Advertisement
Guest User

Untitled

a guest
Apr 7th, 2013
115
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.60 KB | None | 0 0
  1. CARGA OPENWRT --------------------------------------------------------- mazingerz
  2. ROM VER: 1.0.3
  3. CFG 01
  4. Readü
  5. ROM VER: 1.0.3
  6. CFG 01
  7. Read EEPROMX
  8. X
  9.  
  10.  
  11. U-Boot 2010.03 (May 16 2012 - 05:51:08)
  12.  
  13. Board: ARV4518PW
  14. SoC: Danube/Twinpass/Vinax-VE V1.5, DDR Speed 166 MHz, CPU Speed 333 MHz
  15. DRAM: 64 MB
  16. Flash: 4 MB
  17. Net:
  18. searching for rtl8306 switch ... found
  19. lq_cpe_eth
  20. Hit any key to stop autoboot: 0
  21. ARV4518 => setenv kernel_addr 0xb0030000
  22. ARV4518 => saveenv
  23. Saving Environment to Flash...
  24. Un-Protected 1 sectors
  25. Erasing Flash...
  26. . done
  27. Erased 1 sectors
  28. Writing to Flash... 9....8....7....6....5....4....3....2....1....done
  29. Protected 1 sectors
  30. ARV4518 => run update_openwrt
  31. Using lq_cpe_eth device
  32. TFTP from server 192.168.144.100; our IP address is 192.168.144.99
  33. Filename 'ARV4518PW-squashfs.image'.
  34. Load address: 0x80500000
  35. Loading: #################################################################
  36. #################################################################
  37. #################################################################
  38. #################################################################
  39. ########
  40. done
  41. Bytes transferred = 3932164 (3c0004 hex)
  42.  
  43. ............................................................. done
  44. Erased 61 sectors
  45. Copy to Flash... 9....8....7....6....5....4....3....2....1....done
  46. ARV4518 =>
  47.  
  48. CARGADO OPENWRT --------------------------------------------------------- mazingerz
  49.  
  50. =====================================================================================================
  51.  
  52. ARRANQUE OPENWRT --------------------------------------------------------- mazingerz
  53.  
  54. ROM VER: 1.0.3
  55. CFG 01
  56. Readü
  57. ROM VER: 1.0.3
  58. CFG 01
  59. Read EEPROMX
  60. X
  61.  
  62.  
  63. U-Boot 2010.03 (May 16 2012 - 05:51:08)
  64.  
  65. Board: ARV4518PW
  66. SoC: Danube/Twinpass/Vinax-VE V1.5, DDR Speed 166 MHz, CPU Speed 333 MHz
  67. DRAM: 64 MB
  68. Flash: 4 MB
  69. Net:
  70. searching for rtl8306 switch ... found
  71. lq_cpe_eth
  72. Hit any key to stop autoboot: 0
  73. ## Booting kernel from Legacy Image at b0030000 ...
  74. Image Name: MIPS OpenWrt Linux-3.7.9
  75. Created: 2013-04-06 14:18:25 UTC
  76. Image Type: MIPS Linux Kernel Image (lzma compressed)
  77. Data Size: 1105453 Bytes = 1.1 MB
  78. Load Address: 80002000
  79. Entry Point: 80002000
  80. Verifying Checksum ... OK
  81. Uncompressing Kernel Image ... OK
  82.  
  83. Starting kernel ...
  84.  
  85. [ 0.000000] Linux version 3.7.9 (berto@debian) (gcc version 4.6.4 (OpenWrt/Li
  86. naro GCC 4.6-2012.12 r36213) ) #1 Sat Apr 6 16:18:14 CEST 2013
  87. [ 0.000000] SoC: Danube rev 1.5
  88. [ 0.000000] bootconsole [early0] enabled
  89. [ 0.000000] CPU revision is: 00019641 (MIPS 24KEc)
  90. [ 0.000000] Board: ARV4518PWR01A - SMC7908A-ISP, Airties WAV-221
  91. [ 0.000000] Determined physical RAM map:
  92. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  93. [ 0.000000] Initrd not found or empty - disabling initrd
  94. [ 0.000000] Zone ranges:
  95. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  96. [ 0.000000] Movable zone start for each node
  97. [ 0.000000] Early memory node ranges
  98. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  99. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  100. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 byt
  101. es
  102. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
  103. es: 16256
  104. [ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
  105. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  106. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  107. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  108. [ 0.000000] __ex_table already sorted, skipping sort
  109. [ 0.000000] Writing ErrCtl register=00017d68
  110. [ 0.000000] Readback ErrCtl register=00017d68
  111. [ 0.000000] Memory: 61384k/65536k available (2519k kernel code, 4152k reserve
  112. d, 604k data, 196k init, 0k highmem)
  113. [ 0.000000] NR_IRQS:256
  114. [ 0.000000] CPU Clock: 333MHz
  115. [ 0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  116. [ 0.036000] pid_max: default: 32768 minimum: 301
  117. [ 0.040000] Mount-cache hash table entries: 512
  118. [ 0.044000] pinctrl core: initialized pinctrl subsystem
  119. [ 0.048000] NET: Registered protocol family 16
  120. [ 0.068000] pinctrl-xway 1e100b10.pinmux: Init done
  121. [ 0.072000] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels:
  122. 20
  123. [ 0.084000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
  124. [ 0.088000] MEM 0x0000000018000000..0x0000000019ffffff
  125. [ 0.092000] IO 0x000000001ae00000..0x000000001affffff
  126. [ 0.116000] bio: create slab <bio-0> at 0
  127. [ 0.124000] usbcore: registered new interface driver usbfs
  128. [ 0.128000] usbcore: registered new interface driver hub
  129. [ 0.132000] usbcore: registered new device driver usb
  130. [ 0.136000] PCI host bridge to bus 0000:00
  131. [ 0.140000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  132. [ 0.144000] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff]
  133. [ 0.148000] pci_bus 0000:00: No busn resource found for root bus, will use [b
  134. us 00-ff]
  135. [ 0.152000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
  136. [ 0.156000] pci 0000:00:0e.0: SLOT:14 PIN:1 IRQ:30
  137. [ 0.160000] Switching to clocksource MIPS
  138. [ 0.168000] NET: Registered protocol family 2
  139. [ 0.176000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  140. [ 0.184000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  141. [ 0.188000] TCP: Hash tables configured (established 2048 bind 2048)
  142. [ 0.196000] TCP: reno registered
  143. [ 0.200000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  144. [ 0.204000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  145. [ 0.212000] NET: Registered protocol family 1
  146. [ 0.216000] gptu: totally 6 16-bit timers/counters
  147. [ 0.220000] gptu: misc_register on minor 63
  148. [ 0.224000] gptu: succeeded to request irq 126
  149. [ 0.228000] gptu: succeeded to request irq 127
  150. [ 0.236000] gptu: succeeded to request irq 128
  151. [ 0.240000] gptu: succeeded to request irq 129
  152. [ 0.244000] gptu: succeeded to request irq 130
  153. [ 0.248000] gptu: succeeded to request irq 131
  154. [ 0.260000] lantiq,vmmc 1f103000.vmmc: requested GPIO 255
  155. [ 0.264000] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03900000
  156. [ 0.272000] ath5k,eeprom 103f0400.ath5k_eep: loaded ath5k eeprom
  157. [ 0.284000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  158. [ 0.292000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
  159. Y) (c) 2001-2006 Red Hat, Inc.
  160. [ 0.300000] msgmni has been set to 119
  161. [ 0.304000] io scheduler noop registered
  162. [ 0.308000] io scheduler deadline registered (default)
  163. [ 0.316000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lant
  164. iq,asc
  165. [ 0.324000] console [ttyLTQ0] enabled, bootconsole disabled
  166. [ 0.324000] console [ttyLTQ0] enabled, bootconsole disabled
  167. [ 0.340000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer
  168. ID 0x0000c2 Chip ID 0x0022a8
  169. [ 0.348000] Amd/Fujitsu Extended Query Table at 0x0040
  170. [ 0.352000] Amd/Fujitsu Extended Query version 1.1.
  171. [ 0.356000] number of CFI chips: 1
  172. [ 0.360000] 4 ofpart partitions found on MTD device ltq_nor
  173. [ 0.364000] Creating 4 MTD partitions on "ltq_nor":
  174. [ 0.368000] 0x000000000000-0x000000010000 : "uboot"
  175. [ 0.376000] 0x000000010000-0x000000020000 : "uboot_env"
  176. [ 0.384000] 0x000000020000-0x0000003f0000 : "linux"
  177. [ 0.436000] no uImage or brnImage or eva found in linux partition
  178. [ 0.440000] Can't split linux partition
  179. [ 0.444000] 0x0000003f0000-0x000000400000 : "boardconfig"
  180. [ 0.464000] etop: invalid MAC, using random
  181. [ 0.480000] libphy: ltq_mii: probed
  182. [ 0.512000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x000
  183. 0
  184. [ 0.520000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=1e180000.etop-ff:
  185. 00, irq=-1)
  186. [ 0.532000] wdt 1f8803f0.watchdog: Init done
  187. [ 0.536000] leds-gpio gpio-leds.5: pins are not configured from the driver
  188. [ 0.552000] TCP: cubic registered
  189. [ 0.552000] NET: Registered protocol family 17
  190. [ 0.556000] 8021q: 802.1Q VLAN Support v1.8
  191. [ 0.564000] VFS: Cannot open root device "(null)" or unknown-block(0,0): erro
  192. r -6
  193. [ 0.572000] Please append a correct "root=" boot option; here are the availab
  194. le partitions:
  195. [ 0.580000] 1f00 64 mtdblock0 (driver?)
  196. [ 0.584000] 1f01 64 mtdblock1 (driver?)
  197. [ 0.588000] 1f02 3904 mtdblock2 (driver?)
  198. [ 0.592000] 1f03 64 mtdblock3 (driver?)
  199. [ 0.600000] Kernel panic - not syncing: VFS: Unable to mount root fs on unkno
  200. wn-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement