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
- modules : 0x7f000000 - 0x80000000 ( 16 MB)
- .text : 0x80008000 - 0x80800000 (8160 kB)
- .init : 0x80b00000 - 0x80c00000 (1024 kB)
- .data : 0x80c00000 - 0x80c79014 ( 485 kB)
- .bss : 0x80c7b000 - 0x80d3da64 ( 779 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Hierarchical RCU implementation.
- Build-time adjustment of leaf fanout to 32.
- NR_IRQS:16 nr_irqs:16 16
- arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
- clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- Switching to timer-based delay loop, resolution 52ns
- Console: colour dummy device 80x30
- console [tty1] enabled
- Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Disabling cpuset control group subsystem
- CPU: Testing write buffer coherency: ok
- ftrace: allocating 22390 entries in 66 pages
- CPU0: update cpu_capacity 1024
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x100000 - 0x100034
- CPU1: update cpu_capacity 1024
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: update cpu_capacity 1024
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: update cpu_capacity 1024
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (153.60 BogoMIPS).
- CPU: All CPU(s) started in HYP mode.
- CPU: Virtualization extensions available.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 1024 KiB pool for atomic coherent allocations
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 8 bytes.
- Serial: AMBA PL011 UART driver
- bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
- bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- raspberrypi-firmware soc:firmware: Attached to firmware from 2017-07-03 14:16
- clocksource: Switched to clocksource arch_sys_counter
- VFS: Disk quotas dquot_6.6.0
- VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- FS-Cache: Loaded
- CacheFiles: Loaded
- NET: Registered protocol family 2
- TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
- workingset: timestamp_bits=14 max_order=18 bucket_order=4
- FS-Cache: Netfs 'nfs' registered for caching
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- BCM2708FB: allocated DMA memory fa910000
- BCM2708FB: allocated DMA channel 0 @ bb80f000
- Console: switching to colour frame buffer device 180x56
- bcm2835-rng 3f104000.rng: hwrng registered
- vc-cma: Videocore CMA driver
- vc-cma: vc_cma_base = 0x00000000
- vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- brd: module loaded
- loop: module loaded
- Loading iSCSI transport class v2.0-870.
- usbcore: registered new interface driver smsc95xx
- dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- Core Release: 2.80a
- Setting default values for core params
- Finished setting default values for core params
- Using Buffer DMA mode
- Periodic Transfer Interrupt Enhancement - disabled
- Multiprocessor Interrupt Enhancement - disabled
- OTG VER PARAM: 0, OTG VER FLAG: 0
- Dedicated Tx FIFOs mode
- WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024
- FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- dwc_otg: Microframe scheduler enabled
- WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058ef90
- WARN::hcd_init_fiq:460: FIQ ASM at 0x8058f300 length 36
- WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000
- dwc_otg 3f980000.usb: DWC OTG Controller
- dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
- Init: Port Power? op_state=1
- Init: Power Port (0)
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: DWC OTG Controller
- usb usb1: Manufacturer: Linux 4.9.35-v7+ dwc_otg_hcd
- usb usb1: SerialNumber: 3f980000.usb
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- dwc_otg: FIQ enabled
- dwc_otg: NAK holdoff enabled
- dwc_otg: FIQ split-transaction FSM enabled
- Module dwc_common_port init
- usbcore: registered new interface driver usb-storage
- mousedev: PS/2 mouse device common for all mice
- bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
- bcm2835-cpufreq: min=600000 max=1200000
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
- mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
- sdhci-pltfm: SDHCI platform and OF driver helper
- ledtrig-cpu: registered to indicate activity on CPUs
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Key type dns_resolver registered
- Registering SWP/SWPB emulation handler
- registered taskstats version 1
- vc-sm: Videocore shared memory driver
- [vc_sm_connected_init]: start
- [vc_sm_connected_init]: end - returning 0
- 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
- sdhost: log_buf @ ba907000 (fa907000)
- Indeed it is in host mode hprt0 = 00021501
- mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- random: fast init done
- mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
- mmc-bcm2835 3f300000.mmc: DMA channel allocated
- of_cfs_init
- of_cfs_init: OK
- Waiting for root device PARTUUID=e0032eda-02...
- mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- usb 1-1: new high-speed USB device number 2 using dwc_otg
- Indeed it is in host mode hprt0 = 00001101
- mmc0: host does not support reading read-only switch, assuming write-enable
- mmc0: new high speed SDHC card at address aaaa
- mmcblk0: mmc0:aaaa SL16G 14.8 GiB
- mmcblk0: p1 p2
- EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- mmc1: new high speed SDIO card at address 0001
- EXT4-fs (mmcblk0p2): recovery complete
- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 5 ports detected
- devtmpfs: mounted
- Freeing unused kernel memory: 1024K (80b00000 - 80c00000)
- usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- Detected architecture 'arm'.
- usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- smsc95xx v1.0.5
- NET: Registered protocol family 10
- Inserted module 'ipv6'
- Set hostname to <raspberry>.
- Initializing machine ID from random generator.
- Installed transient /etc/machine-id file.
- smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cb:39:80
- usb 1-1.2: new low-speed USB device number 4 using dwc_otg
- usb 1-1.2: New USB device found, idVendor=046d, idProduct=c31c
- usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.2: Product: USB Keyboard
- usb 1-1.2: Manufacturer: Logitech
- input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31C.0001/input/input0
- [/lib/systemd/system/docker.service:25] Unknown lvalue 'Delegate' in section 'Service'
- hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input0
- input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0002/input/input1
- Cannot add dependency job for unit regenerate_ssh_host_keys.service, ignoring: Unit regenerate_ssh_host_keys.service failed to load: No such file or directory.
- Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- Starting Forward Password Requests to Wall Directory Watch.
- hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input1
- usb 1-1.3: new high-speed USB device number 5 using dwc_otg
- usb 1-1.3: New USB device found, idVendor=152d, idProduct=0578
- usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1.3: Product: USB to ATA/ATAPI Bridge
- usb 1-1.3: Manufacturer: JMicron
- usb 1-1.3: SerialNumber: 0123456789ABCDEF
- usb-storage 1-1.3:1.0: USB Mass Storage device detected
- scsi host0: usb-storage 1-1.3:1.0
- starting version 215
- Journal started
- Mounted Configuration File System.
- Started Apply Kernel Variables.
- Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- Started udev Kernel Device Manager.
- Starting LSB: Set preliminary keymap...
- Starting LSB: MD array assembly...
- e2fsck 1.43.3 (04-Sep-2016)
- Superblock last mount time is in the future.
- (by less than a day, probably due to the hardware clock being incorrectly set)
- /dev/mmcblk0p2: clean, 82283/910112 files, 1185752/3878016 blocks
- Sat 22 Jul 21:04:23 UTC 2017
- Assembling MD arrays...done (no arrays found in config file or automatically).
- Started LSB: MD array assembly.
- gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- Found device /dev/disk/by-partuuid/e0032eda-01.
- Starting File System Check on /dev/disk/by-partuuid/e0032eda-01...
- usbcore: registered new interface driver brcmfmac
- Setting preliminary keymap...done.
- Started LSB: Set preliminary keymap.
- Starting Show Plymouth Boot Screen...
- Starting Remount Root and Kernel File Systems...
- Starting Sound Card.
- Reached target Sound Card.
- EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- Started Remount Root and Kernel File Systems.
- Started Various fixups to make systemd work better on Debian.
- Starting Load/Save Random Seed...
- Starting Local File Systems (Pre).
- Reached target Local File Systems (Pre).
- Started Load/Save Random Seed.
- brcmfmac: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
- fsck.fat 3.0.27 (2014-11-12)
- 0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
- Automatically removing dirty bit.
- Performing changes.
- /dev/mmcblk0p1: 142 files, 42835/82644 clusters
- Started File System Check on /dev/disk/by-partuuid/e0032eda-01.
- Mounting /boot...
- scsi 0:0:0:0: Direct-Access JMicron Generic 8101 PQ: 0 ANSI: 6
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- Starting system-systemd\x2drfkill.slice.
- Created slice system-systemd\x2drfkill.slice.
- Starting Load/Save RF Kill Switch Status of rfkill0...
- Mounted /boot.
- Received SIGRTMIN+20 from PID 268 (plymouthd).
- Started Show Plymouth Boot Screen.
- Started Load/Save RF Kill Switch Status of rfkill0.
- Started Dispatch Password Requests to Console Directory Watch.
- Starting Paths.
- Reached target Paths.
- Starting Forward Password Requests to Plymouth Directory Watch.
- Started Forward Password Requests to Plymouth Directory Watch.
- Started udev Wait for Complete Device Initialization.
- Starting Activation of LVM2 logical volumes...
- Starting Copy rules generated while the root was ro...
- Started Copy rules generated while the root was ro.
- Starting system-ifup.slice.
- Created slice system-ifup.slice.
- No volume groups found
- Started Activation of LVM2 logical volumes.
- Starting Encrypted Volumes.
- Reached target Encrypted Volumes.
- Starting Activation of LVM2 logical volumes...
- sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1
- sd 0:0:0:0: [sda] Attached SCSI disk
- Starting system-lvm2\x2dpvscan.slice.
- Created slice system-lvm2\x2dpvscan.slice.
- Starting LVM2 PV scan on device 8:1...
- Started LVM2 PV scan on device 8:1.
- No volume groups found
- Started Activation of LVM2 logical volumes.
- Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
- device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
- random: crng init done
- usb 1-1.2: USB disconnect, device number 4
- Job dev-serverdata-web_data.device/start timed out.
- Timed out waiting for device dev-serverdata-web_data.device.
- Dependency failed for /data.
- Dependency failed for Local File Systems.
- Triggering OnFailure= dependencies of local-fs.target.
- Stopped Run certbot twice daily.
- Stopped Daily Cleanup of Temporary Directories.
- Stopped Getty on tty1.
- Stopped getty on tty2-tty6 if dbus and logind are not available.
- Stopped target Graphical Interface.
- Stopped target Multi-User System.
- Stopped Avahi mDNS/DNS-SD Stack.
- Closed Avahi mDNS/DNS-SD Stack Activation Socket.
- Stopped Regular background program processing daemon.
- Stopped Configure Bluetooth Modems connected by UART.
- Stopped Transmission BitTorrent Daemon.
- Stopped Docker Application Container Engine.
- Closed Docker Socket for the API.
- Stopped Turn on SSH if /boot/ssh is present.
- Stopped OpenBSD Secure Shell server.
- Stopped dhcpcd on all interfaces.
- Stopped Advanced key-value store.
- Stopped Terminate Plymouth Boot Screen.
- Stopped D-Bus System Message Bus.
- Stopped Hold until boot process finishes up.
- Stopped Permit User Sessions.
- Stopped /etc/rc.local Compatibility.
- Stopped Login Service.
- Closed D-Bus System Message Bus Socket.
- Starting Login Prompts.
- Reached target Login Prompts.
- Stopped LSB: Apache2 web server.
- Stopped LSB: Set up cgroupfs mounts..
- Stopped LSB: exim Mail Transport Agent.
- Stopped LSB: Start and stop the mysql database server daemon.
- Stopped LSB: start DirMngr daemon.
- Stopped LSB: Autogenerate and use a swap file.
- Stopped LSB: triggerhappy hotkey daemon.
- Stopped LSB: keep memory of all UPnP devices that announced themselves.
- Stopped LSB: Start NTP daemon.
- Starting Remote File Systems.
- Reached target Remote File Systems.
- Starting Trigger Flushing of Journal to Persistent Storage...
- Stopped System Logging Service.
- Stopped target Basic System.
- Starting Timers.
- Reached target Timers.
- Stopped target System Initialization.
- Started Manage Sound Card State (restore and store).
- Starting Restore Sound Card State...
- Starting Create Volatile Files and Directories...
- Starting Tell Plymouth To Write Out Runtime Data...
- Starting LSB: Prepare console...
- Starting LSB: Switch to ondemand cpu governor (unless shift key is pressed)...
- Starting LSB: Raise network interfaces....
- Stopping Syslog Socket.
- Closed Syslog Socket.
- Starting Sockets.
- Reached target Sockets.
- Starting Emergency Shell...
- Started Emergency Shell.
- Starting Emergency Mode.
- Reached target Emergency Mode.
- Started Restore Sound Card State.
- Started Create Volatile Files and Directories.
- Runtime journal is using 5.7M (max allowed 46.1M, trying to leave 69.2M free of 455.5M available β current limit 46.1M).
- Started Trigger Flushing of Journal to Persistent Storage.
- Starting Update UTMP about System Boot/Shutdown...
- Started Tell Plymouth To Write Out Runtime Data.
- Started Update UTMP about System Boot/Shutdown.
- Checking if shift key is held down:Error opening '/dev/input/event*': No such file or directory
- Setting console screen modes.
- Starting Update UTMP about System Runlevel Changes...
- No. Switching to ondemand scaling governor.
- Started LSB: Switch to ondemand cpu governor (unless shift key is pressed).
- Started Update UTMP about System Runlevel Changes.
- setterm: $TERM is not defined.
- Started LSB: Prepare console.
- Starting LSB: Set console font and keymap...
- Setting up console font and keymap...done.
- Started LSB: Set console font and keymap.
- Internet Systems Consortium DHCP Client 4.3.1
- Copyright 2004-2014 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
- Copyright 2004-2014 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Listening on LPF/eth0/b8:27:eb:cb:39:80
- Sending on LPF/eth0/b8:27:eb:cb:39:80
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- Listening on LPF/eth0/b8:27:eb:cb:39:80
- Sending on LPF/eth0/b8:27:eb:cb:39:80
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- Received SIGRTMIN+21 from PID 268 (plymouthd).
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- done.
- Started LSB: Raise network interfaces..
- Starting ifup for eth0...
- Started ifup for eth0.
- Starting Network.
- Reached target Network.
- Starting Network is Online.
- Reached target Network is Online.
- Startup finished in 1.840s (kernel) + 2min 33.018s (userspace) = 2min 34.858s.
- /sbin/ifup: interface eth0 already configured
- usb 1-1.2: new low-speed USB device number 6 using dwc_otg
- usb 1-1.2: New USB device found, idVendor=046d, idProduct=c31c
- usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.2: Product: USB Keyboard
- usb 1-1.2: Manufacturer: Logitech
- input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31C.0003/input/input2
- hid-generic 0003:046D:C31C.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input0
- input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0004/input/input3
- hid-generic 0003:046D:C31C.0004: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input1
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- usb 1-1.5: new high-speed USB device number 7 using dwc_otg
- usb 1-1.5: New USB device found, idVendor=090c, idProduct=1000
- usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1.5: Product: Flash Voyager
- usb 1-1.5: Manufacturer: Corsair
- usb 1-1.5: SerialNumber: Aa00000000025684
- usb-storage 1-1.5:1.0: USB Mass Storage device detected
- scsi host1: usb-storage 1-1.5:1.0
- scsi 1:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 1:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
- sd 1:0:0:0: [sdb] No Caching mode page found
- sd 1:0:0:0: [sdb] Assuming drive cache: write through
- sdb: sdb1 sdb2
- sd 1:0:0:0: [sdb] Attached SCSI removable disk
- usb 1-1.5: USB disconnect, device number 7
- usb 1-1.5: new high-speed USB device number 8 using dwc_otg
- usb 1-1.5: New USB device found, idVendor=058f, idProduct=6387
- usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1.5: Product: Mass Storage
- usb 1-1.5: Manufacturer: Generic
- usb 1-1.5: SerialNumber: 21A1C882
- usb-storage 1-1.5:1.0: USB Mass Storage device detected
- scsi host1: usb-storage 1-1.5:1.0
- scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 1:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
- sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- sdb: sdb1 sdb2
- sd 1:0:0:0: [sdb] Attached SCSI removable disk
- usb 1-1.5: USB disconnect, device number 8
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
- Starting Activation of LVM2 logical volumes...
- 1 logical volume(s) in volume group "serverdata" now active
- Found device /dev/mapper/serverdata-web_data.
- Found device /dev/disk/by-uuid/1aa94aba-f38a-410b-bb74-77bfb80c0dbd.
- Found device /dev/disk/by-id/dm-uuid-LVM-1N7q3OFOAmEpsk1E44JdB3dfEu306LlibBbq1WR0Qc702GDmpjdaApoW8taxqPM4.
- Found device /dev/disk/by-id/dm-name-serverdata-web_data.
- Found device /dev/dm-0.
- Found device /sys/devices/virtual/block/dm-0.
- Started Activation of LVM2 logical volumes.
- Mounting /data...
- data.mount: Directory /data to mount over is not empty, mounting anyway.
- Mounted /data.
- EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement