miui_audio

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 2.6.35.14-cayniarb+ (cayniarb@prime) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sun Aug 21 02:01:56 EDT 2011

<4>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c53c7f

<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache

<4>[    0.000000] Machine: shooter

<7>[    0.000000] find the memsize tag

<7>[    0.000000] parse_tag_memsize: 1024

<6>[    0.000000] board_find_mem_settings: 1024 MB settings is found.

<6>[    0.000000] msm_fixup: mem size = 1024

<7>[    0.000000] find the engineer tag

<7>[    0.000000] parse_tag_engineerid: 0x3

<7>[    0.000000] find the skuid tag

<7>[    0.000000] parse_tag_skuid: hwid = 0x28a01

<7>[    0.000000] tag_panel_parsing: panel type = 9699366

<7>[    0.000000] find the engineer tag

<7>[    0.000000] parse_tag_engineerid: 0x3

<7>[    0.000000] tag_ps_parsing: PS type = 0x2

<6>[    0.000000] CAM_AWB_CAL Data size = 1026 , 0x59504550, size = 4096

<4>[    0.000000] Ignoring unrecognised tag 0x41387898

<6>[    0.000000] BT Data size= 4, 0x43294329,

<6>[    0.000000] d8,

<6>[    0.000000] b3,

<6>[    0.000000] 77,

<6>[    0.000000] 65,

<6>[    0.000000] 04,

<6>[    0.000000] a5,

<6>[    0.000000] 00,

<6>[    0.000000] 00,

<6>[    0.000000] parse_tag_ps_calibration: ps_kparam1 = 0x50530f21, ps_kparam2 = 0xa021012

<7>[    0.000000] parse_tag_gs_calibration: gs_kvalue = 0x0

<7>[    0.000000] find the memsize tag

<7>[    0.000000] parse_tag_memsize: 1024

<7>[    0.000000] csa_kvalue1 = 0x0, csa_kvalue2 = 0x0, csa_kvalue3 = 0x0

<7>[    0.000000] gyro_gs data

<7>[    0.000000] [0]:0x67

<7>[    0.000000] [1]:0x0

<7>[    0.000000] [2]:0x0

<7>[    0.000000] [3]:0x0

<7>[    0.000000] [4]:0x24

<7>[    0.000000] [5]:0x0

<7>[    0.000000] [6]:0x5

<7>[    0.000000] [7]:0xcb

<7>[    0.000000] [8]:0xc3

<7>[    0.000000] [9]:0x0

<7>[    0.000000] [10]:0x2

<7>[    0.000000] [11]:0x18

<7>[    0.000000] [12]:0xe8

<7>[    0.000000] [13]:0x0

<7>[    0.000000] [14]:0x3

<7>[    0.000000] [15]:0x3e

<7>[    0.000000] [16]:0xa6

<7>[    0.000000] [17]:0xff

<7>[    0.000000] [18]:0xff

<7>[    0.000000] [19]:0x7d

<7>[    0.000000] [20]:0xaa

<7>[    0.000000] [21]:0x0

<7>[    0.000000] [22]:0x0

<7>[    0.000000] [23]:0x0

<7>[    0.000000] [24]:0x1c

<7>[    0.000000] [25]:0x0

<7>[    0.000000] [26]:0x0

<7>[    0.000000] [27]:0x0

<7>[    0.000000] [28]:0xac

<7>[    0.000000] [29]:0x0

<7>[    0.000000] [30]:0x0

<7>[    0.000000] [31]:0x0

<7>[    0.000000] [32]:0xac

<7>[    0.000000] [33]:0xbb

<7>[    0.000000] [34]:0x2e

<7>[    0.000000] [35]:0xa8

<7>[    0.000000] [36]:0x35Memory policy: ECC disabled, Data cache writealloc

<7>[    0.000000] On node 0 totalpages: 240128

<7>[    0.000000] free_area_init_node: node 0, pgdat c080e5a0, node_mem_map c1026000

<7>[    0.000000]   Normal zone: 832 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 84672 pages, LIFO batch:15

<7>[    0.000000]   HighMem zone: 1208 pages used for memmap

<7>[    0.000000]   HighMem zone: 153416 pages, LIFO batch:31

<6>[    0.000000] allocating 9392128 bytes at c182c000 (41c2c000 physical) for fb

<6>[    0.000000] allocating 5242880 bytes at c2121000 (42521000 physical) foroverlay write back

<6>[    0.000000] allocating 6291456 bytes at c7d00000 (48100000 physical) for kernel ebi1 pmem arena

<6>[    0.000000] allocating 3145728 bytes at 38000000 physical for kernel smi pmem arena

<6>[    0.000000] allocating 33554432 bytes at c8300000 (48700000 physical) for adsp pmem arena

<6>[    0.000000] allocating 63963136 bytes at 38300000 physical for user smi  pmem arena

<6>[    0.000000] allocating 2330624 bytes at ca300000 (4a700000 physical) for audio pmem arena

<6>[    0.000000] allocating 67108864 bytes at ca539000 (4a939000 physical) for sf pmem arena

<6>[    0.000000] allocating 65536 bytes at 403d0000 physical for user smi  pmem arena

<6>[    0.000000] allocating 65536 bytes at 403d0000 physical for user smi  pmem arena

<6>[    0.000000] allocating 65536 bytes at 403d0000 physical for user smi  pmem arena

<6>[    0.000000] allocating 65536 bytes at 403d0000 physical for user smi  pmem arena

<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @ce53e000 s7936 r8192 d12544 u65536

<6>[    0.000000] pcpu-alloc: s7936 r8192 d12544 u65536 alloc=16*4096

<6>[    0.000000] pcpu-alloc: [0] 0 [0] 1

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 238088

<5>[    0.000000] Kernel command line: poweron_status=1 board_shooter.disable_uart3=0 diag.enabled=0 board_shooter.debug_uart=0 userdata_sel=0 androidboot.emmc=true androidboot.pagesize=2048  androidboot.baseband=0.97.00.0518 androidboot.cid=SPCS_001 androidboot.batt_poweron=good_battery androidboot.carrier=COMMON androidboot.mid=PG8610000 androidboot.keycaps=qwerty androidboot.dq=PASS androidboot.mode=normal androidboot.serialno=HT16AHX19726 androidboot.bootloader=1.04.2000 zygote_oneshot=on msm_watchdog.enable=1 no_console_suspend=1

<6>[    0.000000] [USBDIAG] diag_set_enabled: 0

<6>[    0.000000] board_bootloader_setup: 1.04.2000

<6>[    0.000000] board_bootloader_setup: ENG BUILD

<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Memory: 42MB 292MB 604MB = 938MB total

<5>[    0.000000] Memory: 821792k/821792k available, 138720k reserved, 618496K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)

<5>[    0.000000]     vmalloc : 0xda800000 - 0xfa000000   ( 504 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xda000000   ( 416 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .init : 0xc0008000 - 0xc003b000   ( 204 kB)

<5>[    0.000000]       .text : 0xc003b000 - 0xc0790000   (7508 kB)

<5>[    0.000000]       .data : 0xc0790000 - 0xc080f040   ( 509 kB)

<6>[    0.000000] Hierarchical RCU implementation.

<6>[    0.000000]   RCU-based detection of stalled CPUs is disabled.

<6>[    0.000000]   Verbose stalled-CPUs detection is disabled.

<6>[    0.000000] NR_IRQS:855

<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms

<6>[    0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67669)

<6>[    0.150238] pid_max: default: 32768 minimum: 301

<4>[    0.151031] Mount-cache hash table entries: 512

<6>[    0.152923] Initializing cgroup subsys cpuacct

<6>[    0.152984] Initializing cgroup subsys freezer

<6>[    0.153167] CPU: Testing write buffer coherency: ok

<4>[    0.273956] CPU1: Booted secondary processor

<6>[    0.293640] Brought up 2 CPUs

<6>[    0.293670] SMP: Total of 2 processors activated (27.06 BogoMIPS).

<6>[    0.328155] regulator: core version 0.5

<6>[    0.329406] NET: Registered protocol family 16

<3>[    0.330657] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

<6>[    0.371704] msm_ssbi_init()

<6>[    0.375823] msm_rpm_init: RPM firmware 2.0.3909.8

<6>[    0.375915] MPM_SLEEP_TICK: 8243ms

<3>[    0.376403] shooter_init, system_rev = 2

<6>[    0.376434] cur_cpu 0x8, id 0x47

<6>[    0.376464] socinfo_init: v5, id=71, ver=2.0, raw_id=1329, raw_ver=1329, hw_plat=0,  hw_plat_ver=65538

<6>[    0.376464]  accessory_chip=0

<6>[    0.377716] saw_probe: id=0, rc=0

<6>[    0.378845] saw_probe: id=1, rc=0

<6>[    0.382385] YoYo--BD_ADDRESS=d8:b3:77:65:04:a5

<6>[    0.401184] CPU0: 33 scaling frequencies supported.

<6>[    0.401184] CPU1: 33 scaling frequencies supported.

<6>[    0.402282] shooter: shooter_init_mmc

<6>[    0.405242] [HS_BOARD] (shooter_init) system_rev = 2, engineerid = 3

<6>[    0.405242] [HS_BOARD] (shooter_init) Set MEMS config

<6>[    0.405548] ram_console: got buffer at 40300000, size d0000

<6>[    0.405731] ram_console: error in header, 6

<6>[    0.405731] ram_console: found existing buffer, size 65823, start 65823

<6>[    0.643005] console [ram0] enabled

<6>[    0.646759] msm_ssbi: io=00500000

<6>[    0.647186] msm_ssbi: io=00c00000

<6>[    0.647705] msm_ssbi: io=18700000

<6>[    0.699615] [DISP]shooter_init_panel: mipi_novatek

<6>[    0.700347] panel ID= 0x940026

<3>[    0.701446] register_i2c_devices: i = 0

<3>[    0.701538] s5k6aafx

<3>[    0.701629] register_i2c_devices: i = 1

<3>[    0.701782] tps65200

<3>[    0.701873] register_i2c_devices: i = 2

<3>[    0.701934] sii9234

<3>[    0.702026] register_i2c_devices: i = 3

<3>[    0.702178] tpa2051d3

<4>[    0.702301] shooter_add_usb_devices

<6>[    0.703674] config_shooter_usb_id_gpios 63 input none pull

<6>[    0.703826] [CABLE] shooter_mhl_usb_switch, mhl 0, polarity 1

<7>[    0.703918] [DISP]sii9234_change_usb_owner(0)

<3>[    0.712585] [AUD] board_msm8x60_audio: msm_snddev_init: spkr pamp gpio 229 requestfailed

<6>[    0.712677] [AUD] board_shooter_audio: shooter_audio_init

<7>[    0.713836] shooter_init_keypad

<6>[    0.714630] shooter_wifi_init: start

<6>[    0.735290] Create /proc/emmc OK.

<6>[    0.735473] Create /proc/gpio_info OK.

<6>[    0.735565] Create /proc/ddr_regs OK.

<6>[    0.736297] SCM Remote Version 1.0

<6>[    0.736877] TZ_HTC_SVC_GET_SECURITY_LEVEL ret = 16

<6>[    0.736968] TZ_HTC_SVC_GET_SECURITY_LEVEL modified ret = 0

<6>[    0.738616] Scorpion registered PMU device

<6>[    0.738769] pm8058_init()

<6>[    0.738983] pm8058_probe: PMIC revision: E3

<6>[    0.745117] pm8901_init()

<6>[    0.745391] pm8901_probe: PMIC revision: F4

<6>[    0.747924] gsbi_qup_i2c_gpio_config(): adap_id = 1, config_type = 1

<6>[    0.749267] gsbi_qup_i2c_gpio_config(): adap_id = 9, config_type = 1

<6>[    0.750122] gsbi_qup_i2c_gpio_config(): adap_id = 4, config_type = 1

<6>[    0.751708] gsbi_qup_i2c_gpio_config(): adap_id = 5, config_type = 1

<6>[    0.759338] pm8058_gpio_probe: gpiochip_add(): rc=0

<6>[    0.760528] pm8058_mpp_probe: gpiochip_add(): rc=0

<4>[    0.792236] bio: create slab <bio-0> at 0

<6>[    0.793579] pm8901_mpp_probe: gpiochip_add(): rc=0

<5>[    0.796600] pmic8058_pwm_probe: OK

<6>[    0.797576] usbcore: registered new interface driver usbfs

<6>[    0.798248] usbcore: registered new interface driver hub

<6>[    0.798736] usbcore: registered new device driver usb

<6>[    0.801605] Advanced Linux Sound Architecture Driver Version 1.0.23.

<6>[    0.803466] Bluetooth: Core ver 2.15

<6>[    0.803802] NET: Registered protocol family 31

<6>[    0.803955] Bluetooth: HCI device and connection manager initialized

<6>[    0.804046] Bluetooth: HCI socket layer initialized

<6>[    0.804870] Switching to clocksource gp_timer

<7>[    0.827514] [TTY_IO] create tty_wq for smd0

<5>[    0.829681] pm8058_batt_alarm_probe: OK

<6>[    0.830200] [BATT][tps65200] for battery driver 8x60.

<6>[    0.830291] [BATT][tps65200] HV battery is detected.

<6>[    0.830688] [BATT][tps65200] init chg_int interrupt.

<6>[    0.830780] [BATT][tps65200] [TPS65200]: Driver registration done

<6>[    0.832275] msm_adc successfully registered

<6>[    0.847991] NET: Registered protocol family 2

<6>[    0.848358] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)

<6>[    0.849334] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.850402] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

<6>[    0.851501] TCP: Hash tables configured (established 65536 bind 65536)

<6>[    0.851654] TCP reno registered

<6>[    0.851745] UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.851898] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.852416] NET: Registered protocol family 1

<6>[    0.856506] Unpacking initramfs...

<6>[    0.882141] Freeing initrd memory: 148K

<6>[    0.882995] PMU: registered new PMU device of type 0

<6>[    0.884643] simlock_init: register module ok

<6>[    0.884887] address 403e0000

<6>[    0.885589] TZ_HTC_SVC_LOG_OPERATOR ret = 0

<6>[    0.885742] > [4]HAL_XPU_SYS_IMEM,vmid=2,a=2a030510 <


<6>[    0.885742]

<6>[    0.885925] > [5]HAL_XPU_SYS_IMEM,vmid=2,a=2a035350 <


<6>[    0.885925]

<6>[    0.886138] > [6]HAL_XPU_SYS_IMEM,vmid=2,a=2a035350 <


<6>[    0.886169]

<6>[    0.886383] > [7]HAL_XPU_SYS_IMEM,vmid=2,a=2a035350 <


<6>[    0.886383]

<6>[    0.886566] > [8]HAL_XPU_SYS_IMEM,vmid=2,a=2a0353a0 <


<6>[    0.886566]

<6>[    0.886932] TZ_HTC_SVC_LOG_OPERATOR ret = 0

<6>[    0.887420] msm_dsps driver version 1.01.

<6>[    0.889007] [SMD] smd probe

<6>[    0.889160] [SMD] smd_core_init()

<6>[    0.889404] [SMD] smd_core_init() done

<6>[    0.889526] [SMD] smd_alloc_loopback_channel: 'local_loopback' cid=100

<6>[    0.908050] [AUD] snddev_icodec: snddev_icodec_probe: support_aic3254 = 1

<6>[    0.908142] [AUD] snddev_icodec: snddev_icodec_probe: support_adie = 0

<6>[    0.908294] [AUD] snddev_icodec: snddev_icodec_probe: msm_codec_i2s_slave_mode = 1

<6>[    0.908447] [AUD] snddev_icodec: snddev_icodec_probe: support_aic3254_use_mclk = 0

<6>[    0.909973] [AUD] snddev_ecodec: snddev_ecodec_init:

<6>[    0.910278] [AUD] snddev_ecodec: aux_pcm_probe:

<6>[    0.910339] [AUD] snddev_ecodec: get_aux_pcm_gpios: dout = 111, din = 112 , syncout = 113, clkin_a =114

<6>[    0.911010] [AUD] snddev_ecodec: snddev_ecodec_probe:

<6>[    0.911132] [AUD] snddev_ecodec: snddev_ecodec_probe:

<6>[    0.911560] [AUD] snddev_ecodec: snddev_ecodec_init: done

<6>[    0.912231] [AUD] snddev_mi2s: snddev_mi2s_probe: probe done for fmradio_stereo_tx

<6>[    0.912414] [AUD] snddev_mi2s: snddev_mi2s_probe: probe done for fmradio_stereo_rx

<6>[    0.912841] [AUD] snddev_mi2s: snddev_mi2s_init : done

<6>[    0.912933] [AUD] apr: apr_probe

<6>[    0.914184] [AUD] audio_acdb: acdb_init

<6>[    0.914672] [AUD] q6adm: adm_init

<6>[    0.914733] [AUD] q6afe: afe_init:

<6>[    0.916381] [AUD] q6voice: voice_init

<6>[    0.920318] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier

<6>[    0.920379] [HS_MGR] (headset_notifier_update) HS_MGR driver is not ready

<7>[    0.920623] htc_sleep_clk_probe, pin=37

<7>[    0.921173] htc_wifi_bt_sleep_clk_ctl ON=1, ID=1

<7>[    0.921325] EN SLEEP CLK

<7>[    0.921447] htc_wifi_bt_sleep_clk_ctl ON=1, ID=1 DONE

<6>[    0.928314] shooter_3Dpanel_init(1272)

<6>[    0.928558] shooter_3Dpanel_probe

<7>[    0.929382] Registered led device: flashlight

<6>[    0.929473] [FLT]flashlight_probe: led_count = 0

<6>[    0.929626] [FLT]flashlight_probe: The Flashlight Driver is ready

<6>[    0.937652] pmic8058_xoadc:The offset for AMUX calibrationwas -643

<6>[    0.948944] [BATT] vref ADC: 18602 18602 18602 18602 18602 at 883988741 (1970-01-01 00:00:00.883897252 UTC)

<6>[    0.999176] [BATT] htc_battery_probe(): finish at 934188114 (1970-01-01 00:00:00.934096616 UTC)

<6>[    1.001037] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++

<6>[    1.038635] input: h2w headset as /devices/virtual/input/input0

<6>[    1.040252] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready

<6>[    1.040863] [HS_MGR] (htc_headset_mgr_probe) --------------------

<6>[    1.041992] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++

<6>[    1.077880] [HS_MGR] (headset_notifier_register) Register KEY_ENABLE notifier

<6>[    1.078033] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready

<6>[    1.078552] [HS_PMIC] (htc_headset_pmic_probe) --------------------

<6>[    1.079193] [HS_8X60] (htc_headset_8x60_probe) ++++++++++++++++++++

<6>[    1.097686] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier

<6>[    1.097839] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier

<6>[    1.097991] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier

<6>[    1.098083] [HS_MGR] (hs_notify_driver_ready) HS_8X60 ready

<6>[    1.098693] [HS_GPIO] (htc_headset_gpio_probe) ++++++++++++++++++++

<6>[    1.137878] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier

<6>[    1.138031] [HS_MGR] (hs_notify_driver_ready) HS_GPIO ready

<6>[    1.138122] [HS_GPIO] (htc_headset_gpio_probe) --------------------

<6>[    1.138275] [HS_8X60] (htc_headset_8x60_probe) --------------------

<5>[    1.139221] msm_rpm_log_probe: OK

<4>[    1.151519] highmem bounce pool size: 64 pages

<6>[    1.152099] ashmem: initialized

<5>[    1.199340] Slow work thread pool: Starting up

<5>[    1.199707] Slow work thread pool: Ready

<6>[    1.199798] fuse init (API version 7.14)

<6>[    1.208435] alg: No test for stdrng (krng)

<6>[    1.208587] io scheduler noop registered

<6>[    1.208679] io scheduler deadline registered

<6>[    1.209869] io scheduler cfq registered

<6>[    1.209960] io scheduler sio registered (default)

<6>[    1.210876] msm_fb_probe:  phy_Addr = 0x41c2c000 virt = 0xdb000000

<6>[    1.212158] MDP HW Base phy_Address = 0x5100000 virt = 0xdaa00000

<6>[    1.212402] mdp_clk: mdp_clk=200000000

<6>[    1.216674] mdp4_fetch_cfg: dmap=47 vg=47

<6>[    1.216918] [DISP]shooter_mdp_color_enhance

<6>[    1.217071] [DISP]shooter_mdp_gamma

<6>[    1.221710] mipi_dsi base phy_addr = 0x4700000 virt = 0xdab00000

<6>[    1.221801] msm_mmss_cc base = 0xfa014000

<6>[    1.221984] mmss_sfpb  base phy_addr = 0x5700000 virt = 0xda88c000

<6>[    1.222106] mipi_dsi_probe: vsync_gpio=28

<6>[    1.222564] Daniel:mipi_himax_lcd_init

<6>[    1.224548] panel: mipi_cmd_novatek_qhd

<6>[    1.226348] mdp4_display_intf_sel: 0x8a

<6>[    1.227294] msm_fb_probe: blt_mode=1

<6>[    1.230682] FrameBuffer[0] 540x960 size=4177920 bytes is registered successfully!

<7>[    1.231536] Registered led device: lcd-backlight

<6>[    1.231658] mipi_dsi_on+, isr=0x02020303

<6>[    1.231781] mipi_dsi_ahb_en: ahb=fa014008 91840603

<6>[    1.232971] shooter_panel_power(106): init=0 onoff=1 panel_type=0x940026

<6>[    1.235076] mipi_novatek_panel_type_detect: panel_type=PANEL_ID_SHR_SHARP_NT

<4>[    1.235260] [DISP]mipi_dsi_enable_irq: IRQ aleady enabled

<6>[    1.238494] mipi_dsi_on-

<6>[    1.238616] mipi_dsi_read_status_reg

<6>[    1.238708] [MIPI] DSI_DLN0_PHY_ERR: curr=0x00088888, last=0x00000000

<6>[    1.238861] [MIPI] DSI_FIFO_STATUS: curr=0x11111000, last=0x00000000

<4>[    1.238952] msm_fb_detect_panel: not supported 'mipi_cmd_novatek_wvga'

<4>[    1.239105] msm_fb_detect_panel: not supported 'mipi_cmd_himax_720p'

<4>[    1.239257] msm_fb_detect_panel: not supported 'mipi_cmd_renesas_wvga'

<4>[    1.239501] msm_fb_detect_panel: not supported 'mipi_cmd_orise_qhd'

<4>[    1.240203] msm_fb_detect_panel: not supported 'lcdc_samsung_wsvga'

<4>[    1.240417] msm_fb_detect_panel: not supported 'lcdc_auo_wxga'lcdc_auo_panel_init

<4>[    1.240661] msm_fb_detect_panel: not supported 'lcdc_auo_wvga'

<6>[    1.241210] HDMI: probe

<6>[    1.242340] HDMI: probe

<6>[    1.242523] HDMI: Features <val:0x80004481, HDMI:ON, HDCP:ON>

<6>[    1.244110] mdp4_display_intf_sel: 0x8a

<6>[    1.247985] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!

<3>[    1.248626] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group d966a008

<6>[    1.248992] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)

<6>[    1.249084] hdmi_msm hdmi_msm.1: HDMI HPD: ON

<6>[    1.249237] HDMI: HDMI Clk: Enable

<6>[    1.249359] hdmi_core_power(on): success

<6>[    1.249481] hdmi_enable_5v(on): success

<6>[    1.249633] HDMI: HDMI Core: Disable

<6>[    1.249725] HDMI: hdmi_msm_hpd_on: (clk, 5V, core, IRQ on) <trigger:true>

<6>[    1.249877] HDMI: HDMI Core: Enable

<6>[    1.249969] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0

<6>[    1.251007] HDMI: HDMI Core: Disable

<6>[    1.251098] HDMI: HDMI Core: Enable

<6>[    1.251953] [VID] msm_vidc_dec: Inside vid_dec_init()

<6>[    1.253784] [VID] msm_vidc_dec: Inside vid_dec_vcd_init()

<6>[    1.254302] [VID] msm_vidc_enc: Inside vid_enc_init()

<6>[    1.256134] [VID] msm_vidc_enc: Inside vid_enc_vcd_init()

<3>[    1.256317]

<3>[    1.256317]  err: Device config mismatch

<6>[    1.258636] mhl_sii9234_all_power(on): success

<3>[    1.258789] pm8901_mpp_init

<7>[    1.258911] [DISP]MhlTx: SiiMhlTxInitialize

<7>[    1.261444] [DISP]Drv: SiiMhlTxChipInitialize: 9244

<7>[    1.262664] [DISP]SiI 9234

<7>[    1.262756] [DISP]Drv: WriteInitialRegisterValues

<7>[    1.272064] [DISP]Drv: MHL 1.0 Compliant Clock

<7>[    1.305084] [DISP]Drv: InitCBusRegs

<7>[    1.316528] [DISP]Drv: Switch To D3: pinAllowD3 = 1

<6>[    1.374755] sii9234_probe: Probe success!

<6>[    1.375701] [USBDIAG] diagchar_init:swapper(parent:swapper): tgid=1

<6>[    1.375885] [USBDIAG] diagchar initializing ..

<7>[    1.378112] [USBDIAG] usb_diag_open:

<6>[    1.379394] [USBDIAG] diagchar initialized

<6>[    1.381195] msm_serial_hs module loaded

<6>[    1.381744] [BT]msm_serial_hs module loaded

<6>[    1.382507] [BT]msm_serial_hs module loaded

<6>[    1.383300] [BT]msm_serial_hs module loaded

<6>[    1.383697] [BT]BRCM chip

<6>[    1.383911] msm_serial_hs_brcm.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART

<6>[    1.384857] [BT]msm_serial_hs module loaded

<6>[    1.385131] msm_serial_hsl: detected port #0

<6>[    1.385406] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM

<6>[    1.386199] msm_serial_hsl: driver initialized

<6>[    1.394592] loop: module loaded

<6>[    1.394958] pmem: Initializing pmem_kernel_ebi1 (in-kernel)

<6>[    1.395263] pmem: Initializing pmem_kernel_smi (in-kernel)

<6>[    1.395446] pmem: Initializing pmem (user-space) as cached

<6>[    1.396911] pmem: Initializing pmem_adsp (user-space) as non-cached

<6>[    1.397888] pmem: Initializing pmem_audio (user-space) as non-cached

<6>[    1.398620] pmem: Initializing pmem_smipool (user-space) as non-cached

<6>[    1.399932] pmem: Initializing pmem_ciq (user-space) as non-cached

<6>[    1.400604] pmem: Initializing pmem_ciq1 (user-space) as non-cached

<6>[    1.401153] pmem: Initializing pmem_ciq2 (user-space) as non-cached

<6>[    1.401824] pmem: Initializing pmem_ciq3 (user-space) as non-cached

<6>[    1.402832] i2c i2c-5: mpu3050: +bma250

<4>[    1.402984] i2c i2c-5: WARNING: Accel irq not assigned

<6>[    1.403076] i2c i2c-5: mpu3050: +ak8975

<4>[    1.403228] i2c i2c-5: WARNING: Compass irq not assigned

<4>[    1.403320] i2c i2c-5: mpu3050: No Pressure Present

<4>[    1.403594] mldl_cfg:Reset MPU3050

<4>[    1.435546] MPL-accODR: 0

<4>[    1.435638] MPL-accODR: 31250

<4>[    1.435729] MPL-accFSR: 2048

<4>[    1.435882] MPL-accFSR: 2048

<6>[    1.436431] i2c i2c-5: Installing irq using 383

<6>[    1.436523] i2c i2c-5: Module Param interface = mpuirq

<7>[    1.438079] mpu_init

<6>[    1.440856] [CABLE] shooter_mhl_usb_switch, mhl 0, polarity 1

<7>[    1.440948] [DISP]sii9234_change_usb_owner(0)

<6>[    1.441101] config_shooter_usb_id_gpios 63 input none pull

<6>[    1.441345] [CABLE] vbus_mpp_gpio: 223

<6>[    1.441986] [CABLE] usb_id_detect_init: id pin 63

<6>[    1.443542] msm_spi_clock_set: 10800000

<6>[    1.445098] msm_spi_clock_set: 15060000

<6>[    1.446838] [AUD] spi_aic3254: spi_aic3254_init

<6>[    1.446990] [AUD] spi_aic3254: spi_aic3254_probe

<6>[    1.536560] PPP generic driver version 2.4.2

<6>[    1.537414] PPP Deflate Compression module registered

<6>[    1.537506] PPP BSD Compression module registered

<6>[    1.539276] PPP MPPE Compression module registered

<6>[    1.539367] NET: Registered protocol family 24

<6>[    1.540679] tun: Universal TUN/TAP device driver, 1.6

<6>[    1.540832] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<6>[    1.541381] [RIL]rmnet_init: SMD devices[8]

<6>[    1.554473] [USBH] msm_otg_probe

<6>[    1.557739] [USBH] msm_otg_probe: success

<6>[    1.558135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.558502] [USBH] ehci_msm_probe

<6>[    1.558624] [USBH] host driver registered w/ tranceiver

<6>[    1.558776] [USBH] ehci_msm_probe: success

<6>[    1.559478] usbcore: registered new interface driver usb_ehset_test

<6>[    1.559814] [USB] msm72k_probe

<6>[    1.561004] [USBH] peripheral driver registered w/ tranceiver

<6>[    1.561126] [USBH] msm_otg_sm_work: state:UNDEFINED bit:0x00000000

<6>[    1.561279] [USBH] otg_reset

<6>[    1.561401] android init

<6>[    1.561767] android_probe pdata: c07cb7c0

<6>[    1.562499] android_bind

<7>[    1.562591] android_bind_config

<6>[    1.562988] android_usb gadget: android_usb ready

<6>[    1.563171] [USB] msm72k_udc: registered gadget driver 'android_usb'

<6>[    1.563568] f_adb init

<6>[    1.563720] android_register_function adb

<6>[    1.563781] f_mass_storage init

<6>[    1.564056] fsg_probe pdev: c07cc078, pdata: c07d4ac4

<6>[    1.564483] android_register_function usb_mass_storage

<6>[    1.564575] f_rndis init

<6>[    1.564666] android_register_function ether

<6>[    1.564819] serial init

<6>[    1.564880] android_register_function serial

<6>[    1.564971] f_ecm init

<6>[    1.565063] android_register_function cdc_ethernet

<7>[    1.565185] [USBDIAG] usb_diag_init:

<6>[    1.565399] android_register_function diag

<4>[    1.565643] android_usb gadget: using random self ethernet address

<4>[    1.565734] android_usb gadget: using random host ethernet address

<6>[    1.567016] usb0: MAC 66:f8:1d:09:84:77

<6>[    1.567108] usb0: HOST MAC 92:72:b1:a7:50:9f

<6>[    1.571746] android_usb gadget: Mass Storage FunctionNumber of LUNs=1

<6>[    1.572784] adb_bind_config

<7>[    1.575408] [USBDIAG] diag_function_add: ret=11

<7>[    1.575561] [USBDIAG] diag_function_add: dev->function.hidden =1

<6>[    1.575927] [USBDIAG] diag_function_bind: dev=diag

<6>[    1.576721] serial_bind_config

<6>[    1.578704] usb: product_id=0xff9

<6>[    1.579772] cy8c_ts_init: enter

<6>[    1.580139] atmel_ts_init():

<6>[    1.580566] shooter_ts_atmel_power: power 1

<6>[    1.646606] Touch: 0x01 0x90 0x4F 0xEE 0xF3 0x00 0x00

<6>[    1.647552] Touch: 0x0D 0x10 0x08 0x00 0x00 0x00 0x00

<6>[    1.666229] Touch: 0x01 0x00 0x4F 0xEE 0xF3 0x00 0x00

<6>[    1.685363] Touch: No more message

<6>[    1.687194] info block: 0x80 0x10 0x20 0xAA 0x14 0x0A 0x11

<6>[    1.688842] Type: 25, Start: 0070, Size: 82, Instance:  0, RD#:  0,  0

<6>[    1.690521] Type: 2C, Start: 00F2, Size:  1, Instance:  0, RD#:  0,  0

<6>[    1.692138] Type: 05, Start: 00F3, Size:  9, Instance:  0, RD#:  0,  0

<6>[    1.693634] Type: 06, Start: 00FC, Size:  6, Instance:  0, RD#:  1,  1

<6>[    1.694824] Type: 26, Start: 0102, Size:  8, Instance:  0, RD#:  0,  0

<6>[    1.696075] Type: 07, Start: 010A, Size:  3, Instance:  0, RD#:  0,  0

<6>[    1.697357] Type: 08, Start: 010D, Size:  A, Instance:  0, RD#:  0,  0

<6>[    1.698547] Type: 09, Start: 0117, Size: 20, Instance:  0, RD#:  8,  2

<6>[    1.700225] Type: 0F, Start: 0137, Size:  B, Instance:  0, RD#:  1,  A

<6>[    1.701843] Type: 12, Start: 0142, Size:  2, Instance:  0, RD#:  0,  0

<6>[    1.703521] Type: 13, Start: 0144, Size: 10, Instance:  0, RD#:  1,  B

<6>[    1.705139] Type: 14, Start: 0154, Size:  C, Instance:  0, RD#:  1,  C

<6>[    1.706817] Type: 16, Start: 0160, Size: 11, Instance:  0, RD#:  1,  D

<6>[    1.708526] Type: 17, Start: 0171, Size:  F, Instance:  0, RD#:  1,  E

<6>[    1.710113] Type: 18, Start: 0180, Size: 13, Instance:  0, RD#:  4,  F

<6>[    1.711364] Type: 19, Start: 0193, Size:  E, Instance:  0, RD#:  1, 13

<6>[    1.712554] Type: 1C, Start: 01A1, Size:  6, Instance:  0, RD#:  1, 14

<6>[    1.726440] finger_type: 2, max finger: 4

<6>[    1.747894] [USBH] otg_reset: mode:0x00000013

<6>[    1.776336] CRC passed: 0x4F 0xEE 0xF3

<6>[    1.777374] input: atmel-touchscreen as /devices/virtual/input/input1

<6>[    1.778198] atmel_qt602240 9-004a: Start touchscreen atmel-touchscreen in interrupt mode

<6>[    1.778564] atmel_224e_ts_init():

<6>[    1.779083] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[    1.780181] [KEY] GPIO Input Driver: Start gpio inputs for shooter-keypad in interrupt mode

<6>[    1.780487] keypad_reprort_keycode: key 1-116, 0 (125) changed to 0

<6>[    1.780578] keypad_reprort_keycode: key 1-115, 1 (104) changed to 0

<6>[    1.780731] keypad_reprort_keycode: key 1-114, 2 (103) changed to 0

<6>[    1.780822] keypad_reprort_keycode: key 1-211, 3 (123) changed to 0

<6>[    1.780975] keypad_reprort_keycode: key 1-212, 4 (115) changed to 0

<6>[    1.781219] [KEY] GPIO Switch Driver: Start gpio switchs for shooter-keypad in interrupt mode

<6>[    1.781890] input: shooter-keypad as /devices/virtual/input/input2

<6>[    1.783386] dummy_keypad_init: dummy_keypad: initial running...

<6>[    1.784088] input: dummy_keypad as /devices/virtual/input/input3

<6>[    1.784851] using input dev h2w headset for key reset

<6>[    1.784973] using input dev shooter-keypad for key reset

<6>[    1.785125] using input dev dummy_keypad for key reset

<6>[    1.787689] using rtc device, pm8058_rtc0, for alarms

<6>[    1.787902] pm8058-rtc pm8058-rtc: rtc core: registered pm8058_rtc0 as rtc0

<6>[    1.788513] [AUD] tpa2051d3: tpa2051d3_init

<6>[    1.789398] [FLT]adp1650 Led Flash driver: init

<6>[    1.790191] [PS][ISL29029] isl29029_probe

<6>[    1.790344] [KEY] switch_reprort_keycode: key 5-14, 0 (64) changed to 1

<6>[    1.791168] input: lightsensor-level as /devices/virtual/input/input4

<6>[    1.792541] input: proximity as /devices/virtual/input/input5

<6>[    1.793304] [LS][ISL29029] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da505d1

<6>[    1.793487] [LS][ISL29029] lightsensor_set_kvalue: als_kadc=0x5d1, als_gadc=0x4e2

<6>[    1.793548] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[0] = 14

<6>[    1.793731] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[1] = 5e

<6>[    1.793884] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[2] = 133

<6>[    1.794036] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[3] = 2bc

<6>[    1.794097] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[4] = 445

<6>[    1.794250] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[5] = 5d1

<6>[    1.794403] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[6] = 921

<6>[    1.794494] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[7] = c70

<6>[    1.794647] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[8] = fbf

<6>[    1.794799] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[9] = fff

<6>[    1.815704] [PS][ISL29029] set_psensor_range: Setting psensor range (0x15, 0x16)

<6>[    1.816009] [PS][ISL29029] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530f21, ps_kparam2 = 0xa021012

<6>[    1.816162] [PS][ISL29029] psensor_set_kvalue: PS calibrated ps_B_val = 0xf, ps_C_val = 0x21, ps_A_val = 0xa, ps_X_val = 0x2, ps_lt = 0x10, ps_ht = 0x12

<6>[    1.816406] [PS][ISL29029] psensor_set_kvalue: PS calibrated  ps_lt = 0x10, ps_ht = 0x12

<6>[    1.816558] [PS][ISL29029] set_psensor_range: Setting psensor range (0x10, 0x12)

<6>[    1.817749] [PS][ISL29029] isl29029_probe: Probe success!

<6>[    1.818847] [CAM]s5k6aafx_vreg_enable camera vreg on

<6>[    1.819000] [Camera]Shooter_s5k6aafx_vreg_on

<6>[    1.819732] [Camera]sensor_power_enable("8058_l3", 2850) == 0

<6>[    1.824890] camera_sensor_power_enable_8901 8901_lvs2

<6>[    1.825347] [Camera]sensor_power_enable("8901_lvs2", 1800) == 0

<6>[    1.830535] camera_sensor_power_enable_8901 8901_lvs3

<6>[    1.831054] [Camera]sensor_power_enable("8901_lvs3", 1800) == 0

<6>[    1.832550] msm_camio_clk_enable clktype:6

<6>[    1.832733] msm_camio_clk_enable clk:0xc07b8b30

<6>[    1.832916] [CAM]s5k6aafx s->node -641565128

<6>[    1.838165] [CAM]s5k6aafx: s5k6aafx_sensor_probe switch clk

<6>[    1.838226] [Camera]Doing clk switch (2nd Cam)

<6>[    1.838317] [CAM]s5k6aafx: MCLK enable clk

<7>[    1.848785] [USBH] otg_reset: handle missing !ID_GND event

<6>[    1.848876] [USBH] is_b_sess_vld: htc_otg_vbus:0, otgsc_bsv:1

<6>[    1.849029] [USBH] OTG_STATE_UNDEFINED: bit:0x00000020

<6>[    1.849121] [USBH] msm_otg_sm_work: state:b_idle bit:0x00000020

<7>[    1.849273] [USBH] entering into lpm

<6>[    1.849365] [USBH] lpm enter

<6>[    1.850250] [USBH] msm_otg_suspend: usb in low power mode

<6>[    1.858581] [CAM]s5k6aafx_i2c_probe s5k6aafx_client->addr 60

<6>[    1.858673] [CAM]s5k6aafx_sensor_read_id

<6>[    1.859497] [CAM]s5k6aafx: model_id = 0x6aa

<6>[    1.859588] [CAM]s5k6aafx_i2c_probe succeeded! s5k6aafx_client->addr 0x3C

<6>[    1.859771] [CAM]s5k6aafx_i2c_probe s5k6aafx_client existed 0x3C

<6>[    1.935455] [CABLE] check_vbus_in: vbus = 0, vbus_in = 1

<6>[    1.935607] [USBH] htc_otg_set_vbus_state: 1

<6>[    1.935729] [CABLE] check_vbus_in: Enable vbus irq

<7>[    1.935821] [USBH] suspend request in state: b_idle

<6>[    1.935974] [USBH] lpm exit

<6>[    1.936798] [USBH] msm_otg_resume: usb exited from low power mode

<6>[    1.936981] [USBH] msm_otg_sm_work: state:b_idle bit:0x00002020

<7>[    1.937042] [USBH] b_sess_vld

<6>[    1.937164] [USB] msm_hsusb_set_vbus_state_internal: 1

<6>[    1.937316] [USB] msm72k_udc: OFFLINE -> ONLINE

<6>[    1.937408] [USB] reset controller

<6>[    1.937530] [USBH] otg_reset

<6>[    2.127990] [USBH] otg_reset: mode:0x00000012

<6>[    2.228271] [USB] ulpi: write 0x06 to 0x36

<6>[    2.228424] [USB] ulpi: write 0x0c to 0x31

<6>[    2.228485] [USB] ulpi: write 0x31 to 0x32

<6>[    2.228576] [USB] ulpi: write 0x01 to 0x0e

<6>[    2.228729] [USB] ulpi: write 0x01 to 0x11

<6>[    2.228820] [USB] usb: notify offline

<6>[    2.229156] [USB] msm72k_pullup_internal: pullup

<6>[    2.232299] [USB] suspend

<6>[    2.232421] [USB] usb_get_max_power: type = 3, maxpow = 0

<6>[    2.247985] [USB] not AC charger

<6>[    2.248168] [USB] send connect type -1

<6>[    2.248229] fsg_set_ums_state: 1

<6>[    2.248321] [CABLE] usb_status_notifier_func: cable_type = 1

<6>[    2.248474] [CABLE] Send to: usb_tp_connected

<6>[    2.248565] Touch: cable change to 1

<6>[    2.250030] [CABLE] Send to: htc_battery_8x60

<6>[    2.250122] [BATT] cable USB at 2184706328 (1970-01-01 00:00:02.184645302 UTC)

<6>[    2.504699] [USB] reset

<6>[    2.504821] [USB] send connect type 1

<6>[    2.504882] fsg_set_ums_state: 1

<6>[    2.504974] ums: set state 1

<6>[    2.505340] [CABLE] usb_status_notifier_func: cable_type = 1

<6>[    2.505432] [CABLE] Send to: usb_tp_connected

<6>[    2.505523] Touch: cable change to 1

<6>[    2.505676] [CABLE] Send to: htc_battery_8x60

<6>[    2.505737] [BATT] cable_status_notifier_func: charger type (1) same return. at 2440379256 (1970-01-01 00:00:02.440226685 UTC)

<7>[    2.506958] [USBH] IRQ state: b_peripheral, otgsc = 0x01200e00

<7>[    2.507110] [USBH] msm_otg_irq: portsc = 88000a05

<6>[    2.507202] [USB] portchange USB_SPEED_HIGH

<6>[    2.548065] [USB] usb_get_max_power: type = 0, maxpow = 0

<6>[    2.587127] [USB] reset

<7>[    2.589385] [USBH] IRQ state: b_peripheral, otgsc = 0x01202e00

<7>[    2.589538] [USBH] msm_otg_irq: portsc = 88000a05

<6>[    2.589630] [USB] portchange USB_SPEED_HIGH

<6>[    2.686889] s5k6aafx_vreg_disable camera vreg off

<6>[    2.687042] [Camera]Shooter_s5k6aafx_vreg_off

<6>[    2.687805] HDMI: hdmi_msm_hpd_off: (timer, clk, 5V, core, IRQ off)

<6>[    2.687957] HDMI: HDMI Core: Disable

<6>[    2.688049] hdmi_enable_5v(off): success

<6>[    2.688079] [Camera]sensor_power_disable("8901_lvs3") == 0

<6>[    2.688262] hdmi_core_power(off): success

<6>[    2.688354] HDMI: HDMI Clk: Disable

<6>[    2.688507] HDMI: HDMI Core: Disable

<6>[    2.688598] HDMI: hdmi_msm_hpd_state_work: ignored, probe failed

<6>[    2.689422] [Camera]sensor_power_disable("8901_lvs2") == 0

<6>[    2.690917] [Camera]sensor_power_disable("8058_l3") == 0

<6>[    2.691009] [CAM]s5k6aafx:kobject creat and add

<6>[    2.691192] [CAM]s5k6aafx:sysfs_create_file

<6>[    2.695983] android_usb gadget: high speed config #1: android

<6>[    2.696533] [CAM]drivers/media/video/msm/s5k6aafx.c s5k6aafx_sensor_probe:1349

<6>[    2.696685] msm_sync_init: initialized s5k6aafx

<6>[    2.696807] msm_camera_drv_start: setting camera node 1

<6>[    2.698425] [CAM]sp3d_init

<6>[    2.698699] [CAM]sp3d_probe

<6>[    2.698852] [CAM]sp3d_vreg_enable camera vreg on

<6>[    2.699005] [Camera]Shooter_sp3d_vreg_on

<6>[    2.699096] camera_sensor_power_enable_8901 8901_lvs2

<6>[    2.699493] set usb_configuration = 1

<6>[    2.699676] [Camera]sensor_power_enable("8901_lvs2", 1800) == 0

<6>[    2.699859] camera_sensor_power_enable_8901 8901_lvs3

<6>[    2.700317] [Camera]sensor_power_enable("8901_lvs3", 1800) == 0

<6>[    2.701171] [Camera]sensor_power_enable("8058_l15", 2800) == 0

<6>[    2.701843] [Camera]sensor_power_enable("8058_l10", 2800) == 0

<6>[    2.701995] [CAM]sp3d: sp3d_sensor_probe: switch clk

<6>[    2.702087] [Camera]Doing clk switch (Main Cam)

<6>[    2.707336] msm_camio_clk_enable clktype:6

<6>[    2.707427] msm_camio_clk_enable clk:0xc07b8b30

<6>[    2.707611] [CAM]sp3d_sensor_probe

<6>[    2.707885] [CAM]sp3d_spi_probe called!

<6>[    2.707977] [CAM]SP3D SPI register successed!

<6>[    2.708068] [CAM]master bus_num = 1

<6>[    3.008941] [CAM]sp3d_probe_init_sensor

<6>[    3.010223] [CAM]read 0x78, val = 7eaf

<6>[    3.011444] [CAM]read 0x13c, val = 1df

<6>[    3.011596] [CAM]sp3d_vreg_disable camera vreg off

<6>[    3.021697] [Camera]Shooter_sp3d_vreg_off

<6>[    3.023193] [CAM]sp3d:kobject creat and add

<6>[    3.023345] [CAM]sp3d:sysfs_create_file

<6>[    3.023498] msm_sync_init: initialized sp3d

<6>[    3.023559] msm_camera_drv_start: setting camera node 0

<6>[    3.025939] msm_gemini_init gemini: success

<5>[    3.027496] pmic8901_tm_probe: OK

<5>[    3.029174] tsens_tm_probe: OK

<6>[    3.031951] device-mapper: uevent: version 1.0.3

<6>[    3.033599] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com

<6>[    3.034973] cpuidle: using governor ladder

<6>[    3.035064] cpuidle: using governor menu

<3>[    3.036071] mmc0: No card detect facilities available

<6>[    3.036621] mmc0: Qualcomm MSM SDCC at 0x0000000012400000 irq 136,0 dma 18

<6>[    3.036773] mmc0: Platform slot type: MMC

<6>[    3.036865] mmc0: 8 bit data mode enabled

<6>[    3.036926] mmc0: 4 bit data mode disabled

<6>[    3.037078] mmc0: polling status mode disabled

<6>[    3.037170] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    3.037322] mmc0: Slot eject status = 0

<6>[    3.037414] mmc0: Power save feature enable = 1

<6>[    3.037475] mmc0: DM non-cached buffer at ff007000, dma_addr 0x59a41000

<6>[    3.037628] mmc0: DM cmd busaddr 0x59a41000, cmdptr busaddr 0x59a41300

<3>[    3.038116] mmc1: No card detect facilities available

<6>[    3.038665] mmc1: Qualcomm MSM SDCC at 0x0000000012180000 irq 134,0 dma 20

<6>[    3.038818] mmc1: Platform slot type: SD

<6>[    3.038909] mmc1: 8 bit data mode disabled

<6>[    3.039001] mmc1: 4 bit data mode enabled

<6>[    3.039154] mmc1: polling status mode disabled

<6>[    3.039215] mmc1: MMC clock 144000 -> 48000000 Hz, PCLK 0 Hz

<6>[    3.039367] mmc1: Slot eject status = 0

<6>[    3.039459] mmc1: Power save feature enable = 1

<6>[    3.039550] mmc1: DM non-cached buffer at ff008000, dma_addr 0x5a364000

<6>[    3.039703] mmc1: DM cmd busaddr 0x5a364000, cmdptr busaddr 0x5a364300

<4>[    3.040130] mmc_wimax_status

<4>[    3.040191] mmc_wimax_status_register

<6>[    3.040710] mmc2: Qualcomm MSM SDCC at 0x0000000012140000 irq 135,0 dma 19

<6>[    3.040863] mmc2: Platform slot type: SDIO(WiMAX)

<6>[    3.040954] mmc2: 8 bit data mode disabled

<6>[    3.041046] mmc2: 4 bit data mode enabled

<6>[    3.041198] mmc2: polling status mode disabled

<6>[    3.041259] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    3.041412] mmc2: Slot eject status = 1

<6>[    3.041503] mmc2: Power save feature enable = 1

<6>[    3.041595] mmc2: DM non-cached buffer at ff009000, dma_addr 0x5a366000

<6>[    3.041748] mmc2: DM cmd busaddr 0x5a366000, cmdptr busaddr 0x5a366300

<6>[    3.042602] mmc3: Qualcomm MSM SDCC at 0x00000000121c0000 irq 133,0 dma 21

<6>[    3.042694] mmc3: Platform slot type: N/A

<6>[    3.042846] mmc3: 8 bit data mode disabled

<6>[    3.042907] mmc3: 4 bit data mode enabled

<6>[    3.042999] mmc3: polling status mode disabled

<6>[    3.043151] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    3.043243] mmc3: Slot eject status = 1

<6>[    3.043395] mmc3: Power save feature enable = 1

<6>[    3.043457] mmc3: DM non-cached buffer at ff00a000, dma_addr 0x5a370000

<6>[    3.043548] mmc3: DM cmd busaddr 0x5a370000, cmdptr busaddr 0x5a370300

<7>[    3.045532] Registered led device: button-backlight

<7>[    3.046020] Registered led device: green

<7>[    3.046417] Registered led device: amber

<6>[    3.048828] logger: created 64K log 'log_main'

<6>[    3.049316] logger: created 256K log 'log_events'

<6>[    3.049743] logger: created 64K log 'log_radio'

<6>[    3.050170] logger: created 64K log 'log_system'

<4>[    3.051788] No device for DAI CODEC_DAI

<4>[    3.051879] No device for DAI CPU_DAI

<3>[    3.052642] msm_soc: create pcms

<6>[    3.053344] asoc: CODEC_DAI <-> CPU_DAI mapping ok

<6>[    3.055419] ALSA device list:

<6>[    3.055511]   #0: msm-audio (MSM-CARD)

<6>[    3.056274] GACT probability NOT on

<6>[    3.056365] Mirror/redirect action on

<6>[    3.056457] u32 classifier

<6>[    3.056579]     Actions configured

<6>[    3.056671] Netfilter messages via NETLINK v0.30.

<6>[    3.056854] nf_conntrack version 0.5.0 (12842 buckets, 51368 max)

<4>[    3.058166] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

<4>[    3.058319] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

<4>[    3.058410] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

<6>[    3.058837] ctnetlink v0.93: registering with nfnetlink.

<6>[    3.067535] xt_time: kernel timezone is -0000

<6>[    3.068054] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    3.068542] arp_tables: (C) 2002 David S. Miller

<6>[    3.068878] TCP cubic registered

<6>[    3.072021] NET: Registered protocol family 10

<6>[    3.078186] Mobile IPv6

<6>[    3.078277] IPv6 over IPv4 tunneling driver

<6>[    3.081420] NET: Registered protocol family 17

<6>[    3.081573] NET: Registered protocol family 15

<6>[    3.087005] Bluetooth: L2CAP ver 2.14

<6>[    3.092132] Bluetooth: L2CAP socket layer initialized

<6>[    3.092224] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    3.097717] ######## bthid_init: ########

<6>[    3.108367] ######## bthid_init: done ########

<6>[    3.119018] ThumbEE CPU extension supported.

<4>[    3.133941] local_clk_disable_reg: clock 33 status stuck at 'on' (bit 4 of 0xfa012fd4).

<6>[    3.144256] clock_late_init() disabled 140 unused clocks

<6>[    3.144653] init_watchdog: dogbark processed by apps side

<6>[    3.144836] MSM Watchdog Initialized

<6>[    3.149658] [Port list] init()

<6>[    3.149749] [Port list] Virtual Address for port_list: [(null)]

<6>[    3.149932] [Port list] Physical Address for port_list: [45E00000]

<6>[    3.151123] [Port list] port_list is NULL.

<6>[    3.151275] [Port list] packet filter is disabled.

<6>[    3.152252] Acquire 'boot-time' no_halt_lock 60s

<6>[    3.155883] msm_sleep_stats: Initializing sleep stats for CPU[0]

<6>[    3.156311] msm_sleep_stats: Initializing sleep stats for CPU[1]

<6>[    3.156677] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0

<3>[    3.168914] card->ext_csd.sectors =4718592

<6>[    3.170135] mmc0: new high speed MMC card at address 0001

<6>[    3.170959] mmcblk0: mmc0:0001 KLL00M 2.25 GiB

<4>[    3.173706] check_partition: Allocate memory for SD/eMMC card partition description (Once)

<6>[    3.173858]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33

<6>[    3.201934] input: htc_headset as /devices/platform/pm8058-core.0/pm8058-othc.2/input/input6

<6>[    3.203216] pm8058-rtc pm8058-rtc: setting system clock to 2011-08-23 12:00:30 UTC (1314100830)

<4>[    3.203704] Warning: unable to open an initial console.

<4>[    3.204132]  p34 >

<6>[    3.220947] msm_sdcc_setup_vreg: Enabling SD slot power

<3>[    3.222106] init: /init.shooter.rc: 126: invalid service name 'wimaxDumpLastKmsg'

<3>[    3.222381] init: /init.shooter.rc: 173: invalid option 'disable'

<3>[    3.222473] init: /init.shooter.rc: 173: invalid option 'start'

<4>[    3.345977] mmc1: high speed mode max_dtr = 50000000

<3>[    3.346801] msm_sdc3_get_wpswitch:Failed to request GPIO 251

<4>[    3.346954] mmc1: host does not support reading read-only switch. assuming write-enable.

<6>[    3.347045] mmc1: new high speed SDHC card at address e624

<6>[    3.347991] mmcblk1: mmc1:e624 SU08G 7.40 GiB

<6>[    3.348815]  mmcblk1: p1

<4>[    3.355529] msmsdcc_set_ios [WiMAX] mmc2 enable_irq

<4>[    3.399108] msmsdcc_set_ios [WiMAX] mmc2 disable_irq

<6>[    3.437164] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)

<6>[    3.619079] [BATT] ID=1, level=10, vol=3550, temp=300, curr=0, dis_curr=0, chg_src=1, chg_en=0, over_vchg=0 at 3553460580 (2011-08-23 12:00:30.915647030 UTC)

<6>[    3.949859] EXT4-fs (mmcblk0p24): recovery complete

<6>[    3.956604] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: nodelalloc

<6>[    4.072692] EXT4-fs (mmcblk0p25): recovery complete

<6>[    4.087066] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: nodelalloc

<6>[    4.160888] EXT4-fs (mmcblk0p28): recovery complete

<6>[    4.175231] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: nodelalloc

<3>[    4.268432] init: There is no cw property file /data/cw.prop.

<6>[    4.270324] keychord: using input dev h2w headset for fevent

<6>[    4.270812] keychord: using input dev shooter-keypad for fevent

<6>[    4.271057] keychord: using input dev dummy_keypad for fevent

<3>[    4.505218] init: There is no cw property file /data/cw.prop.

<6>[    4.508178] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.508361] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.508422] [Port list] port_list is NULL.

<3>[    4.600524] init: cannot find '/system/bin/rild_ims', disabling 'ril-ims-daemon'

<3>[    4.601959] init: cannot find '/system/bin/htcfs', disabling 'htcfs'

<3>[    4.603973] init: cannot find '/system/bin/load-modem.sh', disabling 'load-modem'

<3>[    4.604370] init: cannot find '/system/bin/qmuxd', disabling 'qmuxd'

<3>[    4.604675] init: cannot find '/system/bin/netmgrd', disabling 'netmgrd'

<3>[    4.605041] init: cannot find '/system/bin/wimaxDaemon', disabling 'wimaxDaemon'

<3>[    4.605346] init: cannot find '/system/bin/wimax_mtd', disabling 'wimax_mtd'

<3>[    4.605712] init: cannot find '/system/bin/setWiMAXPropDaemond', disabling 'setWMXPropd'

<3>[    4.606109] init: cannot find '/system/bin/getWiMAXPropDaemond', disabling 'getWMXPropd'

<3>[    4.606445] init: cannot find '/system/bin/dmagent', disabling 'dmagent'

<3>[    4.606750] init: cannot find '/system/bin/hdmid', disabling 'hdmid'

<3>[    4.607147] init: cannot find '/system/bin/htcbatt', disabling 'htcbatt'

<3>[    4.607452] init: cannot find '/system/bin/3D_calibration', disabling '3d_camera'

<3>[    4.607818] init: cannot find '/system/bin/DxDrmServerIpc', disabling 'dx_drm_server'

<3>[    4.678192] init: service 'console' requires console

<6>[    4.678741] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.678894] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.678985] [Port list] port_list is NULL.

<3>[    4.681152] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'

<3>[    4.681457] init: cannot find '/system/bin/htc_ebdlogd', disabling 'htc_ebdlogd'

<6>[    4.683288] enabling adb

<6>[    4.683746] [USB] msm72k_udc: ONLINE -> RESET

<6>[    4.683837] [USB] reset controller

<6>[    4.683990] [USBH] otg_reset

<6>[    4.684387] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.684478] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.684631] [Port list] port_list is NULL.

<6>[    4.684906] adb_open

<6>[    4.686950] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.687042] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.687194] [Port list] port_list is NULL.

<6>[    4.719360] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.719451] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.719604] [Port list] port_list is NULL.

<6>[    4.738220] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.738464] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.738586] [Port list] port_list is NULL.

<6>[    4.784820] warning: `rild' uses 32-bit capabilities (legacy support in use)

<6>[    4.795257] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.795440] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.795501] [Port list] port_list is NULL.

<6>[    4.868957] [USBH] otg_reset: mode:0x00000012

<6>[    4.884216] [Port list] Virtual Address of port_list: [(null)]

<6>[    4.884368] [Port list] Physical Address of port_list: [45E00000]

<6>[    4.884460] [Port list] port_list is NULL.

<6>[    4.975006] [USB] ulpi: write 0x06 to 0x36

<6>[    4.975128] [USB] ulpi: write 0x0c to 0x31

<6>[    4.975219] [USB] ulpi: write 0x31 to 0x32

<6>[    4.975372] [USB] ulpi: write 0x01 to 0x0e

<6>[    4.975463] [USB] ulpi: write 0x01 to 0x11

<6>[    4.975555] [USB] usb: notify offline

<6>[    4.976379] [USBDIAG] diag_function_disable: dev=diag

<6>[    4.976715] adb_release

<6>[    4.977691] adb_open

<6>[    4.978363] [USB] msm72k_pullup_internal: pullup

<6>[    4.978454] [USB] msm72k_udc: RESET -> ONLINE

<6>[    4.981903] [USB] suspend

<6>[    4.982116] [USB] usb_get_max_power: type = 0, maxpow = 0

<6>[    5.164855] [USB] reset

<7>[    5.167114] [USBH] IRQ state: b_peripheral, otgsc = 0x01200e00

<7>[    5.167297] [USBH] msm_otg_irq: portsc = 88000a05

<6>[    5.167388] [USB] portchange USB_SPEED_HIGH

<6>[    5.247222] [USB] reset

<7>[    5.249511] [USBH] IRQ state: b_peripheral, otgsc = 0x01200e00

<7>[    5.249603] [USBH] msm_otg_irq: portsc = 88000a05

<6>[    5.249755] [USB] portchange USB_SPEED_HIGH

<6>[    5.340698] [AUD] htc-acoustic: open

<6>[    5.356689] android_usb gadget: high speed config #1: android

<6>[    5.356903] adb_function_set_alt: maxsize = 512

<6>[    5.357086] set usb_configuration = 1

<6>[    5.357788] [AUD] htc-acoustic: release

<6>[    5.379333] [AUD] snd_soc_msm8x60: [ALSA] msm_set_voice_rx_vol: volume 100

<6>[    5.456298] [SMD] smd_alloc_channel() 'DAL_AQ_VID' cid=6 size=08192, [Stream mode]

<6>[    5.457427] [SMD] smd_alloc_channel() 'DAL_AQ_AUD' cid=7 size=08192, [Stream mode]

<6>[    5.458312] [SMD] smd_alloc_channel() 'DIAG' cid=9 size=08192, [Package mode]

<6>[    5.459045] [SMD] SMD: ch 9 0 -> 1

<6>[    5.459136] diag opened SMD port pdev->id=1; r = 0 ch=0

<6>[    5.459228] [SMD] SMD: ch 9 1 -> 2

<6>[    5.459503] [SMD] smd_alloc_channel() 'DAL00' cid=10 size=08192, [Stream mode]

<6>[    5.460388] [SMD] smd_alloc_channel() 'DIAG_CNTL' cid=11 size=01024, [Package mode]

<6>[    5.475555] [SMD] smd_alloc_channel() 'apr_audio_svc' cid=13 size=08192, [Package mode]

<6>[    5.476531] [AUD] apr_tal: apr_tal:Q6 Is Up

<6>[    6.325866] [Port list] Virtual Address of port_list: [(null)]

<6>[    6.326019] [Port list] Physical Address of port_list: [45E00000]

<6>[    6.326110] [Port list] port_list is NULL.

<6>[    6.432617] TZ_HTC_SVC_MEMPROT ret = 0

<3>[    6.688568] Notify: smsm init

<6>[    6.688659] _smem_log_init: no power log or log_idx allocated

<6>[    6.756652] [SMD] smd_alloc_channel() 'RPCCALL' cid=2 size=08192, [Stream mode]

<6>[    6.757415] [SMD] SMD: ch 2 0 -> 1

<6>[    6.757568] [SMD] SMD: ch 2 1 -> 2

<6>[    6.770172] msm_rpcrouter_create_server_pdev: rs3000fe00

<6>[    6.771789] msm_rpcrouter_create_server_pdev: rs300000a7

<6>[    6.772521] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000

<6>[    6.772644] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000

<6>[    6.773742] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized

<6>[    6.778533] rmt_storage_event_open_cb: open callback received

<6>[    6.778656] open partition /boot/modem_fs1

<6>[    6.779418] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received

<6>[    6.779998] rmt_storage_event_user_data_cb: send user data callback received

<6>[    6.780578] rmt_storage_event_open_cb: open callback received

<6>[    6.780670] open partition /boot/modem_fs2

<6>[    6.781249] rmt_storage_event_user_data_cb: send user data callback received

<6>[    6.781768] rmt_storage_event_open_cb: open callback received

<6>[    6.781951] open partition /boot/modem_fsg

<6>[    6.782440] rmt_storage_event_user_data_cb: send user data callback received

<6>[    6.783081] rmt_storage_event_open_cb: open callback received

<6>[    6.783203] open partition /boot/radio_config

<6>[    6.783782] rmt_storage_event_user_data_cb: send user data callback received

<6>[    6.784271] rmt_storage_event_read_iovec_cb: read iovec callback received

<6>[   11.386657] [DISP]init_complete_handler()

<3>[   14.191101] pm_runtime: fail to wake up

<3>[   14.288757] pm_runtime: fail to wake up

<6>[   14.289672] mdp4_overlay_pipe_alloc: pipe=c07ee0d8 ndx=1 num=0 share=0 cnt=0 pid=184 mixer=0

<6>[   14.289672] mdp4_overlay_update_dsi_cmd: blt_base=42521000

<7>[   14.303771] [DISP]brightness orig=83, transformed=46

<3>[   14.424468] pm_runtime: fail to wake up

<7>[   14.447448] [LS][ISL29029] lightsensor_open

<7>[   14.447845] [LS][ISL29029] lightsensor_ioctl cmd 1

<7>[   14.448211] [LS][ISL29029] lightsensor_release

<7>[   14.487213] [PS][ISL29029] psensor_open

<7>[   14.487457] [PS][ISL29029] psensor_ioctl cmd 1

<7>[   15.207885] [PS][ISL29029] psensor_ioctl cmd 2

<6>[   15.208099] [PS][ISL29029] psensor_disable

<7>[   15.208496] [PS][ISL29029] psensor_disable: already disabled

<7>[   15.208709] [PS][ISL29029] psensor_release

<6>[   15.209106] [PS][ISL29029] psensor_disable

<7>[   15.209320] [PS][ISL29029] psensor_disable: already disabled

<6>[   16.445312] [Port list] Virtual Address of port_list: [(null)]

<6>[   16.445465] [Port list] Physical Address of port_list: [45E00000]

<6>[   16.445556] [Port list] port_list is NULL.

<6>[   16.445831] [Port list] Virtual Address of port_list: [(null)]

<6>[   16.445892] [Port list] Physical Address of port_list: [45E00000]

<6>[   16.446044] [Port list] port_list is NULL.

<6>[   20.173767] [BATT] ID=1, level=10, vol=3550, temp=300, curr=0, dis_curr=0, chg_src=1, chg_en=0, over_vchg=0 at 20107310937 (2011-08-23 12:00:47.459856573 UTC)

<6>[   20.208007] [VIB]er.ServerThread(parent:zygote): vibrates 0 msec

<6>[   20.419921] [AUD] snd_soc_msm8x60: [ALSA] msm_set_voice_rx_vol: volume 80

<6>[   20.734649] [VIB]er.ServerThread(parent:zygote): vibrates 0 msec

<6>[   20.741333] [VIB]Thread-44(parent:zygote): vibrates 1 msec

<6>[   20.741607] [ATS][set_vibration][successful]

<6>[   20.742492] [VIB]pmic8058_vib_timer_func

<7>[   20.747100] [LS][ISL29029] lightsensor_open

<7>[   20.747344] [LS][ISL29029] lightsensor_ioctl cmd 2

<6>[   20.747436] [LS][ISL29029] lightsensor_enable

<6>[   20.748229] [LS][ISL29029] ALS_ADC = 0x000, Level = 0, l_thd equal 0, h_thd = 0x14

<6>[   20.749450] request_suspend_state: wakeup (3->0) at 20682811426 (2011-08-23 12:00:48.035540167 UTC)

<7>[   20.751281] [DISP]brightness orig=102, transformed=60

<6>[   20.763488] [VIB]Thread-44(parent:zygote): vibrates 21 msec

<6>[   20.763916] [ATS][set_vibration][successful]

<6>[   20.784881] [VIB]pmic8058_vib_timer_func

<6>[   21.096588] pm8058_pwm_led_brightness_set: bank 1 brightness 1 +

<6>[   21.096832] pm8058_pwm_led_brightness_set: bank 1 brightness 1 -

<6>[   21.097045] pm8058_pwm_led_brightness_set: bank 0 brightness 0 +

<6>[   21.097106] pm8058_pwm_led_brightness_set: bank 0 brightness 0 -

<6>[   21.831939] [Port list] Virtual Address of port_list: [(null)]

<6>[   21.832061] [Port list] Physical Address of port_list: [45E00000]

<6>[   21.832214] [Port list] port_list is NULL.

<6>[   22.735076] [Port list] Virtual Address of port_list: [(null)]

<6>[   22.735260] [Port list] Physical Address of port_list: [45E00000]

<6>[   22.735351] [Port list] port_list is NULL.

<6>[   22.829284] pm8058_drvx_led_brightness_set: bank 6 brightness 255 +

<6>[   22.829528] pm8058_drvx_led_brightness_set: bank 6 brightness 255 -

<7>[   22.830383] [DISP]brightness orig=35, transformed=11

<6>[   24.326232] S1@32,695

<6>[   24.337005] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   24.429382] E1@32,695

<6>[   24.436431] [VIB]WindowManagerPo(parent:zygote): vibrates 0 msec

<6>[   24.467132] [VIB]Thread-61(parent:zygote): vibrates 10 msec

<6>[   24.467254] [ATS][set_vibration][successful]

<6>[   24.477233] [VIB]pmic8058_vib_timer_func

<6>[   24.497924] [VIB]Thread-61(parent:zygote): vibrates 30 msec

<6>[   24.498107] [ATS][set_vibration][successful]

<6>[   24.513610] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   24.528045] [VIB]pmic8058_vib_timer_func

<3>[   25.195953] init: cannot find '/system/bin/mpdecision', disabling 'mpdecision'

<6>[   26.007171] [SMD] SMD: ch 13 0 -> 1

<6>[   26.012451] [SMD] SMD: ch 13 1 -> 2

<6>[   26.012603] [AUD] apr_tal: apr_tal: SMD_EVENT_OPEN

<6>[   26.021240] [AUD][ATS][start_recording][successful] at 25954631495        (2011-08-23 12:00:53.307360236 UTC)

<6>[   26.021423] [AUD] pcm_in: pcm_in_open: pcm in open session id[1]

<6>[   26.030059] [AUD] pcm_in: [pcm_in.c:pcm_in_release] release session id[1]

<6>[   26.030242] [SMD] smd_close(apr_audio_svc)

<6>[   26.030334] [AUD][ATS][stop_recording][successful] at 25963725733         (2011-08-23 12:00:53.316454474 UTC)

<6>[   26.109954] [SMD] SMD: ch 13 0 -> 1

<6>[   26.110198] [SMD] SMD: ch 13 1 -> 2

<6>[   26.110260] [AUD] apr_tal: apr_tal: SMD_EVENT_OPEN

<6>[   26.115417] [AUD][ATS][start_recording][successful] at 26048808740        (2011-08-23 12:00:53.401506964 UTC)

<6>[   26.115570] [AUD] pcm_in: pcm_in_open: pcm in open session id[1]

<6>[   26.115875] [msm8x60.c:msm_device_put] device speaker_mono_tx set 1

<6>[   26.115966] [AUD] snd_soc_msm8x60: [ALSA] msm_en_device (dev speaker_mono_tx, id 4, enable 1, opened 0)

<6>[   26.116119] [AUD][msm8x60.c:msm_device_put] device freq =48000

<6>[   26.116729] [AUD] board_shooter_audio: shooter_snddev_imic_pamp_on 1

<6>[   26.116851] [AUD] board_shooter_audio: shooter_snddev_bmic_pamp_on 1

<6>[   26.117492] [AUD] spi_aic3254: aic3254_set_mode: AIC3254_CONFIG_TX mode = 15

<6>[   26.117553] [AUD] spi_aic3254: uplink wakeup len(-1)

<6>[   26.119720] [AUD] spi_aic3254: uplink TX 15 len(-1)

<6>[   26.121826] [AUD] q6afe: afe_open: 1 48000

<6>[   26.121917] [AUD] q6afe: afe_open: Register AFE

<6>[   26.127288] [AUD] snd_soc_msm8x60: [ALSA] msm_route_stream: session 1, dev 4, enable 1

<3>[   26.131134] [AUD] q6adm: send_cal: No calibration data to send!

<3>[   26.131225] [AUD] q6adm: send_cal: No calibration data to send!

<6>[   26.134063] pcm_in_ioctl: AUDIO_START session id[1]

<6>[   29.624420] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   29.752868] [VIB]WindowManagerPo(parent:zygote): vibrates 0 msec

<6>[   29.758087] [VIB]WindowManagerPo(parent:zygote): vibrates 0 msec

<6>[   29.762725] [VIB]Thread-66(parent:zygote): vibrates 1 msec

<6>[   29.762878] [ATS][set_vibration][successful]

<6>[   29.763854] [VIB]pmic8058_vib_timer_func

<6>[   29.784484] [VIB]Thread-66(parent:zygote): vibrates 21 msec

<6>[   29.784698] [ATS][set_vibration][successful]

<6>[   29.785095] Touch: calibration confirm

<6>[   29.800659] Touch Status: 0x01 0x50 0x4F 0xEE 0xF3

<6>[   29.805603] [VIB]pmic8058_vib_timer_func

<6>[   29.808959] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   29.825653] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   30.514434] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   30.680206] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   31.137054] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   32.713958] call alarm, type 1, func alarm_triggered+0x0/0xb0, 1314100860000000000 (s 1314100860000000000)

<6>[   33.547088] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[   33.549224] [VIB]Thread-67(parent:zygote): vibrates 10 msec

<6>[   33.549682] [ATS][set_vibration][successful]

<6>[   33.559509] [VIB]pmic8058_vib_timer_func

<6>[   33.562561] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   33.579895] [VIB]Thread-67(parent:zygote): vibrates 30 msec

<6>[   33.580017] [ATS][set_vibration][successful]

<6>[   33.610015] [VIB]pmic8058_vib_timer_func

<6>[   33.843811] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   36.136810] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   37.528686] [CAM]htcwc_value = 0

<6>[   37.626068] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[   37.631805] [VIB]Thread-69(parent:zygote): vibrates 10 msec

<6>[   37.631958] [ATS][set_vibration][successful]

<6>[   37.641937] [VIB]pmic8058_vib_timer_func

<6>[   37.642272] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   37.662475] [VIB]Thread-69(parent:zygote): vibrates 30 msec

<6>[   37.662658] [ATS][set_vibration][successful]

<6>[   37.692596] [VIB]pmic8058_vib_timer_func

<6>[   37.743164] msm_open_common: open control1

<6>[   37.743255] msm_open_common: rc 0

<6>[   37.743347] msm_open_control: rc 0

<6>[   37.805114] msm_open_common: open config1

<6>[   37.808685] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   37.832031] msm_camio_clk_enable clktype:6

<6>[   37.832122] msm_camio_clk_enable clk:0xc07b8b30s5k6aafx_regs.reset_init after 0xC050E220

<6>[   37.832489] [CAM]s5k6aafx_vreg_enable camera vreg on

<6>[   37.832580] [Camera]Shooter_s5k6aafx_vreg_on

<6>[   38.712402] [Camera]sensor_power_enable("8058_l3", 2850) == 0

<6>[   38.717590] camera_sensor_power_enable_8901 8901_lvs2

<6>[   39.200500] binder: release 363:363 transaction 2822 out, still active

<6>[   40.339172] [Camera]sensor_power_enable("8901_lvs2", 1800) == 0

<6>[   40.344268] camera_sensor_power_enable_8901 8901_lvs3

<6>[   40.615875] [Camera]sensor_power_enable("8901_lvs3", 1800) == 0

<6>[   40.627929] [CAM]s5k6aafx: s5k6aafx_sensor_probe switch clk

<6>[   40.628082] [Camera]Doing clk switch (2nd Cam)

<6>[   40.628173] [CAM]s5k6aafx: MCLK enable clk

<6>[   40.628326] msm_camio_clk_enable clktype:6

<6>[   40.628448] msm_camio_clk_enable clk:0xc07b8b30

<3>[   41.126708] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   42.929107] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   42.930694] [VIB]Binder Thread #(parent:zygote): vibrates 0 msec

<6>[   42.969573] [VIB]Thread-74(parent:zygote): vibrates 10 msec

<6>[   42.969726] [ATS][set_vibration][successful]

<6>[   42.979675] [VIB]pmic8058_vib_timer_func

<6>[   43.000335] [VIB]Thread-74(parent:zygote): vibrates 30 msec

<6>[   43.000579] [ATS][set_vibration][successful]

<6>[   43.030517] [VIB]pmic8058_vib_timer_func

<6>[   43.086914] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   44.829162] set mipi sensor clk

<6>[   44.832916] [CAM]s5k6aafx_sensor_open_init: pre_snap_conf_init

<6>[   45.060363] [CAM]s5k6aafx_sensor_read_id

<6>[   45.061096] [CAM]s5k6aafx: model_id = 0x6aa

<6>[   45.061187] __msm_open: vfe_init

<6>[   45.061340] vfe31_init

<6>[   45.061584] msm_camio_clk_enable clktype:2

<6>[   45.061737] msm_camio_clk_enable clktype:8

<6>[   45.061920] msm_camio_clk_enable clktype:9

<6>[   45.062133] msm_camio_clk_enable clktype:11

<6>[   45.062316] msm_camio_clk_enable clktype:12

<6>[   45.062530] msm_camio_clk_enable clktype:13

<6>[   45.062713] msm_camio_clk_enable clktype:10

<6>[   45.062866] msm_camio_clk_enable clktype:14

<6>[   45.063110] msm_camio_clk_enable clktype:15

<6>[   45.087768] msm_camio_set_perf_lvl: S_INIT rc = 3617192864

<6>[   45.092742] msm_camio_set_perf_lvl: S_PREVIEW rc = 0

<6>[   45.093627] msm_camio_clk_enable clktype:18

<6>[   45.093872] msm_camio_clk_enable clktype:19

<6>[   45.094573] msm_open_common: rc 0

<6>[   45.096343] msm_release_config: config1

<6>[   45.096557] __msm_release, open count =1

<6>[   45.097045] msm_release_config: draining queue event

<6>[   45.097259] msm_release_config, completed

<3>[   46.136718] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   48.392303] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   48.567810] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   51.136718] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   55.326843] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   55.584411] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   55.595245] binder: release 437:451 transaction 4489 out, still active

<3>[   56.126800] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   58.851379] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   58.991607] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   60.736877] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   60.894622] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   61.136688] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   63.156707] Release 'boot-time' no_halt_lock

<6>[   63.732818] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   63.969635] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   66.136718] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   66.289428] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[   66.304931] [VIB]Thread-78(parent:zygote): vibrates 10 msec

<6>[   66.305084] [ATS][set_vibration][successful]

<6>[   66.305603] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   66.315032] [VIB]pmic8058_vib_timer_func

<6>[   66.335571] [VIB]Thread-78(parent:zygote): vibrates 30 msec

<6>[   66.335693] [ATS][set_vibration][successful]

<6>[   66.365692] [VIB]pmic8058_vib_timer_func

<6>[   66.560455] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   68.703765] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[   68.704864] [VIB]Thread-79(parent:zygote): vibrates 10 msec

<6>[   68.704986] [ATS][set_vibration][successful]

<6>[   68.714965] [VIB]pmic8058_vib_timer_func

<6>[   68.719848] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   68.735626] [VIB]Thread-79(parent:zygote): vibrates 30 msec

<6>[   68.735870] [ATS][set_vibration][successful]

<6>[   68.765808] [VIB]pmic8058_vib_timer_func

<6>[   68.930603] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   71.136749] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[   76.136749] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   77.645690] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   78.234954] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   79.617919] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   80.182067] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   81.136749] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   81.425170] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   81.656738] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[   84.597045] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   84.737091] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   86.126708] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   89.504425] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   89.856048] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[   91.136749] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   92.713897] call alarm, type 1, func alarm_triggered+0x0/0xb0, 1314100920000000000 (s 1314100920000000000)

<3>[   96.136779] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[   99.230712] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[   99.239013] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[  101.129760] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[  106.131652] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[  111.132293] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[  116.126647] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[  121.133209] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<3>[  123.655822] init: untracked pid 601 exited

<3>[  126.131042] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[  127.425445] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  127.662475] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[  129.601318] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  129.609649] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<6>[  130.105102] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[  130.106506] [VIB]Thread-80(parent:zygote): vibrates 10 msec

<6>[  130.106750] [ATS][set_vibration][successful]

<6>[  130.116638] [VIB]pmic8058_vib_timer_func

<6>[  130.121551] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  130.138092] [VIB]Thread-80(parent:zygote): vibrates 30 msec

<6>[  130.138366] [ATS][set_vibration][successful]

<6>[  130.168365] [VIB]pmic8058_vib_timer_func

<6>[  130.188323] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[  131.136657] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[  135.178680] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  135.327453] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[  136.136657] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[  140.836853] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[  140.840026] [VIB]Thread-81(parent:zygote): vibrates 10 msec

<6>[  140.840270] [ATS][set_vibration][successful]

<6>[  140.850280] [VIB]pmic8058_vib_timer_func

<6>[  140.852233] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  140.871215] [VIB]Thread-81(parent:zygote): vibrates 30 msec

<6>[  140.871643] [ATS][set_vibration][successful]

<6>[  140.901641] [VIB]pmic8058_vib_timer_func

<6>[  141.027740] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[  141.126647] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed

<6>[  142.307708] [VIB]InputReader(parent:zygote): vibrates 0 msec

<6>[  142.310058] [VIB]Thread-82(parent:zygote): vibrates 10 msec

<6>[  142.310211] [ATS][set_vibration][successful]

<6>[  142.320159] [VIB]pmic8058_vib_timer_func

<6>[  142.323455] Touch Status: 0x01 0x40 0x4F 0xEE 0xF3

<6>[  142.340576] [VIB]Thread-82(parent:zygote): vibrates 30 msec

<6>[  142.340728] [ATS][set_vibration][successful]

<6>[  142.370697] [VIB]pmic8058_vib_timer_func

<6>[  142.516479] Touch Status: 0x01 0x00 0x4F 0xEE 0xF3

<3>[  146.136047] [AUD] pcm_in: pcm_in_read: wait_event_timeout failed